We're aiming to reduce the amount of U-Boot-specific and out-of-spec
Device Tree additions.
Those two properties haven't been doing anything for a long time
already, except when read by board files manually. This is still the
case for STM32 boards but those will be migrated in the near future
according to their maintainer. In any case, let's not encourage people
to add either of these properties to new or existing Device Trees and
remove it from the bindings.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This patch series adds support for ZFS listing and load to u-boot.
To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS
Steps to test:
1. After applying the patch, zfs specific commands can be seen
in the boot loader prompt using
UBOOT #help
zfsload- load binary file from a ZFS file system
zfsls - list files in a directory (default /)
2. To list the files in zfs pool, device or partition, execute
zfsls <interface> <dev[:part]> [POOL/@/dir/file]
For example:
UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
3. To read and load a file from an ZFS formatted partition to RAM, execute
zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
For example:
UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
References :
-- ZFS GRUB sources from Solaris GRUB-0.97
-- GRUB Bazaar repository
Jorgen Lundman <lundman at lundman.net> 2012.
eb02d87c75