6d04828b45
Support for using "u-boot,dm-..." rather than "bootph-..." has been deprecated since February 2023. Any platforms using this have had a console message saying to migrate by 2023.07. Go and remove all support here now, for the v2026.01 release. The results of this change that aren't clear from the above are that we still have a checkpatch.pl error message, and document in doc/develop/spl.rst that they have been migrated since 2023. We also change the key2dtsi.py tool to use the correct bootph phase rather than the legacy phase. Signed-off-by: Tom Rini <trini@konsulko.com>
117 lines
2.9 KiB
Plaintext
117 lines
2.9 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_AT91=y
|
|
CONFIG_TEXT_BASE=0x26f00000
|
|
CONFIG_SYS_MALLOC_LEN=0x1000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x40000
|
|
CONFIG_TARGET_SAMA5D29_CURIOSITY=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20044000
|
|
CONFIG_SF_DEFAULT_SPEED=50000000
|
|
CONFIG_ENV_SIZE=0x4000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d29_curiosity"
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_SYS_BOOTM_LEN=0x2000000
|
|
CONFIG_SYS_LOAD_ADDR=0x22000000
|
|
CONFIG_SF_DEFAULT_BUS=2
|
|
CONFIG_DEBUG_UART_BASE=0xf801c000
|
|
CONFIG_DEBUG_UART_CLOCK=82000000
|
|
CONFIG_DEBUG_UART_BOARD_INIT=y
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_SYS_MEMTEST_START=0x20000000
|
|
CONFIG_SYS_MEMTEST_END=0x30000000
|
|
CONFIG_ENV_VARS_UBOOT_CONFIG=y
|
|
# CONFIG_EFI_LOADER is not set
|
|
CONFIG_FIT=y
|
|
# CONFIG_BOOTSTD is not set
|
|
CONFIG_QSPI_BOOT=y
|
|
CONFIG_SD_BOOT=y
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_USE_BOOTARGS=y
|
|
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait"
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
CONFIG_BOOTCOMMAND="fatload mmc 1:1 0x21000000 at91-sama5d29_curiosity.dtb; fatload mmc 1:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
|
|
CONFIG_BOARD_TYPES=y
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_MEMINFO=y
|
|
CONFIG_CMD_MEM_SEARCH=y
|
|
CONFIG_CMD_MX_CYCLIC=y
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_CMD_STRINGS=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_LSBLK=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_SF_TEST=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_CAT=y
|
|
CONFIG_CMD_XXD=y
|
|
CONFIG_CMD_RTC=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_TIMER=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_CMD_MTDPARTS_SPREAD=y
|
|
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
|
|
CONFIG_MTDIDS_DEFAULT="nor0=nor0"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=nor0:256k(bootstrap)ro,1M(u-boot)ro,256k(env)ro,512k(dtb)ro,6M(kernel)ro"
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_IS_IN_FAT=y
|
|
CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
|
|
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_USE_HOSTNAME=y
|
|
CONFIG_HOSTNAME="SAMA5D29"
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_NO_NET=y
|
|
CONFIG_CLK=y
|
|
CONFIG_CLK_AT91=y
|
|
CONFIG_AT91_UTMI=y
|
|
CONFIG_AT91_H32MX=y
|
|
CONFIG_AT91_GENERIC_CLK=y
|
|
CONFIG_ATMEL_PIO4=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_ATMEL=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
|
CONFIG_SPI_FLASH_SST=y
|
|
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
|
CONFIG_SPI_FLASH_MTD=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_AT91PIO4=y
|
|
CONFIG_RESET_AT91=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_EMULATION=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_DEBUG_UART_ANNOUNCE=y
|
|
CONFIG_ATMEL_USART=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_ATMEL_QSPI=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SYSRESET_AT91=y
|
|
CONFIG_TIMER=y
|
|
CONFIG_ATMEL_TCB_TIMER=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_ATMEL_USBA=y
|
|
CONFIG_VIDEO=y
|
|
CONFIG_ATMEL_HLCD=y
|
|
CONFIG_W1=y
|
|
CONFIG_W1_GPIO=y
|
|
CONFIG_W1_EEPROM=y
|
|
CONFIG_W1_EEPROM_DS24XXX=y
|
|
CONFIG_CMD_DHRYSTONE=y
|