This file uses something that is defined in the toolchain files,
fix a build error by including that header
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Test did not support PPR core due to failing GRTC channel allocation.
This change fixes the channel allocation and enables PPR core test.
Signed-off-by: Bartosz Miller <bartosz.miller@nordicsemi.no>
The README HTML has some extra link underscore between spaces due to the
extra newline and space between the <a> and <img> tags. Remove it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
As confirmable requests will stay allocated for (3 * ACK_TIMEOUT), we
need to adjust the timings so all requests are unallocated by the end
of the test.
Signed-off-by: Francois Gervais <francoisgervais@gmail.com>
This commit makes sure we continue to wait for extra confirmations even
after the request is done so we can handle duplicate confirmations if any.
Detailed description:
rfc7252#section-4.5 specifies that:
"The recipient SHOULD acknowledge each duplicate copy of a
Confirmable message".
So if, for example, the client sends to a multicast destination address,
the server will get multiple requests and will confirm all of them.
Without this commit, the client will set the request to done after
receiving the first answer.
From here the request object will be marked as free and the duplicate
acknowledgements will stay buffered in the network stack.
Once the client tries to send a new request, it will unbuffer those
duplicate acknowledgements but now the request object is unallocated
so the client won't be able to handle those acknowledgements as duplicates.
It will instead treat it as an unexpected ACK.
To work around this issue, rfc7252#section-4.8.2 states that:
"EXCHANGE_LIFETIME is the time from starting to send a Confirmable
message to the time when an acknowledgement is no longer expected,
i.e., message-layer information about the message exchange can be
purged."
Keeping the request object allocated for EXCHANGE_LIFETIME ensures that
duplicate acknowledgements can be handled accordingly.
This commit adds a basic implementation of what is stated in the RFC.
EXCHANGE_LIFETIME has been arbitrarily set to 3 * ACK_TIMEOUT which
seems more reasonable than the 247 seconds stated in the RFC.
Signed-off-by: Francois Gervais <francoisgervais@gmail.com>
Adds NXP platforms to the smp_svr sample allow list,
for overlay-serial.conf and overlay-shell.conf.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The Multi-Channel Inter-Processor Mailbox (MBOX) framework can be seen
as a more general version of the Inter-Processor Mailbox (IPM) framework.
An MBOX driver provides for multiple channels, where IPM provides for
only a single channel of communication.
Currently many applications are written to use IPM, while some are now
being written to use MBOX. This means if a platform wants to support both
types of apps a given it must have a driver for both frameworks. As MBOX
is the newer and more generic framework, new drivers are being added for
this framework only and older IPM drivers are being migrated to MBOX.
This leads to the situation where applications need to be written twice,
once for each framework, to run across all platforms.
The solution is to add a gasket driver that exposes the IPM interface
while using a MBOX driver in the back-end. This shim driver allows
platforms to only need an MBOX driver to support both types of
application. This IPM driver can be used when an application only
supports IPM but the platform only supports MBOX.
This will allow platforms and applications to be ported over to MBOX
independently of each other. Add this driver here.
Signed-off-by: Andrew Davis <afd@ti.com>
This commit makes the device tree configuration decide
which link layer is compiled in. We do this to avoid
hard-to-understand linker errors referencing device tree nodes.
The following configuration creates a difficult to parse
linker error:
* BT_LL_CHOICE contains multiple entries, BT_LL_SW_SPLIT
is selected.
* Each BT_LL_CHOICE has its own unique device tree node with its
own "compatible".
* Only one of the link layer device tree nodes has status "okay",
but not the one corresponding to BT_LL_SW_SPLIT.
The linker error indicates that code using the HCI driver fails
to link with the controller. This because the HCI driver device
tree node references the link layer selected in devicetree which
is not compiled in.
By adding a dependendency to the device tree node, this can no longer
happen. Instead, if BT_LL_SW_SPLIT is now selected in a configuration
file, a Kconfig warning will be issued:
```
warning: The choice symbol BT_LL_SW_SPLIT
(defined at subsys/bluetooth/controller/Kconfig:129) was
selected (set =y), but BT_LL_SOFTDEVICE (defined at
/home/ruge/ncs/nrf/subsys/bluetooth/controller/Kconfig:11)
ended up as the choice selection.
```
This should be easier to understand than:
```
...(hci_core.c.obj):(.data.bt_dev+0x16c):
undefined reference to `__device_dts_ord_132'
```
After this commit we should consider getting rid of link layer
selection from Kconfig completely as the link layer is in practice
selected through device tree.
Unit tests have been updated to satisfy the dts dependency.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Resetting the connect semaphore from tcp_conn_unref() prevents the
ref/unref mechanism from being used freely when needed. Therefore, move
the code responsible for resetting pending connection to
tcp_conn_close() (called only when the connection is being closed on
behalf of the TCP stack, for instance due to RST being received) and to
net_tcp_put() (connection closed on behalf of the application).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is possible that TCP connect() will fail if for example network
interface does not have IP address set. In this case we close
the connection during net_tcp_connect() but do not set the return
code properly. This looks in the application like the connection
succeeded even if it was not.
As the tcp_in() call in net_tcp_connect() might close the connection,
we just take extra ref count while calling tcp_in(). Otherwise we
might access already freed connection.
Before the fix:
net_tcp_connect: context: 0x80757c0, local: 0.0.0.0, remote: 192.0.2.2
net_tcp_connect: conn: 0x8087320 src: 0.0.0.0, dst: 192.0.2.2
tcp_in: [LISTEN Seq=1604170158 Ack=0]
tcp_conn_close_debug: conn: 0x8087320 closed by TCP stack (tcp_in():3626)
tcp_conn_close_debug: LISTEN->CLOSED
tcp_conn_unref: conn: 0x8087320, ref_count=1
net_tcp_connect: conn: 0x8087320, ret=0
After the fix:
net_tcp_connect: context: 0x80757c0, local: 0.0.0.0, remote: 192.0.2.2
net_tcp_connect: conn: 0x8087320 src: 0.0.0.0, dst: 192.0.2.2
tcp_conn_ref: conn: 0x8087320, ref_count: 2
tcp_in: [LISTEN Seq=1604170158 Ack=0]
tcp_conn_close_debug: conn: 0x8087320 closed by TCP stack (tcp_in():3626)
tcp_conn_close_debug: LISTEN->CLOSED
tcp_conn_unref: conn: 0x8087320, ref_count=2
net_tcp: tcp_conn_unref: conn: 0x8087320, ref_count=1
net_tcp: net_tcp_connect: conn: 0x8087320, ret=-128
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add sample application to capture an image frame from a camera
and send it for display on LCD via the LVGL library.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
By default, TFM enables hardware rollback protection, which requires a
security counter to be embedded in the image trailer. The default
behaviour of constructing this counter from the image version breaks the
TFM `boot_nv_security_counter_update` implementation once the version
number is greater than `0.0.1024`. As such, explicitly specify the
desired security counter value. As per the MCUboot docs, this does not
need to be incremented on every firmware update.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add support in this IPC backends for POSIX arch targets in general,
and ensure the nrf5340bsim defines the buffer which will be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a new function for initializing the Rx side,
so users do not need to initialize the pointers by hand
if they did not use PBUF_DEFINE().
Let's also rename pbuf_init() to pbuf_tx_init() to clearly
signify the previous function was only meant to be used
by the Tx side.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a function which can be used to remap embedded device address,
into addresses which can be used in the simulated native boards.
For the nrf_bsim boards we provide an actual implementation.
For other boards, we provide an optional dummy version which does
nothing.
It is up to each board implementation to decide if they want to
provide one or use the dummy.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
85944c64f224406e4d781aa382c5f1f71ed307fd
Including the following:
* 5340: Allocate a buffer for the APP core RAM (2nd version)
* 82ca90c Add NCS test-spec.yml to trigger downstream CI job
* a05d7a6 docs: top README: Mention nrf54l15 support and minor fixes
* cd64524 54 ECB/CCM tests: Remove comment which does not apply
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ssize_t is not part of the C library ISO standard subset, and as such
one cannot expect a C library to expose the type by default.
Some libraries like glibc do not expose this type in general, and
trying to build using them results in build errors.
There is 3 possible options:
1. Continue using ssize_t and:
1.a define _POSIX_C_SOURCE before including any header
1.b include sys/types.h directly (A bit uglier)
3. Not use ssize_t, and instead rely on ISO standard types
Let's just go with 1.a assuming we want to keep using this type,
as that is the correct way of getting this type defined.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
struct i3c_ccc_address is intended to match the output where the address
is left shifted by 1 for SETDASA and SETNEWDA. Require the operations
calling it to shift the data.
add an additional parameter for the setdasa function which will allow for
the da to be configured rather than being hard coded.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Extend the safety overview with information about the IEC 61508 standard
and why it was chosen for zephyr.
Add a new diagram which shows relations between the IEC 61508
and other standards.
Signed-off-by: Simon Hein <Shein@baumer.com>
Use the quirk to keep only the necessary clocks running when the core is
hibernated. The quirk is necessary to bring the USB suspend current
below the USB 2.0 suspend current limit.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Make it possible to have vendor quirks after hibernation entry sequence
and before hibernation exit sequence.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Initialize PHY as part of controller init sequence.
Disable 2M and coded PHYs for now, as they cause issues on devices
that don't support them. This should be made configurable in the future.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Update HAL for Series 2 devices to Simplicity SDK 2024.6.
This HAL deprecates sl_device_init_emu(). Equivalent functions
are now performed by sl_power_manager_init().
For now, soc.c remains compatible with both the Gecko SDK based
HAL for Series 0 and 1, and the Simplicity SDK based HAL for
Series 2. In a future commit, soc.c will be split between the
two platforms.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Fix the chip select when using the synchronous API with DMA path.
Note need to use TxDataRequest flag instead of ModuleBusy flag now
because module busy flag will not deassert until PCS deasserts.
This does not fix CS for the non-DMA path, because that would require a
large driver rework.
Do not skip configuration when calling transceive with the same spi_cfg
because we need to write a new command word.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fixes 78713
Add instructions to the "Git Setup" section to ensure that the user's
GitHub profile name is their full name (first and last) and that the
GitHub profile name and email address match the git config user.name
and user.email.
Page: contribute/guidelines
Tested with:
ninja html
python3 -m http.server 8000
Signed-off-by: Arrel Neumiller <rlneumiller@gmail.com>
The IPv6 branch of net_tcp_endpoint_copy() was accidentally made
conditional on CONFIG_NET_IPV4 rather than CONFIG_NET_IPV6.
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Update the GPIO driver to use PDL API instead of HAL API to fix the
issue with configuring interrupts on both edges
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
- Added `cs-supported` property to nrf-radio devicetree
- Added `HAS_HW_NRF_RADIO_CS` Kconfig option which is set if
`cs-supported` property is enabled
- Enabled `cs-supported` property for nrf54-series devices
- Disabled `cs-supported` on nrf54l15bsim because it is not
yet supported
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
The CSIP spec states that the procedures shall only be done
on bonded devices, so a check for that was added.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add note that those Kconfig options were removed from Nordic UART driver
configuration.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove Kconfig option that no longer has any use after pinctrl
driver is introduced.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This is a leftover from pre-pinctrl era and no longer makes sense.
Driver always manages gpio through pinctrl.
Support removed from uart and uarte shims.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The suspended flag is checked during SOF and RESUME interrupts, and it
is modified within a delayable work item. To prevent race conditions,
this update ensures that interrupts are disabled (locking IRQs) before
modifying the suspended flag. Additionally, the RESUME interrupt is
enabled only when the USB is suspended.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Evaluate CONFIG_LINKER_ITERABLE_SUBALIGN in CMake instead of in the
linker script.
It cannot be assumed that a linker generator implementation is
pre-processed and therefore Kconfig settings cannot be used in those
but must be evaluated in CMake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Constrained application can require to avoid waiting for response
from a server. CoAP No-response option defined in RFC 7967 allows
to do that by suppressing selected response types.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
If DNS statistics is enabled in Kconfig, then start to collect it.
This is useful in order to see how many DNS requests/responses
received or sent, and also see the amount of dropped DNS packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add missing documentation for macro parameters, as `@param ...` is
only expected to be used with a variable argument list.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The `@kconfig{}` pattern does not work properly as the first value in
the `@retval` field, leading to:
```
WARNING: zephyr/include/zephyr/llext/llext.h:296: unexpected token in
comment block while parsing the argument of command retval
```
Signed-off-by: Jordan Yates <jordan@embeint.com>
Pull the output build folder from the environment, instead of hardcoding
the HTML output folder, which is wrong for the latex build.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Current folder name is set to "espressif_esp32" and
might not reflect all kinds of SoCs as such as esp8684.
Rename the folder to "espressif" only.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Separate the pickled EDT generation from the C-Macro header
generation in gen_defines.py to have a more clear responsibility
of the scripts in the DTS parsing process.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Introduces type hints to all functions for improved static type checking
and IDE support.
Also equalizes spacing between functions as the lines are being touched
anyway.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
According to USB 2.0 Specification the remote wakeup device must hold
the resume signaling for at least 1 ms but for no more than 15 ms. The
DWC2 otg controller requires the software to drive the remote wakeup
signalling for appropriate duration (when LPM is disabled, which is
currently always the case in udc_dwc2). Arbitrarily choose to drive the
resume signalling for 2 ms to have sufficient margin in both directions.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The PMU is not reset by core reset and therefore it is necessary to exit
hibernation on DWC2 disable to prevent endless PMU interrupt loop when
the driver is enabled again.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Enter hibernation in thread context with the lock held to make sure to
not queue any transfers when the core is hibernated.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
UDC API handlers and DWC2 driver thread share not only software
constructs, but also the underlying hardware. Ensure that any UDC API
call is not preempted by DWC2 driver thread (and vice versa) by
acquiring the lock in thread handler.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When the queue is full, all messages posted inside interrupt handlers
are simply dropped. This problem can be remedied by having the message
queue large enough, but determining the maximum number of messages that
can ever be posted in the system is really complex task.
Hopefully in DWC2 driver there is finite number of events that have to
be processed inside thread handler. Therefore it is unnecessary to
determine the maximum queue size for the events if the events are posted
to k_event object instead of send to k_msgq object.
Use combination of three k_event structures to handle all possible event
sources. This not only guarantees by design that no event will be lost,
but also slightly reduces the memory usage.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add the necessary entries but keep the usbhs disabled by default on
radio core (it is enabled by default on app core).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit adds support to dictionary logging to parse binary
data directly from input serial and generate the ascii logs.
Signed-off-by: Kumar Siddaramayya <harish.kumar@nordicsemi.no>
For nrf54h20 a range of combinations exist to configure the test and
debug domains data sources and sinks. Expose them in DTS to allow
configuring them. Also drop the previous style which was too rigid to
extend to cover all cases cleanly. The old style was only used in a
single sample application so far.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
This fixes the following warning:
> unit address and first address in 'reg' (0x80280000) don't match for
> /soc/sckcr@81280004
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x82000) don't match for
> /soc/flash-controller@38000000/flash@16000000/partitions/partition@80000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x82000) don't match for
> /soc/flash-controller@38000000/flash@16000000/partitions/partition@80000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add a new test to the simple llext test suite that verifies that DT
devices are properly exported to extensions. This is done by obtaining a
device handle from the DT and then trying to get the same handle at
runtime using the device_get_binding() API.
This test is optional because the current qemu_xtensa platform does not
have any usable DT devices to test with.
The LLEXT heap size is also increased to 64 kbytes to avoid heap
exhaustion when running the new test on mps2_an385.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This change adds a new configuration option, LLEXT_EXPORT_DEVICES, which
enables exporting all devices defined in the device tree to llext
extensions. When enabled, all devices are made available to extensions
via the standard DT_ / DEVICE_* macros.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch adds an indirection level moving the current code from inside
the EXPORT_SYMBOL and LL_EXTENSION_SYMBOL macros to private Z_* macros.
This is done to allow for the official APIs to properly expand more
complex arguments, such as the DT function-like macros.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The comment for Z_DEVICE_DT_DEV_ID() is misleading: device_get_binding()
compares its inputs with values generated by the DEVICE_DT_NAME() macro,
which expands to the node's DT label or to the node's full name.
This patch updates the comment to reflect the actual behavior of
Z_DEVICE_DT_DEV_ID().
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The error message for Z_DEVICE_NAME_CHECK was needlessly calling
DEVICE_NAME_GET() on the "name" string, resulting in a confusing message
being displayed.
Remove the DEVICE_NAME_GET call so that the error message shown by the
compiler contains the actual name.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
These test features are not required and are not used in any USB samples
or tests.
Follow-up on commit 0809b75b42 ("boards: remove test feature usb_cdc")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This change adds bt_le_cs prefix to public CS API as well as
adding le_cs prefix to CS related bt_conn callbacks. This is
to ensure consistency within CS API while maintaining the
separation between the Bluetooth LE and Classic features.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Adds following HCI support for CS configuration:
- LE CS Create Config command
- LE CS Remove Config command
- LE CS Config Complete event
Two callbacks have been added to notify the application
when a new CS configuration is created or an existing
CS configuration is removed.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Added a timeout for active scans (instead of using the host's scan
timeout) in the shell by submitting a k_work that stops the scan
after a specified period.
Fixes#78659
Signed-off-by: Babak Arisian <bbaa@demant.com>
Since the same test might be run in parallel on different platforms,
the one that it's started later will fail due to port re-use for
the OpenSSL server.
Since it's not really required to run the tests on native_sim and
native_sim/native/64, the latter is removed in order to solve this
problem.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is my final week at Nordic. My future job will not involve me
maintaining the Bluetooth host.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Added kruithofa as a collaborator as they are familiar
with ISO and we should have at least 2 collaborators
to perform reviews.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Add jlink as possible runner for cyw920829m2evk_02 platform in
board.cmake file
Signed-off-by: McAtee Maxwell (CSS ICW SW MTO INT 2) <maxwell.mcatee@infineon.com>
Change the interrupt number of flash in device tree due to duplication
And disable CONFIG_FLASH as default
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Channel sounding frequently produces very large events, so the default
of 68 bytes can lead to buffer overruns / memory corruption.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
The code path for error handling and timestamping in tx path
was meant to be identical in function to old eth_mcux driver,
but there is actually a discrepancy causing no error handling
for timestamped frames, fix it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove unnecessary Kconfig.sysbuild for mimxrt1170_evk
as MCUBOOT_MODE_SWAP_WITHOUT_SCRATCH is set by default without it.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
So let's make sure we test in native_sim instead of native_posix..
Also, building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Note: Some drivers tests for which there is native specific driver
which will or may be built differently in native_sim and native_posix
have been left enabled for native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Also let's remove a few redundant test platform filters
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated. Let's switch the filter and build
checks to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is already filtered in the common
part. No need to remove it also per test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these samples in both native_sim and native_posix
does not improve coverage for these samples but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix
does not improve coverage for the sample but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make sure to stop timer counter before interrupt is cleared,
otherwise it might re-trigger it due to default interrupt level mode.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
There is a lot of repeated code for parsing arguments. Add a function
to do the same in every place.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Add i3c_bus_for_each_i3cdev and i3c_bus_for_each_i2cdev to more easily
iterate through each i3c or i2c device on the bus.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Some comments were not updated following the change in how uncached
memory regions are defined in devicetree.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
In the handler of SMP_Pairing rsp, the encryption key
flag is cleared incorrectly.
It causes the LE LTK cannot be derived.
Do not modify the encryption key flag to fix the
issue.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The `LOG_ERR` will spam the log if the window is low e.g. 1 ms.
Also the PWM capture callback will be called with an error, which allows
handling and logging the error if desired.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The size_t type may vary from machines. Current snprintk code was
causing below build issue on arm64.
error: format '%x' expects argument of type 'unsigned int', but argument
4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=].
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This adds a timestamp format mode, that includes the date, which is
usefull, when using realtime for the logging timestamp.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
this way CONFIG_LOG_OUTPUT_FORMAT_CUSTOM_TIMESTAMP
only uses the custom timestamps for
logs that are not send via syslog.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
DBGMCU clock handling was not optimal.
If it exists, enable it before dealing with debug configuration in one
block, then deactivate it after in another block.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Similarly to debug in stop mode, enable debug in sleep mode on H7 series,
as initially described by `STM32_ENABLE_DEBUG_SLEEP_STOP` option.
Not extending it further to other series as I won't be able to test.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
# Conflicts:
# soc/st/stm32/common/soc_config.c
HAL_Enable/DisableDBGStopMode() was one of the last usage of HAL
definitions from Legacy HAL APIs.
Use LL instead to harmonize code across series and remove this dependency.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
DTS files for the application core IMX MPUs should
fall under the NXP MPU area, not MCU.
Also, remove myself from NXP MPU area.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The STM32 DMA driver can provide interrupts for transfers not yet complete.
However, the current implementation will clear the busy flag for all
interrupts when CONFIG_DMAMUX_STM32 is not enabled. The previous fix for
when CONFIG_DMAMUX_STM32 is enabled should also apply when not enabled.
Also if CONFIG_DMAMUX_STM32 is enabled busy flag will not be cleared when
error interrupts occur.
With this change, the busy flag is only cleared when completion interrupts
in non-cyclic mode or error interrupts occur. These are the cases where
transfer will not continue.
Signed-off-by: Carson Green <cgreen@tuta.com>
Add code to get the current frame rate and enumerate all supported frame
rates (frame intervals) of the current format.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
unlike dma v2 binding where bit 15 is reserved, dma v1 binding
needs to configure the the DMA peripheral increment offset.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
The TBS and GTBS instances can now be dynamically registered
and unregistered, which fits better for the use cases of TBS
where specific bearers can come and go depending on the
features of the device.
For example if a SIM card is inserted, then a device can
register a TBS for the provider and remove it again if the
SIM card is removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the includes for Bluetooth Audio samples so they
properly include what they use.
The includes are then used to determine which relevant APIs
to refer to in the READMEs.
Finally improve the naming and description of the samples
using the Profile names and role.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The clocking code present inside the NXP I3C is SoC specific.
This has been moved to the SoC folder which makes this driver
more flexible to clock architecture variations between SoC's
and SDK driver clock API variations.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update RT5xx and RT6xx clock init to add the code
to set the I3C dividers. This code has been moved
from the I3C driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Moves around the shell files so that they are placed nearer
to the features they expose access to.
A few changes as possible has been made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In order to reduce confusion regarding interface count
the respective warning was adjusted to better reflect
the actual state of the system.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Add Data Memory Barrier during the extended calibration of STM32U5, as it
is done in STM32Cube HAL, to avoid sporadic errors during calibration that
may result in measures that are offset from real values.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Make sure we check the checksum offloading capabilities correctly
for VLAN interfaces. Use the real Ethernet interface when doing the
check.
Fixes#78724
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Red zone was causing issues in places where inline assembly was pushing
data to stack, like arch_irq_lock, and possibly in other places.
Initially -mno-red-zone was enabled on x86_64, but was later, maybe
accidentially, disabled in https://github.com/zephyrproject-rtos/zephyr/
commit/b7eb04b3007767be9febe677924918d2422a4406
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Renamed soc from ace30_ptl to ace30.
We were previously using the wrong soc name.
The correct name is ace30.
There is only one ptl platform, but there can be several ace30 platforms.
Signed-off-by: Grzegorz Bernat <grzegorzx.bernat@intel.com>
No functional changes were made in this update.
Only code formatting issues were corrected.
This commit is necessary to preserve Git history
continuity for future changes involving the switch from ace30_ptl to ace30.
Signed-off-by: Grzegorz Bernat <grzegorzx.bernat@intel.com>
This reverts parts of commit c344771d8b
related to intel_adsp soc.
There is a dependency on device initialization that was missed.
Reverting until we have a proper way for migrating to hooks.
Fixes#78880
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit enables the user to choose whether to
allocate the video buffer from the video heap pool
or use a memory region with specific extra capabilities,
such as being cacheable/non-cacheable or using external
memory.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add pwm yml file.
TIMER0/1/2/3 support pwm, LPTIMER0/1 not.
LPTIMER0/1 provide 16bits out that not meet pwm requirement.
Co-authored-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Used the SMP_BT_SVC_UUID_VAL define exposed in the smp_bt header
in the smp_svr sample instead of hardcoding its value.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
Added the SMP service and characteristic UUIDs to the smp_bt module
header and used those definitions.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
C++ file compilation is actually missing the warning-as-error handling,
causing warnings in build files to be unnoticed in CI. Add a flag to
handle them as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add an explicit unsigned literal suffix (U) for addresses obtained from
devicetree, this is to work around a specific warning:
zephyrproject/zephyr/include/zephyr/arch/arm/cortex_a_r/timer.h:40:2:
warning: this decimal constant is unsigned only in ISO C90
When compling
west build -p -b qemu_cortex_a9 -T tests/lib/cpp/cxx/cpp.main.cpp98
Argueably all devicetree addresses and sizes should be unsigned but this
is enough to make CI pass, may look into changing the device.h macro as
a followup.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Drop the array dasignators as they generate a
warning: array designators are a C99 extension
warning when compiling with clang. Not too sure if this is an actual
problem or if the warning should be disabled instead but since it's just
a test it should be fine to just drop them.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
On some architecture (qemu_x86) this tests generate an unused reference
warning for the PM device structure, as nothing in the structure macro
definition is referencing itself.
Reference the struct in the device define, keep the compiler happy.
Also change one of the device priority to dodge a
'__device_dts_ord_8' causes a section type conflict with
'__device_dts_ord_9'
error with llvm.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix the compiler error:
comparison of integer expressions of different signedness: ‘const int’
and ‘unsigned int’
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a dummy byte to struct mspi_timing_cfg, for C++ compatibility, same
as what's done in include/zephyr/arch/structs.h,
include/zephyr/arch/arm/structs.h, include/zephyr/kernel/thread.h and
others.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Common uf2 partition configurations to avoid duplication in boards.
There appears to be a bit of confusion about exactly what a proper
UF2 partition map looks like for the nrf52840, so common dts
configurations should help to avoid confusion.
Configuration for SoftDevice v6 and v7 provided as thats what was
fouond in use in tree already.
Signed-off-by: Jacob Winther <jacob@9.nz>
An issue with some macros is that a space is added to conditional
expansions. Prevent some of these macros to get formatted.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Separating declarations of variables not referenced with #ifdef
when CONFIG_IIS328DQ_THRESHOLD is disabled.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The bt_gatt_attr_read function did not properly handle cases
where value is NULL and/or value_len is 0, or bad mixes of the
two.
The important part is here is that we do not perform the pointer
arithmetic on NULL and/or call memcpy with a NULL src with a
non-0 length.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This updates the hal_xtensa commit to latest, including:
* Adds intel_adsp_ace30_ptl SoC
* Adds sample_controller32 for MPU
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The CONFIG_PINCTRL setting is removed from the board
_defconfig files. And "select PINCTRL" is added to
the appropriate driver files.
Signed-off-by: Bill Waters <bill.waters@infineon.com>
Reverts bus clock settings. Follows MCUXpresso SDK clock settings, and
sets to output of SysPLL2 PFD3 at 198 MHz.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Spi bus controller node names should follow recommended naming
convention from DT spec otherwise DTC will report a warning.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Adds a --download-buffer-size option to the canopen runner to allow
specifying the buffer size of the SDO download.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The buffered and internal options were not assigned in the channel_cfg,
so they would end up at a random state.
The cfg struct is now properly zero-initialized and both options can
be set using optional parameters -b and -i.
Fixes#75884
Signed-off-by: Martin Jäger <martin@libre.solar>
External projects building the documentation may not clone all modules, as
they have manifest filtering. Therefore, not having access to a module
should not produce a fatal documentation build error. Convert the error to
a debug log, so it is at least traced.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The driver enables the clock of a gpio-port if any of the
pins use the port. This is done by calling pm_device_runtime_get
when a pin is used and pm_device_runtime_put when the pin is not
used anymore.
These calls needs to be balanced. But if a single pin was configured
as GPIO_DISCONNECTED multiple times, every time pm_device_runtime_put
was called.
This caused the clock of the port to be stopped and therefore also
other pins on the same port stopped working.
This commit fixes this by keeping track of which pin on a port
has requested the clock and only call pm_device_runtime_get or
pm_device_runtime_put when the clock-request for the specific pin
changes.
Fixes#77698
Signed-off-by: Jeroen Broersen <jbroersen@interact.nl>
This case fails to build on boards having APIC TSC timer enabled.
This change is needed after moving APIC TSC timer support from
apic_timer.c to apic_tsc.c.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
User can set CONFIG_NET_SHELL_SHOW_DISABLED_COMMANDS=n to prevent
unused net-shell commands from showing. This can save flash as
the disabled commands will not be shown in net-shell listing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is useful to know the currect status of DHCPv6 client when
printing the interface information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow "net virtual" command to attach or detach virtual
interfaces. This is useful for device management.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add missing NULL check for public API function, so that the
function will return -EINVAL rather than crashing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Add CONFIG_SHELL_PROMPT_UART to the prj.conf file.
- Ensure the ztest_params test is flashed/run only once per Pytest session.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Make sure it's possible to register IPv4/6 addresses on an offloaded
interface. Add an extra build configuration to make sure it's also
possible when native IP stack is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be needed to enable native networking to be able to
add/delete IP addresses on network interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv4 Kconfig options which only affect native IPv4 stack should be
dependent on NET_NATIVE_IPV4, similarly as it's done for IPv6.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes wrongly returning an SMP version 2 error code as an SMP
version 1 error code instead of adding it as an error
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Allows enabling the bootloader info functionality without MCUboot
being enabled, so that other bootloaders can add hooks with their
own responses
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The I2C transfer API has been recently changed to always automatically
set a STOP on the last message, which was well documented but
implemented only by few drivers.
Unfortunately, while documented, this is a change in the current
behavior and it turns out that some applications depended on it for some
complex operations.
Add a flag to temporarily restore the old behavior, buying time to fix
the application code depending on this.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update documentation to describe the method of returning response data
to the HTTP server using the response_ctx callback parameter.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add test cases for dynamic GET/POST, where the payload is transferred
across more than one call to the dynamic resource callback.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
After introduction of struct http_response_ctx, the dynamic resource
data buffer is no longer needed for transferring data between the
application callback and the server. It is therefore removed to avoid
unnecessary copying of data.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add tests covering new method of providing a response for dynamic
resources.
Tests cover the application sending response codes and headers,
overriding "default" headers, and sending various combinations of
headers and body data. Each case is tested for HTTP1 & HTTP2, both POST
and GET methods.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Allow the application to send headers and response codes from a dynamic
resource callback by filling out a response context structure.
This also allows simple requests to be completed in a single execution
of the callback, by setting the final_chunk flag.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Running IPv6 on STM32H743 using eth_stm32_hal I had to extend
the timeout between the attempts to send Router Solicitation packets
from 1 second to 2 seconds. Else it looked liked the packet never
got sent (checked using tcpdump).
Signed-off-by: Stefan Petersen <spe@ciellt.se>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit adds support for categorizing code samples in the
documentation.
It introduces two new directives:
- `zephyr:code-sample-category::` to create a category and associated
brief description, that implicitly acts as a toctree too.
- `zephyr:code-sample-listing::` to allow dumping a list of samples
corresponding to a category anywhere in the documentation.
Fixes#62453.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
move domain.py to domain/ to make it easier to keep things organized
and e.g. add dedicated css/js resources, etc.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adopt zephyr:code-sample directive to describe the Dining
Philosophers sample and update reference accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add property which indicates that UARTE support frame timeout
feature. Property is added to nrf54h20, nrf9280, nrf54l20 and
nrf54l15.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added helper functions to set and get assisted listening
stream values for codec capabilities and codec configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add bool value that stores the CC change information received in
the interrupt of TCPC alert line. In sink role when in disconnected
state, polling the CC lines causes the chip to be awaken from sleep
mode increasing the power usage. When partner is connected, or any
other CC lines change happens, the chip informs about it with alert.
It can be cached and used instead of asking the chip directly.
Signed-off-by: Michał Barnaś <barnas@google.com>
Add support for VBUS measuring part of the TCPCI compliant device.
This device should be used as a child-node for the more specific
TCPC driver and referenced by the vbus property in the usb-c
connector node.
Signed-off-by: Michał Barnaś <barnas@google.com>
Add generic functions that will be common to all TCPCI compliant
drivers like registers reading, writing and updating.
Signed-off-by: Michał Barnaś <barnas@google.com>
Add header file with registers and fields definitions compliant
to the Type-C Port Controller Interface Specification
Revision 2.0, Version 1.3.
Signed-off-by: Michał Barnaś <barnas@google.com>
The QoS preference defined by ASCS has some specified
limits and values that we should enforce.
Given the current API we cannot return an error to the
unicast server if it supplies invalid values, so we have
to resort to a LOG_ERR.
For the unicast client we treat invalid QoS preferences
similar to other invalid data in the notifications.
This also adds additional documentation in the
bt_audio_codec_qos_pref struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add broadcast support for the CAP acceptor sample.
This adds new sample-specific Kconfig options to help
select the right Kconfig options based on whether
unicast, broadcast or both is being used.
The babblesim implemented for the broadcast has been expanded
to verify that the CAP acceptor receives the broadcast audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes a bug where the shell will reject setting available
context to 0x0. This has now been moved to only affect supported
context instead.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
In the case that a broadcast sync fails for any reason, we need to
set the BIS_Sync value for all subgroups to 0xFFFFFFFF
(BT_BAP_BIS_SYNC_FAILED) as per the BAP spec.
This commit adds a new define for this and modifies
both the scan delegator and broadcast sink to support this.
The change is validated by a modification to the broadcast
assistant test that verifies that the value is set in the
case of an invalid broadcast code (which indicates a
failed BIG sync).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Minimize code duplication chances when multiple boards will be added
eventually as supporting this shield.
Define an alias for board i2c node used by on-shield touch controller.
Move H747I-specific LVGL/display optimization options to a dedicated
defconfig file.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Only ADC_REF_INTERNAL reference option is allowed in
adc_mcux_adc16 driver, but the reference is not used
for driver configuration. Internal, external or VDD
can be used in reality depending on SoC type and
its configuration.
Remove the reference option check to allow any reference
option from Devicetree.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Cadence I3C target FIFO width has been increased to 4 bytes in i3c
hardware REV_ID 1.7. Writing 1 byte to 4 byte FIFOs can cause
unintentional padding for bytes written from TX threshold interrupt
handler. Fixed the target callback to handle tx width of i3c target
writes to FIFO, by using run time rev_id check.
Signed-off-by: Naveen Gangadharan <naveeng1001@meta.com>
Up until now, the `__thread` keyword has been used for declaring
variables as Thread local storage. However, `__thread` is a GNU
specific keyword which thus limits compatibility with other
toolchains (for instance IAR).
This PR intoduces a new macro `Z_THREAD_LOCAL` which expands to the
corresponding C11, C23 or C++11 standard keyword based on the standard
that is specified during compilation, else it uses the old `__thread`
keyword.
Signed-off-by: Daniel Flodin <daniel.flodin@iar.com>
Fixed uninitialized return value variable issue, which would cause
functions to wrongly return non-zero value despite a successful
execution.
Signed-off-by: Chew Zeh Yang <zeon.chew@ambiq.com>
Update the string formatter according to the type of the
variables that it is printing to eliminate compilation
warnings.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Was getting compilation error due to `CONFIG_SHELL_CMD_ROOT`
not being defined whe building the sample under certain
configurations.
The `CONFIG_SHELL_CMD_ROOT` is defined and used only when
`CONFIG_SHELL_START_OBSCURED` is enabled, we can simply move
it to another file and rely on CMakeLists.txt to compile.
Run the `login_init` with `SYS_INIT` so that the `main()`
do not need to have knowledge of its existence.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The minimum Python version was bumped for Zephyr LTSv3, but only in the
documentation and CI. The build system would still accept Python 3.8,
yet some scripts in tree have already broken support with that version.
Incompatibility errors should be prevented early.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Package in the requirements-run-test.txt file, bz,
is not package enabling bz2 support.
It is a security concern and must be removed.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
The TLC5971_STRIP config enables if the "ti,tlc5971" node exists.
Also, removing the setting that explicitly enables in the
`tests/drivers/build_all/led_strip` test.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
These static functions in the `pma.c` are used only when
`CONFIG_NOCACHE_MEMORY` is enabled, so guard them accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add shell commands to enable/disable, move, set velocity, configure
micro-step resolution, and display stepper motor status. Includes an
`info` command to output all relevant data with graceful handling of
unsupported features.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Remove the system heap override config from the board sample config.
Remove the memory saving restrictions.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Provide symbols for the creation of dynamic memory pool.
Update the ROM-code SRAM usage according the IDF main.
Fix static allocations size check.
Increase iram_seg memory size for MCUboot.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Provide symbols for the creation of dynamic memory pool.
Fix the loader ROM buffers start address.
Fix static allocation size check.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add the `CONFIG_ESP_RUNTIME_HEAP` kconfig.
This allows the memory pool to be created starting
at `z_mapped_end` ending at `_heap_sentry`.
Added choice symbol ESP_WIFI_HEAP_* to select which
heap to use in the ESP WiFi adapter module.
Add file heap.c with code to initialize the runtime heap.
Size of the pool is checked during the runtime.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This lets the SoC to select the correct kconfigs to show that
it supports coredump, and with the ability to dump privilege
stack.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Modify the test to spawn a user thread if it is running
with userspace enabled. This allows testing coredump when
the crashing thread is a user thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to call into architecture code to dump
the privileged stack for user threads.
The weak implementation is simply there as a stub until
all architectures have implemented the associated function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a interface to allow coredump to dump privileged
stack which is defined in architecture specific way.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Changed the scan option type from uint32_t to
uint8_t.
There are 2 reasons for this:
1) This reduces the size of the struct bt_le_scan_param.
Since we are now storing two copies of scan parameters
statically in the host, this is not insignficant.
2) This fixes a "hole" in the struct. There are no longer
3 empty octets between the `type` and the `options`, which
caused valgrind warnings when using `memcpy` and `memcmp`
of the struct.
Currently we only need 8 bits for the options available.
If additional options are added later, the field need
to be increased. For the above reasons some additional
refactoring my be required to avoid significant size
increases and the valgrind issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add cargo's bin to the path, and print out the versioning of the tool to
make it easy to ensure the right version has been installed.
Signed-off-by: David Brown <david.brown@linaro.org>
The Buffer data was being stored in cacheable memory for
the MIMXRT1010_EVK, the caching is not handle in these
test and cause mimxrt1010 to fail, this commit moves the
memory region to DTCM and in some cases lowers the size
of the DATA Buffer since it won't fit in DTCM for MIMXRT1010_EVK
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Add VGA and QVGA resolution support to enable
usage of gc2145 sensor by smaller ram capable devices.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Demultiplexer was not ready to handle case when log message was
incomplete which was followed by other log messages. Such scenario
could occur if there was a fault that happen during logging of
a message. In that case incomplete message was followed by valid
messages (fault report) and this fault report was not handled
because processing was blocked waiting for completion of a
message which preceeded fault report.
Since it is expected that some messages may be incomplete a
garbage collection mechanism is added. When start of a message is
received timestamp is logged and list of incomplete messages
is checked for 'old' messages which persist in incomplete state
for long. When message timeouts it is closed and marked as
invalid. It unblocks processing of following messages.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
write_data function which was writing to STMESP data registers was
starting by writing words and tail was written using byte access.
However, RISCV core does not support unaligned access and on Cortex-M33
even if supported it is faster to do aligned access. Reworked
write_data to start first by writing data using byte or half word
access until data pointer is word aligned, then word access is used
and finally tail is written using byte or half word access.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This fixes the following warning:
> unit address and first address in 'reg' (0x88000) don't match for
> /soc/flash-controller@4001e000/flash@0/partitions/partition@87000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x6a) don't match for
> /soc/sercom@42001800/atecc608a@15
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1000) don't match for
> /soc/spi@40003800/spi_nor@0/partitions/partition@10000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Introduce GPIO-based driver for MIPI DBI class that allows MIPI DBI
type A and B displays to be used on general platforms.
Since each data pin GPIO can be selected individually, the bus pins are
set in a loop, which has a significant negative impact on performance.
When using 8-bit mode and all the data GPIO pins are on the same port,
a look-up table is generated to set the whole port at once as a
performance optimization. This creates a ROM overhead of about 1 kiB.
Tested 8-bit 8080 mode with ILI9486 display on nRF52840-DK board.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
The MIPI DBI API supports MIPI DBI controllers type A, B, and C
(except with 16 write clocks). Update the documentation accordingly.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Instead of always using the SPI MIPI DBI mode (type C), look up the
mipi-mode from the device tree and only set the mode to
MIPI_DBI_MODE_SPI_4WIRE as a fallback in case the property is not given.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Currently the RAM allocated for the bootloader is not
enough to use MCUBoot with crypto signatures.
This commit bumps the #defines accordingly to fix
compile errors with ecdsa_p256 and RSA.
Signed-off-by: Brandon Allen <brandon.allen@exacttechnology.com>
The Linux binding DO's and DONT's about designing DT bindings
pretty much all apply to Zephyr as well, and a lot of these issues
come up in reviews in Zephyr, which is the reason that Linux has
this page in the first place, to list common binding review topics.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fixed mcuboot slots, needed after MCUBoot added the default
auto calculation max sectors (CONFIG_BOOT_MAX_IMG_SECTORS_AUTO).
Fixed a possible firmware update error.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
This commit removes the y-selection of the `CONFIG_PINCTRL` Kconfig option
in FE310-based boards defconfig files.
It also makes drivers used in FE310 y-select `CONFIG_PINCTRL` if pinmuxing
is needed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Infom users about Kconfig options deprecation, and provide code snippets
on what they have to do now.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Devicetree should be used instead. Example DT snippets are provided to
ease with the transition.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Only one board tweaked the HFXO configuration (bl5340_dvk)
- LFXO configuration has been added to all boards based on the current
Kconfig defaults: use LFXO with internal 7pF capacitor.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
HFXO is represented as a child of the oscillators node. A new node is
created because it requires its own properties (see the binding for more
details).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
LFXO is represented as a child of the oscillators node. A new node is
created because it requires its own properties (see the binding for more
details).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Create a new compatible: nordic,nrf53x-oscillators, as other series,
e.g. nRF54LX contain a similar but different IP (with PLL control,
etc.)
- Adjust DT: use recommended node name, remove redundant status okay.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
For add_interface(), only add STA interface when hostapd enabled,
and the Soft-AP interface will be added in zephyr_hostapd_init().
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
bt_aics_client_free_instance_get can be called from multiple threads
and as such the atomic_test_and_set_bit should be used instead
of a atomic_test_bit followed by a atomic_set_bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently, debug logging in the console and verbosity
are tightly coupled - verbosity of level 2 and higher
enables logging at the debug level.
This change introduces a separate Twister flag
responsible for controlling the debug logging,
while leaving the rest of verbosity unchanged.
This allows for controlling the verbosity on
both logging levels, according to one's needs.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
For code clarity, remove unnecessary `return` statements
in functions with a void return type they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For code clarity, remove unnecessary `return` statements
in functions with a void return type they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For code clarity, remove unnecessary `return` statements
in functions with a void return type they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For code clarity, this commit adjusts the use of `return` statements
in functions with a void return type as follows:
- Transform `return foo();` into separate statements:
`foo();`
`return;`
- Remove unnecessary `return` statements when
they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For code clarity, unified switch-case usage in `dhcpv6_enter_state` to
use `break` instead of `return`.
Typically, a `break` is used in switch-case statements unless an early
return is necessary, in which case `return` is appropriate.
In this scenario, the `break` statement is the more suitable choice.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Replace the busy boolean flag with an atomic value.
This also modifies the order of how this value is
controlled to avoid any race conditions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Simplifies the k_thread_cpu_pin() implementation to leverage the
existing cpu_mask_mod() infrastructure.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Currently, dfu_suspended() sets the phase SUSPENDED
directly in the structure, bypassing the dfd_phase_set() function.
This prevents the phase change callback in the bt_mesh_dfd_srv_cb
structure from receiving the SUSPENDED event.
Signed-off-by: Emilio Aguila Escalante <emilio.aguila@hotmail.com>
On some EDMA versions, some TCD registers (e.g: SADDR, DADDR,
SLAST, DLAST, etc...) are extended to 64 bits via adding a new
HIGH register holding the value of bits [63:32]. Since, for now,
the driver doesn't support 64-bit addresses, this scenario is
supported by sign-extending the 32-bit value written to SLAST/DLAST.
SADDR and DADDR are taken care of on HAL side.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Some EDMA versions may have the channel MUX register in the MP
region. To support this scenario, use the `EDMA_HAS_MP_MUX_FLAG`
flag to figure out which channel MUX register to use (TCD or MP).
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Update CONFIG_ESP_SIMPLE_BOOT to exclude if CONFIG_MCUBOOT=y
Fix usage of the config according to actual definition.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Ensure that the output certificates directory is created, where
generated certificates will be placed. This fixes a build error seen
when using `make` to build samples/net/wifi for the rd_rw612_bga board,
where the output directory for generated certificates did not exist at
build time.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1. kenistis dspi does support rx and tx with different size,
so skip the tx_bigger test.
2. dspi dma need internal alignment and 8192 bytes are too
many for k64, so reduce to 1440 bytes
fixing: #77010
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
`CONFIG_MP_NUM_CPUS` has been deprecated for more than 2
releases, it's time to remove it.
Updated all usage of `CONFIG_MP_NUM_CPUS` to
`CONFIG_MP_MAX_NUM_CPUS`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The L2 function `ieee802154_decipher_data_frame()` relied on upper layer
LL address fields which breaks encapsulation.
Also fixes a bug introduced in another fix that went overboard (#53734).
Fixes: #78490
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Found a few variable declarations that were not yet moved to the top of
the function/block. Doing this before actually fixing #78490 so that the
fix becomes more readable.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current `K_THREAD_STACK_DEFINE` only create a single stack
shared by all the busy threads. This is causing the application
to crash when there are more than 2 cores in the system.
We should use `K_THREAD_STACK_ARRAY_DEFINE` to create an array
of stacks instead.
Updated the testcase to test up to 8 cores using
qemu_riscv64_smp
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
MICP requires support for the bondable mode for both
the MICP microphone device and MICP microphone controller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the experimental status from the BT_GATT_AUTHORIZATION_CUSTOM
Kconfig option used in the Bluetooth Host GATT layer. This feature
has been present in Zephyr for almost a year without any issue reports
or API modifications.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Currently a user, or a shield definition, must select a Kconfig to
signal that the iovdd_ctrl and bucken GPIOs are connected to the same
pin. We can instead check this in the driver by simply checking if
the iovdd_ctrl_spec and bucken_spec are the same pin.
Update the nrfwifi driver and remove the redundant
NRF_WIFI_COMBINED_BUCKEN_IOVDD_GPIO config.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Adds HCI support for:
- LE CS Read Remote Supported Capabilities
- LE CS Read Remote FAE Table
Callbacks have been added to the conn object to allow upper layers to
make use of the cache commands, with which it will be possible to store
this information and provide it again in the case of a disconnect
and reconnect to the same device.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Add Devicetree overlay for samples basic/blinky_pwm and drivers/led/pwm
for frdm_mcxc242 board to set appropriate tpm clock source and
to enable pwmleds.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
frdm_mcxc242 has tpm ip for pwm generation, but it is not enabled.
Configure and enable it. Add pwmleds definition and disable it,
as leds and pwmleds are mutually exclusive.
Update board documentation.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Timer/PWM Module (TPM) initial clock source is not selected.
Add initial clock source selection based on Devicetree configuration.
Rename clock sources definitions from LPUART specific to general names
usable by several modules on the SoC.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Register all the lpi2c instances.
Add no-power-level property and update driver
to adapt no-power-level property.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
In case of problem with parsing hex data from coverage dump,
do not create empty gcda file.
Such empty file will break gcovr parsing.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
Add board support for the nrf7002eb shield. This shield uses the
nordic edge-connector to be compatible with multiple boards.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The native_sim has already been added to the test cases of
`drivers.ieee802154.build.external` is not being appropriately
processed because there is no corresponding overlay.
Create an overlay as an alias of native_posix.overlay.
Also, add the native_sim/native/64 platforms in the same way.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The mcr20a driver referencing `MCR20Overwrites.h` which is under
`hal/nxp/mcux`.
So, put `depends HAS_MCUX` for clarify the dependency.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
When building with native_sim, We need to specify
```
#define _POSIX_C_SOURCE 200809L
```
to make `gmtime_r` available.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
After rebasing the PR on main, the local copy of the repository may
still contain untracked directories and files (for example, the commits
from the pull request are "git mv"ing files out of directories that are
then left empty). Add a git clean so that we run CI in conditions
that are as close as possible to a fresh clone.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When an incoming PAN ID does not match or when an error occurs while
sending association requests, then locks were not properly released.
Fixes: #78495
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
gpio_basic_api test configuration drivers.gpio.2pin_arduino expects
arduino pins D2 and D3 to be available but they aren't declared in
arduino connectors for this board as not available by default.
Remove arduino_gpio compatibility declaration for now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Since the mkbox board ble f/w upgrade method based on binary
blobs that was proposed in #74255 has been turned down, all
the work done in hal_stm32 module to host blobs is now reverted.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryption, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Removed the experimental status from the BT_BONDABLE_PER_CONNECTION
Kconfig option used in the Bluetooth Host SMP layer. This feature
has been present in Zephyr for over a year without any issue reports
or API modifications.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add the "kernel_shell.h" header which is required but missing,
causing build error.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit re-enables the following platforms for the
`kernel.common.stack_sentinel` test:
* `hifive1`
* `m2gl025_miv`
These platforms working correctly after Renode was upgraded to 1.15.2 in
the CI.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add new script `pack_as_twister.py` to convert memory footprint
data prepared by `./footprint/scripts/track.py` into JSON files
compatible with Twister report schema. Next, the data can be
transformed and uploaded to ElasticSearch data storage the same
way as memory footprint (and other) reports executed by Twister.
Add to `plan.txt` an optional column with the corresponding
test suite names for 'footprints' as an example for test instance
name composing with `--test-name` command argumnent.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The STM32 M4 Clicker is a basic development board for the ST STM32F415RG
Microcontroller. The board contains two LEDs and push buttons and several
headers for interfacing with external devices.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
- Fixed the MX25UM51245G flash DTS write block size from 16 to a value
used by the flash_mcux_flexspi_mx25um51345g driver.
- Fixed flash partitions.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add a section to the docs ellaborating on the relationship between
Zephyr, the native simulator, the nRF HW models and BabbleSim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In case peer goes down or we disconnect from the network during the
TLS handshake, the TLS socket may block indefinitely during
connect()/accept(), waiting for data from the peer. This should be
avoided, hence use the preconfigured timeout for the TLS handshake,
same as we use for TCP-level handshake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
cavs15, cavs18 and cavs20 were removed from Zephyr there is no
need to handle those platforms in the tool.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixes the mailbox notification callback that was not
being called from the ISR when the other side sends
something.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Add the missing #ifndef CONFIG_ZTEST_SHUFFLE in ztest.c file.
This fixes multiple definitions of NUM_ITER_PER_SUITE
and NUM_ITER_PER_TEST.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1a0000000000000000) don't
> match for /soc/peripheral@50000000/i3c@36000/wm8904@1a
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1a0000000000000000) don't
> match for /soc/peripheral@50000000/i3c@36000/wm8904@1a
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Ethernet board variant was missed in commit 138e9591f8 (tests: net:
wifi: exclude RW612 based boards), but is the sole variant that actually
was running this test. Exclude this variant only, since it cannot build
this test due to requiring binary blobs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This small change concerns the following filter functions:
1. `dt_compat_enabled(C)`:
There's a node with compatible `C` and status "okay".
2. `dt_enabled_alias_with_parent_compat(A, C)`:
There's a node with alias `A` and status "okay", and its parent
has compatible `C`.
3. `dt_label_with_parent_compat_enabled(L, C)`:
There's a node with label `L`, and its parent has compatible `C`
and status "okay".
All three functions involve checking whether some node or its parent has
a given compatible, but the way this has been checked is inconsistent.
Function (1) has done it with this Python conditional:
compat in node.compats
while (2) and (3) have used:
parent.matching_compat == compat
The first check works well with nodes that have multiple compatibles,
and it is more aligned with the notion of "has_compat" as seen in the
devicetree macros for C, CMake, and Kconfig.
Arguably, `matching_compat` shouldn't have been used here, because it is
actually a property of a node's binding, moreso than of the node itself.
In practice, it's usually equal to the first compatible for which edtlib
has found a binding, which at first glance is just more constrained than
the `node.compats` check. However, there also exist obscure cases where
the `node.compats` are empty, while the `node.matching_compat` is not.
For now, the three functions can use a combined check, to improve
consistency and utility while avoiding breakage:
node.matching_compat == compat or compat in node.compats
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
It has been deprecated since Zephyr v2.6.0.
The filter that replaced it - `dt_enabled_alias_with_parent_compat` -
had shared code with it, which can now be inlined into `ast_expr()` to
match the parser's overall code structure.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
DVFS medlow oppoint should use trim entry index 2,
this needs to be updated in hal/hal_nordic.
Currently this is not possible because of time
constraints that is why this temporary patch
is applied. This is the only point where
new_f_trim_entry is used.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
This adds a dt overlay to enable support of cc1352p7 lp
to the openthread coprocessor sample application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Some examples may require the usage of a second UART.
This adds UART1 to common launchxl.dtsi in order to make it
available for these examples.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Sometime, the radio causes a bus error.
This happens because we cast a struct and access to a member
that doesn't exists in the original struct.
This updates the driver to use the right struct to make the cast safe.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Currently, if we try to write data from a memory mapped flash address
to the flash then we get a -EINVAL error.
This could break the settings subsystem when we use NVS backend.
In order to make it work, add a buffer and use it when we want to
write data that is located in flash address space.
This has been tested using sample/subsys/settings/
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
- Improved document structure (was *very* flat before) by adding more
meaningful top-level headings and re-ordering some of the existing
sections
- Provide detailed and structured docs for all the custom Sphinx roles
and directives available in Zephyr, including moving the docs for
``.. zephyr-app-commands`` directive and `:dtcompatible:` roles away
from the extensions' source files to align with how Sphinx typically
handles docs for custom roles/directives.
- Added more content regarding diagrams guidelines, images,
cross-referencing of Doxygen documentation, ...
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Increase navigation depth by 1 to enable "local" toc navigation in the
side bar for those pages that are deeper in the documentation tree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Rather than testing each bit until the lowest set bit is found, we can
massage the input parameter to easily clear all bits except the lowest
set bit. When only one bit is set, both find_lsb_set() and find_msb_set()
return the same value.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
This defines raspberrypi,pico-xosc along with a configurable startup
delay multiplier. On some boards, the XOSC takes longer to stabilize.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
Do not allocate TxFIFO in a way that could corrupt Endpoint Information
Controller data (stored at DFIFO Depth address) or access locations
outside the SPRAM.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add timer device name autocompletion to the commands.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
These callback functions are not used outside of the file, make
them `static`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1002c0) don't match for
> /soc/dma@100200
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The script was only looking at the Zephyr base repository and failing to
look for soc roots e.g. in other modules.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
With the requirement in #78316 for Zephyr modules to always define
ZEPHYR_<name>_MODULE Kconfig setting then there is no longer a need
for this commit. Simplify check_compliance by reverting ths commit.
This reverts commit 35e28e6315.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When we have coexistence of hostapd and wpa_supplicant,
wpa_msg has different implementation.
So to let them work together, we need to have common implementation
for wpa_msg and dispatch msgs for hostapd and wpa_supplicant.
So add register zephyr_hostap_ctrl_iface_msg_cb,
and judge if ctx is hostapd by the first integer where ctx points to.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Hostapd has TODO in hostapd_dpp_handle_config_obj,
to save DPP connector using wpa_msg.
AP DPP needs to use dpp_connector, dpp_netaccesskey and dpp_csign
in DPP Peer Discovery handshake in hostapd_dpp_rx_peer_disc_req.
So add AP DPP wpa_msg event handler to store these info.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add hostapd mgmt ops, some use same api as wpa_supplicant,
and DPP use different ops.
supplicant_dpp_dispatch use wpa_cli and hapd_dpp_dispatch use hostapd_cli.
And use common DPP param parse.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add DDR variant of the i.MX95 EVK board (M7 core). Using this
variant, one can run Zephyr from DDR instead of ITCM/DTCM
as it's the case for the M7 "base" board.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This prevents an overlap with `storage_partition`
Additionally, it fixes the following warning:
> unit address and first address in 'reg' (0x20000) don't match for
> /soc/flash-controller@4001e000/flash@0/partitions/partition@19000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x60000) don't match for
> /qspi_flash@40890000/flash@60000000/partitions/storage_partition@70000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
For code clarity, this commit adjusts the use of `return` statements
in functions with a void return type as follows:
- Transform `return foo();` into separate statements:
`foo();`
`return;`
- Remove unnecessary `return` statements when
they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
By keeping track of run-time ATT MTU of all connected peers, it's
possible to increase the notification payload size; thus increasing
data-throughput sent over Bluetooth.
Note that this assumes the Bluetooth connection is properly configured
(with the corresponding connection parameters) to optimize performance.
This is application-specific and shall be examined on each scenario for
optimal performance.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Parts related to the thread runtime stats are somewhat
standalone, refactor it out instead of having two #ifdef
and two places.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Split the `kernel_service.c` into multiple subcommand files,
each file would register with the main `kernel` cmd based on
the dependencies in Kconfig/CMakeLists.txt.
This greatly reduces the number of precompiler directives.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Deadloop happens when CONFIG_NET_ROUTING and VLAN are enabled.
In function net_ipv6_prepare_for_send(), pkt->iface will be
updated with net_pkt_set_iface(pkt, iface) in 2 scenarios:
1. ip_hdr->dst is onlink
2. check_route or nbr_lookup
VLAN is virtual-iface which attaches to a physical-iface. Each
time a packet being sent to a VLAN port will invoke twice of
the net_send_data(). The 1st time, pkt->iface is set to virtual
iface and the 2nd time to physical iface.
However in above 2 scenarios, at the 2nd time of calling the
net_send_data(), the pkt-iface will be changed back to virtual
iface. The system runs into a deadloop. This can be proved by
enabling CONFIG_NET_ROUTING with the VLAN sample.
The main purpose for net_ipv6_prepare_for_send() is to set the
right ll_dst address. If the ll_dst address is already set, then
no need to go through it again. If the packet has done with the
forwarding and set the ll_dst, then no need to check_route again.
And, the pkt->iface will not be changed back to virtual iface.
Fixes: #77402
Signed-off-by: Shrek Wang <shrek.wang@nxp.com>
Increased variable to the mandatory amount of commands, since the
comment of SHELL_SUBCMD_ADD states
"Number of mandatory arguments including command name"
but net suspend takes the interface number to suspend
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
This commit removes the preposition "in" from the phrase
"in particularly"in the I2C and I3C Controller API sections
to improve readability.
Signed-off-by: Arrel Neumiller <rlneumiller@gmail.com>
This fixes the following kind of warnings:
> unit address and first address in 'reg' (0xf) don't match for
> /soc/adc@40012400/channel@15
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x3fc70) don't match for
> /soc/peripheral@40000000/flash-controller@34000/flash@9fc70
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warnings:
> unit address and first address in 'reg' (0x40094000) don't match for
> /soc/peripheral@40000000/usbhs@144000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x3fc70) don't match for
> /soc/peripheral@40000000/flash-controller@34000/flash@9fc70
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warnings:
> unit address and first address in 'reg' (0x40094000) don't match for
> /soc/peripheral@40000000/usbhs@144000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> devicetree error: unit address and first address in 'reg' (0x1) don't
> match for /soc/enet@30be0000/mdio/phy@0
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warnings:
> devicetree error: unit address and first address in 'reg' (0x70000)
> don't match for
> /soc/flash-controller@40020000/flash@0/partitions/partition@700000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x88000) don't match for
> <snip>/flash-controller@43000/flash@0/partitions/partition@80000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x70000) don't match for
> /soc/flash-controller@40020000/flash@0/partitions/partition@700000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1) don't match for
> /soc/enet@30be0000/mdio/phy@0
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x2) don't match for
> /enet@42890000/mdio/phy@0
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add the function, i3c_device_is_controller_capable, to determine if
a target is controller capable.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The Active Controller data struct for static addr is to always be
0x7E. This is so the active controller can be identified according
to section 5.1.9.3.7 of the I3C v1.1.1 Specification.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The dev argument was missing for the doxygen for the function
i3c_bus_deftgts. Add a comment for it.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use `test_adc` in io-channels to be consistent in whole
tests/drivers/build_all/sensor/adc.dtsi file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Do not use SYS_INIT for initializing irq_offload when enabled, instead
using a new interface that is called during the boot process for all
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new call for initializing cache on architectures that need that.
Avoid using SYS_INIT for this and instead call the hook in a fixed place
and run if implemented.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When at verbosity 1, we print out the status of TestInstances.
This makes it harder to notice changes at TestCase level,
which require perusing the logs.
This adds TestCase status and reason printing
if verbosity level is 2 or more.
Reason printing is suppressed if the reason is empty or None.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
The local function ll_gpio_get_pin_pull() is not always referenced. Add
the __maybe_unused attribute to avoid compiler warnings (which may be
promoted to errors by downstream users).
Signed-off-by: Keith Short <keithshort@google.com>
Since b249535 (sensors: Add channel specifier) the signature of
sensor_reconfigure_read_iodev() changed, but sensor_handlers.c
apparently hasn't been updated.
Fix compile time error by updating sensor_reconfigure_read_iodev()
signature in sensor_handlers.c
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
This adds a kconfig to enable making the interrupts
non-preemptible by other interrupts. Enabling this will set
the INTLEVEL to the max non-debug level before clearing
the EXCM bit.
Signed-off-by: Christopher J. Champagne <christopher.j.champagne@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All kscan drivers have been moved over to input, Mark the kscan driver
class as deprecated so it can be removed in the 4.2 release.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Replace several bools in volume controller with an atomic value.
Update how these values are modified so that we can better
prevent race conditions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the volume flag field from the generic "flags"
to "vol_flags" as the generic "flags" will be used for
other values in a future commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix USB w/ SPEED_OPTIMIZATIONS for LPC55xxx SoCs
Root cause was non-volatile register access,
which could get optimized by the compiler
(by -fschedule-insns, specifically)
Signed-off-by: Maxime Vincent <maxime@veemax.be>
test_dependent() was changed to test_entry() but one location was
missed - in a warning message string. Fix it too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
namely:
- dt_nodelabel
- dt_alias
- dt_prop
these currently fail quietly.
This can cause some very confusing errors later on.
By adding `REQUIRED` to the function call one can
easily generate a more clear message:
required nodelabel not found: ...
Signed-off-by: David van Rijn <david@refractor.dev>
We don't own the thread that calls the final `bt_conn_unref()`. The
users might not be aware that they are re-using that poor thread's
stack.
Putting it on the system workqueue gives a predictable stack size and
thread priority for the invocation of the recycled handlers.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
More information in the test description.
Why: At the time of writing, this test exposes a bug in the Bluetooth stack
where all the RX buffers are in use, and the controller driver fails to
synchronously allocate a command response buffer.
This is manifested in an assertion failure in `hci_common.c`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Why is it ok to use the sync pool?
Because command complete/status is processed in prio: that means on the
same stack as the `bt_recv()` call from the driver.
Why does it fix the issue?
Because the complete/status event goes into a pool that is guaranteed to
have one free buffer any time `bt_recv()` is not executing.
Since the driver is the one calling bt_recv(), it (hopefully) will
finish one `bt_recv()` before starting another one.
Fixes#78223
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
For composite operations, we should always check whether the TLV header
is present. Otherwise, all blocks are assigned to one resource.
Signed-off-by: Simon Walz <simon.walz@autosen.com>
The Block1 context for composite operations is not found, as all path
levels are compared. The incoming path level should therefore always be
taken into account.
Signed-off-by: Simon Walz <simon.walz@autosen.com>
Adds an optional hook that allows for appending additional
responses to the bootloader info command
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Imply CONFIG_INIT_AUDIO_PLL on nxp,dmic driver selection on
mimxrt685s/cm33. Make DMIC clock config dependent on the use of the
RT685's audio PLL.
Fixes a regression described in #77851.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
update die_temp node for some stm32 boards,
need that for run sensor die_temp_polling samples.
don't need to modify sample.yaml
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add pinctrl for flexcan2
Add EXP_SEL gpio hog for board mux selection during boot.
Add TJA1057 CAN PHY driver.
Update supported features in board document
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Running sysbuilt tests fails because of missing "run" target.
This adds the default domain context to the command.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Adds coverage for attempting to connect while already connecting
or connecting to a device that already exists.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
There is no reason to use our custom runners for docs build
as it's equally fast on GH default runners and allows doc CI
to be expedited more quickly even when our build farm is
busy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix warnings caught by running west build. Another fix will have to go
in to see why twister was missing these.
#78348
Signed-off-by: Yuval Peress <peress@google.com>
Now that we support internally connected channels we should make the
pinctrl configuration optional.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Adds support for configuring the STM32 DAC channel mode for internal
connections. This is only enabled for SOCs that support it.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Due to the introduction of `shell_fprintf_normal` in PR #77192, we can
minimize caller overhead by eliminating direct `color` parameter passing.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Aligned the `struct shell *` argument name from `shell_ctx` to `sh`
for consistency with other drivers' usage of `sh`, and to match
the `shell_cmd_handler` argument name.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
The `<id>` argument was included in `cmd_i3c_ccc_getvendor`,
`cmd_i3c_ccc_setvendor`, and `cmd_i3c_ccc_setvendor_bc` but
was not processed.
Utilized `shell_strtoul` for proper parsing of the `<id>` argument
in these functions.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Resolved a compilation error where `maxwr`, `maxrd`, and
`max_read_turnaround` were incorrectly referenced.
The code was updated to correctly access these fields from
the `data_speed` structure.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
When using sendmsg() and if CONFIG_NET_IPV4_MAPPING_TO_IPV6 is
enabled, then the addr4 variable was set too late which was causing
null pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Removed deprecated native_posix as test platform.
Added unique sim_ids for tests with the psa as a overlay.
Fixed clang-format issues.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When a message with invalid parameters is received, we must ignore it.
In this commit we check invalid parameters first.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds the following tests:
- Simple test for bridging table
- Test bridging table state changes
- Test persistence storage of subnet bridge
- Test IV Index update with subnet bridge
- Test network key removal for subnet bridge
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If use `IS_ENABLED` macro inside if statements but not as preprocessor
directives, we can always compile the code for settings even if settings
are not used. This allows to reduce amount of firmwares we need to build
in CI to ensure that code compiles.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
We must tcheck if buf has enough tailroom to fit another pair of keys or
pair addresses with direction.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If relay feature doesn't have own adv set, it should use the main adv
set to send messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When a synchronous API is used, the content of `buf` will not be
valid by the time the thread that called the synchronous API is woken up
again.
Therefore, the simplest way to solve this is when a user allocates the
buffer which will be filled up with the content of the buffer passed to
the model callback.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When relaying a Network PDU to another subnet, we need to update sub
field of rx structure so that correct credentials are used. We also need
to update NID field of the Network PDU.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The initial implementation of RPL check for Subnet Bridge wasn't fully
correct. It decides whether to relay or not a PDU based on RPL of only
received messages. However, the spec section 3.9.8 says:
```
In addition, a Subnet Bridge node shall implement replay protection for
all Access and Transport Control messages that are sent to bridged
subnets.
A Subnet Bridge node shall maintain the most recent IVISeq value for
each source address authorized to send messages to bridged subnets.
Messages received by the Subnet Bridge node with the IVISeq value less
than or equal to the last stored value from that source address shall
be discarded immediately upon reception. When a message is retransmitted
to a bridged subnet, the stored IVISeq value shall be updated. In this
way, bridged subnets are protected against replay attacks from other
subnets.
```
This was noticed with MESH/NODE/SBR/NET/BV-02-C test. It passes when
PTS misses the message at step 3 and 4, and fails when PTS manages to
receive the message.
This commit fixes the wrong behavior by removing argument for
`bt_mesh_rpl_check` function making store a new message and bypassing
`local_match` check in case of Subnet Bridge node.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Though nvs backend checks whether the data passed to it is identical to
the stored one, this isn't guaranteed by other the settings api. We can
also avoid going into the settings subsystem since we know what was
actually changed.
This commit adds 2 flags that allow to control whether Subnet Bridge
or Bridging Table states were changed and skips storing if the certain
state was not changed.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
We store only filled up entries, but want to restore the entire table.
`bt_mesh_setting_set` fails if the restored length didn't match the
provided length.
This commit fixes the restoring of the bridging table by allowing to
restore any size as long as the stored size is less than the allocated
one and it is a multiple of the size of a single entry.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Added support for the Bridge Configuration client and server
to the tester application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Adds subnet bridging functionality to the network layer.
Also fixes brg_cfg_srv for minor issues to get it working.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adds implementation for the Bridge Configuration Server model.
Updates `brg_cfg` module to add sanity check for
bt_mesh_brg_cfg_tbl_remove() API. Also, updates the unit test
accordingly.
Adds documentation for the Bridge Configuration Server model
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Implements the Bridge Configuration Client model.
Adds opcodes for all Bridge messages to `foundation.h`. Adds client-side
support for these messages.
Adds a new Kconfig option for the Bridge Configuration Client model to
configure the waiting time for respones for acked messages.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Change the parameters of the bridge table add function to take an
entry struct rather than the fields of an entry.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Changes status type to be status codes defined in Mesh Protocol 4.3.14
as defined for the `BRIDGING_TABLE_STATUS` message.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
The `brg_cfg` module implements the states needed for subnet bridge
feature. It provides two states - enable state, and bridging table
state. APIs are provided to access and modify the states. The module
handles responsibility of persistence of the states.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adding documentation and function calles for the API's
in Bridge Configuration Client model and Bridge
Configuration Server model.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Correct used lines based on write opcode
regardless of the data mode.
The write opcode is set during init for all
modes and can be overwritten in DT.
Add lines correction for PP_1_1_2.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
nocache ram is usually used by DMA to transfer data between
peripherals and ram. Some chips use isolated nocache ram,
which does not necessarily have to be in RAMABLE-REGION.
By specifying the zephyr,nocache-ram options, users can specify
the region where nocache-ram is located. If the user does not
specify it, it defaults to RAMABLE-REGION.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
override the default flash driver with MIMXRT1050_SFDP_QSPI.cfx to support
LinkServer runner for qspi board.
Signed-off-by: Paul He <pawpawhe@gmail.com>
Otherwise we can't escape from DEPRECATED being selected, and so getting
build warnings. It doesn't make sense that the option replacing the
deprecated one is used to automatically enable it.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
PLATFORM_SPECIFIC_INIT is deprecated.
Update nxp hal to sha 77815705c465627b8436cbac51f0bf0594bbeba2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Deprecate support for configuring the MCO source and prescaler from
Kconfig configurations.
This is now done by devicetree and an MCO driver instead, which also
configures the pin to be used by the MCO peripheral.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add stm32f746g_disco board to MCO sample.
This board has 2 MCO instances so useful to show multiple instances
as well as checking the implementation.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add MCO device nodes to the STM32 boards.
The set of supported boards are chosen to replace what is currently
supported in Kconfig.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add device driver for STM32 MCO peripheral which takes configures
the MCO clock source and prescaler, and outputs it on one of the GPIO
pins.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add macro for encoding MCO bit values into the CFGR register
of RCC. Add macros for decoding and extracting the different fields.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add MCO select and prescaler macros to set bits in the RCC CFGRx
register.
The set of supported boards are chosen to replace what is currently
supported in Kconfig.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add clock sources that can be output by the MCO on the stm32f1x and
stm32f10 connectivity line devices.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add clock sources PLL2CLK, PLL3CLK and EXT_HSE.
Needed to check that these clocks are enabled in MCO code.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Extracted common SPI RTIO operations from the spi_mcux_lpspi driver
into spi_rtio, which should be common across RTIO drivers.
Tested with spi_loopback with and without CONFIG_SPI_RTIO. Ran on
mimxrt1010_evk.
Also, verified the other SPI RTIO driver (spi_sam) is not broken by
these changes (tested building for target: robokit1 with the same
conditions as above).
Signed-off-by: Luis Ubieda <luisf@croxel.com>
As a step to make them common code: spi_rtio.c.
Verified this refactorization builds and passes spi_loopback, both with
CONFIG_SPI_RTIO enabled, as well as disabled. Tested on mimxrt1010_evk.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add board support for eval board ganymed_bob, which
is a break-out-board for both soc variants.
Variants of the soc are GBM and GEN1.
Signed-off-by: Sven Ginka <s.ginka@sensry.de>
This change will allow users to configure the Ethernet RX thread
according to their specific real-time requirements.
Adding preemptive threading helps to reduce jitter and
the impact of Ethernet traffic on real-time performance.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Zephyr provides a feature to hook in custom menuconfig implementations
by setting EXTRA_KCONFIG_TARGETS and then defining the corresponding
command to invoke as EXTRA_KCONFIG_TARGET_COMMAND_FOR_<target>.
This feature is broken with sysbuild because sysbuild will try to create
multiple custom targets with identical names.
This commit fix the sysbuild handling of extra kconfig targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
-add nucleo_u083rc and stm32u083c_dk boards for testbench purpose.
- add min_ram property to skip test on boards with little ram size.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
-enable dac in nucleo_u031r8, stm32u083c_dk and nucleo_u083rc
- add dac as new supported interface in docs
- update yaml files
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
remove check for system clock frequency in clock_stm32_ll_h7 because of
addition of fracn (difficult to handle)
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
Replace the busy boolean flag with an atomic value.
This prevents any race conditions with the MPL implementation.
Modifies where the new atomic value is set and cleared
so that initialization gets to finish before allowing
any reads.
Due to how the MPL is structured, and how a select cannot
be rejected from OTS, this does not give a perfect solution.
Ideally we need a separate object per OTS object, rather than
a shared one, and/or the OTS implemenation would allow
us to reject a select if the object is not currently
available or ready.
This commit does not fix the above issues, as that is a
larger undertaking.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Follow-up: #77887
The macros:
- toolchain_ld_base
- toolchain_ld_baremetal
- toolchain_ld_cpp
was deprecated in 5db1f1ae8f but no check
was added to FindDeprecated.cmake, meaning toolchains still providing
those macros was not getting a proper deprecation warning.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Some dict.get() calls did not use a TwisterStatus
as a default value, thus using a NoneType where
TwisterStatus should appear.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Aligns the logging unhandled vs events with the regular ones.
Now it prints out the code and length.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
The STM32WB06 and STM32WB07 SoCs do not support SMPS output current limit.
This makes the LL_PWR_SetSMPSPrechargeLimitCurrent function and all the
LL_PWR_SMPS_PRECH_LIMIT_CUR_xxx defines not visible when one of these SoCs
is selected, resulting in a build failure.
Fix this by only handling SMPS current limit when the feature is available.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Indicate in the STM32WB0 power controller binding that the SMPS output
current limitation is a feature only available on STM32WB05 and STM32WB09.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Various tests and samples use POSIX-only functions. Define _POSIX_C_SOURCE
to ensure they are visible.
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions requre non-null parameters; passing them NULL
values is undefined. Remove tests which are not valid.
Signed-off-by: Keith Packard <keithp@keithp.com>
We need to add _POSIX_C_SOURCE to this file as it uses POSIX values from
limits.h including IOV_MAX, CHILD_MAX and ARG_MAX.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc's sys/_timeval.h (which Zephyr shouldn't be using) needs
sys/types.h to be included first so that __suseconds_t is defined.
Signed-off-by: Keith Packard <keithp@keithp.com>
Select TC_PROVIDES_POSIX_C_LANG_SUPPORT_R to keep Zephyr from
including the common libc implementation of the various _r APIs.
Signed-off-by: Keith Packard <keithp@keithp.com>
POSIX_THREAD_SAFE_FUNCTIONS already selects POSIX_C_LANG_SUPPORT_R and
POSIX_C_LANG_SUPPORT_R alread selects all of the COMMON_LIBC_*_R values.
That makes the 'default y if POSIX_THREAD_SAFE_FUNCTIONS' clauses in these
symbols redundant.
Signed-off-by: Keith Packard <keithp@keithp.com>
options/fs.c and options/timer.c both use POSIX-only functions. To ensure
those symbols are visible from the underlying C library, define
_POSIX_C_SOURCE.
Signed-off-by: Keith Packard <keithp@keithp.com>
struct itimerspec is only required to be available when building with
_POSIX_C_SOURCE defined. Applications including posix/time.h without
defining _POSIX_C_SOURCE will need to have a forward declaration of struct
itimerspec even if they don't use the functions requiring that type.
Signed-off-by: Keith Packard <keithp@keithp.com>
When _POSIX_C_SOURCE is defined by a source file, a POSIX-conforming C
library will define TZNAME_MAX in limits.h. Avoid redefining this
in Zephyr's posix_features.h.
Signed-off-by: Keith Packard <keithp@keithp.com>
picolibc sets _CLOCKID_T_DECLARED and _TIMER_T_DECLARED, not
__clockid_t_defined and __timer_t_defined.
Signed-off-by: Keith Packard <keithp@keithp.com>
There's no reason for the .exported_sym data to always land at one end of a
data region; the order of sections depends on the whim of the compiler and
assembler.
Ignore overlaps between that region and other data regions.
Signed-off-by: Keith Packard <keithp@keithp.com>
GCC complains about struct sockaddr accesses due to the various
address-family-specific variants being of differing sizes. Let's not
mess with code (which looks correct), just silence the compiler.
Signed-off-by: Keith Packard <keithp@keithp.com>
ctime.c and localtime_r_utc.c may use POSIX-only functions; to ensure those
are visible from a POSIX-conforming C library, define _POSIX_C_SOURCE in
these source files.
Signed-off-by: Keith Packard <keithp@keithp.com>
This board is not currently available for the general public, and the
documentation page adds no value whatsoever. Remove it until the board
is finally available and its features and support can be documented
properly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The test_target_position test used a stack allocated `poll_signal` which is
kept as a refrence inside the gpio driver. Since the time for polling the
signal was chosen pretty narrow, the function exited with the driver still
trying to signal the stack allocated value upon movement completion.
Fix by adding the structs to the test fixture and increase the timeout.
Resolves#78466.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x3e800) don't match for
> /soc/flash-controller@400e0000/flash@0/partitions/partition@fe800
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
When testing these functions with CONFIG_NATIVE_LIBC, force the TZ
environment variable to UTC to ensure they produce the expected results.
Signed-off-by: Keith Packard <keithp@keithp.com>
NATIVE_APPlICATION (old native_posix) does not support bulding with the
any other library than the host libC (EXTERNAL_LIBC).
MINIMAL_LIBC_SUPPORTED defaulted to y always, and instead the depends
was set in the MINIMAL_LIBC choice.
This lead to the right library selected, but an incorrectly set
MINIMAL_LIBC_SUPPORTED.
Many tests filter based on MINIMAL_LIBC_SUPPORTED, so they were
not filtered out appropriately.
Let's place the depends in the right place to avoid this problem.
Also remove a redundant depends on for PICOLIBC and NEWLIB_LIBC
which already have the dependency in their respective _SUPPORTED
option.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The http_client sample ignored connect() errors and attempted to run
HTTP query even if the connection failed.
Additionally, in case the query failed, the sample called `exit(1)`
directly, causing busy-looping in the sample. This prevented the logger
output from being printed.
Both of those issues made the sample behavior very confusing when it
encountered connection problems. The sample did not print any output at
all (due to busy looping) or printed several connect failures (due to
ignoring connect() results). This commit fixes those problems.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 47187a9ec9 made the `pinctrl` property
of STM32 ADCs optional, to allow usage of internal channels without wasting
GPIO pins. However, the driver was not adapted to support this new usecase.
(The real bug comes from commit 93956b2073,
that transitioned from a custom `stm32_dt_pinctrl_configure` function to
the standard `pinctrl_apply_state`, without accounting for the fact that
the former returns 0 when pinctrl is empty, but the latter returns -ENOENT)
Modify the driver to work even if no `pinctrl` is present on the ADC node.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Few tests with wrongly names platforms. This section is now being
verified for correctness like all others.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Document the recommended practice regarding having default definitions for
module-specific Kconfig symbols.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
There are HCI drivers which reference the module-specific Kconfig symbols
which are auto-generated when the modules are present. Provide default
definitions for these symbols in case the modules are missing, so that
compliance checking doesn't stumble over seemingly non-existent Kconfig
options.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Refactors the cmake and kconfig bits of the tdk sensor drivers into the
vendor subdirectory to make them consistent with other vendor-sorted
sensor drivers. The tdk driver implementations were previously moved
into the vendor subdirectory in commit
41f1c3a2b7.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
fixed some ReST/Sphinx lint issues missed in earlier cleanups
prior to introducing Sphinx-linter in compliance check
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
On platforms with enforced memory access modes, .text is read-only.
Move hpsram_mask to a cached data section to fix PTL.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use a new file and command for this where all CS commands
can live.
Added support for bt_cs_set_default_settings command.
Added test case where shell is built with CS to ensure code
is built in CI.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Added support for a new API for setting default channel
sounding settings, this is mainly a wrapper around the HCI
command.
For this add a new module for channel sounding, where new
channel sounding APIs will go.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Allow IRQs to work on every hart regardless of the mapping
of the contexts.
Add a test to validate the hart-context mapping.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`-` is preferred over `_` in devicetree property names.
Since, change `clk_src`, `clk_div`, and `clk_out_div` to
`clk-src`, `clk-div`, and `clk-out-div`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This new alias provides a handy shortcut for listing the Kconfig options
that are required for a given symbol to be available.
Fixes#76578
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
If adding/removing to the domain of the current running
thread, we need to update the hardware MPU regions or else
the addition or removal would not be reflected to current
running thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a spinlock to make sure writing to hardware MPU
regions is atomic, and cannot be interrupted until all
regions are written to hardware.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Define a macro to validate aux offset value as it is checked
both in LLL and ULL execution contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Controller hang due to infinite looping caused by
duplicate node_rx enqueued in auxiliary context.
When LLL scheduling is not applied due to invalid aux offset
then ULL scheduling too would skip setting up the reception
after similarly checking the validity of aux offset required
to schedule the reception of auxiliary PDU. This check in
ULL was after the received node_rx being enqueued into the
auxiliary context causing a loop in the list of node_rx.
Dequeue of a list with a loop of node_rx caused an infinite
loop execution in the Controller.
Regression introduced in commit 3590bd648f ("Bluetooth:
Controller: Fix missing invalid aux offset check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check to catch infinite loop due to incorrect
node_rx release.
If same node_rx is released twice then it can lead to
infinite looping when releaseing link or node_rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds missing code-sample directive to all the arch samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
tfm_ipc sample is now using the zephyr:code-sample directive so it should
be referenced with the respective role, not :ref: anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
ReStructuredText can sometimes be tricky to get right, especially for
folks that might be more familiar with Markdown.
This adds a Sphinx/RST linter to the compliance check script to help
catch common issues that can easily go unnoticed and cause rendering
issues.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
trivial typo fix where single backticks should be used instead of double
for the sphinx role kconfig:option
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Commit 204860857e (PR #41061) dropped
support for "any" as the default role, so this should be dropped from
the documentation guidelines as well.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace the booleans used by the VOCS client to use
an atomic value instead.
The flags are modified to be used in a way that prevents
race conditions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rework how flash is initialized in esp32 SoC.
"esp_flash_app_init()" will make sure proper cache handling
will be set in place.i
Fixes#77551
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adds missing code-sample directive to all the tfm_integration samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Board samples were listed in a very flat way before.
This commit introduces the appropriate toctrees to fix this.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the TI samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Enjoydigital board samples in samples/boards/enjoydigital to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Nuvoton board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Raspberry Pi board samples in samples/boards/raspberrypi to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Google board samples in samples/boards/google to
keep samples/boards/ organized by vendor
Added zephyr-code-sample directive to twinkie sample
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Phytec board samples in samples/boards/phytec to
keep samples/boards/ organized by vendor
Added zephyr-code-sample directive to mesh badge
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Intel board samples in samples/boards/intel to
keep samples/boards/ organized by vendor
Added missing code-sample directive to the code relocation sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Quicklogic board samples in samples/boards/quicklogic to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all STM32 board samples in samples/boards/st to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the STM32 samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Microchip board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the 96boards samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all 96boards board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the micro:bit samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Phytec board samples in samples/boards/bbc to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the NXP samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all NXP board samples in samples/boards/nxp to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Nordic board samples in samples/boards/nordic to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the nRF samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Microchip board samples in samples/boards/espressif to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the ESP32 samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update Zephyr fork of MCUboot to revision:
e890df7ab975da181a9f3fb3abc470bf935625ab
Brings following Zephyr relevant fixes:
- e890df7a boot: zephyr: Add ESP32C2/ESP8684 support
- 5d5f0492 bootutil: Fix AES and SHA-256 contexts not zeroized
with mbedTLS
- ca06b9fe boot: zephyr: Add fallback to USB DFU
- 43a49a3b bootutil: Add better mode selection checks
- 956311d2 boot: Make boot_enc_valid take slot instead of image
index
- 242db1a9 boot: zephyr: boards: Add nrf54l15dk configuration
- 651775b5 boot: zephyr: board: Fix nrf54l15pdk Kconfig fragment
- a3762626 boot: zephyr: MCXN947 currently only does not support
swap mode
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Ever since 059aae7c91 (cmake: modules:
dts: make Device Tree error messages more visible, PR #76472), warnings
generated by gen_defines.py got only printed when the exit code signaled
an error.
Without this patch, the warning gets swallowed and the build continues:
```
$ west build --pristine --board nrf54l15pdk/nrf54l15/cpuapp \
samples/userspace/hello_world_user
<snip>
-- Found BOARD.dts:
<snip>/boards/nordic/nrf54l15pdk/nrf54l15pdk_nrf54l15_cpuapp.dts
-- Generated zephyr.dts: <snip>/build/zephyr/zephyr.dts
<snip>
```
With this patch, the behavior is back to how it was before
059aae7c91:
```
$ west build --pristine --board nrf54l15pdk/nrf54l15/cpuapp \
samples/userspace/hello_world_user
<snip>
-- Found BOARD.dts: <snip>/nrf54l15pdk/nrf54l15pdk_nrf54l15_cpuapp.dts
unit address and first address in 'reg' (0x5004c000) don't match for
/soc/peripheral@50000000/vpr@4c000/mailbox@1
-- Generated zephyr.dts: <snip>zephyr/build/zephyr/zephyr.dts
<snip>
```
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The sync timeout is in 10 ms units. The sync_create_timeout_ms variable
already takes into account that we want to have a timeout of at least
7 events.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Update net-setup script and config to support creation of
multiple network interfaces in the host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We do not need promiscuous mode setting in host side when testing
bridging with native-sim, so just ignore errors in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If you interrupt process() operation, we want Twister
to exit as gracefully as it can. This avoids the
UnboundLocalError that could appear e.g.
when interrupting the operation via SIGINT.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Add callbacks for setting and getting the sample rate. The callbacks are
optional if all Clock Source entities support only one sample rate.
This commit results in working High-Speed operation with Windows UAC2
driver when the Clock Source is host-programmable. Windows UAC2 driver
won't work if setting sample rate fails even if Clock Source supports
only one sample rate.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Do not schedule isochronous data on current frame. While doing so can
work at Full-Speed, it is pretty much impossible to do it quickly enough
at High-Speed.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Queue explicit feedback write once the previous one finishes in order to
make it possible to cope with 8x faster High-Speed pace. This matches
the originally intended behavior described in comment.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate Full-Speed and High-Speed descriptors based on full-speed and
high-speed instance properties. Use appropriate descriptor set based on
active speed.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit introduces the option to place the mbed TLS heap in a custom
memory section. The heap might be quite large depending on concurrent
TLS connections, thus it might be needed to place this manually
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
pickup the change in hal_nxp about add support
the missing features and remove the unsupported bits
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Fill the memory of all CPU's IRQ stack with 0xAA on init, so
that `z_stack_space_get` can calculate the remaining space
correctly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
There is an issue on the SHI hardware peripheral to detect CS
rising/failing with bits CSnFE/CSnRE in the EVSTAT2 register in
npcx9m7fb chip. This commit workarounds it by using MIWU to detect the
CS rising and failing.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The internal flash size of npcx9m7fb is 512KB. Reduce the default
Code RAM size from 320KB to 256KB because the Code RAM size is limited
by FLASH_SIZE/2 in the Chromebook EC application.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Generic hook infrastrucutre was added to Zephyr, but NXP MCXC SoCs
were not updated accordingly.
Use generic hook infrastrucutre for MCXC SoCs.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add common default flash partition layout for nrf52840 as many boards
have used identical flash layouts.
The default flash layout was updated to remove scrach in 2022 (9a84258)
but almost all boards were still using the previous layout, so this
updates them to the new layout with allows for larger applications.
This commit also incorporates feeedback from @nordicjm in PR #77791 to
change slot0 to 0x00077000 and slot1 to 0x00075000: "If you use swap
using move, you need a sector for the data to be moved up by, and you
need space for the swap status fields, which is about a sector, so by
making the changes here you get the full 0x65000 for an image, without
these changes you get 0x64000.
Signed-off-by: Jacob Winther <jacob@9.nz>
qemu_xtensa_dc233c didn't pan out like I expected, needed to be
qemu_xtensa/dc233c/mmu to be excluded.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This commit adds a test to showcase how to configure TLS 1.2 and 1.3
socket connections against an OpenSSL server. Only a limited number
of combinations are available for now:
- TLS 1.2
- RSA certificate and key exchange.
- ECDSA certificate and ECDHE key exchange.
- TLS 1.3 only supports ephemeral (ECDHE) key exchange with/without
session tickets.
Since the goal is to test TLS connection and not low level ethernet
functionalities or similar, the only supported platform is "native_sim"
where Linux sockets are used to connect to the OpenSSL server locally.
The idea is that the Zephyr application acts a client and tries to connect
to the OpenSSL server running on the same PC. For sake of simplificity a
bash script is provided to start the OpenSSL server properly.
For completeness a bash script is also provided to re-generate
certificates and keys.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
According to Mbed TLS changelog this feature was set default ON
since 3.1.0 release, so the build symbol is no more available.
This commit removes it from Zephyr.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Verify NRF GPIO driver with NRFX interrupts disabled.
Verify that driver handles properly 'get' and 'set' api methods.
When calling interrupt enable driver should report
'function not implemented' error.
Signed-off-by: Bartosz Miller <bartosz.miller@nordicsemi.no>
This test uses two LLEXT objects: one of them exports a symbol and
the other one calls the exported function.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When identifying the size of an extension image we simply need its
size in bytes, not the number of array elements, that contain it.
Both happen to return the same value, because we use arrays of bytes,
but using sizeof() is clearer.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
By enabling debugging information it becomes way much simpler
to find the root cause of a failing unit test as we can simply
run it with a debugger.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Replace the boolean values for the BAP Broadcast Assistant
with an atomic value. This prevents a rare, but possible,
race condition.
The busy flag has been replaced with 3 atomic values which
provide better granularity in error handling, and allows for
some concurrent write and read requests.
To describe the new behavior, the return values in the documentation
has been updated, and the error handling in the API
functions has improved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Install the second instance to 0x8(uei), because MSI is installed
to 0x3(msi) when SMP is enabled.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Move the lock out from the `plic_irq_enable_set_state()` function
to cover the entire configuration process, so the whole of
enable/disable is atomic.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fixing a bug where during the bus_init routine, when a slave is
initialized, the target hardware can get an interrupt, and this can occur
before the target_config structure is assigned; the generic IRQ handler
attempts to use this structure to grab callback function pointers, but
with no target config it attempts to access the structure member from a
null pointer. Fix works by adding ternary operation during IRQ that first
checks if target_config is null or not.
Signed-off-by: Matthew Mulloy Steinborn <mulloystmatthew@meta.com>
Add a bool fn so there is some room for a comment explaining why this is
not guarded by an IS_ENABLED().
Also add an optimization when building with an onboard controller.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The code was a bit hard to read. From what I understood, the intent is
to not send the PHY update if we are already on 2M symmetric.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Align settings and DFU partition definition with the values, specified
by the design documentation.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
Drop some exclusions for python 3.6, this version is not tested in the
first place anyway so these are redundant.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
"type | None" syntax is only available with Python from version 3.10,
fix building with earlier 3.x Python versions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This commit adds a KConfig option and an API to set the interval in
which chunks get send, in milliseconds.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
using arduino header to simplify test settings.
arduino_header D2 and D3 can be used by default.
alt: 118 platforms are enabled for this test.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add simics as a simulation platform allowing running platforms
supported in simics to be run using west or twister.
Originally authored by: Maureen Helm
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds new CMake extension functions that allow setting board-specific
emulator arguments, similar to existing support for setting
board-specific runner arguments.
Originally authored by: Maureen Helm
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Before this change, headings in documentation pages were using the same
font family as the rest of the content, which made them blend in too
much.
This introduces a humanist font stack for the headings as well as some
minor tweaks to make the hierarchy of the document clearer through
better differentiation of the different levels (i.e. not just relying on
font size).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
added a missing dvh causing footer to be footer to be displayed outside
of the viewport on mobile when browsing "Desktop site" version, and also
added fallback "vh" rules for slightly better browser compatibility.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Include `qemu_cortex_a53` (ARMv8-A ISA) target in intergation platforms
for LLEXT subsys tests.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Adds support for all relocation type produced by GCC
on AARCH64 platform using partial linking (-r flag) or
shared link (-fpic and -shared flag).
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Removed arch-specific symbols that are not used. They should be placed
in arch-specific implementation for LLEXT subsystem that is currently
missing.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Replace use of 32-bit architecture macro to macro arch agnostic that
is resolved in compilation.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Replace boolean flags with atomic.
This also properly add guards for the multi-device procedures
and reduce the number of places where the busy flag is set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace the busy boolean flag with an atomic value.
This prevents any race conditions with the MICP client implementation.
This also adds a missing check for the discovery procedure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
TMP variant without combine channel feature is used in some NXP SoCs.
Build error occurs for such socs because of accessing unavailable
struct member in hal.
Fix it by adding #if directive to check the feature presence.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Replace the busy boolean flag with an atomic value.
This prevents any race conditions with the implementation.
The discovery procedure is also now properly guarded with it
so that in case that any procedure is currently in progress
for the specific connection, then a new discovery procedure
cannot happen until all other procedures are finished.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Zephyr UDC (USB Device Class) and clk_hsi48 (hi-speed
internal 48 MHz) devicetree nodes so that the nucleo_l496zg
board works with other USB DC samples and tests.
Update the board yaml description to indicate usb and usb
device roles are supported.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
this adds the option to have the clock periodically resynced with
the time from the sntp server, instead of just syncing at startup.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
To avoid possible linker warnings, when the linker may end up placing
this section in a segment with text and therefore with execute
permissions, with let's move it next to the .data section.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To avoid possible linker warnings, when the linker may end up placing
this section in a segment with text and therefore with execute
permissions, with let's move it next to the .data section.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's make it possible to use the newly introduced definitions
for separated sub-sections for .data and .text symbols in the
NATIVE_SIMULATOR_IF (symbols visible to the runner and other
images).
Note all symbols anothed like before with just
NATIVE_SIMULATOR_IF will keep next to .text just like before.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align with native_simulator's upstream main
b4b9791ac822ae300363dc3ebbc7b7ac200632ce
Which includes:
* b4b9791 NATIVE_SIMULATOR_IF macros: Provide version with explicit
section names
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
If a test was written outside 'app_root' the 'app' path may contain
previous directory ('..') which would lead to the compilation file being
written outside the 'WORK_DIR'.
Fix the issue by checking if the 'app' is inside 'app_root', if it's
not, use the absolute path to the app for creating the 'this_dir'
variable.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The bsim boards, just like the real ones, use the common
nordic DT definitions, but this were not triggering CI.
Some issues got in main due to this. Let's be sure to trigger
this workflow also when the releavnt DT files are changed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Before unmapping a memory page, the cache is flushed. If the given memory
page is not mapped, this operation ends with a cpu exception on the
ptl platform. Add check if tlb translation is active before flushing.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Create a file to be used in CI or locally that lists all enabled/disabled
checks.
Can be passed as a CMake argument or set as environment variable:
CODECHECKER_CONFIG_FILE=$ZEPHYR_BASE/tests/codechecker_config.yaml
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If we're running in a twister context, use the information as sane
defaults for CodeChecker.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Update the pyocd runner configuration of the nucleo_g0b1re
to use the correct target.
Pyocd had issues only just after the release of the G0B1/C1 line.
This issue has already been fixed a few releases ago.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add kernel reboot support, so can use shell to verify reboot function.
uart:~$ kernel reboot cold
Known issue is imx93 currently can only support cold reboot and doen't
support warm reboot.
Updated board document.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
If PSCI is enabled, it will leverage psci reset API to achieve system
reboot, otherwise a weak dump reboot API is provided, and platform
can override these APIs if platform specified implementation provided.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This changes how some arguments are set in the `Handler`s.
`options`, `generator_cmd` and `suite_name_check` are now passed as
arguments to the constructor rather than injected from an other module.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Python 3.12 warns that
> Testing an element's truth value will raise an exception in future
> versions. Use specific 'len(elem)' or 'elem is not None' test instead.
> if elem_ts := root.find('testsuite'):
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
CONF_FILE, DTC_OVERLAY_FILE and OVERLAY_CONFIG are deprecated but still
used by the tests causing warnings when running them.
This adds a test_data specific to validate the emission of the warning,
and removes the offending args from the other test_data files.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Space separated lists are deprecated but this notice is not checked for.
extract_fields_from_arg_list also converts lists back to space-separated
lists causing a warning on get_scenario
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Adds Device Tree include files for all MCUs in the STM32WB0 series.
These DTSI files only contain the supported peripherals for now.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The existing hwinfo driver for STM32 is incompatible with STM32WB0 series.
Prevent compiling the driver if the target's series is STM32WB0.
This fixes the build failure on the drivers.hwinfo.api test.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Adds a basic driver for the STM32WB0 flash controller (read/erase/write).
Extended operations are not supported by this driver.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Adds a driver for the STM32WB0 series GPIO interrupt controller.
This driver implements the STM32 GPIO INTC API, along with an extension
function used to check if a specific line is available on current board.
This also extends the GPIO INTC API to support level-sensitive interrupts,
as this feature is available on STM32WB0.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The RADIO and RADIO_TIMER HAL modules will be required to
implement BLE support for STM32WB0 series.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Update the West manifest to point to an updated version of the STM32 HAL
compatible with WB0 series thank to inclusion of STM32CubeWB0 package.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
overhaul sample criteria and what we expect in a sample, especially
overhaul the twister part and what should be provided for good test
coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch addresses an issue in the ACE platform power management code
where the HST domain suspend operation was performed after the IMR
context save. This resulted in the power management context being
restored with outdated values upon wake-up from D3 state, leading to a
failure to resume the HST domain correctly.
By moving the `pm_device_runtime_put(INTEL_ADSP_HST_DOMAIN_DEV)` call
before the IMR context save, we ensure that the HST domain is suspended
with the current context, and upon resume, the power management context
has the correct information to restore the HST domain state.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Add testcases for ICBMSG on nRF54L15 with only one endpoint,
including non-multithreading case.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
introduction of O_TRUNC flag has conflict with libc flags,
so realtered posix open flags based on the commit
499a633976 ("posix: device_io: use mode argument correctly in open()")
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Rework comment text for FAKE_ENTROPY_NATIVE_POSIX used as
entropy driver for the Controller on BOARD_NRF54L15BSIM.
Relates to commit 34b6b3d9eb ("Bluetooth: Controller:
Support FAKE_ENTROPY_NATIVE_POSIX").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Mbed TLS automatically sets PSA_WANT_KEY_TYPE_[RSA/ECC]_KEY_PAIR_BASIC
whenever "_IMPORT || _EXPORT || _GENERATE || _DERIVE" operations
are set. Therefore we just set the proper actions where required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adding myself as a collaborator for video driver category.
Add the samples/drivers/video/ to the MAINTAINERS.yml
Signed-off-by: Josuah Demangeon <me@josuah.net>
This sample demonstrates how demand paging can be leveraged to deal with
firmware bigger than the available RAM if XIP is not possible. Select
code can be tagged to be loaded into memory on demand, and also be
automatically evicted for more code to be executed when memory is
exhausted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Convention is to call k_mem_page_fault() with IRQs enabled if they were
enabled when the fault occurred.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This has two purposes: maintain the accessed and dirty page states, or
call the generic demand paging fault handler otherwise.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
A page table entry used for demand paging is always from the last level
page table and never completely zeroed. Anything else is considered
ARCH_DATA_PAGE_NOT_MAPPED.
Loaded pages use a PTE_PAGE_DESC table entry type. Paged-out pages use a
PTE_INVALID_DESC table entry type and the physical address field is
reused to hold the backing store location token value.
ARCH_DATA_PAGE_ACCESSED corresponds to the AF flag. It is initially
unset and manually set to catch when pages are being accessed and
eventually do something about it.
ARCH_DATA_PAGE_DIRTY corresponds to the lack of the AP_RO flag.
Similarly to the AF flag, pages are initially made read-only to catch
writes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Let's consider free entries as being completely zeroed. Future patches
for demand paging support will populate entries and still mark them as
"invalid" which should not be considered free. Current code always clear
entries to be freed so no issues there.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Common counter driver based on timer for MAX32xxx MCUs
To use as wakeup source wakeup-source parameter shall be
defined as below
&lptimer0 {
status = "okay";
clock-source = <ADI_MAX32_PRPH_CLK_SRC_ERTCO>;
wakeup-source;
counter {
status = "okay";
};
};
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add timer instance in device tree
Add timer yaml file
Timer0/1/2/3 are common for MAX32xxx MCUs
MAX32655 has additional Timer4/5 which are low power timers
Co-authored-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add information to the device tree if UARTE instance has a HW feature
which is the ENDTX_STOPTX short.
Add this property to all instances in nrf54hl15, nrf54l20, nrf9280
and nrf54h20.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
There is a regression caused by #76177, which
causes build to fail due to missing includes and others.
This wraps it with proper checks and fixes wifi scan call.
This also remove unused variable present in the same driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The unit tests needed to enable the hidden Kconfig
BT_BAP_BASE. Instead of adding an additional Kconfig for this,
just enable one of the roles that enable it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add null termination of ssid and psk. If user pass ssid,
psk without null terminator it will add by default.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
There were a couple of controller tests outside the
controller directory which have been moved there to
simplify the structure a bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When running cmake directly (without west, as twister does) on nix the
CMake environment paths are set and thus it does not find the
virtualenv'ed python. Fix this by ignoring the cmake environment
variables nix sets.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Replace the busy boolean flag with an atomic value.
This prevents any race conditions with the MCC implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace the busy boolean flag with an atomic value.
This prevents any race conditions with the GMAP client implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- add overlays and kconfigs files for nucleo_u083rc and
stm32u083c_dk boards.
- update testcase.yaml for CI
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
- enabled combined interrupt configuration for stm32u0x serie.
- since stm32u0 serie doesn't support SMBUS we need to avoid
use SMBHEN and SMBDEN bits register.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
we have four i2C peripherals .
- three shared between stm32u031/73/83
- One between stm32u073/83
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
check if two or three I2C instances with same irq are enabled
at same time then enable shared_interrupt handler.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Some function pointers were being passed via `%p` to LOG_DBG, and this
was causing the following issues in SOF CI with the `sparse` checker:
subsys/llext/llext.c: error: arithmetics on pointers to functions
subsys/llext/llext.c: error: incompatible types for operation (+)
This patch fixes the issue by casting the function pointers to void*.
Also fix a misleading error message in `llext_get_fn_table()`.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
With this commit, it is now allowed to register any ISR and arg
combination for the same IRQ, except the case when the exact same
ISR-arg combination is already registered.
The previous assert logic had a restriction where the same ISR could not
be registered multiple times with different arguments.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
If the dispatcher is muxing the connection i.e., so there are two
services for the same port, then mark service socket descriptor
of the service with the socket number so that "net sockets" shell
command can show a proper value for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The socket services API has a limitation where the user data is shared
between file descriptors described in the same service.
This can cause problem in DNS dispatcher where each listened socket
needs to have their own dispatcher struct set as user data so that we
can map between dispatcher context and socket. Solve this by always
have a dispatcher table as user data, and then have the actual mapping
done via the dispatcher table when receiving data to the dispatcher socket.
Fixes#78146
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Dangling hyphens at the end of a line are usually a problem, ie. you
have an "hyphenated-word" and breaking it on two line will render it as
"hyphenated- word".
This commit fixes the few occurences of such dangling hyphens.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There are numbers of drivers for different PCA(L) series chip. They
share similiar register layout and control logic. This driver intends
to unify these drivers for PCA(L)xxxx series i2c gpio expanders.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Implement an option manual reset of the PCAL64XXA to allow the external
implementation of a retention of the port expander state.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Extract method which applies the initial state in the driver
for the port expander PCAL64XXA.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
There are 6 Cortex-A55 cores on i.MX95 EVK, this SMP variant will release
all the 6 cores to run Zephyr.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The IMX95LPD5EVK-19 board is a platform designed to show the most
commonly used features of the i.MX 95 automotive applications
processor. It is an entry-level development board, which helps
developers to get familiar with the processor before investing a
large amount of resources in more specific designs.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The i.MX95 applications processor features advanced graphics and
video cores, powerful vision and machine learning acceleration,
efficient CPU performance, real-time processing, and advanced
security with the integrated EdgeLock® secure enclave to support
energy-efficient edge computing.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
On some i.MX SoCs, such as i.MX95, the System Manager is running on a
Cortex-M core to manage the hardware resources and provide services for
SCMI requests.
So add the SCMI-based pinctrl driver to support these i.MX SoCs.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The MU init should be very early for some platforms. For examples,
i.MX95 is using MU for ARM SCMI. It should be initialzied early
for next power, pinctrl, clock etc. management.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Adds "chosen,uart-mcumgr" for nxp boards that support
the secondary bootloader partitioning.
Fixes the subsys\mgmt\mcumgr\smp_svr sample.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
GRTC needs to use direct clock source path instead of system clock path
to support ELV mode for nRF54L targets.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add `DT_INST_NUM_IRQS()` to get the number of interrupt lines
of the current `DT_DRV_COMPAT`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
frmd_mcxc242 supports i2c, but it is not enabled.
Enable i2c and configure it to read accelerometer sensor on the board.
Update board documentation. Test it using sample.sensor.accel_polling.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
This PR updates all Espressif board names to meet its
original value. It also update reference links, re-organize
entries and removes unused content.
This also fixes bootloader information regarding a few boards.
IDF Bootloader was removed and these boards kept that info.
This updated it accordingly with the Simpleboot Bootloader.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
For some systems, the display peripheral or GPU requires that buffers be
aligned on a boundary for optimal performance. We already align display
buffers using CONFIG_LV_ATTRIBUTE_MEM_ALIGN_SIZE, but some applications
will rely on the definition of LV_ATTRIBUTE_MEM_ALIGN. Provide this
definition so those buffers will be aligned as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support the ccc deftgts. This also includes a function to check if
there is a secondary controller on the bus, and will transmit deftgts
after initialization or a hotjoin event.
This also adds dynamic_addr to the config_target in order to retrieve
the currently configured dynamic address to be used with deftgts.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Fixing the regression caused by 3949873886 ("Allow service to be
created with NULL host"). If the host parameter is null when creating
the HTTP service, the IPv6 socket is created by default. This can cause
issues if both IPv4 and IPv6 are enabled, like in HTTP server sample,
and the HTTP client connection is done by IPv4.
To fix this, we need to enable IPv4-to-IPv6 mapping in order to allow
IPv6 socket to serve a IPv4 connection. Allow also user to override this
if needed.
Fixes#78112
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The code was checking IPv4 address instead of IPv6.
Print also IPv6 address when rejoining the group.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This sets initial unpaged mappings for __ondemand_func code and
__ondemand_rodata variables. To achieve this, we have to augment the
backing store API.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This provides __ondemand_func and __ondemand_rodata tags for annotating
functions and read-only data that should be loaded on demand so not to
exhaust all available RAM. The demand paging mechanism will be leveraged
to load so designated code/data as needed and to evict it from memory
when unused.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Get console baudrate property from device tree to allow
proper configuration for 26 and 40 Mhz devices.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Adds a new DTS prop for i3c devices as support for the CCC SETAASA
requires prior knowledge of the target if it supports it according
to i3c spec v1.1.1 section 5.19.3.23.
This will be used as an optimization for bus initialization.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This particular qemu platform seems to run into a strange TLB exception
with unclear cause. Disable the test suite on xtensa qemu for the time
being.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The custom linker script was required because SOF needed
some extra linker sections. Other than that, the custom linker
script was identical to the common architecture script. This
commit removes the custom linker script because:
* keeping the custom linker script in sync with the
common one is troublesome.
* application-specific linker sections shouldn't be
included in the generic soc linker script. Instead,
they should be handled at the application level
(i.e: via cmake commands if additional sections are
needed or via a new, custom linker script if more
changes are needed)
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
It appears some strangeness occurs around the consume semaphore today
that causes a TLB exception on qemu_xtensa_dc233. Unclear *why* just yet
but this fixes things in CI today.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Moves the telnet client into runners/core.py as well, as this is now shared
between openocd and jlink.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This was non-trivial, as openocd is a bit weird to work with. Using only
commands passed with '-c' arguments, I couldn't get it to reliably resume
(or just not halt) the target when started. I tried using the 'sleep'
command, and various 'configure -event XX { resume }' events, but nothing
panned out, as it seems to always halt after all `-c` commands have been
run.
To avoid that, this waits for the TCL RPC port to be up, and sends a
resume command there. This works reliably.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This command runs separately from a debug server, instead of attaching
to a running server. This is both the easiest out of the box experience,
and also should be possible to implement consistently for most runners.
This commit includes an initial implementation for pyocd.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
This allows to run the test 'chan_blen_transfer' and 'loop_transfer' on
the sim3u1xx_dk board.
The functionality tested in `chan_link_transfer` and `scatter_gather` is
not (yet) supported by the Si32 DMA driver, and those tests therefore
not enabled.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This allows the users to know about the supported features and to run
(some of) the tests/drivers/dma tests on this board.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This supports the minimum of what is required to allow the AES hardware
to be used (memory to peripheral, peripheral to memory).
In addition, to pass some of the existing unit tests, it also supports
memory to memory operators.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move the transfer process codes to work context becuase
it lock the mutex, move bus reset process codes too
because it calls some common udc apis (they may add
mutex lock in future).
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
This was seen in CI
START - test_cycle_ready_CC
Assertion failed at ...tests/net/conn_mgr_monitor/src/main.c:262:
cycle_ready_ifaces: (stats.conn_count_gen not equal to 1)
NET_EVENT_L4_CONNECTED should be fired when connectivity is gained.
FAIL - test_cycle_ready_CC in 0.015 seconds
As the event wait timeout is very short (1ms) by default, increase
it to 10ms so that we will not miss the event.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add condition for KConfig Renesas FSP hal module
Move the DUAL_BANK_MODE from SOC to flash driver KCONFIG
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Features enabled by this commit:
* RNG
* Ethernet port (shell sample works without changes)
Also fixed flash addresses in docs and added the default
mapping between inputs and GPIO pins.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Fix flexspi xip configuration issue regarding code relocation
due to the order of kconfig defaults being sourced
The flexspi setup was not being relocated to an on chip location
Also remove rt1060 conf file in flash common test which changes the
code relocation location to RAM, just keep as ITCM for all M7 which
as of now all have ITCM from NXP with flexspi.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Set a default value for constant-charge-voltage-max-microvolt, matching
the device hardware default, this ensure compatibility with existing
applications that did not specify the recently introduced property.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add and verify against reference descriptors a High-Speed only 192 kHz
24-bit stereo headphones with explicit feedback UAC2 instance.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate and test both Full-Speed and High-Speed descriptors against
reference values. Verify that IAD, interface and endpoint descriptors
are not shared between Full-Speed and High-Speed descriptor sets because
the number of non-UAC2 interfaces can be different at different speeds
and thus the assigned interface numbers and endpoint numbers can differ.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate full and high speed descriptors based on UAC2 instance
properties. Fail the build if an instance does not have speed properties
or if the instance with given speed property exceeds the bandwidth
available at the selected speed.
Remove obsolete no longer used macros to determine offsets inside
complete UAC2 descriptors blob. Only speed-specific descriptors arrays
are supported.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add full-speed property to build all configuration and to UAC2
descriptor tests because this is what the tests were written for
(UAC2 class originally was full-speed only and there were no speed
properties available).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The samples were written when UAC2 class supported only full-speed and
it was not clear how the high-speed would be supported.
Add the full-speed property so the samples can work with updated UAC2
implementation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a test to check the proper support of ELF init arrays, using
the new llext_bootstrap function in place of llext_entry in the
LLEXT test suite.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit renames the perm_setup callback to test_setup and provides
the extension as an additional parameter. It also adds a test_cleanup
callback that is called after each test completes.
Setup and cleanup functions are now called regardless of whether
CONFIG_USERSPACE is enabled or not.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch refactors the macro for test case definition to simplify the
generic case. By using variable macro arguments and default-0 fields,
the most common case does not require arguments at all and tests that
have special requirements can be defined with only the necessary fields.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add support for flashing the Adafruit Feather nrf52840 Express
using UF2 over USB.
Also standardise on using the UF2 variant, so add a non UF2 variant
of the Sense board, so it can be flashed using the SWD headers.
Created flash dtsi files for both SWD and UF2. These are actually identical
for many other boards and should probably be moved to common in future.
Signed-off-by: Jacob Winther <jacob@9.nz>
Update both versions of adafruit feather nrf52840 to be variants rather
than separate boards. The aim is to provide a more consistent approach
and to remove some unnecessary Kconfig redundancy.
Signed-off-by: Jacob Winther <jacob@9.nz>
Remove unnecessary Kconfig options.
Simplify configuration by removing custom Kconfig option.
Make Kconfig generic for all boards by moving usb selection to
board_defconfig.
These changes should enable the boards to become variants instead.
Signed-off-by: Jacob Winther <jacob@9.nz>
Define DMA channels for MAX32 boards and add a new test case so that
DMA-based SPI transfers are tested.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Update hal_adi to include the fix for build errors encountered when
building SPI loopback test with DMA enabled on MAX32662.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Taking a cue from `nrfx/templates`, introduce this file so that it can
be overridden out-of-tree to add external nRF product definitions.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Only read the compensation parameters from the chip on first power up,
as they are static on the device.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Support the BME680 being on a power domain, which may not be powered at
boot. For example, Nordic Thingy53.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Due to the introduction of `shell_xxx_impl` wrapper functions in
PR #75340 and rename to `shell_fprintf_xxx` in PR #77192 we can minimize
caller overhead by eliminating direct `color` parameter passing.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Implement shell commands to access the symbol table.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Blanking On/Off calls should not return 0 when there is no panel
controller to forward them to, instead they should return ENOSYS to
signal to the application that they were not actually executed.
"device_is_ready" does check for null, but also for
"dev->state->initialized == false", so we need to isolate the
"dev == NULL" case.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
The callee-saved-registers can be helpful to debug the state of
a core upon an exception, however, currently there's no way to
access that information in user-implemented
`k_sys_fatal_error_handler()`, even though the csf is already stored
in the stack.
This patch conditionally add a `csf` member in the `arch_esf` when
`CONFIG_EXTRA_EXCEPTION_INFO=y`*, which the `_isr_wrapper` would update
when a fatal error occurs before invoking `z_riscv_fatal_error_csf()`.
Functions such as `k_sys_fatal_error_handler()` would then be able
to access the callee-saved-registers at the time of exception via
`esf->csf`.
* For SoCs that select `RISCV_SOC_HAS_ISR_STACKING`, the
`SOC_ISR_STACKING_ESF_DECLARE` has to include the `csf` member,
otherwise the build would fail.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Without the IPv6-prefix set, the net_if_ipv6_addr_onlink() check
will always fail. The packets with DIP in the local link will go
to 'try_send' code branch, which is not expected.
Signed-off-by: Shrek Wang <shrek.wang@nxp.com>
LwM2M 1.1 specification mentions that the enabler version format was
specified wrongly in LwM2M 1.0 specification, and servers only "may"
accept the old format, which no longer seems to be the case for Leshan.
The URI reference ("</>;") before the enabler version is now mandatory,
if it's missing the bootstrap discovery fails with Leshan. Another
problem are quotes around the enabler version, which seems to be
conditionally accepted only for LwM2M version 1.0. Therefore, keep the
quotes only for that version, to prevent any potential issues with other
servers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The second Security object instance for bootstrap case isn't really
needed, as the bootstrap server creates own Security object instances
anyway. As that object instance had no Short Server ID assigned, it
caused failures during bootstrap discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the HW models module to:
d2a119a9c7600ce06033a794de042e0ad9a38702
Including the following:
d2a119a 54 ECB/CCM tests: Add BLE spec examples and more printouts
17692a6 54 CCM: Correct variable names
16629b5 RRAMC: Add backwards compatible command line aliases for flash_*
52cbc36 54 AAR, CCM, ECB: Fix reset values and ECB key endianess
d51acf4 RADIO: Implement TASK_SOFTRESET
8285509 54 ECB: Correct t_ECB
4f70fba 54: AAR/CCM: Route tasks to the appropriate module
895eabb RADIO: Warn only once about TASK_SOFTRESET not being implemented
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add general purpose partition tables to prevent
putting copied version of the same table into the
every ESP32 board dts.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
`conn_auto_initiate()` starts a bunch of controller procedures (read: HCI
commands) that are fired off right after connection establishment.
Right now, it's called from the RX context, which is the same context where
resources (cmd & acl buffers) are freed. This not ideal.
But the procedures are all async, so it should be fine to schedule this
function on the system workqueue, where we have less risk of deadlocks.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
On 32-bit x86, it was supposed to print the first argument to
the function during stack trace. However, it only works when
code optimizations are totally disabled (i.e. -O0). As such,
printing the args is not meaningful to aid with debugging.
So change it to simply print the function address, the same
as x86 64-bit.
Also, since unwind_stack() has exactly one caller, make it
ALWAYS_INLINE to skip a function call.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The number of modules is different for each soc.
There is a macro in the HAL that should have been used.
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
Some events needs to be handled with a very low latency constraint.
If the system is in deep sleep, exit latency from this low level state
exceeds sometimes the maximum latency constraint of these events.
Before suspending the system, select which events is happening sooner,
kernel events or normal events.
CPU will be up just before the next event occurs taking into account the
exit latency of the current power state
Change also the policy event API to take as argument absolute time in HW
cycles instead of time in us
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Remove all entries that as not being used.
This also update hal to re-enable warning flags
as such as -Wno-unused-variable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Since the `_impl` naming convention is intended for internal use only,
renaming these functions to the `shell_fprintf_xxx` variant is
more suitable for calls outside the module:
- `shell_info_impl` to `shell_fprintf_info`
- `shell_print_impl` to `shell_fprintf_normal`
- `shell_warn_impl` to `shell_fprintf_warn`
- `shell_error_impl` to `shell_fprintf_error`
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Currently if initializing one of the registers fails, the return
error gets overwritten by can_set_timing(). Fix by forwarding the
error directly. Also remove unnecessary done label.
Fixes#73586.
Original patch by melvinvdb from #73714.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Mcp251xfd devices occasionally fail to initialize after board
resets. It was experimentally found that adding a 5ms delay fixes
the problem.
Fixes#73586.
Original patch by melvinvdb from #73714.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Check the remaining buffer length is not less than
required data length before pulling data from the
buffer.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
This reverts commit a2bb323861.
nRF9280 does not suffer from the same bit 28 hardware bug as nRF54H20.
This workaround must be disabled to make the DCACHE function properly.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
VPR addresses are platform-dependent, so let's use a common symbol -
CONFIG_NRF_PLATFORM_HALTIUM - to cover both nRF54H and nRF92 series.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
PMIC service should be supported on Application and Radiocore, whereas
DVFS service is currently unsupported.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Booting VPRs requires changing the default value of CONFIG_RV_BOOT_HART.
This must be reverted (back to zero) for a future nRF9230 SoC revision,
which will align more closely with the RISC-V spec.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add overlays for booting PPR on the `nrf9280pdk/nrf9280/cpuapp` target.
They are identical to the nRF54H ones because of similar DT structure.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Make actual document take all vertical space available so that footer is
always at the bottom, even when the page has very little content.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There is likely no need for the footer to be so prominently asking folks
to report issues with a page based on the number of issues that have
been reported in the past year or so.
This change makes the footer less crowded and saves some vertical space.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Production version of the nRF54L15 SoC needs reset reason
to be cleared before going into system off.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Assembly in power_down() in power_down.S already defines data and
code to be locked in cache when powering down SRAM. Instead of adding
another such location in power.c, move the hpsram_mask[] array into
power_down.S. This fixes hard to debug failures when shutting down
the ADSP.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add a check so that we hopefuly keep all zephyr-app-commands free of
references to non-existing paths.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
STM32CubeProgrammer is now selected as the default runner for all STM32
official boards when 'west flash' is invoked.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Update all STM32 official boards Doc Flashing section.
Correct some typos and remove outdated information.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Add STM32CubeProgrammer where it is not available, & make it
default flashing method by placing it 1st in board.cmake
Before this change, the west runner that's selected when calling
'westflash' without the '--runner ...' option is kind of arbitrary
& depends on which runner is 1st in board.cmake file.
Another reason this change is needed is that STM32CubeProg is the only
available way to check/modify Option Bytes, and to flash code to
external Flash on many STM32 boards.
This change does not affect 'west debug' behavior, which defaults to
the debugger (OpenOCD/JLink) that is included first in board.cmake
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Wait until the erase operation triggered by `qspi_erase` completes
before returning. This aligns with the behaviour of other flash drivers
like `spi_nor` and `soc_flash_nrf`.
A delay is added to the `qspi_wait_while_writing` to prevent the check
from monopolising the CPU.
Signed-off-by: Jordan Yates <jordan@embeint.com>
cdc_acm_fifo_fill() logged warnings about dropped data
when they in fact just couldn't be sent (due to connection
of filled buffer). Not being able to send (all) data is
a valid behaviour and data isn't dropped. Return value
shows how many data was accepted (which can be zero).
Logging will now instead only inform data can't be sent
due to the respective issue (connection not ready/ buffer full).
Signed-off-by: Martin Koehler <koehler@metratec.com>
Multiple improvements of the `upload_test_results_es.py` script:
* JSON objects flattening.
This feature allows `twister.json` file preprocessing to simplify
its Elasticsearch index structure for complex hierarhical objects,
for example with memory footprint, or code coverage data.
A new command line option `--flatten` is added to change testsuite data
structure in regard of one of its list objects: either `testcases` or
`recording`, so each item there becomes an independent data record
inheriting all other testsuite properties, whereas the children
object's properties are renamed with the parent object's name
as a prefix: 'testcases_' or 'recording_' respectively.
Only one testsuite property can be flattened this way per index upload.
Other children objects will be treated accorging to the index structure.
Related new command line options (with help text explanations):
`--flatten-dict-name`,
`--flatten-list-names`,
`--flatten-separator`,
`--transpose-separator`,
`--escape-separator`
* A new command line option `--transform` is added to allow regexp group
parsing in string propertites extracting additional derived properties.
* A new command line option `--exclude` is added to exclude testsuite
properties not needed to store at Elasticsearch index.
* Branch name `--run-branch` and Workflow ID `--run-workflow` command
line options as additional key fields to allow data from different
branches, workflows and triggering events in the same index.
* A new command line option `--map-file` is added to apply
an explicit index structure to the `twister.json` input data.
* Add bulk operation timeout parameter for heavy/long uploads.
Other changes:
* batch upload error handling and logging;
* inline documentation improvements;
* some corner case fixes on empty objects.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add support for running the audio BSIM tests on the
nrf5340bsim board.
This expands the tests we run in CI.
To support all tests with the hci_ipc sample for the netcore,
it is updated to support a bit more while still fitting on the
netcore on the nRF5340 series.
The behavior of advertisement seems to differ a little bit,
which required the bap_unicast_server_test.c to update how it
restarts advertisements.
Two broadcast tests that are passing on the nRF52 BSIM is also
failing due an assert. This should be investigated at a later
time.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Get rid of the switch statement and use an string array
for the cause instead. This saves about ~600 bytes.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Rename `cause_str` to `z_riscv_mcause_str` and make it non-static,
so that it can be used in user-implemented `k_sys_fatal_error_handler`.
Also, this function should return a constant string, so add `const`
to it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Relocate the logging of mcause & mtval from `_Fault` to
`z_riscv_fatal_error_csf` so that they are always printed
upon exception.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add a definition for HCI version 6.0, now that the new core specification
version has been released.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
There's a generally available bt_hci_get_ver_str() function, so use that
instead of defining our own.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARC.
Replace soc_early_asm_init_percpu() with platform_reset()
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce soc and board hooks to replace arch specific code
and replace usages of SYS_INIT for platform initialization.
include/zephyr/platform/hooks.h introduces the hooks to be implemented
by boards and SoCs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mention that the GNSS periodic config APIs have been removed in the
release notes for 4.0
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The GNSS device driver API includes an API for setting the periodic
power configuration at runtime. This API is not used in-tree, and is
antithetical to the pm device subsystem.
The periodic config configures the GNSS to search for a fix for a
given amount of time, then suspend itself for a given amount of time,
and repeat this pattern. The issue with this is that both the
application and the GNSS modem itself can be in a conflicting power
state, where the device is resumed (pm device), but actually suspended.
Applications which wish to periodically resume/suspend the modem, even
in more sophisticated ways like suspended after first fix, can simply
implement this logic, using the pm_device calls and the GNSS callbacks.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Status errors previously logged an error, but didn't fail the running test.
This commit changes that
and introduces a new StatusAttributeError to use there.
One test is modified so it follows proper status form.
One test for the new error has been added.
Status errors now will properly mark the Instance as ERROR
and not run TestCases as SKIP.
This necessitated some code layout changes in runner.py
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Change ensures that `dwc2_handle_xfer_next` would notify upper layer if
`dwc2_tx_fifo_write` fails. This is necessary to ensure that upper layer
is aware of the failed TX for the submitted transfer. It also ensures
that the submitted transfer is removed from the TX queue.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
As the allocation is run in system workqueue context, it can
cause problems if waiting forever when allocating net_pkt.
Fixes#77935
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the allocation is run in system workqueue context, it can
cause problems if waiting forever when allocating net_pkt.
Fixes#77935
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is hard to justify keeping the version admonition/disclaimer eating
up so much real estate on all documentation pages. It was useful when
search engines tended to index old versions of the documentation and
reminding people where they "landed" was a good idea.
Now, it is just taking up space and we can safely assume that people
explicitly interested in older releases will find their way to the right
place, as our version selector is in a very similar spot to how other
projects do it.
Note that the admonition will still be included on "released" versions
of the docs, since the "there might be a more current version of this
page" admonition is actually useful to have.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Move the network buffer tests to tests/lib/net_buf as their implementation
now lives outside of the networking subsystem.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the network buffer documentation from networking to services as the
implementation now lives outside of the networking subsystem.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the net_buf implementation from the networking subsystem to a library
as they have no dependency on the networking subsystem.
Network buffers are used in subsystems outside of networking
(e.g. Bluetooth, USB).
Fixes: #36374
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Enable CACHE64 block used by FlexSPI.
2. LPCAC cache is already enabled by SystemInit which
is called earlier
3. Configure the FlexSPI clock when running in XIP mode
as we cannot rely on the driver setting this up as it
may not be enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. The boards always boots from internal flash. However it does
have an external QSPI that can be used to store Zephyr.
Add a variant to support running Zephyr from QSPI Flash.
Running Zephyr from QSPI requires a bootloader like MCUboot
to be pogrammed to internal flash.
2. Create a common dts file to add features that are enabled for
CPU 0 that is included by both vairants i.e internal flash (default)
and QSPI variant.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Include compile of the flash file when FlexSPI_XIP is enabled
even when the FlexSPI driver is not enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When virtual interface is being started or stopped so when the
interface is brought up or down, check the return code and pass
it to net_if_up() or net_if_down() calls.
This helps to avoid printing success status even if the interface
up/down failed at the virtual interface level.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The legacy bridging code prevented normal IP traffic to the
bridged Ethernet interfaces. This is not intuitive and differs
how bridging setup works in Linux. This commit changes that and
creates a separate virtual interface that is doing the actual
bridging. This enables the bridged Ethernet interfaces to work
normally and provide IP connectivity.
How this works in practice:
* User needs to enable CONFIG_NET_ETHERNET_BRIDGE
* User needs to have a device with more than one Ethernet
interface
* After booting, the net-shell or program API can be used
to add interfaces to the bridge like this.
net bridge addif 1 3 2
where the 1 is the bridge interface index and
2 and 3 are the Ethernet interface indices.
* The bridging is then finally enabled / started when the
bridge interface 1 is taken up
net iface up 1
* If bridged interfaces are removed from the bridge (minimum
of two interfaces are needed there), then the bridging is
disabled automatically. The bridge interface stays up in
this case and can be taken down manually.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This reverts commit 518de763a6.
This commit switched nrf5340 devices to use the icbmsg
IPC backend.
Unfortunately this backend is not currently supported
in the nrf5340bsim target (it is not properly configured)
which results in a segfault during its initialization.
As this issue is currently blocking CI for all BT development
in Zephyr, let's revert this provisionally while we add
support for it.
See
https://github.com/zephyrproject-rtos/zephyr/issues/78099
for more info.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The bits allocated for each aggregator level only need to be enough to
encode CONFIG_MAX_IRQ_PER_AGGREGATOR, instead of the combined number of
IRQs from all aggregators in that level.
Add additional check for L3 interrupts as well, if it is enabled.
Updated the assert in `z_get_sw_isr_table_idx()` to be more verbose.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
- Update `MAX_IRQ_PER_AGGREGATOR` to 1024 to match with the
devicetree
- Update `2ND_LEVEL_INTERRUPT_BITS` to 11 bits to
be able to encode the L2 IRQs.
- Update `NUM_IRQS` to 1036 (L1 has 12, L2 has 1024)
Update the `MAX_IRQ_PER_AGGREGATOR` config in testcase
accordingly, so that it won't overflow the configured bits.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Removes constant error logging when parsing IPD headers in active mode and
waiting on remote IP and port. Currently an error message is logged for
every character in the remote IP and port until the full length obtained.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Add the driver of diplay controller ist3931, i2c/spi
128x64 monocolor display driver. Only the i2c mode
driver of the controller is implemented and tested.
Signed-off-by: Shen Xuyang <shenxuyang@shlinyuantech.com>
Minor updates the atomic_test* functions to indicate
that only the get/clear/set part of the functions are
atomic, and not the test part. Also made the wording
and pattern of the functions more similar.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add section which describes how Coresight STM logging works and how
to use it. Currently this feature is supported only on nrf54h20.
However, most parts of the solution is not nrf54h20 specific and
other cores with Coresight can use it.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add standalone STM configuration to the sample.
Add configuration which instead of STM uses local UART for logging.
This configuration can be used to compare performance and flash
usage for various logging modes.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add snippet which allows configuration of logging using STMESP
frontend using standalone mode.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for standalone mode where data written to STMESP is
decoded on chip to a human-readable strings.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extend ETR buffer handler to support standalone mode where data from
ETR buffer is decoded and printed in human readable format on UART.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add test for message demultiplexer from STPv2 data stream generated
by STMESP frontend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add module which demultiplexes stream of log message which are
encoded into STPv2 stream by log_frontend_stmesp. There are 3 types of
messages that can be present in the stream:
- Log message (starts with DMTS32, followed by Dx and closed by FLAG)
- Tracepoint (FLAGTS or DMTS32)
- STM HW event (DMTS8 on 0x80 master and 0x00 channel)
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add sample that demonstrates logging using Coresight STM and ETR buffer
handled by the application core. Application is using sysbuild and 2
cores: cpuapp and cpurad. cpuapp is logging to STM and handling ETR buffer
where data from STM is collected and cpurad is only logging to STM.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add module which is dumping data from Coresight ETR buffer. Coresight
ETR is a sink for STMESP data. This module is specific to Nordic SoC
because it does not access ETR registers. Instead it is using Nordic
specific module (Trace Buffer Monitor TBM) to monitor amount of data
in the ETR buffer (which is a circular buffer).
Data from that buffer is sent over UART (in future it may be extended
to other transports). In future, module will be extended with option
to process STM data on chip.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add new binding and a node to nrf54h20. Update Kconfig and nrfx_config
to include nrfx_tbm driver when node with that compatible is enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In order to get all data from STMESP written to ETR and processed
on time we need to write dummy data before sleep.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add header with STMESP register set and set of inline functions
that can be used to write data to STMESP.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
As there are more frontends coming in the future move existing
frontend to the dedicated directory (like backends).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Change to depend on LOG_DICTIONARY_DB which is broader than
LOG_DICTIONARY_SUPPORT which is set only when log_output
supports dictionary mode. However, it is possible that
log_output is not used when dictionary mode is used. Database
generation is always enabled when dictionary mode is used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add test which validates behavior of the UART driver when there
are errors on the receiver line.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
When rx_flush() was called with NULL buffer it was an indication to
drop data from the FIFO. However, it is still important to get the
correct amount of dropped data because when PPI+TIMER are used to
count bytes those flushed bytes are also counted (because each
byte generates RXDRDY event). If those bytes are not counted then
total amount of reported bytes is not correctly aligned with bytes
counted by TIMER.
Reworking rx_flush() to correctly count number of dropped bytes and
then add this flushed bytes to the total amount of RX bytes
reported to the user in RXTO event handler.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
When interrupt driven instance is using only TX then low power mode
is automatically enabled and then TXSTOPPED interrupt is disabled in
idle so uarte_nrfx_irq_tx_ready_complete() was returning wrong value.
Adding a dedicate flag which holds information is user enabled TX
interrupt.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Callback was set in uart_async_to_irq_rx_enable() which is only called
when RX is enabled. Callback shall be called in the init function.
uart_async_to_irq_init() signature changed to take device as the
input argument instead of data and config for the adaptation layer
(which can be retrieved from the device). Device is needed when
setting a callback during the initialization.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adaptation layer was not correctly handling RX error and when error
occured uart_irq_is_pending() was still returning false.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
According to the API specification when RX error occurs receiver
shall be disabled. Adding missing disabling to the error handler.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
Currently function `z_nrf_grtc_wakeup_prepare()` should be available
only for the GRTC manager (`CONFIG_NRF_GRTC_START_SYSCOUNTER` is active).
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add functions for local domain suspend to RAM. Add matching resume
procedure. Add pm_s2ram function for determining source of reset.
Add preserving NVIC and MPU state in retained RAM when CPU is powered off
during S2RAM procedure.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
If the dynamic address is not the same as the static address during
setdasa, perform the reattachment.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
All I3C v1.1+ devices are required to support GETCAPS. Remove BCR
check as it was the requirement for v1.0.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The ESP32 Wi-Fi driver previously did not support APSTA mode,
enabling AP mode would disable STA mode and vice versa.
Support for APSTA has been added by introducing additional
network interface: one for STA (Interface 2) and one for
AP (Interface 1). The CONFIG_ESP32_WIFI_AP_STA_MODE option in
Kconfig now allows enabling or disabling this support.
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
Allow application to register certain HTTP request headers to be stored
by the server. These stored headers can then be accessed from a dynamic
resource callback.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
The `build_args` argument was not respected when generating west
commands. This led to an error in the documentation of qemu network
setup.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add documentation for the new LLEXT APIs that allow to call the
initialization and cleanup functions of an extension.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
llext_bringup() and llext_teardown() are intended to be used to call the
extension's own initialization and cleanup functions, respectively. They
are meant to be called by the developer after loading an extension and
before unloading it. The list of function pointers to be called is
obtained via the new llext_get_fn_table() syscall, so that they are
compatible with user mode.
llext_bootstrap() is intended to be used as the entry point for a thread
created to run an extension, in either user or kernel contexts. It will
call the extension's own initialization functions and then an additional
entry point in the same context (if desired). The same function can also
be called directly in the main thread, if only initialization is
required.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Load the .preinit_array, .init_array and .fini_array sections in ELF
files. These sections are arrays of function pointers that are filled by
the compiler with the addresses of functions that need to be called at
startup or termination by the loader, such as C++ constructors and
destructors.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit removes the `hifive1` board from the `platform_exclude` list
for the `drivers.gpio.1pin` pin.
The root cause for why this platform was disabled was fixed in the recent
Renode version upgrade in the CI image.
Fixes#69350.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for use of FAKE_ENTROPY_NATIVE_POSIX as entropy
driver for the Controller on BOARD_NRF54L15BSIM.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Extend tests with case where extension is copied from RAM buffer
into filesystem and then loaded from filesystem.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
This patch extends LLEXT shell commands with support for loading
LLEXT from a filesystem. Use of the command requires absolute path
to the llext file.
Example use:
`llext load_llext hello_world /lfs/hello_world.llext`
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Introducing `llext_prepare()` and `llext_finalize()` APIs
that are invoked and the beginning and the end of the `llext_load()`
function.
The purpose of these functions is to bring possibility of initializing
loader before it is used and uninitialize or clean up when
it is no longer needed. Both functions are optional.
The buffer loader has been aligned to methods introduced in the patch.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
By default, normal memory is set readable+writable and not executable.
Adjust those permissions according to each region:
LLEXT_MEM_TEXT --> K_MEM_PERM_EXEC
LLEXT_MEM_DATA, LLEXT_MEM_BSS --> K_MEM_PERM_RW
LLEXT_MEM_RODATA --> K_MEM_PERM_RO aka 0
This must be done only at the end of an LLEXT load operation as memory
needs to remain RW for reloc processing, etc.
And while at it, flush/invalidate the cache accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
It is sometimes necessary to modify/update memory permissions on some
pages, especially with LLEXT where some allocated segments have to be
executable.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
`CLOCK_CONTROL` subsystem being selected directly at family level,
remove it from individual board configurations.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rather setting the driver default in soc, make it directly at symbol
level rather than soc and clean up redundant `select` occurrences.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
CLOCK_CONTROL subsystem is expected to be enabled systematically on all
STM32 devices.
Make it a series default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
GT911 driver was reading an additional touch point into the stack
defined touch point array, causing an out-of-bounds write on the stack.
Fix this issue by adjusting the limit on the for loop, and add a note
to the driver as to why we don't need to validate the number of points
reported for future developers
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The default Max A-MPDU length is 8191 shown in the VHT Cap Info from
SAP's beacon/Assoc response, and this length is read from
hapd->iface->conf->vht_capab. It will lead to the AMPDU only contains
5 packets and the throughput is only 60Mbps for 1x1 HE case in 5GHz.
Change the default vht_capab to VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX
(1048575), and the throughput can be increased to 83Mbps.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Use the correct define for checking if the DCDC converter shall be
enabled.
This resolves the opposite behavior where boards that enable the DCDC
converter uses the LDO and boards where LDO is used they enable the
DCDC.
Fixes: e189fb0720 ("soc: nordic: nrf52: add support for DT-based
regulators config")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Changed NET_CONFIG_CLOCK_SNTP_INIT depends on to require
POSIX_TIMERS instead of the deprecated POSIX_CLOCK
Signed-off-by: Luca Arato <luca.arato@secomind.com>
A connected state was reported as a disconnected state.
This led to wrong reports of the connected state to all systems
relying on it.
Signed-off-by: Lukas Gehreke <lk.gehreke@gmail.com>
Clarify the HTTP service definition so that the host parameter can
be set as NULL in which case the server will listen all addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Without this it is not possible to serve both IPv6 and IPv4
connections if service host is NULL.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow NULL host parameter when creating HTTP service. This means
that the socket is created without specifying binding address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make lists of code samples more compact (a lot of vertical real estate was
being wasted) and more visually appealing.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This link probably never worked. This commit fixes the relative
URL to properly point to where Doxygen docs live.
Fixes#78016.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled Network shell and Ethernet L2 interface
with XGMAC driver in CLI application
Enabled MDIO shelll with dwcxgmac mdio driver.
Enabled TCP and UDP over IPV4.
Added intel_socfpga socdk support for echo_client and
echo_server sample applications.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Added XGMAC0, XGMAC1, XGMAC2 device nodes in
intel_socfpga_agilex5 dts file with default
parameter values and default device node status
as 'disabled'.
Signed-off-by: Santosh Male <santosh.male@intel.com>
ethernet driver
This driver is capable of supporting basic features
of synposys dwc-xgmac ethernet MAC IP. Basic features
includes,
1. Tx and Rx, multiple Tx and Rx DMA channels, multiple
Tx and Rx queues
2. Check Sum Offloading on Tx and Rx for IPv4, IPv6,
TCP, UDP and ICMP packets
3. 10M/100M/1G speeds, Autonegotiation, Link speed
configuration, Promiscuous mode, Full/Half
duplex configuration
4. Added source files for synopsys dwc xgmac mdio driver.
synopsys dwc xgmac mdio driver fetures includes:
It supports clause 22 of IEEE 802.3 for ethernet PHY devices
management.
5. Extended mdio shell support for dwcxgmac mdio driver.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Use fallbacks in codec cfg functions in the BAP broadcast
babblesim tests to avoid unnecessary noise in the logs of
the tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add to_str functions for context, parental rating, active state,
codec cap freq, codec cap frame duration,
codec cap channel count and location.
The remaining values are just numeric values and does not
need a to_str function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix `k_poll()` loop example by using separate `if` blocks instead of
`if`-`else`-chain to ensure all events are handled, even if multiple are
active at the same time.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
LPUART without modem support is used in some NXP socs. Build error
occurs for such socs because of accessing unavailable register.
Fix it by adding #if directive for checking modem support availability.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add OSCERCLK, MCGIRCLK, and MCGPCLK clock sources definitions
to the kinetis_sim.h in include dt-bindings.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Devicetree binding for NXP mcxc oscillator is not available.
Add the binding to be able to configure the oscillator in devicetree.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add configuration settings for the FOPT, FSEC, and flash configuration
offset to the FTFA module binding.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Charging a battery has three phases (compare Figure 8-2 in
https://www.ti.com/lit/ds/symlink/bq25180.pdf)
First is a pre-charge phase, then a constant current, then a constant
voltage phase.
During the pre-charge phase, the battery is only charged with a very low
current, to not damage the cells, because they are below a threshold,
that is considered healthy for the battery and need to be brought back
up to a healthy voltage.
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
The battery charger will stop charging the battery if it believes,
that is is completely charged. If the battery drops below a certain
voltage threshold, then the battery charger starts charging the
battery again.
For the bq25180 the threshold can only be one of either 100mV or
200mV below the VSET voltage.
See table 8-16 Bit 5 in https://www.ti.com/lit/ds/symlink/bq25180.pdf
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
The linear battery charger will charge the connected battery up
to a specific voltage. This is different depending on the chemistry
of the battery. Most LiPo Batteries have a nominal voltage of 4.2V,
which is why the default voltage of the bq25180 is 4.2V.
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
Features enabled by this commit:
* M7 core available with or without the Arduino MCU-based bootloader by
correctly initializing the external clock source.
* All LEDs, relays and the user button are mapped into the device tree
(samples/common/blinky works out of the box).
* USB can be used in ACM mode (samples/subsys/usb/cdc_acm works without
changes). The default Zephyr console is configured to use cdc_acm_uart0
that in turn is assigned to the only USB port available.
Also enable USB stack to make sure that the console is available by default
and twister builds don't fail with missing device and added the default USB
vendor (0x35d1 Finder SpA) and product (0x0164) numbers to match the ones
used in the original product.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add a sample that presents how the custom nrf2_clock_control API
introduced for nRF54H20 can be used for the various clocks which
are supported by it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add custom clock_control API for nRF platforms that allows requesting
clocks with specified minimal required attributes (accuracy, precision,
and frequency). Provide an implementation of this API for FLL16M, HFXO,
HSFLL, and LFCLK controllers in the nRF54H20 SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add bindings for nrf-fll16m and nrf-lfclk and update in-tree nodes
and boards to use them in place of the fixed-clock binding.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The HFXO and LFXO oscillators have properties which need to be
specified in the devicetree. These properties are used by clock
controllers, which get these properties from the devicetree.
The BICR also contains these properties. For now, the properties
are duplicated in the bicr node in the devicetree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add references to clock controllers so users can obtain
those for particular peripherals with DT macros like
DT_CLOCK_CTRL()
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
It has been observed that using a CMUX max frame size of 127
causes FCS errors; smaller or larger works. This commit sets the max
frame size to the modem's default value.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
U-Blox LARA-R6 was added to modem_cellular, and an additional state
was introduced where the UART baudrate is changed if the modem supports
it
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Move some STM32 drivers related Kconfig symbols from `config`
to `menuconfig` when driver options depends on these symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This driver is mostly rewritten from scratch, with some parts borrowed
from the usb_dc_rpi_pico driver implemented by Pete Johanson.
This driver does not use any function from RPI PICO HAL and actually
could be furter improved to not use any defines or types from the HAL as
they are confusing and overdo it with volatile qualifiers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The STM32 SPI driver, `spi_ll_stm32.c`, reads the clock frequency via
`clock_control_get_rate()`. The first `clocks` index is used as subsystem
argument if there is no second index, but this is not the source clock for
SPI 1, 2, and 3.
This causes the prescaler value calculation to be incorrect, resulting in a
frequency potentially above the `spi-max-frequency` value.
Add clock source for SPI instances 1, 2 and 3, that matches the default
clock configuration register reset value, which resolves the issue.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This commit introduces a new Kconfig option `CONFIG_SRAM_RETENTION_MODE`
that allows the configuration of SRAM retention mode during the
initialization phase of the firmware boot-up process. By default, the
retention mode is enabled to maintain the existing behavior. However,
this option provides the flexibility to disable the retention mode if
needed, without modifying the Zephyr codebase.
The SRAM initialization functions `hp_sram_init` and `lp_sram_init` in
`sram.c` have been updated to conditionally set the retention mode based
on the value of this Kconfig option.
Additionally, an unused macro `DELAY_COUNT` has been removed from
`sram.c` to clean up the code.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
There is no clear way for a candidate to assume the role of Maintainer
if the candidate is neither a Contributor nor a Collaborator. To avoid
disputes and confusion, candidates who are neither Contributors nor
Collaborators must be approved by the TSC before they can assume the
role of Maintainer.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Let's disable the default seeding done by the native_posix
entropy driver to allow the normal simulation initialization
of the random number generation to take place.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a new kconfig option which can be used to disable
the default seeding of the host standard library random
generator by this driver.
This allows some other component to do so without this component
default initialization interfering.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Zephyr drivers have typically one log level defined per class. The video
drivers were making exception. This adds the missing log level for video
drivers.
Since all headers had to be modified, this also:
- Update the log initialization to the new syntax from 5e34681
- Sort the #include list to something like #41543
Signed-off-by: Josuah Demangeon <me@josuah.net>
When scanning and connecting in parallel with
CONFIG_BT_SCAN_AND_INITIATE_IN_PARALLEL enabled, a Bluetooth controller
may choose different scheduling approaches based upon the provided
parameters.
Nordic's SoftDevice Controller performs better when both roles
use the same scan window and scan interval. To help customers
choosing the right configuration, this should be documented.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The function took the uri as a `char *` but is in fact
not a null terminated string so change the type to uint8_t *.
Add a check fro uri_len == 0 before doing uri_len - 1
Changed the found check to just check the first octet rather
than the more costly strlen.
Fixed the type of the iterator
Add a break in the loop as we only need to find one ":"
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
since stm32h7.dtsi is already include in st/h7/stm32h743.dtsi
we don't need to include here again.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
A warning was issued in the build as the rtio tx and tiny_tx buffer
pointers are now labeled const. The internal API expects mutable buffers
so an explicit cast is needed here to avoid the warning.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add information about main(int, argc **) in places where the documentation
stated that only parameterless main could be used
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add bootargs support to zefi. This implements
get_bootargs() when both efi and bootargs are
selected in config.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Zefi was only including include/zephyr but not the generated include
directory that contains autoconf.h. This commit fixes that.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add bootargs support for multiboot. This
implements get_bootargs() when multiboot and
bootargs are selected in config.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add support for passing args to main(). The
content of bootargs is taken from get_bootargs()
which should be implemented for each loader and
then its split into args and passed to main.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Added links pointing to the Dedicated image build targets
from Optimization tools page for ram_report, rom_report, footprint,
puncover, and pahole.
Reported by @markaj-nordic.
Signed-off-by: Grzegorz Ferenc <Grzegorz.Ferenc@nordicsemi.no>
do a cold reboot by default if no option is provided
for `kernel reboot`, instead of requiring to
type `kernel reboot cold`.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Move the lower bounds check of the enum value to a BUILD_ASSERT and make
sure the enum type is an unsigned integer.
Signed-off-by: Adrian Friedli <adrian.friedli@husqvarnagroup.com>
Add a description of the feather connector GPIOs. This enables a
featherwing shield to reference the GPIO by its label.
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Define the feather_spi SPI bus, which points to the corresponding
SERCOM. This bus label can be used by the featherwing family of
shields.
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Fix scan_update() implementation for missing flags clear
that prevented starting scanning after previous attempt to
start failed due to parameters being rejected by the
Controller.
Example, attempting to start coded PHY scanning with a
Controller implementation that does not support it can fail,
but attempting again without coded PHY scanning should
succeed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The TBS client callbacks are just informative so we
provide the information to multiple listeners.
To support this for the long strings, the function
handle_string_long_read was refactored.
This also allows for multiple users of the TBS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the encrypt state was changed via
bt_bap_scan_delegator_mod_src then we didn't set the bad
broadcast code correctly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bsim test that verifies the behavior when the
assistant provides an incorrect code to the broadcast
sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function had marked the type as char *, but it was in fact
not a string but rather a uint8_t array.
Marked the type properly and added a cast when using it with
bt_tbs_remote_incoming.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CAP commander used bt_audio_valid_ltv which required
BT_BAP_STREAM to be enabled, but the CAP Commander does not
need BT_BAP_STREAM to be enabled.
Moved the function to audio.c which is always compiled for
the CAP Commander, thus removing the requirement for
BT_BAP_STREAM and the accompanying bt_bap_stream.c file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The UTF8 implementions for both client and server
both use the utf8 API which require CONFIG_UTF8.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function had marked the type as char *, but it was in fact
not a string but rather a uint8_t array.
Marked the type properly and added a cast when using it with
strings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Require the presence of the nrf-regtool package as well as its exact
version, failing the build whenever the required version is not found in
the system.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
YD-STM23H750VB board has 128 Kbytes of flash memory, 1 Mbytes of SRAM
and 16 Mbytes onboard SPI norflash.
Signed-off-by: John Sanpe <sanpeqf@gmail.com>
Modify the CAP stream callbacks so that the application
callbacks are called before the CAP initiator.
This allows the application to abort/cancel a procedure
before we send out any future request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Currently DMA overrun errors are ignored. Forward the error
to the user using the UART_RX_STOPPED with UART_ERROR_OVERRUN
reason.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
If an overrun happens the user may decide to stop the dma which
unsets the DMA line. Currently, the line is always re-enabled after the
callback.
Switch the order around to fix the problem. Also, always reset the line
even if the user doesn't provide a callback.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Remove parts of the documentation for the nrf9280pdk board
that were copy-pasted and added by mistake.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Use the RTIO work queue to fake the i2c submit calls for drivers which
haven't yet implemented the API. Applications can change the size of
the work queue pool depending on how much traffic they have on the buses.
Signed-off-by: Yuval Peress <peress@google.com>
Fixed build warnings of ADC for MAX32662 and MAX32672 SoCs on
hal_adi size, this commit fetches it.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Right now "lp5562_led_blink" unconditionally find and assign a engine
that is not executing at the moment. This is an issue, if 3 "led" are
already using an engine. That is a call to "lp5562_led_blink" could
terminate with error, even if the "led" is already using an engine.
This commit fixes this issue by adding a check to see if engine is
linked and reuse it, otherwise assign a free engine.
Signed-off-by: Anuj Pathak <anuj@croxel.com>
Remove the toolchain_ld_<base|baremetal|cpp> macro as all the macro
handling is now done through the use of linker properties.
Keep support for calling the old macros for out of tree toolchains
which have not been updated to the new property approach.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move linker flag setting from toolchain_ld_baremetal() to linker flag
properties as to follow the principle used in previos commits and from
PR#24851.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Transition the linker flag for the toolchain_ld_base and
toolchain_ld_cpp macros to linker flag properties.
This work follows the toolchain abstraction started in PR#24851.
toolchain_ld_base() was intended for base linker flags, but has slowly
become a 'set-any-linker-flag-here' and thus having several
`if(<check>)` or `<func>_ifdef(<check> ...)`.
Move the check to the top-level Zephyr CMakeLists.txt file, so that it
becomes cleaner which part is responsible for setting a value, and then
move the actual value (the linker flag) definition to the linker flag
property location.
It also helps adding support for new linkers, as it becomes clearer
which linker flags Zephyr always expects, for example `base` and
`cpp_base`, as well as those settings which are targeting for a given
purpose, such as linker sort alignment.
It also makes it clearer when those are used, for example in top-level
CMakeLists.txt with CONFIG_LINKER_SORT_BY_ALIGNMENT compared to this
information being buried in a linker support macro.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To ease the use of linker flag properties and to simplify the use of
generator expression then an optional PROPERTY argument has been added
to the zephyr_link_libraries() function.
This means a call such as:
zephyr_link_libraries($<TARGET_PROPERTY:linker,<property-name>)
can instead be simplified to:
zephyr_link_libraries(PROPERTY <property-name>)
Thus making intention clearer and keeping the complexity and minimizes
the risk of typos when writing generator expressions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The selection of the runtime library when using LLVM has already been
done in llvm/target.cmake and passed to the toolchain_ld_base() function
through the global TOOLCHAIN_LD_FLAGS setting.
The only reason this haven't been noticed is because of CMake's built-in
symbol de-duplication feature.
Remove the redundant runtime library handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The support of PROPERTY_LINKER_SCRIPT_DEFINES has been broken since
the transition to CMake in 12f8f76165.
The intention was probably to allow users / projects to adjust
PROPERTY_LINKER_SCRIPT_DEFINES by setting a CMake cache variable.
The implementation tests for the CMake variable (local scope or cache)
PROPERTY_LINKER_SCRIPT_DEFINES, but it never uses such CMake variable.
Instead it uses a CMake global property named
PROPERTY_LINKER_SCRIPT_DEFINES. CMake variables and CMake global
properties are two very different things, and therefore the current
implementation has never worked. The fact that no one has never noticed
this flaw, means that the feature has never been used as intended.
Simplify the code by removing the use of the global CMake property and
instead set the value of the property on the linker script
pre-processing invocation.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The macro `toolchain_cc_nostdinc` were made obsolete with PR#24851 and
are no longer invoked.
Remove the macro implementations.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Commit 282f77e732 removed the only place
defining LIBC_INCLUDE_DIR. Remove the corresponding use of
LIBC_INCLUDE_DIR from newlib/CMakeLists.txt as this setting is no longer
being defined anywhere.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
`explorir_m_uart_flush_until_end` terminates immediately if the read
variable is initially equal to `EXPLORIR_M_MAX_RESPONSE_DELAY` and
`uart_poll_in` does not read anything.
Fix this by only checking the read variable if `uart_poll_in` reads a char.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Commit 87f68b4dfe ("arm64: linker: move data section between rodata
and bss") moved .data up a little too far. Keep app_smem in front of it
otherwise user memory partitions end up in general .data with no user
permissions.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Ensure that leading zeros are present in the milliseconds field,
otherwise a milliseconds count of 35 will appear as x.35, i.e. 350
milliseconds. With this fix, it will appear as x.035.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This patch adds bindesc support for the build version values for the
kernel and application - BUILD_VERSION and APP_BUILD_VERSION.
The kernel's BUILD_VERSION can be overridden at build time.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit updates the board documentation to match the I2C1 default
peripheral mapping in rpi_pico-pinctrl.dtsi.
Signed-off-by: Thomas Keller <t.tschaler@gmail.com>
The initialization of the UARTE is attempting to handle potential
improper handover from the bootloader. This handling is additional
complexity which should be fixed in the bootloader or whatever
component is failing to deinit the UART properly.
This commit removes the handling of improper handover from the
bootloader, while additionally clearing the ERROR flag when suspending
the UARTE component.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add default memory partitioning for the nRF53 and nRF91 series devices.
As these partitions refer to TF-M and the TF-M layouts cannot be
modified, use the partitioning scheme from TF-M.
Signed-off-by: Jordan Yates <jordan@embeint.com>
mbox_error_cases tests must be run with the nordic-flpr snippet
to prevent bus fault error while accessing VPR registers.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add Kconfig option to specify Xen interface version to use. This will
make it easier to switch between different versions of Xen.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
Add a line of whitespace between `/* clang-format off */` comments and
the first line of doxygen comment blocks. Some intellisense parsers
will combine all sequential comment blocks when providing code context.
This results in the control comment appearing in the help text for
`ZBUS_CHAN_DEFINE`, for example.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Remove `const` qualifiers on fields in structures that are only created
or instantiated as `const`.
This if primarily for consistency, in the same way that `struct device`
fields and `device->config` struct fields are not additionally marked as
`const`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Initialise the semaphores in the init function so that a copy of the
data structure does not need to exist in `.data`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
There is asignment from size_t variable to uint8_t variable in
nvs_al_size function that can trigger static analysis error.
The problem is fixed by changing the variable to size_t type
instead of uint8_t.
Signed-off-by: Andrej Trnkóci <andrej.trnkoci@nxp.com>
The table of contents already has a caption so the "Sections"
heading is effectively redundant.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The descriptions of the homepage grid items were too long and often
repetitive (e.g. there's no need to repeat "Zephyr" in almost every
descriptions). This commit shortens them to aim at having them fit on
two lines, three at most.
Also updated the look&feel slightly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The IEEE 801.15.4 monitor can be started by a parameter to cmake. This
change removes a TODO to kill the monitor after qemu ends.
The change also re-assigns Ctrl-C to Ctrl-D to ensure that QEMU is not
inadvertently sending SIGINT to the surrounding ninja session (which
would leave the monitor sub-process alive).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Adds support for settings/getting RTC time and using alarm/update feature.
The alarm option needs all fields to be set due to a hardware limitation.
RTC shares the same interrupt with the watchdog. Thus shared
interrupts must be enabled when WDT and RTC both need to trigger the ISR.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
A bug was introduced when fb17d0e365 introduced host presence detection.
Panic_mode flag was added which indicates that RTT should work in
synchronous, blocking mode but it was not set when backend was switched
to panic mode.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Commit bb74b4f028 deprecated a few
CBPRINTF_PACKAGE_COPY_* macros. This drops them and calls out the
change in the release notes.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Do not change the default value of `NORDIC_QSPI_NOR`. It resulted in
undefined references to the DT node `/soc/qspi@40029000/mx25r6435f@0`
when enabling the flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Prevent `warning: orphan section `.note.GNU-stack'` when building using
`west build -b xt-sim samples/hello_world`
Signed-off-by: William Tambe <williamt@cadence.com>
Replace several bools in bt_aics_client with an atomic value.
Update how these values are modified so that we can better
prevent race conditions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ringbuffer availability check is subject to race with regards to
update of BF (Buffer Full) and BNE (Buffer Not Empty) bits in DGCS
register, and status of RP (Read Position) and WP (Write Position).
Following sequence is observed without this patch when
calling dma_get_status() on multiple Intel ADSP platforms:
iter 154 pending 1536 RP 768 WP 768, BNE 1, BF 1
-> dma_reload for 384
iter 155 pending 1536 RP 1152 WP 1152, BNE 1, BF 1
-> dma_reload for 384
iter 156 pending 0 RP 0 WP 0, BNE 1, BF 0
Value of pending is not expected to go from 1536 to zero if only 384
bytes have been consumed via dma_reload() since last call to
dma_get_status().
Change the logic to read DGCS register later, after the WP and RP have
been already read, and only check the BNE bit if Read and Write
Positions are equal.
Link: https://github.com/thesofproject/sof/issues/9418
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Remove myself from the collaborator as there's a maintainer now.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
While it's by definition not possible to check that the "source" for a
redirect entry is a valid path, the "destination" could be checked to be
pointing to an existing resource. This will also help catch potential
errors in the "source" as well since it's common to mess up the paths
for both.
Fixes#77797
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixed entries pointing to invalid destinations either due to resource
having been removed or moved once more, or entries being plain broken
from day 1.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added note about enabled support for the flashing of
.elf files for jlink, pyocd and linkserver runners.
By commits:
- e767ac0703
- c1fe3150e9
- 3f5fc42fba
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Adds missing checks for get_capabilities method not being NULL.
Fixes crash with netusb and possibly other drivers.
Signed-off-by: Maciej Panek <panekmaciej@outlook.com>
When build with the psa_crypto_driver, it will try to include common.h
of mbedtls, but actually include the common.h from hostap, and causes
build error of undefined symbol. Now link the library of hostap to use
the header file in /utils path, to fix the build error.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
When build with the psa_crypto_driver, it will try to include common.h
of mbedtls, but actually include the common.h from hostap, and causes
build error of undefined symbol. Use zephyr_interface_library_named
to define hostap, and other modules needs to link the library of hostap
when wants to use the header file in /utils path, such as the common.h.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
In corner case, the pending ISR will be triggered immediately
after enable the IRQ, this PR will setting CPU affinity first
to avoid routing the unexpected IRQ to other CPUs.
Signed-off-by: chao an <anchao@lixiang.com>
Update the HW models module to:
4b0b020e25dbf1a11ccccf7b7741d6ca991ba9e4
Including the following:
* 4b0b020 54L CLOCK: Generate XOSTARTED event
* 79287fb hal: RADIO: support also triggering TASK_SOFTRESET from HAL
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The nrf54l15dk is now avaliable in the tree.
Let's compare the simulated board to this one instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These peripherals are now included. Let's mention them
and remove the warning about them being missing.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This target does not yet support the PSA random generator.
Lets explicitly set it to disabled, to even if the
SOC definition sets it to "okay" it is not built in
by default.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove 3 delete-node directives which do not apply to this
SOC.
They made it in originally thru a copy paste mistake
from the nrf5340bsim dts file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Xtensa toolchains also contain a profile for sample_controller.
So if compiling for it, skip the Xtensa HAL module in Zephyr
tree so the toolchain can use the one included in the toolchain.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Select PINCTRL subsystem by drivers which require it.
Prevent the need from enabling this symbol at board or soc level.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
WIFI_NM_WPA_SUPPLICANT_CRYPTO_MBEDTLS_PSA should not be by default
selected when WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT is selcted. Enable
PSA APIs if desired separately.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Set WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT as the default crypto
configuration. The crypto ALT implementation contains the necessary
crypto operations and also allows the user to choose PSA or non PSA
crypto operation.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
In the IT82xx2 chip, the ready bit is automatically cleared by
hardware. When setting other bits, there is a chance that the ready bit
hasn't been cleared yet, leading to unexpected USB transactions. This
change ensures that the ready bit is always set to '0' when setting the
endpoint control value.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Save power when the bus is suspended by entering hibernation if
hibernation support is enabled and controller supports hibernation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add Power and clock gating control register to register map and
appropriate bit macros. Add missing GHWCFG4, GLPMCFG and GPWRDN bits.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add barrier between triggering Capture task and reading CC as otherwise
it is possible that CC read will occur before task is triggered when
bus is busy.
Add barrier between reading previous CC value and writing the new one.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This reverts commit 331442f059.
Change was introduced because it was failing on slow core
(nrf54h20/cpuppr) however it turned out that there was a bug in the
driver and now test passes without this tweak which make the test
last twice longer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Having .data after .bss creates a big empty gap in zephyr.bin to provide
proper offset for the data section. Reversing them allows for dropping
.bss from zephyr.bin's output as it is typically done, saving precious
flash memory space.
For demonstration purpose, let's consider those changes:
|--- a/samples/hello_world/src/main.c
|+++ b/samples/hello_world/src/main.c
|@@ -6,9 +6,12 @@
|
| #include <stdio.h>
|
|+int dummybuf[1024 * 1024];
|+
| int main(void)
| {
| printf("Hello World! %s\n", CONFIG_BOARD_TARGET);
|+ dummybuf[0] = 42;
|
| return 0;
| }
Before this commit:
$ ls -l build/zephyr/zephyr.bin
-rwxr-xr-x 1 nico nico 4561908 Aug 2 15:13 build/zephyr/zephyr.bin*
After this commit:
$ ls -l build/zephyr/zephyr.bin
-rwxr-xr-x 1 nico nico 37028 Aug 2 15:17 build/zephyr/zephyr.bin*
While at it, remove some more repetitive comments with no value.
Also defaults CONFIG_LINKER_LAST_SECTION_ID to n as it otherwise screws
everything up for the same reason as above.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
add driver for Monolithic Power Systems MPM54304 with basic
functionality to enable/disable the buck regulators
Signed-off-by: Elias Speinle <e.speinle@vogl-electronic.com>
odroid_go is using ESP32 chip revision (1) that is unsupported,
so we need to enable 'CONFIG_ESP32_USE_UNSUPPORTED_REVISION'
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This option switches support for multiple volumes on the physical drive. By
default (0), each logical drive number is bound to the same physical drive
number and only a first FAT volume found on the physical drive will be
mounted.
When this function is enabled (1), each logical drive number can be bound
to arbitrary physical drive and partition listed in the VolToPart[].
The VolToPart[] is expected to be provided by Zephyr application.
For example, 2 FAT partition on SD disk ("SD" index 3) in terms of Zephyr:
{3, 1} - mount point "/0:"
{3, 2} - mount point "/1:"
The mount points have to be numbered in this case.
Code example of mounting a second FATFS partition places on SD-card:
static FATFS fat_fs;
static struct fs_mount_t mp = {
.type = FS_FATFS,
.fs_data = &fat_fs,
.mnt_point = "/1:
};
/*
* 2 FAT partition on SD disk
* PARTITION.pd - Physical drive number. "SD" has index 3 in terms of
* Zephyr (see FF_VOLUME_STRS)
* PARTITION.pt - Partition (0:Auto detect, 1-4:Forced partition). So 1 for
* the first FATFS partition and 2 - for second.
*/
PARTITION VolToPart[FF_VOLUMES] = {
[0] = {3, 1}, /* "0:" ==> 1st partition on the pd#0 */
[1] = {3, 2}, /* "1:" ==> 2nd partition on the pd#0 */
[2] = {0, -1}, /* "2:" ==> 3rd partition on the pd#0 */
[3] = {0, -1},
[4] = {0, -1},
[5] = {0, -1},
[6] = {0, -1},
[7] = {0, -1},
};
fs_mount(&mp);
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
The Kconfig option enables support for 64-bit LBA, which also allows
to enable GUID Partition Table (GPT) support.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
For almost all STM32 GPIO controllers, the number of supported GPIO
pins managed by a single controller is 16 (with some exceptions for
fewer). However, the default for ngpios in the device tree bindings
for gpio-controllers is 32; leading to inaccuracies in handling GPIO
for these controllers, such as presenting too many GPIOs in the GPIO
shell. This patch redefines the default for ngpios for "st,stm32-gpio"
compatible devices to 16 and adds the correct ngpios for the few
exceptions Zephyr current supports.
Signed-off-by: Michael R Rosen <mrrosen@alumni.cmu.edu>
When calling bt_cap_initiator_unicast_audio_start on a set of streams
that are all in the streaming state we return early with -EALREADY.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast_start procedure should take a stream in any state
and put it in the streaming state. Adds tests with streams
in various states.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This allows the procedure to work for streams in the non-idle state,
e.g. we can start one of more streams in the codec configured
or even enabling state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This allows applications to modify the values set by an
existing unicast group, assuming that none of the streams in
the CIG has been connected.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
So far 10 kHz tick rate was used but it has 2 drawbacks:
- kernel timer precision is limited to 100 us which is worse compared
to 30 us on platforms which use RTC (which had 32768 Hz tick rate)
- GRTC has 1 MHz frequency so tick rate requires dividing by 100 during
timeout calculation. When 31250 Hz is used (which is 1000000 / 32)
then dividing can be done with bit shifting and it is faster (> 2 times
faster on Cortex-M33 and >8 times faster on VPR - RISCV).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Behaviour is unchanged for max_skip == 0
For max_skip > 0, use a slightly different calculation to ensure
we can pass LL/DDI/ADV/BV-28-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Updated condition to enable NET_STATISTICS. Changed
CONFIG_NET_STATISTICS_ETHERNET to CONFIG_NET_STATISTICS_WIFI
in airoc_wifi.c
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Issue:
Kconfig WIFI_AIROC should not depend on infineon SOC family selection
for the connection. See issue#77012 for details.
Fix:
- update modules/hal_infineon/Kconfig to be able enable
USE_INFINEON_ABSTRACTION_RTOS for non Infineon SOC family.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Ignores "command disallowed" if the host privacy implementation tries
to change the device's random address while scanning or initiating.
This is not allowed by spec. It's caused by scan_update() in scan.c.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
CONFIG_SOC_COMPATIBLE_* is not configurable but CONFIG_BT_LLL_VENDOR_* is.
This allows an alternate LLL to be built on nordic and OpenISA chips.
Signed-off-by: Félix Piédallu <felix@piedallu.me>
With ACE2/3 the HDA DMA includes registers to read the Linear Link
Position.
Previous platforms (CAVS, ACE1) was able to report the LLP for GPDMA. Since
ACE2 all links are handled with HD-DMA, hence the new register has been
added for the firmware to report the LLP to the host.
Set the total_copied to 0 for older ACE1/CAVS platforms and in case of
host DMA on ACE2/3 since the informatiojn is not available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: #77705
Fix wrong macro.
Tested with all the boards mentioned in that issue, build now works.
Signed-off-by: Sergio R. Caprile <scaprile@gmail.com>
The logs for retransmission attempts for sending segments and ack
retransmission attempts for receiving segments were the same, making it
difficult to distinguish between them. This can be solved by adding
information to the log of ack retransmission.
Signed-off-by: Junho Lee <tot0roprog@gmail.com>
Add the possibility to disable fault handling in spurious
interrupt handler on RISCs and replacce it with an infinite loop.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
[Reproduce issue]
1. Connect In-STA to Ex-AP
wifi connect WiFi_STA_HE_1.1.8 1234567890 3 2 2
2. Start APUT with ACS using below commands
wifi ap enable nxp-AP 161 1234567890 3
3. Connect Ex-STA to APUT and verify association using ping traffic
4. Now start two TCP server
zperf tcp download -I ml 5001 192.168.0.252
zperf tcp download -I up 6002 192.168.10.1
Observed behavior:
=============
Second TCP server fails to start
[Analysis]
1. After starting uap and a tcp server,
there is only one allocatable fd resource
left in the fdtable.
2. When two TCP clients try to establish a connection
with the server at the same time, the second client
cannot be assigned an fd, resulting in a failure.
[Fix]
Increase the maximum number of open file descriptors.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
The change of alignment check in #76045 could be wrong and
isn't unnecessary to fix the stack traces output, undo it for
now.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Using strncasecmp to match HTTP headers can give unexpected results when
the strings to be compared match up until the end of one string, but the
other string contains additional characters. This can result in falsely
matching a HTTP header value, for example:
strncasecmp("Upgrade-Something", "Upgrade", sizeof("Upgrade") - 1) --> 0
In this case we know that both strings are NULL terminated since one is
a string literal and we have just length-checked and explicitly NULL
terminated the other. So we can just use strcasecmp without a max
length.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
The lwm2m_check_buf_sizes() function was not checking resources of
type LWM2M_RES_TYPE_U16, which could lead to potential overflows
when writing larger data types into U16 resources. Add a case for
LWM2M_RES_TYPE_U16 to properly validate the buffer size.
Fixes#77016
Signed-off-by: Hyunsu Yoon <piedroconti@naver.com>
If IPv6 is enabled, the fixed size net_buf data needs to be
large enough so that the full IPv6 header with extensions
can fit to one net_buf packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When an LLEXT object uses symbols of another such object, it depends
on it. Such dependencies have to be tracked to prevent their
accidental unloading. Ideally we should be able to track arbitrary
numbers of such dependencies, but this is a bit difficult. In this
first implementation we use a fixed-size array, currently consisting
of 8 entries.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When deciding which sections to group together, only the low 3
section attribute bits are relevant, ignore the rest.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Using the immediate logging option from LLEXT modules requires
one more symbol export.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
LLEXT objects can also export symbols for use by other such objects.
That means, that when linking an LLEXT object we have to look for
unresolved symbols in previously loaded objects too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently LLEXT has two ways to export symbols:
EXPORT_SYMBOL() to exort symbols from the main firmware to extensions
LL_EXTENSION_SYMBOL() to export symbols from extensions
but it is possible to write code, that needs to export symbols
regardless of whether it is built into the main image or an
extension. And in fact there's no real need in two distinct macros -
we can use one for both cases and recognise at build time which
direction exporting is happening. This patch extends EXPORT_SYMBOL()
to also work from extensions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add a mode to build the driver without FW blobs, this is mainly for
twister to run and catch any build issues without depending on any FW
blobs.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The `bt_id_set_adv_own_addr` function itself tries to allocate a buffer
for the command and it failes due to lack of buffers, it returns error.
However, the `le_ext_adv_param_set` function doesn't handle the error
properly and keeps its own allocated buffer.
This commit releases the allocated buffer.
Partially fixes mesh in #77241.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add nrf5x binding header, as NRF5X_REG_MODE_DCDC is used in a macro
comparison. Missing header prevented evaluation to become true and so
enable DC/DC module.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Implemented new DIS characteristics:
- UDI for medical devices
- IEEE 11073-20601 Regulatory Certification Data List
- System ID
Also fixed buffer overflow bug when assigning too long DIS string literals
Signed-off-by: Simen Eilevstjønn <simen.eilevstjonn@laerdal.com>
Enable CYW20829_BT_FW_TX10DBM_POWER by default to get
best user experience experience out of the box.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Update CYW20829 Bluetooth LE fw for PAwR support
Commit#88d2529a3c5aee2e81947553bf6cbacb4671088c
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Problem:
on cyw208xx devices i see sometime `Timed out while synchronizing`
error in samples periodical_adv_rps/periodical_sync_rps.
log:
<err> bt_scan: Could not lookup connection handle from PAST
<err> bt_scan: Unknown handle 0x0000 for periodic advertising report
Timed out while synchronizing
...
After investigation i can confirm, the sync was created successful,
but in application (periodical_sync_rsp) terminated the sync when the
connection is not valid.
periodical_adv_rps doesn't have any mechanism to wait for sync and after
gatt write (subevent, response_slot information) it immediately
performs disconnection.
Solution:
Added sync wait delay before make disconnection, to ensure sync
is established before disconnection.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Added setup of PUBLIC ADDR
NOTE: By default, the CYW208xx controller sets some
hard-coded static address.
To avoid address duplication, let's always override
the default address by using the HCI command
BT_HCI_VND_OP_SET_LOCAL_DEV_ADDR. So
1. when cyw208xx_setup gets BT_ADDR_ANY from the host,
it will overwrite the default address, and the host
will switch to using a random address (set in the hci_init
function).
2. If user set the static address (by using bt_id_create)
before bt_enable, cyw208xx_setup will set user defined
static address.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Remove print "Failed to receive response...", if receive
BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED.
Problem: with cyw920829m2evk_02 device periodic_adv_rsp returns
multiple messages “Failed to receive response….” in the terminal
log.
This happens because controller generates
HCI LE Periodic Advertising Response Report event for each
RspSlot. Because no RSP_DATA is observed in the OTA, which
is no scan device to transmit RSP_DATA, no RSP_DATA can be
received. Therefore, Data Status is 0xFF in all of these events,
which finally cause the messages “Failed to receive response….”
Data_Status = 0xFF is expected because nothing is received
for that Rsp Slot.
Per spec, it’s not mandatory to generate these events,
So another vendors (e.g. Nordic) might skip the HCI event
generation if Data_Status = 0xFF.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Select PAwR if enabled following features:
- BT_PER_ADV_RSP
- BT_PER_ADV_SYNC_RSP
Remove dependency BT_AIROC_CUSTOM for AIROC_CUSTOM_FIRMWARE_HCD_BLOB
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
The 'soft-off' state must be used when explicitly request by calling
`pm_state_force`. Set this state as disabled in dts ensures that the
pm policy manager will not use this state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Stores a magic value togetter with the counter value, and resets the
counter in case that magic does not match.
A small magic value is not ideal, but should be good enough for the
sample and avoids pulling in a additional dependency e.g. on crc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit moves the backup sram definition to the
series base dtsi file, the size is overwritten for socs
which have a bigger bkpsram.
The backup SRAM is available on all stm32h5 mcus.
stm32h503/523/533 have 2k
stm32h562/563/573 have 4k
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Also fixed a couple invalid or missing table of contents to have
proper document hierarchy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
On stm32h735g_disco, `arduino_gpio` is declared while the connector is not
actually described.
On stm32h750b_dk, connector description was simply not included.
All these are blocking tests trying to make profit of arduino gpio
connectors.
Fix these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rename `BT_CONN_AUTO_FEATURE_EXCH` to `BT_CONN_LE_FEATURES_EXCHANGED`,
and add some comments for readability.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When using the it8xxx2bx chip, because the SRAM size is 60k and
not a power of 2, using (CONFIG_SRAM_SIZE - 1) results in an
incorrect value for the h2ram base address mask.
Therefore, the mask is declared as GEMASK(19, 0) here.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT should be set by default
for all Intel ACE platforms
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Tmr and dtmr drivers were missing a flag which tells the
counter_is_conting_up function that the counter is counting up. So I've
added the flag
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
If CONFIG_LOG_BACKEND_SHOW_COLOR is disabled, error and warning
lines are still being outputted with color, which is contrary to
what the Kconfig says. So change the color settings for error
and warning lines to no color if this Kconfig is disabled.
The log_output test is also amended to account for this.
Though the test is not skipped as no color is still some colors
(... well... maybe).
Fixes#77150
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Update the wrong value of xtal frequency on EK-RA6M1
- Update documentation of EK-RA6M2 regarding to clock description
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Due to it is a normal firmware downloading sequence,
it should be a debug log instead of error log.
Change LOG_ERR to LOG_DBG for this case.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The way ESP32 XIP works (with MMU and cache) does no fit the way Zephyr XIP
is implemented, causing issues related to included Zephyr linker files.
Flash code still resides in flash for execution, but MMU/Cache handles it
in such way that XIP might not (or should not) be used with current Zephyr
approach. To address this problem, XIP configuration option is being
removed from Espressif targets.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Several BSIM tests did not enable -RealEncryption=1.
Since everything in LE Audio effectively requires encryption,
we should enable it, as we have seen a few tests passing before
that shouldn't, because they didn't set -RealEncryption=1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Enable central HR peripheral HR samples for nrf54l15bsim.
RealEncryption is BabbleSIM is not enabled as nRF54L port
in Zephyr Controller is not yet supported and the test is
also not using security (SMP pairing).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use SW_SWITCH_SINGLE_TIMER for nRF54Lx so that fast ramp
can be used, and hence support assymmetric PHYs in ACL
connections.
nRF54Lx radio domain does not have second timer instance
to efficiently implement software switch unless a second
time is used from a different power domain needed use of
PPIB for the double buffered switch timer compares.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use NRF_GRTC, Global real-time counter, instead of NRF_RTC.
NRF_GRTC is present in a different power domain in the SoC.
Also, NRF_GRTC provide microsecond resolution timing units,
in the future use of NRF_TIMER for packet timer can also be
replaced.
Use of NRF_RTC would keep Radio power domain ON in addition
to already ON NRF_GRTC's power domain, hence switch to using
NRF_GRTC on nRF54Lx SoC to have lower power consumptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nRF54Lx have updated Data Whitening register settings, add
implementation to correctly set them up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor sw_switch hal interface use and document why some
PPI/DPPI channel group related subscriptions are not
disabled explicitly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix software tIFS switching using single timer from
triggering spurious TXEN/RXEN if the first remainder is
shorter than the tIFS delay calculated in the sw_switch()
function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Extend the adc_mcux_adc12 adc api to set the ref_internal to
a value of vref-mv property.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Add the vref reference voltage in the DTS, so that the adc driver
can retrieve the value for conversion.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Enable support for channels >= 16 on devices S32K146 and S32K148.
Channels >= 16 are encoded as 100000b..101111b in SC1[ADCH] field.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Update Ambiq adc driver to add apollo4
fixed typ of BUMBER to NUMBER
Move buffer size prio to configuring slots
and enabling the ADC
removed #if defined(CONFIG_PM_DEVICE_RUNTIME)
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
Get data for various roots from modules and do not hardcode location
when retrieving list of boards in testplan.
Fixes#71761
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the yaml files needed for the dts binding of the Bosch bmp180 sensor.
V2 Fixup
--------
yaml fixup for complient checks
merge bmp180-i2c.yaml and bmp180.yaml
Signed-off-by: Chris Ruehl <chris@gtsys.com.hk>
Add driver support for Bosch bmp180 pressure sensor running on i2c bus.
It pushes the driver files to the bmp180 directory under
drivers/sensor/bosch. The driver implement the Sensor API
and support channel DIE_TEMP and PRESSURE.
Driver had been tested with the NRF5340DK.
V2 fixup
---------
Drivers: Bosch bmp180 fixups for PR v2
fix BMP180 in CMakeLists.txt
rename regControl to ctrlreg
simplify the logic in set_attribute
use BMP180_GET_CMD_TEMP_DELAY
Drivers: Bosch bmp180 use system byteorder macros
To aware of ENDIANESS use the macros from byteorders.h
Drivers: Bosch bmp180 comments added to #endif
Add a comment to the #endif /* CONFIG_FOO */
Drivers: Bosch bmp180 , fix twister run error
twister report an error related to using floor() with a float
fix this using floorf() function.
Drivers: Bosch bmp180, rework review v2
fix code style issues
simplify the structure for bus and i2c.
prepare to remove the empty bmp180_i2c.c
Drivers: Bosch bmp180, remove bmp180_i2c.c
bmp180: update CMakeList.txt remove bmp180_i2c.c
bmp180: remove unused variable
fixups for complient checks
replace homebrew bitshift with byteorder.h macro
sys_get_be16 and sys_get_be24
cleanup remove unused spi.h
change struct reg16/24 to uint8_t[]
remove channel AMBIENT_TEMP
bmp180/Kconfig add missing help text
fix indent issue in bmp180_pm_action
merge BMP180_CONFIG_I2C into BMP180_INST
Move DT_DRV_COMPAT out of the header file
drop LOG_DBG() from read calibration data
remove bus_io implementation and header cleanup
move headers and structs out from bmp180.h
fix typo in comment
apply clang format changes, only if not line lenght violation
fix indent code error after joined lines
conversion from Pa to kPh was wrong, fixed it
Remove default=n from Kconfig, it is the default.
Move the conversion ready test into a function (duplicate code)
and apply retry policy
parameter naming with indicate the usage
change BMP180_INST(inst) to clang format
fix int32_t overflow in convension formular
fix wrong devider in convension formula
move BSWAP_s16 BSWAP_u16 from .h to .c
Signed-off-by: Chris Ruehl <chris@gtsys.com.hk>
Now that there is an actual Kconfig symbol generated for blobs presence,
take advantage of that and declare appropriate dependencies to it. Also add
helpful CMake output if the blobs are missing by taking advantage of the
zephyr_blobs_verify() CMake function.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
For any module that defines blobs, add a new Kconfig symbol to indicate
whether the blobs have been fetched or not. Example output for the
hal_silabs module:
# (no blobs present)
$ scripts/zephyr_module.py --kconfig-out=/dev/stdout \
-m ../modules/hal/silabs
menu "hal_silabs (../modules/hal/silabs)"
osource "/Users/johedber/src/zephyr/modules/hal/silabs/zephyr/Kconfig"
config ZEPHYR_HAL_SILABS_MODULE
bool
default y
config ZEPHYR_HAL_SILABS_MODULE_BLOBS
bool
endmenu
$ west blobs fetch hal_silabs
# (blob fetching output)
$ scripts/zephyr_module.py --kconfig-out=/dev/stdout \
-m ../modules/hal/silabs
menu "hal_silabs (../modules/hal/silabs)"
osource "/Users/johedber/src/zephyr/modules/hal/silabs/zephyr/Kconfig"
config ZEPHYR_HAL_SILABS_MODULE
bool
default y
select TAINT_BLOBS
config ZEPHYR_HAL_SILABS_MODULE_BLOBS
bool
default y
endmenu
The generated output for modules which do not define blobs is not affected.
Having this additional symbol for blobs lets us specify Kconfig
dependencies for features which require the blobs to be present.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The size of the rx_buffer used by icmsg.c mbox_callback_process()
is not MISRA compliant, being "dynamically" allocated on the stack.
This commit adds a kconfig to set the size of the read buffer and
asserts that it is large enough to read all received data.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add a babblesim test for testing the behavior when providing
an invalid broadcast code as the broadcast sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When building proxy client without proxy server, it fails to find
the `identity` field in the `struct bt_mesh_subnet_keys` because the
latter only compiles when Proxy server is enabled. It should be
possible to compile Proxy Client without Proxy server.
This commit compiles the field if any of GATT features is enabled.
Fixes#75914
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The BIG info new Framing Mode field was not initialiazed, so
random garbage was being sent to the air in this field.
For the controller this field is still RFU.
The spec specifies RFU fields must be initialiazed to
0. So let's do so to avoid sending invalid data,
and avoid having random data in the air which can cause
random differences in testcases.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Includes an updated libcrypto with new APIs
for CCM packet encryption/decryption.
Also some other components have got very minor updates.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
da5f426e7f3aff192a93e5874146260d4dcd943e
Including the following:
* 6e70c2d hal: hack: Support also AAR, CCM & ECB for 54L
* da5f426 Tests for AAR, CCM & ECB
* 03b8461 54: Added AAR, CCM & ECB models
* 2ebcc88 Add EVDMA model
* 71913e3 54: Enable AAR hal build
* 0f3a04b BLECrypt_if: Add new interfacing for latest libCrypto
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The unicast server now prints when a steam enters the streaming
state.
This commit also slightly increases the metadata size to increase
interoperability with other devices such as Android.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The previously added overlay can now be used. Wire up SPI tests for the
Nucleo h745zi-q board.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
The board is capable to serve SPI on the Arduino extention header.
Configure and enable SPI to work on the extention.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
The nucleo_h7X3zi overlays use memory attributes and therfore the
dedicated include file. This is unnessesary, since the memory attribute
include is already included from the underlaying CPU base file
"stm32h7.dtsi". Remove the unnessesary includes.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Test that SQE's created with `rtio_sqe_prep_callback_no_cqe` run, but
don't create a completion queue event.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add a helper function that constructs a callback operation that doesn't
generate a completion queue event.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add Doxygen tooltips in the main documentation.
The tooltips are triggered when hovering over C symbols in the
documentation and display a preview of the Doxygen documentation for the
symbol.
Some shadow DOM magic is needed to style the tooltips correctly, without
affecting the rest of the page.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Every High-Speed capable device must be able to enumerate at Full-Speed.
The functionality at different speeds can be different. Sometimes it is
possible to support exactly the same functionality on both High-Speed
and Full-Speed, but sometimes it is not. The problem is particurarly
relevant for UAC2 because it utilizes isochronous endpoints which means
that the available bandwidth is drastically different between High-Speed
and Full-Speed.
Full-Speed isochronous endpoint can support up to 1023 bytes per frame.
Typical 48 kHz 16-bit stereo stream consumes 48 * 2 * 2 = 192 bytes per
frame. Zephyr UAC2 instances with such streams are fine to work both at
Full-Speed and High-Speed.
An example stream that is too much for Full-Speed is the sometimes used
192 kHz 24-bit stereo (whether or not it is useful is out-of-scope here,
because it should be up to application developer) which would require
192 * 3 * 2 = 1152 bytes per frame.
Because the bandwidth required for audio stream depends on three
different parameters (sample rate, bit resolution and number of
channels), the UAC2 implementation should not automatically limit
available parameters to fit bandwidth requirements.
Adding explicit full-speed and high-speed boolean options to zephyr,uac2
compatible seems to be not only the easiest solution to the problem, but
also the most flexible one. Depending on the use case, the application
developer can then decide for example:
* to not support High-Speed at all - by having one zephyr,uac2 instance
with full-speed property
* to not support Full-Speed at all - by having one zephyr,uac2 instance
with high-speed property
* to support limited number of channels at Full-Speed and all channels
at High-Speed - by having one zephyr,uac2 instance with full-speed
property and separate instance with high-speed property
* to have exactly the same functionality at both speeds - by having one
zephyr,uac2 instance with both full-speed and high-speed properties
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a composite fuel-gauge device to the Thingy53 to enable converting
the raw voltage to a battery percentage.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Support additional properties from the linux `battery.yaml`.
The `ocv-capacity-table-0` definition differs from the Linux version as
we do not have a good way to generate variable length arrays in our
config structs, or a good way to separate out the percentage vs voltage
in the mapping.
We reduce the flexibility by enforcing a step size of 10%, which removes
the need for the percentage to be in the array and solves the variable
length problem.
To simplify the effort of defining these voltage curves, default curves
for a variety of chemistries have been added, extracted from datasheet
graphs of discharge curves from reputable manufacturers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
- HRS control point was added to server but no write callback is
defined, this causes issues if control point characterstic is
written by the client
Signed-off-by: Anuj Pathak <anuj@croxel.com>
Modify the function "i2s_stm32_set_clock" to handle the case where pclk_len
it is not greater then 1 and to ensure that the freq_in
variable is correctly set in both cases.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
RT1011 expects it's flash configuration block at a different offset than
the rest of the RT10xx series. Add default to fix the platform not
booting.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
I2S driver was merged after interrupt .dtsi was changed,
causing CI to fail. This updates it accordingly.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Extensions could have used logging, when log processing is
deferred, the logging thread can run after the extension has
been unloaded and thereby access invalid memory addresses.
Make sure to flush all logs before unloading extensions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Zephyr already has various FlexIO drivers but imxrt11xx didn't enable
the base flexio peripheral.
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
Due to issues with running the watchdog test in a fully
automated manner on the IT8XXX2_EVB, it was previously removed.
However, a fix has now been merged, and it should be operational
on this board once again.
Signed-off-by: Patryk Kuniecki <patryk.kuniecki@intel.com>
Flash partition was defining a scratch area which was implying the use
of mcuboot BOOT_SWAP_USING_SCRATCH f/w update method.
By removing this partition, mcuboot will automatically use
BOOT_PREFER_SWAP_MOVE method which should be prefered as it levels
flash wear. Incidentally increase slot1 by one sector (as this is
preferred for the swap method).
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
1) After the wifi driver successfully connects to the AP,
the dormant state should be set to OFF.
Once a deauth/disassoc frame is received or link lost occurs,
the dormant state should be set to ON.
2) Enable CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO and CONFIG_NET_CONTEXT_PRIORITY
to push high priority packets directly to network driver.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
The STM32H5x adc has a special option register that
needs to be set when using channel 0 on adc1.
fixes: #77618
Signed-off-by: Lars Jeppesen <lje@foss.dk>
The gen_kobject_list.py script expects the __subystem declaration to end
with _driver_api. Adjust the stepper api and existing driver implementation
accordingly.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Update the EDTT module to:
b9ca3c7030518f07b7937dacf970d37a47865a76
Including the following:
* b9ca3c7 Fix for for python >= 3.11
* fe9b1d1 Corrected ISO interval for LL/CIS/PER/BV-05-C
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some hardware configuration require rely on the ALERT/RDY
pin to know when and ADC conversion is completed.
The polling thread is left as fallback, when the pin
is not defined.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
Add a new macro, DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY
name, evaluates to 1 if any enabled instance of `compat` has the
property or to zero if it hasn't.
This macro can be useful in drivers for a family of devices.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add Flexcomm signal sharing configuration for the mimxrt595s/cm33 and
mimxrt685s/cm33 SoCs. Properly instantiate the I3C peripheral for
interfacing with the WM8904's control port. Modify pinctrl DTs of
mimxrt595_evk/mimxrt595s/cm33 and mimxrt685_evk/mimxrt685s/cm33.
Instantiate the WM8904 codec for said boards.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add clock config for Flexcomm peripherals functioning as I2S interfaces.
Add MCLK clock config for the WM8904 codec located on the mimxrt595_evk
and mimxrt685_evk boards.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add sample rates. Add dai_route_t enum to allow codec configuration for
duplex operation. Allow for audio inputs to be controlled. Add functions
for signal routing.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Enable DMIC clock in soc.c - attach to chip's audio PLL. Add pinmux
definitions for the DMIC peripheral. Add nodes to SoC's device tree for
the DMIC peripheral and its audio channels. Configure the DMIC
peripheral in board's device tree to enable audio capture.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
timeutil internally uses 1900 as base year for calculation,
that is hidden from caller context. Thus declared a macro in
the public header file, and uses that macro will let caller adjust the
calulations accordingly.
Signed-off-by: Anuj Pathak <anuj@croxel.com>
find the headset which a2dp related record len is SEQ32,
fix sdp_client_get_total too because it doesn't handle
SEQ32 too.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
As the .bin & .hex build output is optional
and it can be disabled by CONFIG_BUILD_OUTPUT_BIN/HEX,
add support for the mandatory .elf build output
to the linkserver runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Following addition of a `name` to hal_stm32 module, the command to fetch
blobs that are required to build BLE applications on STM32WBA socs is now
changed from `west blob fetch stm32` to `west blob fetch hal_stm32`.
Update documentation and warn users in migration guide.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added volume offset for CAP commander
Added gain settings for CAP commander
Added play, pause and seeking for MCS
Added program_info and metadata update for PBP
Added long read and notify for all TBS characteristics
Added TMAP CG
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For mapping operations in sys_mm_drv_simple_map_region() and
sys_mm_drv_simple_map_array(), when there was an error with
mapping any pages, it would simple return an error, leaving
already mapped pages still mapped. This modifies the behavior
where any failure during the whole mapping operation will
unmap the already mapped pages.
This also modifies the remapping and moving functions to
reset mappings when error is encountered.
Fixes#73121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If a diff only has added or removed lines we need to match both '-' and '+'
characters in the hunk context.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Caught by CI in another PR, should be 'Unsupported' instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added entries in the release note & migration guide about the
changes to the `kernel thread` shell command.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added commands to access the APIs in the kernel/cpu_mask.c
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Use `shell_strtoull()` to parse the thread ID argument for
error checking.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`stacks` `threads` & `unwind` are commands related to kernel
thread, group them one level inside a main `thread` command,
and rename `threads` to `list`:
- `kernel threads` -> `kernel thread list`
- `kernel stacks` -> `kernel thread stacks`
- `kernel unwind` -> `kernel thread unwind`
Additionally, rename and mark the `thread_valid()` function
as `__maybe_unused` as it might be unused for architectures
without stackwalk implementation, and use the locked version
of the thread iterator (`k_thread_foreach()`)
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The "channels-num" should not be used here, other system's parts are using
"channel-count" instead for the same purpose.
Also property's description has been сorrected.
Signed-off-by: Andrey VOLKOV <andrey.volkov@munic.io>
These boards support Bluetooth, so it should be listed under "supported".
There's also no (known) good reason to explicitly skip "net" tags, so
remove that from the ignore_tags list as well. We don't particularly know
or care about relevant net tests for these boards, so "net" is left out for
now from the "supported" list.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
These boards don't currently have the necessary binary blobs available
for Bluetooth, so keep their Bluetooth HCI DT node disabled.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add overrun count in statistics. It will represent
the number of packets dropped either at received and
sent due to lack of buffer memory.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Remove water mark configuration and handle its interrupt
instead, since it is only present in ESP32S3.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
since h750 and h743 have the same irq wkup priority,
we can add wkup interrupt in h743.dsti and simply
include the file in h750.dtsi.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Increase wifi connect input parameters max count to 13. Previous count
7 is not enough if other security type is supported.
When enabling softAP, the parameter cnx_params in cmd_wifi_ap_enable()
is with static key word. Then the parameter will always save
configurations of last time. Remove static keyword to eliminate effects
of configs from last tim and do memset before setting up softAP.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Link mode shows unknown when legacy (A or bg only) device connects to
APUT. Set the link mode to WIFI_2 when the host freq over 4000 and set
link mode to WIFI_3 when the host freq over 2000.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Increase max count of CONFIG_WIFI_SHELL_MAX_AP_STA from 5 to 8. The
SoftAP of NXP wifi chip can support up to 8 stations.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
When omitting the clk_src definition in a child node of a pclkblock,
it uses the source of the parent node.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Allows MSTP register addresses to be changed in the device tree
to support different configuration SoCs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add support for HSE as the RTC clock source.
The initial implementation has the following limitations:
- Only whole MHz HSE frequency is supported, e.g. 24.5 MHz will generate a
compile error.
- Frequencies equal or above 64 MHz are not supported and will generate a
compile error.
The implementation has been tested on nucleo_h563zi with:
- 8 MHz (via hse-bypass)
- 25 MHz (via external crystal)
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
pwm: pwm_api: update testcase.yaml and add new overlay configuration
to support flexio pwm driver.
spi: spi_loopback: update testcase.yaml and add new overlay
configuration to support flexio spi driver.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
After testing the flexio spi_loopback on the ke1xz platform,
it is found that the master transfer and receive are not
synchronized. So add loop code to wait for the master transfer
to complete for frdm_ke17z and frdm_ke17z512 platforms.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This adds the bits to test the displaying the usage of
privileged stacks for user threads. Note that this only
adds the printk part as this is to test the code path to
fetch usage data rather than the display part.
Also add qemu_xtensa/dc233c/mmu to platform allow list so
the privileged stack code can be tested on that platform.
This replaces mps2/an385 with qemu_x86 as an integration
platform due to the privileged stack test. Since ARM does
not currently support getting privileged stack info, test
would result in twister error due to kconfig warnings.
The board cannot be excluded since it's an integration
platform. So for now, use qemu_x86 as an integration for
32-bit testing. Once ARM has proper support, we can go
back to having mps2/an385 as an integration platform.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This disables QEMU icount for all the simulated platforms
in the allowed list. With icount enabled, the printout from
the thread analyzer would be continuous and non-stop instead
of the default once every 60 seconds. Besides, the console
harness only needs one, and these is no need to waste CPU
cycles and memory for processing the extra ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to initialize the privileged stack when
a thread is transitioning to user mode. This prevents
information leaking if the stack is reused, and also aids
in calculating stack space usage during system calls.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to initialize the privileged stack for
each thread during thread initialization. This prevents
information leaking if the thread stack is reused, and
also aids in calculating stack space usage during system
calls.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to initialize the privileged stack for
each thread during thread initialization. This prevents
information leaking if the thread stack is reused, and
also aids in calculating stack space usage during system
calls.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Only set the privileged stack pointer for thread stacks, but
nullify the pointer for kernel-only stacks, as these stacks
do not have the reserved space. The psp pointer may point to
arbitrary memory in this case if stack is not big enough.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to display privileged stack usage for
architectures that support obtaining this information.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The per-thread output after the first stack usage line is not
aligned which makes it harder to decipher the content.
So align them for easier reading.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new arch_thread_priv_stack_space_get() interface for
each architecture to report privileged stack space usage. Each
architecture will need to implement this function as each arch
has their own way of defining privileged stacks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
IPPROTO_IPV6 option was set on TCP socket (besides doing it already in
tcp.c) instead of UDP. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use correct output for the changed-files action so that bsim tests are
also run on deleted files, no just added/copied/modified/renamed
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use correct output for the changed-files action so that docs
is built in CI when relevant files are *deleted* too, not just
added/renamed/modified
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds the default MCUboot operating mode when building using sysbuild.
Fix mcuboot sysbuild for frdm_mcxn947.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Currently, if the user wants to allocate heap on external RAM
he needs to enable CONFIG_ESP_SPIRAM and set a threshold defined
with CONFIG_ESP_HEAP_MIN_EXTRAM_THRESHOLD.
This approach requires that we re-implement `k_malloc` and allocate
the memory on the proper region based on the block size.
By using the shared multi heap feature the proccess of allocating
memory from external memory becomes more fluent and simple.
The attribute SMH_REG_ATTR_EXTERNAL was added to reference the
external memory.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Update `shell_backend_uart` to take into account the new line print by
`z_cursor_next_line_move`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When the shell start, it will print two lines. The reason for that
behavior is not documented. Remove that to make the code simpler and
shorter one line at a time.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The fact that the function was returning `true` for empty line was an
unexpected behavior according to the name of the function itself and how
it was used elsewhere.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Follow ARM architecture recommendations:
* Use Data Synchronization Barrier (DSB) instruction before WFI,
to ensure that pending memory transactions complete before
changing state.
* To guarantee pend interrupts are recognized before subsequent
operation, use ISB after CPSIE (__irq_enable)
This prevents sporadicy delayed ISRs due to continous MEC172x
entering/exiting deep sleep.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Instead of using filter (which is expensive in terms of CI as
it needs to run cmake on everything to get the full kconfigs
before filtering can be done), change that to a curated list
of allowed platforms. This avoids the expensive filtering
operation, yet can still run on some emulated platforms to
verify the dictionary output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds support for setting the operating mode of the TMP116/7 sensor to
either shutdown, continuous conversion or one-shot mode.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Before commit baa70d8d36 ("arch/arm64/mmu: fix page table reference
counting part 2") it was possible to perform a partial unmap of a block
mapping. Restore that ability and provide a test case to validate it.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Resend CMD0 before each CMD8 query while initialising the card, as the
first CMD0 is not always sufficient to recover the card.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Since testing.c/h was moved to mesh, all functions and
structs in those files now follow a bt_mesh_test_*
naming scheme to be consistent with the naming in Zephyr.
Due to missing includes in many files, this commit also
added some that were missing in order to build since
the order of includes have changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The file is only ever used by mesh and it is even stated in the
header of the file that it is internal APIs.
The include file has been merged with the host testing.h file
as that was mesh specific as well. Similarly the testing.c
file was also moved
This is part of a process to clean up the file structure of
Bluetooth as it's a bit messy, which is evident from the
MAINTAINERS.yml file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Re-arrange Twister command line options for test plan reporting
to a dedicated group with mutally-exclusive options to reflect
actual implementation and its dry-run execution mode.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Drop support for Google Kukui EC board which was used for
early Zephyr experiments but doesn't really exist anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Re-run issue check when a PR is updated, i.e. when someone adds
'Fixes...` to the PR body.
This is mostly for release branches and has no effect on main branch.
Also, add concurrency check in the workflow.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There appear error on `ZBUS_CHAN_DEFINE` when `CONFIG_CPP`
is enabled. Error: `zephyr/zbus/zbus.h:352:9: error: designator
order for field 'zbus_channel_data::highest_observer_priority'
does not match declaration order in `zbus_channel_data`.
Solution: change order in `ZBUS_CHAN_DEFINE` macro according
to zbus_channel_data structure.
Signed-off-by: Mariusz Dziębowski <mdziebowski@meden.com.pl>
- Allow setting polarity from DT.
- At least on bcf, going from 0 to 255 causes brightness to decrease
(although 0 is still off and 255 is still on).
- Seems to work as expcted by using TnPWML register.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
TX/RX FIFO underrun shouldn't crash the RTOS when it occurs.
Also, since this can also happen under "normal" conditions
(i.e: DMA doesn't copy data fast enough from/to SAI's FIFOs)
the software should be able to recover from it.
As such:
1) Remove `z_irq_spurious()` call.
2) Clear error flag
3) De-escalate error message to warning message
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit rebrands the STM32 EXTI API to a more hardware-agnostic
"GPIO interrupt controller" API, in anticipation of the introduction of
new series lacking the EXTI peripheral. The GPIO and EXTI drivers are
updated to match the rebranded API.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit makes the contents of the stm32_exti_line_t data type opaque to
the EXTI GPIO interrupt controller API users. The GPIO driver is updated
to comply with this API change.
N.B.: while some assertions are removed as part of this commit, they were
broken since forever anyways, so nothing of value is lost.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Move the functions that interact with EXTI configuration registers to
select or get the GPIO port that triggers events on a given EXTI line
to the EXTI driver.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Modify all functions in the GPIO driver that interact with the EXTI
so that names, signatures and comments match what they do better.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Use the `gpio_pin_t` type for all variables that hold a pin number (0..15).
Change all `int` to `uint32_t` instead, as signedness is unwanted.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit reorders the functions in the EXTI driver.
Internal functions and exported functions are now grouped with each other.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit changes the EXTI driver API to use unsigned types
for all parameters previously typed as `int`, as the signedness
is unneeded and unwanted.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
All assertions performed in the EXTI drivers were wrong, as they passed
values to __ASSERT_NO_MSG instead of predicates. Update all assertions
to be actually useful.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The EXTI driver API defined in exti_stm32.h is reserved for exclusive usage
by the STM32 GPIO driver, which doesn't use this macro. Since there is no
usecase for it anyways, it can be removed for future-proofing.
The STM32 UART driver is an unintended user of this definition, however.
Replace it with a private #define which is more appropriate anyways.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Update check_compliance to handle auto defined ZEPHYR_<name>_MODULE
Kconfig symbols.
check_compliance runs three levels of Kconfig check.
A basic and a full, both which uses the generated Kconfig.modules
created according to Zephyr modules present.
A Kconfig check where no Zephyr modules are sourced. This check ensures
that Zephyr Kconfig tree doesn't refer to Kconfig symbols defined in
Zephyr module's local Kconfig trees.
However, there are a few auto generated symbols which are allowed,
such as: `ZEPHYR_<name>_MODULE` and `ZEPHYR_<name>_MODULE_BLOBS`.
Therefore, when testing no blobs, filter the generated Kconfig.modules
file, so that no sourcing of extra Kconfig files are performed but
lines defining `ZEPHYR_<name>_MODULE` and `ZEPHYR_<name>_MODULE_BLOBS`
are preserved.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
apollo3 driver added PM to UART for only apollo3
but defined PM function for both causing an error
in twister
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
In RISCV "sepc" is actually the name of an instruction.
As this prevents building. We should remove the line.
Signed-off-by: Sven Ginka <s.ginka@sensry.de>
This commit excludes the `m2gl025_miv` platform from running the
`kernel.common.stack_sentinel` test. It experiences the same issue as
`hifive1`, which was described in issue #66070.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Automatically handle device runtime PM for all flash API calls.
Asynchronously release the device after a small delay to minimise power
state transitions under multiple sequential API calls (e.g. NVS).
Signed-off-by: Jordan Yates <jordan@embeint.com>
Remove `SPI_NOR_IDLE_IN_DPD` to simplify the possible transition states
in the `spi_nor` driver. This option was originally added 5 years ago
when device runtime PM was in a much less mature state.
I do not believe having a separate power management implementation for
this one in-tree driver is in the interests of the project.
The behaviour of `SPI_NOR_IDLE_IN_DPD` leads to extremly suboptimal
behaviour in use cases where multiple small reads are performed
sequentially, see #69588.
Removal of this option does not break the behaviour of any existing
applications, only increases current consumption in idle by ~10uA until
device runtime PM is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When change unaware client send ATT request it shall get Database
Out of Sync error. Reading GATT database hash is an exception here.
This was affecting GATT/SR/GAS/BV-05-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Background of this modification is to make clock control
driver code provided by Renesas vendor to support for Renesas MCU
on Zephyr.
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
A 16-bit value built using byte shifts and ORs from a given
couple of lsb and msb bytes will result to be the same on both
little-endian and big-endian architectures, e.g.
uint8_t lsb, msb;
int16_t val;
/* val is the same number on both le and be archs, but has
different layout in memory */
val = (msb << 8) | lsb;
All the xyz_raw_get() APIs of stmemsc sensor module build the sensor
data using the above method and DO NOT hence require (it actually leads
to wrong values on big-endian machines) to use any le/be swap routines,
such as sys_le16_to_cpu().
Fix#75758
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Updated the counter_mcux_lptmr driver to support multiple
instances of the lptmr peripheral. Also added a new
binding property to identify if the user is using
counter-mode or pulse mode. since we were previously using the
prescaler value to check this which could be wrong
if used as a division value for getting the freq.
Added a property that allows the user to decide
what the counter value in lptmr should be divided by.
Cleaned up INIT macro for lptmr.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
dts: arm: nxp: mimxrt1180_evk: add GPT1/2 instance into devicetree
Enable GPT1/2 clock
Add GPT1/GPT2 instances
Set GPT2 as a counter, the default frequency is 240000000
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
The reset function uses uint32_t as its 2nd parameter, which leads to the
following compiler warning.
zephyr/drivers/mipi_dbi/mipi_dbi_stm32_fmc.c:176:18: warning:
initialization of 'int (*)(const struct device *, k_timeout_t)' from
incompatible pointer type 'int (*)(const struct device *, uint32_t)'
{aka 'int (*)(const struct device *, unsigned int)'}
[-Wincompatible-pointer-types]
176 | .reset = mipi_dbi_stm32_fmc_reset,
| ^~~~~~~~~~~~~~~~~~~~~~~~
When you look at similar drivers,
/drivers/mipi_dbi/mipi_dbi_smartbond.c#L126
/drivers/mipi_dbi/mipi_dbi_nxp_lcdic.c#L561
you notice they use k_timeout_t.
So the whole fix is to correct the type.
Signed-off-by: Thorsten Spätling <thorsten.spaetling@vierling.de>
Round up buffer size used in UDC_BUF_POOL_DEFINE() to respect the
required buffer granularity. The issue was observed with UAC2 explicit
feedback data, but the problem applies to any UDC_BUF_POOL_DEFINE() use.
In order for every buffer returned by UDC_BUF_POOL_DEFINE() to be both
aligned and to have required granurality, it is required to allocate the
buffers for ROUND_UP(size, LCM(UDC_BUF_GRANULARITY, UDC_BUF_ALIGN)).
Because we do not have Least Common Multiple nor Greatest Common Divisor
compile time macros, assume that granularity is multiple of alignment.
Validate the assumption with a build time assert. When we get a target
where this assumption fails we would have to come up with a solution to
compute LCM and/or GCD at compile time.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Remove the early max packet size check on endpoint activation, because
there are valid use cases where the max packet size is not multiple of 4
and the stack won't perform multi-transaction transfers. Example use
case is UAC2 explicit feedback endpoint that has Max Packet Size equal
3 when device is operating at Full-Speed.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Fail TxFIFO write if the endpoint is not activated, because there is
essentially no fifo assigned. Writing to not activated endpoint is
possible, but it does tend to corrupt fifo number 0 which is used for
control transfers. USB stack should not really be attempting to write to
endpoints that have not been activated (ep_enable called).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Store SOF frame number and use the information to set the Even/Odd
microframe bit when enabling isochronous endpoints. Reject received
isochronous data if number of packets received does not align with
received PID.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
RxFLvl interrupt should only handle the actual data movement from RxFIFO
to the buffer. OUT transfers are completed in XferCompl handler both in
DMA and Completer mode. This reduces code size by avoiding having
separate code paths based on operating mode.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Function dwc2_set_dedicated_fifo() calls dwc2_flush_tx_fifo() before the
diepctl register is written. The register will be only written after the
dwc2_set_dedicated_fifo() finishes. Solve the problem by passing fifo
number directly instead of endpoint address to dwc2_flush_tx_fifo().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add all register bit defines necessary for isochronous transfers. Clean
up the endpoint transfer size register defines clearly separating IN and
OUT registers because they do use different bit fields. Add alternate
bit names for bits that do have different meaning based on configured
endpoint transfer type.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The clang-format check outputs a git diff with surrounding context. It
naively removed the first and last 3 lines, but this does not work if
there are less lines.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
As the .bin & .hex build output is optional
and it can be disabled by CONFIG_BUILD_OUTPUT_BIN/HEX,
add support for the mandatory .elf build output
to the pyocd runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The terminal offset for subcommands' help text isn't
computed correctly, fix it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
- Use `SHELL_CMD_ARG_REGISTER` for the main cmd to state the
required number of arguments, this helps to remove the
runtime check from the command, and also print the help
message to the terminal when the argument count is
unexpected.
- Some changes to the help text that hopefully makes the
mandatory and optional arguments more obvious to the user
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Reset delay was not being calculated correctly in lcdic driver, the
ticks field needs to be accessed directly within the timeout structure
to calculate the correct delay time
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Exclude RW612 based boards from the WiFi testsuite, as these boards
require binary blobs be downloaded in order to build as expected
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds unittests for the CAP Initiator start procedure, simply
verifying that the procedure works as well as
testing invalid parameters.
This also allows us to remove the invalid behavior checks
from the babblesim test implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
disk_access functions were called from an interupt context, thus
crashing on mutexes (no sleep is allowed in interrupt context).
The usage of a spinlock is permitted. The functions guarded by
the spinlock are executed very quickly anyway, so the spinlock
is applicable.
Signed-off-by: Alexi Demers <alexi.demers@axceta.com>
Usb "write" method never copies the input data buffer, it uses the
buffer pointer directly. The fact that it was on the stack made
the buffer ephemeral, and could disappear before the USB transfer
actually occurred. The data transmitted was then random. This commit
converts the transfer buffer to a static buffer, so that it always
exists for the duration of the USB transfer.
Known side-effect: if "read capacity" command is read twice
simultaneously, the same buffer will be used twice. As the capacity of a
USB drive should not change between 2 calls, this side effect can be
ignored.
Signed-off-by: Alexi Demers <alexi.demers@axceta.com>
This provides memory mappings with the ability to be initialized in their
paged-out state and be paged in on demand. This is especially nice for
anonymous memory mappings as they no longer have to allocate all memory
at mem_map time. This also allows for file mappings to be implemented by
simply providing backing store location tokens.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- Removed zero initialization of `pincfg` structure as all members
are guaranteed to be set.
- Introduced `pfs_cfg` as an intermediate variable to store data in
the CPU register instead of stack.
- Simplified pin setting logic by relying on `pfs_cfg` being
zero-initialized, eliminating the need for explicit bit clearing.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add power management support to various drivers:
- gpio-kbd-matrix
- ite,it8xxx2-kbd
- nuvoton,npcx-kbd
- microchip,xec-kbd
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add power management support to the keyboard matrix library. This
provides a generic pm_action function that changes the keyboard matrix
scan in two places when suspended:
- reset the state to 0 for all columns
- do not enable key press detection
This ensures that any key that was pressed when the device is suspended
is released, and no other scan happens until the device is resumed.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The latency_measure benchmark is designed for systems with a single
CPU. When the system allows for multiple CPUs, instead of forcing
a single CPU to be used via 'prj.conf', spawn a non-preemptible
thread to keep the other CPUs busy.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Update changes about `arch_stack_walk()` in RISCV, ARM64 & X86.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Having `CONFIG_EXCEPTION_STACK_TRACE_SYMTAB` to select the
`CONFIG_SYMTAB` or to explicitly not print the symbol name
during exception stack unwind seems unnecessary, as the extra
code to print the symbol name is negligible when compared with
the symbol table, so just remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently it supports `esf` based unwinding only.
Then, update the exception stack unwinding to use
`arch_stack_walk()`, and update the Kconfigs & testcase
accordingly.
Also, `EXCEPTION_STACK_TRACE_MAX_FRAMES` is unused and
made redundant after this change, so remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Currently it supports `esf` based unwinding only.
Then, update the exception stack unwinding to use
`arch_stack_walk()`, and update the Kconfigs & testcase
accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit introduces a new ARCH_STACKWALK Kconfig which
determines if the `arch_stack_walk()` is available should the
arch supports it.
Starting from RISCV, this will be able to converge the exception
stack trace implementation & stack walking features. Existing
exception stack trace implementation will be updated later.
Eventually we will end up with the following:
1. If an arch implements `arch_stack_walk()`
`ARCH_HAS_STACKWALK` should be selected.
2. If the above is enabled, `ARCH_SUPPORTS_STACKWALK` indicates
if the dependencies are met for arch to enable stack walking.
This Kconfig replaces `<arch>_EXCEPTION_STACK_TRACE`
2. If the above is enabled, then, `ARCH_STACKWALK` determines
if `arch_stack_walk()` should be compiled.
3. `EXCEPTION_STACK_TRACE` should build on top of the
`ARCH_STACKWALK`, stack traces will be printed when it
is enabled.
4. `ARCH_STACKWALK_MAX_FRAMES` will be removed as it is
replaced by `ARCH_STACKWALK_MAX_FRAMES`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add `arch_stack_walk()` under the `arch-interface` group and
add documentation on how to add support for it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix missing implementation to handle Broadcast ISO MIC
failure during Broadcast ISO establishment, and during an
already established Broadcast ISO sync.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adding myself as maintainer because my employer Husqvarna wants to
upstream SiM3U support to Zephyr, and keep it well-supported.
Adding as collaborator M1cha, because he did the initial port and
Asmellby, jerome-pouiller, and jhedberg because they take care of
all Silabs products.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This is just the driver for banks 0 to 3. Bank 4 will come via a
separate commit since it needs a different driver.
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
This serves two main purposes:
- change the CPU clock via devicetree nodes
- provide the APB frequency to device drivers via the clock driver
interface
Theoretically this could also support choosing between the available
clock sources, but right now we only support LPOSC0 going into PLL0,
going into AHB.
Turning the PLL back off is also not supported since the only current
use case is to set the PLL frequency, turn it on, and switch the AHB
over to it.
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
This is the bare minimum and includes the SoC, pinctrl, flash and
devicetree.
I had to include the flash driver that early because I couldn't make
Zephyr compile without flash driver nodes in the device tree.
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Can be used only once the SiM3U SoC support has been added.
Developed-by: Michael Zimmermann
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
For applications that rely on low noise/variance in accelerometer
sample reading. Application can take advantage of integrated LPF
Thus this PR adds LPF configuration capability to the mc3419 driver
Signed-off-by: Anuj Pathak <anuj@croxel.com>
Very very weird behavior.
Deleting the `options & BT_LE_ADV_OPT_USE_NRPA` branch in
`id.c:bt_id_set_adv_own_addr` makes the test pass. But add a log in that
branch, and you'll see that we never take it in the UT binary..
I don't have time for this, maybe some compiler guru or C language
lawyer can look at that decompiled function and figure out the root
cause.
Someone should also really fix the Bluetooth unit tests and make them
run on any Bluetooth related PR. Also nightly.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
We want to make sure `struct closure` fits in the user data, so a user data
size of `sizeof(struct closure)` is valid.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Reuse the file clock_stm32g0.c for the STM32U0 and
rename it to clock_stm32g0_u0.c
because the G0 and U0 series share the same clock control.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Move negative tests for flash driver to a separate test suite.
Run negative tests only on platforms that are aligned.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
This commit addresses an issue in net_context_bind() where unaligned
memory access was not properly handled when checking for INADDR_ANY.
The problem primarily affected MCUs like ARMv6 that don't support
unaligned memory access.
- Use UNALIGNED_GET() to safely access the sin_addr.s_addr field
- Ensures correct behavior on architectures with alignment restrictions
This fix improves compatibility and prevents potential crashes or
unexpected behavior on affected platforms.
Signed-off-by: Daekeun Kang <dkkang@huconn.com>
If we receive incoming neighbor solicitation packet and drop
it for some reason, ignore some of the errors which are not
really errors so that the icmpv6 handler does not complain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure that incoming DAD NS message is allowed in
so that we can detect duplicate address detection NS packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To specify the serial number, JLink expects either one argument
('--dev-id=xxx') or two (e.g. '--dev-id' 'xxx'), but it can not deal
with a single one that is '--dev-id xxx'.
The problem has been introduced (or just made visible?) by commit
5ee4284320 (twister: runner: j-link: use
dev-id instead of SelectEmuBySN) in PR #76931.
How to reproduce:
1. Create a HW configuration map, e.g.:
```
$ cat zephyr-hw-map-nrf52840dk-1.yml
- connected: true
id: '683517317'
platform: nrf52840dk/nrf52840
product: nRF52840 DK 1
runner: jlink
serial: /dev/ttyACM-nrf-dk-1
```
2. Run test `logging.dictionary` with Twister:
```
$ west twister --platform nrf52840dk/nrf52840 --device-testing \
--hardware-map zephyr-hw-map-nrf52840dk-1.yml -s logging.dictionary
```
3. The build will fail, and the `twister_harness.log` contains:
```
10:21:24.375:DEBUG:twister_harness.device.factory: Get device type
"hardware"
10:21:24.375:DEBUG:twister_harness.device.hardware_adapter: Opening
serial connection for /dev/ttyACM-nrf-dk-1
10:21:24.376:DEBUG:twister_harness.device.hardware_adapter: Flashing
device 683517317
10:21:24.376:DEBUG:twister_harness.device.hardware_adapter: Flashing
command: <snip>/bin/west flash --skip-rebuild --build-dir
twister-out/<snip>/tests/subsys/logging/dictionary/logging.dictionary
--runner jlink '--dev-id 683517317'
10:21:24.590:ERROR:twister_harness.device.hardware_adapter: Could not
flash device 683517317
10:21:24.592:DEBUG:twister_harness.device.hardware_adapter: Closed
serial connection for /dev/ttyACM-nrf-dk-1
```
(note the '--dev-id 683517317' part)
4. Running the stated `west flash` command shows the following error
message:
```
-- west flash: using runner jlink
FATAL ERROR: runner jlink received unknown arguments: ['--dev-id
683517317']
```
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Ensure initial search menu visibility is properly set so that key
events don't get trapped preventing arrow key navigation on the
document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Net capturing would not link when either IPv6 or IPv4 was switched off
due to missing symbols. This change allows for capturing a single IP
protocol only.
To reproduce:
samples/net/sockets/http_client/prj.conf
```
-CONFIG_NET_IPV4=y
+CONFIG_NET_IPV4=n
-CONFIG_NET_CONFIG_NEED_IPV4=y
+CONFIG_NET_CONFIG_NEED_IPV4=n
+
+CONFIG_NET_CAPTURE=y
```
This will cause the following linker error:
```
.../subsys/net/lib/capture/capture.c:648:
undefined reference to `net_if_ipv4_get_ttl'
```
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Improved debuggability of IEEE 802.15.4 network management commands.
Some of these conditions were especially hard to debug (e.g. invalid
channels due to the wrong driver being selected, conflict between
settings, ...)
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Low throughput links (e.g. IEEE 802.15.4) require additional stack and
buffering resources. Therefore some stack and buffer pool sizes were
increased to cater for over-the-air scenarios.
Fixes: #77287
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
SOF is designed with the idea that the data transfer
between the host memory and local memory is performed via
DMA. This is not true for imx platform in which the DSP
performs this operation.
Because of the aforementioned design, SOF performs a
cache invalidation operation on the destination memory
region before data is copied further down the pipeline.
For some imx platforms, the destination memory region is
cacheable. As such, some of the data transferred from the
host memory region is held entirely in cache, which means
the RAM and the cache have different data for the same
memory region.
In such cases, performing cache invalidation forces
the DSP to fetch data from RAM instead of the cache, which
means the DSP will read stale data and propagate it further
down the pipeline.
Although not optimal and mostly as a workaround to this issue,
perform a cache WB operation on the destination memory region
to make sure that the cache and the RAM hold the same data.
During the data read operation (to copy it further down the
pipeline) after the aforemention cache invalidation, the DSP
will no longer end up reading stale data.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
When CONFIG_RISCV_VECTORED_MODE is disabled, CLIC claims interrupts using
CSR 'mnxti' and handles all pending interrupts before exiting the ISR.
When CONFIG_RISCV_VECTORED_MODE is enabled, all interrupts use vector mode
and are claimed automatically. The RISC-V common ISR is used for interrupts
hooked into SW ISR table, but it only handle one pending interrupt per ISR.
This commit enhances CLIC to set vector mode for direct ISRs only and use
the CLIC common entry for regular ISRs to handles multiple pending
interrupts in an ISR.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Introduce riscv_clic_irq_vector_set() to implement z_riscv_irq_vector_set()
for CLIC. This commit also introduces CONFIG_CLIC_SMCLICSHV_EXT to indicate
support for the smclicshv extenion and riscv_clic_irq_vector_set().
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Introduce z_riscv_irq_vector_set() to hook into ARCH_IRQ_DIRECT_CONNECT(),
allowing users to set vector mode for a specified ISR.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Add two new commands that automatically locally host the generated
documentation upon completion and rebuild/rehost when the input files
change without any user interaction.
For more info see: https://pypi.org/project/sphinx-autobuild/
Signed-off-by: Jordan Yates <jordan@embeint.com>
Get the output directory from environment variables instead of
attempting to reparse the CLI arguments, as these can actually refer
to a program other than `sphinx-build` (for example `sphinx-autobuild`).
Signed-off-by: Jordan Yates <jordan@embeint.com>
Adds string names to the groups in MCUmgr when the enum mgmt
Kconfig is enabled to support listing names of groups
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a new MCUmgr group which allows for listing which groups are
supported by the MCUmgr server by remote devices.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a group callback function which can be used to iterate over
all the registered MCUmgr command groups
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Since the clock node is not a child node of the soc node,
but from the root node.
This removes the warning log at compilation.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Most of BT_FOO symbols that are designed to select the hci driver
implementation which will drive the comunication with controller are
selected based on device tree compatible and should not be made available
as an configurable option to the user.
To do this, remove the prompt on these symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
FCB was being relocated to the wrong location, and the flexspi clock
setup was not being relocated.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The current video drivers did not allow VIDEO_EP_ALL to be selected,
as used by video_stream_stop().
This adds the VIDEO_EP_ALL to each video driver that filtered endpoints.
Signed-off-by: Josuah Demangeon <me@josuah.net>
This define the enum values so that they never clash with custom
endpoint IDs passed numerically, for devices that supports more
than one IN or OUT enpoint.
This also documents semantics for VIDEO_EP_IN/OUT/ALL/NONE,
while renaming VIDEO_EP_ANY to VIDEO_EP_ALL to remove the
ambiguity when there are several IN and/or OUT endpoints.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Add a simple test to showcase how RNG can be configured on different
platforms in order to allow Mbed TLS's PSA crypto implementation to
work properly.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit just moves some code around. For sake of cleanliness
a new file is added to hold the entropy parsing functions
for Mbed TLS.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is meant to be used only for tests on platforms where CSPRNG
sources are not available. It should not be used in production.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Improve the description of both MBEDTLS_PSA_CRYPTO_LEGACY_RNG and
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG kconfig symbols.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENABLED suffix does not really makes much sense for a kconfig
so it should be removed. Also other MBEDTLS symbols were recently
updated accordingly.
Moreover having it named exactly the same way as in Mbed TLS
symplifies the understanding of what this kconfig is doing.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Enable the `MBEDTLS_PEM_WRITE_C` mbedtls configuration option when
`CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT` is selected.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
ESP32 SoC has multiple revisions, some of which are not supported
by the current implementation, as such as REV0 and REV1. This PR
adds an option to indicate user that this is not recommended and not
supported.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Check if lines from serial are processed one by one
in case when was received in one buffer from redline method.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Readline method sometimes receives more lines in buffer.
Split them to avoid misinterpreting data in harness module.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The ENABLED_SECTION option is not a YES/NO option but should
contain a list of section label to be processed. For example,
adding INTERNAL_HIDDEN will make doxygen to look through all
the blocks with "@cond INTERNAL_HIDDEN" and "@endcond". So
just remove the "YES" and leave it an empty list.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the #ifdef to enclose the associated doxygen block.
Or else the function prototype are ignored/skipped but doxygen
still processes the block, and it will apply the documentation
to the next function in the file... and it will complain about
parameters not being found.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Building with NEWLIBC triggers warnings about
snprintf since stdio is no longer automatically
included by printk.h
This PR switches to using snprintk to avoid these
warnings.
Fixes#77330
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
The heltec_wireless_stick_lite_v3 board does not properly handle
receive operations when the SPI used to communicate with onboard SX1262 has
the clock frequency set too high. This causes radio recv operation to
almost always hang forever without any error, as the SX1262 module returns
0xFF00 value as the interrupt status which does not make any sense, thus
causing the LoRaWAN library to trigger RXTX timeout handler which in the
current SX1262 driver implementation is not privded. The issue occurs
almost always, sometimes allowing to receive few (3-5) tranmissions
correctly, then fail. The root of the problem is not known for sure, but it
is highly likely a board's limitation, though not confirmed by the
manufacturer.
The current SPI frequency was chosen arbitrarily based on the conducted
experiments where the 30 000 messages have been received continiously
without any problems (with 5s interval for each message).
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
Currently, the test doesn't clear the control data buffer before
calling recvmsg. This leads to recvmsg being unable to add the new
control data, which corresponds to the current received data.
This commit aims to clear the control data buffer to match most use
cases, when the control data buffer is empty before calling recvmsg.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
According to recvmsg man page, msg_controllen should be set to the sum
of the length of all control messages in the buffer.
This is missing from the current recvmsg implementation.
This commit aims to fix this by updating msg_controllen each time control
data are added to the buffer.
This commit also fixes cases where the msg_controllen is cleared
incorrectly.
Fixes#77303
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Use pytest-args parameters provided in command line after
parameters taken from yaml file. The last occurence is
considered by argparse, so parameters from command line
will be used.
Fixes: #77319
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Fixes division by zero exception when SPI is configured to operate in mode3
whit CS controlled by software.
Such exception occurred because data->dfs is listed as the denominator in
a division inside the spi_esp32_transfer() function which is called from
spi_esp32_configure() (before assigning a value to data->dfs) inside
transceive() in the condition where mode 3 is chosen as the SPI operating
mode and the chip select is configured to be software-controlled.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Run clang-format on drivers/led/lp5569.c to align formatting in the file.
No functional changes intended.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
The lp5569 features a double functioning pin for enable and pwm control.
The chip, however, uses the first rising edge to initialize and get ready
for i2c communication, and then the pin alters function to pwm mode.
Add support for providing enable-gpios to the lp5569 in the dts, which
will make sure to assert the pin and wait for the chip to initialize
before attempting further configuration of the chip.
Signed-off-by: Emil Juhl <emdj@bang-olufsen.dk>
The lp5569 controller contains an internal charge pump which can be useful
for driving LEDs with a forward voltage greater than the lp5569 supply.
Taking advantage of the charge pump can alleviate the need for an external
boost converter.
Add a dts property, charge-pump-mode, to the ti,lp5569 binding with which
the cp_mode bits of the MISC register will be configured.
Following the datasheet, the possible configurations are:
0x00 -> disabled (default)
0x01 -> 1x mode
0x10 -> 1.5x mode
0x11 -> auto mode
Signed-off-by: Emil Juhl <emdj@bang-olufsen.dk>
Introduces the test for testing the new functionality
of ztest shell.
Passing -r (repeat iter) parameter. This allows to run
a particula testcase or testsuite several times.
Passing -p (any value) parameter. This allows to provide
a parameter to a test at runtime.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Expanding the ZTEST shell to include a command that
accepts additional parameters, such as ztest run_testcase
<suite:test> -p any_value.
Adding the new ZTEST_P macro, to create the
parameterized test.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Expand ztest_shell subcommands `run-testcase`
and `run-testsuite` to include additional parameter `-r`
repeat-iter. This allows to run a particular testcase or
testsuite several times.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Mark the POSIX_SIGNALS Option Group as supported to the extent
possible under Zephyr, as Zephyr does not yet support processes.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Since Zephyr itself does not currently support processes, but
conformant applications should still be able to link, add stubs
for the remaining POSIX functions in the POSIX_SIGNALS Option
Group.
The POSIX_SIGNALS Option Group is required for PSE51, PSE52,
PSE53, PSE54, and likely many other POSIX Subprofiles.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Newlib requires an alias for the getpid() function. There was
a Kconfig already present for doing so, but the actual alias
was missing.
So this is technically a bugfix.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The buffer flags MPSC_PBUF_FULL is a shared resource to determine
whether the buffer is available. When processing drop messages,
the flag will be cleared first and then set, add spin lock protection.
Signed-off-by: Xiaolu Sun <xiaolu.sun@intel.com>
Route `configure` and `recover_bus` through the RTIO framework to avoid
race conditions. Update `RTIO_OP_I2C_RECOVER` implementation to actually
recover the bus, instead of triggering a loop.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Incorrect value set by user when using sensor_attr_set can fail silently
since it always returns 0.
Fix by adding ret. Also added return on sensor_attr_get.
Signed-off-by: Aiman Mazlan <mohammad.aiman@stratusauto.com>
Initial CMake yaml module to facilitate reading yaml files into CMake,
update yaml settings and write it back to a file.
The yaml module also supports creation of yaml files from scratch.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a new zephyr_check_arguments_required_allow_empty() macro for
function argument validation.
Zephyr already has a zephyr_check_arguments_required() for checking
required arguments, like
zephyr_check_arguments_required(foo_func <prefix> FOO BAR)
which ensures that one of FOO or BAR are given in a call like:
foo_func(BAR val)
One limitation however, is that is some cases BAR may be allowed to be
empty, so that it's still possible to know if FOO or BAR were supplied.
In most case, BAR and FOO will have values following the keyword, like:
foo_func(BAR my_bar_val)
foo_func(FOO my_foo_val)
but in cases where `my_bar_val` is a variable which may be empty, like:
set(my_bar_val)
foo_func(BAR ${my_bar_val}) # (expands to: foo_func(BAR)
then BAR was actually supplied.
To support functions where such empty expansion is allowed, then a new
helper macro `zephyr_check_arguments_required_allow_empty()` has been
implemented, as to be able to distinguish `foo_func()` from
`foo_func(BAR)` when parsing arguments.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Toggling `CONFIG_USERSPACE` to `y` results in compilation
errors caused by the fact that various k_* functions don't
have their prototypes included in the SCMI sources (e.g:
`k_mutex_*`, `k_sem_*`, `k_is_pre_kernel()`).
To fix this, switch to using the `kernel.h` header instead
of `sys/mutex.h`. Previously, this worked because `sys/mutex.h`
included `kernel.h` if `CONFIG_USERSPACE` was set to `n`.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
When running on native_posix, the thread needs to be created
before the thread name can be set.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This will update the posix thread names to match
the zephyr thread names.
This will simplify debugging as the debugger will
recognize the thread names.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The intention of this API is to allow setting the posix thread
name equal to the zephyr thread name.
By defining it as an arch interface, the implementation becomes
generic.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Newer Xtensa toolchain needs to include xtensa-types.h so that
macros in tie.h can be used without compilation errors.
The exact verison needing this is unknown but first encountered
in RJ-2023.2. Tested with older toolchain and that did not
cause any compilation errors so just include xtensa-types.h
if xt-clang is used. Haven't seen newer toolchains being
generated with xcc, so skip that for now.
Note that Zephyr SDK and the public HAL in Zephyr do not provide
this file.
Signed-off-by: Anthony Giardina <anthony.giardina@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The gtest 1.15 has slightly different output from the original one that
was used to set up the harness. With this change we support both output
formats.
Fixes#72318
Signed-off-by: Yuval Peress <peress@google.com>
Fixes the adxl345 accelerometer driver to return zero on sample fetch
success, as specified by the sensor driver API. Prior to this change,
the driver incorrectly returned a positive non-zero value on sample
fetch success, which in turn caused a bus fault getting data with the
sensor shell.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Initialize the missing chunk field when canceling a BLOB Transfer.
If you canceled a BLOB Transfer, the missing_chunk was not cleared in
the next BLOB Transfer. This can make it look like there are still
missing chunks, even though all chunks in the block have already been
received, and it does cause bugs.
Signed-off-by: Junho Lee <tot0roprog@gmail.com>
IMXRT11XX secondary core should not deinit ENET PLL
as it could be configured by primary core.
Signed-off-by: Anders Bjørn Nedergaard <abn@polytech.com>
Add checks to return value of esp_intr_alloc to avoid drivers init
returning 0 when interrupt allocation fails.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Adding macros to convert and validate input config from device tree
for IRQ priority and flags.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This commit moves the test buffer from ITCM (not accessible by DMA) to DTCM
on several NXP boards, to make the test successful.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit places the chan_blen_transfer DMA test's TX and RX buffers
in a separate file that gets entirely relocated. This ensures that the
buffers reside in the correct memory, without breaking other things
due to relocation of test data/code.
Fixes#75676.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Initial commit for entropy support on RA8
- drivers: entropy: implementation for TRNG driver of RA8x1
- dts: arm: add device node for trng of RA8x1
- boards: arm: enable support zephyr_entropy for ek_ra8m1 and
update board documentation
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Add board support for Application, Radio and PPR cores
of the nRF9230 SoC / nRF9280 SiP on the nRF9280 PDK board.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
The nRF9280 is a SiP (System-in-Package) consisting of the nRF9230 SoC
and additional components such as PMIC and others. Additionally,
the nRF9230 contains several CPUs, similarly to the nRF54h20 SoC.
Update nrfx glue, and add necessary Kconfig and initialization code
to allow building for nRF9280 targets: CPU, Radio and PPR cores.
The nRF9280 is used for all user build targets and Kconfigs,
whereas the nRF9230 is used as the build target for the MDK.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Move mpu_region.c to common folder, to re-use with nRF92.
Rename it to nrf54hx_nrf92x_mpu_regions.c to indicate
which product series it applies to.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Add definition of the nRF9280 SiP with its Application,
Radio, and Peripheral Processor (PPR) cores and a basic set
of peripherals: GRTC, GPIOs, GPIOTE, and UARTs and few others.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Monitor mode relies on core Wi-Fi management functions, so, the file
should be included for both system and system with raw modes.
Fix this by adding a hidden symbol.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If Wi-Fi management is enabled, then independent of modes scan
functionality is always included.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is a fix from QSPI-NOR driver to wait for clock divider change to
be applied and take effect.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For less than 32MHz using HFCLK192M, /2 divider should be used and only
for Anamoly159 /1 divider should be used.
Without this fix 8MHz clock in DTS uses 16MHz clock.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
SHEL-2947] Option to set either PS-poll or QoS null frame based
power save data retrieval mechanism.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Removes the requirement for the different layers in the OS agnostic
parts of the driver having to maintain a handle to the OS interface
layer in order to call the OS interface calls. The OS interface layer
now maitains the handle to OS-specific ops internally and invokes the
appropriate functions.
Fixes SHEL-2639
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
[SHEL-2542] When reset command is called this will
reset all statistics including firmware and host.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
[SHEL-2054] Adding a kconfig option for WMM.
By default it will be enabled. If user needs
to disable it, set it as n.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Adds an optional callback which can be used to append custom
fields to the image slot state command response
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
errno is defined by the ISO C standard to be a modifiable lvalue of type
int, and **must not be explicitly declared**
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
1. tm_mon in rtc_time structure has a range [0, 11],
while the RTC expects [1, 12]. Add missing
increasing / decreasing of this value.
2. Fix typo in debug log
Signed-off-by: Daniel Kampert <DanielKampert@kampis-elektroecke.de>
The r0 register holds the system_off function pointer. As r0 is a scratch
register, the pointer needs to moved to a preserved register before
branching to a (custom) marker function.
Furthermore, in accordance to rule 6.2.1.2 of aapcs32, the stack pointer
needs to align on 8 bytes. Hence r0 is pushed to the stack in addition to
the lr register, before calling the public interface of checking the
s2ram marker.
Signed-off-by: Hessel van der Molen <hvandermolen@dexels.com>
Do not try to format each single failure, this will take too long to
process and will run for hours and spam GH.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a new board definition for the ADI MAX32690FTHR board. This board
uses the same SoC as the MAX32690EVKIT board, but with a smaller feather
form factor.
Tested on hardware with the following samples:
- samples/hello_world
- samples/basic/blinky
- samples/basic/threads
- samples/subsys/shell/shell_module
- samples/subsys/input/input_dump
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
NXP IMX USDHC fallback card detection method changed from querying the
peripheral to simply assuming the card was present. Add a note to the
migration guide highlighting this and explaining how to restore the
previous behavior for anyone using this detection method.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The imx USDHC driver previously queried the peripheral's internal card
detect signal to check card presence if no card detect method was
configured. However, some boards do not route the card detect signal and
do not work correctly with the DAT3 detection method supported by this
peripheral. As a fallback, assume the card is present in the slot but
log a warning to the user.
Fixes#42227
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Modify the condition in the parse_testplan
function to align with the changes in the Status class.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Updated the clocks that get initialized for the MCXN947
when using the LPTMR. The LPTMR allows the user to select
and Input clock, however said input clock must be
initialized before the user can select it.
Update description for clk-source in binding file.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Move default of monolithic and fw loader, options, etc to the
common kconfig files rather than defaulting in soc file.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Consolidate the ROM RAMLOADER config to be in one place,
add a new Kconfig file to be included by the SOCs with the feature.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The CONFIG_USB_MCUX_CONTROLLER_TYPE choice config
is not necessary, let's just remove it. Theoretically,
if there was an SOC with the EHCI and LPCIP3511, then
it might cause a build error, but there is no SOC
which is supported on this legacy driver that has that.
Remove all settings of it in the SOC files.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Currently this code related to how to configure the
flash size and address when using flexspi to XIP is copy
pasted in all sort of places and ways all over the tree,
let's clean this up and have single point of control over
this configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Move all dependencies of the family config to series level,
and put a disclaimer saying not to use the family config.
Change all occurrences of the family config in code to the
MCXNX4X series config.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Some flash/memc drivers like flexspi will want to default the
value of the log level to off to avoid RWW hazard while XIP,
to do this, the logging template must be sourced after the driver
kconfig files so that the default value from the driver is able
to be checked, since logging template introduces an unconditional
default otherwise.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
NXP is not supporting these derivative parts in the zephyr upstream,
these references to them should therefore be removed in order to avoid
confusion.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The Kconfig defaults should be in Kconfig.defconfig.
MFD should not be made dependent on the LP flexcomm being
enabled, since MFD can be for other things than just flexcomm.
Change from depends on to an if.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Doesn't seem like there is any reason to be changing the
serial and ADC driver init priorities in the SOC defconfigs.
By default, clock control has priority 30, dma has priority 40,
and serial/adc have priority 50. This seems already to be the order
that is needed, and the original goal of these overrides, which
don't seem necessary anymore.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There are some SOCs which use the same pinctrl
device, but are not really overall that similar to the kinetis
family of SOCs, so prepare to reuse this code by other SOC families.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Moving RT118x kconfigs to series level instead of family level,
and cleaning up redundant declarations, and adding missing
HAS_MCUX_FLEXSPI selection.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Introduced `GPIO_DEVICE_INIT_RA_IF_OKAY` which utilizes `COND_CODE_1`
to reduce the chain of #if DT_NODE_HAS_STATUS(...) #endif
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Refactor the guidelines rule table and add a zephyr rule number
to make it more clear that the coding guideline rules are a
subset of the MISRA-C:2012 rules.
Signed-off-by: Simon Hein <Shein@baumer.com>
Build was failing due to const variable being passed as function param
accepting non-const variable discarding const qualifier. Explicitly cast
to fix the build issue.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The ESAI is already reset during the config_set() function
so no need to also reset it during init().
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The reset pin on the chip is optional, add a soft reset call when the
reset pin is not specified for the device.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Implemented the following:
- `asctime_r()`
- `asctime()`
- `localtime()`
- `localtime_r()`
- `ctime()`
- `ctime_r()`
Specifically:
- the implementation of `localtime()` & `localtime_r()` simply
wraps around the gmtime() & gmtime_r() functions, the
results are always expressed as UTC.
- `ctime()` is equivalent to `asctime(localtime(clock))`, it
inherits the limitation of `localtime()` as well, which only
supports UTC results currently.
Added tests for these newly implemented functions.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`readdir_r()` belongs to the following option group
POSIX_FILE_SYSTEM_R: Thread-Safe File System
Create a new Kconfig `CONFIG_POSIX_FILE_SYSTEM_R` to compile
it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add minimum support for the `west sdk` command.
This only provides completion for the `sdk` command itself.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This command can list and install SDK.
Run 'west sdk install' to install the SDK.
Run without any parameter, installing
specified by SDK_VERSION in the source tree.
'west sdk' to show installed SDK information.
This command is just a wrapper for SDK's setup command,
but it simplifies the installation process. It will be a good
improvement for onboarding first-time users.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removes calling k_busy_wait() and uses k_msleep().
Updates polling rate of EEPROM busy status after read request to 1 ms, as
recommended by the app note.
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
The tests manually include sources that are normally conditionally
included (ie based on kconfig values) in the stack.
The tests should be fixed by the original authors.
For now, force-on the hidden kconfig that enables the log options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
`OTS_CLIENT=y` and `OTS=n` is a valid config.
Since the logs weren't conditionally included, this flew under the radar
for a while.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- got rid of "Others" menu
- JK I made a new one: "Common"
- moved all host-related opts to "Host" instead of "Others"
- moved all audio-related opts behind `if BT_AUDIO`
- moved only controller kconfig to controller/Kconfig.ll_sw_split
- it had a dependency there already
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Having all the configs be visible by default clutters the menuconfig
view. Make them visible only when the corresponding subsys or module is
enabled.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit 698a0c3193 changed the bluetooth_api
section title, which made the reference in the Coding guidelines turn into
"API", which is confusing.
Use a fixed title for that reference to fix the issue.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
2024-08-21 16:43:52 -04:00
6392 changed files with 162728 additions and 48179 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
