b43382c685
correct flash_config.c file for different flash varient fix spelling error across board files update boards/deprecated.cmake to help older release support Signed-off-by: Tarang Patel <tarang3399.patel@gmail.com>
133 lines
4.4 KiB
ReStructuredText
133 lines
4.4 KiB
ReStructuredText
.. zephyr:board:: ubx_evk_iris_w1
|
|
|
|
Overview
|
|
********
|
|
|
|
The EVK-IRIS-W10x evaluation kit enables stand-alone use of the IRIS-W10 series module. This guide
|
|
provides details about the hardware functionality of the EVK-IRIS-W10 board and includes setup
|
|
instructions for starting development.
|
|
|
|
All pins and interfaces supported on IRIS-W10 series modules are easily accessible from the
|
|
evaluation board. Simple USB connections serve as the physical interfaces for power, programming
|
|
COM ports, debugging, and USB peripheral connectors. Additionally, the board features other
|
|
interfaces like Ethernet RJ45 and an SDIO header. The EVK-IRIS-W10 board is equipped with a Reset
|
|
button, Boot button, and two user-configurable buttons. Current sense resistors are incorporated for
|
|
accurate current measurement within the module.
|
|
|
|
For flexible use, GPIO signals are accessible through headers and are complemented by four
|
|
mikroBUS™ standard slots for convenient utilization of Click boards™. Each Click board can be
|
|
seamlessly plugged into an available mikroBUS™ slot to facilitate effortless hardware expansion with
|
|
a variety of standardized compact add-on boards. Click boards are designed to accommodate a
|
|
diverse range of electronic modules, including sensors, transceivers, displays, encoders, motor
|
|
drivers, connection ports, and more. For further information about the Click boards, visit the MIKROE
|
|
website.
|
|
|
|
Hardware
|
|
********
|
|
|
|
- 260 MHz ARM Cortex-M33, tri-radio cores for Wi-Fi 6 + BLE 5.3 + 802.15.4
|
|
- 1.2 MB on-chip SRAM
|
|
- EVK-IRIS-W101 evaluation board with IRIS-W101 module. Dual-band PCB antenna for WLAN
|
|
with 100 mm coaxial cable and U.FL connector
|
|
- EVK-IRIS-W106 evaluation board with IRIS-W106 module. Dual-band integrated PCB trace
|
|
antenna (external antenna not supplied)
|
|
|
|
|
|
Flash Memory Configuration
|
|
==========================
|
|
|
|
The IRIS-W1 board uses different flash vendors depending on revision:
|
|
|
|
- ``@macronix``: Module build up to 2023 week 45
|
|
- ``@fidelix``: Module build 2023 week 46 (2346) onward
|
|
|
|
To build for a specific flash version:
|
|
|
|
.. code-block:: bash
|
|
|
|
west build -b ubx_evk_iris_w1@macronix
|
|
west build -b ubx_evk_iris_w1@fidelix
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
.. zephyr:board-supported-hw::
|
|
|
|
Basic functionality like UART (default on FC3), GPIOs (I²C, SPI), and the on-board RGB LEDs is supported.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
.. zephyr:board-supported-runners::
|
|
|
|
|
|
Configuring a Debug Probe
|
|
=========================
|
|
|
|
A debug probe is used for both flashing and debugging the board. This board is
|
|
configured by default to use the J-Link firmware.
|
|
|
|
Configuring a Console
|
|
=====================
|
|
|
|
Connect a USB cable from your PC to USB3, and use the serial terminal of your choice
|
|
(minicom, PuTTY, etc.) with the following settings:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
Flashing
|
|
========
|
|
|
|
Here is an example for the ``hello_world`` application.
|
|
|
|
Open a serial terminal, reset the board (press the RESET button), and you should
|
|
see the following message in the terminal:
|
|
|
|
.. code-block:: console
|
|
|
|
**** Booting Zephyr OS build v4.1.0-2794-g6463c68bc394 ****
|
|
Hello World ! ubx_evk_iris_w1/rw612
|
|
|
|
Wireless Connectivity Support
|
|
*****************************
|
|
|
|
Fetch Binary Blobs
|
|
==================
|
|
|
|
To support Bluetooth or Wi-Fi, ``ubx_evk_iris_w1`` requires fetching binary blobs. This can be
|
|
achieved by running the following command:
|
|
|
|
.. code-block:: console
|
|
|
|
west blobs fetch hal_nxp
|
|
|
|
Bluetooth
|
|
=========
|
|
|
|
BLE functionality requires fetching binary blobs, so make sure to follow
|
|
the "Fetch Binary Blobs" section first.
|
|
|
|
The required binary blob
|
|
``<zephyr workspace>/modules/hal/nxp/zephyr/blobs/rw61x_sb_ble_a2.bin`` will be linked
|
|
with the application image directly, forming a single monolithic image.
|
|
|
|
Wi-Fi
|
|
=====
|
|
|
|
Wi-Fi functionality also requires fetching binary blobs, so make sure to follow
|
|
the "Fetch Binary Blobs" section first.
|
|
|
|
The required binary blob
|
|
``<zephyr workspace>/modules/hal/nxp/zephyr/blobs/rw61x_sb_wifi_a2.bin`` will be linked
|
|
with the application image directly, forming a single monolithic image.
|
|
|
|
Resources
|
|
*********
|
|
|
|
- `EVK-IRIS-W1 Website <https://www.u-blox.com/en/product/evk-iris-w1>`_
|
|
- `EVK-IRIS-W1 GitHub <https://github.com/u-blox/u-blox-sho-OpenCPU/tree/master/MCUXpresso/IRIS-W1>`_
|
|
- `EVK-IRIS-W1 User Guide <https://content.u-blox.com/sites/default/files/documents/EVK-IRIS-W1_UserGuide_UBX-23007837.pdf>`_
|