michael/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

net: Add SYS_FAULT_MII_ADDR to Kconfig

Browse Source 
The support found under SYS_FAULT_ECHO_LINK_DOWN requires that the
SYS_FAULT_MII_ADDR symbol also be set. This wasn't previously found in
Kconfig, so add it now.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
This commit is contained in:
Tom Rini
2025-09-25 14:44:12 -06:00
committed by Jerome Forissier
parent 4cc1fe3f56
commit f822046037
2 changed files with 4 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
README
View File

@@ -1216,9 +1216,6 @@ Note: once the monitor has been relocated, then it will complain if
the default environment is used; a new CRC is computed as soon as you the default environment is used; a new CRC is computed as soon as you
use the "saveenv" command to store a valid environment. use the "saveenv" command to store a valid environment.
- CONFIG_SYS_FAULT_MII_ADDR:
MII address of the PHY to check for the Ethernet link state.
- CONFIG_DISPLAY_BOARDINFO - CONFIG_DISPLAY_BOARDINFO
Display information about the board that U-Boot is running on Display information about the board that U-Boot is running on
when U-Boot starts up. The board function checkboard() is called when U-Boot starts up. The board function checkboard() is called

4
net/Kconfig
View File

@@ -60,6 +60,10 @@ config SYS_FAULT_ECHO_LINK_DOWN
this option is active, then CONFIG_SYS_FAULT_MII_ADDR also needs to this option is active, then CONFIG_SYS_FAULT_MII_ADDR also needs to
be configured. be configured.
config SYS_FAULT_MII_ADDR
hex "MII address of the PHY to check for the Ethernet link state"
depends on SYS_FAULT_ECHO_LINK_DOWN && LED_STATUS_RED_ENABLE
config TFTP_WINDOWSIZE config TFTP_WINDOWSIZE
int "TFTP window size" int "TFTP window size"
default 1 default 1