boards: arm: ubx_bmd330eval_nrf52810: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/boards_legacy/arm/ubx_bmd330eval_nrf52810/Kconfig.defconfig

@@ -1,11 +0,0 @@
-# BMD-330-EVAL board configuration
-
-# Copyright (c) 2021 u-blox AG
-# SPDX-License-Identifier: Apache-2.0
-
-if BOARD_UBX_BMD330EVAL_NRF52810
-
-config BOARD
-	default "ubx_bmd330eval_nrf52810"
-
-endif # BOARD_UBX_BMD330EVAL_NRF52810

boards/ublox/ubx_bmd330eval/Kconfig

@@ -7,7 +7,7 @@ config BOARD_ENABLE_DCDC
 	bool "DCDC mode"
 	select SOC_DCDC_NRF52X
 	default y
-	depends on BOARD_UBX_BMD330EVAL_NRF52810
+	depends on BOARD_UBX_BMD330EVAL
 
 # BT_CTLR depends on BT. When BT is enabled we should default to also
 # enabling the controller.

boards/ublox/ubx_bmd330eval/Kconfig.defconfig

@@ -3,6 +3,6 @@
 # Copyright (c) 2021 u-blox AG
 # SPDX-License-Identifier: Apache-2.0
 
-config BOARD_UBX_BMD330EVAL_NRF52810
-	bool "u-blox BMD-330-EVAL"
-	depends on SOC_NRF52810_QFAA
+if BOARD_UBX_BMD330EVAL
+
+endif # BOARD_UBX_BMD330EVAL

boards/ublox/ubx_bmd330eval/Kconfig.ubx_bmd330eval

@@ -0,0 +1,9 @@
+# BMD-330-EVAL board configuration
+
+# Copyright (c) 2021 u-blox AG
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_UBX_BMD330EVAL
+	bool
+	default y
+	select SOC_NRF52810_QFAA

boards/ublox/ubx_bmd330eval/board.yml

@@ -0,0 +1,5 @@
+board:
+  name: ubx_bmd330eval
+  vendor: U-blox
+  socs:
+  - name: nrf52810

boards/ublox/ubx_bmd330eval/doc/index.rst

@@ -355,7 +355,7 @@ Then build and flash the application in the usual way.
 
 .. zephyr-app-commands::
 	:zephyr-app: samples/hello_world
-	:board: ubx_bmd330eval_nrf52810
+	:board: ubx_bmd330eval/nrf52810
 	:goals: build flash
 
 Debugging
@@ -378,7 +378,7 @@ There are 2 samples that allow you to test that the buttons
 
 You can build and flash the examples to make sure Zephyr is
 running correctly on your board. The button and LED definitions
-can be found in :zephyr_file:`boards/arm/ubx_bmd330eval_nrf52810/ubx_bmd330eval_nrf52810.dts`.
+can be found in :zephyr_file:`boards/ublox/ubx_bmd330eval/ubx_bmd330eval_nrf52810.dts`.
 
 References
 **********

boards/ublox/ubx_bmd330eval/ubx_bmd330eval.yaml

@@ -1,4 +1,4 @@
-identifier: ubx_bmd330eval_nrf52810
+identifier: ubx_bmd330eval/nrf52810
 name: UBX_BMD330EVAL_NRF52810
 type: mcu
 arch: arm

boards/ublox/ubx_bmd330eval/ubx_bmd330eval_nrf52810_defconfig

@@ -3,10 +3,6 @@
 # Copyright (c) 2021 u-blox AG
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_SOC_SERIES_NRF52X=y
-CONFIG_SOC_NRF52810_QFAA=y
-CONFIG_BOARD_UBX_BMD330EVAL_NRF52810=y
-
 # Enable MPU
 CONFIG_ARM_MPU=y