boards: arm: actinius_icarus_som_dk: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit is contained in:
Jamie McCrae
2024-02-02 11:38:13 +00:00
committed by Carles Cufi
parent dd0672a64c
commit 486504cf24
23 changed files with 31 additions and 63 deletions

View File

@@ -3,6 +3,4 @@
#
# SPDX-License-Identifier: Apache-2.0
zephyr_library()
add_subdirectory(${ZEPHYR_BASE}/boards/common/actinius actinius_common)

View File

@@ -0,0 +1,7 @@
# Actinius Icarus SoM DK board configuration
# Copyright (c) 2022 Actinius
# SPDX-License-Identifier: Apache-2.0
config BOARD_ACTINIUS_ICARUS_SOM_DK
select SOC_NRF9160_SICA

View File

@@ -3,10 +3,7 @@
# Copyright (c) 2022 Actinius
# SPDX-License-Identifier: Apache-2.0
if BOARD_ACTINIUS_ICARUS_SOM_DK || BOARD_ACTINIUS_ICARUS_SOM_DK_NS
config BOARD
default "actinius_icarus_som_dk"
if BOARD_ACTINIUS_ICARUS_SOM_DK
source "boards/common/actinius/Kconfig"
@@ -25,9 +22,9 @@ DT_CHOSEN_Z_CODE_PARTITION := zephyr,code-partition
config FLASH_LOAD_SIZE
default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION))
depends on BOARD_ACTINIUS_ICARUS_SOM_DK && TRUSTED_EXECUTION_SECURE
depends on BOARD_ACTINIUS_ICARUS_SOM_DK_NRF9160 && TRUSTED_EXECUTION_SECURE
if BOARD_ACTINIUS_ICARUS_SOM_DK_NS
if BOARD_ACTINIUS_ICARUS_SOM_DK_NRF9160_NS
config FLASH_LOAD_OFFSET
default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_PARTITION))
@@ -35,6 +32,6 @@ config FLASH_LOAD_OFFSET
config FLASH_LOAD_SIZE
default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION))
endif # BOARD_ACTINIUS_ICARUS_SOM_DK_NS
endif # BOARD_ACTINIUS_ICARUS_SOM_DK_NRF9160_NS
endif # BOARD_ACTINIUS_ICARUS_SOM_DK || BOARD_ACTINIUS_ICARUS_SOM_DK_NS
endif # BOARD_ACTINIUS_ICARUS_SOM_DK

View File

@@ -1,9 +1,5 @@
# SPDX-License-Identifier: Apache-2.0
CONFIG_SOC_SERIES_NRF91X=y
CONFIG_SOC_NRF9160_SICA=y
CONFIG_BOARD_ACTINIUS_ICARUS_SOM_DK=y
# Enable MPU
CONFIG_ARM_MPU=y
@@ -13,12 +9,12 @@ CONFIG_HW_STACK_PROTECTION=y
# Enable TrustZone-M
CONFIG_ARM_TRUSTZONE_M=y
# enable GPIO
# Enable GPIO
CONFIG_GPIO=y
# Enable uart driver
# Enable UART driver
CONFIG_SERIAL=y
# enable console
# Enable console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

View File

@@ -1,4 +1,4 @@
identifier: actinius_icarus_som_dk
identifier: actinius_icarus_som_dk/nrf9160
name: Actinius Icarus SoM DK
type: mcu
arch: arm

View File

@@ -1,4 +1,4 @@
identifier: actinius_icarus_som_dk_ns
identifier: actinius_icarus_som_dk/nrf9160/ns
name: Actinius Icarus SoM DK Non-Secure
type: mcu
arch: arm

View File

@@ -0,0 +1,4 @@
# SPDX-License-Identifier: Apache-2.0
# This board implies building Non-Secure firmware
CONFIG_TRUSTED_EXECUTION_NONSECURE=y

View File

@@ -0,0 +1,5 @@
board:
name: actinius_icarus_som_dk
vendor: Actinius
variants:
- name: 'ns'

View File

Before

Width:  |  Height:  |  Size: 84 KiB

After

Width:  |  Height:  |  Size: 84 KiB

View File

@@ -210,7 +210,7 @@ Building Secure/Non-Secure Zephyr applications
The process requires the following steps:
1. Build the Secure Zephyr application using ``-DBOARD=actinius_icarus_som_dk``.
2. Build the Non-Secure Zephyr application using ``-DBOARD=actinius_icarus_som_dk_ns``.
2. Build the Non-Secure Zephyr application using ``-DBOARD=actinius_icarus_som_dk/ns``.
3. Merge the two binaries together.
If you are using Segger Embedded Studio v4.18 or later, the two binaries are built, merged, and

View File

@@ -1,14 +0,0 @@
# Actinius Icarus SoM DK board configuration
# Copyright (c) 2022 Actinius
# SPDX-License-Identifier: Apache-2.0
if SOC_NRF9160_SICA
config BOARD_ACTINIUS_ICARUS_SOM_DK
bool "Actinius Icarus SoM DK"
config BOARD_ACTINIUS_ICARUS_SOM_DK_NS
bool "Actinius Icarus SoM DK Non-Secure"
endif # SOC_NRF9160_SICA

View File

@@ -1,27 +0,0 @@
# SPDX-License-Identifier: Apache-2.0
CONFIG_SOC_SERIES_NRF91X=y
CONFIG_SOC_NRF9160_SICA=y
CONFIG_BOARD_ACTINIUS_ICARUS_SOM_DK_NS=y
# Enable MPU
CONFIG_ARM_MPU=y
# Enable hardware stack protection
CONFIG_HW_STACK_PROTECTION=y
# Enable TrustZone-M
CONFIG_ARM_TRUSTZONE_M=y
# This Board implies building Non-Secure firmware
CONFIG_TRUSTED_EXECUTION_NONSECURE=y
# enable GPIO
CONFIG_GPIO=y
# Enable uart driver
CONFIG_SERIAL=y
# enable console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

View File

@@ -1,5 +1,7 @@
board:
name: xiao_ble
vendor: Seeed Studio
socs:
- name: nrf52840
variants:
- name: 'sense'