michael/u-boot
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Files
next
u-boot/.gitlab-ci-sage-lab.yml
Tom Rini f84a6d94c7 Gitlab sage, Docker: Add snmp and rsync 
Add snmp and rsync to the normal docker image. While these tools are
only required for the lab on sage, I think it's a small enough addition
to be worth always including at this point. A higher level TODO I think
may be to see if we can / should split the resulting container up, or
if there's host tooling we can remove at a later step, after building
all the software we require.

Signed-off-by: Tom Rini <trini@konsulko.com>
2025-12-01 09:17:48 -06:00

211 lines
8.9 KiB
YAML
Raw Permalink Blame History

# Definition for the lab connected to the "sage" host and managed with labgrid
.sage_lab_template: &sage_lab_dfn
stage: sage-lab
rules:
- if: $SAGE_LAB == "1"
when: always
- if: $SAGE_LAB != "1"
when: manual
allow_failure: true
# USB can be unreliable.
retry: 2
dependencies: []
needs: [ "sandbox test.py" ]
tags: [ 'konsulko-sage-labgrid' ]
before_script:
# Clone uboot-test-hooks
- git config --global --add safe.directory "${CI_PROJECT_DIR}"
- git clone --depth=1 https://source.denx.de/u-boot/u-boot-test-hooks /tmp/uboot-test-hooks
- ln -s sage /tmp/uboot-test-hooks/bin/`hostname`
- ln -s sage /tmp/uboot-test-hooks/py/`hostname`
- export LG_ENV="/tmp/uboot-test-hooks/bin/sage/labgrid-sage-env.yaml";
export LG_COORDINATOR=172.17.0.1:20408
# Prepare python environment
- python3 -m venv /tmp/venv;
. /tmp/venv/bin/activate;
pip install -r test/py/requirements.txt -r tools/binman/requirements.txt
-r tools/buildman/requirements.txt -r tools/u_boot_pylib/requirements.txt
labgrid setuptools
# Acquire and turn on the exporter.
- labgrid-client reserve --wait board=${LABGRID_EXPORTER} &&
labgrid-client -p ${LABGRID_EXPORTER} acquire &&
labgrid-client -p ${LABGRID_EXPORTER} power on
# Prepare ssh
- mkdir --mode=0700 ~/.ssh;
printf 'Host sage-exporter-*\n\tUser labgrid\n' > ~/.ssh/config
# If we have TF-A binaries, we need to use them.
- if [[ -d /opt/tf-a/${TEST_PY_BD}${TEST_PY_ID//--id /_} ]]; then
cp /opt/tf-a/${TEST_PY_BD}${TEST_PY_ID//--id /_}/* /tmp/;
elif [[ -d /opt/tf-a/${TEST_PY_BD} ]]; then
cp /opt/tf-a/${TEST_PY_BD}/* /tmp/;
fi;
export BINMAN_INDIRS=/tmp;
script:
- export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}
# Don't stop on non-zero exit codes now, to provide as much chance as
# possible to ensure we don't leave lab resources acquired.
- set +e;
# Sage is 16 threads and has 4 devices attached, so 4 builder threads.
- tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e
--board ${TEST_PY_BD} ${OVERRIDE} -T 4;
RC=`echo $?`;
# Wait for the exporter to have the device ready
- while test `labgrid-client resources |
grep -q ${LABGRID_EXPORTER}/${LG_PLACE}/; echo $?` -ne 0; do sleep 1;
done
# Fingerprint the exporter
- ssh-keyscan ${LABGRID_EXPORTER} > ~/.ssh/known_hosts 2>/dev/null
# If we built, run the tests and save the results.
- export PATH=/tmp/uboot-test-hooks/bin:${PATH};
export PYTHONPATH=/tmp/uboot-test-hooks/py/sage;
test $RC -eq 0 && labgrid-client reserve --wait board=${LG_PLACE} &&
labgrid-client -p ${LG_PLACE} acquire &&
./test/py/test.py -ra --bd ${TEST_PY_BD} ${TEST_PY_ID}
${TEST_PY_EXTRA:-"--capture=tee-sys"}
${TEST_PY_TEST_SPEC:+"-k ${TEST_PY_TEST_SPEC}"}
--build-dir "$UBOOT_TRAVIS_BUILD_DIR"
--junitxml=/tmp/${TEST_PY_BD}/results.xml;
RC=`echo $?`;
cp -v /tmp/${TEST_PY_BD}/*.{html,css,xml} .;
# Release and power off everything.
- labgrid-client -p ${LG_PLACE} power off
- labgrid-client -p ${LG_PLACE} release
- labgrid-client -p ${LABGRID_EXPORTER} ssh sudo poweroff && sleep 15 &&
labgrid-client -p ${LABGRID_EXPORTER} power off
- labgrid-client -p ${LABGRID_EXPORTER} release
- exit $RC
artifacts:
when: always
paths:
- "*.html"
- "*.css"
- results.xml
reports:
junit: results.xml
expire_in: 1 week
Pine64+:
<<: *sage_lab_dfn
variables:
LABGRID_EXPORTER: "sage-exporter-pine64-1"
LG_PLACE: "pine64-1"
TEST_PY_BD: "pine64_plus"
OVERRIDE: "-a CMD_BOOTMENU -a CMD_LOG"
Pine64+ (lwIP):
<<: *sage_lab_dfn
needs: [ "Pine64+" ]
variables:
LABGRID_EXPORTER: "sage-exporter-pine64-1"
LG_PLACE: "pine64-1"
TEST_PY_BD: "pine64_plus"
# Leads to crash on lwIP, needs investigation.
TEST_PY_TEST_SPEC: "not test_net_pxe_boot_config"
OVERRIDE: "-a CMD_BOOTMENU -a CMD_LOG -a NET_LWIP"
SolidRun Hummingboard 2:
<<: *sage_lab_dfn
variables:
LABGRID_EXPORTER: "sage-exporter-hb-1"
LG_PLACE: "hb-1"
TEST_PY_BD: "mx6cuboxi"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG"
SolidRun Hummingboard 2 (lwIP):
<<: *sage_lab_dfn
needs: [ "SolidRun Hummingboard 2" ]
variables:
LABGRID_EXPORTER: "sage-exporter-hb-1"
LG_PLACE: "hb-1"
TEST_PY_BD: "mx6cuboxi"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a NET_LWIP"
Raspberry Pi 4:
<<: *sage_lab_dfn
variables:
LABGRID_EXPORTER: "sage-exporter-rpi4-1"
LG_PLACE: "rpi4-1"
TEST_PY_BD: "rpi_4"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000"
Raspberry Pi 4 (rpi_arm64):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 4" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi4-1"
LG_PLACE: "rpi4-1"
TEST_PY_BD: "rpi_arm64"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000"
Raspberry Pi 4 (rpi_arm64, lwIP):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 4 (rpi_arm64)" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi4-1"
LG_PLACE: "rpi4-1"
TEST_PY_BD: "rpi_arm64"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP"
Raspberry Pi 4 (rpi_4_32b):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 4 (rpi_arm64, lwIP)" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi4-1"
LG_PLACE: "rpi4-1"
TEST_PY_BD: "rpi_4_32b"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000"
Raspberry Pi 4 (rpi_4_32b, lwIP):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 4 (rpi_4_32b)" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi4-1"
LG_PLACE: "rpi4-1"
TEST_PY_BD: "rpi_4_32b"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP"
Raspberry Pi 3:
<<: *sage_lab_dfn
variables:
LABGRID_EXPORTER: "sage-exporter-rpi3-1"
LG_PLACE: "rpi3-1"
TEST_PY_BD: "rpi_3"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000"
Raspberry Pi 3 (rpi_arm64):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 3" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi3-1"
LG_PLACE: "rpi3-1"
TEST_PY_BD: "rpi_arm64"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000"
Raspberry Pi 3 (rpi_arm64, lwIP):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 3 (rpi_arm64)" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi3-1"
LG_PLACE: "rpi3-1"
TEST_PY_BD: "rpi_arm64"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a ~CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP"
Raspberry Pi 3 (rpi_3_32b):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 3 (rpi_arm64, lwIP)" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi3-1"
LG_PLACE: "rpi3-1"
TEST_PY_BD: "rpi_3_32b"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a CMD_TFTPPUT -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000"
Raspberry Pi 3 (rpi_3_32b, lwIP):
<<: *sage_lab_dfn
needs: [ "Raspberry Pi 3 (rpi_3_32b)" ]
variables:
LABGRID_EXPORTER: "sage-exporter-rpi3-1"
LG_PLACE: "rpi3-1"
TEST_PY_BD: "rpi_3_32b"
OVERRIDE: "-a UNIT_TEST -a ~CMD_EFIDEBUG -a CMD_BOOTMENU -a CMD_LOG -a CMD_BOOTEFI_SELFTEST -a FIT -a FIT_SIGNATURE -a FIT_BEST_MATCH -a SYS_BOOTM_LEN=0x4000000 -a BOOTSTAGE -a BOOTSTAGE_STASH -a CMD_BOOTSTAGE -a BOOTSTAGE_STASH_ADDR=0x02400000 -a NET_LWIP"
Reference in New Issue View Git Blame Copy Permalink