Log failure to register authentication handlers since returning errors
from the shell is not visible to the user.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle return value of GATT service register and unregister functions.
Log action to shell.
Fixes: #38013
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the broken logic in the kernel/thread_stack test
The modified test should do direct read & write from estimated stack
pointer to highest address in the stack buffer.
Previously this test was start from lowest address in the stack
which would trigger exception of hardware stack checking scheme
violation on ARC boards and other targets with hardware stack
overflow detection.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Finetune coap_server sample parameters for better user experience.
Reduce the maximum retransmission count to release resources earilier in
case client is unreachable and no longer responds. Increase the maximum
number of pending retransmissions, along with the heap size (the buffers
for messages are allocated on a heap), to improve sample responsiveness,
in case multiple unreplied messages are pending retransmission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case no reply is received for notification message, remove the
corresponsding observer since it's no longer reachable, freeing slot for
another one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retransmission handler only increased the retransmission count, w/o
sending the actual message again. Additionally, the next retransmission
time calculation was broken - it did not take into consideration the
time that has already passed since before retransmission, and re-applied
the entire timeout value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
binary_f16 and binary_f16.fpu test cases fail when target
SRAM size is below 140k.
Update test case requirements to set min_ram to 144.
Additionally, remove the platform_exclude hich is now useless
(frdm_kw41z ram is 128k).
Fixes#38826
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Check the return value of bt_rand when creating identities.
Failure to generate a random IRK would result in the privacy feature
being compromised.
Fixes: #38120
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix unexpected control flow in host keys module. A continue in a do
while false act the same as a break. This entire construct can be
replaced with a simple if else control flow.
Fixes: #38014
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Check len is not zero before accessing data pointer, the len variable
is not checked before this point so cannot be trusted to not be zero.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The socket API was updated with mutex protection, however this
was not reflected in the documentation. Remove the obsolete note on the
thread-safety status of the socket API, to prevent confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Ensure that length variables (len0, len1, len2) are positive
before they are used for array indexing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update sam0 i2c driver to directly send/receive next message if it is
in the same direction and the current message has no stop or restart
flags. Seems like in some drivers this is the expected behaviour.
Fixes#36857
Signed-off-by: Christoffer Zakrisson <rustypig91@gmail.com>
Fixes an issue whereby the application is configured for extended
advertising mode but advertises in legacy mode with a large device name
which should be limited to 31 bytes
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The struct was declared twice (once as an opaque type) in
iso.h, but was unneeded. Removed to avoid confusion about
whether it is an opaque type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixed discrepancy between documentation and actual returned
error code when API is not enabled or not supported by a
device. Added detection of case when device does not implement
uart_callback_set but ASYNC api is enabled. Returning -ENOSYS in
that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some details on the changes made in the device power management area
(callback simplification).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The st7789v_transmit function does not return any error code (void), so
ret = st7789v_transmit(...) is wrong.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Ignore the return value of the bt_gatt_change_aware function when the
client is reading the database hash characteristic value. This is the
point where the client becomes change-aware, so nothing else should be
done if the client is change-unaware.
Fixes: #38012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a regression introduced in b8770acc28 when
aligning with BT Core Spec 5.3 naming convention.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Updates wording in Coding Guidelines page to remove outdated timelines
and correct the criteria for each stage. Changes reflect that we are
in stage 1 and will not reach stage 2 until the CI for enforcing
coding guidelines has been established.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
The root cause of #38591 was region symbols being placed before the
section description for data region.
To support both schemes with the linker generator, a new
`SYMBOL SECTION` argument has been added to the zephyr_linker_group()
function.
This commit updates the arm/linker.cmake CMake linker file to use the
new `SYMBOL SECTION` argument for the data region group and text region
group so that those two groups now behave identical to the behavior when
using the cortex_m linker.ld template.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The root cause of #38591 was region symbols being placed before the
section description for data region.
Some region start symbols are placed before section description, other
region start symbols are placed inside the first section in the region
and thus identical to the sections own first symbol.
To support both schemes with the linker generator, a new
`SYMBOL SECTION` argument has been added to the zephyr_linker_group()
function.
The ld_script.cmake linker script generator has been updated to support
the new argument so that generated ld linker script has identical
behavior to the templated ld linker scripts.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38591, #38207, #37861
The commit 65a2de84a9 aligned the data
linker symbol for sections and regions.
The data region symbol start has been placed outside the sections thus
being defined as the address of the region before alignment of the first
section in the data region, usually the `datas` section.
The symbol defining the start address of the data section is after
section alignment.
In most cases the address of the data region start and datas section
start will be identical, but not always.
The data region symbol is a new linker symbol and existing code has
been depending on the old data section start symbol.
Thus, the update to the use of the data region start symbol instead of
data ram start symbol thus results in a different address when the
section is aligned to a different address.
To ensure the original behavior in all cases, the data region start
address is now moved inside the data section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Following the migration of the clock source configuration in DTS (commit
2691541ad2), HSI is always used as wake-up source on STM32LX. It is
reconfigured as MSI just after, but it slightly increase the wake-up
time and power consumption.
It happens as the file defining STM32_SYSCLK_SRC_MSI is not included.
Fix that.
Fixes#38807
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The interrupt config flags for an IO should be separate
from the standard IO configs because the interrupt config
is a separate API.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When CONFIG_ARM_MPU is explicitly unset in application prj.conf there
were build warnings related with implicit declarations of following
symbols: NRF_DT_GPIOS_TO_PSEL, __WFE, __SEV.
Lack of NRF_DT_GPIOS_TO_PSEL lead to build error due to undeclared
dfegpio0_gpios symbol.
The cause for the warnings and error were missing soc.h includes in
few source files. The missing includes were added in this commit.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This commit sets the minimum required Zephyr SDK version to 0.13.1,
which fixes the following critical issues:
1. Xtensa initial malloc failure (GitHub issue #38258)
2. ARMv8-M security extension vulnerability (CVE-2021-35465)
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit 9bd1483afe was added as a
workaround for the Xtensa initial malloc failure bug.
This bug has been fixed in the Zephyr SDK 0.13.1 release and therefore
this workaround is no longer needed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
k_work_schedule may return other non-negative value than 0.
When driver was adapted to the new k_work API that was not
taken into account.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The Zephyr 2.6 release notes, in the Bluetooth section, refers the user
to a commit message which had a couple of typos in it. Clarify this in
the very release notes.
Fixes#36692.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
RFC 2460 Sec. 5 requires that a ICMPv6 Time Exceeded message is sent
upon reassembly timeout, if we received the first fragment (i.e. the one
with a Fragment Offset of zero).
Implement this requirement.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The purpose of shift_packets() is to make room to insert one fragment in
the list. This is not what it does currently, potentially leading to
-ENOMEM even if there is enough free room.
To see the current behaviour, let's assume that we receive 3 fragments
in reverse order:
- Frag3(offset = 0x40, M=0)
- Frag2(offset = 0x20, M=1)
- Frag1(offset = 0x00, M=1)
After receiving Frag3 and Frag2, pkt[] will look like:
.-------.-------.-------.
| Frag2 | Frag3 | NULL |
| 0x20 | 0x40 | |
'-------'-------'-------'
pkt[0] pkt[1] pkt[2]
When receiving Frag1, shift_packets(pos = 0) is called to make some room
at position 0. It will iterate up to i = 2 where there is a free
element. The current algorithm will try to shift pkt[0] to pkt[2], which
is indeed impossible but also unnecessary. It is only required to shift
pkt[0] and pkt[1] by one element in order to free pkt[0] to insert
Frag1.
Update the algorithm in order to shift the memory only by one element.
As a result, the ENOMEM test is only simpler: as long as we encounter
one free element, we are guaranteed that we can shift by one element.
Also assign a NULL value to the newly freed element since memmove() only
copy bytes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently net_ipv6_handle_fragment_hdr() performs 2 distinct tests: it
checks the M-bit of the most recent fragment to decide if we can proceed
with the reassembly. Then it performs some sanity checks which can lead
to dropping the whole packet if not successful.
The test on the M-bit assumes that fragments arrive in order. But this
will fail if packets arrive out-of-order, since the last fragment can
arrive before some other fragments. In that case, we proceed with the
reassembly but it will fail because not all the fragments have been
received.
We need a more complete check before proceeding with the reassembly:
- We received the first fragment (offset = 0)
- All intermediate fragments are contiguous
- The More bit of the last fragment is 0
Since these conditions can also detect a malformed fragmented packet, we
can replace the existing sanity check that is performed before
reassembly. As a bonus, we can now detect and rejected overlapping
fragments, since this can have some security issues (see RFC 5722).
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently we only store the fragment offset. But in some cases it might
be necessary to also inspect the M-bit (More Fragment) of all received
fragments.
Modify the semantics of the field to store all the flags, rename the
setter to account for this change, and add a getter for the M-bit.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The special handling of the 1st fragment in unnecessary, since it will
be correctly handled even without it. Moreover it causes some corner
cases, like a single packet with a fragment header (M=0), to be
incorrectly handled since the reassembly code is skipped.
Remove the special handling of the 1st fragment to fix these problems.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently the requirement of the length being a multiple of 8 is not
tested for the first fragment, since the first fragment takes a
different path due to the goto.
Move the test earlier in the process, so that it is performed on all
fragments, including the first one.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
If we have less fragments than what can be stored in the reassembly
array, some loops will blindly dereference NULL pointers.
Add checks for NULL pointers when necessary and exit the loop.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently the stack is limited to a maximum of 2 incoming fragments per
packet. While this can be enough in most cases, it might not be enough
in other cases.
Make this value configurable at build time.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently prev_hdr_offset always equals 6, which is the offset of
the nexthdr field in the IPv6 header. This value is used to overwrite it
when removing an IPv6 Fragment header, so it will work as long as there
is no other Extension header between the IPv6 header and the Fragment
header.
However this does not work in the other cases: the nexthdr field of the
IPv6 header will be overwritten instead of the nexthdr field of the last
Extension header before the Fragment, leading to unwanted results.
Update prev_hdr_offset so that it always point to the nexthdr field of
the previous header, either the IPv6 header or an Extension header.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The current validation code waits to process the header before rejecting
it, while some checks can be already enforced when reading the nexthdr
field of the previous header.
The main problem is a wrong pointer field in the resulting ICMPv6 error
message: the pointer should have the offset of the invalid nexthdr
field, while currently it will the offset the invalid header.
To solve that problem, reorganize the loop in two parts: the first
switch validates nexthdr, while the second switch processes the current
header. This allows to reject invalid nexthdr earlier.
The check for duplicated headers is also generalized, so that we can
catch other kind of headers (like the Fragment header).
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
By definition, NET_IPV6_NEXTHDR_NONE is void. So we must stop processing
before trying to read any data, since we will start reading values that
are outside the Extension Header (likely the payload, if any).
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
When an unknown option is encountered, an ICMPv6 error message must be
sent in some cases. The message contains a pointer field, which must be
the offset to the unknown option. Currently the offset is computed from
the beginning of the option list, while it should be computed with
respect to the beginning of the IPv6 header.
Record the offset when reading the option type and pass it later to
ipv6_drop_on_unknown_option() to correctly set the pointer field. Also
rename the argument in ipv6_drop_on_unknown_option() to make the
purpose more clear.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently PADN data are not skipped, which results in the stack to think
that the next header starts in the middle of the padding. We have to
skip the bytes before going on.
Also clarify the PAD1 does not have any length field.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The current names are confusing. Indeed "nexthdr" if the type of the
header currently processed, while "next_nexthdr" is the nexthdr field of
the current header.
Rename them to improve readability and make it less error-prone.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
ICMPv6 error messages are not sent (on native_posix) because the first
net_pkt_write() returns an error.
pkt has just been allocated using net_pkt_alloc_with_buffer(). Trying to
write an empty packet in overwrite mode will result in an error. There
is no need to be in overwrite mode, since we want to write the LL
src/dst addresses at the beginning.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
There is a copy-paste error in this sample code that results
in a function for input events being called for an output pin.
By chance, this has no influence on the behavior of the sample,
as the function returns a register offset that for events and
tasks is the same for a given channel, but obviously the code
is confusing.
This is fixed by replacing the relevant part with more suitable
function calls, to also simplify the code a little.
On the occasion, also a remark is added about no button debouncing
used in the sample, to prevent users from being surprised by its
possible behavior.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Similarly to what was done on stm32g0, disable DBGMCU clock
after operation to avoid conflict with openocd.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If clock is not enabled write access on that registers are no-op.
Disable clock after operation to avoid conflicts with openocd which
can also access this clock when flashing.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable CONFIG_DEBUG when test is run in CI.
This will allow DGB access in stop modes (and specially flashing)
and avoid potential issues when test in run in a test suite.
Note that on some targets (stm32wb for instance) openocd is able
to do the same operation, and which allows to reflash the target
even if switch was not enabled, but this could not be the case
on all targets.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adding missing parenthesis. Without them wrong results
appeared when k_cycle_get_32 wrapped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes: #38463
With 6be1b2af9b then Zephyr shields and
soc Kconfig are always sourced from Kconfig directly.
However, check_compliance.py generates Kconfig files for sourcing the
same files thus sourcing the same files twice.
The end result is a lot of Kconfig warnings as described in #38463.
Removing the generated Kconfig files as this is no longer needed after
6be1b2af9b has been introduced.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38761
The introduction of zephyr_library_property in #38347 contained a
stray function call `target_compile_definitions()` resulting in the
library property name and value to also be added compile definitions to
the Zephyr library.
The Zephyr library property is an internal property and is not supposed
to be added as compile definitions, and thus this call is removed with
this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support for Quectel modem in gsm_ppp modem driver.
The CMUX cmd is based on MUX application notes v1.0(2020-09-22)
for BG95, BG77 and BG600L. Tested and working on EC21e.
As the gsm_ppp doesn't do power control, it is required to power
on the modem manually in the application.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Apply the same changes as the previous commit made in the spi_nrfx_spim
shim, to keep these two shims aligned.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to the nRF5340 PS, for 32 Mbps high-speed SPI using SPIM4,
drive configuration H0H1 must be used. The underlying nrfx_spim driver
does it properly in its initialization function, so change the shim to
(re)initialize the driver when the SPI configuration is to be changed
(only then the speed to use is known), to avoid the need of duplicating
the corresponding code in the shim itself.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to the nRF5340 PS, SPIM4 only supports 32 Mbps when
the application core is running at 128 MHz. This patch adds
the corresponding check.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The board name used in the zephyr-app-commands directive was the old
name for the Thingy52 board.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF battery sample claims that it works without the need of a vbatt
node (voltage divider). However, this was currently not possible because
the sample code did have no means to extract the necessary ADC details
(instance and channel) from Devicetree unless vbatt was present. Similar
to other ADC samples, the zephyr,user node is used to define io-channels
property in this case. The sample README has been updated with an
example of how measurement without a voltage divider can be achieved.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
GDB can be built with or without Python support. When built with Python
support this can cause a particular problem: The gdb executable relies
on shared libraries that are bound to a specific Python version. But
since most Linux distributions typically ship with a single version, it
is very difficult to choose which one to target when building GDB.
When GDB executes, if it fails to load the shared libraries it will exit
immediately with an error code of 127 and output resembling this:
/home/carles/bin/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gdb:
error while loading shared libraries: libpython3.8.so.1.0: cannot open
shared object file: No such file or directory
There are two known approaches to shipping multiple gdb executables:
- The Zephyr SDK ships a default gdb with Python enabled, and then a
separate gdb-no-py executable with Python disabled
- GNU Arm Embedded ships with a default gdb with Python disabled, and an
additional gdb-py with Python enabled
To mitigate the problem of not being able to debug, fall back to a
'gdb-no-py' if it exists whenever the standard gdb executable fails to
even run.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Refactor IPv4 multicast address to MAC multicast address conversion
into its own function, so it can be reused by drivers as it is already
possible for IPv6 multicast addresses.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
This patch fixes the issue that can cause a deadlock in shell.
When two threads simultaneously poll the TXDONE signal, only one
of them will receive it, leaving second one stalled.
The problem was that shell's context contains k_poll_event objects that
were polled by multiple threads. Polling it overwrites the poller field
that was set by previous thread.
Instead, the k_poll_event object must be created on the stack by every
thread that wants to poll the TXDONE signal.
This makes sure that no thread will be left waiting for this signal
forever.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
ptp_clock_test was failing when trying to access the ptp clock from user
mode. This was due to an arbitrary initialization priority between the
virtual PTP clock devices created by the ptp clocking test and the
physical PTP clock on the frdm_k64f board. Since the ptp test
initializes the virtual clock with the same device name as the physical
clock, if the physical clock was initialized first this test would
incorrectly reference the physical device during testing, instead of the
virtual one.
This fix simply defines the virtual ptp clock with a custom name, so
that the test will always locate the correct ptp clock.
Fixes#38731
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Ensure the GPRS connection APN settings match the PDP
context. This it best to ensure proper IP connectivity.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Ensure that the IP family is synchronized between the PDP
context and the GPRS connection.
There were cases where they could get out of sync.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Assign the IPv6 address from the LTE network to the
network iface.
Configure DNS resolver with IPv6 DNS address from the
LTE network.
Fix socket AT commands to account for IPv6 addresses.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In the DNS work callback ensure the iface is up
(on the LTE network) before trying to reconfigure the
DNS resolver with the DNS address.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When falling back to L2CAP for connection parameter updates, the
interval min and maxes should also be saved.
Fixes#38613.
Signed-off-by: Eric Johnson <eric@liveathos.com>
The stm32wl version of the sx126x driver disables the NVIC interrupt in
the radio isr to prevent retriggering while the event gets handled in
the workqueue. Since the interrupt condition is still present while the
line is disabled, the interrupt pending bit remains set in the NVIC, so
after the handler finished, when irq_enable() gets called, the interrupt
fires immediately again with no status bit set in the radio registers.
Apart from the no-op interrupt, this has the side effect of bringing
the radio out of sleep as soon as the interrupt bit are read and
cleared, which increases the idle state power consumption.
Adding a NVIC_ClearPendingIRQ() before irq_enable() seems to fix the
problem. It should not cause any issue with missing interrupt events, as
if there are pending bit on the Radio, the NVIC pending bit would be
re-set immediately.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
1. Add support for multiple syscon entries (as a side effect, this also
fixed syscon.c implementations which weren't being linked to their
syscon.h counterparts).
2. Add support for different width registers in syscon.
3. Add tests for syscon
Signed-off-by: Yuval Peress <peress@chromium.org>
Since version 1.11.0, Full stack M0 binary requires 216K of flash
being available, while previously 212K were required.
Review flash partitioning to take it into account.
Additionally:
- update value in board yaml file.
- align value in package .dtsi file
Fixes#38735
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes: #38558
This commit removes: `cmake_policy(SET CMP0079 OLD)`
This means Zephyr will now allow the new CMP0079 behavior introduced
with CMake version 3.13.
Code has now been examined and no occurences has been found where the
INTERFACE keyword was used with `target_link_libraries()` outside the
CMakeLists.txt scope where the original libraries were created.
As an additional safeguard `./scripts/twister -c -N --cmake-only`
has been executed before and after this change and all `build.ninja`
files for each test / sample have been diffed.
Removing the CMP0079 policy creates identical build files, hence removal
of the old policy will not impact the build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
bsim test build system hides compile warnings.
This commit adds extra cc flags to prevent this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Currently we are using mxcsr register with the bit 6 DAZ enabled.
When the denormals-are-zeros flag is set, the processor
converts all denormal source operands to a zero with the sign
of the original operand before performing any computations on them.
It causes bugs in the SIMD XMM registers computation like #38646
I suggest to disable Denormals-Are-Zeros flag and mask division-by-zero
exception.
Set value to the default 1F80H according to the Intel(R) 64 and IA-32
Architectures Software Developer's Manual.
Fix will let all x86 boards perform SIMD computation using XMM
registers in the correct way.
Fixes#38646
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
When the sof module code was build, it was found that
PI was not defined in the minimal library.
Here are some mathematical constant definitions to avoid build errors.
Signed-off-by: Yang XiaoHua <yangxiaohuamail@gmail.com>
These are the only two display drivers initializing in APPLICATION.
Dependency exposed with LVGL with initialization at same level and
priority.
Fixes#38690
Signed-off-by: David Leach <david.leach@nxp.com>
When using the IEEE802154 radio interface in CONFIG_IEEE802154_RAW_MODE,
there is no way to handle ack frames because of the dummy implementation
of ieee802154_radio_handle_ack() in the ieee802154_radio header file.
Removed the dummy implementation from the header so you can/need to
implement it in the application.
samples: added implementation of ieee802154_radio_handle_ack() to
wpan_serial and wpanusb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
The NPCX I2C implementation contains two modules, an I2C port and an
I2C controller. Disable the I2C controller nodes by default and require
the user to enable both the I2C port and controller in the devicetree.
Signed-off-by: Keith Short <keithshort@google.com>
Now that SDK 0.13.1 is released bump buildkite & github workflows
to use this SDK version and the docker image that has it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When calling ull_conn_iso_cis_stop with no pending LLL events,
cis_disabled_cb may be called recursively if more than one CIS is
associated with a disconnecting ACL connection.
To prevent ticker_stop being called more than once, it shall be
registered at entry of cis_disabled_cb whether this is the last CIS.
Only then shall ticker_stop be called.
Signed-off-by: Morten Priess <mtpr@oticon.com>
CIS LLL events pending was checked incorrectly using a
mayfly incorrect set to be called from ULL LOW context,
but the actual call was from ULL HIGH context.
Beside this, the code was refactored to have file static
functions after global scope functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a typo bug where sercom5 pinctrl has pad2 and pad3
has duplicated pads for pb0/pb2 and pb1/pb3.
Per the datasheet, pb2 and pb3 should be pad0 and pad1 respectively.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
The TensorFlow Lite module makes use of the features provided by the
standard C++ library (e.g. `#include <functional>`), so the standard
C++ library config must be enabled for it.
This used to work without `CONFIG_LIB_CPLUSPLUS=y` due to the bug
described in the issue #36644.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `nostdincxx` C++ compiler property for GCC, which
is specified when the C++ standard library (`CONFIG_LIB_CPLUSPLUS`) is
disabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new C++ compiler property `nostdincxx` which
specifies the C++ compiler flag for excluding the C++ standard library
include directory from the include paths.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When CONFIG_PM_DEVICE_RUNTIME is enabled, if a pin is configure as
input after an output pin has already being configured the device is
wrongly suspended.
Fixes#38433
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that we're clearer around pm constraints management in various
TX cases (poll streams, irq driven or async), make some code
simplifications to ease readability.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Introduce new logic to set/release pm_constraint during serial TX
transactions.
First change is to introduce an internal flag and utility functions
to control the set/release constraint balancing per uart device.
This way, whatever the mix of transactions or API calls, we
ensure a single uart device can only do 1 or 0 to the PM state
constraint. Constraint can't then be set more than once, released w/o
having been set or released more than it was set.
The last part of the change reworks the triggers for constraints
set/release operations.
In order not to disturb driver operations, if irq driven mode or PM is
enabled, don't enable TC interrupt handling by default.
Instead, map the pm_constraint setting to the way TC flag is handled
in normal mode of operations (irq driven or async).
As a consequence, in irq driven mode, pm_constraint is set/released on
tx_enable/tx_disable api calls, which gives API user full control
on transaction protection vs low power operations.
Finally, we emulate the same behavior on TX poll transaction, by
enabling TC irq at the start of a stream and disabling TC irq once
stream is completed. This is controlled with a dedicated device flag.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
During review of #38681, switching from HAL to LL,
involuntarily enable DBGMCU clock instead of DMA clock.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
In case LwM2M server or bootstrap server rejected
Registration/Registration Update/Deregsitration attempt, there were no
reasonable notification to the application. Fix this by reporting
LWM2M_RD_CLIENT_EVENT_*_FAILURE in such case.
Addtitionaly, remove pointless ENGINE_DEREGISTER_FAILED event, which
have no use in the state machine.
Finally, simplify the response code logging to prevent code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TWIM peripherals cannot perform write transactions from buffers
located in flash. The content of such buffers needs to be copied
to RAM before the actual transfer can be requested.
This commits adds a new property (zephyr,flash-buf-max-size) that
informs the driver how much space in RAM needs to be reserved for
such copying and adds proper handling of buffers located in flash.
This fixes an issue that caused that e.g. the DPS310 sensor driver
did not work on nRF SoCs that only have TWIM, not TWI peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Issue an error logging message when the i2c_nrfx_twim driver lacks
a concatenation buffer big enough to properly handle a call to
i2c_burst_write() function, to give the user a hint what is wrong.
Also use by default a 16-bytes long concatenation buffer for every
instance of the i2c_nrfx_twim driver. Such value should cover most
of the simple uses of the i2c_burst_write() function, like those
in the stmemsc sensor drivers, and when a longer buffer is needed,
the user will be provided with the above message pointing to the
property that should be adjusted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace the old master and slave prefixes with the new central and
peripehral ones from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the documentation for the Renesas H3ULCB board.
It document features that have been merged
during v2.7 windows and before.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
On some STM32 boards, for unclear reason,
RTT feature is working with realtime update only when
* one of the DMA is clocked
and sometimes also
* one of the DBGMCU bit STOP/STANDBY/SLEEP is set
Fixes#34324
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
It happens that CM7 wakeups CM4, before CM4 goes to sleep.
Thus when CM4 goes to sleep,
there no more wakeup from CM7. And CM4 hangs.
For a simple synchronisation implementation,
CM4 doesn't go to sleep any more,
instead it waits (active wait) for CM7 to take HSEM
(meaning that clock configuration is finished).
Fixes#38069
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
On STM32L0, there are some hardfault when DBGMCU bit Sleep, Stop
or Standby are enabled. See #37119
For unclear reason, enabling DMA clock fixes this issue.
(similarly than #38561, DMA clock comes with DBGMCU bits)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
If CYC_PER_TICK does not divide the (now - last_count) quantity exactly with integer math, the subsequent multiplication before incrementing last_count causes a drift. This commit eliminates the redundant division-followed-by-multiplication and fixes https://github.com/zephyrproject-rtos/zephyr/issues/37852
Signed-off-by: Berend Ozceri <berend@recogni.com>
This test makes use of dynamic RAM allocation done on the leftover
SRAM. Similarly to test/posix/eventfd, limit this test execution on
platforms with at least 32K of RAM available.
Fixes#38601
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
C implicit promotion rules will want to make floats into doubles very
easily. Zephyr build will generate warnings when this flag,
`-Wdouble-promotion`, is enabled with GCC
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
In k_mem_paging_eviction_select(), the returned dirty bit value
may not be actually associated with the page selected, but
rather the last page examined. So fix this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit updates the Zephyr build system such that it does not
include the `zephyr_stdint.h`, which tries to define Zephyr's own type
system, when compiling for the native POSIX architecture.
The native POSIX architecture compiles with the host toolchain and
headers, and there can be conflicts if we arbitrarily define our own
type system (e.g. mismatch between the types and the specifiers defined
in `inttypes.h`).
Note that this is not meant to be a permanent fix; instead, it is meant
to serve as a temporary workaround until we no longer need to define
our own type system.
For more details, refer to the issue #37718.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth shell implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid hitting the following violation:
Violation to rule 5.7 (Tag name should be unique)
Replace the use of "shell" in the shell as an instance of a pointer to
const struct shell.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix power-save-mode (PSM) operation.
When in PSM, do not bring the networking interface down
when an out-of-coverage event occurs.
When PSM goes into hibernate, this will cause an
out-of-coverage event to occur, even though the device
still has access to service.
Keeping the networking interface in the up state
allows an app to send data whenever it needs to.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Remove the HL7800 DTR device tree binding because the
DTR IO is not needed for operation of the HL7800
modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using DTR to control sleep modes is a legacy mode
of operation. Remove control of DTR IO.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Sleep mode 0 (driven by DTR) is only recommended for use
as a legacy option.
Sleep mode 1 is recommend by Sierra Wireless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
From 2.4 to 2.7 the net samples pair echo-server/client increase the
SRAM requirements. This adjusts example features to free necessary SRAM
to run example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The Counter resource in the IPSO Push Button object was incremented
silently by the post write handler of the State resource. This prevented
the resource from being marked as updated, effectively preventing
the engine from sending notifications to observers.
Fix this, by setting the new counter value with `lwm2m_engine_set_u64()`
instead. This will update the resource value, and trigger the engine to
send notifications if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit corrects the DMA channels for the asynchronous
UART API testing support on the SAM R21 Xplained Pro board.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
uart_sam0_dma_tx_done callback triggers when the last byte
is transferred from the tx sram buffer to the sercom DATA register.
However the byte has yet to be transmitted completely which can lead to
incorrect event handling if UART_TX_DONE is expected to signal
the end of transmission.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Fixes a compile error for the err_check function not being found if
if CONFIG_UART_INTERRUPT_DRIVEN is not enabled.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
fixes peripheral drivers such as async uart that rely on dma being
ready failing because dma is not initialized yet.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Includes support for USB, CAN, ADC, DAC, and Arduino GPIO Map.
Future could support: ETM Trace (if Zephyr supports it), QSPI, FMC, DCMI
Initially based on closest BSP for the same SoC: nucleo_f446re
Extra peripherals added based on closest BSP for nucleo-144 board:
nucleo_f429zi
Checked against nucleo-144 schematic
Documentation updated as best as I could
Arduino compatible pinmux for SPI, UART and I2C via Zio header
Tested:
USB Device mode (samples/subsys/usb/console)
Console via ST-link usart3 (samples/hello_world)
user LEDs (samples/basic/blinky)
scripts/twister --device-tests -p nucleo_f446ze
Not tested but should work: SPI, I2C, CAN, ADC, DAC
Not working yet: Quad-SPI (missing in dts/arm/st/f4/stm32f4.dtsi)
Co-authored-by: Alexandre Bourdiol
<50730894+ABOSTM@users.noreply.github.com>
Signed-off-by: Tom Owen <tom.owen@zepler.net>
This patch fixes wrong PLIC irq number of UART and SPI for SiFive
FU740 on HiFive Unmatched. Use samples/subsys/console/echo for
testing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to set/reset the oversampler (OVSE bit)
and set the Oversampling ratio (OVSR bits) in the ADC_CFGR2 register
only when ADC is disabled or enabled without conversion on going.
Then is the ADC re-enabled.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to write the Data resolution (RES bits)
in the ADC_CFGR1 register only when ADC is disabled (ADEN=0).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adding test for features that are now available on h3ulcb.
We are ignoring isotp tests because of the internal loopback
implementation of the R-Car CAN controller which is sending
Rx isr before sending the Tx isr, totally confusing the Zephyr
ISOTP state machine and causing false positive.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add an array similar to the bt_conn (ACL/L2CAP)
tx sent callback, and initialize it.
This increases the number of bt_conn_tx available
such that ISO does not take any of "L2CAP's" buffers,
but also ensures that the sent callback is called
for a broadcast iso only build.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the file variable val is not initialized,
causing the variable stack_ptr, pos, points to uninitialized data.
Initialize the variable val according to the code and commits.
Fixes#37916
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
A bug fix release with many zephyr with the most significant being a
workaround for the RTT issue we had in the previous release, fixing
the locking problem which could
result in garbled data when using high frequency processors.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
AMP functionality was removed from the v5.3 specification. Remove
AMP-related macros since they no longer map to anything in the spec
itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the definiion of Common Extended Payload Format data
field in the PDU definitions to be zero-length array,
because PDU size are configurable and to avoid allocations
being made using these PDU structs.
Corrected the extended scan response length check code to
use the correct define instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising stop on duration by using the
ticks_drift which now includes the random delay and any
ticker rescheduling of advertising radio events due to
collision with other radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The ticker `ticks_drift` is propagated via the ticker
elapsed callback, in order to provide necessary information
to correctly calculate total elapsed durations by states and
roles that use ticker extensions to mitigate scheduling
collisions by drifting within a permitted window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The function usdhc_board_access_init was returning a non-zero
value as the variable "ret" is also used to store the GPIO
level for card-detect.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
HTTP_DATA_FINAL was incorrectly notified in case Content Length field
was present in the HTTP respone - in such case it was set for every
response fragment, not only the last one.
Fix this by relying on `message_complete` flag instead of
`http_should_keep_alive()` function to determine whether to notify
HTTP_DATA_FINAL or not. As the HTTP parser calls the
`on_message_complete()` callback in either case (response is chunked or
not), this seems to be a more reasonable apporach to determine whether
the fragment is final or not.
Additinally, instead of calling response callback for
`on_body`/`on_message_complete` separately, call it directly from
`http_wait_data()` function, after the parsing round. This fixes the
case when headers were not reported correctly when the provided buffer
was smaller than the total headers length, resulting in corrupted data
being reported to the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Tests are reported as skipped if they are only being built. Fix this by
checking for the correct status.
Fixes#37475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit mainly aims to fix the blinky example path and also brings
minor improvements in other areas like adding example path for Linux so
that new users will know exactly what or where to look for.
Signed-off-by: Dhruva Gole <goledhruva@gmail.com>
The net_core device initialization has a subtle dependency
on the PTP clock initialization. Adding a Kconfig and set
it to a priority level less than net_core. This will ensure
the initialization sequence.
Fixes#38571
Signed-off-by: David Leach <david.leach@nxp.com>
The helper function to conver 32-bit binary float value to
float32_value_t incorrectly identified the "hidden" bit, resulting in
invalid conversion when TLV encoding was used to write a resource
(the output value was divided by 2).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There were several issues preventing JSON format writes to work
correctly:
1. The formatter wrongly assumed that Base Name and Relative Name values
read from the message are NULL terminated, which in result could give
invalid results when combining them.
2. The formatter wrongly assumed that Relative Name is always present,
which is not always the case. In result, it failed to parse messages,
which contained full path in their Base Name Field
3. There were no boundaries check when reading JSON variable name/value,
which could lead to buffer overflow in case malformed data was
received.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Just like plain text, JSON parser ignored leading zeros after decimal
point, giving invalid results. Fix this in a similar way as for the
plain text.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Floating point parser for plain text format was parsing floats wrongly,
ignoring leading zeros after decimal points.
Fix this, by reusing atof32() function, already avaialbe in a different
part of the engine, which did the parsing correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to the specificaion, resources are not predefined to use 32 or
64 bit floating point numbers, but should rather accept any of them (as
indicated by the size of the TLV in the message). This lead to issues
for instance with Eclipse Leshan LWM2M server, where Leshan sent 64-bit
value, while Zephyr expected 32-bit, making it impossible to write
the resource.
Therefore, unify the float usage to 32-bit float representation and fix
the TLV parsing functions, to accept values sent as either 32 or 64 bit
float.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `poll()` function did not report POLLHUP if the peer ended the DTLS
session, making it impossible to detect such event on the application
side.
On the other hand, TLS erroneusely reported POLLHUP along with each
POLLIN event, as the 0 returned by the `recv()` socket call was
wrongly interpreted (it was expected to get 0 in return as 0 bytes were
requested).
Fix this by introducing a helper function to process the mbedtls context
and verify if new application data is pendingi or session has ended.
Use this new function in the poll handler, instead of a socket `recv()`
call, to remove any ambiguity in the usage, for both TLS and DTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Notify the application when DTLS client session ends by returning
ENOTCONN on such event. Additionally, reset the mbed TLS session
structures, allowing to reinstante the session on the next send() call.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ECONNABORTED was returned in case tls_mbedtls_reset() function for
resetting session failed, which can be caused by memory shortage. Return
ENOMEM instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
MCUboot fork was updated in order to bring bugfixes from its
upstream:
- introduce MCUBOOT_CPU_IDLE() for support low power single thread
(fixes single thread power consumption)
- Allow not working secondary image device and boot form primary
device if image available
- fixes memory alignment of the RAM buffer that is used to temporarily
store data during swap.
- update devicetree py package lib files include path in assembly
- serial recovery: cbor_encoder: fix str encoding macros
- zephyr: Kconfig: fix board references
- do not set defaults for LOG_IMMEDIATE Kconfig
- boot: Do not use `irq_lock()` if using arm cleanup
- Kconfig: fix deadlock on cryptolib selectors
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fix Periodic Advertising Sync Establishment to accept
synchronization establishment to device listed in the
Periodic Advertisers List when filter policy was used.
Fixes#38520.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The IMXRT685 evaluation board uses a PMIC to reduce the signalling
voltage for a connected SD card to 1.8V, which Zephyr does not currently
support. This results in Zephyr failing to interface with any SD card
that supports 1.8V signalling when run on the RT685 eval board. This
commit disables support for 1.8V signalling for the RT685.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Snprintf calls should be avoid when not necessary, instead snprintk
should be used as it offers the same functionnalities at a lower cost
in flash.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
there is a memory hole from address 0x10000000-0x12150fff
in the ram on up_squared, we don't have access to read/write
this range, so limit the memory range below 0x10000000.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Fix incorrect calculation of received common extended header
length. Due to this a zero length advertising data is
reported in Extended Advertising and Periodic Advertising
report as one byte AD data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The sample from samples/drivers/misc/ft800/ causes twister to
timeout as it has no pass conditions defiend nor producess any
output that can be verified. What is more, it requires a shield
which is not reflected in the sample.yaml. This fix sets test harness
to display and adds an entry for the required fixture.
Fixes: #38536
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add #defines for the maximum and minimum allowed values for object
IDs.
Moves the #define for the directory listing object ID to the public
header file
Having these limits available is useful for applications wanting to
ensure they pass in (or handle) valid object ID values.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Object IDs are 48 bits, but are often carried in uint64_t variables.
This commit defines a mask value that retains the least significant 48
bits.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds FMAC HAL and LL drivers to the Kconfig system
Required to enable Filter Math Accelerator (FMAC)
on STM32G4/H7 devices
Signed-off-by: Tom Owen <tom.owen@zepler.net>
Zephyr SDK now features an openocd version compatible
with stm32g0 targets.
Set openocd as the default zephyr runner for this target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Zephyr SDK now features an openocd version compatible
with stm32g4 targets.
Set openocd as the default zephyr runner for this target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For some unknown reasons, using the new modified HPET timer would
render shell unresponsive under QEMU. So for now, disable QEMU
icount when shell is enabled.
Fixes#37672
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the NXP HAL to bring in fix for the FlexCAN driver on the NXP
Kinetis MKE1xF.
Fixes: #38442
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add a warning if the image is unconfirmed. Add a delay before rebooting
so that the user knows what happened.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The current HAWKBIT_PROBE & HAWKBIT_PROBE_DEPLOYMENT_BASE response
handlers aren't able to handle multipacket response from Hawkbit
server. This commit fixes it by using the implementation from
HAWKBIT_DOWNLOAD.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
Twister was failing for samples/drivers/audio/dmic with timeout
because there were no pass conditions defined. This patch sets
harness to console and adds regex entries to be checked.
Fixes: #38532
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Call __reset instead of directly calling __initialize from the common
RISC-V privileged SoC vectors __start. This allows injection of SoC
specific reset code just after setting up the machine trap vector.
RISC-V privilege SoCs without the need for custom reset code can set
CONFIG_INCLUDE_RESET_VECTOR=y to include a __reset stub which simply
calls __initialize.
Fixes: #38396
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
net_packet_socket_input() was changed to hardcode the return of
NET_CONTINUE and that caused a segmentation fault/crash in
net_core/process_data(), in cases when pkt was unreferred and
NET_OK was returned from net_conn_input()
This happened with socket combo of: AF_PACKET+SOCK_RAW+IPPROTO_RAW.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
CONFIG_PM_DEVICE was a de-facto requirement when enabling CONFIG_PM=y
since some device, i.e. UART, used the PM device hooks to block
suspension process while the device was busy finishing transmission.
This has now been fixed using constraints, so CONFIG_PM=y can be enabled
without further requirements.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extracted new Kconfig file for the Extended Advertising
and for the Bluetooth Isochronous Channel from the
Bluetooth subsystem Kconfig.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The BAS serivce Kconfig uses now a log template instead of
defining logger configuration itself.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The nbr_lock var actually depends on CONFIG_NET_IPV6_NBR_CACHE
(not CONFIG_NET_IPV6_ND), so move its initialization call.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
If one of AUX_CHAIN_IND is not received properly we need to send an
extra report over HCI to indicate that data are incomplete.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
According to reference manual, use of TC is "to avoid corrupting the
last transmission when the USART is disabled or enters Halt mode.". It
is safe to remove it since it is not checked when CONFIG_PM=n.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In the current implementation the STM32 UART driver required to enable
`CONFIG_PM_DEVICE` when `CONFIG_PM=y` to function properly. The main
reason is that in some situations, like in polling mode, transmissions
are not fully synchronous. That is, a byte is pushed to the _queue_ if
it is empty and then the function returns without waiting for it to be
transmitted to the wire. This makes sense to make things like per-byte
transmission efficient. However, this introduces a problem: the system
may reach idle state, and so enter low power modes before the UART has
actually finished the last data in the queue. If this happens,
communications can be interrupted or garbage data may be put into the
UART line.
The proposed solution in this patch uses PM constraints to solve this
problem. For the IRQ/DMA case it is easy since we can set the constraint
before transmission start, and when the completion (TC) interrupt is
received we can clear it. However, the polling mode did not have the
capability to signal the completion. For this case, a simpler IRQ
routine is provided to just release the constraint. As a result, the PM
hooks are not required and so system can operate with just `CONFIG_PM`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
BT_SECURITY_LOW and etc. were previously renamed and are no longer
valid.
The original rename is in the following commits:
1c48757d94 (New names, deprecate old)
5f2a9ba8e4 (Remove deprecated names)
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemiconductor.no>
Since commit 718c77a4cd ("dts: arm: stm32f0 soc serie has dma of type
V2bis"), the DMA DT cell of STM32F0 MCU has been fixed. It now has three
elements instead of five previously.
This patch fixes the dma property used in nucleo_f070rb.overlay
accordingly.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Moves the Ethernet PHY reset routine on mimxrt1xxx_evk boards to execute
in the POST_KERNEL initialization level rather than the PRE_KERNEL_2
level because it relies on a kernel service, k_busy_wait(). Leverages
the existing CONFIG_PHY_INIT_PRIORITY to allow users to configure when
within the POST_KERNEL level this routine occurs, which by default is
set correctly to the following order:
Init Function Init Level Priority
--------------------------------------------------------------------------------------
sys_clock_driver_init PRE_KERNEL_2 CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
mcux_igpio_##n##_init POST_KERNEL CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
mimxrt1064_evk_phy_reset POST_KERNEL CONFIG_PHY_INIT_PRIORITY=70
eth_init POST_KERNEL CONFIG_ETH_INIT_PRIORITY=80
net_init POST_KERNEL CONFIG_NET_INIT_PRIO=90
This fixes an issue that was introduced in commit
f0b3146ff5, which caused the system timer
to be initialized after the Ethernet PHY reset. As a result, the
k_busy_wait() never returned and the kernel never finished booting. The
serial driver never initialized and there was no output on the console,
not even a boot banner.
Tested on the mimxrt1064_evk board with samples/net/dhcpv4_client.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Do not set DLAB bit in Line Control Register when the access to
the baud rate divisor registers is not needed.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
TI Hal has its own constraint API that is used by its drivers. These
constraints need to be correlated with Zephyr constraints to be
constraints set in the HAL be visible on Zephyr and vice-versa.
Fixes#38362
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Implement constraint API as weak symbols so applications or platform
can override them. Constraints are a high-level abstraction to inhibit
the power subsystem of using certain power states. Some platforms can
have their own way to set/release constraints in their drivers that
are not part of Zephyr's code base.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
z_pm_save_idle_exit() is only declared if CONFIG_PM is enabled but
unconditionally defined. Just move it around in the header to always
be declared.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Create stubs for when the subsystem is not compiled. Some drivers need
to use constraints when are in the middle of a transaction to avoid
the system to sleep. As the same driver may be used in a target that
does not support power management, they have to conditionally (#if
CONFIG_PM) call these functions, these stubs avoid this regular problem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The priority of the LPTim interrupt on each stm32 soc
is put at the same level as the SysTick. This priority
level is given by the system Handler priority reg
(SHPR3) when the PM is not configured.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixes: #37637
toolchain_parse_make_rule() parses depfiles and converted `\\` to the
CMake list separator `;`.
However, gcc -M might create depfiles with windows path separator `\`
causing this conversion to fail, as a path like:
c:\...\zephyr\samples\drivers\led_ws2812\nrf52-bindings.h
resulting in a file list as:
c:;...;zephyr;samples;drivers;led_ws2812;nrf52-bindings.h
which results in a CMake configure dependency to be added to `C:`.
As C: is always newer than the build.ninja file, this resulted in
continues CMake re-invocation.
As a small side-note, the `\` in file name did only occur in situations
where a relative past had been used elsewhere in the build system, such
as here:
https://github.com/zephyrproject-rtos/zephyr/blob/\
c3050a5aab1e86d02642eb4c6a027419e6a3a096/samples/drivers/led_ws2812/\
boards/nrf52dk_nrf52832.overlay#L9
To ensure proper handling of files, then all files are converted to
CMake paths, that is with forward slashes: `/`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit removes the `z_` prefix from the stdio syscall functions
(`z_zephyr_write_stdout` and `z_zephyr_read_stdin`) since it is
redundant and does not align with the convention used by the equivalent
minimal libc syscall functions (e.g. `zephyr_fputc` and
`zephyr_fwrite`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The newlib `write()` and `read()` functions must call the
`z_zephyr_write_stdout()` and `z_zephyr_read_stdin()` syscall functions
in order to function properly in a user mode context.
The existing incorrect implementation was copied off the newlib hooks
implementation, which was corrected in the previous commit.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit 4344e27c26 changed the syscall
function invocation in the `write()` and `read()` functions to the
direct syscall implementation function invocation by mistake.
The newlib `write()` and `read()` functions must call the
`z_zephyr_write_stdout()` and `z_zephyr_read_stdin()` syscall functions
in order to function properly in a user mode context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This patch is testing the test_sleep_abs with a longer
real time slot value. The reason is that for platforms
like stm32wb55rg with PM, the real time slot must be adjusted
because of the LPTIM ticker.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In the case of native_posix (and other "host" toolchain based
platforms) Twister shouldn't filter tests by ZEPHYR_TOOLCHAIN_VARIANT.
The PR replaces `- zephyr` with `- host` in native_posix(_64).yaml
and modify the filter in twisterlib.py to not block building
if "host" is under the platform supported toolchains.
Fixes: #38418
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add CONFIG_XTENSA_SMALL_VECTOR_TABLE_ENTRY
for NXP_ADSP_IMX8 board to bypass the size
constraint of the interrupt vector table entry.
Fixes#38216
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
For some platforms, like NXP's IMX8 or Mediatek's MT8195,
the size of an interrupt vector table entry is 0x1C bytes,
less than usual (0x30 for Intel's platforms).
So, the interrupt handlers don't fit in the vector table
entries.
I've added a small indirection to bypass this size
constraint and moved the default handlers to the end
of vector table, renaming them to
_Level\LVL\()VectorHelper.
For this, I've added a generic configuration -
XTENSA_SMALL_VECTOR_TABLE_ENTRY.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
When CONFIG_USERSPACE is turned off, the POOL_SECTION will be located in
.data section. This will increase the target binary size. Since the
memory pool is for malloc() use and it doesn't need for initial values,
locate it in the .bss section to reduce binary size.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: Iee52ac06a48414c083518c79775fe31334eab674
Since it's not possible to encode full range of 64-bit unsigned integer,
remove this type from the LwM2M implementation, and replace its uses
with 64-bit signed integer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the resource values represented by the unsigned integers were casted
to integers of a corresponding size in the read handler, they were not
ecoded properly if the unsigned value was larger than the maximum
integer value of the corresponding size (i.e. they were encoded as
negative values).
Fix this by casting the unsinged value to a wider integer type, to
prevent incorrect interpratetion of the data provided. The TLV encoding
functions take care of the optimization (i. e. encoding integers on the
minimum number of bytes needed), so it should prevent bandwith waste if
the unsigned value would actually fit into the integer of the
corresponding size.
Similar case is for the write hander, where unsigned integers encoded at
8 bytes were not processed correctly. Fix this by using wider decoder as
well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Listing a neighbour table with "net nbr" command, when a neighbour w/o
assigned link address was present, resulted in an assert condition. Add
additional check to prevent this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the BOARD_RUNNER_ARGS_${runner_id} variable contains anything, add
it to the global property of the same name with all the final runner
args from board_runner_args() and friends.
This allows use cases like this:
west build ... -- -DBOARD_RUNNER_ARGS_jlink="--some-jlink-arg"
The ${runner_id} part is the runner's name converted to a C
identifier, i.e. with special characters changed to underscores.
So e.g. the 'dfu-util' runner would use BOARD_RUNNER_ARGS_dfu_util.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The test assumed initial equality between CLOCK_MONOTONIC and
CLOCK_REALTIME and also assumed coarse granularity for each clock.
Neither of those assumptions are solid.
Furthermore, the test failed on multiple vendor boards which caused
some concern.
Remove the poorly conditioned tests and remove some comments
/ printks.
Fixes#35703
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
TCP state machine gets stuck in TCP_FIN_WAIT_2 state
when server responds with [ FIN, PSH, ACK ]
Fixes#37842
Signed-off-by: Nicolas Marty <nicolas.marty@zuehlke.com>
Using zsock_ in http_client instead of the POSIX API versions of the
functions allows the usage of http_client in combination with
CONFIG_POSIX_API.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
When enable thread awareness feature for OpenOCD the search path was
converted to a list. In some environments OPENOCD_DEFAULT_PATH may
not be defined. That create an empty search path list system fails.
This add a test to skips fill search_args with openocd_search values
when list is empty.
Fixes#38272.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When using the stack fork type in the philosophers sample,
there were a few pointer type mismatch since the k_stack_*()
functions are using stack_data_t but the parameters are uint32_t.
So cast them to void pointer to suppress compiler warnings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa does not store the stack pointers in thread objects but
pushing the registers into the stack. There is no fixed location
to retrieve the stack pointer so mark it as unimplemented to
avoid the #warning.
Fixes#38405
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When the application sets more than 251 bytes of advertising data,
the data is sent over multiple HCI commands.
This is only allowed if the advertiser is not running
as defined by the HCI specification.
The data is sent to the controller one AD-field at the time.
If an AD-field is larger than BT_HCI_LE_EXT_ADV_FRAG_MAX_LEN,
the data is split over two commands.
This introduces some additional complexity.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
add a bitarray into struct osThreadDef_t to indicate whether the
thread is used or not, then we can get the first available thread
by searching this array when creating a new thread, and update this
array to add a free thread when terminating a thread.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
BTP change extended L2CAP_CONNECT command by ECFC flag, which determines
which connection procedure is used (non-enhanced or ecred). Now, only
this flag determines the procedure used, not number of requested
channels.
This was affecting L2CAP/ECFC/BV-25-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The overview at the top of the page only listed ble and serial as
available transports. This commit adds udp to this list.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This commit disables the "minimum required newlib heap size" check for
the newlib thread safety tests since they do not make use of any newlib
functions that require large heap.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If the count is zero in the heap_malloc_free test, a div by zero
would happen, so add a condition to handle this potential error.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Add some tracing functions to fix that the samples/tracing code
cannot generate coverage by twister.
Fixed#38323
Signed-off-by: Lixin Guo <lixinx.guo@intel.com>
stm32f411 includes stm32f401 which do already correctly define spi4
The definition in stm32f411 was missing a clock attribute
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
stm32f410, stm32f411 and stm32f412 enable the SPI5 device with
bit 20 on the APB2 clock
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
In commit "pm: Fix weak linkage symbols" (PR #35274),
PM SoC hooks were converted to __weak to avoid clash with
new definition of these symbols in subsys/pm/power.c.
G0 power implementation was implemented in parallel
with this change and missed the update.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cadence XCC is based off of a very old 4.2 gcc compiler, which didn't
perfectly support C99 "inline" semantics with respect to
cross-translation-unit inline linkage (which Zephyr does not use, our
inlines are static only) and declaration order.
Fix the one spot where we were calling an inline before its
ALWAYS_INLINE definition, and add a flag to suppress the warning so
CI's trying to build with XCC and -Werror don't flip out.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Older binutils, like the (nine-year-old!) 2.23 version that powers
many Cadence XCC toolchains, happen not to support the "~" operator to
perform bitwise negation. And they generate an absolutely hilarious
series of inscrutable error messages when they try to tell you this
fairly simple fact.
Just fold it into the constant.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Due to a historical error introduced during an hci_uart refactor, the
get_len() function was using the wrong HCI H4 packet identifier for
commands. Instead of using H4_CMD (0x01) it was trying to match
BT_BUF_CMD (0x00).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This function wasn't being defined when SMP_BOOT_DELAY was set or when
SMP wasn't enabled. There's no reason for either, then function
doesn't depend on any kconfig-dependent build-time state, and (given
that we use -ffunction-sections) it won't appear in output binaries
unless called.
And there are use cases (e.g. z_smp_start_cpu()) where we need that
function even when BOOT_DELAY is enabled.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Th Configuration Server should respond with and Invalid AppKey Index
status code when the AppKey identified by AppKeyIndex is not known to
the node or is not bound to the model identified by the ModelIdentifier.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
When the MSI clock is selected as source on the stm32wbx device,
the MSI has a range to choose the MSI input frequency.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
ARC MWDT libraries require to implement locking interface
otherwise not all of functionality is guarantee to be
thread-safe.
So, let's implement locking interface.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
When affinity routing is enabled for Non-secure state
( GICD_CTLR.ARE_NS is '1'), need to set routing information
for the SPI interrupt.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
A check for valid_chan_io_qos in big_init_bis was missing
a negation when checking for invalid parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The equality check for remap was not being performed since the local
variable remap was assigned to the value being checked just before the
check. Some minor simplifications have been performed (fixed variable
types).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit now sets the Zephyr library property `ALLOW_EMPTY` to
silence the warning:
`No SOURCES given to Zephyr library: drivers__interrupt_controller`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This introduces a dedicated zephyr_library_property() function which
provides a common way to set Zephyr build system known properties on
Zephyr libraries.
As a first common property is the `ALLOW_EMPTY` property which allows
to create a `zephyr_library()` without putting any content inside of it.
In general libraries should not be created unless there are files to
places inside of it, however in some cases there are so many
`zephyr_library_sources_ifdef(<setting> <file.c>)`
where testing each setting before creating the library may not be
desired.
This commit allows the following construct in those cases:
```
zephyr_library()
zephyr_library_property(ALLOW_EMPTY TRUE)
zephyr_library_sources_ifdef(CONFIG_SETTING_1 file_1.c)
zephyr_library_sources_ifdef(CONFIG_SETTING_2 file_2.c)
...
zephyr_library_sources_ifdef(CONFIG_SETTING_n file_n.c)
```
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The conn_callbacks was duplicated in the file, due to a missing
delete when BT_CONN_CB_DEFINE was introduced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For twister, when simulation is mdb-nsim, the platform is
nsim_hs_smp. Before the twister will call west falsh
when platform is nsim_hs_smp, because twister can't kill
cld process, now this problem has been fixed
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Add nsim_sem_mpu_stack_guard.props and
nsim_sem_mpu_stack_guard.args, so we don't
do workarounds in cmake code.
Signed-off-by: Jingru Wang <jingru@synopsys.com>
It may be needed to run Zephyr at EL1NS level with `CONFIG_ARMV8_A_NS`
In order to run at EL1NS, you'll need a proper Firmware loaded in the
FVP model to run Zephyr at non-secure EL3.
The ARM TF-A for FVP can used to run Zephyr as preloaded BL33.
This adds the necessary cmake scripts to load the TF-A binaries and
load Zephyr as preloaded BL33 payload.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The struct stm32_pinmux_conf structure (and stm32_pin_func_t type)
are not used, so remove them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix assert at line 1085 in ull_adv_aux.c due to auxiliary
offset calculation scheduling on ticker timeout under must
expire which can happen for overlapping multiple advertising
sets without previous calculation not complete, a single
mayfly instance is used hence the assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To check security of connection in read_value() we need to actually
pass connection not NULL.
This is affecting GATT/SR/GAR/BI-11-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The commit adds CONFIG_IMG_MGMT_DIRECT_IMAGE_UPLOAD that allows
to turn on the direct image upload.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The val2 calculation was done using (1000000 / 40960) as
multiplying factor, which was sometimes leading to a
int32 overflow. So, let's use the equivalent (but smaller)
(3125 / 128).
Fix#38090
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enables the mcux ethernet driver and pin muxes on the
mimxrt1024_evk board in the same way as is done on the
mimxrt1020_evk and mimxrt1050_evk.
Documentation updated accordingly.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
cte_info_clear function is responsible for remove of CTE from
periodic advertising PDUs, including remove from optional chained
PDUs. The function uses subortinate function rem_cte_info_from_per_-
adv_chain to remove CTE from chained PDUs.
The rem_cte_info_from_per_adv_chain had pdu_prev and pdu as arguments.
After return from the function the pdu_prev should point to last
PDU from previously used periodic advertising data and pdu should
point to last new periodic advertising data.
The rem_cte_info_from_per_adv_chain function removes CTEInfo from
all but last one PDU. Last PDU must have removed AuxPtr field also.
Remove of CTEInfo and AuxPtr from last PDU is done explicitly in
the cte_info_clear function.
Unfortunately rem_cte_info_from_per_adv_chain had wrong type of
parameters for pdu_prev and pdu. These parameters were pointers
instead od double pointers.
That caused cte_info_clear function to remove CTEInfo and AuxPtr
from first PDU in a chain, which is AUX_SYNC_IND.
Changed parameters pdu_prev and pdu in the rem_cte_info_from_per_adv_-
chain to be double pointers.
Added small corrections in comments.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Co-authored-by: Emil Gydesen <Thalley@users.noreply.github.com>
There was a change in parameters list of function ull_adv_sync_pdu_-
alloc. There was a call in commmon.c file in connectionless_cte_chains
unit tests with use of former parameters list. That caused a compilation
error.
The commit fixes the compilation issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
We shouldn't use swapping with an interrupt lock held
as it works incorrectly on SMP platforms.
Fix that by replacing irq_lock with spinlock for pthread
subsystem.
NOTE: we fix that in a simple way with single spinlock
for mutex / cond_var / barrier. That could be improved
later (i.e. split it for several spinlocks).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
In some cases the 'reschedule' code path is executed when the current
thread is the same as the next thread in the ready Q. If this happens,
the swap_return_value of the thread is ifalsely being reset to -EAGAIN.
This commit prevents the rescheduling code to run if the current thread
is the same as the thread in the ready Q.
Signed-off-by: Wolfgang Reißnegger <gnagflow@fb.com>
According to the rule MISRAC-2012 21.4.a the standard header
file <setjmp.h> shall not be used. Suppress it, because it raises
violation in a testcode, not in a runtime code.
Tag suppresses reporting of violation for the current file,
starting from the line where the suppression is located.
It is a deliberate deviation.
Found as a coding guideline violation (MISRA R21.4.a) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The driver code for the Maxim DS3231 has repeated code for bit
manipulation to transform time data between binary and binary coded
decimal. Use the new BCD header functions instead.
Signed-off-by: Jake Swensen <jake@swensen.io>
Some devices (such as RTCs) have data formats that expect BCD values
instead of binary. These routines allow for converting between binary
and BCD formats.
Signed-off-by: Jake Swensen <jake@swensen.io>
Low power modes entry on stm32wb depends on requests coming from both
cores, with no consideration of the fact that C2 is booted or not.
By default, set C2 power mode to shutdown at C1 start up.
If required, it will be updated by C2.
In case C2 is not started, this will allow C1 to enter any power mode
with no dependency on C2.
Fixes#38173
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This adds arch_float_enable() and arch_float_disable() to x86-64.
As x86-64 always has FP/SSE enabled, these operations are basically
no-ops. These are added just for the completeness of arch interface.
Fixes#38022
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some architectures already returns -ENOTSUP when these functions
are called. So add this return value to the API doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds public API documentation for the thread bit
K_SSE_REGS. It was previously a single line comment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Setting this bit will wake up CPU if it is in low power mode
and an interrupt is pending.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This adds new FPGA controller which allow to control FPGA chips.
FPGA controller has been created to enable bitstream loading
into the reprogrammable logic. It adds completely new API,
which enables to check status of the FPGA chip, power it on
or off and reset it.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The HiFive Unleashed and HiFive Unmatched boards do not enable the
SPI0 controller that the flash is connected to. This test will not
build on these platforms because SPI0 bus controller is missing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds new support for SiFive HiFive Unmatched which has
SiFive FU740 SoC, DDR and some peripherals.
This is first version so not support all features on the board.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds support for SiFive Freedom U740 SoC.
First version is minimum only using UART, SPI and L2-LIM area.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds new support for SiFive HiFive Unleashed which has
SiFive FU540 SoC, DDR and some peripherals.
This is first version so not support all features of the board.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds support for SiFive Freedom U540 SoC.
First version is minimum only using UART, SPI and DDR memory area.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch changes condition of 'depends on' of sifive UART driver
to support other SoCs of SiFive Freedom series.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch fixes printf format specifier "%u" -> "%zu" for printing
an argument of size_t on 64bit environment.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
add board support for Dragino NBSN95 NB-IoT sensor
node. Initial support only includes UART (with followup
patches on BC95 and other peripherals)
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Trivial change for C++, reorder Z_MEM_SLAB_INITIALIZER members
initialization in the same order they are defined in k_mem_slab
structure.
Fixes#38219
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Add a very simple application intended to show how to use the Audio
DMIC API and also to be an aid in developing drivers to implement
this API.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a shim that allows using the nrfx PDM driver via the Zephyr API.
Add also missing devicetree nodes representing the PDM peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-pdm" binding with a new property that allows
specifying the clock source to be used by the PDM peripheral (so that
it is possible to use HFXO for better accuracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The name pinmux is misleading, since no actual pinmuxing is done (just
pull-up setup).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The internal pinmux API was being used to setup GPIO pull-ups, however,
this can be done using the standard GPIO API.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After the Technical Steering Committee decided to approve the transition
from Slack to Discord, it is necessary to update all the documentation
to reflect this change.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The free run timer will be used to count before entering hibernate
mode. Move the related registers to the head file for accessing.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Zephyr now requires CMake 3.20 or newer.
Let's remove comment regarding ADDITIONAL_CLEAN_FILES only supported
with CMake 3.15 or newer.
Also remove the ADDITIONAL_MAKE_CLEAN_FILES which provided the same
functionality, but only for Makefiles when using CMake <3.15.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The `set_conf_file()` was deprecated in
6d4ba3490f
which is before Zephyr v1.14 LTS.
Let's remove the support now, before releasing a new LTS.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This feature got written twice for two different purposes (to inform
the SOF app of which CPUs are running, and to predicate the delivery
of IPIs to the cores ready to receive the interrupt). Use only one.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When working with the SOF kernel driver, it likes to shut down the DSP
on error. That means there is a very small window in which to catch
any log output, even with a whiteboxed kernel. So we should be
polling much faster (10 Hz) for changes when we detect a reset.
Also, don't repeatedly log the device reset detection, it spams the
console badly when we crank up the rate. Just log it once and then
stay silent until we see output.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These are getting build failures due to some kind of devicetree
console definition missing. These devices don't do networking, and
strictly don't even have a proper console device (logging is done via
a host mechanism). Probably fixable. Not worth the trouble. Filter.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On pre-2.5 cAVS, the initial IDC interrupt to start the other core is
handled by software in the firmware ROM. That means that it has to be
unmasked for the mechanism to work (with 2.5, the interrupt is handled
by hardware regardless of what the masking state in the interrupt
controller is).
Similarly, the Xtensa Region Protection Option entries have already
been set by ROM code when we arrive in enable_l1_cache(), so we can
skip that part on older machines. Also removed because trying to
rewrite those entries was causing inexplicable hangs on cAVS 1.5,
plausibly because the region had active cache lines.
(This patch is separate for easier review in a long evolving PR.
Technically it represents a bisection problem as the "New IDC Driver"
patch before this was a regression. Seems like a safe enough thing to
handle if you land on this.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix various bugs with the new IDC layer that show up in edge cases
where code relies on correct timing of IPIs (unsurprisingly there is a
lot of code that recovers anyway even if the IPI doesn't arrive
promptly). Leaving this as a separate patch because the prior code in
the PR has already been reviewed and it "mostly" worked:
The unmasking of the L2 interrupt bit (remember there are three layers
of masking of the IDC interrupt) was always operating on CPU0 at CPU
startup because the code had been copied blindly. Unmask the CPU
we're actually launching. It turns out cAVS 2.x re-masks this on CPU
launch automatically.
The global init code to unmask all these interrupts at startup had the
same bug, even though it turned out to be needless (the initialization
state has it unmasked until it turns it back off). Do it right
anyway. Similarly add code to clear out existing interrupt latch
state by ACKing all IDC interrupts at startup. Seems needless, but
behavior isn't documented so let's be safe.
Flag CPU0 as always "active" for the purposes of IPIs. Forgot to do
this earlier, oops.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The alignment on .bss was coming out wrong. The ". = ALIGN(4096);"
statement was being ignored, somewhat inexplicably. This resulted in
the bss symbols being assigned corret-seeming, non-overlapping
addresses. But it overlapped the page-sized padding at the end of
.data.
As it turns out, the rimage format (not the linker or Zephyr) requires
page-sized sections to copy, and the bootloader code does that copy by
writing to the CACHED mapping of the memory (.bss is, like .data,
uncached/coherent by default). So at runtime the CPU was running in a
context where the cache was populated with "booby trap" data at the
start of .bss. True .bss access would hit the memory uncached and see
the "correct" value, but at arbitrary times during execution lines
would be flushed out of L1 cache on top of it.
Oops. This was found by accident, actually, as routine changes to the
linker script to correctly support the case where KERNEL_COHERENCE=n
(i.e. put everything in the cached mapping and nothing in uncached)
suddenly hit rimage failures because of the overlap.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
New docs for cavs_v25 describe building a Linux kernel for a
Chromebook and need to talk about these kconfigs.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a SOC API to allow for application control over deep idle power
states. Note that the hardware idle entry happens out of the WAITI
instruction, so the application has to be responsibile for ensuring
the CPU to be halted actually reaches idle deterministically. Lots of
warnings in the docs to this effect.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is a hardware startup state where power gating can be "enabled"
even though the core is actually launchable via an IDC interrupt (in
fact that's the hardware default). In that state, the CPU will launch
correctly but then unexpectedly shut itself off then it enters the
idle thread.
Don't rely on initialization state, always set the power and clock
gating bits (to disable gating) immediately before CPU launch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a struct-based interrupt masking API to match the existing shim
and IDC register interfaces. The existing interrupt controller code
isn't using it yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A simple WAITI isn't sufficient in all cases. The cAVS 2.5 hardware
uses WAITI as the entry state for per-core power gating, which is very
difficult to debug. Provide a fallback that simply spins in the idle
loop waiting for interrupts to provide a stable system while this
feature stabilizes.
Also, the SOF code for those platforms references a known bug with the
Xtensa LX6 core IP (or at least some versions), and will prefix the
WAIT instruction with 128 NOP.N's followed by an ISYNC and EXTW. This
bug hasn't been seen under Zephyr yet, and details are sketchy. But
the code is simply enough to import and works correctly.
Place both workaround under new kconfig variables and select them both
(even though they're actually mutually exclusive -- if you select both
CPU_IDLE_SPIN overrides) for cavs_v25.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On CPU startup, When we reach the cache flush code in arch_switch(),
the outgoing thread is a dummy. The behavior of the existing code was
to leave the existing value in the SR unchanged (probably NULL at
startup). Then the context switch would walk from that address up to
the top of the outgoing stack, flushing everything in between. That's
wrong, because the outgoing stack is a real pointer (generally the
interrupt stack of the current CPU), and we're flushing everything in
memory underneath it.
This also reverts commit 29abc8adc0 ("xtensa: fix booting secondary
cores on the dummy thread"), which appears to have been an early
attempt to address this issue. It worked (modulo all the extra and
potentially incorrect flushing) on cavs v1.5/1.8 because of the way
the entry code worked there. But on 2.5 we now hit the first context
switch in a case where those extra lines are in address space already
marked unwritable by the CPU, so the flush explodes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On cAVS 2.5, there is an inherent race with the IDC interrupt. It's
used for routine IPIs during OS operation, but also for launching a
power-gated core. Recent changes moved the unmasking of the IDC
interrupt earlier, which made it possible for early OS scheduler
behavior (e.g. adding the main thread to the run queue) to
accidentally launch the other cores into LP-SRAM that had not been
initialized.
Instead of treating this with initialization ordering, keep and
maintain a list of active CPUs and check them at runtime to be sure we
never try to IPI a CPU that isn't running yet. We're going to need
this feature when we add live core offlining anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use the built-in IDC handling and not IPM (which is limited to two
CPUs). Declare two cpus for now, Zephyr tests are having problems
with more at the moment (that isn't a CI configuration, so we may have
work to do).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The original interface for the intra-DSP communication hardware on
these devices was buried inside a Zephyr IPM implementation.
Unfortunately IPM is a two-endpoint point-to-point communication
layer, it can't represent the idea of devices with more than 2 cores.
And our usage (to push a no-argument/no-response scheduler IPI) was
sort of an abuse of that metaphor anyway.
Add a new IDC interface at the SOC layer, borrowing the C struct
convention already used for the DSP shim registers.
Augment with extensive documentation, extracted via a ton of
experimentation on cAVS 2.5 hardware.
Note that this leaves the previous driver in place for the cavs_v15
and intel_s1000 devices. In principle they should use it too (the
hardware registers are identical), but this hasn't been validated yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Earlier platforms were relying on the system ROM to have done this
correctly, but with CAVS 2.5 we launch the CPU into our own code
directly. So we need to do those steps manually. And there's also a
new one on this hardware, which has software power control over the
cache SRAM.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Hardware defaults for the secondary CPUs have the S32C1I instruction
set to be atomic only with respect to the local L1 cache, which is
basically useless on a multiprocessor platform. The CPU0 boot path
sets this manually, so we need to duplicate that here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On MP cores that don't come through the core entry point
(e.g. TGL/v2.5) we reach C code with hardware defaults for the RPO/TLB
settings. Set these up correctly on entry.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This hardware works a little differently. The cores will start up
immediately on receipt of an IDC interrupt (they don't need the host
to be involved), but they don't have a ROM. They start executing at
the start of the LP-SRAM block always. Copy over a tiny trampoline
for them that jumps to the existing multiprocessor startup path.
Also set the PS WOE bit to enable register windows in the startup
path. This isn't the hardware default, and where the ROM would do
that for us before here we need to make sure it's on.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This reverts commit ee7773fb46.
Unfortunately this mechanism doesn't seem to actually work on the SDK
linker. The emitted sections, when passed a symbol name as the "start
address" just appear wherever the "." variable was pointing (in this
case, into the cached region). That breaks the kernel coherence
layer, obviously.
Revert for now, which will regress the XCC build fix pending a proper
root cause.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This aligns the SoC initialization with the one in SOF,
especially the manipulation of clock control and power control
registers. These registers are not entirely the same across
CAVS versions, so we need to deal with them according to
which version we are building for. This also consolidates
the macros for these registers to the one provided by SOF
(soc/shim.h) to avoid duplication. Another note is that
the usage of clock gating bit was not correct. In SOF,
clock gating of SoC cores should be allowed but the old code
in Zephyr prevented clock gating, which has the potential to
prevent the whole DSP from going into low power mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The wall clock timer is not (per documentation) part of the
"timestamping" register set on the DSP. And its counter and
comparator registers work fine always. But if the DSP isn't set as
the "owner" of the timestamp hardware, wall clock interrupts never
arrive.
Also grab the PLL ownership too, because SOF already does anyway.
While we don't have a dynamic clock driver yet, we will surely want
one soon and will needt this.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These windows control host visibility of the trace output buffer. The
buffer itself is writable memory always, but until we get to the
register init the host can't see them. Since they contain
printk/logging output, they REALLY need to be initialized earlier than
anything else.
Also remove a rogue memset of the trace buffer. That buffer is
already being initialized in a lazy-evaluated way by the trace output
code, and blowing it away here has the effect of forgetting anything
earlier code was trying to log!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The default development environment for this target is in fact a
consumer Chromebook available to anyone. So it deserves public
documentation.
Note that this spends considerably more time explaining the details of
how to configure a chromebook as a Zephyr development platform than it
does the process for building and running Zephyr (which is really very
conventional). Chromebooks, which allow user-signed audio firmware,
are a great boon to SOF development. But they were never intended as
developer devices themselves.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a loader script variant for Tiger Lake (cAVS 2.5) devices, which
have very slightly different loading behavior from older 1.5 DSPs.
This is added as a "-v25.py" script, and the original has been renamed
to cavs-fw-v15.py. Note that there is no good reason except schedule
pressure that these are not the same script, I just wasn't able to
make a single script work compatibly in the time available.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support for the extended manifest blocks that recent versions of
rimage are including as a prefix on the firmware blob.
Also include some PCI runtime PM tricks to reliably enable the DSP
device on kernels that have turned off the DSP device automatically
(e.g. systems that have PM enabled by default but where the SOF driver
is not loaded -- chromebooks work this way, potentially other
distros).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr Bluetooth Mesh move adv send cb to buf destructor
callback, There are two net_buf_pool define, one to adv.c
and ore to friend.c, we are missing destructor in friend.c.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Two checks reported wrong value if the value was invalid.
CIS parameter check would always fail on correct values
due to missing negation of valid_chan_qos.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix two typos in documentation, one in a sample's comment, and one in a
sample's console message. Found while learning Zephyr and exploring the
sources.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Adds flash partitions and chosen nodes to the mimxrt1024_evk device tree
to support mcuboot on the internal QSPI flash.
Also adds missing zephyr,itcm chosen node.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
add correct binding, fix size to 32MBit, add erase and write
block size to support mcuboot and rename to reflect the actual
flash model.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
the config symbol was missing for some reason even though
the soc does have a flexspi peripheral like most other socs
in the family.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
For each compiler, also set a CMAKE_GCOV var referencing the appropriate
gcov tool.
Tested with gcc and host-gcc on the ChromeOS codebase.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Problem:
In some cases, as described in: https://github.com/zephyrproject-rtos/zephyr/issues/36948
shell backend sends characters to output before serial device
is ready for it. It results in observing additional characters
inserted on the shell input after device boot.
Solution:
Added waiting on DTR signal before sending anything to the output.
Fixes: #36948
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
When Public Key field is set to RFU value then we should send
Provisioning Fail with Invalid Format error.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Counter was not reset between various tests which may hide the fact
that number of preemptions is less than expected.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Stress test that was validating thread safeness was configured to use
higher sys tick rate and targeting qemu_x86 platform. However, it was
also build for other platforms and was failing. Fixing it by extracting
stress tests to separate configuration that is run only on qemu_x86.
Modified the test to fail when number of preemptions is less than
expected only on qemu_x86.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix MPU fault due to incorrect EV_COUNT, `conn_change`
signal was not accounted for in the array used by k_poll.
Relates to commit 7854088116 ("Bluetooth: ISO: Fixes
missing handling of broadcast ISO TX").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the locally MSI/MSI-X capabilities ID define and use the
newly introduced one from the PCI Code and ID Assignment
Specification Revision 1.11 document header.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add defines for all the PCI and PCIe capabilities from the PCI Code
and ID Assignment Specification Revision 1.11 document.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Extend the PCIe API to find Extended Capabilities in the PCI Express
Extended Capabilities located in Configuration Space at offsets 256
or greater.
Note: the Root Complex Register Block is not supported
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Improve the disconnect handling in the sample, and
avoid creating a new cig for each connection.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of disconnecting ISO channels on ACL,
we put them in a non-connected state, and wait for
the ISO disconnect events.
This ensure that the controller has free'd the
ISO channels when the iso disconnect callbacks
are received. It will thus be possible to e.g.
terminate the CIG on the ISO disconnect callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The disconnect handling of ACL connects in the sample was done
incorrect, and caused a call to bt_conn_unref with a NULL
pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There might be a sign extension when a long is promoted to
int_value_type and the former type is smaller than the later.
This produces the wrong output if the specified format is unsigned.
Let's avoid this problem by handling signed and unsigned cases
explicitly. When the type already matches int_value_type then the
compiler is smart enough to recognize the redundancy and removes
unneeded duplications automatically, meaning that the code will stay
small when code size matters.
A similar issue also existed in the restricted %llu case.
The fix is the same as above.
Those fixes exposed wrong results in the printk.c test with %llx
so fix that as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Function parameters can be checked without MQTT instance lock being
held. Additionally if NULL parameter would be passed (which this check
tries to handle), then function would return without releasing lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Sending of > 2k buffers leads to split socket writes.
Current implementation is not checking for full buffer size.
ztls_sendmsg_ctx proceeds to next iov on sucessful write.
Solution: Add loop into ztls_sendmsg_ctx to process whole buffer
before proceeding to next iov.
Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
Apply a similar fix for cavs_v20 as was done for other cavs platforms in
commit ee7773fb46 ("soc: intel_adsp: fix linker script for XCC").
Without this fix, cavs_v20 build with fail with 0.13.0 Zephyr SDK.
Fixes: 74cc8bee7c ("xtensa: cavs_v20: use uncached addresses to support SMP")
BugLink: https://github.com/thesofproject/sof/issues/4703
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
enable spi driver to support dspi edma
add support for shared dma mux spi port
for shared spi port we need judge the irq source
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
For the Xtensa platforms (e.g. qemu_xtensa), the first `malloc` call
may fail if the newlib heap base address is such that the first `sbrk`
call returns a 4096-byte aligned address.
Here we add a workaround for Xtensa that allocates and immediately
frees a 16-byte memory block during initialisation so that all
subsequent `malloc` calls succeed.
This commit needs to be reverted once the issue #38258 is fixed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The #36758 fixes coap_packet_get_payload function by normalizing
offset value in the library. That change create a regression on
UpdateHub. However, the UpdateHub can now use coap_packet_get_payload
function instead manually compute payload start and payload size.
This refactors the current code in favor of coap_packet_get_payload
and fixes the regression.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The user tracing backend allows one to implement weak symbols to perform
user specific tracing, e.g gpio toggling or spi transactions. This adds
a qemu sample that just does a simple printk for each of the traced
functions, but could be changed to do whatever function the user
desires.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create a new tracing option TRACING_USER that allows
the user to define certain user_sys_trace_... functions
to perform whatever work desired for tracing when
tasks are swiched in/out, during isr enter/exit, and when
cpu is idle.
This infrastructure can be useful for plugging into
locally defined tracing tools or any user-specific
debugging environment.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
IRQ_CONNECT macro last argument is architecture-specific flag,
but now there is instance id at this place.
This PR set architecture-specific flag to 0.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Atmel sam0 adc peripheral have multiple interrupt vectors for same5x
devices. This configure interrupt vector by name to ensure that proper
interrupt handle will be executed.
Fixes#37779
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a sent callback to bt_iso_chan_ops so that the application
can be notified when an SDU has been sent. This can help the
application decide whether to queue up multiple, or only
have a single ISO PDU enqueue for reduced latency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Kconfig refactor that replaces some single-symbol 'if's with
'depends on' added a second entry. That entry allows flash driver
be selected for SoC's without support. This fixes the 'depends on'
entry to allows only SAME/V SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit removes the `timeout_q` from the `struct z_kernel` since it
is no longer used.
Note that the new kernel timeout implementation introduced in the
commit 987c0e5fc1 uses `timeout_list`
global variable in place of it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
__cxa_atexit implementation provided by MWDT startup code calls
malloc which isn't supported right now. As we don't support
calling static destructors in Zephyr let's provide our own
__cxa_atexit stub and get rid of MWDT startup libs
entirely.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Default weak _exit implementation from ARC MWDT libs
calls _exit_halt from startup libs. As we are going to
get rid of startup libs usage let's implement _exit
stub.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This script allows us to programmatically query bug-bashers within
a user-supplied time-window.
For example, we held a "Bug Bash Week" August 1-7, 2021 (it was
announced a week early though). The output of the script prints
the "top ten" bug bashers in tab-separated columns in descending
order. The first column is the number of bugs squashed and the
second column is the github user id.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When we build tests/kernel/common/kernel.common.misra on
bl654_usb we get the following error:
subsys/usb/usb_descriptor.c:313:2: error: ISO C90 forbids array
'hwid' whose size cannot be evaluated [-Werror=vla]
Fix by removing use of usblen variable in array.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The code was wrongly calling DMA_Abort on a channel
that not initialized. This fixes Issue#38078
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Compatible "soc-nv-flash" was removed as part as #38077,
while it should have been kept, similarly to what was done
on other SoCs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On native_posix_64 we get the following compile error in CI:
error: format %u expects argument of type unsigned int
Fix by using %zu instead of %u as type is of size_t.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PR #37938 aligns many linker symbols name like rom/rodata_regions ...,
but ae350 soc linker script doesn't update for that. Migrate all linker
symbols name to PR #37938 changes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The HCI spec defines the BIS index range as starting from
index 0x01. We had previously implemented it such that it
starts from 0x00, and then simply adding 1 to the index
when sending over HCI. However, this may cause issue with
other HCI, or other SIG defined specification, commands
and events, and thus it is probably simpler if we just
use the HCI defined range.
This commit disallows BIT(0) (representing the BIS
index 0x00) to be set, and removes the addition
of 1 when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Position over LTE (PoLTE) can be used to locate a device as
an alternative to GNSS.
Increase RX thread stack size for PoLTE processing.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow application control for starting modem driver.
This allows network attach to be randomized.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When run by a makefile twister might fail to decode the text results of
commands, based upon the environment settings of the system. With this
change escape characters are removed before the string is passed to the
json decoder.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove littlefs dependency as FS backend works with any file system as
long as it is (manually or automatically) mounted.
Fixes#36851
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
Fix null pointer deferencing in Periodic Synchronization
when ULL execution context could not assign an auxiliary
context when in LLL scheduling to receive chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix null pointer dereferencing in Extended Scanning when
there are more peer devices than the allocated auxiliary
contexts.
When LLL scheduling does not get an auxiliary context
assigned in the ULL execution context, then further chain
reception is aborted, access to `lll->lll_aux` which is
NULL causes null pointer dereferencing in
`ull_scan_aux_release`.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Initiating a connection, release auxiliary
context memory referenced by the lll_aux pointer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Periodic Advertising Synchronization's drift
compensation to save radio ready and address capture on
AUX_SYNC_IND reception, restore and apply at the end of
reception of all AUX_CHAIN_IND PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of checking `if (iso == NULL)` it simply checked
`if (iso)` which is the opposite of what it should have done.
This completely blocks iso from connecting channels.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
So fare flash simulator had been forced to use the statistic
subsystem.
This patch introduces CONFIG_FLASH_SIMULATOR_STATS which allow to select
whether the statistic is involved in flash_simulator operations.
This patch allows to reduce flash footprint when the statistic is
not required.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For getting the address of the RAM region in the application we need to
extend the api for the flash_simulator.
This path introduce flash_simulator_get_memory() call which allow to
do so.
Signed-off-by: Sigvart Hovland <sigvart.m@gmail.com>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
cdc_acm_irq_tx_ready was not checking if its interrupt was enabled.
This causes spurious tx irq handler calls.
Signed-off-by: Eric Johnson <eric@liveathos.com>
Fixes the issue where uart_sam0_irq_tx_ready would return true if
the INTFLAG was set even though the INTSET bit for the given
interrupt was not enabled yet through uart_sam0_irq_tx_enable.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Create a board overlay file in the application directory to add
pwm-led0 entry over default device tree. Also, include instruction
in the README file that connection of external LED at pin PA8 is
required for the demo to work.
Signed-off-by: Waqas Mazhar <waqas.mazhar@planetinnovation.com.au>
Node names are subject to the rules in table 2.1 of the devicetree
specification v0.3, while properties are subject to rules in table
2.2. These rules mean that some property names are invalid node names.
However, the same regular expression is being used to validate the
names of nodes and properties in dtlib. This leads to invalid node
names being allowed to pass. Fix this issue by moving the node name
handling code to the Node constructor and checking against the
characters in table 2.1.
The test cases claim that the existing behavior matches dtc. I can't
reproduce that. I get errors when I use invalid characters (like "?")
in a node name. For example:
foo.dts:3.8-11: ERROR (node_name_chars): /node?: Bad character '?' in
node name
Try to make the dtlib error message reminiscent of that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is unused since the very beginning of the module's introduction.
It looks like it was abandoned in favor of the approach where each
token can have only one capturing group.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For low power operation, set the IP connection reconfig
flag when receiving a startup report.
This will ensure the GPRS connection is reconfigured
before any socket operations take place.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
We get build issues due to the removal of the Kconfig symbol
CONFIG_UART_SHELL_ON_DEV_NAME on platforms that didn't have a uart
set as we'd get a default value for those platforms. Update the
Kconfig logic to only enable SHELL_BACKEND_SERIAL if we have
zephyr,shell-uart specified in the devicetree to address the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow the driver to run if a SIM card is not present.
This allows public HL7800 APIs like firmware updates
to be used even if no network is available.
Remove duplicate query ICCID command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This changes "__nocache K_HEAP_DEFINE()" to use the new
K_HEAP_DEFINE_NOCACHE() macro. This fixes a build error
as K_HEAP_DEFINE() is specifying its own linker section
so that it is no longer possible to specify another
linker section.
Fixes#38108
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows a kheap to be defined in the uncached memory.
For example, this can be used for DMA transfer buffers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
System heap buffer was moved from dram0_0_seg to dram0_1_seg.
This commit fixes system heap buffer placement.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Timeout cancel should only be done for connections established in
peripheral role.
Enhanced connection complete event could still be delivered without
extended advertising support (i.e no advertising set terminated event)
so this handling should be moved to the common conn complete function.
Fixes#37467
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
SMP support on cAVS is implemented by using uncached addresses for all
writable data sections except for stack, i.e. for .data, .bss and
some other specialised ones. So far that has been implemented for
cAVS 1.5/1.8. This patch does the same for cAVS 2.0.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
PR #35774 introduced a uuid field in the bt_mesh_cfg_mod_pub structure.
The shell does not initialize this pointer before passing it to the
access layer. Add a line to initialize this pointer.
Fixes#38016.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL here, so the check is redundant. Coverity is
complaining because param is accessed before the NULL check.
Fixes#37949.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL, so this check is redundant. Coverity complains
about this, as the param variable is accessed before the check, which
would be wrong if param could be NULL.
Fixes#37948.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When Extended Scan Response data of length zero is set, the
Scan Response do not have the Common Extended Payload Format
and hence no ADI field. Fix uninitialized pointer to Scan
Response Data's ADI to avoid copy of ADI from primary
channel PDU.
Fixes#38015.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For some reason, XCC fails to build complaining segfault
during CGPREP phase. Adding an assignment to a volatile
return value seems to fix this. This provides an easily
revertable commit to workaround the issue.
Fixes#37734
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When ack data for extended address is set with the
nrf_802154_ack_data_set function, the extended address
must be reversed to the IEEE 802.15.4 address transmit
order in order to be properly matched.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Error handling was missing in numerous places, mostly on GPIO related
callbacks. Some error codes were not correct (-EINVAL vs -ENODEV) and in
some cases error was not propagated correctly.
Fixes#38117
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Error handling was missing in numerous places, mostly for GPIO related
callbacks. An assertion has been used in the context of thread callback.
Fixes#38132
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The TF-M build is passed a path to the mbedtls project
directory, however, NCS has its own mbedtls variant. When
building with TF-M we use a generator expression to allow
setting the path to mbedtls from nrf_security.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Apply the same fix in bd8afe9365
(" drivers: sensor: clean up zephyr_library calls") to remove
redundant code in the sensor driver build system files. Additional
instances of the antipattern have crept in.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The rpmsg_mi_configure_shm() function is not returning anything and it
is not marked as static. Fix this changing the return type to 'static
void'.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When possible use 'size_t' for sizes and 'uintptr_t' for generic
addresses instead of relying on uint*_t types.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The result of temperature and relative humidity ticks ranges from 0 to
65535 which is the range of a uint16_t variable. Intermediate tmp
variable type has also been adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When call bt_gatt_indicate with param->attr set to null.
and attr->uuid set to given uuid, the internal notify will
search uuid, but not assigned to param->attr, which cauce
null point reference when:
notify --> gatt_indicate --> bt_gatt_check_perm
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When call `bt_gatt_notify_cb` with param->attr set to null.
and attr->uuid set to given uuid, the internal notify will
search uuid, but not assigned to param->attr, which cauce
null point reference when:
notify --> gatt_notify --> bt_gatt_check_perm
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The max-erase-time property was introduced for the STM32 flash driver,
but it was inserted as an optional property in the generic
soc-nv-flash binding which is used by other SoCs.
Make it a required property in a new st,stm32-nv-flash binding
instead, since it is at present a vendor specific property.
Update the DTS files accordingly. Keep the existing "soc-nv-flash"
value in the compatible list in each case, so that DT_HAS_COMPAT(...
soc_nv_flash) tests on these nodes will still succeed, but put it
after a newly added "st,stm32-nv-flash" compatible, so that the
SoC-specific binding will be used as it is discovered first by the DT
tooling.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add myself and Teng-Shih-Wei as owners for andes_v5 soc series, dts,
adp_xc7k_ae350 board, and device drivers from Andes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Adding adp_xc7k_ae350 board support based on andes_ae350 soc. It's base
support and only contains uart/gpio drivers.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This initial support of L2C driver only contains cache enable and HW
capability checking. Cache management operation isn't supported yet
in this driver.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Andes V5 PMA can let SW programmably configure memory attribute of
physical memory region. This commit enable CONFIG_NOCACHE_MEMORY of
Andes V5 CPUs based on the PMA. Use PMA region 0 to set whole nocache
section as uncached memory.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Support custom RISC-V CSR context switch for Andes V5 CPUs.
Both AndeStar V5 DSP and PowerBrake features have it's own CSR to be
saved for thread and ISR context, so adding these CSRs into the RISC-V
SOC context management framework (CONFIG_RISCV_SOC_CONTEXT_SAVE).
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add andes_v5 SoC series and andes_ae350 SoC. It includes
soc initialization code, linker script, and custom CSR encoding.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Latel we have had several failures and regressions due to the setting of
CONFIG_SRAM_BASE_ADDRESS to really high values (over the 4GB boundary).
To try to catch these problems as early as possible we add a build-only
test based on the hello_world_user sample that tries to compile the test
using a combination of CONFIG_SRAM_BASE_ADDRESS and
CONFIG_KERNEL_VM_BASE set to high values in memory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add logging for NRFX_USBD_EP_ABORTED event inside
control transfer events handling, otherwise "Unexpected event"
error message in this regard confuses the users.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable thread awareness by default on philosophers sample. It shows
gdb debugging output using the feature as reference.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit disables running the CMSIS-DSP tests on the mps3_an547
board because the QEMU, which is default emulation platform for it,
does not currently support the emulation of the MVE instructions.
Refer to the issue #37694 for more details.
Revert this commit once QEMU 6.2 is released and integrated into the
Zephyr SDK.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the quaternionmath F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation Q7 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CF64 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CF32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CQ31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CQ15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the svm F32 test patterns and implementations for
the CMSIS-DSP 1.9.0.
Note that the one-class SVM test has switched from using RBF to linear.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the support F32 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Note that the spline interpolation feature has been moved from the
'Support' module to the new 'Interpolation' module.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics Q7 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Unary F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary F64 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Binary F64 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Binary F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Binary Q7 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Binary F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Binary Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Binary Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering DECIM F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering DECIM Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering DECIM Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit makes the tests for the partial convolution functions
(`arm_conv_partial*`) optional because these functions have computation
precision-related issues (tested with CMSIS-DSP 1.9.0, which is part of
the CMSIS 5.8.0 release).
The partial convolution functions (especially the fast variants) can
return very low-precision results (as low as 14dB SNR) under certain
configurations.
This issue will be further investigated and reported to the upstream
CMSIS developers.
Once this issue is fixed upstream, revert this commit in order to make
the partial convolution tests run all the time.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering MISC F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC Q7 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering FIR F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering BIQUAD F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the basicmath F32 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the basicmath Q31 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the basicmath Q15 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the common test and validation routines for the half-
precision floating point data.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the CMSIS-DSP configurations for the CMSIS-DSP
1.9.0, which is part of the CMSIS 5.8.0 release.
Note that the Helium/MVE configurations are removed because CMSIS-DSP
now automatically selects them if available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the half-precision (16-bit) floating-point
configurations to the ARM AArch32 architectures.
Enabling CONFIG_FP16 has the effect of specifying `-mfp16-format`
option (in case of GCC) which allows using the half-precision floating
point types such as `__fp16` and `_Float16`.
Note that this configuration can be used regardless of whether a
hardware FPU is available or supports half-precision operations.
When an FP16-capable FPU is not available, the compiler will
automatically provide the software emulations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Note that the it8xxx2 does not support a status register so that
functionality is omitted.
This change also adds driver tests that build both the npcx and it8xxx2
drivers.
Signed-off-by: Yuval Peress <peress@chromium.org>
There was a typo that snuck into the bbram driver for npcx.
Fix the driver and update the Kconfig to automatically include the
driver if the compatible string exists in the dts. This ensures that
the driver is built when building the npcx evbs.
Signed-off-by: Yuval Peress <peress@chromium.org>
Add nrf51 MDK defines needed to correctly select the nrf51 erratas
needed on the specific SoCs. The nrf51_erratas.h header file only uses
these defines to check which erratas should be applied.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Change IPM_STM32_HSEM Kconfig definition so that it picks the correct
default automatically depending on which cpu node is enabled in the
device tree, rather than relying on board specific Kconfig overrides.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Prefix ringbuffers with cdc_acm because it is not possible
to use static specifier with RING_BUF_*_DECLARE_* macros
to avoid conflicts.
Fixes: #36608
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Issue #37006 highlighted that some tests are prone to not passing on
QEMU for 32-bit RISC-V. This commit enables running tests in Renode on
emulated 32-bit RISC-V m2gl025_miv platform as a double-check.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
PR #36996 disabled running mem_protect/stack_random test on qemu_riscv32
platform because of this test consistently failing on said platform.
This test starts new threads in equal time intervals, and because of
that we get repeating values after performing the modulus operation when
calculating the stack pointer address.
This can be solved by changing the value of the _RAND32_INC constant
that is used to increase the value returned by the timer-based PRNG.
This commit decreases the value of the mentioned constant from
1000000013U to 1000000003U.
Fixes#37006.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
After pinmux being converted to build a separate static library
console not show anymore and there is a hard fault. The hard
fault happen because pinmux drivers are not ready yet and board
emits an assert. This change board pinmux initialization to
PRE_KERNEL_2 and let system take care error handling.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit adds an additional test case for several kernel test suites
to ensure that the linker script generator is working correctly for a
subset of the Zephyr test suites.
The ensures that the basic functionality of the linker script generator
is working while still keep the performance impact on CI at a minimal
level.
Using the kernel tests is a trade-off between testing coverage of the
linker script generator and the time it takes to complete CI.
The kernel tests is considered to have the broadest coverage of various
features important for the generated linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The stub file threading_weak.c has been added containing weak stub
implementation of threading related kernel functions.
The file is needed for armlink.
When linking with armlink the linker will resolve undefined symbols for
all undefined functions even if those functions the reference the
undefined symbol is never actually called.
This file provides weak stub implementations that are compiled when
CONFIG_MULTITHREADING=n to ensure proper linking.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Support for ARM Compiler C library.
This commit add support for the ARM Compiler C libary in:
- Kconfig
- libc/armstdc
A new Kconfig symbol is added to allow a toolchain to specify if they
support linking with the minimal C library.
Also the CMake variable `TOOLCHAIN_HAS_NEWLIB` is exported to Kconfig
so that CONFIG_NEWLIB_LIBS can only be enabled if the toolchain has
newlib.
The armclang toolchain selects the CMake scatter file generator and
disables support for the LD linker template which is not supported by
armlink.
For the ARM Compiler C library, a corresponding lib/libc/armstc/ folder
with a minimal implementation to work with the ARM Compiler C library
is added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces armlink steering file.
A steering file in armlink allows Zephyr to keep using existing linker
symbols defined in ld scripts and used throughout the code tree.
The steering file is generated at build time in order to resolve Zephyr
linker symbols to their corresponding armlink symbols.
As example, Zephyr defines __ramfunc_start which corresponds to the
armlink auto defined Image$$ramfunc$$Base symbol.
Or __init_PRE_KERNEL_1_start which corresponds to Image$$init_0$$Base.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The default armlink signature uses `--list=<TARGET_BASE>.map`, but in
Zephyr we uses a different name for the map file, therefore we need to
specify a custom link executable signature.
This is done in the linker specific flags file:
cmake/linker/armlink/linker_flags.cmake
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When using ARMClang linker and scatter files (armlink) then all
libraries are linked as object libraries using `$<TARGET_OBJECTS:lib>`.
CMake version 3.20 only has limited support for such linking:
> Referencing $<TARGET_OBJECTS> in target_link_libraries calls worked
> in versions of CMake prior to 3.21 for some cases, but was not fully
> supported.
One of those cases that do not work is Unix Makefiles generators.
As only Ninja is currently verified to work, this commit will check the
CMake version in use and the generator, and if CMake version <=3.21 is
used with non-Ninja generator then an error is raised informing user
to either use Ninja generator or update CMake.
As the Ninja generator has been confirmed to work as expected, then that
generator is accepted with CMake 3.20 and older.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is the initial support for the armclang compiler together with the
armlink linker.
Introduced in this commit:
- armclang compiler support
- armlink linker support
- armlink scatter file generator for scatter loading
- dual pass linker script generation
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Initial bintools support for elfconvert
- hex, srec, bin conversion
- strip
- gap fill
Initial bintools support for readelf
Initial bintools support for disaasembly
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The armclang.h includes the toolchain/llvm.h header.
Also it redifines the __GENERIC_SECTION and Z_GENERIC_SECTION so that
they includes the `used` attribute which is needed by armlink.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
A "Linker script" choice group has been added to the linker options
menu.
The existing HAVE_CUSTOM_LINKER_SCRIPT config has been relocated inside
the linker script menu.
Two new entries has been created:
- LD template, for using the old ld template files together with the C
pre-processor to create the final linker script.
- CMake linker generator, used for ARMClang / armlink toolchain.
The CMake linker generator is also supported for LD linker scripts
for the ARM architecture.
In CMake, the file cmake/linker/ld/target.cmake has been updated to
support the CMake LD linker generator.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adding intial version of ld_script.cmake.
This script can generate ld linker script from the Zephyr CMake linker
functions.
This script is called by the build system and all linker settings, such
as memory regions, groups, output sections, linker symbols defined with
Zephyr CMake linker functions are passed to this script in order to
generate an ld linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adding intial version of linker_script_common.cmake.
This script parses memory regions, groups, sections, settings, and
symbols defined in the Zephyr CMake build system.
The linker script creates objects for each type above and groups
sections, symbols, and groups together based on their configuration.
This creates a hierarchy which the `<linker>_script.cmake`
implementations can then use during linker script generation.
linker_script_common.cmake also provides stubs for <type>_to_string()
functions which are used when generating the output script.
Each specific `<linker>_script.cmake` must implement those to_string()
functions to create the final linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit add devicetree memory regions added to arm/linker.cmake.
The following memory regions are now added to the generated linker
script and scatter file if they exists in the devicetree.
- chosen: zephyr,itcm
- chosen: zephyr,dtcm
- nodelabel: ti_ccfg_partition
- nodelabel: sram1
- nodelabel: sram2
- nodelabel: sram3
- nodelabel: sram4
- nodelabel: sdram1
- nodelabel: sdram2
- nodelabel: backup_sram
Also support for the itcm and dtcm section and their placement in
corresponding memory regions has been added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is the initial version of a Zephyr CMake linker file for the arm
architecture.
This file defines memory regions, groups, linker sections and symbols
for the arm architecture.
It also sources the common common-ram.cmake, common-rom.cmake,
debug-sections,cmake, and thread-local-storage.cmake.
It configure sections for SoC families using zephyr_linker_sources()
functions:
- nxp_imx
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit specifies the intList section in the IDT_LIST region in the
arch/common CMakeLists.txt file.
It uses zephyr_linker_section to setup the intList section for first
pass linker file and configures the section to hold irq_info and
intList input section.
For second pass linker file, the irq_info and intList input sections are
placed in the /DISCARD/ section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Converted existing ld script templates into CMake files.
This commit takes the common-ram.ld, common-rom.ld, debug-sections.ld,
and thread-local-storage.ld and creates corresponding CMake files for
the linker script generator.
The CMake files uses the new Zephyr CMake functions:
- zephyr_linker_section()
- zephyr_linker_section_configure()
- zephyr_linker_section_obj_level()
to generate the same linker result as the existing C preprocessor based
scheme.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces zephyr_linker_dts CMake functions for creation of
linker scripts based on devicetree nodes.
The linker devicetree functions supports the following features:
- Configuration of memory sections based on devicetree nodes
Overview of functions introduced with this commit:
- zephyr_linker_dts_memory
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces zephyr_linker CMake functions for creation of
linker scripts.
The linker functions supports the following features:
- Configuration of memory sections
- Configuration of memory groups
- Creation of output sections
- Configuration of input section the should go into output section and
how those should be treated, such as sorting, keep, priority.
- Defining linker symbols
- Specifying Kernel VMA to support virtual linking on x86
Overview of functions and macros introduce with this commit:
- pow2round
- zephyr_linker
- zephyr_linker_memory
- zephyr_linker_memory_ifdef
- zephyr_linker_group
- zephyr_linker_section
- zephyr_linker_section_ifdef
- zephyr_iterable_section
- zephyr_linker_section_obj_level
- zephyr_linker_section_configure
- zephyr_linker_symbol
- zephyr_linker_property_append
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The current gen_handles.py script uses linker defined symbols.
As preparation for support of more linkers the gen_tables.py now takes
the device start symbol as argument.
For example, armlink and ld uses different symbols.
With ld those can be named explicitly, but for armlink the linker
decides the names.
For ld, Zephyr defines: __device_start
For armlink, the symbol is defined as: Image$$<section name>$$Base
Therefore knowledge of the linker symbol to be used must be passed to
gen_handles.py so that the correct symbol can be used for locating
devices.
To support this change, the creation of the asm, compiler, compiler-cpp,
linker targets has been moved from target_toolchain_flags.cmake to
target_toolchain.cmake.
All linkers has been updated to support the use of the
device_start_symbol on the linker target.
List of linkers updated:
- ld
- lld
- arcmwdt
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Advertising might stop when:
- it was stopped by application
- device connected to a peer
- extended advertising reached stop condition
defined in BT_LE_EXT_ADV_START_PARAM - this is handled in ll
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Call bt_le_adv_stop() if adv == bt_dev.adv (Meaning it is the legacy
advertiser and was started with bt_le_adv_start()), otherwise use
bt_le_ext_adv_stop(), because it was started with bt_le_ext_adv_start().
Failing to stop advertising shouldn't result in assert.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Some test cases require the IUT to respond with a certain error. To get
the stack to return this error to PTS the application needs to be
configured specifically for this test case.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This changes pci_msi_enable() to take IRQ number as a function
parameter. The old behavior relies on putting the IRQ number
into the interrupt line register in the PCI config space
during IRQ allocation, and reading it back when enabling IRQ.
However, the interrupt line register is only required to be
read-/writable when legacy interrupt is supported on the device.
Otherwise it has undefined behavior. On ACRN, they don't even
care about this register and always wires it to 0x00.
So this commit changes the behavior in pci_msi_enable() to not
require reading back the interrupt line register and instead
takes the IRQ number via function parameter.
Fixes#36765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Temporary disable tests/lib/ringbuffer failing tests on
qemu_arc_hs6x until we fix the rootcause so we can enable
qemu_arc_hs6x in upstream verification.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Temporary disable logging-related failing tests on qemu_arc_hs6x
until we fix the rootcause so we can enable qemu_arc_hs6x in
upstream verification.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add support for signing i.MX SOF with Zephyr images with rimage.
Note that, for i.MX, we don't need a bootloader nor the .elf.mod files
since there is no need to change the VMA/LMA of each uncached section
to the equivalent address in the cached area of memory.
For the above reasons, I've updated the arguments given to "west sign"
command.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
For IMX, for timer interrupt, the interrupt handler
was not the correct one executed and that’s because
the handlers were not at the expected address.
For IMX the size constraint of the interrupt vector
table entry is 0x1C bytes of code, less than usual.
I've added a small indirection to bypass this size
constraint and moved the default handlers to the end
of vector table, renaming them to
_Level\LVL\()VectorHelper.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Xtensa GCC needs a different toolchain per SOC,
so add support for i.MX8.
If SOC_SERIES is imx8, that's for i.MX8QM and
i.MX8QXP.
If SOC_SERIES is imx8m, that's for i.MX8MP.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add a common part for all i.MX boards.
Add support for i.MX8, which represents i.MX8QM.
This has a 1 Xtensa HiFi4 core, with 64 KB TCM,
448 KB OCRAM, 8MB SDRAM and 1 ESAI, 1 SAI as
audio interfaces.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add dtsi file for i.MX8QM and i.MX8QXP boards.
These two have the same board-level definitions,
so we call it, generically, imx8.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
ld linker will only resolve undefined symbols inside functions that is
actually being called.
However, not all linkers behaves this way. Certain linkers, for example
armlink, resolves all undefined symbols even if during a later stage at
the linking the function will be pruned.
Therefore `ifdef CONFIG_GEN_ISR_TABLES` has been placed to safeguard
functions that will call undefined symbols when CONFIG_GEN_ISR_TABLES=y.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
z_arm_do_syscall is only defined and used when CONFIG_USERSPACE=y.
Defining the symbol z_arm_do_syscall in assembly without a corresponding
implementation is fine for GNU ld as long as the function is not
actively called, but armlink fails to link in such cases.
Safegaurd GTEXT(z_arm_do_syscall) so the symbol is only referenced when
actively used, that is when CONFIG_USERSPACE=y.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To support arm-ds / armlink it is required that the weak main is located
in an object externally to the object using the weak symbol.
If the weak symbol is inside the object referring to it, then the weak
symbol will be used and this will result in
```
Error: L6200E: Symbol __ARM_use_no_argv multiply defined
(by init.o and main.o).
```
as both the weak and strong symbols are used.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for __itcm_load_start and
__dtcm_data_load_start to other symbols and in such a way they follow
consistent pattern which allows for linker script and scatter file
generation.
The symbols are named according to the section name they describe.
Section names are itcm and dtcm.
The following symbols are aligned in this commit:
- __itcm_rom_start -> __itcm_load_start
- __dtcm_data_rom_start -> __dtcm_data_load_start
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_text_start and _image_text_end sometimes includes
linker/kobject-text.ld. This mean there must be both the regular
__text_start and __text_end symbols for the pure text section, as well
as <group>_start and <group>_end symbols.
The symbols describing the text region which covers more than just the
text section itself will thus be changed to:
_image_text_start -> __text_region_start
_image_text_end -> __text_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _ramfunc_ram/rom to other symbols and
in such a way they follow consistent pattern which allows for linker
script and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `ramfunc`
The following symbols are aligned in this commit:
- _ramfunc_ram_start -> __ramfunc_start
- _ramfunc_ram_end -> __ramfunc_end
- _ramfunc_ram_size -> __ramfunc_size
- _ramfunc_rom_start -> __ramfunc_load_start
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _data_ram/rom to other symbols and in
such a way they follow consistent pattern which allows for linker script
and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `data`
A new group named data_region is introduced which instead spans all the
input and output sections that was previously covered by
__data_ram_start, __data_ram_end, and __data_rom_start.
The following symbols are aligned in this commit:
- __data_ram_start -> __data_region_start
- __data_ram_end -> __data_region_end
- __data_rom_start -> __data_region_load_start
The following new symbols are introduced so that the data section is
aligned with other sections:
- __data_end
- __data_start
value identical to __data_region_start but describes start of
the section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Commit 6b3c5e8bb2 removed the use of
_DATA_IN_ROM but kept the now unused define.
This commit removes the corresponding define which is no longer used.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Removed stray whitespace in readelf infile and outfile flag.
Some bintools use `--arg=<val>`, others `--arg <val>` therefore the call
at this location should not force a space, as that will fail on tools
using `=`, as this becomes: `--arg= <val>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Commits affecting Zephyr that are included with the new revision:
1e0f283c71 zephyr: Make direct image upload configurable
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
PM_DEVICE_STATE_RESUMING and PM_DEVICE_STATE_SUSPENDING
are transitional states and are only used in device runtime. Remove it
and use device flag to keep track of a transition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
by including interrupt allocation feature whenever an Xtensa-based
Espressif SoC is selected.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
to make use of Espressif's hal in order to ease both
driver maintenance and code reuse between socs.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
The magic code to identify context content is a 32-bit value
defined in the dma.h. When tested against the dma_context magic element,
both format must be aligned.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In the dma.h there is a dma_ctx structure using a magic code
to be identify. This structure must be prepared as a new
element of the dma_stm32_data.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for specifying a custom OpenOCD command to be used for
resetting and halting a target.
As noted in the OpenOCD documentation, not all targets support the
"reset halt" command for halt-on-reset.
Some targets support a software emulation via the "soft_reset_halt"
command. Other targets may require a custom command (e.g. a command
defined in the target configuration file).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This fixes/improves the rounding errors that are introduced
through the truncation of integer division.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
'err' is already defined in parent scope, we can use. Just need to set
it back to 0 before returning from function.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This was changes when sync chain handling was done in lll_scan_aux, we
can now revert to original code.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need more RX nodes when scanning either extended/periodic advertising
trains and CTE samples so pudate those values based on observer and DF
features enabled.
The number of nodes for non-DF allows to scan complete chain for each
aux scan set (assuming max data length and optimal fragmentation by
advertiser), for DF it allows to scan max possible PDUs and CTE samples.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising train scanner implemented in lll_scan_aux adds lots
of branches that cannot be compiled out with periodic advertising sync
disabled.
This commit moves sync parts of the code from lll_scan_aux to lll_sync.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising PDUs are now dispatched immediately one by one
(i.e. without list of PDUs as when flushed from aux context) so we
do not need to iterate such a list.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA, TargetA, ADI and SyncInfo are RFU in periodic advertising PDUs so
we should ignore them when present in PDU.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising reports can be reated directly from single PDU
as they do not require any information from superior PDU, so we can
dispatch them immediately instead of buffering in aux context and
flushing at the end of chain.
This also resolves proper order of Periodic advertising and IQ reports.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We use 1st node enqueued in aux context to retrieve lll scan/sync
struct, but that only works if we buffer PDUs in aux context. It's
better to store parent lll struct as explicit member in aux context
as this also works if we skip buffering.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds complete support for scanning for periodic advertising trains.
AUX_SYNC_IND is always scheduled from ULL as usual, then code for aux
scanning is reused to allow for AUX_CHAIN_IND scanning scheduled from
both ULL and LLL, depending on AuxPtr.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
aux->rx_last cannot be NULL since it's always set after acquire to a
valid node so the flow in flush() can be simplified.
rx parameter is only used to update PDU chain, then it's overwritten,
so we can instead update PDU chain in caller since there's only one
place when this should happen.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should decide on flush immediately vs. from disabled_cb based on
ull_hdr reference count instead of last rxd node - if ull_hdr has
non-zero ref, then done event is still pending and we should flush
from there.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising reports can have 255 bytes of payload so need to
use that value by default if periodic advertising is enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Update the name of the bt_conn pointers to make it clear
whether the connection pointers are ACL or ISO connections.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make the name of the internal bt_conn pointers explicit as to
whether they point to an ACL or ISO bt_conn.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We add support of mpu v6 therefore it is needed to have a board to
validate that feature. This commit add a new HS nsim simulator
which supports mpu v6.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Add support of ARC mpu v6
* minimal region size down to 32 bytes
* maximal region number up to 32
* not support uncacheable region and volatile uncached region
* clean up mpu code for better readablity
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This commit removes PHY and MDIO specific code from the ATSAM
Ethernet driver and instead relies on a separate PHY driver to
handle the PHY.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This commit adds support for Ethernet PHY drivers via a PHY API.
It also includes a driver for a generic MII compliant PHY
which supports most PHYs on the market.
Separating PHY driver from the SoC specific Ethernet driver
simplifies the Ethernet driver code and enables code re-use.
Drivers for specific PHYs with more advanced features, such as
RGMII delay in PHY can be developed independent of the Ethernet
MAC driver.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Ignore received Extended Advertising PDU with RFU field set
in the Common Extended Advertising Payload Format of the
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines to access hdr_data fields used by interfaces to
populate the Common Extended Advertising Payload Format in
the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines for event instant and event instant latency
maximum values of 65536 and 32767 respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation in Periodic Advertising Synchronization
to support Channel Map Update Indications present in the
ACAD fields of the AUX_SYNC_IND PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Organize in a more logical flow the device state initializer and
the device initializer parts.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Z_DEVICE_STATE_DEFINE macro was conditioned by CONFIG_PM_DEVICE.
This is a problem if one day we have other conditional fields in the
device state field that need to be initialized. The approach has been
changed to have an always existing initializer for the PM field, that is
a no-op if device PM is not enabled.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Create a utility macro to initialize struct pm_device. The initializer
is kept in the pm/device.h header.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The usage field was being initialized using the ATOMIC_INIT macro,
however, it is just a uint32_t variable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The initialization of the struct pm_device pm field found in the device
state can be statically initialized without the need of doing it at
runtime.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make the block of code that is used to release node rx with
type NODE_RX_TYPE_RELEASE to be conditionally available for
other Kconfig selectable features like Extended Scanning.
Previously it was only available for CONFIG_BT_CONN, but now
Extended Scanning with LLL scheduling releases node rx when
radio event is closed due to failure to receive an auxiliary
PDU.
Relates to commit 2feffaf719 ("Bluetooth: Controller:
Release LLL scheduling aux on incomplete data").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of connection handle in the LLL context.
During a central connection, if LL reset is called, then
disabled connection context's handle has to be reset
otherwise new connection creation will fail by detecting
that there exists a connection to same peer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to initiator to check and reject
connection requests to already connected peer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ULL reference count is checked in ULL_LOW context to decide
if LLL events are pending, but the reference count can be
decremented by the ULL HIGH execution context which can
prevent the set `disabled_cb` function not being called due
to no pending event to produce the done events.
Fixed by checking the reference count in the ULL HIGH
execution context using a mayfly to schedule the check.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Zephyr thread awareness is available for openocd but boards don't
have debuggers configuration. This configure OpenOCD runner
automatically to complete configuration.
User still require enable CONFIG_DEBUG_THREAD_INFO=y to visualize
thread debug information.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This patch is the first step to make the rpmsg_multi_instance usable in
a multi-core scenario.
The current driver is using a local driver variable (instance) to track
the number of allocated instances. This counter is practically used to
allocate to the instance the correct portion of the shared memory.
This is fundamentally wrong because this is assuming that it does exist
only one single shared memory region to split amongs all the allocated
instances. When the platform has more than one core this is obviously
not the case since each couple of cores are communicating using a
different memory region.
To solve this issue we introduce a new struct rpmsg_mi_ctx_shm_cfg that
is doing two things: (1) it's carrying the information about the shared
memory and (2) it's carrying an internal variable used to track the
instances allocated in that region. The same struct should be used every
time a new instance is allocated in the same shared memory region.
We also fix a problem with the current code where there is a race
between threads when accessing the instance variable, so this patch is
adding a serializing mutex.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For the instance configuration the rpmsg_multi_instance code is
currently using a set of configuration info coming from two different
sources: the rpsmg_mi_ctx_cfg struct and Kconfig.
This is not only confusing but it's preventing to configure the
instances using information not coming from Kconfig (for example if we
want to configure the instance using DT).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This enables qemu_x86_tiny to be used for more general demand
paging testing where non-pinned code and data is not available
in physical memory at boot. This adds a custom linker script to
qemu_x86_tiny for pinning code and data. In the process, a new
kconfig CONFIG_BOARD_QEMU_X86_TINY has to be introduced to
distinguish from other qemu_x86* boards. This linker script
is based on the generic x86-32 one in
include/arch/x86/ia32/linker.ld, with additions to
put symbols into boot and pinned sections.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a flash-based backing store for qemu_x86_tiny board for
testing demand paging. This allows us to test code execution where
.text section is not in physical memory at boot.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, the main stack is not user mode capable
and it would fail k_thread_user_mode_enter() under
app_b_entry(). So create another thread and stack for app_b
as this stack can be used in user mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When demand paging is enabled and not all generic sections are
in physical memory at boot, only tests the permission up to the end
of the pinned section.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This pins the test_page in memory for tests about memory
mapping. This is simply to make sure the whole array
is in physical memory for mapping or else the mapping
function would fail due to having nothing to map.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are quite a few symbols which are needed before the paging
mechanism is initialized. So they need to be pinned in memory
to prevent page fault early in the boot process.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For testing on qemu_x86_tiny, a little bit more stack is needed.
So add the extra stack for testing.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If pinned section is enabled, _k_neg_eagain should be in pinned
rodata section. So add the check if pinned section is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This puts the fatal error handler into pinned sections so
it can be used to handle fatal errors without causing
page faults.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For hardware stack overflow test, pin the whole stack if
demand paging is enabled and generic sections are not all present
at boot. The whole stack may not be in memory at the time of
test, which would result in double fault (exception being
handled + page fault). So make sure the stack is in physical
memory and mapped before doing any tests.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both arch_k_cycle_get_32() and z_tsc_read() are marked inline.
However, compiler may decide not to inline them which would put
them in the generic text section. Pin them in physical memory
as they are frequently used functions to avoid page fault costs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Although they are marked as an inline functions, the compiler
may decide not to inline them which would result in them being
outside the pinned text section. Since these functions are
required for userspace to work correctly, pin them in physical
memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This function should be pinned in memory instead of simply
putting it in the boot section, as this function will be
used when new threads are created at runtime.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If generic section is not present at boot, the thread stack
may not be in physical memory. Unconditionally page in the stack
instead of relying on page fault to speed up a little bit
on starting the thread.
Also, this prevents a double fault during thread setup when
setting up stack permission in z_x86_userspace_enter().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When converting the address and size arguments for extra mappings,
the script assumes they are always base 16. This is not always
the case. So let Python's own int() decides how to interpret
the values as it supports "0x" prefix also.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, it is possible for data pages to not be
present in physical memory. The gen_mmu.py script is updated
so that, if so desired, the generic sections are marked
non-present so the paging mechanism can bring them in
if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If the BSS section is not present in physical memory at boot,
do not zero the section, or else page faults would occur.
The zeroing of BSS will be done once the paging mechanism
has been initialized.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, the heap object and its backing memory
may not be in physical memory. So initialize those heaps
in pinned region at PRE_KERNEL_1 and the remaining heaps
once paging mechanism has been initialized.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the kconfig to allow reserving a number of page frames
which do not count towards free memory. This is to ensure that
there are enough page frames available for paging code and data.
Or else, it would be possible to exhaust all page frames via
anonymous memory mappings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Although they are marked as an inline functions, the compiler
may decide not to inline them which would result in them being
outside the pinned text section. Since these functions are
required for userspace to work correctly, pin them in physical
memory. This also applies to k_is_user_context().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows memory partitions to be put into the pinned
section so they are available during boot. For example,
the stack guard (in libc partition) is needed during boot
but before the paging mechanism is initialized. Without
pinning it in physical memory, it would fault in early
boot process.
A new cmake property app_smem,pinned_partitions is
introduced so that additional partitions can be pinned
if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During boot process, the boot sections need to be pinned in
memory to prevent them from being paged out (to avoid
pages being paged out and immediately paged in again).
Once the boot process is completed (just before calling main()),
the boot sections can be unpinned so the memory can be
used for demand paging for paging in data pages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If BSS section is not present in memory at boot, it would not
have been cleared as the data pages are not in physical memory.
Manipulating those pages would result in page faults.
In this scenario, zeroing BSS can only be done once the paging
mechanism has been initialized. So do it there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging and pinned sections enabled, it is possible for
data to be brought into physical memory as required by current
execution context. However, the kernel still assumes that all data
pages are present at boot which may not be desirable for certain
scenarios. This introduces a new kconfig to specify that those
data pages other than the boot and pinned sections are not present,
and they would be paged in on demand.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The beginning of code in do_page_fault() is to pin the page
in memory if it is already present in physical memory.
It is there so that if a page is not present, it can proceed
to perform page-in and then pin it. So the counting of
page faults needs to be moved after the pinning code so
it actually counts page faults, and not counting pinning
operations when the page is already present.
Also clarify the comment on the goto statement as it is not
correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The z_main_stack is needed before paging mechanism is initialized
so put the stack into the pinned section to avoid page faults.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces two new macros K_THREAD_PINNED_STACK_DEFINE()
and K_THREAD_PINNED_STACK_ARRAY_DEFINE() to define thread
stack and thread stack array in pinned section.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In do_page_fault(), the incoming page fault address is not
aligned, and it was unconditionally assigned to the page
frame virtual address field. If the backing store simply
returns the virtual address without processing in
k_mem_paging_backing_store_location_get(), this unaligned
address will be passed to arch_mem_page_out(). On x86,
it is further passed to range_map() which asserts if
the physical address is not page aligned. So align
the address to page size before assigning it to the page
frame virtual address field.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This groups the device state variables in their own linker section.
This is needed for demand paging as these variables are needed
during boot where the paging mechanism has not been initialized.
These variables need to be in the pinned section so they can
be accessed during boot.
Note that if device PM is not enabled, the device state variables
are put into BSS. So we need to pin these.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This attaches a unique section attribute for each mem slab
buffer defined with K_MEM_SLAB_DEFINE(). This allows them
to be placed as needed via linker scripts. This is useful
for demand paging as developers can choose which memory
slab buffer is pinned in memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This attaches a unique section attribute for each kheap
buffer defined with K_HEAP_DEFINE(). This allows them
to be placed as needed via linker scripts. This is useful
for demand paging as developers can choose which can be
pinned in memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new __noinit_named() macro which can be used to
attach named section attributes for symbols. The original
__noinit creates a section attribute with source file name
and a sequential counter. This simply replaces the counter
with the supplied name. This is useful for demand paging
as developers can choose which symbols is pinned memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce new Kconfig option MCUBOOT_ENCRYPTION_KEY_FILE. If the
string is not empty Cmake will try to encrypt the final binaries using
the given key file.
Signed-off-by: Helge Juul <helge@fastmail.com>
Some GPIO related calls were not being checked for error.
This patch also fixes coverity issue 236651.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related functions were not being checked for errors.
This patch fixes coverity issue 236653.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for errors.
This patch fixes coverity issue 236650.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
gpio_add_callback was not being error-checked. Some other minor cleanups
(rc var to the top, remove redundant log).
This patch fixes coverity issue 236649.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for error.
This patch fixes coverity issue 236648.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for error.
This patch fixes coverity issue 236647.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the formula used to compute RH/ticks formula according to the Table
9 of the datasheet.
This patch also fixes coverity issue 238360.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the formula that computes T/ticks according to the details found on
Table 9 of the datasheet.
This patch fixes coverity issue 238343.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since periodic advertising chains are available there is
a possibility to send multiple PDUs including CTE in
a periodic advertising event.
This commit enables such functionality in direction finding
transmitter sample.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
STM32U5 support is not yet supported in upstream openocd.
Provide instructions to use STMicro openocd fork as a temporary
workaround.
Additionally, provide openocd configuration to be used for this
target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some targets require no 'halt' to be issued i the gdb server command.
Add a --no-halt option to make it possible.
Keep use of halt as the default case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
I2S direction was not checked correctly in the i2s_nrfx_configure
function.
This patch also fixes coverity issue 238365.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable support for Atmel SAM DAC driver on the following boards:
- sam_e70_xplained
- sam_e70b_xplained
- sam_v71_xult
- sam_v71b_xult
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Enable support for Atmel SAM DAC driver on the following boards:
- sam_e70_xplained
- sam_e70b_xplained
- sam_v71_xult
- sam_v71b_xult
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add Digital-to-Analog Converter driver (based on DACC module) for Atmel
SAM MCU family. Only SAME70, SAMV71 series devices are supported in
this version.
Tested on Atmel SMART SAM E70 Xplained board.
Origin: Original
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This ensures that all mesh settings were removed from persistent storage
after node reset.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds a test checking that a node removes all data from
persistent storage after being unprovisioned.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add sam4l full finite state machine based on Atmel Software Framework.
This allows driver detect protocol errors and sync all requests. This
version is compliance with Linux USB tests.
Note: Tests are timing sensitive and log may affect results.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Fix maximum radio packet size configuration to use 255 bytes
for Extended Scanning and Periodic Synchronization.
Add a Kconfig option so that application can reduce RAM
usage if a specific user scenario can live with smaller PDU
receptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the calculation of auxiliary PDU offset for periodic advertising
AUX_CHAIN_IND PDUs there were used old macro that was removed.
The code didn't compile.
Also there were no support for S2 Coded PHY in the offset calculation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The channels list were originally meant to be used
for multiple bt_iso_chan per iso connect (bt_conn), but
that is not the case for the current API, and won't be
going forward, so the use of the list has been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Delete the "generated_dts_board.h" file which was renamed to
devicetree.h a long time ago and was kept for compatibility.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added missing toolchain name to path for generic.cmake and target.cmake.
Added section explaining the need for, and the use of, the
toolchain/other.h header file.
Signed-off-by: Danny Oerndrup <daor@demant.com>
To ensure that an off-tree toolchain gets the toolchain/other.h header
included, such that it can include the correct header for the
toolchain via the other.h, the define __TOOLCHAIN_CUSTOM__ will be set
when ever the cmake flag TOOLCHAIN_USE_CUSTOM is set.
An off-tree toolchain needs to set the set(TOOLCHAIN_USE_CUSTOM 1) in
the off-tree generic.cmake and/or target.cmake, in order for the
include/other.h to be included. The generic.cmake and target.cmake will
be under ${TOOLCHAIN_ROOT}/cmake/toolchain/${ZEPHYR_TOOLCHAIN_VARIANT}/
As the TOOLCHAIN_USE_CUSTOM is only set for off-tree toolchains, this
has no impact on in-tree toolchains and their functionality.
Fixes zephyrproject-rtos#36117
Signed-off-by: Danny Oerndrup <daor@demant.com>
Add support for setting initial values in bt_vcs_register_param
when registering a VCS service
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Before commit 4f2682bd79
("usb: cdc_acm: avoid spurious interrupt on configured or resume
events") spurious rx-interrupt provided start to read shell tx ring
buffer by CDC ACM UART. Now shell log backend not transmit data,
until CDC ACM UART received data from host.
This PR added invoking interrupt callback if tx interrupt is enable,
when CDC ACM class go to configured state, and flag tx_ready go to true.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
In case that creating a BIG fails due to missing
ISO channel, cleanup_big would try to access a
NULL pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The default latency (0) is an invalid value (minimum is 5).
Set to 10 to match the connected ISO benchmark.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It enables the usart6 to run the testcase with a DMA
tests/drivers/uart/uart_async_api. DMA2 (of type V1)
is configured on channel 5 (request) streams 7 & 2.
USART Tx and Rx PG14 - PG9 pins (14 & 16 of CN10)
are connected to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Do not include ULL header in LLL, instead values and fields
required in LLL shall be declared in LLL contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While reading the code, find typos in the code commits.
tests:kernel:interrupt:src:dynamic_isr, line 110 and 115.
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
The fs_statvfs function assumes FatFs is configured for a fixed sector
size and therefore may return wrong sector sizes when it is configured
for variable sector sizes instead. Fix that by returning the ssize
variable given in the file system object structure.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
The formatting options, passed to the printk, caused warnings when
compiling for native_posix_64.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit moves the '_ifndef' functions that are implemented in the
"3.1. *_ifdef" section to the "3.2. *_ifndef" section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit extends the `Build system integration` section in the Zephyr
modules guide with a description on how a module may append additional
values to Zephyr CMake lists.
This is useful for modules that might need to append values to the
`SYSCALL_INCLUDE_DIRS` list.
This commit is followup to the discussion found in:
https://github.com/zephyrproject-rtos/zephyr/pull/33756
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Inform that the queue has to be initialized in zeroed memory or with
the k_work_queue_init before use.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
k_work_queue_start receives a struct that is expected to be
uninitialized (zeroed). Otherwise the behavior is undefined.
Following the Zephyr semantics, this pr introduce a new init function
for this struct.
Fixes#36865
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit introduces devicetree API in CMake so that devicetree
properties and register block can be used in the CMake build system.
The script scripts/dts/gen_dts_cmake.py processes the edt.pickle and
generates a corresponding devicetree property map in a devicetree_target
that is then used in CMake.
The following devicetree API has been made available in Zephyr CMake:
- dt_nodelabel(<var> NODELABEL <label>)
- dt_node_exists(<var> PATH <path>)
- dt_node_has_status(<var> PATH <path> STATUS <status>)
- dt_prop(<var> PATH <path> PROPERTY <prop>)
- dt_prop(<var> PATH <path> INDEX <idx> PROPERTY <prop>)
- dt_num_regs(<var> PATH <path>)
- dt_reg_addr(<var> PATH <path> [INDEX <idx>])
- dt_reg_size(<var> PATH <path> [INDEX <idx>])
- dt_has_chosen(<var> PROPERTY <prop>)
- dt_chosen(<var> PROPERTY <prop>)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adds an API to query and visit supported devices. Follows the example
set by the required devices API.
Implements #37793.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add supported device information to the device `handles` array. This
enables API's to iterate over supported devices for power management
purposes.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Force the inclusion of a `DEVICE_HANDLE_SEP` at the end of the
devicetree dependency section of the array. This lets us simplify the
implementation of `device_required_handles_get`, as there is only one
symbol the section ends with.
This does not use any extra ROM as the array is padded out to the
original size with `DEVICE_HANDLE_ENDS` anyway.
Also adds a description of the array format where the array is
instantiated.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Optimize the handles array by making the following observations:
* The devicetree ordinal at index 0 in pass1 is discarded by
gen_handles.py, and therefore does not appear in the pass2 array.
* gen_handles.py does not need `DEVICE_HANDLE_ENDS` to determine the
end of the handle array, as that information is present in the .elf.
Therefore, instead of replacing the devicetree ordinal with an
additional `DEVICE_HANDLE_ENDS` at the end (to preserve lengths), we
can simply move the ordinal to the end and have it be the original
`DEVICE_HANDLE_ENDS` symbol. This reduces the size of the array by
one handle per device (2 bytes).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The runtime API is referenced count and uses a uint32_t.
Avoid underflow when dealing with put requests.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Return 0 in cases where the request does not trigger a device state
change, only incremented or to decremented the reference count.
Fixes#37821
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a new section in the API reference for the newly added
devicetree/pinctrl.h macros.
Amend macros.bnf in the guide to reflect the new generated macros for
getting at pinctrl information by name.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This contains accessor macros for getting phandles out of pinctrl
properties by name and index. As usual, the representation in C for a
phandle is a node identifier.
Add these new macros:
- DT_PINCTRL_BY_IDX(node_id, pc_idx, idx): phandle at index idx
in the pinctrl-<pc_idx> property
- DT_PINCTRL_0(node_id, idx): pinctrl-0 convenience for the same
- DT_PINCTRL_BY_NAME(node_id, name, idx): phandle at index idx
in the pinctrl property named 'name'
- DT_PINCTRL_NAME_TO_IDX(node_id, name): convert a pinctrl property
name to its index number
- DT_NUM_PINCTRLS_BY_IDX(node_id, pc_idx): number of phandles in
pinctrl-<pc_idx>
- DT_NUM_PINCTRLS_BY_NAME(node_id, name): number of phandles in a
named pinctrl property
- DT_NUM_PINCTRL_STATES(node_id): total number of pinctrl-<pc_idx>
properties
- DT_PINCTRL_HAS_IDX(node_id, pc_idx): does pinctrl-<pc_idx> exist?
- DT_PINCTRL_HAS_NAME(node_id, name): does a named pinctrl property
exist?
- DT_PINCTRL_IDX_TO_NAME_TOKEN(node_id, pc_idx): convert a pinctrl
index to its name as a token, similar to DT_STRING_TOKEN()
- DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(node_id, pc_idx): like
DT_PINCTRL_IDX_TO_NAME_TOKEN, but with an uppercase result
As well as DT_DRV_INST equivalents, which take inst wherever node_id
appears above:
- DT_INST_PINCTRL_BY_IDX()
- DT_INST_PINCTRL_0()
- DT_INST_PINCTRL_BY_NAME()
- DT_INST_PINCTRL_NAME_TO_IDX()
- DT_INST_NUM_PINCTRLS_BY_IDX()
- DT_INST_NUM_PINCTRLS_BY_NAME()
- DT_INST_NUM_PINCTRL_STATES()
- DT_INST_PINCTRL_HAS_IDX()
- DT_INST_PINCTRL_HAS_NAME()
- DT_INST_PINCTRL_IDX_TO_NAME_TOKEN()
- DT_INST_PINCTRL_IDX_TO_NAME_UPPER_TOKEN()
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We need to be able to access pinctrl-<index> property contents by
name, convert names to indexes, convert indexes to names, and perform
existence checks by name and by index.
This is currently not possible because we don't track these properties
the same way we do other named properties. That in turn is because
they are different then the usual named properties.
The usual case looks like this, picking DMAs just for the sake of
example:
dmas = <&dma0 ...>, <&dma1 ...>;
dma-names = "tx", "rx";
So "tx" is the name for the <&dma0 ...> element, and "rx" is the name
for the <&dma1 ...> element, all in a single "dmas" property.
By contrast, pinctrl properties look like this:
pinctrl-0 = <&foo &bar ...>;
pinctrl-1 = <&baz &blub ...>;
pinctrl-names = "default", "sleep";
Here, "default" is the name for the entire pinctrl-0 property.
Similarly, "sleep" is the name of the pinctrl-1 property. It's a
strange situation where the node itself is kind of a container for an
array of pin control properties, which Zephyr's bindings language
can't really capture and has some special case handling in edtlib.
This is easiest to handle with ad-hoc code. Add special case macros
for pinctrls.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the partition handling code into its own function and rework the
comment. This is prep work for adding additional generated macros to
this function.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the IDT_LIST memory region to the location recommended by
`intlist.ld`. The documentation specifies that this region should not
overlap other regions, and there is no guarantee that the area after the
`SRAM` region is not used. The end of the address space is much less
likely to be a valid RAM address.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the IDT_LIST memory region to the location recommended by
`intlist.ld`. The documentation specifies that this region should not
overlap other regions, and there is no guarantee that the area after the
`SRAM` region is not used. The end of the address space is much less
likely to be a valid RAM address.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Removed implementation that used memcpy of received PDUs and
instead using the free Rx buffers; use the scratch PDU for
transmitting scan requests and connection requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the lll_prof_reserve and lll_prof_reserve_send profiling
functions to use when profiling active scanning and
initiator.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
llcp.conn_param.ack was reset on tx of conn param rsp, however this
should only be done once the expected conn update ind is received
and sets the cu.ack flag to indicate cu procedure 'takes over'.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The newly added CMake installation instruction incorrectly specified
*double* colon (literal block) instead of *single* colon after its list
item.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
These constants are based on (i.e. exactly as) the
recommended values for regular (i.e. non-periodic)
advertising.
The GAP spec does not actually specifiy these numbers (or any
numbers for periodic advertising), but they are sane
numbers to use for periodic advertisement.
The issue with using the non-periodic advertising
whereas the peridic advertising unit is 1.25ms.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix missing implementation to release Auxiliary PDU chains
and then resume back to scanning on primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add PDU time calculation macro for S2 and S8 Coded PHY.
Rename PKT_AC_US to PDU_AC_MAX_US.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing range delay value when calculating the header
complete timeout value for the reception of extended scan
response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the received coding scheme when scanning for correctly
calculating the receive chain delay and on-air PDU time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The RISC-V Platform-Level Interrupt Controller (PLIC) was moved from the
RISC-V Privileged Specification v1.11 to a separate specification
(see https://github.com/riscv/riscv-plic-spec).
Reflect this by not automatically enabling the PLIC interrupt controller
driver for all RISC-V privileged SoCs, but only for SoCs with the
CONFIG_RISCV_HAS_PLIC Kconfig option enabled.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
After 31045c7 was merged, it was possible to use broadcast
iso without CONFIG_BT_CONN, but it did not properly handle
TX as there were missing support to read the buffer
size from the controller, as well as missing support
for handling the number of completed packets event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change so that num_completed_packets event handling is also
enabled for broadcast ISO only builds. This is because sending
data on a broadcast ISO still generates this event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the function out of the ACL group as it may be used
for broadcast ISO only builds.
er 31045c7 was merged, it was possible to use broadcast
iso without CONFIG_BT_CONN, but it did not properly handle
TX and RX as there were missing support to read the buffer
size from the controller, as well as missing support
for handling the number of completed packets event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Define soc_interrupt_init as a weak symbol in the common RISC-V
privileged instruction set SoC support.
This allows overriding soc_interrupt_init for SoCs which are not fully
compliant with the RISC-V privileged specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Define __soc_handle_irq as a weak symbol in the common RISC-V privileged
instruction set SoC support.
This allows overriding __soc_handle_irq for SoCs which are not fully
compliant with the RISC-V privileged specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit updates the `arm_no_multithreading` test to run on the
recently added `mps3_an547` board.
The `mps3_an547` SoC includes the Cortex-M55 processor which implements
the ARMv8.1-M architecture that is not covered by any of the boards in
the current "allowed platforms" list for this test.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes the FPSCR register initialisation validation test
for the ARMv8.1-M architecture.
For ARMv8.1-M, the newly added LTPSIZE field in the FPSCR may always
read the value of 4 when the M-Profile Vector Extension (MVE) is not
implemented or FP context is not active, so we must ignore its value
when validating the FPSCR register initialisation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes the FPSCR register initialisation validation test
for the ARMv8.1-M architecture.
For ARMv8.1-M, the newly added LTPSIZE field in the FPSCR may always
read the value of 4 when the M-Profile Vector Extension (MVE) is not
implemented or FP context is not active, so we must ignore its value
when validating the FPSCR register initialisation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The IPC drivers rpmsg_service and rpmsg_multi_instance are not
explicitly enabling the RX IPM channel when two different devices are
used for TX and RX. While this could be redundant for some IPM drivers,
in some cases the hardware needs to be enabled before using it.
Add the missing calls to ipm_set_enabled() for both the devices.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This became useless when _init_tokens() was refactored not to use
global variables (in "dtlib: use IntEnum for token IDs"), and the
linter is complaining about it now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Similarly to what was done for dtlib, use f-strings in places where it
improves readability. Some places, e.g. __repr__ methods that
construct a string using something like
"<SomeType, {}>".format(", ".join(...))
are better left off as-is.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The library was originally developed before Python 3.6 was the minimum
supported version. Use f-strings now that we can do that, as they tend
to be easier to read.
There are a few places where str.format() makes sense to preserve,
specifically where the same argument is used multiple times; leave
those alone.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There were missing commands in local supported commands list that
are related with connectionless direction finding.
The commands are implemented but they haven't been added
to HCI_Read_Local_Supported_Commands list.
The commit fixes that.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The mps3_an547 board documentation incorrectly referred to the
Ethos-U55 coprocessor as an FPU (floating point unit) when it is really
an NPU (neural processing unit).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This adds a very primitive logic to allow linking a prebuilt
static library of kernel code instead of building the kernel
from source. Note that the library is built with a specific
set of kconfigs, and they must match when building applications,
or else there would be mysterious crashes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Microchip MEC172x series I2C driver implementing controller
and target modes. The driver implemenents its own I2C port
pin control functions and does not depended upon pinmux. Future
updates will make use of PINCTRL when that subystem is finalized.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The device pm actions (low_power or suspend) were switched. Also,
added SOFT_OFF to the suspend action.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Suspend devices when the system goes to STATE_SOFT_OFF.
This state was not triggering any device power management. This should
at least suspend devices as it is done for SUSPEND_TO_RAM and
SUSPEND_TO_DISK.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Enables the dma driver on the mimxrt1064_evk board. The board
documentation is not updated because it already mentions dma driver
support.
Tested with:
- tests/drivers/dma/chan_blen_transfer
- tests/drivers/dma/chan_link_transfer
- tests/drivers/dma/loop_transfer
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the watchdog driver on the mimxrt1064_evk board. The board
documentation is not updated because it already mentions watchdog driver
support.
Tested with tests/drivers/watchdog/wdt_basic_api
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
stm32cube: update stm32f1 to version V1.8.4
stm32cube: update stm32f2 to version V1.9.3
stm32cube: update stm32f4 to version V1.26.1 V1.26.2
stm32cube: cleanup stm32f7 version V1.16.1
stm32cube: update stm32g0 to version V1.5.0
stm32cube: update stm32wl to version V1.1.0
stm32cube: update stm32f0 to version V1.11.3
stm32cube: update stm32f3 to version V1.11.3
stm32cube: update stm32l0 to version V1.12.1
stm32cube: update stm32l1 to version V1.10.3
stm32cube: update stm32wb to version V1.12.0
(including ble library update)
stm32cube: common_ll: Regeneration after cube updates
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
After update of stm32 cube l1 V1.10.3,
SPI_CR2_FRF doesn't exist for all stm32L1 MCU,
thus LL_SPI_SetStandard() is also not defined for all stm32l1 MCU.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Commit c79b1a38aa ("samples: display:
Convert driver and lvgl sample.yaml to use depends_on") started using
depends_on in the sample YAML for a lvgl application instead of
platform_allow.
This breaks build testing with twister and overflow checking enabled
on more resource constrained platforms. The test case's .config
ends up with:
CONFIG_LVGL_HOR_RES_MAX=320
CONFIG_LVGL_VER_RES_MAX=240
CONFIG_LVGL_VDB_SIZE=64
CONFIG_LVGL_BITS_PER_PIXEL=24
And lib/gui/lvgl/lvgl.c, where we allocate a buffer of size:
(CONFIG_LVGL_BITS_PER_PIXEL *
((CONFIG_LVGL_VDB_SIZE * CONFIG_LVGL_HOR_RES_MAX *
CONFIG_LVGL_VER_RES_MAX) / 100)
/ 8)
Require 147456 bytes to build the sample, ultimately overflowing RAM
if you run something along the lines of:
twister -T samples -p <constrained_platform> --overflow-as-errors
This is a reasonable test to be doing to make sure that sample RAM
requirements do not get too big for a subset of platforms that are of
interest, and it no longer works.
To fix it, add a min_ram line for this case so that we can still run
overflow tests on a large set of samples without fine-grained special
casing or creating an ever-growing list of platform excludes for this
test.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The units for these testcase YAML fields are missing, making it
unclear how to use them. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using 3rd Party Toolchains page find out that warning message
can be moved to the top of the page.
Add Windows example in OneAPI.
Style fixing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This adds basic support for the Silabs Si7210 hall effect magnetic
position and temperature sensor. It is able to get magnetic field and
temperature in the default scale of the sensor (depending on the
variant). It also supports going into sleep mode without measurements
through the device power management infrastructure.
It is most notably missing support for scale change, measurement
averaging and filtering, and alert pin configuration (threshold,
hysteris, tamper).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
the correct value is returned when using sensor channel get function to
read z-axis value
Signed-off-by: Vojislav Milivojevic <milivojevicvoja@yahoo.com>
Move the implementation of scan trains after call to LLL
prepare, so that LLL prepare executes without any latency.
To increase radio utilization, LLL prepare should be
scheduled as early in the `ticker_cb` of the radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the return value use to indicate unassigned auxiliary
context when scanning is using LLL scheduling. This can
happen only under LLL scheduling where in LLL auxiliary
channel PDU reception has been spawn from LLL primary
channel scanning and on completion will join back to resume
primary channel PDU scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Keep the default AD Data length to Bluetooth Specification
defined minimum of 31 octets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While reading the code, found some typos in the code comments,
line 226 and 668.
Fix comments to make it more solid.
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
Reduce interval of warning timer, so we can print more
warning messages (ex. MEPC, task ID...) before watchdog reset.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
We add disable event timer at the beginning of critical section
for two reason:
1.For K_TICKS_FOREVER case: since no future timer interrupts
are expected or required, so we disable the event timer.
2.Others case: according it81202 spec, when timer enable bit
from 0->1, the timer will reload counts and start countdown.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Update the connected ISO API to be more
similar to the broadcast ISO API as well
as the HCI spec.
This updated API allows for more flexibility
and will better support scenarios such as true
wireless setup, as ISO channels and connections
are more independent now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix implementation to not to put back the primary channel
scanning to resume state when Extended Scan has used ULL
scheduling which pre-empts the scan window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig options that allow users to select the way the APPROTECT
mechanism is handled in the SystemInit() function.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes accelerometer_handler.cc to import correct header
with TfLiteStatus since c_api_internal.h file was deleted in
the new standalone tflite-micro repo.
Removes import of version.h in main_functions.cc to match
tflite-micro version.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Changes name of folder from tensorflow to tflite-micro and updates docs
to reference TensorFlow Lite Micro specifically instead of TensorFlow.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Updates west manifest and module folder name to point to new
TensorFlow Lite Micro repo Google recently pulled out of
the TensorFlow repo.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Suppress violation, because it is a deliberated deviation.
Noticed, that my previous PR #36420 comments were not correctly
detected by a static analysis tool. Only the first one item
"MISRAC2012-RULE_20_4-a" was detected and suppressed.
Change comment style, so each item will be suppressed.
Comment style defined in PR #36911 as the most suitable
for the analysis tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Currently the default runner of nsim_hs_smp is mdb,
the runner of other nsim platform is nsimdrv, user
can't change the default runner unless he uses
west command(--runner).
With this change cmake will choose runner according
to BOARD_DEBUG_RUNNER or BOARD_FLASH_RUNNER. so if
add -DBOARD_FLASH_RUNNER=mdb-nsim or
-DBOARD_DEBUG_RUNNER=mdb-nsim to cmake command,
the apllication will be run with mdb.
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Following change of HSE clock binding, remove hse-bypass
which is no longer an option and replace it with hse-tcxo
which is the configuration closest to previous status.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32WL, HSE clock can take 2 specific options:
-hse-tcxo
-hse-div2
Enable support for these options.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32WL features a specific HSE clock with dedicated properties.
Add a dedicated binding and update STM32 clock control driver
header to take it into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move this to where priorities are being discussed to keep things in
context and to have all priority types documented in 1 place.
Fixes#21648
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reapply the part of 4b5cd92312
that added new functionality/fixed the actual issues described
in the original commit message withtout the further cleanup.
There was also some cross-commit content from
2b91ebe16e
as part of the cleanup in test_friendship.c which is also included.
+ added cleanup also to test_provision.c on request from Aleksandr.
Original commit msg:
-----------
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
-----------
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This reverts commit 4b5cd92312.
global_device_nbr is used by many bsim tests.
And many of those are now off tree in preparation of the LE-Audio
work. Removing this for cleanliness now is not nice on others.
=> Revert
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The test checks the resistance of ble mesh stack to replay attack.
Replay protection cache shall store seqAuth last frames.
Device shall filter out such messages on the transport layer.
Power on\off sequence shouldn't impact that
since replay protection cache is stored in settings subsystem.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The conversion to devicetree seems to be half lost
for this driver. There are already bindings and nodes for
compatible "altr,jtag-uart", update driver to use it.
Remove last mention of CONFIG_UART_CONSOLE_ON_DEV_NAME.
Resolves#37207
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Update USB configuration and test case.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow UART driver that offload interrupt processing
to workuqueue, like CDC ACM UART to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Enable USB device support because the board uses
CDC ACM UART for console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add hidden Kconfig option to Kconfig.cdc and allow
to configure CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Current USB device controller drivers (drivers/usb/device)
do not use DEVICE_DT_GET but the properties from devicetree,
and USB device controller node is parent for CDC ACM UART and
AUDIO children nodes.
Add USB device controller binding and node to keep the samples
building for native_posix driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB samples to be build.
Follow up on commit e4f89478
("boards: add zephyr_udc0 nodelabel to all boards with USB support")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This adds an example application for the TI INA219 Zero-Drift,
Bidirectional Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This adds support for the TI INA219 Zero-Drift, Bidirectional
Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This commit adds support for the Legend 3.5" board revision.
This board revision is found on the Seagate FireCuda Gaming
Hub and Gaming Drive Hub for Xbox devices. It contains the following
hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
- A PWM LED connected on TIM3 CH3
- An external 24 MHz oscillator
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds support for the Legend 2.5" boards (legend25_ssd and
legend25_hdd) based on the STM32F070CB MCU. These boards can be found in
the Seagate FireCuda Gaming Drive, Gaming Drive for Xbox, SSD Gaming
Drive for Xbox, and Gaming Drive for PlayStation devices. Both boards
contain the following hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
The Legend 2.5" HDD board also contains an activity LED connected on
TIM3 CH3
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Like the first instance of the dma in the stm32l3xx soc,
the second DMA instance of the stm32f373 is of the same type
V2bis (dma request is fixed (no dma-slot).
The dma-cell has channel and config.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Simplify implementation that clears extended scan response
data by moving the length check after the new PDU buffer
has been correctly initialized.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check to validate PHY value in the Auxiliary Pointer
structure in the common extended header format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt_sdp_get_add_proto_param is used to get the protocol
parameter from Additional Protocol Descriptor List.
In order to implement it, one parameter
(proto_profile_index) is added to sdp_get_uuid_data_index
to get the indexed item.
Fix one bug in sdp_get_uuid_data because there may be more
than 2 consequent "seq len item".
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
ARC MWDT doesn't support building Zephyr as an native
application (CONFIG_NATIVE_APPLICATION).
ARC MWDT doesn't support building with CONFIG_NEWLIB_LIBC
as it doesn't have newlib.
Let's explicitly forbid to use these Kconfig options for the
MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Fix include path of headers provided by MWDT toolchain for the
case of MWDT C/C++ lib usage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
As of today we have libraries provided by MWDT build with
stackcheck enabled. So we have to provide dummy
_fstack, _estack to make it working.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ring buffer's static declarations now declare the
ring buffer's data as __noinit, to avoid unnecessary
initialization of the buffer.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The scanner should not cause a device to crash or malfunction
if invalid packets are received.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When using both test-only and retry-failed flags, all tests would be
added to the test queue regardless if they failed or not. This commit
updates the logic to process test-only runs similar as other runs,
by adding tests to the queue with the 'run' operation directly.
Signed-off-by: Andreas Vibeto <andreas.vibeto@nordicsemi.no>
Now that the infrastructure we need is in place, we can allow every
element of DTS_ROOT to have its own dts/bindings/vendor-prefixes.txt
file instead of just special-casing ZEPHYR_BASE (which is always in
DTS_ROOT).
This treats all modules equally and eases out of tree management of
downstream-specific vendor prefixes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's a bit weird to loop over the same list twice like this.
Just unify the two loops into one.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Allowing multiple such files will let higher layers take inputs from
multiple DTS_ROOT directories. This in turn will allow out of tree
bindings to manage their own sets of prefixes without patching
upstream Zephyr's file or doing other similar hacks.
Parse each file into a dict, and merge those dicts into a single
dictionary for the EDT constructor.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If the user passes None, set the internal attribute to an empty dict
instead. This lets us avoid some None checking and simplifies things
without changing semantics -- if the user *does* pass an empty dict,
the results are the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a common extension for YAML files. We don't have to allow it
in upstream zephyr, but we should allow downstream DTS_ROOTs to have
this ability.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a build assert if the device name has been misconfigured. The device
name has a max length of 248. When configured as dynamic make sure that
the initial device length can fit in the dynamic max length.
This prevents us from having to handle length overflow when setting
device name in advertising data which has an 8-bit length field.
Log a warning if failing to set the device name in bt_enable.
Remove unused defines in the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix adv-data command when given arbitrary advertising data in
hexadecimal format. The data_len field should contain the length of the
data which does not include the data type. Instead the AD len field in
the data was given. This caused the AD len field to be increased by 1
in the advertising dat.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In the case where keys are distributed on an unencrypted link,
we got the following call trace:
- bt_smp_recv()
- smp_error()
- smp_pairing_complete()
- bt_conn_security_changed()
- smp_pairing_complete()
- bt_auth->pairing_failed()
- smp_reset()
- bt_auth->pairing_failed()
- smp_reset()
To avoid the second call to bt_auth->pairing_failed()
we validate the that smp flags before calling the callback.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
esp32c3 has already supported RISC-V GP, just apply new kconfig option
to it. Forcely select CONFIG_RISCV_GP in esp32c3 at first because it
seems to be necessary in the esp32c3 SoC.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add norelax option before initializing GP at common entry point.
Remove __global_pointer$ symbol in the SoC linker script because it's
in the arch one. Remove -mno-relax when GP support is enabled.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Initialize GP at common entry point of riscv-privilege SoCs so that
this commit add GP support of these SoCs at once.
As some privilege SoCs want to customize the entry point, they should
disable linker relaxation by `.norelax option` before entrying the
common entry point `__start`.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Enable RISC-V GP relative addressing by linker relaxation to reduce
the code size. It optimizes addressing of globals in small data section
(.sdata).
The gp initialization at program start needs each SoC support. Also,
if RISC-V SoC has custom linker script, SoC should provide
__global_pointer$ symbol in it's linker script.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Coding scanning tool raises a violation that happens dereferencing
of the "work" pointer in the expression "work->handler"
As were discussed before in PR #35664 it is not true.
Add explanation comment, because static code analysis tool
raised false-positive violation there.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
bugfix: NULL termination is required by
dns_resolve_reconfigure API so null terminate the DNS
server list.
Fix checkpatch warning.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Include sys/atomic.h instead of sys/atomic_builtin.h, so that build for
platforms with non-default atomic implementation will still succeed.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
(Re)setting the connection handle in hci_disconn_complete
should not be done as the handle are used for
logging/debugging purposes after this, and makes it
impossible to lookup the handle of disconnected
connections.
The connection handle is set to 0 during bt_conn_new
in any case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
No initialisation will lead to undefined behaviour in check for
BT_L2CAP_RECONF_INVALID_MPS.
This is affecting L2CAP/ECFC/BV-23-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix missing synchronization when stopping primary and
auxiliary PDU scheduling.
Added implementation to ensure primary and auxiliary event
count match when terminating extended advertising on maximum
number of events or on duration.
Fixes#37571.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Max events and duration parameter are not used in high duty
cycle directed, hence correctly initialized them and not
depend on the caller of advertising start API to set them
to zeroes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increases the friendship unseg app payload size in the friend message
test and enables asserts to test the error described in #37519.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
unseg_app_sdu_decrypt decrypts messages in place using a single net_buf.
While this is safe in terms of data access, the buffer state is
manipulated with the assumption that they're two different buffers, and
the output buffer's length field is increased at the end. When
assertions are enabled and the pdu length is 11 or 12 bytes, this
triggers the net_buf length assert, as the decrypt function attempts to
add the pdu length to the out buffer, with the assumption that it was
reset before decryption was started.
Create a separate output buffer with len = 0 to avoid triggering the
assert. Improve readability of the unseg_app_sdu functions to highlight
the need for the additional buffer.
Fixes#37519.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Allow the application to configure the advertiser as scannable when it
does not provide scan data in the call to bt_le_adv_start. This makes it
possible for the application to later add scan response data in the
bt_le_adv_update_data call.
This aligns the legacy code path with the extended code path which
already had this behavior.
This also stops a directed connectable advertiser from being marked
internally in the host as scannable. This appears to not have been
causing any issues.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document the behavior of the include name option when this is changed by
updating the advertising parameters of the advertising set.
In this case we cannot update the advertising data since the host does
not have a copy to modify. The application will have to do update with
its current advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix non-connectable advertiser configured as ADV_SCAN_IND when
configured by application to have the device name appear in the
advertising data instead of the scan response data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Disallow creating an extended scannable advertiser with the device name
configured to appear in the advertising data.
This would fail in either the call to bt_le_ext_adv_start or
bt_le_ext_adv_set_data when the host would try to set advertising data
in the controller.
Instead this now fails in the bt_le_ext_adv_create call.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
net_buf_skipcrlf() will remove all \r\n characters from the buffer.
If the data after CONNECT\r\n contained \r or \n it would
be removed, resulting in dropped data.
Fix this to only remove two bytes to ensure data is not dropped.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Change socket RX trailer (EOF) missing to warning and
keep socket RX data instead of discarding.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Add support for passing the --config argument to the openocd west runner
multiple times.
This allows for using modular openocd configuration files (e.g. CPU core
configuration in one file, independent of the selected JTAG interface
type).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
So far pcie_get_mbar() has been the only way to retrieve a MBAR. But
it's logic does not fit all uses cases as we will see further.
The meaning of its parameter "index" is not about BAR index but about
a valid Base Address count instead. It's an arbitrary way to index
MBARs unrelated to the actual BAR index.
While this has proven to be just the function we needed so far, this has
not been the case for MSI-X, which one (through BIR info) needs to
access the BAR by their actual index. Same as ivshmem in fact, though
that one did not generate any bug since it never has IO BARs nor 64bits
BARs (so far?).
So:
- renaming existing pcie_get_mbar() to pcie_probe_mbar(), which is a
more relevant name as it indeed probes the BARs to find the nth valid
one.
- Introducing a new pcie_get_mbar() which this time really asks for the
BAR index.
- Applying the change where relevant. So all use pcie_probe_mbar() now
but MSI-X and ivshmem.
Fixes#37444
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This sets the dts of DMA for using pn the uart 2 i.
The stm32h723 has a DMAMUX and request are 44 and 43 for usart2
The Tx&Rx pins PD5 and PD6 of the usart2 are connected
on the nucleo_h723zg board to pass the test
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is the configuration of the stm32h723 where the
dma1 & dma2 of type V1 with a MUX. Even if DMA is of type V1,
the 'feature' does not exist with DMAMUX
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This enables defines the usart2 on PD5, PD6 pins
of the nucleo stm32h723zg target board. Pins are available
on the CN9 pin6 & 4 of the MB1364 nucleo144
Signed-off-by: Francois Ramu <francois.ramu@st.com>
There is a problem with the previous method, that is,
we use the same label(bt_mesh_subnet_cb_subnet_evt) and
put it in the same section, which is not friendly for debugging.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This prevent the new thread to attempt accessing cached ptable entries
which are no longer valid.
Signed-off-by: Manuel Argüelles <manuel.arguelles@coredumplabs.com>
Use 0.11.1 to build the docs. The docstrings are the same as 0.11.1a1,
so it doesn't make a difference in the output, but let's keep things
clean now that the final release is up.
Fix typos in the release notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
- Fixe reversed UART TX/RX pins info
- Added info about CONFIG_FPU in case of Telink's toolchain
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
The RT1170 platform adjusted the result parameter in the callback
function to be a uint64_t. The adjustment is to conditionally change
the callback definition and then cast the result value to a size that
fits the reported values across the various SOCs.
With error results, cast result to uint64_t and modified the called
function to print a uint64_t value.
With the RX/TX status, result is a MB value that doesn't exceed 64
so the result value is cast down to a uint32_t.
Fixes#37691
Signed-off-by: David Leach <david.leach@nxp.com>
With the change to cmake_minimum_required(VERSION 3.20.0) then this
commit is no longer needed.
This reverts commit 6ca2bf25cb.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update docs to reference CMake 3.20.0 as minimum required version.
Added Kitware APT repository to the getting started page.
Updated installation Linux download descriptions from CMake 3.15.3 to
CMake 3.21.1 as that is the version currently being installed when
using the Kitware APT repository.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
CMake >=3.20 requires file extensions explicitly added to source files.
See CMP0115:
> Starting in CMake 3.20, CMake prefers all source files to have their
> extensions explicitly listed:
This manifest update pulls in update for the lvgl module adding missing
extension.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is necessary to get some samples to link properly when moving
from device_get_binding() to DEVICE_DT_GET and friends. In particular
I ran into issues building i2c_fujitsu_fram without a real I2C device.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
1. Update soc.c file to add USB clock setup
2. Add a linker script file to move USB transfer
buffer and controller buffers to USB RAM
3. Update Kconfig's to add USB support
4. Add zephyr_udc0 nodelabel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update soc.c file to add USB clock setup
2. Add a linker script file to move USB transfer
buffer and controller buffers to USB RAM
3. Update Kconfig's to add USB support
4. Add zephyr_udc0 nodelabel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The USB config name has changed to USB_MCUX and the
device tree node name has changed from nxp_kinetis_usbd
to nxp_mcux_usbd
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Add support for NXP LPC USB controller
2. Do not check the return value from the
kUSB_DeviceControlRun command as not all SDK drivers
return a value
3. Use the kUSB_DeviceControlPreSetDeviceAddress
command to set device address
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Clarify the PWM pwm_pin_set_cycles() function API details.
The API aims for synchronous (glitch-free) updates of the PWM period and
pulse width, but not all PWM controllers support this.
Similarly, the API aims for independance between channels on
multi-channel PWM controllers, but not all PWM controllers support this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses reference to zephyr_udc0 and remove
board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB devicetree nodes in Zephyr have different names,
mostly derived from the designations in data sheets.
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB sample to be build.
Follow up on commit b4242a8 ("boards: add USB node aliases")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update periodic advertising data update rate. The periodic advertiser
is configured with a periodic advertising interval of 2.4 seconds but
updating the data every second. This leads to many of the advertising
data values not being sent at all.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a test to check value of the IV Update
counter at the time of provisioning based on
the status of IV Update flag. Also ensures that
the counter is reset if the mesh stack state
is reset.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When device is first provisioned with IV Update
flag is set to 0, it should wait for minimum of
96 hours before going into IV Update In Progress
state. Such limit does not apply, if device is
provisioned with IV Update flag is set to 1.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
This commit tests persistence storage for access layer:
- Model publication
- Model subscription
- Model app keys binding
- Model data
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commits fixes an issue where an existing entry in a settings file
causes settings file corruption when storing new value.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Name length can't be longer than 8 bytes. This needs to be clarified
in the bt_mesh_model_data_store() documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Change the fail handling of setting the CIG parameters
(or when allocating the CIS) to unref the ISO conns
instead of calling cleanup on them directly.
This fixes an issue that if the CIG parameters failed,
then the iso conns would not be unref'ed and we could
not try again.
Unref'ing an iso conn will call cleanup once it hits 0
refs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A channel should only be allowed to unbind when in
the BT_ISO_BOUND state. If it is in a disconnected state,
then it the function would have meaning. If it is a connected
state, unbinding it would generate an error when removing
the CIG, which would fail silently.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable PWR clock unconditionally for L4, L5 and U5
like it is done on other stm32 series
Fixes#37781
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This is now failing an edtlib check for unknown vendor prefixes.
I can't find a reason to use a vendor prefix in application-local
bindings like this, so just remove it wherever it appears by
normalizing to test-foo-compat instead of test,foo_compat or
test,foo-compat.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Increases the default CONFIG_TEST_EXTRA_STACKSIZE for the 32-bit RISC-V
architecture. This fixes the portability.posix.fs test on the
qemu_riscv32 platform.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add unit tests for HCI commands:
- HCI_LE_Set_Connection_CTE_Receive_Parameters,
- HCI_LE_Connection_CTE_Request_Enable.
Tests validate current implementation of commands handling in HCI/ULL.
Handling of the HCI_LE_Connection_CTE_Request_Enable is not complete,
thus tests don't validate positive behavior the functions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
LE Set Connection CTE Receive Parameters HCI command size may not fit
into HCI TX command buffer size, which default value is 65 bytes.
For platforms other than Nordic there may be up to 75 antenna IDs
put into the command.
Added new default value for SOCs not compatible with Nordic to
extend default TX buf size to 83 bytes (75 bytes for antena IDs,
5 bytes for other command parameters, 3 bytes for command header).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add functions that handle enable CTE request control procedure
request from host.
Implementation of ll_df_set_conn_cte_req_enable in ULL is partial.
It will be integrated with refactored implementation of control
procedures.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add struct ll_df_conn_rx_params sturcutre to struct lll_conn.
This is storage for parametrers required to configure radio
for CTE reception in connected mode by lower link layer.
Add required includes to make the controller code compilable
after change struct ll_conn.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Set_Connection_CTE_Receive_Parameters handling is required to
enable sampling of Constant Tone Extension in connected mode.
The commit adds handling for HCI_LE_Set_Connection_CTE_Receive_-
-Parameters command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add struct ll_df_conn_rx_params sturcutre to struct ll_conn.
This is storage for parametrers required to configure radio
for CTE reception in connected mode.
Add required includes to make the controller code compilable
after change struct ll_conn.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new strcture type for storage of CTE receive parameters.
The structure will be used in to store parameters for connected mode.
The parameters provided by HCI commands for receiving CTE
in connected mode and disconnected mode are a bit different.
There is common subset of parameters but extraction of those
into common structure would increase of size of other stuctures
that aggregate them.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Code related with connected mode was in middle between connectionless
RX and TX. Moved to the bottom of the file.
Added missing compilation guards for ll_df_set_conn_cte_tx_params.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add features: connection CTE request, connection CTE response
and receiving constant tone extensions; to HCI and features
supported by controller.
The features are not enabled yet.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Compute the SHA256 hash of the downloaded image and compare that with
the hash in the deploymentBase to guarantee that only the correctly
downloaded image will be flashed.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Use a semaphore to prevent the hawkbit_probe from running more than once
at the same time since it reset the hawkbit context on entry and will
affect other running instance.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix multiple typos and make the sample's log output consistent
with the subsys.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Co-Authored-By: Sylvio Alves <sylviojalves@gmail.com>
The delay will ensure last byte has been latched in before
This also change the method of reading status register from re-send
read status command on each read to read status register continuously.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When there is no grove sensor driver enabled, cmake warns
that the library has no sources. Fix that by adding
a new kconfig to be used by CMake to selectively
include the grove directory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When there is no sensor driver enabled, cmake warns that
the library has no sources. Fix that by wrapping cmake
library instructions inside kconfig.
Fixes#37765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When there is no console driver enabled, cmake warns that
the library has no sources. So only include the console
directory when CONFIG_CONSOLE is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
log and libc optimization default config are soc related
and should be moved out from board context.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add workaround for no command buffer available when the host is
transmitting Host Number of Completed Packet Commands.
This command does not follow normal flow control of HCI commands and
the controller side HCI drivers that allocates HCI command buffers with
K_NO_WAIT can end up running out of command buffers.
Increase the command buffer count from 2 to 10 for the HCI uart driver
until the issue has a proper fix
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This reverts commit 7b09d031fa. Because
context save of GP register is removed, we don't need to initialize GP
at thread init. GP will be a constant value so that it could only be
initialized at program start.
Signed-off-by: Jim Shu <cwshu@andestech.com>
RISC-V global pointer (GP) register is neither caller nor callee
register, and it's a constant value in the single ELF file. Thus, we
don't need to save/restore GP at ISR enter/exit. Remove it to optimize
context switch performance.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In commit 00f9503293 to make
k_current_get() work without syscall, a new z_current_get()
was introduced since there are times when thread local
storage has not been initialized. However, this was not
marked with const attribute the same as k_current_get().
This may result in slower compiled code as each call to
z_current_get() may actually need to go through the whole
function call process instead of reusing the result from
previous call in the same scope. So add const attribute
to z_current_get() to restore the old behavior.
Fixes#37460
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Document the change in behaviour for `lora_send` and how to get back
the original behaviour.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Detect failed transmissions using `lora_send` by only waiting for some
multiple of the actual on-air time before giving up.
We use this instead of the inbuilt TxTimeout functionality because the
value of this timeout is set by `lora_configure`, and therefore doesn't
change with different packet lengths. This is a limitation of the
underlying `RadioSend` function, not the Zephyr driver.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Change the behaviour of `lora_send` to block until the transmission
completes. The current asynchronous behaviour is exposed through the
new function `lora_send_async`. This naming convention brings LoRa in
line with other asynchronous subsystems.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
1. Do not throw an error when FSL_FEATURE_USDHC_HAS_HS400_MODE
is defined
2. Add support for the case when the card detect is handled
by the USDHC module
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The commit applies changes that are required by update of ELM Chan's
FAT FS driver update to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit updates revision of the Zephyr for of ELM Chan FAT FS
driver to the revision that updates source code to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing EGU nodes. We already have a compatible for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing EGU and TIMER nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing FICR, UICR, RADIO, and EGU nodes. We already have
compatibles for these defined, and the peripherals are present, so
define them for consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing FICR, UICR, RADIO nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The way we currently handle direction finding extension (DFE) support
on Nordic nRF5 controllers relies on required devicetree properties
related to DFE in the "nordic,nrf-radio" node.
That doesn't make sense on radios without DFE support, though.
Any .dtsi for an SoC without DFE support which has such a node would
require extraneous DFE related properties like dfe-antenna-num.
Instead of making the properties required, mark them optional. We
indicate the presence of DFE support via a new 'dfe-supported' boolean
property which the SoC .dtsi files can set (or not) depending on
support.
This gives us the opportunity to do some cleanup in the Kconfig,
removing CONFIG_HAS_HW_NRF_RADIO_BLE_DF since we know from the
devicetree whether DFE support is available.
Handle that change appropriately in radio_df.c. This gives us an
opportunity to improve readability in the devicetree-related macro
magic in that file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The documentation for Bluetooth Direction Finding Extension (DFE)
samples has various issues:
- references to 'child' images, which do not exist in mainline zephyr
- invalid RST syntax: there are missing ` characters to end arguments
to :zephyr_file: roles, creating unintelligible output
- incorrect RST usage:
- using :zephyr_file: instead of :file: when referring to a file
that the user must create, creating broken links to nonexistent
files in the zephyr tree
- using :code: instead of :kconfig: to refer to kconfig options,
creating output without links to the help for those options
- redundant or duplicated information
- grammar, typos, various bits and pieces
Clean this up. As part of that, move various common bits and pieces of
information to the devicetree bindings index so they can just be
linked to from the sample docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Sort by unit address. This involves multiple files since there are
includes and secure/non-secure files to deal with.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There are no reference for either K_NUM_PRIORITIES or
K_NUM_PRIO_BITMAPS, with the former being dropped in:
1acd8c2996 kernel: Scheduler rewrite
Dropping both of these, and also the two comments about extra priorities
taking extra RAM space, as those do not seem to apply either.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Document devicetree compatibles which have changed recently and that
have drivers, along with how to handle them.
Recent changes to things like / and CPU nodes aren't worth mentioning
since there are no drivers for such things. I'm similarly not going to
document the vexriscv change since it seems likely that users are
getting this compatible via the DTSI file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Commit c4079e4be2
("scripts: rework edtlib warnings-turned-errors") was trying to abort
on unknown vendor prefix, but the error log is not fatal.
Fix it by using the same error handling function we use when aborting
due to deprecated property usage.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There are way too many one-off vendor prefixes set up for individual
boards to bother tracking them in vendor-prefixes.txt. As a practical
matter, the compatible for the root node doesn't matter anyway. So
just relax our check for that node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a 'mxicy' entry in vendor-prefixes.txt for this vendor. Use it
to be consistent. Linux's
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml file allows
both, but I'd like to see what happens if we try to be consistent in
Zephyr. There isn't a binding for this compatible in zephyr, so I'm
hopeful this won't break any upstream use cases.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These are using unknown vendor prefixes.
I did find references to a Nanjing Tianyi Hexin Electronics Co., Ltd.
on Crunchbase and I thought about adding a vendor prefix, but I can't
justify it since it's just a single board that is using it, and there
is no upstream driver.
Similarly, I found hynitron.com, which seems to be an electronics
vendor, but Google Translate says their "about" page translates to
"Incomplete website information, please contact sales" (and the
English version contains no text).
Just change ',' to '-' instead so there is no vendor prefix anymore.
We can revisit this if anyone wants to upstream drivers for these
compatibles in the future, but for now it doesn't seem worth it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This has an unrecognized vendor prefix which does not seem to serve
any purpose. Removing it is a way forward to turning warnings into
errors on unrecognized vendor prefixes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The Linux vendor prefixes list uses 'cdns'. Match it, especially since
we have that prefix in our own list as well.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These IP blocks' vendor is Cadence, whose proper vendor prefix is
'cdns' if we are going to match the Linux vendor prefixes list.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
As far as I can tell, 'vexriscv' does not name a vendor:
https://github.com/SpinalHDL/VexRiscv
It also doesn't seem entrenched enough to merit a special case
exception to the de factor rule 'the "vnd,foo" namespace is for
vendors'. This is open to debate and we can revise as needed in the
future, but for now let's just rename the compatible to avoid
triggering warnings/errors about unknown vendors.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The original NIOS-II developer and former vendor is Altera, which is
now part of Intel. Let's not add a new vendor prefix for something
that already exists and has been acquired; move it to use the existing
'altr,' prefix instead.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
I can't find any reference anywhere showing that the manufacturer of
the LPD8803 or LPD8806 LED scripts is a company called 'colorway'.
Use 'greeled' instead; these seem to actually be manufactured by
GreeLed corporation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be "maxim,max30101", because the vendor prefix for this
company is "maxim", not "max".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be "u-blox,sara-r4", because the vendor prefix for this
company is "u-blox", not "ublox".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a ftdi,ft800 binding, and it's easy to imagine additional
bindings coming in the future since their USB/UART chips are very
commonly used.
I didn't find anything in Linux for this vendor.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is used for microbit,edge-connector. I couldn't find anything in
Linux, which is not surprising given these boards have constrained
Cortex-M chips.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have various compatibles matching this in a DTSI file.
Linux tracks this vendor too:
4071883fd8
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a binding for apa,apa102 in zephyr.
I can't find any bindings for this vendor in Linux.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a binding for compatible "quectel,bg9x".
I can't find any bindings for this vendor in Linux.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This PR will change accessing the related pinctrl macro from soc_dt.h
And the pinctrl of SCL and SDA were got from pinctrl-0 and pinctrl-1,
respectively. Change it to get from pinctrl-0 only.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit enables the ARM DSP extension on the MPS2 AN521 SoC CPU1
(the CPU1 supports both FPU and DSP).
With this change, the CMSIS-DSP tests running on the
`mps2_an521_remote` board will use the DSP instructions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The CMSIS-DSP matrix binary_q15 tests should not be excluded on the
mps2_an521 board, which is one of the integration platforms.
This test was likely excluded because of the computation precision-
related failures; but, this failure is no longer observed, so there is
no reason to exclude it anymore.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
mps2_an521 so that the integration tests that require large memory can
run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
native_posix and native_posix_64 so that the integration tests that
require large memory can run on this board.
Note that the flash and RAM sizes of 64MiB specified here is an
arbitrary value choosen to ensure that all currently supported tests
can run, since there is no inherent limit for the POSIX boards.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
sam_e70_xplained so that the integration tests that require large
memory can run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
frdm_k64f so that the integration tests that require large memory can
run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP transform test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filter and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP svm test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP support test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP statistics test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP matrix test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filters and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP filtering test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filters and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP fastmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP distance test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP complexmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP bayes test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP basicmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP basicmath benchmark
that enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit that added this board forgot to add the simulation type and
the ARM FPU tests were being only built.
This commit adds the `simulation: qemu` property to enable running the
ARM FPU tests in QEMU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Ring buffer claims that no synchronization is needed
when there is a single producer and single consumer.
However, recent changes have broken that promise since
indexes rewind mechanism was modifing head and tail
when consuming. Patch fixes that by spliting rewinding
of indexes so that producer rewinds tail only and
consumer rewinds head.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test cases that validates if ring buffer handles
correctly case with single producer single consumer from
different contexts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Keep daily docker image in sync with PR based CI image. Need
this for both fix for uefi-run and cmake.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a little wait before completing the test to ensure both
central and peripheral side of the test completes before the
test exits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan_data_status value from being incorrected OR-ed with
the advertising data status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the implementation deciding the use of LLL
scheduling for scanning PDUs with close auxiliary offsets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to release Auxiliary Context on failure
to receive auxiliary chain being in LLL scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We need to alloc node prior to calling lll_scan_aux_setup, otherwise
the same node will be peeked inside that function and it will overwrite
some data in our node (e.g. "extra" field).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to use LLL scheduling for close auxiliary
offsets when active scanning and initiating connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to resume primary PDU scanning window
after use of LLL scheduling to receive auxiliary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Auxiliary PDUs are scanning by the primary scan's LLL
scheduling, then flush the Auxiliary PDUs when processing
them in the ULL instead of using the disabled callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This can be used to check if pointer is a valid lll_scan_aux pointer,
e.g. if we need to decide what kind of struct is attached to RX node
for further processing.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to reset isr status before returning as otherwise irq will be
triggered over and over again.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to traverse the Extended Active Scanned
advertising PDUs, generate the Scannable Advertising and
Scan Response Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Active Scanning hold back the received PDUs in
a linked list and send it to HCI together so that fields
present across these PDUs can be aggregated for generating
the LE Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Flush the scanned advertising PDUs to HCI while receiving
the scan response PDU when Extended Active scanning.
This reverts earlier implementation to remember the
advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Extended Active Scanning and generation of
Extended Advertising Report with Scan Response event type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reverting Extended scanning with LLL scheduling as this is
causing unresolvable merge conflict with the commits that
is implementing the Extended Active Scanning support.
Subsequent commit add the revert implementation back again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After the modules are adapted for the revised
USB device stack configuration, and it seems that
it was only necessary for MCUboot, we can finally
remove Kconfig option CONFIG_USB.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Similar to commit 9512ae488a
("boards: remove USB option for nRF based boards")
Also remove not necessary UART_INTERRUPT_DRIVEN and
duplicate CONFIG_USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Checks PAN ID for matching self address / broadcast, then the short /
extended address based on the used address mode.
Only when IEEE802154_HW_FILTER is not advertised by driver.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
This adds the driver for Omnivision OV2640 image sensor.
The driver provides support for 10 different resolutions in range from
160x120 to 1600x1200 in both JPEG and RGB565 pixel formats. There are
also mutliple configuration options, e.g. hflip, vflip, saturation and
brightness control.
Signed-off-by: Robert Szczepanski <rszczepanski@antmicro.com>
Thumb/ARM interworking causes problems with Zephyr's multiple link build
process when userspace is enabled. When compiling with userspace, the
first link process uses a dummy PROVIDE in the linker script for
z_object_find and z_object_wordlist_foreach. This dummy symbol is
treated as an ARM function call, but one of the calling functions is in
thumb mode. The compiler generates a veneer for thumb functions to call
z_object_wordlist_foreach. On the final link step, z_object_find and
z_object_wordlist_foreach are real functions and get compiled in thumb
mode, thus no veneer is generated in the text section. This means that
the .text size changes between the second and third link steps changing
the start of the devices section. That causes the kobject code to look
in the wrong spot for kernel objects and a crash ensues.
Workaround this for now by only compiling in ARM mode so that no veneer
is needed. Thus the section sizes stay the same during the different
linking steps.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
This macro is referenced by most of the architecture linker scripts, yet
it is only defined in the Metaware toolchain linker header.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The Cortex-R architecture uses the threads stack to save context.
However, that is a security hole since a userspace thread could
manipulate the stack pointer before performing a system call and cause
the kernel to write to memory that it should not. This test will sanity
check that the Cortex-R svc and isr routines do not write to a userspace
supplied stack.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The default address for FAULTY_ADDRESS is valid on the qemu_cortex_r5
board, so use a value that is not mapped for that board.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The Cortex-R platforms may no use XIP which means userspace code with
have read and execute access to some of the RAM so that it can execute
code. However, userspace will not have access the the protected
read/write parts of RAM so it is safe to use the Cortex-M version of
trigger_fault_access for this test.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
QEMU supports the MPU on Cortex-R platforms so enable it for the
qemu_cortex_r5 platform. This allows running the mem_protect kernel
tests.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Related to github #22290. Getting interrupt during mpu buffer validate
is corrupting index register. Fix applied to ARC is to disable
interrupts during the buffer validate operation.
Signed-off-by: Phil Erwin <phil.erwin@lexmark.com>
When running non-XIP, userspace threads need to be able to read .text in
order to execute code. Cortex-R needs to setup an MPU entry to allow
this, but it must be aligned to a power of 2. The linker scripts for
other archs follow this same pattern of aligning the location counter,
but outside of an input section. The linker ignores this and places the
next input section at the LMA of the end of the previous input section.
Avoid this problem by make RODATA the last ROM section. The MPU_ALIGN
can be moved inside the RODATA input section and correctly pad the
entire ROM section out to a power of 2 boundary.
_image_rom_end_order contains the power of 2 alignment which allow the
soc to set the MPU configuration statically based on the size of the ROM
sections instead of having to do it dynamically.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Cortex-A/R does not have hardware supported nested interrupts, but it is
easily emulatable using the nesting level stored in the kernel
structure.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Add functionality based on Cortex-M that enables recovery from a data
abort using zephyr's exception recovery framework. If there is a
registered z_exc_handle for a function, then use its fixup address if
that function aborts.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
With the addition of userspace support, Cortex-R needs to use SVC calls
to handle oops exceptions. Add that support by defining ARCH_EXCEPT to
do a svc call.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The user thread cannot be trusted so do not use the stack pointer it
passes in. Use the thread's privilege stack when in privileged modes to
make sure a user thread does not trick the svc/isr handlers into writing
to memory it should not.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some display drivers may actually be initialized after LittlevGL
as those drivers and LittlevGL's lvgl_init() all have SYS_INIT()
at APPLICATION and init priority the same as application init
priority. Depending on how the final binary is linked, these
drivers may initialize after lvgl_init() resulting in it not
able to find a display driver. This changes the value of
CONFIG_DISPLAY_INIT_PRIORITY so that the display drivers that
make use of this kconfig are initialized a bit earlier to
ensure that they are actually initialized before lvgl_init().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Note that the include to subsys has been moved from
under the drivers into subsys, as it is actually
the subsystem's job to make sure the include
directories are correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a, simply
build a separate static library for the top level of sensor
drivers. Also, for those that were not building its own
static library, make them do so as majority of sensor
drivers are building their own static libraries.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Note that the include to subsys/bluetooth has been
moved from under drivers/bluetooth to subsys/bluetooth,
as it is actually the subsystem's job to make sure
the include directories are correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make subsys/bluetooth/audio build as a static library.
This is in preparation to enable building the bluetooth
drivers as a static library. That would change the line
"zephyr_include_directories(subsys/bluetooth)" where
this include path is applied to all code compiled.
Its removal will result in subsys/bluetooth/audio not
able to find subsys/bluetooth/common/log.h. So change
subsys/bluetooth/audio to be built as a static library
so it can link to the subsys/bluetooth library where
it can find "log.h" there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting the object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the build command so the I2C EEPROM slave
is being grouped into the I2C static library.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the init priority of native posix console to 99.
When building for native_posix, it is usually assumed that
the output would be stdout. With old priority at 60, UART
console, for example, can be initialized later which means
printk() would not go to stdout. So changing the native posix
console to be (hopefully) initialized last.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The zephyr_library_* variant is missing the ability to
include directories based on kconfig. So add the function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The arm64_smp_init() is the same initialization level
and priority as the GICv3 interrupt controller. This means
that arm64_smp_init() can be called before the interrupt
controller driver has been initialized if linker decides
to put the driver init entry later. This would result in
faults when arm64_smp_init() is trying to connect interrupts.
So move arm64_smp_init() to PRE_KERNEL_2 instead. SMP
initialization is called later in the boot process so
this should not affect SMP operations.
This is in preparation of making interrupt controller
drivers to be build as static library. The linking order
is going to change which will result in this being
initialized before the interrupt contoller driver.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adding board bl654_usb which is a Laird Connectivity BL654 module
mounted on a USB adapter.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
Adds a low_lat name to the duplicated low_lat babblesim tests to allow
them to run in parallel with their counter parts.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
_pm_devices, pm_suspend_devices, pm_low_power_devices and
pm_resume_devices are only used if CONFIG_PM_DEVICE is defined and not
CONFIG_PM.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix a race condition that caused the Controller to deadlock
waiting for a semaphore that be given when LLL events have
been disabled.
ULL reference count is checked in thread context to decide
if LLL events are pending, but the reference count can be
decremented by the ULL execution context which prevents the
set `disabled_cb` function not being called due to no
pending event to produce the done events.
Fixed by re-checking if reference count is zero and avoid
waiting to take the semaphore.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While RADIO_DFECTRL1_TSAMPLESPACING and RADIO_DFECTRL1_TSAMPLESPACINGREF
has similar values, but they are logically different.
As expected by "radio_df_ctrl_set" function, TSAMPLESPACING should be
passed to this function not TSAMPLESPACINGREF.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
When events are placed back into pipeline as resume events,
only remove duplicate resume events and not new prepare
events that may have been enqueue between the start of the
pre-empt ticker and its timeout.
Due to new prepare events that was removed, extra done
events generated cause the number of enqueued done events
to overflow and assert.
Fixes#36381.
Fixes#37597.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the incorrect iterator index being reset when flushing
duplicate resume events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the AD data race condition handling with explicit
revert of `pdu->last` value after detecting the race.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add workaround for no command buffer available when the host is
transmitting Host Number of Completed Packet Commands.
This command does not follow normal flow control of HCI commands and
the controller side HCI drivers that allocates HCI command buffers with
K_NO_WAIT can end up running out of command buffers.
Increase the command buffer count from 2 to 10 for the affected drivers
until the issue has a proper fix.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Its possible that a dts binding doesn't inherit from base.yaml and
thus doesn't have `wakeup-source` defined. To handle these cases
use DT_PROP_OR() which can deal with a property not existing at
all.
Fixes#37676
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
add configuration for testing the spi through the dma1
on the nucleo_l152re target. This test requires the MOSI pin
to be connected to the MISO pin on the board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The STM32_DMA_SLOT macro from include/drivers/dma/dma_stm32.h
must be used here, especially for dma of type v2bis.
In this case, the dma-cell is not defined and slot is null.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add configuration for testing the usart3 through the dma1
on the nucleo_l152re target.This test requires the Tx pin
to be connected to the RX pin on the board.
Pin definition is added for this usart instance.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With CMake minimum required as 3.20.0 we update CI to use docker image
v0.18.2, which contains CMake 3.20.5.
For doc builds we fetch the same CMake v3.20.5 but using pip as the doc
build doesn't use the docker image.
The main reason for increasing CMake version is better toolchain
support.
The decision to bump the CMake version was taken by the Toolchain WG.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update west.yml to get fix to include building fsl_common_arm.c as
its needed by part of the HAL. (Watchdog driver fails to build
without this).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reduce the Rx window swithch overhead for continuous scan by
using radio interfae `radio_tmr_start_now` that accounts for
any minimum ticker offset requirement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the radio software switch from Rx to Tx when in
passive scanning, as there is no transmission requirement
after reception of a PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The log level was always set to debug. Defining BT_DBG_ENABLED same
as for other bluetooth files allows to switch off debug log messages.
Signed-off-by: Martin Jäger <martin@libre.solar>
The current code uses dev->data for finding back the instance data
structure in various places, but for the dio1 irq callback, dev refers
to the GPIO device node (not the LORA radio one), so dev->data returns a
pointer to the GPIO data rather than a "struct sx126x_data".
Fix that by using CONTAINER_OF to find back the correct structure from
the callback pointer.
The bug was introduced in:
74efaa920a drivers: sx126x: refactor few functions for stm32wl support
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
LOG_INF: It's meant to write generic user oriented messages.
LOG_DBG: It's meant to write developer oriented information.
use LOG_DBG instead of LOG_INF to hide debug message.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The qspi-nor flash is enabled.
Can be tested with e.g. drivers/spi_flash sample
Missing documentation of support of SPI and I2C added
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Add sifive-e24 cpu binding. This introduce riscv,cpu binding to
be used as riscv cpu base and riscv,sifive, which define specific
properties for this vendor. Both are necessary to create the e24
core.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit updates the MPS3 AN547 SoC configuration to enable the FPU
as well as the DSP and MVE extensions.
Note that the CPU0 of the SSE-300 (and AN547) supports all of the
extensions mentioned above (as for MVE, it supports both MVE-I and
MVE-F).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the ARMv8.1-M M-Profile Vector Extension (MVE)
configurations as well as the compiler flags to enable it.
The M-Profile Vector Extension consists of the MVE-I and MVE-F
instruction sets which are integer and floating-point vector
instruction sets, respectively.
The MVE-I instruction set is a superset of the ARM DSP instruction
set (ARMv7E-M) and therefore depends on ARMV8_M_DSP, and the MVE-F
instruction set is a superset of the ARM MVE-I instruction set and
therefore depends on ARMV8_1_M_MVEI.
The SoCs that implement the MVE instruction set should select the
following configurations:
select ARMV8_M_DSP
select ARMV8_1_M_MVEI
select ARMV8_1_M_MVEF (if floating-point MVE is supported)
The GCC compiler flags for the MVE instruction set are specified
through the `-mcpu` flag.
In case of the Cortex-M55 (the only supported processor type for
ARMv8.1-M at the time of writing), the `-mcpu=cortex-m55` flag, by
default, enables all the supported extensions which are DSP, MVE-I and
MVE-F.
The extensions that are not supported can be specified by appending
`+no(ext)` to the `-mcpu=cortex-m55` flag:
-mcpu=cortex-m55 Cortex-M55 with DSP + MVE-I + MVE-F
-mcpu=cortex-m55+nomve.fp Cortex-M55 with DSP + MVE-I
-mcpu=cortex-m55+nomve Cortex-M55 with DSP
-mcpu=cortex-m55+nodsp Cortex-M55 without any extensions
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit disables the Cortex-M null pointer detection feature for
the QEMU mps3_an547 targets because QEMU permits bus access to the
unmapped 0x0-0x400 region used by the MPU-based null pointer detection
feature.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Now that SDK 0.13.0 is out we can enable QEMU support on the
MPS3-AN547 to get coverage on Cortex-M55.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The current riscv linker script don't have sections for
Data & Instruction Tightly Coupled Memory. Add itcm and
dtcm sections to make it available. All sections were
8 byte align to keep compatible with rv64 SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Updating to the SDK 2.10.0 for select platforms.
west.yml:
- Update to point to the NXP HAL update with SDK 2.10.0 files
- modules/tee/tfm needed to be updated to synchronize the
LPCXPRESSO55S69 platform SDK to version 2.10.0 to be in sync
with Zephyr usage of SDK 2.10.0
drivers/counter/counter_mcux_pit.c:
- underlying SDK 2.10.0 adjusted the setting by -1 so need
to adjust the reported value set by +1
drivers/ethernet/eth_mcux.c:
- SDK2.10 ethernet driver provided an assert test that highlighted
we were using the wrong clock source on various platforms.
drivers/memc/memc_mcux_flexspi.c:
- SDK2.10 added compile time conditional on whether a field was
defined for the flexspi configuration structure.
Signed-off-by: David Leach <david.leach@nxp.com>
The MWDT compiler can replace some code with call to builtin
functions. We can't rely on these functions presence if we
don't use MWDT libc.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
We don't need MWDT libc if we are using minimal one provided by
Zephyr. So let's avoid linking mwdt libc if CONFIG_MINIMAL_LIBC
is enabled.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Implement _istty hook as it is required for proper setup of
STDIN/STDOUT/STDERR buffering.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
MetaWare hostlink is a library of system calls for debugging.
We don't use in case of Zephyr, however we provide real system
calls implementations. Let's pass -Hhostlib= to MWDT linker to
eliminate the MetaWare hostlink library from linkage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Don't define clockid_t in Zephyr in case of ARC MWDT libc
is used as ARC MWDT libc provides clockid_t.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
MWDT provides paddr_t type and it conflicts witn Zephyr definition:
- Zephyr defines paddr_t as a uintptr_t
- MWDT defines paddr_t as a unsigned long
This causes extra warnings. However we can safely define
paddr_t as a unsigned long for the case when MWDT toolchain is used as
they are both unsighned, have same size and aligning.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARC MWDT don't provide ssize_t type which is used in Zephyr.
Define ssize_t for ARC MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARC MWDT toolchain misses stdout hooks implementation and
itimerspec structure in timespec header. Let's add them in
arcmwdt compatibility layer.
The implementation was inspired by libc-hooks.c for NEWLIB.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add missing dts binding for sensor, this was causing build errors with
CONFIG_PM set on bt510/bt6x0 boards.
Fixes#37675
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds a devmem load command for shell that allows
users to easily load arbitrary data into the device memory.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
nucleo_l476rg:
adds tim3 with pwm on pb4, changes tim2 pwm pin from pa0 to pb10.
As a result timers are available on arduino pins D5 and D6.
nucleo_wb55rg:
adds tim1 with pwm on pa8, changes tim2 pwm pin from pa0 to pa15.
As a result timers are available on arduino pins D5 and D6.
Use default prescaler (==1) for 32-bit timer and
10.001 for 16-bit timers, as these are commonly used.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
nucleo_g0b1re:
removes spi2 from arduino header pins to ST morpho pins in order to
free pins for other peripherals.
Adds tim15 with pwm on pb14, changes tim3 pwm to pb4.
As a result timers are available on arduino pins D5 and D6.
nucleo g474re:
Adds timer 3 with pwm pin on pb4 and changes tim2 pwm pin
from pa5 to pb10.
As a result timers are available on arduino pins D5 and D6.
Use default prescaler (==1) for 32-bit timer and
10.001 for 16-bit timers as these are commonly used.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The new JIT scheduler does not have slot reservation, which means that
the ticker extension feature for automatically re-scheduling a colliding
non-anchored event, e.g. ADV, cannot be used.
This implementaion reacts to ADV envent done with result ABORTED or
TOO_LATE, and in those cases attempts to re-schedule the ADV event again
within the 10 ms pertubation window.
As the original scheduling, the re-scheduling is randomized, so there
is no absolute predictability as to how many attempts will be made. The
advertiser will attempt with randomly delayed re-schdules until the
window is exhausted.
If re-scheduling is unsuccessful, the weight of the ADV event is
increased, improving it's chances of success in the next event.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix failure due to advertising report count being
incremented faster than the wait loop that had longer delay
compared to the received interval of the advertising report.
Fixes#37652.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
DT_PROP for a phandle property should return the node that phandle
points to (similar for DT_PROP_BY_IDX for phandles) and this wasn't
working as the define generator didn't create the proper defines for
phandle(s).
Fix the generator and add some tests to make sure this continues to
work correctly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch the actual API implementation to the external API and mark the
internal ones as __DEPRECATED_MACRO.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
we use flag 0 in osSignalWait function to wait for
any single signal flag, but with this 0 flag,
it won't clear thread signal results as expected,
we need to check whether signal flag is 0 firstly.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Max SPI chunk len was missing from the
implementation, causing SPI to hang up in some
conditions.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
bt_conn_cb section was added into common-rom.ld and
as current ESP has limited segment section number, it
needs to be moved out from there.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Change cdc_acm_poll_out to do the best to mimic behavior
of a hardware UART controller without flow control.
With this patch, if the USB subsystem is not ready,
no data is transfered to the buffer, that is, new character
is dropped. If the USB subsystem is ready and the buffer is full,
the first character from the tx_ringbuf is removed to
make room for the new character.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
add flow_ctrl filed and give it initialized value
based on hw_flow_control.
Initialize mcux lpuart based on flow_ctrl
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Currently, with EATT enabled, when bt_gatt_read is called with multiple
handles first it'll try to use gatt_read_mult_vl, and if it fails
gatt_read_mult will be used to try again. Add option to skip
the gatt_read_mult_vl and use gatt_read_mult right away. This is needed
by tests that expect BT_ATT_OP_READ_MULT_REQ but support variable
lenght, thus don't return BT_ATT_ERR_NOT_SUPPORTED.
Removed fallback from read multiple vl to read multiple on
BT_ATT_ERR_NOT_SUPPORTED error.
This was affecting:
GATT/CL/GAR/BV-05-C, GATT/CL/GAR/BI-18-C, GATT/CL/GAR/BI-19-C,
GATT/CL/GAR/BI-20-C, GATT/CL/GAR/BI-21-C, GATT/CL/GAR/BI-22-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Add the number of strdup buffers currently in use to the
`log strdup_utilization` shell command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This is the debugging tool of last resort for figuring out where a
devicetree macro went wrong, but it's very effective. Document how to
do it on GCC based toolchains.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit adds a high-level overview of Trusted Firmware-M,
describing the basic architecture and integration work with Zephyr.
Co-authored-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This introduces a new kconfig CONFIG_DISPLAY_INIT_PRIORITY
to specify the initialization priority for display devices.
Most of the display devices are using APPLICATION and
CONFIG_APPLICATION_INIT_PRIORITY which is not entirely
appropriate for devices. Due to linking order, the display
device may be initialized after application code at same
init level and priority. This results in the display device
not ready to be used for application code. So this kconfig
option allows the display devices to be initialized earlier
if needed.
For the drivers using CONFIG_APPLICATION_INIT_PRIORITY,
they have been changed to use CONFIG_DISPLAY_INIT_PRIORITY
instead.
Note that the default value for CONFIG_DISPLAY_INIT_PRIORITY
is the same as CONFIG_APPLICATION_INIT_PRIORITY at 90 to
avoid any functional changes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa XCC does not like C99 style declarations in for
loops.
Fixes: 268f9bf163 ("nuvoton: battery-backed ram")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Renames stm32g0 tim1 brk interrupt to brk_up_trg_com, such that the
naming aligns with stm32f0 series and drivers can find the interrupt
with a common name.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Fix the node rx memory pool corruption regression introduced
due to same peer connection being rejected.
Regression introduced in commit 30f260dfaa ("Bluetooth:
controller: Fix adv/scan context access post release").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a new radio event is scheduled with a relatively short
preempt timeout while there is already a started preempt
ticker, then stop the ticker, abort the previous event that
requested the preemption, and request to start ticker with
the new relatively short preempt timeout.
Fixes#30245.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When there are multiple events in prepare pipeline then fix
the implementation so that only one preempt ticker start
or stop operation is enqueued towards ticker_job for
processing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PSoC-6 have different priority bit masks for cortex-m0+ and cortex-m4.
M0: 0-3 (2 bits of NVIC prio, no prio reserved by the kernel)
M4: 0-6 (3 bits of NVIC prio, one level reserved by the kernel)
The current macro that gets priority level value from devicetree apply
same value from cortex-m4 on cortex-m0+. This add missing indirection
to get from intmux node the correct cortex-m0+ priority level value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a macro for encoding interrupt source information: GIRQ number,
GIRQ bit position, GIRQ aggregated NVIC connection, and source
direct NVIC connection.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add ADC driver version 2 for MEC172x using new in-tree headers
and device tree properties. Update the ADC shell for the new driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Introduce a new API to allow devices capable of wake up the system
register themselves was wake up sources. This permits applications to
select the most appropriate way to wake up the system when it is
suspended.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Just using a simple atomic for flags instead of using an array.
While is neat using ATOMIC_DEFINE for future proof. The reality is
that it brings some problem for the wakeup source implementation
that needs to statically initialize it during the device definition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update zephyr side to handle hal_nxp using cmake-ext/kconfig-ext. This
allows for having zephyr specific integration code live with the zephyr
source tree.
For now on the cmake side we just use add_subdirectory() of the hal_nxp
repo so the integration is effectively transparent.
For Kconfig we add a place holder Kconfig file since the hal_nxp repo
doesn't have any Kconfig files in it currently.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add config macro to set interrupt as level triggered for ARM CPUs
Merge all timer configures into one place, then no need to overwrite
hpet_timer_conf_get/set() functions in SoC layer
Make hpet_timer_comparator_set() as the only register access function
to implemented in the SoC layer
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
When transmitting a frame, inform the radio driver whether
security processing and/or header updates are needed or not.
When a frame was transmitted, inform back to OpenThread whether
the security procedure and/or header updates were completed for
the frame or not.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
According to Atmel SAM datasheet when writing data to the latch buffer
"32-bit words must be written continuously, in either ascending or
descending order. Writing the latch buffer in a random order is not
permitted." To enforce the requirement we need to call a memory barrier
instruction after copying every word of data to the latch buffer. In
the absensce of __DSB() call the ARM processor is free to change order
of AHB transfers. This has caused the driver to occasionally corrupt
data programmed in the flash.
Fixes#37515
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
As 0.13 SDK is available and used in upstream verification by
default we can allow Zephyr toolchain for ARCv3 64bit boards.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The file <board>.dts_compiled was made obsolete in 8d8b06978c.
<board>.dts_compiled contains only a reference to zephyr.dts.
Users interested in devicetree should be familiar with zephyr.dts,
therefore it's time to remove the unused <board>.dts_compiled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Description was falsely static that macros statically creates
the ring buffer objects. Clarify description since variables
are not static.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The psoc6 SoC has 2 cores, each with different allowed priority ranges:
CM0: 0-3 (2 bits of NVIC prio, no prio reserved by the kernel)
CM4: 0-6 (3 bits of NVIC prio, one level reserved by the kernel)
Since some of the peripherals are only available to the CM4, those
should be set to a priority that is actually valid for it. In this case
the lowest possible one is 6, so transition from 7 to 6.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is a follow-up to commit 954dfa755b.
Apply adjustments made in the i2s_api test to the i2s_speed one so that
it can also be executed successfully on the nRF DK boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If HCI LE Set Extended Advertising Enable command is sent
again for an advertising set while that set is enabled, then
any change to the random address shall take effect.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Test advertising re-enable to cover reset of event counter,
duration and the number of events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Permit enabling already enabled advertising. Enabling
advertising when it is already enabled can cause the
random address to change, as specified in the Bluetooth
Specifications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
By default ICMP desination unreachable error packets are generated when
input packets target ports that are not in a listening state. This not
only reveals the presence of the host on the network which may be
considered a security vulnerability depending on the application, it
also ends up triggering ARP lookups to respond to the sending host. With
a small ARP table and a network where there may be broadcast (or
multicast) service discovery traffic such as mDNS or uPnP, ARP table
thrashing can occur impacting network stack performance.
Signed-off-by: Berend Ozceri <berend@recogni.com>
add a config CONFIG_QEMU_UEFI_BOOT to indicate whether
the qemu will use UEFI bootable method;
add a new test "sample.basic.helloworld.uefi" to verify
UEFT bootable method on qemu_x86_64 platform.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
When enabling MSI & MSI-X, the code seemed to handle fallback to MSI
when MSI-X is not available, but the logic uses MSI-X even if not
available and the MSI path never gets used.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
When building on non-X86 platforms K_MEM_PERM_RW gets undefined.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Introduce a bugfix for CONFIG_OPENTHREAD_CUSTOM_PARAMETERS handling in
OpenThread build system integration for Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The latest MESH.TS 1.0.1.2 4.15.10 Appkey List Procedures
MESH/NODE/CFG/AKL/BI-04-C
Verify that the IUT can respond to an Config AppKey Add
message with NetKeyIndex and AppKeyIndex already stored.
6. Repeat step 1 with the same AppKey, the same
AppKeyIndex, but NetKeyIndex field set to 0x001.
7. The Lower Tester expects the IUT to respond
with an Config AppKey Status message with the
Status field set to 0x04 (Invalid NetKey) and
the NetKeyIndex and AppKeyIndex values equal to
those sent in step 5.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The function to execute shell commands: shell_execute_cmd will now
behave similarly to invoking command line commands.
I.e. after the command is executed the command buffer is cleared,
while the cursor is set to the initial position.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
I saw a user wondering what this is for and and where it comes from.
Provide a comment header with some explanation and a pointer to where
to find out more.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the missing resumption of connectable advertising and
release of received connection complete buffers from LLL
after detecting connection from same peer.
Relates to commit 010c5c2f20 ("Bluetooth: controller:
Ignore connections from same peer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Metaware assembler doesn't accept '@' symbol in the beginning
of symbol name like GNU does.
Drop excessive '@' for _curr_cpu symbol.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The constructors of static objects are stored in ".ctors"
section. In case of MWDT toolchain we have incompatible
".ctors" section format with GNU toolchain. So let's use
initialization code provided by MWDT instead of Zephyr one
in case of MWDT toolchain usage.
As it is done for GNU toolchain We call constructors of
static objects but we don't call destructors for them.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Convert ws2812 LED strip driver to `spi_dt_spec`. Also moves the init
function implementation outside the declaration macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert the at2x eeprom driver to `spi_dt_spec` and `i2c_dt_spec`.
I2C functions are not fully converted due to the non-standard addressing
scheme.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add sensor API hysteresis attribute. This attribute allows for
configuring trigger threshold hysteresis values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Microchip XEC has been using the standard NS16550 driver.
Using the standard NS16550 driver requires extra HW programming
for XEC UART in board level and did not support XEC GIRQ interrupt
programming. We add an XEC specific driver and remove UART specific
register programming from the board level and implement interrupt
support. Also, by implementing a SoC specific driver we can add
driver PM in the future.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This change adds support to the cc1352r_sensortag for the hdc2xxx
temperature and humidity sensor introduced independently in #36342.
Fixes#36410
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
To get confirmation this will work before I cut the release. That
pre-release is already available on PyPI.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a stopgap release meant to backport bug fixes and new features
while v0.12.0 is blocked.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The setup() method is trying to find the zephyr repository by name,
but it's not passing allow_paths=False to the west method it uses to
search.
That may lead to unpredictable results depending on what the current
working directory is in the calling environment.
For robustness, disallow paths and make sure we are only searching for
the zephyr project by name.
Add some more comments to explain what is going on and clean up the
empty string handling while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
To keep bisectability, cmake and west modifications
needs to be in sync.
cmake: update external project configuration
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Microchip XEC two custom DT properies girqs and pcrs cell sizes
are defined as constants. There is no need to replicate these
is the chip DTSI since the value cannot be changes. Fix the syntax
of the cell size constant to match the naming convention used
thoughout DT.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Figuring out what the lowest possible priority in platforms where
CONFIG_ZERO_LATENCY_IRQS is supported is not possible before the Kconfig
tree is built and resolved. In order to make the user's life easier,
abort the build if IRQ_CONNECT() is called with an invalid (i.e. too
low) priority.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Pull a new revision of the hal_ti module that uses dynamic interrupts
instead of build-time ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a check for the mandatory channel receive callback when the
application provides the L2CAP channel operations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
based on uart rom functions, also enable console driver
on top of this driver, which enables logging
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
This commit reworks nRF IEEE 802.15.4 temperature update module to save
resources, otherwise used to create thread, by using work queue.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
Add optional support for the DRDY/INT pin. This avoids waiting a fixed
time for the temperature and humidity conversion to finish.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Soft-reset the TI HDC20XX sensor during init to bring all registers in a
known and consistent state.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The temperature and humidity samples are 16 bits long and can therefore
fit in a uint16_t variable. This save 4 bytes of RAM.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds defines for ECC public keys, private keys, DH keys and key
coordinates. Replaces raw numbers throughout.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The ipm_stm32_hsem driver is a virtual mailbox based on STM32 HSEM.
Since we already have LL_HSEM(low-level HSEM) API on the hal_stm32
module, looks there is no need to implement a new HSEM driver.
But there are still have some limitations, the HSEMx interrupt is
not shareable. If another HSEM user wants to use the HSEMx interrupt,
the ipm_stm32_hsem mailbox needs to be disabled.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
Some STM32 SOC, like stm32h745 and stm32h747 doesn't have IPCC.
Provide a STM32 HSEM based ipm driver for these SOC.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
In order to use the newlib retagetable locking interface (for thread
safety), which requires the newlib multi-threading feature to be
enabled, the Zephyr SDK 0.13.0 or above must be used.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the tests for the newlib retargetable locking
interface, as well as the tests for the internal lock functions that
are supposed to internally invoke the retargetable locking interface.
All of these tests must pass when the toolchain newlib is compiled with
the `retargetable-locking` and `multithread` options, which are
required to ensure that the newlib is thread-safe, enabled. If the
toolchain newlib is compiled with either of these options disabled,
this test will fail.
This commit also adds the userspace testcases to ensure that the newlib
is thread-safe in the user mode.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `static` keyword to the test functions that are
not intended to be globally available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the newlib retargetable locking interface function
implementations in order to make newlib functions thread safe.
The newlib retargetable locking interface is internally called by the
standard C library functions provided by newlib to synchronise access
to the internal shared resources.
By default, the retargetable locking interface functions defined within
the newlib library are no-op. When multi-threading is enabled (i.e.
`CONFIG_MULTITHREADING=y`), the Zephyr-side retargetable locking
interface implementations override the default newlib implementation
and provide locking mechanism.
The retargetable locking interface may be called with either a static
(`__lock__...`) or a dynamic lock.
The static locks are statically allocated and initialised immediately
after kernel initialisation by `newlib_locks_prepare`.
The dynamic locks are allocated and de-allocated through the
`__retargetable_lock_init[_recursive]` and
`__retarget_lock_close_[recurisve]` functions as necessary by the
newlib functions. These locks are allocated in the newlib heap using
the `malloc` function when userspace is not enabled -- this is safe
because the internal multi-threaded malloc lock implementations
(`__malloc_lock` and `__malloc_unlock`) call the retargetable locking
interface with a static lock (`__lock__malloc_recursive_mutex`). When
userspace is enabled, the dynamic locks are allocated and freed through
`k_object_alloc` and `k_object_release`.
Note that the lock implementations used here are `k_mutex` and `k_sem`
instead of `sys_mutex` and `sys_sem` because the Zephyr kernel does not
currently support dynamic allocation of the latter. These locks should
be updated to use `sys_mutex` and `sys_sem` when the Zephyr becomes
capable of dynamically allocating them in the future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add tests to ensure that conversions remain linear for large time deltas
when no skew is present.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix conversion drifts for large deltas by only applying float
operations when the skew requires it. This helps because not all
integers are representable as floats, so large integers are
neccessarily quantised when performing float operations.
When required, floating-point operations are now performed on doubles
instead of floats.
Fixes#37263.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Make the `lora_recv` operation thread safe by copying memory directly
in the callback instead of deferring copying to the original caller.
To ensure pointer validity, this requires performing operations "inside"
the `modem_release` context.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Ensure that the modem is not asked to perform new operations before the
previous operation completes.
An atomic variable is used instead of a mutex as multiple threads need
to release the lock. A semaphore isn't used as there is no indication
whether `k_sem_give` gives the semaphore or not, which is required to
determine if `Radio.Sleep()` should be run.
`Radio.Sleep()` is only ever run by the context that successfully
releases the modem usage, to guard against double calls.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Transition the receive synchronisation method from a single driver
semaphore to a function specific k_poll_signal. This is required to
allow the modem to be released without introducing race conditions on
the signalling mechanism.
Without this change, the RX can either be signalled before the modem is
released, unblocking the calling thread before the modem is put back to
sleep, or after the modem is released, in which case a second thread
could start using the semaphore before the original thread is signalled.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If no packet was received in the provided timeout, manually transition
to sleep mode. If a packet was received, the rx_done callback
automatically transitions the modem to sleep.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The timeout parameter for `lora_recv` is no longer a millisecond value
but a standard `k_timeout_t` value.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove compilation warning about adv_sync_pdu_ad_data_set function
that is defined but not used.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Bluetooth host may request to send more than one CTE in
connectionless mode. That is relized by periodic advertising
chained PDUs.
To check correctness of implementation of such functionality
new unit tests were added.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding functionality allows to send a number of periodic
advertising PDUs in a chain that have CTE.
Disable sending CTE requiers additional steps while removing
cte_info from periodic advertising chains.
Removal of cte_info fields may be just delete of that filed
from extended advertising header. In case the PDUs are empty
PDUs created just to transport CTE. Those PDUs should be removed
from a periodic advertising chain.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add release of chained PDUs by lll_adv_pdu_and_extra_data_-
latest_get function. It is requier to release unused
PDUs from a chain to avoid PDUs leakage.
It maight happen when chained PDUs were used by Direction
Finding, then lll_adv_pdu_and_extra_data_lates_get is used
instead of lll_adv_pdu_lates_get.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To check if advertising PDU is empty we can compare its length to 1.
To avoid use of magic number, the commit provides a macro for that
purpose.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding functionality allows to send a number of periodic
advertising PDUs in a chain that have CTE.
ll_df_set_cl_cte_tx_enable function was changed to update periodic
advertising chain to include cte_info field. If the chain is too short,
there is less PDUs in the chain than requested number of CTEs,
the function will add new empty PDUs to the chain end.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enabling or disabling transmission of Constant Tone Extension with
periodic advertising PDUs requires update of a PDU content.
CTE_INFO field of periodic advertising PDU must be filled with
appropriate data. That operation may be done for periodic
advertising PDU (or chain of PDUs) filled with other payload that
wasn't enqueued towards LLL. In that situation PDUs are updated
in place, to avoid increase of memory consumption.
The commit changes ull_adv_sync_pdu_set_clear function to
make possible update of the advertising PDU in place.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Some functions, provided to handle changing content of periodic
advertising PDUs, were defined as static.
Code responsible for handling direction finding updates periodic
advertising PDUs also. For that purposes, those functions were mede
globally accessible.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add configuration of CTE for periodic advertising chain transmission.
The commit provides configuration of radio in prepare stage and
in handle of Tx ISR. CTE is configured only for PDUs that
have cte_info field in extended advertising header.
During prepare of periodic advertising event there are updated
aux_ptr fields in extended advertising header in other PDUs from
a periodic advertising chain. aux_ptr offset value also depends
on CTE length. CTE configuration is always the same for every
PDU in periodic advertising chain.
CTE may be added to requested number of PDUs in periodic
advertising chain. Although it is possible that there are PDUs
that don't have CTE. PDUs that have CTE are alsways at the beginning
of a periodic advertising chain.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Configuration of CTE for transmission is stored in extra_date member
of a lll_adv_sync object. PDUs in periodic advertising chain share the
same CTE configuration, so there is single instance of the extra_data.
To configure CTE transmission for every PDU in periodic advertising
chain a new function was introduced to peek extra_data instance without
peeking new PDU.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Transmission of Constant Tone Extension is done after END event
triggered by radio. To correctly switch from TX to TX (back 2 back
TX) after transmission of CTE PHYEND event must be used instead of
END event.
The commit provides required function that allows LLL to correctly
setup radio to do back to back switch of TX when CTE transmission
is enabled.
The radio_switch_complete_and_phy_end_b2b_tx cannot be implemented
in radio.c source file. It will fail build of unit tests targeted
for NRFBSIM simulator board. There is no RADIO_SHORTS_PHYEND_DISABLE_Msk
macro defined in bsim_hw_models module.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Amount of memory allocated for advertising PDUs (including
periodic advertising) depends on two factors:
- maximum advertising data length
- maximum number of CTE in a periodic advertising chain.
Maximum advertising data length is divided by maximum size
of a single fragment (number of payload bytes that single
advertising PDU may hold) to get required number of fragments.
Actual number of PDUs allocated for advertising is maximum
of acutal number of advertising payload fragments and maximum
number of CTEs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add possiblity to configure maximum number of PDUs with Constant Tone
Extension in a single periodic advertising chain.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
We try to reduce the ambiguity between 'soc/nuvoton/' and
'soc/nuvoton_npcx' folders. Most if soc vendors name their soc folder by
the company name with SOC_FAMILY suffix instead of the company name
directly. It is clearer if the soc company has different product lines
that aim to specific markets.
In this CL, the 'numicro' suffix is used for Nuvoton Microcontroller
production line. It distinguishes the 'npcx' suffix that used for
Nuvoton Embedded Controller (EC) of Notebook PC product line.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL renames 'Nuvoton Platform' as 'Nuvoton_NPCX Platform' and
modifies the relevant files used by this platform. It also changes
status from 'orphaned' to 'maintained' since we do maintain npcx drivers
continuously.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This allows board to re-configure ROM_BASE address while building
firmware image.
For example, a board need to build two firmware images. And the images
are put into one flash and required to work independent:
config FLASH_LOAD_OFFSET
default 0 if FIRST_IMAGE
default 0x80000 if SECOND_IMAGE
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
ARCv3 has ARConnect implementation similar to ARCv2, so
use existing ARConnect header for ARCv3 as well.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Current location options for linker source files includes init and
noinit ram data, but only a noinit ram section. This makes it impossible
for application code to define an initialized RAM output section,
such as with the Z_ITERABLE_SECTION_RAM() helpers.
Adding a DATA_SECTIONS linker source option for this use case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fixes issue 34879
This PR updates previous PR's 37138 and 37139.
Refer to issue 34879 for information from MCHP HW
designers. A delay after enabling interrupts is a
more appropriate work-around than depending upon
behavior of ARM DMB instruction.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The main motivation is to avoid polluting the all-caps "DT_"
namespace, which within zephyr belongs to devicetree.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Socket CAN does not require interface link address to be
assigned, check is not applicable for socket CAN
interfaces. As this address is NULL for socket CAN interface
it results in assertion.
Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com>
Use the internal function z_device_get_all_static helper function
instead of using __device_start and __device_end directly. Some other
minor adjustments have been done (e.g. reduce *dev scope to the for
loop). An issue on the range of the for loop in _pm_devices has also
been fixed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The shared _pm_devices function used should_suspend check function to
see if a device had to be suspended or not. Some of the logic inside
that function was redundant since the pm_device_state_set function
already performs similar checks, e.g. if the device is already at the
given state or the state transition is not supported it will return
error codes appropriately.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A device that is turned off should not be suspended. A device that has
been turned off can only be resumed. This action is currently forbidden
by the "should_suspend" function in the device PM code.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
esp32c3 SoC is an rv32imc, so it does not support the atomic builtin.
Since it relies in atomic instructions.
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Some boards, e.g. atsamd20_xpro, enable non-minimal peripherals by
default like SPI. This goes against board porting guidelines, as it
enables a peripheral that is not necessarily used by all samples,
as discussed at #30694. This removes SPI as a default peripheral
for all sam/sam0 boards.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
RT platforms that support TRNG IP (rt10xx and rt6xx) need to set
RNG and CSRNG to Xoroshiro and CTR_DRBG respectively instead of
using TRNG as random source.
Fixes: #37307
Signed-off-by: David Leach <david.leach@nxp.com>
Using the NOP instructions to do timing control on some physical board
such as ehl_crb, up_squared and intel adsp board, that doesn't work.
It seems like it can only be used for instruction alignment purposes.
We skip this test on this board because it's not meaningful.
Fixes#35971
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
k_timeout_t was converted to ticks using a nonsense function
causing poll timeout corruption for offloaded sockets; this
commit uses ticks directly from the struct instead.
Fixes#37472
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
According to MbedTLS API documentation, its session must be
reset if mbedtls_ssl_handshake returns timeout error. This
commit resets the session for said return value, and that
allows us to call send() multiple times even if handshake
times out for previous calls.
Fixes#35711
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
This is a follow-up to commit 3656ba5ae9.
Enable pull-up resistors on UART pins RXD and CTS in Nordic DK boards
where it is possible that these pins are not connected to anything on
the board and could generate problems if left floating (on some DKs
also the Interface MCU can be disconnected with the switch "nRF only",
hence pull-ups enabled also on uart0 for them).
Those pull-ups can still be disabled (by deleting the added properties)
if necessary to use a given board in some specific hardware setup.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 3656ba5ae9.
Do not enforce pull-up resistors to be enabled on RXD and CTS pins
in nRF UART drivers, as in certain hardware designs this may be
undesirable or may even make certain hardware not working.
Instead, provide devicetree properties that allow enabling of those
resistors when it is actually needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Document the new DT_FOREACH_OKAY_INST_<compat> and
DT_FOREACH_OKAY_INST_VARGS_<compat> macros that are generated by
gen_defines.py and explain how they are used in devicetree.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add two new for-each macros:
- DT_FOREACH_STATUS_OKAY(compat, fn)
- DT_FOREACH_STATUS_OKAY_VARGS(compat, fn, ...)
These can be used to expand "fn" once for every status "okay" node in
the devicetree which has a given compatible. The intended use case is
to allow doing something in C once for each node of a compatible,
but outside of a device driver.
E.g. an application might want to collect an array of structures for a
compatible, where each structure is initialized from a node.
In such cases we don't want people to be forced into using
DT_DRV_COMPAT and instance numbers, because that's in general a hint
that you're doing something driver-like.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add some helper macros that work similarly to the
'DT_FOREACH_OKAY_INST_<compat>(fn)' macros, except they give 'fn'
node identifiers in their expansion instead of instance numbers.
This makes it possible to add for-each APIs to devicetree.h that work
on an arbitrary compatible, not just DT_DRV_COMPAT.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Split the generic tests for DT_INST_FOREACH_STATUS_OKAY() out of the
function which tests it as applied to device instantiation.
This is just moving code around as prep work for expanding on the set
of macros which are in for-each-node style.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The commit
6fe9e408ab (tests/cbprintf_fp: Filter on CONSOLE_HAS_DRIVER)
added filtering on Kconfig symbol incorrectly - it checked
CONSOLE_HAS_DRIVER instead CONFIG_CONSOLE_HAS_DRIVER so
this test was filtered out (and therefore skipped) on all
platforms.
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
We had added a break in a switch statement that stopped
ISO channels from setting the BT_CONN_CLEANUP flag
which in turn stopped them from disconnecting (in the
eyes of the upper layers) properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of just writing "err" we make it clear that it is
the ISO server that failed to accept.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
GATT/SR/GAD/BV-03-C will read attr value, but we parse NULL
from `attr->read` which point to `attr_read` function.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Driver's RX thread can wait some time before a free buffer is available.
When resources are limited we can easily run out of them.
Fixes#36891.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Modified test to handle case when counter handlers are called in
ZLI interrupt context where kernel primitives cannot be used. In
that case volatile counters are used to track number of handlers
calls.
Added configuration for nrf52840dk board where zli feature is enabled
for all counters.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended driver configuration in device tree to enable ZLI interrupt.
When zli is set in the device tree then event handlers for alarm and
top is called in ZLI interrupt context. It means that kernel primitives
cannot be used there.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended driver configuration in device tree to enable ZLI interrupt.
When zli is set in the device tree then event handlers for alarm and
top is called in ZLI interrupt context. It means that kernel primitives
cannot be used there.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add missing otPlatTimeGet implementation which is needed for proper
calculation the time offset in host-RCP communication.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The filter_py() function is handed a bunch of file names and is
expected to give back just the python files.
Its input is the output from a 'git diff' command which normally when
used in the vanilla zephyr repository just prints regular files.
In situations where we're checking compliance on a repository with
submodules, however, filter_py() can be given directories in the
'fnames' list from the git output.
In the interests of being defensive and sharing infrastructure, just
handle this case in filter_py().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixup the doxygen comments for return values on `_dt` functions.
@retval should only be used when specifying actual return values,
@return is more general and can refer to other functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
With the last changes in USB device stack it was unfortunately
not considered that an interface can have no endpoints.
This caused the USB DFU class to stop working in DFU mode.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Before entering initialization mode, we left sleep mode, then request
to leave again sleep mode before returning from can_stm32_init() is
useless.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Disabling the time-triggered communication mode (TTCM) is done twice in
the setting of the master control register (MCR). So, let's remove the
second.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
The driver only support use case where the channels are used in mutual
exclusion.
Origin: Original
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
This guideline seems to be missed during the Zephyr's code guideline
creation. That is a good guideline that aims to address some problems
like double free or freeing not allocated memory.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This guideline address three undefined behaviors listed in the C99
standard. Although Zephyr does not support/implement these functions,
they are part of the C library and could be implemented in the future.
Also this is mandatory rule in MISRA-C and if one day Zephyr decides to
claim compliance with MISRA-C this guideline has to be followed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The addition of image number parsing, in mcumgr library, requires
increase in the stack size for the smp_svr to work.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds chapter, to the documentation, that explains
how to select target image to upload, and how does the image number
maps to the DTS image defintion and the slot number.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Commits affecting Zephyr that are included with the new revision:
4fa8691 zephyr: Allow to select slot for DFU as image
d8802de samples/smp_svr/zephyr: Update stack size
e71063a zephyr: Improve and rename img_mgmt_find_best_area_id
e215d26 zephyr: Check area id in erase slot processing
71c76f5 zephyr: Upload should use g_img_mgmt_state
afa95ba cmd/img_mgmt: Call dfu stop cb on erase
6a10fa6 img_mgmt: Add interpretation of "image" parameter
757965c samples: smp_svr: zephyr: Update MTU Kconfig values
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add implementation to resume primary PDU scanning window
after use of LLL scheduling to receive auxiliary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Auxiliary PDUs are scanning by the primary scan's LLL
scheduling, then flush the Auxiliary PDUs when processing
them in the ULL instead of using the disabled callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This can be used to check if pointer is a valid lll_scan_aux pointer,
e.g. if we need to decide what kind of struct is attached to RX node
for further processing.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to reset isr status before returning as otherwise irq will be
triggered over and over again.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for issue 34879.
Microchip MEC GPIO hardware can trigger a spurious interrupt when
interrupt detection is set to edge mode especially falling edge mode.
Clearing the status immediately after enabling interrupt detection does
not work because the hardware takes a small number of AHB clocks to
set the status. After interrupt detection enable we use an ARM data
memory barrier to insure the write completes before clearing spurious
status and enabling the interrupt in the GIRQ.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Fix potential bug when returning error codes not handled by
OpenThread in `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix bug in adv timeout for limited advertiser when extended advertising
features has been enabled. The advertiser was only stopped when
configured as an extended advertiser. It should be stopped when
configured as a legacy advertiser also.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate the xoroshiro128+ PRNG algorithm in favour of xoshiro128++.
xoshiro128++ is a drop-in replacement which is invisible from the user
perspective.
xoroshiro128+ is unsuitable because it is explicitly a floating-point
PRNG, not a general-purpose PRNG. This means that the lower 4 bits of
the output are actually linear, not random (from the designers,
https://prng.di.unimi.it/). This means 1/8th of the generated data is
not random.
Additionally, xoroshiro128+ is not a 32bit algorithm, it operates on
64bit numbers. For the vast majority of Zephyr devices, this makes the
PRNG slower than it needs to be. The replacement (xoshiro128++) is
32bit, with no loss in state space (still 128 bit).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds an implementation of xoshiro128++ as a pseudo random number
generator from https://prng.di.unimi.it/ that operates on 32bit words.
The algorithm postfix signifies the main operation in the generation
function. Therefore xoshiro++ is chosen over xoshiro** as we would
prefer to do 2 additions isntead of 2 multiplications on embedded
hardware. The quality of the generators appears to be the same in all
other respects.
xoshiro+ is not chosen despite being faster as it generates random
floating-point values, not general purpose random values (The lower 4
bits are linear).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit adds flash driver in non-secure mode for stm32l5x
series with icache enabled. This commit also adds a flash
programming error status check applicable for all platforms
except stm32f1 series.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
ZFD_IOCTL_POLL_OFFLOAD operation needed special handling, as it needed
to modify the fds table for the offloaded implementation, overwriting
websocket file descriptors with the underlying offloaded ones. This is
only needed for the offloaded sockets, as the native implmentation use
POLL_PREPARE/UPDATE operations instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The websocket implementation of ioctl wrongly passed websocket context
to the undrelying `ioctl` implementation instead of the context of the
underlying socket.
Additionally, currentl implementation used the vtable of the native
socket implementation unconditionally, making it unusable with an
offloaded underlying socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for FORCE_SUSPEND and LOW_POWER actions. Even though these
actions have no clear meaning, they are added for compatibility until
their associated states are discussed. Their usage in new code should be
discouraged until the associated states are clarified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If a device does not support, for example, the suspend action the
subsystem should just ignore the device.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a type and documentation for the device PM control callback. This
way possible return codes and its meaning are documented.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to the documentation the OFF state has to be used when the
devices is fully turned off, ie, power removed. Most drivers were using
a sort of fall-through for all non-active states, leading to behaviors
not following the specifications.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The difference between low power and suspend states is a thin blur line
that is is not clear and most drivers have used indistinctly. This patch
converges to the usage of the suspend state for low power, since
contrary to the low power state, it is used by both system and runtime
device PM. The low power state is still kept, but its future is unclear
and needs some discussion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some devices are using PM_DEVICE_STATE_FORCE_SUSPEND as a sort of low
power state, something that is not correct. In fact, this state is not
an actual state and will be eventually moved, if found necessary, to an
action or command.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM control function will only be called if the requested
state is different from the current one. A significant amount of drivers
were checking for state changes, now unnecessary. This patch removes all
this redundant logic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If the device is already at the given state, do not call the device PM
control function. This makes sure that devices are only called to change
from one state to another.
Even though asynchronous device PM is completely broken, transitional
states are considered too.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Improve the docstrings of the pm_device_state_set function and change to
shorter argument variable names.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the received Extended Advertising PDU's address
resolution latency due to missing reset of pending IRQ in
the NVIC which caused the wait loop from not exit correctly.
Fixes#30243.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When generating LE Extended Advertising Report the device
address can be either in primary or auxiliary channel PDU,
do not overwrite resolving list index if present in primary
channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup standard device request handler.
Pass pointer to setup packet as argument where
it is reasonable.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Cleanup standard device request handler.
Pass pointer to setup packet as argument where
it is reasonable.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The sample only supports device-to-host control requests.
Return -ENOTSUP on host-to-device control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This class does not handle any vendor request,
therefore just return -ENOTSUP on any vendor request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HCI commands are always directed to controller and should be
host-to-device class control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Return ENOTSUP if request is unsupported and pass on the error
from encapsulated command/response functions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Control request handler from CDC ECM implementation does not
care at all about returning errors when a request is not supported.
Return EINVAL/ENOTSUP if request is incorrect/unsupported.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Set data stage length variable to zero as a precaution
so that no trouble happens if control request handler
does not check the request values sufficiently.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add variants of all i2c transfer functions that accept an `i2c_dt_spec`
as the bus specifier. This helps reduce code duplication in device
drivers.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Introduces the `struct i2c_dt_spec` type, which contains the complete
I2c bus information derived from devicetree. It serves the same purpose
as `struct spi_dt_spec` in that it can be constructed automatically in
`DEVICE_DT_INST_DEFINE` macros and provided as a single handle to I2C
API calls. While I2C has much less instance configuration than SPI, this
is still useful to enable the following pattern in device drivers that
support both I2C and SPI comms:
```
struct config {
union {
struct spi_dt_spec spi;
struct i2c_dt_spec i2c;
};
};
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the Microchip XEC pinmux driver to use system I/O
routine for read/write of registers instead of direct use
of volatile and CMSIS defines. Add GPIO port number to
bindings instead of using hard coded value from chip headers.
Modify SoC DTSI pinmux syntax, requires "pinmux: pinumx {..."
or the DT macros will not work. Since pinmux is used by MEC152x
we update its chip pinmux DT.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add support for TI TLC59108 an I2C 8-bit LED driver.
Supported blinkink period: 41ms to 10730ms
Supported brightness value: 0 to 100%
This driver supports the following APIs:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
This is a modified version of the NXP PCA9633 driver.
Signed-off-by: John Kjellberg <kjellberg.john@gmail.com>
Redefine the APIs used to deal with iterable sections to an alias
without the Z_ prefix, so that they can be used by Zephyr applications.
Fix the associated comments so that they are handled correctly by
Doxygen.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Linker APIs are defined in a "#ifdef _LINKER" block. Adding _LINKER to
the Doxygen PREDEFINED list so that they get picked up when generating
the documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It is enough to set the USB_DEVICE_STACK option to enable
USB device support.
Remove USB_DC_STM32 for mikroe_mini_m4_for_stm32 board
since it is already selected on SoC level.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
It is enough to set the USB_DEVICE_STACK option to enable
USB device support. Also the option USB_NRFX is not necessary
here because it is selected in drivers/usb/device/Kconfig anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The USB option alone only caused the driver to be built
and actually has no benefit. Remove it from *_defconfig files.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace USB configuration option with USB_DEVICE_DRIVER
since on the SoC level the specific driver is selected.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The USB configuration option is actually a global switch
to enable USB drivers in general, but currently only
the device controller drivers are meant.
USB device controller drivers also have USB_DEVICE_DRIVER option.
Thus the option USB is actually redundant and can be replaced
by the self-explanatory option USB_DEVICE_DRIVER.
The name USB itself is not unique and should not be used as an
configuration option.
With these changes the option USB_DEVICE_DRIVER generally
enables USB device controller drivers. The option USB_DEVICE_STACK
enables USB device support. It is sufficient to enable only option
USB_DEVICE_STACK because it selects USB_DEVICE_DRIVER.
CONFIG_USB Kconfig option is temporary added to subsys/usb/Kconfig.
This is necessary to pass CI and will be removed again
when the USB configuration has been adapted in modules.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Test for dropping log messages was expecting certain number of
dropped messages assuming that buffer size is dividable by the
message size. That was not the case when timestamp was 64 bit.
In that case, additional message is dropped.
Modified the test to take that into account.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is mainly for testing purposes where logging is multiple times
reinitialized.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Create a "global" gen_defines.py option and edtlib.EDT constructor
kwarg that turns edtlib-specific warnings into errors. This applies to
edtlib-specific warnings only. Warnings that are just dupes of dtc
warnings are not affected.
Use it from twister to increase DT testing coverage in upstream zephyr.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
An unknown vendor prefix is now a warning. We augment the list of
vendor prefixes passed by the user with a grandfathered-in bunch from
Linux.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use a comment syntax instead of a separator. This is a bit cleaner
and is prep work for moving the parsing code to a more generic place,
namely edtlib.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update our vendor-prefixes.txt file to match the data in upstream
Linux's vendor-prefixes.yaml file as of Linux commit
8ac91e6c6033ebc12c5c1e4aa171b81a662bd70f.
(We can't easily switch to using the Linux YAML file directly because
our documentation tooling depends on this plain text format.)
The changes were done using a script and then cleaned up by hand in
order to not throw away any Zephyr-only prefixes, and to manually
override Linux in some cases.
List of Zephyr-only prefixes, all of which were kept:
asmedia
cadence
gaisler
lairdconnect
ovti
openisa
particle
quicklogic
ruuvi
segger
vnd
weact
zephyr
Other things to note:
- keep Espressif as 'espressif', overriding Linux's 'esp'
- 'gw' is deprecated in Linux and is unused here; just remove it
- ROCKTECH DISPLAYS LIMITED SHOULD HAVE BEEN ALL CAPS;
HOW COULD WE POSSIBLY HAVE MISSED THIS BEFORE?
- Did not include '70mai' from upstream, as that violates the legal
compatible regexp
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix key distribution not calling pairing complete callback when
distributing encryption information when not bonding.
Encryption information is only distributed in legacy pairing so issue
was only seen during legacy pairing.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
based on uart rom functions, also enable console driver
on top if this driver enabling logging
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Handle serial numbers provided from the command-line instead of forcing
the user to provide 'tool-opt' manually.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The LL_ADC_ConfigOverSamplingRatioShift function for
the stm32H7xx soc serie differs from other for the 'ratio':
"This parameter can be in the range from 1 to 1024"
Note that in the stm32h7xx_ll_adc.c the LL_ADC_OVS_RATIO_xxx value is
defined for ADC of type ADC_VER_V5_V90.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A mutex is used to syncrhonize the start, stop and service() functions
of the RD client. Previously it could happen that while service() was
working on e.g. bootstrapping, a stop() call by another thread would
close the socket. Then the bootstrapping process would detect it as a
network error, and restart the process.
Fixes#37170.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
The existing extension tree does not support all the features that are
defined by the specification (e.g. multiple parents).
This patch approaches this problem by defining a circular single-linked
list of extension models. So for a given model, all models that are on
the same list as that model are in some extension relationship with that
model. All models on a list represent a single connected component of an
extension graph but without defining specific relationships between each
pair of models. This list is used to manage a shared subscription list
as per the Mesh Profile Specification:
```4.2.4 Subscription List
Within an element, each model has a separate instance of a Subscription
List, unless the model extends another model on that element. Instances
of models that extend other models (i.e., all models within an extension
relation tree) shall share a single instance of a Subscription List per
element.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The host interface type (eSPI/SHI) is selected via HIF_TYP_SEL field in
DEVCNT register. This commit adds a function to set it.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The booter (bootloader) behavior may be different in different NPCX
chip series. One example is that the booter sets host interface type in
NPCX7 series but leave the firmware to set it in NPCX9 series.
This commit adds a new DT node to record variants in its properties.
NPCX drivers can understand if they need to configure the related
setting by checking the node's properties.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Current default serial port used for flashing is
/dev/ttyUSB0. This changes that to automatically detect the device
serial port or uses the one exported to the environment.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The Bluetooth Core spec 5.2 requires to provide CTE type in
periodic advertising report.
The implementation of le_per_adv_sync_report assigned
value zero to be default CTE type. The assigned value
in Bluetooth Core spec 5.2 means "AoA Constant Tone
Extension". In case there is no CTE attached to periodic
advertising PDU, CTE type should contain value 0xFF.
This commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix compilation warning in hci_df_set_cl_cte_rx_enable function.
The struct bt_hci_cp_le_set_cl_cte_sampling_enable *cp variable
was used just to evaluate size in bt_hci_cmd_create call.
The variable is moved to prepare_cte_rx_enable_cmd_params
function and size of the buf is evaluated directly from type.
Code is simpler and prepare_cte_rx_enable_cmd_params does not
require passing additional argument.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Zephyr is now able to convert ELF binary to the EFI application for
launching directly from the EFI firmware. The bootloader is not needed
and the information about grub was removed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since Zephyr supports EATT, which is reflected in ICS GATT_2_3
(Enhanced ATT bearer Attribute Protocol Supported (L2CAP fixed EATT PSM
supported) and GATT_2_3a (Enhanced ATT bearer supported over LE)
in GATT tests preamble 4.2.1.4 (Setup EATT Bearer over LE) is used
instead of 4.2.1.2 (Setup ATT Bearer over LE). Let's enable
EATT by default, allowing to run almost all GATT tests without
additional overlay.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The _value in BT_GATT_ATTRIBUTE was misleading as
it cannot be generically used a attribute value,
and actually is a user_data pointer.
The macros BT_GATT_CPF, BT_GATT_CEP and BT_GATT_CUD was
also update to more accurate describe the expected
type of value for the macros.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update doxygen usage of `@retval` to specify the value for each case,
instead of a chain of logic from the one `@retval`.
https://www.doxygen.nl/manual/commands.html#cmdretval
Convert `@retval`'s that simply reference another function to `@return`.
Convert some custom notes to `@note`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The default CONFIG_APIC_TIMER_IRQ_PRIORITY is 4, but it should be 1 for
ACRN. That's why the testcase failed due to no timer interrupt was
triggered.
And we also temporary adjust the testing IRQ for dynamic isr due to it
conflict with the IRQ of the APIC TSC deadline TIMER.
Fixes#36203.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
for up_squared board, we already support to use UEFI bootable
method to run zephyr tests, so update the document to use
this UEFI method, rather than legacy BIOS stuff.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Deprecate usb_common.h and usbstruct.h headers in 2.7 release.
Deprecate DESCRIPTOR_TYPE_BOS macro.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use macros and types from usb/usb_ch9.h header where it
is possible. This patch also adds local macros, USB_REQTYPE_GET_DIR
and USB_REQTYPE_GET_TYPE, which is an intermediate solution and
these will be removed later.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add header file where all defines and structures
from Chapter 9 (USB Device Framework) should be included.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
It is desirable to have the read and write like functions follow the
POSIX read and write parameter types.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
There were missing calls to periodic advertising functions:
lll_adv_sync_init() and lll_adv_sync_reset() corresponding
functions in lll_adv.c.
Lack of those calls didn't introduce any harm.
I've added them to have complete init and reset patch,
similar to extended advertising implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There is missing handling of periodic advertising reset for
HCI_Reset command. That makes impossible to execute e.g.
qualification tests without rebooting of the DUT
for periodic advertising and direction finding.
This commit adds missing implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Extends memory footprint tracking to include echo_client and echo_server
networking samples on the frdm_k64f board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The commit moves definition of Zephyr specific mcumgr basic group to
PERUSER - 1. This has been done to avoid collision with application
specific groups, defined by users.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
There is no need to include nrf_clock_control.h so remove it as
this fixes a build issue when trying to compile this sample on
litex_vexriscv.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
dtc v1.6.1 produces an error without specifying #address-cells
on an interrupt-controller node.
Fixes#36495
Signed-off-by: Eric Johnson <eric@liveathos.com>
Add watchdog support to the mimxrt685 platform.
The mimxrt685 platform is excluded from the watchdog
test case because the test case uses variables in the
noinit section that need to be retained through a reset
but the rt685 does not retain this memory through a
reset.
Signed-off-by: David Leach <david.leach@nxp.com>
* Move definition of flexspi_nor_config_t into soc/ dir so it can
be shared by all i.MX RT based boards.
* Use Kconfig symbol CONFIG_NXP_IMX_RT_BOOT_HEADER instead of
HAL define (which is set based on the Kconfig symbol)
* Rename board files to flexspi_nor_config.c since they
are already namespaced by the board dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes an issue that surfaced with Zephyr v2.6.0,
where the GPIO driver has not completed initialization
when attempting to use it during POST_KERNEL with
KERNEL_INIT_PRIORITY_DEFAULT.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
When building tests/drivers/build_all/modem on native_posix_64 we get:
modem_cmd_handler.c:545:9: error: ret may be used
uninitialized in this function
[-Werror=maybe-uninitialized]
Fix by adding simple initialization of ret = 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make correction on the terms "intput" appearing
in sciripts/pylib/twister/twisterlib.py to "input" for all.
This type of misspellings may cause another unnoticeable misspellings,
when propagated by code completions.
(assuming that the "intput" was intended
to have the opposite meaning of "output",
which also appear on the same areas)
Signed-off-by: Kentaro Sugimoto <tarotene@gmail.com>
This commit extends size of stack used by IEEE 802.15.4 radio
temperature sensor. This commit fixes stack overflow issue in
echo_server sample for OpenThread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The Texas Instruments TCA9538 is an 8 pin GPIO port expander.
It operates on an I2C bus with 2 configurable address pins. The
device has an interrupt output pin that is asserted when any pin
configured as an input changes state.
Added under the PCA953X name to allow other similar parts to
use the same driver.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
The local function has been missing static specifier.
The commit also removes unused STORAGE_MGMT_ID_ERASE define.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
We cache the current thread ID in a thread-local variable
at thread entry, and have k_current_get() return that,
eliminating system call overhead for this API.
DL: changed _current to use z_current_get() as it is
being used during boot where TLS is not available.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The TLS global pointer is only set during context switch.
So for the first switch to main thread, the TLS pointer
is NULL which would cause access violation when trying
to access any thread local variables in main thread.
Fix it by setting it before going into main thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
After powering-on the sensor, and before every measurement, it loads
the NMV. We must wait until this process is completed otherwise
we will read weird values.
Since it was observed that the time may be a bit long after a cold
start, it is more convinient to just wait until the sensor iready,
without a timout.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
To ensure that we have the same behaviour with a power cycle
and by pressing the reset button, we can perform soft reset
in `bme280_chip_init()`.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
In the current code the naming of the
CONFIG_RPMSG_MULTI_INSTANCE_?_IPM_{TX,RX}_NAME symbol is 1-based. While
this is not currently an issue, it could easily become such if the
symbol is programmatically used as part of a preprocessor enumeration
(for example when using DT_INST_FOREACH_STATUS_OKAY(...) & co).
To avoid trouble, just make the index starting from 0 instead than 1.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a sample that shows how to use in Zephyr nRF peripherals that
share the same ID and base address. Such peripherals cannot be used
simultaneously, but it is possible to switch between them. However,
currently it is not possible with Zephyr APIs, only using nrfx drivers
directly. This sample shows how to realize such switching for selected
peripheral instances while using standard Zephyr drivers for others.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extract functions which are managing logging sources
and backends into separate file: log_mgmt.
So far those functions were in log_core mixed with functions
specific to log message creation and log processing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There was an issue with receiving CTE packets when the time
slot has changed from 2us to 1us. After receiving the packets
when it tries to enable receiving of CTE, the validator
returns EINVAL error.
Source of the problem is "validate_cte_rx_params" function,
it calls DF_AOA_RX_1US_SUPPORT(df_ant_info.switch_sample_rates)
which is expanded to:
((df_ant_info.switch_sample_rates) & BIT((BT_HCI_LE_1US_AOA_RX)))
And due to definition of BT_HCI_LE_1US_AOA_RX in hci.h it will be:
((df_ant_info.switch_sample_rates) & BIT(BIT(2)))
So the BIT operation has executed two times.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
Microchip MCP7940N is a Real-Time Clock/Calendar. It operates on a I2C
bus. It can be used to set a calendar time and has two alarm channels.
When an alarm is asserted the state of the MPF pin of the MCP7940N will
change (depending on gpio active high/active low setting) to trigger an
interrupt.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
This reverts commit 40a5cf6016. Debug
information is no longer necessary as doc-publish workflow is now
working correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Atmel sam0 sercom[uart] pinctrl bindings and implements pinctrl at
driver level. It changes all sam0 boards to use new feature and remove
pinmux driver dependency for sercom[uart]. The samples that require a
binding were update to keep consistency and avoid errors.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Introduce soc_port common functions. The sam0 pinmux driver was
refactored to use soc_port_pinmux_set common function.
This create the common base to implement sam0 pinctrl functions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Adds support for PWM LEDs (red, green, blue) to the mimxrt685_evk board
by adding devicetree nodes and aliases, and configuring the associated
pinmuxes. The red PWM LED is disabled by default because it's connected
to the same PWM channel as the blue PWM LED.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable debug mode and disable quiet option. It should help diagnosing
AWS S3 problems. Some prints have also been added to spot potential
problems.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
`github.event.workflow_run.head_branch` contains the actual release tag
on releases, so it is required. It does not affect the publication of
"latest".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add old APIs marked as deprecated. The API keep the same behavior as
before, so external users have time to migrate their codebase.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Explain device busy API name changes and provide an equivalence list to
ease migration.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Use an enum for the available flags
- Use ATOMIC_DEFINE macro to declare the flag bit field
- Improve naming
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test_dummy_device test has nothing to do with device busy testing,
so remove the calls to pm_device_busy_set/pm_device_busy_clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Publish action has been refactored into a workflow_run based action.
The action is now triggered after a successful doc-build workflow run
(only on main/release branches). The artifacts are downloaded from the
build run and published accordingly. Publish code has been simplified a
bit and PDF upload has been added.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Artifacts will be required for the publish workflow, so do not let the
build workflow succeed without them being uploaded correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Storing west version in a single place avoids keeping duplicates in each
job. Also added a note on why pinning version is important: west
docstrings are extracted from the installed version.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The pip cache should be discarded if any of the required dependencies
changes, so use the hash of the requirements file as a key source.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
xz compression reduces the html archive sice from ~350MB to ~90MB (at
the cost of more compression time). Compression has been moved to a
separate step.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow to override latexmk options via Makefile. Defaults match those in
the CMakeLists.txt.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some devicetre overlays do not reflect the recent rename to make NS
variants of boards with TF-M support have more consistent names; fix
it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
TI recently released a new version of the HDC2080 datasheet, which
slightly update the temperature conversion formula, with a temperature
offset of -40.5°C instead of -40°C. Adjust the code accordingly.
In addition the datasheet also describes a voltage dependent
compensation of -0.08°C/V above 1.8V, however it's not something easily
doable with the current sensor framework, so just ignore that part.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some STM32 series (l0, g0, f0) needs to enable clock of
DBGMCU peripheral, before accessing registers
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Microchip HAL update used by MEC152x projects with eSPI
definition changes. Remove hack from XEC ESPI driver since
the missing symbol is in the HAL.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The STM32 G0, G4, H7, L0, L4, WB and WL series have hardware support for
oversampling. This patch adds support for it, using the oversampling
value provided in the adc sequence. The result is shifted right
accordingly to not change the resolution of the measured value, like it
is done on other ADC drivers.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds the configuration to pass the testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f103rb board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass tes testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f207zg board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration and set the DTS to pass
the dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f429zi board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_l152re board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testscases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f091rc board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Create a shared macro to access the pinctrl_0 property. The pinctrl_0
property includes pinmux phandle, pin and alternate function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Increase LOG_PROCESS_THREAD_STACK_SIZE for ARCv3 64 bit to
fix failing test
tests/subsys/logging/log_core_additional/logging.add.async
due to stack overflow.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This commit sets the below configuration when
tests/drivers/dma/chan_blen_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_TRANSFER_CHANNEL_NR_0=4
CONFIG_DMA_TRANSFER_CHANNEL_NR_1=2
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit sets the below configuration when
tests/drivers/dma/loop_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_LOOP_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR=4
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Driver does not correctly take ic out from sleep mode on init.
Added logic to update mode register on init to take the leddriver
out from sleep mode.
See datasheet for register details.
Fixes#37180
Signed-off-by: Daniel N. Hansten <dnh2000@gmail.com>
Busy simulator is using counter device and entropy device to
generate random cpu load. Counter device cofiguration can be
used to set cpu load interrupt priority and optional pin that
can be set during the load.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
On R-Car the Cortex R7 is usually not the boot processor.
This configuration file make use of the Cortex A57 processor,
to initialize the Cortex R7.
It boils down to few steps:
- Apply power to the Cortex R7
- Set the boot address for the Cortex R7
- loading a firmware
- releasing the Cortex R7 reset
This configuration file also rely on A57 bootloaders,
to initialize device, memory, and security groups.
This file has been tested on openocd 0.10.0+dev-01508-gf79c90268-dirty,
shipped with zephyr sdk 0.12.4, and on openocd master
65c9653cc768f77a5e8cf2af73e0f40d614bdec2.
Thread awareness is possible thanks to this patch:
http://openocd.zylin.com/#/c/6369/
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
When in le_ecred_reconf_req multiple CIDs are received host should
return 0x0002 error (Reconfiguration failed - reduction in size of
MPS not allowed for more than one channel at a time).
This affects test L2CAP/ECFC/BI-04-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
In limited advertising advertising should end after certain timeout.
Previously, limited advertising was just general advertising with
BT_LE_AD_LIMITED flag set. Now, if this flag is set the work is
scheduled, that will disable advertising after timeout.
This affects tests GAP/DISC/LIMM/BV-03-C and GAP/DISC/LIMM/BV-04-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Add clock_control driver to stm32u5 support.
For this series, now deprecated STM32 clock Kconfig symbols
are not added.
Due to a divergence in MSI clock definition, PLL1 use
instead of PLL and lack of sufficient abstraction abstraction
for these a dedicated file has been added.
This should be reshuffled:
- once a better abstraction is provided by LL API for these
- when some stm32 clock control driver rework will be done
after complete removal of Kconfig STM32 clock symbols.
Tested in MSI, HSI, PLL based HSI and PLL based MSI.
Not tested on HSE due to lack of compatible hardware.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add initial basic description for Cortex-M33 based
stm32u5 soc series.
This encompass description for base nodes, such as:
- cpu
- flash
- clocks
- sram
Additionally, provide description for variant stm32u575Xi.
Related to clocks nodes, added bindings for stm32u5 specific
rcc node as well as msi and pll clocks.
Header file stm32_clock_control.h was also updated to support
these new bindings.
Note that for compatibility with existing definitions, clock
node describing main pll clock, known as "PLL1", was given two
labels: "pll" and "pll1".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds support for testing of persistence storage
for mesh Babblesim tests. Adds a sample test
for testing provisioning data.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The type of DMA for the stm32f0 devices was wrong
Its DMA is of type V2bis where the peripheral request is fixed.
The corresponding DMA cell has 2 elements.
The stm32f091 has two DMA instances.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixed the following assertion causing by high level functions
enable gpio interrupt at the same pin at least two times:
ASSERTION FAIL [!arch_irq_is_enabled(irq)]
@ ZEPHYR_BASE/arch/common/sw_isr_common.c:84 IRQ xxx is enabled
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Various non-secure variants of boards with SoCs that have Trusted
Firmware M support were recently renamed without any deprecations
added for the old names. This unnecessarily breaks the build for out
of tree users.
Fix that by adding the following deprecations (deprecated name ->
replacement name):
bl5340_dvk_cpuappns -> bl5340_dvk_cpuapp_ns
mps2_an521_nonsecure -> mps2_an521_ns
musca_b1_nonsecure -> musca_b1_ns
musca_s1_nonsecure -> musca_s1_ns
nrf5340dk_nrf5340_cpuappns -> nrf5340dk_nrf5340_cpuapp_ns
nrf9160dk_nrf9160ns -> nrf9160dk_nrf9160_ns
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is more or less the flow of AT+CIPSEND:
RX TX
-- --
AT+CIPSEND=<...>
OK
>
<data to be sent>
SEND OK / SEND FAIL
'sem_response' semaphore is released by receiving 'OK'. Then after
receiving '>' (which releases 'sem_tx_ready' semaphore) actual data is
sent. Waiting for 'SEND OK' or 'SEND FAIL' is implemented by waiting on
'sem_response' (the same as for 'OK'), which mean that resetting this
semaphore just after sending all data is racy.
Fix that race condition by resetting 'sem_response' just after receiving
'OK', so that neither 'SEND OK' nor 'SEND FAIL' will appear yet (they
will not be sent as long as we won't send whole payload).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Sending AT+CIPSEND=<...> command results in following reply:
OK
>
modem_cmd_send_nolock() invocation was setting command handlers for '>',
but as 'OK' was received first, it was handled as a generic reply. After
receiving 'OK' this function was unsetting command handlers. Then
modem_cmd_handler_update_cmds() was called once again in order to
register '>' handler once again. There was a small period of time where
'>' was not being handled at all.
Fix that race condition by using just introduced modem_cmd_send_ext(),
which allows to leave commands handlers in place and get rid of race
condition where expected command could be missed.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There are currently modem_cmd_send() and modem_cmd_send_nolock()
functions, each with slightly different behavior regarding acquiring (or
not) sem_tx_lock. Introduce a generic function that will allow caller to
select behavior using flags.
While at it, add possibility to disable setting and unsetting command
handlers. This will be useful in situations when there are multiple
replies expected one after the other coming as a response to single
command. This is the case for example with ESP-AT driver, which expects
following data as response to AT+CIPSEND command:
OK
>
where 'OK' is handled by static CMD_RESP (so releasing response
semaphore right away), while '>' is handled by dynamic
CMD_HANDLER (which is releasing another semaphore). Keeping command
handlers in place allows to receive '>' without race condition because
of small period of time where command handlers are not set.
Convert modem_cmd_send_nolock() and modem_cmd_send() to static inline
functions, as they are just a specific invocation of
modem_cmd_send_ext() function.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Cleanup an #ifdef statement in swap_helper.S; use
ARMV6_M_ARMV8_M_BASELINE instead of listing all
Cortex-M baseline implementation variants. This
fixes an issue with Cortex-M23 whose Kconfig
define was not included in the original list.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding a new test-suite for HardFault validation,
for Cortex-M Mainline architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When inside an escalated HardFault, we would like to get
more information about the reason for this escalation. We
first check if the reason for thise escalation is an SVC,
which occurs within a priority level that does not allow
it to trigger (e.g. fault or another SVC). If this is true
we set the error reason according to the provided argument.
Only when this is not a synchronous SVC that caused the HF,
do we check the other reasons for HF escalation (e.g. a BF
inside a previous BF).
We also add a case for a debug event, to complete going through
the available flags in HFSR.
Finally we ASSERT if we cannot find the reason for the escalation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the assessment of a synchronous SVC error into a
separate function. This commit does not introduce any
behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Clean up a few more hard-coded constants
in swap_helper.S and replace them with
CMSIS-like defines in cpu.h. No behavioral
changes in this commit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When locking interrupt in a critical session, it is
safer to do MSR BASEPRI_MAX instead of BASEPRI. The
rationale is that when writing to BASEPRI_MAX, the
writing is conditional, and is only applied if the
change is to a higher priority level. This commit
replaces BASEPRI with BASEPRI_MAX in operations that
aim to lock some specific interrupts:
- irq_lock()
- masking out PendSV
So, for example, it is not possible to actually
unmask any interrupts by doing an irq_lock operation.
The commit does not introduce behavioral changes.
However, it makes irq_lock() more robust against
future changes to the IRQ locking mechanism.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Baseline Cortex-M requires VTOR to be aligned on 64-word
boundary. That is because bit-7 of VTOR is also RAZ/WI.
The commit updates the vector table section alignment for
Baseline Cortex-M to reflect the implementation constraint.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the implementation of z_platform_init from the NXP Hal
into the main Zephyr tree. This function is Zephyr-specific,
is part of the Zephyr module glue code, and does not need to
reside in the module repository. We also rename the function
to z_arm_platform_init. The commit does not introduce any
behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is define in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is defined in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a test case to verify that triggering a
PendSV will lead to a Reserved Exception and
a CPU error, in the no-multithreading case.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the DebugMonitor extension is implemented by the core,
the interrupt may be pended and become active, even if it
is not enabled. Set the priority level of DebugMonitor upon
system initialization to the intended value unconditionally
so we do not end up in undefined behavior, if the exception
is accidentally pended. Since the priority level is set at
init, we can remove resetting the priority in DWT driver
initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the SoC implements SysTick, but the system
does not use it as the driver for system timing
we still need to set its interrupt level. This
is because the SysTick IRQ is always enabled,
so we must ensure the interrupt priority is set
to a level lower than the kernel interrupts (for
the assert mechanism to work properly) in case
the SysTick interrupt is accidentaly raised.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the PendSV interrupt is not used by Zephyr (this is
the case when we build with single-thread support) we
route the interrupt to z_arm_exc_spurious, instead of
assigning 0 to the vector table entry. This is because
the interrupt is always enabled and always exists, so
it is safer to always get the proper error report, in
case we accidentally pend the PendSV, for any reason.
We also add a comment in the PendSV priority setting,
explaining why it has to be assigned a priority level
even if it is not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Create z_arm_preempted_thread_in_user_mode to abstract the
implementation differences between Cortex-M and R to determine if an
exception came from userspace.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create z_arm_thread_is_user_mode to abstract the implementation
differences between Cortex-M and R to determine if the current thread is
in user or kernel mode.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Provide configurations for the nRF52840 DK and nRF5340 DK boards.
Adjust the test to cover specifics of I2S peripherals on nRF SoCs
(need of starting RX and TX simultaneously, lack of internal loopback).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a sample intended to show how to use I2S drivers in processing of
audio streams. The sample starts both the RX and TX streams and adds
a simple echo effect to the received audio signal.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This function takes a node label (not a label property) and returns
true if a node with such label exists and the node is enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a shim that allows using the nrfx I2S driver via the Zephyr API.
Add also missing devicetree nodes representing the I2S peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-i2s" binding with a new property that allows
specifying the clock source to be used by the I2S peripheral (so that
it is possible to use HFXO for better accurracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
A new configuration is available in TF-M, for disabling RNG
independent from key derivation. Introduce a corresponding
Kconfig option to control the RNG API enabling/disabling from
Zephyr.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Minor update to mcuboot to fix the issue with the integration
platforms and allow list in the zephyr boot sample.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a test variant in tfm_ipc test, to validate the
scenario where TF-M is built without BL2 (MCUboot). We
test this on QEMU only (MPS2 AN521).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Due to changes in flash_layout.h for STM32L562, in the current
TF-M module update, we need to modify the DTS overlay files in
the TF-M samples where the board is supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In some platforms, such as the nucleo L552ZE_Q, the hash computation
is done very fast, before the delayed work manages to trigger (and
perform the assert-based validations). Increase the length of the
computations so this race condition can be avoided.
Also, this commit adds some messages in the assert statements for
ease of debugging.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow developers the option of using the DOWNLOAD option
for MCUboot in TF-M bulds with BL2. Using MCUboot from
Zephyr is still the default option.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TFM_MCUBOOT_IMAGE_NUMBER Kconfig option should have
a dependency on TFM_BL2, since it is not applicable
otherwise.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the tfm-mcuboot module in Zephyr (which hosts the
mcuboot version that is used for TF-M builds in Zephyr). We
will force TF-M builds in Zephyr to use the MCUboot version
that any Zephyr builds are using. This will allow Zephyr to
maintain a single mcuboot module version in its default
manifest.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
NS regression tests are hanging on qemu for AN521. The problem is
present in the upstream project as well (issue is filed) so disable
the tests for now on QEMU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Switch to calling the sys_arch_reboot() API directly,
instead of going through the generic sys_reboot API.
This is to avoid locking the IRQs before the reset is
called, which is breaking the PSA call execution.
Also, align sample code to use the same secure service
(platform reset) to show case the PSA connect and close
APIs, instead of a random one (since the reset service
has to work to ultimately perform the system reset).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For TF-M builds on LPCXPRESSO55S69 we set the path to the
NXP HAL sources that are required for building TF-M for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Running postbuild.sh script after TF-M builds is a command,
to be executed after build, not a post-build byproduct.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Upstream TF-M has modified the path name for ARM platforms,
so we fix the board names in the module integration code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a real board/SoC that supports power mgmt on the STM32 side to
get some additional coverage and hopefully catch any build issues
in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support for SDMMC in stm32h747i_disco.
This commit is tested with fat fs list file example in
samples/subsys/fs/fatfs.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
When downloading large files from the hawkbit server
the only time rsp->body_start is checked is on the
first call. After this it is never checked again.
This caused the wrong data to be written to flash
and a failed update.
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
Add ring_buf_size_get() to get the number of bytes currently available
in the ring buffer.
Add ring_buf_peek() to read data from the head of a ring buffer without
removal.
Fixes#37145
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Flush any pending Tx PDUs in the lower link layer before
enqueueing PHY_UPDATE_IND PDU with instant to ensure the
PDU is transmitted before the instant occurs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the advanced scheduling for Extended Initiator to
group central connections established to Extended
Advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Currently, in Zephyr the shell thread is the lowest priority i.e.
K_LOWEST_APPLICATION_THREAD_PRIO. Due to this all the other threads can
preempt the shell thread. Proposed solution is to add Kconfig which
gives the flexibility to change the priority of the shell thread.
This is now implemented using a new Kconfig variable
SHELL_THREAD_PRIORITY_OVERRIDE. By setting this option
SHELL_THREAD_PRIORITY can be set.
Signed-off-by: Uday Ammu <udaykiran@google.com>
Create version 2 of the MEC GPIO driver to support MEC172x to not
interfere with MEC152x. When the MEC172x ECIA interrupt aggregator
driver is ready, this driver will use ECIA for registering GPIO
interrupt callbacks instead of maintaining its own interrupt table.
Add V2 DT binding.
Add the Kconfig configuration settings for the MEC172x GPIO
V2 driver at the SoC and board level.
Add port id to DT allowing use of DT FOR EACH macro in the driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This driver supports the TI INA230 and INA231 Bidirectional Current
and Power Monitors. The devices work on the I2C interface and are
created from DT nodes with a compatible property matching "ti,ina23x".
The following datasheets were referenced while developing the driver:
https://www.ti.com/product/INA230https://www.ti.com/product/INA231
Twister passed:
twister -T tests/drivers/build_all/sensor/
Testing was performed on the stm32g071b_disco board with the following:
Load: ~170 ohms
Voltage: 5V
Measured Values:
Voltage: 5.1 V
Current: 0.032 A
Power: 0.157 W
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Moving the BIT macros from <sys/util.h> to <sys/util_macro.h>
allows the BIT macros to be used in device trees.
Testing: twister -T tests/drivers/build_all/sensor/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
This CL moves the phandles which don't contain 'reg' prop. from 'soc' to
'soc-if' node since they are the interface phandles only. It also
prevents "missing or empty reg/ranges property" warning messages.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
When integration mode is on, any skips on integration_platforms are
treated as errors. This patch adds an exemption for quarantined tests.
They will stay as skipped.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
LIS2DH12TR has an internal pull-up connected to SDA0 pin, while this pin
is connected directly to GND on PCB. This results in constant power
consumption, which can be prevented by disconnecting internal SDA0
pull-up. Do so by adding 'disconnect-sdo-sa0-pull-up' DT property, so
that accelerometer driver will send a proper command during boot.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Using GPIO_ACTIVE_HIGH explicitly says what is the active level of GPIO,
so prefer that instead of using 0.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use `dma_reload()` instead of `dma_config()` within DMA callbacks. This
significantly shortens time required to reconfigure DMA engine to
transmit / receive the next data block and allows to configure higher
I2S bus data rates.
The maximum I2S data rate supported by the driver is still lower than
that of underlying hardware. To fully support hardware capabilities the
I2S driver would have to use scatter-gather / linked-list DMA transfer.
This is currently not supported by the DMA driver.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update Microchip XEC RTOS timer driver adding MEC172x support and
using more device tree properities in the driver. We must also update
the XEC counter driver to use the new GIRQ DT properties.
Add new properties to RTOS timer and RTC timer YAML. These two timers
are linked due to option using a high speed timer for kernel busy wait.
Add Kconfig logic for XEC RTOS timer to MEC172x SoC.
Enable the Microchip XEC RTOS timer in the MEC172x evaluation board.
Add device tree nodes for most peripeherals.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Added tests for fully self-contained packages and use of
CBPRINTF_PACKAGE_ADD_STRING_IDXS flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test cases for cbprintf_fsc_package() and use of
CBPRINTF_PACKAGE_ADD_STRING_IDXS flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added support for conversion from a standard package which contains
pointers to read only strings to fully self-contained (fsc) package.
Fsc package contains all strings associated with the package thus
access to read only strings is not needed to format a string.
In order to allow conversion to fsc package, standard package must
contain locations of all string pointers within the package. Appending
that information is optional and is controlled by flags parameter
which was added to packaging API. If option flag is set then
package contains header, arguments, locations of read only strings and
transient strings (each prefixed with string argument location).
Package header has been extended with field which contains number of
read only string locations.
A function for conversion to fsc package has been added
(cbprintf_fsc_package()).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
add .S file extension suffix into CMAKE_ASM_SOURCE_FILE_EXTENSIONS,
because clang from OneApi can't recongnize them as asm files on
windows, then they won't be added into build system.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
The icx compiler of oneApi will invoke clang-cl on windows,
this is not supported in zephyr now, so change to use
clang directly.
And the clang from oneApi can't recognize those cross
compiling target variables of cmake, such as
CMAKE_C_COMPILER_TARGET, so used other cmake functions
to pass them to clang.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
This reverts commit 445a23a167.
This change was made with the incorrect assumption that using IBECC in
an ACRN VM is a valid use case. Turns out that ACRN will always manage
the IBECC access itself and the Zephyr driver is only useful for running
natively on the hardware.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In commit "pm: Fix weak linkage symbols" (PR #35274),
PM SoC hooks were converted to __weak to avoid clash with
new definition of these symbols in subsys/pm/power.c.
In this process, few SoCs were missed.
Fix this.
#37226
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The KBC/ACPI event data is 4-byte in width and composed of
event/data/type fields. However, the field position is defined by each
chip vendor via macro and not unified in the current implementation.
The commit uses the structure bit field to define and unify the field
position. It helps the application access it with a common approach.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Change DSA API to use `net_if` directly to make API calls instead of
indirectly via `dsa_context` and `switch_id`.
Remove unused `switch_id`, `switch_enable_port`, and `dsa_get_context`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Changed slave interface initialization code to be more generic and less
dependent on a specific number of ports.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Changed port numbers to start at zero since they're used as indexes
into various arrays in the code.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
it8xxx2 supports 'm', 'a', and 'c' extensions.
Enable them to save flash space and also improve
latency of fetching code from flash.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
In the eeprom read operation, when rambuf was available
mutex was not unlocked after the read. Consequence of that is
that device was blocked after that read for incoming operations.
This commit fixes the issue
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This CL replaces offset macros of pmc 'multi-registers' such as
PWDWN_CTLn with internal inline functions for better readability.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL replaces offset macros of scfg 'multi-registers' such as DEVALTn
and LV_GPIO_CTLn with internal inline functions for better readability.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Document that using west outside of a west workspace needs
ZEPHYR_BASE to be set. If this is not set, the instructions
on the "Application Development" page don't work.
Previously, "Getting Started Guide" and "Application Development"
pages told you to run `zephyr-env.sh/zephyr-env.cmd` which would
set ZEPHYR_BASE, but this was removed in Zephyr 2.3.0
Signed-off-by: Daniel Wong <drojfjord@gmail.com>
In the eeprom read operation, when rambuf was available
mutex was not unlocked after the read. Consequence of that is
that device was blocked after that read for incoming operations.
This commit fixes the issue
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add driver implementation and header files for a MEC172x
aggregated interrupt driver. Enable the parent(ECIA) node
to have the driver initialize interrupt hardware for use.
Enable child nodes for those GIRQs used for aggregation.
Refer to chip documention for the list of GIRQs restricted
to aggregation and those which support direct mode.
Add chip level device tree node for MEC172x EC interrupt
aggregator parent and GIRQ children. Each child node contains
a list of sources representing the source bit position in the
GIRQ registers.
Add DT bindings for ECIA and GIRQ nodes.
Add build file(s) and configuration items for the MEC172x ECIA
aggregated interrupt driver. Add and enable the MEC172x interrupt
driver on the MEC172x evaluation board(EVB). Enable parent node to
initialize ECIA hardware. Child nodes are left disabled until a
future driver needs them.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Check for the address family of the packet when setting the multicast
destination address used in the response. Current code checks either the
query type or the stack configuration, which can result in setting the
wrong type of address for the frame.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
In order to avoid to generate warning log message from
file system, first check if directory exists before trying to
create it.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
There are multiple reasons to want to find out if file or
directory exists, for example to create it. Stating and
finding out it doesn't exist should not cause an LOG_ERR call as
this gives information to the user in a normal call case.
Fixes#35718
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
To be consistent in how order header flags are handled when
updating the common header format fields, explicit check
for ADI flag in previous auxiliary PDU buffer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remember last used DID for each SID, so that DID value used,
when updating the advertising PDU fields, change between
consecutive changes to PDU fields.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make the Extended Advertising DID value updated to be unique
for every new advertising set created.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Verify that AD Data when switching to Legacy Directed, and
restore it when switching back to Legacy Non-Directed
Advertising mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix corrupt AD data used after directed advertising by
storing a backup of the AD data before switching to directed
advertising. Restore back the AD data with switching to non-
directed advertising.
The fix also addresses AD data backup when switching between
Legacy and Extended Advertising.
Fixes#18850.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to resolve AdvA in the received
AUX_CONNECT_RSP PDU before generating the connection
complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds support for SDMMC driver, Which
was missing. THi commit will solveserror SDMMC init
error on stm32l496g_disco boards.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
This commit adds support for SDMMC driver,
Which was missing. THi commit will solves
error SDMMC init error on STm32F746G_DISCO
boards.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
Add support for sam_e70_xplained, sam_v71_xult based on TC0 counter.
Note: TC module is a 16-bit counter. Even with slow, 32768 Hz input
clock the time span counted by the driver is short.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add basic counter driver based on Timer Counter (TC) module for Atmel
SAM family.
Remarks:
- The driver is not thread safe.
- The driver does not implement guard periods.
- The driver does not guarantee that short relative alarm will trigger
the interrupt immediately and not after the full cycle / counter
overflow.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Change naming of TC_CHANNEL to TcChannel in Tc struct to align with
a new convention used by samv71, samv71b series.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update to include the commits:
- patch: same70, samv71: Add TC waveform/capture mode registers
- patch: same70, same70b: Align naming of TcChannel in TC
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
According to the Reference Manual of several series(G0,L5,WL,WB,...)
RNG_DR register value should only be used if it is different from 0:
"Because when it is the case a seed error occurred between RNG_SR
polling and RND_DR output reading (rare event)."
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit introduces an automatic recovery procedure in cases an
entropy source error was detected.
- On Series with soft reset support a soft rest is executed.
- On Series w/o soft reset support the pipeline is cleared by reading
the RNG_DR 12 times.
With this changes the check for seed errors uses SEIS flag instead
of the SECS flag.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Define SoC hooks as weak symbols so this way applications can
overwritten them defining strong symbols.
The problem is that currently SoCs are defining these interfaces as
strong symbol inhibiting the possibility of applications bring their
own implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
SoC hooks are defined as weak functions for the case where they are
not implemented by a SoC. The problem that may happen is when an
application define it as weak as well. In this case, no compilation
error is issued but the version that will be used depends on the build
order. Just remove the weak placeholder implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This board has the capability to use SERCOM2 as an i2c
interface on pins 8 and 9.
This adds the neccessary pinmux settings and devicetree
node.
Tested with the i2c shell module.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
Interrupt polarity register don't support rising and
falling edge triggered at the same time, so I correct
logic operation to match this.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Correct SYS_CLOCK_HW_CYCLES_PER_SEC and
SYS_CLOCK_TICKS_PER_SEC to match our real setting value
for precise timing.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
When the Hardware Information Driver (HWINFO) provides a device ID
longer than the configured USB serial number, truncate the most
significant part instead of the least significant part. The lower part
is usually having more entropy, e.g. on STM32.
Fixes#34550
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add the missing includes to make the header more portable. It currently
requires other headers to be included before it.
Signed-off-by: Yuval Peress <peress@chromium.org>
SMP implementation across bt/udp does not check
if allocation of the buffer was successful.
If the buffer is not granted an error shall be
returned.
This patch fixes BUS FAULT issue when NULL
pointer is referenced.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit updates the supported features of stm32l5 and stm32wl boards
to match the devicetree configuration.
- add link to board defconfig and board.dts
- sort supported features table alphabethically by interface.
Additionally CRYP peripheral is added as supported feature to the
mikroe_mini_m4_for_stm32 board documentation.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The test sample.drivers.crypto.stm32 was built only for the stm32 crypto
driver (build_only: true).
This commit changes the configuration to run the test and adds regex for
the supported modes.
Additionally integration_platform native_posix is removed from the
crypto.stm32 test configuration, such that stm32 targets built in CI.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit uses filter instead of allow list for the
sample.drivers.crypto.stm32 test case.
As a result the ci test is not only built on mikroe_mini_m4_for_stm32,
but also on lora_e5_dev_board, nucleo_wl55jc and stm32l562e_dk.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds dt definitions for the hw aes accelerator
on stm32g0 Series.
The accelertor is available on the following socs:
stm32g041, stm32g061, stm32g081, and stm32g0c1.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds a dt node for the hw aes accelerator of the
stm32l5 series.
The stm32l562Xe.dtsi file now includes the newly created
stm32l562Xe.dtsi with the additional aes definitions instead of the
stm32l552Xe.dtsi file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds crypto support for several series which have
the same/very similar or same AES IP.
This includes G0, G4, L5, WL.
WB is also very similar but, expects the app to load the key via CKS.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds bindings for the STM32 AES accelerator.
Common properties of st,stm32-cryp are moved into
st,stm32-crypto-common.yaml.
The accelerator supports ECB, CBC, CTR, GCM, GMAC, and CCM
chaining modes.
128 bit bit data blocks with cipher key lengths of 128 and 256 bit are
supported.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Correct the wrong operand of clflush instruction. The old operand
points to a location inside stack and doesn't work. The new one
works well by taking linux kernel code as reference.
End address instead of size should get round up
Add Kconfig option to disable the usage of mfence intruction for
SoC that has clfulsh but no mfence supported.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
If BT_ISO is enabled we now compile conn.c which contains a
lot of functionality used by BT_ISO, even for broadcast-iso
builds, i.e. builds that do not require BT_CONN.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the guard such that the iso_mtu and iso_pkts are
not guarded by BT_CONN as they should be available for
iso broadcast-only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the bt_acl_recv function that works similar to
bt_iso_recv but for ACL data only, simplying the
generic bt_conn_recv function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_disconnect and conn_disconnect functions
to the ACL group.
Also adds a guard in the iso.c file for connected ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the notify_le_phy_updated, notify_le_data_len_updated,
notify_le_param_updated, notify_remote_info,
notify_disconnected and notify_connected functions
to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the deferred_work callback function to the ACL group.
This also moves the static function conn_lookup_iso
which is only called form deferred_work.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_lookup_state_le, bt_conn_lookup_addr_le and
bt_conn_is_peer_addr_le functions to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_get_tx_power_level and
bt_conn_le_get_tx_power_level functions to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Start a group of functions guarded by CONFIG_BT_CONN
that are for connected-only functions. This is a
preparation step for allowing compilation and usage of
conn.c for ISO broadcast-only builds.
Moving all connected-only functionality into a single
group will also allow a possible move of all those
functions into an connected (ACL) only file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
z_smp_init() is only available if CONFIG_SMP is defined,
smp_timer_init() also depends on two Kconfig parameters. Also make it
conditional in cavs_timer.c. Also clarify some SMP-related comments
there.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
log_backend_std_put had its own implementation for getting standard
flags which was identical to the one in log_backend_std_get_flags().
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds temperature platform used by the IEEE 802.15.4 Radio
Driver. The new platform requires an enabled temperature sensor.
The new hal_nordic revision updates the nRF 802.15.4 component.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
In file crc16_sw.c essential type of LHS operand (16 bit) is wider than
essential type of composite expression in RHS operand (8 bit).
In crc32c_sw.c and crc32_sw.c Essential type of LHS operand (32 bit) is
wider than essential type of composite expression in RHS operand (8 bit)
Found as a coding guideline violation (MISRA R10.7) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Some recent updates to the bluetooth shell test cause build failures
in CI for platforms that don't have a uart that supports interrupts
(ie ip_k66f or xmc45_relax_kit).
As these tests are build-only a single platform is sufficient to get
coverage and utilize platform_allow to limit to just one board target
intead of integration_platforms. As this will limit to the single
platform for both PR based CI and nightly CI (integration_platforms
only is utilized for PR based CI, so we'd need other filtering for
the nightly CI and there isn't any value in building these tests
on more than the single platform so platform_allow makes the most
sense).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If "Cmake build failure" is detected test instance get status "error".
Despite this in final report this error is counted as failure. It can
be fix, by set proper results of each testcase in instance from None
to "BLOCK" after found Cmake error. After this fix, error is counted
properly in final report.
Fixes#37140
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
SRAM partitioning for non-secure should be done via a reserved-memory
node and not fixed-partitions. fixed-partitions is meant for flash
style devices.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The irq will be enabled at the condition of start or repeat
start of I2C. If timeout occurs without being wake up during
suspend(ex: interrupt is not fired), the irq should be
disabled immediately.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Includes a table to display compatibility between debug probes and host
tools.
Moves the J-Link External Debug Probe section up for consistency with
host tools listings and to clarify separation between sections.
Reformats Flash and debug with ST-Link section with tabs for different
host tool options for clarity and readability.
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Reformats the three sections on flash configuration for devices with
different bootloader compatibility into tabs to streamline instructions
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Change removes logs and assertions from default configuration.
They can be optionally enabled with debug_overlay.conf.
CONFIG_BT_BUF_CMD_TX_COUNT is increased to avoid dropping
HCI commands.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
This patch improves the general look and feel of the LaTeX (PDF)
documentation build. Changes include:
- A custom title with relevant information has been created
- Some colors have been adjusted to match those in the web template
- Charter font family is used
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The functions to check advertising and target address in a
PDU are used only inside the same file, hence make them file
static functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add target address check to extended scanning implementation
to detect invalid target address present in primary and
auxiliary channel PDU. Implementation is reuse of the check
used in the initiator after refactoring to pass parameter to
differentiate, its use for primary or auxiliary channel, and
for scanning or initiating.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit avoids enabling interrupts during Zephyr init.
Details:
Interrupts will be enabled only when the first thread starts or if
arch_irq_unlock() is called before that.
The logic is now:
1. Enable traps, disable interrupts globally
2. Initialize bss
3. Call _PrepC
Use in-place memset() to avoid register window overflow and underflow
traps. That is perhaps not the common scenario, but could happen with
memset() implementation which contains SAVE instructions on a system
with few register windows.
The second, and more important, item this commit addresses is that it
increases the processor interrupt level (priority) to highest. That
is, it enters _PrepC with all maskable interrupts levels disabled.
This fixes some cases where interrupts could be taken after
z_clock_driver_init() while the system was still initializing. That
seem to have occurred when clearing large thread stacks.
The third thing is that we now start out with current window pointer
0 (PSR.CWP=0) instead of 1. It has no practical implication except
for preparing for possible future support for systems with only
two windows.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds an example application for Sensirions SGP40 gas sensor
and SHT4X T/RH sensor.
The measured T/RH are used to make use of the on-chip T/RH compensation
of the SGP40.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
XCC's linker cannot properly process our linker script with
regard to cached/uncached memory regions as the linker cannot
correctly calculate addresses using boolean operations.
Fix this by doing address pointer arithmetic manually to
move between cached and uncached memory regions.
The addresses of symbols were compared via nm and they are
the same before and after this change.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC's own xt-objcopy does not recognize the "--dump-section"
command. So simply copy the objecy file into binary so it can
be included in the final bootloader binary.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC doesn't like that a for loop which declares the loop
variable inline. So extract the declaration of the loop
variable outside the for loop.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the inclusion of sys/util.h inside the #if block to
avoid this being included when going through XCC's assembler.
With the old behavior, a bunch of std*.h get pulled in resulted
in build failure as keywords such as "typedef" are not supposed
to be in assembly files according to XCC assembler.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC doesn't recognize GCC pragma to ignore -Warray-bounds. So #if
it out, or else XCC would complain about unknown option for all
syscall generated header files.
Fixes#36661
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The compiler option "-fdiagnostics-color=always" is not known to XCC
(which is based on really old GCC). So don't enable color
diagnostic output when building with XCC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The gperf generated data needs to be placed at the end of memory
to avoid pushing symbols around in memory, but data in .sdata section
aren't placed currently. Also renaming .sdata section to kobject_data.*
section and add it to kobject_data output section to fix issue.
Fixes#37023.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The stack array tstacks was declared in the header file using
the same macro which defines the same stack array but with
an added "extern" in front. This macro adds alignment and section
attribute which are actually not the same as the actual stack array
defined in main.c. The section name used in the section attribute
contains the file name where the stack array is defined or extern
declared. So the same symbol, in this case z_interrupt_stacks, has
different attributes in two places, and GCC 11 starts to complain
about this. So use the newly introduced macro to extern declare
the stack array without adding/replacing any symbol attributes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In test_kobject_release_null(), dummy is not initialized
before being fed to k_object_release(). So set it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Not all arch has native support for __builtin_popcount() on
hardware and GCC falls back in using software only implementation.
However, with GCC 11, this is no longer included automatically
and requires linking explicitly with libgcc.a. This is not
trivial as it requires changes some linker magic and a sizable
change to most linker scripts. So opt for an easy solution
by implementing our own popcount in the test.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The z_interrupt_stacks was declared extern in the kernel internal
header file using the same macro which defines the same stack
array but with an added "extern" in front. This macro adds
alignment and section attribute which are actually not the same
as the actual stack array defined in kernel/init.c. The section
name used in the section attribute contains the file name where
the stack array is defined or extern declared. So the same
symbol, in this case z_interrupt_stacks, has different
attributes in two places, and GCC 11 starts to complain about
this. So use the newly introduced macro to extern declare
the stack array without adding/replacing any symbol attributes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
A stack can already be declared extern via K_KERNEL_STACK_EXTERN().
This adds similar macros for stack arrays.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Moves Z_KERNEL_STACK_LEN() higher in the header file so it is
near the other stack size calculation macros. Also, it was
actually declared after it is first used in the header.
So this seems a logical move.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the type casting of the incoming addresses to
the bit ops from uint32_t* to uint8_t*. This avoids compilers
and static analyzers complaining about the incoming out of
bound access if incoming argument is an array smaller than
4 bytes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added bt_mesh_msg_send() which can be used by the application to
directly send model layer messages without local instantiation of
related models. Also added bt_mesh_msg_cb_set() which allows the
application to recieve mesh model layer messages without local
instantiation of related models.
Added bt_mesh_has_addr() which returns a bool. For unicast addresses,
this returns whether or not bt_mesh_elem_find() was successfull. If the
above mentioned bt_mesh_msg_cb_set() has been used by the application to
set a message callback, this returns true so that the stack attempts to
push every model message up to the application via the callback. If no
callback has been set, group addresses are searched to see if the stack
should pass the message up the stack to an instantiated model.
These changes allow applications that do not or can not instantiate
models to interface with models in a mesh network. This is applicable to
applications which act as a Bluetooth mesh gateway, sniffer, debugger,
network monitoring, non-mesh relay/extender, etc.
In app_keys.c friend.c net.c bt_mesh_elem_find() is used only to
determine the existance of an address. The full return value of
bt_mesh_elem_find() is unecessary and so was replaced by the above
mentioned bt_mesh_has_addr() function in these instances.
Simplified bt_mesh_elem_find() by removing the search through group
address. Since the above mentioned bt_mesh_has_addr() function handles
instances where group addresses must be searched, it was no longer
necessary to preform this search in this function.
Signed-off-by: Bud Wandinger <bud@budkoembedded.ca>
Add support for power management and the shutdown mode for bq274xx fuel
gauge sensor. This now allows boards that have any kind of low power
mode to turn on or off the sensor.
Tested on a Company's custom board with bq27421 sensor on it.
Signed-off-by: Luka Lopotar <luka.lopotar@greyp.com>
For setting the APP_KEY, "mib_req.Param.AppKey" field should be used.
Fix it!
Fixes: #36540
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The flag source_periph seems to be incorrectly set in dma_stm32.
In case the transfer direction is from periph to mem, then the
stream->source_periph is 1 (true) else it is false.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Based on the new bindings for the stm32 dma feature,
the overlay for enabling the dmamux on spi client is modified.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Based on the new bindings for the stm32 dma feature,
the overlay for enabling the dma on uart client is modified.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The stm32l47r soc has a dma of type dma-v2, so the cells have
only 3 elements,. This adpat for the quadspi periph.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
All the macro for dma-cells are now in the
include/drivers/dma/dma_stm32.h header file.
So the include/dt-bindings/dma/stm32_dma.h is no more
useful and removed from #include.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The macro to set the element of the dma-cells for each peripheral
are defined in the dma_stm32 header file
and used in the periph driver (as dma client)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Each stm32 dma can be of V1 or V2 or V2bis type. Each type
has a dma-cell with specific nb of element. The feature and slot
properties are not required depending on the stm32 family.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This will define a new bindings for any stm32 dma feature
Depending on the soc family, the DMA is of V1 or V2 or Vbis type
And give a factored definition for feature
The difference is on the dma-cell structure.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is the dma V2bis which is particular DMA V2 instance for
stm32F1 and STM32L1 soc series. This DMA does not use the dma slot
Otherwise it is similar to version V2.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This provides a command line interface to query and modify
bridge instances, similar to Linux's brctl utility.
It can be used to inspect an application's bridge usage,
or manage a bridge of its own in a generic way.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is accomplished with 3 fake ethernet interfaces hooked to a
common bridge, simulating incoming packets and controlling each
interface's transmission product.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds the ability to create Ethernet bridges for connecting
separate Ethernet segments together to appear as a single
Ethernet network.
This mimics the Linux functionality of the same name.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Implement a clock control driver for Microchip MEC172x handling
configuring the 32 KHz input sources for the PLL and peripheral-32k
clock domains. MEC172x differs from MEC152x. MEC152x had one 32K source
for both PLL and peripherals. MEC172x allows the two domains to use
independent 32 KHz sources. Device tree updated to provide addresses
of hardware used by the driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Some of the shell tests need a devicetree "fixed-partition" and
"storage_partition" for the settings partition support. Not all
boards support this, so filter the tests on the devicetree having
this.
Fixes#37115
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Logo was accidentally deleted as part of some docs cleanup. Add it back
with a new name making it more explicit that it belongs to the readme.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
cc13x2_cc26x2 had its own power policy that was implementing the same
logic available in the default residency policy. Also, this policy was
unnecessarily setting up a timeout to wakeup the system. This is not
necessary, the power subsystem takes care of this.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The exit latency for the standby state is available in
policy/policy_residency_cc13x2_cc26x2.c. Just copying it to the state
definition in dts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Option to have continous scanning simultaneously while
advertising and multiple peripheral role is active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Babblesim test of Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Application demonstrating Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added sample to demonstrate use of multiple identity and be
able to be connected to multiple times from same central
device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This action will run on each PR and will post a comment if footprint of
some reference applications has changed, initially as a FYI but later it
will be enforced when footprint for example is gone beyond a certain
threshold.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Very simple script to diff between two ram or rom reports generated by
size_report. When you call call the ram_report or rom_report targets you
end up with a json file in the build directory that can be used as input
for this script.
The output shows which symbols insreased and which decreased in size and
also tracked added/remove symbols as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prevent CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT when LOG_PRINTK.
Prevent use of assert in cbprintf header when printk is redirected
to logging. Enabling it would lead to circular header includes and
compilation failure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Assert header is including printk header and cbprintf header
may be included by printk.h when printk is redirected to logging v2.
That creates circular includes which must be prevented by
preventing using assertion and including assert header file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add auto-generated kconfig header to linker script pre-processing
via -imacros flag. This permits link scripts supplied via
zephyr_linker_sources() to use CONFIG_* variables.
Signed-off-by: David Palchak <palchak@google.com>
ZEPHYR_BASE and ZEPHYR_BUILD directories were passed to Sphinx via
environment variables. However, these paths can be easily discovered by
the conf.py file itself. As a result, Sphinx is less dependent on CMake
to operate.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the macro STM32_LSE_CLOCK is always defined and therefore systems
without lse crystals hang on startup.
Used #if instead of #ifdef.
Signed-off-by: Alexander Wachter <alexander.wachter@leica-geosystems.com>
This adds the config to PASS the tests/drivers/dac/dac_loopback
on the nucleo_f746zg board, when PA0 and PA4 are connected.
The DTS of the nucleo_f746zg defines the ADC1 ch0 and DAC1 ch1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the dts to PASS the tests/drivers/dac/dac_loopback
on the nucleo_f429zi board, when PA0 and PA4 are connected.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Reformatted "Configuring a Debug Probe" to display only one of the
options at a time to improve reading flow, and split paragraph
instructions into an easy to follow list with emphasized differences
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Reformatted "Configuring a Debug Probe" to display only one of the
debug probe options at a time to simplify text on screen when
following along
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Implementation of hardware semaphore algorithm of STM32 AN5289
to enter and exit low power
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit introduce new HAL Telink module used by
new Telink B91 RISC-V platform drivers.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
The LaTeX build succeeds without the fix_tex.py script, so remove it.
The file actually mentions ".tex file produced by doxygen", so it may
not be relevant for Sphinx after all.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
add a test into latency_measure test case to measure
the average time for dynamic memory allocation and release.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
This commit enables ADC support for stm32l496g_disco
platform in device tree. VREF is configured to use
internal. Current VREF is 2.5V.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
Add MEC172x chip specific headers for Port 80h debug
capture, quad SPI, and VBAT registers. Update due to
merges.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Because we use the extended kconfig, we have already
supported relative paths, and it is clearer to use
relative paths in the bluetooth submodules.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
If bsim tests are built without errors then warnings are hidden.
A couple of them has sneaked in recent PRs.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Because these two functions are called from threads and ISR.
And they run a bit-wise OR operation on the interrupt registers.
So protect them to prevent race condition between thread and ISR
context where causing an interrupt won't enable as expected.
eg.
- Pseudo code of thread enable IER1's bit1:
1. load word from IER1 (0x40) and write into CPU register S1
=> S1=0x40
2. Or S1's bit1
=> S1=0x42
(But if an interrupt is triggered here)
3. Store word to IER1 from S1
=> IER1=0x42
(IER1 will be 0x42 not 0x43, IER1's bit0 is disable again due to the
race condition above)
-Pseudo code of ISR enable IER1's bit0
1. load word from IER1 (0x40) write into CPU register S2
=> S2=0x40
2. Or S2's bit0
=> S2=0x41
3. Store word to IER1 from S2
=> IER1=0x41
4. Go back to thread.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
So far the maximum configurable file size was limited to 16KB (2^14).
This might be enough for small partitions on internal flash. For
external QSPI memories however, this is certainly too restrictive.
Change maximum configurable file size to be 1GB, which is 2^30. Such
value will prevent signed integers overflow on 32-bit platforms, while
giving user full flexibility on how big log files should be.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Replace the dot diagram with its original source. This is possible
thanks to the Sphinx Graphviz extension. Note that some style attributes
have been removed as defaults are already provided by the extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable the built-in Sphinx Graphviz extension to allow creating Graphviz
diagrams natively on the source files. Some style defaults have been
enabled to make sure diagrams are consistent and have good quality in
both light and dark modes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
reuse the lpc's lpadc driver for rt1170, modify the dts and add
some macro to shield some code of LPC series. Also add the
board support inside the tests/drivers/adc/adc_api/src/test_adc.c,
and a dts node:zephyr,user inside
samples/drivers/adc/boards/mimxrt1170_evk_cm7.overlay
Signed-off-by: Crist Xu <crist.xu@nxp.com>
The global variables in the Minimal C library are now placed in
z_libc_partition, update the document accordingly.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Some Kconfig options are left marked as inline literals. But in
Zephyr document, we use the "kconfig" role provided by Sphinx.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Under the "OS Abstraction / POSIX Support" section in the "User and
Developer Guides", we somehow had rand() function already listed and
marked supported, but not srand(). Add srand() to the list.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
When MBEDTLS_RSA_C is defined, mbedtls define its local version of
rand() function. Since we already have rand() in our minimal libc, we
can safely remove this.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
rand() and srand() are pseudo-random number generator functions
defined in ISO C. This implementation uses the Linear Congruential
Generator (LCG) algorithm with the following parameters, which are the
same as used in GNU Libc "TYPE_0" algorithm.
Modulus 2^31
Multiplier 1103515245
Increment 12345
Output Bits 30..0
Note that the default algorithm used by GNU Libc is not TYPE_0, and
TYPE_0 should be selected first by an initstate() call as shown below.
All global variables in a C library must be routed to a memory
partition in order to be used by user-mode applications when
CONFIG_USERSPACE is enabled. Thus, srand_seed is marked as
such. z_libc_partition is originally used by the Newlib C library but
it's generic enough to be used by either the minimal libc or the
newlib.
All other functions in the Minimal C library, however, don't require
global variables/states. Unconditionally using z_libc_partition with
the minimal libc might be a problem for applications utilizing many
custom memory partitions on platforms with a limited number of MPU
regions (eg. Cortex M0/M3). This commit introduces a kconfig option
CONFIG_MINIMAL_LIBC_RAND so that applications can enable the
functions if needed. The option is disabled by default.
Because this commit _does_ implement rand() and srand(), our coding
guideline check on GitHub Action finds it as a violation.
Error: lib/libc/minimal/include/stdlib.h:45:WARNING: Violation to
rule 21.2 (Should not used a reserved identifier) - srand
But this is false positive.
The following is a simple test program for LCG with GNU Libc.
#include <stdio.h>
#include <stdlib.h>
int main()
{
static char state[8];
/* Switch GLIBC to use LCG/TYPE_0 generator type. */
initstate(0, state, sizeof(state));
srand(1); /* Or any other value. */
printf("%d\n", rand());
printf("%d\n", rand());
return 0;
}
See initstate(3p) for more detail about how to use LCG in GLIBC.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Add Microchip MEC172x header set 5 chip specific
peripheral headers. Update with recent merged code.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Zephyr Bluetooth Low Energy Controller for mesh stack
uses pre-emptible continuous scanning, allowing advertising
events to be transmitted without delay when advertising is
enabled. No need to compensate with scan window duration.
Zephyr Bluetooth Low Energy Controller built for nRF51x
SoCs use CONFIG_BT_CTLR_LOW_LAT=y, and continuous scanning
cannot be pre-empted, hence, scanning will block advertising
events from being transmitted. Increase the advertising
duration by the amount of scan window duration to compensate
for the blocked advertising events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Disable use of BT_CTLR_SCAN_UNRESERVED with BT_CTLR_LOW_LAT.
nRF51x SoC needs to block any CPU use inside radio events,
hence use of radio without time reservation is required for
proper functioning of Controller in nRF51x.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This converts register access from macro to functions.
This allows SoCs to override these functions if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the HPET timer to use kconfig to specify clock
frequency instead of relying on calculation at runtime.
When the frequency is known at build, this allow the toolchain
to optimize some calculations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames MIN_DELAY to HPET_CMP_MIN_DELAY, and also allows it
to be overridden. The default delay is for HPET with relative
high frequency, and may not suitable for all HPET
implementations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extracts the hard-coded value into a macro which can be
overridden. This is in preparation for SoCs where the period
is not in femptoseconds.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch adds a devicetree configuration example for the Everlight
B1414 LED controller.
An overlay for the nucleo_f070rb board is provided. It assumes that
a B1414 LED controller is connected to the PA7 pin (SPI 1 MOSI). The
WS2812 SPI driver is used.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch states that the Everlight B1414 LED controller is compatible
with the Worldsemi WS2812. Some information about it is added to the
WS2812 DT binding and driver Kconfig files.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Since this driver is working reliably, let's use k_usleep() instead of
k_busy_wait() (as suggested in a TODO comment) to latch and reset the
LED strip controller.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some devices compatibles with the WS2812 IC have a different reset/latch
delay.
This patch introduces the "reset-delay" optional property for the WS2812
DT binding and adds support to the ws2812_spi driver. This new property
allows to configure the reset/latch delay of a WS2812 compatible LED
strip controller from its DT node.
If omitted the driver uses 8 microseconds by default (which is good for
the WS2812 IC).
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some devices compatibles with the WS2812 IC have a different channel to
color mappings (e.g. RGB, BGR, RGBW, etc).
This patch introduces the "color-mapping" required property for the
WS2812 DT binding and adds support to the ws2812_gpio and ws2812_spi
drivers. This new property allows to configure the color to channel
mapping of a WS2812 compatible LED strip controller from its DT node.
Since this property also allows to know if a white channel is available,
then this patch removes the "has-white-channel" property.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
In case a non-readable resource gets updated (either by the server or
with an API), it makes no sense to send a notification in such case, as
no such resources are not included in notifications anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds length defines for all provisioning PDUs and uses them to split
prov_link.conf_inputs into separate fields.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Opened directory descriptor is leaked when returning 1. Fix that by
utilizing goto in function return path.
Fixes: 6b18e6992d ("subsys/loggin/log_backend_fs: added recovery after
file lost")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When DMA switches from one buffer to another ENDRX followed by
RXSTARTED is generated. Code flow assumes that ENDRX will be
handled before RXSTARTED but this may not be the case if there
is a short between ENDRX and RXSTARTED and event occurs after
ENDRX event check but before RXSTARTED event check. In that case,
RXSTARTED event is handled first. Such case may happen if there
is a higher priority interrupt that may preempt UARTE interrupt
handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a new property to the "nordic,nrf-clock" binding to allow
configuration of the HFCLKAUDIO frequency.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Consensus was reached to locate Microchip MEC172x header files
in the zephyr MEC172x SoC folders. These are the first set of
headers specific to MEC172x and common to the MEC family. Hardware
register structures will be located in peripheral specific headers.
Update based on latest merge of MEC172x related files.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add guards to the structs. This has two purposes:
1) Reduce size of only one of them are enabled
2) Fix a compile issue if only one of them were enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add guards to the structs. This has two purposes:
1) Reduce size of only one of them are enabled
2) Fix a compile issue if only one of them were enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a couple of compile tests for the bt shell for
BT audio, including checking that the services can be
compiled individually without error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If either AICS or VOCS clients were not enable, then the VCS
client could not be enabled as there was a compile error
in the function that registered callbacks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Even though it's highly unlikely that a component of time
would ever approach INT_MAX, use the unsigned specifier to mitigate
any unexpected behaviour.
Fixes#36814
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Follow-up: #16817, commit af968c2694
The referred commit introduced app.overlay as a general application
devicetree overlay if no specific board overlay is found.
This commit document this behavior in the devicetree howto.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Refactors the mcux lpc driver to use DT_INST_FOREACH_STATUS_OKAY instead
of hardcoding each instance. Tested with samples/basic/button and
samples/basic/blinky on mimxrt685_evk_cm33.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The parser module name collides with builtin parser module in python.
This seems to break the import in windows.
Signed-off-by: Elliot Revell-Nash <elliot.revell-nash@wdtl.com>
Added minimal device tree and board files to build Microchip
MEC172x. SOC layer stripped down to allow build for checking
compilation only.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Move @MulinChao, @WealianLiao, and myself from code owners entry
dts/arm/nuvoton/npcx to dts/arm/nuvoton.
So we will be chosen as reviewers automatically when dtsi files under
dts/arm/nuvoton are touched.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
In certain build cases we get the following compiler warning:
i2c_rcar.c: In function 'i2c_rcar_transfer_msg':
i2c_rcar.c:168:6: warning: 'ret' may be used uninitialized in
this function [-Wmaybe-uninitialized]
Fix this by initializing ret to 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make this test part of drivers rather than have it be board specific
with the hope that we can add more tests and configurations supported in
the future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sensor_value_to_double should never alter the given value of val.
Therefore adding a const qualifier makes sense.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
Flag that indicates if a given packet is being retransmitted has become
obsolete since more detailed flags were added. This commit removes the
flag and references to it altogether.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit aligns the nRF5 ieee802154 driver with the latest
API changes necessary to handle security-related flags properly.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit updates hal_nordic revision to bring the latest changes in
the nRF IEEE 802.15.4 radio driver.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit extends the struct net_pkt structure to contain flags
related to IEEE 802.15.4 security processing. Added flags:
* ieee802154_frame_secured - indicates if a frame is authenticated and
encrypted according to the configuration stored in Auxiliary Security
Header
* ieee802154_mac_hdr_rdy - indicates if MAC header is ready to be
transmitted or if it requires further modifications
These flags can be used by the upper layer to correctly configure
retransmissions of frames.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Fix HCI Reset Command from asserting when there is pending
connection creation requested on coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a define for invalid Extended Advertising SID value of
255 required when generating legacy advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing initialization of legacy advertising PDU length
when advertising sets are reused between extended and legacy
advertising modes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use CONFIG_BT_CTLR_BROADCAST_ISO when CONFIG_BT_CTLR_ADV_ISO
or CONFIG_BT_CTLR_SYNC_ISO Kconfig option is supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added Bluetooth Specification references to the
implementation of Channel Selection algorithm #2 in the
Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the functions required to calculate the SubEvent 1
and SubEvent n mapped channel indices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the check for mixed use of Legacy vs Extended HCI
commands for Periodic Advertising related HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix extended advertising report to set the directed bit in
the event type when receiving directed non-connectable
advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix extended advertising PDUs seen after the advertising
duration has elapsed, by considering the events skipped
due to overlap with other events which is provided by
the ticker lazy parameter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks for invalid PHYs supplied to HCI LE Extended Scan
Parameters and LE Extended Create Connection commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Newline character is automatically appended in log backends such as
UART, so there is no need to add it explicitly.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is '%u' and '%d' in format message, while there is only one
argument (besides format string). Remove ununsed '%u' to stop printing
garbage.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
FS backend is no different when it comes to producing human readable
timestamp. Allow to select it when FS is the only enabled logging
backend.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
RTC interrupt was reading CC value and passing it to the handler.
However, higher priority interrupt could preempt RTC interrupt
and set new CC value. In that case CC value read in the RTC
interrupt context was not the one that triggered the interrupt.
Added fallback to COUNTER value if that case is detected.
Using COUNTER is not as precise as CC because it returns time
when event was handled and not when event occured but it is the
only option since CC value is overwritten.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The len argument always has the same value as
usb_dev.setup.wLength, which is also the last received
USB device request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
After extracting from ull_adv_sync_pdu_set_clear functions:
ull_adv_sync_pdu_alloc, ull_adv_sync_extra_data_set_clear
Use of ull_adv_ext_hrd_data structure became unnecessary.
The extra_data member of the structure was never used
due to separate function responsible for setting extra_data
content.
In all cases content for extended advertising header fields
may be passed to the ull_adv_sync_pdu_set_clear directly
as void * pointer, instead of pointer to ull_adv_ext_hdr_data.
This simplifies use of ull_adv_sync_pdu_set_clear as well
as removes unneccesary code to handle special structure type.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
extra_data is not used by ll_big_create and ll_big_terminate.
extra_data_prev and extra_data_new are optional arguments for
ull_adv_sync_pdu_alloc.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
ull_adv_sync_pdu_alloc function was extracted from ull_adv_sync_pdu_-
-set_clear function. The arguments list of ull_adv_sync_pdu_alloc
was derived from source function but the acutal functionality is
only part of what it was before.
The ull_adv_sync_pdu_alloc does not change extended advertising
PDU header fileds. The hdr_add_fields and hdr_rem_fields arguments
were used to allocate or not allocate memory for extra_data related
with new periodic advertising PDU. Also hrd_data pointer was
not used by the function.
The function arguments list was simplified.
New enum ull_adv_pdu_extra_data_flag was introduced to provide
named flags for extra_data memory management.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Mark the Controller Area Network (CAN) driver API as unstable. The CAN
API was introduced in Zephyr v1.14 and has since gained support for many
different hardware platforms.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Pin PB5 is part of ARM Cortex-M debug interface and by default
configured to output TDO/TRACESWO signal. Disable TDO/TRACESWO
function on PB5 pin when LOG_BACKEND_SWO is not enabled. This
ultimately frees the pin to be used by standard SoC peripherals.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Fix `poll()` handling for DTLS clients when the underlying socket is an
offloaded socket. As in this case no `k_poll()` is used underneath, it's
not possible to monitor the handhshake status with `tls_established`
semaphore. Instead, do the following:
1. If no handhshake is in progress yet, just drop the incoming data -
it's the client who should initiate the handshake, any data incoming
before that should not be processed.
2. If handshake is currently in progress, lift the `POLLIN` flag and add
small delay to allow the other thread to proceed with the handshake.
3. Otherwise, just proceed as usual.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TLS/DTLS handshake in most cases is a blocking process, therefore
the underlying socket should be in a blocking mode to prevent busy
looping in the handshake thread. Fix this by clearing the O_NONBLOCK
flag on the underlying socket before the handshake, and restoring it
afterards.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes#36667
If you had a single log file with index 0 created and you reboot
the log backend wasn't counting it and was overwiting it.
If you filled that file up before rebooting then it worked as
expected, creating a new file at the next index on each boot.
Signed-off-by: Elliot Revell-Nash <elliot.revell-nash@wdtl.com>
Demonstating usage of IPC Service. Multi-instance RPMsg
was ued as a backed for IPC Service.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
Implementation of the backend for IPC Service.
Multi-instance RPMsg was used as a backend.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
IPC Service allow plugging in different transport backends.
Specifies a generic API that is implemented by the backend.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
This patch implements a service that adds multiple instances
capabilities to RPMsg.
Each instance is allocated a separate piece of shared memory.
Multiple instances provide independent message processing.
Each instance has its own work_q.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
The zephyr sam gmac driver don't get register address and, in some
cases, peripheral id from devicetree. This replace headers constants
in favor of devicetree values.
This fix wrong Atmel SAME7x/SAMV7x gmac register address and add
missing peripheral id property for SAM family.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current GMAC compatible not allow especialize properties by SoC
family. Split current generic Atmel GMAC compatible into two new
compatibles which are defined by SoC families. This increase the
freedom and avoid odd situations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This fixes properties documentation and two devicetree styles:
- properties with wrong code identation and
- property description tag style
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
A syscon device is a device managing a memory region containing a set of
registers that are not cohesive enough to represent as any specific type
of device. We need a driver for that because several other drivers could
use the same region at the same time and we need to io-map the region at
boot for MMU enabled platforms.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The location of the documentation guide is inconsistent with other
documentation guides, so move it to the `guides` folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
libc optimization changes regarding memset and memcpy
added by this 5d55730cf6
caused wifi driver issues, which won't
let device get IP address.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit includes the following:
1. Add symbol for choice option. So we can override the default value
by an earlier definition.
2. NPCX9 doesn't support 33MHz SPI clock in the header. So disable the
option for NPCX9.
3. NPCX9 support 512K flash. Change default to 512k for NPCX9.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Make the imxrt6xx drivers consistent with the other SoC family drivers
by building them in the nxp hal library. Similar to commit
cf0587c3ec, this stops leaking long source
paths in build directories and makes them deterministic.
When building samples/hello_world for mimxrt685_evk_cm33, this changes
the build directories from:
build/
└── zephyr
└── CMakeFiles
└── zephyr.dir
└── home
└── maureen
└── zephyrproject
└── modules
└── hal
└── nxp
└── mcux
└── drivers
└── imxrt6xx
├── fsl_cache.c.obj
├── fsl_common.c.obj
├── fsl_flexcomm.c.obj
├── fsl_gpio.c.obj
├── fsl_inputmux.c.obj
├── fsl_ostimer.c.obj
├── fsl_pint.c.obj
└── fsl_usart.c.obj
to:
build/
└── modules
└── nxp
└── lib..__modules__hal__nxp.a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add a small paragraph about Floating Point services
in Cortex-M, focusing on the important considerations
around footprint and runtime overhead.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section about specific considerations
around chain loadable images.
Add a brief section about code relocation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Memory protection features in Cortex-M applications
- user mode and system calls
- MPU based stack overflow detection
Add section about memory map and mpu programming.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
- add a paragraph about CMSIS
- add a note about maintenance status of Cortex-M
- add a paragraph about testing the Cortex-m porting
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add list of the available QEMU targets for Cortex-M
platforms in Zephyr along with the corresponding feature set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding sections to describe
- isr handling principles
- different kinds of interrupts
- reserved interrupts and levels
- locking and unlocking interrupts
- zero latency interrupts
- dynamic direct interrupts
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding a small paragraph to describe the details around
thread stack alignment. Adding a detailed section to cover
the thread context-switch and the stack limit checking.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM Cortex-M user guide. Initial commit including a table
for listing supported features in the different
Cortex-M variants.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The gen_devicetree_rest.py script is responsible for generating .rst
files that comprise the devicetree bindings index. As a first step, it
finds all the YAML files that might be bindings.
However, it's doing that incorrectly and ignoring files in nested
subdirectories. This affects bindings in places like
dts/bindings/net/wireless, which are not found.
Fix it by using recursive=True in the glob.glob() call.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Test fails consistently in CI but local builds succeed. Puzzling. In
order to keep main green, disabling this test only for qemu_riscv32
until a solution is found.
```
% west build -p always -b qemu_riscv32 -t run \
tests/kernel/mem_protect/stack_random
...
*** Booting Zephyr OS build zephyr-v2.6.0-1039-g523764b3fd75 ***
Running test suite stack_pointer_randomness
===================================================================
START - test_stack_pt_randomization
Test Stack pointer randomization
stack pointer changed 13 times out of 64 tests
PASS - test_stack_pt_randomization in 0.5 seconds
===================================================================
Test suite stack_pointer_randomness succeeded
===================================================================
PROJECT EXECUTION SUCCESSFUL
```
```
*** Booting Zephyr OS build zephyr-v2.6.0-1063-g0106d8f2a391 ***
Running test suite stack_pointer_randomness
===================================================================
START - test_stack_pt_randomization
Test Stack pointer randomization
stack pointer changed 0 times out of 64 tests
Assertion failed at WEST_TOPDIR/zephyr/tests/kernel/mem_protect/\
stack_random/src/main.c:68: test_stack_pt_randomization: \
(sp_changed equal to 0)
Stack pointer is not randomized
FAIL - test_stack_pt_randomization in 0.6 seconds
===================================================================
Test suite stack_pointer_randomness failed.
===================================================================
PROJECT EXECUTION FAILED
```
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Assuming gpio devices are required by pinmux which is used
by any device make it a device that is initialized in preliminary
steps of platform init.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move GPIO devices clock handling in stm32_pin_configure function
which is also used in stm32_setup_pins.
Additionally, add device usability check to be sure gpio driver
was initialized before being used by pinmux pseudo driver.
Last, going from the assumption that GPIO devices should be
initialized before being used by pinmux, then there is no need
to enable clock in case CONFIG_PM_DEVICE_RUNTIME=n.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
So far only upstream boards were listed. Use just introduced
zephyr_module.parse_modules() function to get information about
out-of-tree board roots. Append them to user provided args.board_roots,
so out-of-tree boards from west modules are listed as well.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add parse_modules() function, which will offload most of the work in
main() and additionally allow external Python code to use that function.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Refactor Periodic Advertising time update function to use
caller supplied Periodic Advertising PDU to calculate the
time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Apply suggestions from code review, and change to using
BT_HCI_ERR_SUCCESS instead of returning 0.
Co-authored-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended and Periodic Coded PHY time reservation. The
define earlier used does not have calculations for Coded
PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to update Periodic Advertising time
reservations when advertising data and/or CTE length is
updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check for already enabled and started Periodic
Advertising when HCI LE Set Periodic Advertising Parameters
command is called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out Periodic Advertising time calculations so that
it can be reused when PDU length is updated as part of
advertising data updates.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to update Extended Advertising time
reservations when advertising and scan response data are
updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Export the function calculating the primary channel
advertising event time reservation, so that Extended
Advertising implementation can reuse it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out Extended Advertising time calculations so that
it can be reused when PDU length is updated as part of
advertising data and scan response data updates.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to update legacy advertising time
reservations when advertising and scan response data are
updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out advertising time calculations so that it can be
reused when PDU length is updated as part of advertising
data and scan response data updates.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use a conservative turnaround time of 150us covering slower
nRF51 and faster nRF52 CPU that influence the turnaround
timing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add nucleo_wl55jc to platform_allow for lora send/receive and class_a
samples. The board has a variation of the sx1262 driver, this should
allow to build test that code path.
Fix the existing config as well to specify the platforms on a single
line, as currently only the last entry is considered.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Define the subghz radio node in the module dtsi file, with the internal
RF switch connection and TCXO setting, and point at it from the
corresponding dev board file.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add a device node for the subghz radio in stm32wl.dtsi. The radio is
present in all chips of the series, so having the node there with the
common properties simplifies the board dts files.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add support for the STM32WL integrated radio, based on the sx1262. The
STM32WL implementation does not use any GPIO, and the signals are routed
to other units of the SoC and accessed with the ST HAL.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Convert the standalone part of the sx126x driver to the new gpio_dt_spec
APIs. This allows moving the specific GPIOs in that part of the driver
and out of struct sx126x_data.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This adds support for controlling the SUBGHZSPI NSS line in STM32WL
devices. This is a special dedicated SPI port only connected to the
radio device internally, chip select happens through a bit in the PWR
module. Adding a special dt-property to identify the port, it all gets
built out on non-WL devices.
Deduplicate the existing dts bindings in the process, and add the new
one for the special spi with the new property.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add a dts node for st,stm32wl-subghz-radio. The device is integrated in
STM32WL series SoCs, and based on the sx1262, but it does not use any
gpio as all the necessary signals are internally connected to various
SoC units.
To account for that, make the redundant gpio optional in the template
files, but mark them as required in the sx1261 and sx1262 definitions,
to match with what's used in the driver.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Current impĺementation fails due to missing stop bit
when reading data. This fixes it and refactor the implementation
by adding k_busy_wait when waiting I2C bus completion.
Also, this implementation is based on esp-idf v3.0.
It will be refactored based on latest esp-idf v4.3 using proper
low level calls.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#34015
The STMPE1600 is an I2C based GPIO expander. This initial patch
only supports reading from/writing to the pins on the STMPE1600,
and there is currently no support for interrupts.
Signed-off-by: Titouan Christophe <moiandme@gmail.com>
Introduce a set of header files to be able to define and declare
sections and regions in the linker script. Introduce also DT helpers to
retrieve data back.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
To be able to get a tokenize DT string without the quotes. Deprecate
also DT_ENUM_TOKEN and DT_ENUM_UPPER_TOKEN.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This reverts commit 9e58a1e475.
This change is in conflict with commit 94f7ed356f ("drivers: serial:
add a dummy driver for vnd,serial"). As a result two equal serial
devices are defines, resulting in link error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Fix a couple of issues related to Power Management:
1. A build error because 'dev' was used even if not declared
in the caller routine scope
2. The lis2mdl power management init specific routine was
not declared in in the device instance definition
Signed-off-by: Armando Visconti <armando.visconti@st.com>
So far modem API used UART device names / labels. Change API to operate
on device pointers instead, so that we stop using device_get_binding()
in modem core and in some DT compatible modem drivers.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Serial device is needed for building drivers that use DEVICE_DT_GET().
None of the currently used modem drivers use that right now, but this is
about to change.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add DEVICE_DT_GET_ONE() macro. This macro is similar to
DEVICE_DT_GET_ANY() but instead of returning NULL if no enabled,
compatible device instance is found, it throws a compilation error.
This is useful for compile-time checks in samples.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Bluetooth 5.3 specification was recently released, and
has a new version identifier (12) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a link to best practices about copyright notices and when to and
when not to change them or add them.
Fixes#6777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the content in the default index is HTML only, so create an
index just for PDF and keep it clean.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the symbol name on top and in the page title. This will enhance
search results and adds a missing page header that is needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Right now the kconfig index is randomly placed in the guides. This is a
table similar to other indeces we have and should be considered as part
of an appendix rather than place it in the middle of the documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When stopping the interface, also abort the RX routine and enable RF
power saving. Will re-start RX on iface start.
Also fixed a bug with `cmd_fs` crashing at RF wakeup because `rf_mode`
was allocated on stack.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
This is useful if the user wants to set specific latexmk options, e.g.
-quiet for CI.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Sphinx automatically generates a Makefile/make.bat that allows to build
the LaTeX output. This converts the CMake `pdf` target into a shim to
this Makefile, making the solution more future-proof if Sphinx decides
to change something.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The extension was not evaluating the GENERATE_HTML option correctly. The
get_doxygen_option returns a `List[str]`, not a `str`.
This effectively means that the Zephyr apidoc has not been updated for a
while as the extension was not moving the output to the final
destination folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
CRC16 was removed by simply decreasing length of the last fragment by 2.
This worked as long as last fragment was longer than 1 byte. If not,
then last fragment was corrupted (its length ended up being 65535),
leading to undefined behavior.
Fix CRC16 removal by utilizing recently introduced
net_pkt_remove_tail(), that properly handles multiple fragments.
Reported-by: Jim Paris <jim@jim.sh>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Introduce a helper function for being able to remove any arbitrary
length from tail of packet. This is handy in cases when removing
unneeded data, like CRC once it was verified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
If a write offset isn't a multiple of the nor page size, and the
length is too large to fit within a single page, it could wrap around
in that page.
Tested on i.MX RT1064 internal flash using NVS settings
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit enables true rng for nucleo_f207zg platform. This has been
tested with tests/drivers/entropy/api and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
replace custom crc8 with sys/crc8
use sys_put/sys_get helpers for byteorder specific operations
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add driver for sensirion consumer humidity sensor line.
Supports shtc1 and shtc3, but only shtc3 is tested.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Instead of waiting forever for the SPI transfer to complete, let's use
a timeout value and bail out if elapsed. The timeout value logic is,
xfer_len/frequency + tolerance
Tolerance value can be modified using a Kconfig symbol,
CONFIG_SPI_COMPLETION_TIMEOUT_TOLERANCE. It defaults to 200ms.
Fixes: #33192
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There was an issue with wrong length of CTE send in connectionless
mode, with periodic advertising PDUs. Radio peripheral was not
configured to send CTE with correct length while PDU had CTEInfo
field informing receiver that CTE is attached to the PDU.
Source of the problem was in ll_df_set_cl_cte_tx_enable function.
Order of parameters in ull_adv_sync_pdu_alloc was wrong.
ULL_ADV_PDU_HDR_FIELD_CTE_INFO was speficed as hdr_rem_fields.
Because of that extra_data, memory used to provide CTE configuration
to LLL, was not allocated. PDU content is prepared in ULL, so CTEInfo
field included correct information, while Radio was never configured
by LLL to send CTE.
ull_adv_sync_extra_data_set_clear received a pointer to hdr_data,
instead of a direct pointer to df_cfg structure. When extra_data
was allocated correclty, wrong CTE configuration was provided
copied there and LLL received invalid CTE length. It was different
than the length in PDUs CTEInfo field.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Default Voltage scaling range selection (range2)
doesn't allow to configure Max frequency
switch to range1 to match any frequency
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Default Voltage scaling range selection (range2)
doesn't allow to configure Max frequency
switch to range1 to match any frequency
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Fix macro used in g4 file to enable LSE clock.
Then, to avoid no-op configurations, generate an error
when MSI Hardware auto calibration is selected but LSE
clock is not enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This PR addresses radio signal stength measurement during
and before PPP session. The PR provides provides facility
of readout for both +CSQ and +CESQ versions depending
upon the modems. This PR follows the idea of rssi readout
of PR#35496. Additionally, reliable Cell info update
is also ensured.
Signed-off-by: Tahir Akram <mtahirbutt@hotmail.com>
Add I2C bus initial support to Renesas R-Car SoC series.
Both I2C2 & I2C4 buses are supported on R-Car H3 board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This patch add support for I2C on the Renesas R-Car.
This I2C hardware block can be found on various Renesas R-Car
SoC series.
It allows to perfom read and write on I2C buses in an
interrupt based way on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Third generation R-Car series products have up to
seven I2C bus interfaces conformant with the
Philips Semiconductors (now NXP Semiconductors) I2C bus
(Inter-IC bus) specification.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
As a first step towards being more forgiving on invalid inputs, allow
string-valued aliases properties that do not point to valid nodes when
the user requests permissiveness.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modeled after dtc's --force option, the idea is this will try harder
and harder over time to produce an object despite malformed input.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
`_FOREACH_` macros do not allow the caller to pass additional arguments
to the `fn`. A series of `_VARGS` variants have been added that allow
the caller to pass arbitrary number of arguments to the `fn`:
```
DT_FOREACH_CHILD_VARGS
DT_FOREACH_CHILD_STATUS_OKAY_VARGS
DT_FOREACH_PROP_ELEM_VARGS
DT_INST_FOREACH_CHILD_VARGS
DT_INST_FOREACH_STATUS_OKAY_VARGS
DT_INST_FOREACH_PROP_ELEM_VARGS
```
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Add power management support (runtime-idle and suspend-to-idle)
support for the NXP Kinetis KE1xf SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Enable the NXP Kinetis Low Power Timer (LPTMR) OS timer driver when
power management is enabled as the Arm SysTick timer cannot wake up the
KE1xF from deep sleep.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add NXP Kinetis Low Power Timer (LPTMR) OS timer driver shim. Since the
LPTMR does not support asynchronous changes to the timer period, only
non-tickless mode is supported.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Keep the Slow Internal Reference Clock (SIRC) running in low-power
mode.
This allows peripherals that needs to remain operative in low-power
mode to use the SIRC as clock source.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Do not enable the Arm SysTick driver by default. Instead, rely on the
default Kconfig settings for the Arm SysTick driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Determine the default CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC from devicetree
when using the Arm SysTick hardware timer.
When the NXP KE1xF SoC series is using the Arm SysTick as hardware
timer, the cycles/second will always be equal to the CPU core clock
frequency.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The config/data casts are not strictly necessary. Furthermore, config
was being casted to non-const.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use the recently introduced struct gpio_dt_spec to store GPIO
information and operate with them.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds a devicetree chosen node to the mimxrt1170_evk_cm7 board to link
Segger RTT and SystemView sections in DTCM by default. Enables the AHB
clock while the CM7 is sleeping to allow debug access to the TCM.
Note that automatic RTT control block detection may not search the DTCM
address region, therefore you may need to manually set the RTT control
block address or search range in the Segger host tools (SystemView or
RTT Viewer). For example,
$ JLinkRTTViewer -ra 0x20000000
Tested with:
- samples/subsys/shell/shell_module/
- samples/subsys/tracing/
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
`OT_LOG_LEVEL_NONE` has some uses within OpenThread but it is not
hanled in the Zephyr's platform implementation. This commit makes
use of those logs as `LOG_LEVEL_ERR` level.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
By default the hifive1 board doesn't enable the SPI controller that
the flash is on. As such this test will not build on that platform
due to lack of a missing SPI bus controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable serial driver such that sensors commuicating via uart
can be added to this test(using the vnd,serial driver).
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds a serial dummy driver compatible to vnd,serial.
This is needed that devices can access the uart device in tests
like tests/drivers/build_all/... .
Add myself as codeowner to avoid complicance check failure.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Indicate which files have to be cleaned for each target. This feature is
only supported for CMake >= 3.15 and is ignored on older CMake versions.
Build will still succeed, but the `clean` target will not clean the
additional build files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify the devicetree generation. Most of the extra options are not
used, so they have been removed to make things easier to maintain.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor the Kconfig target. Mostly formatting in this case. The Kconfig
script is also added as a dependency of the CMake configuration step, so
that if it is changed, the Kconfig generation step will be re-run.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor the pdf build targets. The Sphinx latex build is now invoked by
the 'latex' target. The 'pdf' target can be used to build the resulting
LaTeX files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor HTML targets. The 'html' target is kept as is, 'sphinx-html'
equivalent is now 'html-nodeps'.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Group dependencies all together. Some have been simplified, e.g. Sphinx
and others improved, e.g. LaTeX.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
west is currently optional, however, when not found its docs will not be
available and the zephyr_module CMake utility will not be able to find
modules (unless ZEPHYR_MODULES is used). Other Python dependencies, i.e.
the ones listed in the requirements file, are not checked, so do the
same for west.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We excluded the beaglev_starlight_jh7100 from this test but only did
the kernel.device.pm test. We should have excluded the platform
from both tests.
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test ocassionally fails on the mps2_an385 platform in the CI, due
to strict timing requirements of the test.
Relax the timeouts and acceptable fuzz time a bit, to prevent the
failures in the future.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use GPIO output high and low to simulate I2C start and stop
conditions to restore i2c to normal.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Create the pinmux phandle to the I2C driver node in the
devicetree. When the pinmux_pin_set function in
i2c_it8xxx2_init can refer to the setting of this phandle.
It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The SoC driver name is 'USB High-Speed Interface (USBHS)'. This rename
from usb_dc_sam to usb_dc_sam_usbhs allowing add others SoC drivers
like 'USB Device Port (UDP)' that is found at SAM4S/E variations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Give the choice a name so that the soc/board developers can change the
default selection in their Kconfig.*.
For example:
choice CACHE_TYPE
default HAS_EXTERNAL_CACHE
endchoice
There was a similar issue had beed discussed:
https://github.com/zephyrproject-rtos/zephyr/issues/6948
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I07c3e78a5243b30912f8e44fa3181fa163016318
The `pdftex` utility that is used for PDF documentation generation does
not support GIF images.
This fix replaces the animated `ReelBoard-Blinky.gif` with an animated
PNG (APNG) image `ReelBoard-Blinky.png`.
Note that APNGs are backwards compatible with "normal" PNGs. Modern
web browsers will display APNGs in the same way as animated GIFs, while
any application that can read PNG files can read APNG files
successfully.
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
Adds a BabbleSim test for provisioning multiple devices in a row. This
scenario had a regression in #33782, which is fixed in #35405.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
QUIET flag is now overriden according to the `doxyrunner_silent`
configuration value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change will process Doxygen output and will map it to the Sphinx
logger. Things like errors and warnings will be mapped to actual Sphinx
logger error and warnings. In practice this means that when Doxygen
throws a warning and Sphinx is run in "-W" (warning as error) mode, the
build will fail. It also has some other advantages such as the
possibility of filtering issues using the warnings_filter extension.
It is also expected that CI errors not being displayed issue is fixed
with this change.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
add min_ram to some test applications
as we found below platforms have size issues
TWR_KE18F and FRDM_KL25Z
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Some commands shell not be present when shell is not acting as
a log backend. Use of them lead to crash in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit changes the entry referencing the hal_stm32 module
into west.yml. This brings the fixes to build issues when stm32
asserts are enabled.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add single-register MMIO GPIO driver for complex cases where
only several fields in register belong to GPIO lines and each GPIO
line owns a field with different length and on/off value.
Such CREG GPIOs are used in Synopsys em_starterkit and HSDK boards.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This commit add the support of "Interrupt driven UART"
to the R-Car UART driver and enable it in the related
Kconfig.
The driver is supporting nearly all the methods that are
described in the "Interrupt driven UART" part of the
uart_driver_api.
This new version of the driver has been tested on
H3ULCB board by running "uart_basic_api" test suite.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This commit enables entropy support for nucleo_wl55jc.
Additionally it sets the PLL Q divider to 2, which was not set in
the board dts before.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds the dt node for rng to the stm32wl series
and sets it as chosen zephyr,entropy source.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds support for stm32g0 socs with integrated rng and hw aes
acceleratior, which are stm32g041, stm32g061, stm32g081, and stm32g0c1.
It also adds the definitions for the rng peripheral
and sets it as chosen zephyr,entropy source.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds entropy support for stm32wl and stm32g0.
Pll is used as clock source and has to be enabled,
other clock sources are not supported at the moment.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds support for the seeed studio LoRa-E5 Dev board,
which is powered by a module based on stm32wle5jc soc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds the dts definitons for the seeed lora-e5 module.
Additionally I add myself as codeowner for the new dts/arm/seeed
directory.
This module packages a stm32wle5jc Sub-GHz Wireless Soc,
together with a 32MHz TCXO, a 32.768KHz crystal oscillator, and
power and RF circuitry.
With the introduction of lora support definitions for the radio
will be added in a future commit.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
To support single core stm32wlex series, cpu2 prescaler is set
only on dual core soc variants.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds support for stm32wle4xx, stm32wle5xx single core socs,
as well as stm32wl54 dual core soc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds dt support for stm32wle4, and stm32wle5 single core,
as well as stm32wl54 dual core socs.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback used by the device runtime PM can be easily replaced by a
simple state set after calling the state set/get calls. Broadcast logic
is simplified too, leading to the same previous behavior.
Since this is the only place where this callback was used, it can now be
removed from all devices and so pm_control callback signature
simplified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The bootloader itself contains the i.MX RT6xx boot header, so we don't
need to duplicate it when building chainloaded applications.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt685_evk device tree
to support mcuboot on the external octal SPI flash. This flash is rated
for 100K minimum program-erase cycles per sector, therefore this
partition configuration supports approximately 100K / (24576/8128) =
33073 upgrades.
Tested with samples/subsys/mgmt/mcumgr/smp_svr. The image swap takes
about a minute and a half to complete.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the i.MX RT600 SoC series to be more consistent with the i.MX
RT10xx SoC series by choosing a child node (external flash device) of
the FlexSPI bus for zephyr,flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
With this patch, zephyr can enable SMP directly. Otherwise
zephyr needs TB-R to provide psci function.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Armv8-A and Armv8-R both support PSCI. So PM_CPU_OPS_PSCI's
dependency should be "ARM64" rather than "ARMV8-A".
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add strong definition z_arm64_el2_plat_init() and it is controlled
by CONFIG_SOC_FVP_AEMV8R_EL2_INIT.
VMPIDR_EL2 must be set manually on EL2. The purpose of VMPIDR_EL2 is
that holds the value of the Virtualization Multiprocessor ID and This
is the value returned by EL1 reads of MPIDR_EL1
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add psci and more cpu nodes into fvp_baser_aemv8r.dts. The purpose
of it is perparing to support SMP.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
The nrf9160dk_nrf9160_ns and nrf5340dk_nrf5340_cpuapp_ns don't have
enough space for debug builds as configured so excluded them from
this specific test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit adds support for Zephyr basic mgmt group to mcumgr.
The first command added to the group is storage erase command.
Authored-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Tests check transmission, receiving beacons in situations
of IV update (with test mode on) and key refresh procedures.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
When zsock_close() is called, socket is freed before the mutex for the
socket is unlocked. If the freed socket is given to another thread
immediately, the mutex for the socket will be initialized by the new
socket owner, while the mutex is still locked by the thread calling
zosck_close().
Fixes#36568
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
When tcp_send_data() is called to resend data, but there is no data
to resend, zero length packet is allocated and NULL net_buf is passed
to net_buf_frag_insert() in which assertion fails.
Fixes#36578
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
Add some more example to the description of zephyr_library_amend().
This should help users to get input of the extra possibilities that this
function provides.
See: #35770
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On the native_posix board global object constructors
are run by the underlying OS runtime init prior to
Zephyr kernel init. Thus Zephyr should not run global
object constructors a second time. Doing so breaks
application behavior that relies on global
constructors doing work that must be done only once.
See bug #36858 for more information.
Signed-off-by: David Palchak <palchak@google.com>
Avoid some cases of running out of disk space in the daily build. Add
setting -M option to remove artifacts as we build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is a name clash when using G4 series LL TIM driver depending on
the inclusion order of the LL TIM and pinmux headers. If the LL headers
are included after pinmux is included, AF1 and AF2 definitions used by
pinmux clash with the AF1 and AF2 TIMx register names.
In order to solve this problem with minimum impact, the following has
been done:
1. Prefix the AFx and ANALOG definitions with STM32
2. In order to avoid changing all *-pinctrl.dtsi files, the STM32_PINMUX
macro contatenates STM32_ with the provided mode.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Updates CXX support documentation to reflect exception support
added in fixes for #32448 and #35772.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This commit adds a new Kconfig option CLOCK_CONTROL_NPCX_EXTERNAL_SRC.
With this option enabled, the internal 32.768 KHz clock (LFCLK) is
generated by the on-chip Crystal Oscillator (XTOSC). Otherwise, the
LFCLK is generated by the Low-Frequency Clock Generator (LFCG).
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
NPCX power.c use LOG_MODULE_DECLARE(soc), but NPCX chip doesn't
register soc log module. This CL register soc log in soc.c to fix NPCX
build error for power management & log system.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Fix Periodic Synchronization setup when handling invalid
number of channel count in Periodic Advertising's Sync Info
structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This property has been marked as deprecated in 2.5.0 and was not
actually used for even longer time.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use macros to access SCA and Channel Map fields in the Sync
Info structure in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ISO test to demonstrate ACAD field in periodic
advertising PDUs. Here, test changing the periodic
advertising data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Based on review comments, refactor out sync_info population
to be performed by the caller of the function that prepares
the extended advertising PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the set/clear function to modify the common extended
header format in the PDU to add/remove ACAD.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to add/remove ACAD field in the common
extended header format of the periodic advertising PDU on
create/terminate BIG.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add CMake warning message when building experimental
features like Advertising Extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
refactor flash_page_get_info to simplify and to avoid using mixing the
usage of an off_t (offs) and an uint32_t (page_index).
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
adv_sync_hdr_set_clear was just wrapped by ull_adv_sync_pdu_set_clear
so we can merge both into single function.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds simple helper to update CTEInfo. It assumes proper periodic
adv PDU as input to simplify code.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds some initial support to update AD in chain. We still only
support placing AD in 1st PDU, but this will properly copy any linked
PDUs that may be added due to e.g. CTEInfo present.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds adv_sync_pdu_init helper which initializes pdu_adv buffer
with contents of AUX_SYNC_IND/AUX_CHAIN_IND PDU. Extended header flags
can be specified to reserve required space for corresponding fields if
necessary.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This enables chaining ota for periodic advertising. AUX_CHAIN_IND PDUs
will be sent automatically if AuxPtr is detected in preceding PDU.
AuxPtr offset is always set to achieve minimal required frame spacing,
i.e. 300us (T_mafs). AuxPtr in all PDUs in advertising train are
updated on enqueue since PDU spacing is already known at that time so
we do not need to waste time in LLL.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds support to allow advertising PDUs to be linked which is
required to send advertising trains, i.e. AUX_CHAIN_IND.
PDUs are linked with a simple single-linked list, the pointer to next
PDU is stored at the very end of PDU buffer. This prevents it from
being overwritten if PDU is modified and allows for build time offset
calculation.
There are few helpers added to make handling easier, e.g.:
- get next linked PDU
- get last linked PDU
- link one PDU to another
- link PDU at the end
- release all linked PDUs (except for 1st)
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This function is the same as lll_adv_pdu_alloc except it also allocates
extra data at the end - it can just use lll_adv_pdu_alloc call to avoid
extensive c&p.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds helper to always allocate advertising PDU either from memory
pool or pdu_free queue and does not reuse existing PDU in adv_pdu.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Advertising channel packets do not have MIC, there's no need to have
extra parameter which always has to be set to 0 anyway.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This commit updates the NS board variant from
`nrf9160dk_nrf9160ns` to `nrf9160dk_nrf9160_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit updates the NS board variant from
`nrf5340dk_nrf5340_cpuappns` to `nrf5340dk_nrf5340_cpuapp_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from
`v2m_musca_s1_nonsecure` to `v2m_musca_s1_ns` to maintain
consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from
`v2m_musca_b1_nonsecure` to `v2m_musca_b1_ns` to maintain
consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from `mps2_an521_nonsecure`
to `mps2_an521_ns` to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from `bl5340_dvk_cpuappns`
to `bl5340_dvk_cpuapp_ns` to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit configures usart3 to use dma in uart_async_api test
on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures usart3 to use dma in uart_async_api test
on stm32l562e_dk platform. Short pin2(PC10) & pin 3 (PC11) of usart3
in CN4 connector on stm32l562e_dk platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures spi, dma & dmamux to run spi_loopback test
on nucleo_l552ze_q platform. The tx & rx pin of spi1 should be
shorted before running spi_loopback.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures DMA to run tests/drivers/dma/loop_transfer
test on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the DMA to run
tests/drivers/dma/chan_blen_transfer test on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the required DMA parameters to run
tests/drivers/dma/loop_transfer test on stm32l562e_dk platform.
This has been tested and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the required DMA parameters to run
tests/drivers/dma/chan_blen_transfer test on stm32l562e_dk platform.
This has been tested and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
In stm32l5xx soc, the LL_DMA_InitTypeDef has 2 more fields
(DoubleBufferMode and TargetMemInDoubleBufferMode) that must be
initialised with 0 else the configuration is wrong and gives
wrong values to the LL_DMA_Init function. Due to this the test
tests/drivers/dma/loop_transfer too would fail.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables spi1 in dtsi and updates the
documentation for nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables usart3 channel on nucleo_l552ze_q platform.
This would also be used to test usart in dma mode with
tests/drivers/uart/uart_async_api.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables usart3 channel on stm32l562e_dk platform.
This would also be used to test usart in dma mode with
tests/drivers/uart/uart_async_api.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds dma1, dma2, dmamux support in dtsi for stm32l5
series. This commit also fixes a compilation warning due to the
usage of upper case in "reg = <0x4000F400 0x400>".
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
-Hcl option instructs linker to use MetaWare C Compactlib.
According to MWDT documentation "Compactlib is not thread-safe"
So, let's use MetaWare C library instead which is thread-safe.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
We previously removed the iso data path when the iso channel
disconnected. Since the iso data path is unique for a given
iso channel (by handle), it does not make sense to remove
it for a disconnected channel, as the channel is, in
a sense, not existing anymore.
This update is to better comply with the bluetooth
core spec, and to avoid getting errors from the
controller on disconnect.
Rather than removing the implementation of being able
to remove the data path, the function was made non-static
and moved to the internal header file, in case we ever
want to use it. This should not affect compile size.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the function from scan.c to hci_core.c.
When in scan.c, the function is only available if
CONFIG_BT_OBSERVER was enabled. Since the function
can be used in other scenarioes where we need to parse
LTV data, it has been moved to a more generic place.
hci_core.c might not be the ideal place, but it is
where most other common bluetooth functions
are located.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert CoAP unit tests to ztest API.
Additionally, replace dynamic memory allocation with a static one, to
prevent memory leaks with ztest.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When compiling existing libraries that are difficult to change, these
headers simplify the library's integration. This specifically was the
agreed upon fix for trying to compile Android's CHRE as a subsystem.
Making changes to the Android repo to use the C style includes would be
very difficult and would likely take a very long time.
Signed-off-by: Yuval Peress <peress@chromium.org>
Fix some leftovers from the pm_device_state changes.
Fixes build problem introduced in
cc2f0e9c08.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This change ensures the CPU won't get an interrupt number which is
being generated.
it8xxx2 has a limitation for interrupt vector register.
CPU may read incorrect interrupt number in ISR.
The following is an example that got incorrect interrupt number:
1. Register IVECT = 0x10. (no interrupt pending/IVECT_OFFSET_WITH_IRQ)
2. Chip INT6 interrupt occurs (IVECT = 0x16) and jump to ISR.
3. Read interrupt vector register to determine interrupt number.
4. Higher priority interrupt occurs (for example: INT158, IVECT = 0xAE)
while the CPU is reading the interrupt vector register for EC INT6,
CPU may end up with an incorrect interrupt number between 0x16 and 0xAE.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Save ra to caller saved register is wrong because it might get
overwritten after another function is called, so we fix this.
Remove clear mip register operation. (it8xxx2 supports machine-mode
only, and MEIP bit of mip is read-only).
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
__LL_RCC_CALC_HCLK1_FREQ is only available for WL and WB series,
for other series __LL_RCC_CALC_HCLK_FREQ should be used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The nRF QSPI has a configurable delay from the rising
clock signal to the actual sample point measured in
clock cycles. This commit exposes that delay as a DTS
parameter without modifying existing behavior.
Signed-off-by: Abram Early <abram.early@gmail.com>
The definition of qspi_flash_get_parameters, that implements
the mandatory get_parameters API call for the driver, was incorrectly
placed within block conditionally compiled when
CONFIG_FLASH_PAGE_LAYOUT is defined.
The commit fixes the issue that was causing compilation error
when the config has not been set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This reverts commit a6a7a0d888.
Both application and network core define the same pins for uart0.
The pins should not be used simultaneously by both cores.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
add devicetree node for usart4 and usart5. usart4 and 5
shares the same interrupt line (14), hence both can't be enabled
at the same time.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
The Bluetooth proxy feature includes proxy client and proxy server.
In addition to the proxy pdu message used above, pb-gatt also uses
the same proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service and
Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename CONFIG_BT_MESH_PROXY to CONFIG_BT_MESH_GATT.
Create an additional promptless entry CONFIG_BT_MESH_GATT_SERVER
that selects CONFIG_BT_MESH_GATT and is selected by
CONFIG_BT_MESH_GATT_PROXY or CONFIG_BT_MESH_PB_GATT.
Create additional CONFIG_BT_MESH_PROXY used to represent
proxy feature (also include proxy client).
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The Bluetooth proxy feature includes proxy client
and proxy server. In addition to the proxy pdu
message used above, pb-gatt also uses the same
proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service and
Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename CONFIG_BT_MESH_PROXY to CONFIG_BT_MESH_GATT.
Create an additional promptless entry CONFIG_BT_MESH_GATT_SERVER
that selects CONFIG_BT_MESH_GATT and is selected by
CONFIG_BT_MESH_GATT_PROXY or CONFIG_BT_MESH_PB_GATT.
Create additional CONFIG_BT_MESH_PROXY used to represent
proxy feature (also include proxy client).
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The Bluetooth proxy feature includes proxy client
and proxy server. In addition to the proxy pdu
message used above, pb-gatt also uses the same
proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service
and Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename `CONFIG_BT_MESH_PROXY` to `CONFIG_BT_MESH_GATT`.
Create an additional promptless entry
`CONFIG_BT_MESH_GATT_SERVER` that selects
`CONFIG_BT_MESH_GATT` and is selected by
`CONFIG_BT_MESH_GATT_PROXY` or `CONFIG_BT_MESH_PB_GATT`.
Create additional `CONFIG_BT_MESH_PROXY` used to represent
proxy feature (also include proxy client).
see #36343
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This commit fixes the button activity notification not working issue.
The right attribute(4) is used for the button service.
This has been tested on nucleo_wb55rg and disco_l475_iot1 platforms.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit selects LL_RCC_RNG_CLKSOURCE_CLK48 as a clock source
to rng peripheral. LL_RCC_RNG_CLKSOURCE_CLK48 is CLK48 divided by 3.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
6lowpan module can swap the original buffer with a newly allocated one
during decompression in case the decompressed header would not fit into
the original buffer. Therefore, storing the LL address offset and
restoring the pointer after decompression as it is done today is not
correct, as the new packet with decompressed IPv6 header will not
contain the LL header.
As the 6lowpan module doesn't deallocate the original buffer and
doesn't overwrite the LL header, its fine to use the original
pointers as they are.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Include the TI HDC2010, HDC2021, HDC2022 and HDC2080 temperature and
humidity sensors in the build_all test, to test the TI_HDC20XX driver.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add basic support for TI HDC20XX series (e.g. HDC2010, HDC2021, HDC2022,
HDC2080). It is able to get temperature and humidity in the default
14-bit resolution. Triggers, resolution selection, interrupt line, auto
measurement mode are currently not supported.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Activate optimizations for stm32h735g_disco which in the end
optimize the calls to ferror and fileno away.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The type used by device PM state was not changed to the recently
introduced enum type. The state is also initialized to a value distinct
from the first expected value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Kconfig option for indicating that a given SoC contains the NXP
Kinetis Reset Control Module (RCM).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Thos tests/samples are used to build any PR onl all available boards to
verify basic sanity. Having the kernel tag means they can get excluded
for random non-kernel changes causing regressions. so remove kernel tag
to keep them in all CI runs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
uart0 is used as default console output in Zephyr. Change prevents
assertion fail in default configuration of hci_rpmsg sample. The
failing assertion is related to enabling logger without backend.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
If the test is run in a board that has a network interface
enabled, then the tests might select and use wrong network interface
that is needed for the test. So this commit makes sure that
we always use the simulated network interface for the
Ethernet management tests.
Fixes#36419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
All variables for address, width and value are unsigned, so use strtoul
instead of strtol. This fixes an issue when 0xffffffff is about to be
assigned to specific address, which was truncated to 0x7fffffff so far.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Nuvoton provides different series MCU. The NPCX series has a specific
id, which can identify the real chip part number. This CL adds soc id
for the NPCX series.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
The _PrepC() function is the standard risc-v way
of zephyr entry point, so let it call the z_cstart instead
of calling this function directly.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
replaces the plain memcpy to zero the bss with
the standard zephyr function that does this task.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
by adding the soc specific files such: soc initialization code,
linker scripts and support for esp32c3 devkitm
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
hal_espressif repository was updated from esp-idf v4.2
to esp-idf v4.3 to allow latest Espressif chips integration.
As a consequence, it added a few changes in drivers
and peripherals. To maintain bisectability, changes in this
PR cannot be split. Here are some details:
wifi: update linker script by adding libphy and new attributes.
spi: update some APIs and fixed missing wait_idle check
west.yml: esp32: update hal to new version
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Configures Segger RTT and SystemView data linker sections to DTCM by
default on i.MX RT SoCs if there is a zephyr,dtcm chosen node in
devicetree. This fixes a build warning in
samples/subsys/shell/shell_module for the mimxrt1170_evk_cm7 and
mimxrt1170_evk_cm4 platforms, which don't currently have a zephyr,dtcm
chosen node.
Note that there are runtime issues with Segger RTT and SystemView on
this board that need further debug, but submitting this patch now to
address nightly CI failures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This fixes missing PPP iterable and adds all
common-rom.ld iterables.
ESP32 and esptool does not support more then 16 segments, which
blocks including common iterables section as is.
This partially reverts commit ad0bf94f77
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This adds a new Z_LINK_ITERABLE_ALIGNED option that includes
alignment.
Main reason is to avoid repeting ALIGN() calls for every
iterable needed on ESP32 linker script.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Use the actual minimum timeout used by the sample for task watchdog
channels (100 ms) as the configuration value for the fallback hardware
watchdog, to avoid unnecessary executions of the timer handler.
Add missing indentation in the documentation of the sample so that
the console output is rendered correctly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Do not use periodic executions of the timer handler, as in certain
circumstances (the fallback hardware watchdog used, one or more
task_wdt channel activated but none of them being ever fed) this
would lead to no callback/reset being executed for any channel.
Instead, schedule the next timeout from the timer handler function
when the function is executed for the dummy background channel or
for a channel that was deleted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of manually computing payload offset, let the CoAP library do
the work, and use the payload pointer returned by the
`coap_packet_get_payload()` function instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function did not work correct for packets generated with Zephyr
APIs, as `max_len` holds the entire buffer size, not the actual packet
size.
Additionally, unify how Payload Marker is handled in the calculation -
currently the coap parsing function adds it to the `opt_len` field,
which is counter-intuitive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is important that offset is set in the same manner, regardless of the
origin packet - it should indicate the final packet length in both
cases, when the packet is generated on the Zephyr side with CoAP APIs,
and when it's parsed from the UDP datagram. This allows for functions
like `coap_packet_get_payload()` to work correcty in both cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If stream socket is marked as pending close, make sure that send()
caller gets notified about it, so that application layer can decide to
stop trying to send anything more.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far send errors were silently ignored. This is okay for
UDP (datagram) sockets, as there is no guarantee that packets will
actually be sent successfully. In case of TCP (stream) stream sockets
however, application layer expects network stack to send requested data
as stream, without losing any part of it.
In case of send errors on stream sockets mark that socket to be closed
and stop sending any subsequent network packets, so that data stream
won't have any holes.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fix for Issue#35658.
Update the custom vector table to add the OS Event timer
interrupt which is used on RT685 as the kernel system timer
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
If you try to unlock an unlocked mutex, it will incorrectly
succeeds and decreases the lock count to -1.
Fixes#36572
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
This commit removes the huge if condition section and is
replaced with DT APIs to get the maximum erase time of a
stm32 flash from dtsi.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds max-erase-time element which holds the
maximum erase time of a sector or page or half-page for
all the series of stm32.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit defines max-erase-time element inside flash-controller
to be part of device tree.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Use defines for offset unit and for calculation of Periodic
Advertising window widening using clock accuracy value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix clock accuracy value used in the calculation of window
widening applied when scanning for auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Commit c045cbd336 added support for internal voltage reference source,
but in practice only the temp sensor is supported. Fix that.
Also change the code to keep the existing paths so that VREFINT and
TEMPSENSOR can be used at the same time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix i2c emulated bus initialisation code to use children of specific i2c
bus DTS node instead of first i2c bus instance.
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
Accumulator registers (ACCL, ACCH) are used on HS CPUs not only
in case of FPU usage but also in case of MPY usage. We enable MPY
for all ARCv2 HS in commit
18a24c3f6 ARC: gcc-m-cpu: use -mcpu=archs as a default for ARCv2 HS
but we didn't enable accumulator registers management.
Let's enable accumulator registers save/restore on all ARCv2 HS CPUs
by default.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ARConnect Inter-core Debug Unit (ICD) provides additional
debug assist features in multi-core scenarios. It's useful to halt
other cores when one core is halted.
Before we program ICD in master core(core 0) initial stage, add
all cores to mask. so we need to make sure other slave cores have
launched and in running mode before we enable ICD in master core.
If we launch master core first, then launch slave cores by master
core conditionally, in this scenario, it's not OK.
Let's update arc connect debug (ARConnect ICD) select mask
when new slave core come online by slave core self, instead of
use hardcoded select mask.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The patch fixes driver compile errors and ADC management for the f3x
series. It was developed and tested for the stm32f373 variant.
Tested-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
This adds power management support for the STM32WL series.
Suspend-to-idle is mapped to the three stop states (wake up from any
EXTI, including LPTIM), and soft-off can trigger either standby or
shutdown (wake up in reset).
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add the lptim1 device node definition and enable the corresponding
exti interrupt in sys_clock_driver_init().
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The current implementations of memcpy and memset are optimized for
performance and use a word based loop before the byte based loop.
Add a config option that skips the word based loop. This saves 120
bytes on the Cortex-M0+ which is worthwhile on small apps like a
bootloader.
Enable by default if SIZE_OPTIMIZATIONS is set.
Signed-off-by: Michael Hope <mlhx@google.com>
Move configuration related with BLE controller into board specific file.
That is required to allow building the sample for nRF5340 where BLE
controller is not part of the sample image.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Added a configuration of characteristic access permissions for
Bluetooth Heart Rate service.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This is a simple comments fix. This sample code is for the
"Health Thermometer Service", but at one location the comments read
"Heart Rate Service".
The change replaces "Heart Rate" with "Health Thermometer".
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
Move shared resources from m0 to common. This enable shared hardware
definition between the two cpu cores.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Rename `write_signal` to `readable` and `read_signal` to `writeable`
which are more meaningful to the actual states they represent, and make
the code analysis easier.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case read or write were called before the actual poll() call, the
poll() function was not signalled correctly about such events, which in
order could lead to a deadlock if the poll() was called with infinite
timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add unit tests which verifies that poll() function is signalled
correctly if called after data was written/read to/from a socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the ability to perform a write on the object name GATT
Characteristic with a notification callback to the application
that the name has been written.
In order for this operation to work the memory backing the
object name must be modifiable. To prevent forcing the user
to always allocate 120 bytes for the name, the maximum name
length is changed from a define to a configuration parameter.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
In case of non-recoverable errors (e.g. the connection breaks while
transmitting), the l2cap_chan_tx_process deques the net_buf but does
not unreference it. As this is inside a work queue thread, the sending
thread gets no information on this error, relying on the tx_process to
ultimately free the buffer.
Signed-off-by: Patrick Rathje <git@patrickrathje.de>
Converts the spi_nor flash driver to use `spi_dt_spec` as a
demonstration of the simplifications that the API enables.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add helper functions to simplify the usage of `struct spi_dt_spec`.
Implements helpers for the standard synchronous calls (transceive, read,
write).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Introduces the `struct spi_dt_spec` type, which contains the complete
SPI bus information derived from devicetree. It serves the same purpose
as `struct gpio_dt_spec` in that it can be constructed automatically in
`DEVICE_DT_INST_DEFINE` macros and provided as a single handle to SPI
API calls. Includes a single function, `spi_is_ready` that validates all
SPI bus dependencies are ready.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Replace device_get_binding() with DEVICE_DT_GET to obtain the PS/2
controller and clock control device objects. It helps to improve the
efficiency for driver initialization as DEVICE_DT_GET is processed
at the link time rather than run time.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The PS/2 module in npcx provides a hardware accelerator mechanism
including an 8-bit shift register, a state machine, and control logic
that handle both the incoming and outgoing data. The hardware
accelerator mechanism is shared by 4 PS/2 channels. To support it,
this CL separates the PS/2 driver into channel and controller drivers.
The controller driver is in charge of the PS/2 transaction. The channel
driver is in charge of the connection between the Zehpyr PS/2 API
interface and controller driver.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Added api call that can set a callback that is called whenever
data is received on shell. When callback is set, shell processing
is bypassed and data is passed to that callback.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit changes the entry referencing the hal_stm32 module
into west.yml. This brings in the asserts feature from stm32cube
hal/ll and zephyr.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds the asserts symbol in Kconfig to enable/disable
asserts functionality for stm32 series. These would be used in
stm32cube hal & ll drivers.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Promote the "edac mem" shell subcommand to a generic "devmem" root shell
command. This command is useful for poking around registers and memory
outside of the EDAC drivers.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit configures DAC sample application using overlay to
build and run on nucleo_l552ze_q platform.
This has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures DAC sample application using overlay to
build and run on stm32l562e_dk platform.
This has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Fix an auxiliary scan context leak when initiator
establishes a connection while there is another pending
auxliary PDU scheduled to be received. In this case, the
pending auxliary scan LLL context does an early abort
without generating a scan aux done event. Missing scan aux
done event caused the auxiliary scan context leak.
Fixes#36131.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit fixes an issue where bt_mesh_reset() call just erases all
mesh flags set at the initialization instead of restoring them and
thus disabling some features until the board reboot.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Network test cases are designed for emulated
environments so add platform_allowed filter to
only allow qemu platforms.
Fixes: #36418
Signed-off-by: David Leach <david.leach@nxp.com>
This will fix a bug caused by creating a multi instance resource with
only a single resource. Previously this was treated as a single instance
resource. This is now properly treated as a multi instance resource with
one instance
Signed-off-by: Markus Rekdal <markus.rekdal@nordicsemi.no>
rv32m1_vega don't boot due to device init ordering and changes with the
device model. The soc code is looking for a device pointer for the
intmux. Change to using DEVICE_DT_GET here as that will ensure we get
a valid pointer and by the time we need to utilize the pointer the
intmux driver will have been initialized and thus the device pointer
will be ready.
Also set BUILD_OUTPUT_HEX since we utilize openocd to flash and west
flash is looking for a hex file for openocd targets.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a work in progress initial submission for the
Microchip MEC172x family SoC. This submission does
not contain all header files or power management.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The ARConnect Inter-core Debug Unit (ICD) provides
additional debug assist features in multi-core scenarios.
In master core(core 0) initial stage, we will program ICD to halt
all other cores based on a halt occurring in one ore more core.
And all cores are in halt mode on reset, so we need to make
sure other slave cores have launched and in running mode
before we enable ICD in master core.
Currently we launch master first, Let's reverse the launch
order, launch master last, to make sure slave cores have
launched before we program and enable ICD.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Rename the top-level header file from <canbus/canopen.h> to
<canopennode.h>.
Rename CANopenNode related Kconfig options from CONFIG_CANOPEN* to
CONFIG_CANOPENNODE*.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the Zephyr-specific interface and support code for CANopenNode into
the modules directory. Consolidate the CMakeLists.txt files into one.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Minor update to calls to get Tx chain delay in extended
advertising and scanning to use S8 encoding delays.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We need to take RX chain delay and PHY used to receive
CONNECT_IND into account when calculating 1st connection
event offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the Tx to Rx switch, fix the delay which should be the
Rx ready delay plus the Tx chain delay and plus 4 us active
clock jitter compensation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor cleanup of the implementation of mutual exclusion
of LE Connection Parameter Request amongst active
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a sample that demonstrates how to transfer a periodic
advertising sync from a device to another device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a sample of using (in this case subscribing) to periodic
advertising sync transfer (PAST).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Using helper functions decreases function complexity numbers reported
by static code analyzers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Check errors returned by edac_ecc_error_log_clear() and
edac_parity_error_log_clear().
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use only boolean in if conditions as new coding style implies for edac
API header file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove #ifdefs making code cleaner and including error injection API
functions to documentation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor EDAC API making it more clear, removing unneeded typedefs and
using check for optional and assert for mandatory APIs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Order the subsystems in the manifest file alphabetically, as they
actually should be according to the comment within the manifest file.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
In drivers/sensor/CMakeLists.txt, we have various lines like this:
add_subdirectory_ifdef(CONFIG_FOO foo)
Then drivers/sensor/foo/CMakeLists.txt says:
zephyr_library()
zephyr_library_sources_ifdef(CONFIG_FOO foo.c)
This is redundant; the foo/CMakeLists.txt won't be added to the build
system unless CONFIG_FOO=y in the first place, so there's no need for
extra boilerplate testing it again.
Remove all these unnecessary instances in each sensor driver's
CMakeLists.txt using this pattern:
zephyr_library()
zephyr_library_sources(foo.c)
In a couple of places, the '.c' extension is missing. Add them in for
consistency when that happens.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The eager_only is currently breaking the usage of the `.. only``
directive, so remove it. Documentation seems to build fine without it,
so it has been removed for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Bluetooth Mesh Vendor model hava company id field.
Accordin MeshPRFV1.0.1 3.7.3.1 Operation codes.
The 3-octet opcodes are used for manufacturer-specific opcodes.
The company identifiers are 16-bit values defined by the
Bluetooth SIG and are coded into the second and third octets of
the 3-octet opcodes.
Therefore, we can speed up the search process by checking whether
CID fields match, rather than comparing opcodes one by one.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Reserve a minimum node rx of 2 that can happen when local
central initiated PHY Update reserves 2 node rx, one for PHY
Update complete and another for Data Length Update complete
notification. Otherwise, a peripheral only needs 1
additional node rx to generate Data Length Update complete
when PHY Update completes.
Relates to #36381.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the post decrement in loop's conditional into
explicit decrement inside the loop so as to avoid
decrementing the maximum count without enqueueing free rx
buffers into the free rx buffer MFIFO.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add new custom transport type.
This allows user defined transport for MQTT communication.
The user must implement the transport procedure.
Fixes **#27015**
Signed-off-by: Vlad Tuhut <vlad.tuhut@raptor-technologies.ro>
This commit fixes the issue with a compilation of the sample that
uses printk function from cpp code when LOG2 is used and printk
is handled by logging subsystem.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Standard Arduino CLK signal is on D13,
nucleo_l476rg board has been modified accordingly.
Need an overlay to use default x_nucleo_idb05a1 spin D3 (PB3)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Move uart/usart pinctrl to common file.
Set status in dedicated m7 or m4 file.
But only one core can control a peripheral instance.
Arbitrary default choice:
usart1 --> m7
uart8 --> m4
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
RXTO event is generated always after ENDRX and driver relies
on assumption that ENDRX event is handled before RXTO. However,
when interrupt is preempted after ENDRX check returned false
and RXTO event is already set handling order would be swapped.
Added addtional check to handle RXTO event only if ENDRX is not
set. If ENDRX is set, it means that it is not yet handled. RXTO
event is not cleared and interrupt will be triggered again and
ENDRX event will be handled first.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The lis2dw12 sensor can generate the TAP interrupt only on INT1,
while DRDY can be generated on both. The int-pin DT property
specifiy on which pin the DRDY (and not the TAP) can be generated.
This commit fix the way the trigger is set: first the driver checks
the trigger type (DRDY or TAP), then it uses the int-pin information
only in DRDY case but allows setting TAP regardless of int-pin (it
always routes it on INT1).
The previous code was first checking int-pin: if it was INT2 then
the driver refused setting TAP triggers.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit aligns lis2dw12 sensor driver to latest multi
instance sensor driver model.
In particular it makes use of the stmemsc common routines
and move ctx handler inside struct config, so that the
bus_init routines can be totally avoided.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Remove all odr values from Kconfig and always init it
at 12.5Hz. It is responsibility of application to set
the rate to a different value using SENSOR_ATTR_SAMPLING_FREQUENCY.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move lis2dw12 trigger pulse configurations from Kconfigs to Device Tree.
Moreover the dts properties have been renamed as 'tap', which sounds a
better name to immediately catch the feature behind it. Since tap
threshold cannot be zero, this value (which is the default in dts
binding) is used to enable/disable the device feature per each axis.
The event can be generated on INT1 only.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use gpio_dt_spec structure (and related APIs) in config for configuring
the gpio used for drdy and pulse interrupts.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Create a common binding file that will be included by all bindings
handled by lis2dw12 driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a device node for the FMC controller found in stm32f427, f437 and
f446 devices, works fine with the current memc_stm32_sdram driver.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Default the option MEMC_STM32 to "y" when the device node is defined and
enabled, so that the driver is selected automatically when the board
supports it and MEMC is enabled.
Remove the default conditional on serise as it's redundant with the one
in soc/arm/st_stm32/common/Kconfig.defconfig.series.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add support for RT1170. The fuse register that holds
the unique device ID is different as compared to the
RT10XX series
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Added RT10xx and RT11xx configs
2. Added a new soc file for rt117x. There are clock differences
between the RT10xx and RT11xx series, hence the soc files
have been separated.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Direct openthread API usage requires explicit locking,
which is also used internally.
Exposing a work queue through the openthread context allows
work to be submitted without the need to block other threads.
In particular with CONFIG_OPENTHREAD_MANUAL_START, application
logic can offload work which otherwise would need to wait for
the lock to become available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit resolves warning ARM_MPU & HW_STACK_PROTECTION
during build. The MCU in STm32_Mini_dev (black & blue) has
no MPU support, but MPU was still enabled in defconfigs which
was the reason behind warnings. This commit removes
ARM_MPU & HW_STACK_PROTECTION from defconfig for both
STm32_Mini_dev development boards.
fix: zephyrproject-rtos/zephyr#36408
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
The hci_le_remove_cig command shall only be sent as the
master/central. Implemented this by early termination in
bt_iso_cleanup as the slave/peripheral.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
coap_response_received returned NULL if the observe option was out of
order, however it makes more sense to return the coap_reply handler
without actually calling it.
Additionally the reorder check has been modified to partially match
the RFC.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new extension to support the :kconfig: role and .. kconfig::
directive. This removes the need of using :option:.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF5 802.15.4 driver tries to establish a rpmsg channel
with the network core, so the network core must be started
earlier. Therefore, decrease the priority level of the task
responsible for initializing the board.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
- bugfix: Accept initial tftp server reply from a port different than
the one used to establish the connection (typically 69) as mandated
by RFC 1350. Previous implementation was not standard compliant.
- bugfix: close socket in case of error or timeout.
- bugfix: Reset retransmit counter after receipt of a good packet.
- bugfix: Use CONFIG_TFTP_LOG_LEVEL to set log level.
- api: upon successful receipt of the file set `client.user_buf_size`
to the size of the file received.
- Restructure the code, comments.
- Limit usage of global variables.
- Limit usage of `goto`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The purpose of this PR is to automatically test the
host in the native environment.
It is used to simulate /dev/tty*, can replace by /dev/pts/*.
Also, device log will be output to stdio by default.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
UART CR_SIN interrupt enable/disable are invoked when CONFIG_PM enable.
This removes the guard for UART CR_SIN interrupt enable/disable to fix
the build issue.
Fixed#36520
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
bits property indicates the number of in-use slots of available slots
for GPIOS. We have a similar property ngpios in gpio-controller.yaml,
we will use ngpios to calculate port_pin_mask. Let's remove bits and
only use ngpios.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Enable Instruction Cache
Warning: no flash driver yet available for STM32l5
But cache coherency management (cache invalidate)
will be rerquired when implementing flash driver.
ICAHE must be disabled for any flash write opeartion.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Enable Instruction cache accelerator for Cortex M4
first 1MB of Flash.
As per Reference Manual: no need for cache coherency management
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Similar to #32218 and #34032
Flush ART cache before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Similar to #32218 and #34032
Flush ART caches before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Not enough time to review changes in these subsystems.
Propose to have VenkatKotakonda as KSCAN subsystem owner instead.
Adding SoC-specific driver owners.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This implement the same flush cache functionality already present in the
other stm32 series flash drivers, used to avoid bus errors when writing
big chunks of data to the flash.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The flash_stm32l4x driver seems to work out of the box on the WL series.
This just adds the necessary config changes to let the driver build and
run when SOC_SERIES_STM32WLX is selected.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Increase the storage partition size to 16kB, 8x2kB pages. This makes the
default config usable for testing subsystems that need multiple pages.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Fix peripheral maximum transmit time, maximum receive time
and radio event length time reservations when connection
established using Extended Advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix central maximum transmit time, maximum receive time
and radio event length time reservations when connection
established using Extended Advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the temperature is lower than 20C, adc_temperature is smaller than
(data->t_ref << 8), which should yield a negative value for dT. While dT
and adc_temperature are correctly declared as signed, the subtrahend is
wrongly casted to unsigned, yielding insanely high temperature values.
Fix that by casting it to int32_t instead of uint32_t.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have some static variables var, zeroed_var and bss_var
in mem_partition.c and we only assert the value of them in
the same file, so the compiler may pre-calculate it in compile
stage, it's fine usually.
But for variable zeroed_var (= 20420), we force to put it in bss
section in link stage, the value will change in bss clean stage, so
we will get a wrong result.
Let's add volatile for these variables to disable pre-calculation.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This change has more detail about providing the I2C peripheral
device's address to help pinpoint any issues that are device
specific and not bus specific.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Use DEVICE_DT_GET instead of device_get_binding to obtain the controller
node, so that the device address gets resolved at link time.
This means we can move the pointer form the data to the config
structure, and get rid of the data structure and associated boilerplate
entirely.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert the various device_get_binding() calls used to get the device
clock node to use DEVICE_DT_GET. The latter is processed at link time,
so it should be a bit more efficient.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
After #35702, the provisioner is unable to mark a link as closed, as
it depends on the send_end callback to be called, so it can start its
timer. PB-Adv keeps a reference to the buffers of reliable messages,
which prevents this callback to be invoked, as the buffer destructor is
never called.
Move scheduling of the retransmit timer to the initial transmission, and
replace the timer based LINK_CLOSE message tx duration with a message
counting solution.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Found out that ITE IT8XXX2 series board image is not displaying
properly. In the original doc page of the RISC-V ITE IT8XXX2 series
board image is shrinked.
Fix resolution to display image properly.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Instead of explicity ORing together the compatible drivers,
CAN_RX_TIMESTAMP now depends on CAN_HAS_RX_TIMESTAMP
which is selected by the drivers primary Kconfig option. In addition,
stm32fd does not need to select this option since it selected by
the underlying M_CAN driver.
Signed-off-by: Abram Early <abram.early@gmail.com>
Essential type of LHS operand (64 bit) is wider than essential
type of composite expression in RHS operand (32 bit).
LHS "t" variable is 64 bit, and RHS (from_hz / to_hz) is 32 bit.
Cast RHS composite expression to the uint64_t type.
Found as a coding guideline violation (MISRA R10.7) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add power management support to STM32L0 series.
The SoC have a single stop state that can be used with LPTIM as a system
timer, as well as a standby mode where the system resets on exit.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The stm32_lptim driver is hardcoded to use lptim1.
Make the Kconfig option depend on the presence of the node label in the
devicetree, so that there's one less list of supported SoC to keep track
of.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add the code owner entries for all files related to the Xilinx GEM
Ethernet device driver.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
The NXP LPC syscon driver failed to build on several platforms for
various reasons. We need dts support on LPC55s1x and LPC55s2x, the
driver doesn't seem like it will work on LPC54114 so we exclude it
there for now.
Additionally, fix a dtc warning on LPC55s6x based on unit-address in
the node naming needing to be lowercase.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove includes from the tag file. If we have a change to an include
that implies some API change which may show up somewhere else so we
want to build as many tests/samples as possible in that case.
Also added a comment about keeing entries sorted alphabetically.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide mapping from cy8ckit_062_ble to Arduino-R3 headers.
The pins can have multiple functions that may interfere with
GPIO and/or communications.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Remove the bt_conn pointer from the AICS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Initializes proxy_send's attr pointer, which in theory could be
uninitialized if neither gatt proxy or PB GATT is enabled while proxy.c
is enabled.
This scenario is not really possible with the current kconfig structure,
but is reported as a potential error by Coverity, and should be fixed
for future proofing purposes.
Fixes#36314.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The openthread initialization in turn calls platform specific
functions, lock the API during this step.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The mute_val pointer could be NULL when dereferenced in the
callback. Change to be a simple value which is just assigned
instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In dt_label_with_parent_compat_enabled, it maybe that there is
no node matching expected label.
In this case don't generate error, but return False.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert pin setting and getting to `struct gpio_dt_spec` variants to
demonstrate usage of the new API.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add helpers to allow providing a `struct gpio_spec_dt` directly to
`gpio_pin_get`, `gpio_pin_set` and `gpio_pin_toggle` functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a function for the VCS client that gets the bluetooth
connection pointer if a given VCS client instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the VCS API to use the bt_vcs struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change to use the generic bt_vcs struct instead of the bt_vcs_client
struct, to align better with the future API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the type of the vcs_inst in vcs.c to bt_vcs instead
of bt_vcs_server to align better with the future API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_vcs_discover so that a client
will get a bt_vcs pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_vcs struct that represents a VCS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the MICS API to use the bt_mics struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change to use the generic bt_mics struct instead of the
bt_mics_client struct, to align better with the future
API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the type of the mics_inst in mics.c to bt_mics instead
of bt_mics_server to align better with the future API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_mics_discover so that a client
will get a bt_mics pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_mics struct that represents a MICS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The parser module collides with a module in python called parser.
Doesn't seem to be a problem in Linux but for some reason the
search/include order in Windows causes python to import the wrong
parser. The change is to rename the module to dictionary_parser
to avoid the name space collision.
fixes: #36339
Signed-off-by: David Leach <david.leach@nxp.com>
- Coverity think it is out-of-bound writing
because the codes write two bytes to address (&hdr->length)
that hdr->length is uint8_t. Coverity doesn't think about
the one more byte after the hdr->length.
- Use net_buf_push to resolve this issue.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
The test case part in test_arm_interrupt, which is
triggering a SysTick IRQ (when SysTick is not used
for system timer implementation), to catch a spurious
interrupt is not really testing what it is designed
for. The reason is that the z_arm_exc_spurious has
be re-designed to be invoked only if the kernel is
built without support for system clock, i.e. with
CONFIG_SYS_CLOCK_EXISTS=n, but this configuration is
not compatible with ZTESTs and is, therefore, never
tested in this test, in any configuration. When the
SysTick is not implemented in the HW, it is not
possible to set the PendSTSET bit, so this is not
possible to execute this part of the test case, anyways.
What we have been catching as an error, here, is the
ASSERT in the sys_clock_isr() weak implementation, but
asserts are verified earlier in this test case, so this
part is really redundant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an explanation comment, so no one in the future
will try to change that part of the code.
Add parasoft tags to suppress a violation in static analysis tool
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
I cannot invest the time required for maintaining the networking
stack anymore, so I am stepping down from the maintainer role.
I am proposing Rober Lubos to be a new network maintainer.
I have been working with him for several years, and he is always
very helpful and knowledgeable to review and comment patches and
issues. He knows the network stack well and will for sure be able
to handle the task as he has been doing the maintenance already
for a long time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: Robert Lubos <robert.lubos@nordicsemi.no>
The document build system has been complaining about use of
no longer existing Kconfig option.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The following options, marked to be deprecated in release 2.5, have
been finally removed from Kconfig:
FS_LITTLEFS_FC_MEM_POOL_MIN_SIZE
FS_LITTLEFS_FC_MEM_POOL_MAX_SIZE
FS_LITTLEFS_FC_MEM_POOL_NUM_BLOCKS
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The LittleFS file cache has been completely switched from k_mem_slab
to heap allocated. The *_MEM_POOL_* kconfig variables no longer
affect the code.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added notify_timeout_cb to struct lwm2m_ctx to allow application to
handle notify timeout
Added lwm2m_rd_client_update to lwm2m.h to allow application to
trigger registration update
Added notify_message_timeout_cb which calls notify_timeout_cb from
struct lwm2m_ctx and logs an error message
Fixes#31499
Signed-off-by: John Power <john.power@xylem.com>
The code depends on the order of evaluation 'z_x86_check_stack_bounds'
function arguments.
The solution is to assign these values to variables and then pass
them in.
The fix would be to make 2 local variables, assign them the values
of _df_esf.esp and .cs, and then call the function with those 2 local
variables as arguments.
Found as a coding guideline violation (MISRA R13.2) by static
coding scanning tool.
Change "int reason" to "unsigned reason" like in other functions.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
With 64 bytes heap and 1 byte allocation on a big heap, we get:
0 1 2 3 4 5 6 7
| h | h | b | b | c | 1 | s | f |
where
- h: chunk0 header
- b: buckets in chunk0
- c: chunk header for the first allocation
- 1: chunk mem
- s: solo free header
- f: end marker / footer
max_chunkid() was returning h->end_chunk - min_chunk_size(h), which is
5 because min_chunk_size() on a big heap is 2. This works if you
don't have the solo free header at 6 and the heap is like:
0 1 2 3 4 5 6
| h | h | b | b | c | 1 | f |
max_chunkid() in this case gives you 6 - 2 = 4, which is the right
chunkid for the last chunk header.
This commit replaces max_chunkid() with h->end_chunk and "<=" (less
than or equal to) with "<" (less than), so that it always compares
against the end maker chunkid, but the code won't touch the end maker
itself.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
sometimes ninja fails to launch qemu, the sub-thread
can't read anything from qemu pipeline, then the
corresponding testcase will timeout. Then the
sub-thread will get blocked if it call join()
set terminate as the Handler's method, then
Handler's children class can call it
Signed-off-by: Jingru Wang <jingru@synopsys.com>
This commit clears current settings of the PWM perihperal
that are stored inside device structure.
This makes sure that PWM period and prescaler is configured
as expected after driver was suspended.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
NPCX WIMU CR_SIN is used to wake up soc from NPCX sleep power state.
The wake-up IRQ enabled when UART init. It causes the wake-up IRQ to
generate many extra interrupt events, which causes the system too busy
to handle other events. This PR moves the UART wake-up IRQ enabling
from UART init to npcx_power_enter_system_sleep() to avoid the
interrupt storm.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Set the defalut value of SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option
from the Device Tree. The `clock-frequency` property of the DT cpu@0
node is a single source of truth defining the CPU frequency. This is
the value used e.g. by all Atmel drivers.
For Atmel SAM family CPU clock is currently the only supported system
clock source. Ensure that kernel understanding of the hardware clock
frequency is the correct one.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add flash driver for it8xxx2. The driver can implement
flash read, write and erase that will be mapped to the
ram section for executing.
TEST="flash write 0x80000 0x10 0x20 0x30 0x40 ..."
"flash read 0x80000 0x100"
"flash erase 0x80000 0x1000"
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
According to the rule MISRAC-2012 21.4.b the standard header
file <setjmp.h> shall not be used. Suppress it, because it raises
violation in a testcode, not in a runtime code.
Tag suppresses reporting of violation for the current file,
starting from the line where the suppression is located.
Found as a coding guideline violation (MISRA R21.4.b) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Demonstrate use of bt_gatt_find_by_uuid in peripheral sample. This
avoids the magical array index.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Expose a helper function to the application that searches the local
database for the given attribute from its UUID.
Provide arguments to limit the search that matches the service
declaration to make it easy to limit the search to a specific service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow to pass attribute as NULL pointer when using notify or indicate by
UUID. This will use the entire handle value range to search for an
attribute with a matching UUID.
Document optional parameters, and clarify attr and uuid usage in the
variable declaration in the struct for clarification.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since we now have separate Kconfig symbols for the different
MPS2 AN521 board variants, we need to update the BOARD switch
for the TF-M target on MPS2 AN521.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A major update to the MPS2 AN521 build instructions, covering
building with TF-M for CPU0 and building for CPU1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introduce the fpu tag to tests that explicitly enable
the FPU and FPU_SHARING Kconfig options. The tag could
be used to run all FPU-related tests in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable testing Arm architecture and Kernel unit tests on
the mps2_an521_remote platform, with CONFIG_FPU and
CONFIG_FPU_SHARING enabled. This is done by enabling the
arm and fpu tags on the mps2_an521_nonsecure board target.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When we are building applications with openAMP on CPU1, we do not
need to trigger a build an empty binary for CPU0, as this will be
take care of by the dual core sample anyways.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a project to build an empty binary for AN521 CPU0,
which will only serve to wake up CPU1, and let samples,
and tests to execute as standalone applications in CPU1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add an option to build a CPU0 image, when we are building
applications for AN521 CPU1 core. This image will be an empty
binary that will basically boot the device and wake up CPU1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Select Kconfig option SOC_MPS2_AN521_CPU0 in board
definitions of MPS2 AN521 targets which build on
CPU0 of the MPS2 AN521. This is the case for the
mps2_an521 and mps2_an521_nonsecure targets.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
MPS2 AN521 is a dual (Cortex-M33) core where the two cores
have different capabilities. E.g CPU0 implements TrustZone-M,
while CPU1 implements the FPU. Therefore we introcude separate
Kconfig symbols for the two SoC variants, and use these to
select the different Cortex-M capabilities. We also update
the definitions of __MPU/FPU/SAU/DSP variant in soc.h to make
them get the value from the Kconfig settings, directly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With respect to the mapping between the CPU variant
and the FPU we add an entry for Cortex-M v8-M CPU
variants without DSP. This should cover the case
of a Mainline Cortex-M which implements the Floating
Point extension but not the DSP extension.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current CMakeLists.txt contains a function that is called from
the same file.
This patch removes the abstraction, allowing to remove many
lines of parameter handling.
Additionally, with this patch, the Cmake argument handling is now
done via a list, which removes many more named variables.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Adding support for beagleV Starlight board based on Starfive JH7100
SoC. It's a base support, no drivers other than uart has been tested.
Signed-off-by: Rajnesh Kanwal <rajnesh.kanwal49@gmail.com>
Increase the ticker operations count in ULL high context
when Extended Advertising Connection Establishment on Coded
PHY is supported.
This fixes assertion in Controller when initiating a
connection on Coded PHY, wherein two scan instance ticker,
one window stop ticker, and a new connection instance
ticker operations needs to be enqueued.
Relates to commit a6b8eba7c5 ("Bluetooth: controller:
Implement disabling the other PHY initiator").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed.
Add a comment to the empty default case.
Add a LOG_ERR to the default case.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The atmel pwm driver doesn't have a easy way to test and show
functionality to users. This re-assign led-0 function from
gpio-leds to pwm-leds. The current led-0 entry at gpio-leds
was keep with status disabled, as refence. It allows test pwm
driver for SAM Cortex-M7 MCUs. The led-1 assume Zephyr sample
default led0 alias.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit fixes diag repeat command port by fixing issue with
incorrectly handled repeat timer.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit enables soc-flash support in disco_l475_iot1
only for flash test. Using overlays, it adds soc-flash storage
partition and deletes qspi-flash storage parition for
flash test. Both flash test and spi_flash application
has been tested on disco_l475_iot1 platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit changes from upper case to lower case in
"reg = <0x000D8000 DT_SIZE_M(7)"
"reg = <0x00000000 0x000D8000>"
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add a new Kconfig option, BT_ISO_UNICAST, to make it possible
either configure unicast only, broadcast only or both.
This results in some code being moved, but not modified, and
should not effect anything.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit enables soc-flash support in stm32f746g_disco only for
flash test. Using overlays, it adds soc-flash storage partition and
deletes qspi-flash storage partition for flash test. Both flash test and
spi_flash application has been tested on stm32f746g_disco platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Python is used by the west meta-tool as well as by many scripts invoked
by the build system. It is easy to run into package incompatibilities
when installing dependencies at a system or user level. This situation
can happen, for example, if working on multiple Zephyr versions at the
same time. For this reason, the getting started guide has been updated
to offer instructions for both, using Python virtual environments and
installing globally. Python virtual environments has been added as
another choice for the reasons just mentioned.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Function used for filtering "dt_compat_enabled_with_label" was not
working as expected as it was not taking into account that we're
looking for a children/parent combination:
Provided "compat" with enabled status should be the one of the parent
of the node matching given label.
Function is then reworked to take this into account.
And to make it's usage clear:
- function name is changed to be clearer on the intention
- args order is reversed to be more logical wrt the intention
Users of the function are also updated to take the change into
account.
Fixes#36093
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the device tree data for the 4 Ethernet controllers integrated into
the ZynqMP SoC, GEM0 to GEM3.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Add support for the Xilinx GEM Ethernet controller, which is integrated
in both the Xilinx Zynq and ZynqMP (UltraScale) SoC families. The driver
supports the management of a PHY attached to the respective GEM's MDIO
interface.
This driver was developed with ultimately the Zynq-7000 series in mind,
but at the time being, it is limited to use in conjunction with the
ZynqMP RPU (Cortex-R5) cores. The differences are minor when it comes
to the adjustment of the TX clock frequency derived from the current
link speed reported by the PHY, but for use in conjunction with the
Zynq-7000, some larger adjustments will have to be made when it comes
to the placement of the DMA memory area, as this involves the confi-
guration of the MMU in Cortex-A CPUs.
The driver was developed under the qemu_cortex_r5 target. The Marvell
88E1111 PHY simulated by QEMU is supported by the driver.
Limitations currently exist when it comes to timestamping or VLAN
support and other minor things. Those haven't been implemented yet,
although they are supported by the hardware. In order to be fully
supported by the ZynqMP APU, 64-bit DMA address descriptor format
support will be added.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
This CL introduces six properties, clock-frequency, core-prescaler,
apb1/2/3/4-prescaler in pcc (Power and Clock Controller) node to
configure clock settings. It also removed the original Kconfig options
used for the same purpose.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
In npcx series, we use ITIM64 as system kernel timer. Its source clock
frequency must equal to CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC. This CL
added check during initialization to prevent ambiguous condition.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Rename OSC_CLK as OFMCLK to meet npcx datasheet. The Oscillator
Frequency Multiplier Clock (OFMCLK), which is derived from
High-Frequency Clock Generator (HFCG), is the source clock of cortex-m4
core and most of NPCX hardware modules.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
There is a small window between when socket is created and
before it is bound to a local address, where the local address
pointer might be NULL.
Fixes#36276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a paragraph to mention git bisect as a way to pre-analyze
regressions.
Aim is to reference this section from github issues when regressions
are reported and encourage users to do this first round of
pre-analyzis
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
it need to be a && between two condition, to satisfy
the comment: only 12 / 13 bit resolution is supported,
if FSL_FEATURE_LPADC_HAS_CMDL_MODE is not defined. not
using ||.
Signed-off-by: Crist Xu <crist.xu@nxp.com>
We should gurantee that we do not use SRAM during Zephyr early
boot, until SystemInit has returned. This commit aims to ensure
that SystemInit will be branched to, without first pushing args
to stack, even when no optimizations are selected. We chose to
define z_platform_init in assembly directly (instead of using
inline assembly) as it appears to be a cleaner design.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use a common implementation for z_platform_init
in nRF SoC family. The implementations are
identical, so no need to maintain separate
identical versions of them. The commit does not
introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since we are writing a register it makes more sense for the type
to be unsigned. This hopefully address a compile warning we get
with clang:
error: implicit conversion from 'int' to 'int16_t' (aka 'short')
changes value from 32768 to -32768 [-Werror,-Wconstant-conversion]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we only build on native_posix, we can build all the sensors
together in one pass. This makes it easier to manage the conf files
going forward.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver build_all tests only need to build a driver once and
so limit the sensor tests to only build on native_posix.
We tweak CONFIG_SYS_CLOCK_TICKS_PER_SEC as part of this change as
hp206c requires this setting to build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If CONFIG_ICM42605_TRIGGER is not set the driver doesn't build. There
are a few places that need ifdefs based on CONFIG_ICM42605_TRIGGER for
the driver to build correctly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
BT_DEVICE_NAME_MAX can be up to 248 bytes. This may exceed ATT MTU size,
which will cause the offset in write_name() to be non zere, resulting in
BT_ATT_ERR_INVALID_OFFSET. However, device name should be writable up to
it's defined size, using subsequent prepare write requests. Error should
be returned if offset exceeds size of device name, and if total size of
new value exceeds BT_DEVICE_NAME_MAX, BT_ATT_ERR_INVALID_ATTRIBUTE_LEN
shall be returned.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This commit enables emulation of the `mps3_an547` platform
using, by default, The Arm Corstone-300 MPS3 FVP executable.
This FVP includes support for emulating the Ethos-U55 NPU.
Optionally, the default FVP selection can be overriden in favor
of QEMU, which supports the MPS3 without the proprietary
Ethos-U55 FPU extension. To enable qemu as an emulation target,
add `-DEMU_PLATFORM=qemu` when building an mps3_an547 image.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Configured UART/UARTE input pins to have pullups. Otherwise when
uart is disconnected pins are floating and generate receiver
errors.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit enables iwdg support for stm32l562e_dk platform in
device tree. This has been tested on stm32l562e_dk platform with
tests/drivers/watchdog/wdt_basic_api and samples/drivers/watchdog.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit fixes the compilation warning occurred due
to usage of upper case in "interrupt-controller@4000F400".
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add GPIO_flag values for GPIO DTS creation that
allows for pins that do not use the default
voltage. IT8xxx2 supports setting voltage
levels for each pin. The default for this SoC
is 3P3 but they can be set individually to
1P8.
This will be used, for example:
i2c_c_scl {
gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
enum-name = "GPIO_I2C_C_SCL";
label = "I2C_C_SCL";
};
Signed-off-by: Denis Brockus <dbrockus@google.com>
TCP unacked_len can be set to zero in tcp_resend_data(),
and then be minus by len_acked when ACK is received,
resulting in a negative unacked_len value.
Fixes#36390
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
- Fixed some incorrect streamport references that pointed to the
base streamport files instead of those dedicated for Zephyr.
- Updated the source file compilation to match the updated
TraceRecorder module.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The definition of the STM32_LSE_CLOCK is given by the
drivers/clock_control/stm32_clock_control.h
to the hci/ipm_stm32wb driver
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit adds PWM support in dtsi for stm32l5 series. Adding
other timer nodes for different stm32l5 series PWM capability.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Add the I2C version of the MS5607 (the SPI version was already enabled)
so that it gets compiled tested.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add multi-instance support to the MS5607 driver. This is needed to
easily add I2C support later. It also simplifies a bit the driver
initialisation by using more static values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
axis1bit16 and axis3bit16 unions are no longer used
and can be deleted from all .h files that are referencing
them.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Reprocess keyscan event processing in case of an I2C bus read
error. Otherwise, the HT16K33 will be stuck (when used in IRQ mode, not
in polling mode) and no new IRQs will be delivered.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Convert the keyscan portion of the Holtek HT16K33 driver to adhere to
the kscan API instead of the GPIO API.
When this driver was introduced the kscan API was not present. The
keyscan driver was therefore implemented as a GPIO interrupt driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The was a missing comma in the DEVICE_DT_INST_DEFINE macro and the
SAME71 HAL tweaks the name of a struct so we have to work around that.
Fixes#36095
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Increase main and system workqueue stack sizes to avoid overflows
as the LoRaMac-node library is quite stack-hungry.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Update the LoRaMac-node library to the last stable release and fix
the Zephyr glue code to match it. Move CMakeLists.txt to the main
Zephyr repository to simplify loramac-node module maintenance.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Modify the check from checking the feature bit to
checking the command bit. This ensures that we
don't send the read buffer size V2 to a controller
that does not support it.
This also moves the entire ISO init procedure into
a separate function to avoid having a large
ISO-only block in `le_init`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a mention of the Kconfig hardening script hardenconfig to
the Kconfig documentation to promote awareness of its existence.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This commit removes a superfluous null pointer check.
The device is accessed via a label.
so in case it is not available a build error arises,
but the pointer won't ever be null.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This check is present in att_read_rsp(), but att_read_mult_req and
att_read_mult_vl_req do not use it. Add this check to these functions.
This was affecting GATT/SR/GAS/BV-08-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Make kscan init priority higher, since it is lower than some buses like
I2C, making some devices to fail initialization if not tuning
priorities.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow caller to specify microsecond accuracy and not convert
to milliseconds.
Fixes#36072
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make zsock_select() a syscall so that the following commit
can call the internal poll implementation directly. This is
needed as zsock_select() will not call zsock_poll() directly
in order to allow select to use microsecond timeout accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
GPIOTE1 on the nRF5340 SoC is always accessible as a non-secure
peripheral. However, it is only defined in the non-secure DTSI file.
This is therefore a missing node in the secure DTSI file, since
non-secure addresses are accessible by secure software.
Move the node definition to a common include file and pull it into the
app core DTSI as well. To keep things clean, adjust the node labels so
that:
- 'gpiote0' and 'gpiote1' are defined in the secure DTSI
- 'gpiote0' is not defined in the non-secure DTSI
- 'gpiote' is defined in both secure and non-secure DTSIs
- 'gpiote' refers to the same node as 'gpiote0' in the secure DTSI
- 'gpiote' refers to the same node as 'gpiote1' in the non-secure DTSI
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The sram1 node in nrf5340_cpuapp.dtsi represents the SRAM accessible
to the network core on the SoC.
However, while the network core can access the app core's SRAM, the
app core cannot access the net core's SRAM. Therefore, the sram1 node
should only appear in DTSI files for the net core, and not the app
core.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Because it is not always possible to determine whether
a request is for Audio class or not, all requests are passed
to it. This can lead to the requests, to e.g. HID interface,
being hijacked by Audio class.
Ignore return value of Audio custom handler as it is not relevant here.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since the settings are stored in the core now,
we can remove REQ_GET_INTERFACE part from custom handler
and simplify the code. Return value is no longer relevant
since custom callback does not need to interfere with the
request handling process.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Store alternate interface settings and
return alternate on GetInterface request.
Fixes: #24200
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This option is deciding whether bootutil_public library supports
multi-image procedures. MCUboot have its own definition which is
unavailable zephyr application. Introduced option declares similar
option for the application.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add boot_write_confirm_multi() and boot_request_upgrade_multi() APIs so
that the user can set the image with given index as pending, confirmed.
This is needed for enabling the mcuboot multi-mage boot feature by
the zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change Highlights:
- Fix error check after `k_work_reschedule_for_queue`. A value of 1
means job was scheduled which was resulting in a ton of "<err>
wifi_eswifi: Rescheduling socket read error" logs getting printed
due to the erroneous check
- When using the B-L475E-IOT01A, attempts to use a TLS socket result
in a hang when socket offload is enabled so I'd like to have a way
to disable the option. To accomplish this, I I switched the
`CONFIG_NET_SOCKETS_OFFLOAD=n` Kconfig option from `select` to
`imply`.
- There was a missing `net_context_set_state()` call when
`CONFIG_NET_SOCKETS_OFFLOAD=n`. I applied the same fix from #30664
for this case to fix the issue.
Signed-off-by: Chris Coleman <chris@memfault.com>
This commit adds the flash driver for nucleo_f207zg platform.
This has been tested with flash test application.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables flash support for nucleo-f207zg in device tree.
The last sector of 128KB is used as storage partition.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This is a follow-up to commit 60d9988401.
Add a third option for the HFXO capacitance that keeps the default
value of the XOSC32MCAPS register untouched. The message in the above
commit incorrectly claimed that external load capacitors for HFXO
(the reset value of the XOSC32MCAPS register) was the configuration
in effect before. In fact, the register value was modified during
the device trimming in the SystemInit() function to use the internal
capacitors, and that is the configuration required for proper RADIO
operation on nRF5340 DK, for instance.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Sphinx provides a way to persist data across builds: the
BuildEnvironment. The build environment is automatically managed by
Sphinx, so there is no need to take care of loading/dumping cache files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use file hashes instead of paths and modification times. This method is
fits better on systems using cache mechanisms. Note that hash is
computed using content obtained in UTF-8 text mode for portability
reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Document that calling settings_load is required when the application is
not creating and managing the identities of the stack itself.
The application will not be able to use all features of the stack before
the identities have been loaded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We do not need the return value of k_sem_take() so ignore it.
Coverity-CID: 236602
Fixes#36313
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We were testing modified_tags.args before we called get_twister_opt.py
so it would never have been created and thus twister_exclude_tag_opt
would never get set correctly. Move the check to after we call
get_twister_opt.py
Also we need to remove modified_tags.args once we are done with it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the host toolchain is used, `-nostdlib` option is not specified
and therefore all default libraries, including the libgcc and its
components, are automatically linked -- so it is not necessary to
manually link them here.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The host toolchain makes use of the host toolchain libraries (i.e.
`-nostdlib` is not specified), so it is not necessary to detect the
toolchain libgcc path and specify one manually.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the build system to always detect the libgcc path
for the host platforms regardless of the target architecture.
The native_posix_64 target previously used the x32 ABI (`-mx32`) and
the multilib for this ABI was not commonly available in the x86-64 host
toolchains.
That is no longer the case because native_posix_64 had been updated to
use the x86-64 ABI (`-m64`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the `NOT no_libgcc` condition for the automatic
libgcc path detection.
The `no_libgcc` variable was previously set in this file to exclude
libgcc detection for the x86-64 targets because the x86-64 arch used
x32 ABI (`-mx32`) and the multilib for this ABI was not commonly
available. This is no longer the case (x86-64 targets now use `-m64`)
and libgcc must always be available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It is necessary to put the device in standby to change the contents of
CTRL_REG1. This register is used to change the sampling frequency.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add C++ area, which covers the C++ language support subsystem and the
relevant tests and samples, with myself as a maintainer.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add "CMSIS-DSP integration" area, which covers the module configs and
tests for the CMSIS-DSP library, with myself as a maintainer.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adding myself as a maintainer for the "C library" area covering both
the minimal libc and newlib, and updating the list of the relevant
files.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Include the lpcxpresso55s69_ns board to the list of platforms
that support running the sample for the TF-M regression tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This will let us get compiler warnings whenever the return value of
specific functions stays unused. I called this __must_check since that's
the name Linux uses as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes: #36185
CMake >=3.20 now supports relative paths in Ninja depfiles.
As Zephyr still supports the use of CMake 3.13, and the current use of
DEPFILE in linker/ld/target.cmake is already absolute path, then the
safest choice is to use old behavior.
This can be changed when Zephyr increases minimum required CMake to be
3.20 or newer.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If all connections were refused, we haven't reached part of
le_ecred_conn_req with connecting channels - thus i was never
incremented. PDU shall be created always with the length containing
full size of scid array - we always respond with all of the CIDs filled,
they just will be all zeros when all connections were refused.
This was affecting L2CAP/ECFC/BV-26-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
If the shell root command shall be set in the application, e.g. for
implementing a login scheme, it is an advantage to set this already
during shell init.
This is now implemented using a new Kconfig variable SHELL_CMD_ROOT.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
The RAM of can instances starts directly after it's predecessor.
This commit fixes can2 and can3 support for stm32g4 series.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Increase timeout to allow testing completion on all impacted boards
Slightly Increase jobs as well
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Property "st,prescaler" of binding "st,stm32-pwm" was set to 2
different default values 0 or 10000 in *.dtsi files.
Since this property rather depends on application than hardware
description, there is no reason to have 2 different default values
in use. Besides, it is a trap for pwm users that should take into
consideration this random default value.
Fix this by defaulting the property systematically to 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In case both, static IP address configuration and DHCP were used, and no
DHCP server was avaliable in the network, clearing the gateway address
rendered the network interface unusable as it's gateway configuration
was cleared.
Prevent this by removing the gateway clearing during the DHCP
inititalization. If the DHCP server is available in the network, the
gateway address will be overwriten after receiving the DHCP OFFER
message or cleared if there's no Router option is avaiable in the
DHCP OFFER message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Configure a timeout for send/recv operations so that the sample can
recover in case the connection stalls (for instance due to IP address
change on an interface).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add radio peripheral to nrf5340_cpunet DTS. The peripheral
description includes antenna matrix congiuration for Direction
Finding extennsion.
Appropriate binding file for nRF radio peripheral already egxists.
There is no default antenna matrix configuration. Antennas number
and GPIOS mapping to DFEGPIOS is project specific.
Complete configuration must be provided by end user as overaly.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The bq274xx fuel gauge does a softreset when configuring, after
which the device is polled and sealed. However the sleep logic
was inverted so the poll became blocking.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The STM32H7 series has a special ADC, which is calibrated
on the factory. The calibration values are stored in flash
and must be retrieved upon powering up the device.
Failure to calibrate the device leads to missing codes in
the ADC readings.
Fixes#35529
Signed-off-by: Lasse Sangild <lsangild@gmail.com>
This means a light requirements-doc.txt is enough for doc writers. See
previous discussions in PR #31199 and PR #31239
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
So when for instance adding some `import wrong_module` line to a sample
runner like bossac.py this adds the text between parentheses ( ) below:
The module for runner "bossac" could not be imported (No module named
'wrong_module'). This most likely means it is not handling its
dependencies properly. Please report this to the zephyr developers.
Test tip: changes to bossac.py do not trigger a fast, incremental doc
build. touch doc/guides/west/build-flash-debug.rst does it instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
When an ACL connection with active CISes terminates, inject CIS/CIG
teardown to ensure CIS is stopped before ACL disconnection completes.
This includes stopping CIG ticker when last CIS has stopped.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Maintaining the cis_handles array in ULL/LLL ISO group data amounts to
double book-keeping. This commit eliminates the array and introduces a
'getter' for obtaining CISes owned by a specific CIG, and iterate
through them.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When an ACL changes state to disconnected, all associated ISO channels
must be disconnected and cleaned up. This commit ensures that.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Use of CONFIG_THREAD_RUNTIME_STATS was added to this sample, but
caused issue because the call to z_thread_mark_switched_in()
is using k_cycle_get_32() before the timer is initialized.
Enable CONFIG_THREAD_RUNTIME_STATS_USE_TIMING_FUNCTIONS=y to
select hidden config CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT,
which calls to initialize the timer needed at boot for thread
runtime stats configuration.
Fixes#33275
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The CMake variable `TFM_ISOLATION_LEVEL_ARG` was not properly set when
application configures higher isolation level. This led to isolation
level always being to set 1.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Fix typo in configuration phase to prepare the driver
for incoming add of Interrupt driven uart mode.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add the ability to map file/dir paths of a PR to twister TAG. We
introduce scripts/ci/tags.yaml to conveys which files are associated
with which tag.
Since not all file/tags will be specified in tags.yaml we use the
combination of the files modified list and the tags.yaml information to
determine which tags can be excluded (ie if the file list doesn't match
any file in tags.yaml for a given tag listed there, we can that exclude
it).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds @Thalley and @asbjornsabo (and the others
from the parent directory) to the babblesim audio
test directory.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the settings in lpcxpresso55s69_ns.yaml to reflect the normal amount
of flash/ram that is allocated to the non-secure side.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT must be set for 802154_rpmsg
sample to properly allocate timers for nRF-802154 driver.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Moved can, spi, usb, usb_fs_phy nodes to f103X8 dts.
Adds CAN for f103X8 series.
Tested on stm32f103c8 soc.
Tested on stm32f103vb soc.
Signed-off-by: Bhavesh Bhojwani <bhaavesh.bhojwaani@gmail.com>
The Google server that the sample connects to sends a larger certificate
since recently. As the overall size of the message conveying the
ceritificate is ~4700 bytes now, current mbedTLS configuration did not
allow to reassemble the message and thus caused failure during the
handshake.
Fix this by increasing MBEDTLS_SSL_MAX_CONTENT_LEN parameter (with some
extra space for any future changes).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align cavs25 with cavs15/18 and add memory segment for uncached mapping
of the SRAM to linker script. Assign sections to uncached and cached
segments as done in cavs15/18.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Policy manager header has to be in the include for applications.
Also it had several function prototypes that are not part of the policy.
These functions were moved from the policy header to a dedicated private
header.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
PM_STATE_INFO_DT_ITEMS_LIST macro documentation was wrong. The example
usage was returning the wrong type and the macro name was also not
correct.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
I made an alignment error in a dts binding, but the build was
successful. After some debugging I found the following warning
explaining the problem:
'/home/casper/src/zephyrproject/zephyr/dts/bindings/gpio/
gpio-keys.yaml' appears in binding directories but isn't valid
YAML: while parsing a block mapping
in "<unicode string>", line 11, column 8
did not find expected key
in "<unicode string>", line 18, column 9
I think this should be an error as there shouldn't be any invalid yaml.
Signed-off-by: Casper Meijn <casper@meijn.net>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Use ticker_yield_abs interface to make scan window on
primary channel to yield when trying to scan auxiliary PDUs.
Fixes#30244.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add ticker_yield_abs interface to reduce ticks_slot_previous
value when radio events yield/stop earlier than their time
reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Implement numerical network operator id, location area code (LAC)
and cell id in modem context and modem shell.
Please note that the functionality to query these values must be
implemented in the modem driver.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
The old default of 1 makes provisioner devices useless, as they can only
provision themselves before they run out of space.
Increase the default value for CONFIG_BT_MESH_CDB_NODE_COUNT to 8.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add radio peripheral to nrf52820 DTS. The peripheral description
includes antenna matrix congiuration for Direction Finding extennsion.
Appropriate binding file for nRF radio peripheral already egxists.
There is no default antenna matrix configuration. Antennas number
and GPIOS mapping to DFEGPIOS is project specific.
Complete configuration must be provided by end user as overaly.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This API meets the requirements for marking an API stable:
- Test cases for the new API with 100% coverage: yes;
we have had coverage for every API macro since the beginning.
- Complete documentation in code. All public interfaces shall be
documented and available in online documentation.: yes, in the
reference documentation:
https://docs.zephyrproject.org/latest/reference/devicetree/api.html
- The API has been in-use and was available in at least 2 development
releases: yes; this API ws introduced in v2.3.
The basic design involving node identifiers and the macros that create
and operate on them has not changed since the API was introduced, and
it is in widespread use throughout the tree. As we head into a new
LTS, it's time to mark it stable.
This is more of an acknowledgement of reality than a big change, as I
don't see any backwards incompatible changes since the API was first
introduced in v2.3. (We have deprecated a lot of label related macros
that are no longer required now that we have DEVICE_DT_GET and
friends, but they're still there, and we're still testing them, just
as if this were a stable API.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modify aics.c to use the bt_aics struct instead of the
bt_aics_server struct. This is done so that there is less
difference between the internal struct usage and the struct
type used in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_vcs to bt_vcs_included, and
rename bt_vcs_get to bt_vcs_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_vcs as
an opaque pointer to a VCS service instance (local
or remote) to match the service instance pointers of
AICS and VOCS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_mics to bt_mics_included, and
rename bt_mics_get to bt_mics_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_mics as
an opaque pointer to a MICS service instance (local
or remote) to match the service instance pointers of
AICS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
commit 5e9c583c24 ("arch/x86_64: Terrible, awful hackery to
bootstrap entry") introduced a terrible trick which begins execution
at the bottom of .locore with a jump, which then gets replaced with
NOP instructions for the benefit of 16 bit real mode startup of the
other CPUs later on.
But I forgot that EFI enters in 64 bit code natively, and so never
hits that path. And moving it to the 64 bit setup code doesn't work,
because at that point when we are NOT loaded from EFI, we already have
the Zephyr page tables in place that disallow writes to .locore.
So do it in the EFI loader, which while sort of a weird place, has the
benefit of being in C instead of assembly.
Really all this code needs to go away. A proper x86 entry
architecture would enter somewhere in the main blob, and .locore
should be a tiny stub we copy in at runtime.
Fixes#36107
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After lwm2m async io was introduced with 32989a38f0,
one instance of function lwm2m_send_message() was left unchanged,
and makes build to fail when boostrap support is enabled.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Mark qemu_x86 and native_posix drivers to support both
TXTIME and PTP clock so that we can use txtime sample application
for testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that TXTIME parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbu parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbu
configuration options defined in IEEE Std 802.1Qbu-2016
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbv parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbv
configuration options defined in IEEE Std 802.1Qbv-2015
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flag Sphinx tabs style properties as !important, it looks like the
default style used by the latest extension version take precedence.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zephyr Bluetooth Mesh did not check whether the proxy message
was actually sent out, so that the response message could
not be received during reset. It did not solve the status
callback of the proxy sending message, so a new problem was
introduced after PR(#28457) merged.
bt_mesh_prov_send(&buf, public_key_sent))
This PR will try to solve the above problem, and will fix
the problem due to thread competition, and PR(#26668) will
not be necessary.
Compared with PR(#30138), it no longer consumes extra RAM
space and supports synchronization of group addresses
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Configures lpuart3 pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm2 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm4 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This shield is working out of the box on Arduino connector,
even if it is not with all standard Arduino SPI CS/CLK pins.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Switch from using internal 6pf to internal 7pf load capacitor for LFXO.
Use a default clock accuracy of 50PPM as this matches lab results.
50PPM should be sufficient for common operating temperatures of
25degC +- 15.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
When frame counter is managed by the radio driver the upper layer
needs to be informed about the frame counter changed. The upper layer
looks for the most recent frame counter in the transmitted frame,
this is why the tx_payload need to be updated after processed by
the radio driver.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fixed issue that caused message to be not correctly reset even after
it is consumed after send sets errno to EAGAIN or EWOULDBLOCK
Signed-off-by: Dominik Dess <dominik.dess@grandcentrix.net>
Removing the CONFIG_TEST=y setting from the TF-M
integration samples prj.conf. TEST does not need
to be enabled in these samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The EFR32MG21 doesn't have a RMU and thus the driver isn't relevant for
that SoC series. Add a Kconfig exclusion so the driver isn't available
on EFR32MG21 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow the use of build configurations from testcase/sample yaml files.
This addition makes it easy to build a sample or a test with the options
provided in the test file by pointing to the test section to be built on
the command line of `west build`.
Fixes#31993
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct MEC15xx HAL value for DnX warn.
For consistency add automatic ack into the driver.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Fixes: #36101
The move of CMake invocation to a dedicated custom target, see #34868
results in tfm_cmake to always be considered out-of-date, causing CMake
to be reinvoked in the TF-M Binary dir, which again results in the
build command to rebuild.
This commit moves the invocation to a custom command with the
CMakeCache.txt as output. The custom target tfm_cmake is updated to
depend on CMakeCache.txt.
This mean that CMake for TF-M will only be invoked inside the Zephyr
build command if that file is missing.
If the CMakeCache.txt file is updated or TF-M CMake or source code is
modified, then the build command inside the TF-M build folder will
ensure correct re-run of CMake from within the TF-M build folder.
This ensures that TF-M will still rebuild if TF-M code is modified,
while at the same time avoid unnecessary rebuilds of TF-M code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enable building the LMP90xxx driver (move devicetree nodes over from the
sensors/spi.dtsi). Limit to building on a single platform as this
is just making sure the drivers compile.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The testcase.yaml had multiple tests defined but they didn't do anything
different. Remove the duplication and rename to drivers.hwinfo.api.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new userspace work queue API is not C++ compatible.
When changing from old API to new API (commit
b706a5e999, 4e3b926) the C++ compatibility
was lost.
Signed-off-by: Fredrik Gihl <fredrik.gihl@flir.se>
Fix wrong channel index send by controller in connectionless
IQ samples report. Former implementation reported value from
lll->data_chan_id which is not valid channel index.
Updated implementation reports value stored in IQ samples receive
node during periodic scanning event preparation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Out-of-tree boards directory is likely to have boards within subset of
architectures (e.g. only 'arm' boards) that are supported by Zephyr.
Currently script iterates over all architectures and tries to list
contents of boards/<arch>/, which might not be existing. This results in
'FileNotFoundError' exception:
Traceback (most recent call last):
File "/project/zephyr/scripts/list_boards.py", line 113, in <module>
dump_boards(find_arch2boards(parse_args()))
File "/project/zephyr/scripts/list_boards.py", line 32, in \
find_arch2boards
arch2board_set = find_arch2board_set(args)
File "/project/zephyr/scripts/list_boards.py", line 45, in \
find_arch2board_set
for arch, boards in find_arch2board_set_in(root, arches).items():
File "/project/zephyr/scripts/list_boards.py", line 78, in \
find_arch2board_set_in
for maybe_board in (boards / arch).iterdir():
File "/usr/lib/python3.9/pathlib.py", line 1149, in iterdir
for name in self._accessor.listdir(self):
FileNotFoundError: [Errno 2] No such file or directory: \
'/project/app/boards/arc'
Simply ignore missing boards/<arch>/ directories and skip to the next
arch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fixes ticker_by_next_slot_get for JIT scheduler by allowing iterating
through ticker nodes without ticks_slot information, and improves
performance for legacy ticker scheduling use.
To reduce the processing and context switching overhead, a new feature
is introduced via BT_TICKER_NEXT_SLOT_GET_MATCH, by which an operation
callback may be added via the ticker_next_slot_get_ext interface, and
the match function is then called when the ticker_job is processing the
request.
By returning true in this callback, iteration stops and normal operation
callback is invoked. If the match function returns false, node iteration
continues. This reduces the number of ticker_job executions for node
iteration.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We do not need the if BUILD_WITH_TFM guard in the main
Kconfig file, as the guards are present insude the respective
Kconfig files that are sourced by the main Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The TF-M project is higly configurable and we end up having
a growing number of Kconfig option definitions in the main
Kconfig file. This commit splits out the configuration options
for the TF-M partition and for the crypto partition configuration
into separate Kconfig files, for ease of reading. The commit
does not introduce behavioral changes.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Always source the Zephyr base soc and shield (board root) Kconfigs
directly from Kconfig instead of generated Kconfig files.
This has the benefit that it is no longer necessary to generate Kconfig
files to source SoC root and shield (board root) when no custom roots
are provided.
Also this cleans up the doc/CMakeLists.txt and ensures that the
doc/CMakeLists.txt is not getting out of sync with the Kconfig.cmake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The stack frame size, used for context switch, is rounded up to 16-bytes
alignment. Therefore, we need round down the pointer of top of the
pre-populated stack frame so that the preserved stack frame size is also
rounded up to 16-bytes alignment.
Fixes#29535
Signed-off-by: Shih-Wei Teng <swteng@andestech.com>
Since physical memory is no longer wholly identity mapped,
it is not needed to set the VM size to be larger than
physical memory size. The VM size was 2GB (max physical
memory size of x86 boards) + 1GB (for memory mappings).
So simply shrink the size to 1GB, as the kernel size is
small and we still have a large chunk of space to do
memory mapping.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With ACPI doing dynamic memory mapping and unmapping
to access ACPI tables, there is no need to identity
map all the physical memory anymore. So remove
the "select" statement in ACPI kconfig.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of accessing ACPI tables through physical address, do
memory mapping/unmapping so they can be accessed via virtual
addresses. This allows us to avoid identity mapping all
physical memory, and thus no need for a page table large enough
to map everything.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This limits the search for Extended BIOS Data Area (EBDA) to
0x80000 to 0x100000 as this is usually the area for it.
If 0000:040e has an address not pointing to this area, it is
probably an invalid address, and should not be de-referenced
to avoid segfault.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the packet status flag value to the iso receive info
struct. This will allow an application to handle potential
lost or erroneous messages.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To support west OpenOCD path image flashing, this generates an npcx hex
image from the npcx BIN image. Moreover, this also changes the name of
npcx output image by CONFIG_KERNEL_BIN_NAME.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Create the pinmux phandle to the ADC driver node in the
devicetree. When the pinmux_pin_set function in
adc_it8xxx2_channel_setup can refer to the setting of
this phandle. It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
* MCUboot was build only for frdm_k64f in zephyr CI.
Extended Zephyr-RTOS integration platform by nrf52840dk_nrf52840
and nrf52840dongle_nrf52840 which allow to build MCUBoot on
these platform in Zephyr-RTOS CI.
* Added AES256 support for image encryption
* zephyr: serial: Remove unnecessary call to irq_unlock
* boot_serial: Port encoding to use cddl-gen
* bootutil_public: Make boot_read_swap_state declaration public
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
These headers were deprecated since release V2.5.0.
Users are expected to use dts based configuration API.
Remove these headers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Device management is more than just mcumgr, so put mcumgr under the
general section to allow for other tools and libraries to be documented
and added.
Moved DFU under the same section.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Distinguish between hardware debugging using probes and built-in debug
features such as tracing, post mortem analysis and thread debugging
using thread analyzer.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the build and configuration systems under one chapter and reorg the
application developer guide to reflect that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit extends the capabilities of the nRF IEEE 802.15.4 radio
driver with IEEE802154_HW_TX_SEC capability.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
We now get toolchain from cmake and can operate even if the toolchain
variant is not set in the envrionment, this test was verifying the old
behavior, so remove. There is not much twister related here to test and
the environment is not setup correctly to run all of this cmake code. We
are testing twister after all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow the user to disable VT100 commands to have a plain shell
without terminal emulation in order to avoid a lot of garbage
ASCII characters in shell output.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Change default partition table to allow for application which need
storage. One use case is running the OpenThread integration which has
a dependency on this.
Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>
Make the APIC_TIMER_IRQ_PRIORITY Kconfig depend on APIC_TIMER ||
APIC_TSC_DEADLINE_TIMER to hide it in menuconfig when not applicable.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Most arch's CMakeLists.txt contain rules to add compiler and linker
flags for coverage if CONFIG_COVERAGE is enabled, but 4 of them were
missing this.
Instead, set the coverage flags in arch/common/CMakeLists.txt which
affects all archs.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Essential type of RHS operand (64 bit) is wider than essential
type of composite expression in LHS operand (32 bit).
LHS entry_val is 32 bit, and RHS (phys+offset) is 64 bit.
Cast RHS composite expression to the (pentry_t) type.
Found as a coding guideline violation (MISRA R10.7) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
NPCX7 variants allocate code RAM either at 0x10070000 or 0x10090000.
The MPU requires addresses and region sizes to be aligned, so the
generic cortex_m/arm_mpu_regions.c results in an ineffective setup with
the addresses above.
This adds a custom mpu_regions setup for the npcx7, which covers both
available sizes, resulting in these two possible setups:
- 192kB devices
Code ram: 0x10090000 to 0x100bffff
MPU region: 0x10080000 to 0x100bffff (256k)
- 320kB devices
Code ram: 0x10070000 to 0x100bffff
MPU region 0: 0x10040000 to 0x1007ffff (256k)
MPU region 1: 0x10080000 to 0x100bffff (256k)
In both cases MPU data RAM setting is from 0x200c0000 to 0x200cffff,
matching the generic Cortex-m setup.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This aligns provisioner and provisionee APIs in terms of endianess
of public key provided by an application.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit allows an unprovisioned device to exchange its public key
using out-of-band techology (see MeshPRFv1.0.1, table 5.19 and section
5.4.2.3).
For in-band public key exchange, the mesh stack uses HCI commands to
generate public and private keys, and DH key. This, however, doesn't
work for OOB public key exchange since there is no command to generate
DH key with a private key provided by an application. Therefore, this
commit adds direct usage of TinyCrypto into the mesh stack for DH key
generation for OOB public key support.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Moving the key check after checking that no pairing or encryption
procedure is started fixes a race condition that is seen in some PTS
tests:
GATT/CL/GAR/BI-04-C
GATT/CL/GAR/BI-16-C
GATT/CL/GAR/BI-21-C
GATT/CL/GAW/BI-05-C
GATT/CL/GAW/BI-12-C
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add GPIO_flag values for GPIO DTS creation that
allows for pins that do not use the default
voltage. IT8xxx2 supports setting voltage
levels for each pin. The default for this SoC
is 3P3 but they can be set individually to
1P8.
This will be used, for example:
i2c_c_scl {
gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
enum-name = "GPIO_I2C_C_SCL";
label = "I2C_C_SCL";
};
Signed-off-by: Denis Brockus <dbrockus@google.com>
This commit provides implementations for the reset cause
API functions as part of hwinfo.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This commit enables DAC sample application to build and run on
stm32f3_disco platform. Updated documentation.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables dac_loopback to build and run on stm32f3_disco
platform.
This has been tested with twister and also as a standalone
dac_loopback test and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables test_dac to build and run on stm32f3_disco
platform.
This has been tested with twister and also as a standalone test_dac
test and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds DAC1 support in dtsi for stm32f3 series. Some
stm32f3 series has DAC2 so adding the same where applicable.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Remove useless definiton STM32F7X_SECTOR_MASK and use CMSIS instead.
By the way fix bug as '|' should be in fact '&',
but thanks to '~' inversion, '|' is now good.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Treat all test_file_* files the same and just explicitly set the header
in the final test_file.txt. This makes the logic the same regardless of
what paths tests are coming from.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the local option (-l) was specified we were ignoring the results
of what_changed.py and always setting a "FULL" build. Only explicitly
set a FULL run if we are building for a commit to the tree (local and
PR builds should respect the output of what_changed.py).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we use 'main' now, rename the example comment usage to use
that branch name instead of 'master'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sample doesn't do anything interesting and we have
tests/drivers/entropy to can show how to call the API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch removes duplicated label RISCVv32/64 and replace into
RISCV that has already used in GitHub.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Copy back the TX buffer content back into the upper layer
in case of a TX failure.
This is necessary in when frame encryption by the radio driver
is used. The shim layer for the nRF5 driver has a buffer, that
is used by the driver to authenticate and encrypt the frame
in-place. In case of a TX failure, the buffer contents
are propagated back to the upper layer. The upper layer
must use the same secured frame for retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The ieee802154_frame_retry will be set by the OpenThread integration
layer in the event of frame retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Use the nrf_802154_retransmit_csma_ca_raw and
nrf_802154_retransmit_at_raw API to retry the frame transmission
after a failed attempt.
The retry must be performed only in response to
a nrf_802154_transmit_failed event.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The ieee802154_frame_retry flag indicates that a transmission
retry is being performed. This flag may be used by the upper layer
to instruct the IEEE802.15.4 driver implementations to not perform
any modifications to the transmitted frame.
This flag should be used only in the event of a previously failed
transmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
During mpu init, we check MSA_frac bits[55:52] and MSA bits[51:48] of
the ID_AA64MMFR0_EL1 register. Currently we only allow 1F to pass the
check. But according to Armv8-R AArch64 manual [1], both 1F and 2F
indicates the processor supports MPU. This commit aims at fixing this.
[1]: https://developer.arm.com/documentation/ddi0600/latest/
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Some centrals deal poorly with receiving a security request immediately
after reconnection whenever reconnecting with characteristics that are
notifiable or indicatable and requiring security. In particular,
Android 9 and earlier devices may lose bond information when this
happens, some Microsoft Surface devices will enter an invalid state
and, on top of that, Apple's Bluetooth Low Energy guidelines explicitly
discourage this behavior.
In order to allow interoperability with those devices, make the GATT
automatic security request sending as a peripheral optional by
introducing a new Kconfig option, BT_GATT_AUTO_SEC_REQ.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The README.rst in `samples/tfm_integration/tfm_ipc` was incorrectly
referring to `psa_level_1`. README.rst has been updated to refer to
`tfm_ipc` example.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
The example in folder `samples/tfm_integration/psa_level_1` contains
code that demonstrate usage of PSA crypto APIs in Zephyr rather than the
PSA levels. Therefore renaming the sample as `psa_crypto`.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
This commit extends the psa_level_1 sample's use of the PSA
Cryptography 1.0 API to demonstrate the following functionality:
- Generate a persistent key (secp256r1)
- Display the public key based on the private key above
- Calculates the SHA256 hash of a payload
- Signs the hash with the persistent key
- Verifies the signature using the public key
- Destroys the key
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
There are a number of platforms that the x_nucleo_eeprma2 eeprom sample
can't build on. Also fix issue with missing include of <mem.h> header
to get DT_SIZE_* macros used by the overlay.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull request https://github.com/zephyrproject-rtos/zephyr/pull/24873
marked all the struct devices const.
However, the linker scripts were never updated to actually allocate
the struct devices in ROM. They're still in RAM, so the main benefit
of this work has not been realized.
Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that we've split out the build_all test there are a few left
over files that aren't needed any more.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The clock control & general driver build tests as they don't get
us any additional coverage then from what we get from the build all
test of tests/kernel/common/kernel.common on all platforms.
Additionally, remove drivers.conf as the file isn't used in any tests.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Function 'nrf_802154_transmitted_timestamp_raw' is not serialized and
connot be used for multi-core devices yet.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The timings were too tight for TLS tests executing on nRF52840 with
hardware entropy source enabled. Increase the timings to make tests
pass.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the hal_nordic module revision, to have Doxygen doc
fixes that solves warnings about non-existing CHANGELOG.md file
and nrfx_atomic Doxygen group.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add Kconfig options that allow configuration of optional internal
load capacitors for the high-frequency (HFXO) and low-frequency
(LFXO) crystal oscillators in nRF5340.
Default settings used for the new options are those that have been
in effect so far, i.e. external load capacitors for HFXO and 6 pF
internal capacitance for LFXO.
This commit also adds missing SOC_ENABLE_LFXO option dependency on
!TRUSTED_EXECUTION_NONSECURE.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add the option to send logs to fs backend using new dictionary
formatting
This can result in much better use of filesystem space
Signed-off-by: Elliot Revell-Nash <elliot.revell-nash@wdtl.com>
When SMP enabled, the primary core calls arch_start_cpu to start
secondary cpus. There is an assertion checking the core mpid to make
sure it is called by primary core.
But the checking is bogus. After the first secondary core is brought
up, arm64_cpu_boot_params.mpid will be changed, which will fail the
assertion.
The current solution restores the arm64_cpu_boot_params.mpid.
However, using the arch_curr_cpu()->id == 0 as the assertion will be
better.
The _current_cpu->id will always fail assertion inside this macro
(__ASSERT_NO_MSG(!z_smp_cpu_mobile()), so I use arch_curr_cpu()->id
instead.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
This allows the current speed of the connection (100Mbps/10Mbps) and
if it is operating in half or full duplex to be queried
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The enc424j600 chipet has 1-byte commands to enable or disable
interrupts which an be used rather than the currently used 4-byte
commands to speed the process up by a factor of 4x
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Code snippet to demonstrate use of 'zephyr,user' binding
for gpio pin was missing a #define to easily get the code
compiling.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In unshared FP mode, only 1 thread can use FPU but kernel doesn't know
which one, so riscv arch would enable FPU of each thread.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In order to increase test coverage, this commit updates the libcxx test
to run with both full and nano variants of the newlib.
Note that C++ exception handling feature is only enabled for the newlib
full variant because the nano variant does not support C++ exception
handling.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use the full version of newlib (i.e. not nano) for libcxx testing since
some features (e.g. C++ exception handling) require the full version of
newlib.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit makes C++ exception handling feature depend on the full
version of newlib (i.e. `CONFIG_NEWLIB_LIBC_NANO=n`).
The `nano.specs`, which selects the nano variant of newlib, libstdc++,
and libsupc++, does not support C++ exception handling because its
lib*c++ is compiled with `-fno-exceptions`.
For more details, refer to the issue #35972.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `.eh_frame_hdr` and `.eh_frame` ROM sections, which contain read-
only C++ exception handling information, are currently specified in
`cplusplus-ram.ld`, and this can cause the linker output location
counter to take a ROM region address while in the RAM region.
This commit relocates these sections to `cplusplus-rom.ld` in order to
prevent the linker output location counter from getting corrupted.
For more details, refer to the issue #35972.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
As there are a lot of PCI IDs for various devices, identifying
the ADSP this way will be hard to maintain.
Implement a more generic device look-up using the PCI vendor and class
information to detect a compatible ADSP.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Porting code from mimxrt1050_evk to this board to enable use of the SD
card. Note that this board does not have the power pin connected to the
SD card and must use the no-1-8-v option for the USDHC driver as in
PR #34205 for the mm_swiftio.
Tested with samples/subsys/fs/fat_fs.
Signed-off-by: Jake Mercer <jake.mercer@civica.co.uk>
The flash write function casts a void * to flash_prg_t, which can be 2,
4 or 8 bytes long depending on the SoC. This can trigger a hard fault
exception if data is not aligned, such as when passing a constant string
from settings_save_one().
Copying the chunk of data to a temporary variable on the stack to avoid
the problem.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Commit 95b916d104 ("drivers: wifi: esp32: fix reconnect issue")
switched from thread created at runtime to statically defined thread.
The difference is mainly visible for simple applications that use
CONFIG_NET_CONFIG_AUTO_INIT=y, where networking setup code is executed
before main() and any statically defined threads. All ESP32 events are
just queued and never handled, so conditions enforced by
CONFIG_NET_CONFIG_NEED_IPV4=y are never met (e.g. Zephyr networking
layer is never informed about being connected).
Switch back to thread created at runtime, which starts at the moment
when k_thread_create() is invoked. This allows ESP32 event processing to
happen just after ESP32 WiFi driver gets initialized and before Zephyr
network auto initialization code (CONFIG_NET_CONFIG_AUTO_INIT=y).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit adds a closing parenthesis for soc model of stm32g050.
Resolves issue #36014
Signed-off-by: Bhavesh Bhojwani <bhaavesh.bhojwaani@gmail.com>
sample.drivers.eeprom.shield.x_nucleo_eeprma2 sample variant
should be run in CI bench only if shield is present on board.
Add a harness_config to specify the fixture check
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The idea of having default platforms is to prioritize running tests over
just building them. We do not have NSIM in CI and thus we are just
building for those platforms without running the tests, so, we spend
lots of time building on PRs which slows everything down. This is
already done in the daily builds.
We now have Qemu covering ARC. If we can get NSIM into CI, then we
should reconsider enabling some NSIM platforms.
Leaving hs_smp and _sem for coverage, we do not have other platforms
covering those.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The usage of -W may lead to the loss of the Sphinx build environment
even for small typos. Remove this option from the defaults but still
enable it on CI, where the fail-fast behavior given by -W is desired.
Fixes#36033
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify the the AT2x EEPROM instance initialization macro a bit by
converting it to use the new DT helper macros for SPI and GPIO.
This also saves a few bytes when only AT24 support is enabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fill the ACK timestamp field in nRF5 driver. This is required by
OpenThread for the proper CSL transmitter functioning.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The AUDIT_LOG partition cannot be used in TF-M builds
with the IPC mode (CONFIG_TFM_IPC=y); we have added a
relevant dependency for this. So we can cleanup the
CONFIG_TFM_PARTITION_AUDIT_LOG=n from the configuration
files of the samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add `hwinfo_get_reset_cause` and `hwinfo_clear_reset_cause` to retrieve
and to clear cause of system reset on supported platforms.
Different platforms can provide different causes of reset, however
there is a great deal of overlap. `enum reset_cause` can be expanded in
the future to support additional reasons, as additional platforms are
supported.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Both NPCX7/9 uses the IRQs at the end of the vector table, for example,
the IRQ 60 and 61 used for Multi-Input Wake-Up Unit (MIWU) devices by
default, and conflicts with ISR used for testing.
This CL changes TEST_NUM_IRQS (The value is changed from 46 to 44) to
move IRQ used for this test suite from 42 to 40 which is reserved in
both NPCX7 and NPCX9 series to resolve the issue.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Introduce the npcx9m6f_evb board driver. NPCX9M6F_EVB board is a
development platform to evaluate the Nuvoton NPCX9 series
microcontrollers. This board needs to be mated with part number
NPCX996F.
It also includes:
1. Add CONFIG_BOARD_NPCX9M6F_EVB definition for adc test suite.
2. Add npcx7m6f_evb.overlay file for gpio test suite.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the support for npcx9m3f and npcx9m6f chips in ecst.py
script which generates the NPCX firmware header.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Fixed mutli-IP DNS resolution as previously the same IP address was
used to populate all AI entries and added DNS_RESOLVER_AI_MAX_ENTRIES
config entry to define max number of IP addresses per DNS name to be
handled.
Signed-off-by: Ievgen Glinchuk <john.iceblink@gmail.com>
Propagate Download and Execute (DnX) entry warning.
Add missing handler for SUS warning power down ack.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This commit address Erratum E10395 and Errata Correction E16350
to ensure that public keys exchanged between Provisioner and
a device aren't identical.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Align name of bt_hci_cp_le_set_cl_cte_tx_params::ant_ids
to other direction finding related commands.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Unmask events related with CTE report for Direction Finding
working in connected mode.
The feature is enabled conditionally, depending on KConfig
configuration provided.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Kconfig option that will enable support for CTE reception
in connected mode. Thanks to that it will be possible to
conditionally enable or disable support of the feature and
decrease code size if the feature is not required.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of events: HCI_LE_Connection_IQ_Report and
HCI_LE_CTE_Request_Failed for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Connection_CTE_Response_Enable
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Receive_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
MCP4725 is an I2C dac that was added with PR #33481. This can now be
added to the bl5340_dvk device tree.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
Also, this eases readability.
The new API can be used any time all FP registers must be manually
saved and restored for an operation.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The existing test puts the same value into all FP registers, runs a
secure service which is then interrupted by a thread that clobbers the
registers.
This patch instead puts different values into each register to test
that each register is restored in the right order.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This kconfig option enables runtime configuration of UART
controllers. This allows application to call uart_configure()
to configure the UART controllers and calling uart_config_get()
to retrieve configuration. If this is disabled, UART controllers
rely on UART driver's initialization function to properly
configure the controller. The main use of this option is mainly
code size reduction.
Fixes#16231
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the bt_conn pointer from the VOCS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify vocs.c to use the bt_vocs struct instead of the
bt_vocs_server struct. This is done so that there is less
difference between the internal struct usage and the struct
type used in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added an API to the HCI header that can be used to retrieve
advertising handle information from a given advertising set.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Since the valid bit-depth of RAM_PDn registers are different, this CL
introduces a 'ram-pd-depth' property in 'nuvoton,npcx-pcc' node if the
application needs to turn off the partial ram blocks for better power
consumption.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Remove unneccesary limit of host to controller packets by the host ISO
buffers and host pending buffers with TX callback.
The host always allocates the buffer before taking the semaphore so this
is already handled by the size of the host buffer pool and the
functionality of the buffer pools to wait for buffers.
In addition the ACL max limit is using the wrong define, as
CONFIG_BT_CONN_TX_MAX is the maximum amount of callback contexts for
transmitting. So the host can have more pending packets than this value.
This is also inconsistent with how the host would handle the V1 reply.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This CL replaces macros for miwu multi-registers' offset with internal
inline functions. This CL also uses soc series definitions to
distinguish the layout of miwu multi-registers between different npcx
series.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
In this CL, instead of a constant value, we use the length of property
'pinctrl-0' of adc0 to indicate the number of ADC channels in different
npcx series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the soc drivers for npcx9 series. There are two soc part
numbers, npcx9m3f and npcx9m6f, are introduced. We also move soc family
configurations from /nuvoton_npcx/npcx7/Kconfig.soc to
nuvoton_npcx/Kconfig.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
In npcx9, the number of pinmux registers (DEVALTx) is more than 16. We
need to extend the "group" member in the struct npcx_ALT to configure
the pinmux settings in npcx9.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL moves power policy source file for all npcx series to common
folder. It also abstracts the sources for checking register structures
to common/registers.c to avoid the duplicated sources in the later npcx
series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This driver is for classic CAN, it makes use of CAN interface
in FIFO mode.
This driver support Standard ID as well as Extended ID.
Tested on H3ULCB, Ebisu platform, with external adapter and
in loopback mode.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Move filter match function to can_utils.h, so that it
can be reused for Renesas driver.
Preserve copyright from Karsten Koenig.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
This commit adds a simple application to demonstrate the zephyr
eeprom interface.
It uses an eeprom to keep track of the number reboots.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds st microelectronics x-nucleo-eeprma2 shield,
which has populated 6 different i2c and spi eeproms.
They are all compatible with the existing at24 and at25 drivers.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit implements the microphone input control service
(MICS) and client, The implementation supports and uses the
Audio Input Control Service (AICS) secondary service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
STM32WL series have an extra APB3 bus with the SUBGHZSPI device on it.
Add the relevant code to enable and disable that clock, and to obtain
the actual clock rate. This is enough to run the STM32 SPI driver
against it.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add ADC support for the STM32WL family, this seems to work following
most of the L0X code path.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This commit makes the flash test generic. The flast test will
look for storage partition in the soc-flash for testing.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Adds a new callback structure to `<gatt.h>` for receiving notifications
of ATT MTU updates. This callback is called regardless of whether the
MTU update was initiated locally or remotely.
Fixes#32035.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use IE variable of ieee802154 MAC frame instead of Thread specific
configuration call for configuring injection of vendor specific
data into enh ack.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
this has a number of advantages:
- allows to only create notifications for each client if there are no
messages already waiting to be send, in practice prioritizing the
memory for messages for answers, thus staying more "responsive".
- saves a fair bit of memory by eliminationg now redundant client_ctx
pointer per observer.
- fixes a potential subtle bug: previously, an observer reset would've
stopped the first observation found with a matching token, which
might've belonged to a differen client.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
This restructures the lwm2m_engine to use a non-blocking socket access
instead of the previously used blocking style, and eliminates any
socket-access from outside of the main work loop.
The main motivation behind this is an issue within nordics
nrf_modem_lib/modem-fw on nrf9160, that leads to socket send() calls to
block indefinitely when the shared memory used for
rpc-communication with the modem is already exhausted because of
incoming data.
This lead to the lwm2m_engine locking up on send calls when there is
also a large amount of incoming data.
This works around this issue, by only issuing send calls when poll
reports the socket to be ready for sending, and (more importantly) by
always receiving all buffered incoming data before sending anything.
There might still be a (perhaps academic) possibility where this
situation might be triggered, when the scheduler interrupts the lwm2m
thread in-between receiving and sending, but for now we have not yet
observed this.
Besides working around the aforementioned issue, this also simplifies
the way resends are handled as they are no longer send from the main
system-workqueue, and limits all interaction with the sockets to a
single thread.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Keys management API for IEEE 802.15.4 drivers was specific for Thread
protocol. With this change API is more generic and aligned with Thread
needs.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
a switch was converted to an if statement and still had a default,
something went really wrong here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With this change, we can put contents into rom_start section
by calling zephyr_linker_sources(ROM_START ...)
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Co-authored-by: Torsten Tejlmand Rasmussen
Change-Id: If1169423b013d3e4df52d91cdb2fbdddc3bace7b
If the transaction of write to read is divided into two transfers,
the second transfer will go to check bus busy and cause i2c reset.
This change adds flag to eliminate this situation.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add multi-instance support and make use of the stmemsc i2c/spi
read/write routine that has been introduced to simplify the ST
sensor drivers code.
Moreover, move spi-full-duplex property from Kconfig inside Device
Tree, so that each LIS2MDL instance can be configured selectively
in accordance to how it is used in h/w.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Zephyr has introduced secure random generator API after the TLS sockets
were implemented. Use this new API in TLS sockets implementation,
instead of implementing secure RNG with mbedTLS in the module itself.
This facilitates integration of the HW RNG accelerators with the TLS
sockets module.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Create minimal configuration for the peripheral_hr. Which can
be used to build this sample for nRF52810 and nRF52811 targets.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
LiteX GPIOIn module provides possibility to change IRQ mode
and edge via CSRs. This commit adds support for that feature.
Signed-off-by: Robert Szczepanski <rszczepanski@internships.antmicro.com>
This adds missing option to disable IRQs.
Devicetree is modified to match previous commit with custom IRQ CSR
addresses.
Signed-off-by: Robert Szczepanski <rszczepanski@internships.antmicro.com>
This adds an option to set IRQ pending and IRQ enabled CSR adresses
in devicetree since these can be custom in LiteX.
Signed-off-by: Raptor Engineering Development Team <support@raptorengineering.com>
This commit adds support for GPIO interrupts in GPIO driver for Litex
SoC Builder.
Signed-off-by: Robert Szczepanski <rszczepanski@internships.antmicro.com>
The final else {} in the if...else if is missing required
comment (non-empty, ';' is not sufficient). This adds a comment
to comply with CG 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Current "switch" operator with one case replace with the "if"
operator, because every switch statement shall have at least
two case-clauses.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed.
Added a default labels to switch-clauses without them.
Added comments to the empty default cases.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Compilers and static code analyzers do not understand Zephyr's
syscall mechanism so they always complain about out of bound
array access inside the generated syscall header functions.
So add a flag for GCC to ignore this type of warning for these
functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
GCC 11 defaults to output DWARF version 5 which pyelftools cannot
currently parse. So keep output at version 4 for the time being.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When running with TFM Regression option set, but without
BL2 (MCUboot) we need to use the TF-M's NS binary, and not
the Zephyr application. This was selected properly for the
case with MCUboot boot already, but not when running the
regression tests without MCUboot.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed. Add a default case with break and comment
to avoid static analysis tool to raise a violation that there is no
default case.
Also, I think, in all cases above no need to use "break",
because they already are using "return".
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
An 'if' (expression) construct shall be followed by a compound
statement.
Add braces to improve readability and maintainability.
Found as a coding guideline violation (MISRA R15.6) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Function types shall be in prototype form with named parameters
Found as a coding guideline violation (MISRA R8.2) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Variable "level" in function z_vrfy_log_filter_set() has type unsigned.
But it is been checked if "level >=LOG_LEVEL_NONE" and
LOG_LEVEL_NONE is 0. It means check if unsigned is ">= 0" in Z_OOPS().
That is logically wrong, because unsigned is ">=0" by default.
Remove that check, to avoid static analysis tool raise
violation
Found as a coding guideline violation (MISRA R14.3) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
If radio driver supports transmission security we need an option
to disable transmission security which by default is done by OT stack
for Thread v1.2
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Simplify the the MCP320x instance initialization macro a bit by
converting it to use the new DT helper macros for SPI.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Simplify the LMP90xxx instance initialization macro a bit by converting
it to use the new DT helper macros for SPI and GPIO.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
commit d31ed3be04 enabled multiple
instances but when multiple instances are actually used the code does
not compile
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Most of the code for the three exception functions is identical so use
macros to make things easier to read.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use the context switch macro for z_arm_cortex_r_svc to be more clear
about the svc call being executed.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
On the STM32F429I-DISC1 PA2 is used for MEMS_INT2, which is driven low
by U3 by default. Connecting it to USART2 TX causes the MCU to try and
drive it high at the same time, causing excessive power consumption.
Dropping the usart2 node since the USART2 alternate pins are also used
for other things, and no other UARTs of the device has a pair of TX/RX
pins available on this reference board in its default configuration.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Arrange device-tree files of npcx7 series by following steps:
1. Move device-tree declarations of npcx family to npcx.dtsi.
2. Leave specific device declarations of npcx7 series to npcx7.dtsi.
3. Move chip series related mapping tables such as
npcx7-miwus-wui-map.dtsi and so on to npcx/npcx7 folder.
4. Move common device-tree declarations used in each npcx series to
npcx-miwus-wui-map.dtsi and so on to npcx folder.
Then, the npcx device-tree folders are arranged to:
dts/arm/nuvoton
|--npcx
| |--npcx7
| | |--npcx7-miwus-wui-map.dtsi
| | |--npcx7-alts-map.dtsi
| | |--.....
| |--npcx-miwus-wui-map.dtsi
| |--npcx-alts-map.dtsi
| |--.....
|
|--npcx.dtsi
|--npcx7.dtsi
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL replaces series-prefix "npcx7-" with family-"npcx-" for npcx dts
nodes such as 'espi-vws-map' and 'miwus-int-map'. Since we plan to
introduce the npcx9 and later series, adding a new node such as
npcx9-espi-vws-map for each series is more complicated and not
necessary.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
/* If any of three above cases satisfied, exit switch
* and mark page reserved
*/
break;
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
