The ARM embedded toolchain has 2 newlib based libc build variants, one
that utilizes the "nano" configuration which is more in line with the
Zephyr SDK. Make the "nano" cfg the default if newlib is enabled to
match closer how the Zephyr SDK behaves.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Error checking was missing following call to
counter_set_channel_alarm.
This was reported in coverity report 203523.
Fixes#18374
Additionally remove unneeded err initialization in main function
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Make sure we use the IPv4 event command when checking IPv4 address
add or delete instead of event mask.
Coverity-CID: 203483
Fixes#18400
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Configure pins before enabling and after disabling UARTE through
power management functions.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
commit 780324b8ed ("cleanup: rename fiber/task -> thread")
seems to be done by a script and in that particular case turned
menaingful sentence into nonsense. Alas, threads might be in all
four states.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anas Nashif <anas.nashif@intel.com>
We manage IRQs in a quite a different way now since
commit f8d061faf7 ("arch: arc: add nested interrupt support")
so that comment not only makes no sense but also may fool a reader
as disabling of interrupts happens in the very beginning of
_rirq_exit() but not here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
When val1 is 0, we need to handle a negative val2 value so that we
generate correct TLV value.
Example: val1 = 0, val2 = -500000 is equivalent to -0.5 decimal.
Currently we generate: 0.5 (losing the sign).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
We can use the plain text float32/64 formatter for JSON as well, so
let's expose the put_float32/64 functions.
Signed-off-by: Michael Scott <mike@foundries.io>
Formatting a float32/64 value for plain text is broken.
Example for 32bit: val1=0 and val2=500000 is equivalent to 0.5
Current formatter was using %d.%d (%lld.%lld for 64bit) so
exported value was 0.500000 (or 0.5)
To fix this, for val2 use a zero-padded formatter for the maximum
length of each bit length (6 for 32bit and 9 for 64bit), and then
remove the zero characters at the end of the string.
Notes re: handling of val1/val2 signs:
- eliminate potential negative sign when converting val2 to avoid:
a value like: 0.-5
- use negative val2 when val1 is 0 to fix small negative handling
such as -0.5
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
we should not rely on that eret has a copy of ilink in fast
irq handling. This will cause crash for hs cores.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For the old codes, if nest interrupts come out after _isr_wrapper
and before _check_nest_int_by_irq_act, then multi-bits in irq_act
will be set, this will result irq stack will not be switched in
correctly
As a fix, it's still need to use nest interrupt counter to do
interrupt stack switch as before
The difference is in the past exc_nest_count is used, but here
_kernel.nested/_kernel.cpus[cpu_id].nested is used.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* in arc secureshield interrupts can be configured
as secure or normal
* in sw design, high interrupt priorites are allocated to
secure world, low priorities are allocated to normal world.
* secure interrupt > secure thread > normal interrupt > normal
thead
So, here secure world/firmware only checks secure interrupt
priorities
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
it's not allowed to switch to thread preempted by exception as
its context is not saved.
So if a thread switch is required in exception handling, e.g.
kill a thread, the old thread cannot be switched back
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For arc processor equiped with secureshield, SEC_STAT.IRM
bit should be recorded, it determins which mode irq should
return
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
modernizr.min.js is causing unnecessary reloads of a page causing
flashing of the browser window during page load (most noticiable with
firefox). This empty script effectively wipes out the modernizr.min.js
unnecessarily loaded by the Sphinx rtd theme (see
https://github.com/readthedocs/sphinx_rtd_theme/issues/724)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit extends existing logging sample in order to present
logger usage from user mode thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit adds basic userspace support to the logging subsystem.
With this change, the following API could be called from user mode:
- LOG_*()
- LOG_INST_*(),
- LOG_HEXDUMP_*(),
- LOG_HEXDUMP_INST_*(),
- LOG_PANIC(), LOG_PROCESS(),
- log_printk(), log_generic(), log_buffrered_cnt(),
- log_filter_set(NULL, ...)
With userspace disabled, the logger behavior and performance
is not affected. With userspace enabled, the calls from kernel
space have an additional overhead introduced by _is_user_context().
The logger behavior changes when it is called from the user context.
All strings logged using LOG_*() and LOG_INST_*() API from userspace
are rendered in place for security reasons and then placed in
log_strdup() memory pool, which should be large enough to hold bursts
of log messages.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit exports the _is_user_context() function regardless
of the CONFIG_USERSPACE setting. If userspace is enabled, the
value returned depends on the execution context. If userspace
is disabled, the _is_user_context() always returns false.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
if base64_decode function returns error, function can't continue
otherwise a fatal error will cause the thread to spin, putting the
system into an unrecoverable state
Signed-off-by: Faisal Saleem <faisal.saleem@setec.com.au>
Instead of having a mix of west and CMake/ninja instructions for
building and flashing, document it using only west. This will help
clarify that west is the default build tool in Zephyr and should also
reduce confusion over what tool to use.
Note that the biggest change is changing the default in
doc/extensions/zephyr/application.py for :tool:, from all to west.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We do not need the return values from various calls to pthread_*()
functions.
Coverity-CID: 203462
Coverity-CID: 203535
Fixes#18376Fixes#18377
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove bunch of TC_PRINT's with too verbose logging of test operations.
The only logging required is in case of failures, and improve that in
a couple of cases by using zassert_*(), and log errno.
In particular, this allows to reuse existing testcase functions to
create more complex testcases.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To make sure that entry in fs.c:desc_array[] is freed. Note that
freeing an entry in fdtable is handled by generic implementation
of close().
Fixes: #17231
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Do not try to memcpy() the same buffer to itself.
This one also reverts commit 112ecb7290
("net: gptp: Fix for coverity CIDs 203471 and 203464") as that
did not fully fix the issue.
Coverity-CID: 203464
Coverity-CID: 203471
Fixes#18394
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set harness to led as a placeholder to avoid running samples on
platforms that do not have the needed hardware.
Fixes#17439
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Match the logging changes made in samples/.../usb/cdc_acm to the
cdc_acm_composite sample. This allows any device testing checks to work
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix unhandled return values as most other places handled in this
file, fix coverity issue 203507.
Fixes: #18445.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Fix unhandled return values as most other places handled in this
file, fix coverity issue 203454.
Fixes: #18443.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Fix the controller implementation to handle data packet
enqueue being pause on Encryption Request be done early in
the ULL when enqueueing packets towards LLL.
Fixes#18645.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.chettimada@gmail.com>
Rename AUTHENTICATION, to AUTH, since this is a well established short
form of the word.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
poll() and related things are expected to be declared in this header
by POSIX applications.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make sure that the extension, like HBHO, sub-option length is
not too large.
Fixes#16323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A security vulnerability in the Bluetooth BR/EDR Bluetooth Core
specification versions 1.0 through 5.1 has been identified as
CVE-2019-9506. The Bluetooth BR/EDR encryption key negotiation
protocol is vulnerable to packet injection that could allow an
unauthenticated user to decrease the size of the entropy of the
encryption key, potentially causing information disclosure and/or
escalation of privileges via adjacent access. There is not currently
any knowledge of this being exploited.
From Core spec erratum 11838:
A device shall enforce an encryption key with at least 128-bit
equivalent strength for all services that require Security Mode 4,
Level 4. For all other services that require encryption, a device
should enforce an encryption key with at least 56-bit equivalent
strength, irrespective of whether the remote device supports Secure
Simple Pairing.
After encryption has been enabled, the Host should check the
encryption key size using either the HCI_Read_Encryption_Key_Size
command (see [Vol 2] Part E, Section 7.5.7) or a vendor-specific
method.
Fixes#18658
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case sufficient security level wasn't reached the error propagation
was missing, which could lead to incorrect state transitions when
update_sec_level_br() returns. Return true/false and make sure to
abort any further operations in case the update fails.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The storage for the public key is pub_key in hci_core.c.
When the public key event is generated the public key is copied into
this buffer, but the pointer to the event storage of the key is given
in the public key ready callback (bt_smp_pkey_ready).
SMP expects that it is safe to assign a global pointer to this variable.
In smp_init bt_pub_key_get is used to get the pointer to the public key.
In both cases SMP assigns the le_sc_pub_key to the pointer given.
This creates an issue when bt_smp_pkey_ready callback occurs after
smp_init during pairing procedure, SMP will then have a pointer to an
event buffer that has been released and contains invalid data.
Fixes: #18580
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Increase temporary buffer size to 8 bytes in fcb_append to prevent
stack overflow in case flash alignment is bigger then 2 bytes.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
We need to increase the stack size of the main thread, to
avoid stack overflow, when executing the tests on various
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add console testing harness for expected output. This allows us
to validate that the test is running properly on hardware.
We expect output of the form (the Reboot_counter will increment
overtime).
Id: 1, Address: 192.168.1.1
Id: 2, Key: ff fe fd fc fb fa f9 f8
Id: 3, Reboot_counter: 5
Id: 4, Data: DATA
Id: 5, Longarray: 0 1 2 3 4 5 6 7 8 9 ... 7f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add simple console testing harness for expected output. This allows us
to validate that the test is running properly on hardware.
We expect the sample to report back somthing like:
Counter received: 1
Counter received: 2
Counter received: 3
Counter received: 4
...
etc.
So have a simple regex check for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some smaller stm32l0x MCUs, such as stm32l011x, do not have GPIOH
port. Fix build for those by checking LL_SYSCFG_EXTI_PORTH macro.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Ensure that two routines won't interfere with eachother.
In current situation there is possibility that ENDRX will be called
during rx_timeout routine or vice-versa which will result in wrong
offset and length passed to user.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Due to longer than expected user callback handling, rx byte counting
got out of sync with real values. It leads to incorrect values
reported to user. This fix adds sync point at the end of buffer.
When using hardware rx counting this issue should not occur.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The size of the request buffer (USB_REQUEST_BUFFER_SIZE)
is configurable and depends on the needs of an application.
Check if the request buffer is not too small.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Give the security changed callback when the peripheral initiated
security request and peer attempted to encrypt the connection but no LTK
match was found.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make sure that a new pairing procedure with an existing bond does not
result in a security with weaker security properties.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add option to force the host to initiate pairing procedure even if the
host has encryption keys for the peer.
This option can be used to pair with a bonded peer that has deleted its
bonding information without deleting the keys. If new pairing results
in weaker keys the pairing will be aborted.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add security error to security_changed callback. Call this callback when
security has failed and provide current security level and error.
Reason for failure can be.
- Pairing procedure failed, pairing aborted before link encryption.
- Link encrypt procedure failed
- Link key refresh procedure failed.
Fix missing bt_conn_unref on encryption key refresh with error status.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the pairing procedure in the request phase if no storage is
available for the keys. This avoids the pairing procedure from failing
during the key distribution phase.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Proved the Authentication callback for pairing failed and pairing
complete when BR/EDR SSP is complete.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow SMP debug keys to behave in the same way as normal keys, in order
to debug with encryption and Bluetooth sniffer the exact way it behaves
when not using debug keys.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
A second semaphore is used for the second trickle timer, so that if the
first timer expires twice before the second one, the test would still
wait before proceeding to check on cb_2_called.
Fixes#18598.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The commit fixes the way we determine an available
NVIC IRQ line to perform the zero-latency IRQ test.
The test can now run properly on SOCs that do not
have a continous set of implemented NVIC IRQ lines.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The reason we decide to ignore it in code coverage:
1.No test case can cover the function for code coverage.
2.Even if we added a test for testing, it would be marked as
"never be called by other code" because the function cause
CPU halted and it can't return.
Signed-off-by: Peng Su <peng.su@intel.com>
Set the recommended thread stack size to 40 bytes in case a build is
made for a 64-bit native posix board
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
When LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP is enabled:
- Mark the first server as a bootstrap server
- Create second server and security instances (used by bootstrap
server)
This allows bootstrap support to be tested out of the box with
the following:
- setup Leshan bss-server-demo (bootstrap server) on port 5783
- setup Leshan server-demo (lwm2m server) on port 5683
- add an entry into the bootstrap server:
LWM2M Server=coap://[2001:db8::2]:5683
- build the sample like so:
west build -t run -b qemu_x86 \
-s zephyr/samples/net/lwm2m_client/ -- \
-DCONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP=y \
-DCONFIG_LWM2M_PEER_PORT=5783
Signed-off-by: Michael Scott <mike@foundries.io>
- LWM2M_SECURITY_INSTANCE_COUNT wasn't following the standard of
having the unconditional default in the last position
- LWM2M_SERVER_INSTANCE_COUNT needs another instance when
bootstrap is enabled.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M boostrap support is enabled via the config option:
LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP. If enabled, this config sets
the default # of server and security instances. However, this is
not working correctly because LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP
is defined below it's uses in the Kconfig file.
Let's move the RD_CLIENT configs higher in the Kconfig to fix this
behavior.
Signed-off-by: Michael Scott <mike@foundries.io>
The sphinx-tabs extension provides a tabbed interface within documents
that will let us dynamically display information based on a user
selection, for example, for instruction variations based on the user's
development OS (Linux, macOS, Windows).
I'm adding this early so it can get integrated into the CI doc build
before subsequent PRs using this extension are submitted.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The test assumes that storage is clear before it runs. This
might be not true as lot of devices are only partially erased by
'west flash'.
Patch introduce procedure for testing whether test runs the first
time and clear storage if so.
The procedure uses mark which is stored inside SoC embedded program
flash. It will not work one devices on which read/write to it is
impossible.
fixes#16463
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CONFIG_NUM_IRQS blindly assumes CONFIG_2ND_LEVEL_INTERRUPTS
and CONFIG_3RD_LEVEL_INTERRUPTS are always enabled together,
which is not always the case. So fix the #define.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are only 178 interrupt lines on CC3220SF. Hence we should not set
NUM_IRQS to a value exceeding that value. We are changing it to 178.
Fixes#18593
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
CONFIG_NET_SOCKETS_POSIX_NAMES is incompatible with POSIX_API, so it's
disabled by the build system. It's no longer required anyway.
It is a leftover from before #16557 was merged.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
west is yet another python package, so lets add it here. This will
provide us with one single file with all python requirements that can be
used during setup and for example for docker images.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit contributes the implementation of
get_entropy_isr API function for the SAM entropy
driver. The implementation is similar to get_entropy,
with the difference that it does not invoke k_yield()
when called with the ENTROPY_BUSYWAIT options flag set.
When the function is invoked without the ENTROPY_BUSYWAIT
flag, it simply returns whatever data is available,
without busy waiting on the RNG herdware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use LOG_LEVEL_INF as defautl log level and use LOG_INF
for important messages. Relax while loop and
give CPU resources to low priority threads like logging.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Update state after RESUME event.
Use LOG_INF for important events and log a
warning if the data is discarded.
Fixes#17488
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
If no challenger went to replace the best port/vector, then the best
port is still the global_ds and thus point to the same memory: no need
to update the global_ds then.
Coverity-CID: 203471
Coverity-CID: 203464
Fixes#18395
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Looks like the logic to count rejection is missing. Removing count_rej
variable, and set a comment about initializing the code to the right
value once this logic will be in.
Coverity-CID: 203514
Fixes#18398
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Nordic platforms measure ticks in cycles of a 32 KiHz clock for which
the minimum compare delay is 2 ticks. The test assumed an upper bound
of four ticks delay per loop iteration, resulting from alignment at
various layers. This delay is met on Nordic for tick rates at or below
16384, but is too short for the default 32768 Hz tick rate.
Instrumentation confirms that the usleep test loop body on Nordic at 32
KiHz ticks takes 3 ticks as the optimum delay, only when a debug probe
is active. In other circumstances it can take either 5 or 6 ticks,
depending on timer alignment and stability.
Relax the upper bound for platforms using this system timer at the
highest rate.
Closes#17965.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Documents generated for a tagged release have a header that mentions
that the "latest" (master branch) version of the doc may be more up to
date, but the link to the corresponding master doc is missing the
/latest/ (previously the master docs were in the root folder.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes: #17764
The mutex locking was written to use k_sched_lock(), which doesn't
work as a synchronization primitive if there is another CPU running
(it prevents the current CPU from preempting the thread, it says
nothing about what the others are doing).
Use the pre-existing spinlock for all synchronization. One wrinkle is
that the priority code was needing to call z_thread_priority_set(),
which is a rescheduling call that cannot be called with a lock held.
So that got split out with a low level utility that can update the
schedule state but allow the caller to defer yielding until later.
Fixes#17584
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Update the xtensa backend to work better with the new fatal error
architecture. Move the stack frame dump (xtensa uses a variable-size
frame becuase we don't spill unused register windows, so it doesn't
strictly have an ESF struct) into z_xtensa_fatal_error(). Unify the
older exception logging with the newer one (they'd been sort of glomed
together in the recent rework), mostly using the asm2 code but with
the exception cause stringification and the PS register field
extraction from the older one.
Note that one shortcoming is that the way the dispatch code works, we
don't have access to the spilled frame from within the spurious error
handler, so this can't log the interrupted CPU state. This isn't
fixable easily without adding overhead to every interrupt entry, so it
needs to stay the way it is for now. Longer term we could exract the
caller frame from the window state and figure it out with some
elaborate assembly, I guess.
Fixes#18140
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Platforms which use the GEN_SW_ISR mechanism for interrupt handling
can make use of a really simple whitebox trick for verifying that it
worked (i.e. that the pointer and argument get placed in the table
correctly).
Easy and simple way to get some coverage for dynamic IRQs, which is
currently entirely missing. Long term we'll want to replace this with
a test that uses the API directly and chooses an arch-specific vector
to set, and triggers it using arch-specific code, but that's quite a
bit more effort and for now we need to land patches to
z_irq_connect_dynamic() which show test coverage.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It was discovered that the xtensa version of
z_arch_irq_connect_dynamic() was being removed along with the old
xtensa architecture support, because it was never included in the asm2
builds.
But there's no xtensa-specific code in it at all. Architectures that
use the existing sw_isr_table mechanism and don't (or can't, in the
case of xtensa which has fixed interrupt priority) interpret the other
parameters might as well have access to a working generic
implementation.
Fixes#18272
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The period_start timestamp wasn't getting properly initialized in the
case that retransmission was not being used. In the case of
retransmission the timestamp was getting updated in the mod_publish()
delayed work callback. Add a send_start callback and do the
initialization there, since this covers both the retransmission as
well as the no-retransmission cases.
Fixes#17820
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Post Tx pool corruption fix, clean up code and add comments
explaining the use of Tx node next field used to indicate
the Tx node's allocation from Control or Data pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Tx FIFO, queue and pool corruption due to missing
release of link object to Tx link pool and hence missing
reset of the per connection initially allocated Tx link
free pointer.
The bug caused Tx PDUs and associated memory to be lost
leading to missing L2CAP segment transmissions. With lost
control PDU buffers, ULL would stall processing Done events
also leading to controller asserts.
Fixes#18546.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check if usb_cfg_data pointer was initialized
before endpoint descriptor section is processed.
Coverity-CID: 203473
Fixes: #18423
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This changes to the sentence about how attribute parameter is used when
notifying by UUID to sound proper english.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to provide an UUID to bt_gatt_indicate so API user
don't need to hardcode the attribute offset by hand.
Fixes#18572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mark harness as TBD as we haven't defined how to test/validate this
sample on real hardware. As such marking it 'harness: TBD' will get it
skipped from being attempted to run on hardware via --device-testing
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
An inverted comparison typo led to the final loop in the sflist being
skipped. Fix so that it actually runs.
(Odd that it took a static analysis tool to detect this, the loop
expressions are all constants, I'm surprised gcc didn't see it while
doing unrolling analysis).
Fixes#18437
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Can't use a volatile variable in something that the tool thinks is an
optional assert, because the read is treated as a side effect.
Fixes#18438Fixes#18439
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Due to commit a211afb041, an error on
missing log_strdup() call is seen when running samples for CC32xx
devices that use the Wi-Fi driver. Adding log_strdup() calls to fix
this.
Fixes#18563
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Maintain this HAL in its own repo:
git@github.com:zephyrproject-rtos/hal_openisa.git
and manage using west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We were testing the value of a volatile variable inside a zassert,
which static analysis doesn't like. In principle, it might be
volatile because it's an MMIO register or something and the read is a
side effect, and an assertion will be optionally compiled. (Except
here the value is just regular memory marked volatile for
threadsafety, and zassert will never be elided in a test, but the tool
doesn't know that).
Refactor a little so we always read the variable in a way the tool can
detect is consistent.
Fixes#18446
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's shorter and may get rid of false Coverity positives 203489 and
203498 and fix#18424 and duplicate #18425.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
pthread_mutex_init() just redirects to Zephyr kernel primitive, for
initializing structure fields. So, use the knowledge that it can't
fail (for as long as structure pointer is initialized, and here it's
from pre-allocated array), and ignore return value of
pthread_mutex_init()
Coverity-CID: 203542
Fixes: #18371
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Was "pkconfig", which may confuse users whether some different tool
than the standard pkgconfig is meant.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The code for checking space in the Friend queue was faulty in the case
that we receive a message with more segments than the configured Friend
Queue size. This is not an issue for the default configuration but
still a possible one. Move the check for exceeding Friend Queue Size
to the per-LPN function, so that bt_mesh_friend_queue_has_space()
iterates all LPNs before delivering its verdict. This allows us to
return success in case no LPN matched (which is how the code was
intended to work).
Fixes#18522
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Confirms build (and run) of C++17 applications that make use of STL
containers and other features.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The solution from #14312 of using -isystem to prioritize the position of
the libc directory bypasses the effect of -ffreestanding with respect to
libc symbols expected to be present in a non-hosted environment.
Further, it breaks C++ with the ARM Embedded toolchain as the system
fails to find the right file with #include_next.
Use a more fine-grained solution that explicitly includes the underlying
newlib header required for <inttypes.h> support before moving on to
include the next available one, whether system or non-system.
Closes#17564
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The order of the fonts in ROM has changed.
Since the sorting is not wrong, correct the
order in the application.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Simplify algorithm to skip (aka calculate length) of encoded domain
name in a DNS answer. Now it's fully compliant to RFC 1035 regarding
handling of compressed FQDNs. Additionally, bounds checking is now
performed by the parsing code.
Fixes: #18334
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix for Zephyr bug #17415
For settings_line_val_read function with following .conf setting:
CONFIG_SETTINGS_USE_BASE64=y
Signed-off-by: Declan Traill <declan.traill@setec.com.au>
Add test for check whether deleted entry is recognized properly
after settings reload.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The variable enabling entry to the zero latency interrupt compensation
loop was named generically, and its logic inverted, making the code
difficult to understand. Change the name and initial value to more
clearly indicate its role.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
In arch.h the extern "C" in the including context is left active during
include of target-specific mpu headers to avoid more complex
restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move the tail include file outside the extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove extern "C" support from files that don't declare symbols subject
to language linkage effects.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Documents major driver changes (additions, removals, fixes, etc.) across
all driver families since the 1.14.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If there is more than one IO Channel than generate a define with a
trailing index for the IO Channel. This matches what we do for GPIOs
and PWMs.
So something like:
DT_FOOBAR_IO_CHANNELS_CONTROLLER_0
DT_FOOBAR_IO_CHANNELS_CONTROLLER_1
...
DT_FOOBAR_IO_CHANNELS_CONTROLLER_<N>
Fixes#18352
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need SDK version 0.10.3 to fix a build regress on RISC-V when
linking. So bump the version to pickup that fix.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In status variable in espi_pc_isr should have been a 32-bit unsigned int
as ESPI_PC_REGS->PC_STATUS is 32-bits.
Fixes#18359
Coverity-CID: 203521
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According to Mesh Profile Specification 1.0.1 Figure 5.17, the
unprovisioned device should send its confirmation value after the
provisioner sends theirs. Previously, the confirmation value would be
sent immediately after OOB input complete. Now it first waits for the
input data, then from confirmation from the provisioner before sending
the confirmation.
Fixes: #18178.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203397
Fixes#18419
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203468
Fixes#18420
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is a bug where non-normalized paths can introduce multiple entries
for the same file. E.g. '/1/2/../2.file' and '/1/2/3/../../2.file' would
both be listed, and end in a ninja error because multiple targets
generate the same file.
This commit fixes this issue by normalizing the paths.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Qualification test case MESH/NODE/FRND/FN/BV-08-C requires that we do
not store more messages than the reported Friend Queue size. The
implementation was so far opportunistic and stored more if it could
(it would later discard if necessary to make sure all queues can store
the required amount). The spec also requires the queues to have new
messages overwrite old ones (in the style of a circular buffer), so we
have to keep track of which buffers are part of the same segmented
message (so we discard all buffers belonging to the same message).
To pass the test case, add APIs to check for space in the Friend
queue, and track the number of buffers for each incoming segmented
message.
Fixes#18090
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_trans_resend() function had no users, and had in fact not
even a prototype in a header file. Just remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sent solely to the Friend Queue the send callbacks were not
getting called for unsegmented messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
'timeout' needs to be a signed variable, so that the
check for less-than-zero is able to result to true (if
the timeout actually expires). Addresses the coverity
issue [Coverity CID :203493] reported in #18379.
Fixes#18379.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This fixes the coverity problem which which in fact is a non-issue as
the code would assert before reaching that line which makes the NULL
pointer check useless so this removes it.
Fixes#18431
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the dead code when parsing Find Information response since
the index counter can never be zero, instead it checks there are any
attributes found and if there nothing don't proceed with discovering
which was the original intent of the now dead code.
Fixes#18384
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Due to conditional compile path ending in LL_ASSERT(0), the compiler
sees code following the assert as using uninitialized variables.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The number of arguments for a format string is approximated by the
number of conversion specifications. This count may exceed the maximum
supported argument count. Limit the extraction to the available space.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Newer pyocd versions (specifically the 0.21.0 we have in our
requirements.txt) no longer support -b and have moved the same option
to -u. Keep up.
Fixes: #17554
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
'recoverable' is a value passed by reference and we
should be dereferencing the pointer, to check if the
fault has been classified as recoverable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix ASSERT expressions with volatile variables in
arch/arm/arm_thread_swap test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix a memset function call so the sizeof() argument is
evaluated using the appropriate struct type.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix ASSERT expression with volatile test variables
in arch/arm/arm_ramfunc test suite. Fix, also, an
logical expression in an if-statement in the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix expressions with volatile variables in ASSERT
statements in arch/arm/arm_zero_latency_irq test
suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Closes#18392 by asserting and returning an error if the block size is
not positive.
Closes#18458. The diagnosis here was not relevant as an in-range EOS
is written before the buffer is used, but using the non-terminated
length is slightly more clear about intent and may avoid a read overrun
of the mount point.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This PR updates the documentation to cover a technical solution to
providing a driver instance that extends the functionality of a
subsystem API. The solution described was mooted in Zephyr PR #17072
and approved by the Technical Steering Committee during its 2019-08-07
meeting.
Relates-to: #11993
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
To avoid a Coverity warning (203449):
https://github.com/zephyrproject-rtos/zephyr/issues/18354
Initialize a pointer to NULL, and check it later before
de-referencing it.
Coverity could not see that posix_print_error_and_exit()
never returns even that it ends with exit()
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
No test verifies a TX callback for successful transfers.
This commit adds a test for those callbacks.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
When init level hierarchy was reworked the documentation was switched to
describe the new levels, but the count of relevant levels was not
changed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit adds the reel_board canbus shield.
On the shield, there is an MCP2515 and a CAN transceiver.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Adding required fields to the devicetree overlay of the CAN sample as
this is often used as a reference. Also use these fields instead of the
KConfig entries.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The CAN sample is rewritten to be board independent.
The CAN controller and LED is determined automatically and the
button is removed.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
SOCKS5 support added to echo_client. Details are added
in README file about how to verify this feature using
echo-client with echo-server running on Linux host.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Variable pages_per_bank has been introduced to ease page erase
in dual bank configurations. This has been implemented using
FLASH_OPTR_DUALBANK definition.
It happen that this was not taking into account L4+ series that
use FLASH_OPTR_DBANK instead of FLASH_OPTR_DUALBANK. This lead
to compilation issue for this driver in case of L4+ series.
So, this patch is adding the support of FLASH_OPTR_DBANK definition.
Besides, FLASH_OPTR_DUALBANK (as FLASH_OPTR_DBANK) are actually
defining availability of an option byte to configure use of Dual
Bank. So besides of its definition, its value in flash OPTR register
should be checked to ensure Dual Bank configuration is used.
This patch is taking this into account by adding the check of this
byte. Error -ENOTSUP is returned in case Single Bank is configured
since it has not be validated yet (in case Dual Bank is possible but
not configured).
Fixes#18246 for nucleo_l4r5zi
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
SR and LR were used as global names for load and store RISC-V assembler
operations, colliding with other uses such as SR for STATUS REGISTER in
some peripherals. Renamed them to a longer more specific name to avoid
the collision.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Add comment for the setup failure.
The solution can be infered from ARMmbed/cmsis-pack-manager#97
Fixes#18269.
Signed-off-by: Chen Guokai <1415430544@qq.com>
The openocd flash runner now expects a hex file, so always build a HEX
image if the runner is set to openocd.
Fixes#18181
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit fixes following issues in printf formatting
- cast values of type off_t to long to remove warnings generated when
compiling with Newlib and CONFIG_IMG_ERASE_PROGRESSIVELY is enabled
- cast values of type off_t always to long and not u32_t
- use 'z' modifier (as in "%zu") to print values of type size_t
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
When the database changes and a client becomes change unware it should
also clear the out of sync flag as the following request should return
an error:
Core Spec 5.1 | Vol 3, Part G, 2.5.2.1 Robust Caching:
'The error response is sent only once after the client becomes
change-unaware, unless the client disconnects or the database changes
again before the client becomes change-aware in which case the error
response shall be sent again.'
Fixes: #18183
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following crash:
ASSERTION FAIL [0] @ ZEPHYR_BASE/subsys/logging/log_core.c:180
argument 2 in log message "%s: Stored CCCs for %s (%s)"
missing log_strdup().
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The HAL/SDK code for imx6sx utilizes floating point support in
CCM_ANALOG_GetPllFreq function which is utilized by drivers to determine
clock information. As such we should enable hardware FP support by
default so we don't get pure soft-float emulation and pull in a bunch of
extra code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a band-aid to make it more obvious to potential users of 'west
sign' and 'west flash' which hex file they are flashing, when they are
falling back on a binary file, and erroring out when a hex file does
not exist.
Fixes: #18201
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This commit enables the pullup on CAN0_RX pin (PORTB 19).
The pullup ensures that the CAN controller initializes even
without a transceiver connected.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Apparently the tests/lib/sprintf test requires more than 34kB
of code size, when building in MCIMX7_M4-based platforms. Such
platforms, however, only have 32kB of code memory, therefore,
we exclude them from this test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix issue unable to connect to bonded peer when host resolution is used
either because the controller does not support privacy, or the
controller resolving list was exceeded.
In this case we need to use the RPA from the advertising report
directly, there is a small chance of the peer cycling the RPA here, in
which case the connection might be unsuccessful.
Bug introduced here: 45da629b24Fixes: #18306
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
now we use hex file instead of elf file for flash command as
PR #17822 suggested, so enable BUILD_OUTPUT_HEX by default for
board sam_e70_xplained.
Fixes: #18181.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
CONFIG_MAIN_STACK_SIZE was originally 1344 in this test. The following
commit removed setting the stack size in the test:
commit 7b3cd7d371
Author: Cami Carballo <cami.carballo@intel.com>
Date: Fri Jul 26 10:59:16 2019 -0400
tests: net: increase stack size
However getting the default stack size on FRDM-K64F of 512 causes the
following panic:
FATAL: ***** BUS FAULT *****
FATAL: Stacking error
FATAL: Imprecise data bus error
FATAL: NXP MPU error, port 3
FATAL: Mode: Supervisor, Data Address: 0x20002ff0
FATAL: Type: Write, Master: 0, Regions: 0x8200
FATAL: r0/a1: 0x00000000 r1/a2: 0x00000000 r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x00000000 r14/lr: 0x00000000
FATAL: xpsr: 0x200002f4
FATAL: Faulting instruction address (r15/pc): 0x00000000
FATAL: >>> ZEPHYR FATAL ERROR 2: Stack overflow
FATAL: Current thread: 0x2000182c (main)
FATAL: Halting system
Bump stack back to original 1344 fixes the issue.
Fixes#18292
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The sys_mutex test doesn't seem to fit in 24kB of RAM anymore,
when building with user mode support (CONFIG_USERSPACE=y). We,
therefore, restrict it to platforms that have 32KB or more of
RAM. We also filter the test with ARCH_HAS_USERSPACE explicitly.
The alternative setup of the sys_mutex test, i.e. without user
mode support (CONFIG_TEST_USERSPACE=n) continues to build for
platforms with less than 32k of RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The command for generating offsets.h has only been depending on the
target for offsets.c.obj, and not the file offsets.c.obj itself. Both
are needed, as explained in "CMake: dependencies between targets and
files and custom commands"[0].
This patch adds the dependency and fixes#18301
[0] https://tinyurl.com/y2hgzjhx
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Reduce the RAM usage in two of the Bluetooth samples in order for them
to fit in the BBC Microbit's RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When in Low Power mode an LPN may receive messages sent by nodes other
than its friend during its brief receive window. These messages get
rejected by the transport layer. At some point in the future the LPN
will receive these messages from its friend, however they will have
already been added to the network message cache earlier.
When the transport layer rejects a message due to it being received from
a non-friend node while in Low Power mode it must be removed from the
network message cache so that it can be correctly received from its
friend in the future.
Fixes#17809
Signed-off-by: Rich Barlow <rich@bennellick.com>
The commit 1c7b668804 tried to fix
resending segments to the GATT bearer, however it got the buffer
refernce counting wrong. The bt_mesh_net_resend() function doesn't
own a reference to the buffer, i.e. it's not responsible for unrefing
it. E.g. bt_mesh_adv_send() takes its own reference.
What was missing however was the handling of the callbacks. Use the
recently introduced send_cb_finalize() helper to make sure they're
called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are several places that require the send callbacks to be called
immediately. Reduce the code a bit by introducing a helper for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPA timer should always be running, even with privacy supported by
the controller. In order to select an IRK to generate the private
the controller is instructed by provided an identity address.
If we want to advertise privately without providing an identity address
the host has to set the private address.
Fixes: #18150
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Several advertising options were not being picked into the
documentation due to missing doxygen markers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a dedicated entry for Bluetooth Mesh, and include Trond from
Nordic as an owner, since he will be actively participating in
maintaining & developing the code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When coming out of an exception, we need to mask interrupts
to avoid races when decrementing the nested count. Move
the instruction that does this earlier.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
'interrupt-parent' should contain just the phandle of the node
interrupts are sent to.
This node (gic: interrupt-controller@f9010000) doesn't generate any
interrupts, so the 'interrupt-parent' value is never used (this is why
it wasn't caught). It'll give an error later with 'interrupt-parent'
declared as 'type: phandle' in bindings though.
Don't know what was intended. Just remove the 0.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Mark the 'reset-gpios' property as optional. It was incorrectly set
as required and its not required for the driver to function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Mesh Profile Specification states in section 3.10.5 IV Update
procedure: "The IV Update procedure is initiated by any node that is a
member of a primary subnet", meaning if we're not on the primary
subnet we should not try to initiate the procedure.
Additionally this fixes initiating IV Update in all cases where the
sequence is updated, by putting the code into bt_mesh_next_seq().
Fixes#17977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This branch is inherited from old code that used to start the timer as
soon as a message was queued for transmission rather than when it was
actually transmitted (the case today). It'll also cause a race in case
the publication goes over the GATT layer since the "sent" callback
happens synchronously in that case.
Fixes#17821
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a check to make sure the hex file exists as that is what we utilize
in openocd to flash. If its missing we report that its likely due to
not having CONFIG_BUILD_OUTPUT_HEX set.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The GATT bearer is a reliable one so there should theoretically never
be a need to resend segments. If however for some strange reason the
proxy client doesn't immediately ack all segments we should do the
resending on the GATT bearer, rather than sending them over
advertising.
Fixes#17907
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add additional masking of the pins with fired callback triggers
against the currently enabled callbacks, in order to not call
handlers for callbacks that got disabled in some other callback
handlers that were called in the same ISR execution.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The code was incorrectly bailing out with "return 0" rather than
continue. Also, it was incorrectly making a reference to
tx->seg[seg_o] since when a PDU goes through the friend queue we don't
use the usual retransmission mechanism.
Fixes: #17932
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case a queued buffer is canceled before sending we have to unref
it, since that's what adv_send() would do as well.
Fixes#17936Fixes#18013
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile 3.6.7.2 Publishing Heartbeat messages:
"
Triggered publishing of Heartbeat messages is enabled by
the Heartbeat Publication Features state (see Section 4.2.17.5):
...
- If the Low Power bit is set to 1, a Heartbeat message shall be
published when the node establishes or loses Friendship (see Section
3.6.6.1).
"
Fixes#18194
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending heartbeat messages triggered by feature changes the code
was trying to look up the configured publication subnet, in an
apparent attempt to figure out if publication is enabled or not. A
more appropriate way is to check for the heartbeat publication
destination address, and since we have a helper function this can be
done in a single place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The heartbeat is a transport layer feature, so move it to transport.c.
This also opens the way to properly fix Friendship-established/lost
triggering for LPN role.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With CONFIG_LOG_IMMEDIATE, log output is printed immediately. If a
shell command is in progress, there's no prompt to erase, nor should
we print a new prompt after the log message is output.
Before this patch, a simple shell command like:
int cmd_log_erase(const struct shell *shell, size_t argc, char **argv)
{
LOG_INF("hello world");
return 0;
}
would output something like:
uart:~$ log erase
[00:00:02.623,718] <inf> cmd_log: hello world
uart:~$ loguart:~$
This patch fixes prompt handling while a command is active, and fixes
put_sync_hexdump to behave like put_sync_string.
Signed-off-by: Jim Paris <jim@jtan.com>
IPv4 connection management status is stored in wrong
variable. ip_state should hold the status and then
it should be stored in state variable.
Fixes#18253
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Fix missing interval min copy in bt_conn_set_param_le. Application is
unable to override BT_GAP_INIT_CONN_INT_MIN for interval_min.
Fixes: #17789
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
modem_socket_put() originally took an index as a parameter and was
later swapped to sock_fd as the reference.
The internal code was never updated to reflect that sock_fd isn't an
index -- it's a separate reference generated via z_reserve_fd().
Let's correct the modem_socket_put() logic.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18238
Reported-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Signed-off-by: Michael Scott <mike@foundries.io>
The detach function didn't call FLEXCAN_TransferAbortReceive.
The state of the mailbox after detaching was still kFLEXCAN_StateRxData
and therefore a new filter couldn't be attached.
This PR calls FLEXCAN_TransferAbortReceive and releases the mailbox.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The callback function and callback argument were not set when the
filter is attached, and therefore, the callback function was never
called. This commit sets the function and callback correct.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
We are trying to pass 64-bit value to the driver, but we only
allocate space for an integer. This will not work and will cause
invalid memory access.
Fixes#18205
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add information about supported protocols in PPP and link to
net-tools that contains information how to test ppp against
pppd running in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Only updated in headers that already had support for drivers built with
a C++ compiler.
The spi_dw.h file defines macros to declare functions, then uses them
within a file that may have out-of-tree overrides. In this case we
leave the including file extern "C" active for backward compatibility.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
The inclusion of the generated syscall files is placed outside the
extern "C" block as the generated file has its own extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The previous patch left some include directives hidden within the body
of the extern "C" block. Lift them out to the top of the file where
they're more visible.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The mcux pwm drivers use period cycles as a divisor to calculate the pwm
frequency in hertz. This operation can underflow easily with large
values of period cycles relative to the pwm clock source, causing the
driver to return an error code and the pwm_api test to fail.
Updates the test to use the smaller set of period and pulse cycles on
k64-based boards, fixing the test for frdm_k64f and hexiwear_k64 boards.
The test is not changed for i.mx rt boards because the pwm clock source
on these boards is much faster than on k64 boards, and thus the same pwm
frequency operation does not underflow.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This was allowed due to a misunderstanding:
foo = 'x';
In reality, 'x' works like an integer literal, and is used like this:
foo = < 'x' >;
Fix character literal parsing to match the C tools.
Also fix backslash escape parsing to match the C tools exactly
(get_escape_char() in util.c): \<char> should be turned into <char> if
<char> isn't recognized as a special escape character, instead of being
left alone. This fixes parsing of e.g. '\'' (a character literal with a
single quote in it).
Piggyback some more tests for weird property/node names.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Property type-checking has been pretty rudimentary until now, only
checking things like the length being divisible by 4 for 'type: array',
and strings being null-terminated. In particular, no checking was done
for 'type: uint8-array', letting
jedec-id = < 0xc8 0x28 0x17 >;
slip through when
jedec-id = [ 0xc8 0x28 0x17 ];
was intended.
Fix it by adding a syntax-based type checker:
1. Add Property.type, which gives a high-level type for the property,
derived from the markers added in the previous commit.
This includes types like TYPE_EMPTY ('foo;'),
TYPE_NUM ('foo = < 3 >;'), TYPE_BYTES ('foo = [ 01 02 ];'),
TYPE_STRINGS ('foo = "bar", "baz"'),
TYPE_PHANDLE ('foo = < &bar >;'), and TYPE_COMPOUND (everything not
recognized).
See the Property.type docstring in dtlib for more info.
2. Use the high-level type in
Property.to_num()/to_string()/to_node()/etc. to verify that the
property was assigned in an expected way for the type.
If the assignment looks bad, give a helpful error:
expected property 'nums' on /foo/bar in some.dts to be assigned
with 'nums = < (number) (number) ... >', not 'nums = "oops";'
Some other related changes are included as well:
- There's a new Property.to_bytes() function that works like accessing
Property.bytes, except with an added check for the value being
assigned like 'foo = [ ... ]'.
This function solves problems like the jedec-id one.
- There's a new Property.to_path() function for fetching the
referenced node for assignments like 'foo = &node;', with type
checking. (Strings are accepted too, as long as they give the path
to an existing node.)
This function is used for /chosen and /aliases.
- A new 'type: phandle' type can now be given in bindings, for
properties that are assigned like 'foo = < &node >;'.
- Property.__str__() now displays phandles and path references as they
were written (e.g. '< &foo >' instead of '< 0x1 >', if the
allocated phandle happened to be 1).
- Property.to_num() and Property.to_nums() no longer take a 'length'
parameter, because it makes no sense with the type checking.
- The global dtlib.to_string() and dtlib.to_strings() functions were
removed, because they're not that useful.
- More tests were added, along with misc. minor cleanup in various
places.
- Probably other stuff I forgot.
The more strict type checking in dtlib indirectly makes some parts of
edtlib more strict as well (wherever Property.to_*() is used).
Fixes: #18131
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, dtlib just stored the raw 'bytes' value for each property,
along with some markers in Property._markers for phandle and path
references.
Extend Property._markers to also remember where different data blocks
start, so that e.g.
foo = <1 2 3>, "bar", [00 01];
can be reproduced as written.
Use the new information to reproduce properties as written in
Property.__str__(). This gives good test coverage as well, since the
test suite checks literal __str__() output.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
the microchip,mcp2515 and microchip,enc28j60 bindings would hit the
following build error:
device tree error: dts/bindings/can/microchip,mcp2515.yaml (in 'reg'):
'category' from !included file overwritten
('required' replaced with 'optional')
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Selection of the HFRCO causes the SOC to stay at its power-up frequency
of 19 MHz. Switch to the HFXO to use the configured frequency.
Closes#17630
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Get things started for Zephyr 2.0 release notes.
Individual teams will update their appropriate sections.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
west completion is an extension command, and therefore requires the user
to be in a zephyr installation in order to be available.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
SPI3 clock info were missing and following macros were
not generated:
- DT_ST_STM32_SPI_FIFO_40003C00_CLOCK_BITS
- DT_ST_STM32_SPI_FIFO_40003C00_CLOCK_BUS
Signed-off-by: Armando Visconti <armando.visconti@st.com>
If there is more than one PWM than generate a define with a trailing
index for the PWM. This matches what we do for GPIOs.
So something like:
DT_PWM_LEDS_RED_PWM_LED_PWMS_CONTROLLER_0
DT_PWM_LEDS_RED_PWM_LED_PWMS_CONTROLLER_1
...
DT_PWM_LEDS_RED_PWM_LED_PWMS_CONTROLLER_<N>
Fixes#18171
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The callback might return more than length of data read.
It should return nothing more than read length requested.
Patch fixes this behavior.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The callback typedef was not documented. This documentation
which explains what behavior is expected from any implementation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Related to #17997, move an include out of a extern "C" block
Background:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Related to #17997, for the POSIX arch:
* Remove some unnecessary extern "C" and ifdef blocks
* Move an include out of one of these blocks
* Add a missing extern "C" block
Background:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Package "hub" has been renamed some time ago to "git-spindle".
Recently package with the same name "hub" has been released on PyPi
page, which causes installing pip requirements.txt to fail since
it is trying to install different package.
Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com>
* CONFIG_SMP can be enabled by smp application, e.g. tests/kernel/smp
* if application is not designed for smp, CONFIG_SMP can be disabled,
and the target works as a single processor.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Now when SMP support for ARC is available we may introduce a simulation
platform which might be used for testing & development for SMP setups.
One important note is stand-alone nSIM (as well as its "Free" flavour)
doesn't support SMP simulation so we have to switch to use of nSIM via
proprietary MetaWare debugger [1] and so:
1. We introduce new emulation target "mdb"
2. It's only possible to run that platform for those who
have MetaWare tools installed and valid license.
Though QEMU port for ARC is in work at the moment and once we
open that port and it has SMP support we'll switch to it and everybody
will be able to try ARC HS with SMP.
[1] https://www.synopsys.com/dw/ipdir.php?ds=sw_metaware
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Fix the pipeline prepare-resume implementation to correctly
handle multiple continuous events that request resume on
being pre-empted.
Symptoms of the bug being, when having continuous scanning,
and an active peripheral if a directed advertising is
started the peripheral event are not scheduled causing link
supervision timeout.
This is fixed by not having an enqueued resume event
prepared if there is an enqueued new non-resume event in the
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase pipeline size to accommodate probable multiple
prepare for directed advertising events, with reserved time
which are shorter than prepare duration, being enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the event start overhead time to accommodate for
processing time for dequeueing pipeline in Upper Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the maximum number of pending event done elements by
decoupling it from the maximum pipeline elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Disable controller filtering feature not used on mesh stack.
This reduces some RAM usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit includes the initial support of ARC HS Development Kit:
* hsdk soc support
* hsdk board support
* no mmu support, so no userspace
* smp support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In some hardware,e.g. ARC HS Development kit,the
peripheral space of ns16550 only allowes WORD
access, byte acess will raise bus error.
This commit adds support for this case
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* this is a simple sample to show how
secure applicaiton and non-secure application work
together. More details are in README.rst
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This adds support for SARA-U2 modems. They have different timings on
the PWR_ON pin, don't support AT+CESQ and require a manual GPRS
connection setup.
The VINT pin is used as a more reliable and faster way to power on the
modem.
Based on work by Göran Weinholt <goran.weinholt@endian.se>
Signed-off-by: Michael Scott <mike@foundries.io>
Let's convert the SARA modem to use the more generic modem context
layers so that we don't maintain a lot of what should be shared code.
This conversion includes:
- modem context as the helper umbrella
- uart modem interface layer
- generic command handler layer
- modem socket helper
- move from net_context offload API to socket offload API
Signed-off-by: Michael Scott <mike@foundries.io>
Many modems implement socket-based APIs to manage data connections.
This layer provides much of the groundwork for keeping track of
these "sockets" throughout their lifecycle (from the initial offload
API calls through the command handler call back layers):
- structure for holding socket data like IP protocol, destination,
source and incoming packet sizes
- configuration to note modem starting socket id and number of
sockets
- methods to get/put socket structs from/to the pool
- function to update the # and size of packets in the modem receive
queue
- prebuilt modem_socket_poll() method for socket offload poll() API
Example modem driver setup code looks like this:
/* socket data */
static struct modem_socket_config socket_config;
static struct modem_socket sockets[MDM_MAX_SOCKETS];
static int modem_init(struct device *dev)
{
...
/* setup socket config */
socket_config.sockets = &sockets[0];
socket_config.sockets_len = ARRAY_SIZE(sockets);
socket_config.base_socket_num = 0;
ret = modem_socket_init(&socket_config);
...
}
Signed-off-by: Michael Scott <mike@foundries.io>
This is a generic command handler implementation which uses the
supplied modem interface to process incoming data and hand it
back to the modem driver via callbacks defined for:
- modem responses
- unsolicited messages
- specified handlers for current operation
The individual modem drivers define functions as command handlers
via the MODEM_CMD_DEFINE() macro.
To use these handlers, a modem operation defines a series of
modem_cmd structures and passes them to the modem_cmd_send()
function. The modem_cmd includes data for:
- a matching string for when to execute the handler
- # of parameters to parse after the matching string
- delimeters for the parameters
Example modem driver setup code looks like this:
/* create modem context object */
static struct modem_context mctx;
/* net_buf receive pool */
NET_BUF_POOL_DEFINE(mdm_recv_pool, MDM_RECV_MAX_BUF,
MDM_RECV_BUF_SIZE, 0, NULL);
/* modem cmds */
static struct modem_cmd_handler_data cmd_handler_data;
static u8_t cmd_read_buf[MDM_RECV_BUF_SIZE];
static u8_t cmd_match_buf[MDM_RECV_BUF_SIZE];
/* modem response handlers */
static struct modem_cmd response_cmds[] = {
MODEM_CMD("OK", on_cmd_ok, 0U, ""),
MODEM_CMD("ERROR", on_cmd_error, 0U, ""),
MODEM_CMD("+CME ERROR: ", on_cmd_exterror, 1U, ""),
};
/* unsolicited handlers */
static struct modem_cmd unsol_cmds[] = {
MODEM_CMD("+UUSOCL: ", on_cmd_socknotifyclose, 1U, ""),
MODEM_CMD("+UUSORD: ", on_cmd_socknotifydata, 2U, ","),
MODEM_CMD("+UUSORF: ", on_cmd_socknotifydata, 2U, ","),
MODEM_CMD("+CREG: ", on_cmd_socknotifycreg, 1U, ""),
};
/* setup cmd handler data */
cmd_handler_data.cmds[CMD_RESP] = response_cmds;
cmd_handler_data.cmds_len[CMD_RESP] = ARRAY_SIZE(response_cmds);
cmd_handler_data.cmds[CMD_UNSOL] = unsol_cmds;
cmd_handler_data.cmds_len[CMD_UNSOL] = ARRAY_SIZE(unsol_cmds);
cmd_handler_data.read_buf = &cmd_read_buf[0];
cmd_handler_data.read_buf_len = sizeof(cmd_read_buf);
cmd_handler_data.match_buf = &cmd_match_buf[0];
cmd_handler_data.match_buf_len = sizeof(cmd_match_buf);
cmd_handler_data.buf_pool = &mdm_recv_pool;
cmd_handler_data.alloc_timeout = BUF_ALLOC_TIMEOUT;
ret = modem_cmd_handler_init(&mctx.cmd_handler, &cmd_handler_data);
Signed-off-by: Michael Scott <mike@foundries.io>
Initial support for modems in Zephyr use the following driver model:
- Main portions of code live in the modem specific driver.
This includes internal socket management, command parsing, etc.
- They leverage a UART-based modem receiver helper to gather data.
- Interface with Zephyr networking via net_context offload APIs.
This implementation was good enough to kick start interest in
supporting modem usage in Zephyr, but lacks future scalability:
- The net_context offload APIs don't allow for operations such
as offloaded DNS, SSL/TLS and other HW specific features.
- Since most of the code lives within the modem drivers, it's
very hard for the Zephyr community to improve the driver layer
over time. Bugs found in 1 driver probably affect others due
to copy/paste method of development.
- Lack of abstraction for different modem interfaces and command
handlers makes it impossible to write a "dummy" layer which
could be used for testing.
- Lack of centralized processing makes implementing low power modes
and other advanced topics more difficult.
Introducing the modem context helper driver and sub-layers:
- modem context helper acts as an umbrella for several configurable
layers and exposes this data to externals such as the modem shell.
Included in the helper is GPIO pin config functions which are
currently duplicated in most drivers.
- modem interface layer: this layer sits on the HW APIs for the
peripheral which communicates with the modem. Users of the modem
interface can handle data via read/write functions. Individual
modem drivers can select from (potentially) several modem
interfaces.
- modem command parser layer: this layer communicates with the
modem interface and processes the data for use by modem drivers.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17922
Signed-off-by: Michael Scott <mike@foundries.io>
The xlnx-zcu102 qemu machine is the only one that supports a Cortex-R
processor. However, its main CPUs are Cortex A53s which requires the
aarch64 qemu binary to run.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
This commit adds support for the Zynq UltraScale+ MPSoC as a qemu based
platform for Cortex-R based testing. This SoC only supports an
interrupt controller and serial port for limited testing.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Cortex R has a write buffer that can cause reordering problems when
accessing memory mapped registers. Use memory barries to make sure that
these accesses are performed in the desired order.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The GIC400 is a common interrupt controller that can be used with the
Cortex A and R series processors. This patch adds basic interrupt
handling for the GIC, but does not handle multiple routing or
priorities.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Provide a path for irq controller drivers to change properties of an
individual irq using priority and flags fields that come from the device
tree.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
When checking for total IP address counts, don't check
CONFIG_NET_IF_MAX_IPV6_COUNT twice. This was a typo for
CONFIG_NET_IF_MAX_IPV4_COUNT.
This was reported by IRC user: retfie
Signed-off-by: Michael Scott <mike@foundries.io>
Remove unused "system-clock-frequency" property, we don't have this
defined in various bindings and thus aren't using it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add "#address-cells" and "#size-cells" to the fixed-partition binding as
these are properties that may existing in the fixed-partition node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Change pwm device bindings to include both base and pwm.yaml. This
allow for flexibility for any nodes that might not need/utilize the
base binding.
* Added pwm.yaml to a few device bindings that were missing it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a clock.yaml that clock controller bindings should inherit
from. clock.yaml defines the properties "#clock-cells" which all
clock controllers should have.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't want any defines generated for the boolean
'gpio-controller'. So skip it in write_props if we see it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a gpio.yaml that GPIO controller bindings should inherit
from. gpio.yaml defines the properties "gpio-controller" and
"#gpio-cells" which all gpio controllers should have.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't want any defines generated for the boolean
'interrupt-controller'. So skip it in write_props if we see it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a intc.yaml that interrupt controller bindings should inherit
from. intc.yaml defines the properties "interrupt-controller" and
"#interrupt-cells" which all interrupt controllers should have.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is safer now that bt_conn_create_pdu can return NULL when using
syswq which can prevent things like signalling of L2CAP and ATT layers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since TX complete notification are dispatched with syswq blocking on it
can completely deadlock Bluetooth so this attempt to make it safe by
return -ENOMEM if that the current thread happens to be the syswq
thread.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use address based defines in the dts_fixup.h instead of DT_INST_ based
ones. The DT_INST_ will not get us the consistent mapping that is
needed (as we should assume the order of DT_INST_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is to support e.g. "<&adc 3>" in the device tree to create e.g.
DT_FOO_IO_CHANNELS_CONTROLLER = "ADC_0"
DT_FOO_IO_CHANNELS_INPUT = 3
Signed-off-by: Jim Paris <jim@jtan.com>
This is a direct search-and-replace copy of the PWM code.
The name is chosen to match Linux's iio-bindings.txt.
Signed-off-by: Jim Paris <jim@jtan.com>
In nRF9160 the reset pin is a dedicated one, it cannot be configured
as a regular GPIO pin, so this option should not be presented to users
building for this SoC, to not generate confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This driver makes use of the nRF RNG peripheral, so it can be used only
for SoCs that are equipped with one, and not all nRF SoCs are.
The option enabling the driver should then depend on `HAS_HW_NRF_RNG`,
which indicates the presence of this peripheral in a given SoC.
This patch removes also entries disabling this driver in default
configurations for nRF9160 SoC, as these were needed only because
of the invalid dependency of the ENTROPY_NRF5_RNG option.
A minor adjustment of Kconfig files of the nrf52_bsim board was
required as well, so that this board's configuration can properly
handle this corrected dependency.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
according to high-level design,in user mode software-triggered system
fatal exceptions only allow oops and stack check failure
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
exception, different with irq offload, may be raised interrupt
handling, e.g.
* z_check_stack_sentinel
* wrong code
we need to add specific handling of this case in exception handling
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
after appling the new "_get_curr_cpu_irq_stack" in _exc_entry,
the caculation of exception stack is wrong, this will
cause stack overflow, make the exception handling corrupt.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move when we early out for properties that start with # like
"#address-cells" or end with -map like "interrupt-map" to after we do
some error checking. This allows us to check those properties at least
exist if they are required.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The nxp,kinetis-sim is shared by 2 SoC familes and on one of them
its not used for clocks. As such that SoC will not have a #clock-cells
property so mark it optional.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The binding for st,stm32-timers specifies #address-cells and #size-cells
as required but no dts files that have st,stm32-timers specify these
properties. Remove them from the binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Code snippets show misleading example of read_callback usage
in h_set handlers.
This patch aligns snippets to implemented behavior.
fixes#15451
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add shell commands to add and remove devices from the shell.
Add commands and options to use whitelist for advertising, scanning,
and creating connections.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add whitelist support in the bluetooth host.
Supported features:
- Advertising with whitelist on scan requests, connect request ,or both
- Scanning with whitelist
- Creating connections using a whitelist (Auto connection procedure).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This emulates a RISC-V in 64-bit mode on a SiFive FE310 dev board.
Memory is tight so a few tests had to be disabled due to the extra
memory usage compared to qemu_riscv32.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
For now we enforce the medany code model for 64-bit builds as we get
reloc issues otherwise. The instruction set and ABI are also set to
soft-float usage.
The ilp32 ABI is explicitly specified on 32-bit build to make sure
it is not using a wrong default if the same toolchain is used for both
32- and 64-bit builds. The archittecture options are the same as the
SDK's riscv32 toolchain default in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support for driving the on-board LEDs present on the NXP TWR-KE18F
development board using FlexTimer (FTM) PWM modulation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use clock specified in the device tree for obtaining the source clock
frequency for the pwm_mcux_ftm driver instead of relying on having an
NXP Kinetis MCG clock available in all SoCs supporting FlexTimer (FTM)
modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit changes the Link-Layer Address Option length calculation
from hardcoded values to a numerical rounding up to full 8.
The length is calculated according to rfc4861 section 4.6.1.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Allow Security level HIGH and FIPS to be initiated when we have received
OOB data for the remote device. The security property of MITM is allowed
if out of band authentication data is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update bluetooth help text to include FIPS level in help text.
Also validate input range for the different connection types
Bluetooth security level for LE is from 1-4, while BR/EDR is 0-3
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Follow the approach of newlib to use a file sys/_types.h to specify the
underlying type for POSIX/libc types that must be provided in multiple
headers. The identifier for this type is in the reserved namespace.
Use this type rather than a specific standard type in all headers that
need to provide the type under its public name.
Remove the inclusion of <sys/types.h> from headers that should not bring
in all symbols present in that header, replacing it with the standard
boilerplate to expose the specific symbols that are required.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
time_t and suseconds_t are defined in time.h and sys/types.h. Handle
the duplication by adding ifdef protection around them similar to what
is being done for other types.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The number of MPU regions appears to be 16 instead of 8,
so we fix that in the board .dts files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For users that have an older version of west already installed, it is
useful to include `-U` in the getting started guide, otherwise the
instructions will fail to work depending on the state of the machine.
Fixes#18132
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'keys' is really a dictionary of options (like {"type": "int", ...}) for
a property. Calling it 'options' makes it clearer.
Also s/prop/prop_name/.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Perform OTP override when selecting 32Khz internal oscillator
to ensure 32KHz is enabled.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Use hex file for flash command, instead of elf file. This allows to
flash signed firmware, which is not available in elf format, by
specifying --hex-file command line argument.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far zephyr.elf file was hardcoded in cmake files. Remove it from
there and use cfg.elf_file from python, which can be overwritten by
specifying --elf-file command line option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add new tests that make sure that sendmsg() works when using
connected UDP socket and when not setting msghdr destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the UDP socket is connected, then allow the user to leave
out the remote address in msghdr struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We want to use the riscv64 toolchain across the board for RISC-V. That
requires a min of the 0.10.2 SDK, so bump the version before we make
that change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit includes tweaks in several tests, so
that the tests can be passing on ARM QEMU targets,
mps2_an385 and mps2_an521 with Qemu 4.x release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update SDK version to 0.10.2 to pick up new qemu and risc-v support.
Use Docker image 0.8.1 that includes an install of that SDK version.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
dtlib is meant to be general and anything-goes re. property values, but
edtlib can be pickier. Check that all 'status' properties have one of
the values listed in the devicetree specification
(https://www.devicetree.org/specifications/), and error out otherwise.
This will get rid of the 'status = "ok"'s (should be "okay") that keep
cropping up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit a84ded74ea ("dts: Replace status = "ok" with
status = "okay""), for newly introduced stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Route these to the equivalent pins for RXD1 and TXD1 on the Arduino
Mega.
Note that uart0 is routed to the debug probe IC on the nRF9160
DK, and uart1 is routed to where the RXD0 and TXD0 Arduino pins are on
the DK. This makes RXD1/TXD1 a logical place to put these UART pins,
since the header layout for the DK board matches the Arduino mega.
This is also necessary to keep some downstream code compiling which
needs to enable the UART2 but doesn't have a good place to put these
pins, since the new DTS parser is enforcing that all required
properties (like tx-pin and rx-pin in this case) are set for nodes
with status = "okay".
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This adds a basic app which puts some rectangles on the display
It's hard to write an equivalent README to the rest of the sample
documentation, as the LCD I have uses a custom board thrown together for
testing. (ie other LCDs have publicly available modules)
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
This adds a driver for st7789v lcd controller, and TL019FQV01 lcd.
The bulk of the driver is based on the existing ili9340 driver.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
NRF_UICR needs to be defined for nRF9160 SoC in
nrfx_config_nrf9160.h, because it is not defined
in nrfx/hal/mdk/nrf9160.h (as it is a Secure-only
peripheral).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Authentication using OOB data uses the on-air device addresses used
during connection setup. So we need to check against the on-air
addresses in the info object to see if we have correct OOB data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue with registering authentication callback handlers failing
without notifying the user of the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the src and dst naming to refer to the identity addresses of the
connection. Keep the device addresses used during connections but rename
them to local and remote instead.
Update documentation to be more descriptive.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added tests of flash driver compatibility with fcb-backend.
For flash drivers which support write-block-size bigger than 1 B
test of unaligned data access uses native write-block-size
as it is dedicated to check whether settings works well on platform
which has 1 B access which is native on the current DUT.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This is no longer needed after using
zephyr_interface_library_named cmake directive in the POSIX subsys
source itself.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Similar to how other sub-libraries are defined in Zephyr tree, e.g.
"fs", "lgvl", etc. This is supposed to help with the need to
explicitly add posix include path to each and every application using
POSIX subsys.
Fixes: #15627
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is consistent with how newlib headers are treated, and will
have effect of ninlibc headers to be further down in the include
order. This is important, because some POSIX subsys headers
override those of libc. Without this change, we can't streamline
POSIX build config using zephyr_interface_library_named() cmake
directive, because includes will be in wrong order.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To let any other zephyr_system_include_directories() directives
act first and get these paths in an order allowing Zephyr's stuff
override compiler headers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Historically, it used to be "PTHREAD", which is no longer true, as
POSIX subsys offers much more functionality than just Pthreads. Use
detailed name, like "posix_subsys", to avoid possible confusion with
ARCH_POSIX-related matters.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
- Commands were not gathered with the right macro
- bus fault access due to wrong declaration of iface_states external
variable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds a sample configuration for 6LoCAN to the
echo_client and echo_server example.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The network to host byte order conversion is actually in place
on the network buffer. This prevents the reuse and forwarding of
RA packets. This commit uses temporary variables instead.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds support for a 6LoCAN Ethernet border translator.
CAN frames with the translator CAN address are translated and forwarded
to Ethernet. Ethernet frames with the first 34 bits matching the MAC
address of the translator are translated and forwarded to 6LoCAN.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Take the targer link layer address option link laxer addres lenght
from net packets source addres instead if the interface.
This is usefull for 6LoCAN border translator (6LoCAN to Ethernet).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit implements net_pkt_shallow_clone. A shallow clone clones
the net_pkt but not the buffers. The buffers are only referenced and
therefor only freed when both copies of the net_pkt are freed.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commits adds support for reception of packets thats comes from
a Ethernet to 6LoCAN translator. This packets carry the Ethernet
MAC address (6 bytes) inline in the FF (First Frame).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
subsys/bluetooth/host/Kconfig.gatt is already sourced within an
'if BT_CONN' in subsys/bluetooth/host/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- update doc for different core configuration.
- fix some bugs in dts related files.
- add dts config and defconfig for different core configuration.
- end files with a newline in boards/arc/emsdp/board.dtsi
- remove unused head in boards/arc/emsdp/doc/index.rst
- ARC_MPU_VER in different core is fixed. so remove some useless code
for ARC_MPU_VER judgements in Kconfig.defconfig.* files for emsdp
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Enable Mailbox support on 96Boards Avenger96 board. This will help
communicating to CortexA7 core.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Add onboard LEDs on 96Boards Avenger96 board. There are 4 user LEDs
on this board but only 3 are enabled. This is due to the fact that
LED0 is connected to unavailable PortZ. Hence, LED0 is ignored and
remaining LEDs are enabled starting from index 0.
Once PortZ is added, this will be fixed.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Fix the mandatory and optional parameter counts for the
directed adv shell command definition. Also, refactor the
command for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It is possible that cmake in civetweb influenced the rest of the build
process, as described in #17996.
Right now only cmake version amd "project" directive is executed when
building from Zephyr but not requesting CONFIG_CIVETWEB.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Added test for check behavior on deleting existent entry,
nonexistent entry and already deleted entry.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
No need to write deletion entry for non-existing entry.
Furthermore such a write to filled up storage will make another
writes impossible as it occupied delete nvs_ate space, but it
does not remove anything.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
During initialization NVS analyzes open sector for
find write addresses. It was possible to infinite loop
in case when there was no space for any new ATE in the sector.
This patch introduce check for space available in the sector which
fix the issue.
fixes#17891
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
NVS always leave space for deletion ate in a full sector.
Even that it was not possible to write delete nvs_ate to the
full sector. Because of that it was possible to fill up NVS,
and be able to delete nothing.
This patch introduce recognition of case
the delete ate is writing, and allow to write such nvs_ate to
opened full sector.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check wheter initialization works well when nvs
storage is full filled. Test also check weheter can delet any
entry from full filled NVS.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since commit c535300539 ("drivers/timer: New ARM SysTick driver"),
_NanoIdleValGet and _NanoIdleValClear have been unused.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
If sendmsg() is used for TCP sockets, the msghdr->msg_name is not
really used as the socket must already have been connected.
In that case just get the destination address directly from
net_context remote address field.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The snps,designware-intc.yaml and xtensa,intc.yaml define a required
property snps,num-irq-priority-bits that isn't defined in any .dts
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After witnessing some strange errors with memory not being
what it should be, lifiting everything above 1MB has solved
it. The Zephyr binary was being loaded into memory containing
reserved regions, resulting in data corruption.
We still simulate XIP for testing purposes by setting up the
memory map as follows:
0x000000 - 0x0FFFFF : Non-present
0x100000 - 0x4FFFFF : "Flash" ROM region
0x500000 - 0x8FFFFF : "SRAM" RAM region
For a total of 9 megabytes of physical RAM used.
Fixes problems observed in some large tests when code coverage
is enabled (which increases the amount of RAM used even more).
Fixes: #17782
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Assembly language start code will enter here, which sets up
early kernel initialization and then calls z_cstart() when
finished.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Removes very complex boot-time generation of page tables
with a much simpler runtime generation of them at bootup.
For those x86 boards that enable the MMU in the defconfig,
set the number of page pool pages appropriately.
The MMU_RUNTIME_* flags have been removed. They were an
artifact of the old page table generation and did not
correspond to any hardware state.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix assert in the RPA timeout when no resolving entry exists in the
resolving list, and the advertiser was requested to use a local IRK
to generate it's own address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We should only assume a GPIO specifier is either named <FOO>-gpios or
gpios. Any other form like ngpios should not be considered a GPIO
specifier. especially since 'ngpios' is the standard property name for
the number of gpio's that are implemented.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This needs further design work due to problems with logging
C strings. Just send always to printk() for now until this
is resolved.
Fixes: #18052
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If no callback for oob data request is registered, or the user decided
to abort authentication during OOB data request, we should return the
error code for no OOB data available to indicate that the user does not
have the correct OOB, or no OOB interface at all.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix kernel crash if bluetooth authentication handlers has not been
registered. The bt_auth object is then NULL, this dereference caused a
call to an invalid function pointer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Previous ATE searching is accelerate by reading sector
close ate, which allow to skip reading whole storage.
ATE is already covered by crc8. That patch introduce
check on correctness offset read form close ate. This
increases meta-data integrity check level.
This also preserves against possible looping when read
incorrect or not a NVS storage image.
fixes#16899
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This will handle BTP Discover All Primary Services command.
Related TC: GATT/CL/GAD/BV-01-C
Fixes: #17861
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Most of the logic for initializing 'clocks' and 'pwms' is the same and
can be shared. Add an EDT._simple_phandle_val_list() helper function for
initializing 'clocks', 'pwms', and any other properties on the form
<foo>s = <phandle value phandle value ...>
where the nodes pointed at by the phandles are expected to have a
'#<foo>-cells' property.
This should make it easier to add similar properties.
There's still some code duplication in the classes (PWM, Clock, etc.),
but also some differences, so I'm wondering if requiring a class for
each might be okay. Maybe some more class-related stuff could be
factored out later.
Piggyback some related cleanup:
- Have _phandle_val_list() take the name of the #foo-cells property
instead of a function for fetching the value. The pattern is always
the same.
- Have _add_names() just take the "foo" part of "foo-names". Same
pattern everywhere.
- Clean up some redundant comments for stuff that's already documented
in docstrings
- Fix error messages printed by _named_cells() ("GPIOS controller" ->
"GPIO controller", etc.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code was already rejecting the key, however that rejection
happened only after we had already sent our public key as response,
which got interpreted as acceptance by the tester (PTS).
This fixes issue that d4fd267086
supposed to fix. The problem is bt_dh_key_gen is async.
Local public key cannot be sent from the same context
the bt_dh_key_gen is called because we don't know yet
if remote key is valid.
Fixes MESH/NODE/PROV/BI-13-C.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
With the new DT checks the dts bindings for "nxp,flexpwm" and
"nxp,imx-pwm" had old conventions that we now treat as build errors.
Additionally fix the number of #pwm-cells for "nxp,imx-pwm" to be 1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixed error 'The int symbol BT_DISCARDABLE_BUF_COUNT is being evaluated
in a logical context somewhere'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
subsys/bluetooth/host/Kconfig.l2cap is already sourced within an
'if BT_CONN' in subsys/bluetooth/host/Kconfig, so BT_DEBUG_L2CAP does
not need a 'depends on BT_CONN'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Find by type does only accept a UUID with the same length as the UUID
which is stored in the internal list. If a UUID is stored in the short
16 bit format then a request with 128 bit UUID will fail.
Add support for the missing formats.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
GPIO_HT16K33 is defined in drivers/gpio/Kconfig.ht16k33, which is
source'd within an 'if GPIO' in drivers/gpio/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The maximum period a PWM controller can generate depends on its input
clock and its resolution (16-bit, 32-bit...). Setting a 1s max period
generates error with some hardwares (mimxrt1064_evk) because of clock
limitation.
This patch fixes this issue by calculating maximum period of the PWM
device to adjust max and min periods accordingly.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
i.MX RT10XX processors have four eFlexPWM modules, each containing
four 2-channels PWM submodules.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
For OpenVega board, in the case of the Zero Riscy core,
the flash partition used for the code and data is the
M0 ARM core's 256KB flash region. This is closest to
the RISC core.
The m0_flash node defines where the interrupt vector
is located for the Zero Riscy core, and one needs to
restrict the application so its interrupt vector is
placed accordingly.
Fixes: 34b0516466 ("boards: riscv32: rv32m1_vega:
enable MCUboot for ri5cy core")
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
TX1 and TX2 buffer empty busy flags would have been cleared only for
TX0 empty interrupts and there would have been extra unwarranted
TX callbacks for TX1 and TX2 if the callbacks had previously been used.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
A few of these headers are currently empty and provided to avoid
compiler errors when building existing software.
This set of headers is what is required to build
https://github.com/open62541/open62541 with Zephyr.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
* modify the reset flow for SMP
* add smp related initialization
* implement ipi related functions
* implement thread switch in isr/exception
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* use global free running counter as global wall clock (clock source)
* use arc internal timer 0 as local time event (clock event)
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* arc connect is a component to connect multiple arc cores
* it's necessary for arc smp support
* the following features are implemented
* inter-core interrupt unit
* gloabl free running counter
* inter-core debug unit
* interrupt distribute unit
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
DISK_SDHC_VOLUME_NAME is already defined within an 'if DISK_ACCESS_SDHC'
block, so the 'depends on DISK_ACCESS' is redundant.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The ESPI_PERIPHERAL_* symbols are surrounded by an
'if ESPI_PERIPHERAL_CHANNEL' in the same file, so no
need to put 'depends on ESPI_PERIPHERAL' on them.
'if' is just a shorthand for 'depends on'.
Also remove a redundant 'if ESPI' from ESPI_XEC.
drivers/espi/Kconfig.xec is sourced within an 'if ESPI' in
drivers/espi/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
FLASH_NATIVE_POSIX is defined in drivers/flash/Kconfig.native_posix,
which is source'd within an 'if FLASH' in drivers/flash/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
FLASH_SIMULATOR is defined in drivers/flash/Kconfig.simulator, which is
source'd within an 'if FLASH' in drivers/flash/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
ETH_LITEETH is defined in drivers/ethernet/Kconfig.liteeth, which is
source'd within a menu that has 'depends on ETH_LITEETH', in
drivers/ethernet/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- k_sys_fatal_error_handler() can return on all platforms,
indicating that the faulting thread should be aborted.
- Hang the system for unexpected faults instead of trying
to keep going, we have no idea whether the system is even
runnable.
Prevents infinite crash loops during tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix an issue in the SMP identity distribution where the IRK for the
default identity was always distributed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There's desire to be able to customize parameters on a per-filesystem
basis, which means we need a way to override the Kconfig defaults which
are global. This also means the littlefs data structure cannot own the
cache and lookahead buffers.
Switch to using a macro to define the littlefs data structure. The
default version uses the Kconfig constants. A custom one takes
arguments providing the most likely partition-specific parameters.
Finally the user is free to bypass the helper macros and set any
parameters desired, though validation is limited and only present when
CONFIG_DEBUG is enabled.
Extend the test suite with a performance module, which confirms that
these settings have an impact proportional to the log of changes to the
cache or IO sizes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Existing file system implementations do not provide the special "."
(current) and ".." (parent) directory entries in the readdir results.
littlefs does.
Remove these entries in the abstraction layer. This simplifies code in
higher level consumers that aren't prepared to see them. Consumers like
FUSE that need them can put them back without having to worry about
conflicts.
Closes issue #17951
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The previous way of creating an absolute path relied on snprintf(), and
when used with newlib gcc warned that the output could be truncated
before the last format character. Rework to use code that doesn't rely
on snprintf.
See discussion at https://bugzilla.redhat.com/show_bug.cgi?id=1431678
Also ensure that cwd is always NUL-terminated, and use the utility
function to create the absolute path in cmd_trunc.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for the littlefs file system in the fs shell. Update
the sample to use the same partition configuration as the littlefs
example for the SPI NOR test platform.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
littlefs is a fail-safe filesystem from ARM Mbed that has wear-leveling
capabilities.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Jim Paris <jim@bolt.io>
Zephyr verifies if it is built from a west-initialized directory.
The message changed in west@c08061cef1c7b0e19a58a82db731098e2f4bba4a.
Closes#18034.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is expressed that the BOARD depends on whether NONSECURE is enabled
or not. But it is the other way around. Depending on the selected
board, it may or may not be possible to enable/disable NONSECURE.
The dependency is going in the wrong direction, this reversed edge is
observed to be able to create a cycle in the dependency graph.
Fix the dependency by removing it.
It is left as future work to enforce that enabling/disabling NONSECURE
is done in a way that is compatible with selecting
BOARD_NRF9160_PCA10090 vs BOARD_NRF9160_PCA10090NS.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The lsm6dso driver was in pre-merging state when a614a026
was committed. So, let's make the modification manually.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit implements timestamps for receiving frames on the
NXP MCUX FlexCAN CAN driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit introduces a timestamp for received CAN frames.
The timestamp is optional and can be activated via Kconfig.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The "{d,i}ccm" nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are {d,i}ccm.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The true mmio-sram nodes should not have had a 'device_type' property.
Remove it from the cases that we clearly know are SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug introduced by: 45da629b24
Mistakenly set the own address type to the destination address type.
Also this uses the RPA_OR_RANDOM in case local IRKs exists in the
controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is related to findings in #17997 and changes network related
header files to have include files outside of extern "C" { } block.
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This dts binding file remained out from 0ec0c84808 commit, because
it was still in the pre-merging status.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a new test for unlocking nested scheduler lock. Make sure that
k_sched_unlock() isn't unconditionally a preemption point.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
The scheduler lock is a nestable lock. Unlocking a nested,
still-having, lock shouldn't preempt the current thread.
k_sched_lock();
k_sched_lock();
k_sched_unlock(); /* <--- this shouldn't be a scheduling point */
k_sched_unlock(); /* <--- this is a scheduling point */
This commit changes the preempt_ok argument from 1 to 0. This let
should_preempt() check whether it should preempt at the point or not.
This fixes#17869.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
The NSIM_HS target should have had the fpu flag to the compiler be:
-mfpu=fpud_all. Otherwise we get a build error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the open coded section attribute by Z_STRUCT_SECTION_ITERABLE()
to properly align structure instances on 64-bit targets.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The net_context_send API documentation was missing the fact,
that the callback might be called after the net_context_send()
has returned. Also currently the timeout value is not used properly
anywhere in the code. This is left like this as there is not much
use for the timeout value atm. This might be fixed later if there
is proper use case for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr codebase standardizes in UTF-8 as file encoding. To
accommodate this, we explicitly pass encoding="utf-8" to Python's
open() function, to be independent of any locale setting of a
particular system (e.g., CI/build systems oftentimes have "C",
i.e. ASCII-only, locale). In a few places, we lacked this parameter,
so add it consistently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The 'registered' flag was not cleared when 'gatt metrics off'
was called so that one was unable to register the service again.
Remove 'registered' variable that is actually not needed as there
is no tracking if service is already registered in similar
cmd_register_test_svc command. If the service is already registered,
the host will log an error.
Fixes: #17882
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add SPI support for stm32mp157c_dk2 board. If SPI is selected, SPI4
(Arduino connector compatible SPI) and SPI5 (on front 2x20 GPIO
expander) will be enable by default on stm32mp157c_dk2 board.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Abstract some SPI LL function call for future driver compatibility with
a new SPI peripheral version (introduced with STM32MP1x and STM32H7x
SoC)
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This commit solves an issue where the NSS must be set before the
mode on the stm32mp157c_dk2, else LL_SPI_SetMode won't affect the
mode registry.
stm32mp1x (and stm32h7) LL function SPI_Init seems to also define
first the NSS then the mode, unlike other STM32 boards where this
is not specified.
Changing the order shouldn't have bad repercussions on other boards,
ZephyrnSPI driver test has been passed successfully on disco_l475_iot1
board.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
(This could not be triggered in the nrf52_bsim yet,
so just so it is fixed for the future)
Properly handle converting back and forth from absolute to HW
time when either of those is set to TIME_NEVER
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The old link seems not to work anymore, so instead replace it with an
invitation link freshly generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
An issue was seen after changes introduced in #17933.
The net_context callback was run after we checked that it
was run ok. This test failed of course in that case. Simple
solution is to k_yield() which will make sure that the
callback gets called before we continue. This works for this
test as our threads have suitably selected priorities.
There is also no need to use K_NO_WAIT here so replacing the
timeout with K_FOREVER.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pytest.raises context manager is now returning an ExceptionInfo
whose str() doesn't contain the str() of the underlying exception
object. Take str(e.value) directly to make sure we're looking at the
exception string.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Now that the runners package no longer depends on west, we can move
the documentation for it from the orphan west-apis.rst page to the
build-flash-debug.rst page that documents the west extension commands
which use that package.
(This is a more logical place for this information, but it was
previously not possible to put it there since we must be able to build
the documentation on a system without west installed, excepting
content in west-apis.rst. Removing the dependency means the runners
automodule directive can safely appear in build-flash-debug.rst.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
SPI NOR devices require that writes be performed within only one page at
a time. There is no such limitation on reads. Remove the code that
forced reads to be performed in 256-byte chunks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The code failed to increment the address after completing a partial
write, causing writes that cross a page boundary overwrite at a page
level.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The message talks about seconds but displays ticks. Adjusting the
parameter to convert ticks to seconds then. But also adding the ticks
since it is a valuable information when testing counter devices.
Fixing small style issue (parameter indentation) as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
System clock for m4 core was set to same clock as m7 core.
This is wrong as m4 its value is actually based on clock frequency
value after D1CPRE (sys_d1cpre_ck) divided per HPRE value, 200MHz in
current case.
This also matches the max clock speed for the m4 core (200MHz)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
cores
In order to prevent potential misconfiguration set the clock setting,
which impacts both cores, under board.defconfig file which is used
by both core.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Makes the code that defines stacks, and code referencing
areas within the stack object, much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, context switching on x86 with memory protection
enabled involved walking the page tables, de-configuring all
the partitions in the outgoing thread's memory domain, and
then configuring all the partitions in the incoming thread's
domain, on a global set of page tables.
We now have a much faster design. Each thread has reserved in
its stack object a number of pages to store page directories
and page tables pertaining to the system RAM area. Each
thread also has a toplevel PDPT which is configured to use
the per-thread tables for system RAM, and the global tables
for the rest of the address space.
The result of this is on context switch, at most we just have
to update the CR3 register to the incoming thread's PDPT.
The x86_mmu_api test was making too many assumptions and has
been adjusted to work with the new design.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current API was assuming too much, in that it expected that
arch-specific memory domain configuration is only maintained
in some global area, and updates to domains that are not currently
active have no effect.
This was true when all memory domain state was tracked in page
tables or MPU registers, but no longer works when arch-specific
memory management information is stored in thread-specific areas.
This is needed for: #13441#13074#15135
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Need to enumerate the constraints on adding a partition
to a memory domain, some may not be obvious.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These turned out to be quite useful when debugging MMU
issues, commit them to the tree. The output format is
virtually the same as gen_mmu_x86.py's verbose output.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently page tables have to be re-computed in
an expensive operation on context switch. Here we
reserve some room in the page tables such that
we can have per-thread page table data, which will
be much simpler to update on context switch at
the expense of memory.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Has the same effect of catching stack overflows, but
makes debugging with GDB simpler since we won't get
errors when inspecting such regions. Making these
areas non-present was more than we needed, read-only
is sufficient.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some options like stack canaries use more stack space,
and on x86 this is not quite enough for ztest's main
thread stack to be 512 bytes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Populate thread->stack_obj earlier in the thread initialization
process such that it is set when z_new_thread() is called.
There was nothing specific about its position, or the rest of
the code in that CONFIG_USERSPACE block, so just move it all up..
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add the serial wire JTAG configuration of the stm32f1x family.
Before gpio is initialized, you can choose to turn off the debug pin to
make the used pins available.
Signed-off-by: Findlay Feng <i@fengch.me>
It's been annoying that there was no convenient way to get back to the
documentation home page. There is a link in the breadcrumb trail at the
top of the page, but folks didn't notice that. This PR adds a
"Documentation Home" link at the top of the left-nav menu.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The sector size is 0 will pass "fs->sector_size % info.size" then start
a loop in nvs_startup() and never return. So retrun an error if the
sector size is 0.
Signed-off-by: Harry Jiang <explora26@gmail.com>
Modify mqtt_publisher sample to use mqtt_client_set_proxy().
Removed CONFIG_MQTT_LIB_SOCKS based setup.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 based connections in mqtt are only
TCP (nonsecure) based. To support TLS based SOCKS5
connections, new methods needs to be introduced.
Instead, removed CONFIG_MQTT_LIB_SOCKS based implementation.
And now mqtt provides an api to set proxy
(mqtt_client_set_proxy()) details. That's enough,
socket layer will take care of making connections through
proxy server.
Fixes: #17037
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 implementation is above socket level and every
higher layer protocol or application level needs to have
SOCKS5 related changes. This solution is based on socket
setsockopt(). Application caller has to set proxy details
through setsockopt() and socket:connect() will take care
creating connection.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The init addr should contain the on-air address used to establish the
connection. The dst address contains either the current RPA of the
unknown peer, or the identity address after identity information has
been exchanged.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The string "xx:xx:xx:xx:xx:xx (random-id)" is 30 characters including
zero termination.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The SDK version is of the form X.Y.Z. Change the cmake scripts to be
based on X.Y of the version. This allows us to easily support newer
toolchains without having to explicitly add cmake files for the version
as well as removes duplication between those files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix an issue where the generated identity was not permanently stored.
This resulted in being unable to reconnect after bonding when using
privacy, since a new local IRK was generated on reboot.
When settings is enabled the application is responsible for loading
identities and possible creating its own identities.
When settings_load is called and no identities has been created or found
in persistent storage a new identity will be created.
Since bt init has not been finalized bt_id_create will not make a call
to bt_settings_save_id. So we need to make sure that this identity will
be stored.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
STM32 clock control subsystem allows to configure a different
frequency value for core clock (SYSCLK) and AHB clock (HCLK).
Though, it is HCLK which is used to feed Cortex Systick timer
which is used in zephyr as reference system clock.
If HCLK frequency is configured to a different value from SYSCLK
frequency, whole system is exposed to desynchro between zephyr clock
subsytem and STM32 HW configuration.
To prevent this, and until zephyr clock subsystem is changed to be
aware of this potential configuration, enforce AHB prescaler value
to 1 (which is current default value in use for all STM32 based
boards).
On STM32H7, enforce D1CPRE which fills the same role as ABH precaler.
On STM32MP1, the equivalent setting is done on A7 core, so it is
not exposed to the same issue as long as SYS_CLOCK_HW_CYCLES_PER_SEC
is set with the 'mlhclk_ck' clock frequency value. Update
matching boards documentation.
Fixes#17188
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add two bindings
test-bindings/multidir.yaml
test-bindings-2/multidir.yaml
and a new test-multidir.dts with two nodes that use them.
Verify that the two bindings were found by checking the
Device.binding_path attribute for the two device nodes.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gen_defines.py and edtlib.py were recently added in
commit 62d5741476 ("dts: Add new DTS/binding parser").
The old extract_dts_includes.py script allowed for multiple
dts bindings dirs. Let's add that functionality to the new
scripts as well.
Signed-off-by: Michael Scott <mike@foundries.io>
There are two aspects to this: CPU registers are twice as big, and the
load and store instructions must use the 'd' suffix instead of the 'w'
one. To abstract register differences, we simply use a ulong_t instead
of u32_t given that RISC-V is either ILP32 or LP64. And the relevant
lw/sw instructions are replaced by LR/SR (load/store register) that get
defined as either lw/sw or ld/sd. Finally a few constants to deal with
register offsets are also provided.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
These defines are specific to the Cortex-M. Move them to their own
header file to prepare for Cortex-R support.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The ARM specific _impl_k_thread_abort function only applies to Cortex-M
so move it to the cortex_m specific directory.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Even one liner if () statement should have braces.
Fixing parameter indentation as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on how compiler is built, it prints a different include
directory with `--print-file-name=include`. What we want, instead, is
directories with `stddef.h` and `include-fixed/limits.h`.
This commit explicitly specify the header files we want to use, then
take the directory from the returned path.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
This abstracts the interface for generation of the strip command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the readelf command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the objdump command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the objcopy command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Commit ee4c23cc1f ("CMSIS v2: Work around time unit confusion")
enforced CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000 on this test, but the
m2gl025_miv platform has some issues with it. Let's exclude it for now.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Commit 33c64c2578 ("tests/cmsis_rtos_v1: Correct timing assumptions")
introduced a stricter criteria where time spent has to match the clock
within 1% discrepancy. It is zassert_true(diff < max && diff > min)
meaning _less than_ 1%.
The test uses a 1-second delay. When SYS_CLOCK_TICKS_PER_SEC=100 that
means a single tick discrepancy would overflow the test.
Let's be inclusive and allow up to 1% instead. That allows for this
test to pass on m2gl025_miv when using 100 ticks per sec.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add a new sifive,plic-1.0.0 binding that inherits from the riscv,plic0
binding. The new binding adds a required riscv,ndev property, which
gives the number of external interrupts supported.
Use the new binding for microsemi-miv.dtsi (with a value of 31 for
riscv,ndev, from http://www.actel.com/ipdocs/MiV_RV32IMAF_L1_AHB_HB.pdf)
and riscv32-fe310.dtsi (which already assigns riscv,ndev).
Also remove a spurious riscv,ndev assignment from
riscv32-litex-vexriscv.dtsi.
Also make edtlib and the old scripts/dts/ scripts replace '.' in
compatible strings with '_' when generating identifiers.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Several problems with memset usage in the LwM2M subsystem were
identified:
- Every single object that can have multiple instances is using
memset to initialize static resource data during init. This data
will already be set to 0 because it is static, so the memset
statements are unneeded.
- Instead of using memset during object init which is only called
one time during kernel startup, let's add a memset to the
object create function to ensure the resource data is cleared out.
It could have been used prior and then released via a DELETE op.
- the IPSO Timer object was setting a lot of data structure members
to 0 in the create function. Let's do 1 memset on the entire
structure and then only the non-zero values afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
When presenting errors in lwm2m_engine_set() let's include the related
LwM2M path for easier debugging.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's add support for recently added LwM2M objects:
- Connectitiy Monitoring
- Location
- IPSO Accelerometer
- IPSO Buzzer
- IPSO On/Off Switch
- IPSO Push Button
Currently, this is limited to compile enabled and manual creation
of objects via LwM2M server. Objects will respond to read/write
operations, but not have real HW backing.
Signed-off-by: Michael Scott <mike@foundries.io>
This core LwM2M Object enables monitoring of parameters related to
network connectivity.
This is only the basic object structure. More work will be needed
to set the various resources based on connectivity.
Signed-off-by: Michael Scott <mike@foundries.io>
This Object is used to report the state of a momentary action push
button control and to count the number of times the control has
been operated since the last observation.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M allows for multiple instance resources such the power source
resources in the device object. These types of resources have
always been very hard to work with, and frankly were poorly
implemented.
This led to other issues where it was very hard to have
non-sequential resource instances, and each resource of this type
needed special getter / setter methods such as:
lwm2m_device_add_pwrsrc()
lwm2m_device_set_pwrsrc_voltage_mv()
Going forward, as more LwM2M objects are implemented this just
doesn't scale well.
To fix this:
- split the resource instance data out from the resource data.
This includes the data pointer information and resource
instance id.
- add resource id and resource instance id to the event callback
functions so user's can see in more detail what resources and
resource instances are being handled.
- allow generic functions like lwm2m_engine_get_*() and
lwm2m_engine_set_*() to access resource instance data.
- adjust object resource initialization macros to map resource
instances to resources at the time of object instance
creation.
- fix up the lwm2m_client as a reflection of all of these changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Due to work combining data into the lwm2m_message structure, we no
longer need to pass the lwm2m_engine_obj parameter between
formatters and most of the operation handlers.
So, let's remove it.
Signed-off-by: Michael Scott <mike@foundries.io>
The multi_max_count is no longer used and can be removed from the
obj_field structure if we change all of the OBJ_FIELD() macros to
use OBJ_FIELD_DATA() instead.
Technically, OBJ_FIELD() and OBJ_FIELD_DATA() are now the same, but
we're keeping them both for the time being. In the future, more
fields may be added to the obj_field structure and we can use the
OBJ_FIELD() macro again if that's the case.
Signed-off-by: Michael Scott <mike@foundries.io>
- Several of the functions use "path" as the parameter name for the
string-based LwM2M path. Let's clarify by using "pathstr".
- Recent updates to the LwM2M engine now support resource instances
when parsing the LwM2M path. Let's update descriptions accordingly.
Signed-off-by: Michael Scott <mike@foundries.io>
By sending the temp value back to the LwM2M engine, it allows all of
the min/max values to be updated over time.
Fixes an issue where min/max values were not being updated.
Signed-off-by: Michael Scott <mike@foundries.io>
The native Zephyr LwM2M client enables the JSON formatter which
can use more of the packet buffers than the default 256 with
TLV formatting. Let's set the default to 512 in order to avoid
cutting off the output of larger READ operations.
In the future, we should establish block transfer buffers to
handler longer READ ops.
Signed-off-by: Michael Scott <mike@foundries.io>
Per IPSO Light Control definition from the OMA LwM2M registry:
http://www.openmobilealliance.org/tech/profiles/lwm2m/3311.xml
There is an optional "Application Type" string resource (5750) in the
Light Control object. This was missed in the initial implementation.
NOTE: sample will assign reference if needed.
Signed-off-by: Michael Scott <mike@foundries.io>
We are pre-allocating a storage variable for the application type
resource in the IPSO Timer object. This is an optional resource
which won't always be set by samples.
Let's leave out the pre-allocated variable and let the sample set
this reference if needed (it's optional).
Signed-off-by: Michael Scott <mike@foundries.io>
Server records contain the default PMIN and PMAX settings for how
often we can send observe notifications. We are currently using
arbitrary defaults which cannot be changed when compiled or
during runtime.
Let's add Kconfig settings for the default settings to use and
also lookup the current values in the active server record when
an observe is added.
The actual PMIN/PMAX values can still be set via WRITE_ATTRIBUTE
operation.
Signed-off-by: Michael Scott <mike@foundries.io>
Adapted from similar code in the x86_64 port.
Useful when debugging boot problems on actual x86
hardware if a JTAG isn't handy or feasible.
Turn this on for qemu_x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* when fpu is configured or mpy_option > 6,
accl regs (r58, r59) will be configured,
they are used by fpu and mac, and are caller
-saved scratch regs, so need to be saved before
jumping to interrupt handlers
* r25 and r30 are also caller-saved scratch reg.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
for arc, floating point support cannot be enabled
automatically, so k_float_enable is requred.
z_arch_float_enable is for k_float_enable
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Write all the desired values in the debug control flag.
Initally we were oring it, but this variable does not have
the expected initial values as it also depends on fuse
programming settings, therefore we dont have console.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are not declared in dts/bindings/arm/nxp,kinetis-sim.yaml and do
not generate any output.
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A minor spelling fix in an inline comment in
both nRF9160 Secure and Non-Secure .dtsi headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changes to MEC1501 HAL for eSPI changed loop constant used by SoC
code initializing the ECIA registers. Fixed by using HAL constants
that are invariant.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This commit fixes following issues in printf formatting used by flash
drivers:
- cast values of type off_t to long to remove warnings generated when
compiling with Newlib.
- use 'z' modifier (as in "%zu") to print values of type size_t
- prefix all hex numbers with '0x'
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Allow the user to use software slave select instead of the
hardware pin, in order to free the related GPIO and avoid
unwanted SS triggering on the hardware pin. The default SS
is still the hardware pin.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The sdhc_cmd_r1_raw() function doesn't take into account the existence
of commands with data response. Because of this, some datas were being
lost.
The commands that return a r1 response and a data are: SDHC_SEND_CSD,
SDHC_SEND_CID, SDHC_READ_SINGLE_BLOCK, SDHC_READ_MULTIPLE_BLOCK,
SDHC_WRITE_BLOCK, SDHC_WRITE_MULTIPLE_BLOCK.
In order to solve this, was juts necessary skip the byte discard when
the command is one of these.
This problem was affecting, for example, the sdhc initialization. The
token returned from SDHC_SEND_CSD was being lost and the initialization
was broken.
Fixes#15444.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fixes#16739. Changed the STM32's SPI MISO/MOSI configurations in order
to reduce the power consumption by approximately 20uA per pin.
According to STM32's Application Notes on GPIO configuration for
low-power consumption, the input pins should be configured with internal
pull-up or pull-down resistor. If a pin is configured as a floating
input, and there is no signal present, the Schmitt trigger randomly
toggles between the logical levels induced by the external noise, thus
increasing the consumption.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Apparently, settings were relying on other headers
including kernel.h, once that include got removed from the
logger header samples fail to compile.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleaning up log.h include dependencies to allow log.h including in base
headers (e.g. kernel.h).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the logic in a corner case, when the target comparator value is
one cycle ahead of the counter value.
Experiments have shown, that `set_comparator(cyc + 1);` might be not
enough in that case, and we still may (rarely) miss the interrupt.
This could happen when the counter incremented its value after the `dt`
variable was set. As we should set the comparator value two cycles
ahead to be on the safe side, increment the target comparator value
by 2 instead of 1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `next_timeout()` function used to call the `elapsed()` function
directly in the `MAX` macro call. This caused the `elapsed()` function
to be executed twice, with possible different results, if the system
clock incremented its value in a meantime.
As a result, the whole `MAX(0, to->dticks - elapsed()` expresion could
return an incorrect value of -1, which represents the K_FOREVER timeout.
This led to a stall in devices running tickless kernel (as observed on
nRF52840).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These are not declared in any binding and do not generate any output.
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we are doing a nightly build we can utilize a large (over 50G) of
disk space just to generate the list of tests to build. We need to
optimize this so as we finish building the initial pass we clean up
as we go and only keep around the files we need (like .config,
generated_dts_board.conf, CMakeCache.txt, etc).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the following dtc warning:
mimxrt1064_evk.dts.pre.tmp:78.31-85.5: Warning (spi_bus_bridge):
/soc/flexspi1@402a4000: node name for SPI buses should be 'spi'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several aliases were added to nrf9160[ns].dtsi files solely for
the purpose of getting base addresses of certain hardware modules
via DT_ macros generated for these aliases.
Since for one-instance modules the same can be now achieved with
standard DT_INST_0_* macros, there is no need to keep these aliases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that strcspn() is implemented in our minimal libc, remove it from
the civetweb sample to avoid the linker complaining about multiple
definitions.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
pinmux: Add the relevant definition of the spi3 pin
dts: Fix a bug, spi3 does not have a label
soc: Supplement spi3 related definition
Signed-off-by: Findlay Feng <i@fengch.me>
Z_MPOOL_LVLS() expands into the sum of 16 _MPOOL_HAVE_LVL() instances,
and _MPOOL_BITS_SIZE() expands into the sum of 16 Z_MPOOL_LVLS()
instances. In the end, a single _MPOOL_BITS_SIZE() expands to 256
_MPOOL_HAVE_LVL() instances!
Let's make it slightly easier on the compiler, and easier for humans
too, by reworking Z_MPOOL_HAVE_LVL(() so that ic can be used directly
into Z_MPOOL_LBIT_BYTES(), making the code logic much simpler.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
ARC nSIM simulates pretty much any modern ARC core,
moreover it emulates a lot of different core features so
it is possible to play with them even wo real hardware.
Thus we add yet another ARC core family to be used on simulated
nSIM board.
For now it's just a basic configuration with ARC UART for
smoke-testing of Zephyr on ARC HS CPUs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This will give us a possibility to check unaligned read/write support
in simulation.
Note nSIM with S(ecure)EM (with secure option) doesn't support that
mode in HW.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
ARCv2 cores may access data not aligned by the data size boundary.
I.e. read entire 32-bit word from address 0x1.
This feature is configurable for ARC EM cores excluding those with
secure shield 2+2 mode. When it's available in hardware it's required
to enable that feature in run-time as well setting status32.AD bit.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
KFLAG instruction might affect multiple flags in STATUS32 register
and so when we need just AE-bit to be reset we need first read current
state of STATUS32, then change our bit and set STATUS32 again.
Otherwise critical flags including stack checking, unaligned access etc
will be dropped for good.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Up until now only ARC EM family has been supported in Zephyr
which don't support atomic operations other than
compare-and-excange, so custom atomic ops with load-locked(LLOCK)/
store-conditional(SCOND) were never used that's how we never
realised CONFIG_ATOMIC_OPERATIONS_CUSTOM points to the wrong file:
"atomic.c" while real implementation is in "atomic.S".
Fix that now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
These functions are useful for determining prefixes, as with file system
paths. They are required by littlefs.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for virtual UART device that uses Segger RTT channels
for data transfers. Due to the RTT principle, this driver supports
only polling API.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
k_cycle_get_32() returns an unsigned 32-bit integer, while the '%d'
specifier denotes a signed integer.
Using the proper C99 format specifier resolves the problem.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Logging module requires strings to be duplicated using log_strdup.
Enabling CONFIG_BT_DEBUG_KEYS caused runtime assertions in the logging
module.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Musca B1 has 2 x 2MB embedded flash memories (eFlash). The flash
memories are connected to the AHB Master Expansion “Code Interface”.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Core 5.1, Vol 3, Part F, 3.3.1
"Multi-octet fields within the GATT profile shall be sent least
significant octet first (little-endian) with the exception of the
Characteristic Value field. The Characteristic Value and any fields
within it shall be little-endian unless otherwise defined in the
specification which defines the characteristic."
Fixes: GATT/SR/GAS/BV-02-C
Fixes: #17857
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a hidden Kconfig option indicating that a given SoC is equipped
with the IEEE 802.15.4 capable radio so that the corresponding driver
configuration can depend on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The call to bt_conn_security will send a SMP security request for
peripheral, and for central it will initiate LL encryption.
A call to bt_conn_security with no IO capabilities but authenticated
keys has been distributed, would succeed on central side, but fail on
peripheral side with error code -22.
The keys could have been either:
- Preprogrammed
- IO capabilities may have changed.
- OOB bonding may been used.
Fix so that Peripheral can send a security request if the bond
information is already established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This property is only declared in bindings/spi/nordic,nrf-spis.yaml ('s'
for 'slave'), not in bindings/spi/nordic,nrf-spi.yaml.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The content of subsys/fb/cfb_fonts cannot be replicated by the existing
script due to lack of positioning options and use of a full-color frame
buffer, which affects the generated bitmap. Switch to the solution used
in the original script, add the required options, and document the
process of regenerating the fonts.
This commit also determines the required bounding box for the glyphs to
be sure that the user-provided value is sufficient to avoid partial
characters. Ideally the calculated width and height would be used for
font characters, but this would require significant restructuring of the
script to make calculated values available at the point where the
arguments are used to produce output.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The output of this script is intended to be put into an implementation
file, where the font data is accessed by index to an array maintained by
the linker script. There is no need for protection against multiple
includes, and the font data array should not be a global symbol.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The specified order of fields wastes space when the cfb_font_caps enum
isn't packed. Reorder to avoid this behavior.
Also remove the unnecessary array size on the extern symbol declaration,
lest the compiler misinterpret the properties as being zero-length
arrays rather than pointers. (The idiom is already technically
using undefined behavior since we're relying on the linker rather than
the language to produce an array from the individual declarations.)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The original creates a pointer to a compiler-generated temporary that is
destroyed when the scope is exited. The pointer is stored in a structure
defined in an enclosing scope and is invalid by the point it's used.
The fix holds the structure in a variable with the same lifetime as
the pointer.
Signed-off-by: Findlay Feng <i@fengch.me>
The method for getting a memory usage report printed during build, is
based on a GNU linker (ld) option flag, and thus is not necessarily
supported by other toolchain binary tools.
The introduced cmake macro allows for a given toolchain to specify how
the memory usage report is to be generated, and whether the command for
generation, if any, is to be added to the post_build_commands and the
post_build_byproducts lists of the top level CMakeLists.txt
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This forms the foundation for the abstraction of the binary tools,
where the following steps are taken:
- Move binary tool resolving, such as objcopy, objdump, readelf and
so forth, out of compiler definitions and place in a dedicated binary
tools folder with the binary tools supplier as subfolder, similar to
the compiler and linker directories.
- Create binary tool sets, gnu, host-gnu and llvm.
- Each toolchain selects the required set of binary tools by setting
BINTOOLS via its generic.cmake as it also does for compiler and linker.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
struct tm has fields that were not being set by the implementation,
causing the test to fail when the uninitialized values were compared
with a static initialized result. Zero the structure before filling it.
Closes#17794
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
It looks like, at some point in the past, initializing thread stacks
was the responsibility of the arch layer. After that was centralized,
we forgot to remove the related conditional header inclusion. Fixed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We generated a define for each instance to convey its existance of the
form:
#define DT_<COMPAT>_<INSTANCE> 1
However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>. To make things consistent we now generate a
define of the form:
#define DT_INST_<INSTANCE>_<COMPAT> 1
We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.
Fixes: #17650
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Explain what it means to enable nodes (and for a node to be disabled)
with some sample code from the .dts(i) files
- Explain the '&foo { ... }' syntax
- Linkify files with :zephyr_path:
- Simplify and shorten wording a bit
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* use IRQ_ACT to check nest interrupt
* implement an asm macro for nest interrupt check
* no need to use exc_nest_count, remove it
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* do not use a specific variable (saved_r0/saved_sp) to free r0
/exchange sp, but use stack to do that.
* it will make code scalable, e.g. for SMP, no need to define
variables for each core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* as ilink has a copy in ERET, it can be reused as a gp
* use ilink to do the job of arc_exc_saved_sp to save 4 bytes
and save some cycles because no load/store of memory
* it will make code scalable, e.g. for SMP, no need to
define variables for each core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit is a hotfix. It makes sanitycheck happy by fixing
the way we can temporarily exclude some tests in the userspace
test suite for the ARC architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add some information that would've saved me a lot of time:
- Give an overview of how device tree nodes and bindings fit together,
with examples. Assume people might be coming at it without knowing
anything about device tree.
- Explain how 'inherits' works in more detail
- Explain what 'parent/child: bus: ...' does more concretely, and what
problem it solves
- Add more examples to show what things look like in the .dts file
- Clean up the language a bit and make things more consistent
Also fix some errors, like 'properties: compatible: ...' being wrong
(missing 'constraint:' and compatible strings in the wrong place).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix the pipeline prepare or resume dequeue loop from
overflow. Fixes premature exit of dequeue of done FIFO
which caused the pipeline to overflow due to previously
placed done is not dequeued correctly and next event not
being put back into the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Because NXP MPU's regions are dynamically enabled/disabled, USB
device's access maybe restricted when switching out of a task.
Background DMA transfers to/from RAM may happen during MPU region
reconfiguration or core idling.
Enabled USB (Kinetis MPU Master 4) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Currently the retransmit_work is not cancelled when closing a context,
making it operate on an invalid context.
LwM2M RD client also closes the context and initializes it again when
registration with the server fails, overwriting the active timeout and
breaking the timeout dlist.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
This toolchain is no londer supported or needed. It was used to build
configurations that are now being removed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new DTS/binding parser to scripts/dts/ for generating
generated_dts_board.conf and generated_dts_board_unfixed.h.
The old code is kept to generate some deprecated defines, using the
--deprecated-only flag. It will be removed later.
The new parser is implemented in three files in scripts/dts/:
dtlib.py:
A low-level .dts parsing library. This is similar to devicetree.py in
the old code, but is a general robust DTS parser that doesn't rely on
preprocessing.
edtlib.py (e for extended):
A library built on top of dtlib.py that brings together data from DTS
files and bindings and creates Device instances with all the data for
a device.
gen_defines.py:
A script that uses edtlib.py to generate generated_dts_board.conf and
generated_dts_board_unfixed.h. Corresponds to extract_dts_includes.py
and the files in extract/ in the old code.
testdtlib.py:
Test suite for dtlib.py. Can be run directly as a script.
testedtlib.py (uses test.dts and test-bindings/):
Test suite for edtlib.py. Can be run directly as a script.
The test suites will be run automatically in CI.
The new code turns some things that were warnings (or not checked) in
the old code into errors, like missing properties that are specified
with 'category: required' in the binding for the node.
The code includes lots of documentation and tries to give helpful error
messages instead of Python errors.
Co-authored-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
--deprecate-only sounded like a command to "only deprecate (something)"
to me at first. --deprecated-only might make it clearer that it's about
only generating deprecated stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
User mode is only allowed to induce oopses and stack check
failures via software-triggered system fatal exceptions. This
commit forces a kernel oops if any other fatal exception reason
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
User mode should be able to successfully induce a kernel
oops, or stack check fail fatal error. The latter is
required by compiler stack canaries.
User mode should not be able to induce a kernel panic, or
fake some other kind of exception.
Currently supported on ARM and x86 platforms.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The macro, toolchain_cc_produce_debug_info, adds the compiler specific
flag for enabling the production of debugging information in the
toolchain native format.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Up to now, the only SOC that was supported in the STM32L496 series was
STM32L496XG with flash of 1MB. With the recent support of STM32L496XE,
this implementation is not correct. This patch adds support for the
other SOCs that come with flashes of 512KB and 256KB.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Make use of the new flag introduced in nrfx v1.7.2 that suspends
transfers, in order to properly handle scattered I2C transactions,
especially to perform i2c_burst_write() in the way expected by
display drivers, i.e. as a continuous transaction on the bus,
without the repeated START between its two parts.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This introduces a new flag (BT_GATT_SUBSCRIBE_WRITE_PENDING) which is
set when a write operation requires canceling before the parameters can
be reused.
Fixes#17534
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a dummy cancel request which is used instead of NULL when
clearing and outstanding request thus prevent new request to take
place before a response is received while allowing the original request
to be reused.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mcumgr is missing dependency on net_buf, which is used for SMP protocol
implementation. This causes build failure in case when only SMP over
shell is selected (CONFIG_MCUMGR_SMP_SHELL=y).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
flash_img subsystem writes data to flash only when the amount of data to
be written is larger than available buffer space. This commit modifies
this behavior to write data to flash as soon as the buffer is full.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
base64_decode requires 'size_t *olen', but '*int' was passed
instead. This caused a -Wincompatible-pointer-types "note: expected
'size_t *' {aka 'long unsigned int *'} but argument is of type 'int *'"
warning in qemu_x86 build. Fix that by using correct variable type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit enables the CAN shell for the sample code.
Also, the device shell is activated to find the proper device-name.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Implement a CAN shell. With this shell you can send messages,
attach and tetach filters.
Messages that match the attached filters are printed to the shell.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
As we now have PPP support, use more generic "serial-net" string instead
of "slip" when setting what kind of networking the board supports.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must discard the received Discard-Request silently.
See RFC 1661 chapter 5.9 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only net-shell calls net_ppp_ping() command, so make
it return the amount of time that it took to receive Echo-Reply
so the net-shell can print the round trip time value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface is point-to-point one which does
not need IP address etc, then no need to start DAD etc for
those interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a protocol that we do not currently handle, then
return Protocol-Reject to peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default PPP is started immediately when the network interface
goes up. This can be problematic especially when debugging the beast
so allow user to delay the startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These additional configs should have been put in prj.conf
and not here. Makes the tests simpler to build correctly
outside of sanitycheck.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
HSEM_CR_COREID_CURRENT was used as process number parameter in
LL_HSEM_ReleaseLock function. While this is working, this
define should not be used in this context.
Also, process number parameter is actually proposed in case of HSEM
use in inter-process context but is not required for inter-core
resource lock. Replace HSEM_CR_COREID_CURRENT with 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This will list all mount points in response to opendir("/").
This isn't perfect; mount points in subdirectories will show up as
their full path in this listing. But it's better than just returning
-EINVAL.
Signed-off-by: Jim Paris <jim@jtan.com>
In order for CMake and Python to interact correctly when the former
invokes the latter, ensure that Python uses UTF-8 encodings when
interacting with stdout and stdin on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The documentation that describes how Python and pip interact with the OS
when installing packages used to be under a common section, and was
moved to the west bootstrap one later on. Since this information is
required early on (for example on Linux when installing CMake via pip3),
move the info to its own section and link to it from others.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the version numbers from the distribution listings, since those
get outdated quickly and on top of that they are causing confusion due
to those being now too old to contain recent versions of CMake and DTC.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Any fatal error will print "ZEPHYR FATAL ERROR" now, so
we don't have to maintain a set of strings in the
sanitycheck harness.py
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We had a function that did this, but it was dead code.
Move to fatal.c and call from z_arm_fatal_error().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We introduce a new z_fatal_print() API and replace all
occurrences of exception handling code to use it.
This routes messages to the logging subsystem if enabled.
Otherwise, messages are sent to printk().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are standardizing to a arch-independent set of exception
reason codes, don't overload it with internal state of
the ARM fault handling code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
By the latest convention, libc's define struct timespec in
sys/_timespec.h. This is consistent with Newlib and ensures
about errors due to redefinitions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per POSIX, open() is defined in <fcntl.h>. fcntl.h in turn comes from
the underlying libc, either newlib, or minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
That's the header which is supposed to define them, there was even
FIXME on that in mqueue.h.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unfortunately, Zephyr SDK 0.10.0 ships with outdated Newlib 2.0.0
(from 2015 or earlier) which lacks sys/_timespec.h header, requiring
ugly workaround of defining struct timespec inline (the whole idea
was to standardize on sys/_timespec.h header for different libc's).
This is similar to earlier workaround for struct timeval definition
introduced in a6aee9b4c8. Zephyr SDK ticket for this issue
is https://github.com/zephyrproject-rtos/sdk-ng/issues/64, and it
will ve possible to remove both workarounds when Xtensa toolchain
will be upgraded to newlib version consistent with other
architectures.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
POSIX subsys defines struct timespec in <time.h> (as POSIX public
API requires), but newlib defines in in sys/_timespec.h, which
inevitably leads to inclusion order and redifinition conflicts.
Follow newlib way and define it in single place, sys/_timespec.h,
which belongs to libc namespace. Thus, we move current definition
to minimal libc, and will use either minlibc's or newlib's
definition, instead of trying to redefine it.
This is similar to the introduction of sys/_timeval.h done earlier.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Newlib libc already provides sys/stat.h, so trying to have sys/stat.h
on the level of POSIX subsys inevitable leads to include order and
definition conflicts. Instead (as most of other sys/* includes)
should come from the underlying libc.
While moving, made unrelated change of removing #include <kernel.h>,
to accommodate the change reviewers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Expose eSPI block with interrupts enabled for channel 0 & 1
eSPI handshake has been tested using espi driver sample app
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Show eSPI API driver usage, including early configuration,
send of virtual wire packets and callback mechanism
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Add eSPI Microchip XEC driver
Include support for peripheral & virtual wires (channel 0-1)
OOB and flash support can be added in the future
Fix compilation error in pinmux driver
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Correct HAL macros related to eSPI block
Add GIRQ bit definitions for VWires and some peripherals
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This API defines following call for eSPI bus drivers
- espi_set_config
- espi_get_channel_status
- espi_send_read_request
- espi_send_write_request
- espi_send_vwire
- espi_receive_vwire
- espi_send_oob
- espi_receive_oob
- espi_flash_read
- espi_flash_write
- espi_flash_erase
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
stm32f429.dtsi wrongly introduced i2s nodes 4, 5 and 6.
Remove them as actually only i2s nodes 2 and 3 are supported on
these socs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Sometimes i2c operation does not return in a while loop.
Fix this by adding timeout to the i2c driver.
Fixes: #12261
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
The SoC clock init code for USB was using a deprecated DTS define.
Switch to using the non-deprecated form.
Fixes: #17772
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These files should be kept aligned with their templates, so that it is
easy to tell what adjustments are needed to integrate nrfx into Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There had been some changes applied on the API after that documentation
was made. Reflect the API behavior change and correct a minor issue.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The testcases are adapted to handle more than one net buffer in
a net_pkt. After the IPHC optimization it is possible that IP header
is not in the same buffer than the UDP header.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This patch tries to avoid memmoves and buffer allocations when there
is enough space in the original buffer. Headers are still contiguous
but not in the same buffer.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is a rework of the 6lo IPHC uncompression.
The uncompression now tries to work in place on the original buffer
instead of allocation a new one. If there is not enough tail-room,
a new buffer is allocated and filled with the IP and maybe UDP header.
The compressed header is pulled from the original buffer and the
buffer is preserved.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
When net_pkt_skip skips the entire data in a net buffer, the cursor
still points to this buffer on data that is off by one.
Calling pkt_cursor_advance in net_pkt_is_contiguous fixes this and
moves the cursor to the next buffer.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is a rework of the 6lo IPHC. The compression now works inline
on the original buffer instead of allocation a new one.
Additionally DAM_11 (Destination address fully elided) has precedence
over DAM_10 (16 bit compressible) now.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The `start_udp_and_tcp` funcion is a blocking function, therefore it
should not be called from the system workqueue, as it would stall it.
Because it was called in such a way, the retry mechanism, which
also relied on the system workqueue did not work properly.
This commit fixes the issue, by keeping the main application processing
in the main thread, and using a semaphore to synchronize with the
connection manager.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move CMake ExternalProject integration of OpenThread to the
CMakeLists.txt file within the OpenThread fork.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
zero slice_ticks when can't time slice so that next_timeout will
ignore slice_ticks of _current_cpu and system can stay low power
state longer time.
Fixes: #17368.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
For systems with userspace, the sys_sem exist in user memory working
as counter semaphore for user mode thread. The implemention of sys_sem
is based on k_futex. And the majority of the synchronization operations
are performed in user mode to reduce the calling of system call.
And for systems without userspace enabled, sys_sem behaves like k_sem.
Fixes: #15139.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
sw_isr_table has two entries, an argument and an ISR function. The
comment on struct _isr_table_entry in include/sw_isr_table.h says that
"This allows a table entry to be loaded [...] with one ldmia
instruction, on ARM [...]". Some arch, e.g. SPARC, also has a double
word load instruction, "ldd", but the instruct must have address align
to double word or 8 bytes.
This commit makes the table alignment configurable. It allows each
architecture to specify it, if needed. The default value is 0 for no
alignment.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
We don't generate any CONFIG_ prefixed symbols from dts files so we
don't need to try and import them in anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The previous code limited the length of a write to the size of a page,
but did not check whether the starting position was far enough into the
page that the write would still cross a page boundary.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This was always intended to be a bytestring rather than an array, but
full support was missing. Since that has been addressed switch it to
the preferred format.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The test assumes that the settings area is empty. This happens
naturally when the area is in the SOC flash and the chip flash is
entirely erased when the test is programmed. The test will fail if the
programmed board is reset and the test run again.
The test cannot pass by reprogramming when the storage area is in an
external flash device.
Make things repeatable for FCB by erasing the storage partition before
running the test.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If the flash device is not configured, return an error rather than
dereferencing a null device pointer.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Particle mesh feather devices, and Nordic PCA10056, can both run
this example with the on-board JEDEC SPI NOR device if the driver
is enabled.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There are multiple flash implementations. This sample was originally
written for the W25QXXDV driver, but has since been used for
jedec,spi-nor. The sample should work with multiple drivers.
Add device name sources for several drivers, falling back to spi-nor
which was recently used as a test filter.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Particle released documentation with a pre-release flash chip. Correct
the name to the actual as-sold device, and add the corresponding size
property as well as the has-be32k property. Also add an alias so we
can set partitions externally.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The driver historically used the erase block size (64 KiBy) as the page
size. There are other viable "sector" sizes, and for some applications
this one may be too large. Allow the application to specify the desired
flash page size.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The JEDEC API defines the hardware page, sector, and block sizes.
Deprecate the Kconfig settings, remove the `erase-size-block` property,
and add `has-be32k` to indicate that 32K-byte erase is supported.
Rework the driver to use the constants instead of configured values.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit adds the kernel.h include in order to provide
sys_clock_hw_cycles_per_sec() declaration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The adc_stm32 driver used system timer frequency as a base for
busy-wait delay calculation. This commit corrects that by obtaining
the needed value from SystemCoreClock variable.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The wdog_cmsdk_apb driver used system clock frequency
as a base for timeout calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_cc13xx_cc26xx driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_stellaris driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_qmsi driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_msp432p4xx driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_cc32xx driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_pl011 driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_cmsdk_apb driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The spi_dw driver used system clock frequency
as a base for SPI bus frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The log_backend_swo used system clock frequency
as a base for SWO clock calculation. This commit
corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The clock control initialization code used system clock
frequency as a CPU clock frequency. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used timer clock frequency
as a system clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The i2c_cc32xx driver used system clock frequency
as a base for I2C clock frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Please note, that for I2C devices the clock-frequency property
specifies SCK frequency, instead of frequency of the clock driving
peripheral. To solve that problem, a new property was added.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call to
inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This new flag will indicate that the kernel object represents
an instance of a device driver object.
Fixes: #14037
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make sure that SO_TXTIME socket option can be set and get.
Verify also that TX time is passed properly to network device
driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add BSD socket sendmsg() API that can be used to send data to peer
and also pass ancillary data to lower level of the network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are needed in sendmsg implementation. See RFC 3542 for
details of the msghdr struct and the macros that are used
to manipulate it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User could have set something to optval in getsockopt() and we
need to copy the data to kernel optval so that the socket family
code can use the value for something.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the allocated net_pkt is larger than the network interface MTU,
then check if the IPv6 fragmentation is enabled and allow larger
net_pkt length as the IPv6 fragmentation will split the packet into
suitable parts.
Fixes#16354
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_pkt_pull() needs to move all the remaining data in the
net_buf instead of just the pull amount.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Existing test checking value returned by k_delayed_work_remaining_get()
verified two cases:
1) The k_delayed_work_remaining_get() should return 0 for non-submitted
work.
2) The k_delayed_work_remaining_get() should return value greater or
equal to the timeout value of just submitted work.
Unfortunately, the second check is not correct. The value returned
by the k_delayed_work_remaining_get() just after submitting delayed
work should be:
- Equal to timeout of the submitted work if no timer interrupt was
executed between submitting work and checking remaining time.
OR
- Less than timeout of the submitted work if a timer interrupt was
executed between submitting work and checking remaining time.
This commit changes the test accordingly taking under account the
error caused by back and forth conversion between ms and ticks.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Set advertisers state flags so that previous advertise params does not
affect the current advertiser state.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
So far we supported normal (10 bit) and low-power (8 bit) modes. Add
support for high-resolution mode as a third option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Liteeth exposes two memory regions:
* set of rx/tx buffers (aka slots) to exchange packets,
* control and status registers.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Same deal as in commit eba81c6e54 ("yaml: Remove redundant document
separators"), for some newly added stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The uart node in the native_posix dts has a reg property, but there are
no registers associated with the uart. So remove the property and
remove the unit address associated with the reg (now that its removed).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch reorders designated initializers to satisfy C++ requiring
that designated initializers appear in the same order as the members
they initialize.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This patch adds `extern "C"` linkage directives so the header files can
be included by C++ source files.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Clarify a little bit how to fetch and compile Babblesim.
So users will not need to have repo installed,
and to guide them to add the variables to their shell init
script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patch introduces a dedicated work queue for handling the events
from ISR (i.e. for notifying the USB device stack, for executing the
enpoints callbacks, etc.). The system work queue cannot be used for
this purpose as it might be used in applications for scheduling USB
transfers and this could lead to a deadlock when the USB device stack
would not be notified about certain event because of a system work
queue item waiting for a USB transfer to be finished.
The FIFO named so far `work_queue` is renamed to `usbd_evt_fifo`
to better indicate its purpose and to avoid confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
After the removal of the virtualcom DT node in 5071eee, using the chosen
node is no longer functional. Instead the Kconfig
CONFIG_UART_CONSOLE_ON_DEV_NAME is used to locate the correct UART.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
No binding has anything but 'version: 0.1', and the code in scripts/dts/
never does anything with it except print a warning if it isn't there.
It's undocumented what it means.
I suspect it's overkill if it's meant to be the binding format version.
If we'd need to tell different versions from each other, we could change
some other minor thing in the format, and it probably won't be needed.
Remove the 'version' fields from the bindings and the warning from the
scripts/dts/ scripts.
The new device tree script will give an error when unknown fields appear
in bindings.
The deletion was done with
git ls-files 'dts/bindings/*.yaml' | xargs sed -i '/^\s*version: /d'
Some blank lines at the beginning of bindings were removed as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Updated fs shell sample readme to state the requirement of a 32-bit
version of libfuse while building for native_posix board
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
File system API functions that operate on paths are passed both the
absolute path including the mount point prefix, and the mount point
within which the path lies.
Unfortunately it's not entirely trivial to convert an arbitrary path
within the file system space to an absolute path within its mount point,
because the path may be to the mount point itself and not end with a
directory separator. The effect is that a file system implementation
like nffs may be given an empty path when "/" is required.
Add an implementation module that does this transformation and use it to
transform paths within each filesystem wrapper.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Conditional compile the use of Rx Pool used to dispatch ULL
context generated messages towards LL thread context, which
is presently only used in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Commit 948ef47cf4 ("dts: riscv32: Add rv32m1 zero-riscy core") put
common ri5cy and zero_riscy DT parts in rv32m1.dtsi, with two separate
rv32m1_ri5cy.dtsi rv32m1_zero_riscy.dtsi files that #include it.
The two interrupt multiplexers are defined in the common rv32m1.dtsi
file, but rv32m1_ri5cy.dtsi rv32m1_zero_riscy.dtsi each only specify
'interrupts' for one of them. Since 'interrupts' is 'category: required'
in openisa,rv32m1-intmux.yaml, this leads to warnings (or errors with
the new DT parser).
Disable (status = "disabled") the two interrupt multiplexers in the
common rv32m1.dtsi file and enable them in the board-specific files to
fix it. Required props. are only checked for enabled nodes.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The property is required on all SPI clients, but was missing from
several devicetree nodes. Set it, using the capitalized version of the
node alias when present, with "jedec,spi-nor#0" as the fallback.
Closes#17662
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In most of the cases the fixed-clock node is not referenced by the
Zephyr code, making the label property just a burden.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Have the SoC dtsi files for microchip mark the devices (uart & i2c) as
disabled by default and let the board dts files enable which one's they
need/use (which is what's happening already).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
User mode isn't allowed to generate a panic and this would
lead to a confusing privilege violation exception.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The binding for arm,cmsdk-timer requires a label so add it into the dts
since its missing on v2m_musca_b1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The bindings for arm,cmsdk-{d}timer requires a label so add it into the
dts since its missing on mps2_an521.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated the documentation of display_blanking_on and
display_blanking_off to clarify its usage.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
I'm guessing STM32 GPIO nodes don't generate interrupts, because I can't
find any device tree nodes with 'compatible = "st,stm32-gpio"' and an
'interrupts' property.
Remove the required 'interrupts' property from the binding. This fixes a
bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The port_sel property had the category set to 'define' which isn't a
valid option. Change it to be 'required'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit makes the clock property optional (through base.yaml),
as clock reference is not used in the code.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit make the float_disable test suite more robust
for fast CPUs, by replacing k_sleep(1) with k_yield(), as
the mechanism to trigger thread swap-out during the test
execution. In the wake of using k_yield(), the test, now,
fixes the priorities of all testing threads to 0, making
the test behavior more deterministic with respect to
thread scheduling. The patch doesn't change the functional
behavior of the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix a race which seems to have been presenting itself
very sporadically on loaded systems.
The race seems to have caused tests/kernel/sched/schedule_api
to fail at random on native_posix.
The case is a bit convoluted:
When the kernel calls z_new_thread(), the POSIX arch saves
the new thread entry call in that new Zephyr thread stack
together with a bit of extra info for the POSIX arch.
And spawns a new pthread (posix_thread_starter()) which
will eventually (after the Zephyr kernel swapped to it),
call that entry function.
(Note that in principle a thread spawned by pthreads may
be arbitrarily delayed)
The POSIX arch does not try to synchronize to that new
pthread (because why should it) until the first time the
Zephyr kernel tries to swap to that thread.
But, the kernel may never try to swap to it.
And therefore that thread's posix_thread_starter() may never
have got to run before the thread was aborted, and its
Zephyr stack reused for something else by the Zephyr app.
As posix_thread_starter() was relaying on looking into that
thread stack, it may now be looking into another thread stack
or anything else.
So, this commit fixes it by having posix_thread_starter()
get the input it always needs not from the Zephyr stack,
but from its own pthread_create() parameter pointing to a
structure kept by the POSIX arch.
Note that if the thread was aborted before reaching that point
posix_thread_starter() will NOT call the Zephyr thread entry
function, but just cleanup.
With this change all "asynchronous" parts of the POSIX arch
should relay only on the POSIX arch own structures.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Activate the DTCM for STM32F7 board that have Ethernet.
This is needed because the Ethernet driver puts the DMA buffer
to this section.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
For STM32F7 MCU the actual implementation doesn't work when the
DMA buffers are placed in the SRAM.
This might be a problem with caches.
To overcome this problem, the buffer is moved to the DTCM.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Simple backends, like UART or RTT, implementation is very similar.
Header has functions which can be reused by simple backends and
remove redundant code.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some diagrams showing the different scheduling algorithms we
support.
The diagrams were made using draw.io and can be edit using draw.io.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When code relocation enabled, there will be serval regions holding
text. And then there will be function call between these .text
regions, when distance between caller and callee is too far, linker
will automatically generate and insert veneer functions. And these
veneer functions will be located right after the last instruction
in the .text region by the linker. So these code will be put in the
memory reserved for priv_stacks text and kobject text if they don't
consume all the reserved memory. Or the veneer functions will be put
before the reserved memory if there isn't code in the reserved
memory. And then in the user mode building process, there will be
different memory layout and it will cause usr mode not working.
And moving the memory reserved for priv_stacks text and kobject text
at the beginning of .text will avoid above problem. The detailed
analysis for this issue can be found on Github issue #17038.
Fixes: #17038.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Since the nxp,imx-gpio binding is shared between i.MX and i.MX-RT SoC
the 'rdc' property needs to be optional (as it doesn't make sense on the
RT SoCs).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to make sure that the build works in folders that require a UTF
encoding, make sure that both CMake and the various Python scripts that
interact with each other on files use the same encoding, in this case
UTF-8.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
main.c file changes
1. Renamed <board.h> to <device.h>
2. <misc/printk.h> now is inserted into <sys/printk.h>
3. <i2c.h> and <gpio.h> now are inserted into
<drivers/i2c.h> and <drivers/gpio.h>
4. Deleted <errno.h> because it is not using
5. Deleted <pwm.h> because it is not using
6. Deleted <display/mb_display.h> because it is not using
in that project (legacy from old project).
7. Now we use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS} ,
so renamed SW0_GPIO_CONTROLLER to DT_ALIAS_SW0_GPIOS_CONTROLLER
prj.conf file changes
1. Deleted CONFIG_SYS_CLOCK_TICKS_PER_SEC=250
because apps shouldn't set tick rate.
Made a line follower robot sample using DFRobot Maqueen chassis
for micro:bit board. Deleted unused files.
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
This enables support for GAP writable device name in tester application
for testing purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Because NXP MPU's regions are dynamically enabled/disabled, ENET
device's access maybe restricted when switching out of a task.
Background DMA transfers from RAM to MAC/PHY may happen during MPU
region reconfiguration or core idling.
Enabled ENET (Kinetis MPU Master 3) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
There doesn't seem to be any use of the virtualcom device in the code,
so lets remove it from the dts as it describes itself as a usb device
controller which it is not.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've removed the need for the 'generation:' property in the binding
files. Remove use in st,stm32-usb.yaml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of dts bindings mark 'interrupts' as a required property when
in fact they are not for those devices. Remove the 'required' setting
and just have 'interrupts' as 'optional'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The dts that have intel,qmsi-watchdog don't sent a clock property so its
not required. Change it from being required to optional.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This macro provides the required alignment directives to ensure that the
font definitions are placed properly for iteration as members of an
array object.
Closes#17581
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Sample applications for display functions do not work on native_posix_64
due to missing overrides. Clone the native_posix_64 Kconfig override
for all samples that have a native_posix Kconfig override.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash size calculation was don with assumption that flash page size
is always 1 KB and flash size was parameterized with such granularity.
This patch correct this bug.
Flash pages number under statistic can't be calculated via preprocessor
anymore - thus are parameterized via Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It Need to start using DT_FLASH_SIM_xxx labels after sim_flash was
un-chosen as zephyr,flash.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Qemu_x86 didn't reflect emulated program memory size.
It was because chosen zephyr,flash was assigned to flash_simulator
which was helping to generate DT_FLASH properties for sim_flash node.
This change revert choice of flash0 which solve problem with
program memory size. Flash simulator have to use
DT_SOC_NV_FLASH_xxx labels for fetch its property since that.
fixes#15832
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The desired memory map is to have the 0 - 4K page non-present
to catch NULL pointer dereferences,
from 4K - 4MB for the program text (RO, Execute),
ROM (RO, No Execute), and 4MB-8MB for system RAM.
This patch cut text size by 4 KB which allow to meet above
requirements.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit adds a fixed clock node (representing clock driving
system bus). The added node is then referenced by peripherals requiring
information about driving clock frequency.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit adds 'clock-frequency' property to the cpu nodes.
The clock frequency specified in the added property is used
during platform configuration. Examples:
- The SWO logger uses clock frequency to configure SWO output.
- Plenty of platforms need CPU clock specified for their HAL.
- Most of devices with USB needs information about CPU clock
in order to configure USB clock source.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Stack canaries require that the z_libc_partition be added to
the memory domain, otherwise user thread access to the
stack canary value will result in an MPU/MMU fault.
These tests define their own domains to test specific userspace
features. Adding another partition to them would be invasive,
would potentially break some platforms with a limited number
of MPU regions, and these tests are not designed to validate
stack canaries anyway, we have other tests for that.
Fixes: #17595
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Qemu is already updated past 2.9 release, so this
workaround for QEMU_CORTEX_M3 is now obsolete and
can be removed.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When TRUSTED_EXECUTION_NONSECUCRE is selected, we always
define the default board (mps2_an521). We do not need to
OR with TRUSTED_EXECUTION_SECURE, in this Kconfig
conditional.
In addition to that, we make the BOARD_MPS2_AN521 board
to strictly depend on the corresponding SOC, not on the
SOC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signify that the MPS2 AN521 is selected as a QEMU
target. Indicate, also, that this board has support
for COVERAGE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_ARCH_HAS_USERSPACE is automatically set for
Cortex-M targets with CONFIG_ARM_MPU being set. So
we can remove this from the default setup since it
is redundant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These bindings override the 'category: optional' for 'clocks' from
uart.yaml with 'category: required', but none of the nodes that use the
bindings set 'clocks'.
Maybe it's a copy-paste error. Remove the 'clock' overrides.
Fixes some errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These bindings !include adc.yaml, but their device tree nodes never set
'clocks':
dts/bindings/iio/adc/atmel,sam-afec.yaml
dts/bindings/iio/adc/atmel,sam0-adc.yaml
dts/bindings/iio/adc/nordic,nrf-adc.yaml
dts/bindings/iio/adc/nordic,nrf-saadc.yaml
The nodes for these bindings do set it (think it's consistent for
st,stm32-adc.yaml):
dts/bindings/iio/adc/nxp,kinetis-adc12.yaml
dts/bindings/iio/adc/st,stm32-adc.yaml
Make 'clocks' optional in adc.yaml. Maybe it should be changed to
required on some platforms (!including bindings can change 'optional' to
'required').
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch adds an `extern "C"` linkage directive so sntp.h can be
included by C++ source files.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Added a fix to handle L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Relates to #17046.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a bug related to missing reset of packet timing
restriction variable.
Fixes BT LL TS 5.1.0 test:
LL/CON/SLA/BV-55-C [Initiating PHY Update Procedure - Packet
Time Restrictions, LE Coded]
Related to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This verifies gmtime and timeutil_timegm against each other and
reference data for a wide range of instances.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a generic API to provide the inverse operation for gmtime and as a
home for future generic time-related functions that are not in POSIX.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Implement the conversion from UNIX time to broken-down civil time per
the gmtime() and gmtime_r() functions.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provide definitions for a subset of the standard time types that must be
provided by this file, in anticipation of supporting civil time in
Zephyr.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This reverts commit 755cc644cc.
This approach is problematic in several ways. First, `intptr_t` could
cause undefined behavior in the subtraction when the pointer converts to
a negative value. Except in weird cases where the sign of the pointer
identifies a memory domain (like kernel vs userspace) I'm unaware of any
valid use of `intptr_t`.
Second, this macro was created to address a special need that cannot
rely on defined behavior: i.e. to ensure that data definitions are
placed in contiguous space and access is provided through linker-defined
symbols, for which the language required alignment and continuity is not
guaranteed.
A macro that calculates the span between linker symbols has very
different semantics than one that calculates the difference between
pointers. Replace the global PTR_DIFF with a documented local macro
that tests what's necessary without risking integer overflow.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Before, attempting to induce a kernel oops would instead
lead to a general protection fault as the interrupt vector
was at DPL=0.
Now we allow by setting DPL=3. We restrict the allowable
reason codes to either stack overflows or kernel oops; we
don't want user mode to be able to create a kernel panic,
or fake some other kind of exception.
Fixes an issue where the stack canary test case was triggering
a GPF instead of a stack check exception on x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The mempool allocator implementation recursively breaks a memory block
into 4 sub-blocks until it minimally fits the requested memory size.
The size of each sub-blocks is rounded up to the next word boundary to
preserve word alignment on the returned memory, and this is a problem.
Let's consider max_sz = 2072 and n_max = 1. That's our level 0.
At level 1, we get one level-0 block split in 4 sub-blocks whose size
is WB_UP(2072 / 4) = 520. However 4 * 520 = 2080 so we must discard the
4th sub-block since it doesn't fit inside our 2072-byte parent block.
We're down to 3 * 520 = 1560 bytes of usable memory.
Our memory usage efficiency is now 1560 / 2072 = 75%.
At level 2, we get 3 level-1 blocks, and each of them may be split
in 4 sub-blocks whose size is WB_UP(520 / 4) = 132. But 4 * 132 = 528
so the 4th sub-block has to be discarded again.
We're down to 9 * 132 = 1188 bytes of usable memory.
Our memory usage efficiency is now 1188 / 2072 = 57%.
At level 3, we get 9 level-2 blocks, each split into WB_UP(132 / 4)
= 36 bytes. Again 4 * 36 = 144 so the 4th sub-block is discarded.
We're down to 27 * 36 = 972 bytes of usable memory.
Our memory usage efficiency is now 972 / 2072 = 47%.
What should be done instead, is to round _down_ sub-block sizes
not _up_. This way, sub-blocks still align to word boundaries, and
they always fit within their parent block as the total size may
no longer exceed the initial size.
Using the same max_sz = 2072 would yield a memory usage efficiency of
99% at level 3, so let's demo a worst case 2044 instead.
Level 1: 4 sub-blocks of WB_DN(2044 / 4) = 508 bytes.
We're down to 4 * 508 = 2032 bytes of usable memory.
Our memory usage efficiency is now 2032 / 2044 = 99%.
Level 2: 4 * 4 sub-blocks of WB_DN(508 / 4) = 124 bytes.
We're down to 16 * 124 = 1984 bytes of usable memory.
Our memory usage efficiency is now 1984 / 2044 = 97%.
Level 3: 16 * 4 sub-blocks of WB_DN(124 / 4) = 28 bytes.
We're down to 64 * 28 = 1792 bytes of usable memory.
Our memory usage efficiency is now 1792 / 2044 = 88%.
Conclusion: if max_sz is a power of 2 then we get 100% efficiency at
all levens in both cases. But if not, then the rounding-up method has
a far worse degradation curve than the rounding-down method, wasting
more than 50% of memory in some cases.
So let's round sub-block sizes down rather than up, and remove
block_fits() which purpose was to identify sub-blocks that didn't
fit within their parent block and is now useless.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Because the only difference between native_posix and native_posix_64
should be 32-bit vs 64-bit compilation, the NATIVE_POSIX menu option
is turned into NATIVE_POSIX_32 and the NATIVE_POSIX_64 is added, with
both selecting NATIVE_POSIX. This way nothing changes for the existing
native_posix target, allowing it to share almost everything with the
64-bit version.
Both flavors are made available for CI tests to pick them. This assumes
both 32-bit and 64-bit build environments are available.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We need to pass -m64 instead of -m32 when CONFIG_64BIT is set.
This is pretty x86 centric. Many platforms don't have the ability
to select between 32-bits or 64-bits builds and either of those should
be dropped in that case with restriction on the available configuration
done elsewhere. But for the time being this allows for testing both.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
My compiler is rather fussy:
zephyr/boards/posix/native_posix/irq_ctrl.c:133:7:
error: conflicting types for ‘hw_irq_ctrl_get_irq_status’
u64_t hw_irq_ctrl_get_irq_status(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from zephyr/boards/posix/native_posix/irq_ctrl.c:11:
zephyr/boards/posix/native_posix/irq_ctrl.h:29:10:
note: previous declaration of ‘hw_irq_ctrl_get_irq_status’ was here
uint64_t hw_irq_ctrl_get_irq_status(void);
^~~~~~~~~~~~~~~~~~~~~~~~~~
Make the definition match its declaration.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Since commit 39cd2ebef7 ("malloc: make sure returned memory is
properly aligned") the size of struct sys_mem_pool_block size is
rounded up to the next word boundary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The st,stm32-can binding specified several required properties that were
never set in actual .dts files and not used by the code. Remove them at
this time since they aren't being used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We removed support for cell_string some time ago, so we have some stale
references in a number of bindings that we can remove.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Note that these appear as
properties: {erase,write}-block-size: label: ...
rather than as
properties: label: ...
I can't see anything looking at 'label' for individual properties in
bindings, so it's probably dead code. Labels are fetched from the device
tree in extract/flash.py.
Piggyback removal of some 'generation: define's and a redundant pair of
YAML document separators.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the Fast Encryption design and connection RSSI
measurement when CONFIG_BT_HCI_RAW is selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
This fix with avoid states/roles from stepping on each
others event length. Connection would have supervision timed
out or have stalled data transmissions due to insufficient
reserved air time.
Relates to #15171.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added note on read alignment requirement in order to make
a user more conscious of restrictions.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The spi-nor flash nodes require a jedec-id property as per the binding.
We add the jedec-id's as best we can determine based on the data sheets
for the various flash modules on these boards.
However these id's should be validated by actually reading the value to
ensure they are correct.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We define "arc,num-irq-priority-bits" and "intel,num-irq-priority-bits"
as required properties in the bindings for the interrupt controllers
however we never specify these properties in any .dts files or use them
in any code.
Remove them as stale properties in the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit b4078c557d / zephyrproject-rtos/zephyr#17495
This revert is needed for two reasons:
1. As reported by Lawrence King at
https://lists.zephyrproject.org/g/users/message/1566
this breaks incremental builds with ninja:
cd sample/hello_world
west build -b qemu_x86
touch src/main.c
west build -b qemu_x86
hello_world/build/../src/main.c:11: multiple definition of main';
app/libapp.a(main.c.obj):samples/hello_world/build/../src/main.c:11:
first defined here
collect2: error: ld returned 1 exit status
ar tf build/app/libapp.a
main.c.obj
main.c.obj
This does NOT break incremental builds with GNU Make, not sure why not.
2. Less urgently, I finally got someone from the CMake team to help me
and point me at an alternative solution that doesn't rely on CMake
internals: https://gitlab.kitware.com/cmake/cmake/issues/19474
I was about to try it when Lawrence reported the regression above.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
We don't use the DT_FLASH_AREA_*_LABEL defines today so lets mark them
deprecated until we actually need something.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the implementation of initiator to use correct anchor
tick and remainder microseconds when sending out CONNECT_REQ
PDU and then to scheduling the first connection event. This
is a fix when initiator is in continuous scan.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt clear command accepts either 'all' or a bluetooth address.
If it is an LE address then type is also needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in the ported code of the connection update, when
the slave events are skipped due to other overlapping state
or role the connection update at the instant used wrong
latency calculations. This lead to connection disconnection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Submit GATT database hash as a delayed work to prevent it being run
twice if we register dynamic services.
Signed-off-by: François Delawarde <fnde@oticon.com>
The native_posix timer driver was still using the
legacy timer API.
Replace it with a new version, which is aligned with
the new kernel<->system timer driver API,
and which has TICKLESS_CAPABLE support
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
TWI and TWIM used single static variable for multiple instances.
It would cause problems in case of multiple instances of peripheral.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The space or plus prefix must appear when requested even with INF and
NAN. And no zero-padding in that case.
Also, 0.0 and -0.0 are distinct values. It is necessary to display
the minus sign with a negative zero.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The precision parameter to the %g conversion indicates the maximum
number of significant digits and not the number of digits to appear
after the radix character. Here's a few examples this patch fixes:
expected before
----------------------------------------------------------
printf("%.3g", 150.12) 150 150.12
printf("%.2g", 150.1) 1.5e+02 150.1
printf("%#.3g", 150.) 150. 150.000
printf("%#.2g", 15e-5) 0.00015 0.00
printf("%#.4g", 1505e-7) 0.0001505 0.0002
printf("%#.4g", 1505e-8) 1.505e-05 1.5050e-05
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The code accounts only for 2 exponent digits even though the exponent
may grow up to 308. Before this change, printf("%g", 1e300) would
produce "1e+N0".
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The on-stack work buffer occupies 201 bytes by default. Now that we've
made the code able to cope with virtually unlimited width and precision
values, we can reduce stack usage to its strict minimum i.e. 25 bytes.
This allows for some additional sprintf tests exercizing wide results.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Even if the code used to limit the precision to the on-stack buffer
size, it was still possible to do:
printf("%f", 1.0e300);
which would overflow the stack and crash the program. Let fix this issue
and remove the precision limitation by recording the number of zeroes to
insert while converting the value and generating those zeroes only
when outputting the data.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Zero-padding of integers took place in the on-stack buffer before
justification. Let's perform that padding on the fly while sending
out data instead.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The z_prf() function currently allocates a 200-byte buffer on the
stack to copy strings into, and then perform left/right alignment
and padding. Not only this is a pretty large chunk of stack usage,
but this imposes limitations on field width and string length. Also
the string is copied not only once but _thrice_ making this code
less than optimal.
Let's rework the code to get rid of both the field width limit and
string length limit, as well as the two extra memory copy instances.
While at it, let's fixes printf("%08s", "abcd") which used to
produce "0000abcd".
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Mimic the glibc behavior when encountering an unknown conversion
specifier rather than silently skipping it.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This makes for nicer code by avoiding repetitions of the same pattern.
Changes to come will make more use of it.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Some cleanups before further changes:
- Remove dead leftover from the "case 's'" code.
- Remove needless parents and casts.
- Remove "register" qualifier as it is ignored. The compiler knows
better these days.
- Adjust tabs assuming standard 8-columns tab spacing.
- Make multi-line comments start with "/*" on a line of its own.
- Make the format string const to match prototypes in other files.
- Declare boolean variable and parameters as bool.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Hitting wundef in kernel_structs.h, switching to match other instances
where #ifdef is used instead of #if
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
This script is looking for a hyperspecific error (mismatched padding
when linking into two simultaneous output sections) that bit us once,
in an era where the linker scripts were less unified. We haven't seen
it crop up since, and multiple platforms have changed the way they do
this anyway.
It's needless complexity. Junk it.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We add a test-case for arch/arm/thread_swap, so the
test is executed with CONFIG_FLOAT/CONFIG_FP_SHARING
being enabled, if an FPU is available. We execute the
test extension with/without enabling compiler optimizations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes a test for the ARM swap, i.e. the
context-switch mechanism for the ARM architecture. The test
verifies that the thread state variables are set and checked
properly when performing a thread swap-out and swap-in.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Quoting GNU ar man/info page:
'D'
Operate in _deterministic_ mode. When adding files and the archive
index use zero for UIDs, GIDs, timestamps, and use consistent file
modes for all files. When this option is used, if 'ar' is used
with identical options and identical input files, multiple runs
will create identical output files regardless of the input files'
owners, groups, file modes, or modification times.
If 'binutils' was configured with
'--enable-deterministic-archives', then this mode is on by default.
It can be disabled with the 'U' modifier, below.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Let's use the PTR_DIFF() helper which performs pointer difference in a
64-bit compatible way, and use %zu for printing sizeof() results.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Some code casts pointers to ints in order to obtain their difference.
The compiler complains on 64-bit targets as an int is not wide enough
to hold a pointer.
Let's introduce the PTR_DIFF() helper macro to applies the proper cast
to pointers before performing a difference on them, and still return the
result as an int which should be large enough in practice.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In a3bea8872b (PR #16352)
_bt_br_channels_area was added to the code but not the
sanitycheck sections whitelist => Add it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
On SMP systems, currently scheduled threads are not in the run queue
and can't be unconditionally removoed/added.
Fixes#17170
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove whitelisting and make the test more generic. This test was only
building on 1 board basically, now with the new filters it builds on 24.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove whitelisting and enable broader testing on all boards with needed
features.
Add pwm to board yaml where it applies.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board uses the sam3 gpio driver. gpio_sam was selected by default
causing a conflict and issues when building for this board.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not all DTS changes are board specific and we should support overlays
that can be used with multiple boards. For example with a sensor, for
example:
Use this overlay for a sensor:
&arduino_i2c {
bme280@76 {
compatible = "bosch,bme280";
reg = <0x76>;
label = "BME280";
};
};
This will work with any board that has &arduino_i2c defined, but should
also work if you specify the instance directly (&i2c0 or &i2c1).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove old configurations of boards that do not support networking
natively and very custom and difficult to test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In c20ff1150f
and 5f19c8160a
(PR #16897)
_bt_settings_area was replaced with _settings_handlers_area
Update sanitycheck sections whitelist accordingly
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Correct the storage type of the thread status pointer
not assuming 32bit pointer and integer size
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
holyiot_yj16019 board uses nRF52832 SoC, which does not have 802.15.4
radio. Therefore, 802.15.4 should not be listed in it's capabilities.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The nRF 802.15.4 radio driver should not include nRF52840 header
directly, but rely on soc.h instead. Otherwise, it will not work with
different SoCs supporting 802.15.4.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Start to monitor Connected and Disconnect events and then start
and stop the echo service according to system connectivity status.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It currently only listens to relevant events about network interface to
decide whether raising connected or disconnected event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The code to sanitize the generated font path by removing bindir
improperly stripped the first character of every argument when --bindir
was not provided, corrupting the command documentation when fonts are
generated manually. Only sanitize if --bindir was provided with
non-empty content.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The size_t type is either compatible with an int on 32-bit target, or
a long on 64-bit targets. It could even be a long even on some 32-bit
targets. Let's use the z qualifier in the printf format to be compatible
with whatever flavor in use.
In case of pointers, let's just use %p with pointers directly and
avoid casts altogether.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix USB phy node for stm32l432 and stm32l452, which contain
a USB controller and not a OTG FS controller.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
In SAM SoCs Watchdog is selected by default and runs
with some default configuration, unless the build sets
CONFIG_WDT_DISABLE_AT_BOOT. As the tests/kernel/critical
takes relatively large amount of time to complete, the
watchdog (that is never fed in the test) will eventually
trigger a reset. As a result the test keeps restarting
continuously and never completes. We want to run the
test on SAM SoCs, so we do the following:
- filter our the SAM SoCs with the SAM WDT from the
default build
- introduce an alternative test-case for these SoCs
with the additional CONFIG_WDT_DISABLE_AT_BOOT
option set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Having this option disabled, MITM flag state can be controlled by
bt_conn_security state. This option is enabled by default to not
change the current implementation behavior.
Related to SM/MAS/SCPK/BV-01-C.
Fixes#17463
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
At the time these overlays were created the author was unclear on how to
correctly represent SPI chip selects on a target where the peripheral
does not control that signal. As such the pin assignment was present
only as documentation.
Enlightenment was subsequently achieved and the cs-gpios property should
be properly defined.
Note that the mesh feather does not define a chip select to be used with
the spi1 peripheral.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The Particle mesh feather boards provide device-tree overlays that
allow individual applications to select the SPI peripheral to be
used for the pins associated with a specific labelled SPI device.
This is necessary because different peripheral instances have slightly
different properties.
Add BOARD_DIR to DTS_ROOTS so these shared files can be located when
included from application-specific overlays.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that the generation script doesn't look at the "generation" in the
YAML, we can remove it from the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Remove dead code that referenced 'generation' but didn't do anything
with it
* Replace looking at 'generation' with a simple check for property
starting with # (for things like #address-cells, etc) or ending in
-map (for things like gpio-map) to skip
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree and its setting
for random/unique addresses.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Delete IPSP sample file, this source file is not included in any build
files. The service contains no valuable logic other than advertising
with the IPSP service in the advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the HID over GATT service into the sample that demonstrates it.
This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the Current Time service into the sample that demonstrates it.
This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the health thermometer service into the sample folder that
demonstrates it. This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
For using alpha numeric property values in a devicetree node, we
need to match the values starts with a number. Current scenario will
return the value as a numeric literal if it starts with a number. This
will not work for a compatible like, "96b-ls-con" which is proposed in
issue #15598.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use an assert to catch the situation where we can't find a port
to use for the reset line pin, since it shouldn't really happen.
The case where reset_pin_configure() is executed but no reset
line is selected can't happen due to static asserts in `integrity.c`
that enforce a reset line to be selected when the reset pin
functionality is enabled.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
This fixes the following error:
passing argument 5 of ‘fsutil_read_file’ from incompatible pointer type
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This patch updates the GAP ICS to 7.4.1.
It updates the Bluetooth Spec to 5.1 and added missing ICS tables.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
This commit contributes the basic testing for
k_float_disable() API, for ARM and x86 ARCHes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make fp_sharing a 'parent' test suite directory, and
rename the original fp_sharing test into
tests/kernel/fp_sharing/generic. In this
way more FP-related tests can be grouped
together in the same test directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For the x86 architecture the z_arch_float_disable() is only
implemented when building with CONFIG_LAZY_FP_SHARING, so we
make z_arch_float_disable() return -ENOSYS when we build with
FLOAT and FP_SHARING but on an x86 platform where
LAZY_FP_SHARING is not supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The implementation of z_impl_float_disable was missplaced
inside the #ifdef SPIN_VALIDATE. Fixing it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implementation of pinmux of usdhc depends on board design.
Usdhc driver could change pinmux according to SD mode, SoC
should provide API for this. Board pinmux should register
its pinmux function to SoC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
1) dts/bindings/mmc/mmc.yaml: specifies common mmc.
2) dts/bindings/mmc/nxp,imx-usdhc.yaml: specifies
nxp usdhc module which inherits mmc.
3) dts/arm/nxp/nxp_rt.dtsi: usdhc support on RT chip.
4) boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts:
usdhc slot support on mimxrt1050_evk board.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
The name disk_access_sdhc.c is ambiguous,
actually this driver depends on SPI,
rename this file.
In addition, move the generic sdhc stuff from C file
to head file for other sdhc drivers to use.
1) disk_access_sdhc.c->disk_access_spi_sdhc.c.
2) create .h and move sdhc specifications from .c to .h.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Handle optional argument UUID in bt_gatt_discover with type
DISCOVER_DESCRIPTOR, bt_uuid_cmp doesn't check for NULL pointer.
On system with MMU (nrf52_bsim) this can result in segfault.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Noticed this error print when running in mps2_an385 platform.
<err> net_if: There is no network interface to work with!
Adding CONFIG_NET_LOOPBACK=y removes this error. After this
the CONFIG_NET_IPV6_MLD=n needed to be added in order to avoid
crashes when IPv6 MLD is done which is not needed for this test.
Removed also the whitelisting as that is not really needed and
we want to run these in as many platforms as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sanitycheck --help mentions that west-flash requires device-testing
to be enabled (and indeed it does because DeviceHandler will never
be called where west_flash option is used. Let's generate an error
if west-flash is used w/o specifying device-testing.
Also cleanup help text which looks odd in both sanitycheck --help
and in the file itself.
Signed-off-by: Michael Scott <mike@foundries.io>
Several boards have multiple runners setup. We need a way to specify
which runner to use with sanitycheck. Introduce --west-runner option.
Signed-off-by: Michael Scott <mike@foundries.io>
Added flags for controling detection of setting alarm to late.
Updated drivers to return -ENOTSUP when new option is requested.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Let's remove depends on NET_LLDP from all the options. It avoids this:
# CONFIG_NET_LLDP is not set
# CONFIG_NET_LLDP_LOG_LEVEL_OFF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_ERR is not set
# CONFIG_NET_LLDP_LOG_LEVEL_WRN is not set
# CONFIG_NET_LLDP_LOG_LEVEL_INF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_DBG is not set
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT=y
CONFIG_NET_LLDP_LOG_LEVEL=3
CONFIG_NET_LLDP_CHASSIS_ID="CHASSIS_ID_PLACEHOLDER"
CONFIG_NET_LLDP_PORT_ID="PORT_ID_PLACEHOLDER"
And instead it will generate this:
# CONFIG_NET_LLDP is not set
Make the menu as an enablement config option as well.
Adapting lldp header file relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARP, LLDP and GPTP functions have dummies in case of being disabled so
let's use IS_ENABLED() accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix assert in controller checking ticker_id_prepare = 0 when
a scanner and connection are active, and the connection is
skipping events in order to resize Rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the reset of ticker_id_prepare variable to the early
return in event_connection_prepare function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we receive IPv6 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17450
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We don't have any uses of this form of define so deprecate it for now.
If needed this should be DT_INST_<INSTANCE ID>_<COMPAT>_BUS_<BUS>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted LED and SW to use DT_ prefix we can mark the
non-DT_ prefixed versions as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted all _GPIO_ to _GPIOS_ we can mark the _GPIO_
form as deprecated (same for _PWM_ / _PWMS_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of minor issues with the 'fixed-clock' support:
* Fix the #clock-cells to be 0
* Fix nxp_ke1xf.dtsi to set #clock-cells 0 and the clock reference to
only be a phandle.
* Fix the generation script to only generate what it should for a
'fixed-clock'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A few clock bindings only have a single clock cell defined, but the
binding described more than one cell.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
sanitycheck takes any "extra_config" list found in the testcase.yaml
file and generates an "overlay" file from it. This file is placed in
the per-test build directory and passed to cmake/kconfig.cmake through a
-DOVERLAY_CONF= option set in the (also) generated sanity-out/Makefile.
This commit moves this generated config overlay to a subdirectory one
level down from the build directory, otherwise kconfig.cmake picks it
up *twice*: once from the -DOVERLAY_CONF= option already mentioned above
and a second time because kconfig.cmake scans the build directory and
blindly picks up ALL files ending with .conf[*]. The second pickup is
problematic because kconfig.cmake currently gives it the top precedence,
even higher than anything the user espressed with --extra-args=CONFIG_*
Here's a quick and simple demonstration of the issue fixed by this
commit:
cd $ZEPHYR_BASE/samples/net/sockets/net_mgmt/
sanitycheck -T. -p qemu_x86 -b -v # --extra-args=CONFIG_USERSPACE=y|n
grep CONFIG_USERSPACE $(find sanity-out/ -name .config)
.net_mgmt.kernelmode/zephyr/.config: # CONFIG_USERSPACE is not set
.net_mgmt.usermode/zephyr/.config: CONFIG_USERSPACE=y
grep 'Merged configuration' $(find sanity-out/ -name build.log)
Without this commit, attemps to override anything with
--extra-args=CONFIG_ are silently dropped on the floor.
For more background this issue was found while using the recipe in
commit message 4afcc0f8af
[*] picking up all .conf files is debatable but a much bigger debate
with backward compatibility implications. This small fix makes
absolutely zero difference to anyone or anything not using sanitycheck.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Converts all net samples that enable the mcr20a 802.15.4 driver to use
the frdm_cr20a shield instead of hardcoding configs for the frdm_k64f
base board. This makes it possible to build mcr20a samples for other
base boards with compatible arduino headers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 2a63e342f4.
This needs to be reverted as otherwise the type of ssize_t will be
"unsigned long" which is not correct.
(gdb) ptype ssize_t
type = unsigned long
For example this check would fail in that case
ssize_t foo(void)
{
return -1;
}
...
if (foo() < 0) {
printk("This is never called\n");
}
Fixes#17378
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Issue faced while running bluetooth sample (peripheral, central, ...)
on stm32wb55rg with the latest zephyr version
Signed-off-by: Roger N'Guessan <roger.nguessan@st.com>
When performing OTA using the LwM2M subsys, several logging errors
regarding log_strdup were noted. Let's fix these.
Signed-off-by: Michael Scott <mike@foundries.io>
If a sample wants to use the Zephyr implementation of mbedtls, it
enables CONFIG_MBEDTLS and sets any needed Zephyr-specific mbedtls
options.
Currently, the LwM2M subsystem selects MBEDTLS automatically when
LWM2M_DTLS_SUPPORT is enabled. Let's remove this and let the
LwM2M client sample enable mbedtls and it's options.
This mimics the behavior of several other network-related samples
and removes conflicts when selecting alternate implementations of
MBEDTLS.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17399
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_parse_peerinfo().
The functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_sprint_ip_addr(). The
functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
NOTE: Also fixes an issue where a NULL is returned when the IP address
is unknown. This usually ends up with a crash/abort in the logging
code.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
If we receive IPv4 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17427
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If DNS server(s) are added or removed e.g., as part of DHCP
processing, send newly defined net-mgmt events so that
a user application may get this information.
Fixes#16924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Match the speed speficied for all boards using the jlink runner when
using the pyocd runner on the same board.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Removing an IPv4 router was missing, as well as finding the default
router for an IPv4 address.
Note howevere that IPv4 router features are not used anywhere yet. But
at least the API is there and is a 1:1 to IPv6, if that matters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- router lifetime is always a u16_t so fixing
net_if_ipv6_router_update_lifetime() signature.
- Coalescing router timers into one: this reduces the net_if_router
structure by 22 bytes
- refactor IPv6 and IPv4 router code so it's handled in generic
functions, to avoid duplicating 90% of the code for each family. This
also fixes the lifetime support for IPv4 which was missing.
Note however that IPv4 routing support seems to be missing as none of
the relevant functions are used anywhere yet.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will probably be at some point a way to remove IPv4 router, and
thus it will require such event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_ipv6 by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_ipv6 can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 network interface
It starts to be interesting if it has 2+ network interfaces then.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_addr by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_addr can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 unicast IPv6
address. It's a nice memory improvment once it has 2+ unicast IPv6
address. Note that having IPv4 enabled along with IPv6 will also see
memory improvements since both IPv6 and IPv4 use the same struct
net_if_addr.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DAD use dad_count attribute in struct net_if_addr, since DAD is ran on
each and every ipv6 unicast address.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's regroup all the IPv4 related function into one ifdef. There is no
need to implement a dummy function for each: if IPv4 is not enabled,
these functions are unused in the core.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's regroup all the IPv6 related function into one ifdef. There is no
need to implement a dummy function for each: if IPv6 is not enabled,
these functions are unused in the core.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Logger had false assumption that once log_panic is called then
context switch will never occur and was not protecting against
reentrancy in panic mode. Added interrupt locking when accessing
unprotected part.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The function sys_trace_thread_switched_out asserts in case
sys_trace_thread_switched_in was not called first. This is unintended
as tracing.h describes that out should be called before in, thus the
reverse of what the assert expects.
Fix assert on initial thread switch in, where out is called with
current_thread being NULL.
Signed-off-by: Danny Oerndrup <daor@demant.com>
To allow NRF drivers to include nrfx HAL or drivers headers
like with the real HAL, include the top nrfx/ folder
just as the real nrfx does.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Provide two basic example samples to test the x-nucleo-iks01a3 shield:
- Standard (Mode 1)
- SensorHub (Mode 2)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
x-nucleo-iks01a3 shield is an arduino compatible companion board
which can be used on top of Nucleo standard boards. It extend
the Nucleo functionalities adding following MEMS sensor support:
- LSM6DSO accel and gyro
- LIS2MDL magnetometer
- LIS2DW12 accel
- LPS22HH pressure
- HTS221 humidity
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The hostname needs to have log_strdup() when printing it.
Also it is useful to print information if the sending fails.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- answer offset was 1 byte off.
- request offset, when copied into the answer, was off as well.
Fixes#16142
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There are a few reasons why sanitycheck will only build a test and not
run it: list them in the developer guide. Also lists the --options that
provide that information and update their --help message.
A couple other --help fixes.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Skip the TCP options before giving the data to application.
Without this, the TCP options would be passed to the application.
Fixes#17055
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes -Werror=format: '%x' expects argument of type 'unsigned int', but
argument N has type 'long unsigned int'
Reproduced with sanitycheck -p bl652_dvk (or -p any other
HAS_SEGGER_RTT) and by adding CONFIG_SEGGER_SYSTEMVIEW=y to
samples/philosophers/prj.conf. sanitycheck adds -Werror.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Removed lvgl sources from CMakefile.txt and only keep zephyr glue
logic.
Further added lvgl module to west.yml.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
The special 'unittest' target has largely been supersesed by
native_posix, and converting this to a regular test will allow
us to see code coverage for the CRC functions in our coverage
reports.
Fixes: #16943
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When stripped symbols are present in the build size_report has crashed
due to it not being aware of this case.
This patch causes stripped symbols to be ignored instead, allowing
analysis of the non-stripped symbols.
It is left as future work to somehow display how much space stripped
symbols are taking up.
Stripped symbols can be present when third-party binaries are linked
into the build.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This patch adds support for the STM32 nucleo_g071rb board
from STMicroelectronics.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch adds support for the STM32G071xx
from STMicroelectronics.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update to documentation for the sample audio application running
on Sue Creek S1000 board from Intel.
Added section on how to control the audio application on target
from a Linux host and updated the console output section
accordingly.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add python script and associated configuration YAML file
to control audio sample application running on
Intel Sue Creek S1000 from a Linux host.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add tuning driver, audio block processing threads,
background processing thread and USB transport driver
to the cmake build in audio sample app.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add a status check to start/stop audio in order to start
audio only if it's not already running and to stop audio
only if it is running.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add processing threads for small/large audio blocks
in audio sample app for Intel® Sue Creek S1000 board
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add USB transport driver to control the sample application
from a host connected to Intel® Sue Creek S1000 board
via an USB interface.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Compilers (at least gcc and clang) already provide max value definitions
for basic types. It makes sense to rely on them to properly support
both 32-bit and 64-bit builds.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Cleanup around USB_NRFX_EVT_QUEUE_SIZE option.
Add value range for USB_NRFX_EVT_QUEUE_SIZE to Kconfig.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use REQTYPE_GET_DIR and REQTYPE_GET_TYPE macros from
USB subsystem instead of specially introduced.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
flash_erase cannot erase a page from the STM32xx SOC flash. It seems
that the erase wait time is not enough and against to what the SOC's
datasheet states. As a result this patch doubles the wait time.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Check the device state before nrfx_usbd_disable and
nrfx_usbd_uninit. Otherwise it may lead to an ASSERT
inside the HAL driver.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Do not use NRF_USBD_EP_NR_GET in ep_is_valid because
it masks the higher nibble. Although this behavior is valid
to get an index from an endpoint, it is not suitable to check
if the address is incorrect, such as: 0x11.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Forced attempt to set the device address is unpredictable
and also should not be done during testing.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Two sections are needed: bt_l2cap_fixed_chan and bt_l2cap_br_fixed_chan.
However the second one cannot be created using #define as the
preprocessor will expand it to the first before compilation happens,
sending bt_l2cap_br_fixed_chan instances in the wrong section.
This fixes commit 4e8ddfd640 ("Bluetooth: L2CAP: Make use of
Z_STRUCT_SECTION_ITERABLE").
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We need to increase the stack sizes if user enables CONFIG_COVERAGE
option. You can test this by this command
sanitycheck --coverage -p qemu_x86 -T tests/net/udp \
-T tests/net/mgmt -T tests/net/mld
This is partial fix for issues described in #17323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move BUILD_ASSERT to the end of K_MEM_POOL_DEFINE.
K_MEM_POOL_DEFINE can not be processed if
combined with an other macro like __section.
Fixes: #17313
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Check for ZEPHYR_SDK_INSTALL_DIR being invalid instead of
checking for SDK_VERSION being not defined. This change
relates to commit bb09c458c1 ("cmake: Prevent infinite
recursion").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check if the buffer size is not empty before spi transceive and buffer's
data processing. This fixes the need to slow down MCUs to 16MHz when
using BlueNRG-MS chips.
Tested samples : Beacon, Central, Peripheral
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Provide doc for stm32h747i_disco.
Includes basic description for building and flashing
individual cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Protect gpio_configure function in dual core context.
This operation is not needed for other fuctions of the api:
* init
* read
* write
Protecting gpio_configure also protects access to
interrupt_controller IP.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32H7, in Dual core configuration, we restrict configuration
access to CM7 core. CM4 can access to API but not the init part of
the driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for C-M4 core on STM32H7 series.
It is enabled in Dual core context with 2 alternatives boot methods:
* Boot CM4 CM7: Both core boot at reset, then CM4 enters Stop mode.
CM7 performs system configuration then finally wakes up CM4
* Boot CM7, CM4 Gated: Only CM7 boots at reset. Once done with
system configuration it triggers (requires option byte update)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide basic clock control driver for STM32H7.
Bus clock activation is done through CM7 and CM4 common registers
so we don't have to care to the CPU Id before accessing.
Accesses are not protected for now. Only possible configuration
is system clock source set to HSE driven PLL.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If the socket descriptor is invalid (fd < 0), there is no
need to try to close it.
Coverity-CID: 198949
Fixes#16785
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is testing size_mul_overflow() in z_impl_k_msgq_alloc_init() so
make sure OVERFLOW_SIZE_MSG is large enough even on 64-bit targets.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This allows for inclusion of out-of-tree toolchain cmake files
relating to compiler and linker for both target and generic
toolchains.
The base path used was ZEPHYR_BASE, instead of TOOLCHAIN_ROOT, thus
making it impossible to load the out-of-tree toolchain specific
cmake files.
In addition, the generic toolchain may now specify a generic cmake
file for the linker, similar to the target toolchain linker.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Doxygen comment was referencing deprecated function counter_set_alarm
when the intention was to reference counter_set_channel_alarm.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
... because this test does use userspace, as seen in the source or
demonstrated by the failure of this command:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n
See commit message of 4afcc0f8af for the long story.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The handcrafted allocation falls victim of misaligned structures due to
toolchain padding which crashes the socket test code on 64-bit targets.
Let's move it to the iterable section utility where those issues are
already taken care of.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
A comma was added to a new path in
9dbdd81abe
But GitHub's CODEOWNERS parsing cannot handle commas in paths
=> Remove it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Port the implementation that does radio event abort due to
ISR latencies. The implementation measures if the ISR could
not meet the hard real time deadline and closes the event
early.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added interface to get Advertiser and Scanner instance
handle for use in Lower Link Layer module.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The code in shell_history_put() adds padding to new entries so they
are pointer aligned. The whole buffer has to be so aligned too.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
sizeof(value) returns the size of the pointer, not the pointed string.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
tests/bluetooth/gatt/src/main.c
The --jobs default was recently changed in commit 9f4f57eed3, update
its help message.
Add the hopefully last missing verbose("Spawning...") statement.
Fix comment updated in commit 095b82a301.
Replace two tags with whitespace.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The current version is 32-bit specific, so move it to ia32/
and add a layer of indirection via an arch-level header file.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Refactoring 32- and 64-bit subarchitectures, so this file is moved
to ia32/ and a new "redirector" header file is introduced.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This data is subarchitecture-specific, so move it to ia32/
and add a layer of indirection at the architecture level.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some of this is 32-bit specific, some applies to all subarchitectures.
A preliminary attempt is made to refactor and place 32-bit-specific
portions in ia32/kernel_arch_data.h.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file merely declares external functions referenced only
by ia32/cache.c, so the declarations are inlined instead.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file was used to generate offsets for host tools that are no
longer in use, so it's removed and the offsets are no longer generated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Over time, this has been reduced to a few functions dealing solely
with floating-point support, referenced only from core/ia32/float.c.
Thus they are moved into that file and the header is eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The accounting data stored at the beginning of a memory block used by
malloc must push the returned memory address to a word boundary. This
is already the case on 32-bit systems, but not on 64-bit systems where
e.g. struct k_mem_block_id still has a size of 4.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
sanitycheck is opening an insane number of file descriptors
simultaneously as it opens up communication pipes with
every test that supports emulation, on every emulated
board target.
Increase the resource limit on open files until this code
can be properly refactored.
Workaround for: #17239
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support to STM LSM6DSO 6-axis IMU sensor driver.
This driver supports communication with device though both
I2C and SPI bus and both polling and drdy trigger mode.
This driver supports also the sensorhub mode with the possibility
to connect a maximum of two external devices, typically a
magnetometer and an environmental sensor, currently selected among
following devices: lis2mdl magnetometer, lps22hh or lps22hb
pressure and temperature sensors, HTS221 humidity sensor.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support to STM LPS22HH pressure and temperature sensor.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
OpenThread did not verify if the interface provided in the net_mgmt
handler is actually an OpenThread interface. In result, when multiple
network interfaces were used, different interfaces were processed by the
OpenThread handler, ending up in a crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This was dumping coverage before the test code even ran.
Ideally, this gets re-written to use ztest, but meanwhile
place a dummy main thread which sleeps forever, and dump
coverage once the test succeeds.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These empty functions needed to be declared static inline
or we get build errors if the header is included by more
than one C file.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make sure the IPv4 and IPv6 socket addresses are initialized before
copying them. This avoids uninitialized memory access.
Coverity-CID: 199436
Fixes#17202
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface events should be in L2 layer so there
is no one that would emit L1 events so no need for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Ensure that xcc is at parity with gcc and clang by inferring missing
definitions based on those that it already provides.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The zephyr_stdint.h file enforces Zephyr specific policies on the
compilation environment. Let's give compilers a chance to provide
definitions of their own via TOOLCHAIN_C_FLAGS prior the inclusion
of zephyr_stdint.h.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Commit f57ba2d30c ("cmake: toolchain_cc_imacros: don't use space
separated arguments") moved toolchain_cc_imacros() to using the long
argument format in order to avoid spaces that CMake uses to delimitate
and deduplicate arguments.
It seems that xcc doesn't support the --imacros=foo form. However
it does support the short "combined" -imacrosfoo form (without space).
So let's use that instead and document the caviat.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
If user has set CONFIG_NET_CONTEXT_TIMESTAMP then enable
network packet throughput collection for UDP packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to activate the network packet statistics
collection. Note that we do not have resources to calculate
each network packet transit times but we collect average times
instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adds coverage for the uncovered json_calc_encoded_len()
and covers a bunch more error cases.
This gets us up to 90.1% line coverage and 100% function
coverage.
Fixes: #16944
Partial fix for: #16011
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- The --gcov-tool argument now has a reasonable default
if the Zephyr SDK is in use.
- --coverage-platform, if unspecified, defaults to what
was passed to --platform
- --coverage implies --enable-slow, so that tests with
the 'slow' tag are built and run.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current CMSIS v2 implementation is clearly assuming that timeout
arguments being passed to e.g. osDelay() are in units of Zephyr ticks,
not milliseconds as specified by ARM or (inconsistently) assumed by
our test code.
Most tests work with the ~100 Hz default tick rate, but they tend to
fail on precision issues at higher tick rates. Force the CMSIS v2
applications to be 1000 Hz for now as a workaround, and detect the
mismatch as a build failure.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to assume that k_busy_wait() and CMSIS
osKernelSysTick() (which is just k_cycle_get_32()) were perfectly
synchronized. On nRF, they aren't (one is the 32 kHz RTC timer, the
other is a calibrated spin loop using the CPU frequency).
When ticks were being reported at 100 Hz granularity, there wasn't
enough precision to detect the mismatch. Now there is. Rework the
test to require that the clocks match to within 1%.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test seems a little confused. It does a POSIX usleep() for 90ms,
then checks the time taken, and verifies that it was no less
than... 91ms!
On existing platforms, tick alignment makes sure that we always take a
little longer, so this passes. But on high tick rate configurations we
get it exactly right. And fail.
Adjust the calibration to allow (exactly) 90ms sleeps. Also fixed a
comment that described the wrong units.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to properly align its millisecond-measured wait
time and assumed that there would be no other overhead. In fact on
fast tick rate systems (or even ones where the alignment computation
doesn't provide the needed padding as "slop") that's not quite enough
time to complete the full test. There are cycles between the sleep
calls that need to be accounted for, and aren't.
Just give it one extra work item of time before failing. We aren't
testing work queue timing precision here, just evaluation semantics.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
"50" ticks is fine with 100 Hz timer precision but way too short to
survive the conversion to milliseconds on fast, non-decimal tick
rates. Make it half a second, which was the original intent.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to assume ~100 Hz ticks in ways that are
difficult to fix. It wants to sleep for periods on the order of the
TICKLESS_IDLE_THRESH kconfig, which is extremely small on high tick
rate systems and (on nRF in particular) does not have a cleanly
divisible representation in milliseconds.
Fixing precision issues by cranking the idle threshold up on a
per-system basis seems like an abuse, as that is what we want to be
testing in the first place. Just let the test run at the tick rate it
has always expected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The logic about minimal sleep sizes due to "tick" aliasing was
correct, but drivers also have similar behavior with "cycle" aliasing
too. When cycles are 3-4 orders of magnitude faster than ticks, it's
undetectable noise. But now on nRF they're exactly the same and we
need to correct for that, essentially doubling the number of ticks a
usleep() might wait for.
The logic here was simply too strict, basically. Fast tick rates
can't guarantee what the test promised.
Note that this relaxes the test bounds on the other side of the
equation too: it's no longer an error to usleep() for only one tick
(i.e. an improved sleep/timeout implementation no longer gets detected
as a test failure).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The scheduler API has always allowed setting a zero slice size as a
way to disable timeslicing. But the workaround introduced for
CONFIG_SWAP_NONATOMIC forgot that convention, and was calling
reset_time_slice() with that zero value (i.e. requesting an immediate
interrupt) in circumstances where z_swap() had been interrupted
nonatomically.
In practice, this never happened. And if it did, it was a single
spurious no-op interrupt that no one cared about. Until it did,
anyway...
Now that ticks on nRF devices are at full 32 kHz speed, we can get
into a situation where the rapidly triggering timeslice interrupts are
interrupting z_swap() calls, and the process feeds back on itself and
becomes self-sustaining.
Put that test into the time slice code itself to prevent this kind of
mistake in the future.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The default tick rate is now 10 kHz, but that driver was demanding
that it be exactly 1 kHz instead of at least that rate. I checked the
source, and the driver isn't actually extracting "ticks" from the
kernel illegally, it just needs fine-grained timers that work with the
existing millisecond API. Let it build, this is fine.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The sleep test was checking that the sleep took no longer than "2
ticks" longer than requested. But "2 ticks" for fast tick rate
configurations can be "zero ms", and for aliasing reasons it's always
possible to delay for 1 unit more than requested (becuase you can
cross a millisecond/tick/whatever boundary in your own code on either
side of the sleep). So that "slop" value needs to be no less than
1ms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The test for the k_uptime_delta utilities was calling it in a loop and
waiting for the uptime to advance. But the code was specifically
wanting it to advance 5ms or more at one go, which clearly isn't going
to work for a tick rate above 200 Hz.
The weird thing is that the test knew this and even commented about
the limitation. Which seems silly: it's perfectly fine for the clock
to advance just a single millisecond. That's correct behavior too.
Let's test for that, and it will work everywhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When ticks are sub-millisecond, the math produces minimum and maximum
values for the slice duration test that are equal. But because of
aliasing across tick boundaries, it's always possible (for any time
period, nothing specific to time slicing here) to measure one tick
more than an intended duration. So make sure there's always at least
a range of 1ms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
As with the STM32 boards, these had an existing default for tick rate
that is now lower than the 10 kHz default. They're SysTick devices
that can handle the higher rate just fine. Use that.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The nRF timer runs at only 32 kHz, so there's little reason to try to
divide it to get a synthesized tick rate. Just use the raw clock as
the tick rate, which provides maximal precision and very
singnificantly simplifies the generated code for the ISR.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The ARC timer is a MHz-scale cycle counter and works very well with
the new 10 kHz default tick rate. Remove the settings for ARC
hardware.
Note that the nsim board definitions are left at 100 Hz. That is a
software emulation environment that (like qemu) exposes the host clock
as "real" time and thus is subject to clock jitter due to host
scheduling.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These all have what appears to be a promiscuously cut-and-pasted
declaration for a 1000 Hz tick rate. They are all SysTick boards and
will work very well with the new 10 kHz default, so use that instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When tickless is available, all existing devices can handle much
higher timing precision than 10ms. A 10kHz default seems acceptable
without introducing too much range limitation (rollover for a signed
time delta will happen at 2.5 days). Leave the 100 Hz default in
place for ticked configurations, as those are going to be special
purpose usages where the user probably actually cares about interrupt
rate.
Note that the defaulting logic interacts with an obscure trick:
setting the tick rate to zero would indicate "no clock exists" to the
configuration (some platforms use this to drop code from the build).
But now that becomes a kconfig cycle, so to break it we expose
CONFIG_SYS_CLOCK_EXISTS as an app-defined tunable and not a derived
value from the tick rate. Only one test actually did this.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Tick rate is becoming a platform tunable in the tickless world. Some
apps were setting it due to requirements of drivers or subsystems (or
sometimes for reasons that don't make much sense), but the dependency
goes the other way around now: board/soc/arch level code is
responsible for setting tick rates that work with their devices.
A few tests still use hard-configured tick rates, as they have
baked-in assumptions (like e.g. "a tick will be longer than a
millisecond") that need to be addressed first.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This code was clearly written to assume that the timeout argument to
k_mem_pool_alloc() was in ticks and not ms. Adjust to what appears to
have been the intent. It was working as intended (i.e waiting one or
1/10th of a second) only on systems where the default tick rate was
100 Hz.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When the tick rate was less than MIN_DELAY, bumping a "too soon"
expiration by just one tick may not be enough and we could
theoretically miss the counter.
Instead, eliminate the MIN_DELAY computation and write to the spec:
NRF guarantees that the RTC will generate an interrupt for a
comparator value two cycles in the future. And further, we can test
at the set point to see if we "just missed" the interrupt (i.e. zero
cycles delay) and flag a synchronous interrupt. So we only need to
miss a requested interrupt now for the special case of exactly one
cycle in the future, and then we're only late by one cycle. That's
optimal.
Also fixes an off-by-one in the next cycle computation. By API
convention, an ticks argument of one or less means "at the next tick"
and not "right now". So we need to add one to the target cycle to
avoid incorrectly triggering a synchronous interrupt. This was a
non-issue when a tick is longer than a hardware cycle but is needed
now.
Also handles the edge case with zero latency interrupts (which are
unmaskable) which might mess up timing. This was always a problem,
but we're more sensitive now and it's comparatively more likely to
occur.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We have a number of timing sensitive tests which run
correctly on a much more frequent basis if the system
is not so heavily loaded. Instead of squeezing a few
more crumbs of performance by doubling the CPU count,
just use the number of CPUs reported by the system.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* if thread switchs in interrupt, the target sp must be in
thread's kernel stack, no need to do hardware sp switch
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
If maxsize is smaller than _MPOOL_MINBLK, then Z_MPOOL_LVLS() will be 0.
That means the loop in z_sys_mem_pool_base_init() that initializes the
block free list for the nonexistent level 0 will corrupt whatever memory
at the location the zero-sized struct sys_mem_pool_lvl array was
located. And the corruption happens to be done with a perfectly legit
memory pool block address which makes for really nasty bugs to solve.
This is more likely on 64-bit systems due to _MPOOL_MINBLK being twice
the size of 32-bit systems.
Let's prevent that with a build-time assertion on maxsize when defining
a memory pool, and adjust the affected test accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The "bits" field in struct sys_mem_pool_lvl is unioned with a pointer.
That leaves more space for inline free bits on 64-bit targets.
Let's declare it as an array and adjust its size based on the pointer
size. On 32-bit targets the generated code remains identical.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Minimum alignment and rounding must be done on a word boundary. Let's
replace _ALIGN4() with WB_UP() which is equivalent on 32-bit targets,
and 64-bit aware.
Also enforce a minimal alignment on the memory pool. This is making
a difference mostly on64-bit targets where the widely used 4-byte
alignment is not sufficient.
The _ALIGN4() macro has no users left so it is removed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
If GCOV coverage is enabled, the coverage dump happens after
"PROJECT EXECUTION SUCCESSFUL" is printed. In some cases,
the additional time added was not enough to capture all the
GCOV output on a heavily loaded system before the emulator
gets killed.
Ideally, the decision to kill the emulator needs to be smarter
and less race-prone, but that can wait for a future
enhancement.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
UART related defines in STM32F7 files where filled with
references to USART.
Instances 4, 5, 7 and 8 of SoC serial port are actually UARTs.
So rename define's accordingly. Otherwise it couldn't build.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Don't allow inadvertent use of the existing z_x86_msr_read() when
compiled in long mode (CONFIG_X86_LONGMODE) as it won't work.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inlines currently only apply to IA32, so place accordingly.
Minor changes to direct and indirect users of the file for ordering.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is only included from arch.h, so merge it into same. This
also avoids confusion with files in arch/x86/include/ of the same name.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The compiler is going to make better per-arch/per-implementation
choices about bit operations, so let's use the common definitions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This header is currently IA32-specific, so move it into the subarch
directory and update references to it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Making room for the Intel64 subarch in this tree. This header is
32-bit specific and so it's relocated, and references rewritten
to find it in its new location.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is currently IA32-specific, so it is moved and the
reference to it at the arch-independent layer is moved.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is 32-bit specific, so it is moved into the ia32/ directory
and references to it are updated accordingly.
Also, SP_ARG* definitions are no longer used, so they are removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Eliminate definitions for MSRs that we don't use. Centralize the
definitions for the MSRs that we do use, including their fields.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This pattern exists in both the include/arch/x86 and arch/x86/include
trees. This indirection is historic and unnecessary, as all supported
toolchains for x86 support gas/gcc-style inline assembly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
z_arm_do_syscall is executing in privileged mode. This implies
that we shall not be allowed to use the thread's default
unprivileged stack, (i.e push to or pop from it), to avoid any
possible stack corruptions.
Note that since we execute in PRIV mode and no MPU guard or
PSPLIM register is guarding the end of the default stack, we
won't be able to detect any stack overflows.
This commit implement the above change, by forcing
z_arm_do_syscall() to FIRST switch to privileged
stack and then do all the preparations to execute
the system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to correct the inline comment in swap_helper.S,
which is suggesting that system call attempts with
invalid syscall IDs (i.e. above the limit) do not force
the CPU to elevate privileges. This is in fact not true,
since the execution flow moves into valid syscall ID
handling.
In other words, all we do for system calls with invalid
ID numbers is to treat them as valid syscalls with the
K_SYSCALL_BAD ID value.
We fix the inline documentation to reflect the actual
execution flow.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
System call arguments are indexed from 1 to 6, so arg0
is corrected to arg1 in two occasions. In addition, the
ARM function for system calls is now called z_arm_do_syscall,
so we update the inline comment in __svc handler.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The IPC peripheral is missing from the list of
supported HW for nRF9160, so this commit adds
that.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
target_sources() documentation states:
Relative source file paths are interpreted as being relative to the
current source directory (i.e. CMAKE_CURRENT_SOURCE_DIR).
Remove spurious code duplicating cmake's behaviour. It proved to be a
time-consuming red herring while debugging some path-related issue and
"less is more".
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit changes the TX priority from ID based priority to
chronological order. The advantage is that when messages with
the same ID are sent, the order is retained.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Removed the STM32 CAN_Init function and implemented the initialization
in the driver.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
So the time used to run boards which use the BinaryHandler can be
reported, record the time used from spawning the process until
it finnishes or is killed.
The BinaryHandler is used by the "native" boards, unit tests,
nsim and Renode.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The AN521 is a Soft Macro Model implementation of the SSE-200 subsystem
with SIE-200 and CMSDK components targeting the MPS2+ board. The
SSE-200 subsystem implements two Cortex-M33 cores.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Recursive make should be invoked as $(MAKE) and not "make" for reasons
documented at
https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html
$(MAKE) is what CMake puts in all the CMakeFiles/Makefile2 it generates,
it doesn't use "make" either.
Issue found thanks to the following warning:
build.log:make[4]: warning: jobserver unavailable: using -j1.
Add '+' to parent make rule.
If CMake is invoked with -GNinja or other then fall back on "make" as
before and pray that it's available.
Fast reproduction with:
make -j2 -C build clean mylib_project VERBOSE=1
Build directories have been compared before/after this change and
there's zero difference except the generated
mylib_project.dir/build.make file (and the warning above) when using
make.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fix an issue in the gatt_register routine where removing a service and
adding it again would cause the database to have non-ascending
orderdered handles numbers and lead to an incomplete service discovery.
Fix: Go through the database and look for a place where to insert
the new service.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
Adding Health Thermometer Service sample. Refer to Health Thermometer
Profile Specification for detailed information about the Health
Thermometer Profile.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
We use the following commands to rename any
LED._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_LED._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l LED._GPIO_CONTROLLER | xargs sed -i 's/LED\(.\)_GPIO_CONTROLLER/DT_ALIAS_LED\1_GPIOS_CONTROLLER/g'
git grep -l LED._GPIO_PIN | xargs sed -i 's/LED\(.\)_GPIO_PIN/DT_ALIAS_LED\1_GPIOS_PIN/g'
git grep -l LED._GPIO_FLAGS | xargs sed -i 's/LED\(.\)_GPIO_FLAGS/DT_ALIAS_LED\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Extended clock configuration to allow usage of external clock
source for nrf52 series.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Support for external LF clock source for nrf52811 was missing.
This is a temporary fix until it is replaced with new version of
nrfx which will contain the fix.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Check return value of net_if_ipv6_get_ll() before accessing it.
Coverity-CID: 199437
Fixes#17201
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously we always used the board identifier (via CONFIG_BOARD) as
identifier, however this causes troubles in case of tests with multiple
boards of the same kind on the same server. The device_id addresses that
problem nicely if enabled and supported by the architecture.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Renames the "Blueooth Controller Assertion Handler" to "Application
Defined Assertion Handler" to better fit the purpose of the Kconfig
option.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Start es-wifi TCP server on accept.
An asynchronous (spi) message is received on client connection.
Only one connection is supported at a time.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
In order to prevent potential deadlock in various callbacks such as
accept, recv, etc... Add support for nested eswifi locking, allowing
callee to safely access back to the eswifi methods.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The eswifi controller can generate events via asynchronous messages
which can be polled via the 'MR\r' command. The messages will have a
Start Of Message Asynchronous [SOMA] and End Of Message Asynchronous
[EOMA] delimiters.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This mechanism had multiple problems:
- Missing parameter documentation strings.
- Multiple calls to k_thread_name_set() from user
mode would leak memory, since the copied string was never
freed
- k_thread_name_get() returns memory to user mode
with no guarantees on whether user mode can actually
read it; in the case where the string was in thread
resource pool memory (which happens when k_thread_name_set()
is called from user mode) it would never be readable.
- There was no test case coverage for these functions
from user mode.
To properly fix this, thread objects now have a buffer region
reserved specifically for the thread name. Setting the thread
name copies the string into the buffer. Getting the thread name
with k_thread_name_get() still returns a pointer, but the
system call has been removed. A new API k_thread_name_copy()
is introduced to copy the thread name into a destination buffer,
and a system call has been provided for that instead.
We now have full test case coverge for these APIs in both user
and supervisor mode.
Some of the code has been cleaned up to place system call
handler functions in proximity with their implementations.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the offset within the thread struct to the
ARC arch-specific 'relinquish_cause' member is too
large, ld_s instructions referencing it will not
compile. This happens easily if CONFIG_THREAD_NAME
reserves a name buffer within the thread struct, since
all the arch-specific members come last.
Use the regular 'ld' instruction instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On some STM32 series, I2C HAL defines I2C_SPEED_STANDARD and
I2C_SPEED_FAST. These definitions conflict with Zephyr I2C API.
Since Zephyr I2C STM32 driver uses LL API, we can disable I2C HAL.
Disable I2C HAL for L1 and F2 series. Deactivation is already done
2 other impacted series F1 and F4.
Additionally, on F1 series, add the commented definition line to
make the change more visible.
Requires https://github.com/zephyrproject-rtos/hal_stm32/pull/16
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This test uses ztest, there is no need to set this and it
was breaking builds with CONFIG_COVERAGE=y
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test AF_NET_MGMT API getsockopt() and setsockopt() functions that
they work properly when called from kernel or from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only setting and getting of Ethernet Qav options are
supported via this interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print IP address for added or removed IP address. This helps
to understand what IP address is being removed or added.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add unit tests to net_addr_ntop() and net_addr_pton() in order to
verify that the functions can be called from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the net_mgmt event has some info, like IP address, that
could be sent, then send it the same time. This is very useful
for the receiver of the event in order to know that is happening
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to listen network management events using
BSD socket API. Application needs to create the socket using
AF_NET_MGMT address family. At this point we only support
receiving network management events that the network subsystem
is sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The info parameter is difficult to use if the caller does not
get information how long the info struct is. So add info_length
parameter to net_mgmt_event_wait_on_iface() and
net_mgmt_event_wait() APIs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
HW stack protection in ARMv8-M is implemented by default
with the built-in stack guard mechanism. Therefore, by
default all tests for ARMv8-M will use the built-in stack
overflow mechanism (CONFIG_BUILTIN_STACK_GUARD is set in
tests). However, we would like have some coverage on the
MPU stack guard mechanism for ARMv8-M. The added test case
manually disables BUILTIN_STACK_GUARD and enables the
MPU_STACK_GUARD option, to provide that test coverage.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARMv8-M architecture supports the built-in stack overflow
detection mechanisms via the SPLIM registers. However, the
user might still wish to use the traditional MPU-based stack
overflow detection mechanism (for testing or other reasons).
We now allow the user to enable HW stack protection, but
manually turn off BUILTIN_STACK_GUARD option. This will force
the MPU_STACK_GUARD option to be selected.
It is still not allowed for the user to not select any stack
guard mechanisms, if HW_STACK_PROTECTION is selected.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_TEST_HW_STACK_PROTECTION is set by default in tests,
and that one selects HW_STACK_PROTECTION option. Therefore,
we do not need to set that one explicitly in the test project
configuration files. We clean up some redundant occurrences of
CONFIG_HW_STACK_PROTECTION=y from the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for the FXOS8700CQ present on the NXP TWR-KE18F
development board. The FXOS8700CQ IRQ lines are not connected by
default on the TWR-KE18F, so only polling (no trigger) is supported.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for polling the sensor values of the FXOS8700 device when
no trigger (interrupt) is enabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
sflists have a couple APIs related to sfnodes that aren't
present for slists. There were uncovered, write some tests
for them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We were testing all the slist APIs, but not the sflist
variant. Make a copy of the slist tests for sflist,
with the names properly changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some of the slist APIs were only being indirectly exercised;
add to the slist test case to cover everything explicitly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There's no need for a system call for this; futexes live in
user memory and the initialization bit is ignored.
It's sufficient to just do an atomic_set().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes the issue where observations are automatically reported using
the minimum period instead of the maximum. This causes notifications to
be sent more frequently than configured when the resource does not
change.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Current socket connect call implementation always takes
K_FOREVER timeout value, which blocks TCP connections
in case failure. TCP connections waits until it receives
SYN ACK. If there is no SYC ACK means, connect call is
blocked forever.
Added a Kconfig option to define timeout value. Default
value is 3000 milliseconds. User can modify it.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify dns_unpack_answer() function to check if the answer is
compressed or not, and return correct values regardless.
Fixes#16594
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Needed an explicit test for this function for code
coverage purposes; we were relying indirectly on
other code using it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Work around a testcase problem, where we want to check some
logic for the bounds check bypass mitigation in the common
kernel code. By changing the ifdef to the x86-specific option
for these lfence instructions, we avoid IAMCU build errors
but still test the common code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Error cases weren't being tested; bring up coverage for
kernel/futex.c up to 100% file/function/branch.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No test was exercising the k_usleep() system call, run
the test case as a user thread to fix code coverage.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test error cases and alternative implementation to bring code
coverage up to 100% file / 100% line.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This function doesn't do anything, and only exists so that
it can be overridden later, exclude from coverage reports.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is an oddball API. It's untested. In fact testing its proper
behavior requires very elaborate automation (you need a device outside
the Zephyr hardware to measure real world time, and a mechanism for
getting the device into and out of idle without using the timer
driver). And this makes for needless difficulty managing code
coverage metrics.
It was always just a hint anyway. Mark the old API deprecated and
replace it with a kconfig tunable. The effect of that is just to
change the timeout value passed to the timer driver, where we can
manage code coverage metrics more easily (only one driver cares to
actually support this feature anyway).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix the start of the guard to take into account the
configurable size of the guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The counter API changed recently, and more specifically the
counter_set_top_value() now takes a configuration structure instead of
direct parameters. Adapt the rtc.h header so that it uses the new
signature correctly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The adc shell makes it possible to configure ADC_0 and ADC_1 for testing
purposes. It includes helpful printouts if the number of arguments is
wrong.
Signed-off-by: Nicolai Glud <nigd@prevas.dk>
This patch adds generation of `*_FIXED_CLOCK_FREQUENCY` macros for
clock consuming nodes that are provided with a fixed rate clock.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
* here use new style z_arch_switch,i.e. CONFIG_USE_SWITCH
to replace old swap mechnism.
* it's also required by SMP support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This change will allow an MQTT client to override the compile-time
keepalive if desired. The change is structured such that the
compile-time default will still be setup by calling mqtt_client_init,
but can be changed by the application before calling mqtt_connect if
desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
This patch is needed in order to get compilable macros for compatibles
like "arm,cortex-m0+".
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We use the following commands to rename any _PWM_{CONTROLLER,CHANNEL}
to *_PWMS_{CONTROLLER,CHANNEL}
Used the following commands to make these changes:
git grep -l '[A-Z_0-9]*_PWM_CONTROLLER' | xargs sed -i 's/\([A-Z_0-9]*\)_PWM_CONTROLLER/DT_ALIAS_\1_PWMS_CONTROLLER/g'
git grep -l '[A-Z_0-9]*_PWM_CHANNEL' | xargs sed -i 's/\([A-Z_0-9]*\)_PWM_CHANNEL/DT_ALIAS_\1_PWMS_CHANNEL/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Low speed isn't supported in device mode for any of the STM32
references.
Remove the code that refer to it.
Fixes#17114
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change @file entry on some headers due to duplicated files in the
include/ tree (real header + shim).
Adapt the doxygen configuration file to the new locations and remove
directories which are already included.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/gcov.h to debug/gcov.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/speculation.h to sys/speculation.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/sflist.h to sys/sflist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/rb.h to sys/rb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mempool.h to sys/mempool.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mempool_base.h to sys/mempool_base.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras_impl.h to sys/math_extras_impl.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/list_gen.h to sys/list_gen.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/libc-hooks.h to sys/libc-hooks.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/fdtable.h to sys/fdtable.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/errno_private.h to sys/errno_private.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move display.h to drivers/display.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sensor.h to drivers/sensor.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move rtc.h to drivers/rtc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pwm.h to drivers/pwm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move pinmux.h to drivers/pinmux.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move led_strip.h to drivers/led_strip.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move led.h to drivers/led.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2s.h to drivers/i2s.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move hwinfo.h to drivers/hwinfo.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gna.h to drivers/gna.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move dma.h to drivers/dma.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move counter.h to drivers/counter.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move can.h to drivers/can.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move aio_comparator.h to drivers/aio_comparator.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move adc.h to drivers/adc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move watchdog.h to drivers/watchdog.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move zephyr/jwt.h to data/jwt.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move json.h to data/json.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move power.h to power/power.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move disk_access.h to disk/disk_access.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move crc.h to sys/crc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move base64.h to sys/base64.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move nvs/nvs.h to fs/nvs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fcb.h to fs/fcb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tty.h to console/tty.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move console.h to console/console.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Suppress warnings from deprecated header shims. Use when you have an
application that needs to work with older versions of Zephyr where
headers were located in different directories.
The shim will go away after two releases, so make sure to adapt your
application for the new locations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test the HW stack protection feature for threads that are
pre-tagged as FPU users, when building with support for FP
shared registers mode (CONFIG_FP_SHARING=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a short note in reference/kernel/other/float.
The note instructs to apply pre-tagging of ARM threads to
indicate that they indend to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under FP shared registers mode (CONFIG_FP_SHARING=y),
a thread's user_options flag is checked during swap and
during stack fail check. Therefore, in k_float_disable()
we want to ensure that a thread won't be swapped-out with
K_FP_REGS flag cleared but still FP-active (CONTROL.FPCA
being not zero). To ensure that we temporarily disable
interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit reworks the ARM stack fail checking, under FP
Sharing registers mode, to account for the right width of
the MPU stack guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For threads that appear to be FP-capable (i.e. with K_FP_REGS
option flag set), we configure a wide MPU stack guard, if we
build with stack protection enabled (CONFIG_MPU_STACK_GUARD=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When an FP capable thread (i.e. with K_FP_REGS option)
transitions into user mode, we want to allocate a wider
MPU stack guard region, to be able to successfully detect
overflows of the privilege stack during system calls. For
that we also need to re-adjust the .priv_stack_start pointer,
which denotes the start of the writable area of the privilege
stack buffer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When an FP capable thread is created (i.e. with K_FP_REGS
option) we want to allocate a wider MPU stack guard region,
to be able to successfully detect stack overflows. For that
we also need to re-adjust the values that will be passed to
the thread's stack_info .start and .size parameters.
applicable) for a thread which intends to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Commit 212ec9a29a / feature #14121 already ordered partitions by
decreasing size, however it was common in samples/userspace/shared_mem/
/sample.kernel.memory_protection.shared_mem for two partitions to have
the same size and be randomly ordered between them. This adds the
partition name as a second sort key.
Unlike previous attempt in commit 725abdf430 this doesn't use the
partition name as the first (and only) key and doesn't break the
decreasing size order. Huge thanks to Sigvart Hovland for spotting this
in a post-merge but prompt code review.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This reverts commit 725abdf430 which did get rid of randomness in the
order of the partition _names_ as claimed but regressed commit
212ec9a29a / feature #14121 and broke the previous size order which I
missed. Huge thanks to Sigvart Hovland for spotting this in a post-merge
but prompt code review. Proper fix in the next commit.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Return value from close() can be ignored in sntp_close()
as it is not returning value to caller anyway.
Coverity-CID: 198863
Fixes#16584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds the necessary bits to utilize the x86_64 toolchain
built by sdk-ng for x86_64 when toolchain variant is either
zephyr or xtools. This allows decoupling the builds from
the host toolchain.
Newlib is also available with this toolchain so remove
the Kconfig restriction on CONFIG_NEWLIB_LIBC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The libc hooks for Newlib requires CONFIG_SRAM_SIZE and
the symbol "_end" at the end of memory. This is in preparation
for enabling Newlib for x86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This new SDK:
() Fixes an issue with i586 toolchain where no coverage data
would be produced;
() Adds a new x86_64 toolchain for building x86_64
targets, decoupling x86_64 builds from host toolchain;
() Includes MIPS toolchain;
() Reverts bossa to older version to fix flashing issues;
() Turns on multilib support for RISC-V; and,
() Updates OpenOCD for TI and some ARC fixes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix path for system_timer.h and loapic.h, we moved it to
include/drivers/timer/ and include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test needs trivial modification to account for new APIC timer code.
Eventually CONFIG_APIC_TIMER_IRQ, CONFIG_LOAPIC_TIMER_IRQ, etc. will
be consolidated into one CONFIG_TIMER_IRQ to reduce the noise a bit.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is the "flagship" platform for the new local APIC timer driver.
The opportunity is taken clean up the configuration as well, so the
choice of local APIC vs HPET timer requires changing only one Kconfig.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The existing local APIC timer driver (loapic_timer.c) has bitrotted
and doesn't support TICKLESS_KERNEL, which is the preferred mode of
operation. This patch introduces a completely new driver, called
the APIC timer driver - the name is changed to allow the drivers to
continue to coexist in the short term, and also because "APIC timer"
isn't ambiguous (the I/O APICs do not have timers).
This driver makes no attempt to work with the MVIC timer as the
previous version did, because MVIC support is deprecated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Ignore the Emacs TAGS file generated by scripts/tags.sh. Move the
entry for the lower-case tags file to the correct section.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Dictionaries are not ordered in Python 3.5 and before, so building twice
in a row could lead to a different partition order, different
build/zephyr/include/generated/app_smem_*.ld files and different
binaries.
Fix with a minor change to the "for" loop in the output function:
make it iterate on sorted(partitions.items()) instead of the raw and
randomly ordered partitions dictionary.
It is easy to reproduce the issue even without downgrading to an
obsolete Python version; pick a test like samples/userspace/shared_mem/
and simply change the code to this:
--- a/scripts/gen_app_partitions.py
+++ b/scripts/gen_app_partitions.py
@@ -159,10 +159,12 @@ def parse_elf_file(partitions):
partitions[partition_name][SZ] += size
+import random
def generate_final_linker(linker_file, partitions):
string = linker_start_seq
size_string = ''
- for partition, item in sorted(partitions.items()):
+ for partition, item in sorted(partitions.items(),
+ key=lambda x: random.random()):
string += data_template.format(partition)
if LIB in item:
for lib in item[LIB]:
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Dictionaries are not ordered in Python 3.5 and before, so building twice
${ZEPHYR_BASE}/samples/application_development/code_relocation/
in a row could lead to a different sections order, different
build/zephyr/include/generated/linker_relocate.d and code_relocation.c
and different binaries.
Fix with a minor change to three "for" loops in the output functions:
make them iterate on sorted(list of sections) instead of the raw and
randomly ordered dictionaries of sections.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
types.h was wrongly defining unsigned as signed and following
undefining it. This definition was not being used anywhere though.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Log all send errors, but don't try to call e.g. prov_send_fail_msg()
since that'll almost certainly fail as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 | Section 5.4.2.3:
"The Provisioner and the device shall check whether the public key
provided by the peer device or obtained OOB is valid (see Section
5.4.3.1).
When the Provisioner receives an invalid public key, then provisioning
fails, and the Provisioner shall act as described in Section 5.4.4.
When the device receives an invalid public key, then provisioning
fails, and the device shall act as described in Section 5.4.4."
This is also in Erratum 10395 which is Mandatory for Mesh v1.0.
The code was already rejecting the key, however that rejection
happened only after we had already sent our public key as response,
which got interpreted as acceptance by the tester (PTS).
Fixes MESH/NODE/PROV/BI-13-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 Section 5.4.2.3: "If the public key was not
available using an OOB technology, then the public keys are exchanged
between the Provisioner and the unprovisioned device. For each
exchange, a new key pair shall be generated by the Provisioner and the
unprovisioned device."
This allows passing MESH/NODE/PROV/BV-12-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Clear the callback list once generation is complete and we've done
calling all callbacks. This lets us use bt_pub_key_gen() multiple
times, which before this patch could have resulted in a corrupt linked
list.
Also remove redundant callback dispatching from bt_pub_key_gen() since
the function checks for the PUB_KEY_BUSY flag in the beginning, i.e.
there cannot be other pending generation actions at this point in the
code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update code to handle other users of the public key generation APIs
by fetching the current public key at the beginning of each SMP
session. This is particularly important if someone creates the (rather
odd) combination of Mesh and SMP where Mesh will regenerate a new
key pair after provisioning.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mismatch in Public Key type will cause device to send Invalid Format
error, and treat any further PDU's as unexpected.
This affects MESH/NODE/PROV/BI-03-C test case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provisioning errors shouldn't cause device to close link. Upon error,
device will send Provisioning Failed PDU, and any further PDU's will
be considered as unexpected as per Mesh Profile section 5.4.4.
Also a timer is started every time device sends or receives a PDU.
This affects MESH/NODE/PROV/BV-10-C test case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The shim didn't check if a given endpoint was enabled before requesting
the nrfx_usbd driver to perform a read or write operation on it.
In certain circumstances this led to nrfx_usbd driver being stuck in
a loop waiting for the associated DMA transfer to complete.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This reverts commit 03ef375f5f.
The cfg.en flag contains only the state of the endpoint as seen by the
shim. It is mainly used to enable the endpoints when the USB peripheral
becomes ready for operation (and the USB stack may want to enable some
endpoints earlier, especially the control ones, so the operation must
be sometimes deferred). In particular, setting this flag to false has
no effect on the actual state of the endpoint in the hardware.
Moreover, this flag was set to false for all the endpoints, including
the control ones which should not be disabled, so such operation
actually fooled the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch removes the "hard" selection of the USB_DEVICE_REMOTE_WAKEUP
Kconfig option for USB devices made on the nRF52840 SoC. Now it's up to
the application to decide if it wants to enable the option. This change
makes it possible to pass the USB3CV Chapter 9 Tests for applications
that don't use the remote wakeup feature, since when a USB device only
reports that it supports this feature, and the mentioned option makes
it to do so, one of the test cases expects the USB device to actually
perform the remote wakeup. And when the feature is not reported as
supported, the test case is skipped.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Clean up the INPUT paths for doxygen scanning:
- directory scans include sub-directories so no need
to include them explicitly
- remove excluded (legacy) includes that no longer exist
Sync directory changes in the CMakeLists.txt (as noted in the comments)
Add content to the home page of the doxygen-generated HTML, and add a
Zephyr branding theme.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes: #6773
Add support for Kinetis MK64 series.
Interrupts are adapted because MK64 has other interrupts than KEx1F.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add UDP support for eswifi driver. eswifi now can co-exist
with TCP and UDP functionality with 4 as max socket connection.
Tested UDP with custom DNS sample (wifi connect + DNS)
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Port the lis2dw12 sensor driver on top of the lis2dw12_StdC
HAL interface (in modules/hal/st/sensor/stmemsc/).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This update contains the following changes
* Introduce STM32G0 Cube V1.2.0
* Update API for STM32MP1 IPCC
* Update Cube version for following series:
STM32F0XX: from version: V1.9.0 to version: V1.10.1
STM32F1XX: from version: V1.6.1 to version: V1.7.0
STM32F4XX: from version: V1.21.0 to version: V1.24.1
STM32F7XX: from version: V1.12.0 to version: V1.15.1
STM32L0XX: from version: V1.10.0 to version: V1.11.2
STM32L1XX: from version: V1.8.0 to version: V1.9.0
STM32L4XX: from version: V1.13.0 to version: V1.14.0
STM32WBXX: from version: V1.0.0 to version: V1.1.1
* Includes a fix for L4 following package update
* Includes a fix for G0 following package introduction
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We have directives in conf.py to create redirect links for docs that
have been moved around because of content reorganization. Reduce the
number of messages written out while debugging was going on and add some
comments to conf.py to explain how the directive works.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When using a build folder format with build.dir-fmt that includes any
parameters that need resolving, the west runners cannot find the folder
since the required information (board, source dir or app) is not
available.
Add a very simple heuristic to support the case where a build folder
starts with a hardcoded prefix (for example 'build/') and a single build
is present under that prefix.
The heuristic is gated behind a new configuration option:
build.guess-dir
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added a fix handling L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the bluetooth module to use static handlers. Removed the
old bt specific static registration.
The routine bt_settings_init() is still calling settings_init() which
IMO is not needed anymore.
Updates:
changed SETTINGS_REGISTER_STATIC() to SETTINGS_STATIC_HANDLER_DEFINE()
changed settings_handler_stat type to settings_handler_static type
removed NULL declarations
renamed bt_handler to bt_settingshandler, as bt_handler already exists.
renamed all bt_XXX_handler to bt_xxx_settingshandler to avoid any
overlap.
changed SETTINGS_STATIC_HANDLER_DEFINE() to create variable names from
_hname by just prepending them with settings_handler_.
updated all bt_xxx_settings_handler to just bt_xxx.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Add the possibility to register handles to ROM using a new macro
SETTINGS_REGISTER_STATIC(handler), the handler is of type
settings_handler_stat and has to be declared as const:
```
const struct settings_handler_stat test_handler = {
.name = "test", /* this can also be "ps/data"
.h_get = get,
.h_set = set,
.h_commit = NULL, /* NULL defines can be ommited */
.h_export = NULL /* NULL defines can be ommited */
};
SETTINGS_REGISTER_STATIC(test_handler);
```
To maintain support for handlers stored in RAM (dynamic handlers)
`CONFIG_SETTINGS_DYNAMIC_HANDLERS`must be enabled, which is by default.
When registering static handlers there is no check if this handler has
been registered earlier, the latest registered static handler will be
considered valid for any set/get routine, while the commit and export
routines will be executed for both registered handlers.
When a dynamic handler is registered a check is done to see if there was
an earlier registration of the name as a static or dynamic handler
registration will fail.
To get to the lowest possible RAM usage it is advised to set
`CONFIG_SETTINGS_DYNAMIC_HANDLERS=n`.
Updates:
a. Changed usage of RAM to DYNAMIC/dynamic, ROM to STATIC/static
b. Updated settings.h to remove added #if defined()
c. Make static handlers always enabled
d. Corrected error introduced in common-rom.ld.
e. Changed return value of settings_parse_and_lookup to
settings_handler_stat type to reduce stack usage.
f. Updated the name generated to store a handler item in ROM. It now
uses the name used to register in combination with the line where
SETTINGS_REGISTER_STATIC() is called.
g. renamed settings_handler_stat type to settings_handler_static
h. renamed SETTINGS_REGISTER_STATIC to SETTINGS_STATIC_HANDLER_DEFINE()
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The path was changed during generating Ninja-based build system,
so the path of link script file was wrong when testing the
cross-compiler. Fix it by giving the absolute path for link script.
Signed-off-by: Howard Liu <howardliu7874@hotmail.com>
The commit contributes a simple test for the Zero-Latency
IRQ feature (CONFIG_ZERO_LATENCY_IRQS=y) for ARM platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARM builds with support for user mode, i.e. with
CONFIG_USERSPACE=y, we need to align the beginning
of the heap space, to respect the ARM MPU region
alignment requirements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
USED_RAM_END_ADDR is not used when Kconfig option
CONFIG_NEWLIB_LIBC_ALIGNED_HEAP_SIZE is defined,
therefore, we do not need to define the macro in
that specific case.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
* when -mcpu is given, e.g. -mcpu=em4_dmips,-mnorm,-mdiv_em
etc. are already given, no need to duplicate
* use zephyr_compiler_options to replace zephyr_cc_option
zephyr_cc_option will do compile option check first then add
the checked options into option list. It's too strict that makes
options like -mfpu, -mmpy-option cannot be added.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The conditional CONFIG_RISCV32 was misspelled in is_rodata() resulting
in the test failing all strings that are in RODATA section.
Additionally, it was using wrong section names for riscv.
Fixes#17065
Signed-off-by: David Leach <david.leach@nxp.com>
While fixing the ASSERT expressions in mem_domain.c to use
%lx instead of %x for uintptr_t variables, commit
f32330b22c has overlooked
one ASSERT expression specific to ARMv8-M. This causes
printk compilation warnings for ARMv8-M builds, so we
provide a fix here.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The string returned by bt_uuid_str() is not in ROM so log_strdup()
must be used on it. This also eliminates the following kind of warning
messages: "<err> log: argument 3 in log message "%s: start_handle
0x%04x end_handle 0x%04x type %s" missing log_strdup()."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add board support for 96Boards Avenger96 board from Arrow Electronics
based on STM32MP157A MPU from ST Microelectronics. This board is one
of the consumer editions boards of the 96Boards family following the
Extented CE form factor. More information about this board can be found
in 96Boards website: https://www.96boards.org/product/avenger96/
By default Zephyr console output is available via RAM console, but it
can also be changed to UART7 exposed as UART0 on 40 pin LS header.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Updated MEC1501 HAL headers. Add interrupt routing defines for timers.
Fix eSPI virtual wire source access. Add new headers for Port80
capture and TFDP.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Assert if the UART device is NULL to help with debugging whenever
there's an issue locating the correct UART instance.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use Device Tree,and in particular a new 'bt-c2h-uart' to select which
UART is being used to communicate with an external BLE Host when acting
as a Controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Unfortunately this seems to have introduced spurious failures on (at
least) qemu_x86 and qemu_xtensa.
The change limits the timeslice tolerance to +/- 1ms, which isn't
necessarily correct when the tick rate is less than 1ms (though it
will probably work on deterministic hardware as long as the system is
hitting the target at exactly the right tick), and isn't even
theoretically achievable on emulation environments where timing
granularity is limited by the host scheduling quantum.
What this needs to do is check the deadline is off by at most one
tick, and trust the platform integration to have set the tick rate
appropriately.
(I do worry that the earlier version of the test was trying to set the
limit at half the TICKLESS_IDLE_THRESHOLD, though -- that seems weird,
and hints that maybe the test is trying to do something more
elaborate?)
Fixes#17063.
This reverts commit 62c71dc4d8.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Clear Linux exports to all users a list of "aggressive" compiler and
linker flags. Zephyr's CMake build system will either warn or fail
because of these. Add one magic command that solves the issue.
More background information at https://superuser.com/a/1452523/111302
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Folks found the use of @rststar/@endrststar non-intuitive (wanted to use
@rststart). The "star" was there indicating the doxygen comment lines
had a leading asterisk that needed to be stripped, but since our
commenting convention is to use the leading asterisk on continuation
lines, the leading asterisk is always there. So, change the doxygen
alias to the more expected @rst/@endrst.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Compilers (at least gcc and clang) already provide definitions to
create standard types and their range. For example, __INT16_TYPE__ is
normally defined as a short to be used with the int16_t typedef, and
__INT16_MAX__ is defined as 32767. So it makes sense to rely on them
rather than hardcoding our own, especially for the fast types where
the compiler itself knows what basic type is best.
Using compiler provided definitions makes even more sense when dealing
with 64-bit targets where some types such as intptr_t and size_t must
have a different size and range. Those definitions are then adjusted
by the compiler directly.
However there are two cases for which we should override those
definitions:
* The __INT32_TYPE__ definition on 32-bit targets vary between an int
and a long int depending on the architecture and configuration.
Notably, all compilers shipped with the Zephyr SDK, except for the
i586-zephyr-elfiamcu variant, define __INT32_TYPE__ to a long int.
Whereas, all Linux configurations for gcc, both 32-bit and 64-bit,
always define __INT32_TYPE__ as an int. Having variability here is
not welcome as pointers to a long int and to an int are not deemed
compatible by the compiler, and printing an int32_t defined with a
long using %d makes the compiler to complain, even if they're the
same size on 32-bit targets. Given that an int is always 32 bits
on all targets we might care about, and given that Zephyr hardcoded
int32_t to an int before, then we just redefine __INT32_TYPE__ and
derrivatives to an int to keep the peace in the code.
* The confusion also exists with __INTPTR_TYPE__. Looking again at the
Zephyr SDK, it is defined as an int, even even when __INT32_TYPE__ is
initially a long int. One notable exception is i586-zephyr-elf where
__INTPTR_TYPE__ is a long int even when using -m32. On 64-bit targets
this is always a long int. So let's redefine __INTPTR_TYPE__ to always
be a long int on Zephyr which simplifies the code, works for both
32-bit and 64-bit targets, and mimics what the Linux kernel does.
Only a few print format strings needed adjustment.
In those two cases, there is a safeguard to ensure the type we're
enforcing has the right size and fail the build otherwise.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Because CMake explicitly deduplicates arguments, it is not possible
to use toolchain_cc_imacros() multiple times as the later "-imacros"
are stripped away, leaving the associated file arguments dangling.
The documented workaround in the CMake manual involves some "SHELL:..."
construct but that doesn't get through zephyr_compile_options()
undammaged.
Let's simply remove this issue altogether by replacing "-imacros x.h"
with the joined form "--imacros=x.h" instead. Both gcc and clang
support this syntax.
FYI, this joined form is also available for other arguments such as:
-include x.h --> --include=x.h
-A foo --> --assert=foo
-D foo --> --define-macro=foo
-U foo --> --undefine-macro=foo
Etc.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Currently, the free block bitmap is roughly 4 times larger than it
needs to, wasting memory.
Let's assume maxsz = 128, minsz = 8 and n_max = 40.
Z_MPOOL_LVLS(128, 8) returns 3. The block size for level #0 is 128,
the block size for level #1 is 128/4 = 32, and the block size for
level #2 is 32/4 = 8. Hence levels 0, 1, and 2 for a total of 3 levels.
So far so good.
Now let's look at Z_MPOOL_LBIT_WORDS(). We get:
Z_MPOOL_LBIT_WORDS_UNCLAMPED(40, 0) = ((40 << 0) + 31) / 32 = 2
Z_MPOOL_LBIT_WORDS_UNCLAMPED(40, 1) = ((40 << 2) + 31) / 32 = 5
Z_MPOOL_LBIT_WORDS_UNCLAMPED(40, 2) = ((40 << 4) + 31) / 32 = 20
None of those are < 2 so Z_MPOOL_LBIT_WORDS() takes the results from
Z_MPOOL_LBIT_WORDS_UNCLAMPED().
Finally, let's look at _MPOOL_BITS_SIZE(. It sums all possible levels
with Z_MPOOL_LBIT_BYTES() which is:
#define Z_MPOOL_LBIT_BYTES(maxsz, minsz, l, n_max) \
(Z_MPOOL_LVLS((maxsz), (minsz)) >= (l) ? \
4 * Z_MPOOL_LBIT_WORDS((n_max), l) : 0)
Or given what we already have:
Z_MPOOL_LBIT_BYTES(128, 8, 0, 40) = (3 >= 0) ? 4 * 2 : 0 = 8
Z_MPOOL_LBIT_BYTES(128, 8, 1, 40) = (3 >= 1) ? 4 * 5 : 0 = 20
Z_MPOOL_LBIT_BYTES(128, 8, 2, 40) = (3 >= 2) ? 4 * 20 : 0 = 80
Z_MPOOL_LBIT_BYTES(128, 8, 3, 40) = (3 >= 3) ? 4 * ??
Wait... we're missing this one:
Z_MPOOL_LBIT_WORDS_UNCLAMPED(40, 3) = ((40 << 6) + 31) / 32 = 80
then:
Z_MPOOL_LBIT_BYTES(128, 8, 3, 40) = (3 >= 3) ? 4 * 80 : 0 = 320
Further levels yeld (3 >= 4), (3 >= 5), etc. so they're all false and
produce 0.
So this means that we're statically allocating 428 bytes to the bitmap
when clearly only the first 3 Z_MPOOL_LBIT_BYTES() results for the
corresponding 3 levels that we have should be summed e.g. only
108 bytes.
Here the code logic gets confused between level numbers and the number
levels, hence the extra allocation which happens to be exponential.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The free block bitmap uses either extra memory specified by a pointer
in struct sys_mem_pool_lvl or the space occupied by that pointer
directly if the bitmap length is small enough to fit it.
But the test is wrong. the inline bitmap should be used if the number
of required bits is smaller or _equal_ to the pointer size. Not doing so
would wrongly bounce the free block bitmap to extra memory when the
number of blocks is exactly 32, which is in disagreement with
Z_MPOOL_LBIT_WORDS() that correctly returns 0 in that case.
In theory that mean that this bug would causes an overflow of the free
block bitmap whenever one level has exactly 32 blocks. But right now
there is a separate bug fixed separately that over-sizes the extra block
bitmap mitigating this bug.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
When splitting the pointer from the flag, ~SYS_SFLIST_FLAGS_MASK remains
a 32-bit value because of the lack of an L qualifier. Let's qualify it
with UL so the top half of 64-bit pointers is not truncated.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We had no system call coverage for k_thread_suspend
and k_thread_resume.
Some unnecessary cleanup tasks in the test case have
been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The block_fits() predicate was borked. It would check that a block
fits within the bounds of the whole heap. But that's not enough:
because of alignment changes between levels the sub-blocks may be
adjusted forward. It needs to fit inside the PARENT block that it was
split from.
What could happen at runtime is that the last subblocks of a
misaligned parent block would overlap memory from subsequent blocks,
or even run off the end of the heap. That's bad.
Change the API of block_fits() a little so it can extract the parent
region and do this properly.
Fixes#15279. Passes test introduced in #16728 to demonstrate what
seems like the same issue.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We didn't have code coverage for this function anywhere
except indirectly through some network tests; exercise it
in the suite of userspace tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Address a coverage gap in kernel/userspace.
Unfortunately, in the process of fixing this, a bug was
discovered, see #17023.
This test is user mode specific, filter the testcase
on whether userspace is available instead of ifdefing
the code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We had plenty of coverage for k_cycle_get(), but not its
32-bit variant. Run a case in user mode so that the system
call handler gets covered.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Print a friendlier error message on ValueError, but don't throw away
the stack trace.
Move another call to log.die().
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Follow along with changes made in west flash/debug/etc to make it
easier to see the output steps visually.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Having common log handlers now lets us improve our logging output so
that info messages are prefixed with the runner they came from, and
doing something similar with the high level steps as we go, like this:
-- west <command>: using runners
-- runners.RUNNER_NAME: doing something
<output from RUNNER_NAME subprocesses go here>
-- runners.RUNNER_NAME: all done, bye
We can also colorize the west output to make it stand out better from
subprocesses, using the same output formatting style that west
commands like west list do.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
I've had some requests to be able to use code in the runners package
without having west installed.
It turns out to be pretty easy to make this happen, as west is
currently only used for west.log and some trivial helper methods:
- To replace west log, use the standard logging module
- Add an appropriate handler for each runner's logger in
run_common.py which delegates to west.log, to keep
output working as expected.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Move modem_receiver.h to the driver directory. No other users in the
tree and it is a private header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for timer:
include/drivers/timer
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The assumption that the value handle is one past the attribute handle
works for Zephyr servers but may not be true for others. Avoid the
hard-coded system-specific assumption.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Although the Characteristic Value descriptor is required to be
immediately after the characteristic descriptor, the specification
allows for gaps in the corresponding Attribute handles. Use the value
handle from the characteristic descriptor for value reads.
See BLUETOOTH CORE SPECIFICATION Version 5.1 Vol 3, Part G section 2.5.1
(p. 2345), first paragraph.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support so that we can flag any "defines" associated with a call to
either extract_cells or extract_controller as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We never set 'use-prop-name' on clock bindings so lets just always
use CLOCK_CONTROLLER as the define name we generate.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have 'use-prop-name' flag in the bindings which is specifically used
for GPIO properties to control if we get "GPIO" or "GPIOS" as the
generated define name.
Lets remove the inconsistancy and use "GPIOS" as the preferred name as
this matches the DTS property name. Towards that we will generate both
forms and remove support for 'use-prop-name'.
This also impacts "PWM" generation. So we'll have "PWM" and "PWMS"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add nordic boards to the whitelist to ensure that compilation is
checked by the CI.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is useful that the ptp_clock_get() function can be called from
the userspace. Create also unit test for calling that function
from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This was only enabled by the MVIC, which in turn was only used
by the Quark D2000, which has been removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Update the Replay Protection List handling for segmented messages to
be more in line with Figure 3.43 in Mesh Profile Specification 1.0.
This means that the RPL check and update need to be split into two
independent steps rather than always doing these together.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit introduces new top_value setting configuration structure
with flag for controlling resetting of the counter during change of
top value.
Such change allows for #12068 implementation on hardware which
does not provide alarms.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
A k_futex is a lightweight mutual exclusion primitive designed
to minimize kernel involvement. Uncontended operation relies
only on atomic access to shared memory. k_futex structure lives
in application memory. And when using futexes, the majority of
the synchronization operations are performed in user mode. A
user-mode thread employs the futex wait system call only when
it is likely that the program has to block for a longer time
until the condition becomes true. When the condition comes true,
futex wake operation will be used to wake up one or more threads
waiting on that futex.
This patch implements two futex operations: k_futex_wait and
k_futex_wake. For k_futex_wait, the comparison with the expected
value, and starting to sleep are performed atomically to prevent
lost wake-ups. If different context changed futex's value after
the calling use-mode thread decided to block himself based on
the old value, the comparison will help observing the value
change and will not start to sleep. And for k_futex_wake, it
will wake at most num_waiters of the waiters that are sleeping
on that futex. But no guarantees are made on which threads are
woken, that means scheduling priority is not taken into
consideration.
Fixes: #14493.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This adds initial test for GATT APIs that don't require a connection
thus can be run without any extra setup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds initial test for L2CAP APIs that don't require a connection
thus can be run without any extra setup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should no longer be needed to set NO_QEMU_SERIAL_BT_SERVER manually
when setting CONFIG_BT_NO_DRIVER.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For the ARM architecture we would like to test the HW
Stack Protection feature when building with support for
FP shared registers mode (CONFIG_FP_SHARING=y), as a
means of increasing coverage.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable the MCUX SCG clock controller driver by default for the NXP
Kinetis KE1xF SoC series. Move the generic CLKOUT configuration from
SoC to the clock controller driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Allow individual specification of the time quanta used for the CAN bus
propagation segment and phase segment 1.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for two CAN bus controller instances and disable both of
them by default. Enable CAN_1 for the STM boards currently supporting
CAN.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Similar deal to commit cc14c40a2d ("kconfiglib: Unclutter symbol
strings, avoid redundant writes, misc.").
Hide the direct dependencies in the defaults, selects, and implies
sections. Do the same in menuconfig/guiconfig as well.
This uses a new Kconfiglib API, so update Kconfiglib to upstream
revision 164ef007a8. This also includes some minor optimizations and
cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In z_sys_mem_pool_block_alloc() the size of the first level block
allocation is rounded up to the next 4-bite boundary. This means one
or more of the trailing blocks could overlap the free block bitmap.
Let's consider this code from kernel.h:
#define K_MEM_POOL_DEFINE(name, minsz, maxsz, nmax, align) \
char __aligned(align) _mpool_buf_##name[_ALIGN4(maxsz * nmax) \
+ _MPOOL_BITS_SIZE(maxsz, minsz, nmax)]; \
The static pool allocation rounds up the product of maxsz and nmax not
size of individual blocks. If we have, say maxsz = 10 and nmax = 20,
the result of _ALIGN4(10 * 20) is 200. That's the offset at which the
free block bitmap will be located.
However, because z_sys_mem_pool_block_alloc() does this:
lsizes[0] = _ALIGN4(p->max_sz);
Individual level 0 blocks will have a size of 12 not 10. That means
the 17th block will extend up to offset 204, 18th block up to 216, 19th
block to 228, and 20th block to 240. So 4 out of the 20 blocks are
overflowing the static pool area and 3 of them are even located
completely outside of it.
In this example, we have only 20 blocks that can't be split so there is
no extra free block bitmap allocation beyond the bitmap embedded in the
sys_mem_pool_lvl structure. This means that memory corruption will
happen in whatever data is located alongside the _mpool_buf_##name
array. But even with, say, 40 blocks, or larger blocks, the extra bitmap
size would be small compared to the extent of the overflow, and it would
get corrupted too of course.
And the data corruption will happen even without allocating any memory
since z_sys_mem_pool_base_init() stores free_list pointer nodes into
those blocks, which in turn may get corrupted if that other data is
later modified instead.
Fixing this issue is simple: rounding on the static pool allocation is
"misparenthesized". Let's turn
_ALIGN4(maxsz * nmax)
into
_ALIGN4(maxsz) * nmax
But that's not sufficient.
In z_sys_mem_pool_base_init() we have:
size_t buflen = p->n_max * p->max_sz, sz = p->max_sz;
u32_t *bits = (u32_t *)((u8_t *)p->buf + buflen);
Considering the same parameters as above, here we're locating the extra
free block bitmap at offset `buflen` which is 20 * 10 = 200, again below
the reach of the last 4 memory blocks. If the number of blocks gets past
the size of the embedded bitmap, it will overlap memory blocks.
Also, the block_ptr() call used here to initialize the free block linked
list uses unrounded p->max_sz, meaning that it is initially not locating
dlist nodes within the same block boundaries as what is expected from
z_sys_mem_pool_block_alloc(). This opens the possibility for allocated
adjacent blocks to overwrite dlist nodes, leading to random crashes in
the future.
So a complete fix must round up p->max_sz here too.
Given that runtime usage of max_sz should always be rounded up, it is
then preferable to round it up once at compile time instead and avoid
further mistakes of that sort. The existing _ALIGN4() usage on p->max_sz
at run time are then redundant.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit aligns the programming of the privileged stack MPU
guard with that of the default stack guard (i.e of supervisor
threads). In particular:
- the guard is programmed BELOW the address indicated in
arch.priv_stack_start; it is, therefore, similar to the
default guard that is programmed BELOW stack_info.start.
An ASSERT is added to confirm that the guard is programmed
inside the thread privilege stack area.
- the stack fail check is updated accordningly
- arch.priv_stack_start is adjusted in arch_userspace_enter(),
to make sure we account for a (possible) guard requirement,
that is, if building with CONFIG_MPU_STACK_GUARD=y.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce linker symbols to hold the start and end address of
the memory area holding the thread privilege stack buffers,
applicable when building with support for User Mode.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The privilege stacks are not sandboxed inside an MPU region,
so they do not have to be aligned with the stack buffer size.
We fix this by using the PRIVILEGE_STACK_ALIGN macro, which
is defined in arch.h and reflects the minimum alignment
requirement for privilege stack buffers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For ARM architecture, use Z_THREAD_MIN_STACK_ALIGN to define
MEM_REGION_ALLOC in tests/kernel/mem_protect/mem_protect/.
STACK_ALIGN takes into account MPU stack guard alignment
requirements. However, application memory partitions do not
require MPU stack guards, therefore, the alignment requirements
are not applicable here.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a new define to describe the alignment for a
privilege stack buffer. This macro definition is used by the
privilege stack generation script, to determine the required
alignment of threads' privilege stacks when building with
support for user mode.
We cannot use Z_THREAD_MIN_STACK_ALIGN in this case, because
the privilege stacks do not need to respect the minimum MPU
region alignment requirement, unless, of course, this is
enforced via the MPU Stack Guard feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-organizes the macro definitions in arch.h for
the ARM architecture. In particular, the commit:
- defines the minimum alignment requirement for thread stacks,
that is, excluding alignment requirement for (possible)
MPU stack guards.
- defines convenience macros for the MPU stack guard align and
size for threads using the FP services under Shared registers
mode (CONFIG_FP_SHARING=y). For that, a hidden Kconfig option
is defined in arch/arm/core/cortex_m/mpu/Kconfig.
- enforces stack alignment with a wide MPU stack guard (128
bytes) under CONFIG_FP_SHARING=y for the ARMv7-M architecture,
which requires start address alignment with power-of-two and
region size.
The commit does not change the amount of stack that is reserved
with K_THREAD_STACK_DEFINE; it only determines the stack buffer
alignment as explained above.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These constants do not need global exposure, as they're only
referenced in the reboot API implementation. Also their names
are trimmed to fit into the X86-arch-specific namespace.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This appears to date all the way back to the initial import
and is used in exactly one place if DEBUG is on. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Previously the existing EFLAGS was used as a base which was
then manipulated accordingly. This is unnecessary as the bits
preserved contain no useful state related to the new thread.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
If immediate logging is disabled, then we must use log_strdup()
when printing log string allocated from stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Match what other drivers are doing and use the general BUS define.
Change DT_ST_LIS2DH_0_BUS_SPI to DT_ST_LIS2DH_BUS_SPI
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Definition of obsolete FLASH_PAGE_SIZE Kconfig symbol was
remaining in STM32F3 soc files.
Clean these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The defines related to IRQ priority don't exist and aren't used. So
just pass 0 to IRQ_CONNECT for the priority field.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
During conversion in #16815 a few device tree instance macro aliases
where missed (probably due to them existing to support future SoCs
and so not currently compiled), this fixes their usage.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
During conversion in #16937 a few IRQ macro aliases where missed
(probably due to lack of enabled test cases that compile them),
this fixes their usage.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
The defines in board.h aren't used/buildable so lets remove it. If
someone wants to support the button/led samples they can add DTS support
for those items.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Ctrl+N - moves in history to next entry
Ctrl+P - moves in history to previous entry
Behavior of those meta-keys is the same as in bash and emacs, which
makes Zephyr shell even more familiar to play with.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If the type of property is a 'array' we should generate defines as
if its a list even if theres only a single element in the list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix iterating past the response which causes an invalid memory to be
accessed and passed over to the callback as if there were more
attributes found.
Fixes#16602
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Log records may store either data or pointers to more records. In both
cases they must have the same size. With 64-bit pointers, the amount
of data that can occupy the same space as a pointer has to be adjusted.
And storage alignment has to accommodate actual pointers not u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Log arguments were hardcoded to u32_t values. On 64-bit systems, this
is rather restrictive. To make things clear, arguments now have their
own type, log_arg_t, which now can be adjusted in only one location
if need be. It is currently defined as unsigned long whose effective
width is equivalent to u32_t on 32-bit systems, and u64_t on 64-bit
systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
If the type of property is a 'string-list' we should generate defines as
if its a list even if theres only a single element in the list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We missed converting DT_OPENISA_RV32M1_LPTMR_SYSTEM_LPTMR_IRQ to
DT_OPENISA_RV32M1_LPTMR_SYSTEM_LPTMR_IRQ_0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We already have the info so let's show it. This helps spots intermittent
issues[*], gives an indication of the time --build-only saves, can help
spot an overloaded test system, highlights the most time-consuming tests
which may need a longer timeout in their config, shows the effective
timeout value when one occurs... all this for a dirt cheap screen estate
price and two extra lines of code.
Sample -v output:
32/81 board123 tests/testme PASSED (qemu 2.049s)
33/81 board456 samples/hello PASSED (build)
34/81 qemu_x3 tests/kernel.stack.usage FAILED: timeout (qemu 60.029s)
see: sanity-out/qemu_x3/tests/kernel.stack.usage/handler.log
35/81 board456 tests/testme PASSED (build)
36/81 qemu_x5 tests/kernel.queue FAILED: failed (qemu 2.191s)
see: sanity-out/qemu_x5/tests/kernel.queue/handler.log
[*] running qemu in heavily packed cloud virtual machines comes to mind,
also see #12553, #14173 etc.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Several bindings have an expectation of sub-nodes that describe the
actual infomation. The sub-nodes don't have any compatiable so we can't
key on that.
So we can add the concept of a sub-node to the YAML to handle cases like
'gpio-keys', 'gpio-leds', 'pwm-leds', etc..
The sub-node in the YAML is effective the "binding" params that describe
what properties should exist in the sub-node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The defines should have had a _0 on them, now that we generate the
proper defines, fixup the cases that used that old scheme.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The alias generation wasn't doing the right thing with regards to
keeping the names consistent. We would drop the index from the define
name for aliases.
So we'd get
DT_NXP_KINETIS_GPIO_GPIO_D_IRQ
which should be
DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a deprecate flag to add_prop_aliases so we can make the aliases it
generates as deprecated if needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The last FCB test to run (fcb_test_last_of_n) uses uninitialized
test_data[] and leaves behind a flash.bin with random content. Pick
another one (fcb_test_reset) that leaves a deterministic flash.bin
behind and run that last instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The binding specified 2 cells for an interrupt, but in reality we only
have an IRQ number. Remove the 'pri' cell from the binding to match
what the dts files are doing.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is no point allowing smaller alignments. And on 64-bit systems the
minimum becomes 8 rather than 4, so let's adjust things automatically.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The block alignment must be enforced for statically allocated slabs
as well as runtime initialized ones. It is best to implement this
check only once in create_free_list() which is invoked by both
k_mem_slab_init() and init_mem_slab_module(), where pointers are about
to be set for the first time. It is then unnecessary to perform this
test on every slab allocation as the alignment won't change at that
point.
And not only the block size needs to be aligned, but the buffer
as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Many things are currently aligned on 32-bit boundaries. On 64-bit
targets this should be 64-bit boundaries instead. Provide a pair of
macros, namely WB_UP() and WB_DN(), that do the right thing in both
cases.
The naming is short on purpose as this gets will be used within other
macro definitions, sometimes multiple times per line, and having a
longer name would make for excessively long lines.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
If user supplies AF_UNSPEC, we need to do two queries, one for
IPv4 A record and one for IPv6 AAAA record.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must query both IPv4 and IPv6 addresses if the hints parameter
is NULL i.e., user does not supply hints or if family is set to
AF_UNSPEC.
Fixes#16453
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Think I understand it now, and that was the goal.
- _extract_partition() adds index-based entries. extract_partition()
adds label-based entries.
Rename them to _add_partition_index_entries() and
_add_partition_label_entries(), and call them from a top-level
extract_partition() function.
This makes the logic clearer. It took me a long time to spot it.
- Generate indicies with a simple counter and remove the _flash_area
logic. This would break if partitions were extracted more than once,
but they aren't, and now you know that they can't be.
- Rename _create_legacy_label() to add_legacy_alias() and make it
global. It doesn't use 'self'.
- Break the logic for finding the flash controller into a separate
helper function
- Add doc-comments for the new functions
- Misc. other small clean-ups
generated_dts_board.conf and generated_dts_board_unfixed.h were verified
to be identical for disco_l475_iot1 and frdm_kw41z before and after the
cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Moved and renamed ull_entropy_get to lll_entropy_get, placed under
vendor specific ll_sw. This is needed for SW implemented entropy,
to allow vendor implementation of faster, less secure random number
generator for randomizing ADV timing.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The pinctrl property in the bindings is meaningless, lets remove it and
add a proper pinctrl property when we are ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ARCH_CHOICE symbol on the arch/Kconfig choice for Architecture
selection, allows for multiple definitions of the choice group which
makes it possible for out-of-tree architectures to add entries to the
list as needed.
For example, in $(ARCH_DIR)/$(ARCH)/Kconfig by adding something like;
choice ARCH_CHOICE
config xARCH
bool "xARCH architecture"
endchoice
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Zephyr has two unrelated build _VERSIONs: KERNEL_VERSION and
BUILD_VERSION. Prefix them slightly differently in BOOT_BANNER so anyone
can instantly zoom in on which one is being used without having to
compare the implementation details of both.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The way sanitycheck did its ordered regexes is that it would test
every regex against every line, and store the matching lines and their
regexes in an OrderedDict and check that they happened in the right
order.
That's wrong, because it disallows matching against a line that
previously appeared (and should have been ignored) in the input
stream. The watchdog sample is the best illustration: the first boot
will (by definition) contain all the output already, but the regex has
to match against a line from the SECOND boot and not the same one it
saw earlier.
Do this the simple way: keep a counter of which regex we're trying to
apply next and increment it on a match. This is faster too as we only
need to check one pattern per line.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This sample has to be operated manually (it's a USB DFU implementation
that needs to be plugged into a host to validate). Sanitycheck is
failing right now becuase it tries to flash and run it, and doesn't
see a harness declaration.
Set it to build_only when run under sanitycheck.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Right now this fails needlessly under sanitycheck for lack of a
harness declaration. It's short, just stuff in a simple regex check.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The regexes for the power states entered were in the wrong order, and
this tests takes 2 minutes to get to that point, blowing past the
default sanitycheck timeout.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is a case where using startswith to determine if a path is a
subdirectory of another path can erroneously match. When using a
testcase root outside of ZEPHYR_BASE, an erroneous match will cause the
relative path containing ".." to get prepended to the test output
directory.
Example:
$HOME/zephyr/zephyr # ZEPHYR_BASE
$HOME/zephyr/zephyr-rust/tests # testcase root
The relative path prepended to the testcase name is ../zephyr-rust/tests
and an example test output dir is
./sanity-out/qemu_x86/../zephyr-rust/tests/rust/rust.main
In this case, the build directory escapes the board directory and is no
longer unique. Parallel tests then clobber each other.
Use pathlib instead of string matching to cover this case.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
No-cache SRAM section is currently used for ARM-only builds
with support for no-cacheable memory sections (i.e.
CONFIG_ARCH_HAS_NOCACHE_MEMORY_SUPPORT) and it holds
uninitialized data. This commit properly defines the
corresponding linker section using SECTION_DATA_PROLOGUE
and GROUP_DATA_LINK_IN macros.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We would like to test the HW stack protection feature in ARM
builds with no user-mode support, i.e. CONFIG_USERSPACE=n. For
that we add a new test-case in tests/kernel/fatal test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This test case is so timing sensitive that gathering code
coverage data screws up the results.
Since this is an abnormal execution environment anyway,
just skip the assertions if CONFIG_COVERAGE=y.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We didn't have any coverage of the system call handlers for
k_wakeup() and k_is_preempt().
Increase RAM requirements due to stack alignment constraints
on MPU platforms when user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix how the tstacks array was declared extern so this
actually compiles on all platforms with user mode enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The start of generated/cfb_font_dice.h looked like this:
/*
* This file was automatically generated using the following command:
* /home/john/zephyrproject/zephyr/scripts/gen_cfb_font_header.py
* --input fonts/dice.png --output
* /home/john/tmp/build/zephyr/include/generated//cfb_font_dice.h
* --width 32 --height 32 --first 49 --last 54
*/
For build reproduction and "privacy" reasons, change it to this:
/*
* This file was automatically generated using the following command:
* ${ZEPHYR_BASE}/scripts/gen_cfb_font_header.py
* --input fonts/dice.png --output
* zephyr/include/generated//cfb_font_dice.h
* --width 32 --height 32 --first 49 --last 54
*/
Test with:
sanitycheck -p reel_board \
-T $ZEPHYR_BASE/samples/display/cfb_custom_font/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add __ASSERT() for coverity issue CID: 198874. Assert is used instead
of check since this is callback we get from stm32cube.
Fixes#16573
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When advertising with different identities we need to flag any
programmed RPA as invalid if it was generated using a different
identity.
Fixes#16893
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This array was created because more than 4 bytes were needed, however
now the minimum is 8 bytes, so we can use the net_buf user data
directly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Commit b65fe62719 updated the minimum
required net_buf user data to 8 bytes, so increase this define as
well. It has no other practical purpose except to trigger build
asserts if the user data is for some reason ever decreased below this
minimum.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some MPU systems require region power-of-two alignment
and can't automatically use remaining RAM for the newlib
heap. Set it for this case. Fixes this test on mps2_an385.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
pyocd 0.21.0 provides pack support 'pack support' functionality,
as opposed to current 'buitlin support'.
This new feature enables the possibility to add pyocd support
for any chip that is documented in Keil database. Then one doesn't
need anymore to wait pyocd is updated with a new target to use
pyocd with his target, as long as it is populated in Keil database.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The zephyr-file role creates a link to the GitHub copy of a file. Some
files have been moved so update the file references in the documentation
(found by scanning for uses of :zephyr-file:)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
split ext/hal/st into two modules:
- hal_stm32: For the code meant to run on STM32
- hal_st: For the code meant to drive ST components
Fixes#16316
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an option that only invokes the cmake phase of sanitycheck. This
can be useful for any testing that only needs to initial generation
phase of cmake, for example device tree. Also useful if we want to
just generate compile_commands.json files from cmake via:
./sanitycheck -xCMAKE_EXPORT_COMPILE_COMMANDS=1 --cmake-only
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This is done only for testing purposes, in real life the socket
would be closed if it is not used or needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
At the moment there is no real address for local CANBUS socket,
but we can still set protocol family of local socket to AF_CAN
so that for example net-shell "net conn" command can show
information about it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to dispatch the received CAN frame if there are multiple
sockets interested in the same CAN-IDs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The syscall handler for k_poll() returns error values
instead of killing the caller for various bad arguments,
cover these cases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If multithreading is disabled, thread_entry() never runs
since we cannot create threads; the non-multithreading case
was simply dead code.
Indicate to code coverage that CODE_UNREACHABLE should be
skipped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were never getting called anywhere from user mode,
except for k_queue_alloc_append(), but only by virtue of
some workqueue tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Threads that are sleeping forever may be woken up with
k_wakeup(), this shouldn't fail assertions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
LCOV/gcovr doesn't understand what CODE_UNREACHABLE means.
Adding LCOV_EXCL_LINE to the macro definition unfortunately
doesn't work.
Exclude a bit of code which spins endlessly when multi-
threading is disabled that runs after the coverage report
is dumped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't get any coverage past when we dump the coverage data,
so exclude the end of the function and move setting the main
thread as nonessential to immediately before the coverage dump.
The comment was also amended.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
data copying and bss zero are called from arch code
before z_cstart(), and coverage data gathering doesn't
work properly at that point. Not all arches use this
code anyway, some do it in optimized assembly instead.
Weak main() is also excluded; it does nothing and every
test overrides it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Addresses coverage gaps. Some changes were made so that exited
threads do not have k_thread_abort() called on them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Reversed revised ticker implementation pending new design which resolves
the issues described in GH issues #16830.
Signed-off-by: Morten Priess <mtpr@oticon.com>
stm32wb is not yet supported on openocd.
But support on pyocd can be enabled thanks to "pack" feature.
Configure board runner with pyocd and provide guidelines
to configure pyocd.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Swap_type field implementation is the new mcuboot's trailer field.
This patch makes using of it optional which keeps possibility of being
compatible with older versions of MCUBoot.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Mcuboot changed TLV in PR: Fix double swap on interrupted revert
(https://github.com/JuulLabs-OSS/mcuboot/pull/485)
Above bugfix changes a little way for upgrade request.
This path introduces re-formatted original mcuboot bootutil_misc.c
code as much as it was reasonable which includes the bugfix
adaptation and support for devices witch have bite erased sate different
than 1 as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
TEST configurations don't need to be warned that they're using test
techniques with some side-effects.
On a typical sanitycheck invocation, this warning is one of the only two
that appears in most test runs. In other words this commit gets rid of
half of the entire grep -ri '[[:blank:]]warn' noise that obscures any
work-in-progress warnings or platform specific warnings in the
logs (typically: device tree warnings).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add board suppor for 96Boards Meerkat96 board from Novtech based on
NXP i.MX7 multi core processor. Zephyr is ported to run on the single
core Cortex-M co-processor on this board.
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/imx7-96/
By default Zephyr console output is available via UART1 available at
the 40pin LS connector.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Even one-liner statement if () need { }
- you can coalesce assignment and condition if the later tests the
earlier only.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As title says, struct wdt_config and enum wdt_clock_timeout_cycles are
not used anymore so they can be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As seen previously, some toolchain are willing to insert padding
at section changes to apply greater alignments by default. This is
especially true with 64-bit builds. USB structures are marked with the
packed attribute and therefore the linker section they land into
must also be byte aligned.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit updates counter Kconfig to use logger template to define
COUNTER_LOG_LEVEL option.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added support for the STM32L496XE series with 512KB internal flash and
256KB SRAM of contiguous addresses.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
stm32l496zg_disco and nucleo_l496zg were depending on STM32L496XG SOC.
With the recent change to STM32L496XX, the dependency should be updated.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Create source directory for IA32-subarch specific files, and move
qualifying files to that subdirectory.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Parameter of set_interface_status is no more the interface index
but a pointer to interface descriptor.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Prevent to reschedule a transfer if one is already ongoing (occupied).
This happens with USB class drivers scheduling transfer once interface
is enabled (netusb, ACM...) and cause freeze due to infinite loop in
low level driver.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
According to datasheet, there needs to be a minimum of 488µs
between each write to Enable register
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
In commit 28a5657f1f we stopped ZEPHYR_BASE from leaking into
__FILE__ and other macros. This works great for apps inside ZEPHYR_BASE
but does nothing for apps outside ZEPHYR_BASE.
-fmacro-prefix-map=${CMAKE_SOURCE_DIR}=CMAKE_SOURCE_DIR does it.
To avoid collisions and for consistency change:
-fmacro-prefix-map=${ZEPHYR_BASE}=.
to:
-fmacro-prefix-map=${ZEPHYR_BASE}=ZEPHYR_BASE
Quickest test/demo:
- Copy samples/hello_word/ to ~/home_world/
- Add "%s", __FILE__ to printf in ~/home_world/src/main.c
cmake -B build -S ~/home_world/ -DBOARD=qemu_x86
make -C build run
Before:
~/home_world/src/main.c says Hello World! qemu_x86
After:
CMAKE_SOURCE_DIR/src/main.c says Hello World! qemu_x86
objdump -h $(find build -name *.c.obj) | grep noinit
9 .noinit."ZEPHYR_BASE/kernel/system_work_q.c".0 0000
17 .noinit."ZEPHYR_BASE/kernel/init.c".2 00000100 000
18 .noinit."ZEPHYR_BASE/kernel/init.c".1 00000400 000
19 .noinit."ZEPHYR_BASE/kernel/init.c".3 00000800 000
16 .noinit."ZEPHYR_BASE/kernel/mailbox.c".2 00000348
18 .noinit."ZEPHYR_BASE/kernel/mailbox.c".1 00000028
20 .noinit."ZEPHYR_BASE/kernel/pipes.c".2 00000280 00
22 .noinit."ZEPHYR_BASE/kernel/pipes.c".1 00000028 00
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The different linker steps are all hardcoded to the output filename
"zephyr.map" and only the last one survives.
Un-harcode.
This removes some confusion when trying to follow who builds
what/when/how and it stops destroying intermediate linking information
useful when tracing/debugging new features or issues in the build.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This allows for printing long long values. Because the code size
increase may be significant, this is made optional on 32-bit targets.
On 64-bit targets this doesn't change the code much as longs and
long longs are the same size so it is always enabled in that case.
The test on MAXFLD has to be adjusted accordingly. Yet, its minimum
value wasn't large enough to store a full-scale octal value, so this
is fixed as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
On 64-bit systems the most notable difference is due to longs and
pointers being 64-bit wide. Therefore there must be a distinction
between ints and longs. Similar to the prf.c case, this patch properly
implements the h, hh, l, ll and z length modifiers as well as some small
cleanups.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit adds a test in tests/kernel/fatal test-suite, which checks
that the HW stack overflow detection works as expected during a user
thread system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In order to expose west to the majority of users, default to 'all'
instead of 'cmake' in the 'tool' option. This means that, unless
otherwise specified, build instructions will be generated for both west
and cmake by default.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to simplify the current implementation and to prepare for a
change where we default to west as the standard build tool, partially
refactor the generation of cmake-based build instructions:
- Introduce `cd-into` as boolean flag that controls whether build
instructions are generated from the current working directory or from
inside the actual app folder. In the case of cmake, this includes
changing into the build folder to run ninja or make.
- Default to building from the current working directory, in the case of
cmake using the `-B` flag to create the build folder.
- Remove the usage of ZEPHYR_BASE with the `zephyr-app` option.
The option itslef is kept fsince it has semantic value, and a comment is
added when used.
- Consolidate the _generate_make and _generate_ninja functions into a
common code block inside _generate_cmake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove unused definition of MEMDOMAIN_ALIGN_SIZE macro
from include/app_memory/app_memdomain.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARM architecture z_priv_stack_find() returns the start of a
thread's privilege stack; we do not need to subtract the length
of a (possible) stack guard. This commit corrects the assigning
of the start address of a thread privilege stack in
test/kerne/mem_protect/mem_protect/userspace.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Clarify the last matching rule, as it is not too intuitive
(developers may have expected that all matching regexes would
be added as code owners)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix pending Tx control buffer leak on supervision timeout.
Queued tx buffers in LLL consists of both data and control
PDUs but only data buffers got correctly released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add self.require() checks before running commands. Increase test
coverage, including for this feature, while we are here.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The runners/jlink.py script has a mechanism for erroring out if a host
tool is not installed. Abstract it into runners/core.py and handle it
from run_common.py. This will let it be used in more places.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This makes it safe to allocate buffer from the TX callback by freeing
the context before calling the callback which should wake up the TX
thread had it be pending on add_pending_tx.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some files cleanup was overlooked when STM32 clock_control
was re-factored in #16486.
Fix this by removing the now superfluous files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
stm32mp1 was adding a STM32 specific Core selection Kconfig
symbol while zephyr generic CPU_CORTEX_M4 could be used for the
same purpose.
Remove STM32 specific symbol and use generic one.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Get spi hci driver to define its own rx thread, in order
not to mix with bt own RX thread as driver use bt_recv_prio
that expect to be used in a different thread than BT host one.
Fixes#15714
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add new option --report-excluded to list all those tests with bad
filtering that never build or run. This option produces accurate results
with --all but can be used with default sanitycheck options to see what
does not run/build in CI for example. (limited coverage).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Check the CONFIG_BUILD_OUTPUT_HEX and CONFIG_BUILD_OUTPUT_BIN options
are enabled before attempting to build signed versions of these formats.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add more error handling and warnings. Doing this nicely requires a bit
of re-work to the control flow.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
When signing binaries from multiple build directories, it is
inconvenient to have to specify the output file locations by hand each
time. It's also a little weird that they're not next to zephyr.bin and
zephyr.hex.
Move them to the build directory, next to their unsigned variants.
Suggested by Piotr Mienkowski.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Let's leave self.args as the actual parsed argument namespace.
Pass the final computed build directory separately.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This got broken in the patches which added the build.dir-fmt config
option when BUiLD_DIR_DESCRIPTION was renamed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Clean up the code a bit:
- Simplify the loops over the flash 'reg' properties by using range()
- Build identifier names with a plain .format() where possible. This
makes them stand out better in the code.
- Remove redundant variables
- Move variables close to where they're used
- Misc. other minor improvements
generated_dts_board.conf and generated_dts_board_unfixed.h were verified
to be identical for disco_l475_iot1 and frdm_kw41z before and after the
cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* Fix white space in phy.yaml
* Fix property name in st,stm32-usbphyc.yaml and usb-nop-xceiv.yaml to
use "#phy-cells" and not "phy-cells"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce uint8-array type for local-mac-address as we need to
distinguish it from 'array' meaning a uint32 array.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
DT_ALIAS_<ALIAS>_<PROP> defines are a convenient and portable way to get
the device instance name despite different naming conventions used by
the device drivers.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The driver was using a mix of instance defines and alias, move to just
using the alias defines so its consistent.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This API had several issues:
- The parameter types and order were inconsistent with e.g.
bt_le_adv_start()
- There were no real users of num_params, which just caused increased
code size and memory consumption for no good reason.
- The error handling policy was arbitrary: if one of the
notifications would fail it would be impossible for the caller to
know if some notifications succeeded, i.e. at what point the
failure happened. Some callers might also want to make note of the
failure but continue trying to notify for the remaining parameters.
The first issue is easily fixable, but because of the other two I
think it's best we don't have this code as part of the stack, rather
require whoever needs it to do the for loop themselves. It's just a
few lines of code, so the benefit of having this in the stack was
anyway quite minimal.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* Rename stringlist to string-array to be closer inline with upstream
dtschema definitions.
* Add string-array to the device_node.yaml.template
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This option uses a lot of typing, so point out there's a way to save
keystrokes using -C.
Tweak the language around the target toolchain.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Make it clearer that the note about setting QEMU_BIN_PATH only applies
if you've got the Zephyr SDK installed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
There are a few different places where alternatives for setting
environment variables are described. None of them is 100% complete, so
the results are likely to be confusing.
Make a single page on setting environment variables, how the zephyrrc
files work, how the zephyr-env scripts work, and some of the important
environment variables, with appropriate references elsewhere. (This is
inspired by the Arch wiki's excellent page on installing programs.)
Link to it from the getting started and application development pages
instead of repeating the information. This has the benefit of
shortening the getting started guide a bit more.
Add some concrete advice on checking the toolchain environment
variables in particular. This is a stumbling block for beginners.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Updates based on discussion and changes in supported features.
- Make the guide shorter by removing content that's not relevant to
most users who are truly just getting started, such as information
about pre-LTS versions that did not support west, and by being more
concise in some places.
- Decrease the number of colored boxes. At the latest TSC F2F, the
"note / warning / note / tip" contents were identified as a
readability problem.
- Add additional information based on new west features, like "west
boards".
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
We not analysing coverage data at all in CI right now. Disable this
while we figure out a better solution for reporting data.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Its possible that the <INSTANCE> number could conflict with the register
number. This is shown to happen for a device like soc-nv-flash at
address 0.
So change naming convention to DT_INST_<INSTANCE>_<COMPAT>_<PROP> and
make DT_<COMPAT>_<INSTANCE>_<PROP> as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
k_sem_give shall only be used if no callback has been set otherwise
k_sem_take was not called which can break the flow control.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The only we support cores that don't have CMOV insns are the MINUTEIAs,
so we simply check for that rather this using a layer of indirection.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This option is set iff CONFIG_X86 is set, thus it provides no useful
information. Remove the option and replace references with CONFIG_X86.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Sample was not compiling for nordic boards because RTC_0
instance was not enabled by default and RTC_0 device is using
different DT define.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Detection of missing log_strdup call was applied to every message
while it applies only to standard messages (string + arguments).
Appling it to hexdump messages could lead to fault as seen on
nrf9160_pca10090ns board.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The macro obtains the toolchain specific flag and value for
setting of the requested c standard.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Initialize the net_pkt cursor to begining after net_pkt_write.
Without which recv_cb can't peek/get net_pkt
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
We need to be able to force certain versions based on the branch and
code base being used. For example for 1.14 we will need to apply some
fixes or revert some commits that may only apply to master.
Next step is also adding this to 1.14 branch and use a working commit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To avoid and minimize conflicts when items are always added to the
bottom of the list, order things alphabetically.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup references to boards in some of the example and use the same
boards through the examples. Other minot cleanups and make the text more
generic and not specific to certain boards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On 64-bit systems the most notable difference is due to longs and
pointers being 64-bit wide. Therefore there must be a distinction
between ints and longs.
This patch:
- Make support functions take a long rather than an int as this can
carry both longs and ints just fine.
- Use unsigned values in _to_x() to cover the full unsigned range
and avoid sign-extending big values. Negative values are already
converted to unsigned after printing the minus sign. This also makes
division and modulus operations slightly faster.
- Remove excessive casts around va_arg() and use proper types with it.
- Implement the l and z length modifiers as they're significant on
64-bit targets. While at it, throw in the z modifier as well.
Since they all come down to 32-bit values on 32-bit targets, the
added code should get optimized away as duplicate by the compiler
in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Because of how generate defines for instances its possible that we have
a name conflict if the instance ID and reg addr space clash.
For example on qemu_x86 there are current two 'soc-nv-flash' nodes and
one is at reg addr 0, but instance id 1, the other is reg addr 0x1000
and instance id 0. We'd possibly get this conflict:
For the 'soc-nv-flash' at 0x1000 (instance 0):
(instance define)
#define DT_SOC_NV_FLASH_0_BASE_ADDRESS 0x1000
For the 'soc-nv-flash' at 0x0 (instance 1):
(address define)
#define DT_SOC_NV_FLASH_0_BASE_ADDRESS 0x0
To deal with this we make sure that the lower reg address is instance 0,
than things work out ok. To handle this case, if we sort the instance
IDs based on reg addr than if we have something at reg addr 0, it will
also than be an instand ID 0.
The longer term solution will be to deprecated the old defines and
remove the conflict between instance ID defines and normal DT defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The neighbor cache did not contain link address type. This is not
causing problems atm but good to fix anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port the implementation that performed random backoff of
forced slave event scheduling.
When peer master implementation skips events, multiple
local overlapping slaves will randomize their forced
scheduling to break out of a round robin pattern increasing
the chance of synchronizing with their masters again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Final step of linker abstraction:
* Abstract zephyr_lnk by including it in toolchain_ld_link_elf.
* Abstract relevant uses of target_link_libraries.
* Introduce toolchain_ld_force_undefined_symbols.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
For the request:
DCID shall map to rx.cid:
'This field specifies the endpoint of the channel to be disconnected
on the device receiving this request.'
SCID shall map to tx.cid:
'This field specifies the endpoint of the channel to be disconnected
on the device sending this request.'
For the response when receiving the roles are inverted.
Fixes#16799
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The macro is intended to abstract the -fno-common compiler option
which controls the placement of uninitialized global variables. The
macro leaves it up to the toolchain to define the option.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Fix scan requests being processed during directed advertisiments.
Directed advertise packets are not scannable
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
It is possible that iface is NULL when selecting IPv4 destination
address for a sent packet.
Coverity-CID: 198877
Fixes#16570
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds number of matches as optional parameter to gatt show-db:
> gatt show-db 2803 1
attr 0x005065f0 handle 0x0002 uuid 2803 perm 0x01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Number of matches was not being properly handled causing the callback to
be called more than specified by the caller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit rewrites the documentation section describing
the Shared FP registers mode for Cortex-M to align with the
latest architecture rework of Shared FP mode.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We can now invoke k_float_disable(.) for ARM platforms,
too, since we introduced the function as a cross-arch
system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the architecture-specific implementation
of k_float_disable() for ARM and x86.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Support for Floating Point (both un-sharing and sharing
registers mode) is currently implemented for ARM and X86
architectures, so reflect this in the Kconfig symbol
definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce k_float_disable() system call, to allow threads to
disable floating point context preservation. The system call is
to be used in FP Sharing Registers mode (CONFIG_FP_SHARING=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building without support for user mode (CONFIG_USERSPACE=n)
we need to correct the starting address of the MPU Guard, before
passing it to the function that evaluates whether a stack
corruption has occurred. The bug was introduced by commit
(60bae5de38) in
PR-13619, where the start address of the MPU guard was properly
corrected, but the guard start at the corresponding stack-fail
check was not adjusted accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The INT_TO_POINTER and POINTER_TO_INT macros must accommodate larger
pointers on 64-bit systems that don't fit into an int.
In the INT_TO_POINTER case, we have to use an extra cast to intptr_t
as an intermediate widening type to avoid complaints from the compiler
when converting from an int.
This change makes no difference on 32-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Since the bt_mesh_msg_ctx struct no longer has a size that is a
multiple of 2, the bitfields might as well be made to normal types
as this will minimize the code generated to access them.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
By moving the rssi value from the bt_mesh_net_rx struct to the
bt_mesh_msg_ctx struct, it will be available to applications via
the mesh op callbacks.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
The macro is intended to abstract the -imacros compiler option for
inclusion of the autoconf.h header file. The abstraction allows for a
given toolchain to decide how the inclusion of the header file is to
be done.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The query->len does not take 'Terminator' into account, shift over
one byte to prevent overwriting it with next field (Type).
This fixes mdns_resolver sample.
Fixes: 87eb552dd2 (net/dns: Switch mdns responder to new net_pkt API)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The attribute handle used to read next attribute has to be incremented
to not loop reading the same attribute.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When trying to establish friendship the Friend must respond to the
initial Friend Poll with a Friend Update. If this initial Friend Update
response is not received the Friendship establishment process must start
again.
When starting a second Friendship establishment processes the `sent_req`
field of the `lpn` struct was left set to `TRANS_CTL_OP_FRIEND_POLL`.
This prevented the initial Friend Poll being sent out on the second
attempt. Since the Friend Poll was not sent, no timeout is set and
nothing happens ever again. No more Friendship Requests are sent.
This commit clears `sent_req` back to zero when no Friend Update
response has been received after the initial Friend Poll.
Fixes#16678
Signed-off-by: Rich Barlow <rich@bennellick.com>
Add some missing fatal asserts that need to be caught to
avoid unexpected failures in the implementation of the
architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The macro is intended to abstract the -ffreestanding compiler option
which tells the compiler that this is a bare metal env. The option is
compiler and thus toolchain specific, but this macro leaves it up to
the toolchain to decide the value of the option.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Structures to which this applies contain pointers. So the alignment
should depend on pointer width. On 32-bit builds this remains the same.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Place audio buffers in LPSRAM using linker section attribute
for the 2-way audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Place audio buffers in LPSRAM using linker section attribute
for the I2S audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Place audio buffers in LPSRAM using linker section attribute
for the digital mic audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Add dts fixup definitions for low power sram base address and size
- DT_LP_SRAM_BASE
- DT_LP_SRAM_SIZE
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
cmake has a number of issues dealing with symbolic links:
https://gitlab.kitware.com/cmake/cmake/issues/16228
One of them can cause cmake to rewrite the -S input from the user and
CMAKE_SOURCE_DIR to unexpectedly include symbolic links:
https://cmake.org/pipermail/cmake/2019-May/thread.html#69496
Catch this corner case and warn about subtle issues like breaking
-fmacro-prefix-map=${ZEPHYR_BASE}=
Sample warning message:
CMake Warning at ../../CMakeLists.txt:30 (message):
ZEPHYR_BASE doesn't match CMAKE_CURRENT_SOURCE_DIR
ZEPHYR_BASE = ~/zephyrproject/zephyr
PWD = ~/westsymlink/zephyr/samples/hello_world
CMAKE_CURRENT_SOURCE_DIR = ~/westsymlink/zephyr
You may be using a mix of symbolic links and real paths which causes
subtle and hard to debug CMake issues.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Some code in stm32 exti driver was considering exti lines number
for which no IRQ_CONNECT was available. To be clear, this code
was not functional and since no one complained it was not used.
Besides, code to take into account these "high" irq lines was
complex hard to read and review.
Simplify state of things by removing completely this part of code.
It could be put back again piece by piece when required.
This change allows to get rid of EXTI_LINES definition.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Function stm32_exti_enable is complex and makes it hard to extend
to new stm32 series.
When MP1 support was added, table exti_irq_table was introduced
to simplify stm32_exti_enable function.
This change extends usage of this table to other series, without
adding or removing any functionality.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Minimum block size is 2x larger on 64-bit systems, so let's simply
double all size params. This won't change the validity of those tests
on 32-bit systems. Alignment tests are also adjusted for wider pointers.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
TI_HDC Driver now also supports waiting for conversion to finish instead
of waiting for GPIO interrupt.
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Hdc1008 driver is renamed into ti_hdc to prepare it to support all
available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080).
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Although unlikely it is possible that a remote may attempt to send just
1 byte as the write request allows to do that:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F
page 2320:
'If the attribute value has a fixed length and the Attribute Value
parameter length is less than or equal to the length of the attribute
value, the octets of the attribute value parameter length shall be
written; all other octets in this attribute value shall be
unchanged.'
Fixes#16734
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can't possibly have worked since the initial merge of the board.
It looks like it was originally written as a port from a KBuild
Makefile fragment but never tested, and has only been touched by
tree-wide changes since then. Try to fix it.
I don't have this hardware, but it should work the same way as
96b_nitrogen if it truly supports pyocd.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Fix the tx_ack mfifo count to accomodate both data and
control PDUs being acknowledged.
With out this fix, pending maximum number of data plus
control PDUs in LLL on supervision timeout asserted due to
tx_ack mfifo overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the master clock drift.
Relates to #11764.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added an internal ull_update_mark function to detect race
conditions while stopping ticker instances during slave
drift, disconnection and connection update.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds counter driver based on RTCC module for SiLabs Gecko
SoCs.
Tested with SLWSTK6061A / BRD4250B wireless starter kit.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Enable generation of doxygen documentation for kernel APIs that are
behind Kconfig options and add a note about the option needed to enable
the APIs.
Enable both CONFIG_SCHED_CPU_MASK and CONFIG_SCHED_DEADLINE in doxygen
config file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the west flash/debug commands, if the user gives an invalid build
directory, they'll get a stack trace instead of a helpful error
message when the cache can't be built.
Fix that.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Doxygen comments can include doxygen-specific markup tags. If other
markup tags are used (e.g., restructuredText) we need to indicate that
in the doxygen comments (via @rststar/@endrststar tags).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add the possibility of configuring the build folder format in west's
configuration system.
The build.dir-fmt configuration option controls how west will create
build folders when not specified, the following parameters are currently
accepted:
- board: The board name
- source_dir: The relative path from CWD to the source directory
- app: The name of the source directory
If CWD is below source_dir in the directory hierarchy then source_dir is
set to an empty string.
This means that if one sets:
[build]
dir-fmt = build/{board}/{source_dir}
Then when building samples/hello_world from zephyr's root for the
reel_board the build folder will be:
./build/reel_board/samples/hello_world
but when building it from inside the samples/hello_world folder it will
instead be:
./build/reel_board
Fixes https://github.com/zephyrproject-rtos/west/issues/124
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
In preparation for upcoming changes to the way the default build folder
is defined, switch to using the common find_build_dir() function in the
runners.
This actually changes the behavior for the west build command slightly,
since the current working directory (cwd) will now be checked after the
default build folder ('build'). This brings it in line with what is
used for the runners.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move common properties like 'compatible', 'reg', 'reg-names',
'interrupts', 'interrupt-names', and 'label' into one common base.yaml
that all the other yaml's can inherit from. This removes both
duplication and inconsistent definition.
The device specific yamls just need to say if a property is 'required'
or not.
NOTE: due to some generation conflicts we did not covert
'soc-nv-flash.yaml' to use base.yaml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Due to driver refactoring there is no more match to *stm32f4*.
Also, it seems that @rsalveti and @idlethread are not more
actively contributing to zephyr, so this change should not be
a concern.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order ease readability of Kconfig.stm32 file, split series
specific PLL configuration options into series specifc Kconfig
files.
This being done, we have now a similar pattern for series specific
code and series specific Kconfig files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
RCC device could be common to various STM32 series.
Until now, PLL handling code was set in series specific files,
even if it was driving the same device than another series.
Minimize code duplication by factorizing code between series
when possible.
With this change, some series get additional features by getting
access to code developed for other series.
Additionally, while renaming the files, remove the non informative
'x' to minimize file name length
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This trivial patch extends the PCIe shell to check for and report
on a device's ability to use MSI-X interrupt signaling.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We are not interested in whether the close() call succeeds or
not when the connection is terminated.
Coverity-CID: 198878
Fixes#16569
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When CONFIG_X2APIC is enabled, twiddle the appropriate MSR during
initialization to enable x2APIC mode.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
More clearly differentiate MVIC vs. APIC timer code, and use new APIC
accessors in include/drivers/loapic.h. Remove extraneous comments, and
other light cleanup work.
This driver is in need of a serious overhaul -- despite appearing to
have support for TICKLESS_KERNEL and DEVICE_POWER_MANAGEMENT, bitrot
has taken its toll and the driver will not build with these enabled.
These should be removed or made to work... but not in this patch.
Old x2APIC-related accessors in kernel_arch_func.h are eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use new x2APIC-aware accessor functions in loapic.h instead of
locally-defined ones. Remove bitrot #defines (no longer used)
and extraneous comments with information from old data sheets.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
MSRs related to x2APIC will never be accessed directly by name, but
rather via an offset from a base MSR, so the definitions are removed
from msr.h.
New local APIC accessor functions, which are sensitive to xAPIC vs
x2APIC mode (CONFIG_X2APIC), are added to include/drivers/loapic.h.
These accessors use the MSR definitions as modified above.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple renaming and Kconfig reorganization. Choice of local APIC
access method isn't specific to the Jailhouse hypervisor.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The real-mode startup code is trivially changed to refer to MSR
definitions in include/arch/x86/msr.h, rather than its ad-hoc ones.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Light reorganization. All MSR definitions and manipulation functions
are consolidated into one header. The names are changed to use an
X86_* prefix instead of IA32_* which is misleading/incorrect.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
drivers/interrupt_controller/i8259.c is not a driver; it exists
solely to disable the i8259s when the configuration calls for it.
The six-byte sequence to mask the controllers is moved to crt0.S
and the pseudo-driver is removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
It is possible that UDP header cannot be accessed so we need
to check that we do not do null pointer dereference.
Coverity-CID: 198866
Fixes#16581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is the generic symbol to select or otherwise test for when 64-bit
compilation is desired. Two trivial usages of this symbol are also
included.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This had numerous problems, but should now be working
end-to-end and produce correct reports with gcovr 4.1.
Use of sanitycheck is now much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This tool is cited in our documentation for producing coverage
reports, add it to the list of packages pulled in by pip during
workstation setup.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Casting a pointer to an int produces warnings with 64-bit targets.
Furthermore, an int is not always the optimal memory element that
can be copied in that case.
Let's use uintptr_t to cast pointers to integers for alignment
determination purposes, and mem_word_t to denote the optimal memory
"word" that can be copied on the platform.
The mem_word_t definition is equivalent to uintptr_t by default.
However, some 32-bit targets such as ARM platforms with the LDRD/STRD
instructions could benefit from word_t being an uint64_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support for reading the onboard potentiometer (ADC0 channel
12) and thermistor (ADC0 channels 0 and 1).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
We've never propertly generated any pinmux info, so remove generation
from the binding yaml files for pinmux properties.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
load_config() and write_config() now return a message to print. This
message also says whether the configuration was loaded (replace=True) or
merged (replace=False), and whether the new .config is different from
the old (for write_config()).
Print the returned messages and remove some old print()s.
Also switch to an improved warning control API (the old one is still
supported, but might as well).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A recent Kconfiglib change turns
config A
bool
prompt "foo" if C && D
default A if B && C && D
depends on C && D
into
config A
bool "foo"
default A if B
depends on C && D
Where e.g. D might be from a surrounding menu/if.
Update the note at the end of symbol pages to clarify that only the
'depends on' includes propagated dependencies.
Piggyback some minor cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update kconfiglib, menuconfig, and guiconfig to upstream revision
5c904f4549 to get various improvements and fixes in:
- Marc Herbert found an issue involving symlinks, absolute paths,
and rsource that could lead to files not being found. The root cause
was relpath() assuming that symlink/../bar is the same as bar/, which
isn't guaranteed.
Fix it by handling paths in a simpler, more textual way.
- Propagated dependencies from 'depends on' are now stripped from
properties when symbols are printed (e.g. in information dialogs and
generated documentation).
The printed representation now also uses shorthands.
Before:
config A
bool
prompt "foo" if C && D
default A if B && C && D
depends on C && D
After:
config A
bool "foo"
default A if B
depends on C && D
- Before writing a configuration file or header, Kconfiglib now
compares the previous contents of the file against the new contents,
and skips the write if there's no change. This avoids updating the
modification time, and can save work.
A message like "No change to '.config'" is shown when there's no
change.
- .config now has '# end of <menu>' comments to make it easier to see
where a menu ends. This was taken from a change to the C tools.
- load_config() and write_(min_)config() now return a message that can
be printed with print(kconf.load_config()). This allows messages to
be reused in e.g. the configuration interfaces (nice now that there's
also a "No change to..." string).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If argument for log_strdup is from ro memory then there is
no point to duplicate it. This may happen if function logs
variables coming from outside, e.g. function argument.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Issue was caused by pointer arithmetic.
This commit cast pointer of struct data to u8_t pointer
and makes arithmetic explicitly by adding the exact value.
fixes#16572
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Convert all board_set_xxer(foo) calls to board_set_xxer_ifndef(foo),
which allows the user to make their own decision at CMake time.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This helps by letting us add checks for when the runner has already
been set. There is documentation saying you can set
-DBOARD_DEBUG_RUNNER at the command line and have it take effect,
which turns out not to be true for a large number of boards.
A status message helps the user debug.
(We'll address the existing in-tree boards in the next patch.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Change removes tracing hooks before threads are initialized
and thread switched out hook for ARM before first time switching
to main thread.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The structure of the va_list type is architecture-dependent, and it
doesn't seem possible to initialize va_list variables in a portable way
(except by using va_start()). In particular, the x86_64 ABI defines the
type like this:
typedef struct {
unsigned int gp_offset;
unsigned int fp_offset;
void *overflow_arg_area;
void *reg_save_area;
} va_list[1];
Fortunately, the va_start() macro expects an uninitialized va_list
variable, so we can simply remove the initializers to make the code
portable.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
This adds code to each page needed for gathering google analytics
tracking data to the LF-provided Global site tag.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Given that the section name and boundary simbols can be inferred from
the struct object name, it makes sense to create an iterator that
abstracts away the access details and reduce the possibility for
mistakes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This convenience macro wraps Z_DECL_ALIGN() and __in_section() to
simplify static definitions of structure instances gathered in dedicated
sections. Most of the time those go together, and the section name is
already closely related to the struct type, so abstracting things behind
a simpler interface reduces probability of mistakes and makes the code
clearer. A few input section names have been adjusted accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The alignment fix on struct device definitions should be done to all
such linker list tricks. Let's abstract the declaration plus alignment
with a macro and apply it to all concerned cases.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The DEVICE_DEFINE() macro creates instances of struct device that are
gathered into a contiguous list by the linker. However, some assemblers
pad sections to the next 16-byte boundary or so by default, screwing up
the list walk in z_sys_device_do_config_level(). This is especially
true for 64-bit compilation where sizeof(struct device) isn't a
multiple of 16.
Enforcing an alignment at the linker level would solve this issue when
instances of struct device are gathered from different object files.
However it doesn't solve it when multiple instances are created within
the same object file where the first instance still has a gap with the
next instance, as the assembler does add padding upon section switch
even though the object file ends up with a single section with both
instances. In that case the linker would get rid of the trailing padding
only, leaving the inner gaps between instances in place.
The actual fix is to provide an explicit alignment attribute to the
section for every instances, using __alignof(struct device) which is
the alignment expected by the compiler for that structure.
This also means that the x86_64 workaround in the struct device
definition may go as the "edge case" it refers to is now properly
handled.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
ARC EM4 is just a baseline configuration of ARC EM family of CPU cores.
But with addition of more featuers like caches, DSP extensions etc
we're effectively getting EM6, EM5D etc templates.
So to not confuse users let's talk about families of ARC cores
as that's what makes sense together with extra features but not
templates itself.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Instead of blind copy of nsim_em.dts re-structure this way:
* nsim.dtsi - Top-level "board" description re-usable for
| all nSIM-based "boards".
|
| Even though it's not needed right now but it
| allows to add other ARC core families in the future.
|
\_ nsim_em.dtsi - Common definitions for boards with ARC EM cores
|
\_ Real boards with ARC EM cores
|
\ nsim_em.dts
\ nsim_sem.dts
\ nsim_em_mpu_stack_guard.dts
\ nsim_sem_mpu_stack_guard.dts
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This will allow us to easily specify other CPUs looking
forward and not rely on any default value.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
ARC nSIM simulates all flavors or ARC cores so there's
no point in limiting its usage to ARC EM family only.
Moreover with upcoming addition of ARC HS family support
in Zephyr we'll be re-using nSIM "board" for them as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
A basic display driver is added for a generic 32-bpp framebuffer.
Glue logic is added to the x86 arch to request the intitialization
of a linear framebuffer by the Multiboot loader (GRUB) and connect
it to this generic driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When booting using GRUB, some useful information about the environment
is given to us via a boot information structure. We've not made any
use of this information so far, but the x86 framebuffer driver will.
A skeletal definition of the structure is given, and provisions are
made to preserve its contents at boot if the configuration requires it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Builds with coverage enabled are in a continuous state
of bit-rot as no CI job enables it. Introduce a dedicated
x86 target that builds with coverage enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test is already flaky, but becomes even flakier when
coverage is enabled.
Disable until we put a stake through the QEMU timing issues
being worked on in #14173.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On some systems the sample was failing validation because
the coverage data would be emitted before the sample had
a chance to print anything else.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We added generation of aliases for "alt-label" (which was the outer
label of a node) for use with shields and connectors. However we've
never used these defines and the generation is a bit inconsistent.
This removes generation of defines like for label 'arduino_spi':
#define ARDUINO_SPI_BASE_ADDRESS ... (already deprecated)
#define DT_ST_STM32_SPI_FIFO_ARDUINO_SPI_BASE_ADDRESS ...
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test_timer_periodicity waits for first timer expiration
in order to extract timer firing time. The wait is performed
using k_timer_status_sync() API call, which blocks thread
until timer expiration. However if the timer expired before
call the this function, it will return immediately, triggering
test failure.
This commit adds the second call to the k_timer_status_sync()
to ensure that the following part of the test will be executed
as soon as possible after timer expiration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With pull request #16208 and #16404 hooks for calling user defined
code was implemented. These user extensions are gated by a number of
Kconfigs. The test in this pull request tests that code compiles when
these Kconfigs are enabled.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
When reading attributes from static services their handles will not be
set and must be resolved at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The file descriptor was not closed after the test which caused
Coverity to complain about resource leak.
Coverity-CID: 198640
Fixes#16493
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port the fix for the controller implementation to make start
encryption queueable if there is any control procedure in
progress.
Refer to #15335.
Relates to #15335, #15186, #15958 and #14636.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This name collides with one in the bt subsystem, and wasn't named in
proper zephyrese anyway.
Fixes#16604
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix disconnect command optional argument count to permit the
supply of Bluetooth Address so as to be able to cancel a
pending central initiated connection creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix gatt indicate when conn is NULL and called with characteristic
declaration as the attribute argument. In this case the handle was not
advanced to the characteristic value. This is inconsistent with the rest
of the notify and indicate API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mesh Profile 1.0 Section 6.6:
"The timeout for the SAR transfer is 20 seconds. When the timeout
expires, the Proxy Server shall disconnect."
This will let qualification test case MESH/SR/PROX/BV-05-C pass
without requiring an explicit disconnect.
Fixes#16600
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This moves the processing packets of upper layers from RX thread to the
system workqueue so they have the same priority as the TX callbacks
which has the added benefit of making any protocol on top of L2CAP to
be executed using system wq stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These options are mutually exclusive, or more specifically,
CONFIG_POSIX_API has wider scope and supersedes
CONFIG_NET_SOCKETS_POSIX_NAMES. Implementation-wise, the two
options should not be defined at the same time, as that may
lead to declaration conflicts.
Fixes: #16141
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The struct json_obj_descr definition allocates only 2 bits for type
alignment. Instead of using them literally minus 1 to encode 1, 2, or 4,
let's store the alignment's shift value instead so that 1, 2, 4 or 8 can
be encoded with the same 2 bits to accommodate 64-bit builds.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Not all serial drivers support ASYNC operation and if they do,
they might not support it on every SoC.
Add the SERIAL_SUPPORT_ASYNC option to indicate ASYNC operation
is availiable.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Newer versions of GCC (e.g. gcc 9.1.1) fail to compile the version of
Grub that is used by the Zephyr build_grub.sh script. This patch updates
the version of Grub to the latest (as of June 4 2019) which includes a
number of fixes that solve the problem.
Fixes: #16624
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This extends the UpdateHub library code to allow the
use of IPV6 for communication.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
This extends the UpdateHub library code to allow the
use of CoAPS/DTLS for communication.
Refs: #13039.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
UpdateHub is an enterprise-grade solution which makes simple to
remotely update all your embedded devices in the field. It
handles all aspects related to sending Firmware Over-the-Air(FOTA)
updates with maximum security and efficiency, while you focus in
adding value to your product.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Basically, all driver file names should start with the driver type as
prefix: wdt_ in case of watchdogs here, and not something custom like
wdog_.
For clarity, wdog_ prefix could be changed to wdt_ in the source code
also but that's a detail and will not be addressed here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basically, all driver file names should start with the driver type as
prefix: wdt_ in case of watchdogs here.
Maybe 'iwdg' keyword could be removed entirely, and also in function
names. However that is not the scope of this patch.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We had both kernel and os as domains covering low level layers, just use
one and fix the issue of the os domain not being registered.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support (and documentation) for the Intel Gordon Peak
Module Reference Board, a dev board based on the Apollo Lake SoC.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add a version check to allow building with older GCC versions that did
not support this option.
Fixes#16607
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _k_mutex linker section is used to gather instances of
struct k_mutex into a list so that init_mutex_module() could iterate
that list to perform runtime initialization tasks. In this case, we're
not defining a struct k_mutex but rather a struct pthread_mutex which is
a completely different structure. Not only those struct pthread_mutex
would be corrupted with unexpected data, but since they're not the
same size as struct k_mutex, the actual struct k_mutex instances that
follow in the list would be misaligned and get corrupted too.
There is nothing that requires runtime initialization in the static
definition of a struct pthread_mutex so let's remove the section
attribute.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit fixes the zassert_mem_equal macro to properly print
the formatting string is given as a parameter by the user.
There is an error that is an effect of directly copying the
previous implementation that was using the inline function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
The compiler and linker was generating errors after
disabling `CONFIG_EXTI_STM32` due to inconsistency
in `interrupt_controller/CMakeLists.txt`
and not considering this option in gpio implementation.
Signed-off-by: Maciej Zagrabski <maciej.zagrabski@grinn-global.com>
These events aren't errors at all, but rather part of normal operation.
They shouldn't trigger error messages, especially given that the console
gets absolutely flooded with them if power management is activated.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
When mcumgr smp data was received over shell uart transport
it was not waking up shell thread and thus request was not
processed. Shell thread must be waken up on any incoming
data, even data which is only dedicated for mcumgr smp.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This documents the context in which callbacks are run, that is now
the System Workqueue.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disable flow control with POSIX_ARCH since these boards tend to run
faster than normal defering the TX callback to system wq may not be
able to run before another packet is received.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the transmission complete callbacks to run on system wq
context so they are not executed in TX thread which usually has a much
smaller, and non-configurable, stack size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reworks bt_gatt_notify_cb to allow passing an UUID, in addition to
that it can now accept multiple notification at once as there could be
multiple instance of the same UUID the user can set multiple set of
parameters.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type in gatt show-db to match
attributes by UUID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type to match the CCC UUID which
previously was not possible with bt_gatt_foreach_attr.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_foreach_attr_type which can match attribute by UUID
and/or attribute user_data, in addition of that the user can also limit
the number of matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With code that looks like this:
for (int i = ARRAY_SIZfoo) - 1; i >= 0; i--) ...
If foo is empty, ARRAY_SIZfoo) will return 0. But since it is
implemented using an unsigned long, the answer to 0UL - 1 is
18446744073709551615 on a 64-bit system, and that doesn't fit into
an int. The compiler complains with:
warning: overflow in conversion from ‘long unsigned int’ to ‘int’ changes value from ‘18446744073709551615’ to ‘-1’ [-Woverflow]
Let's fix that and get the expected behavior simply by turning the
unsigned long into a signed long.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The fifo/lifo API is implemented on top of the queue API with macros
that blindly force a cast to struct k_queue. Providing a reference to
the _queue member from the k_fifo structure is much cleaner as it let
the compiler perform pointer type checking. Generated code is identical.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
All architectures declare those variables the same way, no need to
define them per arch, instead put them in common. If someone deviates,
they can create their own header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We had architectures doing this differently, some had a dedicated
sys_io.h file, some not. Unify how it is done by splitting the arch
specific sys_io implementation into a sys_io file and include it
instead.
Move bits_portable.h to arch/common and split the file so more
architecture can reuse some of the definitions here instead of
duplicating code.
Where applicable use the common sys_io/ffs definitions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With gcc 9.1.x on fedora 30 we are getting new warnings that turn into
errors when running sanitycheck. Disable those while the issues are
being addressed.
Relates to #16587
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Documentation updated, added reference to the latest
LPClink2 firmware, default provided firmware may not
work on latest boards (e.g. LPC55xx).
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Board LPCXpresso55S69 added to supported zephyr boards, initial simple
configuration to boot board and use UART.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Importing MCUX drivers will copy fsl_power and fsl_reset to devices,
not drivers as before. Script will exclude 'freertos' drivers from SDK.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Since LPC devices use different power hardware, a separation is
required between device specific drivers and common drivers.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
ip register holds the stack_info.size (it is passed as argument
into z_arch_user_mode_enter(.)). We trust that the value of
stack_info.size contains the accurate size of the writable
stack buffer, above stack_info.start (as specified in kernel.h).
Therefore, we do not need to subtract any bytes for the MPU
stack guard. This allows us to clean-up one more occurrence of
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT in userspace.S.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The internal "reschedule" API has always understood the idea that it
might run in a ISR context where it can't swap. But it has always
been happy to swap away when in thread mode, even when the environment
contains an outer lock that would NOT be expecting to swap! As it
happened, the way irq locks are implemented (they store flag state
that can be restored without context) this would "work" even though it
was completely breaking the synchronization promise made by the outer
lock.
But now, with spinlocks, the error gets detected (albeit in a clumsy
way) in debug builds. The unexpected swap triggers SPIN_VALIDATE
failures in later threads (this gets reported as a "recursive" lock,
but what actually happened is that another thread got to run before
the lock was released and tried to grab the same lock).
Fix this so that swap can only be called in a situation where the irq
lock key it was passed would have the effect of unmasking interrupts.
Note that this is a real behavioral change that affects when swaps
occur: it's not impossible that there is code out there that actually
relies on this "lock breaking reschedule" for correct behavior. But
our previous implementation was irredeemably broken and I don't know
how to address that.
Fixes#16273
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Architectures that lack implementations of synchronous traps (via
Z_ARCH_EXCEPT()) end up using a z_except_reason() implementation that
doesn't actually trap at all. It just invokes
z_NanoFatalErrorHandler() in the current thread context.
That has two problems:
First, it was just blindly assuming that the error handling invoked
would abort the current thread, swap away, and never return. But that
can be application code in z_SysFatalErrorHandler that we can't
control.
Second, it was too broad with this assumption and stuff a
CODE_UNREACHABLE hint in for the compiler. But in fact
z_except_reason() may be invoked in interrupt context (for example the
stackprot check) where it may NOT swap away and WILL return
synchronously from the call. This doesn't seem to have caused a
miscompilation in production code, but it made a total voodoo hash out
of my debugging around this macro for an hour or so until I figured
out why my logging was being optimized out.
Do the abort unconditionally instead of relying on the app, and remove
the incorrect compiler hint.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Contrary to the comment in code, this test is NOT, in fact, compiled
with a traditional ticked kernel. Spinning won't work reliably
because interrupts won't necessarily be delivered when you expect.
This test case would fail spuriously as I moved things around when
debugging.
Doing it right (using a k_timer in this case) is actually less code
anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The z_reschedule() call (as of the accompanying fix) will not swap
away from a thread if called with a nested irq lock held.
But for the specific case of aborting the current thread, we
absolutely need to swap regardless of how many locks the thread that
just aborted might have held. So call z_swap() explicitly here.
This preserves the existing z_reschedule() call in other circumstances
for compatibility with existing test cases, but adds a note explaining
why it's there when the only obvious reason for it is already covered.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's useful to be able to inspect the key returned from
z_arch_irq_unlock() to see if interrupts were enabled at the point
where z_arch_irq_lock() was called. Architectures tend to represent
this is a simple way that doesn't require platform assembly to
inspect.
Adds a simple test to kernel/common that validates this predicate with
a nested lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We do have a multi-architecture latency benchmark now, this one was x86
only, was never used or compiled in and is out-dated.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Add flash partitions.
2. Add macro DT_START_UP_ENTRY_OFFSET. The entry of the RV32M1 is
not the start of the vector table. Add the macro to inform the
entry offset.
3. Update linker file to support MCUboot
a. For normal cases (CONFIG_BOOTLOADER_MCUBOOT is cleared), the
vector table is located last 256bytes of the flash.
b. If CONFIG_BOOTLOADER_MCUBOOT is set, the vector table is located
after the image header of MCUboot.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Configure the LPSPI PCSx pins as GPIO if not dedicated to SPI CS. This
allows using them for SPI GPIO CS.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit changes zassert_mem_equal as a macro instead
of a function implementation.
In the previous implementation when an assertion fails
the location inside ztest_assert.h file was displayed.
This modification displays the location where zassert_mem_equal
was used.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
stm32wb55rg is a dual core SoC (M4/M0) with a radio/protocol stack
running on M0 core. M0 FW starts at flash address 0x80CB000.
So flash size available to zephyr is 812K instead of 1M.
Configure package size to reflect this (flash size is now 812K)
and update MPU setting to exclude M0 FW. From MPU point of view,
we set flash size to 512K since we should chose a size being a power
of 2.
If we consider there will be 2 images partitions in a FOTA scheme,
512 K is beyond image-0 and hence is sufficient to cover application
image.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
sram2a and sram2b where defined in the prospect of defining
HCI shared memory sections from device tree.
Remove them, since this is not the case anymore.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32WB HCI driver requires definition of 2 RAM regions to support
use of 3 shared memory sections: MAPPING_TABLE, MB_MEM1 and MB_MEM2.
In linker.ld, under conditions of HCI driver to be enabled,
define SRAM1 and SRAM2 based on input defined in stm32wb linker.
Then define the 3 sections MAPPING_TABLE, MB_MEM1 and MB_MEM
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit removes redundant checks if the module
was already initialized.
The variable to mark the fact of initialization is
moved as a global module variable.
This allows creating more sophisticated unit tests
of the settings subsystem by giving a possibility to modify
the internal mark of the fact the system was initialized.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Casting the tid variable from a void* into an u32_t just to cast it
back to a pointer is pointless. Let's make it a osThreadId variable
upfront and get rid of those casts around it. This also makes it
64-bit compatible.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The Apollo Lake SoC no longer uses the legacy PCI driver, so remove
references and supporting code.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
While enabling specific I2C ports does indeed belong at the board
level Kconfig, the selection of driver (I2C_DW) is an SoC-level
choice, so it is moved accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Which UARTs are broken out from the SoC on a particular board is
board-specific; don't enable UARTs blindly in the SoC Kconfig.
Also, the default UART options are specified in the driver Kconfig, so
the same defaults specified in the SoC Kconfig are redundant. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Since Kconfig is responsible for enabling/disabling devices at build,
the devices in dt are defaulted to status="ok" to keep the output in
generated_dts_board.conf the same across configurations and simplify
the board-level dts files.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The UART references in dts_fixup.h are actually SoC-specific, not
board-specific, so they are moved. Since this leaves the board fixups
empty, the file is removed.
The SoC fixups are expanded to include the additional two ports that
are present on some revisions of the Apollo Lake.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some firmwares (looking at you, slimbootloader) don't set the registers
in PCI configuration space to indicate the IRQ routing, so we remove
the check that verifies that the user and firmware agree on IRQ number.
Also eliminate the return value of pcie_irq_enable() since no one uses
it and we can't return a meaningful value any longer.
Signed-off-by: Charles Youse <charles.youse@intel.com>
Use a system clock tick of 0.1 sec when running on the NXP TWR-KE18F
development board.
Fixes#16234.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add SPI support to the NXP TWR-KE18F development board. There are no
onboard SPI devices, but both SPI busses are available on the primary
Tower System elevator connector.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Offloaded `fcntl` implementation should be available for all offloaded
implementations, not specific for TI. `socket_offload.c` is already
conditionally compiled based on `CONFIG_NET_SOCKETS_OFFLOAD` option, so
there should not be conflicts for non-offloaded interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Due to in-tree dependencies on Kconfig options defined in modules we end
up having warnings and errors when those modules are not part of the
manifest.
Users should be able to remove unwanted modules from their downstream
manifest and still build any board configurations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support for the async API for SAM0 SERCOM USARTs using
DMA to drive the device.
Tested on SAMD21 with a few trivial programs and with
tests/drivers/uart/uart_async_api.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Implement the get_status DMA API for the SAM0 DMA controller.
The busy field is set only when the selected channel is
actively transferring data (i.e. both enabled and selected by the
arbiter). The direction field is left unset, since that
information is not normally retained by the DMA controller.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Add a flag to the sequence structure that tells the driver it should
calibrate the ADC prior to initiating the sample.
Implement this for nRF SAADC. The implementation supports the
workarounds for PAN-86 and PAN-178.
Relates-to: issue #11922
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Allow user to set log level for UART console drivers. Add
log level option to UART pipe driver in order to see what it
is sending and receiving.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When removing a service using bt_gatt_service_unregister, its attributes
handles will keep their value which can cause a problem when adding the
service again to the GATT database.
When re-adding, the gatt_register routine is taking the last handle of
the GATT database to compare it with the handles of the service to be
added.
If a service has handles with a lower value than the last handle of
the database an error will occur.
If we add/remove/add the last service, no error will occur as its
handles are always greater than the last one of the database.
Instead of resetting the handles when unregistering a service and
reassign new ones we make sure that the handles of the services are
not in use in the GATT database in order to place the service back
where it used to be.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
This enables the ROM bootloader on the CC13x2 / CC26x2 LaunchPad
development boards. The bootloader can be started by holding BTN-1
during reset. This can be useful during development to recover a board
if DAPs get disabled.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Several customer configuration (CCFG) settings are useful for
development and deployment. This commit adds support for setting CCFG
values via Kconfig. It follows TI's recommendation of setting CCFG
values and then including the TI provided CCFG. This commit includes
support for enabling the ROM bootloader and additional settings can be
added as needed.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
On boards that have the arm or nxp mpu, configure the mpu to allow flash
writes. Otherwise this test will fail with an mpu fault.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The HiFive1 and HiFive1 Rev B share the same clock initialization
code, so put it in soc/riscv32/riscv-privilege/sifive-freedom.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The HiFive1 Rev B adds the following features to the
original HiFive1:
- A second UART peripheral 'uart_1'
- A hardware I2C peripheral 'i2c_0'
- Segger J-Link OB
- An ESP32-WROOM attached to the 'spi_1' peripheral bus
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The litex_timer driver used hard coded tick rate (set to 100 ticks
per second). This commit replaces the fixed value with a call to
system function which takes under account system configuration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
There isn't a function to handle the unmount, so I implemented based
in f_mount comments. In the comments of f_mount we actually have
that f_mount is used to mount/unmount logic, is just necessary use
NULL pointer to fs argument.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
arm_core_mpu_enable() and arm_core_mpu_disable() functions are
effectively static functions, only used in the drivers for ARM
and NXP MPU, therefore, we do not need to expose them in the
arm_core_mpu_dev.h header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the wake of moving the internal API header arm_core_mpu_dev.h
into arch/arm/cortex_m/mpu, we need to explicitly declare the
arm_core_mpu_disable() function in the userspace test. Note that
arm_core_mpu_disable() (as any other function in this internal
API) is not supposed to be called directly by kernel/application
functions; an exception is allowed in this test suite, so we are
able to test the MPU disabling functionality.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
arm_core_mpu_dev.h is an internal API, and is not supposed to
be directly called by kernel / application functions, therefore,
we can move it inside arch/arm/core/cortex_m/mpu directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add documentation for the new GUI configuration interface in the
Application Development guide.
Also update all the images, touch up the language a bit, and tweak some
minor stuff:
- Say *.conf instead of .conf to make it clearer that .conf isn't the
literal name
- Add a missing -D<board> argument when running cmake
- Use figure:: instead of image::. Comes out left-aligned and with
space between the images, which looks nicer.
- Explain what '- -' and '-*-' means in the terminal menuconfig.
tkinter isn't included by default in many Python installations, despite
being part of the Python standard library, so also add the required
packages to the Development Environment Setup section of the manual. Add
a note to the Application Development section as well, to help
debugging.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is a graphical configuration interface written in Tkinter. Like
menuconfig.py, it supports showing all symbols (with invisible symbols
in red) and jumping directly to symbols. Symbol values can also be
changed directly from the jump-to dialog.
This interface should feel a lot smoother than menuconfig.py on Windows.
When single-menu mode is enabled, a single menu is shown at a time, like
in the terminal menuconfig. Only this mode distinguishes between symbols
defined with 'config' and symbols defined with 'menuconfig'.
Compatible with both Python 2 and Python 3. Has been tested on X11,
Windows, and macOS.
To avoid having to carry around a bunch of GIFs, the image data is
embedded in guiconfig.py. To use separate GIF files instead, change
_USE_EMBEDDED_IMAGES to False. The image files can be found in
https://github.com/ulfalizer/Kconfiglib/tree/screenshots/guiconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update menuconfig (and Kconfiglib, just to sync) to upstream revision
7e0b9f7ae1, to get these commits in:
menuconfig: Improve space/enter behavior slightly
Space toggles value is possible, and enters menus otherwise. Enter
works the other way around.
Make this explicit in the code, which also fixes some corner cases,
like space doing nothing on a y-selected menuconfig symbol.
-------------------------------------------------------------------
menuconfig: Fix display issue for unsatisfied-deps selected symbol
with children
A symbol with unsatisfied direct dependencies can end up with visible
children in an implicit submenu if it is selected (though that
generates a warning), so the optimization in _shown_nodes() isn't
safe, and causes the child nodes to not be shown outside show-all
mode.
Just remove the optimization. Trying things out some more,
everything's plenty fast enough anyway.
Checking the direct dependencies of the parent instead would be safe.
The menu path now says "(Top)" instead of "(top menu)" too, which is a
bit more compact. Make the same change in genrest.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All three boards use a Skyworks SPDT switch to control whether the
antenna is connected to a PCB antenna or an external u.FL connector.
None of them power up in a state that properly enables an antenna.
Add startup code to configure for the PCB antenna.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14123
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
[mike@foundries.io: adjusted code to use Zephyr GPIO APIs. boron is
now also based on DTS.]
Signed-off-by: Michael Scott <mike@foundries.io>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extend ring_buffer with following functions:
- getting capacity of the ring buffer (which is smaller than
buffer size)
- resetting ring buffer to initial state
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This stores a combination of a pointer and a CPU number in the low
2 bits. On 64-bit systems, the pointer part won't fit in an int.
Let's use uintptr_t for this purpose.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support of Seeed 2.8" TFT Touch Shield v2.0 to ILI9340 driver.
This driver supports color pixel formats of RGB888 and RGB565.
Signed-off-by: Bernard Lee <bernard.lee@nordicsemi.no>
soc_register.h is available in most of stm32 series.
It is sometime empty or contains includes to flash_registers.h,
which is included directly with direct reference in flash driver.
soc_register.h is also included in stm32 clock drivers, but this
driver do not use direct reference to any register anymore.
Clean up these files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Corrected buffer pointer in LVGL zephyr_vdb_write function for
converting RGBA8888 to RGB888 pixel format.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Cleanup logging and fix style. Use hex format specifier
for endpoint address. Remove periods from log messages.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The directory tree description was missing a code-block shorthand so the
following lines weren't formatted correctly.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
MCUboot needs nearly all 8 pages, on some commits even more. This leads
to a overwrite of parts of mcuboot code when an application is flashed.
By improving the size of the boot partition to 10 pages (from 8) and
decrease both application slots by 1 page, MCUboot fits in the boot
loader partition. This is also fixable by an extra .dts, but having an
out of the box working configuration is preferable.
Signed-off-by: Stefan Kraus <stefan.kraus@fau.de>
ESP32 can sport up to 4 network interfaces: two 802.11 (station and
ap), ethernet, and bluetooth. All of them derive from the same RDATA
register in efuse block 0. However, in most cases, the last (sixth)
octet will change like so:
- 802.11 station: mac[5] += 0
- 802.11 ap: mac[5] += 1
- bluetooth: mac[5] += 2
- ethernet: mac[5] += 3
Read "Number of universally admnistered MAC address" section in esp-idf
documentation[1] for more information.
[1] https://docs.espressif.com/projects/esp-idf/en/latest/
Signed-off-by: Leandro Pereira <leandro@hardinfo.org>
Enclose the align argument in parents to make sure the cast applies to
the whole expression when expanded. This is especially important if the
argument contains a ternary operator.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Memory boundaries are declared as extern char arrays which can be used
directly rather than casting their addresses. The cast to u32_t also
breaks 64-bit builds.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is no reason for storing a pointer into an atomic_t variable here.
Not only because this requires a dubious double cast that breaks on
64-bit builds as atomic_t is a 32-bit type, but also because the comment
in the code already admits that the whole operation isn't atomic anyway
and that it is fine. So let's keep things simple.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
prj_tickless.conf lacks the CONFIG_PM_CONTROL_OS=y option which
results in the sample failing to build with this config as it leaves
sys_pm_ctrl_disable_state() and sys_pm_ctrl_enable_state()
undefined.
Add the relevant options from prj.conf to fix the build.
Tested on nrf52840_pca10056.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
- Erase operations must be aligned to the erase-size.
- Don't need to perform an alignment check on a full erase. The offset
is not used in this case.
- Don't need to perform alignment check on a sector sized erase, as
this alignment is checked on entrance to the function.
- Removed some whitespace.
Signed-off-by: Ryan C Johnson <ryan.johnson@flex.com>
Fix a bug in the latency_measure sample where, when the board was
specified through the environment, the wrong prj.conf file was
selected.
This change is not a pure refactoring, as it is believed that there
have been some copy-paste mistakes where prj_small_freq_divider.conf
and prj.conf have become out-of-sync over time. These assumed mistakes
are not carried over in the new organization.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove commented-out code in the latency_measure sample. Commented out
code should not be committed to version control.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
tests/drivers/i2c/i2c_api wants to have CONFIG_I2C_0_NAME defined.
Add it to dts_fixup.h as was done for Watchdog and & timer.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Add Kconfig options:
- ARM_FIRMWARE_USES_SECURE_ENTRY_FUNCS
- ARM_ENTRY_VENEERS_LIB_NAME
Use these to link the veneers lib into the Non-Secure Firmware when
needed.
Also, make the path passed to the linker absolute to make it work with
makefiles.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Add ifdefs to handle the nrf91 case. This change will dynamically
place and size the NSC region according to nrf91 HW limitations.
Add Cmake check of NSC offset if manually set.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Now length of the UDP header is checked, and obviously these test were
avoiding setting it properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The various ptp_clock_driver_api methods receive a struct ptp_context
not a struct eth_context, and the later must be obtained from a
reference stored in the former. Failing to do so by directly
interpreting driver_data as a struct eth_context instance does end up
corrupting memory past the actual struct ptp_context storage. The test
may still pass as ptp_clock_get() reads from the same out-of-bounds
memory as the previous ptp_clock_set() and therefore the content
matches, and with luck the corrupted memory is not essential to the
completion of the test. But that wasn't my case which allowed me to
find this issue.
Fix this by properly obtaining a reference to the struct eth_context
instance via the actual struct ptp_context, and adding a test like
the one found in eth_tx() to make sure we got the right memory.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Documentation update to add instructions to download a
zephyr binary to the target from a Linux host
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Python scripts to download a zephyr binary image (zephyr.bin) to
Intel S1000 from a linux host.
The linux host's SPI master and GPIOs shall be connected to the
corresponding SPI slave and I/Os respectively.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A YAML file to specify configuration of interface I/Os
such as the SPI device, GPIOs, etc.
The image download script configures the host's SPI and GPIO
interfaces accordingly.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
The values were swapped meaning the configured value for rxcnt was used
for txcnt and vice versa.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Match the restriction on title length with checkpatch, since we document
that we follow the Linux style and checkpatch was there before gitlint.
Fixes#14652
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a new callback for L2CAP channels which notities whenever
status has changed so the channel user can can for example resume or
suspend sending depending on the status.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth menu has way too many option so this move the L2CAP
specific option to its own menu.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints to the output when a packet finishes transmitting:
uart:~$ l2cap send 2
Outgoing data channel 0x005166a0 transmitted
Outgoing data channel 0x005166a0 transmitted
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new callback to bt_l2cap_chan_ops which is called whenever a
SDU is completely sent.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes the declaration of fixed channels to be statically defined
with use of BT_L2CAP_CHANNEL_DEFINE since fixed channels are never
unregistered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added CONFIG_LOG_DETECT_MISSED_STRDUP (by default on) which enables
scanning of log message strings in search for %s and reports if
string address is not from strdup buffer pool and outside read only
memory section which indicates that log_strdup() wrapping is missing
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
main.c in the sample was registered to the logger as 'log'. Changed
to 'app'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
As we start adding more modules, all of them end up in
${CMAKE_BINARY_DIR}/ and this is getting too busy. We have a module
directory created for each module and the interesting build data is
getting lost in the crowd.
Move all module into ${CMAKE_BINARY_DIR}/modules to and keep them under
one directory.
Future enhancement: maintain the same structure of the modules as
checked out by west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Solve the issue of having all module Kconfig land in the top level
Kconfig menu when viewed in menuconfig.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If a valid numeric IP address is provided as argument, it should
be resolved without contacting DNS server.
Also, implement handling of AI_NUMERICHOST.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix shell app regression due to stale tmp role implementation
not fully being removed in commit 4c77bf6194 ("Bluetooth:
controller: Remove redundant tmp role implementation").
The regression caused ticker indexes outside of allocations to
be accessed causing application faults and memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add partition table to support MCUBoot. A paragraph of
usage comments was also added in the board documentation.
Signed-off-by: Jun Li <jun.r.li@intel.com>
This changes the use of a static and fixed temperature value to using a
read_callback which will either return the previous dummy value or
gather real temperature data from a supported sensor (for now only
FXOS8700 which is available e.g. on a FRDM-K64F).
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
This adds support for the basic timer counter (TC) found on SAM0
series parts. This driver only supports running the counter
in 32 bit wide mode. Since this mode explicitly slaves the odd
counters to the even ones, only instances of the even ones are
defined.
Tested with tests/drivers/counter/counter_basic_api on SAMD21.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This commit adds the default configuration to the flash_simualtor
to allow unaligned reads.
Disable this option when testing to increase test coverage.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Update the external Segger RTT and SystemView libraries to version
2.52h.
This fixes#14082.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
For native_posix, set NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
by default when a host BT adapter is selected even if TEST
was also set. As using host peripherals one normally needs
also to run with the host time.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Hardware PWM make sense for servo control even in a sample, add HW PWM
choice for NRF52 family, which support it.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Fedora 30 uses GCC 9.1 which fails to build when loggin is enabled:
zephyr/subsys/logging/log_core.c: In function ‘log_is_strdup’:
zephyr/subsys/logging/log_core.c:665:22:
warning: array subscript -1 is outside array bounds of
‘u8_t[]’ [-Warray-bounds]
665 | ((char *)buf <= pool_last->buf);
| ^~
zephyr/subsys/logging/log_core.c:52:3:
note: while referencing ‘log_strdup_pool_buf’
52 | log_strdup_pool_buf[LOG_STRDUP_POOL_BUFFER_SIZE];
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix handlers call for secondary descriptor.
USB class like DFU has two sets of descriptors. In the handler
look up function, wind the pointer forward to the range
of the current descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Refactor wpanusb sample using new descriptor API, use endpoint index
instead of hardcoded endpoint address.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor device api test using standard placement for descriptor table
and configuration data.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that Standard, Class and Vendor request handlers are using the same
buffer, we do not need to keep and array installed request data pointer.
This simplifies the code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that we have merged the class and vendor request buffers into the
USB device code, we can also merge the standard request buffer. We just
need to ensure it is at least 8 bytes, by using the range option in
Kconfig. The 64KiB limit is arbitrary.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the generic pinmux APIs provided by zephyr to select
alternate functions.
This also contains a fix for a formatting issue in the
documentation for this board. Additionally, the serial
console is now on UART2.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Define pinmux base addresses from gpio bases. Pinmux
and gpio functionality are located in the same PCR register
for each pin.
Introduce pinmux Kconfig switches for the SOC.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
This driver introduces pinmux configuration capabilities
using zephyr apis for XEC SOCs.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Clarify that the async receive event length is relative to the
offset, rather than representing an absolute length of data
received.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Add an explict test for the length of the receive event when
doing incremental receives. This was not tested anywhere in the
normal code path (only implicitly in the abort, which wasn't
exercised on the only current implementation, nrfx). So add an
explicit check for it during the chained reads, so that the
test can catch the case where multiple receive events do not set
the length correctly on events past the first.
Tested on nrf52840_pca10056.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This reverts commit d09b91f5. I was incorrect in my interpretation
of the async API: the number of bytes received is relative
to the previous event, so it does "reset" between calls.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
USB_DC_STM32 comes from Kconfig. We have to add the CONFIG_ prefix
to use USB_DC_STM32 in C code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Non-XIP system with FLASH_SIZE = 0 is no-flash system. And no-flash
system makes text, rodata, and data all in SRAM, so define the marco
ROM_ADDR to RAM_ADDR.
Fixes: #16027.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This commit enforces platform-specific initialization
for nRF SoC family. The specific platform initialization
hook is invoked directly after reset and calls the nRFx
SystemInit() function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Rename function _PlatformInit() to z_platform_init() to
comply with naming conventions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow further extention of counter API by replacing count_up bool in
the structure with u8_t flags where one bit is used for count up
feature.
Change is not breaking API as count up property is read using
counter_is_counting_up() that didn't change.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
OpenISA Vega board has Arduino headers which can be configured for
use with Arduino-compatible shields. To enable this in Zephyr,
let's define the gpio-map for Vega and set the appropriate
arduino_serial linkage.
Signed-off-by: Michael Scott <mike@foundries.io>
Having a checksum of zeros in UDP means "missing checksum" and is a
valid case as per RFC 768:
"An all zero transmitted checksum value means that the transmitter
generated no checksum (for debugging or for higher level protocols
that don't care)."
Such support is made possible by adding a new Kconfig option named
CONFIG_NET_UDP_MISSING_CHECKSUM.
However, that is valid only for IPv4. For IPv6, see the RFC 2460
section 8.1:
"Unlike IPv4, when UDP packets are originated by an IPv6 node, the UDP
checksum is not optional."
So the UDP checksum will always be verified in IPv6.
Fixes#16375
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
From RFC 768, in "Fields":
"If the computed checksum is zero, it is transmitted as all ones"
Fixes#16379
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If CONFIG_POSIX_API is defined, automatically use time() function.
The alternative to that is to explicitly configure mbedTLS' timing
source via API, as required for "raw code", but if user enables
POSIX API, we as well might use existing mbedTLS integration.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added support for the LE SC pairing with the OOB data. The peripheral
side is only supported for now.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This change extends the Bluetooth API to support pairing with the OOB
data that are used in the Authentication Stage of the pairing procedure.
The LE Secure Connections specific API for OOB pairing is also added.
The general OOB API should be able to accomodate the LE legacy pairing
later on.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The the footer structure and extra bytes (rssi, resolving index etc.)
were overlapping in memory, rx_ftr was moved into the header, but the
extra and footer are still being read from the same place, extra was
written to the end. So this avoided memory corruption, but reading extra
reads wrong information.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a test case with corner case scenario, in which sector closing
operation is interrupted (e. g. due to power-down).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore part of the data that is written to the simulated flash memory.
This parameter works together with max write calls parameter.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore erases to the simulated flash memory after a certain number
of flash erase calls has been executed.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added option profiling instrumentation which can help determine
string duplicates pool configuration. Added shell command to
read current peak utilization of the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Create a dedicated connector file to hold arduino connector
information for disco_l475_iot board.
This should enhance board dts file readability.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT is taken into
account when allocating the area for the interrupt stack
using the K_THREAD_STACK_DEFINE macro. Therefore, we can
simplify how the top of the stack is derived during the
initialization of the system, by removing one more
occurrence of CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adds a new argument to the jlink runner to reset the device after
loading code to flash. This fixes a problem with the lpcxpresso54114
board where it was necessary to manually reset the board to get new code
to start running after the 'ninja flash' command. This new argument is
optional and false by default because there are some cases were we must
not reset after load, such as when we load the application into ITCM on
imx rt devices.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kconfig symbols I2C_STM32_V1 and I2C_STM32_V2 depends on SoC reference
and user should not have the possibility to choose one or the other.
Remove prompt on these symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
I2C_STM32_V1 and I2C_STM32_V2 are Kconfig symbols used to
select STM32 I2C driver variant based on I2C IP available on a
given STM32 SoC.
Being SoC dependent, they are automatically selected in soc/
if CONFIG_I2C is set. Then there is no need to define them at board
level, nor for a specific application like this is done in
some sample or test applications. Remove these definitions when
this is the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If the QMSI is not configured in (in the west manifest) we get kconfig
whitelisting errors because the type is declared within the module
itself.
Change default to def_bool to set the type.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove a redundant #ifdef CONFIG_MULTITHREADING guard
for a code block already inside CONFIG_MULTITHREADING.
Add some inline #endif comments for ease of reading.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For architectures with custom swap to main, currently:
- arm
- posix
we are now using K_THREAD_STACK_SIZEOF macro to pass the
main thread stack size to z_arch_switch_to_main_thread().
This does not introduce any behavioral changes for posix;
the K_THREAD_STACK_SIZEOF() simply returns the sizeof()
the stack object. For Arm, this allows us to clean-up one
more occurence of CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
in kernel_arch_func.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix compilation issues in central_hr or peripheral_hr sample when using
split LL and privacy is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The node_rx buffer does not contain the data from the connect ind, so
copy it over.
Also back up the adv pdu chan_sel bit so that it can be used to properly
select the correct channel selection algorithm
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The node_rx buffer for the connect ind buffer is being reused to send
connection complete event, make sure all data is backed up before
reusing the buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The privacy state variables rl_idx and rpa_gen was not initialized
properly, which results in connection failing to be established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for the Low Power Inter-Integrated Circuit (LPI2C)
controllers found in the NXP Kinetis KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
commit 79672d16 was missing the fact socket layer is putting net_pkt
into a k_fifo. However, it's on receiving side only: at this point the
k_fifo_put is using the k_work area which is then useless at this
point Thus why it did not break anything, as k_fifo only needs 4 bytes
while the k_work attribute takes 12 bytes.
Thus adding a union on the k_work attribute with another new attribute
that describes the behavior.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added a test for testing full round GC on 3-sectors
configuration. In this case all kind off sector can
appeared so this test covers well more numerous
sectors configurations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fix that removes magic numbers from the code that
leaded to the error codes that was hard to explain.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Make headers look like this instead:
/* From ${ZEPHYR_BASE}/arch/common/isr_tables.ld: */
Besides being shorter and more "private", this makes the content of
snippets-*.ld files the same no matter who built them and where.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Commit 88fb8bacfb ("scripts: improve west build's board handling")
lets us specify the board with a build.board config or BOARD
environment variable.
However, under some conditions, e.g. if the use has
build.pristine=auto and build.board=some_board, the following fails a
check_force call:
west build samples/hello_world
west build samples/philosophers
The problem is that the check_force wasn't made aware of the other
places a board can come from. Fix that.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The module processing logic in Zephyr requires Python, since it uses a
Python script to locate and process the modules. It is therefore
required to find the Python executable using CMake before actually
including the CMake script that processes the modules. In order to
prevent this from happening again, move the inclusion of version.cmake
as well in case that script chooses to use Python in the future.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With the addition of a local CMake variable ZEPHYR_BASE that mirrors the
value of the environment variable the documentation build broke on
Windows. This is because CMake was incorrectly interpreting backslashes
present in the Windows path as escaping characters. In order to avoid
this, use CMake's built-in file(TO_CMAKE_PATH) functionality, which
converts the path to a canonical version using forward slashes only.
At the same time rework boilerplate.cmake to use the same mechanism
instead of manually replacing backslashes and removing trailing ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The "select" command has been implemented, which allows user to
narrow down the command tree.
This implementation differs from the "select" command available
in the legacy shell. In a new implementation, if the selected
command has a handler and if the user has not entered the
registered subcommand, the shell will call the handler of selected
command and pass the text as arguments.
This may be useful, for example, if someone wants to use the
shell as an interface to a modem that supports AT commands.
Instead of each time you write e.g:
at at+command1
at at+command2
at at+command3
user can execute following commands:
select at
at+command1
at+command2
at+command3
where:
at - root command for passing at commands to the modem
at+commandX - at command passed to the modem.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Like for other choices, it's the prompt that gets displayed within the
parentheses, not the symbol name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Takes a while to figure out what it's there for, so explain what it does
and give an example of a good use for it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The 32bits one can hold up to about 50 days, this is more than enough
knowing that ARP request timeout is 2 seconds.
So reducing the request start time to 32bits.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute was used when net_pkt where queued into a fifo. However,
since the cove to k_work queues (due to the introduction of TC), such
attribute has been totally useless.
Removing it gains 4 bytes in net_pkt structure.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the prj_base.conf was renamed to prj.conf by commit
4e5300ba7f, the documentation
needs some fixing too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not always print general help for ping cmd. Only if user supplies
'-h' or '--help' command, print information about the parameters.
After this the generated HTML documentation looks better for the
ping command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the timer_api test in order to take under account
fact that timeouts used in the test might not be aligned to tick
boundary.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
As printf() is now used directly instead of printf proxy function,
there's warning-as-error that long long is passed where %lu
expected, so cast it explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
That means that when mbedTLS will need functions like snprintf(),
printf(), a few others, they will be used from libc, as done
normally by most of software. Note that mentioned functions
aren't normally used on code paths doing TLS communication per se.
Instead, they are used by debug logging, additional "print info"
style functions, etc.
Before, when MBEDTLS_PLATFORM_NO_STD_FUNCTIONS was defined, those
functions were stubbed out, so silently didn't work as expected
(a specific symptom seen was that some debug messages were printed
as garbage, because an buffer on stack was passed to dummy snprintf
stub, which didn't do anything to it, and its uninitialized contents
were printed afterwards. Instead, the expectation was that an
application would call a "setter" function to set snprintf, etc.
implementations as provided by application itself.
For Zephyr, we clearly don't need to burden applications with such
setup, instead Zephyr, as an OS, provides integrated environment
were matters like that "just work". So, we just switch to libc-based
functions. If there ever will be usecases for
MBEDTLS_PLATFORM_NO_STD_FUNCTIONS, it can be made configurable later.
Fixes: #16303
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Execute the test binary from the output directory instead of directory
where sanitycheck was started.
This will ensure that any artifact created with a relative path by the
test binary will be placed in the output directory instead of creating
the artifact in the directory where sanitycheck was executed and prevent
any possible conflicts.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Documentation moved to the right place.
The argument name of the macro is aligned between the macros.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
It is recommended that multibyte (burst) transfers are used to read
acceleration and temperature data. This ensures the data is concurrent
and complete.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Enables the mcux lpi2c shim driver and pin muxes on the mimxrt1060_evk
board. Updates the board documentation and yaml supported list
accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Since there is no NFC antenna connector on the dongle and the pins
P0.09 and P0.10 that are dedicated to NFC functionality are in the
group of just a few ones available for external connections, it seems
more reasonable to configure these pins by default as regular GPIOs,
as users will most likely want to use them in this way.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
when kobject text area is greater than CONFIG_KOBJECT_TEXT_AREA,
there will be location counter backwards, change it to assert to
prompt configuring CONFIG_KOBJECT_TEXT_AREA larger.
Fixes: #16307.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
OpenThread uses CONFIG_OT_PLAT_FLASH_PAGES_COUNT to calculate the # of
pages at the end of flash to use for storing OpenThread settings.
This calculation has an off-by-one error which sets the offset for
the storage area as 1 page of flash too low.
For example, on nRF52840:
- default setting for CONFIG_OT_PLAT_FLASH_PAGES_COUNT is 4
- flash size is 1MB (0x100000)
- flash page size is 4096 (0x1000)
- expected offset is 0xfc000
Using the current logic we get an offset of: 0xfb000
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16339
Signed-off-by: Michael Scott <mike@foundries.io>
If we have something like:
#address-cells = <1>;
#size-cells = <0>;
intc: ioapic@fec00000 {
compatible = "intel,ioapic";
reg = <0xfec00000 0x100000>;
};
We should generate:
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_0
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_1
Instead we generated:
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_1
This was due to logic deciding if '_0' should be used not taking into
account #address-cells & #size-cells correctly.
Fixes: #16296
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the system sets its clock frequency at runtime, this is
stored in a variable that can't be directly read by user
mode. For this case only, add a system call to fetch its
value and modify the definition of
sys_clock_hw_cycles_per_sec() to use it.
Since this is now a system call, store in a temporary variable
inside z_ms_to_ticks(). The syscall overhead only applies
when called from user mode, other contexts are completely
inlined.
Added stub syscall header for mocking framework, to get rid
of inclusion errors.
Fixes: #16238
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The node name for device_id was device_id@0 it should be
device_id@80a00c to reflect the first register region
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
import linux-v5.1:Documentation/devicetree/bindings/vendor-prefixes.txt
Use vendor-prefixes.txt to check vendor prefixes
used in compatible strings and property names.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Previous the register size was 1M, technically the there are only a
small handful of registers defined in the IOAPIC, so shrinking the size
to 4k, so its as most one page large.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The IOAPIC node shouldn't have been in the cpu container, especially
since the cpu container does:
#address-cells = <1>;
#size-cells = <0>;
So the reg field of the IOAPIC would be treated as 2 registers instead
of a register and size. Move IOAPIC node out of the CPU node fixes this
issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This tries to build gpio without any driver which fails at cmake time
like this:
CMake Error at ../../../cmake/extensions.cmake:378 (add_library):
No SOURCES given to target: drivers__gpio
Call Stack (most recent call first):
../../../cmake/extensions.cmake:355 (zephyr_library_named)
../../../drivers/gpio/CMakeLists.txt:3 (zephyr_library)
Remove TEST_USERSPACE workaround added in commit 3b53e69249 which
added gpio_handlers.c to the SOURCES.
Fixes#15232.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Introducing the macro toolchain_cc_warning_error_implicit_int which,
abstracts the implicit_int error flag thus leaving it to the toolchain
to decide whether this flag is needed or not.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The macros are named toolchain_cc_warning_error_misra_sane and
toolchain_cc_cpp_warning_error_misra_sane
These macros provide toolchain specific flag(s) relating to the MISRA
SANE configuration option.
The macros will place the flag(s) in a variable provided by caller,
which can then add to zephyr compile options.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Code refactored to allow calling of a proprietary rx demux function.
This will enable implementation of proprietary protocols and
functionality that is not yet public, while keeping a common zephyr
code base.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fixes USB3CV Tool tests. One case is enabling endpoints with Set
Interface after Set Configuration. In this case we report warning and
continue without returning error.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch fixes following bug:
After first GC operation the 1st sector had become scratch
and the 2nd sector had became write sector. After that NVS
was initialize (via reboot) again - it recognized the 1st
sector as write sector and 2nd as undone GC destination sector,
therefore it cleared 2nd sector and re-run GC, which implied data loss.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Test that k_usleep() allows sleep durations near the limit of what
the platform's tick rate will allow.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add k_usleep() API, analogous to k_sleep(), excepting that the argument
is in microseconds rather than milliseconds.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Current z_impl_k_sleep() does double duty, converting between units
specified by the API and ticks, as well as implementing the sleeping
mechanism itself. This patch separates the API from the mechanism,
so that sleeps need not be tied to millisecond timescales.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Move to a new guide which will expand on how to submit modules and how
to maintain them.
Also move topology documentation to repository management section where
it fits better.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A conditional block to save a directed advertising report flag was
present three times. Remove two of the blocks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
These definitions were left incorrect after a gpio-map change was
added to the PR introducing the boron support for the SARA-R4 modem.
Correct the gpio defintions here so that the boron build doesn't
break.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16289
Signed-off-by: Michael Scott <mike@foundries.io>
builds@lists.zephyrproject.org archives the CI build results for every
and nightly build. Add references to this in the contribution
guidelines and introduction (pulled from README).
Also added a reference to the "Asking for Help" doc (there was a note to
add this once that doc was merged).
Fixes: #15652
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
GATT long messages require buffers to store multiple packets. The actual
configuration for the bluetooth peripheral sample defines only two
buffers to store these messages. As the default ATT payload size is
18 bytes, the maximum payload size for a long ATT message is 36 bytes.
As the variable `vnd_long_value[]` has a defined size of 74 bytes, it
cannot be fully modified due to the 36 bytes limitation.
Set CONFIG_BT_ATT_PREPARE_COUNT=5 so all the maximum payload size goes
to 90 bytes and all the 74 bytes can be written to `vnd_long_value[]`.
Signed-off-by: Joao Cordeiro <jvcc@cesar.org.br>
There was a missing break at the end of the high speed setup case,
so it would always return -ENOTSUP even when the high speed baud
was available.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Add option for enabling the Code Cache present on the NXP Kinetis
KE1xF SoC series and enable it by default.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When in Sharing Floating Point Services mode we want to
dynamically save and restore the FP registers in thread
context switch, depending on whether the swapped-in and
swapped-out threads are currently using the FP registers.
This commit adds this functionality to the ARM context
switch mechanism. The logic consists of inspecting the
corresponding status flag (present in thread.arch.mode)
to decide whether to save or restore the FP registers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Only a single bit of the 4-byte internal (thread.arch) status
variable 'mode' is currently used, when we build with User mode
support (CONFIG_USERSPACE=y). In this commit we extend the usage
of 'mode' variable, adding an additional bit-flag to track the
status of the floating point context in a particular thread,
i.e. to track whether FP context is active or not. The status
bit is meant to be used in context-switch, to restore the FP
register context when required.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The initial carved stack frame only needs to contain the basic
stack frame (state context), because:
- under No/Unshared FP Services mode no FP context is stacked.
- under FP Sharing mode FP context is cleared upon thread
creation.
This commit removes the unnecessary stacking of the FP context
during thread initialization. This results in reduced stack
usage under the Shared FP Services mode (CONFIG_FP_SHARING=y).
Also, we do not need to initialize the FPSCR, because there is
no FP stack frame carved.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In FP Sharing mode we enable both automatic and lazy state
preservation of the FP context. This configuration improves
interrupt latency. Under this configuration the FP registers
will only be stacked when the thread is swapped out during
context-switch. Before jumping to main() we clear the FPCA
flag of the CONTROL register, so the FP context can be used
by the main thread.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This commit consolidates the temperature conversion into a single
location and subtracts the bias from the measurement using values from
the datasheet. Also magic numbers have been replaced with more
descriptive macros.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
This driver uses magic numbers which are incorrect. A correct conversion
is done using the LSB/g scale factors given by Table 1 in the
specifications section of the ADXL362 (Rev. F) datasheet. The entire
conversion has also been consolidated into a signal function.
The sensitivity and offset of the accelerometer values actually vary
with the supply voltage and temperature. Using datasheet provided values
for 25 C and 2.0 V is the best we can do. Users will need to apply
sensitivity and offset corrections for their application.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The return code check and error return on the interrupt register
configuration function call should be included in the #if defined
region.
Fixes#16159
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The 'Graphical user interface' menu currently contains just the
'LittlevGL Support' symbol and its indented children.
To remove one menu level, remove the 'Graphical user interface' menu,
rename the symbol to 'LittlevGL GUI library' (consistent with e.g.
'Logging' and 'Bluetooth'), and turn it into a 'menuconfig' symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Drop packet if it has broadcast destination MAC address but the IPv4
destination address is not multicast or broadcast address.
See RFC 1122 ch 3.3.6 for details.
Fixes#16276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We generated some alias defines for children of a bus in which we had a
path alias for the bus node. We never used these defines, we don't
recommend they get used (child of busses should use instance defines)
and they were only generated in small handful of cases (for dts that had
path aliases to the bus node - i2c or spi).
Remove this as effectively dead code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On STM32 series currently available in Zephyr,
LPUART and U(S)ART IPs are similar and share most of their
registers. As a consequence LL API defined for U(S)ART also
applies to LPUART.
This allows to remove specific LPUART code.
Restrict use of LL LPUART API when it diverges from UART one.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The net_if_ipv4_select_src_addr() should return global address
in the interface if nothing else is being found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive a multicast ICMPv4 packet, then send the reply back
with correct source address and not with multicast address.
Fixes#16257
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When Zephyr crashes immediately QEMU reports an error immediately. This
is immediately reported by "make run". Then sanitycheck points the user
at the output of "make run". However the error message(s) are in QEMU's
output which is in a different .log file.
To address this situation point the error message at handler.log
instead of run.log if and only if handler.log is not empty.
To reproduce here's an artificial but very simple crash:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n \
-p qemu_x86 -T tests/kernel/mem_protect/stackprot/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Move includes to outside of the extern "C" statements to fix C linkage
issue.
| /include/misc/util.h:53:1: error: template with C linkage
| template < class T, size_t N >
| ^~~~~~~~
Signed-off-by: Greg S. Woods <gwoods@lexmark.com>
Enable pull-up on UART TX pin to reduce power consumption.
If the board is powered by battery the SoC consumes more
power than expected.
The consumption increases because TX pin is floating
(High-Impedance state of pin B from Dual-Supply Bus Transceiver).
Similar to commit b5b728495b
("boards: reel_board: enable pull-up on UART RX pin")
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Previous version calculated rt_clock_base incorrectly by subtracting
clock_gettime from the specified time. Effectively the following
formula was used.
rt_clock_base := new_time - clock_gettime()
This is clearly incorrect when we consider what should happen if we
call clock_settime with the result of clock_gettime. It ought to be
approximately a no-op, but instead we end up zeroing the clock.
rt_clock_base := clock_gettime() - clock_gettime() = 0
This patch fixes clock_settime by instead using k_uptime_get to
calculate rt_clock_base, like so:
rt_clock_base := new_time - k_uptime_get()
Trying the earlier thought experiment we get:
rt_clock_base := clock_gettime() - k_uptime_get()
Using the definition of clock_gettime this expands to:
rt_clock_base := (rt_clock_base + k_uptime_get()) - k_uptime_get()
The two k_uptime_get() terms cancel out, leaving:
rt_clock_base := rt_clock_base
I.e. the no-op that we expect when calling clock_settime with
the result of clock_gettime.
Note: The bug is only observable when rt_clock_base is non-zero.
So when clock_settime is called for the first time, it will appear
to work correctly since rt_clock_base is initialized to 0.
Signed-off-by: Alexander Mihajlovic <alexander.mihajlovic@endian.se>
I2C support has been added back into the up_squared, leveraging the
new PCIe support in the DesignWare I2C driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Apollo Lake devicetree is augmented with its 8 I2C interfaces.
The default number of dynamic IRQ stubs is increased to deal with
these new interfaces having IRQ vector detection at runtime.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The legacy PCI support in the DesignWare I2C driver is replaced with
the new PCIe support. The Intel Quark X1000 SoC and the galileo board
configurations are updated accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The 50-odd lines of boilerplate per I2C port is moved into a template
which is generated by CMake as needed at build-time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The SBL configuration no longer differs in any detail (except its name)
from the "standard" UpSquared configuration, so it is removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This needs to be pushed down to the SoC level, as it's an Apollo Lake
feature, not a feature of the UpSquared. Remove the Apollo Lake
references to the PCI devices because these will not be used when I2C
support is restored.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This option is no longer used in the dts_fixup.h file since there
are no SBL-specific fixups.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The second serial port (UART_1) can be used for connecting to
host serial port. This is used for example by PPP (Point-to-Point
Protocol) implementation in which case the pppd running in Linux host
connects to a pty that is linked to UART_1 in Zephyr.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
'west --version' output has the path to the west manifest directory.
If there is a semantic version string in this path name, it will
raise a false version check failure.
Signed-off-by: Thomas Stilwell <Thomas.Stilwell@nordicsemi.no>
The Particle.io Boron is an nRF52840-based board with a connected
u-blox SARA-R4 modem. The main board was previously upstreamed
without modem support.
Now that we have a driver to support the SARA-R4 modem, let's enable
it for the Boron board.
Signed-off-by: Michael Scott <mike@foundries.io>
SparkFun offers an Arduino-R3 compatible shield using the SARA-R410M-02B
LTE Cat M1/NB-IoT modem.
Now, that the basic SARA-R4 modem driver is implemented, let's enable
the shield for several MCUs supporting Arduino-R3 compatible headers.
Product Link:
https://www.sparkfun.com/products/14997
Signed-off-by: Michael Scott <mike@foundries.io>
The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat
M1 / NB1 ready:
- Configurable with a single hardware version
- Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS -
only/preferred
- Low power consumption and longer battery life
- Extended range in buildings, basements, and with NB1,
underground
This driver introduces support for basic AT commands to
query modem information as well as socket connection
for TCP/UDP communication.
Signed-off-by: Michael Scott <mike@foundries.io>
The SARA-R4 series modules from U-Blox are size-optimized LTE-M /
NB-IoT and EGPRS modules designed for low power consumption and
longer battery life.
The binding identifies the UART device, power GPIO and reset GPIO
lines.
Signed-off-by: Michael Scott <mike@foundries.io>
Instead of using the now removed overlay files, use the SHIELD=
command-line option for testing the WNC-M14A2A modem.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's change the specific WNC-M14A2A check into a more generic
MODEM check for enabling ethernet. Many of these pins are used
on the Arduino headers.
Signed-off-by: Michael Scott <mike@foundries.io>
The WNC-M14A2A shield configuration has HW specific settings in place.
We can remove those settings here.
Signed-off-by: Michael Scott <mike@foundries.io>
This shield uses a non-standard UART exposed via Arduino-R3
compatible header pins.
It has configurations for FRDM_K64F and nRF52840_PCA10056.
Signed-off-by: Michael Scott <mike@foundries.io>
Shields can often be very complex to setup in a generic way for several
boards to support. Let's allow shields to have their own .conf files
as well as specialized overlays per board (when needed).
Signed-off-by: Michael Scott <mike@foundries.io>
The label binding was missed during initial development of the
WNC-M14A2A modem. Let's add the binding so that during the
migration to a shield, we can update the DTS correctly.
Signed-off-by: Michael Scott <mike@foundries.io>
Assert is checking the array size of pinconfig. Not the actual
size of the structure.
Fixes issue reported by Github User @weinholtendian
Signed-off-by: Michael Scott <mike@foundries.io>
Caller will handle freeing packet if error is encountered.
Fixes issue reported by Github User @weinholtendian:
<err> net_pkt: *** ERROR *** pkt 0x20027e78 is freed already
by offload_sendto():1717 (context_sendto():1473).
Signed-off-by: Michael Scott <mike@foundries.io>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The compiler generates errors of the form
error: "CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT" is not defined,
evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_IRQ_OFFLOAD" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_USERSPACE" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_STACK_POINTER_RANDOM" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_ARC_FIRQ" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_USERSPACE" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
ARM SysTick peripheral is optional in Cortex-M0 MCUs,
so we delete the respective dts node when the peripheral
is not present.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Atmel SAM D series SoC variants (present in the tree) all have
an ARM Cortex-M0+ core, not a Cortex-M0, so we correct this in
the .dtsi header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Unlike Cortex-M3 and Cortex-M4, in Cortex-M7 the number of
MPU regions may vary based on the implementation. This commit
adds a DTS node for the ARM MPU peripheral in the device tree
of Cortex-M7 SoCs and updates the fixup files, so we may extract
the number of MPU regions at build time. SoCs:
- nxp_rt
- same70
- stm32f7
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a DTS node for the ARM MPU peripheral in the
device tree of ARMv8-M SoCs (for the secure and the non-secure
DTS descriptions) and updates the fixup files. SoCs:
- nrf9160
- musca_a
- musca_b1
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make _get_num_regions() return a constant representing the
number of HW MPU regions, defined in DTS, if such define
is available. This removes the need of evaluating the
number of regions at run-time. The ASSERT in arm_mpu_init()
is expanded, to cover that case, where the number of
regions is taken from DTS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add DTS binding files for the ARM MPU, for both ARM
MPU architecture variants, ARMv7-M and ARMv8-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In z_NanoFatalErrorHandler() we want to print the name
of the thread that has faulted, when building with
CONFIG_THREAD_NAME. This commit adds this functionality
for the Arm architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Put the symbols that depend on DISK_ACCESS_{RAM,FLASH,SDHC} directly
after the symbol they depend on, so that they end up in an implicit
indented menu. That makes it easier to see which symbols are related.
It also indirectly makes all symbols children of DISK_ACCESS. To save a
menu level, turn DISK_ACCESS into a 'menuconfig' symbol and put it in
the top-level menu. Change its prompt from "Enable Disk Interface" to
"Disk Interface", to be consistent with e.g. "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This will substitute the ZSH_VERSION in case it was unset or null. No
more error message will be printed when unset variables are treat as an
error.
Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
The typeof definitions in tz.h and cmse.h are not required
any more, as the ARM GCC toolchain intrinsics have been
modified to use __typeof__ directly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add test for a proprietary HCI Vendor-Specific event.
In the test the controller is replaced with a small stub controller,
with limited support of the initialization flow from the host.
After initialization, a HCI prop event callback is registered and an
prop event is triggered and sent to the host. It is then verified that
the registered callback is called.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add an event handler for HCI vendor-specific events with the
event code BT_HCI_EVT_VENDOR.
A vendor defined callback can be registered to be called when
vendor-Specific events are received in the stack. The callback can then
decode and handle the event; if not the stack will decode and handle
the event.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Make sure we are able to receive UDP packets with broadcast
destination address. If CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
is set, then check here also non-standard broadcast address
that is described in RFC 1122 chapter 3.3.6.
Fixes#11617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ACRN board configuration is not suitable for production use,
but many people are mistakenly using it as a starting point for
real-time applications. I've added a note to clarify.
Signed-off-by: Charles Youse <charles.youse@intel.com>
https://github.com/zephyrproject-rtos/ci-tools/pull/65 tweaks the check
for references to undefined Kconfig symbol to whitelist anything on the
form 'CONFIG_FOO_*' (or 'CONFIG_FOO_*_...'). This is meant for #endif
comments that talk about many related symbols.
Fix two existing #endif comments to use that format, so that some
entries can be removed from the whitelist in the CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The compiler was generating errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef] when -Wundef is used and the config option was turned
off. Change check to ifdef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler was generating errors of the form
error: "CONFIG_TRACING" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to ifdef/ifndef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler was generating errors of the form
error: "CONFIG_LOG" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to ifdef/ifndef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler was generating errors of the form
error: "CONFIG_LOG" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
several #if checks to #ifdef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
From POSIX.1-2017:
The getsockname() function shall retrieve the locally-bound name of the
specified socket, store this address in the sockaddr structure pointed
to by the address argument, and store the length of this address in the
object pointed to by the address_len argument.
The address_len argument points to a socklen_t object which on input
specifies the length of the supplied sockaddr structure, and on output
specifies the length of the stored address. If the actual length of the
address is greater than the length of the supplied sockaddr structure,
the stored address shall be truncated.
If the socket has not been bound to a local name, the value stored in
the object pointed to by address is unspecified.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
In kernel_arch_init() we initialize the ARM core (interrupt
setup, fault init, etc.) so we can also move z_clearfaults()
in the same function and skip invoking it in the SoC init
functions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
During the conversion of .bin to .o objcopy was not setting the
section to be readonly causing the .rodata in the final image has
write permission.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add enum to list what values of maximum-speed are exceptable since
enum's get represented as strings in DT. This also allows us to
generate a code enum to correspond to the string.
We also introduce include/dt-bindings/usb/usb.h which is a hand coded
definition of the enum. We don't have a great way to generate this
right now, however it would be better if we did.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add specific enum generation support related to usb 'maximum-speed'
property. This will generate a define with _ENUM with the integer
value of the enum as its ordered in the YAML. The assumption right
now is that there's a matching enum in the code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When using the procedure Read By Type the response may contain multiple
instances so it needs to be parsed properly. When dealing with long
values only the beggining will be read, for the remaining bytes the
application should issue another bt_gatt_read with offset so Read Blob
procedure is used as recommended by the spec:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F page 2312:
The Read Blob Request would be used to read the remaining octets of a
long attribute value.
Fixes#16107
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With -O0 optimizion, gcc compiler doesn't inline "static inline"
marked function. So when function call return from function
set_and_switch_to_psp which is to switch sp from MSP to PSP, the
ending "mov sp, r7" instruction will overwrite the just updated
sp value(PSP) with the beginning stack pointer(should be MSP)
stored in r7 register, so the switch doesn't happen. And it causes
unpredictable problems in the initialization process, the backward
analysis for this problem can be found on Github issue #15794.
Fixes: #15794.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
If host is NULL and ai_flags are AI_PASSIVE in a call to
getaddrinfo(), need to return "any" address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Allows specifying the 'overlap' argument in IntelHex::merge().
This is identical to the --overlap argument in hexmerge.py, which
is bundled with IntelHex.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The value of GPIO_INT_ACTIVE_LOW is 0, so the bit checking if statement
is never executed. Use GPIO_INT_ACTIVE_HIGH when checking this bit.
Fixes#16162
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
- Make the 'C++ Standard' choice depend on CPLUSPLUS, so that it only
shows up when C++ support is enabled.
Also check that CPLUSPLUS is enabled before checking the standard in
the top-level CMakeLists.txt, to avoid triggering an assert.
- The 'C++ Options' menu now contains just CPLUSPLUS and its indented
children. Remove one menu level by removing the menu and turning
CPLUSPLUS into a 'menuconfig' symbol. Also change the prompt from
"Enable C++ support for the application" to just "C++ support for the
application", to make it consistent with e.g. "Logging".
- Factor out the common CPLUSPLUS dependency with an 'if CPLUSPLUS'.
- Order symbol properties more consistently with other Kconfig files,
with the prompt at the top, etc.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Let's not mess with CommandContextError here, as the APIs have gotten
messed around a bit in various versions. Just use log.die() as that
will work with current and future west versions, and is clearer anyway.
Fixes west 247.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The current order makes no sense. Move it earlier in the order, so the
catch-all page appears last.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Grammar and formatting improvements, as well as changes requested in
review that weren't made (in particular, the ones recommending using
"pip3 show -f west" to see where west is installed instead of listing
common places that might not be right.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
If reception was longer than rx timeout, UART_RX_RDY event
would provide data with delay, and synchronise at buffer end.
This change makes sure that all data is given to user when timeout
occurs.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Sample walk through:
1. CPU 0 will wake up CPU 1 after initialization
2. CPU 1 will send to CPU 0 an interrupt over MHU0
3. CPU 0 return the same to CPU 1 when received MHU0 interrupt
4. Test done when CPU 1 received MHU0 interrupt
The wake up second core and private core ID are soc specific.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
MHU (Message Handling Unit) enables software to raise interrupts to
the processor cores. It is enabled in SSE 200 subsystems.
This patch aims to implement inter processor communication.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add a sample application that demonstrates how to use the ADXL362 with
data ready and threshold triggers.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Zephyr requires braces on every code block that a keyword introduces, so
list the complete set in the documentation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adding missing erase-block-size entries for the flash-controller
nodes in the nrf52810 and nrf52811 .dtsi files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an option for building with newlib-nano library.
The newlib-nano library for ARM embedded processors is a part of the
GNU Tools for ARM Embedded Processors.
Add mem_alloc tests with newlib nano.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
The 'Console' menu contains just 'config CONSOLE_SUBSYS' and its
indented children.
Remove one menu level by removing the 'Console' menu and turning
CONSOLE_SUBSYS into a 'menuconfig' symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit fixes a build error, when building with
CONFIG_ARM_SECURE_FIRMWARE=y. The error was introduced
in #15930 (6f19d0), where we added internal structure
to the exception stack frame struct.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This menu contains just the IMG_MANAGER symbol and its children. Remove
one menu level by making IMG_MANAGER a top-level 'menuconfig' symbol
instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a minimal sample that showcases minimal ROM sizes. It can be built
in several configurations, all very restrictive when it comes to
features enabled in order to verify the fact that we can fit in small
devices and to be able to accurately measure the sizes of the kernel's
basic features.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The CONFIG_CLOCK_CONTROL and CONFIG_NRF_RTC_TIMER were
unconditionally selected when enabling any nRF SoC. But since
timers can be disabled in the kernel, depend instead on
CONFIG_SYS_CLOCK_EXISTS, which is only defined when kernel
timer support is included.
Note that ideally we would enable CONFIG_NRF_RTC_TIMER only, and
that would select CONFIG_CLOCK_CONTROL (on which the RTC timer
depends) but there is a circular Kconfig dependency that prevents
us from doing so.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling the kernel with CONFIG_SYS_CLOCK_TICKS_PER_SEC=0,
the CONFIG_SYS_CLOCK_EXISTS internal variable is unset.
This completely disables timer handling in the kernel, but a couple of
spots missed the required conditional compilation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Reduced Kconfig for counter with nRF TIMER and RTC. Added overlays
for TIMER and RTC configuration in the counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Port fix for #14044 from legacy LL to split LL.
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove comment stating that UNKNOWN_RSP during encryption procedure
is a workaround.
The core spec mandates that connections should not be dropped if
receiving this control packet during encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the new math_extras functions instead of calling builtins directly.
Change a few local variables to size_t after checking that all uses of
the variable actually expects a size_t.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
The implementation of the <misc/math_extras.h> functions will use the
portable C code when PORTABLE_MISC_MATH_EXTRAS is defined before
including the header.
Use this feature macro to make sure that the unit test always tests the
portable functions in addition to the ones using builtins for the
current compiler.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
When available, use the GCC / Clang builtins to implement the
math_extras functions. Otherwise, use the portable versions.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Compilers based on Clang provide a __has_builtin(x) macro which can be
used to detect in the preprocessor if a given builtin function is
supported by the compiler.
For other compilers (notably GCC), we provide an alternative definition
of HAS_BUILTIN(x) that depends on the toolchain-specific header file to
declare which builtin functions are supported based on the current
compiler version.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Add a <misc/math_extras.h> header file with portable implementations of
a number of commonly used math and bit counting operations that are not
available in the C programming language.
The math_extras functions fall into two groups:
1. Unsigned integer arithmetic with overflow detection. Addition and
multiplication are provides for the u32_t, u64_t, and size_t types.
This commit doesn't include subtraction and division, and there are
no signed operations. These could be added later if there is a need.
2. Bit-counting operations like clz, ctz, and ffs. These are provided
for u32_t and u64_t only. I don't see a need for size_t operations,
but they could be added if needed.
A follow-on commit will add more efficient implementations using
compiler builtins for those compilers that support it.
Another commit will replace other uses of "naked" compiler builtins with
calls to these functions.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Hygiene: We don't query MPtables (anymore?), so the related definitions
in the local APIC driver are unused. Removed.
Signed-off-by: Charles Youse <charles.youse@intel.com>
Add support for the NXP TWR-KE18F development board. This board
feautures an NXP MKE18F16 MCU, a selection of user LEDs and
push-buttons, potentiometer, thermistor, CAN interface, and FlexIO
header.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for CLKOUT source selection and divider as found on the
NXP Kinetis KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for NXP MCUX LPUART devices with separate IRQ lines for
transmit and receive status interrupts (e.g. the Kinetis KE1xF SoC
series).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a new clock control driver for NXP Kinetis SoCs that have the
Peripheral Clock Controller module (PCC).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This is placeholder for extended warning flags, likely to change between
toolchains.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This is placeholder for base warning flags, common to most toolchains.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The introduced macros are placeholders for the cmake parameter warning
level.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Without first triggering TASKS_STOP{RX,TX}, I observed that the UARTE
was never disabled when using device_set_power_state which resulted in
the HFCLK never being shut down and several hundred microamps in
unnecessary current consumption when idle. This seems to fix the issue.
Also added special treatment of uarte if CONFIG_UART_ASYNC_API is
selected. Note that the #ifdef isn't enough, since it's possible that
the option is set, but only one of the UARTs uses it.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
The mikroe_mini_m4_for_stm32 board is developed by Mikroelektronika
not by STMicroelectronics.
Also use more appropriate "mini-m4-for-stm32" board name for
compatible dt property.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
We replied to an ARP request that has the same Sender Hardware Address
than that of ours. Such an ARP request must be discarded, no reply
should be sent and translation table should not be updated.
Fixes#16110
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If a packet is received with Ethernet source address different
from ARP's sender hardware address field, then DUT must use the
latter address in response packets.
Fixes#16098
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The old footer was appended after PDU using pointer arithmetic. Now
the footer fields have been moved to the header struct, the
footer fields are now statically located in the data structure,
this is type safe and fields can be referred to by their actual
names rather than indirectly through reference to other members,
thus avoiding pointer arithmetic. Secondly, this change will pave
the way for adding other meta data in the future.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Enable the counter capability in the board and add a .conf file for the
nRF52810 running on the PCA10040 board.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The 'Bluetooth' menu contains just 'config BT' and its indented
children.
Remove one menu level by removing the 'Bluetooth' menu and turning BT
into a 'menuconfig' symbol. Also change the prompt from "Bluetooth
support" to just "Bluetooth", to make it consistent with e.g. "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This menu contains just the MCUMGR symbol and its children. Get rid of
one menu level by removing it.
Makes the 'External Sources' menu look like this:
HALs --->
Cryptography --->
[ ] Fnmatch Support
[ ] OpenAMP Support
(open-amp) OpenAMP library source path
[ ] mcumgr Support
('OpenAMP library source path' being visible there might be a separate
issue.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The supported field is used by sanitycheck to select which tests will be
run on a particular board. The issue with the counter drivers, and in
particular on nRF ICs, is that the timer peripherals are disabled by
default and need to be enabled on a per-board basis inside a .conf file.
Since this board doesn't have a .conf file in
tests/drivers/counter/counter_basic_api/boards/ the test cannot be run
on this board.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit adds basic support for nrf52811 in the arch SoC, dts
and nrfx folders.
The nRF52811 is a Bluetooth 5.1 Direction Finding SoC with comprehensive
protocol support.
The nRF52811 SoC is capable of the latest features of Bluetooth 5.1,
the most prominent being Direction Finding.
The radio in the nRF52811 SoC has comprehensive protocol capabilities,
including Bluetooth 5.1 Directing Finding, all Bluetooth 5 features,
802.15.4, Thread, Zigbee, ANT and 2.4 GHz proprietary.
It has 4 dBm TX power and has been optimized to offer the best RX
sensitivity of all SoCs in the nRF52 series.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Increase ram size as flash simulator need it for
emulated storage. The qemu_x86 flash size is puted back to
its original value of 4092K
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added basic tests for the NVS file system. One of the tests covers power
down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore any writes to the simulated flash memory after a certain number
of flash write calls has been executed. This behaviour is useful for
simulating power down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Aligned format specifiers for the NVS FS. Now, the format specifier
matches the variable type for qemu_x86 types.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Clear status bits before mapping them to the interrupt pin, so the
interrupt will occur on the next event instead of a pending event. Also
the status bits are cleared independently, because the threshold and
data ready functions can be enabled simultaneously.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Enabling and disabling the GPIO callbacks is error prone and unnecessary
since the trigger data is protected with a mutex, so it has been
removed. This resolves the following issues:
- The GPIO callbacks are not being re-enabled properly in the error path
of the trigger setting function.
- The device pointer used in the GPIO callback to retrieve the ADXL362
driver configuration data is the GPIO device not the ADXL362 device,
so this cast is invalid and the int_gpio field is garbage.
- There are potential timing issues between enabling interrupts and
re-enabling the callbacks.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
ieee802154_nrf5 checks if IEEE802154_DRIVER_LOG_LEVEL is set to debug
before initializing the "nRF5 rx stack". This leads to an undefined
reference error in case of the LOG module being disabled.
Avoids this behavior by using the LOG_LEVEL macro and setting it as
LOG_LEVEL_NONE in case of IEEE802154_DRIVER_LOG_LEVEL not defined.
Signed-off-by: Joao Cordeiro <jvcc@cesar.org.br>
By moving signals initialization to shell instance init function,
shell instance is ready to receive RX signals from backend before
thread is ready to handle them.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The filenames of the can drivers were not consisten.
Changed them to can_<dev name>
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit implements a CAN loopback device. This device is used
for testing when no CAN controller is available on the hardware.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Define DT_CAN_1_NAME as an empty string if it is not defined.
This is useful for buildtest where no HW is available.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
can_attach_workq is an isr wrapper that puts a work item into a workq
whenever a received frame matches the filter. With this function it is
possible to have a callback that is offloaded. This is useful if the
work is too complex for an isr or USERSPACE is enabled.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
can_attach_msgq can be implemented as a wrapper of can_attach_isr.
This is implemented as a common function for all drives and reduces
the complexity of the specific drivers. Since this is common to
multi instances of drivers too, it is removed from the API struct.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Send ZLP when host asks for a bigger length and the last chunk
is wMaxPacketSize long, to indicate the last packet.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
This fixes a corner case.
The ZEPHYR_BASE variable might be set in the environment at generation
time, but unset at build time. Save it in the cmake -E env calls to
scripts that need it.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
IWDG driver for STM32 doesn't support the callback parameter.
The patch adds necessary workaround for STM32.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
This commit adds J-Link runner for efr32_slwstk6061a board. To use it
it is necessary to install J-Link Software and Documentation Pack.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
During the write abort test, a second write is started then quickly
aborted. This means that the number of bytes sent is relative
to that second write. So when comparing it against the number
of bytes received which is NOT reset, the first (completed)
send of five bytes has to be accounted for. The current
nrfx implementations abort quick enough that no bytes are reported
sent, so this wasn't currently being exercised (i.e. the short
circuit of zero bytes sent was taken).
Tested on nrf52840_pca10056.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Libraries that use mbedTLS have been invoking
zephyr_link_interface(mbedTLS). It is not clear what the intent of
this code has been, but it is redundant with the mbedTLS build
scripts, so it can be safely removed.
In addition to being redundant, it causes problems as it introduces an
ordering dependency, with this code mbedTLS must be declared before
users of mbedTLS are declared. Since this code is redundant, this
ordering dependency is also unnecessary.
This code is believed to have been added early on by accident and
copied through cargo-cult programming since.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Current code implement CONFIG_MAX_PTHREAD_COUNT as the maximum number
of POSIX threads that can ever be created, rather than the maximum
number of active POSIX threads. Use pthread_state of struct posix_thread
to track the state of posix thread in posix_thread_pool so that we can
reuse the unused posix thread.
Fixes#15516.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Otherwise, it can lead to warning like:
main.c:80:10: warning: format '%d' expects argument of type 'int',
but argument 2 has type 'socklen_t' {aka 'long unsigned int'}
[-Wformat=]
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Change the SimpleLink wifi driver to use static IP address instead of
DHCP when it is set by NET_CONFIG_MY_IPV4_ADDR. We also support setting
gateway and netmask via NET_CONFIG_MY_IPV4_GW and
NET_CONFIG_MY_IPV4_NETMASK.
This feature is tested out-of-tree against the echo sample after
modifying its prj.conf file to set the static IP address:
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.168.1.191"
and after commenting out these lines in its board-specific config
file for cc3220sf_launchxl:
so that the NET_CONFIG_SETTINGS are not overridden.
The wifi sample is also verified to run correctly after running the
echo sample.
Fixes#14588
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Delete memory-related configs from defconfig and use device tree based
macros in general riscv32 linker script instead of Kconfig ones.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Use values generated from the device tree in RISCV_ROM_BASE,
RISCV_ROM_SIZE, RISCV_RAM_BASE, RISCV_RAM_SIZE macros.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Use values generated from the device tree in RISCV_ROM_BASE,
RISCV_ROM_SIZE, RISCV_RAM_BASE, RISCV_RAM_SIZE macros.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Synchronising the init procedure to initialise the mesh
state only after the settings have been loaded.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
After receiving Generic Level Move set/set_unack message, generic
level state should move towards positive or negative extreme end
(which is depend upon sign of delta value) till it not get interruped.
This commit has introduced this feature.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If Node Lightness is in downward transition & received Generic
onoff message to set state equal to 1 then Node transaction get
stopped in between. Ideally it should reach to default lightness
value if it is non-zero. This commit has solved this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit upgrade the implementation to reduce complexity in
algorithm. Previously there was different timers for lightness
as well as temperature transitions. But at time only single
transition is remain activated & hence there is no need
of multiple timer for each entiity.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Create a new dedicated section for west installation that details
some of the finer aspects of the process and steps involved.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This file was previously located in the west repository, under scripts/.
Since it now includes knowledge about specific behavior ef zephyr
extension commands, we move it here after overhauling it completely.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
sntp_simple() function queries the server (passed as "addr[:port]"
string). It wraps calls to a number of other functions, and may be
useful to write simple, concise apps needing the absolute time.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two utils to manipulate addresses in format "addr[:port]". I.e.,
network address (domain name or numeric), optionally followed by
port number:
* net_addr_str_find_port(), to return pointer to port number
substring (or NULL if not present).
* net_getaddrinfo_addr_str(), which is effectively getaddrinfo()
wrapper taking a "addr[:port]" string as a parameter.
The header file is named socketutils.h to emphasize that these
utility functions are implemented on top of BSD Sockets API
(and other POSIX/ANSI C functions), and thus portable to other
POSIX systems (e.g., Linux), so can be used in apps testing
POSIX compatibility. More utility functions (beyond address
manipulation) can be added later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Not in POSIX. Linux man getnameinfo says about it:
"In order to assist the programmer in choosing reasonable sizes for
the supplied buffers, <netdb.h> defines the constants
#define NI_MAXHOST 1025
#define NI_MAXSERV 32
Since glibc 2.8, these definitions are exposed only if suitable
feature test macros are defined, namely: _GNU_SOURCE, _DEFAULT_SOURCE
(since glibc 2.19), or (in glibc versions up to and including 2.19)
_BSD_SOURCE or _SVID_SOURCE."
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Bits are actually shifted by filter number instead of bank number.
This results in wrong mode and filter_index calculation.
Fix shifting of mode bits by using bank_number instead of filter_number.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Calling functions like `net_if_start_dad`, `join_mcast_nodes` or
`net_if_start_rs` lead to L2 API function calls, which is not correct
for offloaded interfaces and leads to a crash. This is especially
problematic, as they are called in the default configuration.
Avoid calling these functions while an offloaded interface is brought up
by adding extra jump label.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case socket offloading is used, one might want to disable native IP
stack, both IPv4 and IPv6, to save memory. Currently it is not possible
due to preprocessor check. Prevent that by adding additional exception
for socket offloading.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
add usbd1 definition to rt dts file,
set EHCI controller config default value in rt1050 default config file,
add EHCI controller driver MACROs to dts_fixup.h,
initialize EHCI clock in rt soc.c
add HAS_MCUX_USB_EHCI for supported soc in Kconfig.soc
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
usb_dc_mcux_ehci driver is one shim of the NXP SDK ehci driver.
select NOCACHE_MEMORY if HAS_MCUX_CACHE
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Interface Association descriptor has to be used with Windows 7.
Add CONFIG_CDC_ACM_IAD option to force its usage, disabled by default.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Added .inf driver file for Windows.
CDC examples will now work on Windows.
Note:
This .inf is not signed and may cause problems during installation.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
This commit enables internal SoC DC-DC converter on efr32_slwstk6061a
board.
RF components on efr32_slwstk6061a board are connected to the internal
SoC DC-DC converter. Upon startup the DC-DC converter is configured in
the bypass mode. Such configuration provides enough power for the SoC to
boot and perform basic operation. It is not enough however to operate
the radio subsystem. Without this patch enabling radio in Rx or Tx mode
causes voltage drop and triggers brown out detector reset.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
- Add examples for the latter.
- Point at each other and highlight how independent they are from each
other.
- State their inputs and outputs in plain English.
- Fix "git describe" error message giving the wrong impression that
everyone cares about BUILD_VERSION. Only the boot banner cares now.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Hex firmware file is convenient in some scenarios, like
generating signed firmware with `west sign`. So, enable
generating hex file.
Signed-off-by: Jun Li <jun.r.li@intel.com>
In non-secure Trustzone application dedicated flash non-secure
partition are used instead of regular one, which become secure
partition in Trustzone collaboration model.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The two branches of the compile-time conditional are identical, so
they are consolidated and the conditional removed.
Just hygiene again. No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is just hygiene. Some preprocessor logic is optimized, eliminating
a temporary (_NON_OPTIMIZED_TICKS_PER_SEC) in the process.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Macros and enums are included for supporting pin configuration
settings.
Entries to the dts_fixup were also included in order
to configure port level settings.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Adds a new xec gpio driver that can be used with the
XEC MCUs. This driver modifies the PCR1 register in order
to configure gpio settings. Interrupts are triggered by the EC
interrupt aggregator block.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Dts Nodes for all the GPIO portswere defined. In addition,
a new binding file was created for the gpio driver.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Expose MEC1501 5 I2C/SMB controllers
Add Microchip specific I2C device tree properties
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Hook up SERCOM1 to I2C, it is connected to the EXT3 header and
the EDBG embedded debugging interface.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
The only use of the BOOTLOADER_UNKNOWN config option is on x86, where
it controls whether a multiboot header is embedded in the output.
This patch renames the option to be more descriptive, and makes it
an x86-specific option, rather than a Zephyr top-level option.
This also enables X86_MULTIBOOT by default, since the header only
occupies 12-16 bytes of memory and is (almost always) harmless.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Commit 11295c1 added Kconfig options for interrupt mode, but then hard
coded the interrupt mode. This commit uses the Kconfig option to set
the interrupt mode.
Applications expecting the interrupt mode to be something other than
the default will need to be updated.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The default case of the switch statement jumps over the unlocking of the
trigger mutex. This has been fixed with more granular locking which has
the added benefit of being more explicit about what is being protected.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The upper limit of the timeout should not be 0.
tests/drivers/watchdog/wdt_basic_api checks for this and fails as the
driver currently only checks that the timout does not exceed the upper
bound.
This also makes it check the lower bound, so that the test passes.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
* KERNEL_ELF was easily confused with KERNEL_ELF_NAME and KERNEL_NAME.
* kernel_elf as the name of the binary indicates it somehow only
contains the kernel, which is not correct.
Rename to zephyr_final as this is the reality: Zephyr elf has been
linked again (a number of times) due to generated kernel files.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Commas are not allowed in this file and prevent parsing by github
Error introduced in
7c7db00a77Fixes#15998
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix issue where sanitycheck wrongly assumed tests inside ZEPHYR_BASE
to be outside ZEPHYR_BASE and dropped the prefix in their name. This
happened when:
- ZEPHYR_BASE contains symbolic link(s), and
- relative --testcase-root argument(s) are passed
To generate unique names, TestCase.get_unique(testcase_root) first
checks whether "testcase_root" starts with ZEPHYR_BASE. Either may or
may not include symbolic links so both must be canonicalized before
comparison. While fixing this method, replace explicit forward slash
"/" and string replace with os.path.relpath() and make a couple other
simplifications and minor pydoc fixes.
Add new canonical_zephyr_base = os.path.realpath(ZEPHYR_BASE) constant
and corresponding comments and guidelines.
The most visible effect of this mismatch was sanitycheck dropping the
--testcase-root prefix from the unique name of tests inside
ZEPHYR_BASE. This means some test names could be not unique anymore
and silently overwrite each other's results, example:
bash# cd zephyr_dir_with_symlink; export ZEPHYR_BASE=$(pwd)
./scripts/sanitycheck -T samples/portability/cmsis_rtos_v1 \
-T samples/portability/cmsis_rtos_v2
The more systematic and practical consequence (and how I actually
found this) was test outputs landing in unexpected locations.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If top value is different than maximal top value (24 bits) then
wrapping must be handled. There are 2 ways to handle that:
- in software, by clearing the counter in the interrupt
- by HW, using (D)PPI which connects compare event with clear task
First option was already implemented but it has accumulative error.
Added PPI option which requires 1 PPI channels but has no accumulative
error.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Relates to #15366.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the encryption setup queueing implementation to avoid
overlapping with local initiated Length Update Procedure.
Fixes#15733.
Relates to #15335, and #15186.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The ADC driver in this PR has been tested working on these nucleo
boards, so ADC support is added to the boards doc.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Some configuration for the boards have to be added into test_adc.c file
so user can test driver with the test cases. Several nucleo boards are
added including F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG.
And also ADC dts and pinmux configuration are added into boards own
pinmux.c and dts file.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This commit adds driver support for ADC1 on all 8 supported series of
stm32 with resolution and conversion time selection and calibration.
Currently DMA is not supported for all series, and without it, zephyr
won't be able to catch up ADC's end of conversion interrupt, so this
version of the driver supports one channel conversion only. Users want
multi-channel conversion should use multiple sequences in their app
code.
This driver uses LL lib rather than HAL because the current HAL lib for
ADC will call HAL_DMA_* functions rather than using zephyr's common DMA
interface, so that way the driver will break the consistency of the
code.
This driver has been tested on multiple nucleo boards including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG and all
passed the test cases in tests/drivers/adc/adc_api. If the external ADC
line is floating, it may fail the tests since ADC may get 0V and the
test cases think 0 is failing. Connect it to any voltage source between
0-3.3V will help passing the test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This commit adds pinmux defines for all the external ADC lines
supported by stm32. All defines are named after the datasheet of the
corresponding product lines.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
All series of stm32 have at least one ADC instance and this commit adds
one ADC node to the root dts file of each soc, and also adds fixing up
mappings to them.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Let allow users to select the revision B of the chip on the SAM E70
Xplained Board. The same board exists with SoC revision A or B.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The revision A and B of the chip are very close, so most of the code
will work if the wrong revision is selected. To avoid that, check that
the selected HAL and the chip CIDR match. Otherwise emit a warning
in the logs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds support for the revision B of the SAM E70 SoC. It adds
all the rev B part numbers, and when users pick-up one of those part
numbers, the revision B HAL is used instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is an import of Atmel SAM E70 HAL version 2.3.98, for the revision
B of the chip. The files have been passed through dos2unix to minimize
the differences with the revision A which seems to also have been
imported that way.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At the moment there are two images for Nucleo-64 STM32 family board
connectors (img/nucleo_xxxxxx_connectors.png).
The images have the same canvas size (800x619) but different file
size in bytes and different color coding.
The first one (192K, 8-bit colormap) is used for
* nucleo_f070rb
* nucleo_f091rc
* nucleo_f103rb
* nucleo_l053r8
* nucleo_l073rz
The second one (464K, 8-bit/color RGBA) is used for
* nucleo_f030r8
* nucleo_f302r8
* nucleo_f334r8
Applying simultaneous black/white threshold to the images and
comparing them with imagemagick tools shows that the images
have no significant difference. Therefore we can use
nucleo_l073rz_connectors.png for nucleo_f030r8, nucleo_f302r8
and nucleo_f334r8.
Please see https://github.com/zephyrproject-rtos/zephyr/pull/15926
for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Add a sample application for showcasing the functionality of the
Holtek HT16K33 LED driver with keyscan functionality.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit adds support for the keyscan functionality of the HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Allow a device tree node to be child on one bus and parent on another
bus (e.g. an I2C slave device with multiple sub-devices).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The HT16K33 is a memory mapping, multifunction LED controller
driver. The controller supports up to 128 LEDs (up to 16 rows and 8
commons) and matrix key scan circuit of up to 13x3 keys.
This commit add support for the LED driver functionality of the
HT16K33.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Unfortunately, Zephyr SDK 0.10.0 ships with outdate Newlib 2.0.0
(from 2015 or earlier) which lacks sys/_timeval.h header, requiring
ugly workaround of defining struct timeval inline (the whole idea
was to standardize on sys/_timeval.h header for different libc's).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
According to POSIX, that's the header which defines this function.
Similarly, nothing in POSIX indicates that <time.h> should have
access to struct timeval, so it's removed (it's made accessible
to <sys/time.h> via <sys/_timeval.h> introduced earlier).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is implementation-level header which defines struct timeval, and
intended to be included by headers which need this structure. This
implementation scheme is compatible with Newlib, and thus provides a
step to use minlibc vs Newlib interchangeably.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Move PROPERTY_LINKER_SCRIPT_DEFINES to toolchain_ld_base.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
gpio-map is a property of "nexus node", defined in dts v0.3.
It allows to describe a pin connector so it can be referenced
through phandles and hence used in expansion device nodes like a
shield header (typically implemented through overlays).
This change implements gpio controller resolution through these maps.
Few assumptions were taken in order to simplify the implementation.
These assumptions bring some limitations to the use of gpio-map
but my understanding is that this should still allow to cover most
use cases.
Assumptions:
-gpio-size is the same for all gpio-controllers referenced in a map
-optional properties gpio-map-mask and gpio-map-pass-thru are
supposed to be omitted
The understanding of this last assumption is that flags provided in
the expansion device node will overwrite the connector flags.
In a latter stage, when need happen, these limitations can be
revisited to unlock fully fledged gpio-map usage.
Fixes#15637
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some applications using DMA, such as UART RX, could
need to complete the current DMA transaction earlier than
predefined, based on other termination conditions,
like UART's IDLE interrupts.
In that case, the client needs to know how many data are
still left in DMA transfer buffer so that it can figure
out how many data has been transfered. However, the current
DMA API doesn't provide any information for the client
to learn the transfer buffer information.
And some other information, like whether DMA transfer is busy
or not, transfer direction, etc, could interest a client.
So, added a dma API function to retrieve the current DMA
runtime status.
And implemented the API for STM32F4's DMA while keeping
others unimplemented.
Signed-off-by: Jun Li <jun.r.li@intel.com>
reload function is not implemented by every DMA driver.
So, add api's NULL check to make sure it is protected if not
implemented.
Signed-off-by: Jun Li <jun.r.li@intel.com>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The ARM Cortex-M Exception Stack Frame (ESF) may consist of
several stack frame contexts (basic state context, additional
state context, FP context, etc.). To reflect these structural
properties, this commit re-factors the ESF, splitting out the
basic stack frame, holding the state context, into its own
struct container. The commit does not introduce behavioral
changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the local node keeps getting bombarded with messages, it's possible
that the storage timer gets rescheduled over and over again and never
expires. Add the necessary code to only reschedule the timer if the
new deadline is earlier than an existing one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The default values for the timeouts, as well as non-defaults in most
Mesh samples, use a higher value for the RPL than then generic mesh
storage timeout. This hasn't had any effect in practice since the code
only uses the RPL timeout if it is *smaller* than the generic one.
The original intention of the code was to use the RPL timeout,
regardless of what the generic one is, whenever the RPL is the only
thing that needs updating. Add some helper macros to track the various
groups of pending flags, and perform the appropriate checks to apply
the RPL timeout whenever it's smaller than the generic timeout, or if
there are no other items to store besides the RPL.
Fixes#15904
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When run as "west -v build", make sure that the underlying build tool
is run in verbose mode as well (if the generator is known to support
it, which is the case for Unix Makefiles and Ninja based generators).
The per-generator hacks here are needed to support CMake 3.13. If we
move to CMake 3.14 or later, we can just run "cmake --build BUILD -v"
and be done with it.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Fixed format error when compiling with gcc and newlib.
Used standard formats (%u) instead of inttypes formats (PRIxxx)
since Zephyr redefines the standard formats, that way it should always
be in line with the Zephyr types.
Compiled with and without newlib using gcc.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
This adds interrupt support to the SAM0 GPIO driver. This is heavily
inspired by @nzmichaelh work in #5715. The primary difference
from that implementation is that here the External Interrupt
Controller (EIC) is separated out into an interrupt controller driver
that is less tightly coupled to the GPIO API. Instead it implements
more of a conversion from the EIC's own odd multiplexing to a more
traditional port and pin mask IRQ-like callback. Unfortunately,
through the EIC on the SAMD2x are relatively well behaved
in terms of pin to EIC line mappings, other chips that share the
peripheral interface are not. So the EIC driver implements a
per-line lookup to the pin and port pair using definitions extracted
from the ASF headers.
The EIC driver still makes some assumptions about how it will be used:
mostly it assumes exactly one callback per port. This should be fine
as the only intended user is the GPIO driver itself.
This has been tested with some simple programs and with
tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an
adafruit_trinket_m0 board.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This adds a SERCOM I2C driver for SAM0 series chips.
Tested with a SAMD21 chip on a SSD1306 display and a MLX90393
sensor. Only compile tested for SAMD20 and SAMR21.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This adds generic support for any board using the SAM0 ADC driver.
The test selects the internal input from the scaled I/O voltage,
which is always available on the ADC.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
It is possible that the device driver API pointer is null.
For example if the device driver returns an error, the device
code will make the API pointer NULL so that the API would not
be used. This can cause errors in networking code where we
typically do not check the NULL value.
Fixes#15003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- renaming functions to better names
- reordering functions place (register, then unregister for instance)
- centralizing logs to relevant place
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, there is no need for unspecified address bit. If specified address
bit is not set, then it will be obvious address is unspecified. Reducing
the amount of bits from 6 to 4.
This permits to reduce net_conn structure of 4 bytes. Its size is as
before indroducing node attribute.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will optimize path when unused an connection is required or when
looking up a used one.
That said, at this stage, it bloats up the net_conn structure with 4
added bytes. More optimization will overcome this drawback.
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of present #ifdef can be removed via using IS_ENABLED() macro.
Only small part of cache related logic still require #ifdef.
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
During net_pkt/net_context API changes, some ip handling blocks were
ordered ipv4 first, ipv6 second. While it is the contrary everywhere
else. So reordering to get things consistent.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Not all #ifdef can be removed: those which have a dedicated attribute
in struct net_context.
- For CONFIG_NET_CONTEXT_CHECK: switching the NET_ASSERT_INFO to
NET_DBG (simpler to read and anyway an error code is returned)
Fixes#8725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will help to use IS_ENABLED in place of #ifdef in relevant place.
Only struct net_if uses this structure.
In case only IPv4 is used, it will bloat up this struct by 12 bytes.
There are few reasons why this is "ok" in this case:
- On limited rom/ram system it will be unlikely to find a lot of
network interfaces so it should not harm much to raise the size of
struct net_addr.
- If IPv4 is the only enabled IP version, it gains a good amount of
rom/ram to discard IPv6 support so it is fine to steal a bit of this
gain to bloat up a bit struct net_addr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Thit will help removing usage of #if defined(CONFIG_NET_OFFLOAD) in
relevant places.
Note that static inlines are used instead of #define foo(...), to keep
the parameter check at build time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Partially revert commit ea177e785c
("usb: dfu: set bwPollTimeout dynamically")
Introduced fix does not work proper because there is no way to be
sure that a control stage had success before start erase process.
Instead IMG_ERASE_PROGRESSIVELY configuration should be used
if the erase of the flash takes longer time.
resolves: #15497
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The Holyiot YJ-16019 board is a small, coin cell driven board based on
the Nordic Semiconductors nRF52832. It provides one LED and one push
button.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Zephyr implementation of OpenThreads utilsFlashErasePage platform
function did not disable flash protection before calling `flash_erase`
function. This resulted in an error instead of actual flash erase on
platforms that properly implement flash write protection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This reverts commit bd24b31139.
While the test case failure described in #14186 is associated with the
cycle-based busy-wait implementation, that test is fragile, and fails
less frequently once the incongruence between ticks-per-second and the
32 KiHz RTC clock are resolved. It also assumes that the system clock
is more stable than the infrastructure underlying the the busy-wait
implementation, which is not necessarily true.
The gross inaccuracies in the standard busy-wait on Nordic described in
issue #11626 justify restoring the custom solution.
As this applies to all Nordic devices, move the setting to the top-level
Kconfig.defconfig.
See: https://github.com/zephyrproject-rtos/zephyr/issues/11626#issuecomment-487243369
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The default system clock on all Nordic devices is based on a 32 KiHz
(2^15 Hz) timer. Scheduling ticks requires that deadlines be specified
with a timer counter that aligns to a system clock. With the Zephyr
default 100 clocks-per-sec configuration this results in 100 ticks every
32700 ticks of the cycle timer. This reveals two problems:
* The uptime clock misrepresents elapsed time because it runs 0.208%
(68/32768) faster than the best available clock;
* Calculation of timer counter compare values often requires an integer
division and multiply operation to produce a value that's a multiple
of clock-ticks-per-second.
Integer division on the Cortex-M1 nRF51 is done in software with a
(value-dependent) algorithm with a non-constant runtime that can be
significant. This can produce missed Bluetooth deadlines as discussed
in upstream #14577 and others.
By changing the default divisor to one that evenly divides the 2^15
clock rate the time interrupts are disabled to manage timers is
significantly reduced, as is the error between uptime and real time. Do
this at the top level, moving SYS_CLOCK_HW_CYCLES_PER_SEC there as well
since the two parameters are related.
Note that the central_hr configuration described in upstream #13610 does
not distinguish latency due to timer management from other
irq_block/spinlock regions, and the maximum observed latency will still
exceed the nominal 10 us allowed maximum. However this does occur
much less frequently than changing the timer deadline which can happen
multiple times per tick.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Inside function test_net_pkt_basics_of_rw result of function call
net_pkt_read_be16 is not checked which might result performance
of the program and cause errors.
Coverity-CID 198003
Fixes#15776
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Making a clean slate for a pylint test in CI.
'_' is a common name for non-problematic unused variables in Python.
pylint knows not to flag it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Szymon is no longer actively looking at Bluetooth code, whereas Joakim
from Nordic has been assigned for Bluetooth host support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a follow up to commit 0eaa5e53a3.
`HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE` is a base number for two PPI
channels, so two bits need to be marked in the used channel bit mask.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This make use of NET_IF_NO_AUTO_START flag so Bluetooth interfaces are
not automatically enabled after initialized.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix calling bt_gatt_foreach_attr with start handle parameter set
to last static attribute handle.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Within the past few days, an update to the Ubuntu 18.04 toolchain has
begun emitting code sections during link that are messing with our
stub generation. They are appearing in the 32 bit stub link despite
not being defined in the single object file, and (worse) being
included in the output segment (i.e. at the start of the bootloader
entry point!) despite not being specifically included by the linker
script. I don't understand this behavior at all, and it appears to be
directly contrary to the way the linker is documented.
Marc Herbert discovered this was down to gcc being called with
--enable-default-pie, so -no-pie works to suppress this behavior and
restore the default. And it's correct: we aren't actually generating
a position independent executable, even if we don't understand why the
linker script is being disregarded (to include sections we don't
include). See discussion in the linked github issue.
Fixes#15877
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
k_stack_alloc_init() was creating a buffer that was 4 times
too small to support the requested number of entries, since
each entry in a k_stack is a u32_t.
Fixes: #15911
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Moves the flash memory definitions from Kconfig to device tree for the
rv32m1 ri5cy and zero-riscy cores.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Moves the sram memory definitions from Kconfig to device tree for the
rv32m1 ri5cy and zero-riscy cores.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The west build --help output no longer fits in a single page. Move
details and examples into the documentation, so the -h output doesn't
require scrolling around.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Analogously to the Make options with the same names, these print the
commands which would have run without running them.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Adjust them so "west build -v" prints ZEPHYR_BASE and any CMake
commands, but none of the other more esoteric bits of information.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This can be used to override the default CMake generator
permanently. Its values are the same as those acceptable to cmake's -G
option.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Try to make the language simpler. Introduce each example with a
paragraph that says "To <DO XYZ>" to make them easier to find.
Move the config options to the documentation for that command to make
them easier to find.
Add some more examples for use cases we've gotten questions about.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Respect the BOARD environment setting.
- Don't require --force if the board can't be figured out: it might be
set in CMakeLists.txt, for example. Instead, downgrade to a warning
which can be disabled with "west config build.board_warn false".
- Add a build.board configuration option used as a final BOARD fallback
after CACHED_BOARD (in the CMake cache), --board (command line), and
BOARD (environment).
- Keep the config docs up to date.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- This script didn't get fixed when cmake.py was renamed zcmake, so it
won't run; fix that.
- Change the default format string to '{name}' to keep things simple
- Flake8 lint
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Adds a new argument to the openocd runner to optionally specify the
config file. Updates the rv32m1_vega board to use different openocd
config files for the ri5cy and zero-riscy cores.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Introduces a new rv32m1_vega board configuration for the zero-riscy
core. It assumes that the soc has been reconfigured with openocd to boot
to the zero-riscy core instead of the ri5cy core.
Refactors the board-level device tree so the ri5cy and zero-riscy
configurations share common definitions for the led, button, and sensor
nodes.
Tested with:
- samples/hello_world
- samples/synchronization
- samples/basic/blinky
- samples/basic/button
- samples/sensor/fxos8700
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors peripheral addresses, clocks, and compatibles from the ri5cy
core dtsi into a common soc dtsi, then attaches interrupts in
core-specific dtsi files.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The zero-riscy core on the rv32m1 soc does not implement hardware loop
extensions and thus should not enable RISCV_SOC_CONTEXT_SAVE, however it
does still need access to the EVENTx_INTPTPENDCLEAR symbol which comes
from GEN_SOC_OFFSET_SYMS().
Split out the soc offset symbols into a separate config so we can enable
them without enabling soc context saving.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Both the ri5cy and zero-riscy cores in the rv32m1 soc use the same
source clock, so we don't need to conditionalize
SYS_CLOCK_HW_CYCLES_PER_SEC on the ri5cy core.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
CI always runs after new PRs are merged into master. Report failures to
mailing list to get more attention if master fails to build.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Due to a protracted merge of:
5e38ed9320
the naming for the HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI changed
semnatics, now requiring use of
HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement OpenThreads frame pending bit management on top of the Zephyrs
radio driver API. This allows for proper Sleepy End Devices handling
from the parent side.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement newly introduced `configure` API for nRF 802154 radio driver.
Increase maximum number of slots for Frame Pending bit information in
the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
License link provided in stm32cube abstract packages was not
reflecting the actual license in use for these packages.
Update the link to BSD 3-Clause official.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The stm32_min_dev board blue/black variant support USB device,
but the usb node removed by merge PR #15245, so add it back.
Signed-off-by: Harry Jiang <explora26@gmail.com>
Remove deprecated headers:
- crc8.h
- crc16.h
- crc32.h
We now have one header only serving crc:
- crc.h
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mark the PPI channels and groups used by the Bluetooth controller
as occupied and thus unavailable for allocation through nrfx_ppi.
Add also a build time assertion that checks if these PPI channels
do not overlap with those assigned to the pwm_nrf5_sw driver
(to replace the comments in this driver that were supposed to warn
about this threat but had in fact little chance to be read by users).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Mark the PPI channels used by the pwm_nrf5_sw driver as occupied
and thus unavailable for allocation through nrfx_ppi.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Disable the unsupported controller privacy feature in the
ULL/LLL split architecture implementation.
This feature will be enabled in the future when it has been
ported to support multiple vendor SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the support for Zephyr HCI Vendor-Specific Commands
and Event in the ULL/LLL split architecture implementation
of the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly defined Rx and Tx buffer sizes. Wrong
calculation allocated more memory than necessary.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig default values for ULL and LLL execution
priorities that caused build warnings when ranges changes
based on other priority values being selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect data type used in calculation of slot_us
detected by compiler, and reported as possible integer
overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect conditional compilation that caused compile
error when lll_scan structure did not contain connection
context included which is needed only for central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Return -EAGAIN on k_sem_take() failure to take write lock, the error
code is similar to nrfx write_in_progress flag.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds required Kconfig options for flash driver.
Adds FatFS filesystem for flash disk.
Fixes#14459.
Note: As USB MSC does not support multiple disks (see #14937),
only one (flash by default, modify CONFIG_MASS_STORAGE_DISK_NAME
to "RAM" for RAM disk) will appear to host.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The UARTs are on the SoC, not the board, so move their descriptors
to the SoC-level. Also turn on auto IRQ detection as these are PCI-
attached and their IRQs are subject to change depending upon firmware
settings.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
If a UART is configured with IRQ == PCIE_IRQ_DETECT, then use the
pcie_wired_irq() to determine the IRQ at runtime, and install the
handler using the dynamic interrupt mechanism.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The per-UART configuration is boilerplate that is becoming a maintenance
nightmare as it grows. A template file is created, and instances are
created as needed by cmake at build time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Firmware is supposed to set a register in PCI configuration space which
indicates the hardware IRQ that the endpoint is attached to.
A function is implemented which reads this register, and the PCIe shell
is updated to use it instead of doing it "manually".
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
I'm the de-facto maintainer of all things Apollo Lake these days,
and the Apollo Lake begins with the up_squared.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Notably fix the wrong comment I added in commit 6f011c95c4: when
testing with QEmu sanitycheck does _not_ spawn QEmu; it relies on "make
run" instead.
Searching the code for "Spawning" now cycles directly to all the places
starting processes and threads.
- Sample -v -v verbose output (lines wrapped for commit message check)
Spawning QEMUHandler Thread for \
qemu_x86/samples/hello_world/sample.helloworld 'make run'
- native_posix example:
Spawning process /home/.../sanity-out/native_posix/\
/samples/hello_world/sample.helloworld/zephyr/zephyr.exe
Spawning BinaryHandler Thread for native_posix/\
samples/hello_world/sample.helloworld
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fixes the compile errors in various platforms like:
* sam_e70_xplained (too few network buffers)
* galileo, cc3220sf_launchxl and mps2_an385 (missing random number
generator configuration options)
Fixes#15878
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since west's main.py relies on the args tuple with the returncode
and the cmd, create the CalledProcessError using the correct
positional args.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The TI CC1352R LaunchPad (LAUNCHXL-CC1352R1) is a development kit that
features the CC1352R SoC.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The TI CC26x2R LaunchPad (LAUNCHXL-CC26X2R1) is a development kit that
features the CC2652R SoC.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Add initial support for the TI CC13x2 / CC26x2 series with the CC2652R
and CC1352R SoCs. The UART and GPIO peripherals are supported. Drivers
use the driverlib HAL from the TI CC13x2 / CC26x2 SDK.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The default customer configuration (CCFG) provided by the
TI CC13x2 / CC26x2 SDK puts the configuration in a section different
than expected by Zephyr. It has been modified to use the appropriate
section.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Add low level drivers (driverlib) and RF patches from the TI CC13x2 and
CC26x2 SDK. These sources have been added unmodified with the exception
of converting DOS to UNIX line endings.
The majority of these APIs are available in ROM and inclusion of the
headers will map functions that are not inline to the ROM versions.
Origin: Texas Instruments SimpleLink CC13x2 and CC26x2 SDK
License: BSD 3-Clause
URL: http://www.ti.com/tool/simplelink-cc13x2-26x2-sdk
Purpose: Provides HAL for TI CC13x2 and CC26x2 SoCs
Maintained-by: External
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The '#if XIP' in the DTS file never worked properly,
causing the QEMU build to think it has much more RAM
then it actually has. If RAM overflowed, this would not
be caught by the build, instead there would be strange
crashes when the data copy takes place.
The QEMU targets themselves are not XIP, everything
is actually RAM, but the first 4 megabytes are
considered to be a memory-mapped flash region. This
is done to ensure that the XIP data copying infrastructure
doesn't bit-rot on x86. We are at the point where
a lot of things depend on this, so just select it in
the board Kconfig instead of enabling in the
defconfigs.
Fixes: #15835
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test uses ztest anyway, the default should be fine
just like any other test running under ztest.
k_thread_create() uses a lot of stack, and the main
stack size is very small if ztest is enabled. Do it in
another ztest task instead.
We don't need to mess with the main thread's priority,
just have the alt thread run cooperatively.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are just at the knife edge with 512, with stack
overflows being observed with stack canaries enabled.
Given the special case for the idle thread stack size
on this arch, seems reasonable to increase it here
for that arch.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a new "boards" command that is able to list all the boards in the
upstream tree. There is currently no support for out-of-tree boards.
The command executes cmake to use the built-in CMake script,
boards.cmake, to list the boards, and then stores the information
retrieved and allows the user to present it in a user-definable format.
Fixes https://github.com/zephyrproject-rtos/west/issues/53
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the existing CMake and build functionality from the west repository
to zephyr. The rationale behind this move is that it's very tightly
coupled with the Zephyr build system and is only used by the extension
commands implemented in the zephyr tree.
If additional extension commands in third-party repos want to use the
functionality they can add $ZEPHYR_BASE/scripts/west_commands to the
Python system path.
The implmentations in the west repo will be deprecated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix "arduino_i2c not found" issue, similar to #13708
Add arduino interfaces in dts to board nrf52_10040
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Fix set configuration request for a configuration without
specific endpoint like USB DFU class.
The changes introduced in commit 2b58594e90
("usb: device: Use set_endpoint helper for set_config")
does not take into account that a configuration could only
contain control endpoint.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
When some header are included into C++ source file, this kind of
compilations errors are generated:
error: invalid conversion from 'void*'
to 'u32_t*' {aka 'unsigned int*'} [-fpermissive]
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570, and #15727.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enables BT_CTLR if BT is enabled, connects shell-uart to uart0,
and enabled NRFX uart driver by default.
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
Initialize the Floating Point Status and Control Register when in
Unshared FP Registers mode (In Shared FP Registers mode, FPSCR is
initialized at thread creation for threads that make use of the FP).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the activation of the FP context
in ARM system boot. There is no need to do this, since
the FP context will be activated in the presence of
floating point instructions. We update the reference
documentation accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not sharing the
FP context among different threads, so we do not need to
include the FP high registers bank in the thread.arch
container.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not stacking the
FP context in exception entries, so we do not need to
include the FP registers bank in the exception stack
frame structure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under unshared FP registers mode the FP register bank is
meant to be used by a single thread context. Therefore,
there is no need for automatic stacking of the FP register
bank at exception entries, or context switch, as the
registers are not expected to be shared among multiple
contexts.
Under unshared FP registers mode we only need to clear the
FPSCR register once, before jumping to main(). However, we
initialize the FPSCR already at boot in case FP operations
need to be performed during boot.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARM builds with FP services (CONFIG_FLOAT=y) but without user
mode support (CONFIG_USERSPACE=n) we do not need and should not
enable full-access to the FP co-processor. Instead, we should
enabled access by privileged code only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
On some systems where you don't have access to `PATH` and you can't
set the `ENV{PATH}` variable. You need to be able to pass the path
to the west executable down to the python script so it is better
for it to be set explicitly than assuming that it exsists as a
part of the PATH/executables in the shell being called.
Signed-off-by: Sigvart M. Hovland <sigvart.hovland@nordicsemi.no>
Implementation of pinmux for the stm32mp157c_dk2 board.
Some UART pin mux definition has been added (mainly for
UART console and UART/SPI Arduino shield support).
This can be completed with pin mux for other stm32mp157c
UART.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support for stm32mp1 basic UART API with Zephyr.
UART Console and UART shell are also supported.
Async UART API and USART support is to be done.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
net_if_ipv6_calc_reachable_time() requires sys_rand32_get().
Enable the test random number generator so the build doesn't
fail.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Inside void main(void) result of function sensor_trigger_set() is not
checked which might result that function can't set sensor type
and that error can't be handled.
Coverity-CID: 186196
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Move SERCOM peripherals to use the raw defines generated from DTS
parsing. This adds aliases to the DTS so that the SERCOM number
can still be used for clocking and pinmux.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Increase the resolution of advertising random delay from
1 ms unit to 1 ticker unit.
Relates to #10289, #10391, and #10398.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to the Apple iBeacon spec chapter "2.1 Advertising Packet",
"beacons must use a non connectable undirected Advertising PDU,
ADV_NONCONN_IND". Refer to https://developer.apple.com/ibeacon/
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Added prompt to BT_CTLR_RX_PRIO_STACK_SIZE, allowing vendor specific
configuration of high priority Rx thread stack size for
!SOC_COMPATIBLE_NRF.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix XTAL advanced feature by adding the missing
implementation to calculate and, retain or release the XTAL
clock source after a Bluetooth state or role is stopped.
Fixes#15817.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to toggle GPIO Debug pins on HFCLK
request and release by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement a lower ISR latency ULL processing design. Instead
of looping use ISR/mayfly tail-chaining to process
successive ULL messages.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented ULL to yield from processing in an infinite loop
if current PDU being handled is deferred.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a check in the jlink runner to look for the jlink executables and
print a more useful error message if they are not found.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds support for the SAM0 DMA Controller (DMAC). Chained
transfer are not currently implemented.
Tested with tests/drivers/dma/loop_transfer and custom modifications
to that test using three parallel reloading channels. Also tested
with a trivial program that did memory->serial.
Signed-off-by: Michael Hope <mlhx@google.com>
[hageman@inthat.cloud: Rebased and updated commit message]
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
While configure_linker_script() may be useful for other linkers, it
currently only aimed at GNU ld. To really be useful among different
linkers, we would need to abstract its usage of the C preprocessor.
We can do this later, if needed.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Rather than associating defines within the function, let the call sites
themselves pick the appropriate define. Add new argument for this.
This also permits us to remove regex matching.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Reduce the amount of {pre,post}fixing magic: I.e. let it be clearer at
call sites that "linker.cmd" is a file, rather than having to know that
"linker" will be postfixed with ".cmd" internally.
Change argument name to linker_script_gen, to better indicate that we
are producing a generated file.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Now that we avoid the two-step procedure, we can simplify the name of
the construct_add_custom_command_for_linker_pass macro.
Move description comment up to head of definition, making the purpose
clearer.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Change construct_add_custom_command_for_linker_pass from function into
macro. The purpose of the function was to set the output variable to a
string that would be fed to add_custom_command. This meant all use
required a two-step procedure and an intermediate
variable (custom_command).
The environmental leakage from a macro in this case is small, so let's
just simplify to a macro and avoid the two-step.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Full grep reveal ALIGN_SIZING_DEP is only mentioned in cmake, where
it is never assigned a value.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
There are limits to CMSIS stack sizes, we can't just
add a number to it. Use the configured maximum.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set to same default as regular stacks. This doesn't use
any extra memory until CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT
is set. 0 is not a valid default if that is set.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the name of mem-domain API function to add a partition
so that it complies with the 'z_' prefix convention. Correct
the function documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix missing BT_CTLR_FILTER conditional compilations that
cause compile errors when device whitelisting feature is
disabled in builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move GNU ld linker specific flags related to orphan handling into
toolchain_ld_baremetal().
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move --gc-sections flag to toolchain_ld_base()
Move --build-id=none flag to toolchain_ld_base()
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Depending on configuration, this value could end up as
a variable and not an array symbol, causing a crash if
newlib decides to call _sbrk on behalf of a user thread,
which needs to perform arithmetic on it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Depending on optimization level, the TC_RESULT_STR[]
array could actually be placed in memory instead of
being expanded at compile time, resulting in memory
access errors from user mode.
Just replace TC_RESULT_TO_STR() with an inline function
containing a switch statement instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The various struct pipe_sequence were not located in memory
accessible to user mode. With optimization turned on, they
weren't in memory at all, but with code coverage enabled
the arrays were actually being read, resulting in memory
access failures from user mode.
Fix them by placing in ROM, they never get modified.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The pkt variable cannot be NULL at this point so the check for
nullness is not needed.
Coverity-CID: 198002
Fixes#15777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* Rename the stack local 'done' to 'evdone' so as to disambiguate from
MFIFO_DEQUEUE_PEEK(done) which is actually 'mfifo_done'.
* add comment on ull_slave_done
* add comments to addr_us_get
* add comments to HCI_CLASS
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Introduce new API function for ieee802154 driver configuration.
Currently this function is used for ACK configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
STACK_POINTER_RANDOM depends on a random generator, this can be either a
non-random generator (used for testing purpose) or a real random
generator. Make this dependency explicitly in Kconfig to avoid linking
problems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The PR removes the exclusive limit on enabling both UART_ASYNC_API
and UART_INTERRUPT_DRIVEN so that both options can be enabled
together for same uart driver.
Also, the interrupt handler will be used for both cases. So, enable
definition of interrupt handler for both.
However, nRF UART driver still wants to enable only one of them.
So, a new config is added to disable the code for UART_ASYNC_API
when the option UART_INTERRUPT_DRIVEN is enabled.
Signed-off-by: Jun Li <jun.r.li@intel.com>
Modern versions of GDB support multiple architectures
with the same binary.
In fact, Ubuntu stopped shipping a gdb-arm-none-eabi
package, gdb-multiarch should be used instead.
This fixes a failure on those systems where otherwise CMAKE_GDB will be
assigned to CMAKE_GDB-NOTFOUND.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
k_poll_signal_raise() returns an error code to indicate that the raise
was too late to notify an expiring poll. Make clear that this does not
mean that the signal was lost: a subsequent poll will find it and expire
immediately.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
device_get_binding() compares pointers first before doing strcmp().
However, enabling coverage forces -O0 to disable any compiler
optimizations. There would be multiple copies of the same string,
and the code pathing doing pointer comparsion would not be tested
at all. So add this flag to merge string constants such that
the pointer comparison would be exercised.
This also adds a bad driver which fails initialization. This is
to make sure that execution path is covered.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Extended the maximum possible number of sections that track statistics
for each flash page.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the UTIL_DEC_N definitions to handle the UTIL_REPEAT macro with
up to 256 repetitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Changed type of the paramater that determines the number of elements in
the stats group. Now it is possible to declared more than 256 elements.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The mimxrt1015_evk board image was corrupted and did not display
properly in the board documentation. Fix it.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the nRF52840 Coded PHY radio timings based on testing
with conformance tester.
Fixes the following conformance tests:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI Change]
LL/CON/MAS/BV-54-C [Slave Receiving Data, LE Coded, CI Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression in Coded PHY CI change implementation
introduced by reverting the commit 9d1ca9c390 ("Bluetooth:
controller: remove redundant PPI channel and TIMER CC").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds support for the async API for SAM0 SERCOM SPI using
DMA to drive the device. This implementation does the reload
for both transmit and receive in the receive DMA handler.
Doing this simplifies the implementation but means that the
transmit drains completely, resulting in the SPI clock pausing
between buffers while both are reloaded in the receive handler.
Tested with tests/drivers/spi/spi_loopback and several simple
programs monitored with a logic analyzer.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This was tested with the hello world application. UART 0 was used
as console for displaying "Hello World! mec15xxevb_assy6853" to
the serial terminal.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
soc : arm : microchip_mec Use rename fault clear function
The Cortex-M core function to clear faults was rename by
upstream. Update to use new name.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupt are configured in direct
mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupts are configured in
direct mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding possibility to modify shell prompt in Kconfig and in prj.config
file.
Fixes#14547.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When importing a pre compiled imported library it is currently
required to perform three steps.
This commit introduces a helper function which allows the
user to import a library with a single function call.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The intent of toolchain_ld_baremetal() is to collect the flags belonging
to non-hosted (i.e. POSIX-based) targets.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* LINKERFLAGPREFIX's value is GNU ld specific, and
* LINKERFLAGPREFIX is not a convention always honored by all linkers.
Thus we shall not set it from the common root CMakeList.txt.
So we move to linker/ld/target.cmake.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
When performing thread context-switch it is not necessary to
have IRQs locked while saving the current thread's callee-saved
(and possibly floating point) registers. We only need to lock
the interrupts when accessing the thread ready queue cache.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
SVCall_IRQn is used as enum value for SV Call Interrupt for Cortex-M
based SoCs for which CPU_CORTEX_M_HAS_BASEPRI=y. However stm32cube
for stm32l1xx uses SVC_IRQn enum value for this purpose.
This leads to this error:
arch/arm/include/cortex_m/exc.h:101:19: error: 'SVCall_IRQn'
undeclared (first use in this function); did you mean 'SVC_IRQn'?
NVIC_SetPriority(SVCall_IRQn, _EXC_SVC_PRIO);
^~~~~~~~~~~
SVC_IRQn
NB: ext/hal/st/stm32cube/stm32l1xx/soc/stm32l151xb.h file was already
fixed in 9f8260457b ('ext: hal: st: stm32cube: Add HAL for
the STM32L1x series').
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Added Kconfig BT_MAYFLY_YIELD_AFTER_CALL to support vendor requirement
of invoking all outstanding mayflies for a given callee in
mayfly_run().
Signed-off-by: Morten Priess <mtpr@oticon.com>
In ull.c ll_rx_get, a configuration without CONFIG_BT_CONN would
sometimes return an uninitialized node_rx.
In ull_scan.c, the scanning channel was not initialized to 0 (37). This
would cause new scanning to start at random index (0,1,2).
Signed-off-by: Morten Priess <mtpr@oticon.com>
clang doesn't understand fortify at all, provide no op macro,
in order to handle the request to fortify in a generic way.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In case TOOLCHAIN_HOME isn't explicitly reuqested,
(or indirectly forced with CLANG_ROOT_DIR), detect
any host installed clang in the path.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The logic is practically intact and is the following:
1. Use any host installed llvm/clang in the path in case
ZEPHYR_TOOLCHAIN_VARIANT=llvm is requested alone.
2. This can be further restricted with TOOLCHAIN_HOME.
3. And can be further overridden with CLANG_ROOT_DIR,
like previously.
So, only the unconditional restriction to /usr is lifted.
Together with fixing the unconditional set of TOOLCHAIN_HOME
by host tools for non-toolchain needs, this makes the logic
more flexible.
Now, after the logic is controllable by TOOLCHAIN_HOME, 3)
might be an extra, but is left intact for backward compatibility.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Host-tools don't unconditionally set TOOLCHAIN_HOME anymore,
but in case Zephyr's SDK toolchain is used, set TOOLCHAIN_HOME.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Use it's own variable HOST_TOOLS_HOME for host tools and don't
unconditionally set TOOLCHAIN_HOME, preventing the detection of
llvm/clang host toolchain.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Allow host installed clang to be used for native_posix when
ZEPHYR_TOOLCHAIN_VARIANT=llvm.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
When linking, clang doesn't pick -T for some reason and complains,
while -Wl,-T works for both, gcc and clang.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add defines to support updated slot reservation calculation in advertise
Note: Numbers used in added defines are subject to HW specific tuning
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Added a new define (EVENT_IFS_US) to pdu.h - this is now used instead of
previous TIFS_US from vendor specific header
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Correct slot reservation time calc for legacy advertise
Add dependency on data lengths for advertise and scan response
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The function zephyr_append_cmake_library works with
libraries that does not have source files.
This change removes an incorrect statement related
to that.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Fix regression by the addition of CONFIG_BT_CONN conditional
compilation that disabled the advanced clock (crystal)
oscillator management when only observer and/or advertiser
states supported in the controller build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added check to see if CONFIG_BT_CTLR_TX_BUFFER_SIZE is defined,
and use that as the BT_L2CAP_MTU if that is the case. Otherwise,
use the previously hard coded MTU size (64). This enables users
to configure the MTU, enabling longer transfers.
The fix was inspired by how this is solved in
samples/bluetooth/hci_uart/src/main.c
Tested on nrf52840_pca10056.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
This board and the native_posix board share the POSIX architecture.
Some of the native_posix drivers/backends only rely on the
underlaying operating system API, and do not require any special
HW model to operate.
Therefore it is quite easy to reuse some of them into this board.
Currently the only limitation for some, is the interface they use
in the board to register their command line arguments.
This header provides a minimal shim to rename the, otherwise
equivalent, call.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The function error expects only one parameter. The excpetion handler in
scan_path was calling this function with multiple parameters instead of
formatting the string.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A new function pcie_irq_enable() is added to be used in lieu of
irq_enable() when the target device is PCI(e)-attached. The function
attempts to use MSI, when configured in the kernel and supported by
the endpoint; failing that, it will verify that IRQ requested is in
fact routed to the device by the boot firmware before enabling it.
The NS16550 UART driver is updated to use pcie_irq_enable().
The PCI(e) shell is extended to dump information about wired IRQs.
The up_squared devicetree is fixed (reverted?) to IRQ5 for UART1.
The galileo enables MSI by default.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The size of the ROM region is now rounded up to the
nearest power of two; we no longer assume that RAM
is in a different part of memory.
Fixes: #15558
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Modified commands which depends on compile time flags to
use conditional macros.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a Kconfig option to enable DMA for SPI with SOC_NRF52832 as long as
it being disabled due to Product Anomaly Notice (PAN) 58 is explicitly
overridden. This allows the SPIM driver to be enabled for the nRF52832
SoC for situations where PAN 58 is not a problem.
Signed-off-by: Andrew Fernandes <andrew@fernandes.org>
The init routines are the same for SAMD20, SAMD21 and SAMR21, so
move them into common/ to not have three copies of the same code.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
The Atmel SAMD21 (and therefore also the SAMR21) comes with the same
RTC peripheral as the Atmel SAMD20.
Enable it in dts_fixup.h and enable it in the dts for samr21_xpro.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Add the Atmel SAM R21 Xplained Pro Evaluation Kit to zephyr.
So far, UART, SPI, I2C (depends on #14128), debug LED and user button
have been tested.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Adds Atmel SAMR21 soc which is based on SAMD21, but with a AT86RF233
radio connected internally via SPI.
The AT86RF233 is not yet supprted by Zephyr at this point.
This code is very much copy & paste from atmel_sam0/samd21
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Atmel Software Framework (ASF) provides a set of low-level header
files that give access to different hardware peripherals of Atmel's
ICs.
Origin: Atmel SAMR21 Series Device Support (1.1.72)
License: Apache-2.0
URL: http://packs.download.atmel.com/Atmel.SAMR21_DFP.1.1.72.atpack
Purpose: Introduction of ASF for the SAM0 series.
Maintained-by: External
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
toolchain_ld_base() represents flags that are fundamental to linking or
otherwise does not belong in any further specified linker flag category.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The LINKER variable is introduced to follow the same logic and flow as
the existing COMPILER variable: That is, each TOOLCHAIN is responsible
for choosing COMPILER and LINKER.
Currently, Zephyr's build system is hardcoded for GNU ld.
Reflect this in LINKER by letting all existing toolchains use GNU ld.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
toolchain_cc_nostdinc does not only obtain flags (to be placed in a
variable), it obtains and applies them.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Add verification that interface number and endpoint addresses are
correctly allocated.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use new method for defining USB CDC ACM devices using UTIL_LISTIFY and
device count from menuconfig.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
DEVICE_COUNT for some USB classes means how many instances of the
class can be supported by USB stack.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The upipe specific configuration options are selectable unconditionally.
This commit makes them depend on the upipe driver being enabled.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Disable bulk slot image erase when progressive erase is on.
Erase of image bank is performed by image collection procedure
progressively.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Patch adds option for progressive erase of firmware image.
When using this, flash is erased as necessary when receiving
new firmware, instead of erasing the whole image slot at once.
This is useful on some hardware (like nRF52840) that has
long erase times, to prevent long wait times at the beginning
of the DFU process.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fixes: #15664
This commit improve error messaging in case `west` list fails.
Previously any error messages and stack trace reported by `west` will
was thrown away by zephyr_module.py.
Now the error, as well as any stack traces, printed by `west` will be
re-printed to the user.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There was a stray close group comment @} that was causing a large chunk
of the watchdoc API documentation to be missing.
Fixes: #15678
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Removed the CONFIG_ prefix from definitions, which are declared in the
test source file. They could be easily confused with Kconfig
definitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Since STM32_OSPEEDR_VERY_HIGH_SPEED flag is required for all I2S_CK
pins, lets add this to the STM32F4 pinmux header and remove the
duplicates in board files. While we are at it, let's add the missing
pinmux definitions for I2S_2 also.
Fixes: #9028
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Exclude the two variants of smt32_min_dev (stm32_min_dev_black and
stm32_min_dev_blue) from kernel tests.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Replace image and reword some sections to indicate the presence of two
board variants: stm32_min_dev_(blue|black)
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Add support for blue pill and black pill variants of the STM32
minimum development board by splitting board configuration into
stm32_min_dev_blue and stm32_min_dev_black.
CODEOWNERS: Add myself (@cbsiddharth) as codeowner for stm32_min_dev
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Refactor code making set_endpoint() helper which check validity of
input parameters.
Fix bug with usb_set_configuration() always returning true.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
- The script can but does not always generate five files, in fact the
current build invokes it at least three times requesting different
outputs every time.
- --kobj-types-output produces a code fragment; not a standalone/usable
header file. It outputs enum constants for a single enum type and not
several enum types.
- Some outputs include driver instances and others not: clarify which.
- There's an entire and great section in the documentation that took
me ages to find because it's not referenced anywhere in the --help
or code. Fixed.
- Highlight the massive duplication in the CMakeLists.txt to save
déjà vu confusion and minimize future divergence.
- Other minor tweaks.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This implements three API functions that are required for
tests/subsys/usb/device to build:
- usb_dc_ep_disable()
- usb_dc_ep_halt()
- usb_dc_ep_flush()
While halt and disable are trivial, flush is just a stub for now.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Make sure the parameters for the API functions are valid, return error
otherwise.
This is expected by the tests/subsys/usb/device test case.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Change file naming pattern from BoardNameX_ll_clock.c to
clock_BoardNameX.c
File containing LL functions will have the "_ll_" naming
scheme (such as clock_stm32_ll_common.c and .h)
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
This is mainly testing purpose from native_posize ethernet
driver. Enable CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP to have
VLAN tag strip feature on ethernet Rx frames.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If ethernet controller has VLAN tag strip flag enabled
(ETHERNET_HW_VLAN_TAG_STRIP), L2 etherent will not read tag from
the Rx etherent header. Instead it will fetch VLAN tag from
net packet metadata.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Some ethenet controllers want to strip the VLAN tag from
ethernet Rx frames and feed the packet into proper interface
queue based on the tag. Add this flag to get_capabilities()
to provide VLAN tag stripping feature to the controller.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ipv6_fragment tests registered log module but still use DBG
macro of printk. Replaced them with NET_DBG.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We shall not enable by default a system timer in ARM
platforms, namely the SysTick, the Nordic, or the SAM0
RTC timer, simply by assessing the hardware capabilities
(e.g. by conditioning on CPU_CORTEX_M_HAS_SYSTICK).
Instead, now, all ARM platforms needs to explicitly set
their system timer module. Note that this has already
been the case for ca 80% of the ARM platforms.
This clean-up allows us to decouple HW capabilities from
system configuration (for example, Nordic platforms may
enable option CPU_CORTEX_M_HAS_SYSTICK, and still use
the platform-specific RTC timer for system timing).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the symbol CPU_HAS_SYSTICK to
CPU_CORTEX_M_HAS_SYSTICK, to look similar to all
other CPU_CORTEX_M_HAS_ options, and moves the
K-config symbol definition from arm/core/Kconfig to
arm/core/cortex_m/Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM SysTick timer is implemented by default in ARMv7-M
and Mainline ARMv8-M processors, so we include the
corresponding Kconfig symbol in arch/arm/core/cortex-M/Kconfig
and remove the selections from the Cortex-M SOCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CPU_CORTEX_M does not need to be selected by Kconfig
symbols that already select a CORTEX_M variant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Allow for including arbitrary data in net_icmpv4_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Allow accessing already parsed information from the ICMP header
that callbacks might be interested in.
This makes the callback signature and behaviour match that of
the ICMPv6 implementation.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
For example it should be possible to compile and use the SLIP module
with NET_L2_DUMMY. This required the following changes:
* Fix a typo in the initializer for struct dummy_api
* Only define eth_capabilities if CONFIG_NET_L2_ETHERNET is defined to
silence a -Wunused-function compiler warning
* Unconditionally include net/dummy.h
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Without this change compilation of the SLIP module would fail if LLDP
wasn't enabled. There is also no need to include net/lldp.h explicitly
as net/ethernet.h will include it conditionally if CONFIG_NET_LLDP is
defined.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
In order to make board listing reusable by external tools, split it out
from the usage helper script into a new boards.cmake that can also be
called directly with cmake -P.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The previous mcuboot reference didn't make sense - it linked to
itself. Linking to the official website should be more useful.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Enabling the RTC event is intended to support peripheral-to-peripheral
interconnects, so introduces a request for HFCLK and PCLK16M when the
event is triggered. This specific event is never used with PPI so
enabling events apparently does nothing but increase power consumption.
Closes#15513
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
main function is not necessary.
And without main here, it is possible to import these
samples zperf files in another project.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
We have users that have problems in their linker scripts where the
order of input sections matters.
To allow users to use the latest Zephyr while working on a fix to
their linker scripts we add an option to allow leaving the sections
unsorted.
See discussion here for more details
https://github.com/zephyrproject-rtos/zephyr/pull/14183
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Reduced flash size for QEMU x86 so it does not consume a lot of RAM
memory where it is simulated.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Statistic for flash has limitation regards number of pages possible to
be counted. This path introduces check for that in source file as it is
not possible to preserve the limit in Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit adds a flash driver implementation that writes to RAM and
exports statistics through stats.h. It can be used to simulate flash
memory for testing purposes.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Aligned format specifiers for the Bluetooth Host. Now, the format
specifier matches the variable type.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This patch adds support for Read Using Characteristic UUID which is one
of the procedure to read the characteristic value especially when the
client only knows the characteristic UUID and does not know the handle
of the characteristic.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
By selecting CONFIG_THREAD_NAME. It makes sense to have this enabled
by default for tests, to easy debugging in a case of crash.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's relatively hard to figure out what thread a crash happens in
from the crash dump. E.g, it's usually not immediately possible to
find it out from linker map due to the fact that static symbols are
not there (https://sourceware.org/bugzilla/show_bug.cgi?id=16566).
So, try to do it as easy if possible, by just printing thread name
in a dump, if thread names are enabled at all.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to re-initialize the trickle->timer delayed work to use
trickle_timeout() if there are multiple triggerings.
Fixes#15606
Signed-off-by: ling wei <lingwei@cisco.com>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Output what steps the app performs, so it doesn't look to user
that it simply hanged.
2. Don't use infinite timeouts, because that will hang.
3. Clearly note which requests are for IPv4 vs IPv6 server.
4. Define IPv4 gateway. This sample is configured to run against
SNTP on local Linux host, but standard distros (e.g. Ubuntu) don't
run SNTP server by default, so usual outcome for running this sample
will be timeout. A realistic way to get successful output would be
to run it against a server on the Internet, for what a gateway is
required.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When there is no need to divide the PWM clock (i.e. the requested
period cycles fit the 15-bit PWM counter), the prescaler value
should be 0, not 1.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When making a build folder pristine until now we were running the
'pristine' build target. The issue with that is that ninja/make or
whatever build tool is being used might decide to re-run CMake itself if
some of the dependencies have changes. This might trigger an error that
is unfriendly and unnecessary, since the user is explicitly asking for
the build folder to be wiped before starting a fresh build.
To avoid this issue restor to running directly the CMake script that the
'pristine' build target itself uses, so as to make sure that the build
folder is wiped unconditionally regardless of changes made to the tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The test is to run for boards that have memory protection
enabled; having MPU capabilities on the SoC level is not
sufficient (the user, or the board itself, might not enable
memory protection support). This commit applies that policy
to the mem_protect/protection test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added implementation to pause data PDU transmission during
PHY update procedure in order to comply to BT Spec. v5.1
Vol.6, Part B, Section 5.1.10.1 Packet transmit time
restrictions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactoring to move PKT_US into ULL internal header,
and rename ull_conn_allowed_check to ull_conn_llcp_req.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ported implementation of Data Length Update Procedure to
ULL/LLL architecture of the Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The GPIO driver for the Intel Apollo Lake has so many pins it has to
export ten devices to shoehorn its one device into the GPIO API. The
current implementation uses the shared IRQ driver because these
pseudodevices all share one IRQ. However, since the GPIO driver is
aware of all the possible interrupt sources, it's smaller and faster
(and not even messy) to handle it internally, so this patch eliminates
the dependency on the shared IRQ driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit prevents a situation when stored and possibly modified
commissioner dataset is overwritten with default configuration during
OpenThread initialization.
It introduces a new function, openthread_start, which verifies if the
dataset is already stored, and if not, depending on configuration,
preloads the default configuration or initiates the join procedure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function net_pkt_get_info() is found in net_pkt.h and not
in buf.h. This caused
"implicit declaration of function ‘net_pkt_get_info’"
warning if CONFIG_NET_BUF_POOL_USAGE was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
Add board support for 96Boards WisTrio LoRa Tracker board from
RAK Wireless. This board is one of the 96Boards IoT Edition platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Using the new option --timestamps, any output from sanitycheck will have
a timestamp to help identify bottle necks and monitor execution time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When detecting changes to boards, make sure we test all board
configurations available in that board directory, not only the main one.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We already select HAS_DTS at the arch level for X86 so we don't need to
duplicate it at the board level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
None of the UART drivers actually reference the PCI data members
declared in this header, so they are removed.
Signed-off-by: Charles Youse <charles.youse@intel.com>
Excerpt from the manual:
If ptr is NULL, then the call is equivalent to malloc(size) [...]
Without this commit, such calls end with a BUS FAULT.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Make sure that when e.g. CONFIG_SERIAL is set, CONFIG_UART_SAM0 is
selected automatically when the sam0 SoC family is used.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Add USART1 and LPUART1 nodes on stm32wb series.
Only these 2 ones are available for now on this series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add GPIO support to stm32wb series.
Only ABCDE and H ports are available for now on this series.
Accordingly, update series dtsi file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support to stm32wb series in stm32 clock_control driver.
Ip is similar to stm32l4 one but AHB bus presacler is renamed
to "CPU1" and CPU2 and AHB4 prescalers should be defined.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following introduction of STM32Cube for STM32WB, update stm32cube
folder to enable build of STM32WB Cube package.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In this commit, a config.h header file is added to support the case
when the NET_CONFIG_SETTINGS is not used. main.c is also modified to
enable platforms that do not support IPv6. These changes are necessary
in order to allow cc3220sf_launchxl support.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Added bBreak, bRingSignal, bFraming, bParity and bOverRun
handling in cdc_acm_line_ctrl_set.
Reference: Chapter 6.5.4 of Universal Serial Bus Communications Class
Subclass Specification for PSTN Devices rev 1.2
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The CONFIG_ prefix is reserved in Zephyr, rename CONFIG_SHIFT and
associated constants by adding a RCC_ prefix
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Add configuration, pinmux, dts and documentation for the STM32MP157
Discovery board based on the STM32MP157 SoC.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
The stm32mp1 exti ll driver is mandatory for compilation.
add it on top of stm32cubeMP1 version 1.0.0.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Provide required changes to stm32cube HAL and LL for the
STM32MP1X series MCU.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: https://github.com/STMicroelectronics/STM32CubeMP1
Commit: 1.1.0
Purpose: HAL layer for STM32MP1
Maintained-by: External
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Add the initial SoC support for the STM32MP1 family. The code was
tested on STM32MP157c, but should work on any STM32MP1XX currently
available.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
The comment for:
set_target_properties(${logical_target_for_zephyr_elf} PROPERTIES
OUTPUT_NAME ${KERNEL_NAME})
was completely off-topic and making something relatively simple
incredibly puzzling and time-consuming to understand.
Re-order the if(GKSF OR GKOF) clauses so the two initializations of
logical_target_for_zephyr_elf are close to each other and so the very
short clause is not buried at the bottom of the long one.
Other minor logical_target_for_zephyr_elf comment fixes.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Sample code for AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Implementation of AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Sample code for AMS (Austria Micro Systems) Indoor Air Quality Sensor
reading VOC and equivalent CO2 values.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Mark the three distinct choices for how to program the board as
separate options, and add some clarifications on each. For the MCUboot
route, use smp_svr instead of blinky, to give the user a hint about
how to keep their devices up to date from application land.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This patch adds support to the nRF9160 for using a dedicated
GPIO pin to reset controllers running on nrf52840_pca10090.
It resets the controller before opening the H4 device, and it
delays the controller from booting until all bytes traveling
to the host have been received and drained from the UART,
thus ensuring that communication can begin from a clean state.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Enable the GPIO reset pin feature of nrf52840_pca10090
on pin P1.02 and the wait NOP feature of the controller.
These are used to let nrf9160_pca10090 synchronize the
HCI communication with nrf52840_pca10090 controllers.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Let one of the MCU interface pins be configured to act
as a reset line. This mitigates the lack of a connection
between the nRF9160 and nRF52840 PINRESET.
Minor refactoring and updated comments.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The patch provides flash offsets appropriate for running
this sample on nrf9160_pac10090 targets.
As that sample is small one, it is done with assumption that image_1
flash partition is empty.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Write protection was not disabled prior erase call.
It used to work before only because nrf driver had not check
the protection before erase execution. This behavior was changed in
order to align to zephyr - which implied requirement for this test fix.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
nRF9160 can't provide FICR data while operation in non-secure
domain.
This patch start using flash layout properties provides by
nrfx API for get flash properties, which resolves problem
described above.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce nrfx_nvmc driver into nordic flash driver implementation.
Thanks to that nrf9160 SoC becomes supported by the driver.
nrfx helps dealing with differences with interface to the NVMC
in secure and non-secure execution modes.
This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and
select it along with nordic flash driver.
Disabled UICR operation on nRF9160 for non-secure build
as UICR is not available in this mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add driver support for Atmel SAM0 device ID, which is 16-bytes long.
The device ID can simply be read from memory at a known location, but
the location is only described in the data sheet, not in ASF.
For SAMD2x it's 0x0080A00C, 0x0080A040, 0x0080A044 & 0x0080A048.
For SAMD5x it's 0x008061FC, 0x00806010, 0x00806014 & 0x00806018.
This adds a new property to the device tree to define the device ID
registers for this SoC family.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
The code (net_buf_simple_init in particular) expects the data buffer
to immediately follow the net_buf_simple struct, so it's wrong to
request any specific alignment for this buffer. In practice this
doesn't make any difference since the net_buf_simple struct itself is
4-bytes aligned and a multiple of 4 bytes, however the extra
__net_buf_align makes it look like its location in memory doesn't need
to immediately follow the net_buf_simple struct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The dependencies in the scripts are figures, images, includes or literal
includes. Typically those dependencies are placed relative to the .rst
file that is being copied, but in some instances you might want them to
refer to an absolute path which, in fact, is relative to Sphinx's
top-level source directory. In this case, and as long as the top-level
source directory is provided, do not emit a warning.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In windows an additional / is added when using zephyr-env.cmd
this causes a build error in some scenarios. It also creates
ugly file paths.
Signed-off-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update read and write callback documentation regarding local access of
the attribute contents.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces set command to GATT which can be used to write local
attributes:
uart:~$ gatt set 0x000b 62 6c 61 68
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 62 6C 61 68
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces get command to GATT which can be used to read the
local attributes:
uart:~$ gatt get 0x000b
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 74 65 73 74 20 73 68 65 6C 6C
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables locating specific attribute in the database:
uart:~$ gatt show-db 0x2a00
attr 0x004235a8 handle 0x000b uuid 2a00 perm 0x09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces shell_hexdump API which can be used to print an array
such as a network buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force soc.h to include the headers generated automatically
by DTS. In addition, force arm_mpu_regions.c to include
misc/slist.h for ARRAY_SIZE() macro. arm_mpu_regions.c
does not need to include soc.h (it is included indirectly
via arm_mpu.h)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We don't actually need spinlocks here.
For user_copy(), we are checking that the pointer/size passed in
from user mode represents an area that the thread can read or
write to. Then we do a memcpy into the kernel-side buffer,
which is used from then on. It's OK if another thread scribbles
on the buffer contents during the copy, as we have not yet
begun any examination of its contents yet.
For the z_user_string*_copy() functions, it's also possible
that another thread could scribble on the string contents,
but we do no analysis of the string other than to establish
a length. We just need to ensure that when these functions
exit, the copied string is NULL terminated.
For SMP, the spinlocks are removed as they will not prevent a
thread running on another CPU from changing the buffer/string
contents, we just need to safely deal with that possibility.
For UP, the locks do prevent another thread from stepping
in, but it's better to just safely deal with it rather than
affect the interrupt latency of the system.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add board support files for mimxrt1015_evk, the development board for
i.mxrt1015 (CM7) SoC.
- Add pinmux, dts, and doc.
- Tested samples: hello_world, philosophers, synchronization,
basic/blinky, basic/button.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Add mcux 2.5.0 drivers and device header files for mimxrt1015. Update
several drivers that were already imported for other SoCs but also apply
to mimxrt1015.
Origins: NXP MCUxpresso SDK 2.5.0
URL: mcuxpresso.nxp.com
Maintained-by: External
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Add driver and device tree binding for the Low Power Inter-Integrated
Circuit (LPI2C) controllers found in the RV32M1 RI5CY SoC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Use the RV32M1 SoC intmux driver initialization priority set by
Kconfig. Change the default to match the default value of 40 used
before.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
I often wish I had a short and Zephyr-specific place to point people
to when they're asking for help in ways that make it hard to help
them.
Add one.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This is a bit wordy. Let's let the bold text and links stand on their
own; anybody looking at a README on GitHub or in technical
documentation probably knows what these things mean.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The struct _caller_saved is not used. Most architectures put
automatically the registers onto stack, in others architectures the
exception code does it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The struct _kernel_ach exists only because ARC' s port needed it, in
all other ports this was defined as an empty struct. Turns out that
this struct is not required even for ARC anymore, this is a legacy
code from nanokernel time.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
added three missing LEDS for stm32f4_disco, in order to run the
samples/basic/disco application on the stm32f4_disco
Signed-off-by: Jan Sturm <jansturm92@googlemail.com>
Add a simple Coccinelle script that counts identifier lengths and
prints out a warning if it is longer than 31 characters.
The script can be run with:
spatch -D report --very-quiet \
--include-headers --recursive-includes \
--cocci-file $ZEPHYR_BASE/scripts/coccinelle/identifier_length.cocci \
--dir $ZEPHYR_BASE \
kernel/
Where '--include-headers' and '--recursive-includes' can be omitted
if neede.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Be a bit more friendly to users, by providing some hints
about possible reasons why a command line option was not
understood.
Also describe in the help message that which options are
avaliable depends on what has been selected in this build.
Fixes: #15046
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Use the improved HMAC_PRNG test from TinyCrypt version 0.2.8,
(commit 6e0eb53fc8403988f97345e94081b0453f47231d),
that was imported into Zephyr in
commit 06d0b6a694.
Rewrote part of the test code to use the ztest asserts and
test_utils.h functionality.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Enables the pyocd runner on mimxrt1060_evk and mimxrt1064_evk boards
using the generic cortex_m target. Note that this target is not capable
of programming flash, therefore can only load an application to internal
SRAM (set CONFIG_CODE_ITCM=y and CONFIG_DATA_DTCM=y) or attach to an
application already programmed to flash by other means (e.g., DAPLink
drag-and-drop).
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In non-secure Trustzone application dedicated flash non-secure
partition are used instead of regular one, which become secure
partition in Trustzone collaboration model.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The Harness handlers for tests were parsing the realtime stream out of
qemu pipes by recompiling and executing every regex for every line (!)
of output from the simulator. That's a significant CPU load, and it's
(1) in a separate thread not tracked by the JOBS limit and (2)
happening at the worst possible time and contending with the qemu
process for host CPU cycles that it needs to hit its (real world)
timer targets on time.
Compile them just once, please.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Same deal as in commit 4638652214 ("Kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), fixing new stuff that got
introduced since then.
Some symbols, like ALTERA_AVALON_PIO, are only defined in
Kconfig.defconfig files, and so need the def_bool.
Motivation (from the note at the end of
guides/kconfig/index.html#common-shorthands):
For a symbol defined in multiple locations (e.g., in a Kconfig.defconfig
file in Zephyr), it is best to only give the symbol type for the "base"
definition of the symbol, and to use 'default' (instead of 'def_<type>'
value) for the remaining definitions. That way, if the base definition
of the symbol is removed, the symbol ends up without a type, which
generates a warning that points to the other definitions. That makes the
extra definitions easier to discover and remove.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I does make sense to use index only after we make sure it is valid,
issue is found in harness tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of checking for -EINVAL check that return is not successful
since USB device may return other error code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable harness so we can execute smoke tests on the hardware with
command line:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <BOARD>
-T samples/subsys/usb/hid
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add configuration, dts and documentation for the MINI-M4 for
STM32 board based on the STM32F415RG SoC.
See https://www.mikroe.com/mini-stm32f4 for more details.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
In stereo case the pdm stream continuosly alternates 1-bit from
the left channel with 1-bit from the right channel. In this case
we need first to demultiplex channels bits on byte basis.
Then the Open_PDM_Filter library has to be called twice, one for
each channel.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
If SDK_VERSION for whatever reason is unset cmake will end up in an
inifite recursion loop, which for me crashed using cmake version
3.13.4 and exits with an error using 3.14.1.
This may happen if ZEPHYR_TOOLCHAIN_VARIANT is set to "zephyr", but
ZEPHYR_SDK_INSTALL_DIR is invalid (or unset).
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
This commit adds CAN support for nucleo F746zg.
Furtermore CAN was added in stm32f7.dtsi and pinmuc_stm32f7.h
CAN_RX: PD0, CAN_TX: PD1
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Add support for pulsing the hardware reset pin of the FXOS8700 high
during initialization.
According to the datasheet, this is required for the I2C/SPI bus
auto-detection logic to work properly if the VDD/VDDIO power
sequencing order cannot be guaranteed.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2 identical packages were defined for stm32f412 SoC, invariant "g".
Merge them in new sinclge stm32f412Xg.dtsi.
Update matching boards accordinlgy.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Splitting a string like 'foo="bar=baz"' on '=' will give ['foo', '"bar',
'baz"'] instead of the intended ['foo', '"bar=baz"']. split() with
maxsplit=1 to avoid potential issues.
Not seen in practice. Just some future safety.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The 'Shell Options' menu contains just the 'menuconfig SHELL' menu in
the menuconfig interface.
Remove the 'Shell Options' menu and put 'menuconfig SHELL' directly in
the top-level menu instead. Also change the prompt from "Enable shell"
to just "Shell", to make it consistent with "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, symbols not defined with 'menuconfig' with children weren't
listed in the children's menu paths. It was deliberate, but it's
probably an anti-feature in retrospect, because it can make it harder to
find stuff by following the menu path.
Don't try to be clever and just list all the parent nodes in the menu
path.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update Kconfiglib and menuconfig to upstream revision 90c5573c19, to get
these commits in:
Warn for unquoted argument to 'source', etc.
Print a warning suggesting to add quotes for things like
source foo/bar/Kconfig
menu title
prompt unquoted
Example warning:
Kconfig:32: warning: style: quotes recommended around
'lib/Kconfig.debug' in 'source lib/Kconfig.debug'
That quoteless syntax is supported for compatibility with old
versions of the C tools. It only works for a single word.
==================================================================
menuconfig: Include all parents in menu paths
Previously, symbols not defined with 'menuconfig' with children
weren't listed in the children's menu paths. It was deliberate, but
it's probably an anti-feature in retrospect, because it can make it
harder to find stuff by following the menu path.
Don't try to be clever and just list all the parent nodes in the
menu path.
==================================================================
menuconfig: Fix display issue for optional-prompt menuconfigs
_shown_nodes() needs to check whether invisible 'menuconfig' symbols
with optional prompts have visible children, so that they can be
shown outside show-all mode. Previously, only 'config' symbols were
checked.
==================================================================
menuconfig: Remember last saved/loaded path and improve
_conf_changed
Remember the last path that was manually saved/loaded instead of
reverting back to standard_config_filename() (e.g. .config).
Remember the path to the last saved minimal configuration separately
as well.
Also improve the _conf_changed behavior when loading a .config
within the interface. Instead of always treating it as needing to be
saved, check if it's outdated, like for the .config file loaded on
startup.
Also make the exit message ("No changes to save", etc.) always
include the target .config file, which is helpful. Previously, only
the save message did.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Missing quotes are accepted in some places for compatibility with the C
tools, e.g.
source no/quotes/Kconfig
menu Title
It looks broken though. Fix the two places in Zephyr that skip the
quotes. A style warning will be added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gpio_intel_apl_read() should set *value to 1, not 2, when the
GPIO input is a logical high.
Fixes: #15499
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Building with clang reports the following warnings:
stm32l4xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32l0xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f7xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f4xx_hal_tim.c:3615:24: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f3xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f2xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f1xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Building with clang reports the following warnings:
stm32f0xx_hal_tim.c: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
else if((htim->State == HAL_TIM_STATE_READY))
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
Removing the extra () fixes the warning
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Just like board's can be placed in out-of-tree BOARD_ROOT's, we now
support DeviceTree sources and bindings being placed in out-of-tree
DTS_ROOT's.
This required for out-of-tree drivers that use DeviceTree.
To implement this we get rid of various user-settable CMake variables
like DTS_APP_BINDINGS, DTS_APP_INCLUDE, and instead have ZEPHYR_BASE,
APPLICATION_SOURCE_DIR and out-of-tree directories conform to using
the same DTS_ROOT concept and directory structure.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
All DT include directories are system directories, except for
dts/common. There is no reason for dts/common to diverge, so we align
it with the other directories to be consistent.
Also, we move it closer to the other include directories.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
For STM32L47x/48x series devices, register ASCR should be configured to
connect analog switch of gpio lines to the ADC.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Reformat L4 pinmux to be consistent with other pinmux files,
and for a better reading.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Fixed using chipselect with seperate chipselect GPIOs and how they were
referenced from/in DeviceTree.
Also configure the device during initialization so it's ready to go
after init.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Project configuration to run the CAN sample with the MCP2515 attached
via SPI as the CAN controller.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Adjusted the MCP2515 driver to switch from KConfig SPI configuration to
DTS based configuration.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The MCP2515 is a CAN controller that can be connected via SPI to an
host MCU. This driver adds support for the MCP2515 as a new driver in
the CAN subsystem.
As it is a SPI peripheral it uses a thread for its interrupt
handling and the received message filtering is done inside this
interrupt thread, as the MCP2515 filter capabilities are not sufficient
for the Zephyr CAN interface.
The driver was validated with an external CAN logger and the adjusted
CAN sample application.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The following fix:
commit c8b17ec403
Author: Tobias Aschenbrenner <tobias.aschenbrenner@blik.io>
Date: Tue Dec 18 14:16:00 2018 +0100
fix: kw41z: Use correct mapping for dBm
Was using SYS_LOG_INFO and should be using LOG_INFO.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A parallel PCI implementation ("pcie") is added with features for PCIe.
In particular, message-signaled interrupts (MSI) are supported, which
are essential to the use of any non-trivial PCIe device.
The NS16550 UART driver is modified to use pcie.
pcie is a complete replacement for the old PCI support ("pci"). It is
smaller, by an order of magnitude, and cleaner. Both pci and pcie can
(and do) coexist in the same builds, but the intent is to rework any
existing drivers that depend on pci and ultimately remove pci entirely.
This patch is large, but things in mirror are smaller than they appear.
Most of the modified files are configuration-related, and are changed
only slightly to accommodate the modified UART driver.
Deficiencies:
64-bit support is minimal. The code works fine with 64-bit capable
devices, but will not cooperate with MMIO regions (or MSI targets) that
have high bits set. This is not needed on any current boards, and is
unlikely to be needed in the future. Only superficial changes would
be required if we change our minds.
The method specifying PCI endpoints in devicetree is somewhat kludgey.
The "right" way would be to hang PCI devices off a topological tree;
while this would be more aesthetically pleasing, I don't think it's
worth the effort, given our non-standard use of devicetree.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Right now only numerical values are printed which must
be looked up in the Designware ARCv2 ISA Programmer's
Reference, which is not public.
Add a non-default Kconfig to print more information at
the expense of footprint, and enable it for all the simulator
targets.
We only print code/parameter details for machine check and
protection violations, more may be added later as desired.
This should cover all the exceptions we commonly encounter
for memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enable the clock for GPIO ports on the RV32M1 SoC before attempting to
access the port controller registers.
Fixes: #15339
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In addition to checking that the ARP entry does not exist as the
implementation is done currently, also check if the ARP packet
is due to IPv4 link local address configuration. In both cases
use the provided IPv4 address instead of the one set for the
interface.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
IPv4 link local uses ARP to detect conflicting addresses. Properly
set the ethernet packet type to NET_ETH_PTYPE_ARP when probing
for address duplicates.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The source address in unicast DHCPv4 Request packets was found out
to be all zeros address 0.0.0.0. This address is only acceptable if
the destination is a multicast one, where the host in question is
acquiring a DHCP address lease. This is true for the DHCP Discover
and the initial DHCP Request message from the client towards the
server. As subsequent DHCP Request renewal messages are sent as
unicast to the server, the server will drop such packets.
Fix this issue by explicitely specifying what source IP address is
to be used, if none is specified, the all zeros address 0.0.0.0 is
used in multicast addresses. The source address in the other
unicast cases is identical to the 'ciaddr' in the DHCP message.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
After the rework in #12403, specifying a shield which has overlay
out of the tree causes unnecessary inclusions of overlays.
For every board root, overlays that have same index as
expected overlay are being included.
Fix this by removing already included overlays from SHIELD list.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
According to documentation Compare event will not be triggered
if CC=0 and CLEAR task is set. Added handling of that situation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
SAMD20 does not have the DMA or USB peripherals and as a result
the IRQs for all subsequent lines are shifted down from SAMD21.
This splits the interrupt assignment for the SERCOMs into the
SoC specific DTS file and moves the USB definition to SAMD21 only.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
The radio API expects the setting of the TX-power in dBm. The actual
TX-power is however set by a 6bit register, which mapping between
register value and power in dBm is a lookup-table in the datasheet.
This mapping for the kw41z was off, which not only lead to incorrect
output power, but also to a maximal output power of only -1.9 dBm
instead of the possible +3.5 dBm.
Signed-off-by: Tobias Aschenbrenner <tobias.aschenbrenner@blik.io>
Signed-off-by: Franco Saworski <f.saworski@posteo.de>
If the user attempts to send data before the USB connection is
established (see the HID sample for an example of such code), the
DataInCallback never gets called which leaves the write semaphore in a
taken state forever.
Signed-off-by: Josef Gajdusek <atx@atx.name>
The SYSCFG_CFGR1_PA11_PA12_RMP define is present even on packages where
the remap isn't strictly required. This commit makes the remap optional
based on a DT property.
Also fixes syntax error caused by a missing );.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Write the net_pkt using net_pkt_write() and then verify that the
data is actually written into net_buf.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a new command-line and build config option, `pristine`, that the
user can pass to `west build` or set in its configuration file(s) in
order to automatically trigger a pristine build on every build or
whenever west considers it required.
The option can take the following values:
- never: Never run the target
- always: Always run the pristine target before building
- auto: Run the pristine target when required
With `auto`, the pristine target will be run when running
west with an existing build folder containing a build system and:
- Selecting a different board from the one currently in the build system
- Selecting a different application from the one currently in the build
system
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The -B option has always existed but was first officially documented in
CMake 3.13.0. In that same release the -S option was introduced,
replacing the old undocumented -H. Switch to using the officially
documented options.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If promiscuous mode support is disabled in Kconfig and promiscuous.h is
included the build will fail. The returned errno should be ENOTSUP.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
This is needed to remove noise when comparing binaries across git
commits and more generally for anyone who wants to manual
control/override the version number when building with or without a
.git/ subdirectory.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
One of the first things needed when comparing builds of tests across
different environments/systems is to make sure the same (sub)tests were
selected and run in the first place. For that purpose sort the output of
--testcase-report and --discard-report as they were in random order.
Actually make the entire class TestInstance sortable by adding a
standard __lt__() method comparing unique instance names; it could be
useful again.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
While this race seems unlikely and harmless let's play it safe and
implement the usual solution: temporary file + atomic rename.
The race is unlikely and maybe even harmless because:
- Only sanitycheck seems to invoke cmake concurrently.
- Users rarely delete their ~/.cache/zephyr/ToolchainCapabilityDatabase/
- All concurrent cmake processes write the same, single byte to the same
files.
- Creating a single byte is at least very fast, so extremely short
window for others to read an empty file.
For additional background see links in issue #9992
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This makes the output of file2hex.py deterministic by default while also
letting the user set the mtime in the gzip header manually if desired.
Use the option without any argument to restore the previous behavior
that sets the current (and obviously changing) "now" timestamp.
To test: ./sanitycheck --tag gen_inc_file
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If the compiler supports it, strip the ${ZEPHYR_BASE} prefix from the
__FILE__ macro used in __ASSERT* macros, in the
.noinit."/home/joe/zephyr/fu/bar.c" section names and in any application
code. This saves some memory, stops leaking user locations in binaries,
makes failure logs more deterministic and most importantly makes builds
more deterministic.
- .noinit section names now look like this in objdump -h:
17 .noinit."./kernel/init.c".2 00001100 00000000 ...
18 .noinit."./kernel/init.c".1 00001200 00000000 ...
19 .noinit."./kernel/init.c".3 00001800 00000000 ...
- The output of __ASSERT* macros now looks like this:
ASSERTION FAIL [0] @ ./samples/hello_world/src/main.c:13
The world comes crashing down
***** Kernel Panic! *****
Current thread ID = 0x00400040
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit enable Bluetooth SMP Service which will help
us to do Device Firmware Upgrade over thr air. By default
it is not enable.
Reference: $zephyr/samples/subsys/mgmt/mcumgr/smp_svr
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
General MIC fix for AAD lengths up to 14 bytes.
This case doesn't concern the mesh stack because it uses 16 bytes.
Signed-off-by: Reham Tarek <reham.tarek@si-vision.com>
This stores the database hash and check if it has changed on commit
skipping service changed if hash matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Custom handlers without any arguments don't since there is a check for
argc > 1, to fix this behavior removing the check.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If handle is over the range end return since handles are always placed
in ascending order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces bt_gatt_foreach_attr complexity (O(n)) so it can skip
ahead when the start handle is not within its service handles.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It may be very important information for the developer if scanning
fails to start or stop, so add proper logs. There's no need to log
EALREADY errors, since the mesh stack doesn't track the current scan
state and simply relies on the under lying GAP layer to return this
error if the desired state is already set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All docs should have a label at the top that would
permit cross-document linking via :ref:`labelname`.
Update "testing" label that would have conflicted and fix the only
reference to the old "testing" label in development process
documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
* Check the CPSR mode bits to see if we are in IRQ or FIQ mode
*
* @return 1 if in ISR, 0 if not.
*/
staticALWAYS_INLINEboolz_IsInIsr(void)
{
unsignedintstatus;
__asm__volatile(
" mrs %0, cpsr"
:"=r"(status)::"memory","cc");
status&=MODE_MASK;
return(status==MODE_FIQ)||(status==MODE_IRQ);
}
/**
* @brief Setup system exceptions
*
* Enable fault exceptions.
*
* @return N/A
*/
staticALWAYS_INLINEvoidz_ExcSetup(void)
{
}
/**
* @brief Clear Fault exceptions
*
* Clear out exceptions for Mem, Bus, Usage and Hard Faults
*
* @return N/A
*/
staticALWAYS_INLINEvoidz_clearfaults(void)
{
}
externvoidcortex_r_svc(void);
#ifdef __cplusplus
}
#endif
#endif /* _ASMLANGUAGE */
#endif /* _ARM_CORTEXRM_ISR__H_ */
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
