When change unaware client send ATT request it shall get Database
Out of Sync error. Reading GATT database hash is an exception here.
This was affecting GATT/SR/GAS/BV-05-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
(cherry picked from commit 77cbd27a80)
This fixes `serial_py referenced before assignment` if `flash_before`
is set.
Signed-off-by: Armin Kessler <ake@espros.com>
(cherry picked from commit 78f688a3e7)
Updates TF-M to pull in fixes from 2.1.1, and updates the tests
revision to work with this version
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit should deal with fixing unbalanced policy state locks.
When PM and PM_DEVICE are declared, default state, policy locks
should be given only when active.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
(cherry picked from commit a66c070598)
Fix DMA driver initialization when PM_DEVICE is set.
Don't put PM policy state lock if it is not active.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
(cherry picked from commit 135214d844)
Add "memory" to the clobber list"
From GCC 14 the compiler optimizes away memory accesses that do not
impact the asm block. Adding the memory to the clobber list lets the
compiler know that the memory state is to be preserved.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
(cherry picked from commit 63890e2526)
Move the _main argument to the input list rather than the output one on
the asm block and change the spec to "r". The ASM block does not return,
so it does not make sense for it to expect any output.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
(cherry picked from commit 7015a0ee37)
The ptables field in arch_mem_domain for Xtensa has excessive
padding as it is incorrectly marked with needing page size
alignment. This is simply a pointer and not the actual page
table so there is no need for that alignment. So remove it.
Fixes#71896
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
(cherry picked from commit eb9fc642b9)
For some weird reasons, enabling ICOUNT would result in some
tests crashing QEMU. So disable ICOUNT.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
(cherry picked from commit 0e9376ebff)
Add a test to make sure that the `gp` global pointer register used for
relative addressing when `CONFIG_RISCV_GP` is enabled can't be
corrupted by a rogue user thread.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit 408c151282)
Reset the gp on exception entry from u-mode to protect the kernel
against a possible rogue user thread.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
(cherry picked from commit e30db2d53f)
When logging is on and optimization and multithreading is off then
build fails to link because unoptimized compiler/linker seems to not
look beyond the function and it fails trying to link k_thread_name_get.
Reworking the code to make it known to the compiler without optimization
that k_thread_name_get is not needed and not logging current thread
name in that case.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
(cherry picked from commit 28b4bab01c)
In the description of the partial-final frame of the SMP UART transport
specification was a typo in the maximum allowed raw body size. The size
must not be larger than MTU - 5 because there are 5 bytes occupied by
total length (2), frame termination (1) and crc (2).
Signed-off-by: Simon Moser <simon.github@mailbox.org>
(cherry picked from commit a77d499e2d)
The code path for error handling and timestamping in tx path
was meant to be identical in function to old eth_mcux driver,
but there is actually a discrepancy causing no error handling
for timestamped frames, fix it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
(cherry picked from commit b29190c314)
I for the life of me do not know what is going on here with the RNB chip
but it seems this override must be set in order for the chip to work,
regardless of strap-in configuration, and if not set explicitly, the
value after a reset for these two bits will be seemingly random and
inconsistent. And it was working before by luck before removing a second
redundant reset in a recent commit, because apparently the register
was getting the opposite of the reset value according to the datasheet
which makes it work. The result of these bits after reset seem to vary
depending on host mcu, board, debugger, number of times reset, type of
reset, and with a pinch of random chance after keeping all variables
seemingly the same, so let's just set it to the value that works
explicitly, even if it doesn't make sense. The bit here doesn't have
clear documentation but it seems it's for using RMII regardless of the
strap in option, which is what we want to do anyways if we know the
interface type from DT, so I think it's fine, considering it is making
this driver work again.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
(cherry picked from commit 495a374a0d)
500 ms reset time is only for software reset and comes from IEEE spec.
Datasheet mentions for hardware reset the assertion of the signal should
only need to be 500 us, and 100 us after deassert to wait to access
programming interface.
Also remove an unused macro.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
(cherry picked from commit 96877736e4)
No real need to be enabling and disabling IRQs, this logic has been
reported to be causing spurious interrupts and strange behavior, we can
just enable the interrupt and switch to interrupt based logic one time
and keep the interrupt enabled at that point.
Also, fix a W1C bug where |= was used instead of = to clear a flag.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
(cherry picked from commit 2ab104625e)
Responses are currently set to the shell device that was configured
in the device tree.
The shell_uart driver allows for changing it's device during runtime
which leads to a situation where we recieve packets on one device
and respond on another.
This patch causes smp_shell_tx_raw to use the shell_uart device
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
(cherry picked from commit 32b1140066)
The commit adds test for stream_flash_erase_page range check.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
(cherry picked from commit 23805301b0)
Added check where stream_flash_erase_page checks if requested
offset is actually within stream flash designated area.
Fixes#79800
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
(cherry picked from commit 8714c172ed)
This change was in the same commit previously reverted and seem to be
unrelated and should not be reverted.
Fixes the problem:
..... /swap_helper.S:432:(.text.z_arm_svc+0x26):
relocation truncated to fit: R_ARM_THM_JUMP11 against symbol
`z_arm_int_exit' defined in .text._HandlerModeExit section in
....core/cortex_m/libarch__arm__core__cortex_m.a(exc_exit.c.obj)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
(cherry picked from commit d9bc0b60b9)
This commit moves the test buffer from ITCM (not accessible by DMA) to DTCM
on several NXP boards, to make the test successful.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
(cherry picked from commit eaa799a9b5)
This commit places the chan_blen_transfer DMA test's TX and RX buffers
in a separate file that gets entirely relocated. This ensures that the
buffers reside in the correct memory, without breaking other things
due to relocation of test data/code.
Fixes#75676.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
(cherry picked from commit 3099491f3e)
The terminal offset for subcommands' help text isn't
computed correctly, fix it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit fd1be9849c)
- Use `SHELL_CMD_ARG_REGISTER` for the main cmd to state the
required number of arguments, this helps to remove the
runtime check from the command, and also print the help
message to the terminal when the argument count is
unexpected.
- Some changes to the help text that hopefully makes the
mandatory and optional arguments more obvious to the user
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit 276ccd04e7)
There is a typo in the part number list for LPC55S69. The
LPC55S69JET98 should be LPC55S69JEV98.
Fixes#80541
Signed-off-by: David Leach <david.leach@nxp.com>
(cherry picked from commit 46042f73cf)
Blanking On/Off calls should not return 0 when there is no panel
controller to forward them to, instead they should return ENOSYS to
signal to the application that they were not actually executed.
"device_is_ready" does check for null, but also for
"dev->state->initialized == false", so we need to isolate the
"dev == NULL" case.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
(cherry picked from commit f7de44dfaf)
- fixes overlay-udp.conf build for platforms without TRNG.
- adds TEST_RANDOM_GENERATOR, as for most network samples.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
(cherry picked from commit 5c376ad24c)
Fix the order of the arguments to sys_write32().
Fixes: #80750
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
(cherry picked from commit 0bb5270f7b)
lots of values from the DT where not set corretly, if
`CONFIG_SPI_NOR_SFDP_RUNTIME` was
enabled. This fixes it.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
(cherry picked from commit 27aeabb5b2)
To accommodate for some slow tests on up2.
For example: tests/arch/x86/info/arch.x86.info.userspace
Execution time of this test is close to 55s and sometimes
above up to the 60s.
Related issue: #80134
Signed-off-by: Artur Wilczak <arturx.wilczak@intel.com>
(cherry picked from commit 9cce72daa1)
The MCUmgr statistics only work correctly when selecting
MCUMGR_SMP_LEGACY_RC_BEHAVIOUR option. Checks the option
flag on the stat_mgmt_list and fix the behavior.
Fixes: 80476
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
(cherry picked from commit b46e176704)
WS25Q512JV can only run at 104MHz at 3.3V, unless the read parameter
bits are changed. Since we don't reprogram these currently, reduce max
frequency to safe value
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
(cherry picked from commit 23d253727c)
Add support for the W25Q512JV with the FLEXSPI, using a custom
LUT table.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
(cherry picked from commit 6bc73df06b)
The second condition needs to check ARP probes only
The ACD is not properly implemented as described in RFC5227 ch. 2.1.1
The implementation incorrectly detects an IP conflict, if an ARP request
is received for the target IP.
The reason is that the current implementation checks for ARP requests
instead of ARP probes.
Signed-off-by: Andreas Huber <andreas.huber@ch.sauter-bc.com>
(cherry picked from commit 27d93f8b6c)
Update the EDTT module to:
b9ca3c7030518f07b7937dacf970d37a47865a76
Including the following:
* b9ca3c7 Fix for for python >= 3.11
* fe9b1d1 Corrected ISO interval for LL/CIS/PER/BV-05-C
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
(cherry picked from commit 59685b512e)
If adding/removing to the domain of the current running
thread, we need to update the hardware MPU regions or else
the addition or removal would not be reflected to current
running thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
(cherry picked from commit da5f7e1816)
This adds a spinlock to make sure writing to hardware MPU
regions is atomic, and cannot be interrupted until all
regions are written to hardware.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
(cherry picked from commit 6bd0dcf920)
Sync the section of the custom.css dedicated to object
signatures with Godot custom CSS.
Fixes#80005.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
(cherry picked from commit c7f1f32ebe)
Build the C++ version of the Hello, World sample as part of the
multiplatform (build) test in CI.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
(cherry picked from commit cd543887f4)
Zephyr SDK compatibility level 0.16 is now an LTS intended for
Zephyr v3.7 LTS.
Thus, limit the upper Zephyr SDK lookup to <0.17, so that developers
working with Zephyr v3.7 LTS and latest Zephyr main can install both
Zephyr SDK 0.16.x along side Zephyr SDK >=0.17 and have the Zephyr SDK
0.16.x series being used for v3.7 LTS development.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #80200
CMake `find_package(<package> <version>)` support the use of ranges,
like `1.0.0...4.0.0`.
Update the FindZephyr-sdk.cmake module to support this.
This allows looking up the Zephyr SDK with an upper boundry, for example
`find_package(Zephyr-sdk 0.16...<0.17)`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit addresses an issue where enabling the alarm or update
callbacks unexpectedly disabled the RTC's programmable clock output
during runtime.
The interrupt configuration has been moved to the driver's init
function.
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
(cherry picked from commit f395519104)
The register offset definition of the I/O port Data Base Address
register (0x60, 0x61) and Command/Status Base Address register
(0x62, 0x63) are reversed. This commit fixes it to avoid confusion.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
(cherry picked from commit 51cfbd8c5f)
The IRQ for level 1 and above is incremented by 1 when encoded
with Zephyr's multilevel IRQ scheme, so it should be
decremented by 1.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
TX/RX FIFO underrun shouldn't crash the RTOS when it occurs.
Also, since this can also happen under "normal" conditions
(i.e: DMA doesn't copy data fast enough from/to SAI's FIFOs)
the software should be able to recover from it.
As such:
1) Remove `z_irq_spurious()` call.
2) Clear error flag
3) De-escalate error message to warning message
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
(cherry picked from commit e224a41ec8)
Added extra testcases for the IGMPv3 protocol. The IGMP driver is
supposed to send an IGMPv3 report when joining a group.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
(cherry picked from commit e6dd4cda89)
Add igmp.h file to declare definitions for IGMP that are not meant te be
included by the application but can be used in e.g. tests.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
(cherry picked from commit ba9eca3181)
According to RFC2236 section 2.5, the IGMP message may be longer then 8
bytes. The rest of the bytes should be ignored.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
(cherry picked from commit c646dd37e5)
The header length of the net ip packet was calculated using only the
net_pkt_ip_hdr_len function. The correct header length should be
calculated by adding net_pkt_ip_hdr_len and net_pkt_ipv4_opts_len. This
resulted in an incorrect IGMP version type in case of IGMPv2 message
(when IGMPv3 was enabled). The IGMP message was not parsed correctly and
therefore dropped.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
(cherry picked from commit f852c12360)
.conf files added to enable INPUT_ESP32_TOUCH_SENSOR during sample build.
The absence of these files incorrectly prevented the input_dump sample
build from failing due to missing required hal files.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Add an opaque pointer to store upper layer private data and initialize
it with the USB device context during controller initialization. Use the
pointer in event processing to get the correct context.
Fixes commit 48f2a4bc1a
("usb: device_next: remove initialized state checks in event processing")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
(cherry picked from commit 5ddaa3b1a1)
SOC_FLASH_MCUX has additional dependencies for LPC55xxx CPUs, due to the
fact that the flash should be disabled when executing in nonsecure mode.
Since the merge of HWMv2, this dependency has been set incorrectly at
the SOC level, resulting in the IAP flash driver being enabled when
targeting CPU1, which is incorrect. Fix the Kconfig dependency to
resolve this issue.
Fixes#79576
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
(cherry picked from commit feb0241536)
Booting the hello world sample fails with an error on the odroid go:
I (124) quad_psram: This chip is ESP32-D0WD
I (124) esp_psram: Found 4MB PSRAM device
I (124) esp_psram: Speed: 40MHz
I (125) esp_psram: PSRAM initialized, cache is in normal (1-core) mode.
SPIRAM size is less than configured size, aborting.
abort()
The device features only 32 Mbit PSRAM (4 MiB), see
dts/xtensa/espressif/esp32/esp32_wrover_e_n16r4.dtsi
included from
boards/hardkernel/odroid_go/odroid_go_procpu.dts
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
(cherry picked from commit db1adf4c7e)
Ensure initial search menu visibility is properly set so that key
events don't get trapped preventing arrow key navigation on the
document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
(cherry picked from commit b3776ca97c)
Fixes an issue with HWMv2 boards whereby the specified board
revision was not applied at the correct place, which would cause
the target image to fail configuration
Fixes#79208
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
(cherry picked from commit 96c6c7863a)
A response returned after a request times out would increment the
semaphore and stay until the next request is made which will immediately
return when k_sem_take is called even before a response is returned. This
will once again have the same problem when the actual response arrives.
So the wait semaphore just needs to be reset before transmitting.
Signed-off-by: Abram Early <abram.early@gmail.com>
(cherry picked from commit 583f4956dc)
The `struct bt_l2cap_le_chan` and `struct bt_l2cap_br_chan` objects
should be memset before passing them to the stack.
This was not stated anywhere, but all the in-tree users are doing it, so
it must be API.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit e1ac3866ee)
qemu_riscv32e uses a different ISA and is kinda special, add it
to the testcase for better coverage.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Account for the scenario when we are doing `esf`-based
unwinding from a function which doesn't have any callee.
In this case the `ra` is not saved on the stack and the
second function from the top of the frame could be missing.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Enable the `MBEDTLS_PEM_WRITE_C` mbedtls configuration option when
`CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT` is selected.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
(cherry picked from commit ad208e1e7c)
Fixes implicit sign-extension/potential overflow by explicitly casting
to int64_t.
Signed-off-by: Kurtis Dinelle <kurtisdinelle@gmail.com>
(cherry picked from commit 5eeff698ca)
No need to reset in cfg link, this was blocking system workqueue during
phy callbacks that call cfg link, since this happens from monitor work
handler which is in the system workqueue.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
(cherry picked from commit e904743152)
Running 'west blobs fetch' does not verify the digest of downloaded files:
1. if the checksum of the previously downloaded file does match
that in the blob metadata (status BLOB_PRESENT), do nothing
2. if the checksum of the previously downloaded file does not match
that in the blob metadata (status BLOB_OUTDATED),
download the "up to date" file
3. if the blob has not yet been downloaded (status BLOB_NOT_PRESENT),
download it
None of the 2) and 3) code paths will verify that the checksum of the file
just downloaded actually matches the digest in the blob's metadata.
In the event that the metadata of a module is incorrect, then the user
will not notice anything, and may rely on an unexpected binary,
e.g. a static library for a different architecture.
According to the Binary Blobs documentation [1], the expected
behavior is to check the blob digest after downloading.
[1] Fetching blobs, Zephyr 3.6.0 (still applies to Zephyr 3.7.0rc3)
docs.zephyrproject.org/3.6.0/contribute/bin_blobs.html#fetching-blobs
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
(cherry picked from commit 2b2a0e04b2)
Replace blob status literals with the corresponding
constants defined in zephyr_module.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
(cherry picked from commit ae9326c920)
The clock control mcux rev2 returns FlexSPI1 clock rate when FlexSPI2
clock rate is requested.
Signed-off-by: Martin Stumpf <martin.stumpf@vected.de>
(cherry picked from commit 4ec266152d)
ESP32-S3 initialization code should apply the errata
after cache initialization. This fixes it making sure
data and cache instruction are properly
handled and let following calls to work as needed.
This also update hal_espressif to force gcc to treat
register bitfield structs declared as volatile to
ensure writes on 32 bit peripheral registers.
Fixes#71397Fixes#76325
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The minimum Python version was bumped for Zephyr LTSv3, but only in the
documentation and CI. The build system would still accept Python 3.8,
yet some scripts in tree have already broken support with that version.
Incompatibility errors should be prevented early.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
(cherry picked from commit 9d1b361265)
This commit addresses an issue in net_context_bind() where unaligned
memory access was not properly handled when checking for INADDR_ANY.
The problem primarily affected MCUs like ARMv6 that don't support
unaligned memory access.
- Use UNALIGNED_GET() to safely access the sin_addr.s_addr field
- Ensures correct behavior on architectures with alignment restrictions
This fix improves compatibility and prevents potential crashes or
unexpected behavior on affected platforms.
Signed-off-by: Daekeun Kang <dkkang@huconn.com>
(cherry picked from commit b24c5201a0)
Test if callee-saved-registers values are as expected.
Signed-off-by: David Reiss <dreiss@meta.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
(cherry picked from commit 4da4ee8ece)
Restore the s0 we saved early in ISR entry so it shows up
properly in the CSF.
Signed-off-by: David Reiss <dreiss@meta.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
(cherry picked from commit 4bbc2a7893)
Usb "write" method never copies the input data buffer, it uses the
buffer pointer directly. The fact that it was on the stack made
the buffer ephemeral, and could disappear before the USB transfer
actually occurred. The data transmitted was then random. This commit
converts the transfer buffer to a static buffer, so that it always
exists for the duration of the USB transfer.
Known side-effect: if "read capacity" command is read twice
simultaneously, the same buffer will be used twice. As the capacity of a
USB drive should not change between 2 calls, this side effect can be
ignored.
Signed-off-by: Alexi Demers <alexi.demers@axceta.com>
(cherry picked from commit 32481b6418)
Check the remaining buffer length is not less than
required data length before pulling data from the
buffer.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
(cherry picked from commit 8113ff7e9c)
Allow IRQs to work on every hart regardless of the mapping
of the contexts.
Add a test to validate the hart-context mapping.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit 475ff826d6)
In case peer goes down or we disconnect from the network during the
TLS handshake, the TLS socket may block indefinitely during
connect()/accept(), waiting for data from the peer. This should be
avoided, hence use the preconfigured timeout for the TLS handshake,
same as we use for TCP-level handshake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
(cherry picked from commit fc007eeef5)
The L2 function `ieee802154_decipher_data_frame()` relied on upper layer
LL address fields which breaks encapsulation.
Also fixes a bug introduced in another fix that went overboard (#53734).
Fixes: #78490
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
(cherry picked from commit da0371accf)
Found a few variable declarations that were not yet moved to the top of
the function/block. Doing this before actually fixing #78490 so that the
fix becomes more readable.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
(cherry picked from commit 766fda06c2)
Package in the requirements-run-test.txt file, bz,
is not package enabling bz2 support.
It is a security concern and must be removed.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
(cherry picked from commit cbe5d9833b)
Make sure we check the checksum offloading capabilities correctly
for VLAN interfaces. Use the real Ethernet interface when doing the
check.
Fixes#78724
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
(cherry picked from commit 00bb90a42e)
When an incoming PAN ID does not match or when an error occurs while
sending association requests, then locks were not properly released.
Fixes#78495
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
(cherry picked from commit 041d8c707c)
The STM32 SPI driver, `spi_ll_stm32.c`, reads the clock frequency via
`clock_control_get_rate()`. The first `clocks` index is used as subsystem
argument if there is no second index, but this is not the source clock for
SPI 1, 2, and 3.
This causes the prescaler value calculation to be incorrect, resulting in a
frequency potentially above the `spi-max-frequency` value.
Add clock source for SPI instances 1, 2 and 3, that matches the default
clock configuration register reset value, which resolves the issue.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
(cherry picked from commit 40cae2d281)
If the dispatcher is muxing the connection i.e., so there are two
services for the same port, then mark service socket descriptor
of the service with the socket number so that "net sockets" shell
command can show a proper value for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
(cherry picked from commit 1f627e3a1b)
The socket services API has a limitation where the user data is shared
between file descriptors described in the same service.
This can cause problem in DNS dispatcher where each listened socket
needs to have their own dispatcher struct set as user data so that we
can map between dispatcher context and socket. Solve this by always
have a dispatcher table as user data, and then have the actual mapping
done via the dispatcher table when receiving data to the dispatcher socket.
Fixes#78146
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
(cherry picked from commit caf9fd345f)
Fill the memory of all CPU's IRQ stack with 0xAA on init, so
that `z_stack_space_get` can calculate the remaining space
correctly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit 035c822253)
Add `DT_INST_NUM_IRQS()` to get the number of interrupt lines
of the current `DT_DRV_COMPAT`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit ee08ebd9ca)
Fix USB w/ SPEED_OPTIMIZATIONS for LPC55xxx SoCs
Root cause was non-volatile register access,
which could get optimized by the compiler
(by -fschedule-insns, specifically)
Signed-off-by: Maxime Vincent <maxime@veemax.be>
(cherry picked from commit f86f98fa2e)
When interrupts are placed in flash, it needs to be disabled
when flash operations are called. This is not happening in current
v3.7.0 release, causing system to crash whenever flash operations
and interrupts happens simultaneously.
Fixes#77952
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Apply cleanups suggested by Anas in a Github discussion to the
sample.yaml file.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
(cherry picked from commit f889c4e288)
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
(cherry picked from commit 030c1c8308)
Add required initialisation of OCOTP. The IMXRT10XX
variants don't support fuseWords to be greater than 1.
MAC0 fuse map address is 0x22 instead of 0x620.
Fill in mac_addr buffer correctly.
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
(cherry picked from commit 931628a78a)
If using `<zephyr/linker/section_tags.h>` without including
`zephyr/linker/sections.h` as well, we get a warning an the linker fails
to place the data in the desired section.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
(cherry picked from commit 77eafac1bf)
Modify the function "i2s_stm32_set_clock" to handle the case where pclk_len
it is not greater then 1 and to ensure that the freq_in
variable is correctly set in both cases.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
(cherry picked from commit 2353b9391b)
The `bt_id_set_adv_own_addr` function itself tries to allocate a buffer
for the command and it failes due to lack of buffers, it returns error.
However, the `le_ext_adv_param_set` function doesn't handle the error
properly and keeps its own allocated buffer.
This commit releases the allocated buffer.
Partially fixes mesh in #77241.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
(cherry picked from commit 2f02474448)
Fix python executable name in percepio module's CMakeLists.txt
Signed-off-by: Erik Tamlin <erik.tamlin@percepio.com>
(cherry picked from commit bb784c45dd)
Currently, the test doesn't clear the control data buffer before
calling recvmsg. This leads to recvmsg being unable to add the new
control data, which corresponds to the current received data.
This commit aims to clear the control data buffer to match most use
cases, when the control data buffer is empty before calling recvmsg.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
(cherry picked from commit 179c85aa06)
According to recvmsg man page, msg_controllen should be set to the sum
of the length of all control messages in the buffer.
This is missing from the current recvmsg implementation.
This commit aims to fix this by updating msg_controllen each time control
data are added to the buffer.
This commit also fixes cases where the msg_controllen is cleared
incorrectly.
Fixes#77303
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
(cherry picked from commit 5d643f4b00)
Very very weird behavior.
Deleting the `options & BT_LE_ADV_OPT_USE_NRPA` branch in
`id.c:bt_id_set_adv_own_addr` makes the test pass. But add a log in that
branch, and you'll see that we never take it in the UT binary..
I don't have time for this, maybe some compiler guru or C language
lawyer can look at that decompiled function and figure out the root
cause.
Someone should also really fix the Bluetooth unit tests and make them
run on any Bluetooth related PR. Also nightly.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit 4ab8073b87)
We want to make sure `struct closure` fits in the user data, so a user data
size of `sizeof(struct closure)` is valid.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
(cherry picked from commit 5736b71193)
The imx USDHC driver previously queried the peripheral's internal card
detect signal to check card presence if no card detect method was
configured. However, some boards do not route the card detect signal and
do not work correctly with the DAT3 detection method supported by this
peripheral. As a fallback, assume the card is present in the slot but
log a warning to the user.
Fixes#42227
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
(cherry picked from commit 17f71e19f0)
A 16-bit value built using byte shifts and ORs from a given
couple of lsb and msb bytes will result to be the same on both
little-endian and big-endian architectures, e.g.
uint8_t lsb, msb;
int16_t val;
/* val is the same number on both le and be archs, but has
different layout in memory */
val = (msb << 8) | lsb;
All the xyz_raw_get() APIs of stmemsc sensor module build the sensor
data using the above method and DO NOT hence require (it actually leads
to wrong values on big-endian machines) to use any le/be swap routines,
such as sys_le16_to_cpu().
Fix#75758
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit 9ea4cb96cd)
Re-run issue check when a PR is updated, i.e. when someone adds
'Fixes...` to the PR body.
This is mostly for release branches and has no effect on main branch.
Also, add concurrency check in the workflow.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
(cherry picked from commit 4077249cc7)
In SoC imxrt1010, edma channel has separate interrupt entry,
not like the rest of in-tree imxrt SoC series
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
(cherry picked from commit b7b17fa0eb)
Fix undefined reference to MSG_DONTWAIT while building websocket client.
Signed-off-by: Joel Guittet <joelguittet@gmail.com>
(cherry picked from commit 4c16ec1fba)
IMXRT117X bus clock should be 240MHz and IMXRT116X should be 200MHz
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
(cherry picked from commit d1a6b45345)
IMXRT11XX secondary core should not deinit ENET PLL
as it could be configured by primary core.
Signed-off-by: Anders Bjørn Nedergaard <abn@polytech.com>
(cherry picked from commit 29dc419ad2)
Trigger the TX processor on connection teardown.
When a disconnection happens before the controller has acknowledged some
ACL fragments the host has sent, we run `process_unack_tx()` to free
those unacknowledged buffers and their associated TX contexts.
The problem is that the TX processor still holds a reference to the conn
object. That reference is not released until the TX processor is
triggered again and figures out that the connection is invalid.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit 80a92f51a5)
Verifies that we don't leak connection references when the peer goes out
of range whilst we are fragmenting and sending data to the controller.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit 043de7da2a)
Writing directly to Px_DATA_REG modifies pins which are not
indicated by mask, causing gpio_basic_api test to fail.
Use Px_SET_DATA_REG and Px_RESET_DATA_REG to modify only
pins indicated by mask.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
(cherry picked from commit 782967a1e3)
Remove pdc entry only if index exists when CONFIG_PM
is set.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
(cherry picked from commit 82d17f1f2c)
Set pin to input with no resistors selected when it is configured as
GPIO_DISCONNECTED.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
(cherry picked from commit df86860319)
Clear pending interrupts after disabling TRNG to avoid
smartbond_trng_isr getting called with TRNG disabled
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
(cherry picked from commit bacd6c31d6)
This function call frees the buffer kept by the host for reassembling L2CAP
PDUs into.
Without this call, the current buffer will eventually be
leaked, leading to a non-functional host due to lack of RX buffers.
The effect is worse when host flow control is not enabled, as the RX
buffer pool is shared with events, which means communication with the
controller is essentially dead.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit 8a2fe27c00)
`net_buf_alloc(K_FOREVER)` can now return NULL if running in the system
workqueue. `bt_hci_evt_create()` is called in that context in a few cases.
Since we can't really do anything about it, add a (default-on) assert.
This should ideally never fail. I saw it fail because of a leak in the ACL
buffer pool, which is also shared with events when host flow control is not
enabled.
In that particular case, the host is rendered non-functional, so trying to
recover using error handling is futile.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit 5a4fdfbf3e)
Add a test that verifies no resources are leaked when re-assembling L2CAP
PDUs over an unreliable channel (ie. lots of disconnects).
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit e489ec2b95)
set _XOPEN_SOURCE appropriately to avoid compilation errors
due to missing S_IFxxx macros on some systems.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
(cherry picked from commit 4458a05ec2)
This test create a setup where an ISO broadcaster will send fragmented
data and get stopped after sending the first fragment and repeating that
operation multiple time to verify that buffers are not leaked.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
(cherry picked from commit f3dcaaee35)
When sending data using ISO and the data is fragmented, if the
connection is cut before all the fragments are sent, the data buffer
will be leaked.
Fix the issue by unref'ing the buffer when ISO is not in a connected
state.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
(cherry picked from commit 3a098c9f61)
When disconnected while sending data, if ISO doesn't get the number of
completed packets it will not call `process_unack_tx` and thus will leak
TX context.
Fix that by setting the connection state in ISO disconnection which will
trigger a call to `process_unack_tx`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
(cherry picked from commit 70696f5b0f)
http1_headers_sent flag has to be cleared when entering
HTTP_SERVER_REQUEST_STATE and not only on the client init. Otherwise,
serving multiple HTTP1 POST requests over the same connection does not
work as intended (headers were not sent for the second and further
requests).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
(cherry picked from commit 086faa56aa)
Add missing "0" to the SRAM devicetree node addresses.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
(cherry picked from commit ec85b0b4ef)
The OK response should be processed before entering CMUX mode.
Use UART ISR mode by default.
Fix warnings and errors produced by the sample.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
(cherry picked from commit bbcf23e95e)
gcc 13 produces a build warning (see below), as it seems to
believe the number of read bytes may overflow the frame_size
type.
Let's increase the frame_size bitwidth to avoid this.
(Any 32bit type, signed or unsigned, avoids this warning)
The build warning:
```
In file included from /usr/include/features.h:502,
from bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from include/stdint.h:9,
from zephyr/include/zephyr/types.h:11,
from zephyr/include/zephyr/kernel_includes.h:21,
from zephyr/include/zephyr/kernel.h:17,
from zephyr/drivers/bluetooth/hci/userchan.c:9:
In function ‘read’,
inlined from ‘rx_thread’ at drivers/bluetooth/hci/userchan.c:201:9:
/usr/include/i386-linux-gnu/bits/unistd.h:28:10: warning: ‘__read_alias’
specified size between 4294902273 and 4294967295 exceeds maximum object
size 2147483647
[-Wstringop-overflow=]
28 | return __glibc_fortify (read, __nbytes, sizeof (char),
| ^~~~~~~~~~~~~~~
drivers/bluetooth/hci/userchan.c: In function ‘rx_thread’:
drivers/bluetooth/hci/userchan.c:187:32: note: destination object allocated
here
187 | static uint8_t frame[512];
| ^~~~~
/usr/include/i386-linux-gnu/bits/unistd-decl.h:29:16: note: in a call to
function
‘__read_alias’ declared with attribute ‘access (write_only, 2, 3)’
29 | extern ssize_t __REDIRECT_FORTIFY (__read_alias, (int __fd, void
| ^~~~~~~~~~~~~~~~~~
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
(cherry picked from commit ee08327b4c)
Relax the radio packet pointer assignment deadline assertion
until access address being transmitted. The PDU buffer is
probably only needed just after access address is being
transmitted or received by the radio. This will give some
more breathing room for slow CPUs like in nRF51x SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 4dbfb22a7e)
Fix regression using speed optimization introduced in
commit 1b7fe792e0 ("Bluetooth: Controller: Support Link
Time Optimizations (LTO)").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 642d4be940)
Fix regression in encrypted connection introduced in
commit f3deccda91 ("Bluetooth: Controller: CCM read data
to early when DF enabled on PHY 1M").
Due to this nRF51x SoC hang waiting to encrypt and/or
check MIC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit b9a7a64563)
In case of ISR latencies, if packet pointer has not been
set on time then we do not want to check uninitialized
length in rx buffer that did not get used by Radio DMA.
This would help us in detecting radio ready event being
set? We can not detect radio ready if it happens twice
before Radio ISR executes after latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 40b71c9773)
Only 3 bytes (PDU_EM_LL_SIZE_MAX) is required for empty PDU
transmission, but in case of Radio ISR latency if rx packet
pointer is not setup then Radio DMA will use previously
assigned buffer which can be this empty PDU buffer. Radio
DMA will overrun this buffer and cause memory corruption.
Any detection of ISR latency will not happen if the ISR
function pointer in RAM is corrupted by this overrun.
Increasing ISR latencies in OS and CPU usage in the
ULL_HIGH priority if it is same as LLL priority in
Controller implementation then it is making it tight to
execute Controller code in the tIFS between Tx-Rx PDU's
Radio ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit e36ddffa7a)
Fix ISR profiling when using single timer for tIFS radio
switching wherein in the timer is cleared on every radio
end. Hence, the captured timer value is the latency and
does not required the radio end timestamp to be subtracted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 8ef919a7a4)
Provide Radio ISR latency in microseconds when asserting due
to high ISR latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 53b6bc56fc)
Add ISR profiling using ticker ticks, hence profile ISR
CPU use outside radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 409402f0cc)
Use uint16_t to store ISR profiling value to avoid overflow
in case of higher latencies.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 56ca9b873d)
Fix in-system ISR profiling for advertiser and connection
role for the missing implementation when there is CRC error.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
(cherry picked from commit 90bc2b2064)
Update the percepio module to use TraceRecorder v4.9.2.hotfix1
Signed-off-by: Erik Tamlin <erik.tamlin@percepio.com>
(cherry picked from commit 858a687052)
It was not being set, and thus if the user_data contained garbage from
before, then conn.c would attempt to call that garbage.
Static channels don't have this issue, as every "SDU" fits into one PDU.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Huajiang Zheng <nxf88597@lsv051208.swis.nl-cdc01.nxp.com>
(cherry picked from commit 1c6510312d)
Modify the test so it checks that user_data is used and then cleared by
the stack.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit 08706f98bc)
Storing stuff in user_data? That's a paddlin'
We have been debugging issue after issue because ownership of this
"user" data is not clearly defined. Now it is. L2CAP owns the user_data
field entirely, as soon as `send()` is called.
Also add a warning and retval using CHECKIF.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
(cherry picked from commit ea9449979b)
cplusplus-rom linker initialization was wrongly placed
in RAM area when it should be in ROM area.
Fixes#75853
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
(cherry picked from commit c374d3147b)
In lis2dux12_set_odr(), the call to stmemsc module lis2dux12_mode_set()
API is done with the .fs field left uninitialized, so setting the
underlying device regs in an unproper way.
Suggested-by: Luis Ubieda <luisf@croxel.com>
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit 8bc00e1420)
Change the `platform_allow` to multi-line format so that newly
supported archs/boards can be added as a new line.
Refactor the tags out to `common`, and add
`CONFIG_ARCH_HAS_GDBSTUB` filter
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
(cherry picked from commit b97d97ff17)
Make sure we are not accessing NULL pointer when checking
if the IPv4 mapping to IPv6 is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
(cherry picked from commit cf552905f4)
The function `bt_hci_le_past_received_v2()` is not compiled
in for this configuration, so the reference needs to be removed.
Fixes#76268.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
(cherry picked from commit e23345b4d1)
Disables running this sample as doing so requires qcbor, which
is not apache licensed
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
(cherry picked from commit db5a5fa109)
Commit 3dbbb73 accidentally changed the MIPI_DBI spi interface from
spi4 to spi2 for this board during conversion to use the MIPI_DBI wrapper.
This does not work, and this change reverts it back to spi4.
Tested on actual boards (bl5340, bl5340pa).
Before this change LVGL demo displays nothing, after this change it works
fine again.
Signed-off-by: Daniel Berlin <dberlin@dberlin.org>
(cherry picked from commit 08e44f9dae)
Windows TCP stack has a peculiar behavior - when running iperf, it will
fill out the RX window almost entirely, but will not set PSH flag on
packets. In result, our stack would delay the ACK and thus window
update, affecting throughputs heavily.
In order to avoid that, keep track of the most recent window size
reported to the peer, and reduce it when receiving new data. In case the
RX window, as seen from the peer perspective, drops below certain
threshold, and the real RX window is currently empty, send an ACK
immediately when updating window, so that peer can continue
with sending data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
(cherry picked from commit 349bf81e00)
Prior to the fixes in the previous commits, combining a build
for native_sim with
CONFIG_CPP=y
CONFIG_POSIX_API=y
CONFIG_STD_CPP20=y
CONFIG_REQUIRES_FULL_LIBCPP=y
would fail.
It succeeds now.
This change adds a testcase to monitor that scenario in CI.
Note: this was partially necessary because the deprecation of
CONFIG_NET_SOCKETS_POSIX_NAMES is not yet complete, so there
is a dependency cycle, and also because <sys/types.h> was
pulling in the host <sys/types.h> instead of Zephyr's or one
of the embedded OSes we support.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
(cherry picked from commit d0808473f2)
A number of types such as uid_t, gitd_t, etc, were defined in
sys/stat.h to workaround compatibility issues many years ago.
Since posix_types.h is slated to become equivalent to
sys/types.h in terms of standard headers, move these types
to where they belong.
For more information, please see
https://pubs.opengroup.org/onlinepubs/9699919799/\
basedefs/sys_types.h.html
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
(cherry picked from commit 6667b500c6)
A corner case involving C++, posix, networking, and native_sim
was causing problems.
Even though C and C++ builds should include zephyr/posix/.. in
the default search path with `CONFIG_POSIX_API=y`, for some
reason, the native compiler pulls in /usr/include first anyway.
The stat.h header pulled in <sys/types.h> (which is normally
fine) but due to the native build, it was pulling in
/usr/include/sys/types.h, from the host toolchain.
Explicitly include <zephyr/posix/posix_types.h> instead of
<sys/types.h> from stat.h, and continue using the workarounds
for native builds (explicitly including zephyr/posix/arpa/net.h
from net/sockets.h .
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
(cherry picked from commit 81f5205006)
fix to ensure that USB audio interface is not starved when
no audio data is received over bluetooth.
Signed-off-by: Tim Sørensen <tims@demant.com>
(cherry picked from commit 86032bcf85)
Apparently, disabling the intterupt is not enough,
because without clearing the flag, some errors are occurring.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
(cherry picked from commit 9f56ff5d64)
There were code paths that could have lead to divide by zero given an
invalid scale setting for accel or gyro. In practice this should be an
invalid setup even before getting to these conversion functions. The
conversion functions now better show all valid values are accounted for
by using CODE_UNREACHABLE in the default case.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
(cherry picked from commit 5474b611cb)
Remove HTS221 sensor support from sensortile_box_pro as it has been ruled
out from final version. In fact, HTS221 is in the process of being
terminated and is not recommended for new design. The candidate replacement
is SHT40 from Sensirion, which is available also as a DIL24 adapter, which
can be plugged on sensortile_box_pro board.
See SENSEVAL-SHT4XV1:
https://www.st.com/en/partner-products-and-services/senseval-sht4xv1.html
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit cdce68e4c8)
The global otg interrupt hs/fs is enabled by the udc_stm32
driver. Get it in the list of interrupts of the OTG node.
Use UDC_STM32_IRQ naming.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
(cherry picked from commit 9ec7697bdb)
If it's a I3C v1.0 device without any HDR modes do not treat as an error
if GETCAPS gives no valid response.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
(cherry picked from commit c76e776b67)
Return to sensor_api i/f the temperature in Celsius instead
of the register raw value in LSB.
Fixes#75686
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit a1f9793e0e)
The current implementation assumes that sensor odr and range are
always configured in the Device Tree at compile time which might
not be the case.
Instead, application can set odr and range either at compile time
through the DT or using SENSOR_ATTR_SAMPLING_FREQUENCY and
SENSOR_ATTR_FULL_SCALE attributes at runtime, so each driver instance
must keep trace of the latest values set and use them in the sensor
APIs which require them (e.g. lis2dux12_mode_set).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit cf20aa050d)
When setting the full scale through SENSOR_ATTR_FULL_SCALE the
driver must convert the g value (i.e. one of 2g/4g/8g/16g) to
the corrispondent sensor fs raw value.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit 2eaec8b779)
Extended the x-nucleo-iks4a1 shield standard sample adding lsm6dsv16x
sensor die temperature display.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
(cherry picked from commit 878b5a9d2e)
k_usermode_string_copy does not accept const in its arguements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
(cherry picked from commit 2a39132645)
Enabling BT_HCI_SETUP for STM32WB55 to have a
correct and proper initialization procedure to fix
#75318 issue
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
(cherry picked from commit 4fc77248de)
Implementing HCI setup function to have a correct and proper
initialization procedure to fix#75318 issue
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
(cherry picked from commit 7ca2072ed0)
Parse the more flag in coap_get_block2_option(), so that the function
can be used not only with requests but also with replies (where the more
flag should not be ignored).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The block number in block1/2 options can be encoded on up to 20 bits
according to RFC 7959, therefore the underlying type used in helper
functions to retrieve the block number should be large enough to hold
the result. Therefore, replace the container for block number with
uint32_t instead of uint8_t.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The .ref_internal field in the adc_driver_api
struct was previously unset.
Now it's set to the proper value, 1 V.
Signed-off-by: Julia Azziz <juliaazziz7@gmail.com>
(cherry picked from commit e7cfb05c72)
Some offloaded ifaces have an L2, but lack support for
net_l2->send. This edge case is not handled by
net_if_send_data, resulting in a NULL dereference under
rare circumstances.
This patch expands the offloaded iface guard in
net_if_send_data to handle this edge case.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
(cherry picked from commit 1c79445059)
Fixes issues with net_ptp_time arithmetic where second
overflow/underflow would not be handled properly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
(cherry picked from commit 43b948f9a8)
Offset should be *subtracted* from current clock value, not added.
This was causing clock to accumulate error instead of actually
"converging".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
(cherry picked from commit dff19c3ac6)
Fix the NM iface type check error, should use (1 << WIFI_TYPE_STA),
instead of WIFI_TYPE_STA. Same for WIFI_TYPE_SAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
(cherry picked from commit bf42164084)
In case POLLIN is set, and no new application data has been detected,
the ztls_poll_update_ctx() should only return -EAGAIN if no other events
are available for the socket. Otherwise, the function may end up
busy-looping, in case for example POLLOUT is also monitored for the
socket.
Current check verifying that was wrong, as it caused to function to
return -EAGAIN even if some other events could've been reported for the
socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
(cherry picked from commit bfe958a7f1)
Initialize TCM and SRAM contents only after a destructive reset (e.g.
PoR reset). SRAM retains content during functional reset through a
hardware mechanism, therefore accesses do not cause content
corruption errors.
Fixes#75912
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
(cherry picked from commit ec7289039b)
According to the riscv's `arch.h`:
+------------+ <- thread.arch.priv_stack_start
| Guard | } Z_RISCV_STACK_GUARD_SIZE
+------------+
| Priv Stack | } CONFIG_PRIVILEGED_STACK_SIZE
+------------+ <- thread.arch.priv_stack_start +
CONFIG_PRIVILEGED_STACK_SIZE +
Z_RISCV_STACK_GUARD_SIZE
The start of the privilege stack should be:
`thread.arch.priv_stack_start + Z_RISCV_STACK_GUARD_SIZE`
Instead of
`thread.arch.priv_stack_start - CONFIG_PRIVILEGED_STACK_SIZE`
For the `end`, use the same equation of `top_of_priv_stack` in
the `arch_user_mode_enter()`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
(cherry picked from commit 7db18ab721)
disco l475 board exposes I2C3 on standard Arduino Uno pins A4/A5,
not I2C1.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
(cherry picked from commit 0f05f58bf5)
Remove working draft status from the v3.7.0 release notes and migration
guide.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds v3.7.0 to the list of supported releases.
The EOL data is currently set as 2.5 years after release
which is the minimum support period we claim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ac52bd629d removed from the
tree some kconfig options which weren't there for a full release.
Let's also not mention them in the release notes so we avoid
broken links.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix a few typos, minor grammar mistakes and simplify grammar
in a couple of sentences.
Also fix indentation in one list.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
No significant changes to 1-Wire master drivers for the 3.7 release.
Only the changes in the pull-up configuration of the zephyr,w1-gpio
driver added in the migration guide.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
As of v2.1.0 TF-M has updated to CMSIS v6 and switched from hosting
the sources to depending on the upstream repository, cloning it at
build time.
To prevent a download from happening during the build, CMSIS v6 sources
are pushed to Zephyr's fork of TF-M and the `CMSIS_PATH` CMake variable
is set to point to them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
These were copied-over from cdc-acm-console by mistake. It's not valid
for this snippet, therefore it's being removed.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add information support for BR key traversal by bt_foreach_bond.
Add information support for NXP IW612.
Change "Added support for NXP platforms." to
"Added support for NXP RW61x.".
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Some HCI drivers issue HCI reset when disabling, like the IPC HCI
driver. We need to keep the RX thread running to allow receiving
the command complete.
This commit postpones aborting the RX thread until this is done.
The issue happens started occuring after commit
d0e75ab87c.
Fixes#76202.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Added Isochronous channels to the controller
Moved Isochronous channels from LE Audio to the host
Changed the LE Audio to refer to the page where
the feature is more detailed described.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For some reason, when the "Supported" coumn of the posix option
documentation included large strings, it would distort the size
of the entire table.
Move blurbs about undefined behaviour and failing with ENOSYS
to a paragraph above the table, so that all tables have a
homogeneous size.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Reorder posix options and option groups so that they are
in alphabetical order in the documentation.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make sure all added (and removed) HCI drivers are mentioned, and also
provide a reference to the new HCI driver API.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
With the new Bluetooth Qualification process the QDID and link to
launchstudio are outdated, remove them.
Also remove the ICS listing as it hasn't been updated for a while.
Instead add a download link to the Zephyr Bluetooth Host ICS file.
Update the documentation configuration script to include the ICS file
(`*.pts`) in the external contents.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
PM_DEVICE_RUNTIME_EXCLUSIVE was deprecated and its behavior
is achived with PM_DEVICE_SYSTEM_MANAGED=n.
Fixes#76037
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Using < > in the kconfig:option role was causing the <_board> section
to be omitted from the rendered docs, and using the role was useless
anyway as the option name was not a real one.
Use the fancy :samp: role instead to achieve the same goal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added links to relevant doc pages when appropriate
Added a mention about PTP
Added a mention about PSA Crypto
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Cleaned up migration guide, mostly fixing single quotes being used
instead of double quotes plus some other minor spelling mistakes.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix indendtation in posix deprecations.
The top-level bullet was indented by an extra space, so remove
the space.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This patch fixes two broken links in the LED strip release note.
:kconfig:option: cannot be used with removed Kconfig options. This
results in broken links. Let's use the code's inline markup delimiter
instead.
It also adds a missing link to the DT compatible of the IS31FL3194
controller.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
This reverts commit a156b619d4.
Now that Sphinx 7.4 is out, it is possible to use webp images
in the PDF documentation (they're converted to png).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commits adds release notes for the 3.7 release for the following
maintenance areas:
* Microchip RISC-V Platforms
* LiteX Platforms
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
A few previously deprecated Kconfig options have not yet been
present for 1 release cycle and can (theoretically) just be
removed, without deprecation (see next commit).
* GETENTROPY
* POSIX_CONFSTR
* POSIX_ENV
* POSIX_SYSLOG
For dependency information, please see
https://docs.zephyrproject.org/3.6.0/kconfig.html#kconfig-search
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make a PR description an expectation/requirement for
pull requests submitted to the zephyr project.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Let's mention this GPL licensed file, even that it
is just a configuration file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Current implementation will not work if comits were not provided.
ie. use case with list of changed files will fail as args.commits is None.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
Treat Bluetooth Classic similar to Bluetooth Mesh and Audio by
not including it in the BT host, as most of the BT Host people
are LE-only.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The API was placed under a non-existing group: coresight_apis. Place it
under os_services, as other debug/ APIs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Correct license identifiers in two files copied from internal Nordic
repositories that were not properly adjusted for Zephyr:
- dts/bindings/flash_controller/nordic,rram-controller.yaml (added in
commit 3a8ee7df91)
- dts/bindings/misc/nordic,nrf-dppic-local.yaml (added in commit
796d09d2a6)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds release notes for Nuvoton Numaker M2L31X SoC, drivers and board
introduced since the last release.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Add migration guide info for the DT property names of the
microchip,ksz8081 binding being changed.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
While doxygen comments on subsequent lines with the `/*<` is technically
valid, it is not standard. It also confuses at a minimum the `vscode`
intellisense provider, which assigns the comments to the wrong enum
values.
Signed-off-by: Jordan Yates <jordan@embeint.com>
After recent nsim SoCs & boards reorganization the SOC_SERIES_*
config is missing for vpx5 SoC which leads to cmake errors
when building against nsim/nsim_vpx5 configuration.
Fix that and align soc series name in soc.yml
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
clarify membership eligibility and need to be a project collaborator,
add references and link to them.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add notes for Nordic HAL and a few more entries for I2S and PWM drivers,
as well as for Nordic SoCs and boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add Infineon CYW20829 SoC and board information to release notes for
Zephry 3.7.
Signed-off-by: Fyall Ian (CSS ICW SW MTO INT) <ian.fyall@infineon.com>
There is one externally visible change which affects
the process of booting the audio DSP from the host,
where dedicated registers are now used to communicate
the boot status instead of using arbitrary memory
locations. This affects the ACE family of audio DSP.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The declaration of statically allocation stacks have been
updated to use another macro, which also unifies both
single stack declaration and array stack declaration.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds some bits on demand paging and eviction algorithm as
the logic of NRU has changed, and LRU introduced.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Docs now start at a high level, discussing sensors, attributes,
channels, and reading data from them.
Followed by more detailed usage guides in how to solve common problems
sensor users may run into.
Additionally renames the sensor_api sphinx tag to sensor
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
It's more than just an API doc and the label was longer than needed,
shorten to rtio as a doc label.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The source files required for this features are not present
in the tree for this SOC.
So if CONFIG_PM or CONFIG_POWEROFF are enabled, there would
be a cmake failure.
Let's just indicate these features are not supported in
kconfig.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Since the kconfig preprocessor functions are under the devicetree
maintainance area, the documentation for them probably should be too.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Adds release notes for notable changes and new sensor drivers introduced
since the last release. Organizes changes by sensor vendor to reflect
similar changes made in the tree.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Apple has released other processors, e.g. M2 or M3, so Apple Silicon is no
longer a synonym of M1.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Make it depend on MBEDTLS_PSA_P256M_DRIVER_ENABLED instead of
selecting it.
This fixes the build of
tests/crypto/secp256r1/crypto.secp256r1.p256-m_raw on filtered-out
platforms since PR #75441 (83cd9f5a01).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
As the items come from the memory slab, their initialization state
can't be guaranteed. This is causing some devices triggering an assert
in p4wq where the item's thread is not null (not zero).
Signed-off-by: Luis Ubieda <luisf@croxel.com>
`struct acl_data` is used even when Host flow control is not enabled.
It is written to through the `acl(buf)` accessor in `conn.c:hci_acl()`.
Hopefully no netbufs were harmed by that :/
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This removes the TF-M CMake warning "Actual TF-M version is not
available from Git repository. Settled to v2.1.0" which always
got triggered because Zephyr's TF-M repo does not have the upstream
Git tags.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a sample that can test various TF-M build options. For now we only
test `CONFIG_TFM_BL2=n` and `CONFIG_TFM_MCUBOOT_IMAGE_NUMBER=1`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fix builds with `CONFIG_TFM_MCUBOOT_IMAGE_NUMBER=1`. The merged binary
should be signed with the same argumements as a secure build, not a
non-secure build, except with a different layout file generated by the
TF-M build system.
Fixes#68345.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Currently, the NFCT pins cannot be used as GPIOs on the nRF54L15 MCU
because the Nordic HAL for this MCU uses the new upcoming `NRF_CONFIG_`
style configuration settings for this MCU.
To support all nRF5x MCUs, the old configuration is still required
because Nordic didn't update their MDK entirely to the new style.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
Since the introduction of HWMv2, boards can have multi-arch SoCs (e.g.
nRF54), so changes to these kind of boards do not have a clear place
now. Simply group all of them together.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Doing duplicates count of bugs, a PR fixing a bug is not a bug report.
Many PRs fixing an open bug are labeled with 'bug' and thuse are being
counted twice.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Current if CONFIG_XIP is enabled, then ALIGN_WITH_INPUT and the align
argument to SECTION_DATA_PROLOGUE are set together, and that is not a
valid option combination; if ALIGN_WITH_INPUT is present, then the
section's LMA alignment is inherited from the previous section, and that
cannot be combined with another alignment option.
The background for this line is in the following commit:
6b3c5e8bb2
Additionally, this is the documentation from ld:
(from https://sourceware.org/binutils/docs/ld/Forced-Output-Alignment.html)
> 3.6.8.3 Forced Output Alignment
>
> You can increase an output section’s alignment by using ALIGN. As an
> alternative you can enforce that the difference between the VMA and
> LMA remains intact throughout this output section with the
> ALIGN_WITH_INPUT attribute.
Signed-off-by: Tavish Naruka <t-naruka@ispace-inc.com>
RISC-V trap entry is handled in soc/common/riscv-privileged/vector.S.
Remove the redundant modification in CLIC driver.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
CLIC should be the first level interrupt controller because it replaces
the basic RISC-V local interrupt.
The interrupt level in CLIC controls preemption between IRQs, rather than
specifying the number of nested interrupt controllers.
Removed CONFIG_MULTI_LEVEL_INTERRUPTS and the incorrect interrupt level.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
A patch was added to the voltage divider to handle an erroneous
negative voltage reading for the nrfx_saadc which could return
negative voltages even though the ADC mode was single ended.
This has now been patched in the ADC driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The NRF SAADC produces negative values in single ended mode if the
positive input is below 0V (ground). This behavior does not match
the ADC device driver API, which states that in single ended mode,
the readings must be positive [0 .. 2^resolution - 1].
This commit extends the adc_nrfx_saadc device driver to track which
channels in a sequence are configured to be single ended, to then
corrects negative readings for these channels to 0.
This patch only works if the ADC resolution is lower than the sample
bit size. This is the case for 8, 10, 12 and 14 bit resolutions for
the nRF 52, 53 and 91 series which store readings in a int16_t.
The nRF 54H and 54L series store 8-bit resolution readings in a 8-bit
sample size. A check has been added to start_read() to prevent single
ended mode readings if the resolution is 8-bit for these platforms.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The DPSRAM ports can run at different clocks, this is the default
configuration, follow the advice in the datasheet and wait 3 nop
instructions before setting the AVAILABLE bit.
It can be observed that when the controller is continuously sending data
to the host, it rarely has a 0-byte transaction instead of a short
packet. The reason for this is not easy to find, it also seems to depend
on the runtime of individual components. This may fix the problem, but
there is no sure proof that this is the solution.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Don't provide __STDC_LIB_EXT1__ macro (Extensions to the C Library,
Part 1: Bounds-checking interfaces) if we use minimal libc - as we don't
have functions from this extension implemented in minimal libc.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `subsys/net/lib` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `subsys/net/l2` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `subsys/net/lib/lwm2m` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
It looks like sample called nrf53_cpunet_enable(false) before any
nrf53_cpunet_enable(true), resulting in asserts due to unbalanced calls
(error propagated from onoff service).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When building `native_sim` with CPP & POSIX enabled, the
POSIX's `unistd.h` header causes a compilation error as
`sys/_timespec.h` doesn't exist in host gcc lib.
Remove the 'zephyr/posix' prefix, and rely on
`CMakeLists.txt`s to do the routing accordingly:
- zephyr/lib/CMakeLists.txt:L11
- zephyr/lib/posix/options/CMakeLists.txt:L8
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add more memory to dma region for cpurad as otherwise it fails
during initialization due to not enough memory for dmm heap.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In function nrfs_backend_send_work tx_data buffer was
used in function ipc_service_send instead of
data_to_send. This is fixed and also tx_data and rx_data
are moved to coresponding functions preventing such
issues in future.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
This patch adds support for the rx-invert and tx-invert device-tree
properties to the uart_lpc11u6x driver for USARTs 1, 2, 3 and 4.
Note that this feature is not supported by USART 0.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Add missing documentation for some defintions in tbs.h
Moved some internal definitions to tbs_internal.h
Removed invalid TBS technology BT_TBS_TECHNOLOGY_IP that
doesn't exist.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add missing documentation for some defintions in gmap.h
Also added missing C++ guards, group and version.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add missing documentation for some defintions in gmap_lc3_presets.h
Also added missing C++ guards, group and version.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add missing documentation for some defintions in bap_lc3_presets.h
Also added missing C++ guards, group and version.
Fixes some formatting.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add missing documentation for some defintions in audio.h
Makes formatting and placement of @brief consistent.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample will print a ping-pong message indefinitely on both,
application (or main) core and remote core. When twister is run in
device testing mode, only one terminal is evaluated (application), so
the regex just needs to account for the application core output, not
remote.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When CONFIG_LOG_OUTPUT is enabled that indicates that logging
strings are used by the runtime logging processing so they should
not be stripped from the binary.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The CPP in ARC MWDT toolchain relies on TLS (THREAD_LOCAL_STORAGE)
so enable it if CPP is selected.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
When 'arch_switch()' switches though Ecall, 'exception_depth' is
incorrectly added to the next thread because the current thread is updated
before arch_switch().
Add 'exception_depth' back to the previous thread when Ecall is called from
'arch_switch()'.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
The `tests/posix/headers/portability.posix.headers.without_posix_api`
test fails to build in case of toolchain which uses minimal libc by
default (for example ARC MWDT toolchain).
It can be easily fixed by providing sighal.h handler in minimal libc
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
remove litex,sys-clock-frequency from litex,clk,
because we already define that in the clock-frequency of cpu0.
This can be accessed via
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
A recent commit fb53d2ef8d ("ace: power: replace pseudo-assembly
movi") contained a bug: the Xtensa "movi" assembly instruction must
be written with the immediate argument already shifted left by 8, the
compiler doesn't do that automatically. This still somehow worked on
MTL but failed on LNL. Fix both occurrences.
Fixes: #75700
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Many ztest macros were not indexed correctly as part of the ztest_test
group, for example ZTEST_SUITE was completely missing in the
documentation.
In addition, document a few macros that did not have any documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an extra workflow step to block PRs with an empty description so that
these gets flagged automatically and reviewers don't have to ask for it.
Add a message in the actual fail step as well so it's easier for the
user to figure out what went wrong, even in the existing compliance
check case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
PR #63973 namespaced generated headers with zephyr/, including generated
syscall headers.
Since then, some new generated syscall header includes have been added
without the zephyr/ prefix, breaking builds when
CONFIG_LEGACY_GENERATED_INCLUDE_PATH is disabled.
This commit adds the zephyr/ prefix to includes for generated syscall
headers where it has been missed.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Before this, stack protection would be effective only after switching to
the first thread.
Even before the first thread is created, the kernel init code uses the
IRQ stack to set things up. Let's make sure this is safeguarded as well.
This also fixes the incompatibility between CONFIG_RISCV_PMP and
CONFIG_RISCV_ALWAYS_SWITCH_THROUGH_ECALL, the later needing an exception
call to switch to the first thread and exception code assuming stack
guard is already set up in the PMP.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit unifies the `renesas,r7fa4m1ab3cfm` compatible string used in
various platforms by making it lowercase for the `arduino_uno_r4` target.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
SARADC was kept enabled to feed RNG entropy peripheral,
adding instability to Wi-Fi connection. So we disable it
before app runs as RNG driver already got initial entropy values.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32-S2 Wi-Fi clock is not initialized properly, causing
instability when scanning or connecting to a SSID.
Fixes#74899Fixes#74417
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In case of minimal libc we have CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE = 0
by default. Some toolchains uses minimal libc by default (for example
ARC MWDT toolchain). Let's set CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE
explicitly so we can allocate memory for environment variables.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
In case of minimal libc we have CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE = 0
by default. Let's set CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE explicitly
so we can allocate memory for environment variables.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
It was pointed out in a future PR that they should have
a corresponding experimental Kconfig entry.
See PR #73795.
This updates the APIs added in PR #73826 and PR #74295.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case no "Connection: close" header is present in the request, the
server should keep the connection open for the client. Hence, after
serving a request, we need to check if the header was present (the
parser sets a flag for it), and only close the connection immediately,
if the client requested it. In case the client remains silent, the
connection will be closed anyway after the inactivity timer kicks in.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allocating FD before pulling the new connection from the fifo can lead
to busy looping in certain cases. If the application keeps calling
accept() on a listening socket after failing to allocate new FD for the
incoming connection, it'll start busy looping, as will report POLLIN in
such case (as the new connection is still on the queue), but it'll
consistently fail with ENFILE.
This can be avoided by trying to allocate new file descriptor only after
new connection has been pulled from the fifo. That way, if we fail to
allocate the file descriptor, the incoming connection will be dropped,
which seems correct given we don't have enough resources to service it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case there were active connections when restarting the server, it
can't be re-initialized immediately, as binding to the server port will
fail. We need to wait for the TCP connection teardown, as even with
REUSEADDR socket option set, binding will fail if the sockets are not in
TCP TIMED_WAIT state (i. e. connections are active).
Because of this, add a configurable delay when restarting the server.
Additionally, make server initialization failures non-fatal, i. e. try
to restart the server again after the delay if the initialization fails.
It's been observed with Chromium, that it tends to keep connections open
even after closing them on the server side (socket lingers in FIN_WAIT_2
state), so the server re-initialization may fail even with delay, so
it's beneficial in such case to keep retrying the server
re-initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case of fatal errors (during poll() or when handling listening
socket), the server operation is restarted. It was missed however, that
sockets opened for the server should be closed in such case.
Additionally, in case there were active client connections, it's needed
to cleanup related resources, otherwise running timers may trigger a
crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
Let's pick a single set of rules and syntax that work for all
toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
Let's pick a single set of rules and syntax that work for all
toolchain.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Since f3e5d9db3d, one needs to define
`LL_EXTENSION_BUILD` to enable exporting symbols from extensions. That
patch added that for `add_llext_target`, but missed it for the EDK, thus
breaking it. This patch fixes that.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
In previous batch of fixes it was overlooked that streams are
HTTP2-specific concept. While for HTTP2 we need to track headers reply
state for each individual stream, at HTTP1 level we need to track this
at the client level. Hence, reintroduce respective flags to track
headers reply state, but only for HTTP1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
find_package() already deals with finding ZEPHYR_BASE, so do not rely on
it being set in ENV, use the variable directly adter find_package() was
called.
Fixes#75387
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch improves the documentation for the llext subsystem, adding
information onhow to configure the llext subsystem, how to build
extensions using the Zephyr build system, and how to load and use these
in a Zephyr application.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The existing index.rst file contains a mix of information about the
llext subsystem and the LLEXT Extension Development Kit (EDK). This
commit splits the existing text into two separate files, index.rst and
build.rst, as a first step on improving the documentation.
No change in text is done in this commit.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Review and improve comments in source code to better describe the API
and the functionality provided by the llext library.
No actual code changes are performed in this commit.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
After configuration, the stream instance is valid and stream's
local_ep valid. bt_a2dp_stream_establish's parameter is stream
too. So in bt_a2dp_stream_establish, stream->local_ep should be
used to tell lower level (AVDTP) the sep.
set_config_param is used by copy-paste mistake.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
These properties are not used by the driver at all, but are
inconveniently marked as required. Lets just remove them.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Profile names MBT and DFU are updated as MBTM and DFUM respectively,
according to TCRL 2024-1.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Even just making minor edits to fcb, warnings are triggered
from Coding Guidelines of the form
Violation to rule 5.7 (Tag name should be unique) tag: fcb
Rename pointer variable names to fcbp.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
If the callbacks are not set, then we cannot do the requested actions
from the broadcast assistant. Since this is a significant issue,
that may prevent the role from working as intended,
LOG_WRN is used other LOG_DBG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The scan_delegator_security_changed function had a few issues
that were addressed:
1) It used an internal field to check level rather than the
value provided by the API
2) It did not treat bt_addr_le_is_bonded as a boolean return value
3) It did not properly truncate the recv state (fixed by using the
proper function bass_notify_receive_state)
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add few missing button codes, these matches the ones used in Linux to
cover HID mouse buttons 1 to 8.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Seemingly newer versions of gcc wrongly detect a variable is used
when it is not set, this is not the case the compiler is wrong,
add a default set to null to prevent the fake warning appearing
as an error in CI
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Fixes an issue with using SMP on devices that do not support
unaligned memory access e.g. Cortex M0 which would result in a
hard fault
Signed-off-by: Jamie McCrae <spam@helper3000.net>
The 14/12-bit variants (AD5692R/AD5691R) require the data to be in the
upper bits of the two byte data field of the write command. See table 12
and the associated footnotes in the AD5693R/AD5692R/AD5691R/AD5693
datasheet.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Fixes the Kconfig for dynamic service registration to make it depend
on dynamic database support instead of selecting it, which prevents
issues whereby it is not actually selected
Signed-off-by: Jamie McCrae <spam@helper3000.net>
DTS binding area was capturing everything under dts/bindings instead of
leaving those to the areas affected.
Remove general wildcard and add some of the missing file filteres in the
relevant areas.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Address the cases where submitter is also the maintainer of the code
changed and other areas are being changed. In this case, assign to the
next area maintainers instead of assigning to submitter.
Example: maintainer of component A introduced significant changes to
area A but also makes changes to other areas B and C. Right now
maintainers of B and C are added as reviewers.
This change will assign to the next area after A, i.e. B in cases where the
submitter is also the maintainer of area A.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix a build error when CONFIG_SPI_ASYNC is set.
The issue was detected by CI
```
spi_xlnx_axi_quadspi.c: In function 'xlnx_quadspi_isr':
spi_xlnx_axi_quadspi.c:489:21: error: 'ctx' undeclared
489 | if (ctx->asynchronous) {
| ^~~
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the busy wait in the MDIO driver that was causing timing
problems in systems with real time requirements performing tasks
more frequently than about a millisecond.
Restructure the code to be less redundant and change the busy wait
kconfig to microseconds instead of millliseconds. Also actually signal
to the mdio driver that it can use the interrupt instead of busy
waiting, this seems to have been forgotten.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Instead of including the boilerplate text and showing it in the created
issue, use comments that are still displayed when editing, but not shown
in the final issue, avoiding confusing and mixup between actual issue
and template text.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a few missing CONFIG_ prefixes to Kconfig option references,
reshuffled the CAN release notes a bit to account for the
can_get_min_bitrate() being both introduced and deprecated within one
release cycle.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Set the remote address of received sockets.
This is necessary for services that rely on the remote address.
DNS relies on the remote address to be set properly.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Added definition MCUX_SDK_SAI_ALLOW_NULL_FIFO_WATERMARK
to fix timeout fault on the I2S_Speed test
using MIMXRT1170_evk/mimxrt1176/cm7.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Calls to other function may clobber ip & lr too so these register need to
be added to the clobberlist.
r3 is not actually used in z_arm_switch_to_main_no_multithreading so it is
also removed from the clobber list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Add a diagram to illustrate a test application's project
components with relationships between Ztest and Twister
objects.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr/logging` and `mgmt`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `include/zephyr/arch` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `include/zephyr/net` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `include/zephyr/dt-bindings` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This tests shows that there is a problematic buffer configuration.
The host locks up when `CONFIG_BT_BUF_ACL_RX_COUNT` is smaller or equal
to the number of connected peers, and all those peers send an L2CAP PDU
that needs re-assembly at the same time.
Although this seems far-fetched, this bug has been observed in a
real-life situation on actual hardware.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Following changes in HCI drivers
(https://github.com/zephyrproject-rtos/zephyr/pull/72323) the build for
the snippet allowing to have the Bluetooth shell run with BabbleSim was
broken.
Fix the snippet by disabling the HCI UART driver.
Add a twister test case that will build the snippet in CI to avoid
silent breaking.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When validating the flash runner configurations in `soc.yml`, the only
SoCs that were considered had to be defined under this structure:
family:
- series:
- socs:
- name: ...
However, the `family` and `series` keys are optional, so the `soc.yml`
files can also be arranged like this:
family:
- socs:
- name: ...
series:
- socs:
- name: ...
socs:
- name: ...
The solution is to move the validation code further down, so that it can
reuse the SoC data that was already correctly parsed while initializing
a `Systems` instance.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Getting the required alignment size for memory region node
and device node needs to be handled by a separate macro.
Otherwise alignment of single byte is reported for any region.
Add a test that checks for this particular issue.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In `lib/posix/options/shm.c` we don't include stdio.h
header but use standard SEEK_xxx definitions (i.e. `SEEK_SET`)
which cause build issues (if the minimal libc is used).
Fix that.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Validate driver in CI by adding the `watchdog` tag to the `mps2/an385`
platform, which uses the driver.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The CMSDK watchdog hardware only supports a single timeout channel.
Return the documented error if more than one timeout is requested to be
installed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The previous calculation was multiplying the timeout in milliseconds
by the clock frequency, giving a cycle count 1000x larger than it should
be.
Fix the calculation and rename `reload_s` to `reload_cycles`, as the
cycle count is what this actually contains.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fixed a few bad or missing documentation parts of iso.h
Also formatted some parts to be consistent with not just
the file itself, but also with bluetooth.h
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove references to new device APIs that are not supported by the
samples. Remove the reference to the UART API from the console sample
because it is not really used there, but add it to the CDC ACM sample.
Fix references in HID, MSC and UAC2 samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add missing documentation to USBD_DEVICE_DEFINE,
USBD_CONFIGURATION_DEFINE and USBD_DEFINE_CLASS macros.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The POSIX macros PAGE_SIZE and PAGESIZE (queriable through
sysconf()) were conditionally defined only if an existing definition
did not already exist. These should be defined unconditionally in their
header to ensure they get the correct values.
If these macros are defined elsewhere with a different meaning, that's a
problem. There was an issue where PAGESIZE was already defined with a
different meaning. See #74623 and #74428.
The POSIX macro ATEXIT_MAX is also conditionally defined and should be
unconditionally defined, but there is currently a definition in picolibc
(picolibc/newlib/libc/include/stdlib.h) so this change will be done
separately.
This commit defines PAGE_SIZE and PAGESIZE unconditionally.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
- Fix formatting in board_antenna.c by using the standard config in
Zephyr.
- Reduce diff with cc1352p1_launchxl/board_antenna.c as much as possible
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- Use antenna switch sky13317 instead of hack
- Base the board_antenna file on cc1352p1_launchxl/board_antenna.c
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Remove an overlay with a wrong name not being picked up,
and change the "A" revision overlay to be used by all revisions.
Also fix the "clocks" property in the overlay causing a fault with sai4.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Updates the minimum version of imgtool to 2.1.0, which is one year
newer than the 2.0.0 release
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
A hard fault occurs when the `sample_echo_packet` function attempts
to print the average time per successful echo and no packets have
been sent, resulting in a division by zero error. This fix adds a check
to ensure that `packets_sent` is greater than 0 before performing
the division. This prevents the system from halting due to a usage fault.
Signed-off-by: Natalia Pluta <pluta.natalia.m@gmail.com>
As found in PR #75525, we should not modify the polled fd array
in multiple places. Because of this fix, the async version of
the socket service could start to trigger while it is being handled
by the async handler. This basically means that the async version
cannot work as intended so remove its support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The symtab test should have the
`CONFIG_EXCEPTION_STACK_TRACE_SYMTAB` enabled. This was not
caught in the CI previously as the regex was also wrong, '['
and ']' are regex syntax and should be escaped.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The intention here appears to be to return an error. Use an early return
to implement this.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Implement the selection of the picolibc source in a Kconfig
choice as they are mutually exclusive.
The following table represents the possible choices, where 'X'
means that `PICOLIBC_SUPPORTED=n` and is guarded in the parent
level as `PICOLIBC=n`, so we do not need to care.
Module Toolchain C++ | Choice
0 0 0 | X
0 0 1 | X
0 1 0 | Toolchain only
0 1 1 | Toolchain only
1 0 0 | Module only
1 0 1 | X
1 1 0 | Toolchain/Module
1 1 1 | Toolchain only
The current implementation favors `PICOLIBC_USE_TOOLCHAIN` over
`PICOLIBC_USE_MODULE` whenever possible, that preference is
maintained in this implementation as well - the TOOLCHAIN
source will be the default choice when the toolchain supports
it or when the C++ is enabled. Otherwise, fallback to MODULE.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add maintainer and collaborator for DP drivers and DAP controller.
Followup on the commit 7c9259abbc
("dap: add CMSIS-DAP compatible controller")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There are instances where on hardware tests would result in
multiple dictionary logging blocks. This is usually due to
flashing and running via twister in separate steps. Once
flashing is done, the device starts running and sending
logging string to output, but twister is not ready to read
them, thus leaving the strings in the host's UART buffer.
Then twister starts its testing run by resetting the device
which results in another dictionary logging block to show
up. So the pytest script has to be updated to only look at
the last dictionay logging block.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since only the UART backend supports output in hexidecimal form
with dictionary logging, so filter for that or else the pytest
would fail due to none, or wrong captured output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit changes the adc_api test to use the proper printf
format specifier when printing the ADC samplings. This ensures
that all values are printed on 16-bit. Without this specifier,
negative values are sign-extended and printed on full integer
size (e.g., 0x8000 -> "0xFFFF8000").
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Remove the reset vector setting from driver layer,
the reset vector is more suitable to be set at the board layer.
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Adds ability to process synchronous requests in an asynchronous
fashion, relying on dedicated P4WQ's and pre-allocated work items.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
In order to support back-to-back readings, it's required that the
RTIO workq threads priority is higher than the caller issuing the
back-to-back requests, otherwise the requests will fail as P4WQ won't
have the opportunity to clear the is_done semaphore, and the subsequent
request will be rejected.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
In order to decouple the read request from its implementation, we need
to be able to yield to potential lower-priority threads, which is not
possible with k_yield() itself. As such, using RTIO Consume semaphore
enables us to achieve this.
This patch also refactors blocking API (sensor_read) to also block upon
consumption, so as not to require RTIO_SUBMIT_SEM enabled.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
- enabled GPT(PWM) peripheral for sleep/deepsleep mode in init_pwm()
- Fixed: undefined behaviour when using k_sleep()
Signed-off-by: Devansh Tanna <devansht0210@gmail.com>
c8d8dce755 introduced a regression whereby driver config should hold
module device pointer, except it didn't.
This commit adds module_dev to the driver config.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When multiple devices are on the bus, and no slave matches
the sent rom, the master receives only ones.
This should be handled explicitly and the error reporting
should not rely on the crc mismatch of the scratchpad.
Note: Make sure that the sensor configuration is loaded to the
eeprom (copy scratchpad), otherwise the resolution will not match
the expectations in case a node looses power and recovers.
As in that case the configuration will not be applied again.
Also the sensor may still report the power on reset value
of +85°C just after the sensor powered up.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
After each read of the scratchpad the crc of the data
is checked and in case of a mismatch an error is returned.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
- Move the content of the header file into the source file,
and drop unnecessary includes.
- Also, drop the bus access function.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
An off by one error in the channel range check results in an out of
bound access to the channel lookup array.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Thalley is not working with BT mesh nor BT classic
and shouldn't be assigned as reviewer for those.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The existing configuration of the ESP32 UART FIFO thresholds
was fixed, leading to inefficiencies in handling
Modbus RTU packages exceeding this size.
This commit introduces two new Kconfig options,
allowing users to adjust the esp32 fifo thresholds as needed.
fixes#74311
Signed-off-by: Omer Gozderesi <omer.gozderesi@enda.com>
config: esp32: configurable UART FIFO thresholds
The existing configuration of the ESP32 UART FIFO thresholds
was fixed, leading to inefficiencies in handling
Modbus RTU packages exceeding this size.
This commit introduces two new Kconfig options,
allowing users to adjust the esp32 fifo thresholds as needed.
fixes#74311
Signed-off-by: Omer Gozderesi <omer.gozderesi@enda.com>
Remove references to a timline for the coding guidelines enforcement
stages. Mark the current stage better and add notes about the
current stage.
Signed-off-by: Simon Hein <Shein@baumer.com>
DTC warning caused by reg address not matching unit address,
but SRAM node address is translated by ranges property anyways.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The unit address didn't match reg which causes the warning, but
flexspi should be part of the peripheral node space anyways.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The information about replied headers or END_OF_STREAM flag are
stream-specific and not general for a client. Hence, need to move them
to the stream context.
For the upgrade case, we need to allocate a new stream now when HTTP1
request /w upgrade field is received. The stream ID in such case is
assumed to be 1 according to RFC.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case client decides to send a trailing headers frame, the last data
frame will not carry END_STREAM flag. In result, with current logic
server would not include END_STREAM flag either, causing the connection
to stall. This commit fixes this logic, so that the server replies
accordingly in case END_STREAM flag is present in the trailing headers
frame.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
CONTINUATION frames are tricky, because individual header fields can be
split between HEADERS frame and CONTINUATION frame, or two CONTINUATION
frames. Therefore, some extra logic is needed when header parsing
returns -EAGAIN, as we may need to remove the CONTINUATION frame header
from the stream before proceeding with headers parsing.
This commit implements the above logic and additionally adds more checks
to detect when CONTINUATION frame is expected. Not receiving a
CONTINUATION frame when expect should be treated as a protocol error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Frame printouts should not be done from the state handlers, but rather
during state transition, otherwise a single frame can be printed several
times as new data arrive. This also simplifies code a bit, as we just
print the frame in a single place, instead of duplicating code.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's really no good reason to have an upper bound on the buffer sizes
and this limits testing in some cases, so just remove them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case RST_STREAM frame is received it should not be ignored, but the
corresponding stream should be closed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case priority flag is present in the HTTP2 headers frame header, we
should expect additional priority fields before the actual frame
content.
The stream priority signalling has been deprecated by RFC 9113, however
we should still be able to handle this in case some implementation
(nghttp for instance) sends them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Data and header frames can contain padding - we need to take this into
account when parsing them, otherwise the stream is broken.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of multiplying function to check header flags, just have a
single one, with flag mask as parameter.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For HTTP2-specific structures and enums, use "http2_" prefix to clearly
indicate the distinction from the generic HTTP stuff.
Additionally, some structures/enums describing HTTP2 protocol details
had "server" in the name, while in reality they describe nothing
server-specific. Hence, drop the "server" part where applicable.
Remove unused macros.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
* Remove unneeded variable.
* Use system utilities to read big endian numbers instead of parsing
manually.
* Remove `payload` member from the http_frame structure. It's not used
for anything useful, and could actually be misleading, as in case of
large frames, where not entire frame is parsed at once it will point
to incorrect location.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If newly introduced interface type is unset then return the first Wi-Fi
interface as a fallback, this fixes backward compatibility.
Also, add NM APIs and use them for type checks, rather than directly
using the type enumeration.
Fixes#75332.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
WPA supplicant as a network manager monitors interface events and
registers to the Wi-Fi NM module, so, adding a check for NM type before
registering the interface is wrong.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
BT_TBS_TECHNOLOGY_IP is not a valid technology value
for TBS since it's not defined by the spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Right now AT+CIPSTART command is called with both "remote port" and "local
port" being set to the same number. This means that for outgoing UDP
traffic (e.g. when resolving DNS or when reaching out some application
server with CoAP over UDP) always the same outgoing port is used. Such
behavior is wrong, since by default a random outgoing port should be used.
Reusing the same port confuses server implementation that is reached out,
since especially in context of DTLS over UDP, outgoing port defines TLS
context/session to be used. Such servers often ignore TLS packets from new
sessions (e.g. after device reboot) and result in failed DTLS connection
attempts.
Commit dbf3d6e911 ("drivers: esp_at: implement bind() and recvfrom() for
UDP sockets") added support for "server-side listening" for incoming
traffic on UDP sockets, which introduced broken behavior of using the same
remote and local port.
In esp_bind() implementation assign newly intorduced 'src' member, instead
of reusing 'dst'. Don't call AT+CIPSTART yet at this stage, as in case of
connect() Zephyr syscall esp_bind() (via bind_default() helper function) is
called implicitly to assign random generated local port, so remote port is
yet to be assigned. Check in esp_recv() whether socket was already
connected (i.e. esp_connect() was called) and if not, invoke
AT+CIPSTART (via _sock_connect()) to start listening on "server-side" UDP
socket.
This patch fixes broken behavior of always reusing the same local port for
outgoing UDP traffic. Instead, randomly generated (by Zephyr net_context
subsys) local port is used. Additionally bind() and recvfrom()
implementation (to handle server-side UDP sockets) is improved, so that
binding to 0.0.0.0 (on any interface) is possible.
Fixes: dbf3d6e911 ("drivers: esp_at: implement bind() and recvfrom() for
UDP sockets")
Fixes: 424ea9f5e4 ("drivers: wifi: esp_at: do not connect socket on
bind(INADDR_ANY)")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The term "section" has a very specific meaning in the ELF file format.
After 709b2e4 ("llext: automatically merge sections by type"), some of
the code that was originally dealing with ELF sections is now handling
"memory regions" made of multiple ELF sections of the same type.
Make sure to use the term "region" consistently in the code and
log messages to avoid confusion with the original ELF sections.
Notable exception to this is the "ldr->sect" array, which is actively
used outside Zephyr and will need to be phased out in the future.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch changes the error codes returned by the ELF subsystem to be
more consistent with the standard error descriptions. In particular:
- issues with the ELF file are now reported as -ENOEXEC;
- valid but unsupported edge cases are reported as -ENOTSUP;
- failures in searching for an entry are reported as -ENOENT.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
llext_load() included a check to ensure that the ELF file contains all
the necessary tables, but it was not functional. Add the missing check
and rename the variable to avoid confusion with the total section count.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The rtc test suite uses timegm to convert a unix
timestamp to datetime, specifically struct tm which has no
nsec field, so the nsec field is not initialized properly.
Update tests to init nsec and isdst members of struct rtc_time.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Disable the pll2 when clearing the clock config prior to
testing the clock_control driver for the stm32h7
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Like in C test. If MAX STDDEV is lower than single clock cycle then
set it to a single clock cycle.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If frequency of the system clock is lower then deviation may exceed
default value (10us). Instead of adjusting the default value, test is
rounding up expected standard deviation to a single clock cycle.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Currently, json array macros are passing the outer "container" struct
to the Z_JSON_ELEMENT_DESCR macro, causing the alignment to be calculated
from the outer struct which may be incorrect. Fix this by using the
biggest shift from the nested objects to calculate the alignment as the
struct size is calculated based on the biggest alignment of it's members.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
Add test to check that alignment and offsets of object array elements
are calculated correctly.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
Previous OpenOCD version finding would fail when additional tokens were
prepended to the 'openocd --version' output, as happens with some third-
party OpenOCD repackages (xPack for one).
Fixes: #71955
Signed-off-by: Nick Kraus <nick@nckraus.com>
This commit removes the "-vvv" argument from the SLID generation
scripts' command line when building Zephyr or an extension with
Kconfig CONFIG_LLEXT_EXPORT_BUILTINS_BY_SLID enabled. This removes
a lot of noise in the build log (usually ~250 lines) and is fine to
do because the printed information is also saved in build artifacts.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr/bluetooth` and `subsys/bluetooth`
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
pollfd array used with zsock_poll() should not be modified while inside
zsock_poll() function as this could lead to unexpected results. For
instance, k_poll already monitoring some kernel primitive could report
an event, but it will not be processed if the monitored socket file
descriptor in the pollfd array was set to -1. In result,
zsock_poll() may unexpectedly quit prematurely, returning 0 events, even
if it was requested to wait infinitely.
The pollfd arrays used by zsock_poll() (ctx.events) is reinitialized
when the service thread is restarted so modifying it directly when
registering/unregistering service is not really needed. It's enough if
those functions notify the eventfd socket used to restart the services
thread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Increase the default TX thread stack size for the CAN loopback driver from
256 to 512 bytes as the former has shown to be too little when using the
loopback driver on real hardware.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If we couldn't send all (or any data) via the socket,
invoke poll instead of blindly retrying and flooding the socket
Signed-off-by: Andrey Dodonov <Andrey.Dodonov@endress.com>
If we couldn't send all (or any data) via the socket,
invoke poll instead of blindly retrying and flooding the socket.
Respect timeout through http_client_req
Signed-off-by: Andrey Dodonov <Andrey.Dodonov@endress.com>
Iterating the observations can be simplified to a struct iterator instead
of first getting the count and looping afterwards.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Some of the A2DP interfaces are not defined if the corresponding feature
is not enabled, and therefore shall not be initialized.
This patchs include the interfaces/variables by the configurations to
go through the compiling stage.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
When NO_BACKENDS was not defined then log backends were
initialized (even though not used). During the initialization
filters for that backends were configured and because of that
messages were not filtered out as expected.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
When userspace is used and frontend was used for logging then runtime
filtering was failing because in user context filtering data was
accessed and filtering data is in the kernel space. Fixing that and
adding runtime filtering to the pre frontend function which is
already executed in the kernel space and filter data can be
accessed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Logging string stripping depends on LOG_DICTIONARY_SUPPORT being
enabled and it was not set in UART dictionary frontend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Log frontend supports runtime filtering so it should be
allowed to enable it even when only frontend is used with
no backends.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Use the message queue to pass the new report from the input callback,
and use a semaphore to protect the report buffer until it is transferred
to the host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Starting next week, I will no longer be active on this work account,
& I will no longer be available to contribute to STM32 in Zephyr.
I will be reachable on my personal account: @JarmouniA
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
From https://mails.dpdk.org/archives/dev/2021-December/231212.html:
Downcasting a void* to struct aesni_gcm_session* caused the session
data to be treated as tainted. Removing the void* temporary variable
and adding a cast avoids this issue.
Try the same approach here to prevent the ldr->sect_hdrs pointer from
being treated as tainted.
May fix#74817.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Previously both temperature and pressure were updated regardless of
which one was requested.
Fixes CID: 392519, GH: 74779.
Fixes CID: 392497, GH: 74777.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
If CONFIG_NET_MGMT_EVENT_DIRECT is enabled and CONFIG_NET_MGMT_EVENT_INFO
disabled it does not build because mgmt_push_event writes to non existing
struct members
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
Fix system workqueue block caused by mgmt_event_work_handler
when CONFIG_NET_MGMT_EVENT_SYSTEM_WORKQUEUE is enabled.
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
The series-specific Kconfig files were not included, leading
to RTT not being considered available.
Fixes#75511.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
During initialization, zero is returned if an unexpected device ID is
read because the returned variable is not written to after a previous
non-zero check. Return -EIO instead to indicate an error occurred.
Detected with the following Coccinelle script:
@@
identifier I;
@@
*if (I) {
...
return ...;
}
if (...) {
... when != I
when any
* return I;
}
Signed-off-by: Jared Kangas <kangas.jd@gmail.com>
Currently we get the build error when building
'tests/subsys/logging/log_backend_uart':
error: static_assert expression is not an integral constant expression
BUILD_ASSERT(strlen(TEST_DATA) < SAMPLE_DATA_SIZE);
~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It can be easily workarounded by using sizeof instead of strlen
to calculate string size.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
In `tests/subsys/logging/dictionary` we don't include stdio.h
header but use standard stream definitions (i.e. `stdout`)
which cause build issues (if the minimal libc is used).
Fix that.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Disable branch coverage for the `__ASSERT` family of macros. Covering
all of the assertion branches by definition means triggering the
assertion, which can be either challenging or impossible to exercise,
and in either case results in the immediate termination of the test.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Multiple values for `--exclude-branches-by-pattern` will result in only
the last value taking effect. Resolve this by merging all the provided
regex patterns into a single pattern with the `|` operator.
Signed-off-by: Jordan Yates <jordan@embeint.com>
In case where the system is overloaded, net stack buffer
could fail to allocate next packet. That scenario requires
wifi internal Wi-Fi driver to free current rx buffer. This is
currently not being called. This fixes it by making sure
esp_wifi_internal_free_rx_buffer() is called in all scenarios.
Fixes#63043
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Converts the `<inf> i2c_ll_stm32_v2: I2C TIMING` message
displayed by the driver to a LOG_DBG. Also makes an actual
error message a LOG_ERR instead of a LOG_DBG.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Note CONFIG_PM_* affects device.h too. Even if not compiled, the more
code the pre-processor sees the better.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fixes the following error appearing in the test coverage added by the
next commit:
In file included from zephyr/tests/lib/cpp/cxx/src/main.cpp:18:
```
zephyr/include/zephyr/pm/device.h:275:9: error: designator order for
field 'pm_device_base::state' does not match declaration order
in 'pm_device_base'
275 | }
| ^
zephyr/include/zephyr/pm/device.h:315:17: note: in expansion of
macro 'Z_PM_DEVICE_INIT'
315 | Z_PM_DEVICE_INIT(Z_PM_DEVICE_NAME(dev_id), node_id,
```
Note this failure is observed with any g++ -std=c++NN standard value -
even before C++20.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This provides C++ build test coverage for device.h (notably:
Z_DEVICE_INIT() fixed in the previous commit) and for some other Device
Tree macros.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Conditionally remove braces for designated initializers of anonymous
unions. This makes it compatible with C++20 while not breaking pre-C11
gcc.
This does for device.h what commit c15f029a71 ("init.h: restore
designated initializers in SYS_INIT_NAMED()") did for init.h
See https://docs.zephyrproject.org/latest/develop/languages/cpp/ and
long discussion in #69411 for more obscure C/C++ compatibility details.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The minimum version of pyelftools is 0.29 to make it working
with scripts/footprint/size_report
Fixes#75605
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
RTIO expects the CHAINED flag to be set when ordering of operations is
important. The callbacks in the icm42688 stream handling were not
chained into, meaning the callbacks would have occured immediately
rather than *after* the SPI reads/writes.
Update all the spi transactions to chain into the desired callbacks in
the driver.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
When multithreading is off packet buffer should not use feature which
allows waiting for available buffer.
mpsc_pbuf is used by logging which can work in deferred mode in
no multithreading build.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Updated nxp lpadc driver, because the phandle type property
'nxp,reference-supply' was removed, and a new phandle-array
type property 'nxp,references' added.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Add new property 'nxp,reference-cells' for vref node.
Remove lpadc nodes 'nxp,reference-supply' property.
Add new property 'nxp,references' for lpadc nodes.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Add specifier cells for nxp vref, when some other
peripherals use the vref to provide reference voltage,
this cells can be used to pass-in vref target voltage.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
With new BT SIG Qualification Workspace it is no longer possible to
export/import full project. Only ICS export/import is possible.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Adds missing i2c_sleep pins configuration definition required
to properly support power management operations for
Smartbond I2C controller on da14695_dk_usb board.
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
When CONFIG_NET_STATISTICS=y is enabled, build fails
due to wrong interface pointer.
Fixes#75515
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make sure that the ATE metadata does not overflow the sector size.
Take into account the data length and also the mandatory reserved ATEs
in each sector.
Signed-off-by: Adrien Ricciardi <aricciardi@baylibre.com>
Instead of silently `#undef`ing PSA_CRYPTO_C when TF-M is in use,
enforce that rule at the Kconfig level.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Replace platform_allow with integration_platforms, what allow CI to
build samples on all platforms with test feature 'usbd' but still limits
number of platforms when it is invoked with the --integration option.
Replace/add some platforms that already have test feature 'usbd'.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The broadcast sink sample no longer treats the broadcast_code_received
semaphore as a boolean.
Fixes#75469
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
risc-v idle call is being fetched from arch/ implementation.
This soc file is not used and can be removed.
Fixes#75540
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
- Added a flash runner configuration for rw, mcx, lpc, kinetis and imxrt,
used for sysbuild multi-image projects like MCUBoot.
- Solved the mass erase issue.
- The sysbuild project "west flash --erase" command caused
the mass_erase->flash_img1->reset->mass_erase->
flash_img2->reset sequence.
It was fixed to the mass_erase->flash_img1->
flash_img2->reset sequence.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When using an encrypted broadcast, the previous value is no
longer enough and caused a stack overflow.
Slightly increased the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some public API functions do not modify the net_buf instances and can
declare these arguments as const.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adding a semicolon after the do-while loop in the LV_DEV_INIT()
macro also supports multiple instantiation.
Signed-off-by: Stephan Linz <linz@li-pro.net>
This removes the prompts for the mt8195 and related kconfigs,
so these cannot be overridden from command line (though
technically they cannot be disabled as they are being selected).
This also prevents them from appearing in the build .config
file as not being set even when we are being for other SoCs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Reorganize the EEPROM periheral documentation to make room for subpages
with additional details. Add a page describing the EEPROM shell module.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `kernel` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
exclude cyw920829m2evk_02 from build. For cyw920829m2evk_02
need `west bloobs fetch` (to get BT fw), which does not
allowed in CI.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Add document for boot M7 Core by using Linux remoteproc to address
some known issues when boot DDR Zephyr kernel.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Fixes: #75390
A wrong bit mask (wrong: IOMUXC_SW_PAD_CTL_PAD_PUS_MASK = 0x8) was used.
That bit mask is for PUE/PUS-type gpio registers, but this is the
section for registers with alternative PULL (PDRV) type layout.
Right bit mask: IOMUXC_SW_PAD_CTL_PAD_PULL_MASK
Signed-off-by: Nils Larsen <nils.larsen@posteo.de>
When syncing to a PA using PAST then the sync_info.recv_enabled
was always just set to true, regardless of what mode was set
during the subscribe parameters.
The mode(s) are now stored in an array (with the default value
as well) so that we can retrieve that information when the PA
has synced via PAST.
It was considered to put the `mode` value into the `bt_conn`
struct, but that would require an API change as the `bt_conn`
parameter for the subcribe function uses `const`.
This commit also modifies the guard for PAST to be the more
correct value CONFIG_BT_PER_ADV_SYNC_TRANSFER_RECEIVER instead
of just CONFIG_BT_CONN.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Don't zero initialise the static data structure, as statics are
explicitly initialised to 0 per the C standard, and checkpatch normally
complains about the pattern.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Return the documented error if `wdt_install_timeout` is called after
`wdt_setup`, instead of triggering the state assertion inside of
`nrfx_wdt_channel_alloc`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Return an error code if `wdt_feed` is called before `wdt_setup`, instead
of triggering the state assertion inside of `nrfx_wdt_channel_feed`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Some AMP native simulator targets (like the nrf5340bsim net core)
will not produce a final executable if only one of the core images
is built, when IPC is enabled, as those images require the other
core image to be able to link.
So this test cannot be run when targetting that core alone
(without using sysbuild to build the other).
Let's filter out these targets to avoid twister building
but finding itself with no executable and error out badly
as it cannot run the test.
The filter condition is effectively:
If building for a native target, there must be an .exe being
produced.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Ensure that we call the host libC when allocating space
for a possible set of test arguments even if we are
building Zephyr with an embedded libC.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix (unlike native_sim) or its breathen (NATIVE_APPLICATION)
link together the "runner" code and the embedded code.
This means that when CONFIG_STATIC_INIT_GNU is set,
any host library code (like the llvm fuzzer) constructors will get
postponed to the Zephyr initialization.
These libraries are unlikely to work if we do this.
(the llvm fuzzer does not)
So let's instead not enable STATIC_INIT_GNU for these targets.
This means possible embedded library constructors will continue to be
picked during the link and be still called during the native runner
initialization instead of during the Zephyr OS initialization as they
were just before we introduced STATIC_INIT_GNU in
6e977ae2d5
Note that native_posix will be deprecated shortly and its users
are strongly encouraged to move to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `include/zephyr/drivers` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Increase the number of network packets and buffers for better TCP
performance in the sample out-of-the-box.
Decrease the network buffer data size for better buffer management in
the sample (less buffer space wasted for L2 header). The only drawback
of this is reduced TCP TX performance, but less than 2 Mbps in my case.
Finally, enable speed optimizations for another small performance boost.
As the RAM requirements of the sample now increase considerably in the
default configuration, add a note in the readme file about it, and how
to make it fit into smaller boards.
Tested on nucleo_h723zg:
Before (current defaults):
UDP TX RX
76.47 Mbps 93.48 Mbps
TCP TX RX
76.18 Mbps 67.75 Mbps
After (new defaults):
UDP TX RX
76.08 Mbps 93.62 Mbps
TCP TX RX
74.19 Mbps 85.51 Mbps
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The bug should be fixed now, so it possible to have it enabled as
long as OTS is not registered with the feature flag.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The checks for callbacks in bt_ots_init did not correctly take the
ots_init->features.oacp into account for all callbacks, which
caused some issues.
Slightly optimized the check for ots->cb->obj_read by moving the check
and reducing the number of places the code calls oacp_read_proc_cb.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Allocating a buffer in the system workqueue thread should never
be done wiht a K_FOREVER as that may block the thread forever.
Replace the K_FOREVER with a K_NO_WAIT and slightly modified
the function to handle this case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Target SSID buffer might not be NULL terminated, so use memcpy() instead of
strncpy() for copying it from temporary (AT response fragment) buffer.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Close file descriptor returned by accept() in error path of
nsos_adapt_accept(), so that file descriptor is not leaked.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit fixes a bug with the declaration of the Kconfig option
MEMC_STM32.
The option is defined in two files:
- `drivers/memc/Kconfig.stm32`, wich depends on
- `MEMC`
- `DT_HAS_ST_STM32_FMC_ENABLED`
-`soc/st/stm32/Kconfig.defconfig`, wich depends on
- `MEMC`
- `SOC_FAMILY_STM32`
So, if you have `CONFIG_MEMC=y` in your Kconfig options and you are on a
STM32 SoC, `CONFIG_MEMC_STM32` will be enabled, even if there is no
STM32 FMC enabled.
This Kconfig option causes the driver for the STM32 FMC to be compiled,
regardless of the presence of an enabled node for the FMC.
However, the driver fails to compile if there is no FMC node in the
devicetree. So, if you compile a project with `CONFIG_MEMC=y` on a board
with an STM32 SoC and no enabled FMC, the build will fail.
This commit deletes the Kconfig declaration in the `Kconfig.defconfig`,
as it isn't useful and is the one provoking the bug.
It also add in the `Kconfig.stm32` the compatible `st,stm32h7-fmc`, wich
use the same driver and so need to be enabled by the same Kconfig
option.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
The subscribe parameters shall be a struct that has previously
been subscribed to, as it works as a linked list.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently the code in soc.c depends on the MMU of the CPU being enabled,
but this is not enforced. It is thus possible to cause a build error by
manually disabling it (as is required for some LLEXT tests, see #75289).
Make sure this is averted by explicitly selecting ARM_AARCH32_MMU in the
SoC Kconfig.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add the usbd test tag to few ST boards, this should be picking a board
for every variation of the HAL file (checked for #define USBD_FS_SPEED),
so it should catch any inconsistencies between HALs.
There should be one for each of: f0 f1 f2 f3 f4 f7 g0 g4 h5 h7 l0 l4
l5 u5 wb.
Nothing for l1, can't find any boards with a USB port.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fixes#71761
The `west boards` command parses extra BOARD_ROOTs from Zephyr modules,
so that the boards defined in those modules are automatically listed.
In HWMv2, OOT boards can be described in terms of OOT SoCs, which means
that extra SOC_ROOTs must also be provided. Otherwise, an error message
will be displayed when attempting to list all boards. Therefore, every
Zephyr module SOC_ROOT should be included as well.
In HWMv1 (deprecated), OOT boards can be defined in terms of OOT archs,
but module ARCH_ROOTs had never been included automatically. The fix for
this is long overdue, but it's included for symmetry.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Currently, `PICOLIBC_SUPPORTED` could be enabled even when
neither the toolchain has picolibc nor the picolibc module is
present, this can be the case when Zephyr is built with
external toolchain (non-Zephyr SDK) + external build system
where PICOLIBC module doesn't exist.
Fix this by having `PICOLIBC_SUPPORTED` depends on either
toolchain OR module, while taking the libc++ into
consideration.
Here's the full logic table of when the PICOLIBC should
be marked as supported.
libc++ TOOLCHAIN MODULE PICOLIBC_SUPPORTED
0 0 0 0
0 0 1 1
0 1 0 1
0 1 1 1
1 0 0 0
1 0 1 0
1 1 0 1
1 1 1 1
Co-authored-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Since `PICOLIBC_USE_TOOLCHAIN` is available only if
`PICOLIBC` is enabled, it doesn't need to depend on the latter
again.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
In case underlying TCP/TLS connection is already down, the
websocket_disconnect() call is expected to fail, as it involves
communication. Therefore, mqtt_client_websocket_disconnect() should not
quit early in such cases, as it could lead to an underlying socket leak.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Several log statements were using the regualar LOG_DBG,
but when ISO is actually used, those were called every TX
which at 10ms SDU intervals would fill up the log really fast
and not provided much value outside of some specific debugging.
Modified those logs to use BT_ISO_DATA_DBG which is another
log level for ISO data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The top-level driver comment states that a uint16_t is used to store
changes if the EEPROM size is smaller than 64kB, or uint32_t otherwise.
However, the 64kB threshold is represented as 2^16 in the actual code,
which is a bitwise XOR instead of an exponent. This causes a uint16_t
to be used only if the size is less than or equal to 18 bytes. Correct
this by using KB(64) instead of 2^16.
Signed-off-by: Jared Kangas <kangas.jd@gmail.com>
Sets the property `PROPERTY_OUTPUT_FORMAT` to `elf32-bigarm` when
`CONFIG_BIG_ENDIAN` is set to `y`.
Signed-off-by: Sigmund Klåpbakken <sigmundklaa@outlook.com>
When this bit is not set, it defaults to 0 (little endian). This
causes issues for big-endian devices, as data will be accessed using
little endian.
Signed-off-by: Sigmund Klåpbakken <sigmundklaa@outlook.com>
When switching off memory banks we cannot use movi with arbitrary
immediate arguments, they will be converted by the compiler to memory
accesses. Only constants within the allowed range should be used.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Some hardware takes longer to boot before any output is visible
from the app. So lengthen the initial timeout on waiting for
any output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When doing device testing, there may be some other characters
being printed before the dictionary logging header string.
Also the delay boot banner may also be there. So change
the regex to ignore those them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With sysbuild, the test app is actually built under another
layer of directory where the dictionary JSON file will reside.
Instead of simply using dut.device_config.build_dir, use
dut.devive_config.app_build_dir instead, which takes into
account of that.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The rationale behind that change is that the Application can use the
`bt_conn_le_param_update()` API to signal the controller to reschedule
the link.
Even if the new connection params are within the old ones, the
controller would be free to choose an e.g. smaller interval. The host
API should not prevent this usage.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/74292
Co-authored-by: Knut Eldhuset <knut.eldhuset@nordicsemi.no>
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix missing CONFIG_ prefix for log format section strip check.
Logging was still operating on invalid flash addresses.
Fixes#75161
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
This test verifies a convoluted interaction between the scanner and the
resumable advertiser feature in the host.
That feature is going away, see #72567.
Prepare that work by removing this test that's in the way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
EVENTFD is not anymore compatible with these targets so let's
disable them with this sample to avoid a failure in twister
otherwise.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Only disable TCP/UDP software checksum if the ethernet
driver enabled. This is to avoid interfere with net tests
which don't need the on board driver to function
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Remove d0i1 and change threshold for d0i2 to 10ms for pm setting
according to the requirements to pass CTS for chrome projects.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
I am the original author of the test that is being removed. The test was
added in https://github.com/zephyrproject-rtos/zephyr/pull/70670 to try
to specify the behavior of automatic advertiser resuming in the Host.
It turns out now that the behavior of this feature depends on which
Controller is in use and can fail incorrectly.
The test assumes the DUT will be able to create `CONFIG_BT_MAX_CONN`
peripheral connections. But this is not necessarily true. E.g. Some
Controllers, like the SoftDevice Controller, may reserve some Host
connection slots for central roles, making the max number of peripheral
connections smaller.
In conclusion, the test is not correct and should be removed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Update zephyr-app-commands to generate "west build --shield ..." for west
invocations using shields while still generating "cmake .. -DSHIELD=..."
if the tool is set to "cmake".
Updated the various shield documentation pages to recommend using
"--shields" over "-DSHIELD" to match the results of the corresponding
zephyr-app-commands code snippets.
Add proper support to zephyr-app-commands for specifying multiple shields
(using a comma-separated list) and fix a few invocations to use this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Solves two identical issues listed below:
Issue 1: I2C scanner example for DesignWare hardware gets stuck
indefenitely resulting in system hang up.This is because DW I2C driver
does not handle 0 byte transfer correctly which is the case for I2C
scan example.
Fixed it by overwriting the msg length to 1 if it is 0 and the
buffer is not NULL.
Issue 2: Similarly, if the I2C pins are not pulled up (nothing connected
to I2C pins), the DW hardware does not actually send the data
(assuming contention on the bus) hence not releasing the semaphore
resulting in calling thread waiting forever.
Fixed it by adding a timeout to k_sem_take call and return error if
cannot successfully acquire it.
Tested scenarios where nothing was connected on the bus and saw the
I2C scan example complete the whole scan command. Then connected
two different sensors on the I2C bus and saw both the address on the
console. Tested both the uses cases on Raspberry Pi Pico.
Fixes#70332.
Found that micropython tackles the same issue by implementing I2C scan
commands with Soft I2C because the same reason mentioned in Issue 1.
Signed-off-by: Dev Joshi <quic_devbhave@quicinc.com>
Fix ism330dhcx_gyro_fs_map[] and ism330dhcx_gyro_fs_sens[] arrays
initialization in order to be able to correctly convert from dps
to register raw value through the array index.
Fix: #72617
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Loop inside the odr array until we find the first
value which is "<=" (amd not "==") the argument.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
- Defined 'api_configure' function outside of
'CONFIG_UART_USE_RUNTIME_CONFIGURE' macro because it is the only
configuration function and used in device initialization function.
- Removed unnecessary 'IF_ENABLED' part.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Upgrade the CI image for x86 macos from 12 to 13, this is apparently the
latest "free" x86 macos runner that will be supported, let's switch to
it until it gets deprecated.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There are 2-level switch statements (one switch inside another) which were
not properly terminated with 'break' statements, leading to implicit
fallthrough. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The first page frame index was reserved for head and tail ^pointers.
However there are cases where the first frame is actually made
evictable and would trigger the assertion guarding against that.
Fix this by applying an offset to actual frame indexes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit makes the RV32M1 SoC rely on the default behavior of relying on
the `CONFIG_RISCV_ISA_EXT_*` config options, and removes the
`zephyr_compile_options` override when the standard toolchain is used.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
According to the RV32M1 Series Manual, Rev 1.1 RV32M1 series supports the C
extension, and doesn't support the A extension. Apply fixes accordingly.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Issue:
When there are two similar SSIDs (e.g. MySSID and MySSID_Guest),
the current implementation may use the wrong (truncated) SSID
for the connection. See issue#74910 for details.
Fix:
Updated airoc_wifi_scan_cb_search to filter all SSID where
length is different than the user-entered SSID.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This introduces a high-level summary of the most notable changes in 3.7.
This also tries to capture the most useful changes since previous LTS.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
We only need the interface to be administratively up, the operationl
status is managed by the WPA supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Due to recent changes to hostap, the stack usage is increased, so,
increase the stack size to fix SoF.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes build issues when Wi-Fi security is enabled for default
implementation, the alternative implementation is managed separately,
and doesn't need these.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes an issue whereby multiple boards would be grouped when using
a regex to group them, and adds missing nRF91 entries to the list
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The power_down() function attempts to lock the hpsram_mask on-stack
variable in data cache, which causes an exception. Moving it to .bss
by making it static fixes it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
During channel reads, zero is returned on CRC mismatches: the returned
error variable is not written to after a previous non-zero check. Return
-EIO to mirror other drivers' checksum validation behaviors.
Signed-off-by: Jared Kangas <kangas.jd@gmail.com>
The existing state checks for both the broadcast sink
and broadcast source only ever checked the first BIS.
This sort of made sense, since they are all linked by HCI
(i.e. they share the same state), but there is a race condition
in the ISO and BAP callbacks that could allow applications
to delete sinks and sources before all the ISO callbacks
had been handled.
By treating the sink and source states as the highest value
of the BIS, then we better treat all BIS the same.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit removes the const qualifier from TX (source) buffer
of the chan_blen_transfer DMA test to ensure it gets placed in
RAM rather than flash. This ensures the test can pass on hardware
where the DMA controller is unable to access flash.
Fixes#75125.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Make sure to check return values of mbedtls hmac APIs so that
the digest is calculated properly.
Fixes#75259Fixes#75260Fixes#75261
Coverity-CID: 366271
Coverity-CID: 366277
Coverify-CID: 366279
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The README "Testing CANopen Program Download" section needs a sysbuild
MCUboot option. Otherwise only the application is built and the test will
fail.
This has probably been missing since commit
238d113185.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Adds the icm42688 devicetree binding changes to the migration guide
noting that the previous bindings were not at all in use.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The gTest harness asssumed that the lines end with the test name, but
some gTest implementations include the test duration in the line. Update
both the tests and regex to allow this and also avoid capturing
characters into the `test_name` that cannot be valid test name chars.
Fixes#72318
Signed-off-by: Yuval Peress <peress@google.com>
Add information about these missing Kconfig options:
CONFIG_NET_CONFIG_MY_IPV6_ADDR
CONFIG_NET_CONFIG_PEER_IPV6_ADDR
CONFIG_NET_CONFIG_MY_IPV4_ADDR
CONFIG_NET_CONFIG_MY_IPV4_NETMASK
CONFIG_NET_CONFIG_MY_IPV4_GW
CONFIG_NET_CONFIG_PEER_IPV4_ADDR
Fixes#75211
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows specifying the environment variable
ZEPHYR_DOXYGEN_OVERLAY pointing to a overlay file for
doxygen to override configs in the base zephyr.doxyfile.in
for local document builds.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Boards that use 1024 byte EEPROM buffers need 16-bit address widths
otherwise eeprom_target driver will cause build failure.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Existing tests fail when 16-bit address width is used. Adjust the code
to support 16-bit addresses as well.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Seems like not all stm32 devices define USBD_HS_SPEED in the HAL, only
check for USBD_HS_SPEED if defined. Fixes a build failure with the new
stack on F1 MCUs.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In fixed-link mode, mdio remains unconfigured. This results in a null
pointer dereference, triggering a bus fault
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
This is a bug-fix:
When upper layers want to send something, they add a `conn` object to a
list. They do so by adding a node on `struct conn` rather than the object
itself.
We forgot to increase the reference count of the connection object when
doing so. This means that there can be a scenario where the conn object is
destroyed and re-used while still being on the TX list/queue.
This is bad for obvious reasons.
This patch fixes that by:
- increasing the refcount when putting on the TX list
- decreasing the refcount *only* when popping off the TX list
- passing a new reference from `get_conn_ready` into `bt_conn_tx_processor`
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The DHCP server can distribute DNS addresses, hence enable DNS resolver
in the sample to show this functionality.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently used DHCP server in the sample, dhcpd, is no longer maintained
and reached EOL. Therefore, update the sample's readme file with a
sample configuration for its successor, kea.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Macros like `BIT()` & `BIT64()` from the `util_macro.h` are
used, include their header to compile properly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
If we have configured the DNS dispatcher to be only as a
responder but receive a query response, or if we are only
as a resolver but receive a query, then the dispatcher just
ignores the packet and returns -ENOENT.
Unfortunately we print an error message in this case
[00:10:18.818,000] <err> net_dns_dispatcher: DNS recv error (-2)
which is totally unnecessary and causes confusion so do not
print an error message in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update the description of the `INCLUDE_RESET_VECTOR` Kconfig so
that it is more clear to the user what it does.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
For SOCs that do not implement a custom `__reset` function,
select `INCLUDE_RESET_VECTOR` so that Zephyr provides a default
implementation that simply jumps to `__initialize`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Increase the default SDO timeout for the CANopen program download west
runner from 0.3 seconds to 1 second. Depending on the flash size and speed,
a full erase may take slightly longer than 300 ms.
The timeout can be customized by using the --sdo-timeout runner parameter.
Fixes: #73987
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix preprocessor expression for custom vector table due
to OS timer isr being needed. The parentheses are missing.
Also add RW6xx to the list which has the same isr needed for ostimer.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The current version of scipts do not consider OOT boards use cases and
the tests with robot now are strict to only one robot file, which is
not realistic for real environment. This address those issues and allow
multiple testsuits at command line and lists at tests entries. It add
another test parameter to allow configure robotframework options.
Fixes: #74563
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
cpuppr can only use slow peripherals and uses RAM3 as RAM so
it does not need to use DMM.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
After changing dmm to not apply data cache line alignment for all
regions test needs to be aligned.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
DMM was enforcing cache line alignment all memory regions, including
those which were not cacheable. Fixing it by using memory attribute
from the device tree to determine if alignment needs to be applied.
Because of that memory usage was significantly increased because
even 1 byte buffers (e.g. for uart_poll_out) was consuming 32 bytes
(cache line size).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Replace the condition-less `for` loop (`;;`) in `get_child_of` with
a `while (true)` loop and remove the redundant `return NULL;`
at the end, which is never reached.
This change aims to enhance readability since `while (true)` is better
suited for this scenario.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Update documentation, mainly to clarify use of onboard KitProg3 debug
adapter and Infineon custom OpenOCD.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Test was using a configuration which enforces cache management in the
packet buffer. However it shall not be used if producer and consumer
is the same core. Testing this configuration on a single core does
not make sense as it actually fails on cores with data cache.
Making this configuration build_only so it is checked against
compilation errors.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Packet buffer can be used for sharing data between cores. In that
case when any core has data cache then data cache handling must
be enabled in the module. However, it shall never be enabled when
the packet buffer is used on a single core. Adding that information
to the documentation.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A function, such as CDC ECM, can set the ZLP flag to handle a
class-specific protocol. This is not to be confused with the ZLP role in
control transfers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Ignore changes to the CANopen program download west runner in CI.
This script is only executed when performing a DFU using the CANopen
protocol via CAN, which is never triggered in CI anyways.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remake the Zephyr Generic audio framework (GAF) figure to a graphviz
version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Generic audio framework (GAF) figure to a graphviz version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Bluetooth Audio Architecture figure to a graphviz
version. This makes it easier to modify it directly in the
.rst file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the metadata length is 0 in the mod source operation,
we set the length to 0 and memset the stored value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add cast to NSEC_PER_SEC macro to correctly check offset.
Prior to this commit, the would eval to true incorrectly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Move the GitHub runners currently on macos-11 to macos-14 as the former is
no longer supported by GitHub.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Check if node identifier is valid to define and initialize device
metadata. Without this patch, "software devices", ie, DEVICE_DEFINE,
would fail to compile when enabling the device metadata feature.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Problem:
When flashing a multi-image project with STLink through sysbuild,
the flash utility is told to erase the whole flash between each
single image flash.
Resulting in a partial flash where only the last image is effectively
stored on flash...
Correction:
A `west flash` must not implicitly perform a mass erase on its own.
If a flash erase is required, the option has to be passed manually.
The problem is discussed in the following issue:
zephyrproject-rtos/zephyr#69582
Due to CI tests errors, the correction is not applied on
eval board `b_u585i_iot02a`.
See following issue:
zephyrproject-rtos/zephyr#75164
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
For STM32H7, U5 and WBA, check the LDORDY bit of the ADC ISR register
after enabling the internal regulator. This method is safer than the
delay.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Previous commit 8defc560fe forgot
to add valeriosetti also in "West project: mbedtls". This commit
fixes this.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add missing pull-up for RX pin in nrf54h20dk dual uart configuration.
Lack of pull-up was causing test failures.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Currently imx8mm/n use pinctrl binding of nxp,imx8m-pinctrl.yaml which
is used for imx8mq series platforms, but imx8mm/n have different pinctrl
hardware module with imx8mq, so change imx8mm/n to use binding of
nxp,imx8mp-pinctrl.yaml as imx8mm, imx8mn and imx8mp have the same
pinctrl hardware module.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
As of recent update of stm32f7 HAL to cube version V1.17.2
the workaround for misspelled HAL_ETH_PTP_CONFIGURATED macro
is not needed anymore, and causes PTP support to fail to compile.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
SYSTEM_WORKQUEUE_STACK_SIZE increase is required to fix not
only BLE Ext Adv (70935), but also other BLE use cases according
STM32WBA HCI driver
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
STM32WBA55 BLE Extended Advertising issue (70935) fixed
using a correct BLE Controller configuration.
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
The KBS_KSOH1 register contains both keyboard and GPIO output settings.
Not all bits are for the keyboard will be driven, so a critical section
is needed to prevent race conditions.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
List USB device and USB device "next" as supported on the NXP
LPCXpresso55S16 (which uses dedicated USB RAM) and LPCXpresso55S36 (which
does not use dedicated USB RAM).
This allows testing these two implementations during CI runs.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Make sure that captions (tables, figures, ...) can be properly
seen on both light and dark them by setting their text color
to the default "body" color.
Fixes#73190.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Setting the number of memory wait cycles must take place while the clock
is set to 32MHz or less. This patch ensure the MEMWAIT register is
changed before the clock is changed from its default value (of 8MHz).
Note that in order to set MEMWAIT to 1 the power control mode must be
set to high speed (which is why the lines of code interacting with the
OPCCR register have also been moved).
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Instead of mixing floats and doubles, convert the code to
use double so that we avoid float->double conversion warning
from compiler.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The txtime can be run manually with qemu_x86 but it is enough
to have native_sim compiled with twister.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When setting boolean options using setsockopt(), the option
type should be int as the size of the option type is checked
and only int is accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Incremental builds for TF-M are not picked up by Zephyr linking stage.
Code changes to tf-m repository results in a rebuild of TF-M and thus
an updated tfm_s.hex (and other files).
tfm_s.hex is merged together with the zephyr hex to form a final merged
hex file for flashing. This is done as a post-build command, however
such as step cannot take extra dependencies. The Zephyr target can have
extra dependencies, however that will only ensure the dependency is
brought up-to-date when Zephyr re-link, not re-linking Zephyr when the
dependency changes.
Therefore an object dependency is placed on the interface.c file for
Zephyr TF-M interface implementation, which ensures the tfm_api library
is brought up-to-date whenever TF-M rebuilds, and this update again
ensures the Zephyr itself is re-linked whenever TF-M rebuilds.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Was getting the following error:
include/zephyr/sys/fdtable.h:150:38: warning: 'struct k_mutex'
declared inside parameter list will not be visible outside of
this definition or declaration
150 | struct k_mutex **lock);
| ^~~~~~~
(#51667) tried to fix this by including `zephyr/sys/mutex.h`,
but `struct k_mutex` is defined in `zephyr/kernel.h`, so
include the latter instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The flag won't work with sysbuild since there is no way to
reliably tell to a parser which data came from which image.
fixes: #74092
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
__z_clock_nanosleep function was getting current time in cycles, via
k_cycle_get_32(), to perform its time calculations. However, when calling
k_sleep() to actually sleep, times are measured in ticks.
This causes a problem when there's a big skew between the uptime
measured in cycles vs uptime measured in ticks: in some platforms, the
system clock maybe up for a long time already when Zephyr starts
counting ticks, for instance, while downloading an image via PXE. In
this case, the calculations done inside __z_clock_nanosleep end up
measuring a much bigger current time than expected, thus sleeping too
much, basically all the time since system clock initialization.
This patch fixes that by avoiding the cycle trip: stick to ticks,
instead. They start counting from Zephyr initialization instead, which
is the expected uptime.
Fixes#69608
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
ESP32 requires proper alignment between sections. There are some
scenarios, as reported in #74533, that the section can
get shifted, causing runtime failure.
Making sure SECTION_PROLOGUE is used with ALIGN_WITH_INPUT
will guarantee its consistency.
Fixes#74533
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The sscanf() is not available for minimal libc so it cannot be used.
Use the net_bytes_from_str() that is provided for this purposes.
Fixes#75029
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
RTCs support a variety of combinations of alarm time fields, set
by the alarm time mask. Until now, alarm tests have selected
only the minute and hour fields, as these are always supported,
but some RTCs require setting every supported field when setting
the alarm time, while other RTCs don't support setting every field.
To support all RTCs in the test suite, a configuration has been
added which makes the alarm time mask configurable. Boards can now
define the specific alarm time mask they want to test within
their boards .conf files.
Additionally, the alarm tests have been refactored to not depend
on the time.h library to determine the struct rtc_time times to
set as these are constant, so they are now provided as const
structs instead.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
When logging strings are stripped then addresses to log module
names are invalid. Do not store that address in the const
data structure associated with the logging module to avoid
someone accessing it. Store null instead.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
nRF54H20 USB device controller cannot be enabled without VBUS, but the
device should not be connected to the host during testing. Add it to
build_only section.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not halt control endpoint, control endpoint may not be enabled when
there no host is connected. Yield after buffer is queued to allow the
driver to work.
Tweak pool size and number of buffers to pass the test with high-speed
drivers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Restore the default CAN bitrates after having tested setting bitrate and
timing. This ensures the arbitration phase bitrate is proportional to the
data phase bitrate, allowing CAN FD transmission tests to complete.
Fixes: #73723
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Uses the variable for the default image when adding sysbuild
dependencies so that they can be copied out-of-tree and still work
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
"ZEPHYR FATAL ERROR 2: Stack overflow on CPU 0" observed on a few
supported platforms when using SD card disk. Increase main stack size
for next USB device stack configuration to prevent stack overflow.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
After #74682, any function with constructor attribution requires
additional configuration. Due to some left-over and not-used
code in hal_espressif with that attribution, some samples started failing.
This is an additional to ##75063
Fixes#75169
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ZSR_DEPC_SAVE is being used to determine whether we are faulting
inside double exception if this is not zero. It is possible that
the boot ROM or custom startup code leaves this non-zero, which
would result in a fake triple fault. So clear it at boot. Note
that the zeroing is done in MMU init code as these triple
faults are not actual hardware ones but only semantics, and will
occur once MMU is enabled.
Fixes#75194
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit catch the return code of the spi_config function and
early returns on error so that high level spi transfer api gets
the error too.
Signed-off-by: Adrien MARTIN <adrienmar@kickmaker.net>
In case of thread failure, fix the registrations by properly managing
the synchronization i.e. use conditional wait only if thread is being
initialized or will be initialized, else check for success or failure
without waiting for conditional variables.
Fixes#73523.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add pytest to test the output of dictionary logging to make sure
the encoded logs can be decoded back into strings, and to also
make sure the decoded logs have the expected strings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation for introducing pytest to test the output
of dictionary logging. Code is the same, but the testcase.yaml
is trimmed to only those that can be tested.
Note that a copy is made instead of moving the whole sample over
is simply due to various documentation having references to
the sample. Since RST files under tests/ are not parsed for
zephyr:code-sample:<name>, the linking would have been vanished.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
pylint keeps failing and complaining about arg_data_type is
used before assignment. So assign it to None to silence
the warning.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The package_len has been extended from 10 bits to 11 bits
in the log message header. So the format for dictionary
logging also needs to be updated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Python does not really support long long double, so %llx cannot
be formatted correctly, so we replace it with a simple %lx.
There is another variant %#llx and we also need replace it to
%#lx.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... and put them into the LogParser class file instead of
the verisoned parser. This is in preparation for introducing
a new parser version.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Printing long long requires alignment on 64-bit before parsing
the actual argument. Or else the parser would be looking at
some unrelated bits. So fix it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extracts the DataTypes class into its own file. This is in
preparation to add a new version of parser which can reuse this
class.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If logging packages need to be created at runtime, the format
strings need to be in memory for the packaging code to know
what to be packed. So prevent stripping the logging string
section if CONFIG_LOG_ALWAYS_RUNTIME is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix the dictionary database not being generated under some
situations even though CONFIG_LOG_DICTIONARY_DB_TARGET is
disabled. For example, build and run through QEMU via
west build -t run.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adjust error message so that it clearly states runners.yaml is
missing from <build_dir>/zephyr, instead of referencing CMake cache
variable ZEPHYR_RUNNERS_YAML, which is no longer used (since
3124c02987 ).
Also clean up that variable in CMake since it is no longer used
(0 other references in entire tree).
Fixes#70605
Signed-off-by: Louis Feller <louis.feller@st.com>
Terms like the west workspace or even west projects and modules were not
documented prominently enough, prompting users to ask for additional
clarification. This patch attempts to resolve this by adding terms and
explanation of concepts to the glossary and west doc pages.
Fixes#67376.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move information about device power state constraints from device
to policy.
It slows down the constraints lookup since we now have to find the
constraints for a device in a global array, but it saves resources
because we don't need to add a reference to constraints in all devices
instances.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Print on what board/core sample is executing.
Print how many bytes of data can be sent
in the mbox message (show use of mbox_mtu_get_dt()).
Print how many channels are available for incoming and/or
outgoing messages (show use of mbox_max_channels_get_dt()).
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add the sample application as existing for the CAP initiator
and CAP acceptor.
The samples are still in progress of being improved and
fully featured, but they exist and can be used already now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Set the UNALIGNED_ACCESS_SUPPORTED only for MCU with cortex M
that are neither M0 nor M0plus
Cortex M0 or M0plus mcus do not support un-aligned address access
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add `CONFIG_REQUIRES_FLOAT_PRINTF=y` to tflite-micro samples as in the
past the module was using its own `printf` implementation, but now uses
our logging infrastructure.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add test cases for testing basic CFB functions.
These tests cannot run in CI because the CI environment has no display.
Mark these tests as `build_only`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
I broke the rendering of the CFB_FONT_MSB_FIRST font in
the previously committed #53796.
I will correct the entire font rendering process to make it
easier to remove the restriction that the vertical size of
the font must be a multiple of 8.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
MWDT requires function to be declared with argument types.
This PR provides explisitly type cast for out routine
inside z_cbvprintf_impl().
This PR also actual to LLVM-based compilers with strict
rules of compilation. It covers warnings generated with
additional flag -Wincompatible-function-pointer-types-strict.
This fixes https://github.com/zephyrproject-rtos/zephyr/issues/74562
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Add validation of the number of ASEs in control point
write requests.
This validates that the number of ASEs
in the control point is not greater than the total number
of ASEs we support.
This also validates that the GATT MTU is large enough to
hold all the responses from the write since those can only be
sent as notifications and never be truncated.
Finally this validates and updates the size of the buffer used to
hold the responses, which may be an optimization for some builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add CANXL MRU handler, use the same RX, TX IRQ number.
Update the error priority that is lower priority than
the the tx_rx_mru priority incase the error interrupt
happens continuously, mru interrupt priority must be
higher to get report error counter. Otherwise the mru
interrupt can be delayed by error interrupt and
never call to MRU handler. This fixes#75022.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Removed the declaration and assignment of `eth_ctx` variable from
`net_if_get_wifi_sta` and `net_if_get_wifi_sap` functions since
it was not being used.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The macro was modified in a way that may cause issues for some.
See e.g. 15d66ccc23
for an example of it needing a change.
The migration guide GH PR number refers to the PR that modified
the macro.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Delay an ACK in case no PSH flag is present in the data packet. as
described in RFC 813. This allows to reduce the number of ACK packets
we send and thus improve the TCP download throughput.
The results achieved on `nucleo_h723zg` board and the zperf sample
are as follows:
Before: 77.14 Mbps
After: 93.14 Mbps
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `type` parameter of `struct bt_le_scan_param` is documented as
taking a `BT_LE_SCAN_TYPE_*` value, not a `BT_HCI_LE_SCAN_*` value.
In practice this makes no difference as the values are defined as the
same integer, but does result in `<zephyr/bluetooth/hci.h>` not needing
to be included.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Implement the remaining functions from the POSIX_FD_MGMT Option
Group that are part of POSIX, and add the
CONFIG_REQUIRES_FULL_LIBC dependency to CONFIG_POSIX_FD_MGMT, to
pull in the remaining C89 functions.
The POSIX_FD_MGMT Option Group is required for PSE52, PSE53, and
PSE54 Subprofiling Option Groups.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark the POSIX_SIGNALS Option Group as supported to the extent
possible under Zephyr, as Zephyr does not yet support processes.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Since Zephyr itself does not currently support processes, but
conformant applications should still be able to link, add stubs
for the remaining POSIX functions in the POSIX_SIGNALS Option
Group.
The POSIX_SIGNALS Option Group is required for PSE51, PSE52,
PSE53, PSE54, and likely many other POSIX Subprofiles.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Newlib requires an alias for the getpid() function. There was
a Kconfig already present for doing so, but the actual alias
was missing.
So this is technically a bugfix.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
After RC1 (feature freeze), new tests for existing features are allowed.
Afterwards, only bug fixes and documentation to existing tests are
allowed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This update includes bugfixes related to esp_timer,
responsible for handling Wi-Fi thread events.
This also removes all constructor attributes from non-used
hal functions.
Fixes#74368Fixes#74277Fixes#75063
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The macro was changed to return a const pointer, but the
BTP use the returned pointer in a non-const way.
Modify the usage so that the macro is used to initialize
the adv_param instead, and then provide a non-const pointer
to tester_gap_create_adv_instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Check for existence of APPLICATION_CONFIG_DIR in sysbuild.
sysbuild.conf is an optional file, meaning that sysbuild will not fail
if APPLICATION_CONFIG_DIR points to a non-existing folder.
A normal Zephyr build already fails when passing an invalid
APPLICATION_CONFIG_DIR but only because it cannot find a required
prj.conf in the folder.
Checking the existence of APPLICATION_CONFIG_DIR in sysbuild and fail
the build when a non-existing folder is passed to sysbuild ensures
sysbuild behaves similar to a normal Zephyr build regarding a
non-existing folder, while still allow sysbuild.conf itself to be
optional.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Some controllers, like the SoftDevice Controller can miss the first few
advertisements after the host tells it to start scanning. The DUT would
assumes the first RPA advertisements report it gets is the first that
was sent, but it was actually not the first. This would skew the
tester's judgement about the timing of RPA rotations.
To remedy this, the tester will scan continuously and switch between
expecting the identity address and the RPA without stopping the scanner.
The tester will tell the DUT to switch to RPA after it has received the
identity address advertisement. This ensures that the tester will not
miss the first RPA advertisement.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
For more information about the CYW20829 SoC and CYW920829M2EVK-02 board:
-`CYW920829M2EVK-02 Website`_
-`CYW920829M2EVK-02 BT User Guide`_
-`CYW20829 SoC Website`_
-`CYW920829M2EVK-02 Board Website`_
Kit Features:
=============
@@ -86,51 +85,76 @@ To fetch Binary Blobs:
Build blinking led sample
*************************
Here is an example for the :zephyr:code-sample:`blinky` application.
Here is an example for building the :zephyr:code-sample:`blinky` sample application.
..zephyr-app-commands::
:zephyr-app:samples/basic/blinky
:board:cyw920829m2evk_02
:goals:build flash
OpenOCD Installation
====================
To get the OpenOCD package, it is required that you
1. Download and install the `ModusToolbox`_ software.
2. After the installation, add the directory containing the OpenOCD scripts to your environment's PATH variable.
:goals:build
Programming and Debugging
*************************
The CYW920829M2EVK-02 includes an onboard programmer/debugger (KitProg3) to provide debugging, flash programming, and serial communication over USB. Flash and debug commands must be pointed to the Cypress OpenOCD you downloaded above.
The CYW920829M2EVK-02 includes an onboard programmer/debugger (`KitProg3`_) to provide debugging, flash programming, and serial communication over USB. Flash and debug commands use OpenOCD and require a custom Infineon OpenOCD version, that supports KitProg3, to be installed.
On Windows:
Infineon OpenOCD Installation
=============================
..code-block::shell
Both the full `ModusToolbox`_ and the `ModusToolbox Programming Tools`_ packages include Infineon OpenOCD. Installing either of these packages will also install Infineon OpenOCD. If neither package is installed, a minimal installation can be done by downloading the `Infineon OpenOCD`_ release for your system and manually extract the files to a location of your choice.
west flash --openocd path/to/infineon/openocd/bin/openocd.exe
west debug --openocd path/to/infineon/openocd/bin/openocd.exe
..note:: Linux requires device access rights to be set up for KitProg3. This is handled automatically by the ModusToolbox and ModusToolbox Programming Tools installations. When doing a minimal installation, this can be done manually by executing the script ``openocd/udev_rules/install_rules.sh``.
On Linux:
West Commands
=============
..code-block::shell
The path to the installed Infineon OpenOCD executable must be available to the ``west`` tool commands. There are multiple ways of doing this. The example below uses a permanent CMake argument to set the CMake variable ``OPENOCD``.
west flash --openocd path/to/infineon/openocd/bin/openocd
west debug --openocd path/to/infineon/openocd/bin/openocd
..tabs::
..group-tab:: Windows
..code-block::shell
# Run west config once to set permanent CMake argument
west config build.cmake-args -- -DOPENOCD=path/to/infineon/openocd/bin/openocd.exe
# Do a pristine build once after setting CMake argument
west build -b cyw920829m2evk_02 -p always samples/basic/blinky
west flash
west debug
..group-tab:: Linux
..code-block::shell
# Run west config once to set permanent CMake argument
west config build.cmake-args -- -DOPENOCD=path/to/infineon/openocd/bin/openocd
# Do a pristine build once after setting CMake argument
west build -b cyw920829m2evk_02 -p always samples/basic/blinky
west flash
west debug
Once the gdb console starts after executing the west debug command, you may now set breakpoints and perform other standard GDB debugging on the CYW20829 CM33 core.
@@ -110,7 +110,7 @@ configurations should be used based on the board standard headers available.
Build and Programming
*********************
Set ``-DSHIELD=<shield designation>`` when you invoke ``west build``.
Set ``--shield <shield designation>`` when you invoke ``west build``.
To build shield with specific overlay:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
