[ Upstream commit f5e1e5ec20 ]
move_local_task_to_local_dsq() is used when moving a task from a non-local
DSQ to a local DSQ on the same CPU. It directly manipulates the local DSQ
without going through dispatch_enqueue() and was missing the post-enqueue
handling that triggers preemption when SCX_ENQ_PREEMPT is set or the idle
task is running.
The function is used by move_task_between_dsqs() which backs
scx_bpf_dsq_move() and may be called while the CPU is busy.
Add local_dsq_post_enq() call to move_local_task_to_local_dsq(). As the
dispatch path doesn't need post-enqueue handling, add SCX_RQ_IN_BALANCE
early exit to keep consume_dispatch_q() behavior unchanged and avoid
triggering unnecessary resched when scx_bpf_dsq_move() is used from the
dispatch path.
Fixes: 4c30f5ce4f ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 530b6637c7 ]
Factor out local_dsq_post_enq() which performs post-enqueue handling for
local DSQs - triggering resched_curr() if SCX_ENQ_PREEMPT is specified or if
the current CPU is idle. No functional change.
This will be used by the next patch to fix move_local_task_to_local_dsq().
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1dd6c84f1c ]
When loading the ebpf scheduler, the tasks in the scx_tasks list will
be traversed and invoke __setscheduler_class() to get new sched_class.
however, this would also incorrectly set the per-cpu migration
task's->sched_class to rt_sched_class, even after unload, the per-cpu
migration task's->sched_class remains sched_rt_class.
The log for this issue is as follows:
./scx_rustland --stats 1
[ 199.245639][ T630] sched_ext: "rustland" does not implement cgroup cpu.weight
[ 199.269213][ T630] sched_ext: BPF scheduler "rustland" enabled
04:25:09 [INFO] RustLand scheduler attached
bpftrace -e 'iter:task /strcontains(ctx->task->comm, "migration")/
{ printf("%s:%d->%pS\n", ctx->task->comm, ctx->task->pid, ctx->task->sched_class); }'
Attaching 1 probe...
migration/0:24->rt_sched_class+0x0/0xe0
migration/1:27->rt_sched_class+0x0/0xe0
migration/2:33->rt_sched_class+0x0/0xe0
migration/3:39->rt_sched_class+0x0/0xe0
migration/4:45->rt_sched_class+0x0/0xe0
migration/5:52->rt_sched_class+0x0/0xe0
migration/6:58->rt_sched_class+0x0/0xe0
migration/7:64->rt_sched_class+0x0/0xe0
sched_ext: BPF scheduler "rustland" disabled (unregistered from user space)
EXIT: unregistered from user space
04:25:21 [INFO] Unregister RustLand scheduler
bpftrace -e 'iter:task /strcontains(ctx->task->comm, "migration")/
{ printf("%s:%d->%pS\n", ctx->task->comm, ctx->task->pid, ctx->task->sched_class); }'
Attaching 1 probe...
migration/0:24->rt_sched_class+0x0/0xe0
migration/1:27->rt_sched_class+0x0/0xe0
migration/2:33->rt_sched_class+0x0/0xe0
migration/3:39->rt_sched_class+0x0/0xe0
migration/4:45->rt_sched_class+0x0/0xe0
migration/5:52->rt_sched_class+0x0/0xe0
migration/6:58->rt_sched_class+0x0/0xe0
migration/7:64->rt_sched_class+0x0/0xe0
This commit therefore generate a new scx_setscheduler_class() and
add check for stop_sched_class to replace __setscheduler_class().
Fixes: f0e1a0643a ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 79f3f9bedd ]
Basically, from the constraint that the sum of lag is zero, you can
infer that the 0-lag point is the weighted average of the individual
vruntime, which is what we're trying to compute:
\Sum w_i * v_i
avg = --------------
\Sum w_i
Now, since vruntime takes the whole u64 (worse, it wraps), this
multiplication term in the numerator is not something we can compute;
instead we do the min_vruntime (v0 henceforth) thing like:
v_i = (v_i - v0) + v0
This does two things:
- it keeps the key: (v_i - v0) 'small';
- it creates a relative 0-point in the modular space.
If you do that subtitution and work it all out, you end up with:
\Sum w_i * (v_i - v0)
avg = --------------------- + v0
\Sum w_i
Since you cannot very well track a ratio like that (and not suffer
terrible numerical problems) we simpy track the numerator and
denominator individually and only perform the division when strictly
needed.
Notably, the numerator lives in cfs_rq->avg_vruntime and the denominator
lives in cfs_rq->avg_load.
The one extra 'funny' is that these numbers track the entities in the
tree, and current is typically outside of the tree, so avg_vruntime()
adds current when needed before doing the division.
(vruntime_eligible() elides the division by cross-wise multiplication)
Anyway, as mentioned above, we currently use the CFS era min_vruntime
for this purpose. However, this thing can only move forward, while the
above avg can in fact move backward (when a non-eligible task leaves,
the average becomes smaller), this can cause trouble when through
happenstance (or construction) these values drift far enough apart to
wreck the game.
Replace cfs_rq::min_vruntime with cfs_rq::zero_vruntime which is kept
near/at avg_vruntime, following its motion.
The down-side is that this requires computing the avg more often.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251106111741.GC4068168@noisy.programming.kicks-ass.net
Cc: stable@vger.kernel.org
[ Adjust context in comments + init_cfs_rq ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47ef834209 upstream.
The commit 4d38328eb4 ("tracing: Fix synth event printk format for str
fields") replaced "%.*s" with "%s" but missed removing the number size of
the dynamic and static strings. The commit e1a453a57b ("tracing: Do not
add length to print format in synthetic events") fixed the dynamic part
but did not fix the static part. That is, with the commands:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
That caused the output of:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
The commit e1a453a57b fixed the part where the synthetic event had
"char[] wakee". But if one were to replace that with a static size string:
# echo 's:wake_lat char[16] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
Where "wakee" is defined as "char[16]" and not "char[]" making it a static
size, the code triggered the "(efaul)" again.
Remove the added STR_VAR_LEN_MAX size as the string is still going to be
nul terminated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://patch.msgid.link/20251204151935.5fa30355@gandalf.local.home
Fixes: e1a453a57b ("tracing: Do not add length to print format in synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 690e47d140 upstream.
Overview
========
When a CPU chooses to call push_rt_task and picks a task to push to
another CPU's runqueue then it will call find_lock_lowest_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Crashes
=======
This bug resulted in quite a few flavors of crashes triggering kernel
panics with various crash signatures such as assert failures, page
faults, null pointer dereferences, and queue corruption errors all
coming from scheduler itself.
Some of the crashes:
-> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? pick_next_task_rt+0x6e/0x1d0
? do_error_trap+0x64/0xa0
? pick_next_task_rt+0x6e/0x1d0
? exc_invalid_op+0x4c/0x60
? pick_next_task_rt+0x6e/0x1d0
? asm_exc_invalid_op+0x12/0x20
? pick_next_task_rt+0x6e/0x1d0
__schedule+0x5cb/0x790
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: kernel NULL pointer dereference, address: 00000000000000c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? __warn+0x8a/0xe0
? exc_page_fault+0x3d6/0x520
? asm_exc_page_fault+0x1e/0x30
? pick_next_task_rt+0xb5/0x1d0
? pick_next_task_rt+0x8c/0x1d0
__schedule+0x583/0x7e0
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: unable to handle page fault for address: ffff9464daea5900
kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p))
-> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? dequeue_top_rt_rq+0xa2/0xb0
? do_error_trap+0x64/0xa0
? dequeue_top_rt_rq+0xa2/0xb0
? exc_invalid_op+0x4c/0x60
? dequeue_top_rt_rq+0xa2/0xb0
? asm_exc_invalid_op+0x12/0x20
? dequeue_top_rt_rq+0xa2/0xb0
dequeue_rt_entity+0x1f/0x70
dequeue_task_rt+0x2d/0x70
__schedule+0x1a8/0x7e0
? blk_finish_plug+0x25/0x40
schedule+0x3c/0xb0
futex_wait_queue_me+0xb6/0x120
futex_wait+0xd9/0x240
do_futex+0x344/0xa90
? get_mm_exe_file+0x30/0x60
? audit_exe_compare+0x58/0x70
? audit_filter_rules.constprop.26+0x65e/0x1220
__x64_sys_futex+0x148/0x1f0
do_syscall_64+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x62/0xc7
-> BUG: unable to handle page fault for address: ffff8cf3608bc2c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? spurious_kernel_fault+0x171/0x1c0
? exc_page_fault+0x3b6/0x520
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? asm_exc_page_fault+0x1e/0x30
? _cond_resched+0x15/0x30
? futex_wait_queue_me+0xc8/0x120
? futex_wait+0xd9/0x240
? try_to_wake_up+0x1b8/0x490
? futex_wake+0x78/0x160
? do_futex+0xcd/0xa90
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? plist_del+0x6a/0xd0
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? dequeue_pushable_task+0x20/0x70
? __schedule+0x382/0x7e0
? asm_sysvec_reschedule_ipi+0xa/0x20
? schedule+0x3c/0xb0
? exit_to_user_mode_prepare+0x9e/0x150
? irqentry_exit_to_user_mode+0x5/0x30
? asm_sysvec_reschedule_ipi+0x12/0x20
Above are some of the common examples of the crashes that were observed
due to this issue.
Details
=======
Let's look at the following scenario to understand this race.
1) CPU A enters push_rt_task
a) CPU A has chosen next_task = task p.
b) CPU A calls find_lock_lowest_rq(Task p, CPU Z’s rq).
c) CPU A identifies CPU X as a destination CPU (X < Z).
d) CPU A enters double_lock_balance(CPU Z’s rq, CPU X’s rq).
e) Since X is lower than Z, CPU A unlocks CPU Z’s rq. Someone else has
locked CPU X’s rq, and thus, CPU A must wait.
2) At CPU Z
a) Previous task has completed execution and thus, CPU Z enters
schedule, locks its own rq after CPU A releases it.
b) CPU Z dequeues previous task and begins executing task p.
c) CPU Z unlocks its rq.
d) Task p yields the CPU (ex. by doing IO or waiting to acquire a
lock) which triggers the schedule function on CPU Z.
e) CPU Z enters schedule again, locks its own rq, and dequeues task p.
f) As part of dequeue, it sets p.on_rq = 0 and unlocks its rq.
3) At CPU B
a) CPU B enters try_to_wake_up with input task p.
b) Since CPU Z dequeued task p, p.on_rq = 0, and CPU B updates
B.state = WAKING.
c) CPU B via select_task_rq determines CPU Y as the target CPU.
4) The race
a) CPU A acquires CPU X’s lock and relocks CPU Z.
b) CPU A reads task p.cpu = Z and incorrectly concludes task p is
still on CPU Z.
c) CPU A failed to notice task p had been dequeued from CPU Z while
CPU A was waiting for locks in double_lock_balance. If CPU A knew
that task p had been dequeued, it would return NULL forcing
push_rt_task to give up the task p's migration.
d) CPU B updates task p.cpu = Y and calls ttwu_queue.
e) CPU B locks Ys rq. CPU B enqueues task p onto Y and sets task
p.on_rq = 1.
f) CPU B unlocks CPU Y, triggering memory synchronization.
g) CPU A reads task p.on_rq = 1, cementing its assumption that task p
has not migrated.
h) CPU A decides to migrate p to CPU X.
This leads to A dequeuing p from Y's queue and various crashes down the
line.
Solution
========
The solution here is fairly simple. After obtaining the lock (at 4a),
the check is enhanced to make sure that the task is still at the head of
the pushable tasks list. If not, then it is anyway not suitable for
being pushed out.
Testing
=======
The fix is tested on a cluster of 3 nodes, where the panics due to this
are hit every couple of days. A fix similar to this was deployed on such
cluster and was stable for more than 30 days.
Co-developed-by: Jon Kohler <jon@nutanix.com>
Signed-off-by: Jon Kohler <jon@nutanix.com>
Co-developed-by: Gauri Patwardhan <gauri.patwardhan@nutanix.com>
Signed-off-by: Gauri Patwardhan <gauri.patwardhan@nutanix.com>
Co-developed-by: Rahul Chunduru <rahul.chunduru@nutanix.com>
Signed-off-by: Rahul Chunduru <rahul.chunduru@nutanix.com>
Signed-off-by: Harshit Agarwal <harshit@nutanix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Will Ton <william.ton@nutanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225180553.167995-1-harshit@nutanix.com
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08bd4c46d5 upstream.
__scs_magic() needs a 'void *' variable, but a 'struct task_struct *' is
given. 'task_scs(tsk)' is the starting address of the task's shadow call
stack, and '__scs_magic(task_scs(tsk))' is the end address of the task's
shadow call stack. Here should be '__scs_magic(task_scs(tsk))'.
The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGE
is enabled, the shadow call stack usage checking function
(scs_check_usage) would scan an incorrect memory range. This could lead
to:
1. **Inaccurate stack usage reporting**: The function would calculate
wrong usage statistics for the shadow call stack, potentially showing
incorrect value in kmsg.
2. **Potential kernel crash**: If the value of __scs_magic(tsk)is
greater than that of __scs_magic(task_scs(tsk)), the for loop may
access unmapped memory, potentially causing a kernel panic. However,
this scenario is unlikely because task_struct is allocated via the slab
allocator (which typically returns lower addresses), while the shadow
call stack returned by task_scs(tsk) is allocated via vmalloc(which
typically returns higher addresses).
However, since this is purely a debugging feature
(CONFIG_DEBUG_STACK_USAGE), normal production systems should be not
unaffected. The bug only impacts developers and testers who are actively
debugging stack usage with this configuration enabled.
Link: https://lkml.kernel.org/r/20251011082222.12965-1-zhichi.lin@vivo.com
Fixes: 5bbaf9d1fc ("scs: Add support for stack usage debugging")
Signed-off-by: Jiyuan Xie <xiejiyuan@vivo.com>
Signed-off-by: Zhichi Lin <zhichi.lin@vivo.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3f9f42232 upstream.
Currently when the length of a symbol is longer than 0x7f characters,
its type shown in /proc/kallsyms can be incorrect.
I found this issue when reading the code, but it can be reproduced by
following steps:
1. Define a function which symbol length is 130 characters:
#define X13(x) x##x##x##x##x##x##x##x##x##x##x##x##x
static noinline void X13(x123456789)(void)
{
printk("hello world\n");
}
2. The type in vmlinux is 't':
$ nm vmlinux | grep x123456
ffffffff816290f0 t x123456789x123456789x123456789x12[...]
3. Then boot the kernel, the type shown in /proc/kallsyms becomes 'g'
instead of the expected 't':
# cat /proc/kallsyms | grep x123456
ffffffff816290f0 g x123456789x123456789x123456789x12[...]
The root cause is that, after commit 73bbb94466 ("kallsyms: support
"big" kernel symbols"), ULEB128 was used to encode symbol name length.
That is, for "big" kernel symbols of which name length is longer than
0x7f characters, the length info is encoded into 2 bytes.
kallsyms_get_symbol_type() expects to read the first char of the
symbol name which indicates the symbol type. However, due to the
"big" symbol case not being handled, the symbol type read from
/proc/kallsyms may be wrong, so handle it properly.
Cc: stable@vger.kernel.org
Fixes: 73bbb94466 ("kallsyms: support "big" kernel symbols")
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20241011143853.3022643-1-zhengyejian@huaweicloud.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 139560e8b9 ]
When there is only one function of the same name, old_sympos of 0 and 1
are logically identical. Match them in klp_find_func().
This is to avoid a corner case with different toolchain behavior.
In this specific issue, two versions of kpatch-build were used to
build livepatch for the same kernel. One assigns old_sympos == 0 for
unique local functions, the other assigns old_sympos == 1 for unique
local functions. Both versions work fine by themselves. (PS: This
behavior change was introduced in a downstream version of kpatch-build.
This change does not exist in upstream kpatch-build.)
However, during livepatch upgrade (with the replace flag set) from a
patch built with one version of kpatch-build to the same fix built with
the other version of kpatch-build, livepatching fails with errors like:
[ 14.218706] sysfs: cannot create duplicate filename 'xxx/somefunc,1'
...
[ 14.219466] Call Trace:
[ 14.219468] <TASK>
[ 14.219469] dump_stack_lvl+0x47/0x60
[ 14.219474] sysfs_warn_dup.cold+0x17/0x27
[ 14.219476] sysfs_create_dir_ns+0x95/0xb0
[ 14.219479] kobject_add_internal+0x9e/0x260
[ 14.219483] kobject_add+0x68/0x80
[ 14.219485] ? kstrdup+0x3c/0xa0
[ 14.219486] klp_enable_patch+0x320/0x830
[ 14.219488] patch_init+0x443/0x1000 [ccc_0_6]
[ 14.219491] ? 0xffffffffa05eb000
[ 14.219492] do_one_initcall+0x2e/0x190
[ 14.219494] do_init_module+0x67/0x270
[ 14.219496] init_module_from_file+0x75/0xa0
[ 14.219499] idempotent_init_module+0x15a/0x240
[ 14.219501] __x64_sys_finit_module+0x61/0xc0
[ 14.219503] do_syscall_64+0x5b/0x160
[ 14.219505] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 14.219507] RIP: 0033:0x7f545a4bd96d
...
[ 14.219516] kobject: kobject_add_internal failed for somefunc,1 with
-EEXIST, don't try to register things with the same name ...
This happens because klp_find_func() thinks somefunc with old_sympos==0
is not the same as somefunc with old_sympos==1, and klp_add_object_nops
adds another xxx/func,1 to the list of functions to patch.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
[pmladek@suse.com: Fixed some typos.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 382748c05e ]
Commit 16b269436b ("sched/deadline: Modify cpudl::free_cpus
to reflect rd->online") introduced the cpudl_set/clear_freecpu
functions to allow the cpu_dl::free_cpus mask to be manipulated
by the deadline scheduler class rq_on/offline callbacks so the
mask would also reflect this state.
Commit 9659e1eeee ("sched/deadline: Remove cpu_active_mask
from cpudl_find()") removed the check of the cpu_active_mask to
save some processing on the premise that the cpudl::free_cpus
mask already reflected the runqueue online state.
Unfortunately, there are cases where it is possible for the
cpudl_clear function to set the free_cpus bit for a CPU when the
deadline runqueue is offline. When this occurs while a CPU is
connected to the default root domain the flag may retain the bad
state after the CPU has been unplugged. Later, a different CPU
that is transitioning through the default root domain may push a
deadline task to the powered down CPU when cpudl_find sees its
free_cpus bit is set. If this happens the task will not have the
opportunity to run.
One example is outlined here:
https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.com
Another occurs when the last deadline task is migrated from a
CPU that has an offlined runqueue. The dequeue_task member of
the deadline scheduler class will eventually call cpudl_clear
and set the free_cpus bit for the CPU.
This commit modifies the cpudl_clear function to be aware of the
online state of the deadline runqueue so that the free_cpus mask
can be updated appropriately.
It is no longer necessary to manage the mask outside of the
cpudl_set/clear functions so the cpudl_set/clear_freecpu
functions are removed. In addition, since the free_cpus mask is
now only updated under the cpudl lock the code was changed to
use the non-atomic __cpumask functions.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca125231dd ]
When a task is migrated out, there is a probability that the tg->load_avg
value will become abnormal. The reason is as follows:
1. Due to the 1ms update period limitation in update_tg_load_avg(), there
is a possibility that the reduced load_avg is not updated to tg->load_avg
when a task migrates out.
2. Even though __update_blocked_fair() traverses the leaf_cfs_rq_list and
calls update_tg_load_avg() for cfs_rqs that are not fully decayed, the key
function cfs_rq_is_decayed() does not check whether
cfs->tg_load_avg_contrib is null. Consequently, in some cases,
__update_blocked_fair() removes cfs_rqs whose avg.load_avg has not been
updated to tg->load_avg.
Add a check of cfs_rq->tg_load_avg_contrib in cfs_rq_is_decayed(),
which fixes the case (2.) mentioned above.
Fixes: 1528c661c2 ("sched/fair: Ratelimit update to tg->load_avg")
Signed-off-by: xupengbo <xupengbo@oppo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Link: https://patch.msgid.link/20250827022208.14487-1-xupengbo@oppo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb3acdebf ]
Commit 97523a4edb ("kernel/resource: remove first_lvl / siblings_only
logic") removed an optimization introduced by commit 756398750e
("resource: avoid unnecessary lookups in find_next_iomem_res()"). That
was not called out in the message of the first commit explicitly so it's
not entirely clear whether removing the optimization happened
inadvertently or not.
As the original commit message of the optimization explains there is no
point considering the children of a subtree in find_next_iomem_res() if
the top level range does not match.
Reinstating the optimization results in performance improvements in
systems where /proc/iomem is ~5k lines long. Calling mmap() on /dev/mem
in such platforms takes 700-1500μs without the optimisation and 10-50μs
with the optimisation.
Note that even though commit 97523a4edb removed the 'sibling_only'
parameter from next_resource(), newer kernels have basically reinstated it
under the name 'skip_children'.
Link: https://lore.kernel.org/all/20251124165349.3377826-1-ilstam@amazon.com/T/#u
Fixes: 97523a4edb ("kernel/resource: remove first_lvl / siblings_only logic")
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1bcaed1e3 ]
Currently, the check for whether a partition is populated does not
account for tasks in the cpuset of attaching. This is a corner case
that can leave a task stuck in a partition with no effective CPUs.
The race condition occurs as follows:
cpu0 cpu1
//cpuset A with cpu N
migrate task p to A
cpuset_can_attach
// with effective cpus
// check ok
// cpuset_mutex is not held // clear cpuset.cpus.exclusive
// making effective cpus empty
update_exclusive_cpumask
// tasks_nocpu_error check ok
// empty effective cpus, partition valid
cpuset_attach
...
// task p stays in A, with non-effective cpus.
To fix this issue, this patch introduces cs_is_populated, which considers
tasks in the attaching cpuset. This new helper is used in validate_change
and partition_is_populated.
Fixes: e2d59900d9 ("cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dc211c115 ]
Syzkaller triggers an invalid memory access issue following fault
injection in update_effective_progs. The issue can be described as
follows:
__cgroup_bpf_detach
update_effective_progs
compute_effective_progs
bpf_prog_array_alloc <-- fault inject
purge_effective_progs
/* change to dummy_bpf_prog */
array->items[index] = &dummy_bpf_prog.prog
---softirq start---
__do_softirq
...
__cgroup_bpf_run_filter_skb
__bpf_prog_run_save_cb
bpf_prog_run
stats = this_cpu_ptr(prog->stats)
/* invalid memory access */
flags = u64_stats_update_begin_irqsave(&stats->syncp)
---softirq end---
static_branch_dec(&cgroup_bpf_enabled_key[atype])
The reason is that fault injection caused update_effective_progs to fail
and then changed the original prog into dummy_bpf_prog.prog in
purge_effective_progs. Then a softirq came, and accessing the members of
dummy_bpf_prog.prog in the softirq triggers invalid mem access.
To fix it, skip updating stats when stats is NULL.
Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20251115102343.2200727-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6af6e49a76 ]
As [lru_,]percpu_hash maps support BPF_KPTR_{REF,PERCPU}, missing
calls to 'bpf_obj_free_fields()' in 'pcpu_copy_value()' could cause the
memory referenced by BPF_KPTR_{REF,PERCPU} fields to be held until the
map gets freed.
Fix this by calling 'bpf_obj_free_fields()' after
'copy_map_value[,_long]()' in 'pcpu_copy_value()'.
Fixes: 65334e64a4 ("bpf: Support kptrs in percpu hashmap and percpu LRU hashmap")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251105151407.12723-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e52b43883d ]
With CONFIG_CPUMASK_OFFSTACK=y, the 'bind_writers' buffer is allocated via
alloc_cpumask_var() in param_set_cpumask(). But it is not freed, when
setting the module parameter multiple times by sysfs interface or removing
module.
Below kmemleak trace is seen for this issue:
unreferenced object 0xffff888100aabff8 (size 8):
comm "bash", pid 323, jiffies 4295059233
hex dump (first 8 bytes):
07 00 00 00 00 00 00 00 ........
backtrace (crc ac50919):
__kmalloc_node_noprof+0x2e5/0x420
alloc_cpumask_var_node+0x1f/0x30
param_set_cpumask+0x26/0xb0 [locktorture]
param_attr_store+0x93/0x100
module_attr_store+0x1b/0x30
kernfs_fop_write_iter+0x114/0x1b0
vfs_write+0x300/0x410
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This issue can be reproduced by:
insmod locktorture.ko bind_writers=1
rmmod locktorture
or:
insmod locktorture.ko bind_writers=1
echo 2 > /sys/module/locktorture/parameters/bind_writers
Considering that setting the module parameter 'bind_writers' or
'bind_readers' by sysfs interface has no real effect, set the parameter
permissions to 0444. To fix the memory leak when removing module, free
'bind_writers' and 'bind_readers' memory in lock_torture_cleanup().
Fixes: 73e3412424 ("locktorture: Add readers_bind and writers_bind module parameters")
Suggested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17d62fedd ]
Extract the duplicated maximum allowed depth computation for stack
traces stored in BPF stacks from bpf_get_stackid() and __bpf_get_stack()
into a dedicated stack_map_calculate_max_depth() helper function.
This unifies the logic for:
- The max depth computation
- Enforcing the sysctl_perf_event_max_stack limit
No functional changes for existing code paths.
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20251025192858.31424-1-contact@arnaud-lcm.com
Stable-dep-of: 23f852daa4 ("bpf: Fix stackmap overflow check in __bpf_get_stackid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79104becf4 ]
If a task yields, the scheduler may decide to pick it again. The task in
turn may decide to yield immediately or shortly after, leading to a tight
loop of yields.
If there's another runnable task as this point, the deadline will be
increased by the slice at each loop. This can cause the deadline to runaway
pretty quickly, and subsequent elevated run delays later on as the task
doesn't get picked again. The reason the scheduler can pick the same task
again and again despite its deadline increasing is because it may be the
only eligible task at that point.
Fix this by making the task forfeiting its remaining vruntime and pushing
the deadline one slice ahead. This implements yield behavior more
authentically.
We limit the forfeiting to eligible tasks. This is because core scheduling
prefers running ineligible tasks rather than force idling. As such, without
the condition, we can end up on a yield loop which makes the vruntime
increase rapidly, leading to anomalous run delays later down the line.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250401123622.584018-1-sieberf@amazon.com
Link: https://lore.kernel.org/r/20250911095113.203439-1-sieberf@amazon.com
Link: https://lore.kernel.org/r/20250916140228.452231-1-sieberf@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e9a18e1c3 ]
ftrace_hash_ipmodify_enable() checks IPMODIFY and DIRECT ftrace_ops on
the same kernel function. When needed, ftrace_hash_ipmodify_enable()
calls ops->ops_func() to prepare the direct ftrace (BPF trampoline) to
share the same function as the IPMODIFY ftrace (livepatch).
ftrace_hash_ipmodify_enable() is called in register_ftrace_direct() path,
but not called in modify_ftrace_direct() path. As a result, the following
operations will break livepatch:
1. Load livepatch to a kernel function;
2. Attach fentry program to the kernel function;
3. Attach fexit program to the kernel function.
After 3, the kernel function being used will not be the livepatched
version, but the original version.
Fix this by adding __ftrace_hash_update_ipmodify() to
__modify_ftrace_direct() and adjust some logic around the call.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c14ecb555c upstream.
KCSAN reports:
BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lock
write (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1:
do_raw_write_lock+0x120/0x204
_raw_write_lock_irq
do_exit
call_usermodehelper_exec_async
ret_from_fork
read to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0:
do_raw_write_lock+0x88/0x204
_raw_write_lock_irq
do_exit
call_usermodehelper_exec_async
ret_from_fork
value changed: 0xffffffff -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111
Commit 1a365e8223 ("locking/spinlock/debug: Fix various data races") has
adressed most of these races, but seems to be not consistent/not complete.
>From do_raw_write_lock() only debug_write_lock_after() part has been
converted to WRITE_ONCE(), but not debug_write_lock_before() part.
Do it now.
Fixes: 1a365e8223 ("locking/spinlock/debug: Fix various data races")
Reported-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20739af073 upstream.
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.
Fixes: 0cc04e8045 ("timers: Add shutdown mechanism to the internal functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56b3c85e15 upstream.
When livepatch is attached to the same function as bpf trampoline with
a fexit program, bpf trampoline code calls register_ftrace_direct()
twice. The first time will fail with -EAGAIN, and the second time it
will succeed. This requires register_ftrace_direct() to unregister
the address on the first attempt. Otherwise, the bpf trampoline cannot
attach. Here is an easy way to reproduce this issue:
insmod samples/livepatch/livepatch-sample.ko
bpftrace -e 'fexit:cmdline_proc_show {}'
ERROR: Unable to attach probe: fexit:vmlinux:cmdline_proc_show...
Fix this by cleaning up the hash when register_ftrace_function_nolock hits
errors.
Also, move the code that resets ops->func and ops->trampoline to the error
path of register_ftrace_direct(); and add a helper function reset_direct()
in register_ftrace_direct() and unregister_ftrace_direct().
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Closes: https://lore.kernel.org/live-patching/c5058315a39d4615b333e485893345be@crowdstrike.com/
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00fbff75c5 upstream.
When crashkernel is configured with a high reservation, shrinking its
value below the low crashkernel reservation causes two issues:
1. Invalid crashkernel resource objects
2. Kernel crash if crashkernel shrinking is done twice
For example, with crashkernel=200M,high, the kernel reserves 200MB of high
memory and some default low memory (say 256MB). The reservation appears
as:
cat /proc/iomem | grep -i crash
af000000-beffffff : Crash kernel
433000000-43f7fffff : Crash kernel
If crashkernel is then shrunk to 50MB (echo 52428800 >
/sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved:
af000000-beffffff : Crash kernel
Instead, it should show 50MB:
af000000-b21fffff : Crash kernel
Further shrinking crashkernel to 40MB causes a kernel crash with the
following trace (x86):
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip...>
Call Trace: <TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __release_resource+0xd/0xb0
release_resource+0x26/0x40
__crash_shrink_memory+0xe5/0x110
crash_shrink_memory+0x12a/0x190
kexec_crash_size_store+0x41/0x80
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x294/0x460
ksys_write+0x6d/0xf0
<snip...>
This happens because __crash_shrink_memory()/kernel/crash_core.c
incorrectly updates the crashk_res resource object even when
crashk_low_res should be updated.
Fix this by ensuring the correct crashkernel resource object is updated
when shrinking crashkernel memory.
Link: https://lkml.kernel.org/r/20251101193741.289252-1-sourabhjain@linux.ibm.com
Fixes: 16c6006af4 ("kexec: enable kexec_crash_size to support two crash kernel regions")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b0c8e6d3d8 ]
The usage pattern for widen_imprecise_scalars() looks as follows:
prev_st = find_prev_entry(env, ...);
queued_st = push_stack(...);
widen_imprecise_scalars(env, prev_st, queued_st);
Where prev_st is an ancestor of the queued_st in the explored states
tree. This ancestor is not guaranteed to have same allocated stack
depth as queued_st. E.g. in the following case:
def main():
for i in 1..2:
foo(i) // same callsite, differnt param
def foo(i):
if i == 1:
use 128 bytes of stack
iterator based loop
Here, for a second 'foo' call prev_st->allocated_stack is 128,
while queued_st->allocated_stack is much smaller.
widen_imprecise_scalars() needs to take this into account and avoid
accessing bpf_verifier_state->frame[*]->stack out of bounds.
Fixes: 2793a8b015 ("bpf: exact states comparison for iterator convergence checks")
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80f0d631dc ]
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Link: https://patch.msgid.link/20251106120132.3639920-1-zilin@seu.edu.cn
Fixes: 02205a6752 ("tracing: Add support for 'field variables'")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4099b98203 ]
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91 ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754 ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable.
Link: https://lore.kernel.org/aMQD9_lxYmphT-up@vova-pc
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4363264111 ]
If uprobe handler changes instruction pointer we still execute single
step) or emulate the original instruction and increment the (new) ip
with its length.
This makes the new instruction pointer bogus and application will
likely crash on illegal instruction execution.
If user decided to take execution elsewhere, it makes little sense
to execute the original instruction, so let's skip it.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b54082c3e ]
sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()
to check if the calling task is allowed to access another task's
robust_list pointer. This check is racy against a concurrent exec() in the
target process.
During exec(), a task may transition from a non-privileged binary to a
privileged one (e.g., setuid binary) and its credentials/memory mappings
may change. If get_robust_list() performs ptrace_may_access() before
this transition, it may erroneously allow access to sensitive information
after the target becomes privileged.
A racy access allows an attacker to exploit a window during which
ptrace_may_access() passes before a target process transitions to a
privileged state via exec().
For example, consider a non-privileged task T that is about to execute a
setuid-root binary. An attacker task A calls get_robust_list(T) while T
is still unprivileged. Since ptrace_may_access() checks permissions
based on current credentials, it succeeds. However, if T begins exec
immediately afterwards, it becomes privileged and may change its memory
mappings. Because get_robust_list() proceeds to access T->robust_list
without synchronizing with exec() it may read user-space pointers from a
now-privileged process.
This violates the intended post-exec access restrictions and could
expose sensitive memory addresses or be used as a primitive in a larger
exploit chain. Consequently, the race can lead to unauthorized
disclosure of information across privilege boundaries and poses a
potential security risk.
Take a read lock on signal->exec_update_lock prior to invoking
ptrace_may_access() and accessing the robust_list/compat_robust_list.
This ensures that the target task's exec state remains stable during the
check, allowing for consistent and synchronized validation of
credentials.
Suggested-by: Jann Horn <jann@thejh.net>
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-fsdevel/1477863998-3298-5-git-send-email-jann@thejh.net/
Link: https://github.com/KSPP/linux/issues/119
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c89513395 ]
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250915032618.1551762-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
