master
6709 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Rafael J. Wysocki
|
359afc8eb0 |
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
Commit |
||
|
Linus Torvalds
|
9f20d9bad5 |
Merge tag 'pm-6.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki: "Fix a runtime PM unit test added during the 6.18 development cycle and change the pm_runtime_barrier() return type to void (Brian Norris)" * tag 'pm-6.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: coccinelle: Drop pm_runtime_barrier() error code checks PM: runtime: Make pm_runtime_barrier() return void PM: runtime: Stop checking pm_runtime_barrier() return code |
||
|
Linus Torvalds
|
c2f2b01b74 |
Merge tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni: "HDR support has finally been added. mipi-i3c-hci has been reworked and Intel Nova Lake-S support has been added. Subsystem: - Add HDR transfer support Drivers: - dw: fix bus hang on Agilex5 - mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support - svc: HDR support" * tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits) regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer i3c: document i3c_xfers i3c: fix I3C_SDR bit number i3c: master: svc: Add basic HDR mode support i3c: master: svc: Replace bool rnw with union for HDR support i3c: Switch to use new i3c_xfer from i3c_priv_xfer i3c: Add HDR API support i3c: master: add WQ_PERCPU to alloc_workqueue users i3c: master: Remove i3c_device_free_ibi from i3c_device_remove i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers i3c: mipi-i3c-hci-pci: Add exit callback i3c: mipi-i3c-hci-pci: Change callback parameter i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information i3c: mipi-i3c-hci-pci: Factor out intel_reset() i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping i3c: mipi-i3c-hci-pci: Constify driver data i3c: mipi-i3c-hci-pci: Use readl_poll_timeout() ... |
||
|
Linus Torvalds
|
83bd89291f |
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
||
|
Linus Torvalds
|
249872f53d |
Merge tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe Link Encryption and Device Authentication from Dan Williams:
"New PCI infrastructure and one architecture implementation for PCIe
link encryption establishment via platform firmware services.
This work is the result of multiple vendors coming to consensus on
some core infrastructure (thanks Alexey, Yilun, and Aneesh!), and
three vendor implementations, although only one is included in this
pull. The PCI core changes have an ack from Bjorn, the crypto/ccp/
changes have an ack from Tom, and the iommu/amd/ changes have an ack
from Joerg.
PCIe link encryption is made possible by the soup of acronyms
mentioned in the shortlog below. Link Integrity and Data Encryption
(IDE) is a protocol for installing keys in the transmitter and
receiver at each end of a link. That protocol is transported over Data
Object Exchange (DOE) mailboxes using PCI configuration requests.
The aspect that makes this a "platform firmware service" is that the
key provisioning and protocol is coordinated through a Trusted
Execution Envrionment (TEE) Security Manager (TSM). That is either
firmware running in a coprocessor (AMD SEV-TIO), or quasi-hypervisor
software (Intel TDX Connect / ARM CCA) running in a protected CPU
mode.
Now, the only reason to ask a TSM to run this protocol and install the
keys rather than have a Linux driver do the same is so that later, a
confidential VM can ask the TSM directly "can you certify this
device?".
That precludes host Linux from provisioning its own keys, because host
Linux is outside the trust domain for the VM. It also turns out that
all architectures, save for one, do not publish a mechanism for an OS
to establish keys in the root port. So "TSM-established link
encryption" is the only cross-architecture path for this capability
for the foreseeable future.
This unblocks the other arch implementations to follow in v6.20/v7.0,
once they clear some other dependencies, and it unblocks the next
phase of work to implement the end-to-end flow of confidential device
assignment. The PCIe specification calls this end-to-end flow Trusted
Execution Environment (TEE) Device Interface Security Protocol
(TDISP).
In the meantime, Linux gets a link encryption facility which has
practical benefits along the same lines as memory encryption. It
authenticates devices via certificates and may protect against
interposer attacks trying to capture clear-text PCIe traffic.
Summary:
- Introduce the PCI/TSM core for the coordination of device
authentication, link encryption and establishment (IDE), and later
management of the device security operational states (TDISP).
Notify the new TSM core layer of PCI device arrival and departure
- Add a low level TSM driver for the link encryption establishment
capabilities of the AMD SEV-TIO architecture
- Add a library of helpers TSM drivers to use for IDE establishment
and the DOE transport
- Add skeleton support for 'bind' and 'guest_request' operations in
support of TDISP"
* tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm: (23 commits)
crypto/ccp: Fix CONFIG_PCI=n build
virt: Fix Kconfig warning when selecting TSM without VIRT_DRIVERS
crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)
iommu/amd: Report SEV-TIO support
psp-sev: Assign numbers to all status codes and add new
ccp: Make snp_reclaim_pages and __sev_do_cmd_locked public
PCI/TSM: Add 'dsm' and 'bound' attributes for dependent functions
PCI/TSM: Add pci_tsm_guest_req() for managing TDIs
PCI/TSM: Add pci_tsm_bind() helper for instantiating TDIs
PCI/IDE: Initialize an ID for all IDE streams
PCI/IDE: Add Address Association Register setup for downstream MMIO
resource: Introduce resource_assigned() for discerning active resources
PCI/TSM: Drop stub for pci_tsm_doe_transfer()
drivers/virt: Drop VIRT_DRIVERS build dependency
PCI/TSM: Report active IDE streams
PCI/IDE: Report available IDE streams
PCI/IDE: Add IDE establishment helpers
PCI: Establish document for PCI host bridge sysfs attributes
PCI: Add PCIe Device 3 Extended Capability enumeration
PCI/TSM: Establish Secure Sessions and Link Encryption
...
|
||
|
Linus Torvalds
|
416f99c3b1 |
Merge tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
|
||
|
Linus Torvalds
|
208eed95fc |
Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
||
|
Linus Torvalds
|
7cd122b552 |
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
||
|
Linus Torvalds
|
7203ca412f |
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit
|
||
|
Linus Torvalds
|
52206f82d9 |
Merge tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Allow power-off for out-of-band wakeup-capable devices - Drop the redundant call to dev_pm_domain_detach() for the amba bus - Extend the genpd governor for CPUs to account for IPIs pmdomain providers: - bcm: Add support for BCM2712 - mediatek: Add support for MFlexGraphics power domains - mediatek: Add support for MT8196 power domains - qcom: Add RPMh power domain support for Kaanapali - rockchip: Add support for RV1126B pmdomain consumers: - usb: dwc3: Enable out of band wakeup for i.MX95 - usb: chipidea: Enable out of band wakeup for i.MX95" * tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits) pmdomain: Extend the genpd governor for CPUs to account for IPIs smp: Introduce a helper function to check for pending IPIs pmdomain: mediatek: convert from clk round_rate() to determine_rate() amba: bus: Drop dev_pm_domain_detach() call pmdomain: bcm: bcm2835-power: Prepare to support BCM2712 pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig pmdomain: mediatek: Add support for MFlexGraphics pmdomain: mediatek: Fix build-errors cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu pmdomain: rockchip: Add support for RV1126B pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains pmdomain: mediatek: Add support for MT8196 SCPSYS power domains pmdomain: mediatek: Add support for secure HWCCF infra power on pmdomain: mediatek: Add support for Hardware Voter power domains pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali usb: dwc3: imx8mp: Set out of band wakeup for i.MX95 usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95 usb: chipidea: core: detach power domain for ci_hdrc platform device pmdomain: core: Allow power-off for out-of-band wakeup-capable devices PM: wakeup: Add out-of-band system wakeup support for devices ... |
||
|
Linus Torvalds
|
500920fa76 |
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
||
|
Brian Norris
|
41f7351fc4 |
PM: runtime: Make pm_runtime_barrier() return void
No callers check the return code, and that's a good thing. Doing so would be racy and unhelpful. Drop the return code entirely, so we don't make anyone think about its complexities. Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://patch.msgid.link/20251202193129.1411419-2-briannorris@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Brian Norris
|
3df2470adc |
PM: runtime: Stop checking pm_runtime_barrier() return code
Apparently this test is the only code that checks the return code from pm_runtime_barrier(), and it turns out that's for good reason -- it's inherently racy, and a bad idea. We're going to make pm_runtime_barrier() return void, so prepare for that by dropping any return code checks. This resolves some test failures seen like the following: [ 34.559694] # pm_runtime_error_test: EXPECTATION FAILED at drivers/base/power/runtime-test.c:177 [ 34.559694] Expected 1 == pm_runtime_barrier(dev), but [ 34.559694] pm_runtime_barrier(dev) == 0 (0x0) [ 34.563604] # pm_runtime_error_test: pass:0 fail:1 skip:0 total:1 Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/lkml/93259f2b-7017-4096-a31b-cabbf6152e9b@roeck-us.net/ Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://patch.msgid.link/20251202193129.1411419-1-briannorris@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
ba1401f9cc |
Merge tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing
users that really need the performance properties it provides to
benefit from the interface and startup time improvements that
sparsness provides without needing to go all the way to a more
fancy data structure
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on"
* tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
regmap: i3c: Use ARRAY_SIZE()
regcache: maple: Split ->populate() from ->init()
regcache: flat: Split ->populate() from ->init()
regcache: flat: Remove unneeded check and error message for -ENOMEM
regcache: rbtree: Split ->populate() from ->init()
regcache: Add ->populate() callback to separate from ->init()
regmap: warn users about uninitialized flat cache
regmap: add flat cache with sparse validity
|
||
|
Linus Torvalds
|
2aa680df68 |
Merge tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
||
|
Linus Torvalds
|
d348c22394 |
Merge tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
||
|
Linus Torvalds
|
2547f79b0b |
Merge tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens: - Provide a new interface for dynamic configuration and deconfiguration of hotplug memory, allowing with and without memmap_on_memory support. This makes the way memory hotplug is handled on s390 much more similar to other architectures - Remove compat support. There shouldn't be any compat user space around anymore, therefore get rid of a lot of code which also doesn't need to be tested anymore - Add stackprotector support. GCC 16 will get new compiler options, which allow to generate code required for kernel stackprotector support - Merge pai_crypto and pai_ext PMU drivers into a new driver. This removes a lot of duplicated code. The new driver is also extendable and allows to support new PMUs - Add driver override support for AP queues - Rework and extend zcrypt and AP trace events to allow for tracing of crypto requests - Support block sizes larger than 65535 bytes for CCW tape devices - Since the rework of the virtual kernel address space the module area and the kernel image are within the same 4GB area. This eliminates the need of weak per cpu variables. Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU - Various other small improvements and fixes * tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits) watchdog: diag288_wdt: Remove KMSG_COMPONENT macro s390/entry: Use lay instead of aghik s390/vdso: Get rid of -m64 flag handling s390/vdso: Rename vdso64 to vdso s390: Rename head64.S to head.S s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros s390: Add stackprotector support s390/modules: Simplify module_finalize() slightly s390: Remove KMSG_COMPONENT macro s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU s390/ap: Restrict driver_override versus apmask and aqmask use s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex s390/ap: Support driver_override for AP queue devices s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks s390/debug: Update description of resize operation s390/syscalls: Switch to generic system call table generation s390/syscalls: Remove system call table pointer from thread_struct s390/uapi: Remove 31 bit support from uapi header files s390: Remove compat support tools: Remove s390 compat support ... |
||
|
Linus Torvalds
|
6863c8385c |
Merge tag 'irq-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core and treewide cleanups:
- Rework of the Per Processor Interrupt (PPI) management on ARM[64]
PPI support was built under the assumption that the systems are
homogenous so that the same CPU local device types are connected to
them. That's unfortunately wishful thinking and created horrible
workarounds.
This rework provides affinity management for PPIs so that they can
be individually configured in the firmware tables and mops up the
related drivers all over the place.
- Prevent CPUSET/isolation changes to arbitrarily affine interrupt
threads to random CPUs, which ignores user or driver settings.
- Plug a harmless race in the interrupt affinity proc interface,
which allows to see a half updated mask
- Adjust the priority of secondary interrupt threads on RT, so that
the combination of primary and secondary thread emulates the
hardware interrupt plus thread scenario. Having them at the same
priority can cause starvation issues in some drivers"
* tag 'irq-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
genirq: Remove cpumask availability check on kthread affinity setting
genirq: Fix interrupt threads affinity vs. cpuset isolated partitions
genirq: Prevent early spurious wake-ups of interrupt threads
genirq: Use raw_spinlock_irq() in irq_set_affinity_notifier()
genirq/manage: Reduce priority of forced secondary interrupt handler
genirq/proc: Fix race in show_irq_affinity()
genirq: Fix percpu_devid irq affinity documentation
perf: arm_pmu: Kill last use of per-CPU cpu_armpmu pointer
irqdomain: Kill of_node_to_fwnode() helper
genirq: Kill irq_{g,s}et_percpu_devid_partition()
irqchip: Kill irq-partition-percpu
irqchip/apple-aic: Drop support for custom PMU irq partitions
irqchip/gic-v3: Drop support for custom PPI partitions
coresight: trbe: Request specific affinities for per CPU interrupts
perf: arm_spe_pmu: Request specific affinities for per CPU interrupts
perf: arm_pmu: Request specific affinities for per CPU NMIs/interrupts
genirq: Add request_percpu_irq_affinity() helper
genirq: Allow per-cpu interrupt sharing for non-overlapping affinities
genirq: Update request_percpu_nmi() to take an affinity
genirq: Add affinity to percpu_devid interrupt requests
...
|
||
|
Frank Li
|
79c3ae7ada |
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
Switch to use i3c_xfer instead of i3c_priv_xfer because framework will update to support HDR mode. i3c_priv_xfer is now an alias of i3c_xfer. Replace i3c_device_do_priv_xfers() with i3c_device_do_xfers(..., I3C_SDR) to align with the new API. Prepare for removal of i3c_priv_xfer and i3c_device_do_priv_xfers(). Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20251028-lm75-v1-3-9bf88989c49c@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Linus Torvalds
|
db74a7d02a |
Merge tag 'vfs-6.19-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory delegations update from Christian Brauner:
"This contains the work for recall-only directory delegations for
knfsd.
Add support for simple, recallable-only directory delegations. This
was decided at the fall NFS Bakeathon where the NFS client and server
maintainers discussed how to merge directory delegation support.
The approach starts with recallable-only delegations for several reasons:
1. RFC8881 has gaps that are being addressed in RFC8881bis. In
particular, it requires directory position information for
CB_NOTIFY callbacks, which is difficult to implement properly
under Linux. The spec is being extended to allow that information
to be omitted.
2. Client-side support for CB_NOTIFY still lags. The client side
involves heuristics about when to request a delegation.
3. Early indication shows simple, recallable-only delegations can
help performance. Anna Schumaker mentioned seeing a multi-minute
speedup in xfstests runs with them enabled.
With these changes, userspace can also request a read lease on a
directory that will be recalled on conflicting accesses. This may be
useful for applications like Samba. Users can disable leases
altogether via the fs.leases-enable sysctl if needed.
VFS changes:
- Dedicated Type for Delegations
Introduce struct delegated_inode to track inodes that may have
delegations that need to be broken. This replaces the previous
approach of passing raw inode pointers through the delegation
breaking code paths, providing better type safety and clearer
semantics for the delegation machinery.
- Break parent directory delegations in open(..., O_CREAT) codepath
- Allow mkdir to wait for delegation break on parent
- Allow rmdir to wait for delegation break on parent
- Add try_break_deleg calls for parents to vfs_link(), vfs_rename(),
and vfs_unlink()
- Make vfs_create(), vfs_mknod(), and vfs_symlink() break delegations
on parent directory
- Clean up argument list for vfs_create()
- Expose delegation support to userland
Filelock changes:
- Make lease_alloc() take a flags argument
- Rework the __break_lease API to use flags
- Add struct delegated_inode
- Push the S_ISREG check down to ->setlease handlers
- Lift the ban on directory leases in generic_setlease
NFSD changes:
- Allow filecache to hold S_IFDIR files
- Allow DELEGRETURN on directories
- Wire up GET_DIR_DELEGATION handling
Fixes:
- Fix kernel-doc warnings in __fcntl_getlease
- Add needed headers for new struct delegation definition"
* tag 'vfs-6.19-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: add needed headers for new struct delegation definition
filelock: __fcntl_getlease: fix kernel-doc warnings
vfs: expose delegation support to userland
nfsd: wire up GET_DIR_DELEGATION handling
nfsd: allow DELEGRETURN on directories
nfsd: allow filecache to hold S_IFDIR files
filelock: lift the ban on directory leases in generic_setlease
vfs: make vfs_symlink break delegations on parent dir
vfs: make vfs_mknod break delegations on parent directory
vfs: make vfs_create break delegations on parent directory
vfs: clean up argument list for vfs_create()
vfs: break parent dir delegations in open(..., O_CREAT) codepath
vfs: allow rmdir to wait for delegation break on parent
vfs: allow mkdir to wait for delegation break on parent
vfs: add try_break_deleg calls for parents to vfs_{link,rename,unlink}
filelock: push the S_ISREG check down to ->setlease handlers
filelock: add struct delegated_inode
filelock: rework the __break_lease API to use flags
filelock: make lease_alloc() take a flags argument
|
||
|
Linus Torvalds
|
1d18101a64 |
Merge tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull cred guard updates from Christian Brauner:
"This contains substantial credential infrastructure improvements
adding guard-based credential management that simplifies code and
eliminates manual reference counting in many subsystems.
Features:
- Kernel Credential Guards
Add with_kernel_creds() and scoped_with_kernel_creds() guards that
allow using the kernel credentials without allocating and copying
them. This was requested by Linus after seeing repeated
prepare_kernel_creds() calls that duplicate the kernel credentials
only to drop them again later.
The new guards completely avoid the allocation and never expose the
temporary variable to hold the kernel credentials anywhere in
callers.
- Generic Credential Guards
Add scoped_with_creds() guards for the common override_creds() and
revert_creds() pattern. This builds on earlier work that made
override_creds()/revert_creds() completely reference count free.
- Prepare Credential Guards
Add prepare credential guards for the more complex pattern of
preparing a new set of credentials and overriding the current
credentials with them:
- prepare_creds()
- modify new creds
- override_creds()
- revert_creds()
- put_cred()
Cleanups:
- Make init_cred static since it should not be directly accessed
- Add kernel_cred() helper to properly access the kernel credentials
- Fix scoped_class() macro that was introduced two cycles ago
- coredump: split out do_coredump() from vfs_coredump() for cleaner
credential handling
- coredump: move revert_cred() before coredump_cleanup()
- coredump: mark struct mm_struct as const
- coredump: pass struct linux_binfmt as const
- sev-dev: use guard for path"
* tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
trace: use override credential guard
trace: use prepare credential guard
coredump: use override credential guard
coredump: use prepare credential guard
coredump: split out do_coredump() from vfs_coredump()
coredump: mark struct mm_struct as const
coredump: pass struct linux_binfmt as const
coredump: move revert_cred() before coredump_cleanup()
sev-dev: use override credential guards
sev-dev: use prepare credential guard
sev-dev: use guard for path
cred: add prepare credential guard
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
...
|
||
|
Rafael J. Wysocki
|
f086594adb |
Merge branch 'pm-sleep'
Merge updates related to system suspend and hibernation for 6.19-rc1: - Replace snprintf() with scnprintf() in show_trace_dev_match() (Kaushlendra Kumar) - Fix memory allocation error handling in pm_vt_switch_required() (Malaya Kumar Rout) - Introduce CALL_PM_OP() macro and use it to simplify code in generic PM operations (Kaushlendra Kumar) - Add module param to backtrace all CPUs in the device power management watchdog (Sergey Senozhatsky) - Rework message printing in swsusp_save() (Rafael Wysocki) - Make it possible to change the number of hibernation compression threads (Xueqin Luo) - Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo) - Add document on debugging shutdown hangs to PM documentation and correct a mistaken configuration option in it (Mario Limonciello) - Shut down wakeup source timer before removing the wakeup source from the list (Kaushlendra Kumar, Rafael Wysocki) - Introduce new PMSG_POWEROFF event for system shutdown handling with the help of PM device callbacks (Mario Limonciello) - Make pm_test delay interruptible by wakeup events (Riwen Lu) - Clean up kernel-doc comment style usage in the core hibernation code and remove unuseful comments from it (Sunday Adelodun, Rafael Wysocki) - Add support for handling wakeup events and aborting the suspend process while it is syncing file systems (Samuel Wu, Rafael Wysocki) * pm-sleep: (21 commits) PM: hibernate: Extra cleanup of comments in swap handling code PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper() PM: sleep: Add support for wakeup during filesystem sync PM: hibernate: Clean up kernel-doc comment style usage PM: suspend: Make pm_test delay interruptible by wakeup events usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks scsi: Add PM_EVENT_POWEROFF into suspend callbacks PM: Introduce new PMSG_POWEROFF event PM: wakeup: Update after recent wakeup source removal ordering change PM: wakeup: Delete timer before removing wakeup source from list Documentation: power: Correct a mistaken configuration option Documentation: power: Add document on debugging shutdown hangs freezer: Clarify that only cgroup1 freezer uses PM freezer PM: hibernate: add sysfs interface for hibernate_compression_threads PM: hibernate: make compression threads configurable PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads PM: hibernate: Rework message printing in swsusp_save() PM: dpm_watchdog: add module param to backtrace all CPUs PM: sleep: Introduce CALL_PM_OP() macro to simplify code PM: console: Fix memory allocation error handling in pm_vt_switch_required() ... |
||
|
Rafael J. Wysocki
|
60d69a7ed1 |
Merge branches 'pm-core' and 'pm-runtime'
Merge a core power management update and runtime PM framework updates for 6.19-rc1: - Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari) - Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use them in the PCI core and the ACPI TAD driver (Rafael Wysocki) - Improve runtime PM in the ACPI TAD driver (Rafael Wysocki) - Update pm_runtime_allow/forbid() documentation (Rafael Wysocki) - Fix typos in runtime.c comments (Malaya Kumar Rout) * pm-core: PM: WQ_UNBOUND added to pm_wq workqueue * pm-runtime: PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR() ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR() PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR() PM: runtime: fix typos in runtime.c comments ACPI: TAD: Improve runtime PM using guard macros ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove() PM: runtime: docs: Update pm_runtime_allow/forbid() documentation |
||
|
Mark Brown
|
5d0cad4090 |
ASoC: stm32: sai: fix device and OF node leaks on
Merge series from Johan Hovold <johan@kernel.org>: This series fixes device and OF node reference leaks during probe and a clock prepare imbalance on probe failures. Included is a related cleanup of an error path. |
||
|
Vincent Liu
|
ea34511aaf |
driver core: Check drivers_autoprobe for all added devices
When a device is hot-plugged, the drivers_autoprobe sysfs attribute is not checked (at least for PCI devices). This means that drivers_autoprobe is not working as intended, e.g. hot-plugged PCI devices will still be autoprobed and bound to drivers even with drivers_autoprobe disabled. The problem likely started when device_add() was removed from pci_bus_add_device() in commit |
||
|
Marco Crivellari
|
ac1ab906d7 |
driver core: WQ_PERCPU added to alloc_workqueue users
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit |
||
|
Marco Crivellari
|
e40ad215ce |
driver core: replace use of system_unbound_wq with system_dfl_wq
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit |
||
|
Aaron Tomlin
|
cd22926af4 |
tick/nohz: Expose housekeeping CPUs in sysfs
Expose the current system-defined list of housekeeping CPUs in a new sysfs file: /sys/devices/system/cpu/housekeeping. This provides userspace performance tuning tools and resource managers with a canonical, reliable method to accurately identify the cores responsible for essential kernel maintenance workloads (RCU, timer callbacks, and unbound workqueues). Currently, tooling must manually calculate the housekeeping set by parsing complex kernel boot parameters (like isolcpus= and nohz_full=) and system topology, which is prone to error. This dedicated file simplifies the configuration of low-latency workloads. Signed-off-by: Aaron Tomlin <atomlin@atomlin.com> Link: https://patch.msgid.link/20251011012853.7539-2-atomlin@atomlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Aaron Tomlin
|
f10c23fa15 |
tick/nohz: avoid showing '(null)' if nohz_full= not set
In the context of CONFIG_NO_HZ_FULL=y, tick_nohz_full_mask (of type
cpumask_var_t) is initialised to 0. Memory is only allocated to the cpumask
data structure, in tick_nohz_full_setup(), when Linux kernel boot-time
parameter "nohz_full=" is correctly specified (see housekeeping_setup()).
If "nohz_full=" is not set and an attempt is made to read
/sys/devices/system/cpu/nohz_full, '(null)' can be displayed:
❯ cat /sys/devices/system/cpu/nohz_full
(null)
This patch changes the output to print a newline (or 0x0A) instead of
'(null)', making it consistent with print_cpus_isolated() behaviour.
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Link: https://patch.msgid.link/20251011011830.6670-3-atomlin@atomlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Aaron Tomlin
|
76987bac71 |
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
The /sys/devices/system/cpu/nohz_full file is a read-only attribute that reports the CPUs configured for tickless operation (CONFIG_NO_HZ_FULL=y). The current definition uses the generic DEVICE_ATTR macro, which unnecessarily requires specifying the file mode (0444) and a NULL store operation pointer. This patch converts the definition to use the dedicated DEVICE_ATTR_RO macro. This correctly expresses the read-only nature of the attribute, removes the redundant mode field, and simplifies the code. As a related cleanup, rename the show function from print_cpus_nohz_full() to the standard nohz_full_show() for consistency with common sysfs attribute naming conventions. Signed-off-by: Aaron Tomlin <atomlin@atomlin.com> Link: https://patch.msgid.link/20251011011830.6670-2-atomlin@atomlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Alexandre Courbot
|
9906efa545 |
firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER
The use of firmware_loader is an implementation detail of drivers rather
than a dependency. FW_LOADER is typically selected rather than depended
on; the Rust abstractions should do the same thing.
Fixes:
|
||
|
Rafael J. Wysocki
|
a857b530b3 | Merge back material related to system sleep for 6.19 | ||
|
Bartosz Golaszewski
|
d7cdbbc93c |
software node: allow referencing firmware nodes
At the moment software nodes can only reference other software nodes. This is a limitation for devices created, for instance, on the auxiliary bus with a dynamic software node attached which cannot reference devices the firmware node of which is "real" (as an OF node or otherwise). Make it possible for a software node to reference all firmware nodes in addition to static software nodes. To that end: add a second pointer to struct software_node_ref_args of type struct fwnode_handle. The core swnode code will first check the swnode pointer and if it's NULL, it will assume the fwnode pointer should be set. Software node graphs remain the same, as in: the remote endpoints still have to be software nodes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Bartosz Golaszewski
|
0651933c11 |
software node: increase the reference of the swnode by its fwnode
Once we allow software nodes to reference other kinds of firmware nodes, the node in args will no longer necessarily be a software node so bump its reference count using its fwnode interface. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Bartosz Golaszewski
|
f11a8e996d |
software node: read the reference args via the fwnode API
Once we allow software nodes to reference all kinds of firmware nodes, the refnode here will no longer necessarily be a software node so read its proprties going through its fwnode implementation. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Peng Fan
|
4acbfb6c11 |
PM: wakeup: Add out-of-band system wakeup support for devices
Some devices can wake up the system from suspend even when their power domains are turned off. This is possible because their system-wakeup logic resides in an always-on power domain - indicating that they support out-of-band system wakeup. Currently, PM domain core doesn't power off such devices if they are marked as system wakeup sources. To better represent devices with out-of-band wakeup capability, this patch introduces a new flag out_band_wakeup in 'struct dev_pm_info'. Two helper APIs are added: - device_set_out_band_wakeup() - to mark a device as having out-of-band wakeup capability. - device_out_band_wakeup() - to query the flag. Allow the PM core and drivers to distinguish between regular and out-of-band wakeup sources, enable more accurate power management decision. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Andy Shevchenko
|
4d24145a78 |
devres: Remove unused devm_free_percpu()
Remove unused devm_free_percpu(). By the way, it was never used in the drivers/ from day 1. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251111145046.997309-2-andriy.shevchenko@linux.intel.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Rafael J. Wysocki
|
f384497a76 |
PM: sleep: core: Fix runtime PM enabling in device_resume_early()
Runtime PM should only be enabled in device_resume_early() if it has
been disabled for the given device by device_suspend_late(). Otherwise,
it may cause runtime PM callbacks to run prematurely in some cases
which leads to further functional issues.
Make two changes to address this problem.
First, reorder device_suspend_late() to only disable runtime PM for a
device when it is going to look for the device's callback or if the
device is a "syscore" one. In all of the other cases, disabling runtime
PM for the device is not in fact necessary. However, if the device's
callback returns an error and the power.is_late_suspended flag is not
going to be set, enable runtime PM so it only remains disabled when
power.is_late_suspended is set.
Second, make device_resume_early() only enable runtime PM for the
devices with the power.is_late_suspended flag set.
Fixes:
|
||
|
Rafael J. Wysocki
|
37d6d92fe0 | Merge back earlier material related to system sleep for 6.19 | ||
|
Israel Batista
|
ed1f8855dd |
mm: change type of parameter for memory_notify
memory_notify() is responsible for sending events related to memory hotplugging to a notification queue. Since all the events must match one of the values from the enum memory_block_state, it is appropriate to change the function parameter type to make this condition explicit at compile time. Link: https://lkml.kernel.org/r/20251029195617.2210700-4-linux@israelbatista.dev.br Signed-off-by: Israel Batista <linux@israelbatista.dev.br> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Omar Sandoval <osandov@osandov.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Israel Batista
|
8bc7ba3d26 |
mm: change type of state in struct memory_block
The state of a memory block should be restricted to values specified in the documentation of the memory hotplug API. However, since the state field in the memory_block struct was defined as an unsigned long, this restriction was not enforced at compile time. With the introduction of the enum memory_block_state, it is now possible to incorporate the desired semantics in the field declaration and enforce these restrictions at compile time. [akpm@linux-foundation.org: fix whitespace, per Randy] Link: https://lkml.kernel.org/r/20251029195617.2210700-3-linux@israelbatista.dev.br Signed-off-by: Israel Batista <linux@israelbatista.dev.br> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Omar Sandoval <osandov@osandov.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Donet Tom
|
d945667dcb |
drivers/base/node: fold unregister_node() into unregister_one_node()
unregister_node() is only called from unregister_one_node(). This patch folds unregister_node() into its only caller and renames unregister_one_node() to unregister_node(). This reduces unnecessary indirection and simplifies the code structure. No functional changes are introduced. [donettom@linux.ibm.com: remove extra spaces before @nid and "All"] Link: https://lkml.kernel.org/r/cff01514-9074-4c97-bcf1-d4e3594e48b0@linux.ibm.com Link: https://lkml.kernel.org/r/32b7d5d8f0f30d313c3e1d8798f591459c8746f9.1760097208.git.donettom@linux.ibm.com Signed-off-by: Donet Tom <donettom@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Cc: Aboorva Devarajan <aboorvad@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Donet Tom
|
eb8762dc22 |
drivers/base/node: fold register_node() into register_one_node()
Patch series "drivers/base/node: fold node register and unregister functions", v2. The first patch merges register_one_node() and register_node(), leaving a single register_node() function. The second patch merges unregister_one_node() and unregister_node(), leaving a single unregister_node() function. There are no functional changes in these patches. This patch (of 2): register_node() is only called from register_one_node(). This patch folds register_node() into its only caller and renames register_one_node() to register_node(). This reduces unnecessary indirection and simplifies the code structure. No functional changes are introduced. [akpm@linux-foundation.org: fix kerneldoc, per David] Link: https://lkml.kernel.org/r/cover.1760097207.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/910853c9dd61f7a2190a56cba101e73e9c6859be.1760097207.git.donettom@linux.ibm.com Signed-off-by: Donet Tom <donettom@linux.ibm.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Aboorva Devarajan <aboorvad@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Al Viro
|
2313598222 |
convert ramfs and tmpfs
Quite a bit is already done by infrastructure changes (simple_link(),
simple_unlink()) - all that is left is replacing d_instantiate() +
pinning dget() (in ->symlink() and ->mknod()) with d_make_persistent(),
and, in case of shmem, using simple_unlink() and simple_link() in
->unlink() and ->link() resp., instead of open-coding those there.
Since d_make_persistent() accepts (and hashes) unhashed ones, shmem
situation gets simpler - we no longer care whether ->lookup() has hashed
the sucker.
With that done, we don't need kill_litter_super() for these filesystems
anymore - by the umount time all remaining dentries will be marked
persistent and kill_litter_super() will boil down to call of
kill_anon_super().
The same goes for devtmpfs and rootfs - they are handled by
ramfs or by shmem, depending upon config.
NB: strictly speaking, both devtmpfs and rootfs ought to use
ramfs_kill_sb() if they end up using ramfs; that's a separate
story and the only impact of "just use kill_{litter,anon}_super()"
is that we fail to free their sb->s_fs_info... on reboot.
That's orthogonal to the changes in this series - kill_litter_super()
is identical to kill_anon_super() for those at this point.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
||
|
Mario Limonciello (AMD)
|
0ca04993da |
PM: Introduce new PMSG_POWEROFF event
PMSG_POWEROFF will be used for the PM core to allow differentiating between a hibernation or shutdown sequence when re-using callbacks for common code. Hibernation is started by writing a hibernation method (such as 'platform' 'shutdown', or 'reboot') to use into /sys/power/disk and writing 'disk' to /sys/power/state. Shutdown is initiated with the reboot() syscall with arguments on whether to halt the system or power it off. Tested-by: Eric Naim <dnaim@cachyos.org> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20251112224025.2051702-2-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
bdfacf441b | Merge back earlier runtime PM changes for 6.19 | ||
|
Thierry Reding
|
a97fbc3ee3 |
syscore: Pass context data to callbacks
Several drivers can benefit from registering per-instance data along with the syscore operations. To achieve this, move the modifiable fields out of the syscore_ops structure and into a separate struct syscore that can be registered with the framework. Add a void * driver data field for drivers to store contextual data that will be passed to the syscore ops. Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Rafael J. Wysocki
|
9cf02802d6 |
PM: wakeup: Update after recent wakeup source removal ordering change
After a recent change, wakeup_source_activate() will warn that the given wakeup source is "unregistered" after its timer has been shut down in wakeup_source_remove() which may be somewhat confusing, so change the warning message to say that the wakeup source is "unusable". Accordingly, rename wakeup_source_not_registered() to wakeup_source_not_usable() and update the comment in it to also mention the removal of the wakeup source. Also restore the comment in wakeup_source_remove() regarding the warning in wakeup_source_activate() that may trigger after shutting down the wakeup source timer. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/12788103.O9o76ZdvQC@rafael.j.wysocki |
||
|
Jeff Layton
|
e8960c1b2e |
vfs: make vfs_mknod break delegations on parent directory
In order to add directory delegation support, we need to break delegations on the parent whenever there is going to be a change in the directory. Add a new delegated_inode pointer to vfs_mknod() and have the appropriate callers wait when there is an outstanding delegation. All other callers just set the pointer to NULL. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-11-52f3feebb2f2@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Jeff Layton
|
4fa76319cd |
vfs: allow rmdir to wait for delegation break on parent
In order to add directory delegation support, we need to break delegations on the parent whenever there is going to be a change in the directory. Add a delegated_inode struct to vfs_rmdir() and populate that pointer with the parent inode if it's non-NULL. Most existing in-kernel callers pass in a NULL pointer. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-7-52f3feebb2f2@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |