loop_set_status() is allowed to change the loop device while there
are other openers of the device, even exclusive ones.
In this case, it causes a KASAN: slab-out-of-bounds Read in
ext4_search_dir(), since when looking for an entry in an inlined
directory, e_value_offs is changed underneath the filesystem by
loop_set_status().
Fix the problem by forbidding loop_set_status() from modifying the loop
device while there are exclusive openers of the device. This is similar
to the fix in loop_configure() by commit 33ec3e53e7 ("loop: Don't
change loop device under exclusive opener") alongside commit ecbe6bc000
("block: use bd_prepare_to_claim directly in the loop driver").
Reported-by: syzbot+3ee481e21fd75e14c397@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ee481e21fd75e14c397
Tested-by: syzbot+3ee481e21fd75e14c397@syzkaller.appspotmail.com
Tested-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When lo->lo_mutex is not held, direct access may read stale data. This
patch uses READ_ONCE() to read lo->lo_state and data_race() to silence
code checkers, and changes all assignments to use WRITE_ONCE().
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new helper function blk_rq_nr_bvec() that returns the number of
bvecs in a request. This count represents the number of iterations
rq_for_each_bvec() would perform on a request.
Drivers need to pre-allocate bvec arrays before iterating through
a request's bvecs. Currently, they manually count bvecs using
rq_for_each_bvec() in a loop, which is repetitive. The new helper
centralizes this logic.
This pattern exists in loop and zloop drivers, where multi-bio requests
require copying bvecs into a contiguous array before creating
an iov_iter for file operations.
Update loop and zloop drivers to use the new helper, eliminating
duplicate code.
This patch also provides a clear API to avoid any potential misuse of
blk_nr_phys_segments() for calculating the bvecs since, one bvec can
have more than one segments and use of blk_nr_phys_segments() can
lead to extra memory allocation :-
[ 6155.673749] nullb_bio: 128K bio as ONE bvec: sector=0, size=131072
[ 6155.673846] null_blk: #### null_handle_data_transfer:1375
[ 6155.673850] null_blk: nr_bvec=1 blk_rq_nr_phys_segments=2
[ 6155.674263] null_blk: #### null_handle_data_transfer:1375
[ 6155.674267] null_blk: nr_bvec=1 blk_rq_nr_phys_segments=1
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop driver advertises REQ_NOWAIT support through BLK_FEAT_NOWAIT
(enabled by default for all blk-mq devices), and honors the nowait
behavior throughout loop_queue_rq().
However, actual I/O to the backing file is performed in a workqueue,
where blocking is allowed.
To avoid imposing unnecessary non-blocking constraints in this blocking
context, clear the REQ_NOWAIT flag before processing the request in the
workqueue context.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add hint for using IOCB_NOWAIT to handle loop aio command for avoiding
to cause write(especially randwrite) perf regression on sparse backed file.
Try IOCB_NOWAIT in the following situations:
- backing file is block device
OR
- READ aio command
OR
- there isn't any queued blocking async WRITEs, because NOWAIT won't cause
contention with blocking WRITE, which often implies exclusive lock
With this simple policy, perf regression of randwrite/write on sparse
backing file is fixed.
Link: https://lore.kernel.org/dm-devel/7d6ae2c9-df8e-50d0-7ad6-b787cb3cfab4@redhat.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Try to handle loop aio command via NOWAIT IO first, then we can avoid to
queue the aio command into workqueue. This is usually one big win in
case that FS block mapping is stable, Mikulas verified [1] that this way
improves IO perf by close to 5X in 12jobs sequential read/write test,
in which FS block mapping is just stable.
Fallback to workqueue in case of -EAGAIN. This way may bring a little
cost from the 1st retry, but when running the following write test over
loop/sparse_file, the actual effect on randwrite is obvious:
```
truncate -s 4G 1.img #1.img is created on XFS/virtio-scsi
losetup -f 1.img --direct-io=on
fio --direct=1 --bs=4k --runtime=40 --time_based --numjobs=1 --ioengine=libaio \
--iodepth=16 --group_reporting=1 --filename=/dev/loop0 -name=job --rw=$RW
```
- RW=randwrite: obvious IOPS drop observed
- RW=write: a little drop(%5 - 10%)
This perf drop on randwrite over sparse file will be addressed in the
following patch.
BLK_MQ_F_BLOCKING has to be set for calling into .read_iter() or .write_iter()
which might sleep even though it is NOWAIT, and the only effect is that rcu read
lock is replaced with srcu read lock.
Link: https://lore.kernel.org/linux-block/a8e5c76a-231f-07d1-a394-847de930f638@redhat.com/ [1]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move loop command blkcg/memcg initialization into loop_queue_work,
and prepare for supporting to handle loop io command by IOCB_NOWAIT.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor lo_rw_aio() by extracting the I/O submission logic into a new
helper function lo_submit_rw_aio(). This further improves code organization
by separating the I/O preparation, submission, and completion handling into
distinct phases.
Prepare for using NOWAIT to improve loop performance.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add helper lo_rw_aio_prep() to separate the preparation phase(setting up bio
vectors and initializing the iocb structure) from the actual I/O execution
in the loop block driver.
Prepare for using NOWAIT to improve loop performance.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add lo_cmd_nr_bvec() and prepare for refactoring lo_rw_aio().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use vfs_getattr_nosec() in lo_calculate_size() for getting the file
size, rather than just read the cached inode size via i_size_read().
This provides better results than cached inode data, particularly for
network filesystems where metadata may be stale.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-3-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Renamed get_size to lo_calculate_size and merged the logic from get_size
and get_loop_size into a single function. Update all callers to use
lo_calculate_size. This is done in preparation for improving the size
detection logic.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-2-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
The lockdep tool can report a circular lock dependency warning in the loop
driver's AIO read/write path:
```
[ 6540.587728] kworker/u96:5/72779 is trying to acquire lock:
[ 6540.593856] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.603786]
[ 6540.603786] but task is already holding lock:
[ 6540.610291] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.620210]
[ 6540.620210] other info that might help us debug this:
[ 6540.627499] Possible unsafe locking scenario:
[ 6540.627499]
[ 6540.634110] CPU0
[ 6540.636841] ----
[ 6540.639574] lock(sb_writers#9);
[ 6540.643281] lock(sb_writers#9);
[ 6540.646988]
[ 6540.646988] *** DEADLOCK ***
```
This patch fixes the issue by using the AIO-specific helpers
`kiocb_start_write()` and `kiocb_end_write()`. These functions are
designed to be used with a `kiocb` and manage write sequencing
correctly for asynchronous I/O without introducing the problematic
lock dependency.
The `kiocb` is already part of the `loop_cmd` struct, so this change
also simplifies the completion function `lo_rw_aio_do_completion()` by
using the `iocb` from the `cmd` struct directly, instead of retrieving
the loop device from the request queue.
Fixes: 39d86db34e ("loop: add file_start_write() and file_end_write()")
Cc: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250716114808.3159657-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzbot came up with a reproducer where a loop device block size is
changed underneath a mounted filesystem. This causes a mismatch between
the block device block size and the block size stored in the superblock
causing confusion in various places such as fs/buffer.c. The particular
issue triggered by syzbot was a warning in __getblk_slow() due to
requested buffer size not matching block device block size.
Fix the problem by getting exclusive hold of the loop device to change
its block size. This fails if somebody (such as filesystem) has already
an exclusive ownership of the block device and thus prevents modifying
the loop device under some exclusive owner which doesn't expect it.
Reported-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20250711163202.19623-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
file_start_write() and file_end_write() should be added around ->write_iter().
Recently we switch to ->write_iter() from vfs_iter_write(), and the
implied file_start_write() and file_end_write() are lost.
Also we never add them for dio code path, so add them back for covering
both.
Cc: Jeff Moyer <jmoyer@redhat.com>
Fixes: f2fed441c6 ("loop: stop using vfs_iter_{read,write} for buffered I/O")
Fixes: bc07c10a36 ("block: loop: support DIO & AIO")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250527153405.837216-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block devices can be opened read-write even if they can't be written to
for historic reasons. Remove the check requiring file->f_op->write_iter
when the block devices was opened in loop_configure. The call to
loop_check_backing_file just below ensures the ->write_iter is present
for backing files opened for writing, which is the only check that is
actually needed.
Fixes: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Reported-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250520135420.1177312-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vfs_iter_{read,write} always perform direct I/O when the file has the
O_DIRECT flag set, which breaks disabling direct I/O using the
LOOP_SET_STATUS / LOOP_SET_STATUS64 ioctls.
This was recenly reported as a regression, but as far as I can tell
was only uncovered by better checking for block sizes and has been
around since the direct I/O support was added.
Fix this by using the existing aio code that calls the raw read/write
iter methods instead. Note that despite the comments there is no need
for block drivers to ever call flush_dcache_page themselves, and the
call is a left-over from prehistoric times.
Fixes: ab1cb278bc ("block: loop: introduce ioctl command of LOOP_SET_DIRECT_IO")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250409130940.3685677-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original commit message and the wording "uncork" in the code comment
indicate that it is expected that the suppressed event instances are
automatically sent after unsuppressing.
This is not the case, instead they are discarded.
In effect this means that no "changed" events are emitted on the device
itself by default.
While each discovered partition does trigger a changed event on the
device, devices without partitions don't have any event emitted.
This makes udev miss the device creation and prompted workarounds in
userspace. See the linked util-linux/losetup bug.
Explicitly emit the events and drop the confusingly worded comments.
Link: https://github.com/util-linux/util-linux/issues/2434
Fixes: 498ef5c777 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If vfs_flush() is called with queue frozen, the queue freeze lock may be
connected with FS internal lock, and lockdep warning can be triggered
because the queue freeze lock is connected with too many global or
sub-system locks.
Fix the warning by moving vfs_fsync() out of loop_update_dio():
- vfs_fsync() is only needed when switching to dio
- only loop_change_fd() and loop_configure() may switch from buffered
IO to direct IO, so call vfs_fsync() directly here. This way is safe
because either loop is in unbound, or new file isn't attached
- for the other two cases of set_status and set_block_size, direct IO
can only become off, so no need to call vfs_fsync()
Cc: Christoph Hellwig <hch@infradead.org>
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Reported-by: Jiaji Qin <jjtan24@m.fudan.edu.cn>
Closes: https://lore.kernel.org/linux-block/359BC288-B0B1-4815-9F01-3A349B12E816@m.fudan.edu.cn/T/#u
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250318072955.3893805-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop driver currently uses the logical block size of the underlying
bdev as the lower bound of the loop device block size. While this works
for many cases, it fails for file systems made up of multiple devices
with different logical block sizes (e.g. XFS with a RT device that has a
larger logical block size), or when the file systems doesn't support
direct I/O writes at the sector size granularity (e.g. because it does
out of place writes with a file system block size larger than the sector
size).
Fix this by querying the minimum direct I/O alignment from statx when
available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250131120120.1315125-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't go below the minimum direct I/O size no matter if direct I/O is
enabled by passing in an O_DIRECT file descriptor or due to the explicit
flag. Now that LO_FLAGS_DIRECT_IO is set earlier after assigning a
backing file, loop_default_blocksize can check it instead of the
O_DIRECT flag to handle both conditions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250131120120.1315125-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
LOOP_SET_STATUS{,64} can set a lot more flags than it is supposed to
clear (the LOOP_SET_STATUS_CLEARABLE_FLAGS vs
LOOP_SET_STATUS_SETTABLE_FLAGS defines should have been a hint..).
Fix this by only clearing the bits in LOOP_SET_STATUS_CLEARABLE_FLAGS.
Fixes: ae074d07a0 ("loop: move updating lo_flag s out of loop_set_status_from_info")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250127143045.538279-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of loop_update_dio except for loop_configure already have the
queue frozen, and loop_configure works on an unbound device. Remove the
superfluous recursive freezing in loop_update_dio and add asserts for the
locking and freezing state instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike all other calls of (__)loop_update_dio, loop_set_status never
looks at the O_DIRECT flag of the backing file, and thus doesn't
re-enable direct I/O on an O_DIRECT backing file if e.g. the new block
size would allow it. Fix that and remove the need for the separate
__loop_update_dio flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
loop_set_dio is different from the other (__)loop_update_dio callers in
that it doesn't take any implicit conditions into account and wants to
update the direct I/O flag to the user passed in value and fail if that
can't be done.
Open code the logic here to prepare for simplifying the other direct I/O
flag updates and to make the error handling less convoluted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in doing an fdatasync to write out pages when switching
away from direct I/O, as there won't be any. The writeback is only
needed when switching to direct I/O, which would have to invalidate the
pagecache less efficiently from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current loop calls vfs_statfs() while holding the q->limits_lock. If
FS takes some locking in vfs_statfs callback, this may lead to ABBA
locking bug (at least, FAT fs has this issue actually).
So this patch calls vfs_statfs() outside q->limits_locks instead,
because looks like no reason to hold q->limits_locks while getting
discord configs.
Chain exists of:
&sbi->fat_lock --> &q->q_usage_counter(io)#17 --> &q->limits_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->limits_lock);
lock(&q->q_usage_counter(io)#17);
lock(&q->limits_lock);
lock(&sbi->fat_lock);
*** DEADLOCK ***
Reported-by: syzbot+a5d8c609c02f508672cc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5d8c609c02f508672cc
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
