configs: tqma6: mba6: add and use defconfigs with general configurations

Add a common, MMC and SPI defconfigs with the general configurations
and use them in the variant-specific defconfigs.

while at it:

- set BOOTCOMMAND to mmcboot as it is used on majority of other TQ modules
  as the default
- remove DEFAULT_FDT_FILE - The kernel device tree is set at runtime.
- remove CONFIG_CMD_EXT4_WRITE - EXT4 with default features cannot be
  written from U-Boot.
- add CONFIG_FDT_FIXUP_PARTITIONS - This is needed to propagate MTD
  partition setup via devicetree to linux.

Signed-off-by: Paul Gerber <Paul.Gerber@ew.tq-group.com>
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>

configs/tqma6_mba6_common.defconfig

@@ -0,0 +1,78 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_MALLOC_LEN=0x202000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_TARGET_TQMA6=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOOTDELAY=3
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run mmcboot"
+CONFIG_SYS_PBSIZE=532
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=32
+CONFIG_CMD_BOOTZ=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_TEMPERATURE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_ARP_TIMEOUT=200
+CONFIG_USE_ROOTPATH=y
+CONFIG_ROOTPATH="/srv/nfs"
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_USDHC=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHY_ANEG_TIMEOUT=8000
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y

configs/tqma6_mba6_mmc.defconfig

@@ -0,0 +1,3 @@
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_ENV_IS_IN_MMC=y
+# CONFIG_DISPLAY_BOARDINFO is not set

configs/tqma6_mba6_spi.defconfig

@@ -0,0 +1,6 @@
+CONFIG_ENV_OFFSET=0x80000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_TQMA6X_SPI_BOOT=y
+CONFIG_ENV_OFFSET_REDUND=0x90000
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_REDUNDANT=y

configs/tqma6dl_mba6_mmc_defconfig

@@ -1,76 +1,5 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_MALLOC_LEN=0x202000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
+#include <configs/tqma6_mba6_common.defconfig>
+#include <configs/tqma6_mba6_mmc.defconfig>
+
 CONFIG_MX6DL=y
-CONFIG_TARGET_TQMA6=y
 CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
-CONFIG_SYS_PBSIZE=532
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_TEMPERATURE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_ARP_TIMEOUT=200
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_IMX_WATCHDOG=y

configs/tqma6dl_mba6_spi_defconfig

@@ -1,79 +1,5 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_MALLOC_LEN=0x202000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x80000
-CONFIG_ENV_SECT_SIZE=0x10000
+#include <configs/tqma6_mba6_common.defconfig>
+#include <configs/tqma6_mba6_spi.defconfig>
+
 CONFIG_MX6DL=y
-CONFIG_TARGET_TQMA6=y
-CONFIG_TQMA6X_SPI_BOOT=y
 CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
-CONFIG_ENV_OFFSET_REDUND=0x90000
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
-CONFIG_SYS_PBSIZE=532
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_TEMPERATURE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_REDUNDANT=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_ARP_TIMEOUT=200
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_IMX_WATCHDOG=y

configs/tqma6q_mba6_mmc_defconfig

@@ -1,75 +1,5 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_MALLOC_LEN=0x202000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
+#include <configs/tqma6_mba6_common.defconfig>
+#include <configs/tqma6_mba6_mmc.defconfig>
+
 CONFIG_MX6Q=y
-CONFIG_TARGET_TQMA6=y
 CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6q-mba6b"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb"
-CONFIG_SYS_PBSIZE=532
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_TEMPERATURE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_ARP_TIMEOUT=200
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_IMX_WATCHDOG=y

configs/tqma6q_mba6_spi_defconfig

@@ -1,79 +1,5 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_MALLOC_LEN=0x202000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x80000
-CONFIG_ENV_SECT_SIZE=0x10000
+#include <configs/tqma6_mba6_common.defconfig>
+#include <configs/tqma6_mba6_spi.defconfig>
+
 CONFIG_MX6Q=y
-CONFIG_TARGET_TQMA6=y
-CONFIG_TQMA6X_SPI_BOOT=y
 CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6q-mba6b"
-CONFIG_ENV_OFFSET_REDUND=0x90000
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="nxp/imx/imx6q-mba6x.dtb"
-CONFIG_SYS_PBSIZE=532
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_TEMPERATURE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_REDUNDANT=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_ARP_TIMEOUT=200
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_IMX_WATCHDOG=y

configs/tqma6s_mba6_mmc_defconfig

@@ -1,75 +1,5 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_MALLOC_LEN=0x202000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
+#include <configs/tqma6_mba6_common.defconfig>
+#include <configs/tqma6_mba6_mmc.defconfig>
+
 CONFIG_MX6S=y
-CONFIG_TARGET_TQMA6=y
 CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
-CONFIG_SYS_PBSIZE=532
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_TEMPERATURE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_ARP_TIMEOUT=200
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_IMX_WATCHDOG=y

configs/tqma6s_mba6_spi_defconfig

@@ -1,79 +1,5 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_MALLOC_LEN=0x202000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x80000
-CONFIG_ENV_SECT_SIZE=0x10000
+#include <configs/tqma6_mba6_common.defconfig>
+#include <configs/tqma6_mba6_spi.defconfig>
+
 CONFIG_MX6S=y
-CONFIG_TARGET_TQMA6=y
-CONFIG_TQMA6X_SPI_BOOT=y
 CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
-CONFIG_ENV_OFFSET_REDUND=0x90000
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
-CONFIG_SYS_PBSIZE=532
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_TEMPERATURE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_REDUNDANT=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_ARP_TIMEOUT=200
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_THERMAL=y
-CONFIG_IMX_WATCHDOG=y