boards: arm: ubx_evkninab4_nrf52833: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/ublox/ubx_evkninab4/Kconfig

@@ -7,4 +7,4 @@ config BOARD_ENABLE_DCDC
 	bool "DCDC mode"
 	select SOC_DCDC_NRF52X
 	default y
-	depends on BOARD_UBX_EVKNINAB4_NRF52833
+	depends on BOARD_UBX_EVKNINAB4

boards/ublox/ubx_evkninab4/Kconfig.defconfig

@@ -3,12 +3,9 @@
 # Copyright (c) 2021 u-blox AG
 # SPDX-License-Identifier: Apache-2.0
 
-if BOARD_UBX_EVKNINAB4_NRF52833
-
-config BOARD
-	default "ubx_evkninab4_nrf52833"
+if BOARD_UBX_EVKNINAB4
 
 config BT_CTLR
 	default BT
 
-endif # BOARD_UBX_EVKNINAB4_NRF52833
+endif # BOARD_UBX_EVKNINAB4

boards/ublox/ubx_evkninab4/Kconfig.ubx_evkninab4

@@ -3,6 +3,7 @@
 # Copyright (c) 2021 u-blox AG
 # SPDX-License-Identifier: Apache-2.0
 
-config BOARD_UBX_EVKNINAB4_NRF52833
-	bool "u-blox EVK-NINA-B4"
-	depends on SOC_NRF52833_QIAA
+config BOARD_UBX_EVKNINAB4
+	bool
+	default y
+	select SOC_NRF52833_QIAA

boards/ublox/ubx_evkninab4/board.yml

@@ -0,0 +1,5 @@
+board:
+  name: ubx_evkninab4
+  vendor: U-blox
+  socs:
+  - name: nrf52833

boards/ublox/ubx_evkninab4/doc/index.rst

@@ -36,7 +36,7 @@ found at `NINA-B40 product page`_ and `EVK-NINA-B4 product page`_.
 Supported Features
 ==================
 
-The ubx_evkninab4_nrf52833 board configuration supports the following
+The ubx_evkninab4/nrf52833 board configuration supports the following
 hardware features:
 
 +-----------+------------+----------------------+
@@ -108,7 +108,7 @@ modules share the same pinout and can be interchanged, see
 Programming and Debugging
 *************************
 
-Applications for the ``ubx_evkninab4_nrf52833`` board configuration can be
+Applications for the ``ubx_evkninab4/nrf52833`` board configuration can be
 built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details); however, the standard
 debugging targets are not currently available.
@@ -130,7 +130,7 @@ Then build and flash the application in the usual way.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: ubx_evknina4_nrf52833
+   :board: ubx_evkninab4/nrf52833
    :goals: build flash
 
 Debugging
@@ -153,7 +153,7 @@ and LEDs on the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found in
-:zephyr_file:`boards/arm/ubx_evkninab4_nrf52833/ubx_evkninab4_nrf52833.dts`.
+:zephyr_file:`boards/ublox/ubx_evkninab4/ubx_evkninab4_nrf52833.dts`.
 
 Note that the buttons on the EVK-NINA-B4 are marked SW1 and SW2, which
 are named sw0 and sw1 in the dts file.

boards/ublox/ubx_evkninab4/ubx_evkninab4_nrf52833.yaml

@@ -1,4 +1,4 @@
-identifier: ubx_evkninab4_nrf52833
+identifier: ubx_evkninab4/nrf52833
 name: EVK-NINA-B4-NRF52833
 type: mcu
 arch: arm

boards/ublox/ubx_evkninab4/ubx_evkninab4_nrf52833_defconfig

@@ -3,10 +3,6 @@
 # Copyright (c) 2021 u-blox AG
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_SOC_SERIES_NRF52X=y
-CONFIG_SOC_NRF52833_QIAA=y
-CONFIG_BOARD_UBX_EVKNINAB4_NRF52833=y
-
 # Enable MPU
 CONFIG_ARM_MPU=y