A few lines of code being guarded by the CONFIG_TFTP_PORT option seems
an unnecessary restriction on the TFTP support provided by a vanilla
U-Boot image. In cases where the TFTP server cannot run as superuser -
and hence cannot run on the well-known port 69 - this quirk incurs a
full reconfiguration and rebuild of the bootloader only in order to
select the appropriate destination port.
Remove the CONFIG_TFTP_PORT option entirely and make the tftpdstp and
tftpsrcp variables always have an effect. Their being unset will mean
that U-Boot behaves the same as if CONFIG_TFTP_PORT was unset. Update
the documentation accordingly. And fix up the single board which was
originally enabling this option.
Signed-off-by: Alvin Šipraga <alvin@pqrs.dk>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
This patch series adds support for ZFS listing and load to u-boot.
To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS
Steps to test:
1. After applying the patch, zfs specific commands can be seen
in the boot loader prompt using
UBOOT #help
zfsload- load binary file from a ZFS file system
zfsls - list files in a directory (default /)
2. To list the files in zfs pool, device or partition, execute
zfsls <interface> <dev[:part]> [POOL/@/dir/file]
For example:
UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
3. To read and load a file from an ZFS formatted partition to RAM, execute
zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
For example:
UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
References :
-- ZFS GRUB sources from Solaris GRUB-0.97
-- GRUB Bazaar repository
Jorgen Lundman <lundman at lundman.net> 2012.
caa2ad6f8c