The devm alloc functions that we have may follow the Linux kernel model
where allocations are (almost always) automatically free()'d. However,
quite often we don't enable, in full U-Boot, the tracking and free()'ing
functionality. This in turn leads to memory leaks because the driver
author expects that since the functions have the same name as in the
Linux Kernel they have the same behavior. In turn we then get
functionally correct commits such as commit 00e1fed93c ("firmware:
ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource") that manually
add these calls. Rather than manually tracking allocations and
implementing free()s, rework things so that we follow expectations by
enabling the DEVRES functionality (outside of xPL phases).
This turns DEVRES from a prompted symbol to a symbol that must be
select'd, and we now remove our non-managed alloc/free functions from
outside of xPL builds.
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
We have a large number of library symbols that should not be prompted
for by the user really but rather selected by the platform (or SoC) as
needed. To start with however, make these depend on !COMPILE_TEST.
Signed-off-by: Tom Rini <trini@konsulko.com>
The generic name 'EFI' would be more useful for common EFI features. At
present it just refers to the EFI app and stub, which is confusing.
Rename it to EFI_CLIENT
Signed-off-by: Simon Glass <sjg@chromium.org>
In [0], Andrew noted a code quality issue in the implementation of
blk_find_first and blk_find_next. This led to the observation that the
logic of these functions was also likely incorrect, and based on a quick
check it seemed the functions were unused outside of test code, which
did not exercise the potential failure case, so we felt they should be
removed. In [1], a test patch which illustrates the failure in sandbox
is provided for reference.
Because a more thorough check agrees that these functions are unused,
they are currently incorrect, and fixed/removable flags on block devices
prior to probe are unreliable, just remove these functions instead of
fixing them. All potential users should have used blk_first_device_err
instead anyway.
CI results at [2].
[0] https://patchwork.ozlabs.org/project/uboot/patch/20250714-blk-uclass-v1-1-d21428c5f762@linaro.org/
[1] https://gist.github.com/gmalysa/b05e73a5c14bc18c5741a0e0e06a2992
[2] https://gitlab.com/gmalysa/lnxdsp-u-boot/-/pipelines/1931210857
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Reviewed-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In order to use SYS_64BIT_LBA with this driver we need for "start" to
also be of type lbaint_t and to then use the correct printf format
characters.
Reviewed-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
The EFI HTTP boot puts the ISO installer image at some location in
memory. Information about this image has to be passed on to the OS
kernel, which is done by adding a persistent memory(pmem) node to the
devicetree(DT) that is passed to the OS. The OS kernel then gets
information about the presence of this ISO image and proceeds with the
installation.
In U-Boot, this ISO image gets mounted as a memory mapped blkmap
device slice, with the 'preserve' attribute. Add a helper function
which iterates through all such slices, and invokes a callback. The
callback adds the pmem node to the DT and removes the corresponding
memory region from the EFI memory map. Invoke this helper function as
part of the DT fixup which happens before booting the OS.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Some blkmap memory mapped devices might have to be relevant even
after U-Boot passes control to the next image as part of the platform
boot. An example of such a mapping would be an OS installer ISO image,
information for which has to be provided to the OS kernel. Use the
'preserve' attribute for such mappings. The code for adding a pmem
node to the device-tree then checks if this attribute is set, and adds
a node only for mappings which have this attribute.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add information about the type of blkmap slices as an attribute in the
corresponding slice structure. Put information in the blkmap slice
structure to identify if it is associated with a memory or linear
mapped device. Which can then be used to take specific action based on
the type of the blkmap slice.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Replace Maximumm with Maximum in Kconfig symbol description, fix a typo.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
The BLK symbol has a few meanings, one of which is that it controls the
driver model portion of a "block device". Rather than having this hidden
symbol be "default y if ..." it should be select'd by the various block
subsystems. Symbols such as PVBLOCK which already select'd BLK are
unchanged".
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
There are no users of the blk_create_device() function outside the uclass.
Let's make it static. This will ensure that new block drivers will use
blk_create_devicef().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
By using blk_create_devicef() instead of blk_create_devicef() the driver
can be simplified and brought into line with other block device drivers.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Johan Jonker <jbx6244@gmail.com>
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
When SPL_FS_LOADER is set to y and FS_LOADER is not enabled, the SPL build
fails with the following errors:
AR spl/boot/built-in.o
LD spl/u-boot-spl
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`fw_get_filesystem_firmware':
/u-boot/drivers/misc/fs_loader.c:162: undefined reference to
`fs_set_blk_dev'
arm-none-linux-gnueabihf-ld.bfd: /home/frh/tdx/src/u-boot/drivers/misc/
fs_loader.c:185: undefined reference to `fs_read'
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`select_fs_dev':
/u-boot/drivers/misc/fs_loader.c:89: undefined reference to
`fs_set_blk_dev_with_part'
make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
make: *** [Makefile:2055: spl/u-boot-spl] Error 2
Fix it by replacing the FS_LOADER with SPL_FS_LOADER in the Makefile, so
the fs.c with the necessary function definitions are compiled.
Fixes: b071a07743 ("drivers: misc: Makefile: Enable fs_loader compilation at SPL Level")
Suggested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
The existing API for these functions is different from the rest of
U-Boot, in that any error code must be obtained from the errno variable
on failure. This variable is part of the C library, so accessing it
outside of the special 'sandbox' shim-functions is not ideal.
Adjust the API to return an error code, to avoid this. Update existing
uses to check for any negative value, rather than just -1.
Signed-off-by: Simon Glass <sjg@chromium.org>
UBI block is an virtual device, that runs on top
of the MTD layer. The blocks are UBI volumes.
Intended to be used in combination with other MTD
drivers.
Despite the fact that it, like mtdblock abstraction,
it used with UCLASS_MTD, they can be used together
on the system without conflicting. For example,
using bcb command:
# Trying to load bcb via mtdblock:
$ bcb load mtd 0 mtd_partition_name
# Trying to load bcb via UBI block:
$ bcb load ubi 1 ubi_volume_name
User always must attach UBI layer (for example, using
ubi_part()) before using UBI block device.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
At this point in the DM migration, all platforms enable DM. BLK requires
DM. Make BLK "def_bool y" in the cases it had been "default y" to make
this clearer. Now remove the symbol requirement from other places as it
is redundant here.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d, reversing
changes made to 2ee6f3a5f7.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This error path should return -EINVAL instead of success.
Fixes: e261fbf347 ("blk: host_dev: Sanity check on the size of host backing file")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
The intent here is to only allow SPL_LEGACY_BLK if !SPL_DM - i.e. that
when driver model is enabled in SPL, legacy block cannot be used.
However this combination is used by about 240 boards, so we cannot
disallow it, at least not yet.
So just drop the condition.
Signed-off-by: Simon Glass <sjg@chromium.org>
Currently bounce buffer support is enabled for all block devices
when available. Add a flag to blk_desc to enable only on demand.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add rkmtd class and drivers to create a virtual block device
to transfer Rockchip boot block data to and from NAND with
block orientated tools like "ums" and "rockusb".
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Prepare a rkmtd UCLASS in use for writing Rockchip boot blocks
in combination with existing userspace tools and rockusb command.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
blk_{read,write}_devnum() are no longer used by anywhere in the
source tree. Drop them.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
get_desc() can be useful outside blk-uclass.c. Let's change it to
an API and make it externally visible.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
At present if a device to map has a block size other than 512,
the blkmap map process just fails. There is no reason why we
can't just use the block size of the mapped device.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Since we are emulating a block device, its size should be multiple
of the configured block size.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow optionally set the logical block size of the host device to
bind in the "host bind" command. If not given, defaults to 512.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
The last user of the NEEDS_MANUAL_RELOC has been removed in commit
26af162ac8 ("arch: m68k: Implement relocation")
Remove now unused NEEDS_MANUAL_RELOC code.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Some devices have limited DMA capabilities and require that the
buffers passed to them fit specific properties. Add new optional
callback which can be used at driver level to indicate whether a
buffer alignment is suitable for the device DMA or not, and
trigger use of generic bounce buffer implementation to help use
of unsuitable buffers at the expense of performance degradation.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Move part_create_block_devices() to blk uclass and unexpose
the function. This can now be internal to the block uclass.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0". However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
