michael/zephyr
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
collab-rust
zephyr/drivers/input
History
Farah Fliss ad254b06c8 drivers: input: gt911: Add support for multitouch events 
The gt911 can recognize up to 5 touch points at a time.
Add code to support these multi-touch events.

Signed-off-by: Farah Fliss <farah.fliss@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
2024-08-19 15:25:51 -04:00
..
CMakeLists.txt
drivers: input: sbus remote controller support
2024-06-06 15:56:38 -05:00
input_adc_keys.c
drivers: input: Fix uninitialized closest_mv variable warning
2024-03-07 21:37:40 +00:00
input_analog_axis_settings.c
input: analog_axis: rework deadzone calibration code
2024-03-26 11:10:10 -04:00
input_analog_axis.c
input: analog_axis: add output inversion
2024-07-27 20:47:18 +03:00
input_cap1203.c
drivers: gpio: use gpio_is_ready_dt helper function
2023-08-28 08:48:35 -05:00
input_cf1133.c
drivers: input: add cf1133 controller touchscreen
2024-03-26 09:24:43 +00:00
input_chsc6x.c
drivers: input: CHSC6X Driver
2024-04-08 09:28:36 -04:00
input_cst816s.c
drivers: input: cst816s: add cst816d support
2024-08-06 09:19:49 +01:00
input_esp32_touch_sensor.c
driver: input: espressif touch_sensor
2023-12-11 18:31:38 +01:00
input_ft5336.c
Driver Input: FT5336 reports touch pressed on no touches
2024-03-13 11:39:19 -05:00
input_gpio_kbd_matrix.c
input: gpio_kbd_matrix: use edge-to-active interrupt
2023-12-18 12:25:19 +01:00
input_gpio_keys.c
fix: initialize gpio_keys input from pin state
2024-08-09 17:58:16 +01:00
input_gpio_qdec.c
input: gpio_qdec: add power management support
2024-02-02 12:43:12 +01:00
input_gt911.c
drivers: input: gt911: Add support for multitouch events
2024-08-19 15:25:51 -04:00
input_ite_it8xxx2_kbd.c
drivers/input: it8xxx2: Add critical section to prevent race conditions
2024-07-01 09:04:14 -04:00
input_kbd_matrix.c
input: kbd_matrix: define PRIkbdrow coherently
2024-03-12 19:28:40 -04:00
input_npcx_kbd.c
input: npcx_kbd: setup the interrupt to falling edge only
2023-12-20 18:07:43 +00:00
input_pat912x.c
input: pat912x: fix build with default cpi setting
2024-03-14 09:47:36 +00:00
input_paw32xx.c
input: paw32xx: only reschedule the handler if motion is asserted
2024-07-27 15:17:38 +03:00
input_pinnacle.c
input: pinnacle: fix return value check for WAIT_FOR
2024-06-27 15:16:05 -04:00
input_pmw3610.c
input: pmw3610: run the whole init with spi clock on
2024-03-20 09:02:50 +01:00
input_sbus.c
drivers: input: sbus remote controller support
2024-06-06 15:56:38 -05:00
input_sdl_touch_bottom.c
input SDL: Split in top and bottom
2023-07-06 16:04:15 +02:00
input_sdl_touch_bottom.h
input SDL: Split in top and bottom
2023-07-06 16:04:15 +02:00
input_sdl_touch.c
input SDL: Split in top and bottom
2023-07-06 16:04:15 +02:00
input_stmpe811.c
drivers: input: add driver for stmpe811 i2c touch controller
2023-09-22 09:29:56 +02:00
input_xec_kbd.c
input: xec: use the generic keyboard code
2024-03-12 19:30:09 -04:00
input_xpt2046.c
drivers: input: add few missing gpio_add_callback return check
2023-07-19 09:18:38 +00:00
Kconfig
drivers: input: sbus remote controller support
2024-06-06 15:56:38 -05:00
Kconfig.adc_keys
drivers: input: Implement driver for ADC keys
2024-02-26 11:35:19 +00:00
Kconfig.analog_axis
sensor: convert ADC depends on to select
2024-05-16 13:31:32 +02:00
Kconfig.cap1203
input: convert cap1203 from kscan
2023-07-25 11:25:51 +02:00
Kconfig.cf1133
drivers: input: add cf1133 controller touchscreen
2024-03-26 09:24:43 +00:00
Kconfig.chsc6x
drivers: input: CHSC6X Driver
2024-04-08 09:28:36 -04:00
Kconfig.cst816s
drivers: input: cst816s: read the gesture-ID register
2024-08-01 09:14:19 +01:00
Kconfig.esp32
driver: input: espressif touch_sensor
2023-12-11 18:31:38 +01:00
Kconfig.evdev
drivers: input: depend on multithreading on drivers using a thread
2024-01-09 11:27:44 +00:00
Kconfig.ft5336
drivers: input: ft5336: Add support for reset GPIO and FT3267 IC
2023-07-25 09:08:59 +02:00
Kconfig.gpio_kbd_matrix
input: add a gpio based keyboard matrix driver
2023-11-15 11:41:25 +01:00
Kconfig.gpio_keys
drivers: input: drop the zephyr,gpio-keys binding
2023-08-07 11:26:26 +02:00
Kconfig.gpio_qdec
input: add a gpio qdec input driver
2023-06-22 10:46:15 +02:00
Kconfig.gt911
drivers: input: gt911: Add support for multitouch events
2024-08-19 15:25:51 -04:00
Kconfig.it8xxx2
drivers: input: depend on multithreading on drivers using a thread
2024-01-09 11:27:44 +00:00
Kconfig.kbd_matrix
drivers: input: depend on multithreading on drivers using a thread
2024-01-09 11:27:44 +00:00
Kconfig.npcx
drivers: input: depend on multithreading on drivers using a thread
2024-01-09 11:27:44 +00:00
Kconfig.pat912x
input: add a pat912x driver
2024-02-29 11:53:20 +00:00
Kconfig.paw32xx
input: add a paw32xx driver
2024-04-23 22:13:51 +00:00
Kconfig.pinnacle
drivers: input: pinnacle: add driver for trackpad
2024-04-04 09:46:06 +01:00
Kconfig.pmw3610
input: add a pmw3610 driver
2024-03-06 13:34:16 +01:00
Kconfig.sbus
everywhere: replace double words
2024-06-22 05:40:22 -04:00
Kconfig.sdl
input: convert the kscan_sdl driver from kscan to input
2023-04-11 09:34:23 +02:00
Kconfig.stmpe811
drivers: input: add driver for stmpe811 i2c touch controller
2023-09-22 09:29:56 +02:00
Kconfig.xec
input: xec: use the generic keyboard code
2024-03-12 19:30:09 -04:00
Kconfig.xpt2046
input: convert xpt2046 from kscan
2023-06-27 12:17:06 +00:00
linux_evdev_bottom.c
input: add a linux-evdev device
2023-12-18 12:23:59 +01:00
linux_evdev_bottom.h
input: add a linux-evdev device
2023-12-18 12:23:59 +01:00
linux_evdev.c
input: use K_KERNEL_STACK_SIZEOF to set the thread stack size
2023-12-23 09:59:28 +00:00