108d9f11ea
Add a minimal generic RK3576 board that only have eMMC, SDMMC and USB OTG enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3576 boards that follow reference board design. eMMC and SD-card boot tested on: - ArmSoM CM5 - ArmSoM Sige5 - FriendlyElec NanoPi M5 - Luckfox Omni3576 - Toybrick TB-RK3576D Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
51 lines
1.4 KiB
Plaintext
51 lines
1.4 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_COUNTER_FREQUENCY=24000000
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3576-generic"
|
|
CONFIG_ROCKCHIP_RK3576=y
|
|
CONFIG_SYS_LOAD_ADDR=0x40c00800
|
|
CONFIG_DEBUG_UART_BASE=0x2AD40000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_DEBUG_UART=y
|
|
# CONFIG_BOOTMETH_VBE is not set
|
|
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-generic.dtb"
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_SPL_MAX_SIZE=0x40000
|
|
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
CONFIG_CMD_MEMINFO=y
|
|
CONFIG_CMD_MEMINFO_MAP=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_MISC=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_ROCKUSB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_RNG=y
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_OF_UPSTREAM is not set
|
|
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_NO_NET=y
|
|
# CONFIG_ADC is not set
|
|
# CONFIG_USB_FUNCTION_FASTBOOT is not set
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SUPPORT_EMMC_RPMB=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_SDMA=y
|
|
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
|
CONFIG_BAUDRATE=1500000
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYS_NS16550_MEM32=y
|
|
CONFIG_SYSRESET_PSCI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_DWC3=y
|
|
CONFIG_USB_DWC3_GENERIC=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_USB_FUNCTION_ROCKUSB=y
|
|
CONFIG_ERRNO_STR=y
|