boards: arc: em_starterkit: Convert to v2

Converts the board to hwmv2, documentation for this board needs to
be vastly updated

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/boards_legacy/arc/em_starterkit/CMakeLists.txt

@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-zephyr_sources(pmodmux.c)
-zephyr_sources_ifdef(CONFIG_ARC_MPU_ENABLE arc_mpu_regions.c)

boards/boards_legacy/arc/em_starterkit/Kconfig

@@ -1,17 +0,0 @@
-# DesignWare ARC EM Starter Kit board configuration options
-
-# Copyright (c) 2017 Synopsys, Inc. All rights reserved.
-# SPDX-License-Identifier: Apache-2.0
-
-choice
-	prompt "Board Firmware Version"
-	default BOARD_EM_STARTERKIT_R23
-	depends on BOARD_EM_STARTERKIT
-
-	config BOARD_EM_STARTERKIT_R22
-		bool "2.2"
-
-	config BOARD_EM_STARTERKIT_R23
-		bool "2.3"
-
-endchoice

boards/boards_legacy/arc/em_starterkit/em_starterkit_em11d_defconfig

@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-CONFIG_SOC_EMSK=y
-CONFIG_SOC_EMSK_EM11D=y
-CONFIG_BOARD_EM_STARTERKIT=y
-CONFIG_BOARD_EM_STARTERKIT_R23=y
-CONFIG_XIP=n
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
-CONFIG_BUILD_NO_GAP_FILL=y
-CONFIG_BUILD_OUTPUT_BIN=n
-CONFIG_ARCV2_INTERRUPT_UNIT=y
-CONFIG_ARCV2_TIMER=y
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_GPIO=y

boards/boards_legacy/arc/em_starterkit/em_starterkit_em7d_defconfig

@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-CONFIG_SOC_EMSK=y
-CONFIG_SOC_EMSK_EM7D=y
-CONFIG_BOARD_EM_STARTERKIT=y
-CONFIG_BOARD_EM_STARTERKIT_R23=y
-CONFIG_XIP=n
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
-CONFIG_BUILD_NO_GAP_FILL=y
-CONFIG_BUILD_OUTPUT_BIN=n
-CONFIG_ARCV2_INTERRUPT_UNIT=y
-CONFIG_ARCV2_TIMER=y
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_GPIO=y
-CONFIG_ARC_MPU_ENABLE=y
-CONFIG_ARC_HAS_SECURE=y
-CONFIG_TRUSTED_EXECUTION_SECURE=y
-CONFIG_INIT_ARCH_HW_AT_BOOT=y

boards/boards_legacy/arc/em_starterkit/em_starterkit_em7d_v22_defconfig

@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-CONFIG_SOC_EMSK=y
-CONFIG_SOC_EMSK_EM7D=y
-CONFIG_BOARD_EM_STARTERKIT=y
-CONFIG_BOARD_EM_STARTERKIT_R22=y
-CONFIG_XIP=n
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
-CONFIG_BUILD_NO_GAP_FILL=y
-CONFIG_BUILD_OUTPUT_BIN=n
-CONFIG_ARCV2_INTERRUPT_UNIT=y
-CONFIG_ARCV2_TIMER=y
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_GPIO=y
-CONFIG_ARC_MPU_ENABLE=y

boards/synopsys/em_starterkit/CMakeLists.txt

@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: Apache-2.0
+
+if((CONFIG_BOARD_EM_STARTERKIT_EMSK_EM9D OR CONFIG_BOARD_EM_STARTERKIT_EMSK_EM11D) AND "${BOARD_REVISION}" STREQUAL "2.2")
+  message(FATAL_ERROR "Board revision 2.2 is not supported for this SoC")
+endif()
+
+zephyr_sources(pmodmux.c)
+zephyr_sources_ifdef(CONFIG_ARC_MPU_ENABLE arc_mpu_regions.c)

boards/synopsys/em_starterkit/Kconfig.defconfig

@@ -2,9 +2,6 @@
 
 if BOARD_EM_STARTERKIT
 
-config BOARD
-	default "em_starterkit"
-
 if I2C_DW
 
 config I2C_DW_CLOCK_SPEED

boards/synopsys/em_starterkit/Kconfig.em_starterkit

@@ -4,8 +4,10 @@
 # SPDX-License-Identifier: Apache-2.0
 
 config BOARD_EM_STARTERKIT
-	bool "ARC EM Starter Kit"
+	select SOC_EMSK
-	depends on SOC_EMSK
+	select SOC_EMSK_EM7D if BOARD_EM_STARTERKIT_EMSK_EM7D
+	select SOC_EMSK_EM9D if BOARD_EM_STARTERKIT_EMSK_EM9D
+	select SOC_EMSK_EM11D if BOARD_EM_STARTERKIT_EMSK_EM11D
 	help
 	  The DesignWare ARC EM Starter Kit board is a board
 	  that can host up to 3 different SOC FPGA bit files.

boards/synopsys/em_starterkit/board.yml

@@ -0,0 +1,13 @@
+board:
+  name: em_starterkit
+  vendor: Synopsys
+  socs:
+  - name: emsk_em7d
+  - name: emsk_em9d
+  - name: emsk_em11d
+  revision:
+    format: major.minor.patch
+    default: "2.3"
+    revisions:
+    - name: "2.2"
+    - name: "2.3"

boards/synopsys/em_starterkit/doc/index.rst

@@ -26,18 +26,18 @@ See also this URL for details about the board:
 The latest version of EM Starter Kit is 2.3, developer can upgrade from
 2.0/2.1/2.2 to 2.3 using latest firmware.
 The default configuration for EM Starter Kit boards can be found in
-:zephyr_file:`boards/arc/em_starterkit/em_starterkit_defconfig`.
+:zephyr_file:`boards/synopsys/em_starterkit/em_starterkit_defconfig`.
 
 The default SoC for this board supported in Zephyr is the EM9D.
 This configuration is a Harvard Architecture, with a separate
 instruction bus and data bus. Instruction memory is called ICCM
 and data memory is called DCCM. The configuration file for EM9D
-is found in :zephyr_file:`soc/arc/snps_emsk/Kconfig.defconfig.em9d`.
+is found in :zephyr_file:`soc/synopsys/snps_emsk/Kconfig.defconfig.em9d`.
 
 If you have a larger program, you can select the EM7D or EM11D, which gives
 access to 128KB DRAM with i-cache and d-cache. The configuration file for EM7D
-is found in :zephyr_file:`soc/arc/snps_emsk/Kconfig.defconfig.em7d` and EM11D is
+is found in :zephyr_file:`soc/synopsys/snps_emsk/Kconfig.defconfig.em7d` and EM11D is
-found in :zephyr_file:`soc/arc/snps_emsk/Kconfig.defconfig.em11d`.
+found in :zephyr_file:`soc/synopsys/snps_emsk/Kconfig.defconfig.em11d`.
 
 
 Hardware
@@ -65,19 +65,6 @@ The EM Starter Kit has different versions, such as 1.0, 1.1, 2.0, 2.1,
 2.2 and 2.3.
 In Zephyr, only firmware versions 2.2 and 2.3 are supported.
 
-* For EM Starter Kit 2.2, EM7D, EM9D and EM11D core configurations are supported.
-
-  * Use :kconfig:option:`CONFIG_BOARD_EM_STARTERKIT_R22` to select 2.2 version.
-  * Use :kconfig:option:`CONFIG_SOC_EMSK_EM7D`, :kconfig:option:`CONFIG_SOC_EMSK_EM9D` or
-    :kconfig:option:`CONFIG_SOC_EMSK_EM11D` to select EM7D or EM9D or EM11D.
-
-* For EM Starter Kit 2.3, EM7D, EM9D and EM11D core configurations are
-  supported.
-
-  * Use :kconfig:option:`CONFIG_BOARD_EM_STARTERKIT_R23` to select 2.3 version.
-  * Use :kconfig:option:`CONFIG_SOC_EMSK_EM7D`, :kconfig:option:`CONFIG_SOC_EMSK_EM9D` or
-    :kconfig:option:`CONFIG_SOC_EMSK_EM11D` to select EM7D or EM9D or EM11D.
-
 Supported Features
 ==================
 

boards/synopsys/em_starterkit/em_starterkit_defconfig

@@ -1,9 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_SOC_EMSK=y
-CONFIG_SOC_EMSK_EM9D=y
-CONFIG_BOARD_EM_STARTERKIT=y
-CONFIG_BOARD_EM_STARTERKIT_R23=y
 CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
 CONFIG_XIP=n
 CONFIG_BUILD_NO_GAP_FILL=y

boards/synopsys/em_starterkit/em_starterkit_emsk_em11d.dts

@@ -19,7 +19,6 @@
 		uart-0 = &uart0;
 		uart-1 = &uart1;
 		uart-2 = &uart2;
-		spi-flash0 = &w25q128bv;
 	};
 
 	chosen {

boards/synopsys/em_starterkit/em_starterkit_emsk_em11d.yaml

@@ -1,4 +1,4 @@
-identifier: em_starterkit_em11d
+identifier: em_starterkit/emsk_em11d
 name: EM Starterkit EM11D
 type: mcu
 arch: arc

boards/synopsys/em_starterkit/em_starterkit_emsk_em7d.dts

@@ -0,0 +1,5 @@
+/*
+ * Copyright (c) 2018, Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */

boards/synopsys/em_starterkit/em_starterkit_emsk_em7d.yaml

@@ -1,4 +1,4 @@
-identifier: em_starterkit_em7d
+identifier: em_starterkit/emsk_em7d
 name: EM Starterkit EM7D
 type: mcu
 arch: arc

boards/synopsys/em_starterkit/em_starterkit_emsk_em7d_2_2.yaml

@@ -1,5 +1,5 @@
-identifier: em_starterkit_em7d_v22
+identifier: em_starterkit@2.2/emsk_em7d
-name: EM Starterkit V22 EM7D
+name: EM Starterkit EM7D
 type: mcu
 arch: arc
 toolchain:

boards/synopsys/em_starterkit/em_starterkit_emsk_em7d_2_3_defconfig

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_ARC_HAS_SECURE=y
+CONFIG_TRUSTED_EXECUTION_SECURE=y
+CONFIG_INIT_ARCH_HW_AT_BOOT=y

boards/synopsys/em_starterkit/em_starterkit_emsk_em7d_defconfig

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_ARC_MPU_ENABLE=y

boards/synopsys/em_starterkit/em_starterkit_emsk_em9d.dts

@@ -19,7 +19,6 @@
 		uart-0 = &uart0;
 		uart-1 = &uart1;
 		uart-2 = &uart2;
-		spi-flash0 = &w25q128bv;
 	};
 
 	chosen {

boards/synopsys/em_starterkit/em_starterkit_emsk_em9d.yaml

@@ -1,4 +1,4 @@
-identifier: em_starterkit
+identifier: em_starterkit/emsk_em9d
 name: EM Starterkit
 type: mcu
 arch: arc

boards/synopsys/em_starterkit/em_starterkit_r23.dtsi

@@ -5,6 +5,10 @@
  */
 
 / {
+	aliases {
+		spi-flash0 = &w25q128bv;
+	};
+
 	soc {
 		i2c@f0004000 {
 			interrupts = <25 1>;

soc/synopsys/emsk/Kconfig.defconfig.em11d

@@ -14,8 +14,8 @@ config NUM_IRQ_PRIO_LEVELS
 
 config NUM_IRQS
 	# must be > the highest interrupt number used
-	default 38 if BOARD_EM_STARTERKIT_R23
+	default 38 if "$(BOARD_REVISION)" = "2.3"
-	default 36 if BOARD_EM_STARTERKIT_R22
+	default 36 if "$(BOARD_REVISION)" = "2.2"
 
 config RGF_NUM_BANKS
 	default 2

soc/synopsys/emsk/Kconfig.defconfig.em7d

@@ -14,26 +14,26 @@ config NUM_IRQ_PRIO_LEVELS
 
 config NUM_IRQS
 	# must be > the highest interrupt number used
-	default 38 if BOARD_EM_STARTERKIT_R23
+	default 38 if "$(BOARD_REVISION)" = "2.3"
-	default 36 if BOARD_EM_STARTERKIT_R22
+	default 36 if "$(BOARD_REVISION)" = "2.2"
 
 config ARC_MPU_VER
-	default 4 if BOARD_EM_STARTERKIT_R23
+	default 4 if "$(BOARD_REVISION)" = "2.3"
-	default 2 if BOARD_EM_STARTERKIT_R22
+	default 2 if "$(BOARD_REVISION)" = "2.2"
 
 config RGF_NUM_BANKS
 	default 1
 
 config SYS_CLOCK_HW_CYCLES_PER_SEC
-	default 25000000 if BOARD_EM_STARTERKIT_R23
+	default 25000000 if "$(BOARD_REVISION)" = "2.3"
-	default 30000000 if BOARD_EM_STARTERKIT_R22
+	default 30000000 if "$(BOARD_REVISION)" = "2.2"
 
 config HARVARD
 	default y
 
 config ARC_FIRQ
-	default n if BOARD_EM_STARTERKIT_R23
+	default n if "$(BOARD_REVISION)" = "2.3"
-	default y if BOARD_EM_STARTERKIT_R22
+	default y if "$(BOARD_REVISION)" = "2.2"
 
 config CACHE_MANAGEMENT
 	default y

soc/synopsys/emsk/Kconfig.defconfig.em9d

@@ -14,8 +14,8 @@ config NUM_IRQ_PRIO_LEVELS
 
 config NUM_IRQS
 	# must be > the highest interrupt number used
-	default 38 if BOARD_EM_STARTERKIT_R23
+	default 38 if "$(BOARD_REVISION)" = "2.3"
-	default 36 if BOARD_EM_STARTERKIT_R22
+	default 36 if "$(BOARD_REVISION)" = "2.2"
 
 config RGF_NUM_BANKS
 	default 2