Pull phy fixes from Vinod Koul:
"A bunch of driver fixes:
- Freescale typec orientation switch fix, clearing register fix,
assertion of phy reset during power on
- Qualcomm pcs register clear before using
- stm one off fix
- TI runtimepm error handling, regmap leak fixes
- Rockchip gadget mode disconnection and disruption fixes
- Tegra register level fix
- Broadcom pointer cast warning fix"
* tag 'phy-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: freescale: imx8m-pcie: assert phy reset during power on
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)
phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7
phy: rockchip: inno-usb2: fix communication disruption in gadget mode
phy: rockchip: inno-usb2: fix disconnection in gadget mode
phy: ti: gmii-sel: fix regmap leak on probe failure
phy: sparx5-serdes: make it selectable for ARCH_LAN969X
phy: ti: da8xx-usb: Handle devm_pm_runtime_enable() errors
phy: stm32-usphyc: Fix off by one in probe()
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300
phy: fsl-imx8mq-usb: fix typec orientation switch when built as module
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 6.19-rc6
Included in here are:
- new usb-serial device ids
- dwc3-apple driver fixes to get things working properly on that
hardware platform
- ohci/uhci platfrom driver module soft-deps with ehci to remove a
runtime warning that sometimes shows up on some platforms.
- quirk for broken devices that can not handle reading the BOS
descriptor from them without going crazy.
- usb-serial driver fixes
- xhci driver fixes
- usb gadget driver fixes
All of these except for the last xhci fix has been in linux-next for a
while. The xhci fix has been reported by others to solve the issue for
them, so should be ok"
* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
usb: gadget: uvc: return error from uvcg_queue_init()
usb: gadget: uvc: fix interval_duration calculation
usb: gadget: uvc: fix req_payload_size calculation
usb: dwc3: apple: Ignore USB role switches to the active role
usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
USB: OHCI/UHCI: Add soft dependencies on ehci_platform
usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
tcpm: allow looking for role_sw device in the main node
usb: dwc3: Check for USB4 IP_NAME
Pull sound fixes from Takashi Iwai:
"This became a bit larger than wished for, often seen as a bump at the
middle, but almost all changes are small device-specific fixes, so the
risk must be pretty low.
- SoundWire fix for missing symbol export
- Fixes for device-tree bindings
- A fix for OOB access in USB-audio, spotted by fuzzer
- Quirks for HD-audio, SoundWire, AMD ACP
- A series of ASoC tlv320 and wsa codec fixes
- Other misc fixes in PCM OSS error-handling, Cirrus scodec test,
ASoC ops endianess, davinci, simple-card, and tegra"
* tag 'sound-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/tas2781: Add newly-released HP laptop
ASoC: rt5640: Fix duplicate clock properties in DT binding
ALSA: hda/realtek: Add quirk for HP Pavilion x360 to enable mute LED
ASoC: tlv320adcx140: fix word length
ASoC: tlv320adcx140: Propagate error codes during probe
ASoC: tlv320adcx140: fix null pointer
ASoC: tlv320adcx140: invert DRE_ENABLE
ASoC: sdw_utils: cs42l43: Enable Headphone pin for LINEOUT jack type
ASoC: sdw_utils: Call init callbacks on the correct codec DAI
soundwire: Add missing EXPORT for sdw_slave_type
ALSA: usb-audio: Prevent excessive number of frames
ALSA: hda/cirrus_scodec_test: Fix test suite name
ALSA: hda/cirrus_scodec_test: Fix incorrect setup of gpiochip
ALSA: hda/realtek: Add quirk for Asus Zephyrus G14 2025 using CS35L56, fix speakers
ASoC: amd: yc: Fix microphone on ASUS M6500RE
ASoC: tegra: Revert fix for uninitialized flat cache warning in tegra210_ahub
ASoC: dt-bindings: rockchip-spdif: Allow "port" node
ASoC: dt-bindings: realtek,rt5640: Allow 7 for realtek,jack-detect-source
ASoC: dt-bindings: realtek,rt5640: Add missing properties/node
ASoC: dt-bindings: realtek,rt5640: Document port node
...
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes a problem with soc_sdw_utils.c calling the wrong
codec init callbacks, because it assumed that the DAI name could be
used to uniquely identify the codec. This isn't the case, especially
on SDCA which is a generic driver for many parts.
The first patch is needed to add a missing export to SoundWire core.
Pull SCSI fixes from James Bottomley:
"Only one core change (and one in doc only) the rest are drivers.
The one core fix is for some inline encrypting drives that can't
handle encryption requests on non-data commands (like error handling
ones); it saves the request level encryption parameters in the eh_save
structure so they can be cleared for error handling and restored after
it is completed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: host: mediatek: Make read-only array scale_us static const
scsi: bfa: Update outdated comment
scsi: mpt3sas: Update maintainer list
scsi: ufs: core: Configure MCQ after link startup
scsi: core: Fix error handler encryption support
scsi: core: Correct documentation for scsi_test_unit_ready()
scsi: ufs: dt-bindings: Fix several grammar errors
Merge series from Jon Hunter <jonathanh@nvidia.com>:
This series includes fixes for the realtek,rt5640 dt-binding to address
a few warnings that are observed when running the CHECK_DTBS=y for some
DTBs that use this codec.
The brcm,iproc-nic-i2c variant has 2 reg entries.
The second one is related to the brcm,ape-hsls-addr-mask property, but it's
not clear what a proper description would be.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
Various boards that use the rt5640 audio codec define a 'port' child
node under the codec node to describe the interface between it and the
SoC that it is connected to. The binding document for the rt5640 codec
does not define the 'port' child node and so this is generating warnings
when running the DTB checks for these boards. Add the 'port' node to the
binding document for the rt5640 codec to fix this.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108143158.351223-4-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device-tree property 'realtek,jack-detect-source' currently only
permits values from 0-6. However, commit 2b9c8d2b3c ("ASoC: rt5640:
Add the HDA header support") updated the Realtek rt5640 to support
setting the 'realtek,jack-detect-source' to 7 to support the HDA header.
The Tegra234 platforms currently set 'realtek,jack-detect-source' to 7
for the HDA header and this is causing a warning when building
device-tree.
audio-codec@1c (realtek,rt5640): realtek,jack-detect-source:
7 is not one of [0, 1, 2, 3, 4, 5, 6]
Given that the driver already supports this settings, update the binding
document for the rt5640 device to add the HDA header as a valid
configuration for the 'realtek,jack-detect-source' property.
Fixes: 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108143158.351223-3-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit eba5a0bac2 ("ASoC: dt-bindings: realtek,rt5640: Convert to
dtschema") converted the rt5640 dt-binding to yaml format but in the
process dropped 'clock' and 'clock-names' properties that are used to
specify the codec 'mclk'. This is causing DTB build warnings for boards
that use this codec and define an 'mclk' in device-tree. Update the
rt5640 binding document to add the optional mclk.
Fixes: eba5a0bac2 ("ASoC: dt-bindings: realtek,rt5640: Convert to dtschema")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108143158.351223-2-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX fixes for 6.19:
- A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger
type
- An i.MX95 fix from Carlos Song to correct I3C2 pclk
- A couple of imx8qm-mek changes from Haibo Chen to fix light sensor
interrupt type and usdhc2 regulator configuration
- An imx6q-ba16 change from Ian Ray to fix RTC interrupt level
- An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet
link bouncing caused by interruptions on the PHY reference clock
- A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible
and eqos nvmem-cells
- An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names
- An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for
LPUART
- A couple of imx95-toradex-smarc changes from Vitor Soares to fix
ethphy1 interrupt and SMARC_SDIO_WP label position
* tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to the reference manual, MSM8994 does have QUSB2 PHY and does
not have DP/DM IRQs interrupts. It is also logical it has the same
constraints as similar device: MSM8996.
This fixes dtbs_check warnings like:
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:1: 'hs_phy_irq' was expected
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:2: 'dp_hs_phy_irq' was expected
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:3: 'dm_hs_phy_irq' was expected
Fixes: 53c6d854be ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Fixes: 6e762f7b8e ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260106185012.19551-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge series from Johan Hovold <johan@kernel.org>:
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
This series fixes the Qualcomm wsa88xx codec drivers that do unnecessary
reinitialisation or potentially fail to initialise at all.
Included is also a related clean up suppressing a related codec variant
printk.
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 24e67d28ef ("dt-bindings: arm: fsl: Add GOcontroll Moduline Display")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Add new compatible strings for the new controllers.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251221110513.1850535-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull spi fixes from Mark Brown:
"A small collection of fixes for various SPI drivers, plus a relaxation
of constraints in the DT for the DesignWare controller to reflect
hardware that's been seen.
There's several fixes for the Cadence QuadSPI driver since a fix
during the last release made some existing issues with error handling
during probe more readily visible"
* tag 'spi-fix-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mt65xx: Use IRQF_ONESHOT with threaded IRQ
spi: dt-bindings: snps,dw-abp-ssi: Allow up to 16 chip-selects
spi: cadence-quadspi: Fix clock disable on probe failure path
spi: cadence-quadspi: Add error logging for DMA request failure
spi: fsl-cpm: Check length parity before switching to 16 bit mode
spi: mpfs: Fix an error handling path in mpfs_spi_probe()
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Pull input updates from Dmitry Torokhov:
- DT bindings for Melfas MIP4 touchscreen controller and TWL4030 keypad
have been converted to the DT schema
- simple touch controller bindings have been consolidated to
trivial-touch.yaml DT schema
- memory allocation failure noise was removed from qnap-mcu-input and
zforce_ts dirvers
- ti_am335x_tsc driver was hardened to handle invalid (too large)
number of coordinates specified in device tree
- a cleanup in Cypress cyttsp5 driver to use %pe to print error code
* tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - clamp coordinate_readouts to DT maximum (6)
dt-bindings: touchscreen: consolidate simple touch controller to trivial-touch.yaml
dt-bindings: touchscreen: trivial-touch: add reset-gpios and wakeup-source
dt-bindings: input: ti,twl4030-keypad: convert to DT schema
Input: zforce_ts - omit error message when memory allocation fails
Input: qnap-mcu-input - omit error message when memory allocation fails
dt-bindings: input: Convert MELFAS MIP4 Touchscreen to DT schema
dt-bindings: touchscreen: move ar1021.txt to trivial-touch.yaml
dt-bindings: touchscreen: rename maxim,max11801.yaml to trivial-touch.yaml
Input: cyttsp5 - use %pe format specifier
Pull i2c updates from Wolfram Sang:
- general cleanups in bcm2835, designware, pcf8584, and stm32
- amd-mp2: fix device refcount
- designware: avoid interrupt storms caused by bad firmware
- spacemit: fix device detection failures
- new devices: Intel Diamond Rapids, Rockchip RK3506, Qualcomm
Kaanapali and MSM8953
- minor fixes to i801, core documentation, elektor Kconfig dependencies
- at24 updates: add new compatible for Belling BL24S64
* tag 'i2c-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (21 commits)
i2c: qcom-cci: Add msm8953 compatible
i2c: spacemit: fix detect issue
i2c: amd-mp2: fix reference leak in MP2 PCI device
i2c: i2c.h: fix a bad kernel-doc line
i2c: i2c-elektor: Allow building on SMP kernels
dt-bindings: i2c: qcom-cci: Document Kaanapali compatible
dt-bindings: i2c: qcom-cci: Document msm8953 compatible
dt-bindings: eeprom: at24: Add compatible for Belling BL24S64
i2c: i801: Fix the Intel Diamond Rapids features
i2c: pcf8584: Change pcf_doAdress() to pcf_send_address()
i2c: pcf8584: Make pcf_doAddress() function void
i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0.
i2c: designware: Disable SMBus interrupts to prevent storms from mis-configured firmware
dt-bindings: i2c: i2c-rk3x: Add compatible string for RK3506
i2c: i801: Add support for Intel Diamond Rapids
i2c: stm32: Omit two variable reassignments in stm32_i2c_dma_request()
i2c: designware: Omit a variable reassignment in dw_i2c_plat_probe()
i2c: pcf8584: Fix do not use assignment inside if conditional
i2c: pcf8584: Remove debug macros from i2c-algo-pcf.c
i2c: busses: bcm2835: convert from round_rate() to determine_rate()
...
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
Pull dmaengine updates from Vinod Koul:
- Renesas driver conversion to RUNTIME_PM_OPS() etc
- Dropping module alias on bunch of drivers
- GPI Block event interrupt support in Qualcomm driver and updates to
I2C driver as well
* tag 'dmaengine-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
dt-bindings: dma: xilinx: Simplify dma-coherent property
dmaengine: fsl-edma: configure tcd attr with separate src and dst settings
dmaengine: st_fdma: drop unused module alias
dmaengine: bcm2835: enable compile testing
dmaengine: tegra210-adma: drop unused module alias
dmaengine: sprd: drop unused module alias
dmaengine: mmp_tdma: drop unnecessary OF node check in remove
dmaengine: mmp_tdma: drop unused module alias
dmaengine: k3dma: drop unused module alias
dmaengine: fsl-qdma: drop unused module alias
dmaengine: fsl-edma: drop unused module alias
dmaengine: dw: drop unused module alias
dmaengine: bcm2835: drop unused module alias
dmaengine: at_hdmac: add COMPILE_TEST support
dmaengine: at_hdmac: fix formats under 64-bit
i2c: i2c-qcom-geni: Add Block event interrupt support
dmaengine: qcom: gpi: Add GPI Block event interrupt support
dmaengine: idxd: drain ATS translations when disabling WQ
dmaengine: sh: Kconfig: Drop ARCH_R7S72100/ARCH_RZG2L dependency
dmaengine: rcar-dmac: Convert to NOIRQ_SYSTEM_SLEEP/RUNTIME_PM_OPS()
...
