boards: arm: cc3235sf_launchxl: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/boards_legacy/arm/cc3235sf_launchxl/Kconfig.defconfig

@@ -1,11 +0,0 @@
-# TI CC3235SF LaunchXL board configuration
-
-# Copyright (c) 2019, Texas Instruments Incorporated
-# SPDX-License-Identifier: Apache-2.0
-
-if BOARD_CC3235SF_LAUNCHXL
-
-config BOARD
-	default "cc3235sf_launchxl"
-
-endif # BOARD_CC3235SF_LAUNCHXL

boards/boards_legacy/arm/cc3235sf_launchxl/cc3235sf_launchxl_defconfig

@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-CONFIG_BOARD_CC3235SF_LAUNCHXL=y
-CONFIG_SOC_SERIES_CC32XX=y
-CONFIG_SOC_CC3235SF=y
-CONFIG_BUILD_OUTPUT_HEX=y
-
-
-#enable GPIO driver
-CONFIG_GPIO=y
-
-# enable uart driver
-CONFIG_SERIAL=y
-
-# enable console
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y

boards/ti/cc3235sf_launchxl/Kconfig.cc3235sf_launchxl

@@ -1,8 +1,6 @@
 # TI SimpleLink CC3235SF LaunchXL Board
-
 # Copyright (c) 2019, Texas Instruments Incorporated
 # SPDX-License-Identifier: Apache-2.0
 
 config BOARD_CC3235SF_LAUNCHXL
-	bool "TI CC3235SF LAUNCHXL"
+	select SOC_CC3235SF
-	depends on SOC_CC3235SF

boards/ti/cc3235sf_launchxl/board.yml

@@ -0,0 +1,5 @@
+board:
+  name: cc3235sf_launchxl
+  vendor: Texas Instruments
+  socs:
+  - name: cc3235sf

boards/ti/cc3235sf_launchxl/cc3235sf_launchxl_defconfig

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_BUILD_OUTPUT_HEX=y
+
+# Enable GPIO driver
+CONFIG_GPIO=y
+
+# Enable UART driver
+CONFIG_SERIAL=y
+
+# Enable console
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y

boards/ti/cc3235sf_launchxl/doc/index.rst

@@ -75,7 +75,7 @@ Connections and IOs
 ====================
 
 Peripherals on the CC3235SF LaunchXL are mapped to the following pins in
-the file :zephyr_file:`boards/arm/cc3235sf_launchxl/pinmux.c`.
+the file :zephyr_file:`boards/ti/cc3235sf_launchxl/pinmux.c`.
 
 +------------+-------+-------+
 | Function   | PIN   | GPIO  |
@@ -96,7 +96,7 @@ the file :zephyr_file:`boards/arm/cc3235sf_launchxl/pinmux.c`.
 +------------+-------+-------+
 
 The default configuration can be found in the Kconfig file at
-:zephyr_file:`boards/arm/cc3235sf_launchxl/cc3235sf_launchxl_defconfig`.
+:zephyr_file:`boards/ti/cc3235sf_launchxl/cc3235sf_launchxl_defconfig`.
 
 
 Programming and Debugging
@@ -168,7 +168,7 @@ Prerequisites:
    the one in the Zephyr SDK. If for some reason you wish to continue to use
    your TI OpenOCD installation, you can set the OPENOCD and
    OPENOCD_DEFAULT_PATH variables in
-   :zephyr_file:`boards/arm/cc3220sf_launchxl/board.cmake` to point the build
+   :zephyr_file:`boards/ti/cc3220sf_launchxl/board.cmake` to point the build
    to the paths of the OpenOCD binary and its scripts, before
    including the common openocd.board.cmake file: