The toeplitz.py test passed the hex mask without "0x" prefix (e.g.,
"300" for CPUs 8,9). The toeplitz.c strtoul() call wrongly parsed this
as decimal 300 (0x12c) instead of hex 0x300.
Pass the prefixed mask to toeplitz.c, and the unprefixed one to sysfs.
Fixes: 9cf9aa77a1 ("selftests: drv-net: hw: convert the Toeplitz test to Python")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260112173715.384843-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds a test case for netdevsim carrier state consistency.
Specifically, the added test verifies the carrier state during the
following operations:
1. Unlink two netdevsims
2. ifdown one netdevsim, then ifup again
3. Link the netdevsims again
4. ifdown one netdevsim, then ifup again
These steps verifies that the carrier is UP iff two netdevsims are
linked and ifuped.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/481e2729e53b6074ebfc0ad85764d8feb244de8c.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
Currently, tolerance is computed against the TC’s expected percentage,
making TC3 (20%) validation overly strict and TC4 (80%) overly loose.
Update BandwidthValidator to take a dict of shares and compute bounds
relative to the overall total, so that all shares are validated
consistently.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-7-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes some noise that can be distracting while looking at
selftests by redirecting socat stderr to /dev/null.
Before this commit, netcons_basic would output:
Running with target mode: basic (ipv6)
2025/11/29 12:08:03 socat[259] W exiting on signal 15
2025/11/29 12:08:03 socat[271] W exiting on signal 15
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
2025/11/29 12:08:05 socat[329] W exiting on signal 15
2025/11/29 12:08:05 socat[322] W exiting on signal 15
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[380] W exiting on signal 15
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
2025/11/29 12:08:10 socat[440] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
extended : ipv4 : Test passed
After these changes, output looks like:
Running with target mode: basic (ipv6)
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
extended : ipv4 : Test passed
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b9 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit ensures that the required log level is set at the start of
the test iteration.
Part of the cleanup performed at the end of each test iteration resets
the log level (do_cleanup in lib_netcons.sh) to the values defined at the
time test script started. This may cause further test iterations to fail
if the default values are not sufficient.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-netcons-basic-loglevel-v1-1-577f8586159c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase the receiver timeout. When running between machines
in different geographic regions the test needs more than
a second to SSH across and send the frames.
The bkg() command that runs the receiver defaults to 5 sec timeout,
so using 4 sec sounds like a reasonable value for the receiver itself.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like the liburing is not updated by distros very aggressively.
Presumably because a lot of packages depend on it. I just updated
to Fedora 43 and it's still on liburing 2.9. The test is 9mo old,
at this stage I think this warrants handling the build failure
more gracefully.
Detect if iouring is recent enough and if not print a warning
and exclude the C prog from build. The Python test will just
fail since the binary won't exist. But it removes the major
annoyance of having to update liburing from sources when
developing other tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test querying default values and resetting to default values for
netdevsim devlink params.
This should cover the basic paths of interest: driverinit and
non-driverinit cmodes, as well as bool and non-bool value
type. Default param values of type bool are encoded with u8 netlink
type as opposed to flag type, so that userspace can distinguish
"not-present" from false.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-7-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase MAX_USERDATA_ITEMS from 16 to 256 entries now that the userdata
buffer is allocated dynamically.
The previous limit of 16 was necessary because the buffer was statically
allocated for all targets. With dynamic allocation, we can support more
entries without wasting memory on targets that don't use userdata.
This allows users to attach more metadata to their netconsole messages,
which is useful for complex debugging and logging scenarios.
Also update the testcase accordingly.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-4-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite the existing toeplitz.sh test in Python. The conversion
is a lot less exact than the GRO one. We use Netlink APIs to
get the device RSS and IRQ information. We expect that the device
has neither RPS nor RFS configured, and set RPS up as part of
the test.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite the existing gro.sh test in Python. The conversion
not exact, the changes are related to integrating the test
with our "remote endpoint" paradigm. The test now reads
the IP addresses from the user config. It resolves the MAC
address (including running over Layer 3 networks).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're already saving the info about the local dev in env.dev
for the tests, save remote dev as well. This is more symmetric,
env generally provides the same info for local and remote end.
While at it make sure that we reliably get the detailed info
about the local dev. nsim used to read the dev info without -d.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO test can run on a real device or a veth.
The Toeplitz hash test can only run on a real device.
Move them from net/ to drivers/net/ and drivers/net/hw/ respectively.
There are two scripts which set up the environment for these tests
setup_loopback.sh and setup_veth.sh. Move those scripts to net/lib.
The paths to the setup files are a little ugly but they will be
deleted shortly.
toeplitz_client.sh is not a test in itself, but rather a helper
to send traffic, so add it to TEST_FILES rather than TEST_PROGS.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a lot of cases where we try to re-run the same code with
different parameters. We currently need to either use a generator
method or create a "main" case implementation which then gets called
by trivial case functions:
def _test(x, y, z):
...
def case_int():
_test(1, 2, 3)
def case_str():
_test('a', 'b', 'c')
Add support for variants, similar to kselftests_harness.h and
a lot of other frameworks. Variants can be added as decorator
to test functions:
@ksft_variants([(1, 2, 3), ('a', 'b', 'c')])
def case(x, y, z):
...
ksft_run() will auto-generate case names:
case.1_2_3
case.a_b_c
Because the names may not always be pretty (and to avoid forcing
classes to implement case-friendly __str__()) add a wrapper class
KsftNamedVariant which lets the user specify the name for the variant.
Note that ksft_run's args are still supported. ksft_run splices args
and variant params together.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XDP qstats tests send 2k packets over a single socket.
Looks like when netdev CI is busy running those tests in QEMU
occasionally flakes. The target doesn't get to run at all
before all 2000 packets are sent.
Lower the number of packets to 1000 and reopen the socket
every 50 packets, to give RSS a chance to spread the packets
to multiple queues.
For the netdev CI testing either lowering the count or using
multiple sockets is enough, but let's do both for extra resiliency.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251113152703.3819756-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For NICs with a large (1024+) number of queues, this test can cause
excessive memory fragmentation. This results in OOM errors, and in the
worst case driver/kernel crashes. We don't need to test with the max number
of queues, just enough to create a high likelihood of races between
reconfiguration and stats getting read.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251111225319.3019542-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a netconsole test that puts a lot of pressure on the netconsole
list manipulation. Do it by creating dynamic targets and deleting
targets while messages are being sent. Also put interface down while the
messages are being sent, as creating parallel targets.
The code launches three background jobs on distinct schedules:
* Toggle netcons target every 30 iterations
* create and delete random_target every 50 iterations
* toggle iface every 70 iterations
This creates multiple concurrency sources that interact with netconsole
states. This is good practice to simulate stress, and exercise netpoll
and netconsole locks.
This test already found an issue as reported in [1]
Link: https://lore.kernel.org/all/20250901-netpoll_memleak-v1-1-34a181977dfc@debian.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-3-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the netconsole target creation from create_dynamic_target(), by
moving it from create_dynamic_target() into a new helper function. This
enables other tests to use the creation of netconsole targets with
arbitrary parameters and no sleep.
The new helper will be utilized by forthcoming torture-type selftests
that require dynamic target management.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-2-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
