Patch series "kho: fixes for vmalloc restoration".
Pratyush reported off-list that when kho_restore_vmalloc() is used to
restore a vmalloc_huge() allocation it hits VM_BUG_ON() when we
reconstruct the struct pages in kho_restore_pages().
These patches fix the issue.
This patch (of 2):
In case a preserved vmalloc allocation was using huge pages, all pages in
the array of pages added to vm_struct during kho_restore_vmalloc() are
wrongly set to the same page.
Fix the indexing when assigning pages to that array.
Link: https://lkml.kernel.org/r/20251125110917.843744-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20251125110917.843744-2-rppt@kernel.org
Fixes: a667300bd5 ("kho: add support for preserving vmalloc allocations")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When booting with debug_pagealloc=on while having:
CONFIG_KEXEC_HANDOVER_ENABLE_DEFAULT=y
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
the system fails to boot due to page faults during kmemleak scanning.
This occurs because:
With debug_pagealloc is enabled, __free_pages() invokes
debug_pagealloc_unmap_pages(), clearing the _PAGE_PRESENT bit for freed
pages in the kernel page table. KHO scratch areas are allocated from
memblock and noted by kmemleak. But these areas don't remain reserved but
released later to the page allocator using init_cma_reserved_pageblock().
This causes subsequent kmemleak scans access non-PRESENT pages, leading to
fatal page faults.
Mark scratch areas with kmemleak_ignore_phys() after they are allocated
from memblock to exclude them from kmemleak scanning before they are
released to buddy allocator to fix this.
[ran.xiaokai@zte.com.cn: add comment]
Link: https://lkml.kernel.org/r/20251127122700.103927-1-ranxiaokai627@163.com
Link: https://lkml.kernel.org/r/20251122182929.92634-1-ranxiaokai627@163.com
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec: reorganize kexec and kdump sysfs", v6.
All existing kexec and kdump sysfs entries are moved to a new location,
/sys/kernel/kexec, to keep /sys/kernel/ clean and better organized.
Symlinks are created at the old locations for backward compatibility and
can be removed in the future [01/03].
While doing this cleanup, the old kexec and kdump sysfs entries are
marked as deprecated in the existing ABI documentation [02/03]. This
makes it clear that these older interfaces should no longer be used.
New ABI documentation is added to describe the reorganized interfaces
[03/03], so users and tools can rely on the updated sysfs interfaces
going forward.
This patch (of 3):
Several kexec and kdump sysfs entries are currently placed directly under
/sys/kernel/, which clutters the directory and makes it harder to identify
unrelated entries. To improve organization and readability, these entries
are now moved under a dedicated directory, /sys/kernel/kexec.
The following sysfs moved under new kexec sysfs node
+------------------------------------+------------------+
| Old sysfs name | New sysfs name |
| (under /sys/kernel) | (under /sys/kernel/kexec) |
+---------------------------+---------------------------+
| kexec_loaded | loaded |
+---------------------------+---------------------------+
| kexec_crash_loaded | crash_loaded |
+---------------------------+---------------------------+
| kexec_crash_size | crash_size |
+---------------------------+---------------------------+
| crash_elfcorehdr_size | crash_elfcorehdr_size |
+---------------------------+---------------------------+
| kexec_crash_cma_ranges | crash_cma_ranges |
+---------------------------+---------------------------+
For backward compatibility, symlinks are created at the old locations so
that existing tools and scripts continue to work. These symlinks can be
removed in the future once users have switched to the new path.
While creating symlinks, entries are added in /sys/kernel/ that point to
their new locations under /sys/kernel/kexec/. If an error occurs while
adding a symlink, it is logged but does not stop initialization of the
remaining kexec sysfs symlinks.
The /sys/kernel/<crash_elfcorehdr_size | kexec/crash_elfcorehdr_size>
entry is now controlled by CONFIG_CRASH_DUMP instead of
CONFIG_VMCORE_INFO, as CONFIG_CRASH_DUMP also enables CONFIG_VMCORE_INFO.
Link: https://lkml.kernel.org/r/20251118114507.1769455-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20251118114507.1769455-2-sourabhjain@linux.ibm.com
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shivang Upadhyay <shivangu@linux.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, kho_preserve_* and kho_unpreserve_* return -EBUSY if KHO is
finalized. This enforces a rigid "freeze" on the KHO memory state.
With the introduction of re-entrant finalization, this restriction is no
longer necessary. Users should be allowed to modify the preservation set
(e.g., adding new pages or freeing old ones) even after an initial
finalization.
The intended workflow for updates is now:
1. Modify state (preserve/unpreserve).
2. Call kho_finalize() again to refresh the serialized metadata.
Remove the kho_out.finalized checks to enable this dynamic behavior.
This also allows to convert kho_unpreserve_* functions to void, as they do
not return any error anymore.
Link: https://lkml.kernel.org/r/20251114190002.3311679-13-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, kho_fill_kimage() checks kho_out.finalized and returns early if
KHO is not yet finalized. This enforces a strict ordering where userspace
must finalize KHO *before* loading the kexec image.
This is restrictive, as standard workflows often involve loading the
target kernel early in the lifecycle and finalizing the state (FDT) only
immediately before the reboot.
Since the KHO FDT resides at a physical address allocated during boot
(kho_init), its location is stable. We can attach this stable address to
the kimage regardless of whether the content has been finalized yet.
Relax the check to only require kho_enable, allowing kexec_file_load to
proceed at any time.
Link: https://lkml.kernel.org/r/20251114190002.3311679-12-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, sub-FDTs were tracked in a list (kho_out.sub_fdts) and the
final FDT is constructed entirely from scratch during kho_finalize().
We can maintain the FDT dynamically:
1. Initialize a valid, empty FDT in kho_init().
2. Use fdt_add_subnode and fdt_setprop in kho_add_subtree to
update the FDT immediately when a subsystem registers.
3. Use fdt_del_node in kho_remove_subtree to remove entries.
This removes the need for the intermediate sub_fdts list and the
reconstruction logic in kho_finalize(). kho_finalize() now only needs to
trigger memory map serialization.
Link: https://lkml.kernel.org/r/20251114190002.3311679-11-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, KHO required a dedicated kho_abort() function to clean up
state before kho_finalize() could be called again. This was necessary to
handle complex unwind paths when using notifiers.
With the shift to direct memory preservation, the explicit abort step is
no longer strictly necessary.
Remove kho_abort() and refactor kho_finalize() to handle re-entry. If
kho_finalize() is called while KHO is already finalized, it will now
automatically clean up the previous memory map and state before generating
a new one. This allows the KHO state to be updated/refreshed simply by
triggering finalize again.
Update debugfs to return -EINVAL if userspace attempts to write 0 to the
finalize attribute, as explicit abort is no longer supported.
Link: https://lkml.kernel.org/r/20251114190002.3311679-10-pasha.tatashin@soleen.com
Suggested-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the serialized memory map is tracked via
kho_out.preserved_mem_map and copied to the FDT during finalization. This
double tracking is redundant.
Remove preserved_mem_map from kho_out. Instead, maintain the physical
address of the head chunk directly in the preserved-memory-map FDT
property.
Introduce kho_update_memory_map() to manage this property. This function
handles:
1. Retrieving and freeing any existing serialized map (handling the
abort/retry case).
2. Updating the FDT property with the new chunk address.
This establishes the FDT as the single source of truth for the handover
state.
Link: https://lkml.kernel.org/r/20251114190002.3311679-9-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, __kho_finalize() performs memory serialization in the middle of
FDT construction. If FDT construction fails later, the function must
manually clean up the serialized memory via __kho_abort().
Refactor __kho_finalize() to perform kho_mem_serialize() only after the
FDT has been successfully constructed and finished. This reordering has
two benefits:
1. It avoids expensive serialization work if FDT generation fails.
2. It removes the need for cleanup in the FDT error path.
As a result, the internal helper __kho_abort() is no longer needed for
internal error handling. Inline its remaining logic (cleanup of the
preserved memory map) directly into kho_abort() and remove the helper.
Link: https://lkml.kernel.org/r/20251114190002.3311679-8-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During boot, kho_restore_folio() relies on the memory map having been
successfully deserialized. If deserialization fails or no map is present,
attempting to restore the FDT folio is unsafe.
Update kho_mem_deserialize() to return a boolean indicating success. Use
this return value in kho_memory_init() to disable KHO if deserialization
fails. Also, the incoming FDT folio is never used, there is no reason to
restore it.
Additionally, use get_unaligned() to retrieve the memory map pointer from
the FDT. FDT properties are not guaranteed to be naturally aligned, and
accessing a 64-bit value via a pointer that is only 32-bit aligned can
cause faults.
Link: https://lkml.kernel.org/r/20251114190002.3311679-6-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the FDT folio is preserved inside __kho_finalize(). If the
user performs multiple finalize/abort cycles, kho_preserve_folio() is
called repeatedly for the same FDT folio.
Since the FDT folio is allocated once during kho_init(), it should be
marked for preservation at the same time. Move the preservation call to
kho_init() to align the preservation state with the object's lifecycle and
simplify the finalize path.
Also, pre-zero the FDT tree so we do not expose random bits to the user
and to the next kernel by using the new kho_alloc_preserve() api.
Link: https://lkml.kernel.org/r/20251114190002.3311679-5-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kho: simplify state machine and enable dynamic updates", v2.
This patch series refactors the Kexec Handover subsystem to transition
from a rigid, state-locked model to a dynamic, re-entrant architecture.
It also introduces usability improvements.
Motivation
Currently, KHO relies on a strict state machine where memory
preservation is locked upon finalization. If a change is required, the
user must explicitly "abort" to reset the state. Additionally, the kexec
image cannot be loaded until KHO is finalized, and the FDT is rebuilt
from scratch on every finalization.
This series simplifies this workflow to support "load early, finalize
late" scenarios.
Key Changes
State Machine Simplification:
- Removed kho_abort(). kho_finalize() is now re-entrant; calling it a
second time automatically flushes the previous serialized state and
generates a fresh one.
- Removed kho_out.finalized checks from preservation APIs, allowing
drivers to add/remove pages even after an initial finalization.
- Decoupled kexec_file_load from KHO finalization. The KHO FDT physical
address is now stable from boot, allowing the kexec image to be loaded
before the handover metadata is finalized.
FDT Management:
- The FDT is now updated in-place dynamically when subtrees are added or
removed, removing the need for complex reconstruction logic.
- The output FDT is always exposed in debugfs (initialized and zeroed at
boot), improving visibility and debugging capabilities throughout the
system lifecycle.
- Removed the redundant global preserved_mem_map pointer, establishing
the FDT property as the single source of truth.
New Features & API Enhancements:
- High-Level Allocators: Introduced kho_alloc_preserve() and friends to
reduce boilerplate for drivers that need to allocate, preserve, and
eventually restore simple memory buffers.
- Configuration: Added CONFIG_KEXEC_HANDOVER_ENABLE_DEFAULT to allow KHO
to be active by default without requiring the kho=on command line
parameter.
Fixes:
- Fixed potential alignment faults when accessing 64-bit FDT properties.
- Fixed the lifecycle of the FDT folio preservation (now preserved once
at init).
This patch (of 13):
The log message in kho_populate() currently states "Will skip init for
some devices". This implies that Kexec Handover always involves skipping
device initialization.
However, KHO is a generic mechanism used to preserve kernel memory across
reboot for various purposes, such as memfd, telemetry, or reserve_mem.
Skipping device initialization is a specific property of live update
drivers using KHO, not a property of the mechanism itself.
Remove the misleading suffix to accurately reflect the generic nature of
KHO discovery.
Link: https://lkml.kernel.org/r/20251114190002.3311679-2-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KHO allows clients to preserve memory regions at any point before the KHO
state is finalized. The finalization process itself involves KHO
performing its own actions, such as serializing the overall preserved
memory map.
If this finalization process is aborted, the current implementation
destroys KHO's internal memory tracking structures
(`kho_out.ser.track.orders`). This behavior effectively unpreserves all
memory from KHO's perspective, regardless of whether those preservations
were made by clients before the finalization attempt or by KHO itself
during finalization.
This premature unpreservation is incorrect. An abort of the finalization
process should only undo actions taken by KHO as part of that specific
finalization attempt. Individual memory regions preserved by clients
prior to finalization should remain preserved, as their lifecycle is
managed by the clients themselves. These clients might still need to call
kho_unpreserve_folio() or kho_unpreserve_phys() based on their own logic,
even after a KHO finalization attempt is aborted.
Link: https://lkml.kernel.org/r/20251101142325.1326536-7-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The KHO framework uses a notifier chain as the mechanism for clients to
participate in the finalization process. While this works for a single,
central state machine, it is too restrictive for kernel-internal
components like pstore/reserve_mem or IMA. These components need a
simpler, direct way to register their state for preservation (e.g., during
their initcall) without being part of a complex, shutdown-time notifier
sequence. The notifier model forces all participants into a single
finalization flow and makes direct preservation from an arbitrary context
difficult. This patch refactors the client participation model by
removing the notifier chain and introducing a direct API for managing FDT
subtrees.
The core kho_finalize() and kho_abort() state machine remains, but clients
now register their data with KHO beforehand.
Link: https://lkml.kernel.org/r/20251101142325.1326536-3-pasha.tatashin@soleen.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "liveupdate: Rework KHO for in-kernel users", v9.
This series refactors the KHO framework to better support in-kernel users
like the upcoming LUO. The current design, which relies on a notifier
chain and debugfs for control, is too restrictive for direct programmatic
use.
The core of this rework is the removal of the notifier chain in favor of a
direct registration API. This decouples clients from the shutdown-time
finalization sequence, allowing them to manage their preserved state more
flexibly and at any time.
In support of this new model, this series also:
- Makes the debugfs interface optional.
- Introduces APIs to unpreserve memory and fixes a bug in the abort
path where client state was being incorrectly discarded. Note that
this is an interim step, as a more comprehensive fix is planned as
part of the stateless KHO work [1].
- Moves all KHO code into a new kernel/liveupdate/ directory to
consolidate live update components.
This patch (of 9):
Currently, KHO is controlled via debugfs interface, but once LUO is
introduced, it can control KHO, and the debug interface becomes optional.
Add a separate config CONFIG_KEXEC_HANDOVER_DEBUGFS that enables the
debugfs interface, and allows to inspect the tree.
Move all debugfs related code to a new file to keep the .c files clear of
ifdefs.
Link: https://lkml.kernel.org/r/20251101142325.1326536-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20251101142325.1326536-2-pasha.tatashin@soleen.com
Link: https://lore.kernel.org/all/20251020100306.2709352-1-jasonmiu@google.com [1]
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
1. the numa parameter was straight up ignored.
2. nothing was done to check if the to-be-cached/allocated stack matches
the local node
The id remains ignored on free in case of memoryless nodes.
Note the current caching is already bad as the cache keeps overflowing
and a different solution is needed for the long run, to be worked
out(tm).
Stats collected over a kernel build with the patch with the following
topology:
NUMA node(s): 2
NUMA node0 CPU(s): 0-11
NUMA node1 CPU(s): 12-23
caller's node vs stack backing pages on free:
matching: 50083 (70%)
mismatched: 21492 (30%)
caching efficiency:
cached: 32651 (65.2%)
dropped: 17432 (34.8%)
Link: https://lkml.kernel.org/r/20251120054015.3019419-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The macro for_each_console_srcu iterates over all registered consoles. It's
implied that all registered consoles have CON_ENABLED flag set, making
the check for the flag unnecessary. Call console_is_usable function to
fully verify if the given console is usable before calling the ->unblank
callback.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-3-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Make do_proc_douintvec static and export proc_douintvec_conv wrapper
function for external use. This is to keep with the design in sysctl.c.
Update fs/pipe.c to use the new public API.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Create a converter for the pipe-max-size proc_handler using the
SYSCTL_UINT_CONV_CUSTOM. Move SYSCTL_CONV_IDENTITY macro to the sysctl
header to make it available for pipe size validation. Keep returning
-EINVAL when (val == 0) by using a range checking converter and setting
the minimal valid value (extern1) to SYSCTL_ONE. Keep round_pipe_size by
passing it as the operation for SYSCTL_USER_TO_KERN_INT_CONV.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move proc_doulongvec_ms_jiffies_minmax to kernel/time/jiffies.c. Create
a non static wrapper function proc_doulongvec_minmax_conv that
forwards the custom convmul and convdiv argument values to the internal
do_proc_doulongvec_minmax. Remove unused linux/times.h include from
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move integer jiffies converters (proc_dointvec{_,_ms_,_userhz_}jiffies
and proc_dointvec_ms_jiffies_minmax) to kernel/time/jiffies.c. Error
stubs for when CONFIG_PRCO_SYSCTL is not defined are not reproduced
because all the jiffies converters go through proc_dointvec_conv which
is already stubbed. This is part of the greater effort to move sysctl
logic out of kernel/sysctl.c thereby reducing merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move SYSCTL_USER_TO_KERN_UINT_CONV and SYSCTL_UINT_CONV_CUSTOM macros to
include/linux/sysctl.h. No need to embed sysctl_kern_to_user_uint_conv
in a macro as it will not need a custom kernel pointer operation. This
is a preparation commit to enable jiffies converter creation outside
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move direction macros (SYSCTL_{USER_TO_KERN,KERN_TO_USER}) and the
integer converter macros (SYSCTL_{USER_TO_KERN,KERN_TO_USER}_INT_CONV,
SYSCTL_INT_CONV_CUSTOM) into include/linux/sysctl.h. This is a
preparation commit to enable jiffies converter creation outside
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The new non-static proc_dointvec_conv forwards a custom converter
function to do_proc_dointvec from outside the sysctl scope. Rename the
do_proc_dointvec call points so any future changes to proc_dointvec_conv
are propagated in sysctl.c This is a preparation commit that allows the
integer jiffie converter functions to move out of kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Replace sysctl_user_to_kern_uint_conv function with
SYSCTL_USER_TO_KERN_UINT_CONV macro that accepts u_ptr_op parameter for
value transformation. Replacing sysctl_kern_to_user_uint_conv is not
needed as it will only be used from within sysctl.c. This is a
preparation commit for creating a custom converter in fs/pipe.c. No
Functional changes are intended.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Add k_ptr_range_check parameter to SYSCTL_UINT_CONV_CUSTOM macro to
enable range validation using table->extra1/extra2. Replace
do_proc_douintvec_minmax_conv with do_proc_uint_conv_minmax generated
by the updated macro.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Pass sysctl_{user_to_kern,kern_to_user}_uint_conv (unsigned integer
uni-directional converters) to the new SYSCTL_UINT_CONV_CUSTOM macro
to create do_proc_douintvec_conv's replacement (do_proc_uint_conv).
This is a preparation commit to use the unsigned integer converter from
outside sysctl. No functional change is intended.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Extend the SYSCTL_INT_CONV_CUSTOM macro with a k_ptr_range_check
parameter to conditionally generate range validation code. When enabled,
validation is done against table->extra1 (min) and table->extra2 (max)
bounds before assignment. Add base minmax and ms_jiffies_minmax
converter instances that utilize the range checking functionality.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
New SYSCTL_INT_CONV_CUSTOM macro creates "bi-directional" converters
from a user-to-kernel and a kernel-to-user functions. Replace integer
versions of do_proc_*_conv functions with the ones from the new macro.
Rename "_dointvec_" to just "_int_" as these converters are not applied
to vectors and the "do" is already in the name.
Move the USER_HZ validation directly into proc_dointvec_userhz_jiffies()
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Eight converter functions are created using two new macros
(SYSCTL_USER_TO_KERN_INT_CONV & SYSCTL_KERN_TO_USER_INT_CONV); they are
called from four pre-existing converter functions: do_proc_dointvec_conv
and do_proc_dointvec{,_userhz,_ms}_jiffies_conv. The function names
generated by the macros are differentiated by a string suffix passed as
the first macro argument.
The SYSCTL_USER_TO_KERN_INT_CONV macro first executes the u_ptr_op
operation, then checks for overflow, assigns sign (-, +) and finally
writes to the kernel var with WRITE_ONCE; it always returns an -EINVAL
when an overflow is detected. The SYSCTL_KERN_TO_USER_INT_CONV uses
READ_ONCE, casts to unsigned long, then executes the k_ptr_op before
assigning the value to the user space buffer.
The overflow check is always done against MAX_INT after applying
{k,u}_ptr_op. This approach avoids rounding or precision errors that
might occur when using the inverse operations.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Rename converter parameter to indicate data flow direction: "lvalp" to
"u_ptr" indicating a user space parsed value pointer. "valp" to "k_ptr"
indicating a kernel storage value pointer. This facilitates the
identification of discrepancies between direction (copy to kernel or
copy to user space) and the modified variable. This is a preparation
commit for when the converter functions are exposed to the rest of the
kernel.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
