master
38147 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
e28ddd0b7a |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas: - Do not return false if !preemptible() in current_in_efi(). EFI runtime services can now run with preemption enabled - Fix uninitialised variable in the arm MPAM driver, reported by sparse - Fix partial kasan_reset_tag() use in change_memory_common() when calculating page indices or comparing ranges - Save/restore TCR2_EL1 during suspend/resume, otherwise the E0POE bit is lost * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix cleared E0POE bit after cpu_suspend()/resume() arm64: mm: Fix incomplete tag reset in change_memory_common() arm_mpam: Stop using uninitialized variables in __ris_msmon_read() arm64/efi: Don't fail check current_in_efi() if preemptible |
||
|
Linus Torvalds
|
e55feea3a0 |
Merge tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
|
||
|
Yeoreum Yun
|
bdf3f41760 |
arm64: Fix cleared E0POE bit after cpu_suspend()/resume()
TCR2_ELx.E0POE is set during smp_init().
However, this bit is not reprogrammed when the CPU enters suspension and
later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE
and there is no save/restore logic for the TCR2_ELx system register.
As a result, the E0POE feature no longer works after cpu_resume().
To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume()
path, rather than adding related logic to __cpu_setup(), taking into account
possible future extensions of the TCR2_ELx feature.
Fixes:
|
||
|
Jiayuan Chen
|
5fcd551307 |
arm64: mm: Fix incomplete tag reset in change_memory_common()
Running KASAN KUnit tests with {HW,SW}_TAGS mode triggers a fault in
change_memory_common():
Call trace:
change_memory_common+0x168/0x210 (P)
set_memory_ro+0x20/0x48
vmalloc_helpers_tags+0xe8/0x338
kunit_try_run_case+0x74/0x188
kunit_generic_run_threadfn_adapter+0x30/0x70
kthread+0x11c/0x200
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
# vmalloc_helpers_tags: try faulted
not ok 67 vmalloc_helpers_tags
Commit
|
||
|
Rob Herring (Arm)
|
bf104037eb |
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
"snps,tx_de_emphasis" is supposed to be a u8, not a u32. Since it is big endian, 0 will be read rather than 1. The DWC3 Linux driver simply ORs the value if "snps,tx_de_emphasis_quirk" is set, so the 2 properties have no effect. (The driver doesn't clear the field either which is another problem). "snps,gctl-reset-quirk" is not documented nor used in the driver, so drop it as well. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20260105174002.2997615-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
c221cc877b |
Merge tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.19: - A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger type - An i.MX95 fix from Carlos Song to correct I3C2 pclk - A couple of imx8qm-mek changes from Haibo Chen to fix light sensor interrupt type and usdhc2 regulator configuration - An imx6q-ba16 change from Ian Ray to fix RTC interrupt level - An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet link bouncing caused by interruptions on the PHY reference clock - A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible and eqos nvmem-cells - An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names - An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for LPUART - A couple of imx95-toradex-smarc changes from Vitor Soares to fix ethphy1 interrupt and SMARC_SDIO_WP label position * tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: mba8mx: Fix Ethernet PHY IRQ support arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells arm64: dts: freescale: moduline-display: fix compatible dt-bindings: arm: fsl: moduline-display: fix compatible ARM: dts: imx6q-ba16: fix RTC interrupt level arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt arm64: dts: add off-on-delay-us for usdhc2 regulator arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level ARM: dts: nxp: imx: Fix mc13xxx LED node names arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
902300d332 |
Merge tag 'arm-soc/for-6.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-SoC Device Tree fixes for 6.19, please pull the following: - Andrea fixes the RP1 DeviceTree hierarchy and drop overlay support, this resolves a number of DTC warnings and other issues * tag 'arm-soc/for-6.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: rp1: drop RP1 overlay arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology misc: rp1: drop overlay support dt-bindings: misc: pci1de4,1: add required reg property for endpoint Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ben Horgan
|
dd4d71f587 |
arm64/efi: Don't fail check current_in_efi() if preemptible
As EFI runtime services can now be run without disabling preemption remove
the check for non preemptible in current_in_efi(). Without this change,
firmware errors that were previously recovered from by
__efi_runtime_kernel_fixup_exception() will lead to a kernel oops.
Fixes:
|
||
|
Alexander Stein
|
89e87d0dc8 |
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
Ethernet PHY interrupt mode is level triggered. Adjust the mode
accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes:
|
||
|
Sherry Sun
|
a988caeed9 |
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
The commit |
||
|
Marek Vasut
|
c63749a7dd |
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link bouncing caused by interruptions on the PHY reference clock, by letting the PHY driver manage the reference clock and assure there are no interruptions. This follows the matching PHY driver recommendation described in commit |
||
|
Maud Spierings
|
cdf4e631ee |
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the address for it in eth_mac1, eth_mac2 seems to be left unfused. In their downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias of eqos to ethernet0, the driver then fetches the mac address based on the alias number. Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to point at eth_mac2 as it may be fused later even though it is disabled by default. With this changed barebox is now capable of loading the correct address. Link: |
||
|
Maud Spierings
|
056c688751 |
arm64: dts: freescale: moduline-display: fix compatible
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes:
|
||
|
Vitor Soares
|
15599306fb |
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
Fix the SMARC_SDIO_WP gpio-line-name position. It should be on line 15
of som_gpio_expander_1, not line 17.
Fixes:
|
||
|
Vitor Soares
|
466798368e |
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
Change the PHY interrupt trigger type from IRQ_TYPE_LEVEL_LOW to
IRQ_TYPE_EDGE_FALLING to match the PCA9745 GPIO expander hardware
capabilities and avoid emulated level detection.
Fixes:
|
||
|
Haibo Chen
|
ca643894a3 |
arm64: dts: add off-on-delay-us for usdhc2 regulator
For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.
To match such requirement on imx8qm-mek board, add 4.8ms delay between
sd power off and power on.
Fixes:
|
||
|
Haibo Chen
|
e0d8678c2f |
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
light sensor isl29023 share the interrupt with lsm303arg, but these two devices use different interrupt type. According to the datasheet of these two devides, both support low level trigger type, so correct the interrupt type here to avoid the following error log: irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000! Fixes: |
||
|
Carlos Song
|
cd0caaf200 |
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
I3C2 is in WAKEUP domain. Its pclk should be IMX95_CLK_BUSWAKEUP.
Fixes:
|
||
|
Linus Torvalds
|
d571fe47bb |
Merge tag 'devicetree-fixes-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring: - Fix warnings for Mediatek overlays not getting applied - Fix regression in handling elfcorehdr region - Fix creating cpufreq device on OPPv1 platforms - Add GE7800 GPU in Renesas R-Car V3U - Simplify dma-coherent property in TI display bindings - Allow "reg" in sprd,sc9860-clk binding - Update Linus Walleij's email * tag 'devicetree-fixes-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: arm64: dts: mediatek: Apply mt8395-radxa DT overlay at build time arm64: dts: mediatek: mt7988: add dtbs with applied overlays for bpi-r4 (pro) arm64: dts: mediatek: mt7986: add dtbs with applied overlays for bpi-r3 dt-bindings: Updates Linus Walleij's mail address dt-bindings: gpu: img,powervr-rogue: Document GE7800 GPU in Renesas R-Car V3U cpufreq: dt-platdev: Fix creating device on OPPv1 platforms dt-bindings: clock: sprd,sc9860-clk: Allow "reg" for gate clocks dt-bindings: display/ti: Simplify dma-coherent property arm64: kdump: Fix elfcorehdr overlap caused by reserved memory processing reorder |
||
|
Linus Torvalds
|
18dfd1cbf6 |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Two left-over updates that could not go into -rc1 due to conflicts
with other series:
- Simplify checks in arch_kfence_init_pool() since
force_pte_mapping() already takes BBML2-noabort (break-before-make
Level 2 with no aborts generated) into account
- Remove unneeded SVE/SME fallback preserve/store handling in the
arm64 EFI. With the recent updates, the fallback path is only taken
for EFI runtime calls from hardirq or NMI contexts. In practice,
this only happens under panic/oops/emergency_restart() and no
restoring of the user state expected.
There's a corresponding lkdtm update to trigger a BUG() or panic()
from hardirq context together with a fixup not to confuse
clang/objtool about the control flow
GCS (guarded control stacks) fix: flush the GCS locking state on exec,
otherwise the new task will not be able to enable GCS (locked as
disabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
lkdtm/bugs: Do not confuse the clang/objtool with busy wait loop
arm64/gcs: Flush the GCS locking state on exec
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context
arm64: mm: Simplify check in arch_kfence_init_pool()
|
||
|
Andrea della Porta
|
9a96cc8bbe |
arm64: dts: broadcom: rp1: drop RP1 overlay
RP1 support loaded from overlay has been dropped from the driver and the DTB intended to be loaded with the overlay no longer exists. Drop unused include file and overlay. Signed-off-by: Andrea della Porta <andrea.porta@suse.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/85167b815d41ed9ed690ad239a19de5cd2e8be1c.1766077285.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> |
||
|
Andrea della Porta
|
bc97e616a7 |
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
The node describing the RP1 endpoint currently uses a specific name
('rp1_nexus') that does not correctly reflect the PCI topology.
Update the DT with the correct topology and use generic node names.
Additionally, since the driver dropped overlay support in favor of a
fully described DT, rename '...-ovl-rp1.dts' to '...-base.dtsi' for
inclusion in the board DTB, as it is no longer compiled as a
standalone DTB.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/827b12ba48bb47bc77a0f5e5617aea961c8bc6b5.1766077285.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
||
|
Rob Herring (Arm)
|
ce7b1d5860 |
arm64: dts: mediatek: Apply mt8395-radxa DT overlay at build time
It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add missing target for mt8395-radxa hd panel overlay.
Fixes:
|
||
|
Frank Wunderlich
|
0773bc6ab7 |
arm64: dts: mediatek: mt7988: add dtbs with applied overlays for bpi-r4 (pro)
Build devicetree binaries for testing overlays and providing users full dtb without using overlays for Bananapi R4 (pro) variants. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://patch.msgid.link/20251119175124.48947-3-linux@fw-web.de Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Frank Wunderlich
|
987697749d |
arm64: dts: mediatek: mt7986: add dtbs with applied overlays for bpi-r3
Build devicetree binaries for testing overlays and providing users full dtb without using overlays. Suggested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Fixes: |
||
|
Linus Torvalds
|
5164715690 |
Merge tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers: - Fix a performance issue with the scoped_ksimd() macro (new in 6.19) where it unnecessarily initialized the entire fpsimd state. - Add a missing gitignore entry for a generated file added in 6.18. * tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crypto: riscv: Add poly1305-core.S to .gitignore arm64/simd: Avoid pointless clearing of FP/SIMD buffer |
||
|
Linus Torvalds
|
ea1013c153 |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov: - Fix BPF builds due to -fms-extensions. selftests (Alexei Starovoitov), bpftool (Quentin Monnet). - Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n (Geert Uytterhoeven) - Fix livepatch/BPF interaction and support reliable unwinding through BPF stack frames (Josh Poimboeuf) - Do not audit capability check in arm64 JIT (Ondrej Mosnacek) - Fix truncated dmabuf BPF iterator reads (T.J. Mercier) - Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu) - Fix warnings in libbpf when built with -Wdiscarded-qualifiers under C23 (Mikhail Gavrilov) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: add regression test for bpf_d_path() bpf: Fix verifier assumptions of bpf_d_path's output buffer selftests/bpf: Add test for truncated dmabuf_iter reads bpf: Fix truncated dmabuf iterator reads x86/unwind/orc: Support reliable unwinding through BPF stack frames bpf: Add bpf_has_frame_pointer() bpf, arm64: Do not audit capability check in do_jit() libbpf: Fix -Wdiscarded-qualifiers under C23 bpftool: Fix build warnings due to MS extensions net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT selftests/bpf: Add -fms-extensions to bpf build flags |
||
|
Wadim Egorov
|
cf5e8adebe |
arm64: dts: ti: k3-am62-lp-sk-nand: Rename pinctrls to fix schema warnings
Rename pinctrl nodes to comply with naming conventions required by
pinctrl-single schema.
Fixes:
|
||
|
Wadim Egorov
|
d876bb9353 |
arm64: dts: ti: k3-am642-phyboard-electra-x27-gpio1-spi1-uart3: Fix schema warnings
Rename pinctrl nodes to comply with naming conventions required by
pinctrl-single schema. Also, replace invalid integer assignment in
SPI node with a boolean to align with omap-spi schema.
Fixes:
|
||
|
Wadim Egorov
|
05bbe52d0b |
arm64: dts: ti: k3-am642-phyboard-electra-peb-c-010: Fix icssg-prueth schema warning
Reduce length of dma-names and dmas properties for icssg1-ethernet
node to comply with ti,icssg-prueth schema constraints. The previous
entries exceeded the allowed count and triggered dtschema warnings
during validation.
Fixes:
|
||
|
Mark Brown
|
98a97bf415 |
arm64/gcs: Flush the GCS locking state on exec
When we exec a new task we forget to flush the set of locked GCS mode bits.
Since we do flush the rest of the state this means that if GCS is locked
the new task will be unable to enable GCS, it will be locked as being
disabled. Add the expected flush.
Fixes:
|
||
|
Ard Biesheuvel
|
63de2b3859 |
arm64/efi: Remove unneeded SVE/SME fallback preserve/store handling
Since commit
|
||
|
Kevin Brodsky
|
b7737c38e7 |
arm64: mm: Simplify check in arch_kfence_init_pool()
TL;DR: checking force_pte_mapping() in arch_kfence_init_pool() is sufficient Commit |
||
|
Ard Biesheuvel
|
c4b502d60a |
arm64/simd: Avoid pointless clearing of FP/SIMD buffer
The buffer provided to kernel_neon_begin() is only used if the task is
scheduled out while the FP/SIMD is in use by the kernel, or when such a
section is interrupted by a softirq that also uses the FP/SIMD.
IOW, this happens rarely, and even if it happened often, there is still
no reason for this buffer to be cleared beforehand, which happens
unconditionally, due to the use of a compound literal expression.
So define that buffer variable explicitly, and mark it as
__uninitialized so that it will not get cleared, even when
-ftrivial-auto-var-init is in effect.
This requires some preprocessor gymnastics, due to the fact that the
variable must be defined throughout the entire guarded scope, and the
expression
({ struct user_fpsimd_state __uninitialized st; &st; })
is problematic in that regard, even though the compilers seem to
permit it. So instead, repeat the 'for ()' trick that is also used in
the implementation of the guarded scope helpers.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Fixes:
|
||
|
Eric Biggers
|
f6a458746f |
crypto: arm64/ghash - Fix incorrect output from ghash-neon
Commit |
||
|
Ondrej Mosnacek
|
189e5deb94 |
bpf, arm64: Do not audit capability check in do_jit()
Analogically to the x86 commit |
||
|
Ard Biesheuvel
|
6f7d948192 |
crypto/arm64: sm4/xts - Merge ksimd scopes to reduce stack bloat
Merge the two ksimd scopes in the implementation of SM4-XTS to prevent stack bloat in cases where the compiler fails to combine the stack slots for the kernel mode FP/SIMD buffers. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20251203163803.157541-6-ardb@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Ard Biesheuvel
|
a9a8b1a383 |
crypto/arm64: aes/xts - Use single ksimd scope to reduce stack bloat
The ciphertext stealing logic in the AES-XTS implementation creates a
separate ksimd scope to call into the FP/SIMD core routines, and in some
cases (CONFIG_KASAN_STACK is one, but there might be others), the 528
byte kernel mode FP/SIMD buffer that is allocated inside this scope is
not shared with the preceding ksimd scope, resulting in unnecessary
stack bloat.
Considering that
a) the XTS ciphertext stealing logic is never called for block
encryption use cases, and XTS is rarely used for anything else,
b) in the vast majority of cases, the entire input block is processed
during the first iteration of the loop,
we can combine both ksimd scopes into a single one with no practical
impact on how often/how long FP/SIMD is en/disabled, allowing us to
reuse the same stack slot for both FP/SIMD routine calls.
Fixes:
|
||
|
Linus Torvalds
|
83bd89291f |
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
||
|
Linus Torvalds
|
416f99c3b1 |
Merge tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
|
||
|
Linus Torvalds
|
11efc1cb70 |
Merge tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"These updates came a little late, or were based on a later 6.18-rc tag
than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC
drivers"
* tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
soc: fsl: qbman: use kmalloc_array() instead of kmalloc()
soc: fsl: qbman: add WQ_PERCPU to alloc_workqueue users
MAINTAINERS: Update email address for Christophe Leroy
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
...
|
||
|
Linus Torvalds
|
66a1025f7f |
Merge tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
|
||
|
Linus Torvalds
|
0cac5ce06e |
Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
||
|
Linus Torvalds
|
b4c6c76e40 |
Merge tag 'soc-defconfig-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann: "As usual, a number of newly added drivers get enabled in the arm64 defconfig, in addition to minor housekeeping work on defconfig files for arm32, arm64 and riscv" * tag 'soc-defconfig-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: defconfig: enable Exynos ACPM clocks arm64: defconfig: Remove the redundant SCHED_MC/SCHED_SMT ARM: multi_v7_defconfig: Enable TI PRU Ethernet driver arm64: defconfig: enable i.MX AIPSTZ driver ARM: mxs_defconfig: enable sound drivers for imx28-amarula-rmm arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe arm64: defconfig: enable rockchip camera interface ARM: tegra: Enable EXT4 for Tegra arm64: defconfig: Enable NVIDIA VRS PSEQ RTC arm64: defconfig: Enable SX150x GPIO expander driver riscv: defconfig: enable SPI_FSL_QUADSPI as a module ARM: at91: at91_dt_defconfig: set MMC_SPI to module arm64: defconfig: Build NSS clock controller driver for IPQ5424 arm64: defconfig: Enable SCSI UFS Crypto and Block Inline encryption drivers arm64: defconfig: Add M31 eUSB2 PHY config arm64: defconfig: Enable configs for Fairphone 3, 4, 5 smartphones arm64: defconfig: Enable two Novatek display panels for MTP8750 and Tianma arm64: defconfig: Enable RZ/T2H / RZ/N2H ADC driver ARM: shmobile: defconfig: Refresh for v6.18-rc1 arm64: defconfig: Enable DW HDMI QP CEC support ... |
||
|
Linus Torvalds
|
51d90a15fe |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
|
||
|
Linus Torvalds
|
7203ca412f |
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit
|
||
|
Linus Torvalds
|
500920fa76 |
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
||
|
Linus Torvalds
|
6dfafbd029 |
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
||
|
Linus Torvalds
|
015e7b0b0e |
Merge tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov: - Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to test_progs runner (Alexis Lothoré) - Convert selftests/bpf/test_xsk to test_progs runner (Bastien Curutchet) - Replace bpf memory allocator with kmalloc_nolock() in bpf_local_storage (Amery Hung), and in bpf streams and range tree (Puranjay Mohan) - Introduce support for indirect jumps in BPF verifier and x86 JIT (Anton Protopopov) and arm64 JIT (Puranjay Mohan) - Remove runqslower bpf tool (Hoyeon Lee) - Fix corner cases in the verifier to close several syzbot reports (Eduard Zingerman, KaFai Wan) - Several improvements in deadlock detection in rqspinlock (Kumar Kartikeya Dwivedi) - Implement "jmp" mode for BPF trampoline and corresponding DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong) - Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul Chaignon) - Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel Borkmann) - Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko) - Optimize bpf_map_update_elem() for map-in-map types (Ritesh Oedayrajsingh Varma) - Introduce overwrite mode for BPF ring buffer (Xu Kuohai) * tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits) bpf: optimize bpf_map_update_elem() for map-in-map types bpf: make kprobe_multi_link_prog_run always_inline selftests/bpf: do not hardcode target rate in test_tc_edt BPF program selftests/bpf: remove test_tc_edt.sh selftests/bpf: integrate test_tc_edt into test_progs selftests/bpf: rename test_tc_edt.bpf.c section to expose program type selftests/bpf: Add success stats to rqspinlock stress test rqspinlock: Precede non-head waiter queueing with AA check rqspinlock: Disable spinning for trylock fallback rqspinlock: Use trylock fallback when per-CPU rqnode is busy rqspinlock: Perform AA checks immediately rqspinlock: Enclose lock/unlock within lock entry acquisitions bpf: Remove runqslower tool selftests/bpf: Remove usage of lsm/file_alloc_security in selftest bpf: Disable file_alloc_security hook bpf: check for insn arrays in check_ptr_alignment bpf: force BPF_F_RDONLY_PROG on insn array creation bpf: Fix exclusive map memory leak selftests/bpf: Make CS length configurable for rqspinlock stress test selftests/bpf: Add lock wait time stats to rqspinlock stress test ... |
||
|
Linus Torvalds
|
a619fe35ab |
Merge tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Rewrite memcpy_sglist from scratch - Add on-stack AEAD request allocation - Fix partial block processing in ahash Algorithms: - Remove ansi_cprng - Remove tcrypt tests for poly1305 - Fix EINPROGRESS processing in authenc - Fix double-free in zstd Drivers: - Use drbg ctr helper when reseeding xilinx-trng - Add support for PCI device 0x115A to ccp - Add support of paes in caam - Add support for aes-xts in dthev2 Others: - Use likely in rhashtable lookup - Fix lockdep false-positive in padata by removing a helper" * tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits) crypto: zstd - fix double-free in per-CPU stream cleanup crypto: ahash - Zero positive err value in ahash_update_finish crypto: ahash - Fix crypto_ahash_import with partial block data crypto: lib/mpi - use min() instead of min_t() crypto: ccp - use min() instead of min_t() hwrng: core - use min3() instead of nested min_t() crypto: aesni - ctr_crypt() use min() instead of min_t() crypto: drbg - Delete unused ctx from struct sdesc crypto: testmgr - Add missing DES weak and semi-weak key tests Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist" crypto: scatterwalk - Fix memcpy_sglist() to always succeed crypto: iaa - Request to add Kanchana P Sridhar to Maintainers. crypto: tcrypt - Remove unused poly1305 support crypto: ansi_cprng - Remove unused ansi_cprng algorithm crypto: asymmetric_keys - fix uninitialized pointers with free attribute KEYS: Avoid -Wflex-array-member-not-at-end warning crypto: ccree - Correctly handle return of sg_nents_for_len crypto: starfive - Correctly handle return of sg_nents_for_len crypto: iaa - Fix incorrect return value in save_iaa_wq() crypto: zstd - Remove unnecessary size_t cast ... |