This change adds a summary of major enhancements introduced
in v2.7.0 . There were so many it was difficult to narrow
them down!
Great work everyone!
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Updated the doc to use GNU Arm Embedded which is the correct term
according to the official Arm documentation at the time of this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds description on how to use the Arm Compiler 6 / armclang
toolchain with Zephyr.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There was an error in handling of max number of IQ reports
generated by controller. Accordin to BT Core Spec 5.1 the host
may request a number of CTEs to be sampled and reported by
controller while enable IQ sampling. The max_cte_count value
set to zero means sample all CTEs in a periodic advertising chain.
The commit fixes wrong handling of the max_cte_count provided
value to generate expected number of IQ reports.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fixes undefined references to sys_port_trace_k_thread_abort_enter()
and sys_port_trace_k_thread_abort_enter().
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
When the driver was called to set the period length for a channel
to 0, it set the COUNTERTOP register in the PWM peripheral to 0,
what resulted in an undefined behavior of the peripheral (and lack
of the STOPPED event sometimes).
The PWM API does not precise how should a zero length period be
handled; some drivers return the -EINVAL error in such case, some
do not. This patch fixes the pwm_nrfx driver so that it does not
change the previously used COUNTERTOP register value when the period
length is set to 0, and because the pulse cycles are always limited
by the driver to period cycles (so 0 in this case), in result the
relevant channel is simply deactivated. This allows users to switch
off a channel by requesting the pulse width to be set to 0 without
providing a non-zero period in such call.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The receiver and transmitter in the test are synchronized by
use of sleep functions. The change in handling of periodic
advertising synchronized event caused missmach in waiting
times. Receiver is notified about established synchronization
later that it was in the past. Due to that the wait for end
of transmitter operation was too long.
Temporary fix for the problem is decrease of receiver sleep
time by one periodic advertising interval.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
First implementation of periodic advertising sync filtering
requires existence of Direction Finding Extension in Radio
peripheral.
To add the filtering support for other Nodric SOCs software
based PDU traversing for CTEInfo should be implemented.
In case there is no DFE in Radio peripheral, actual filtering
is done in ULL.
The commit provides necessary changes to previous solution.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable filtering of periodic advertisements to synchronize
with advertisenemts that include CTE.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Follow up on changes in lower link layer to add filtering
of periodic advertisements synchronization by CTE type.
The NODE_RX_TYPE_SYNC is used to transport information that:
- Sync is established. In such situation the node_rx
includes data related with received PDU
- Sync scanning is terminated.
In first case ULL will generate NODE_RX_TYPE_SYNC_REPORT
after sending NODE_RX_TYPE_SYNC.
Also EVENT_DONE_EXTRA_TYPE_SYNC handling has additional
execution path that terminates sync scanning if requested
by lower link layer. In other case it adjusts sync scan
window and maintains timeout as usual.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Periodic advertisement synchronization may be filtered by CTE type.
If particular CTE type is not allowed then depening on filtering policy:
- if filtering policy is off synchronization if terminated
- if filtering policy is on synchronization is continued to
synchonize with another device from allowed adverisements list.
If synchronization is established and peer device changes CTE type
to one that is not allowed, synchronization should be maintained.
There are two new execution paths. First one is executed when
synchronization is created. In this case CTEILINE is enabled
to parse PDU for CTEInfo field. In this execution path CTE
type is verified. Second execution path does not include
parsing PDU for CTEInfo and verification of CTE type.
Information about sync allowed is added to node_rx instance
that transports received PDU data. In case the sync has to be
terminated the node_rx will not hold PDU data.
Also done event is extended with information about sync
termination if CTE type is not allowed and filtering
policy is off.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable runtime parsing of PDU to find CTEInfo field CTEINLINE mode
has to be enabled. Thanks to that it is possible to verify if the PDU
has allowed CTE type e.g. for periodic advertising synchornization.
To run CTEInfo parsing other parametrers of CTEINLINE are not relevant.
If Radio is set to disable after PDU END event the CTE sampling
will not be processed.
The commit moves the radio_df_cte_inline_set_enable function to make
it accessible even the direction finding features are disabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing code responsible for handling of allowed CTE types
in HCI_LE_Periodic_Advertising_Create_Sync command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The commit adds helper macros for verification of disallowed
CTE types when periodic advertising synchornization is created.
The macros are added here, because they are directly related
with values specified by BT Core 5.1 specification.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Devices need to be resumed in the reverse order they are suspended.
e.g: devA +---> devB ---> devD
|
+---> devC
They are initialized in the following order, devA -> devB -> devC ->
devD, and suspended starting from the end of the list, devD -> devC ->
devB -> devA. When they are suspended they are temporary put in a list
that is used later to resume them.
This list has to be iterated from the end to the beginning, otherwise a
device may be resumed before its parent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixes#38994, ARP messages were being sent to IPvXmcast MAC addresses
rather than the expected source MAC address or the broadcast address.
Signed-off-by: Robert Melchers <rmelch@hotmail.com>
While adding support for service type enumeration, a regression was
introduced which prevented mDNS ptr query responses.
1. There was an off-by-one error with label size checking
2. Valid queries were failing to match in `dns_rec_match()` due to
not checking for either NULL or 0 "wildcard" port
Fixes#39284
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Documents significant changes to sensor drivers in the v2.7.0 release,
including new drivers added and existing drivers modified.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The assert log of z_priv_stacks_ram_start failed to build due to passing
&z_priv_stacks_ram_start instead of just z_priv_stacks_ram_start.
Fixes#39190
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I have excluded most fixes from this release notes, since it is
difficult to identify those that are worth documenting. Intead I have
focused on new features and major refactoring.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
HS6x nSIM doesn't have dcache_uncached_region property. Its presence
in configs (mdb.args) causes issues with 2021.06 nSIM, so let's
drop this property as it isn't used anyway.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Move related areas to their own files and order
documentation logically from lower to upper layer.
Fix gross errors and inconsistencies.
Co-authored-by: Carles Cufí <carles.cufi@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When CONFIG_KERNEL_COHERENCE=y (e.g on the various intel_adsp
platforms under SMP) it's not legal to share stack memory between
CPUs, because the stack is cached, and the L1 cache is incoherent.
The kernel will automatically detect the mistake when the memory
contains a kernel object (spinlock, IPC object, etc...). But here the
test was just passing async buffers into the msgq layer, and nothing
watches that.
The fix is simple: make them static.
Fixes#35857
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove explicit disable of Channel Selection Algorithm #2
in the mesh tests that use Extended Advertising.
Fixes#39188.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The samples/subsys/mgmt/osdp utilize GPIO so having it set in the
prj.conf is needed since not all platforms enable GPIO by default.
To address the 'No SOURCES given to Zephyr library: drivers__gpio'
add a 'depends on gpio' to the sample.yaml to only build this on
platforms that have GPIO driver support.
Fixes#39180
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Both ARG_UNUSED in pm_info(), cause errors when using PM_DEVICE=y.
Added a default case in pm_info(), to fix warnings.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
Removing two unused "struct fdc2x1x_data" to fix warnings
when compiling with PM_DEVICE=y.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
Use separate DUT and TST builds in EDTT HCI tests so that
the tester can send Data Length Requests with txOctets and
maxTxTime as required by the test specification. TST build
has HCI parameter checks disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Makes miscellaneous fixes to kernel and usermode documentation,
such as fixing broken links and adding clarifying wording.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Fixes: #38959
Currently, the I2C driver returns I2C status register value as error
code when error happen. This PR fixes returning system number and
the return values is negative for error.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
When there are radio events with time reservations lower
than the preemption timeout of 1.5 ms, the pipeline has to
account for the maximum radio events that can be enqueued
during the preempt timeout duration. All these enqueued
events could be aborted in case of late scheduling needing
as many done event buffers.
During continuous scanning, there can be 1 active radio
event, 1 scan resume and 1 new scan prepare. If there are
peripheral prepares in addition, and due to late scheduling
all these will abort needing 4 done buffers.
If Extended Scanning is supported, then an additional
auxiliary scan event's prepare could be enqueued in the
pipeline during the preemption duration.
Fixes#36381.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This allows UT to reconfigure MTU of a channel and get notfied when
channel configuration changed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows application to increase channel's MTU and (in some cases)
MPS. When channel gets reconfigured dedicated callback is called to
inform application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
There's enough meat here to split the content up into areas:
devicetree.h itself, Python tooling changes, and bindings changes.
I also reworked the section describing vendor prefix fixes to use a
table, which I find more readable on a second pass through it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When CONFIG_USERSPACE is enabled, the ELF file from linker pass 1 is
used to create a hash table that identifies kernel objects by address.
We therefore can't allow the size of any object in the pass 2 ELF to
change in a way that would change those addresses, or we would create
a garbage hash table.
Simultaneously (and regardless of CONFIG_USERSPACE's value),
gen_handles.py must transform arrays of handles from their pass 1
values to their pass 2 values; see the file's docstring for more
details on that transformation.
The way this works is that gen_handles.py just pads out each pass 2
array so its length is the same as its pass 1 value. The padding value
is a repeated run of DEVICE_HANDLE_ENDS values. This value is the
terminator which we look for at runtime in places like
device_required_handles_get(), so there must be at least one, and we
error out in gen_handles.py if there's no room in the pass 2 array for
at least one such value. (If there is extra room, we just keep
inserting extra DEVICE_HANDLE_ENDS values to pad the array to its
original length.)
However, it is possible that a device has more direct dependencies in
the pass 2 handles array than its corresponding devicetree node had in
the pass 1 array. When this happens, users have no recourse, so that's
a potential showstopper.
To work around this possibility for now, add a new config option,
CONFIG_DEVICE_HANDLE_PADDING, whose value defaults to 0.
When nonzero, it is a count of padding handles that are inserted into
each device handles array. When gen_handles.py errors out due to lack
of room, its error message now tells the user how much to increase
CONFIG_DEVICE_HANDLE_PADDING by to work around the problem.
It looks like a real fix for this is to allocate kernel objects whose
addresses are required for hash tables in CONFIG_USERSPACE=y
configurations *before* the handle arrays. The handle arrays could
then be resized as needed in pass 2, which saves ROM by avoiding
unnecessary padding, and would avoid the need for
CONFIG_DEVICE_HANDLE_PADDING altogether.
However, this 'real fix' is not available and we are facing a deadline
to get a temporary solution in for Zephyr v2.7.0, so this is a good
enough workaround for now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit ec331c6fe2.
Although it's a valid simplification under the assumption that we're
going to be padding the array out anyway, it would use extra ROM if we
fix the build system issues that are currently forcing gen_handles.py
to introduce extra padding in the handles arrays for linker pass 2.
On the (perhaps optimistic) assumption that we're going to fix the
build system, let's get rid of a commit that would get in the way. The
extra "complexity" in device_required_handles_get() is trivial.
This gets rid of a comment describing the linker passes, but the
structure of the comment is a bit misleading (and it contains
incorrect information for the results of pass 2: the terminator at the
end is DEVICE_HANDLE_ENDS, not DEVICE_HANDLE_NULL).
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit 0c6588ff47.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit b01e41ccdd.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit 4c32e21fc7 with some
manual conflict resolution.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Support DNS-SD Service Type Enumeration in the dns_sd library
and mdns_responder sample application.
For more information, please see Section 9, "Service Type
Enumeration" in RFC 6763.
https://datatracker.ietf.org/doc/html/rfc6763Fixes#38673
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Setting of DTC_OVERLAY_FILE as an environment setting was deprecated
before Zephyr 1.14 LTS.
This commit remove the support for this possibility and thus cleans up
the build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There are two simmilar functions for unsubscribing from GATT handles.
- `gatt_sub_remove`, which is called on disconnect for every
subscription will free the `subscriptions` entry when the entry
represents no subscriptions.
- `bt_gatt_unsubscribe`, called by the application, which forgets to
free the `subscriptions` entry.
If all subscriptions grouped in a `subscriptions` entry are removed
using `bt_gatt_unsubscribe` before disconnect, there are no
subscriptions left to call `gatt_sub_remove` on. The `subscriptions`
entry is then never freed.
The above results in a resource leak of a `subscriptions` entry.
This fix makes explicit and enforces the invariant that there should not
be entries in `subscriptions` with an empty subscription list.
Fixes#38688
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add unit tests that will ensure the CTE disable operation does not
cause breaking of LLL operations by too early release of chained PDUs.
The tests verify if numbers of PDUs in free PDUs fifo and free PDUs
memory pool are correct.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When CTE is enabled for periodic advertising and number of CTE is
greater than number of PDUs in a chain, that are needed to transport
advertising data, there are additional empty PDUs used for transport
CTE.
CTE transmission may be disabled when periodic advertising event is
pending in LLL. rem_cte_info_from_per_adv_chain removed CTEInfo field
from extended advertising header in chained PDUs. When there were found
empty PDUs (created to transport CTE only), they were released from
the chain that was currently used by LLL. That caused an assert in
isr_tx handler due to broken advertising chain.
The rem_cte_info_from_per_adv_chain may not relese PDUs that are in
use by LLL. The PDUs may be released by LLL in prepare step when
advertising pdu double buffer is swapped by lll_adv_sync_data_latest-
_get.
This PR fixes that issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix asserted in ULL due to incorrect resumption of scan
window when auxiliary channel chain PDU is LLL scheduled by
a ULL scheduled auxiliary channel PDU reception.
The issue is solved by having `is_chain_sched` flag in the
auxiliary channel scan context and using the already present
`is_aux_sched` in the primary channel scan context to
differentiate if the auxiliary PDU Rx ISR is to return back
to primary channel scan window or to close the auxiliary
chain PDU reception radio event.
Relates to #38146.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to ignore aux pointer struct in scanning advertising, to
avoid ULL scheduling from setting up ticker to receive chain
PDUs while LLL is receiving scan response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instructions to use openocd on stm32u5 based platforms were missing
an instruction on the branch to use.
Also, the console excerpt were not rendering correctly, so fix
them.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use defines for scanning state types of passive, active,
initiator and synchronization state.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow resolving list update when passive scanning,
otherwise deny if advertising, active scanning, initiating
or periodic sync create is active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This reverts commit 43309296b8.
Fixes: #38403
The referred commit introduced `zephyr_library()` for pinmux drivers but
also resulting in #38403 because several boards has `CONFIG_PINMUX=y`
without selecting any pinmux drivers from `drivers/pinmux` thus
generating the following warning:
> No SOURCES given to Zephyr library: drivers__pinmux
>
> Excluding target from build.
This commit reverts the changes so that this warning disappears.
This results in pinmux drivers from `drivers/pinmux` to be located in
libzephyr.a which is messy, but has been so for a long time, even before
Zephyr 1.14 LTS.
The future pinctrl API will be designed in such a way that this problem
will not occur. Thus the old behavior is acceptable until the transition
to pinctrl API has completed.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
Removing unneeded `CONFIG_CONSOLES=y` occurrences where no console
driver is selected.
Such selection results in an empty drivers__console zephyr library,
which again results in the following warning message.
> No SOURCES given to Zephyr library: drivers__console
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
Removing unneeded `imply GPIO` and `CONFIG_GPIO=y` occurrences where no
files are added to the gpio zephyr library.
Also removed `CONFIG_GPIO=y` occurences where this is handled by
defconfigs for the soc or board.
Selection of GPIO without selecting any drivers results in the warning:
> No SOURCES given to Zephyr library: drivers__gpio
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
The two eth_native_posix.c and eth_native_posix_adapt.c are now added
to the common drivers__ethernet Zephyr library.
Instead of creating a dedicated library for just two files those files
are now added to the common ethernet library, see also #8826.
Instead, the dedicated compile definitions required for those files are
specified using COMPILE_DEFINITIONS on the source files.
This also avoids the following warning as the ethernet library is no
longer empty.
> No SOURCES given to Zephyr library: drivers__ethernet
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
No sources were ever added to the `zephyr_library()` defined in
modules/hal_nxp/usb/CMakeLists.txt, thus removing this lib to avoid
the warning:
> No SOURCES given to Zephyr library: modules__hal_nxp__usb
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
Changing Bluetooth drivers from being a menu into a menuconfig.
This aligns the Bluetooth driver configuration with other driver
configurations as well as provides a setting which identifies if
Bluetooth drivers has been enable.
This further helps to avoid empty Zephyr libraries for bluetooth
samples.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Removed the bt_conn_unref from the deferred_work function.
For ISO, the conn unref for the peripheral will happen in
the bt_iso_disconnected function. For the central, the
unref shall only happen when the CIG is terminated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix deadlock in multiple peripheral connection in a device
due to redundant double reservation of node rx buffer during
crossover scenario in Data Length Update procedure.
Data Length Update resize state was reset back to response
wait state when peripheral received an acknowledgment to
local initiated Data Length Request PDU after having already
transitioned to resize state.
Implementation is designed to transition to resize state
under both Data Length Response reception and crossover
scenario of Data Length Request reception when procedure is
local initiated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change the way the local IRKs are accessed to be consistent with the
all other uses.
Coverity thinks using the pointer to the array is suspicious in this
case.
Fixes: #38130
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Verify that the local identity loaded from the settings key is
valid for the current configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Have separate Bluetooth Device address get and read
functions, remove use of function just to return Extended
Advertising Random address and replace with simple
assignment statement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation defined channel index in the auxiliary
pointer of the common extended payload format in the primary
channel PDUs and the same be used in the transmission of
auxiliary PDUs.
Fixes#35668.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add FIXME comments for missing use of channel selection
algorithm for Periodic Advertising chained PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to set correct Advertiser's clock
accuracy value in the auxiliary pointer field in the common
extended payload format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to populate the aux, and sync offset
in the latest PDU. If both the current and latest of the
double buffer has been filled and LLL did not pick the
latest PDU, then the offset should be filled into the latest
PDU (and not into the first/current PDU).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- correct the names of buffers used by message queues so that it
is possible to have multiple instances of the driver (in case
such need appears in the future)
- make `stop` and `discard_rx` normal structure members, not bit
fields, as they are modified in the interrupt handler and that
could lead to overwriting of other bit fields located in the
same memory unit
- add a log message providing the actual frame clock (WS) frequency
(i.e. PCM rate) that the driver was able to configure (due to
hardware limitations, it is not always possible to achieve the
exact requested frequency and the driver selects the closest one
available, so make it more visible to users
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove unnecessary condition that effectively limits the usability
of the I2S format to two channels mode only.
Although the description of the `i2s_config` structure contains
a remark that for the I2S format the specified number of channels
is ignored and always two are used, in fact only one other in-tree
driver (i2s_sam_ssc) applies such limitation.
The nRF I2S hardware has no problem with handling the I2S format
with audio data for only one channel, so there is no need for having
this limitation in the driver, and without such mode of operation of
the driver it is impossible to feed it with PCM data directly from
the PDM peripheral working in one channel mode.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since the tests expects devices to change states, PM_STATE_RUNTIME_IDLE
can't be used. The first state that cares about devices is
PM_STATE_SUSPEND_TO_IDLE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to the state documentation, this state does not need to handle
devices:
> Runtime idle is a system sleep state in which all of the cores enter
deepest possible idle state and wait for interrupts, no requirements for
the devices, leaving them at the states where they are.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add networking relase notes based on commit history, for commits
including "net" phrase in the title.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds information to the kernel scheduling documentation explaining
how a thread's deadline is used to determine the thread's relative
priority.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
before running timer's timeout function, we need to make
sure that those threads waiting on this timer have been
added into the timer's wait queue, so add operations to
use timer lock to mask interrupts in z_timer_expiration_handler
function to synchronize timer's wait queue.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Fix imprecise data bus error when receiving Periodic
Advertising Report caused due to uninitialized `extra` field
member in the node rx struct passed from ULL to LL thread
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix repeated periodic sync drift compensation invoked when
receiving chain PDUs which caused memory corruptions and
bus faults.
Use `is_aux_sched` flag in Periodic Sync's LLL context to
differentiate between the first AUX_SYNC_IND PDU followed by
use of LLL scheduling to receive following AUX_CHAIN_IND PDU
versus ULL scheduling being used to receive AUX_CHAIN_IND
PDUs.
Drift compensation to be done only using the AUX_SYNC_IND
PDU and not on reception of AUX_CHAIN_IND PDU using ULL
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A few HAS_HW_NRF_* Kconfig options for peripherals available in nRF5340
are not selected. Fix it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
EAGAIN is used in some other places in the code, e.g. if node is not
provisioned when a model tries to send a message. This change helps to
differentiated if the acknowledged message timed out from other failers.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
For some reason, LSE can't be used as LPTIM clock source
on nucleo_l073rz.
As a consequence, low power operations are not functional on
this platform.
Waiting for the original issue to be fixed, set LSI as LPTIM
clock source.
Partially fixes#38930
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
- Documentation of the 0 return value for ns_write function
- Ajusted lines length limit from 80 to 100
- Fixed extra and missing parameters for nvs_fs
- Misc spelling/grammar changes
Signed-off-by: Ramiro Merello <rmerello@itba.edu.ar>
Add check that can be removed by the compiler since the rest is only
needed when multiple identities have been enabled.
Fixes: #38134
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According to `sendmsg()` man pages, the `struct msghdr` can contain
empty records (iov_len equal to 0). Ignore them in TLS `sendmsg()`
implementation to avoid unnecessary calls to mbed TLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case zsock_sendmsg did not send all of the data requested, update the
`struct msghdr` content and retry.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If data for `context_sendto()` was provided in a form of
`struct msghdr` (for instance via `sendmsg()`), it was not verified that
the provided data would actually fit into allocated net_pkt. In result,
and error could be returned in case the provided data was larger than
net_pkt allows.
Fix this, by verifying the remaining buffer length when iterating over
`struct msghdr`. Once the buffer is filled up, break the loop. In
result, functions like `sendmsg()` will return the actual length of data
sent instead of an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Setting Oversampling also applies on stm32L5 but disabling
the ADC will cause endless loop except for the stm32L0 serie.
Errata applies only on stm32G0 soc series when
writing ADC_CFGR1 register.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
For some reason, provided pin configuration for nucleo_f103rb
is not able to detect gpio callback issues.
Move to other pin combination which detect pin callback issues.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
GPIO initialization was moved to PRE_KERNEL_1 with commit
590162a5cc.
This had the consequence of having AFIO init done after GPIO init
as a consequence, this sequence ends up with AFIO clock disabled,
and hence negative impact on AFIO expected services.
Additionally, to save some flash, compile out afio init when not
required.
Fixes#38870
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move memory.h out of the way in a more "private" space
(include/linker/devicetree_reserved.h) to prevent polluting the
devicetree space.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fixes: #38924
When the `verify-toolchain.cmake` script fails, then twister will print
a standard message to the user regardless of the reason.
> E: Variable ZEPHYR_TOOLCHAIN_VARIANT is not defined
The `verify-toolchain.cmake` already prints detailed information
regarding the cause of the failure, so twister should just pass that
message as-is.
For example, the message that is provided by verify-toolchain.cmake
when Zephyr SDK 0.13.0 is installed but 0.13.1 is required looks like:
> CMake Error at cmake/verify-toolchain.cmake:75 (find_package):
> Could not find a configuration file for package "Zephyr-sdk" that is
> compatible with requested version "0.13.1".
>
> The following configuration files were considered but not accepted:
>
> /opt/zephyr-sdk-0.13.0/cmake/Zephyr-sdkConfig.cmake, version: 0.13.0
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If timeout error was occured during performing testsuite on QEMU or
other simulator (e.g. Renode), information about this error will be not
placed in final report. It can be fixed, by set status of testcases,
which were not performed due to this error as "BLOCK".
Simmilar solution is alredy used in DeviceHandler when Twister works
with real platform. So I think that it is resonable to use the same
approach, when tests are performed on simulators.
I move loop which iterate through all testcases and set their tests
status as BLOCK into the parent Handler class, because the same
activity is performed in each children class (BinaryHandler,
DeviceHandler and QEMUHandler).
Fixes#38756
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add some descriptions of hybrid scenario of ACRN hypervisor, and
completed the configurations that we are using to build ACRN. This
configuration change for ACRN hypervisor is necessary when our Zephyr
application is using over than one CPU for it.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Update the sample.yaml files for the modbus samples:
- depends_on entries should just be space separated, drop the comma
- add the platform referenced in the documentation to platform_allow
- replace the deprecated dt_compat_enabled_with_alias with
dt_enabled_alias_with_parent_compat
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This has been unreferenced since:
4ff616b647 modbus: rework interface configuration
This generates a compiler warning, but it went unnoticed because the
sample test is configured incorrectly and not running.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Log failure to register authentication handlers since returning errors
from the shell is not visible to the user.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle return value of GATT service register and unregister functions.
Log action to shell.
Fixes: #38013
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the broken logic in the kernel/thread_stack test
The modified test should do direct read & write from estimated stack
pointer to highest address in the stack buffer.
Previously this test was start from lowest address in the stack
which would trigger exception of hardware stack checking scheme
violation on ARC boards and other targets with hardware stack
overflow detection.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Finetune coap_server sample parameters for better user experience.
Reduce the maximum retransmission count to release resources earilier in
case client is unreachable and no longer responds. Increase the maximum
number of pending retransmissions, along with the heap size (the buffers
for messages are allocated on a heap), to improve sample responsiveness,
in case multiple unreplied messages are pending retransmission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case no reply is received for notification message, remove the
corresponsding observer since it's no longer reachable, freeing slot for
another one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retransmission handler only increased the retransmission count, w/o
sending the actual message again. Additionally, the next retransmission
time calculation was broken - it did not take into consideration the
time that has already passed since before retransmission, and re-applied
the entire timeout value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
binary_f16 and binary_f16.fpu test cases fail when target
SRAM size is below 140k.
Update test case requirements to set min_ram to 144.
Additionally, remove the platform_exclude hich is now useless
(frdm_kw41z ram is 128k).
Fixes#38826
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Check the return value of bt_rand when creating identities.
Failure to generate a random IRK would result in the privacy feature
being compromised.
Fixes: #38120
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix unexpected control flow in host keys module. A continue in a do
while false act the same as a break. This entire construct can be
replaced with a simple if else control flow.
Fixes: #38014
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Check len is not zero before accessing data pointer, the len variable
is not checked before this point so cannot be trusted to not be zero.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The socket API was updated with mutex protection, however this
was not reflected in the documentation. Remove the obsolete note on the
thread-safety status of the socket API, to prevent confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Ensure that length variables (len0, len1, len2) are positive
before they are used for array indexing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update sam0 i2c driver to directly send/receive next message if it is
in the same direction and the current message has no stop or restart
flags. Seems like in some drivers this is the expected behaviour.
Fixes#36857
Signed-off-by: Christoffer Zakrisson <rustypig91@gmail.com>
Fixes an issue whereby the application is configured for extended
advertising mode but advertises in legacy mode with a large device name
which should be limited to 31 bytes
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The struct was declared twice (once as an opaque type) in
iso.h, but was unneeded. Removed to avoid confusion about
whether it is an opaque type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixed discrepancy between documentation and actual returned
error code when API is not enabled or not supported by a
device. Added detection of case when device does not implement
uart_callback_set but ASYNC api is enabled. Returning -ENOSYS in
that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some details on the changes made in the device power management area
(callback simplification).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The st7789v_transmit function does not return any error code (void), so
ret = st7789v_transmit(...) is wrong.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Ignore the return value of the bt_gatt_change_aware function when the
client is reading the database hash characteristic value. This is the
point where the client becomes change-aware, so nothing else should be
done if the client is change-unaware.
Fixes: #38012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a regression introduced in b8770acc28 when
aligning with BT Core Spec 5.3 naming convention.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Updates wording in Coding Guidelines page to remove outdated timelines
and correct the criteria for each stage. Changes reflect that we are
in stage 1 and will not reach stage 2 until the CI for enforcing
coding guidelines has been established.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
The root cause of #38591 was region symbols being placed before the
section description for data region.
To support both schemes with the linker generator, a new
`SYMBOL SECTION` argument has been added to the zephyr_linker_group()
function.
This commit updates the arm/linker.cmake CMake linker file to use the
new `SYMBOL SECTION` argument for the data region group and text region
group so that those two groups now behave identical to the behavior when
using the cortex_m linker.ld template.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The root cause of #38591 was region symbols being placed before the
section description for data region.
Some region start symbols are placed before section description, other
region start symbols are placed inside the first section in the region
and thus identical to the sections own first symbol.
To support both schemes with the linker generator, a new
`SYMBOL SECTION` argument has been added to the zephyr_linker_group()
function.
The ld_script.cmake linker script generator has been updated to support
the new argument so that generated ld linker script has identical
behavior to the templated ld linker scripts.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38591, #38207, #37861
The commit 65a2de84a9 aligned the data
linker symbol for sections and regions.
The data region symbol start has been placed outside the sections thus
being defined as the address of the region before alignment of the first
section in the data region, usually the `datas` section.
The symbol defining the start address of the data section is after
section alignment.
In most cases the address of the data region start and datas section
start will be identical, but not always.
The data region symbol is a new linker symbol and existing code has
been depending on the old data section start symbol.
Thus, the update to the use of the data region start symbol instead of
data ram start symbol thus results in a different address when the
section is aligned to a different address.
To ensure the original behavior in all cases, the data region start
address is now moved inside the data section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Following the migration of the clock source configuration in DTS (commit
2691541ad2), HSI is always used as wake-up source on STM32LX. It is
reconfigured as MSI just after, but it slightly increase the wake-up
time and power consumption.
It happens as the file defining STM32_SYSCLK_SRC_MSI is not included.
Fix that.
Fixes#38807
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The interrupt config flags for an IO should be separate
from the standard IO configs because the interrupt config
is a separate API.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When CONFIG_ARM_MPU is explicitly unset in application prj.conf there
were build warnings related with implicit declarations of following
symbols: NRF_DT_GPIOS_TO_PSEL, __WFE, __SEV.
Lack of NRF_DT_GPIOS_TO_PSEL lead to build error due to undeclared
dfegpio0_gpios symbol.
The cause for the warnings and error were missing soc.h includes in
few source files. The missing includes were added in this commit.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This commit sets the minimum required Zephyr SDK version to 0.13.1,
which fixes the following critical issues:
1. Xtensa initial malloc failure (GitHub issue #38258)
2. ARMv8-M security extension vulnerability (CVE-2021-35465)
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit 9bd1483afe was added as a
workaround for the Xtensa initial malloc failure bug.
This bug has been fixed in the Zephyr SDK 0.13.1 release and therefore
this workaround is no longer needed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
k_work_schedule may return other non-negative value than 0.
When driver was adapted to the new k_work API that was not
taken into account.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The Zephyr 2.6 release notes, in the Bluetooth section, refers the user
to a commit message which had a couple of typos in it. Clarify this in
the very release notes.
Fixes#36692.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
RFC 2460 Sec. 5 requires that a ICMPv6 Time Exceeded message is sent
upon reassembly timeout, if we received the first fragment (i.e. the one
with a Fragment Offset of zero).
Implement this requirement.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The purpose of shift_packets() is to make room to insert one fragment in
the list. This is not what it does currently, potentially leading to
-ENOMEM even if there is enough free room.
To see the current behaviour, let's assume that we receive 3 fragments
in reverse order:
- Frag3(offset = 0x40, M=0)
- Frag2(offset = 0x20, M=1)
- Frag1(offset = 0x00, M=1)
After receiving Frag3 and Frag2, pkt[] will look like:
.-------.-------.-------.
| Frag2 | Frag3 | NULL |
| 0x20 | 0x40 | |
'-------'-------'-------'
pkt[0] pkt[1] pkt[2]
When receiving Frag1, shift_packets(pos = 0) is called to make some room
at position 0. It will iterate up to i = 2 where there is a free
element. The current algorithm will try to shift pkt[0] to pkt[2], which
is indeed impossible but also unnecessary. It is only required to shift
pkt[0] and pkt[1] by one element in order to free pkt[0] to insert
Frag1.
Update the algorithm in order to shift the memory only by one element.
As a result, the ENOMEM test is only simpler: as long as we encounter
one free element, we are guaranteed that we can shift by one element.
Also assign a NULL value to the newly freed element since memmove() only
copy bytes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently net_ipv6_handle_fragment_hdr() performs 2 distinct tests: it
checks the M-bit of the most recent fragment to decide if we can proceed
with the reassembly. Then it performs some sanity checks which can lead
to dropping the whole packet if not successful.
The test on the M-bit assumes that fragments arrive in order. But this
will fail if packets arrive out-of-order, since the last fragment can
arrive before some other fragments. In that case, we proceed with the
reassembly but it will fail because not all the fragments have been
received.
We need a more complete check before proceeding with the reassembly:
- We received the first fragment (offset = 0)
- All intermediate fragments are contiguous
- The More bit of the last fragment is 0
Since these conditions can also detect a malformed fragmented packet, we
can replace the existing sanity check that is performed before
reassembly. As a bonus, we can now detect and rejected overlapping
fragments, since this can have some security issues (see RFC 5722).
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently we only store the fragment offset. But in some cases it might
be necessary to also inspect the M-bit (More Fragment) of all received
fragments.
Modify the semantics of the field to store all the flags, rename the
setter to account for this change, and add a getter for the M-bit.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The special handling of the 1st fragment in unnecessary, since it will
be correctly handled even without it. Moreover it causes some corner
cases, like a single packet with a fragment header (M=0), to be
incorrectly handled since the reassembly code is skipped.
Remove the special handling of the 1st fragment to fix these problems.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently the requirement of the length being a multiple of 8 is not
tested for the first fragment, since the first fragment takes a
different path due to the goto.
Move the test earlier in the process, so that it is performed on all
fragments, including the first one.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
If we have less fragments than what can be stored in the reassembly
array, some loops will blindly dereference NULL pointers.
Add checks for NULL pointers when necessary and exit the loop.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently the stack is limited to a maximum of 2 incoming fragments per
packet. While this can be enough in most cases, it might not be enough
in other cases.
Make this value configurable at build time.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently prev_hdr_offset always equals 6, which is the offset of
the nexthdr field in the IPv6 header. This value is used to overwrite it
when removing an IPv6 Fragment header, so it will work as long as there
is no other Extension header between the IPv6 header and the Fragment
header.
However this does not work in the other cases: the nexthdr field of the
IPv6 header will be overwritten instead of the nexthdr field of the last
Extension header before the Fragment, leading to unwanted results.
Update prev_hdr_offset so that it always point to the nexthdr field of
the previous header, either the IPv6 header or an Extension header.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The current validation code waits to process the header before rejecting
it, while some checks can be already enforced when reading the nexthdr
field of the previous header.
The main problem is a wrong pointer field in the resulting ICMPv6 error
message: the pointer should have the offset of the invalid nexthdr
field, while currently it will the offset the invalid header.
To solve that problem, reorganize the loop in two parts: the first
switch validates nexthdr, while the second switch processes the current
header. This allows to reject invalid nexthdr earlier.
The check for duplicated headers is also generalized, so that we can
catch other kind of headers (like the Fragment header).
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
By definition, NET_IPV6_NEXTHDR_NONE is void. So we must stop processing
before trying to read any data, since we will start reading values that
are outside the Extension Header (likely the payload, if any).
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
When an unknown option is encountered, an ICMPv6 error message must be
sent in some cases. The message contains a pointer field, which must be
the offset to the unknown option. Currently the offset is computed from
the beginning of the option list, while it should be computed with
respect to the beginning of the IPv6 header.
Record the offset when reading the option type and pass it later to
ipv6_drop_on_unknown_option() to correctly set the pointer field. Also
rename the argument in ipv6_drop_on_unknown_option() to make the
purpose more clear.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Currently PADN data are not skipped, which results in the stack to think
that the next header starts in the middle of the padding. We have to
skip the bytes before going on.
Also clarify the PAD1 does not have any length field.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The current names are confusing. Indeed "nexthdr" if the type of the
header currently processed, while "next_nexthdr" is the nexthdr field of
the current header.
Rename them to improve readability and make it less error-prone.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
ICMPv6 error messages are not sent (on native_posix) because the first
net_pkt_write() returns an error.
pkt has just been allocated using net_pkt_alloc_with_buffer(). Trying to
write an empty packet in overwrite mode will result in an error. There
is no need to be in overwrite mode, since we want to write the LL
src/dst addresses at the beginning.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
There is a copy-paste error in this sample code that results
in a function for input events being called for an output pin.
By chance, this has no influence on the behavior of the sample,
as the function returns a register offset that for events and
tasks is the same for a given channel, but obviously the code
is confusing.
This is fixed by replacing the relevant part with more suitable
function calls, to also simplify the code a little.
On the occasion, also a remark is added about no button debouncing
used in the sample, to prevent users from being surprised by its
possible behavior.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Similarly to what was done on stm32g0, disable DBGMCU clock
after operation to avoid conflict with openocd.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If clock is not enabled write access on that registers are no-op.
Disable clock after operation to avoid conflicts with openocd which
can also access this clock when flashing.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable CONFIG_DEBUG when test is run in CI.
This will allow DGB access in stop modes (and specially flashing)
and avoid potential issues when test in run in a test suite.
Note that on some targets (stm32wb for instance) openocd is able
to do the same operation, and which allows to reflash the target
even if switch was not enabled, but this could not be the case
on all targets.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adding missing parenthesis. Without them wrong results
appeared when k_cycle_get_32 wrapped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes: #38463
With 6be1b2af9b then Zephyr shields and
soc Kconfig are always sourced from Kconfig directly.
However, check_compliance.py generates Kconfig files for sourcing the
same files thus sourcing the same files twice.
The end result is a lot of Kconfig warnings as described in #38463.
Removing the generated Kconfig files as this is no longer needed after
6be1b2af9b has been introduced.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38761
The introduction of zephyr_library_property in #38347 contained a
stray function call `target_compile_definitions()` resulting in the
library property name and value to also be added compile definitions to
the Zephyr library.
The Zephyr library property is an internal property and is not supposed
to be added as compile definitions, and thus this call is removed with
this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support for Quectel modem in gsm_ppp modem driver.
The CMUX cmd is based on MUX application notes v1.0(2020-09-22)
for BG95, BG77 and BG600L. Tested and working on EC21e.
As the gsm_ppp doesn't do power control, it is required to power
on the modem manually in the application.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Apply the same changes as the previous commit made in the spi_nrfx_spim
shim, to keep these two shims aligned.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to the nRF5340 PS, for 32 Mbps high-speed SPI using SPIM4,
drive configuration H0H1 must be used. The underlying nrfx_spim driver
does it properly in its initialization function, so change the shim to
(re)initialize the driver when the SPI configuration is to be changed
(only then the speed to use is known), to avoid the need of duplicating
the corresponding code in the shim itself.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to the nRF5340 PS, SPIM4 only supports 32 Mbps when
the application core is running at 128 MHz. This patch adds
the corresponding check.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The board name used in the zephyr-app-commands directive was the old
name for the Thingy52 board.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF battery sample claims that it works without the need of a vbatt
node (voltage divider). However, this was currently not possible because
the sample code did have no means to extract the necessary ADC details
(instance and channel) from Devicetree unless vbatt was present. Similar
to other ADC samples, the zephyr,user node is used to define io-channels
property in this case. The sample README has been updated with an
example of how measurement without a voltage divider can be achieved.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
GDB can be built with or without Python support. When built with Python
support this can cause a particular problem: The gdb executable relies
on shared libraries that are bound to a specific Python version. But
since most Linux distributions typically ship with a single version, it
is very difficult to choose which one to target when building GDB.
When GDB executes, if it fails to load the shared libraries it will exit
immediately with an error code of 127 and output resembling this:
/home/carles/bin/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gdb:
error while loading shared libraries: libpython3.8.so.1.0: cannot open
shared object file: No such file or directory
There are two known approaches to shipping multiple gdb executables:
- The Zephyr SDK ships a default gdb with Python enabled, and then a
separate gdb-no-py executable with Python disabled
- GNU Arm Embedded ships with a default gdb with Python disabled, and an
additional gdb-py with Python enabled
To mitigate the problem of not being able to debug, fall back to a
'gdb-no-py' if it exists whenever the standard gdb executable fails to
even run.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Refactor IPv4 multicast address to MAC multicast address conversion
into its own function, so it can be reused by drivers as it is already
possible for IPv6 multicast addresses.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
This patch fixes the issue that can cause a deadlock in shell.
When two threads simultaneously poll the TXDONE signal, only one
of them will receive it, leaving second one stalled.
The problem was that shell's context contains k_poll_event objects that
were polled by multiple threads. Polling it overwrites the poller field
that was set by previous thread.
Instead, the k_poll_event object must be created on the stack by every
thread that wants to poll the TXDONE signal.
This makes sure that no thread will be left waiting for this signal
forever.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
ptp_clock_test was failing when trying to access the ptp clock from user
mode. This was due to an arbitrary initialization priority between the
virtual PTP clock devices created by the ptp clocking test and the
physical PTP clock on the frdm_k64f board. Since the ptp test
initializes the virtual clock with the same device name as the physical
clock, if the physical clock was initialized first this test would
incorrectly reference the physical device during testing, instead of the
virtual one.
This fix simply defines the virtual ptp clock with a custom name, so
that the test will always locate the correct ptp clock.
Fixes#38731
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Ensure the GPRS connection APN settings match the PDP
context. This it best to ensure proper IP connectivity.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Ensure that the IP family is synchronized between the PDP
context and the GPRS connection.
There were cases where they could get out of sync.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Assign the IPv6 address from the LTE network to the
network iface.
Configure DNS resolver with IPv6 DNS address from the
LTE network.
Fix socket AT commands to account for IPv6 addresses.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
In the DNS work callback ensure the iface is up
(on the LTE network) before trying to reconfigure the
DNS resolver with the DNS address.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When falling back to L2CAP for connection parameter updates, the
interval min and maxes should also be saved.
Fixes#38613.
Signed-off-by: Eric Johnson <eric@liveathos.com>
The stm32wl version of the sx126x driver disables the NVIC interrupt in
the radio isr to prevent retriggering while the event gets handled in
the workqueue. Since the interrupt condition is still present while the
line is disabled, the interrupt pending bit remains set in the NVIC, so
after the handler finished, when irq_enable() gets called, the interrupt
fires immediately again with no status bit set in the radio registers.
Apart from the no-op interrupt, this has the side effect of bringing
the radio out of sleep as soon as the interrupt bit are read and
cleared, which increases the idle state power consumption.
Adding a NVIC_ClearPendingIRQ() before irq_enable() seems to fix the
problem. It should not cause any issue with missing interrupt events, as
if there are pending bit on the Radio, the NVIC pending bit would be
re-set immediately.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
1. Add support for multiple syscon entries (as a side effect, this also
fixed syscon.c implementations which weren't being linked to their
syscon.h counterparts).
2. Add support for different width registers in syscon.
3. Add tests for syscon
Signed-off-by: Yuval Peress <peress@chromium.org>
Since version 1.11.0, Full stack M0 binary requires 216K of flash
being available, while previously 212K were required.
Review flash partitioning to take it into account.
Additionally:
- update value in board yaml file.
- align value in package .dtsi file
Fixes#38735
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes: #38558
This commit removes: `cmake_policy(SET CMP0079 OLD)`
This means Zephyr will now allow the new CMP0079 behavior introduced
with CMake version 3.13.
Code has now been examined and no occurences has been found where the
INTERFACE keyword was used with `target_link_libraries()` outside the
CMakeLists.txt scope where the original libraries were created.
As an additional safeguard `./scripts/twister -c -N --cmake-only`
has been executed before and after this change and all `build.ninja`
files for each test / sample have been diffed.
Removing the CMP0079 policy creates identical build files, hence removal
of the old policy will not impact the build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
bsim test build system hides compile warnings.
This commit adds extra cc flags to prevent this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Currently we are using mxcsr register with the bit 6 DAZ enabled.
When the denormals-are-zeros flag is set, the processor
converts all denormal source operands to a zero with the sign
of the original operand before performing any computations on them.
It causes bugs in the SIMD XMM registers computation like #38646
I suggest to disable Denormals-Are-Zeros flag and mask division-by-zero
exception.
Set value to the default 1F80H according to the Intel(R) 64 and IA-32
Architectures Software Developer's Manual.
Fix will let all x86 boards perform SIMD computation using XMM
registers in the correct way.
Fixes#38646
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
When the sof module code was build, it was found that
PI was not defined in the minimal library.
Here are some mathematical constant definitions to avoid build errors.
Signed-off-by: Yang XiaoHua <yangxiaohuamail@gmail.com>
These are the only two display drivers initializing in APPLICATION.
Dependency exposed with LVGL with initialization at same level and
priority.
Fixes#38690
Signed-off-by: David Leach <david.leach@nxp.com>
When using the IEEE802154 radio interface in CONFIG_IEEE802154_RAW_MODE,
there is no way to handle ack frames because of the dummy implementation
of ieee802154_radio_handle_ack() in the ieee802154_radio header file.
Removed the dummy implementation from the header so you can/need to
implement it in the application.
samples: added implementation of ieee802154_radio_handle_ack() to
wpan_serial and wpanusb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
The NPCX I2C implementation contains two modules, an I2C port and an
I2C controller. Disable the I2C controller nodes by default and require
the user to enable both the I2C port and controller in the devicetree.
Signed-off-by: Keith Short <keithshort@google.com>
Now that SDK 0.13.1 is released bump buildkite & github workflows
to use this SDK version and the docker image that has it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When calling ull_conn_iso_cis_stop with no pending LLL events,
cis_disabled_cb may be called recursively if more than one CIS is
associated with a disconnecting ACL connection.
To prevent ticker_stop being called more than once, it shall be
registered at entry of cis_disabled_cb whether this is the last CIS.
Only then shall ticker_stop be called.
Signed-off-by: Morten Priess <mtpr@oticon.com>
CIS LLL events pending was checked incorrectly using a
mayfly incorrect set to be called from ULL LOW context,
but the actual call was from ULL HIGH context.
Beside this, the code was refactored to have file static
functions after global scope functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a typo bug where sercom5 pinctrl has pad2 and pad3
has duplicated pads for pb0/pb2 and pb1/pb3.
Per the datasheet, pb2 and pb3 should be pad0 and pad1 respectively.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
The TensorFlow Lite module makes use of the features provided by the
standard C++ library (e.g. `#include <functional>`), so the standard
C++ library config must be enabled for it.
This used to work without `CONFIG_LIB_CPLUSPLUS=y` due to the bug
described in the issue #36644.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `nostdincxx` C++ compiler property for GCC, which
is specified when the C++ standard library (`CONFIG_LIB_CPLUSPLUS`) is
disabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new C++ compiler property `nostdincxx` which
specifies the C++ compiler flag for excluding the C++ standard library
include directory from the include paths.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When CONFIG_PM_DEVICE_RUNTIME is enabled, if a pin is configure as
input after an output pin has already being configured the device is
wrongly suspended.
Fixes#38433
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that we're clearer around pm constraints management in various
TX cases (poll streams, irq driven or async), make some code
simplifications to ease readability.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Introduce new logic to set/release pm_constraint during serial TX
transactions.
First change is to introduce an internal flag and utility functions
to control the set/release constraint balancing per uart device.
This way, whatever the mix of transactions or API calls, we
ensure a single uart device can only do 1 or 0 to the PM state
constraint. Constraint can't then be set more than once, released w/o
having been set or released more than it was set.
The last part of the change reworks the triggers for constraints
set/release operations.
In order not to disturb driver operations, if irq driven mode or PM is
enabled, don't enable TC interrupt handling by default.
Instead, map the pm_constraint setting to the way TC flag is handled
in normal mode of operations (irq driven or async).
As a consequence, in irq driven mode, pm_constraint is set/released on
tx_enable/tx_disable api calls, which gives API user full control
on transaction protection vs low power operations.
Finally, we emulate the same behavior on TX poll transaction, by
enabling TC irq at the start of a stream and disabling TC irq once
stream is completed. This is controlled with a dedicated device flag.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
During review of #38681, switching from HAL to LL,
involuntarily enable DBGMCU clock instead of DMA clock.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
In case LwM2M server or bootstrap server rejected
Registration/Registration Update/Deregsitration attempt, there were no
reasonable notification to the application. Fix this by reporting
LWM2M_RD_CLIENT_EVENT_*_FAILURE in such case.
Addtitionaly, remove pointless ENGINE_DEREGISTER_FAILED event, which
have no use in the state machine.
Finally, simplify the response code logging to prevent code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TWIM peripherals cannot perform write transactions from buffers
located in flash. The content of such buffers needs to be copied
to RAM before the actual transfer can be requested.
This commits adds a new property (zephyr,flash-buf-max-size) that
informs the driver how much space in RAM needs to be reserved for
such copying and adds proper handling of buffers located in flash.
This fixes an issue that caused that e.g. the DPS310 sensor driver
did not work on nRF SoCs that only have TWIM, not TWI peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Issue an error logging message when the i2c_nrfx_twim driver lacks
a concatenation buffer big enough to properly handle a call to
i2c_burst_write() function, to give the user a hint what is wrong.
Also use by default a 16-bytes long concatenation buffer for every
instance of the i2c_nrfx_twim driver. Such value should cover most
of the simple uses of the i2c_burst_write() function, like those
in the stmemsc sensor drivers, and when a longer buffer is needed,
the user will be provided with the above message pointing to the
property that should be adjusted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace the old master and slave prefixes with the new central and
peripehral ones from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the documentation for the Renesas H3ULCB board.
It document features that have been merged
during v2.7 windows and before.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
On some STM32 boards, for unclear reason,
RTT feature is working with realtime update only when
* one of the DMA is clocked
and sometimes also
* one of the DBGMCU bit STOP/STANDBY/SLEEP is set
Fixes#34324
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
It happens that CM7 wakeups CM4, before CM4 goes to sleep.
Thus when CM4 goes to sleep,
there no more wakeup from CM7. And CM4 hangs.
For a simple synchronisation implementation,
CM4 doesn't go to sleep any more,
instead it waits (active wait) for CM7 to take HSEM
(meaning that clock configuration is finished).
Fixes#38069
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
On STM32L0, there are some hardfault when DBGMCU bit Sleep, Stop
or Standby are enabled. See #37119
For unclear reason, enabling DMA clock fixes this issue.
(similarly than #38561, DMA clock comes with DBGMCU bits)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
If CYC_PER_TICK does not divide the (now - last_count) quantity exactly with integer math, the subsequent multiplication before incrementing last_count causes a drift. This commit eliminates the redundant division-followed-by-multiplication and fixes https://github.com/zephyrproject-rtos/zephyr/issues/37852
Signed-off-by: Berend Ozceri <berend@recogni.com>
This test makes use of dynamic RAM allocation done on the leftover
SRAM. Similarly to test/posix/eventfd, limit this test execution on
platforms with at least 32K of RAM available.
Fixes#38601
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
C implicit promotion rules will want to make floats into doubles very
easily. Zephyr build will generate warnings when this flag,
`-Wdouble-promotion`, is enabled with GCC
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
In k_mem_paging_eviction_select(), the returned dirty bit value
may not be actually associated with the page selected, but
rather the last page examined. So fix this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit updates the Zephyr build system such that it does not
include the `zephyr_stdint.h`, which tries to define Zephyr's own type
system, when compiling for the native POSIX architecture.
The native POSIX architecture compiles with the host toolchain and
headers, and there can be conflicts if we arbitrarily define our own
type system (e.g. mismatch between the types and the specifiers defined
in `inttypes.h`).
Note that this is not meant to be a permanent fix; instead, it is meant
to serve as a temporary workaround until we no longer need to define
our own type system.
For more details, refer to the issue #37718.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth shell implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid hitting the following violation:
Violation to rule 5.7 (Tag name should be unique)
Replace the use of "shell" in the shell as an instance of a pointer to
const struct shell.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix power-save-mode (PSM) operation.
When in PSM, do not bring the networking interface down
when an out-of-coverage event occurs.
When PSM goes into hibernate, this will cause an
out-of-coverage event to occur, even though the device
still has access to service.
Keeping the networking interface in the up state
allows an app to send data whenever it needs to.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Remove the HL7800 DTR device tree binding because the
DTR IO is not needed for operation of the HL7800
modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using DTR to control sleep modes is a legacy mode
of operation. Remove control of DTR IO.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Sleep mode 0 (driven by DTR) is only recommended for use
as a legacy option.
Sleep mode 1 is recommend by Sierra Wireless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
From 2.4 to 2.7 the net samples pair echo-server/client increase the
SRAM requirements. This adjusts example features to free necessary SRAM
to run example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The Counter resource in the IPSO Push Button object was incremented
silently by the post write handler of the State resource. This prevented
the resource from being marked as updated, effectively preventing
the engine from sending notifications to observers.
Fix this, by setting the new counter value with `lwm2m_engine_set_u64()`
instead. This will update the resource value, and trigger the engine to
send notifications if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit corrects the DMA channels for the asynchronous
UART API testing support on the SAM R21 Xplained Pro board.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
uart_sam0_dma_tx_done callback triggers when the last byte
is transferred from the tx sram buffer to the sercom DATA register.
However the byte has yet to be transmitted completely which can lead to
incorrect event handling if UART_TX_DONE is expected to signal
the end of transmission.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Fixes a compile error for the err_check function not being found if
if CONFIG_UART_INTERRUPT_DRIVEN is not enabled.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
fixes peripheral drivers such as async uart that rely on dma being
ready failing because dma is not initialized yet.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Includes support for USB, CAN, ADC, DAC, and Arduino GPIO Map.
Future could support: ETM Trace (if Zephyr supports it), QSPI, FMC, DCMI
Initially based on closest BSP for the same SoC: nucleo_f446re
Extra peripherals added based on closest BSP for nucleo-144 board:
nucleo_f429zi
Checked against nucleo-144 schematic
Documentation updated as best as I could
Arduino compatible pinmux for SPI, UART and I2C via Zio header
Tested:
USB Device mode (samples/subsys/usb/console)
Console via ST-link usart3 (samples/hello_world)
user LEDs (samples/basic/blinky)
scripts/twister --device-tests -p nucleo_f446ze
Not tested but should work: SPI, I2C, CAN, ADC, DAC
Not working yet: Quad-SPI (missing in dts/arm/st/f4/stm32f4.dtsi)
Co-authored-by: Alexandre Bourdiol
<50730894+ABOSTM@users.noreply.github.com>
Signed-off-by: Tom Owen <tom.owen@zepler.net>
This patch fixes wrong PLIC irq number of UART and SPI for SiFive
FU740 on HiFive Unmatched. Use samples/subsys/console/echo for
testing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to set/reset the oversampler (OVSE bit)
and set the Oversampling ratio (OVSR bits) in the ADC_CFGR2 register
only when ADC is disabled or enabled without conversion on going.
Then is the ADC re-enabled.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to write the Data resolution (RES bits)
in the ADC_CFGR1 register only when ADC is disabled (ADEN=0).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adding test for features that are now available on h3ulcb.
We are ignoring isotp tests because of the internal loopback
implementation of the R-Car CAN controller which is sending
Rx isr before sending the Tx isr, totally confusing the Zephyr
ISOTP state machine and causing false positive.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add an array similar to the bt_conn (ACL/L2CAP)
tx sent callback, and initialize it.
This increases the number of bt_conn_tx available
such that ISO does not take any of "L2CAP's" buffers,
but also ensures that the sent callback is called
for a broadcast iso only build.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the file variable val is not initialized,
causing the variable stack_ptr, pos, points to uninitialized data.
Initialize the variable val according to the code and commits.
Fixes#37916
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
A bug fix release with many zephyr with the most significant being a
workaround for the RTT issue we had in the previous release, fixing
the locking problem which could
result in garbled data when using high frequency processors.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
AMP functionality was removed from the v5.3 specification. Remove
AMP-related macros since they no longer map to anything in the spec
itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the definiion of Common Extended Payload Format data
field in the PDU definitions to be zero-length array,
because PDU size are configurable and to avoid allocations
being made using these PDU structs.
Corrected the extended scan response length check code to
use the correct define instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising stop on duration by using the
ticks_drift which now includes the random delay and any
ticker rescheduling of advertising radio events due to
collision with other radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The ticker `ticks_drift` is propagated via the ticker
elapsed callback, in order to provide necessary information
to correctly calculate total elapsed durations by states and
roles that use ticker extensions to mitigate scheduling
collisions by drifting within a permitted window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The function usdhc_board_access_init was returning a non-zero
value as the variable "ret" is also used to store the GPIO
level for card-detect.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
HTTP_DATA_FINAL was incorrectly notified in case Content Length field
was present in the HTTP respone - in such case it was set for every
response fragment, not only the last one.
Fix this by relying on `message_complete` flag instead of
`http_should_keep_alive()` function to determine whether to notify
HTTP_DATA_FINAL or not. As the HTTP parser calls the
`on_message_complete()` callback in either case (response is chunked or
not), this seems to be a more reasonable apporach to determine whether
the fragment is final or not.
Additinally, instead of calling response callback for
`on_body`/`on_message_complete` separately, call it directly from
`http_wait_data()` function, after the parsing round. This fixes the
case when headers were not reported correctly when the provided buffer
was smaller than the total headers length, resulting in corrupted data
being reported to the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Tests are reported as skipped if they are only being built. Fix this by
checking for the correct status.
Fixes#37475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit mainly aims to fix the blinky example path and also brings
minor improvements in other areas like adding example path for Linux so
that new users will know exactly what or where to look for.
Signed-off-by: Dhruva Gole <goledhruva@gmail.com>
The net_core device initialization has a subtle dependency
on the PTP clock initialization. Adding a Kconfig and set
it to a priority level less than net_core. This will ensure
the initialization sequence.
Fixes#38571
Signed-off-by: David Leach <david.leach@nxp.com>
The helper function to conver 32-bit binary float value to
float32_value_t incorrectly identified the "hidden" bit, resulting in
invalid conversion when TLV encoding was used to write a resource
(the output value was divided by 2).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There were several issues preventing JSON format writes to work
correctly:
1. The formatter wrongly assumed that Base Name and Relative Name values
read from the message are NULL terminated, which in result could give
invalid results when combining them.
2. The formatter wrongly assumed that Relative Name is always present,
which is not always the case. In result, it failed to parse messages,
which contained full path in their Base Name Field
3. There were no boundaries check when reading JSON variable name/value,
which could lead to buffer overflow in case malformed data was
received.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Just like plain text, JSON parser ignored leading zeros after decimal
point, giving invalid results. Fix this in a similar way as for the
plain text.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Floating point parser for plain text format was parsing floats wrongly,
ignoring leading zeros after decimal points.
Fix this, by reusing atof32() function, already avaialbe in a different
part of the engine, which did the parsing correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to the specificaion, resources are not predefined to use 32 or
64 bit floating point numbers, but should rather accept any of them (as
indicated by the size of the TLV in the message). This lead to issues
for instance with Eclipse Leshan LWM2M server, where Leshan sent 64-bit
value, while Zephyr expected 32-bit, making it impossible to write
the resource.
Therefore, unify the float usage to 32-bit float representation and fix
the TLV parsing functions, to accept values sent as either 32 or 64 bit
float.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `poll()` function did not report POLLHUP if the peer ended the DTLS
session, making it impossible to detect such event on the application
side.
On the other hand, TLS erroneusely reported POLLHUP along with each
POLLIN event, as the 0 returned by the `recv()` socket call was
wrongly interpreted (it was expected to get 0 in return as 0 bytes were
requested).
Fix this by introducing a helper function to process the mbedtls context
and verify if new application data is pendingi or session has ended.
Use this new function in the poll handler, instead of a socket `recv()`
call, to remove any ambiguity in the usage, for both TLS and DTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Notify the application when DTLS client session ends by returning
ENOTCONN on such event. Additionally, reset the mbed TLS session
structures, allowing to reinstante the session on the next send() call.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ECONNABORTED was returned in case tls_mbedtls_reset() function for
resetting session failed, which can be caused by memory shortage. Return
ENOMEM instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
MCUboot fork was updated in order to bring bugfixes from its
upstream:
- introduce MCUBOOT_CPU_IDLE() for support low power single thread
(fixes single thread power consumption)
- Allow not working secondary image device and boot form primary
device if image available
- fixes memory alignment of the RAM buffer that is used to temporarily
store data during swap.
- update devicetree py package lib files include path in assembly
- serial recovery: cbor_encoder: fix str encoding macros
- zephyr: Kconfig: fix board references
- do not set defaults for LOG_IMMEDIATE Kconfig
- boot: Do not use `irq_lock()` if using arm cleanup
- Kconfig: fix deadlock on cryptolib selectors
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fix Periodic Advertising Sync Establishment to accept
synchronization establishment to device listed in the
Periodic Advertisers List when filter policy was used.
Fixes#38520.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The IMXRT685 evaluation board uses a PMIC to reduce the signalling
voltage for a connected SD card to 1.8V, which Zephyr does not currently
support. This results in Zephyr failing to interface with any SD card
that supports 1.8V signalling when run on the RT685 eval board. This
commit disables support for 1.8V signalling for the RT685.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Snprintf calls should be avoid when not necessary, instead snprintk
should be used as it offers the same functionnalities at a lower cost
in flash.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
there is a memory hole from address 0x10000000-0x12150fff
in the ram on up_squared, we don't have access to read/write
this range, so limit the memory range below 0x10000000.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Fix incorrect calculation of received common extended header
length. Due to this a zero length advertising data is
reported in Extended Advertising and Periodic Advertising
report as one byte AD data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The sample from samples/drivers/misc/ft800/ causes twister to
timeout as it has no pass conditions defiend nor producess any
output that can be verified. What is more, it requires a shield
which is not reflected in the sample.yaml. This fix sets test harness
to display and adds an entry for the required fixture.
Fixes: #38536
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add #defines for the maximum and minimum allowed values for object
IDs.
Moves the #define for the directory listing object ID to the public
header file
Having these limits available is useful for applications wanting to
ensure they pass in (or handle) valid object ID values.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Object IDs are 48 bits, but are often carried in uint64_t variables.
This commit defines a mask value that retains the least significant 48
bits.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds FMAC HAL and LL drivers to the Kconfig system
Required to enable Filter Math Accelerator (FMAC)
on STM32G4/H7 devices
Signed-off-by: Tom Owen <tom.owen@zepler.net>
Zephyr SDK now features an openocd version compatible
with stm32g0 targets.
Set openocd as the default zephyr runner for this target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Zephyr SDK now features an openocd version compatible
with stm32g4 targets.
Set openocd as the default zephyr runner for this target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For some unknown reasons, using the new modified HPET timer would
render shell unresponsive under QEMU. So for now, disable QEMU
icount when shell is enabled.
Fixes#37672
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the NXP HAL to bring in fix for the FlexCAN driver on the NXP
Kinetis MKE1xF.
Fixes: #38442
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add a warning if the image is unconfirmed. Add a delay before rebooting
so that the user knows what happened.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The current HAWKBIT_PROBE & HAWKBIT_PROBE_DEPLOYMENT_BASE response
handlers aren't able to handle multipacket response from Hawkbit
server. This commit fixes it by using the implementation from
HAWKBIT_DOWNLOAD.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
Twister was failing for samples/drivers/audio/dmic with timeout
because there were no pass conditions defined. This patch sets
harness to console and adds regex entries to be checked.
Fixes: #38532
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Call __reset instead of directly calling __initialize from the common
RISC-V privileged SoC vectors __start. This allows injection of SoC
specific reset code just after setting up the machine trap vector.
RISC-V privilege SoCs without the need for custom reset code can set
CONFIG_INCLUDE_RESET_VECTOR=y to include a __reset stub which simply
calls __initialize.
Fixes: #38396
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
net_packet_socket_input() was changed to hardcode the return of
NET_CONTINUE and that caused a segmentation fault/crash in
net_core/process_data(), in cases when pkt was unreferred and
NET_OK was returned from net_conn_input()
This happened with socket combo of: AF_PACKET+SOCK_RAW+IPPROTO_RAW.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
CONFIG_PM_DEVICE was a de-facto requirement when enabling CONFIG_PM=y
since some device, i.e. UART, used the PM device hooks to block
suspension process while the device was busy finishing transmission.
This has now been fixed using constraints, so CONFIG_PM=y can be enabled
without further requirements.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extracted new Kconfig file for the Extended Advertising
and for the Bluetooth Isochronous Channel from the
Bluetooth subsystem Kconfig.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The BAS serivce Kconfig uses now a log template instead of
defining logger configuration itself.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The nbr_lock var actually depends on CONFIG_NET_IPV6_NBR_CACHE
(not CONFIG_NET_IPV6_ND), so move its initialization call.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
If one of AUX_CHAIN_IND is not received properly we need to send an
extra report over HCI to indicate that data are incomplete.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
According to reference manual, use of TC is "to avoid corrupting the
last transmission when the USART is disabled or enters Halt mode.". It
is safe to remove it since it is not checked when CONFIG_PM=n.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In the current implementation the STM32 UART driver required to enable
`CONFIG_PM_DEVICE` when `CONFIG_PM=y` to function properly. The main
reason is that in some situations, like in polling mode, transmissions
are not fully synchronous. That is, a byte is pushed to the _queue_ if
it is empty and then the function returns without waiting for it to be
transmitted to the wire. This makes sense to make things like per-byte
transmission efficient. However, this introduces a problem: the system
may reach idle state, and so enter low power modes before the UART has
actually finished the last data in the queue. If this happens,
communications can be interrupted or garbage data may be put into the
UART line.
The proposed solution in this patch uses PM constraints to solve this
problem. For the IRQ/DMA case it is easy since we can set the constraint
before transmission start, and when the completion (TC) interrupt is
received we can clear it. However, the polling mode did not have the
capability to signal the completion. For this case, a simpler IRQ
routine is provided to just release the constraint. As a result, the PM
hooks are not required and so system can operate with just `CONFIG_PM`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
BT_SECURITY_LOW and etc. were previously renamed and are no longer
valid.
The original rename is in the following commits:
1c48757d94 (New names, deprecate old)
5f2a9ba8e4 (Remove deprecated names)
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemiconductor.no>
Since commit 718c77a4cd ("dts: arm: stm32f0 soc serie has dma of type
V2bis"), the DMA DT cell of STM32F0 MCU has been fixed. It now has three
elements instead of five previously.
This patch fixes the dma property used in nucleo_f070rb.overlay
accordingly.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Moves the Ethernet PHY reset routine on mimxrt1xxx_evk boards to execute
in the POST_KERNEL initialization level rather than the PRE_KERNEL_2
level because it relies on a kernel service, k_busy_wait(). Leverages
the existing CONFIG_PHY_INIT_PRIORITY to allow users to configure when
within the POST_KERNEL level this routine occurs, which by default is
set correctly to the following order:
Init Function Init Level Priority
--------------------------------------------------------------------------------------
sys_clock_driver_init PRE_KERNEL_2 CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
mcux_igpio_##n##_init POST_KERNEL CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
mimxrt1064_evk_phy_reset POST_KERNEL CONFIG_PHY_INIT_PRIORITY=70
eth_init POST_KERNEL CONFIG_ETH_INIT_PRIORITY=80
net_init POST_KERNEL CONFIG_NET_INIT_PRIO=90
This fixes an issue that was introduced in commit
f0b3146ff5, which caused the system timer
to be initialized after the Ethernet PHY reset. As a result, the
k_busy_wait() never returned and the kernel never finished booting. The
serial driver never initialized and there was no output on the console,
not even a boot banner.
Tested on the mimxrt1064_evk board with samples/net/dhcpv4_client.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Do not set DLAB bit in Line Control Register when the access to
the baud rate divisor registers is not needed.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
TI Hal has its own constraint API that is used by its drivers. These
constraints need to be correlated with Zephyr constraints to be
constraints set in the HAL be visible on Zephyr and vice-versa.
Fixes#38362
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Implement constraint API as weak symbols so applications or platform
can override them. Constraints are a high-level abstraction to inhibit
the power subsystem of using certain power states. Some platforms can
have their own way to set/release constraints in their drivers that
are not part of Zephyr's code base.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
z_pm_save_idle_exit() is only declared if CONFIG_PM is enabled but
unconditionally defined. Just move it around in the header to always
be declared.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Create stubs for when the subsystem is not compiled. Some drivers need
to use constraints when are in the middle of a transaction to avoid
the system to sleep. As the same driver may be used in a target that
does not support power management, they have to conditionally (#if
CONFIG_PM) call these functions, these stubs avoid this regular problem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The priority of the LPTim interrupt on each stm32 soc
is put at the same level as the SysTick. This priority
level is given by the system Handler priority reg
(SHPR3) when the PM is not configured.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixes: #37637
toolchain_parse_make_rule() parses depfiles and converted `\\` to the
CMake list separator `;`.
However, gcc -M might create depfiles with windows path separator `\`
causing this conversion to fail, as a path like:
c:\...\zephyr\samples\drivers\led_ws2812\nrf52-bindings.h
resulting in a file list as:
c:;...;zephyr;samples;drivers;led_ws2812;nrf52-bindings.h
which results in a CMake configure dependency to be added to `C:`.
As C: is always newer than the build.ninja file, this resulted in
continues CMake re-invocation.
As a small side-note, the `\` in file name did only occur in situations
where a relative past had been used elsewhere in the build system, such
as here:
https://github.com/zephyrproject-rtos/zephyr/blob/\
c3050a5aab1e86d02642eb4c6a027419e6a3a096/samples/drivers/led_ws2812/\
boards/nrf52dk_nrf52832.overlay#L9
To ensure proper handling of files, then all files are converted to
CMake paths, that is with forward slashes: `/`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit removes the `z_` prefix from the stdio syscall functions
(`z_zephyr_write_stdout` and `z_zephyr_read_stdin`) since it is
redundant and does not align with the convention used by the equivalent
minimal libc syscall functions (e.g. `zephyr_fputc` and
`zephyr_fwrite`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The newlib `write()` and `read()` functions must call the
`z_zephyr_write_stdout()` and `z_zephyr_read_stdin()` syscall functions
in order to function properly in a user mode context.
The existing incorrect implementation was copied off the newlib hooks
implementation, which was corrected in the previous commit.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit 4344e27c26 changed the syscall
function invocation in the `write()` and `read()` functions to the
direct syscall implementation function invocation by mistake.
The newlib `write()` and `read()` functions must call the
`z_zephyr_write_stdout()` and `z_zephyr_read_stdin()` syscall functions
in order to function properly in a user mode context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This patch is testing the test_sleep_abs with a longer
real time slot value. The reason is that for platforms
like stm32wb55rg with PM, the real time slot must be adjusted
because of the LPTIM ticker.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In the case of native_posix (and other "host" toolchain based
platforms) Twister shouldn't filter tests by ZEPHYR_TOOLCHAIN_VARIANT.
The PR replaces `- zephyr` with `- host` in native_posix(_64).yaml
and modify the filter in twisterlib.py to not block building
if "host" is under the platform supported toolchains.
Fixes: #38418
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add CONFIG_XTENSA_SMALL_VECTOR_TABLE_ENTRY
for NXP_ADSP_IMX8 board to bypass the size
constraint of the interrupt vector table entry.
Fixes#38216
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
For some platforms, like NXP's IMX8 or Mediatek's MT8195,
the size of an interrupt vector table entry is 0x1C bytes,
less than usual (0x30 for Intel's platforms).
So, the interrupt handlers don't fit in the vector table
entries.
I've added a small indirection to bypass this size
constraint and moved the default handlers to the end
of vector table, renaming them to
_Level\LVL\()VectorHelper.
For this, I've added a generic configuration -
XTENSA_SMALL_VECTOR_TABLE_ENTRY.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
When CONFIG_USERSPACE is turned off, the POOL_SECTION will be located in
.data section. This will increase the target binary size. Since the
memory pool is for malloc() use and it doesn't need for initial values,
locate it in the .bss section to reduce binary size.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: Iee52ac06a48414c083518c79775fe31334eab674
Since it's not possible to encode full range of 64-bit unsigned integer,
remove this type from the LwM2M implementation, and replace its uses
with 64-bit signed integer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the resource values represented by the unsigned integers were casted
to integers of a corresponding size in the read handler, they were not
ecoded properly if the unsigned value was larger than the maximum
integer value of the corresponding size (i.e. they were encoded as
negative values).
Fix this by casting the unsinged value to a wider integer type, to
prevent incorrect interpratetion of the data provided. The TLV encoding
functions take care of the optimization (i. e. encoding integers on the
minimum number of bytes needed), so it should prevent bandwith waste if
the unsigned value would actually fit into the integer of the
corresponding size.
Similar case is for the write hander, where unsigned integers encoded at
8 bytes were not processed correctly. Fix this by using wider decoder as
well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Listing a neighbour table with "net nbr" command, when a neighbour w/o
assigned link address was present, resulted in an assert condition. Add
additional check to prevent this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the BOARD_RUNNER_ARGS_${runner_id} variable contains anything, add
it to the global property of the same name with all the final runner
args from board_runner_args() and friends.
This allows use cases like this:
west build ... -- -DBOARD_RUNNER_ARGS_jlink="--some-jlink-arg"
The ${runner_id} part is the runner's name converted to a C
identifier, i.e. with special characters changed to underscores.
So e.g. the 'dfu-util' runner would use BOARD_RUNNER_ARGS_dfu_util.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The test assumed initial equality between CLOCK_MONOTONIC and
CLOCK_REALTIME and also assumed coarse granularity for each clock.
Neither of those assumptions are solid.
Furthermore, the test failed on multiple vendor boards which caused
some concern.
Remove the poorly conditioned tests and remove some comments
/ printks.
Fixes#35703
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
TCP state machine gets stuck in TCP_FIN_WAIT_2 state
when server responds with [ FIN, PSH, ACK ]
Fixes#37842
Signed-off-by: Nicolas Marty <nicolas.marty@zuehlke.com>
Using zsock_ in http_client instead of the POSIX API versions of the
functions allows the usage of http_client in combination with
CONFIG_POSIX_API.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
When enable thread awareness feature for OpenOCD the search path was
converted to a list. In some environments OPENOCD_DEFAULT_PATH may
not be defined. That create an empty search path list system fails.
This add a test to skips fill search_args with openocd_search values
when list is empty.
Fixes#38272.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When using the stack fork type in the philosophers sample,
there were a few pointer type mismatch since the k_stack_*()
functions are using stack_data_t but the parameters are uint32_t.
So cast them to void pointer to suppress compiler warnings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa does not store the stack pointers in thread objects but
pushing the registers into the stack. There is no fixed location
to retrieve the stack pointer so mark it as unimplemented to
avoid the #warning.
Fixes#38405
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When the application sets more than 251 bytes of advertising data,
the data is sent over multiple HCI commands.
This is only allowed if the advertiser is not running
as defined by the HCI specification.
The data is sent to the controller one AD-field at the time.
If an AD-field is larger than BT_HCI_LE_EXT_ADV_FRAG_MAX_LEN,
the data is split over two commands.
This introduces some additional complexity.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
add a bitarray into struct osThreadDef_t to indicate whether the
thread is used or not, then we can get the first available thread
by searching this array when creating a new thread, and update this
array to add a free thread when terminating a thread.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
BTP change extended L2CAP_CONNECT command by ECFC flag, which determines
which connection procedure is used (non-enhanced or ecred). Now, only
this flag determines the procedure used, not number of requested
channels.
This was affecting L2CAP/ECFC/BV-25-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The overview at the top of the page only listed ble and serial as
available transports. This commit adds udp to this list.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This commit disables the "minimum required newlib heap size" check for
the newlib thread safety tests since they do not make use of any newlib
functions that require large heap.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If the count is zero in the heap_malloc_free test, a div by zero
would happen, so add a condition to handle this potential error.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Add some tracing functions to fix that the samples/tracing code
cannot generate coverage by twister.
Fixed#38323
Signed-off-by: Lixin Guo <lixinx.guo@intel.com>
stm32f411 includes stm32f401 which do already correctly define spi4
The definition in stm32f411 was missing a clock attribute
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
stm32f410, stm32f411 and stm32f412 enable the SPI5 device with
bit 20 on the APB2 clock
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
In commit "pm: Fix weak linkage symbols" (PR #35274),
PM SoC hooks were converted to __weak to avoid clash with
new definition of these symbols in subsys/pm/power.c.
G0 power implementation was implemented in parallel
with this change and missed the update.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cadence XCC is based off of a very old 4.2 gcc compiler, which didn't
perfectly support C99 "inline" semantics with respect to
cross-translation-unit inline linkage (which Zephyr does not use, our
inlines are static only) and declaration order.
Fix the one spot where we were calling an inline before its
ALWAYS_INLINE definition, and add a flag to suppress the warning so
CI's trying to build with XCC and -Werror don't flip out.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Older binutils, like the (nine-year-old!) 2.23 version that powers
many Cadence XCC toolchains, happen not to support the "~" operator to
perform bitwise negation. And they generate an absolutely hilarious
series of inscrutable error messages when they try to tell you this
fairly simple fact.
Just fold it into the constant.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Due to a historical error introduced during an hci_uart refactor, the
get_len() function was using the wrong HCI H4 packet identifier for
commands. Instead of using H4_CMD (0x01) it was trying to match
BT_BUF_CMD (0x00).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This function wasn't being defined when SMP_BOOT_DELAY was set or when
SMP wasn't enabled. There's no reason for either, then function
doesn't depend on any kconfig-dependent build-time state, and (given
that we use -ffunction-sections) it won't appear in output binaries
unless called.
And there are use cases (e.g. z_smp_start_cpu()) where we need that
function even when BOOT_DELAY is enabled.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Th Configuration Server should respond with and Invalid AppKey Index
status code when the AppKey identified by AppKeyIndex is not known to
the node or is not bound to the model identified by the ModelIdentifier.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
When the MSI clock is selected as source on the stm32wbx device,
the MSI has a range to choose the MSI input frequency.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
ARC MWDT libraries require to implement locking interface
otherwise not all of functionality is guarantee to be
thread-safe.
So, let's implement locking interface.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
When affinity routing is enabled for Non-secure state
( GICD_CTLR.ARE_NS is '1'), need to set routing information
for the SPI interrupt.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
A check for valid_chan_io_qos in big_init_bis was missing
a negation when checking for invalid parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The equality check for remap was not being performed since the local
variable remap was assigned to the value being checked just before the
check. Some minor simplifications have been performed (fixed variable
types).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit now sets the Zephyr library property `ALLOW_EMPTY` to
silence the warning:
`No SOURCES given to Zephyr library: drivers__interrupt_controller`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This introduces a dedicated zephyr_library_property() function which
provides a common way to set Zephyr build system known properties on
Zephyr libraries.
As a first common property is the `ALLOW_EMPTY` property which allows
to create a `zephyr_library()` without putting any content inside of it.
In general libraries should not be created unless there are files to
places inside of it, however in some cases there are so many
`zephyr_library_sources_ifdef(<setting> <file.c>)`
where testing each setting before creating the library may not be
desired.
This commit allows the following construct in those cases:
```
zephyr_library()
zephyr_library_property(ALLOW_EMPTY TRUE)
zephyr_library_sources_ifdef(CONFIG_SETTING_1 file_1.c)
zephyr_library_sources_ifdef(CONFIG_SETTING_2 file_2.c)
...
zephyr_library_sources_ifdef(CONFIG_SETTING_n file_n.c)
```
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The conn_callbacks was duplicated in the file, due to a missing
delete when BT_CONN_CB_DEFINE was introduced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For twister, when simulation is mdb-nsim, the platform is
nsim_hs_smp. Before the twister will call west falsh
when platform is nsim_hs_smp, because twister can't kill
cld process, now this problem has been fixed
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Add nsim_sem_mpu_stack_guard.props and
nsim_sem_mpu_stack_guard.args, so we don't
do workarounds in cmake code.
Signed-off-by: Jingru Wang <jingru@synopsys.com>
It may be needed to run Zephyr at EL1NS level with `CONFIG_ARMV8_A_NS`
In order to run at EL1NS, you'll need a proper Firmware loaded in the
FVP model to run Zephyr at non-secure EL3.
The ARM TF-A for FVP can used to run Zephyr as preloaded BL33.
This adds the necessary cmake scripts to load the TF-A binaries and
load Zephyr as preloaded BL33 payload.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The struct stm32_pinmux_conf structure (and stm32_pin_func_t type)
are not used, so remove them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix assert at line 1085 in ull_adv_aux.c due to auxiliary
offset calculation scheduling on ticker timeout under must
expire which can happen for overlapping multiple advertising
sets without previous calculation not complete, a single
mayfly instance is used hence the assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To check security of connection in read_value() we need to actually
pass connection not NULL.
This is affecting GATT/SR/GAR/BI-11-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The commit adds CONFIG_IMG_MGMT_DIRECT_IMAGE_UPLOAD that allows
to turn on the direct image upload.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The val2 calculation was done using (1000000 / 40960) as
multiplying factor, which was sometimes leading to a
int32 overflow. So, let's use the equivalent (but smaller)
(3125 / 128).
Fix#38090
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enables the mcux ethernet driver and pin muxes on the
mimxrt1024_evk board in the same way as is done on the
mimxrt1020_evk and mimxrt1050_evk.
Documentation updated accordingly.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
cte_info_clear function is responsible for remove of CTE from
periodic advertising PDUs, including remove from optional chained
PDUs. The function uses subortinate function rem_cte_info_from_per_-
adv_chain to remove CTE from chained PDUs.
The rem_cte_info_from_per_adv_chain had pdu_prev and pdu as arguments.
After return from the function the pdu_prev should point to last
PDU from previously used periodic advertising data and pdu should
point to last new periodic advertising data.
The rem_cte_info_from_per_adv_chain function removes CTEInfo from
all but last one PDU. Last PDU must have removed AuxPtr field also.
Remove of CTEInfo and AuxPtr from last PDU is done explicitly in
the cte_info_clear function.
Unfortunately rem_cte_info_from_per_adv_chain had wrong type of
parameters for pdu_prev and pdu. These parameters were pointers
instead od double pointers.
That caused cte_info_clear function to remove CTEInfo and AuxPtr
from first PDU in a chain, which is AUX_SYNC_IND.
Changed parameters pdu_prev and pdu in the rem_cte_info_from_per_adv_-
chain to be double pointers.
Added small corrections in comments.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Co-authored-by: Emil Gydesen <Thalley@users.noreply.github.com>
There was a change in parameters list of function ull_adv_sync_pdu_-
alloc. There was a call in commmon.c file in connectionless_cte_chains
unit tests with use of former parameters list. That caused a compilation
error.
The commit fixes the compilation issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
We shouldn't use swapping with an interrupt lock held
as it works incorrectly on SMP platforms.
Fix that by replacing irq_lock with spinlock for pthread
subsystem.
NOTE: we fix that in a simple way with single spinlock
for mutex / cond_var / barrier. That could be improved
later (i.e. split it for several spinlocks).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
In some cases the 'reschedule' code path is executed when the current
thread is the same as the next thread in the ready Q. If this happens,
the swap_return_value of the thread is ifalsely being reset to -EAGAIN.
This commit prevents the rescheduling code to run if the current thread
is the same as the thread in the ready Q.
Signed-off-by: Wolfgang Reißnegger <gnagflow@fb.com>
According to the rule MISRAC-2012 21.4.a the standard header
file <setjmp.h> shall not be used. Suppress it, because it raises
violation in a testcode, not in a runtime code.
Tag suppresses reporting of violation for the current file,
starting from the line where the suppression is located.
It is a deliberate deviation.
Found as a coding guideline violation (MISRA R21.4.a) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The driver code for the Maxim DS3231 has repeated code for bit
manipulation to transform time data between binary and binary coded
decimal. Use the new BCD header functions instead.
Signed-off-by: Jake Swensen <jake@swensen.io>
Some devices (such as RTCs) have data formats that expect BCD values
instead of binary. These routines allow for converting between binary
and BCD formats.
Signed-off-by: Jake Swensen <jake@swensen.io>
Low power modes entry on stm32wb depends on requests coming from both
cores, with no consideration of the fact that C2 is booted or not.
By default, set C2 power mode to shutdown at C1 start up.
If required, it will be updated by C2.
In case C2 is not started, this will allow C1 to enter any power mode
with no dependency on C2.
Fixes#38173
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This adds arch_float_enable() and arch_float_disable() to x86-64.
As x86-64 always has FP/SSE enabled, these operations are basically
no-ops. These are added just for the completeness of arch interface.
Fixes#38022
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some architectures already returns -ENOTSUP when these functions
are called. So add this return value to the API doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds public API documentation for the thread bit
K_SSE_REGS. It was previously a single line comment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Setting this bit will wake up CPU if it is in low power mode
and an interrupt is pending.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This adds new FPGA controller which allow to control FPGA chips.
FPGA controller has been created to enable bitstream loading
into the reprogrammable logic. It adds completely new API,
which enables to check status of the FPGA chip, power it on
or off and reset it.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The HiFive Unleashed and HiFive Unmatched boards do not enable the
SPI0 controller that the flash is connected to. This test will not
build on these platforms because SPI0 bus controller is missing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds new support for SiFive HiFive Unmatched which has
SiFive FU740 SoC, DDR and some peripherals.
This is first version so not support all features on the board.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds support for SiFive Freedom U740 SoC.
First version is minimum only using UART, SPI and L2-LIM area.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds new support for SiFive HiFive Unleashed which has
SiFive FU540 SoC, DDR and some peripherals.
This is first version so not support all features of the board.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch adds support for SiFive Freedom U540 SoC.
First version is minimum only using UART, SPI and DDR memory area.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch changes condition of 'depends on' of sifive UART driver
to support other SoCs of SiFive Freedom series.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch fixes printf format specifier "%u" -> "%zu" for printing
an argument of size_t on 64bit environment.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
add board support for Dragino NBSN95 NB-IoT sensor
node. Initial support only includes UART (with followup
patches on BC95 and other peripherals)
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Trivial change for C++, reorder Z_MEM_SLAB_INITIALIZER members
initialization in the same order they are defined in k_mem_slab
structure.
Fixes#38219
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Add a very simple application intended to show how to use the Audio
DMIC API and also to be an aid in developing drivers to implement
this API.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a shim that allows using the nrfx PDM driver via the Zephyr API.
Add also missing devicetree nodes representing the PDM peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-pdm" binding with a new property that allows
specifying the clock source to be used by the PDM peripheral (so that
it is possible to use HFXO for better accuracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The name pinmux is misleading, since no actual pinmuxing is done (just
pull-up setup).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The internal pinmux API was being used to setup GPIO pull-ups, however,
this can be done using the standard GPIO API.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After the Technical Steering Committee decided to approve the transition
from Slack to Discord, it is necessary to update all the documentation
to reflect this change.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The free run timer will be used to count before entering hibernate
mode. Move the related registers to the head file for accessing.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Zephyr now requires CMake 3.20 or newer.
Let's remove comment regarding ADDITIONAL_CLEAN_FILES only supported
with CMake 3.15 or newer.
Also remove the ADDITIONAL_MAKE_CLEAN_FILES which provided the same
functionality, but only for Makefiles when using CMake <3.15.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The `set_conf_file()` was deprecated in
6d4ba3490f
which is before Zephyr v1.14 LTS.
Let's remove the support now, before releasing a new LTS.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This feature got written twice for two different purposes (to inform
the SOF app of which CPUs are running, and to predicate the delivery
of IPIs to the cores ready to receive the interrupt). Use only one.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When working with the SOF kernel driver, it likes to shut down the DSP
on error. That means there is a very small window in which to catch
any log output, even with a whiteboxed kernel. So we should be
polling much faster (10 Hz) for changes when we detect a reset.
Also, don't repeatedly log the device reset detection, it spams the
console badly when we crank up the rate. Just log it once and then
stay silent until we see output.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These are getting build failures due to some kind of devicetree
console definition missing. These devices don't do networking, and
strictly don't even have a proper console device (logging is done via
a host mechanism). Probably fixable. Not worth the trouble. Filter.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On pre-2.5 cAVS, the initial IDC interrupt to start the other core is
handled by software in the firmware ROM. That means that it has to be
unmasked for the mechanism to work (with 2.5, the interrupt is handled
by hardware regardless of what the masking state in the interrupt
controller is).
Similarly, the Xtensa Region Protection Option entries have already
been set by ROM code when we arrive in enable_l1_cache(), so we can
skip that part on older machines. Also removed because trying to
rewrite those entries was causing inexplicable hangs on cAVS 1.5,
plausibly because the region had active cache lines.
(This patch is separate for easier review in a long evolving PR.
Technically it represents a bisection problem as the "New IDC Driver"
patch before this was a regression. Seems like a safe enough thing to
handle if you land on this.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix various bugs with the new IDC layer that show up in edge cases
where code relies on correct timing of IPIs (unsurprisingly there is a
lot of code that recovers anyway even if the IPI doesn't arrive
promptly). Leaving this as a separate patch because the prior code in
the PR has already been reviewed and it "mostly" worked:
The unmasking of the L2 interrupt bit (remember there are three layers
of masking of the IDC interrupt) was always operating on CPU0 at CPU
startup because the code had been copied blindly. Unmask the CPU
we're actually launching. It turns out cAVS 2.x re-masks this on CPU
launch automatically.
The global init code to unmask all these interrupts at startup had the
same bug, even though it turned out to be needless (the initialization
state has it unmasked until it turns it back off). Do it right
anyway. Similarly add code to clear out existing interrupt latch
state by ACKing all IDC interrupts at startup. Seems needless, but
behavior isn't documented so let's be safe.
Flag CPU0 as always "active" for the purposes of IPIs. Forgot to do
this earlier, oops.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The alignment on .bss was coming out wrong. The ". = ALIGN(4096);"
statement was being ignored, somewhat inexplicably. This resulted in
the bss symbols being assigned corret-seeming, non-overlapping
addresses. But it overlapped the page-sized padding at the end of
.data.
As it turns out, the rimage format (not the linker or Zephyr) requires
page-sized sections to copy, and the bootloader code does that copy by
writing to the CACHED mapping of the memory (.bss is, like .data,
uncached/coherent by default). So at runtime the CPU was running in a
context where the cache was populated with "booby trap" data at the
start of .bss. True .bss access would hit the memory uncached and see
the "correct" value, but at arbitrary times during execution lines
would be flushed out of L1 cache on top of it.
Oops. This was found by accident, actually, as routine changes to the
linker script to correctly support the case where KERNEL_COHERENCE=n
(i.e. put everything in the cached mapping and nothing in uncached)
suddenly hit rimage failures because of the overlap.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
New docs for cavs_v25 describe building a Linux kernel for a
Chromebook and need to talk about these kconfigs.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a SOC API to allow for application control over deep idle power
states. Note that the hardware idle entry happens out of the WAITI
instruction, so the application has to be responsibile for ensuring
the CPU to be halted actually reaches idle deterministically. Lots of
warnings in the docs to this effect.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is a hardware startup state where power gating can be "enabled"
even though the core is actually launchable via an IDC interrupt (in
fact that's the hardware default). In that state, the CPU will launch
correctly but then unexpectedly shut itself off then it enters the
idle thread.
Don't rely on initialization state, always set the power and clock
gating bits (to disable gating) immediately before CPU launch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a struct-based interrupt masking API to match the existing shim
and IDC register interfaces. The existing interrupt controller code
isn't using it yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A simple WAITI isn't sufficient in all cases. The cAVS 2.5 hardware
uses WAITI as the entry state for per-core power gating, which is very
difficult to debug. Provide a fallback that simply spins in the idle
loop waiting for interrupts to provide a stable system while this
feature stabilizes.
Also, the SOF code for those platforms references a known bug with the
Xtensa LX6 core IP (or at least some versions), and will prefix the
WAIT instruction with 128 NOP.N's followed by an ISYNC and EXTW. This
bug hasn't been seen under Zephyr yet, and details are sketchy. But
the code is simply enough to import and works correctly.
Place both workaround under new kconfig variables and select them both
(even though they're actually mutually exclusive -- if you select both
CPU_IDLE_SPIN overrides) for cavs_v25.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On CPU startup, When we reach the cache flush code in arch_switch(),
the outgoing thread is a dummy. The behavior of the existing code was
to leave the existing value in the SR unchanged (probably NULL at
startup). Then the context switch would walk from that address up to
the top of the outgoing stack, flushing everything in between. That's
wrong, because the outgoing stack is a real pointer (generally the
interrupt stack of the current CPU), and we're flushing everything in
memory underneath it.
This also reverts commit 29abc8adc0 ("xtensa: fix booting secondary
cores on the dummy thread"), which appears to have been an early
attempt to address this issue. It worked (modulo all the extra and
potentially incorrect flushing) on cavs v1.5/1.8 because of the way
the entry code worked there. But on 2.5 we now hit the first context
switch in a case where those extra lines are in address space already
marked unwritable by the CPU, so the flush explodes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On cAVS 2.5, there is an inherent race with the IDC interrupt. It's
used for routine IPIs during OS operation, but also for launching a
power-gated core. Recent changes moved the unmasking of the IDC
interrupt earlier, which made it possible for early OS scheduler
behavior (e.g. adding the main thread to the run queue) to
accidentally launch the other cores into LP-SRAM that had not been
initialized.
Instead of treating this with initialization ordering, keep and
maintain a list of active CPUs and check them at runtime to be sure we
never try to IPI a CPU that isn't running yet. We're going to need
this feature when we add live core offlining anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use the built-in IDC handling and not IPM (which is limited to two
CPUs). Declare two cpus for now, Zephyr tests are having problems
with more at the moment (that isn't a CI configuration, so we may have
work to do).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The original interface for the intra-DSP communication hardware on
these devices was buried inside a Zephyr IPM implementation.
Unfortunately IPM is a two-endpoint point-to-point communication
layer, it can't represent the idea of devices with more than 2 cores.
And our usage (to push a no-argument/no-response scheduler IPI) was
sort of an abuse of that metaphor anyway.
Add a new IDC interface at the SOC layer, borrowing the C struct
convention already used for the DSP shim registers.
Augment with extensive documentation, extracted via a ton of
experimentation on cAVS 2.5 hardware.
Note that this leaves the previous driver in place for the cavs_v15
and intel_s1000 devices. In principle they should use it too (the
hardware registers are identical), but this hasn't been validated yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Earlier platforms were relying on the system ROM to have done this
correctly, but with CAVS 2.5 we launch the CPU into our own code
directly. So we need to do those steps manually. And there's also a
new one on this hardware, which has software power control over the
cache SRAM.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Hardware defaults for the secondary CPUs have the S32C1I instruction
set to be atomic only with respect to the local L1 cache, which is
basically useless on a multiprocessor platform. The CPU0 boot path
sets this manually, so we need to duplicate that here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On MP cores that don't come through the core entry point
(e.g. TGL/v2.5) we reach C code with hardware defaults for the RPO/TLB
settings. Set these up correctly on entry.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This hardware works a little differently. The cores will start up
immediately on receipt of an IDC interrupt (they don't need the host
to be involved), but they don't have a ROM. They start executing at
the start of the LP-SRAM block always. Copy over a tiny trampoline
for them that jumps to the existing multiprocessor startup path.
Also set the PS WOE bit to enable register windows in the startup
path. This isn't the hardware default, and where the ROM would do
that for us before here we need to make sure it's on.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This reverts commit ee7773fb46.
Unfortunately this mechanism doesn't seem to actually work on the SDK
linker. The emitted sections, when passed a symbol name as the "start
address" just appear wherever the "." variable was pointing (in this
case, into the cached region). That breaks the kernel coherence
layer, obviously.
Revert for now, which will regress the XCC build fix pending a proper
root cause.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This aligns the SoC initialization with the one in SOF,
especially the manipulation of clock control and power control
registers. These registers are not entirely the same across
CAVS versions, so we need to deal with them according to
which version we are building for. This also consolidates
the macros for these registers to the one provided by SOF
(soc/shim.h) to avoid duplication. Another note is that
the usage of clock gating bit was not correct. In SOF,
clock gating of SoC cores should be allowed but the old code
in Zephyr prevented clock gating, which has the potential to
prevent the whole DSP from going into low power mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The wall clock timer is not (per documentation) part of the
"timestamping" register set on the DSP. And its counter and
comparator registers work fine always. But if the DSP isn't set as
the "owner" of the timestamp hardware, wall clock interrupts never
arrive.
Also grab the PLL ownership too, because SOF already does anyway.
While we don't have a dynamic clock driver yet, we will surely want
one soon and will needt this.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These windows control host visibility of the trace output buffer. The
buffer itself is writable memory always, but until we get to the
register init the host can't see them. Since they contain
printk/logging output, they REALLY need to be initialized earlier than
anything else.
Also remove a rogue memset of the trace buffer. That buffer is
already being initialized in a lazy-evaluated way by the trace output
code, and blowing it away here has the effect of forgetting anything
earlier code was trying to log!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The default development environment for this target is in fact a
consumer Chromebook available to anyone. So it deserves public
documentation.
Note that this spends considerably more time explaining the details of
how to configure a chromebook as a Zephyr development platform than it
does the process for building and running Zephyr (which is really very
conventional). Chromebooks, which allow user-signed audio firmware,
are a great boon to SOF development. But they were never intended as
developer devices themselves.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a loader script variant for Tiger Lake (cAVS 2.5) devices, which
have very slightly different loading behavior from older 1.5 DSPs.
This is added as a "-v25.py" script, and the original has been renamed
to cavs-fw-v15.py. Note that there is no good reason except schedule
pressure that these are not the same script, I just wasn't able to
make a single script work compatibly in the time available.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support for the extended manifest blocks that recent versions of
rimage are including as a prefix on the firmware blob.
Also include some PCI runtime PM tricks to reliably enable the DSP
device on kernels that have turned off the DSP device automatically
(e.g. systems that have PM enabled by default but where the SOF driver
is not loaded -- chromebooks work this way, potentially other
distros).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr Bluetooth Mesh move adv send cb to buf destructor
callback, There are two net_buf_pool define, one to adv.c
and ore to friend.c, we are missing destructor in friend.c.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Two checks reported wrong value if the value was invalid.
CIS parameter check would always fail on correct values
due to missing negation of valid_chan_qos.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix two typos in documentation, one in a sample's comment, and one in a
sample's console message. Found while learning Zephyr and exploring the
sources.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Adds flash partitions and chosen nodes to the mimxrt1024_evk device tree
to support mcuboot on the internal QSPI flash.
Also adds missing zephyr,itcm chosen node.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
add correct binding, fix size to 32MBit, add erase and write
block size to support mcuboot and rename to reflect the actual
flash model.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
the config symbol was missing for some reason even though
the soc does have a flexspi peripheral like most other socs
in the family.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
For each compiler, also set a CMAKE_GCOV var referencing the appropriate
gcov tool.
Tested with gcc and host-gcc on the ChromeOS codebase.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Problem:
In some cases, as described in: https://github.com/zephyrproject-rtos/zephyr/issues/36948
shell backend sends characters to output before serial device
is ready for it. It results in observing additional characters
inserted on the shell input after device boot.
Solution:
Added waiting on DTR signal before sending anything to the output.
Fixes: #36948
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
When Public Key field is set to RFU value then we should send
Provisioning Fail with Invalid Format error.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Counter was not reset between various tests which may hide the fact
that number of preemptions is less than expected.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Stress test that was validating thread safeness was configured to use
higher sys tick rate and targeting qemu_x86 platform. However, it was
also build for other platforms and was failing. Fixing it by extracting
stress tests to separate configuration that is run only on qemu_x86.
Modified the test to fail when number of preemptions is less than
expected only on qemu_x86.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix MPU fault due to incorrect EV_COUNT, `conn_change`
signal was not accounted for in the array used by k_poll.
Relates to commit 7854088116 ("Bluetooth: ISO: Fixes
missing handling of broadcast ISO TX").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the locally MSI/MSI-X capabilities ID define and use the
newly introduced one from the PCI Code and ID Assignment
Specification Revision 1.11 document header.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add defines for all the PCI and PCIe capabilities from the PCI Code
and ID Assignment Specification Revision 1.11 document.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Extend the PCIe API to find Extended Capabilities in the PCI Express
Extended Capabilities located in Configuration Space at offsets 256
or greater.
Note: the Root Complex Register Block is not supported
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Improve the disconnect handling in the sample, and
avoid creating a new cig for each connection.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of disconnecting ISO channels on ACL,
we put them in a non-connected state, and wait for
the ISO disconnect events.
This ensure that the controller has free'd the
ISO channels when the iso disconnect callbacks
are received. It will thus be possible to e.g.
terminate the CIG on the ISO disconnect callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The disconnect handling of ACL connects in the sample was done
incorrect, and caused a call to bt_conn_unref with a NULL
pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There might be a sign extension when a long is promoted to
int_value_type and the former type is smaller than the later.
This produces the wrong output if the specified format is unsigned.
Let's avoid this problem by handling signed and unsigned cases
explicitly. When the type already matches int_value_type then the
compiler is smart enough to recognize the redundancy and removes
unneeded duplications automatically, meaning that the code will stay
small when code size matters.
A similar issue also existed in the restricted %llu case.
The fix is the same as above.
Those fixes exposed wrong results in the printk.c test with %llx
so fix that as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Function parameters can be checked without MQTT instance lock being
held. Additionally if NULL parameter would be passed (which this check
tries to handle), then function would return without releasing lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Sending of > 2k buffers leads to split socket writes.
Current implementation is not checking for full buffer size.
ztls_sendmsg_ctx proceeds to next iov on sucessful write.
Solution: Add loop into ztls_sendmsg_ctx to process whole buffer
before proceeding to next iov.
Signed-off-by: Pavlo Hamov <pasha.gamov@gmail.com>
Apply a similar fix for cavs_v20 as was done for other cavs platforms in
commit ee7773fb46 ("soc: intel_adsp: fix linker script for XCC").
Without this fix, cavs_v20 build with fail with 0.13.0 Zephyr SDK.
Fixes: 74cc8bee7c ("xtensa: cavs_v20: use uncached addresses to support SMP")
BugLink: https://github.com/thesofproject/sof/issues/4703
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
enable spi driver to support dspi edma
add support for shared dma mux spi port
for shared spi port we need judge the irq source
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
For the Xtensa platforms (e.g. qemu_xtensa), the first `malloc` call
may fail if the newlib heap base address is such that the first `sbrk`
call returns a 4096-byte aligned address.
Here we add a workaround for Xtensa that allocates and immediately
frees a 16-byte memory block during initialisation so that all
subsequent `malloc` calls succeed.
This commit needs to be reverted once the issue #38258 is fixed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The #36758 fixes coap_packet_get_payload function by normalizing
offset value in the library. That change create a regression on
UpdateHub. However, the UpdateHub can now use coap_packet_get_payload
function instead manually compute payload start and payload size.
This refactors the current code in favor of coap_packet_get_payload
and fixes the regression.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The user tracing backend allows one to implement weak symbols to perform
user specific tracing, e.g gpio toggling or spi transactions. This adds
a qemu sample that just does a simple printk for each of the traced
functions, but could be changed to do whatever function the user
desires.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create a new tracing option TRACING_USER that allows
the user to define certain user_sys_trace_... functions
to perform whatever work desired for tracing when
tasks are swiched in/out, during isr enter/exit, and when
cpu is idle.
This infrastructure can be useful for plugging into
locally defined tracing tools or any user-specific
debugging environment.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
IRQ_CONNECT macro last argument is architecture-specific flag,
but now there is instance id at this place.
This PR set architecture-specific flag to 0.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Atmel sam0 adc peripheral have multiple interrupt vectors for same5x
devices. This configure interrupt vector by name to ensure that proper
interrupt handle will be executed.
Fixes#37779
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a sent callback to bt_iso_chan_ops so that the application
can be notified when an SDU has been sent. This can help the
application decide whether to queue up multiple, or only
have a single ISO PDU enqueue for reduced latency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Kconfig refactor that replaces some single-symbol 'if's with
'depends on' added a second entry. That entry allows flash driver
be selected for SoC's without support. This fixes the 'depends on'
entry to allows only SAME/V SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit removes the `timeout_q` from the `struct z_kernel` since it
is no longer used.
Note that the new kernel timeout implementation introduced in the
commit 987c0e5fc1 uses `timeout_list`
global variable in place of it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
__cxa_atexit implementation provided by MWDT startup code calls
malloc which isn't supported right now. As we don't support
calling static destructors in Zephyr let's provide our own
__cxa_atexit stub and get rid of MWDT startup libs
entirely.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Default weak _exit implementation from ARC MWDT libs
calls _exit_halt from startup libs. As we are going to
get rid of startup libs usage let's implement _exit
stub.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This script allows us to programmatically query bug-bashers within
a user-supplied time-window.
For example, we held a "Bug Bash Week" August 1-7, 2021 (it was
announced a week early though). The output of the script prints
the "top ten" bug bashers in tab-separated columns in descending
order. The first column is the number of bugs squashed and the
second column is the github user id.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When we build tests/kernel/common/kernel.common.misra on
bl654_usb we get the following error:
subsys/usb/usb_descriptor.c:313:2: error: ISO C90 forbids array
'hwid' whose size cannot be evaluated [-Werror=vla]
Fix by removing use of usblen variable in array.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The code was wrongly calling DMA_Abort on a channel
that not initialized. This fixes Issue#38078
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Compatible "soc-nv-flash" was removed as part as #38077,
while it should have been kept, similarly to what was done
on other SoCs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On native_posix_64 we get the following compile error in CI:
error: format %u expects argument of type unsigned int
Fix by using %zu instead of %u as type is of size_t.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
PR #37938 aligns many linker symbols name like rom/rodata_regions ...,
but ae350 soc linker script doesn't update for that. Migrate all linker
symbols name to PR #37938 changes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The HCI spec defines the BIS index range as starting from
index 0x01. We had previously implemented it such that it
starts from 0x00, and then simply adding 1 to the index
when sending over HCI. However, this may cause issue with
other HCI, or other SIG defined specification, commands
and events, and thus it is probably simpler if we just
use the HCI defined range.
This commit disallows BIT(0) (representing the BIS
index 0x00) to be set, and removes the addition
of 1 when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Position over LTE (PoLTE) can be used to locate a device as
an alternative to GNSS.
Increase RX thread stack size for PoLTE processing.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow application control for starting modem driver.
This allows network attach to be randomized.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
When run by a makefile twister might fail to decode the text results of
commands, based upon the environment settings of the system. With this
change escape characters are removed before the string is passed to the
json decoder.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove littlefs dependency as FS backend works with any file system as
long as it is (manually or automatically) mounted.
Fixes#36851
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
Fix null pointer deferencing in Periodic Synchronization
when ULL execution context could not assign an auxiliary
context when in LLL scheduling to receive chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix null pointer dereferencing in Extended Scanning when
there are more peer devices than the allocated auxiliary
contexts.
When LLL scheduling does not get an auxiliary context
assigned in the ULL execution context, then further chain
reception is aborted, access to `lll->lll_aux` which is
NULL causes null pointer dereferencing in
`ull_scan_aux_release`.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Initiating a connection, release auxiliary
context memory referenced by the lll_aux pointer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Periodic Advertising Synchronization's drift
compensation to save radio ready and address capture on
AUX_SYNC_IND reception, restore and apply at the end of
reception of all AUX_CHAIN_IND PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of checking `if (iso == NULL)` it simply checked
`if (iso)` which is the opposite of what it should have done.
This completely blocks iso from connecting channels.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
So fare flash simulator had been forced to use the statistic
subsystem.
This patch introduces CONFIG_FLASH_SIMULATOR_STATS which allow to select
whether the statistic is involved in flash_simulator operations.
This patch allows to reduce flash footprint when the statistic is
not required.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For getting the address of the RAM region in the application we need to
extend the api for the flash_simulator.
This path introduce flash_simulator_get_memory() call which allow to
do so.
Signed-off-by: Sigvart Hovland <sigvart.m@gmail.com>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
cdc_acm_irq_tx_ready was not checking if its interrupt was enabled.
This causes spurious tx irq handler calls.
Signed-off-by: Eric Johnson <eric@liveathos.com>
Fixes the issue where uart_sam0_irq_tx_ready would return true if
the INTFLAG was set even though the INTSET bit for the given
interrupt was not enabled yet through uart_sam0_irq_tx_enable.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Create a board overlay file in the application directory to add
pwm-led0 entry over default device tree. Also, include instruction
in the README file that connection of external LED at pin PA8 is
required for the demo to work.
Signed-off-by: Waqas Mazhar <waqas.mazhar@planetinnovation.com.au>
Node names are subject to the rules in table 2.1 of the devicetree
specification v0.3, while properties are subject to rules in table
2.2. These rules mean that some property names are invalid node names.
However, the same regular expression is being used to validate the
names of nodes and properties in dtlib. This leads to invalid node
names being allowed to pass. Fix this issue by moving the node name
handling code to the Node constructor and checking against the
characters in table 2.1.
The test cases claim that the existing behavior matches dtc. I can't
reproduce that. I get errors when I use invalid characters (like "?")
in a node name. For example:
foo.dts:3.8-11: ERROR (node_name_chars): /node?: Bad character '?' in
node name
Try to make the dtlib error message reminiscent of that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is unused since the very beginning of the module's introduction.
It looks like it was abandoned in favor of the approach where each
token can have only one capturing group.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For low power operation, set the IP connection reconfig
flag when receiving a startup report.
This will ensure the GPRS connection is reconfigured
before any socket operations take place.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
We get build issues due to the removal of the Kconfig symbol
CONFIG_UART_SHELL_ON_DEV_NAME on platforms that didn't have a uart
set as we'd get a default value for those platforms. Update the
Kconfig logic to only enable SHELL_BACKEND_SERIAL if we have
zephyr,shell-uart specified in the devicetree to address the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow the driver to run if a SIM card is not present.
This allows public HL7800 APIs like firmware updates
to be used even if no network is available.
Remove duplicate query ICCID command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This changes "__nocache K_HEAP_DEFINE()" to use the new
K_HEAP_DEFINE_NOCACHE() macro. This fixes a build error
as K_HEAP_DEFINE() is specifying its own linker section
so that it is no longer possible to specify another
linker section.
Fixes#38108
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows a kheap to be defined in the uncached memory.
For example, this can be used for DMA transfer buffers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
System heap buffer was moved from dram0_0_seg to dram0_1_seg.
This commit fixes system heap buffer placement.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Timeout cancel should only be done for connections established in
peripheral role.
Enhanced connection complete event could still be delivered without
extended advertising support (i.e no advertising set terminated event)
so this handling should be moved to the common conn complete function.
Fixes#37467
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
SMP support on cAVS is implemented by using uncached addresses for all
writable data sections except for stack, i.e. for .data, .bss and
some other specialised ones. So far that has been implemented for
cAVS 1.5/1.8. This patch does the same for cAVS 2.0.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
PR #35774 introduced a uuid field in the bt_mesh_cfg_mod_pub structure.
The shell does not initialize this pointer before passing it to the
access layer. Add a line to initialize this pointer.
Fixes#38016.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL here, so the check is redundant. Coverity is
complaining because param is accessed before the NULL check.
Fixes#37949.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL, so this check is redundant. Coverity complains
about this, as the param variable is accessed before the check, which
would be wrong if param could be NULL.
Fixes#37948.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When Extended Scan Response data of length zero is set, the
Scan Response do not have the Common Extended Payload Format
and hence no ADI field. Fix uninitialized pointer to Scan
Response Data's ADI to avoid copy of ADI from primary
channel PDU.
Fixes#38015.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For some reason, XCC fails to build complaining segfault
during CGPREP phase. Adding an assignment to a volatile
return value seems to fix this. This provides an easily
revertable commit to workaround the issue.
Fixes#37734
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When ack data for extended address is set with the
nrf_802154_ack_data_set function, the extended address
must be reversed to the IEEE 802.15.4 address transmit
order in order to be properly matched.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Error handling was missing in numerous places, mostly on GPIO related
callbacks. Some error codes were not correct (-EINVAL vs -ENODEV) and in
some cases error was not propagated correctly.
Fixes#38117
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Error handling was missing in numerous places, mostly for GPIO related
callbacks. An assertion has been used in the context of thread callback.
Fixes#38132
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The TF-M build is passed a path to the mbedtls project
directory, however, NCS has its own mbedtls variant. When
building with TF-M we use a generator expression to allow
setting the path to mbedtls from nrf_security.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Apply the same fix in bd8afe9365
(" drivers: sensor: clean up zephyr_library calls") to remove
redundant code in the sensor driver build system files. Additional
instances of the antipattern have crept in.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The rpmsg_mi_configure_shm() function is not returning anything and it
is not marked as static. Fix this changing the return type to 'static
void'.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When possible use 'size_t' for sizes and 'uintptr_t' for generic
addresses instead of relying on uint*_t types.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The result of temperature and relative humidity ticks ranges from 0 to
65535 which is the range of a uint16_t variable. Intermediate tmp
variable type has also been adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When call bt_gatt_indicate with param->attr set to null.
and attr->uuid set to given uuid, the internal notify will
search uuid, but not assigned to param->attr, which cauce
null point reference when:
notify --> gatt_indicate --> bt_gatt_check_perm
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When call `bt_gatt_notify_cb` with param->attr set to null.
and attr->uuid set to given uuid, the internal notify will
search uuid, but not assigned to param->attr, which cauce
null point reference when:
notify --> gatt_notify --> bt_gatt_check_perm
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The max-erase-time property was introduced for the STM32 flash driver,
but it was inserted as an optional property in the generic
soc-nv-flash binding which is used by other SoCs.
Make it a required property in a new st,stm32-nv-flash binding
instead, since it is at present a vendor specific property.
Update the DTS files accordingly. Keep the existing "soc-nv-flash"
value in the compatible list in each case, so that DT_HAS_COMPAT(...
soc_nv_flash) tests on these nodes will still succeed, but put it
after a newly added "st,stm32-nv-flash" compatible, so that the
SoC-specific binding will be used as it is discovered first by the DT
tooling.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add myself and Teng-Shih-Wei as owners for andes_v5 soc series, dts,
adp_xc7k_ae350 board, and device drivers from Andes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Adding adp_xc7k_ae350 board support based on andes_ae350 soc. It's base
support and only contains uart/gpio drivers.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This initial support of L2C driver only contains cache enable and HW
capability checking. Cache management operation isn't supported yet
in this driver.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Andes V5 PMA can let SW programmably configure memory attribute of
physical memory region. This commit enable CONFIG_NOCACHE_MEMORY of
Andes V5 CPUs based on the PMA. Use PMA region 0 to set whole nocache
section as uncached memory.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Support custom RISC-V CSR context switch for Andes V5 CPUs.
Both AndeStar V5 DSP and PowerBrake features have it's own CSR to be
saved for thread and ISR context, so adding these CSRs into the RISC-V
SOC context management framework (CONFIG_RISCV_SOC_CONTEXT_SAVE).
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add andes_v5 SoC series and andes_ae350 SoC. It includes
soc initialization code, linker script, and custom CSR encoding.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Latel we have had several failures and regressions due to the setting of
CONFIG_SRAM_BASE_ADDRESS to really high values (over the 4GB boundary).
To try to catch these problems as early as possible we add a build-only
test based on the hello_world_user sample that tries to compile the test
using a combination of CONFIG_SRAM_BASE_ADDRESS and
CONFIG_KERNEL_VM_BASE set to high values in memory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add logging for NRFX_USBD_EP_ABORTED event inside
control transfer events handling, otherwise "Unexpected event"
error message in this regard confuses the users.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable thread awareness by default on philosophers sample. It shows
gdb debugging output using the feature as reference.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit disables running the CMSIS-DSP tests on the mps3_an547
board because the QEMU, which is default emulation platform for it,
does not currently support the emulation of the MVE instructions.
Refer to the issue #37694 for more details.
Revert this commit once QEMU 6.2 is released and integrated into the
Zephyr SDK.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the quaternionmath F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the interpolation Q7 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CF64 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CF32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CQ31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the transform CQ15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the svm F32 test patterns and implementations for
the CMSIS-DSP 1.9.0.
Note that the one-class SVM test has switched from using RBF to linear.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the support F32 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Note that the spline interpolation feature has been moved from the
'Support' module to the new 'Interpolation' module.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the statistics Q7 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Unary F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary F64 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Unary Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Binary F64 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Binary F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the matrix Binary Q7 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Binary F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Binary Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the matrix Binary Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering DECIM F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering DECIM Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering DECIM Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit makes the tests for the partial convolution functions
(`arm_conv_partial*`) optional because these functions have computation
precision-related issues (tested with CMSIS-DSP 1.9.0, which is part of
the CMSIS 5.8.0 release).
The partial convolution functions (especially the fast variants) can
return very low-precision results (as low as 14dB SNR) under certain
configurations.
This issue will be further investigated and reported to the upstream
CMSIS developers.
Once this issue is fixed upstream, revert this commit in order to make
the partial convolution tests run all the time.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering MISC F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC F32 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC Q31 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC Q15 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filtering MISC Q7 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering FIR F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the filtering BIQUAD F16 test patterns and
implementations for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the basicmath F32 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the basicmath Q31 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the basicmath Q15 test patterns and implementations
for the CMSIS-DSP 1.9.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the common test and validation routines for the half-
precision floating point data.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the CMSIS-DSP configurations for the CMSIS-DSP
1.9.0, which is part of the CMSIS 5.8.0 release.
Note that the Helium/MVE configurations are removed because CMSIS-DSP
now automatically selects them if available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the half-precision (16-bit) floating-point
configurations to the ARM AArch32 architectures.
Enabling CONFIG_FP16 has the effect of specifying `-mfp16-format`
option (in case of GCC) which allows using the half-precision floating
point types such as `__fp16` and `_Float16`.
Note that this configuration can be used regardless of whether a
hardware FPU is available or supports half-precision operations.
When an FP16-capable FPU is not available, the compiler will
automatically provide the software emulations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Note that the it8xxx2 does not support a status register so that
functionality is omitted.
This change also adds driver tests that build both the npcx and it8xxx2
drivers.
Signed-off-by: Yuval Peress <peress@chromium.org>
There was a typo that snuck into the bbram driver for npcx.
Fix the driver and update the Kconfig to automatically include the
driver if the compatible string exists in the dts. This ensures that
the driver is built when building the npcx evbs.
Signed-off-by: Yuval Peress <peress@chromium.org>
Add nrf51 MDK defines needed to correctly select the nrf51 erratas
needed on the specific SoCs. The nrf51_erratas.h header file only uses
these defines to check which erratas should be applied.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Change IPM_STM32_HSEM Kconfig definition so that it picks the correct
default automatically depending on which cpu node is enabled in the
device tree, rather than relying on board specific Kconfig overrides.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Prefix ringbuffers with cdc_acm because it is not possible
to use static specifier with RING_BUF_*_DECLARE_* macros
to avoid conflicts.
Fixes: #36608
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Issue #37006 highlighted that some tests are prone to not passing on
QEMU for 32-bit RISC-V. This commit enables running tests in Renode on
emulated 32-bit RISC-V m2gl025_miv platform as a double-check.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
PR #36996 disabled running mem_protect/stack_random test on qemu_riscv32
platform because of this test consistently failing on said platform.
This test starts new threads in equal time intervals, and because of
that we get repeating values after performing the modulus operation when
calculating the stack pointer address.
This can be solved by changing the value of the _RAND32_INC constant
that is used to increase the value returned by the timer-based PRNG.
This commit decreases the value of the mentioned constant from
1000000013U to 1000000003U.
Fixes#37006.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
After pinmux being converted to build a separate static library
console not show anymore and there is a hard fault. The hard
fault happen because pinmux drivers are not ready yet and board
emits an assert. This change board pinmux initialization to
PRE_KERNEL_2 and let system take care error handling.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit adds an additional test case for several kernel test suites
to ensure that the linker script generator is working correctly for a
subset of the Zephyr test suites.
The ensures that the basic functionality of the linker script generator
is working while still keep the performance impact on CI at a minimal
level.
Using the kernel tests is a trade-off between testing coverage of the
linker script generator and the time it takes to complete CI.
The kernel tests is considered to have the broadest coverage of various
features important for the generated linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The stub file threading_weak.c has been added containing weak stub
implementation of threading related kernel functions.
The file is needed for armlink.
When linking with armlink the linker will resolve undefined symbols for
all undefined functions even if those functions the reference the
undefined symbol is never actually called.
This file provides weak stub implementations that are compiled when
CONFIG_MULTITHREADING=n to ensure proper linking.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Support for ARM Compiler C library.
This commit add support for the ARM Compiler C libary in:
- Kconfig
- libc/armstdc
A new Kconfig symbol is added to allow a toolchain to specify if they
support linking with the minimal C library.
Also the CMake variable `TOOLCHAIN_HAS_NEWLIB` is exported to Kconfig
so that CONFIG_NEWLIB_LIBS can only be enabled if the toolchain has
newlib.
The armclang toolchain selects the CMake scatter file generator and
disables support for the LD linker template which is not supported by
armlink.
For the ARM Compiler C library, a corresponding lib/libc/armstc/ folder
with a minimal implementation to work with the ARM Compiler C library
is added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces armlink steering file.
A steering file in armlink allows Zephyr to keep using existing linker
symbols defined in ld scripts and used throughout the code tree.
The steering file is generated at build time in order to resolve Zephyr
linker symbols to their corresponding armlink symbols.
As example, Zephyr defines __ramfunc_start which corresponds to the
armlink auto defined Image$$ramfunc$$Base symbol.
Or __init_PRE_KERNEL_1_start which corresponds to Image$$init_0$$Base.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The default armlink signature uses `--list=<TARGET_BASE>.map`, but in
Zephyr we uses a different name for the map file, therefore we need to
specify a custom link executable signature.
This is done in the linker specific flags file:
cmake/linker/armlink/linker_flags.cmake
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When using ARMClang linker and scatter files (armlink) then all
libraries are linked as object libraries using `$<TARGET_OBJECTS:lib>`.
CMake version 3.20 only has limited support for such linking:
> Referencing $<TARGET_OBJECTS> in target_link_libraries calls worked
> in versions of CMake prior to 3.21 for some cases, but was not fully
> supported.
One of those cases that do not work is Unix Makefiles generators.
As only Ninja is currently verified to work, this commit will check the
CMake version in use and the generator, and if CMake version <=3.21 is
used with non-Ninja generator then an error is raised informing user
to either use Ninja generator or update CMake.
As the Ninja generator has been confirmed to work as expected, then that
generator is accepted with CMake 3.20 and older.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is the initial support for the armclang compiler together with the
armlink linker.
Introduced in this commit:
- armclang compiler support
- armlink linker support
- armlink scatter file generator for scatter loading
- dual pass linker script generation
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Initial bintools support for elfconvert
- hex, srec, bin conversion
- strip
- gap fill
Initial bintools support for readelf
Initial bintools support for disaasembly
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The armclang.h includes the toolchain/llvm.h header.
Also it redifines the __GENERIC_SECTION and Z_GENERIC_SECTION so that
they includes the `used` attribute which is needed by armlink.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
A "Linker script" choice group has been added to the linker options
menu.
The existing HAVE_CUSTOM_LINKER_SCRIPT config has been relocated inside
the linker script menu.
Two new entries has been created:
- LD template, for using the old ld template files together with the C
pre-processor to create the final linker script.
- CMake linker generator, used for ARMClang / armlink toolchain.
The CMake linker generator is also supported for LD linker scripts
for the ARM architecture.
In CMake, the file cmake/linker/ld/target.cmake has been updated to
support the CMake LD linker generator.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adding intial version of ld_script.cmake.
This script can generate ld linker script from the Zephyr CMake linker
functions.
This script is called by the build system and all linker settings, such
as memory regions, groups, output sections, linker symbols defined with
Zephyr CMake linker functions are passed to this script in order to
generate an ld linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adding intial version of linker_script_common.cmake.
This script parses memory regions, groups, sections, settings, and
symbols defined in the Zephyr CMake build system.
The linker script creates objects for each type above and groups
sections, symbols, and groups together based on their configuration.
This creates a hierarchy which the `<linker>_script.cmake`
implementations can then use during linker script generation.
linker_script_common.cmake also provides stubs for <type>_to_string()
functions which are used when generating the output script.
Each specific `<linker>_script.cmake` must implement those to_string()
functions to create the final linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit add devicetree memory regions added to arm/linker.cmake.
The following memory regions are now added to the generated linker
script and scatter file if they exists in the devicetree.
- chosen: zephyr,itcm
- chosen: zephyr,dtcm
- nodelabel: ti_ccfg_partition
- nodelabel: sram1
- nodelabel: sram2
- nodelabel: sram3
- nodelabel: sram4
- nodelabel: sdram1
- nodelabel: sdram2
- nodelabel: backup_sram
Also support for the itcm and dtcm section and their placement in
corresponding memory regions has been added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is the initial version of a Zephyr CMake linker file for the arm
architecture.
This file defines memory regions, groups, linker sections and symbols
for the arm architecture.
It also sources the common common-ram.cmake, common-rom.cmake,
debug-sections,cmake, and thread-local-storage.cmake.
It configure sections for SoC families using zephyr_linker_sources()
functions:
- nxp_imx
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit specifies the intList section in the IDT_LIST region in the
arch/common CMakeLists.txt file.
It uses zephyr_linker_section to setup the intList section for first
pass linker file and configures the section to hold irq_info and
intList input section.
For second pass linker file, the irq_info and intList input sections are
placed in the /DISCARD/ section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Converted existing ld script templates into CMake files.
This commit takes the common-ram.ld, common-rom.ld, debug-sections.ld,
and thread-local-storage.ld and creates corresponding CMake files for
the linker script generator.
The CMake files uses the new Zephyr CMake functions:
- zephyr_linker_section()
- zephyr_linker_section_configure()
- zephyr_linker_section_obj_level()
to generate the same linker result as the existing C preprocessor based
scheme.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces zephyr_linker_dts CMake functions for creation of
linker scripts based on devicetree nodes.
The linker devicetree functions supports the following features:
- Configuration of memory sections based on devicetree nodes
Overview of functions introduced with this commit:
- zephyr_linker_dts_memory
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces zephyr_linker CMake functions for creation of
linker scripts.
The linker functions supports the following features:
- Configuration of memory sections
- Configuration of memory groups
- Creation of output sections
- Configuration of input section the should go into output section and
how those should be treated, such as sorting, keep, priority.
- Defining linker symbols
- Specifying Kernel VMA to support virtual linking on x86
Overview of functions and macros introduce with this commit:
- pow2round
- zephyr_linker
- zephyr_linker_memory
- zephyr_linker_memory_ifdef
- zephyr_linker_group
- zephyr_linker_section
- zephyr_linker_section_ifdef
- zephyr_iterable_section
- zephyr_linker_section_obj_level
- zephyr_linker_section_configure
- zephyr_linker_symbol
- zephyr_linker_property_append
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The current gen_handles.py script uses linker defined symbols.
As preparation for support of more linkers the gen_tables.py now takes
the device start symbol as argument.
For example, armlink and ld uses different symbols.
With ld those can be named explicitly, but for armlink the linker
decides the names.
For ld, Zephyr defines: __device_start
For armlink, the symbol is defined as: Image$$<section name>$$Base
Therefore knowledge of the linker symbol to be used must be passed to
gen_handles.py so that the correct symbol can be used for locating
devices.
To support this change, the creation of the asm, compiler, compiler-cpp,
linker targets has been moved from target_toolchain_flags.cmake to
target_toolchain.cmake.
All linkers has been updated to support the use of the
device_start_symbol on the linker target.
List of linkers updated:
- ld
- lld
- arcmwdt
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Advertising might stop when:
- it was stopped by application
- device connected to a peer
- extended advertising reached stop condition
defined in BT_LE_EXT_ADV_START_PARAM - this is handled in ll
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Call bt_le_adv_stop() if adv == bt_dev.adv (Meaning it is the legacy
advertiser and was started with bt_le_adv_start()), otherwise use
bt_le_ext_adv_stop(), because it was started with bt_le_ext_adv_start().
Failing to stop advertising shouldn't result in assert.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Some test cases require the IUT to respond with a certain error. To get
the stack to return this error to PTS the application needs to be
configured specifically for this test case.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This changes pci_msi_enable() to take IRQ number as a function
parameter. The old behavior relies on putting the IRQ number
into the interrupt line register in the PCI config space
during IRQ allocation, and reading it back when enabling IRQ.
However, the interrupt line register is only required to be
read-/writable when legacy interrupt is supported on the device.
Otherwise it has undefined behavior. On ACRN, they don't even
care about this register and always wires it to 0x00.
So this commit changes the behavior in pci_msi_enable() to not
require reading back the interrupt line register and instead
takes the IRQ number via function parameter.
Fixes#36765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Temporary disable tests/lib/ringbuffer failing tests on
qemu_arc_hs6x until we fix the rootcause so we can enable
qemu_arc_hs6x in upstream verification.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Temporary disable logging-related failing tests on qemu_arc_hs6x
until we fix the rootcause so we can enable qemu_arc_hs6x in
upstream verification.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add support for signing i.MX SOF with Zephyr images with rimage.
Note that, for i.MX, we don't need a bootloader nor the .elf.mod files
since there is no need to change the VMA/LMA of each uncached section
to the equivalent address in the cached area of memory.
For the above reasons, I've updated the arguments given to "west sign"
command.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
For IMX, for timer interrupt, the interrupt handler
was not the correct one executed and that’s because
the handlers were not at the expected address.
For IMX the size constraint of the interrupt vector
table entry is 0x1C bytes of code, less than usual.
I've added a small indirection to bypass this size
constraint and moved the default handlers to the end
of vector table, renaming them to
_Level\LVL\()VectorHelper.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Xtensa GCC needs a different toolchain per SOC,
so add support for i.MX8.
If SOC_SERIES is imx8, that's for i.MX8QM and
i.MX8QXP.
If SOC_SERIES is imx8m, that's for i.MX8MP.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add a common part for all i.MX boards.
Add support for i.MX8, which represents i.MX8QM.
This has a 1 Xtensa HiFi4 core, with 64 KB TCM,
448 KB OCRAM, 8MB SDRAM and 1 ESAI, 1 SAI as
audio interfaces.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add dtsi file for i.MX8QM and i.MX8QXP boards.
These two have the same board-level definitions,
so we call it, generically, imx8.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
ld linker will only resolve undefined symbols inside functions that is
actually being called.
However, not all linkers behaves this way. Certain linkers, for example
armlink, resolves all undefined symbols even if during a later stage at
the linking the function will be pruned.
Therefore `ifdef CONFIG_GEN_ISR_TABLES` has been placed to safeguard
functions that will call undefined symbols when CONFIG_GEN_ISR_TABLES=y.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
z_arm_do_syscall is only defined and used when CONFIG_USERSPACE=y.
Defining the symbol z_arm_do_syscall in assembly without a corresponding
implementation is fine for GNU ld as long as the function is not
actively called, but armlink fails to link in such cases.
Safegaurd GTEXT(z_arm_do_syscall) so the symbol is only referenced when
actively used, that is when CONFIG_USERSPACE=y.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To support arm-ds / armlink it is required that the weak main is located
in an object externally to the object using the weak symbol.
If the weak symbol is inside the object referring to it, then the weak
symbol will be used and this will result in
```
Error: L6200E: Symbol __ARM_use_no_argv multiply defined
(by init.o and main.o).
```
as both the weak and strong symbols are used.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for __itcm_load_start and
__dtcm_data_load_start to other symbols and in such a way they follow
consistent pattern which allows for linker script and scatter file
generation.
The symbols are named according to the section name they describe.
Section names are itcm and dtcm.
The following symbols are aligned in this commit:
- __itcm_rom_start -> __itcm_load_start
- __dtcm_data_rom_start -> __dtcm_data_load_start
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_text_start and _image_text_end sometimes includes
linker/kobject-text.ld. This mean there must be both the regular
__text_start and __text_end symbols for the pure text section, as well
as <group>_start and <group>_end symbols.
The symbols describing the text region which covers more than just the
text section itself will thus be changed to:
_image_text_start -> __text_region_start
_image_text_end -> __text_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _ramfunc_ram/rom to other symbols and
in such a way they follow consistent pattern which allows for linker
script and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `ramfunc`
The following symbols are aligned in this commit:
- _ramfunc_ram_start -> __ramfunc_start
- _ramfunc_ram_end -> __ramfunc_end
- _ramfunc_ram_size -> __ramfunc_size
- _ramfunc_rom_start -> __ramfunc_load_start
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each section,
and sometimes even size and LMA start symbols.
Generally, start and end symbols uses the following pattern, as:
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
However, this pattern is not followed consistently.
To allow for linker script generation and ensure consistent naming of
symbols then the following pattern is introduced consistently to allow
for cleaner linker script generation.
Section name: foo
Section start symbol: __foo_start
Section end symbol: __foo_end
Section size symbol: __foo_size
Section LMA start symbol: __foo_load_start
This commit aligns the symbols for _data_ram/rom to other symbols and in
such a way they follow consistent pattern which allows for linker script
and scatter file generation.
The symbols are named according to the section name they describe.
Section name is `data`
A new group named data_region is introduced which instead spans all the
input and output sections that was previously covered by
__data_ram_start, __data_ram_end, and __data_rom_start.
The following symbols are aligned in this commit:
- __data_ram_start -> __data_region_start
- __data_ram_end -> __data_region_end
- __data_rom_start -> __data_region_load_start
The following new symbols are introduced so that the data section is
aligned with other sections:
- __data_end
- __data_start
value identical to __data_region_start but describes start of
the section.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Commit 6b3c5e8bb2 removed the use of
_DATA_IN_ROM but kept the now unused define.
This commit removes the corresponding define which is no longer used.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Removed stray whitespace in readelf infile and outfile flag.
Some bintools use `--arg=<val>`, others `--arg <val>` therefore the call
at this location should not force a space, as that will fail on tools
using `=`, as this becomes: `--arg= <val>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Commits affecting Zephyr that are included with the new revision:
1e0f283c71 zephyr: Make direct image upload configurable
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
PM_DEVICE_STATE_RESUMING and PM_DEVICE_STATE_SUSPENDING
are transitional states and are only used in device runtime. Remove it
and use device flag to keep track of a transition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
by including interrupt allocation feature whenever an Xtensa-based
Espressif SoC is selected.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
to make use of Espressif's hal in order to ease both
driver maintenance and code reuse between socs.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
The magic code to identify context content is a 32-bit value
defined in the dma.h. When tested against the dma_context magic element,
both format must be aligned.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In the dma.h there is a dma_ctx structure using a magic code
to be identify. This structure must be prepared as a new
element of the dma_stm32_data.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for specifying a custom OpenOCD command to be used for
resetting and halting a target.
As noted in the OpenOCD documentation, not all targets support the
"reset halt" command for halt-on-reset.
Some targets support a software emulation via the "soft_reset_halt"
command. Other targets may require a custom command (e.g. a command
defined in the target configuration file).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This fixes/improves the rounding errors that are introduced
through the truncation of integer division.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
'err' is already defined in parent scope, we can use. Just need to set
it back to 0 before returning from function.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This was changes when sync chain handling was done in lll_scan_aux, we
can now revert to original code.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need more RX nodes when scanning either extended/periodic advertising
trains and CTE samples so pudate those values based on observer and DF
features enabled.
The number of nodes for non-DF allows to scan complete chain for each
aux scan set (assuming max data length and optimal fragmentation by
advertiser), for DF it allows to scan max possible PDUs and CTE samples.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising train scanner implemented in lll_scan_aux adds lots
of branches that cannot be compiled out with periodic advertising sync
disabled.
This commit moves sync parts of the code from lll_scan_aux to lll_sync.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising PDUs are now dispatched immediately one by one
(i.e. without list of PDUs as when flushed from aux context) so we
do not need to iterate such a list.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA, TargetA, ADI and SyncInfo are RFU in periodic advertising PDUs so
we should ignore them when present in PDU.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising reports can be reated directly from single PDU
as they do not require any information from superior PDU, so we can
dispatch them immediately instead of buffering in aux context and
flushing at the end of chain.
This also resolves proper order of Periodic advertising and IQ reports.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We use 1st node enqueued in aux context to retrieve lll scan/sync
struct, but that only works if we buffer PDUs in aux context. It's
better to store parent lll struct as explicit member in aux context
as this also works if we skip buffering.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds complete support for scanning for periodic advertising trains.
AUX_SYNC_IND is always scheduled from ULL as usual, then code for aux
scanning is reused to allow for AUX_CHAIN_IND scanning scheduled from
both ULL and LLL, depending on AuxPtr.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
aux->rx_last cannot be NULL since it's always set after acquire to a
valid node so the flow in flush() can be simplified.
rx parameter is only used to update PDU chain, then it's overwritten,
so we can instead update PDU chain in caller since there's only one
place when this should happen.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should decide on flush immediately vs. from disabled_cb based on
ull_hdr reference count instead of last rxd node - if ull_hdr has
non-zero ref, then done event is still pending and we should flush
from there.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising reports can have 255 bytes of payload so need to
use that value by default if periodic advertising is enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Update the name of the bt_conn pointers to make it clear
whether the connection pointers are ACL or ISO connections.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make the name of the internal bt_conn pointers explicit as to
whether they point to an ACL or ISO bt_conn.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We add support of mpu v6 therefore it is needed to have a board to
validate that feature. This commit add a new HS nsim simulator
which supports mpu v6.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Add support of ARC mpu v6
* minimal region size down to 32 bytes
* maximal region number up to 32
* not support uncacheable region and volatile uncached region
* clean up mpu code for better readablity
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
This commit removes PHY and MDIO specific code from the ATSAM
Ethernet driver and instead relies on a separate PHY driver to
handle the PHY.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This commit adds support for Ethernet PHY drivers via a PHY API.
It also includes a driver for a generic MII compliant PHY
which supports most PHYs on the market.
Separating PHY driver from the SoC specific Ethernet driver
simplifies the Ethernet driver code and enables code re-use.
Drivers for specific PHYs with more advanced features, such as
RGMII delay in PHY can be developed independent of the Ethernet
MAC driver.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Ignore received Extended Advertising PDU with RFU field set
in the Common Extended Advertising Payload Format of the
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines to access hdr_data fields used by interfaces to
populate the Common Extended Advertising Payload Format in
the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines for event instant and event instant latency
maximum values of 65536 and 32767 respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation in Periodic Advertising Synchronization
to support Channel Map Update Indications present in the
ACAD fields of the AUX_SYNC_IND PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Organize in a more logical flow the device state initializer and
the device initializer parts.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Z_DEVICE_STATE_DEFINE macro was conditioned by CONFIG_PM_DEVICE.
This is a problem if one day we have other conditional fields in the
device state field that need to be initialized. The approach has been
changed to have an always existing initializer for the PM field, that is
a no-op if device PM is not enabled.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Create a utility macro to initialize struct pm_device. The initializer
is kept in the pm/device.h header.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The usage field was being initialized using the ATOMIC_INIT macro,
however, it is just a uint32_t variable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The initialization of the struct pm_device pm field found in the device
state can be statically initialized without the need of doing it at
runtime.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make the block of code that is used to release node rx with
type NODE_RX_TYPE_RELEASE to be conditionally available for
other Kconfig selectable features like Extended Scanning.
Previously it was only available for CONFIG_BT_CONN, but now
Extended Scanning with LLL scheduling releases node rx when
radio event is closed due to failure to receive an auxiliary
PDU.
Relates to commit 2feffaf719 ("Bluetooth: Controller:
Release LLL scheduling aux on incomplete data").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of connection handle in the LLL context.
During a central connection, if LL reset is called, then
disabled connection context's handle has to be reset
otherwise new connection creation will fail by detecting
that there exists a connection to same peer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to initiator to check and reject
connection requests to already connected peer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ULL reference count is checked in ULL_LOW context to decide
if LLL events are pending, but the reference count can be
decremented by the ULL HIGH execution context which can
prevent the set `disabled_cb` function not being called due
to no pending event to produce the done events.
Fixed by checking the reference count in the ULL HIGH
execution context using a mayfly to schedule the check.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Zephyr thread awareness is available for openocd but boards don't
have debuggers configuration. This configure OpenOCD runner
automatically to complete configuration.
User still require enable CONFIG_DEBUG_THREAD_INFO=y to visualize
thread debug information.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This patch is the first step to make the rpmsg_multi_instance usable in
a multi-core scenario.
The current driver is using a local driver variable (instance) to track
the number of allocated instances. This counter is practically used to
allocate to the instance the correct portion of the shared memory.
This is fundamentally wrong because this is assuming that it does exist
only one single shared memory region to split amongs all the allocated
instances. When the platform has more than one core this is obviously
not the case since each couple of cores are communicating using a
different memory region.
To solve this issue we introduce a new struct rpmsg_mi_ctx_shm_cfg that
is doing two things: (1) it's carrying the information about the shared
memory and (2) it's carrying an internal variable used to track the
instances allocated in that region. The same struct should be used every
time a new instance is allocated in the same shared memory region.
We also fix a problem with the current code where there is a race
between threads when accessing the instance variable, so this patch is
adding a serializing mutex.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For the instance configuration the rpmsg_multi_instance code is
currently using a set of configuration info coming from two different
sources: the rpsmg_mi_ctx_cfg struct and Kconfig.
This is not only confusing but it's preventing to configure the
instances using information not coming from Kconfig (for example if we
want to configure the instance using DT).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This enables qemu_x86_tiny to be used for more general demand
paging testing where non-pinned code and data is not available
in physical memory at boot. This adds a custom linker script to
qemu_x86_tiny for pinning code and data. In the process, a new
kconfig CONFIG_BOARD_QEMU_X86_TINY has to be introduced to
distinguish from other qemu_x86* boards. This linker script
is based on the generic x86-32 one in
include/arch/x86/ia32/linker.ld, with additions to
put symbols into boot and pinned sections.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a flash-based backing store for qemu_x86_tiny board for
testing demand paging. This allows us to test code execution where
.text section is not in physical memory at boot.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, the main stack is not user mode capable
and it would fail k_thread_user_mode_enter() under
app_b_entry(). So create another thread and stack for app_b
as this stack can be used in user mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When demand paging is enabled and not all generic sections are
in physical memory at boot, only tests the permission up to the end
of the pinned section.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This pins the test_page in memory for tests about memory
mapping. This is simply to make sure the whole array
is in physical memory for mapping or else the mapping
function would fail due to having nothing to map.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are quite a few symbols which are needed before the paging
mechanism is initialized. So they need to be pinned in memory
to prevent page fault early in the boot process.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For testing on qemu_x86_tiny, a little bit more stack is needed.
So add the extra stack for testing.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If pinned section is enabled, _k_neg_eagain should be in pinned
rodata section. So add the check if pinned section is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This puts the fatal error handler into pinned sections so
it can be used to handle fatal errors without causing
page faults.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For hardware stack overflow test, pin the whole stack if
demand paging is enabled and generic sections are not all present
at boot. The whole stack may not be in memory at the time of
test, which would result in double fault (exception being
handled + page fault). So make sure the stack is in physical
memory and mapped before doing any tests.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both arch_k_cycle_get_32() and z_tsc_read() are marked inline.
However, compiler may decide not to inline them which would put
them in the generic text section. Pin them in physical memory
as they are frequently used functions to avoid page fault costs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Although they are marked as an inline functions, the compiler
may decide not to inline them which would result in them being
outside the pinned text section. Since these functions are
required for userspace to work correctly, pin them in physical
memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This function should be pinned in memory instead of simply
putting it in the boot section, as this function will be
used when new threads are created at runtime.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If generic section is not present at boot, the thread stack
may not be in physical memory. Unconditionally page in the stack
instead of relying on page fault to speed up a little bit
on starting the thread.
Also, this prevents a double fault during thread setup when
setting up stack permission in z_x86_userspace_enter().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When converting the address and size arguments for extra mappings,
the script assumes they are always base 16. This is not always
the case. So let Python's own int() decides how to interpret
the values as it supports "0x" prefix also.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, it is possible for data pages to not be
present in physical memory. The gen_mmu.py script is updated
so that, if so desired, the generic sections are marked
non-present so the paging mechanism can bring them in
if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If the BSS section is not present in physical memory at boot,
do not zero the section, or else page faults would occur.
The zeroing of BSS will be done once the paging mechanism
has been initialized.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging, the heap object and its backing memory
may not be in physical memory. So initialize those heaps
in pinned region at PRE_KERNEL_1 and the remaining heaps
once paging mechanism has been initialized.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the kconfig to allow reserving a number of page frames
which do not count towards free memory. This is to ensure that
there are enough page frames available for paging code and data.
Or else, it would be possible to exhaust all page frames via
anonymous memory mappings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Although they are marked as an inline functions, the compiler
may decide not to inline them which would result in them being
outside the pinned text section. Since these functions are
required for userspace to work correctly, pin them in physical
memory. This also applies to k_is_user_context().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows memory partitions to be put into the pinned
section so they are available during boot. For example,
the stack guard (in libc partition) is needed during boot
but before the paging mechanism is initialized. Without
pinning it in physical memory, it would fault in early
boot process.
A new cmake property app_smem,pinned_partitions is
introduced so that additional partitions can be pinned
if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During boot process, the boot sections need to be pinned in
memory to prevent them from being paged out (to avoid
pages being paged out and immediately paged in again).
Once the boot process is completed (just before calling main()),
the boot sections can be unpinned so the memory can be
used for demand paging for paging in data pages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If BSS section is not present in memory at boot, it would not
have been cleared as the data pages are not in physical memory.
Manipulating those pages would result in page faults.
In this scenario, zeroing BSS can only be done once the paging
mechanism has been initialized. So do it there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With demand paging and pinned sections enabled, it is possible for
data to be brought into physical memory as required by current
execution context. However, the kernel still assumes that all data
pages are present at boot which may not be desirable for certain
scenarios. This introduces a new kconfig to specify that those
data pages other than the boot and pinned sections are not present,
and they would be paged in on demand.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The beginning of code in do_page_fault() is to pin the page
in memory if it is already present in physical memory.
It is there so that if a page is not present, it can proceed
to perform page-in and then pin it. So the counting of
page faults needs to be moved after the pinning code so
it actually counts page faults, and not counting pinning
operations when the page is already present.
Also clarify the comment on the goto statement as it is not
correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The z_main_stack is needed before paging mechanism is initialized
so put the stack into the pinned section to avoid page faults.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces two new macros K_THREAD_PINNED_STACK_DEFINE()
and K_THREAD_PINNED_STACK_ARRAY_DEFINE() to define thread
stack and thread stack array in pinned section.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In do_page_fault(), the incoming page fault address is not
aligned, and it was unconditionally assigned to the page
frame virtual address field. If the backing store simply
returns the virtual address without processing in
k_mem_paging_backing_store_location_get(), this unaligned
address will be passed to arch_mem_page_out(). On x86,
it is further passed to range_map() which asserts if
the physical address is not page aligned. So align
the address to page size before assigning it to the page
frame virtual address field.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This groups the device state variables in their own linker section.
This is needed for demand paging as these variables are needed
during boot where the paging mechanism has not been initialized.
These variables need to be in the pinned section so they can
be accessed during boot.
Note that if device PM is not enabled, the device state variables
are put into BSS. So we need to pin these.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This attaches a unique section attribute for each mem slab
buffer defined with K_MEM_SLAB_DEFINE(). This allows them
to be placed as needed via linker scripts. This is useful
for demand paging as developers can choose which memory
slab buffer is pinned in memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This attaches a unique section attribute for each kheap
buffer defined with K_HEAP_DEFINE(). This allows them
to be placed as needed via linker scripts. This is useful
for demand paging as developers can choose which can be
pinned in memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new __noinit_named() macro which can be used to
attach named section attributes for symbols. The original
__noinit creates a section attribute with source file name
and a sequential counter. This simply replaces the counter
with the supplied name. This is useful for demand paging
as developers can choose which symbols is pinned memory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce new Kconfig option MCUBOOT_ENCRYPTION_KEY_FILE. If the
string is not empty Cmake will try to encrypt the final binaries using
the given key file.
Signed-off-by: Helge Juul <helge@fastmail.com>
Some GPIO related calls were not being checked for error.
This patch also fixes coverity issue 236651.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related functions were not being checked for errors.
This patch fixes coverity issue 236653.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for errors.
This patch fixes coverity issue 236650.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
gpio_add_callback was not being error-checked. Some other minor cleanups
(rc var to the top, remove redundant log).
This patch fixes coverity issue 236649.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for error.
This patch fixes coverity issue 236648.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some GPIO related calls were not being checked for error.
This patch fixes coverity issue 236647.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the formula used to compute RH/ticks formula according to the Table
9 of the datasheet.
This patch also fixes coverity issue 238360.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the formula that computes T/ticks according to the details found on
Table 9 of the datasheet.
This patch fixes coverity issue 238343.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since periodic advertising chains are available there is
a possibility to send multiple PDUs including CTE in
a periodic advertising event.
This commit enables such functionality in direction finding
transmitter sample.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
STM32U5 support is not yet supported in upstream openocd.
Provide instructions to use STMicro openocd fork as a temporary
workaround.
Additionally, provide openocd configuration to be used for this
target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some targets require no 'halt' to be issued i the gdb server command.
Add a --no-halt option to make it possible.
Keep use of halt as the default case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
I2S direction was not checked correctly in the i2s_nrfx_configure
function.
This patch also fixes coverity issue 238365.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable support for Atmel SAM DAC driver on the following boards:
- sam_e70_xplained
- sam_e70b_xplained
- sam_v71_xult
- sam_v71b_xult
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Enable support for Atmel SAM DAC driver on the following boards:
- sam_e70_xplained
- sam_e70b_xplained
- sam_v71_xult
- sam_v71b_xult
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add Digital-to-Analog Converter driver (based on DACC module) for Atmel
SAM MCU family. Only SAME70, SAMV71 series devices are supported in
this version.
Tested on Atmel SMART SAM E70 Xplained board.
Origin: Original
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This ensures that all mesh settings were removed from persistent storage
after node reset.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds a test checking that a node removes all data from
persistent storage after being unprovisioned.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add sam4l full finite state machine based on Atmel Software Framework.
This allows driver detect protocol errors and sync all requests. This
version is compliance with Linux USB tests.
Note: Tests are timing sensitive and log may affect results.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Fix maximum radio packet size configuration to use 255 bytes
for Extended Scanning and Periodic Synchronization.
Add a Kconfig option so that application can reduce RAM
usage if a specific user scenario can live with smaller PDU
receptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the calculation of auxiliary PDU offset for periodic advertising
AUX_CHAIN_IND PDUs there were used old macro that was removed.
The code didn't compile.
Also there were no support for S2 Coded PHY in the offset calculation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The channels list were originally meant to be used
for multiple bt_iso_chan per iso connect (bt_conn), but
that is not the case for the current API, and won't be
going forward, so the use of the list has been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Delete the "generated_dts_board.h" file which was renamed to
devicetree.h a long time ago and was kept for compatibility.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added missing toolchain name to path for generic.cmake and target.cmake.
Added section explaining the need for, and the use of, the
toolchain/other.h header file.
Signed-off-by: Danny Oerndrup <daor@demant.com>
To ensure that an off-tree toolchain gets the toolchain/other.h header
included, such that it can include the correct header for the
toolchain via the other.h, the define __TOOLCHAIN_CUSTOM__ will be set
when ever the cmake flag TOOLCHAIN_USE_CUSTOM is set.
An off-tree toolchain needs to set the set(TOOLCHAIN_USE_CUSTOM 1) in
the off-tree generic.cmake and/or target.cmake, in order for the
include/other.h to be included. The generic.cmake and target.cmake will
be under ${TOOLCHAIN_ROOT}/cmake/toolchain/${ZEPHYR_TOOLCHAIN_VARIANT}/
As the TOOLCHAIN_USE_CUSTOM is only set for off-tree toolchains, this
has no impact on in-tree toolchains and their functionality.
Fixes zephyrproject-rtos#36117
Signed-off-by: Danny Oerndrup <daor@demant.com>
Add support for setting initial values in bt_vcs_register_param
when registering a VCS service
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Before commit 4f2682bd79
("usb: cdc_acm: avoid spurious interrupt on configured or resume
events") spurious rx-interrupt provided start to read shell tx ring
buffer by CDC ACM UART. Now shell log backend not transmit data,
until CDC ACM UART received data from host.
This PR added invoking interrupt callback if tx interrupt is enable,
when CDC ACM class go to configured state, and flag tx_ready go to true.
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
In case that creating a BIG fails due to missing
ISO channel, cleanup_big would try to access a
NULL pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The default latency (0) is an invalid value (minimum is 5).
Set to 10 to match the connected ISO benchmark.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It enables the usart6 to run the testcase with a DMA
tests/drivers/uart/uart_async_api. DMA2 (of type V1)
is configured on channel 5 (request) streams 7 & 2.
USART Tx and Rx PG14 - PG9 pins (14 & 16 of CN10)
are connected to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Do not include ULL header in LLL, instead values and fields
required in LLL shall be declared in LLL contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While reading the code, find typos in the code commits.
tests:kernel:interrupt:src:dynamic_isr, line 110 and 115.
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
The fs_statvfs function assumes FatFs is configured for a fixed sector
size and therefore may return wrong sector sizes when it is configured
for variable sector sizes instead. Fix that by returning the ssize
variable given in the file system object structure.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
The formatting options, passed to the printk, caused warnings when
compiling for native_posix_64.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit moves the '_ifndef' functions that are implemented in the
"3.1. *_ifdef" section to the "3.2. *_ifndef" section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit extends the `Build system integration` section in the Zephyr
modules guide with a description on how a module may append additional
values to Zephyr CMake lists.
This is useful for modules that might need to append values to the
`SYSCALL_INCLUDE_DIRS` list.
This commit is followup to the discussion found in:
https://github.com/zephyrproject-rtos/zephyr/pull/33756
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Inform that the queue has to be initialized in zeroed memory or with
the k_work_queue_init before use.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
k_work_queue_start receives a struct that is expected to be
uninitialized (zeroed). Otherwise the behavior is undefined.
Following the Zephyr semantics, this pr introduce a new init function
for this struct.
Fixes#36865
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit introduces devicetree API in CMake so that devicetree
properties and register block can be used in the CMake build system.
The script scripts/dts/gen_dts_cmake.py processes the edt.pickle and
generates a corresponding devicetree property map in a devicetree_target
that is then used in CMake.
The following devicetree API has been made available in Zephyr CMake:
- dt_nodelabel(<var> NODELABEL <label>)
- dt_node_exists(<var> PATH <path>)
- dt_node_has_status(<var> PATH <path> STATUS <status>)
- dt_prop(<var> PATH <path> PROPERTY <prop>)
- dt_prop(<var> PATH <path> INDEX <idx> PROPERTY <prop>)
- dt_num_regs(<var> PATH <path>)
- dt_reg_addr(<var> PATH <path> [INDEX <idx>])
- dt_reg_size(<var> PATH <path> [INDEX <idx>])
- dt_has_chosen(<var> PROPERTY <prop>)
- dt_chosen(<var> PROPERTY <prop>)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adds an API to query and visit supported devices. Follows the example
set by the required devices API.
Implements #37793.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add supported device information to the device `handles` array. This
enables API's to iterate over supported devices for power management
purposes.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Force the inclusion of a `DEVICE_HANDLE_SEP` at the end of the
devicetree dependency section of the array. This lets us simplify the
implementation of `device_required_handles_get`, as there is only one
symbol the section ends with.
This does not use any extra ROM as the array is padded out to the
original size with `DEVICE_HANDLE_ENDS` anyway.
Also adds a description of the array format where the array is
instantiated.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Optimize the handles array by making the following observations:
* The devicetree ordinal at index 0 in pass1 is discarded by
gen_handles.py, and therefore does not appear in the pass2 array.
* gen_handles.py does not need `DEVICE_HANDLE_ENDS` to determine the
end of the handle array, as that information is present in the .elf.
Therefore, instead of replacing the devicetree ordinal with an
additional `DEVICE_HANDLE_ENDS` at the end (to preserve lengths), we
can simply move the ordinal to the end and have it be the original
`DEVICE_HANDLE_ENDS` symbol. This reduces the size of the array by
one handle per device (2 bytes).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The runtime API is referenced count and uses a uint32_t.
Avoid underflow when dealing with put requests.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Return 0 in cases where the request does not trigger a device state
change, only incremented or to decremented the reference count.
Fixes#37821
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a new section in the API reference for the newly added
devicetree/pinctrl.h macros.
Amend macros.bnf in the guide to reflect the new generated macros for
getting at pinctrl information by name.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This contains accessor macros for getting phandles out of pinctrl
properties by name and index. As usual, the representation in C for a
phandle is a node identifier.
Add these new macros:
- DT_PINCTRL_BY_IDX(node_id, pc_idx, idx): phandle at index idx
in the pinctrl-<pc_idx> property
- DT_PINCTRL_0(node_id, idx): pinctrl-0 convenience for the same
- DT_PINCTRL_BY_NAME(node_id, name, idx): phandle at index idx
in the pinctrl property named 'name'
- DT_PINCTRL_NAME_TO_IDX(node_id, name): convert a pinctrl property
name to its index number
- DT_NUM_PINCTRLS_BY_IDX(node_id, pc_idx): number of phandles in
pinctrl-<pc_idx>
- DT_NUM_PINCTRLS_BY_NAME(node_id, name): number of phandles in a
named pinctrl property
- DT_NUM_PINCTRL_STATES(node_id): total number of pinctrl-<pc_idx>
properties
- DT_PINCTRL_HAS_IDX(node_id, pc_idx): does pinctrl-<pc_idx> exist?
- DT_PINCTRL_HAS_NAME(node_id, name): does a named pinctrl property
exist?
- DT_PINCTRL_IDX_TO_NAME_TOKEN(node_id, pc_idx): convert a pinctrl
index to its name as a token, similar to DT_STRING_TOKEN()
- DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(node_id, pc_idx): like
DT_PINCTRL_IDX_TO_NAME_TOKEN, but with an uppercase result
As well as DT_DRV_INST equivalents, which take inst wherever node_id
appears above:
- DT_INST_PINCTRL_BY_IDX()
- DT_INST_PINCTRL_0()
- DT_INST_PINCTRL_BY_NAME()
- DT_INST_PINCTRL_NAME_TO_IDX()
- DT_INST_NUM_PINCTRLS_BY_IDX()
- DT_INST_NUM_PINCTRLS_BY_NAME()
- DT_INST_NUM_PINCTRL_STATES()
- DT_INST_PINCTRL_HAS_IDX()
- DT_INST_PINCTRL_HAS_NAME()
- DT_INST_PINCTRL_IDX_TO_NAME_TOKEN()
- DT_INST_PINCTRL_IDX_TO_NAME_UPPER_TOKEN()
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We need to be able to access pinctrl-<index> property contents by
name, convert names to indexes, convert indexes to names, and perform
existence checks by name and by index.
This is currently not possible because we don't track these properties
the same way we do other named properties. That in turn is because
they are different then the usual named properties.
The usual case looks like this, picking DMAs just for the sake of
example:
dmas = <&dma0 ...>, <&dma1 ...>;
dma-names = "tx", "rx";
So "tx" is the name for the <&dma0 ...> element, and "rx" is the name
for the <&dma1 ...> element, all in a single "dmas" property.
By contrast, pinctrl properties look like this:
pinctrl-0 = <&foo &bar ...>;
pinctrl-1 = <&baz &blub ...>;
pinctrl-names = "default", "sleep";
Here, "default" is the name for the entire pinctrl-0 property.
Similarly, "sleep" is the name of the pinctrl-1 property. It's a
strange situation where the node itself is kind of a container for an
array of pin control properties, which Zephyr's bindings language
can't really capture and has some special case handling in edtlib.
This is easiest to handle with ad-hoc code. Add special case macros
for pinctrls.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the partition handling code into its own function and rework the
comment. This is prep work for adding additional generated macros to
this function.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the IDT_LIST memory region to the location recommended by
`intlist.ld`. The documentation specifies that this region should not
overlap other regions, and there is no guarantee that the area after the
`SRAM` region is not used. The end of the address space is much less
likely to be a valid RAM address.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the IDT_LIST memory region to the location recommended by
`intlist.ld`. The documentation specifies that this region should not
overlap other regions, and there is no guarantee that the area after the
`SRAM` region is not used. The end of the address space is much less
likely to be a valid RAM address.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Removed implementation that used memcpy of received PDUs and
instead using the free Rx buffers; use the scratch PDU for
transmitting scan requests and connection requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the lll_prof_reserve and lll_prof_reserve_send profiling
functions to use when profiling active scanning and
initiator.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
llcp.conn_param.ack was reset on tx of conn param rsp, however this
should only be done once the expected conn update ind is received
and sets the cu.ack flag to indicate cu procedure 'takes over'.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The newly added CMake installation instruction incorrectly specified
*double* colon (literal block) instead of *single* colon after its list
item.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
These constants are based on (i.e. exactly as) the
recommended values for regular (i.e. non-periodic)
advertising.
The GAP spec does not actually specifiy these numbers (or any
numbers for periodic advertising), but they are sane
numbers to use for periodic advertisement.
The issue with using the non-periodic advertising
whereas the peridic advertising unit is 1.25ms.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix missing implementation to release Auxiliary PDU chains
and then resume back to scanning on primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add PDU time calculation macro for S2 and S8 Coded PHY.
Rename PKT_AC_US to PDU_AC_MAX_US.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing range delay value when calculating the header
complete timeout value for the reception of extended scan
response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the received coding scheme when scanning for correctly
calculating the receive chain delay and on-air PDU time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The RISC-V Platform-Level Interrupt Controller (PLIC) was moved from the
RISC-V Privileged Specification v1.11 to a separate specification
(see https://github.com/riscv/riscv-plic-spec).
Reflect this by not automatically enabling the PLIC interrupt controller
driver for all RISC-V privileged SoCs, but only for SoCs with the
CONFIG_RISCV_HAS_PLIC Kconfig option enabled.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
After 31045c7 was merged, it was possible to use broadcast
iso without CONFIG_BT_CONN, but it did not properly handle
TX as there were missing support to read the buffer
size from the controller, as well as missing support
for handling the number of completed packets event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change so that num_completed_packets event handling is also
enabled for broadcast ISO only builds. This is because sending
data on a broadcast ISO still generates this event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the function out of the ACL group as it may be used
for broadcast ISO only builds.
er 31045c7 was merged, it was possible to use broadcast
iso without CONFIG_BT_CONN, but it did not properly handle
TX and RX as there were missing support to read the buffer
size from the controller, as well as missing support
for handling the number of completed packets event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Define soc_interrupt_init as a weak symbol in the common RISC-V
privileged instruction set SoC support.
This allows overriding soc_interrupt_init for SoCs which are not fully
compliant with the RISC-V privileged specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Define __soc_handle_irq as a weak symbol in the common RISC-V privileged
instruction set SoC support.
This allows overriding __soc_handle_irq for SoCs which are not fully
compliant with the RISC-V privileged specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit updates the `arm_no_multithreading` test to run on the
recently added `mps3_an547` board.
The `mps3_an547` SoC includes the Cortex-M55 processor which implements
the ARMv8.1-M architecture that is not covered by any of the boards in
the current "allowed platforms" list for this test.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes the FPSCR register initialisation validation test
for the ARMv8.1-M architecture.
For ARMv8.1-M, the newly added LTPSIZE field in the FPSCR may always
read the value of 4 when the M-Profile Vector Extension (MVE) is not
implemented or FP context is not active, so we must ignore its value
when validating the FPSCR register initialisation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit fixes the FPSCR register initialisation validation test
for the ARMv8.1-M architecture.
For ARMv8.1-M, the newly added LTPSIZE field in the FPSCR may always
read the value of 4 when the M-Profile Vector Extension (MVE) is not
implemented or FP context is not active, so we must ignore its value
when validating the FPSCR register initialisation.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The IPC drivers rpmsg_service and rpmsg_multi_instance are not
explicitly enabling the RX IPM channel when two different devices are
used for TX and RX. While this could be redundant for some IPM drivers,
in some cases the hardware needs to be enabled before using it.
Add the missing calls to ipm_set_enabled() for both the devices.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This became useless when _init_tokens() was refactored not to use
global variables (in "dtlib: use IntEnum for token IDs"), and the
linter is complaining about it now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Similarly to what was done for dtlib, use f-strings in places where it
improves readability. Some places, e.g. __repr__ methods that
construct a string using something like
"<SomeType, {}>".format(", ".join(...))
are better left off as-is.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The library was originally developed before Python 3.6 was the minimum
supported version. Use f-strings now that we can do that, as they tend
to be easier to read.
There are a few places where str.format() makes sense to preserve,
specifically where the same argument is used multiple times; leave
those alone.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There were missing commands in local supported commands list that
are related with connectionless direction finding.
The commands are implemented but they haven't been added
to HCI_Read_Local_Supported_Commands list.
The commit fixes that.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The mps3_an547 board documentation incorrectly referred to the
Ethos-U55 coprocessor as an FPU (floating point unit) when it is really
an NPU (neural processing unit).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This adds a very primitive logic to allow linking a prebuilt
static library of kernel code instead of building the kernel
from source. Note that the library is built with a specific
set of kconfigs, and they must match when building applications,
or else there would be mysterious crashes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Microchip MEC172x series I2C driver implementing controller
and target modes. The driver implemenents its own I2C port
pin control functions and does not depended upon pinmux. Future
updates will make use of PINCTRL when that subystem is finalized.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The device pm actions (low_power or suspend) were switched. Also,
added SOFT_OFF to the suspend action.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Suspend devices when the system goes to STATE_SOFT_OFF.
This state was not triggering any device power management. This should
at least suspend devices as it is done for SUSPEND_TO_RAM and
SUSPEND_TO_DISK.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Enables the dma driver on the mimxrt1064_evk board. The board
documentation is not updated because it already mentions dma driver
support.
Tested with:
- tests/drivers/dma/chan_blen_transfer
- tests/drivers/dma/chan_link_transfer
- tests/drivers/dma/loop_transfer
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the watchdog driver on the mimxrt1064_evk board. The board
documentation is not updated because it already mentions watchdog driver
support.
Tested with tests/drivers/watchdog/wdt_basic_api
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
stm32cube: update stm32f1 to version V1.8.4
stm32cube: update stm32f2 to version V1.9.3
stm32cube: update stm32f4 to version V1.26.1 V1.26.2
stm32cube: cleanup stm32f7 version V1.16.1
stm32cube: update stm32g0 to version V1.5.0
stm32cube: update stm32wl to version V1.1.0
stm32cube: update stm32f0 to version V1.11.3
stm32cube: update stm32f3 to version V1.11.3
stm32cube: update stm32l0 to version V1.12.1
stm32cube: update stm32l1 to version V1.10.3
stm32cube: update stm32wb to version V1.12.0
(including ble library update)
stm32cube: common_ll: Regeneration after cube updates
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
After update of stm32 cube l1 V1.10.3,
SPI_CR2_FRF doesn't exist for all stm32L1 MCU,
thus LL_SPI_SetStandard() is also not defined for all stm32l1 MCU.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Commit c79b1a38aa ("samples: display:
Convert driver and lvgl sample.yaml to use depends_on") started using
depends_on in the sample YAML for a lvgl application instead of
platform_allow.
This breaks build testing with twister and overflow checking enabled
on more resource constrained platforms. The test case's .config
ends up with:
CONFIG_LVGL_HOR_RES_MAX=320
CONFIG_LVGL_VER_RES_MAX=240
CONFIG_LVGL_VDB_SIZE=64
CONFIG_LVGL_BITS_PER_PIXEL=24
And lib/gui/lvgl/lvgl.c, where we allocate a buffer of size:
(CONFIG_LVGL_BITS_PER_PIXEL *
((CONFIG_LVGL_VDB_SIZE * CONFIG_LVGL_HOR_RES_MAX *
CONFIG_LVGL_VER_RES_MAX) / 100)
/ 8)
Require 147456 bytes to build the sample, ultimately overflowing RAM
if you run something along the lines of:
twister -T samples -p <constrained_platform> --overflow-as-errors
This is a reasonable test to be doing to make sure that sample RAM
requirements do not get too big for a subset of platforms that are of
interest, and it no longer works.
To fix it, add a min_ram line for this case so that we can still run
overflow tests on a large set of samples without fine-grained special
casing or creating an ever-growing list of platform excludes for this
test.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The units for these testcase YAML fields are missing, making it
unclear how to use them. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Using 3rd Party Toolchains page find out that warning message
can be moved to the top of the page.
Add Windows example in OneAPI.
Style fixing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This adds basic support for the Silabs Si7210 hall effect magnetic
position and temperature sensor. It is able to get magnetic field and
temperature in the default scale of the sensor (depending on the
variant). It also supports going into sleep mode without measurements
through the device power management infrastructure.
It is most notably missing support for scale change, measurement
averaging and filtering, and alert pin configuration (threshold,
hysteris, tamper).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
the correct value is returned when using sensor channel get function to
read z-axis value
Signed-off-by: Vojislav Milivojevic <milivojevicvoja@yahoo.com>
Move the implementation of scan trains after call to LLL
prepare, so that LLL prepare executes without any latency.
To increase radio utilization, LLL prepare should be
scheduled as early in the `ticker_cb` of the radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the return value use to indicate unassigned auxiliary
context when scanning is using LLL scheduling. This can
happen only under LLL scheduling where in LLL auxiliary
channel PDU reception has been spawn from LLL primary
channel scanning and on completion will join back to resume
primary channel PDU scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Keep the default AD Data length to Bluetooth Specification
defined minimum of 31 octets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While reading the code, found some typos in the code comments,
line 226 and 668.
Fix comments to make it more solid.
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
Reduce interval of warning timer, so we can print more
warning messages (ex. MEPC, task ID...) before watchdog reset.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
We add disable event timer at the beginning of critical section
for two reason:
1.For K_TICKS_FOREVER case: since no future timer interrupts
are expected or required, so we disable the event timer.
2.Others case: according it81202 spec, when timer enable bit
from 0->1, the timer will reload counts and start countdown.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Update the connected ISO API to be more
similar to the broadcast ISO API as well
as the HCI spec.
This updated API allows for more flexibility
and will better support scenarios such as true
wireless setup, as ISO channels and connections
are more independent now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix implementation to not to put back the primary channel
scanning to resume state when Extended Scan has used ULL
scheduling which pre-empts the scan window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig options that allow users to select the way the APPROTECT
mechanism is handled in the SystemInit() function.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes accelerometer_handler.cc to import correct header
with TfLiteStatus since c_api_internal.h file was deleted in
the new standalone tflite-micro repo.
Removes import of version.h in main_functions.cc to match
tflite-micro version.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Changes name of folder from tensorflow to tflite-micro and updates docs
to reference TensorFlow Lite Micro specifically instead of TensorFlow.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Updates west manifest and module folder name to point to new
TensorFlow Lite Micro repo Google recently pulled out of
the TensorFlow repo.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Suppress violation, because it is a deliberated deviation.
Noticed, that my previous PR #36420 comments were not correctly
detected by a static analysis tool. Only the first one item
"MISRAC2012-RULE_20_4-a" was detected and suppressed.
Change comment style, so each item will be suppressed.
Comment style defined in PR #36911 as the most suitable
for the analysis tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Currently the default runner of nsim_hs_smp is mdb,
the runner of other nsim platform is nsimdrv, user
can't change the default runner unless he uses
west command(--runner).
With this change cmake will choose runner according
to BOARD_DEBUG_RUNNER or BOARD_FLASH_RUNNER. so if
add -DBOARD_FLASH_RUNNER=mdb-nsim or
-DBOARD_DEBUG_RUNNER=mdb-nsim to cmake command,
the apllication will be run with mdb.
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Following change of HSE clock binding, remove hse-bypass
which is no longer an option and replace it with hse-tcxo
which is the configuration closest to previous status.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32WL, HSE clock can take 2 specific options:
-hse-tcxo
-hse-div2
Enable support for these options.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32WL features a specific HSE clock with dedicated properties.
Add a dedicated binding and update STM32 clock control driver
header to take it into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move this to where priorities are being discussed to keep things in
context and to have all priority types documented in 1 place.
Fixes#21648
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reapply the part of 4b5cd92312
that added new functionality/fixed the actual issues described
in the original commit message withtout the further cleanup.
There was also some cross-commit content from
2b91ebe16e
as part of the cleanup in test_friendship.c which is also included.
+ added cleanup also to test_provision.c on request from Aleksandr.
Original commit msg:
-----------
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
-----------
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This reverts commit 4b5cd92312.
global_device_nbr is used by many bsim tests.
And many of those are now off tree in preparation of the LE-Audio
work. Removing this for cleanliness now is not nice on others.
=> Revert
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The test checks the resistance of ble mesh stack to replay attack.
Replay protection cache shall store seqAuth last frames.
Device shall filter out such messages on the transport layer.
Power on\off sequence shouldn't impact that
since replay protection cache is stored in settings subsystem.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The conversion to devicetree seems to be half lost
for this driver. There are already bindings and nodes for
compatible "altr,jtag-uart", update driver to use it.
Remove last mention of CONFIG_UART_CONSOLE_ON_DEV_NAME.
Resolves#37207
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Update USB configuration and test case.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow UART driver that offload interrupt processing
to workuqueue, like CDC ACM UART to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Enable USB device support because the board uses
CDC ACM UART for console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add hidden Kconfig option to Kconfig.cdc and allow
to configure CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Current USB device controller drivers (drivers/usb/device)
do not use DEVICE_DT_GET but the properties from devicetree,
and USB device controller node is parent for CDC ACM UART and
AUDIO children nodes.
Add USB device controller binding and node to keep the samples
building for native_posix driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB samples to be build.
Follow up on commit e4f89478
("boards: add zephyr_udc0 nodelabel to all boards with USB support")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This adds an example application for the TI INA219 Zero-Drift,
Bidirectional Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This adds support for the TI INA219 Zero-Drift, Bidirectional
Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This commit adds support for the Legend 3.5" board revision.
This board revision is found on the Seagate FireCuda Gaming
Hub and Gaming Drive Hub for Xbox devices. It contains the following
hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
- A PWM LED connected on TIM3 CH3
- An external 24 MHz oscillator
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds support for the Legend 2.5" boards (legend25_ssd and
legend25_hdd) based on the STM32F070CB MCU. These boards can be found in
the Seagate FireCuda Gaming Drive, Gaming Drive for Xbox, SSD Gaming
Drive for Xbox, and Gaming Drive for PlayStation devices. Both boards
contain the following hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
The Legend 2.5" HDD board also contains an activity LED connected on
TIM3 CH3
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Like the first instance of the dma in the stm32l3xx soc,
the second DMA instance of the stm32f373 is of the same type
V2bis (dma request is fixed (no dma-slot).
The dma-cell has channel and config.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Simplify implementation that clears extended scan response
data by moving the length check after the new PDU buffer
has been correctly initialized.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check to validate PHY value in the Auxiliary Pointer
structure in the common extended header format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt_sdp_get_add_proto_param is used to get the protocol
parameter from Additional Protocol Descriptor List.
In order to implement it, one parameter
(proto_profile_index) is added to sdp_get_uuid_data_index
to get the indexed item.
Fix one bug in sdp_get_uuid_data because there may be more
than 2 consequent "seq len item".
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
ARC MWDT doesn't support building Zephyr as an native
application (CONFIG_NATIVE_APPLICATION).
ARC MWDT doesn't support building with CONFIG_NEWLIB_LIBC
as it doesn't have newlib.
Let's explicitly forbid to use these Kconfig options for the
MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Fix include path of headers provided by MWDT toolchain for the
case of MWDT C/C++ lib usage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
As of today we have libraries provided by MWDT build with
stackcheck enabled. So we have to provide dummy
_fstack, _estack to make it working.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ring buffer's static declarations now declare the
ring buffer's data as __noinit, to avoid unnecessary
initialization of the buffer.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The scanner should not cause a device to crash or malfunction
if invalid packets are received.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When using both test-only and retry-failed flags, all tests would be
added to the test queue regardless if they failed or not. This commit
updates the logic to process test-only runs similar as other runs,
by adding tests to the queue with the 'run' operation directly.
Signed-off-by: Andreas Vibeto <andreas.vibeto@nordicsemi.no>
Now that the infrastructure we need is in place, we can allow every
element of DTS_ROOT to have its own dts/bindings/vendor-prefixes.txt
file instead of just special-casing ZEPHYR_BASE (which is always in
DTS_ROOT).
This treats all modules equally and eases out of tree management of
downstream-specific vendor prefixes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's a bit weird to loop over the same list twice like this.
Just unify the two loops into one.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Allowing multiple such files will let higher layers take inputs from
multiple DTS_ROOT directories. This in turn will allow out of tree
bindings to manage their own sets of prefixes without patching
upstream Zephyr's file or doing other similar hacks.
Parse each file into a dict, and merge those dicts into a single
dictionary for the EDT constructor.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If the user passes None, set the internal attribute to an empty dict
instead. This lets us avoid some None checking and simplifies things
without changing semantics -- if the user *does* pass an empty dict,
the results are the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a common extension for YAML files. We don't have to allow it
in upstream zephyr, but we should allow downstream DTS_ROOTs to have
this ability.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a build assert if the device name has been misconfigured. The device
name has a max length of 248. When configured as dynamic make sure that
the initial device length can fit in the dynamic max length.
This prevents us from having to handle length overflow when setting
device name in advertising data which has an 8-bit length field.
Log a warning if failing to set the device name in bt_enable.
Remove unused defines in the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix adv-data command when given arbitrary advertising data in
hexadecimal format. The data_len field should contain the length of the
data which does not include the data type. Instead the AD len field in
the data was given. This caused the AD len field to be increased by 1
in the advertising dat.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In the case where keys are distributed on an unencrypted link,
we got the following call trace:
- bt_smp_recv()
- smp_error()
- smp_pairing_complete()
- bt_conn_security_changed()
- smp_pairing_complete()
- bt_auth->pairing_failed()
- smp_reset()
- bt_auth->pairing_failed()
- smp_reset()
To avoid the second call to bt_auth->pairing_failed()
we validate the that smp flags before calling the callback.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
esp32c3 has already supported RISC-V GP, just apply new kconfig option
to it. Forcely select CONFIG_RISCV_GP in esp32c3 at first because it
seems to be necessary in the esp32c3 SoC.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add norelax option before initializing GP at common entry point.
Remove __global_pointer$ symbol in the SoC linker script because it's
in the arch one. Remove -mno-relax when GP support is enabled.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Initialize GP at common entry point of riscv-privilege SoCs so that
this commit add GP support of these SoCs at once.
As some privilege SoCs want to customize the entry point, they should
disable linker relaxation by `.norelax option` before entrying the
common entry point `__start`.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Enable RISC-V GP relative addressing by linker relaxation to reduce
the code size. It optimizes addressing of globals in small data section
(.sdata).
The gp initialization at program start needs each SoC support. Also,
if RISC-V SoC has custom linker script, SoC should provide
__global_pointer$ symbol in it's linker script.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Coding scanning tool raises a violation that happens dereferencing
of the "work" pointer in the expression "work->handler"
As were discussed before in PR #35664 it is not true.
Add explanation comment, because static code analysis tool
raised false-positive violation there.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Creating static libraries for drivers moves some symbols out of IRAM.
This change fixes it.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
bugfix: NULL termination is required by
dns_resolve_reconfigure API so null terminate the DNS
server list.
Fix checkpatch warning.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Include sys/atomic.h instead of sys/atomic_builtin.h, so that build for
platforms with non-default atomic implementation will still succeed.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
(Re)setting the connection handle in hci_disconn_complete
should not be done as the handle are used for
logging/debugging purposes after this, and makes it
impossible to lookup the handle of disconnected
connections.
The connection handle is set to 0 during bt_conn_new
in any case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
No initialisation will lead to undefined behaviour in check for
BT_L2CAP_RECONF_INVALID_MPS.
This is affecting L2CAP/ECFC/BV-23-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix missing synchronization when stopping primary and
auxiliary PDU scheduling.
Added implementation to ensure primary and auxiliary event
count match when terminating extended advertising on maximum
number of events or on duration.
Fixes#37571.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Max events and duration parameter are not used in high duty
cycle directed, hence correctly initialized them and not
depend on the caller of advertising start API to set them
to zeroes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increases the friendship unseg app payload size in the friend message
test and enables asserts to test the error described in #37519.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
unseg_app_sdu_decrypt decrypts messages in place using a single net_buf.
While this is safe in terms of data access, the buffer state is
manipulated with the assumption that they're two different buffers, and
the output buffer's length field is increased at the end. When
assertions are enabled and the pdu length is 11 or 12 bytes, this
triggers the net_buf length assert, as the decrypt function attempts to
add the pdu length to the out buffer, with the assumption that it was
reset before decryption was started.
Create a separate output buffer with len = 0 to avoid triggering the
assert. Improve readability of the unseg_app_sdu functions to highlight
the need for the additional buffer.
Fixes#37519.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Allow the application to configure the advertiser as scannable when it
does not provide scan data in the call to bt_le_adv_start. This makes it
possible for the application to later add scan response data in the
bt_le_adv_update_data call.
This aligns the legacy code path with the extended code path which
already had this behavior.
This also stops a directed connectable advertiser from being marked
internally in the host as scannable. This appears to not have been
causing any issues.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document the behavior of the include name option when this is changed by
updating the advertising parameters of the advertising set.
In this case we cannot update the advertising data since the host does
not have a copy to modify. The application will have to do update with
its current advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix non-connectable advertiser configured as ADV_SCAN_IND when
configured by application to have the device name appear in the
advertising data instead of the scan response data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Disallow creating an extended scannable advertiser with the device name
configured to appear in the advertising data.
This would fail in either the call to bt_le_ext_adv_start or
bt_le_ext_adv_set_data when the host would try to set advertising data
in the controller.
Instead this now fails in the bt_le_ext_adv_create call.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
net_buf_skipcrlf() will remove all \r\n characters from the buffer.
If the data after CONNECT\r\n contained \r or \n it would
be removed, resulting in dropped data.
Fix this to only remove two bytes to ensure data is not dropped.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Change socket RX trailer (EOF) missing to warning and
keep socket RX data instead of discarding.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Add support for passing the --config argument to the openocd west runner
multiple times.
This allows for using modular openocd configuration files (e.g. CPU core
configuration in one file, independent of the selected JTAG interface
type).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
So far pcie_get_mbar() has been the only way to retrieve a MBAR. But
it's logic does not fit all uses cases as we will see further.
The meaning of its parameter "index" is not about BAR index but about
a valid Base Address count instead. It's an arbitrary way to index
MBARs unrelated to the actual BAR index.
While this has proven to be just the function we needed so far, this has
not been the case for MSI-X, which one (through BIR info) needs to
access the BAR by their actual index. Same as ivshmem in fact, though
that one did not generate any bug since it never has IO BARs nor 64bits
BARs (so far?).
So:
- renaming existing pcie_get_mbar() to pcie_probe_mbar(), which is a
more relevant name as it indeed probes the BARs to find the nth valid
one.
- Introducing a new pcie_get_mbar() which this time really asks for the
BAR index.
- Applying the change where relevant. So all use pcie_probe_mbar() now
but MSI-X and ivshmem.
Fixes#37444
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This sets the dts of DMA for using pn the uart 2 i.
The stm32h723 has a DMAMUX and request are 44 and 43 for usart2
The Tx&Rx pins PD5 and PD6 of the usart2 are connected
on the nucleo_h723zg board to pass the test
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is the configuration of the stm32h723 where the
dma1 & dma2 of type V1 with a MUX. Even if DMA is of type V1,
the 'feature' does not exist with DMAMUX
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This enables defines the usart2 on PD5, PD6 pins
of the nucleo stm32h723zg target board. Pins are available
on the CN9 pin6 & 4 of the MB1364 nucleo144
Signed-off-by: Francois Ramu <francois.ramu@st.com>
There is a problem with the previous method, that is,
we use the same label(bt_mesh_subnet_cb_subnet_evt) and
put it in the same section, which is not friendly for debugging.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This prevent the new thread to attempt accessing cached ptable entries
which are no longer valid.
Signed-off-by: Manuel Argüelles <manuel.arguelles@coredumplabs.com>
Use 0.11.1 to build the docs. The docstrings are the same as 0.11.1a1,
so it doesn't make a difference in the output, but let's keep things
clean now that the final release is up.
Fix typos in the release notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
- Fixe reversed UART TX/RX pins info
- Added info about CONFIG_FPU in case of Telink's toolchain
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
The RT1170 platform adjusted the result parameter in the callback
function to be a uint64_t. The adjustment is to conditionally change
the callback definition and then cast the result value to a size that
fits the reported values across the various SOCs.
With error results, cast result to uint64_t and modified the called
function to print a uint64_t value.
With the RX/TX status, result is a MB value that doesn't exceed 64
so the result value is cast down to a uint32_t.
Fixes#37691
Signed-off-by: David Leach <david.leach@nxp.com>
With the change to cmake_minimum_required(VERSION 3.20.0) then this
commit is no longer needed.
This reverts commit 6ca2bf25cb.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update docs to reference CMake 3.20.0 as minimum required version.
Added Kitware APT repository to the getting started page.
Updated installation Linux download descriptions from CMake 3.15.3 to
CMake 3.21.1 as that is the version currently being installed when
using the Kitware APT repository.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
CMake >=3.20 requires file extensions explicitly added to source files.
See CMP0115:
> Starting in CMake 3.20, CMake prefers all source files to have their
> extensions explicitly listed:
This manifest update pulls in update for the lvgl module adding missing
extension.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is necessary to get some samples to link properly when moving
from device_get_binding() to DEVICE_DT_GET and friends. In particular
I ran into issues building i2c_fujitsu_fram without a real I2C device.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
1. Update soc.c file to add USB clock setup
2. Add a linker script file to move USB transfer
buffer and controller buffers to USB RAM
3. Update Kconfig's to add USB support
4. Add zephyr_udc0 nodelabel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update soc.c file to add USB clock setup
2. Add a linker script file to move USB transfer
buffer and controller buffers to USB RAM
3. Update Kconfig's to add USB support
4. Add zephyr_udc0 nodelabel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The USB config name has changed to USB_MCUX and the
device tree node name has changed from nxp_kinetis_usbd
to nxp_mcux_usbd
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Add support for NXP LPC USB controller
2. Do not check the return value from the
kUSB_DeviceControlRun command as not all SDK drivers
return a value
3. Use the kUSB_DeviceControlPreSetDeviceAddress
command to set device address
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Clarify the PWM pwm_pin_set_cycles() function API details.
The API aims for synchronous (glitch-free) updates of the PWM period and
pulse width, but not all PWM controllers support this.
Similarly, the API aims for independance between channels on
multi-channel PWM controllers, but not all PWM controllers support this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses reference to zephyr_udc0 and remove
board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB devicetree nodes in Zephyr have different names,
mostly derived from the designations in data sheets.
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB sample to be build.
Follow up on commit b4242a8 ("boards: add USB node aliases")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update periodic advertising data update rate. The periodic advertiser
is configured with a periodic advertising interval of 2.4 seconds but
updating the data every second. This leads to many of the advertising
data values not being sent at all.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a test to check value of the IV Update
counter at the time of provisioning based on
the status of IV Update flag. Also ensures that
the counter is reset if the mesh stack state
is reset.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When device is first provisioned with IV Update
flag is set to 0, it should wait for minimum of
96 hours before going into IV Update In Progress
state. Such limit does not apply, if device is
provisioned with IV Update flag is set to 1.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
This commit tests persistence storage for access layer:
- Model publication
- Model subscription
- Model app keys binding
- Model data
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commits fixes an issue where an existing entry in a settings file
causes settings file corruption when storing new value.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Name length can't be longer than 8 bytes. This needs to be clarified
in the bt_mesh_model_data_store() documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Change the fail handling of setting the CIG parameters
(or when allocating the CIS) to unref the ISO conns
instead of calling cleanup on them directly.
This fixes an issue that if the CIG parameters failed,
then the iso conns would not be unref'ed and we could
not try again.
Unref'ing an iso conn will call cleanup once it hits 0
refs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A channel should only be allowed to unbind when in
the BT_ISO_BOUND state. If it is in a disconnected state,
then it the function would have meaning. If it is a connected
state, unbinding it would generate an error when removing
the CIG, which would fail silently.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable PWR clock unconditionally for L4, L5 and U5
like it is done on other stm32 series
Fixes#37781
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This is now failing an edtlib check for unknown vendor prefixes.
I can't find a reason to use a vendor prefix in application-local
bindings like this, so just remove it wherever it appears by
normalizing to test-foo-compat instead of test,foo_compat or
test,foo-compat.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Increases the default CONFIG_TEST_EXTRA_STACKSIZE for the 32-bit RISC-V
architecture. This fixes the portability.posix.fs test on the
qemu_riscv32 platform.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add unit tests for HCI commands:
- HCI_LE_Set_Connection_CTE_Receive_Parameters,
- HCI_LE_Connection_CTE_Request_Enable.
Tests validate current implementation of commands handling in HCI/ULL.
Handling of the HCI_LE_Connection_CTE_Request_Enable is not complete,
thus tests don't validate positive behavior the functions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
LE Set Connection CTE Receive Parameters HCI command size may not fit
into HCI TX command buffer size, which default value is 65 bytes.
For platforms other than Nordic there may be up to 75 antenna IDs
put into the command.
Added new default value for SOCs not compatible with Nordic to
extend default TX buf size to 83 bytes (75 bytes for antena IDs,
5 bytes for other command parameters, 3 bytes for command header).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add functions that handle enable CTE request control procedure
request from host.
Implementation of ll_df_set_conn_cte_req_enable in ULL is partial.
It will be integrated with refactored implementation of control
procedures.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add struct ll_df_conn_rx_params sturcutre to struct lll_conn.
This is storage for parametrers required to configure radio
for CTE reception in connected mode by lower link layer.
Add required includes to make the controller code compilable
after change struct ll_conn.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Set_Connection_CTE_Receive_Parameters handling is required to
enable sampling of Constant Tone Extension in connected mode.
The commit adds handling for HCI_LE_Set_Connection_CTE_Receive_-
-Parameters command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add struct ll_df_conn_rx_params sturcutre to struct ll_conn.
This is storage for parametrers required to configure radio
for CTE reception in connected mode.
Add required includes to make the controller code compilable
after change struct ll_conn.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new strcture type for storage of CTE receive parameters.
The structure will be used in to store parameters for connected mode.
The parameters provided by HCI commands for receiving CTE
in connected mode and disconnected mode are a bit different.
There is common subset of parameters but extraction of those
into common structure would increase of size of other stuctures
that aggregate them.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Code related with connected mode was in middle between connectionless
RX and TX. Moved to the bottom of the file.
Added missing compilation guards for ll_df_set_conn_cte_tx_params.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add features: connection CTE request, connection CTE response
and receiving constant tone extensions; to HCI and features
supported by controller.
The features are not enabled yet.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Compute the SHA256 hash of the downloaded image and compare that with
the hash in the deploymentBase to guarantee that only the correctly
downloaded image will be flashed.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Use a semaphore to prevent the hawkbit_probe from running more than once
at the same time since it reset the hawkbit context on entry and will
affect other running instance.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix multiple typos and make the sample's log output consistent
with the subsys.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Co-Authored-By: Sylvio Alves <sylviojalves@gmail.com>
The delay will ensure last byte has been latched in before
This also change the method of reading status register from re-send
read status command on each read to read status register continuously.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
When there is no grove sensor driver enabled, cmake warns
that the library has no sources. Fix that by adding
a new kconfig to be used by CMake to selectively
include the grove directory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When there is no sensor driver enabled, cmake warns that
the library has no sources. Fix that by wrapping cmake
library instructions inside kconfig.
Fixes#37765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When there is no console driver enabled, cmake warns that
the library has no sources. So only include the console
directory when CONFIG_CONSOLE is enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
log and libc optimization default config are soc related
and should be moved out from board context.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add workaround for no command buffer available when the host is
transmitting Host Number of Completed Packet Commands.
This command does not follow normal flow control of HCI commands and
the controller side HCI drivers that allocates HCI command buffers with
K_NO_WAIT can end up running out of command buffers.
Increase the command buffer count from 2 to 10 for the HCI uart driver
until the issue has a proper fix
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This reverts commit 7b09d031fa. Because
context save of GP register is removed, we don't need to initialize GP
at thread init. GP will be a constant value so that it could only be
initialized at program start.
Signed-off-by: Jim Shu <cwshu@andestech.com>
RISC-V global pointer (GP) register is neither caller nor callee
register, and it's a constant value in the single ELF file. Thus, we
don't need to save/restore GP at ISR enter/exit. Remove it to optimize
context switch performance.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In commit 00f9503293 to make
k_current_get() work without syscall, a new z_current_get()
was introduced since there are times when thread local
storage has not been initialized. However, this was not
marked with const attribute the same as k_current_get().
This may result in slower compiled code as each call to
z_current_get() may actually need to go through the whole
function call process instead of reusing the result from
previous call in the same scope. So add const attribute
to z_current_get() to restore the old behavior.
Fixes#37460
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Document the change in behaviour for `lora_send` and how to get back
the original behaviour.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Detect failed transmissions using `lora_send` by only waiting for some
multiple of the actual on-air time before giving up.
We use this instead of the inbuilt TxTimeout functionality because the
value of this timeout is set by `lora_configure`, and therefore doesn't
change with different packet lengths. This is a limitation of the
underlying `RadioSend` function, not the Zephyr driver.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Change the behaviour of `lora_send` to block until the transmission
completes. The current asynchronous behaviour is exposed through the
new function `lora_send_async`. This naming convention brings LoRa in
line with other asynchronous subsystems.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
1. Do not throw an error when FSL_FEATURE_USDHC_HAS_HS400_MODE
is defined
2. Add support for the case when the card detect is handled
by the USDHC module
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The commit applies changes that are required by update of ELM Chan's
FAT FS driver update to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit updates revision of the Zephyr for of ELM Chan FAT FS
driver to the revision that updates source code to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing EGU nodes. We already have a compatible for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing EGU and TIMER nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing RADIO and EGU nodes. We already have compatibles for these
defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing FICR, UICR, RADIO, and EGU nodes. We already have
compatibles for these defined, and the peripherals are present, so
define them for consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add missing FICR, UICR, RADIO nodes. We already have compatibles for
these defined, and the peripherals are present, so define them for
consistency across SoCs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The way we currently handle direction finding extension (DFE) support
on Nordic nRF5 controllers relies on required devicetree properties
related to DFE in the "nordic,nrf-radio" node.
That doesn't make sense on radios without DFE support, though.
Any .dtsi for an SoC without DFE support which has such a node would
require extraneous DFE related properties like dfe-antenna-num.
Instead of making the properties required, mark them optional. We
indicate the presence of DFE support via a new 'dfe-supported' boolean
property which the SoC .dtsi files can set (or not) depending on
support.
This gives us the opportunity to do some cleanup in the Kconfig,
removing CONFIG_HAS_HW_NRF_RADIO_BLE_DF since we know from the
devicetree whether DFE support is available.
Handle that change appropriately in radio_df.c. This gives us an
opportunity to improve readability in the devicetree-related macro
magic in that file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The documentation for Bluetooth Direction Finding Extension (DFE)
samples has various issues:
- references to 'child' images, which do not exist in mainline zephyr
- invalid RST syntax: there are missing ` characters to end arguments
to :zephyr_file: roles, creating unintelligible output
- incorrect RST usage:
- using :zephyr_file: instead of :file: when referring to a file
that the user must create, creating broken links to nonexistent
files in the zephyr tree
- using :code: instead of :kconfig: to refer to kconfig options,
creating output without links to the help for those options
- redundant or duplicated information
- grammar, typos, various bits and pieces
Clean this up. As part of that, move various common bits and pieces of
information to the devicetree bindings index so they can just be
linked to from the sample docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Sort by unit address. This involves multiple files since there are
includes and secure/non-secure files to deal with.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There are no reference for either K_NUM_PRIORITIES or
K_NUM_PRIO_BITMAPS, with the former being dropped in:
1acd8c2996 kernel: Scheduler rewrite
Dropping both of these, and also the two comments about extra priorities
taking extra RAM space, as those do not seem to apply either.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Document devicetree compatibles which have changed recently and that
have drivers, along with how to handle them.
Recent changes to things like / and CPU nodes aren't worth mentioning
since there are no drivers for such things. I'm similarly not going to
document the vexriscv change since it seems likely that users are
getting this compatible via the DTSI file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Commit c4079e4be2
("scripts: rework edtlib warnings-turned-errors") was trying to abort
on unknown vendor prefix, but the error log is not fatal.
Fix it by using the same error handling function we use when aborting
due to deprecated property usage.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There are way too many one-off vendor prefixes set up for individual
boards to bother tracking them in vendor-prefixes.txt. As a practical
matter, the compatible for the root node doesn't matter anyway. So
just relax our check for that node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a 'mxicy' entry in vendor-prefixes.txt for this vendor. Use it
to be consistent. Linux's
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml file allows
both, but I'd like to see what happens if we try to be consistent in
Zephyr. There isn't a binding for this compatible in zephyr, so I'm
hopeful this won't break any upstream use cases.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These are using unknown vendor prefixes.
I did find references to a Nanjing Tianyi Hexin Electronics Co., Ltd.
on Crunchbase and I thought about adding a vendor prefix, but I can't
justify it since it's just a single board that is using it, and there
is no upstream driver.
Similarly, I found hynitron.com, which seems to be an electronics
vendor, but Google Translate says their "about" page translates to
"Incomplete website information, please contact sales" (and the
English version contains no text).
Just change ',' to '-' instead so there is no vendor prefix anymore.
We can revisit this if anyone wants to upstream drivers for these
compatibles in the future, but for now it doesn't seem worth it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This has an unrecognized vendor prefix which does not seem to serve
any purpose. Removing it is a way forward to turning warnings into
errors on unrecognized vendor prefixes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The Linux vendor prefixes list uses 'cdns'. Match it, especially since
we have that prefix in our own list as well.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These IP blocks' vendor is Cadence, whose proper vendor prefix is
'cdns' if we are going to match the Linux vendor prefixes list.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
As far as I can tell, 'vexriscv' does not name a vendor:
https://github.com/SpinalHDL/VexRiscv
It also doesn't seem entrenched enough to merit a special case
exception to the de factor rule 'the "vnd,foo" namespace is for
vendors'. This is open to debate and we can revise as needed in the
future, but for now let's just rename the compatible to avoid
triggering warnings/errors about unknown vendors.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The original NIOS-II developer and former vendor is Altera, which is
now part of Intel. Let's not add a new vendor prefix for something
that already exists and has been acquired; move it to use the existing
'altr,' prefix instead.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
I can't find any reference anywhere showing that the manufacturer of
the LPD8803 or LPD8806 LED scripts is a company called 'colorway'.
Use 'greeled' instead; these seem to actually be manufactured by
GreeLed corporation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be "maxim,max30101", because the vendor prefix for this
company is "maxim", not "max".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be "u-blox,sara-r4", because the vendor prefix for this
company is "u-blox", not "ublox".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a ftdi,ft800 binding, and it's easy to imagine additional
bindings coming in the future since their USB/UART chips are very
commonly used.
I didn't find anything in Linux for this vendor.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is used for microbit,edge-connector. I couldn't find anything in
Linux, which is not surprising given these boards have constrained
Cortex-M chips.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have various compatibles matching this in a DTSI file.
Linux tracks this vendor too:
4071883fd8
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a binding for apa,apa102 in zephyr.
I can't find any bindings for this vendor in Linux.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a binding for compatible "quectel,bg9x".
I can't find any bindings for this vendor in Linux.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This PR will change accessing the related pinctrl macro from soc_dt.h
And the pinctrl of SCL and SDA were got from pinctrl-0 and pinctrl-1,
respectively. Change it to get from pinctrl-0 only.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit enables the ARM DSP extension on the MPS2 AN521 SoC CPU1
(the CPU1 supports both FPU and DSP).
With this change, the CMSIS-DSP tests running on the
`mps2_an521_remote` board will use the DSP instructions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The CMSIS-DSP matrix binary_q15 tests should not be excluded on the
mps2_an521 board, which is one of the integration platforms.
This test was likely excluded because of the computation precision-
related failures; but, this failure is no longer observed, so there is
no reason to exclude it anymore.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
mps2_an521 so that the integration tests that require large memory can
run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
native_posix and native_posix_64 so that the integration tests that
require large memory can run on this board.
Note that the flash and RAM sizes of 64MiB specified here is an
arbitrary value choosen to ensure that all currently supported tests
can run, since there is no inherent limit for the POSIX boards.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
sam_e70_xplained so that the integration tests that require large
memory can run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
frdm_k64f so that the integration tests that require large memory can
run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP transform test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filter and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP svm test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP support test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP statistics test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP matrix test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filters and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP filtering test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filters and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP fastmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP distance test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP complexmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP bayes test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP basicmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP basicmath benchmark
that enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit that added this board forgot to add the simulation type and
the ARM FPU tests were being only built.
This commit adds the `simulation: qemu` property to enable running the
ARM FPU tests in QEMU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Ring buffer claims that no synchronization is needed
when there is a single producer and single consumer.
However, recent changes have broken that promise since
indexes rewind mechanism was modifing head and tail
when consuming. Patch fixes that by spliting rewinding
of indexes so that producer rewinds tail only and
consumer rewinds head.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test cases that validates if ring buffer handles
correctly case with single producer single consumer from
different contexts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Keep daily docker image in sync with PR based CI image. Need
this for both fix for uefi-run and cmake.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a little wait before completing the test to ensure both
central and peripheral side of the test completes before the
test exits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan_data_status value from being incorrected OR-ed with
the advertising data status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the implementation deciding the use of LLL
scheduling for scanning PDUs with close auxiliary offsets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to release Auxiliary Context on failure
to receive auxiliary chain being in LLL scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We need to alloc node prior to calling lll_scan_aux_setup, otherwise
the same node will be peeked inside that function and it will overwrite
some data in our node (e.g. "extra" field).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to use LLL scheduling for close auxiliary
offsets when active scanning and initiating connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to resume primary PDU scanning window
after use of LLL scheduling to receive auxiliary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Auxiliary PDUs are scanning by the primary scan's LLL
scheduling, then flush the Auxiliary PDUs when processing
them in the ULL instead of using the disabled callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This can be used to check if pointer is a valid lll_scan_aux pointer,
e.g. if we need to decide what kind of struct is attached to RX node
for further processing.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to reset isr status before returning as otherwise irq will be
triggered over and over again.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to traverse the Extended Active Scanned
advertising PDUs, generate the Scannable Advertising and
Scan Response Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Active Scanning hold back the received PDUs in
a linked list and send it to HCI together so that fields
present across these PDUs can be aggregated for generating
the LE Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Flush the scanned advertising PDUs to HCI while receiving
the scan response PDU when Extended Active scanning.
This reverts earlier implementation to remember the
advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Extended Active Scanning and generation of
Extended Advertising Report with Scan Response event type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reverting Extended scanning with LLL scheduling as this is
causing unresolvable merge conflict with the commits that
is implementing the Extended Active Scanning support.
Subsequent commit add the revert implementation back again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After the modules are adapted for the revised
USB device stack configuration, and it seems that
it was only necessary for MCUboot, we can finally
remove Kconfig option CONFIG_USB.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Similar to commit 9512ae488a
("boards: remove USB option for nRF based boards")
Also remove not necessary UART_INTERRUPT_DRIVEN and
duplicate CONFIG_USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Checks PAN ID for matching self address / broadcast, then the short /
extended address based on the used address mode.
Only when IEEE802154_HW_FILTER is not advertised by driver.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
This adds the driver for Omnivision OV2640 image sensor.
The driver provides support for 10 different resolutions in range from
160x120 to 1600x1200 in both JPEG and RGB565 pixel formats. There are
also mutliple configuration options, e.g. hflip, vflip, saturation and
brightness control.
Signed-off-by: Robert Szczepanski <rszczepanski@antmicro.com>
Thumb/ARM interworking causes problems with Zephyr's multiple link build
process when userspace is enabled. When compiling with userspace, the
first link process uses a dummy PROVIDE in the linker script for
z_object_find and z_object_wordlist_foreach. This dummy symbol is
treated as an ARM function call, but one of the calling functions is in
thumb mode. The compiler generates a veneer for thumb functions to call
z_object_wordlist_foreach. On the final link step, z_object_find and
z_object_wordlist_foreach are real functions and get compiled in thumb
mode, thus no veneer is generated in the text section. This means that
the .text size changes between the second and third link steps changing
the start of the devices section. That causes the kobject code to look
in the wrong spot for kernel objects and a crash ensues.
Workaround this for now by only compiling in ARM mode so that no veneer
is needed. Thus the section sizes stay the same during the different
linking steps.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
This macro is referenced by most of the architecture linker scripts, yet
it is only defined in the Metaware toolchain linker header.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The Cortex-R architecture uses the threads stack to save context.
However, that is a security hole since a userspace thread could
manipulate the stack pointer before performing a system call and cause
the kernel to write to memory that it should not. This test will sanity
check that the Cortex-R svc and isr routines do not write to a userspace
supplied stack.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The default address for FAULTY_ADDRESS is valid on the qemu_cortex_r5
board, so use a value that is not mapped for that board.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The Cortex-R platforms may no use XIP which means userspace code with
have read and execute access to some of the RAM so that it can execute
code. However, userspace will not have access the the protected
read/write parts of RAM so it is safe to use the Cortex-M version of
trigger_fault_access for this test.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
QEMU supports the MPU on Cortex-R platforms so enable it for the
qemu_cortex_r5 platform. This allows running the mem_protect kernel
tests.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Related to github #22290. Getting interrupt during mpu buffer validate
is corrupting index register. Fix applied to ARC is to disable
interrupts during the buffer validate operation.
Signed-off-by: Phil Erwin <phil.erwin@lexmark.com>
When running non-XIP, userspace threads need to be able to read .text in
order to execute code. Cortex-R needs to setup an MPU entry to allow
this, but it must be aligned to a power of 2. The linker scripts for
other archs follow this same pattern of aligning the location counter,
but outside of an input section. The linker ignores this and places the
next input section at the LMA of the end of the previous input section.
Avoid this problem by make RODATA the last ROM section. The MPU_ALIGN
can be moved inside the RODATA input section and correctly pad the
entire ROM section out to a power of 2 boundary.
_image_rom_end_order contains the power of 2 alignment which allow the
soc to set the MPU configuration statically based on the size of the ROM
sections instead of having to do it dynamically.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Cortex-A/R does not have hardware supported nested interrupts, but it is
easily emulatable using the nesting level stored in the kernel
structure.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Add functionality based on Cortex-M that enables recovery from a data
abort using zephyr's exception recovery framework. If there is a
registered z_exc_handle for a function, then use its fixup address if
that function aborts.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
With the addition of userspace support, Cortex-R needs to use SVC calls
to handle oops exceptions. Add that support by defining ARCH_EXCEPT to
do a svc call.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The user thread cannot be trusted so do not use the stack pointer it
passes in. Use the thread's privilege stack when in privileged modes to
make sure a user thread does not trick the svc/isr handlers into writing
to memory it should not.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some display drivers may actually be initialized after LittlevGL
as those drivers and LittlevGL's lvgl_init() all have SYS_INIT()
at APPLICATION and init priority the same as application init
priority. Depending on how the final binary is linked, these
drivers may initialize after lvgl_init() resulting in it not
able to find a display driver. This changes the value of
CONFIG_DISPLAY_INIT_PRIORITY so that the display drivers that
make use of this kconfig are initialized a bit earlier to
ensure that they are actually initialized before lvgl_init().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Note that the include to subsys has been moved from
under the drivers into subsys, as it is actually
the subsystem's job to make sure the include
directories are correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a, simply
build a separate static library for the top level of sensor
drivers. Also, for those that were not building its own
static library, make them do so as majority of sensor
drivers are building their own static libraries.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Note that the include to subsys/bluetooth has been
moved from under drivers/bluetooth to subsys/bluetooth,
as it is actually the subsystem's job to make sure
the include directories are correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make subsys/bluetooth/audio build as a static library.
This is in preparation to enable building the bluetooth
drivers as a static library. That would change the line
"zephyr_include_directories(subsys/bluetooth)" where
this include path is applied to all code compiled.
Its removal will result in subsys/bluetooth/audio not
able to find subsys/bluetooth/common/log.h. So change
subsys/bluetooth/audio to be built as a static library
so it can link to the subsys/bluetooth library where
it can find "log.h" there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting the object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the build command so the I2C EEPROM slave
is being grouped into the I2C static library.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the init priority of native posix console to 99.
When building for native_posix, it is usually assumed that
the output would be stdout. With old priority at 60, UART
console, for example, can be initialized later which means
printk() would not go to stdout. So changing the native posix
console to be (hopefully) initialized last.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The zephyr_library_* variant is missing the ability to
include directories based on kconfig. So add the function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The arm64_smp_init() is the same initialization level
and priority as the GICv3 interrupt controller. This means
that arm64_smp_init() can be called before the interrupt
controller driver has been initialized if linker decides
to put the driver init entry later. This would result in
faults when arm64_smp_init() is trying to connect interrupts.
So move arm64_smp_init() to PRE_KERNEL_2 instead. SMP
initialization is called later in the boot process so
this should not affect SMP operations.
This is in preparation of making interrupt controller
drivers to be build as static library. The linking order
is going to change which will result in this being
initialized before the interrupt contoller driver.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adding board bl654_usb which is a Laird Connectivity BL654 module
mounted on a USB adapter.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
Adds a low_lat name to the duplicated low_lat babblesim tests to allow
them to run in parallel with their counter parts.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
_pm_devices, pm_suspend_devices, pm_low_power_devices and
pm_resume_devices are only used if CONFIG_PM_DEVICE is defined and not
CONFIG_PM.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix a race condition that caused the Controller to deadlock
waiting for a semaphore that be given when LLL events have
been disabled.
ULL reference count is checked in thread context to decide
if LLL events are pending, but the reference count can be
decremented by the ULL execution context which prevents the
set `disabled_cb` function not being called due to no
pending event to produce the done events.
Fixed by re-checking if reference count is zero and avoid
waiting to take the semaphore.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While RADIO_DFECTRL1_TSAMPLESPACING and RADIO_DFECTRL1_TSAMPLESPACINGREF
has similar values, but they are logically different.
As expected by "radio_df_ctrl_set" function, TSAMPLESPACING should be
passed to this function not TSAMPLESPACINGREF.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
When events are placed back into pipeline as resume events,
only remove duplicate resume events and not new prepare
events that may have been enqueue between the start of the
pre-empt ticker and its timeout.
Due to new prepare events that was removed, extra done
events generated cause the number of enqueued done events
to overflow and assert.
Fixes#36381.
Fixes#37597.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the incorrect iterator index being reset when flushing
duplicate resume events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the AD data race condition handling with explicit
revert of `pdu->last` value after detecting the race.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add workaround for no command buffer available when the host is
transmitting Host Number of Completed Packet Commands.
This command does not follow normal flow control of HCI commands and
the controller side HCI drivers that allocates HCI command buffers with
K_NO_WAIT can end up running out of command buffers.
Increase the command buffer count from 2 to 10 for the affected drivers
until the issue has a proper fix.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Its possible that a dts binding doesn't inherit from base.yaml and
thus doesn't have `wakeup-source` defined. To handle these cases
use DT_PROP_OR() which can deal with a property not existing at
all.
Fixes#37676
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
add configuration for testing the spi through the dma1
on the nucleo_l152re target. This test requires the MOSI pin
to be connected to the MISO pin on the board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The STM32_DMA_SLOT macro from include/drivers/dma/dma_stm32.h
must be used here, especially for dma of type v2bis.
In this case, the dma-cell is not defined and slot is null.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add configuration for testing the usart3 through the dma1
on the nucleo_l152re target.This test requires the Tx pin
to be connected to the RX pin on the board.
Pin definition is added for this usart instance.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With CMake minimum required as 3.20.0 we update CI to use docker image
v0.18.2, which contains CMake 3.20.5.
For doc builds we fetch the same CMake v3.20.5 but using pip as the doc
build doesn't use the docker image.
The main reason for increasing CMake version is better toolchain
support.
The decision to bump the CMake version was taken by the Toolchain WG.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update west.yml to get fix to include building fsl_common_arm.c as
its needed by part of the HAL. (Watchdog driver fails to build
without this).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reduce the Rx window swithch overhead for continuous scan by
using radio interfae `radio_tmr_start_now` that accounts for
any minimum ticker offset requirement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the radio software switch from Rx to Tx when in
passive scanning, as there is no transmission requirement
after reception of a PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The log level was always set to debug. Defining BT_DBG_ENABLED same
as for other bluetooth files allows to switch off debug log messages.
Signed-off-by: Martin Jäger <martin@libre.solar>
The current code uses dev->data for finding back the instance data
structure in various places, but for the dio1 irq callback, dev refers
to the GPIO device node (not the LORA radio one), so dev->data returns a
pointer to the GPIO data rather than a "struct sx126x_data".
Fix that by using CONTAINER_OF to find back the correct structure from
the callback pointer.
The bug was introduced in:
74efaa920a drivers: sx126x: refactor few functions for stm32wl support
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
LOG_INF: It's meant to write generic user oriented messages.
LOG_DBG: It's meant to write developer oriented information.
use LOG_DBG instead of LOG_INF to hide debug message.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The qspi-nor flash is enabled.
Can be tested with e.g. drivers/spi_flash sample
Missing documentation of support of SPI and I2C added
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Add sifive-e24 cpu binding. This introduce riscv,cpu binding to
be used as riscv cpu base and riscv,sifive, which define specific
properties for this vendor. Both are necessary to create the e24
core.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit updates the MPS3 AN547 SoC configuration to enable the FPU
as well as the DSP and MVE extensions.
Note that the CPU0 of the SSE-300 (and AN547) supports all of the
extensions mentioned above (as for MVE, it supports both MVE-I and
MVE-F).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the ARMv8.1-M M-Profile Vector Extension (MVE)
configurations as well as the compiler flags to enable it.
The M-Profile Vector Extension consists of the MVE-I and MVE-F
instruction sets which are integer and floating-point vector
instruction sets, respectively.
The MVE-I instruction set is a superset of the ARM DSP instruction
set (ARMv7E-M) and therefore depends on ARMV8_M_DSP, and the MVE-F
instruction set is a superset of the ARM MVE-I instruction set and
therefore depends on ARMV8_1_M_MVEI.
The SoCs that implement the MVE instruction set should select the
following configurations:
select ARMV8_M_DSP
select ARMV8_1_M_MVEI
select ARMV8_1_M_MVEF (if floating-point MVE is supported)
The GCC compiler flags for the MVE instruction set are specified
through the `-mcpu` flag.
In case of the Cortex-M55 (the only supported processor type for
ARMv8.1-M at the time of writing), the `-mcpu=cortex-m55` flag, by
default, enables all the supported extensions which are DSP, MVE-I and
MVE-F.
The extensions that are not supported can be specified by appending
`+no(ext)` to the `-mcpu=cortex-m55` flag:
-mcpu=cortex-m55 Cortex-M55 with DSP + MVE-I + MVE-F
-mcpu=cortex-m55+nomve.fp Cortex-M55 with DSP + MVE-I
-mcpu=cortex-m55+nomve Cortex-M55 with DSP
-mcpu=cortex-m55+nodsp Cortex-M55 without any extensions
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit disables the Cortex-M null pointer detection feature for
the QEMU mps3_an547 targets because QEMU permits bus access to the
unmapped 0x0-0x400 region used by the MPU-based null pointer detection
feature.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Now that SDK 0.13.0 is out we can enable QEMU support on the
MPS3-AN547 to get coverage on Cortex-M55.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The current riscv linker script don't have sections for
Data & Instruction Tightly Coupled Memory. Add itcm and
dtcm sections to make it available. All sections were
8 byte align to keep compatible with rv64 SoCs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Updating to the SDK 2.10.0 for select platforms.
west.yml:
- Update to point to the NXP HAL update with SDK 2.10.0 files
- modules/tee/tfm needed to be updated to synchronize the
LPCXPRESSO55S69 platform SDK to version 2.10.0 to be in sync
with Zephyr usage of SDK 2.10.0
drivers/counter/counter_mcux_pit.c:
- underlying SDK 2.10.0 adjusted the setting by -1 so need
to adjust the reported value set by +1
drivers/ethernet/eth_mcux.c:
- SDK2.10 ethernet driver provided an assert test that highlighted
we were using the wrong clock source on various platforms.
drivers/memc/memc_mcux_flexspi.c:
- SDK2.10 added compile time conditional on whether a field was
defined for the flexspi configuration structure.
Signed-off-by: David Leach <david.leach@nxp.com>
The MWDT compiler can replace some code with call to builtin
functions. We can't rely on these functions presence if we
don't use MWDT libc.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
We don't need MWDT libc if we are using minimal one provided by
Zephyr. So let's avoid linking mwdt libc if CONFIG_MINIMAL_LIBC
is enabled.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Implement _istty hook as it is required for proper setup of
STDIN/STDOUT/STDERR buffering.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
MetaWare hostlink is a library of system calls for debugging.
We don't use in case of Zephyr, however we provide real system
calls implementations. Let's pass -Hhostlib= to MWDT linker to
eliminate the MetaWare hostlink library from linkage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Don't define clockid_t in Zephyr in case of ARC MWDT libc
is used as ARC MWDT libc provides clockid_t.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
MWDT provides paddr_t type and it conflicts witn Zephyr definition:
- Zephyr defines paddr_t as a uintptr_t
- MWDT defines paddr_t as a unsigned long
This causes extra warnings. However we can safely define
paddr_t as a unsigned long for the case when MWDT toolchain is used as
they are both unsighned, have same size and aligning.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARC MWDT don't provide ssize_t type which is used in Zephyr.
Define ssize_t for ARC MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARC MWDT toolchain misses stdout hooks implementation and
itimerspec structure in timespec header. Let's add them in
arcmwdt compatibility layer.
The implementation was inspired by libc-hooks.c for NEWLIB.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add missing dts binding for sensor, this was causing build errors with
CONFIG_PM set on bt510/bt6x0 boards.
Fixes#37675
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds a devmem load command for shell that allows
users to easily load arbitrary data into the device memory.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
nucleo_l476rg:
adds tim3 with pwm on pb4, changes tim2 pwm pin from pa0 to pb10.
As a result timers are available on arduino pins D5 and D6.
nucleo_wb55rg:
adds tim1 with pwm on pa8, changes tim2 pwm pin from pa0 to pa15.
As a result timers are available on arduino pins D5 and D6.
Use default prescaler (==1) for 32-bit timer and
10.001 for 16-bit timers, as these are commonly used.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
nucleo_g0b1re:
removes spi2 from arduino header pins to ST morpho pins in order to
free pins for other peripherals.
Adds tim15 with pwm on pb14, changes tim3 pwm to pb4.
As a result timers are available on arduino pins D5 and D6.
nucleo g474re:
Adds timer 3 with pwm pin on pb4 and changes tim2 pwm pin
from pa5 to pb10.
As a result timers are available on arduino pins D5 and D6.
Use default prescaler (==1) for 32-bit timer and
10.001 for 16-bit timers as these are commonly used.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The new JIT scheduler does not have slot reservation, which means that
the ticker extension feature for automatically re-scheduling a colliding
non-anchored event, e.g. ADV, cannot be used.
This implementaion reacts to ADV envent done with result ABORTED or
TOO_LATE, and in those cases attempts to re-schedule the ADV event again
within the 10 ms pertubation window.
As the original scheduling, the re-scheduling is randomized, so there
is no absolute predictability as to how many attempts will be made. The
advertiser will attempt with randomly delayed re-schdules until the
window is exhausted.
If re-scheduling is unsuccessful, the weight of the ADV event is
increased, improving it's chances of success in the next event.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix failure due to advertising report count being
incremented faster than the wait loop that had longer delay
compared to the received interval of the advertising report.
Fixes#37652.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
DT_PROP for a phandle property should return the node that phandle
points to (similar for DT_PROP_BY_IDX for phandles) and this wasn't
working as the define generator didn't create the proper defines for
phandle(s).
Fix the generator and add some tests to make sure this continues to
work correctly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch the actual API implementation to the external API and mark the
internal ones as __DEPRECATED_MACRO.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
we use flag 0 in osSignalWait function to wait for
any single signal flag, but with this 0 flag,
it won't clear thread signal results as expected,
we need to check whether signal flag is 0 firstly.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Max SPI chunk len was missing from the
implementation, causing SPI to hang up in some
conditions.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
bt_conn_cb section was added into common-rom.ld and
as current ESP has limited segment section number, it
needs to be moved out from there.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Change cdc_acm_poll_out to do the best to mimic behavior
of a hardware UART controller without flow control.
With this patch, if the USB subsystem is not ready,
no data is transfered to the buffer, that is, new character
is dropped. If the USB subsystem is ready and the buffer is full,
the first character from the tx_ringbuf is removed to
make room for the new character.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
add flow_ctrl filed and give it initialized value
based on hw_flow_control.
Initialize mcux lpuart based on flow_ctrl
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Currently, with EATT enabled, when bt_gatt_read is called with multiple
handles first it'll try to use gatt_read_mult_vl, and if it fails
gatt_read_mult will be used to try again. Add option to skip
the gatt_read_mult_vl and use gatt_read_mult right away. This is needed
by tests that expect BT_ATT_OP_READ_MULT_REQ but support variable
lenght, thus don't return BT_ATT_ERR_NOT_SUPPORTED.
Removed fallback from read multiple vl to read multiple on
BT_ATT_ERR_NOT_SUPPORTED error.
This was affecting:
GATT/CL/GAR/BV-05-C, GATT/CL/GAR/BI-18-C, GATT/CL/GAR/BI-19-C,
GATT/CL/GAR/BI-20-C, GATT/CL/GAR/BI-21-C, GATT/CL/GAR/BI-22-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Add the number of strdup buffers currently in use to the
`log strdup_utilization` shell command.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
This is the debugging tool of last resort for figuring out where a
devicetree macro went wrong, but it's very effective. Document how to
do it on GCC based toolchains.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit adds a high-level overview of Trusted Firmware-M,
describing the basic architecture and integration work with Zephyr.
Co-authored-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This introduces a new kconfig CONFIG_DISPLAY_INIT_PRIORITY
to specify the initialization priority for display devices.
Most of the display devices are using APPLICATION and
CONFIG_APPLICATION_INIT_PRIORITY which is not entirely
appropriate for devices. Due to linking order, the display
device may be initialized after application code at same
init level and priority. This results in the display device
not ready to be used for application code. So this kconfig
option allows the display devices to be initialized earlier
if needed.
For the drivers using CONFIG_APPLICATION_INIT_PRIORITY,
they have been changed to use CONFIG_DISPLAY_INIT_PRIORITY
instead.
Note that the default value for CONFIG_DISPLAY_INIT_PRIORITY
is the same as CONFIG_APPLICATION_INIT_PRIORITY at 90 to
avoid any functional changes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa XCC does not like C99 style declarations in for
loops.
Fixes: 268f9bf163 ("nuvoton: battery-backed ram")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Renames stm32g0 tim1 brk interrupt to brk_up_trg_com, such that the
naming aligns with stm32f0 series and drivers can find the interrupt
with a common name.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Fix the node rx memory pool corruption regression introduced
due to same peer connection being rejected.
Regression introduced in commit 30f260dfaa ("Bluetooth:
controller: Fix adv/scan context access post release").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a new radio event is scheduled with a relatively short
preempt timeout while there is already a started preempt
ticker, then stop the ticker, abort the previous event that
requested the preemption, and request to start ticker with
the new relatively short preempt timeout.
Fixes#30245.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When there are multiple events in prepare pipeline then fix
the implementation so that only one preempt ticker start
or stop operation is enqueued towards ticker_job for
processing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PSoC-6 have different priority bit masks for cortex-m0+ and cortex-m4.
M0: 0-3 (2 bits of NVIC prio, no prio reserved by the kernel)
M4: 0-6 (3 bits of NVIC prio, one level reserved by the kernel)
The current macro that gets priority level value from devicetree apply
same value from cortex-m4 on cortex-m0+. This add missing indirection
to get from intmux node the correct cortex-m0+ priority level value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a macro for encoding interrupt source information: GIRQ number,
GIRQ bit position, GIRQ aggregated NVIC connection, and source
direct NVIC connection.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add ADC driver version 2 for MEC172x using new in-tree headers
and device tree properties. Update the ADC shell for the new driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Introduce a new API to allow devices capable of wake up the system
register themselves was wake up sources. This permits applications to
select the most appropriate way to wake up the system when it is
suspended.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Just using a simple atomic for flags instead of using an array.
While is neat using ATOMIC_DEFINE for future proof. The reality is
that it brings some problem for the wakeup source implementation
that needs to statically initialize it during the device definition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update zephyr side to handle hal_nxp using cmake-ext/kconfig-ext. This
allows for having zephyr specific integration code live with the zephyr
source tree.
For now on the cmake side we just use add_subdirectory() of the hal_nxp
repo so the integration is effectively transparent.
For Kconfig we add a place holder Kconfig file since the hal_nxp repo
doesn't have any Kconfig files in it currently.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add config macro to set interrupt as level triggered for ARM CPUs
Merge all timer configures into one place, then no need to overwrite
hpet_timer_conf_get/set() functions in SoC layer
Make hpet_timer_comparator_set() as the only register access function
to implemented in the SoC layer
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
When transmitting a frame, inform the radio driver whether
security processing and/or header updates are needed or not.
When a frame was transmitted, inform back to OpenThread whether
the security procedure and/or header updates were completed for
the frame or not.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
According to Atmel SAM datasheet when writing data to the latch buffer
"32-bit words must be written continuously, in either ascending or
descending order. Writing the latch buffer in a random order is not
permitted." To enforce the requirement we need to call a memory barrier
instruction after copying every word of data to the latch buffer. In
the absensce of __DSB() call the ARM processor is free to change order
of AHB transfers. This has caused the driver to occasionally corrupt
data programmed in the flash.
Fixes#37515
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
As 0.13 SDK is available and used in upstream verification by
default we can allow Zephyr toolchain for ARCv3 64bit boards.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The file <board>.dts_compiled was made obsolete in 8d8b06978c.
<board>.dts_compiled contains only a reference to zephyr.dts.
Users interested in devicetree should be familiar with zephyr.dts,
therefore it's time to remove the unused <board>.dts_compiled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Description was falsely static that macros statically creates
the ring buffer objects. Clarify description since variables
are not static.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The psoc6 SoC has 2 cores, each with different allowed priority ranges:
CM0: 0-3 (2 bits of NVIC prio, no prio reserved by the kernel)
CM4: 0-6 (3 bits of NVIC prio, one level reserved by the kernel)
Since some of the peripherals are only available to the CM4, those
should be set to a priority that is actually valid for it. In this case
the lowest possible one is 6, so transition from 7 to 6.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is a follow-up to commit 954dfa755b.
Apply adjustments made in the i2s_api test to the i2s_speed one so that
it can also be executed successfully on the nRF DK boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If HCI LE Set Extended Advertising Enable command is sent
again for an advertising set while that set is enabled, then
any change to the random address shall take effect.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Test advertising re-enable to cover reset of event counter,
duration and the number of events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Permit enabling already enabled advertising. Enabling
advertising when it is already enabled can cause the
random address to change, as specified in the Bluetooth
Specifications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
By default ICMP desination unreachable error packets are generated when
input packets target ports that are not in a listening state. This not
only reveals the presence of the host on the network which may be
considered a security vulnerability depending on the application, it
also ends up triggering ARP lookups to respond to the sending host. With
a small ARP table and a network where there may be broadcast (or
multicast) service discovery traffic such as mDNS or uPnP, ARP table
thrashing can occur impacting network stack performance.
Signed-off-by: Berend Ozceri <berend@recogni.com>
add a config CONFIG_QEMU_UEFI_BOOT to indicate whether
the qemu will use UEFI bootable method;
add a new test "sample.basic.helloworld.uefi" to verify
UEFT bootable method on qemu_x86_64 platform.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
When enabling MSI & MSI-X, the code seemed to handle fallback to MSI
when MSI-X is not available, but the logic uses MSI-X even if not
available and the MSI path never gets used.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
When building on non-X86 platforms K_MEM_PERM_RW gets undefined.
Fixes: a2491b321e ("drivers/pcie: Add support for MSI-X")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Introduce a bugfix for CONFIG_OPENTHREAD_CUSTOM_PARAMETERS handling in
OpenThread build system integration for Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The latest MESH.TS 1.0.1.2 4.15.10 Appkey List Procedures
MESH/NODE/CFG/AKL/BI-04-C
Verify that the IUT can respond to an Config AppKey Add
message with NetKeyIndex and AppKeyIndex already stored.
6. Repeat step 1 with the same AppKey, the same
AppKeyIndex, but NetKeyIndex field set to 0x001.
7. The Lower Tester expects the IUT to respond
with an Config AppKey Status message with the
Status field set to 0x04 (Invalid NetKey) and
the NetKeyIndex and AppKeyIndex values equal to
those sent in step 5.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The function to execute shell commands: shell_execute_cmd will now
behave similarly to invoking command line commands.
I.e. after the command is executed the command buffer is cleared,
while the cursor is set to the initial position.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
I saw a user wondering what this is for and and where it comes from.
Provide a comment header with some explanation and a pointer to where
to find out more.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix the missing resumption of connectable advertising and
release of received connection complete buffers from LLL
after detecting connection from same peer.
Relates to commit 010c5c2f20 ("Bluetooth: controller:
Ignore connections from same peer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Metaware assembler doesn't accept '@' symbol in the beginning
of symbol name like GNU does.
Drop excessive '@' for _curr_cpu symbol.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The constructors of static objects are stored in ".ctors"
section. In case of MWDT toolchain we have incompatible
".ctors" section format with GNU toolchain. So let's use
initialization code provided by MWDT instead of Zephyr one
in case of MWDT toolchain usage.
As it is done for GNU toolchain We call constructors of
static objects but we don't call destructors for them.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Convert ws2812 LED strip driver to `spi_dt_spec`. Also moves the init
function implementation outside the declaration macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert the at2x eeprom driver to `spi_dt_spec` and `i2c_dt_spec`.
I2C functions are not fully converted due to the non-standard addressing
scheme.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add sensor API hysteresis attribute. This attribute allows for
configuring trigger threshold hysteresis values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Microchip XEC has been using the standard NS16550 driver.
Using the standard NS16550 driver requires extra HW programming
for XEC UART in board level and did not support XEC GIRQ interrupt
programming. We add an XEC specific driver and remove UART specific
register programming from the board level and implement interrupt
support. Also, by implementing a SoC specific driver we can add
driver PM in the future.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This change adds support to the cc1352r_sensortag for the hdc2xxx
temperature and humidity sensor introduced independently in #36342.
Fixes#36410
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
To get confirmation this will work before I cut the release. That
pre-release is already available on PyPI.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a stopgap release meant to backport bug fixes and new features
while v0.12.0 is blocked.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The setup() method is trying to find the zephyr repository by name,
but it's not passing allow_paths=False to the west method it uses to
search.
That may lead to unpredictable results depending on what the current
working directory is in the calling environment.
For robustness, disallow paths and make sure we are only searching for
the zephyr project by name.
Add some more comments to explain what is going on and clean up the
empty string handling while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
To keep bisectability, cmake and west modifications
needs to be in sync.
cmake: update external project configuration
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Microchip XEC two custom DT properies girqs and pcrs cell sizes
are defined as constants. There is no need to replicate these
is the chip DTSI since the value cannot be changes. Fix the syntax
of the cell size constant to match the naming convention used
thoughout DT.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Figuring out what the lowest possible priority in platforms where
CONFIG_ZERO_LATENCY_IRQS is supported is not possible before the Kconfig
tree is built and resolved. In order to make the user's life easier,
abort the build if IRQ_CONNECT() is called with an invalid (i.e. too
low) priority.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Pull a new revision of the hal_ti module that uses dynamic interrupts
instead of build-time ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a check for the mandatory channel receive callback when the
application provides the L2CAP channel operations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
based on uart rom functions, also enable console driver
on top of this driver, which enables logging
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
This commit reworks nRF IEEE 802.15.4 temperature update module to save
resources, otherwise used to create thread, by using work queue.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
Add optional support for the DRDY/INT pin. This avoids waiting a fixed
time for the temperature and humidity conversion to finish.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Soft-reset the TI HDC20XX sensor during init to bring all registers in a
known and consistent state.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The temperature and humidity samples are 16 bits long and can therefore
fit in a uint16_t variable. This save 4 bytes of RAM.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds defines for ECC public keys, private keys, DH keys and key
coordinates. Replaces raw numbers throughout.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The ipm_stm32_hsem driver is a virtual mailbox based on STM32 HSEM.
Since we already have LL_HSEM(low-level HSEM) API on the hal_stm32
module, looks there is no need to implement a new HSEM driver.
But there are still have some limitations, the HSEMx interrupt is
not shareable. If another HSEM user wants to use the HSEMx interrupt,
the ipm_stm32_hsem mailbox needs to be disabled.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
Some STM32 SOC, like stm32h745 and stm32h747 doesn't have IPCC.
Provide a STM32 HSEM based ipm driver for these SOC.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
In order to use the newlib retagetable locking interface (for thread
safety), which requires the newlib multi-threading feature to be
enabled, the Zephyr SDK 0.13.0 or above must be used.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the tests for the newlib retargetable locking
interface, as well as the tests for the internal lock functions that
are supposed to internally invoke the retargetable locking interface.
All of these tests must pass when the toolchain newlib is compiled with
the `retargetable-locking` and `multithread` options, which are
required to ensure that the newlib is thread-safe, enabled. If the
toolchain newlib is compiled with either of these options disabled,
this test will fail.
This commit also adds the userspace testcases to ensure that the newlib
is thread-safe in the user mode.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `static` keyword to the test functions that are
not intended to be globally available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the newlib retargetable locking interface function
implementations in order to make newlib functions thread safe.
The newlib retargetable locking interface is internally called by the
standard C library functions provided by newlib to synchronise access
to the internal shared resources.
By default, the retargetable locking interface functions defined within
the newlib library are no-op. When multi-threading is enabled (i.e.
`CONFIG_MULTITHREADING=y`), the Zephyr-side retargetable locking
interface implementations override the default newlib implementation
and provide locking mechanism.
The retargetable locking interface may be called with either a static
(`__lock__...`) or a dynamic lock.
The static locks are statically allocated and initialised immediately
after kernel initialisation by `newlib_locks_prepare`.
The dynamic locks are allocated and de-allocated through the
`__retargetable_lock_init[_recursive]` and
`__retarget_lock_close_[recurisve]` functions as necessary by the
newlib functions. These locks are allocated in the newlib heap using
the `malloc` function when userspace is not enabled -- this is safe
because the internal multi-threaded malloc lock implementations
(`__malloc_lock` and `__malloc_unlock`) call the retargetable locking
interface with a static lock (`__lock__malloc_recursive_mutex`). When
userspace is enabled, the dynamic locks are allocated and freed through
`k_object_alloc` and `k_object_release`.
Note that the lock implementations used here are `k_mutex` and `k_sem`
instead of `sys_mutex` and `sys_sem` because the Zephyr kernel does not
currently support dynamic allocation of the latter. These locks should
be updated to use `sys_mutex` and `sys_sem` when the Zephyr becomes
capable of dynamically allocating them in the future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add tests to ensure that conversions remain linear for large time deltas
when no skew is present.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix conversion drifts for large deltas by only applying float
operations when the skew requires it. This helps because not all
integers are representable as floats, so large integers are
neccessarily quantised when performing float operations.
When required, floating-point operations are now performed on doubles
instead of floats.
Fixes#37263.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Make the `lora_recv` operation thread safe by copying memory directly
in the callback instead of deferring copying to the original caller.
To ensure pointer validity, this requires performing operations "inside"
the `modem_release` context.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Ensure that the modem is not asked to perform new operations before the
previous operation completes.
An atomic variable is used instead of a mutex as multiple threads need
to release the lock. A semaphore isn't used as there is no indication
whether `k_sem_give` gives the semaphore or not, which is required to
determine if `Radio.Sleep()` should be run.
`Radio.Sleep()` is only ever run by the context that successfully
releases the modem usage, to guard against double calls.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Transition the receive synchronisation method from a single driver
semaphore to a function specific k_poll_signal. This is required to
allow the modem to be released without introducing race conditions on
the signalling mechanism.
Without this change, the RX can either be signalled before the modem is
released, unblocking the calling thread before the modem is put back to
sleep, or after the modem is released, in which case a second thread
could start using the semaphore before the original thread is signalled.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If no packet was received in the provided timeout, manually transition
to sleep mode. If a packet was received, the rx_done callback
automatically transitions the modem to sleep.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The timeout parameter for `lora_recv` is no longer a millisecond value
but a standard `k_timeout_t` value.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove compilation warning about adv_sync_pdu_ad_data_set function
that is defined but not used.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Bluetooth host may request to send more than one CTE in
connectionless mode. That is relized by periodic advertising
chained PDUs.
To check correctness of implementation of such functionality
new unit tests were added.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding functionality allows to send a number of periodic
advertising PDUs in a chain that have CTE.
Disable sending CTE requiers additional steps while removing
cte_info from periodic advertising chains.
Removal of cte_info fields may be just delete of that filed
from extended advertising header. In case the PDUs are empty
PDUs created just to transport CTE. Those PDUs should be removed
from a periodic advertising chain.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add release of chained PDUs by lll_adv_pdu_and_extra_data_-
latest_get function. It is requier to release unused
PDUs from a chain to avoid PDUs leakage.
It maight happen when chained PDUs were used by Direction
Finding, then lll_adv_pdu_and_extra_data_lates_get is used
instead of lll_adv_pdu_lates_get.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To check if advertising PDU is empty we can compare its length to 1.
To avoid use of magic number, the commit provides a macro for that
purpose.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding functionality allows to send a number of periodic
advertising PDUs in a chain that have CTE.
ll_df_set_cl_cte_tx_enable function was changed to update periodic
advertising chain to include cte_info field. If the chain is too short,
there is less PDUs in the chain than requested number of CTEs,
the function will add new empty PDUs to the chain end.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enabling or disabling transmission of Constant Tone Extension with
periodic advertising PDUs requires update of a PDU content.
CTE_INFO field of periodic advertising PDU must be filled with
appropriate data. That operation may be done for periodic
advertising PDU (or chain of PDUs) filled with other payload that
wasn't enqueued towards LLL. In that situation PDUs are updated
in place, to avoid increase of memory consumption.
The commit changes ull_adv_sync_pdu_set_clear function to
make possible update of the advertising PDU in place.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Some functions, provided to handle changing content of periodic
advertising PDUs, were defined as static.
Code responsible for handling direction finding updates periodic
advertising PDUs also. For that purposes, those functions were mede
globally accessible.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add configuration of CTE for periodic advertising chain transmission.
The commit provides configuration of radio in prepare stage and
in handle of Tx ISR. CTE is configured only for PDUs that
have cte_info field in extended advertising header.
During prepare of periodic advertising event there are updated
aux_ptr fields in extended advertising header in other PDUs from
a periodic advertising chain. aux_ptr offset value also depends
on CTE length. CTE configuration is always the same for every
PDU in periodic advertising chain.
CTE may be added to requested number of PDUs in periodic
advertising chain. Although it is possible that there are PDUs
that don't have CTE. PDUs that have CTE are alsways at the beginning
of a periodic advertising chain.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Configuration of CTE for transmission is stored in extra_date member
of a lll_adv_sync object. PDUs in periodic advertising chain share the
same CTE configuration, so there is single instance of the extra_data.
To configure CTE transmission for every PDU in periodic advertising
chain a new function was introduced to peek extra_data instance without
peeking new PDU.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Transmission of Constant Tone Extension is done after END event
triggered by radio. To correctly switch from TX to TX (back 2 back
TX) after transmission of CTE PHYEND event must be used instead of
END event.
The commit provides required function that allows LLL to correctly
setup radio to do back to back switch of TX when CTE transmission
is enabled.
The radio_switch_complete_and_phy_end_b2b_tx cannot be implemented
in radio.c source file. It will fail build of unit tests targeted
for NRFBSIM simulator board. There is no RADIO_SHORTS_PHYEND_DISABLE_Msk
macro defined in bsim_hw_models module.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Amount of memory allocated for advertising PDUs (including
periodic advertising) depends on two factors:
- maximum advertising data length
- maximum number of CTE in a periodic advertising chain.
Maximum advertising data length is divided by maximum size
of a single fragment (number of payload bytes that single
advertising PDU may hold) to get required number of fragments.
Actual number of PDUs allocated for advertising is maximum
of acutal number of advertising payload fragments and maximum
number of CTEs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add possiblity to configure maximum number of PDUs with Constant Tone
Extension in a single periodic advertising chain.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
We try to reduce the ambiguity between 'soc/nuvoton/' and
'soc/nuvoton_npcx' folders. Most if soc vendors name their soc folder by
the company name with SOC_FAMILY suffix instead of the company name
directly. It is clearer if the soc company has different product lines
that aim to specific markets.
In this CL, the 'numicro' suffix is used for Nuvoton Microcontroller
production line. It distinguishes the 'npcx' suffix that used for
Nuvoton Embedded Controller (EC) of Notebook PC product line.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL renames 'Nuvoton Platform' as 'Nuvoton_NPCX Platform' and
modifies the relevant files used by this platform. It also changes
status from 'orphaned' to 'maintained' since we do maintain npcx drivers
continuously.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This allows board to re-configure ROM_BASE address while building
firmware image.
For example, a board need to build two firmware images. And the images
are put into one flash and required to work independent:
config FLASH_LOAD_OFFSET
default 0 if FIRST_IMAGE
default 0x80000 if SECOND_IMAGE
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
ARCv3 has ARConnect implementation similar to ARCv2, so
use existing ARConnect header for ARCv3 as well.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Current location options for linker source files includes init and
noinit ram data, but only a noinit ram section. This makes it impossible
for application code to define an initialized RAM output section,
such as with the Z_ITERABLE_SECTION_RAM() helpers.
Adding a DATA_SECTIONS linker source option for this use case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fixes issue 34879
This PR updates previous PR's 37138 and 37139.
Refer to issue 34879 for information from MCHP HW
designers. A delay after enabling interrupts is a
more appropriate work-around than depending upon
behavior of ARM DMB instruction.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The main motivation is to avoid polluting the all-caps "DT_"
namespace, which within zephyr belongs to devicetree.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Socket CAN does not require interface link address to be
assigned, check is not applicable for socket CAN
interfaces. As this address is NULL for socket CAN interface
it results in assertion.
Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com>
Use the internal function z_device_get_all_static helper function
instead of using __device_start and __device_end directly. Some other
minor adjustments have been done (e.g. reduce *dev scope to the for
loop). An issue on the range of the for loop in _pm_devices has also
been fixed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The shared _pm_devices function used should_suspend check function to
see if a device had to be suspended or not. Some of the logic inside
that function was redundant since the pm_device_state_set function
already performs similar checks, e.g. if the device is already at the
given state or the state transition is not supported it will return
error codes appropriately.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A device that is turned off should not be suspended. A device that has
been turned off can only be resumed. This action is currently forbidden
by the "should_suspend" function in the device PM code.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
esp32c3 SoC is an rv32imc, so it does not support the atomic builtin.
Since it relies in atomic instructions.
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Some boards, e.g. atsamd20_xpro, enable non-minimal peripherals by
default like SPI. This goes against board porting guidelines, as it
enables a peripheral that is not necessarily used by all samples,
as discussed at #30694. This removes SPI as a default peripheral
for all sam/sam0 boards.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
RT platforms that support TRNG IP (rt10xx and rt6xx) need to set
RNG and CSRNG to Xoroshiro and CTR_DRBG respectively instead of
using TRNG as random source.
Fixes: #37307
Signed-off-by: David Leach <david.leach@nxp.com>
Using the NOP instructions to do timing control on some physical board
such as ehl_crb, up_squared and intel adsp board, that doesn't work.
It seems like it can only be used for instruction alignment purposes.
We skip this test on this board because it's not meaningful.
Fixes#35971
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
k_timeout_t was converted to ticks using a nonsense function
causing poll timeout corruption for offloaded sockets; this
commit uses ticks directly from the struct instead.
Fixes#37472
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
According to MbedTLS API documentation, its session must be
reset if mbedtls_ssl_handshake returns timeout error. This
commit resets the session for said return value, and that
allows us to call send() multiple times even if handshake
times out for previous calls.
Fixes#35711
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
This is a follow-up to commit 3656ba5ae9.
Enable pull-up resistors on UART pins RXD and CTS in Nordic DK boards
where it is possible that these pins are not connected to anything on
the board and could generate problems if left floating (on some DKs
also the Interface MCU can be disconnected with the switch "nRF only",
hence pull-ups enabled also on uart0 for them).
Those pull-ups can still be disabled (by deleting the added properties)
if necessary to use a given board in some specific hardware setup.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 3656ba5ae9.
Do not enforce pull-up resistors to be enabled on RXD and CTS pins
in nRF UART drivers, as in certain hardware designs this may be
undesirable or may even make certain hardware not working.
Instead, provide devicetree properties that allow enabling of those
resistors when it is actually needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Document the new DT_FOREACH_OKAY_INST_<compat> and
DT_FOREACH_OKAY_INST_VARGS_<compat> macros that are generated by
gen_defines.py and explain how they are used in devicetree.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add two new for-each macros:
- DT_FOREACH_STATUS_OKAY(compat, fn)
- DT_FOREACH_STATUS_OKAY_VARGS(compat, fn, ...)
These can be used to expand "fn" once for every status "okay" node in
the devicetree which has a given compatible. The intended use case is
to allow doing something in C once for each node of a compatible,
but outside of a device driver.
E.g. an application might want to collect an array of structures for a
compatible, where each structure is initialized from a node.
In such cases we don't want people to be forced into using
DT_DRV_COMPAT and instance numbers, because that's in general a hint
that you're doing something driver-like.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add some helper macros that work similarly to the
'DT_FOREACH_OKAY_INST_<compat>(fn)' macros, except they give 'fn'
node identifiers in their expansion instead of instance numbers.
This makes it possible to add for-each APIs to devicetree.h that work
on an arbitrary compatible, not just DT_DRV_COMPAT.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Split the generic tests for DT_INST_FOREACH_STATUS_OKAY() out of the
function which tests it as applied to device instantiation.
This is just moving code around as prep work for expanding on the set
of macros which are in for-each-node style.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The commit
6fe9e408ab (tests/cbprintf_fp: Filter on CONSOLE_HAS_DRIVER)
added filtering on Kconfig symbol incorrectly - it checked
CONSOLE_HAS_DRIVER instead CONFIG_CONSOLE_HAS_DRIVER so
this test was filtered out (and therefore skipped) on all
platforms.
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The 32KHz crystal used is a tuning fork crystal which can have a larger
clock drift over temperature than an AT cut crystal, therefore the LFXO
clock source error rate needs updating to account for this possible
drift over temperature.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
We had added a break in a switch statement that stopped
ISO channels from setting the BT_CONN_CLEANUP flag
which in turn stopped them from disconnecting (in the
eyes of the upper layers) properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of just writing "err" we make it clear that it is
the ISO server that failed to accept.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
GATT/SR/GAD/BV-03-C will read attr value, but we parse NULL
from `attr->read` which point to `attr_read` function.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Driver's RX thread can wait some time before a free buffer is available.
When resources are limited we can easily run out of them.
Fixes#36891.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Modified test to handle case when counter handlers are called in
ZLI interrupt context where kernel primitives cannot be used. In
that case volatile counters are used to track number of handlers
calls.
Added configuration for nrf52840dk board where zli feature is enabled
for all counters.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended driver configuration in device tree to enable ZLI interrupt.
When zli is set in the device tree then event handlers for alarm and
top is called in ZLI interrupt context. It means that kernel primitives
cannot be used there.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended driver configuration in device tree to enable ZLI interrupt.
When zli is set in the device tree then event handlers for alarm and
top is called in ZLI interrupt context. It means that kernel primitives
cannot be used there.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add missing otPlatTimeGet implementation which is needed for proper
calculation the time offset in host-RCP communication.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The filter_py() function is handed a bunch of file names and is
expected to give back just the python files.
Its input is the output from a 'git diff' command which normally when
used in the vanilla zephyr repository just prints regular files.
In situations where we're checking compliance on a repository with
submodules, however, filter_py() can be given directories in the
'fnames' list from the git output.
In the interests of being defensive and sharing infrastructure, just
handle this case in filter_py().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixup the doxygen comments for return values on `_dt` functions.
@retval should only be used when specifying actual return values,
@return is more general and can refer to other functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
With the last changes in USB device stack it was unfortunately
not considered that an interface can have no endpoints.
This caused the USB DFU class to stop working in DFU mode.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Before entering initialization mode, we left sleep mode, then request
to leave again sleep mode before returning from can_stm32_init() is
useless.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Disabling the time-triggered communication mode (TTCM) is done twice in
the setting of the master control register (MCR). So, let's remove the
second.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
The driver only support use case where the channels are used in mutual
exclusion.
Origin: Original
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
This guideline seems to be missed during the Zephyr's code guideline
creation. That is a good guideline that aims to address some problems
like double free or freeing not allocated memory.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This guideline address three undefined behaviors listed in the C99
standard. Although Zephyr does not support/implement these functions,
they are part of the C library and could be implemented in the future.
Also this is mandatory rule in MISRA-C and if one day Zephyr decides to
claim compliance with MISRA-C this guideline has to be followed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The addition of image number parsing, in mcumgr library, requires
increase in the stack size for the smp_svr to work.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds chapter, to the documentation, that explains
how to select target image to upload, and how does the image number
maps to the DTS image defintion and the slot number.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Commits affecting Zephyr that are included with the new revision:
4fa8691 zephyr: Allow to select slot for DFU as image
d8802de samples/smp_svr/zephyr: Update stack size
e71063a zephyr: Improve and rename img_mgmt_find_best_area_id
e215d26 zephyr: Check area id in erase slot processing
71c76f5 zephyr: Upload should use g_img_mgmt_state
afa95ba cmd/img_mgmt: Call dfu stop cb on erase
6a10fa6 img_mgmt: Add interpretation of "image" parameter
757965c samples: smp_svr: zephyr: Update MTU Kconfig values
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add implementation to resume primary PDU scanning window
after use of LLL scheduling to receive auxiliary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Auxiliary PDUs are scanning by the primary scan's LLL
scheduling, then flush the Auxiliary PDUs when processing
them in the ULL instead of using the disabled callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This can be used to check if pointer is a valid lll_scan_aux pointer,
e.g. if we need to decide what kind of struct is attached to RX node
for further processing.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to reset isr status before returning as otherwise irq will be
triggered over and over again.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for issue 34879.
Microchip MEC GPIO hardware can trigger a spurious interrupt when
interrupt detection is set to edge mode especially falling edge mode.
Clearing the status immediately after enabling interrupt detection does
not work because the hardware takes a small number of AHB clocks to
set the status. After interrupt detection enable we use an ARM data
memory barrier to insure the write completes before clearing spurious
status and enabling the interrupt in the GIRQ.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Fix potential bug when returning error codes not handled by
OpenThread in `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix bug in adv timeout for limited advertiser when extended advertising
features has been enabled. The advertiser was only stopped when
configured as an extended advertiser. It should be stopped when
configured as a legacy advertiser also.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate the xoroshiro128+ PRNG algorithm in favour of xoshiro128++.
xoshiro128++ is a drop-in replacement which is invisible from the user
perspective.
xoroshiro128+ is unsuitable because it is explicitly a floating-point
PRNG, not a general-purpose PRNG. This means that the lower 4 bits of
the output are actually linear, not random (from the designers,
https://prng.di.unimi.it/). This means 1/8th of the generated data is
not random.
Additionally, xoroshiro128+ is not a 32bit algorithm, it operates on
64bit numbers. For the vast majority of Zephyr devices, this makes the
PRNG slower than it needs to be. The replacement (xoshiro128++) is
32bit, with no loss in state space (still 128 bit).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds an implementation of xoshiro128++ as a pseudo random number
generator from https://prng.di.unimi.it/ that operates on 32bit words.
The algorithm postfix signifies the main operation in the generation
function. Therefore xoshiro++ is chosen over xoshiro** as we would
prefer to do 2 additions isntead of 2 multiplications on embedded
hardware. The quality of the generators appears to be the same in all
other respects.
xoshiro+ is not chosen despite being faster as it generates random
floating-point values, not general purpose random values (The lower 4
bits are linear).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit adds flash driver in non-secure mode for stm32l5x
series with icache enabled. This commit also adds a flash
programming error status check applicable for all platforms
except stm32f1 series.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
ZFD_IOCTL_POLL_OFFLOAD operation needed special handling, as it needed
to modify the fds table for the offloaded implementation, overwriting
websocket file descriptors with the underlying offloaded ones. This is
only needed for the offloaded sockets, as the native implmentation use
POLL_PREPARE/UPDATE operations instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The websocket implementation of ioctl wrongly passed websocket context
to the undrelying `ioctl` implementation instead of the context of the
underlying socket.
Additionally, currentl implementation used the vtable of the native
socket implementation unconditionally, making it unusable with an
offloaded underlying socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for FORCE_SUSPEND and LOW_POWER actions. Even though these
actions have no clear meaning, they are added for compatibility until
their associated states are discussed. Their usage in new code should be
discouraged until the associated states are clarified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If a device does not support, for example, the suspend action the
subsystem should just ignore the device.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a type and documentation for the device PM control callback. This
way possible return codes and its meaning are documented.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to the documentation the OFF state has to be used when the
devices is fully turned off, ie, power removed. Most drivers were using
a sort of fall-through for all non-active states, leading to behaviors
not following the specifications.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The difference between low power and suspend states is a thin blur line
that is is not clear and most drivers have used indistinctly. This patch
converges to the usage of the suspend state for low power, since
contrary to the low power state, it is used by both system and runtime
device PM. The low power state is still kept, but its future is unclear
and needs some discussion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some devices are using PM_DEVICE_STATE_FORCE_SUSPEND as a sort of low
power state, something that is not correct. In fact, this state is not
an actual state and will be eventually moved, if found necessary, to an
action or command.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM control function will only be called if the requested
state is different from the current one. A significant amount of drivers
were checking for state changes, now unnecessary. This patch removes all
this redundant logic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If the device is already at the given state, do not call the device PM
control function. This makes sure that devices are only called to change
from one state to another.
Even though asynchronous device PM is completely broken, transitional
states are considered too.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Improve the docstrings of the pm_device_state_set function and change to
shorter argument variable names.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the received Extended Advertising PDU's address
resolution latency due to missing reset of pending IRQ in
the NVIC which caused the wait loop from not exit correctly.
Fixes#30243.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When generating LE Extended Advertising Report the device
address can be either in primary or auxiliary channel PDU,
do not overwrite resolving list index if present in primary
channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup standard device request handler.
Pass pointer to setup packet as argument where
it is reasonable.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Cleanup standard device request handler.
Pass pointer to setup packet as argument where
it is reasonable.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The sample only supports device-to-host control requests.
Return -ENOTSUP on host-to-device control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This class does not handle any vendor request,
therefore just return -ENOTSUP on any vendor request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HCI commands are always directed to controller and should be
host-to-device class control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Return ENOTSUP if request is unsupported and pass on the error
from encapsulated command/response functions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Control request handler from CDC ECM implementation does not
care at all about returning errors when a request is not supported.
Return EINVAL/ENOTSUP if request is incorrect/unsupported.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Set data stage length variable to zero as a precaution
so that no trouble happens if control request handler
does not check the request values sufficiently.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add variants of all i2c transfer functions that accept an `i2c_dt_spec`
as the bus specifier. This helps reduce code duplication in device
drivers.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Introduces the `struct i2c_dt_spec` type, which contains the complete
I2c bus information derived from devicetree. It serves the same purpose
as `struct spi_dt_spec` in that it can be constructed automatically in
`DEVICE_DT_INST_DEFINE` macros and provided as a single handle to I2C
API calls. While I2C has much less instance configuration than SPI, this
is still useful to enable the following pattern in device drivers that
support both I2C and SPI comms:
```
struct config {
union {
struct spi_dt_spec spi;
struct i2c_dt_spec i2c;
};
};
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the Microchip XEC pinmux driver to use system I/O
routine for read/write of registers instead of direct use
of volatile and CMSIS defines. Add GPIO port number to
bindings instead of using hard coded value from chip headers.
Modify SoC DTSI pinmux syntax, requires "pinmux: pinumx {..."
or the DT macros will not work. Since pinmux is used by MEC152x
we update its chip pinmux DT.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add support for TI TLC59108 an I2C 8-bit LED driver.
Supported blinkink period: 41ms to 10730ms
Supported brightness value: 0 to 100%
This driver supports the following APIs:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
This is a modified version of the NXP PCA9633 driver.
Signed-off-by: John Kjellberg <kjellberg.john@gmail.com>
Redefine the APIs used to deal with iterable sections to an alias
without the Z_ prefix, so that they can be used by Zephyr applications.
Fix the associated comments so that they are handled correctly by
Doxygen.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Linker APIs are defined in a "#ifdef _LINKER" block. Adding _LINKER to
the Doxygen PREDEFINED list so that they get picked up when generating
the documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It is enough to set the USB_DEVICE_STACK option to enable
USB device support.
Remove USB_DC_STM32 for mikroe_mini_m4_for_stm32 board
since it is already selected on SoC level.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
It is enough to set the USB_DEVICE_STACK option to enable
USB device support. Also the option USB_NRFX is not necessary
here because it is selected in drivers/usb/device/Kconfig anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The USB option alone only caused the driver to be built
and actually has no benefit. Remove it from *_defconfig files.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace USB configuration option with USB_DEVICE_DRIVER
since on the SoC level the specific driver is selected.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The USB configuration option is actually a global switch
to enable USB drivers in general, but currently only
the device controller drivers are meant.
USB device controller drivers also have USB_DEVICE_DRIVER option.
Thus the option USB is actually redundant and can be replaced
by the self-explanatory option USB_DEVICE_DRIVER.
The name USB itself is not unique and should not be used as an
configuration option.
With these changes the option USB_DEVICE_DRIVER generally
enables USB device controller drivers. The option USB_DEVICE_STACK
enables USB device support. It is sufficient to enable only option
USB_DEVICE_STACK because it selects USB_DEVICE_DRIVER.
CONFIG_USB Kconfig option is temporary added to subsys/usb/Kconfig.
This is necessary to pass CI and will be removed again
when the USB configuration has been adapted in modules.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Test for dropping log messages was expecting certain number of
dropped messages assuming that buffer size is dividable by the
message size. That was not the case when timestamp was 64 bit.
In that case, additional message is dropped.
Modified the test to take that into account.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is mainly for testing purposes where logging is multiple times
reinitialized.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Create a "global" gen_defines.py option and edtlib.EDT constructor
kwarg that turns edtlib-specific warnings into errors. This applies to
edtlib-specific warnings only. Warnings that are just dupes of dtc
warnings are not affected.
Use it from twister to increase DT testing coverage in upstream zephyr.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
An unknown vendor prefix is now a warning. We augment the list of
vendor prefixes passed by the user with a grandfathered-in bunch from
Linux.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use a comment syntax instead of a separator. This is a bit cleaner
and is prep work for moving the parsing code to a more generic place,
namely edtlib.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update our vendor-prefixes.txt file to match the data in upstream
Linux's vendor-prefixes.yaml file as of Linux commit
8ac91e6c6033ebc12c5c1e4aa171b81a662bd70f.
(We can't easily switch to using the Linux YAML file directly because
our documentation tooling depends on this plain text format.)
The changes were done using a script and then cleaned up by hand in
order to not throw away any Zephyr-only prefixes, and to manually
override Linux in some cases.
List of Zephyr-only prefixes, all of which were kept:
asmedia
cadence
gaisler
lairdconnect
ovti
openisa
particle
quicklogic
ruuvi
segger
vnd
weact
zephyr
Other things to note:
- keep Espressif as 'espressif', overriding Linux's 'esp'
- 'gw' is deprecated in Linux and is unused here; just remove it
- ROCKTECH DISPLAYS LIMITED SHOULD HAVE BEEN ALL CAPS;
HOW COULD WE POSSIBLY HAVE MISSED THIS BEFORE?
- Did not include '70mai' from upstream, as that violates the legal
compatible regexp
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix key distribution not calling pairing complete callback when
distributing encryption information when not bonding.
Encryption information is only distributed in legacy pairing so issue
was only seen during legacy pairing.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
based on uart rom functions, also enable console driver
on top if this driver enabling logging
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Handle serial numbers provided from the command-line instead of forcing
the user to provide 'tool-opt' manually.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The LL_ADC_ConfigOverSamplingRatioShift function for
the stm32H7xx soc serie differs from other for the 'ratio':
"This parameter can be in the range from 1 to 1024"
Note that in the stm32h7xx_ll_adc.c the LL_ADC_OVS_RATIO_xxx value is
defined for ADC of type ADC_VER_V5_V90.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A mutex is used to syncrhonize the start, stop and service() functions
of the RD client. Previously it could happen that while service() was
working on e.g. bootstrapping, a stop() call by another thread would
close the socket. Then the bootstrapping process would detect it as a
network error, and restart the process.
Fixes#37170.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
The existing extension tree does not support all the features that are
defined by the specification (e.g. multiple parents).
This patch approaches this problem by defining a circular single-linked
list of extension models. So for a given model, all models that are on
the same list as that model are in some extension relationship with that
model. All models on a list represent a single connected component of an
extension graph but without defining specific relationships between each
pair of models. This list is used to manage a shared subscription list
as per the Mesh Profile Specification:
```4.2.4 Subscription List
Within an element, each model has a separate instance of a Subscription
List, unless the model extends another model on that element. Instances
of models that extend other models (i.e., all models within an extension
relation tree) shall share a single instance of a Subscription List per
element.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The host interface type (eSPI/SHI) is selected via HIF_TYP_SEL field in
DEVCNT register. This commit adds a function to set it.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The booter (bootloader) behavior may be different in different NPCX
chip series. One example is that the booter sets host interface type in
NPCX7 series but leave the firmware to set it in NPCX9 series.
This commit adds a new DT node to record variants in its properties.
NPCX drivers can understand if they need to configure the related
setting by checking the node's properties.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Current default serial port used for flashing is
/dev/ttyUSB0. This changes that to automatically detect the device
serial port or uses the one exported to the environment.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The Bluetooth Core spec 5.2 requires to provide CTE type in
periodic advertising report.
The implementation of le_per_adv_sync_report assigned
value zero to be default CTE type. The assigned value
in Bluetooth Core spec 5.2 means "AoA Constant Tone
Extension". In case there is no CTE attached to periodic
advertising PDU, CTE type should contain value 0xFF.
This commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix compilation warning in hci_df_set_cl_cte_rx_enable function.
The struct bt_hci_cp_le_set_cl_cte_sampling_enable *cp variable
was used just to evaluate size in bt_hci_cmd_create call.
The variable is moved to prepare_cte_rx_enable_cmd_params
function and size of the buf is evaluated directly from type.
Code is simpler and prepare_cte_rx_enable_cmd_params does not
require passing additional argument.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Zephyr is now able to convert ELF binary to the EFI application for
launching directly from the EFI firmware. The bootloader is not needed
and the information about grub was removed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since Zephyr supports EATT, which is reflected in ICS GATT_2_3
(Enhanced ATT bearer Attribute Protocol Supported (L2CAP fixed EATT PSM
supported) and GATT_2_3a (Enhanced ATT bearer supported over LE)
in GATT tests preamble 4.2.1.4 (Setup EATT Bearer over LE) is used
instead of 4.2.1.2 (Setup ATT Bearer over LE). Let's enable
EATT by default, allowing to run almost all GATT tests without
additional overlay.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The _value in BT_GATT_ATTRIBUTE was misleading as
it cannot be generically used a attribute value,
and actually is a user_data pointer.
The macros BT_GATT_CPF, BT_GATT_CEP and BT_GATT_CUD was
also update to more accurate describe the expected
type of value for the macros.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update doxygen usage of `@retval` to specify the value for each case,
instead of a chain of logic from the one `@retval`.
https://www.doxygen.nl/manual/commands.html#cmdretval
Convert `@retval`'s that simply reference another function to `@return`.
Convert some custom notes to `@note`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The default CONFIG_APIC_TIMER_IRQ_PRIORITY is 4, but it should be 1 for
ACRN. That's why the testcase failed due to no timer interrupt was
triggered.
And we also temporary adjust the testing IRQ for dynamic isr due to it
conflict with the IRQ of the APIC TSC deadline TIMER.
Fixes#36203.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
for up_squared board, we already support to use UEFI bootable
method to run zephyr tests, so update the document to use
this UEFI method, rather than legacy BIOS stuff.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Deprecate usb_common.h and usbstruct.h headers in 2.7 release.
Deprecate DESCRIPTOR_TYPE_BOS macro.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use macros and types from usb/usb_ch9.h header where it
is possible. This patch also adds local macros, USB_REQTYPE_GET_DIR
and USB_REQTYPE_GET_TYPE, which is an intermediate solution and
these will be removed later.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add header file where all defines and structures
from Chapter 9 (USB Device Framework) should be included.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
It is desirable to have the read and write like functions follow the
POSIX read and write parameter types.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
There were missing calls to periodic advertising functions:
lll_adv_sync_init() and lll_adv_sync_reset() corresponding
functions in lll_adv.c.
Lack of those calls didn't introduce any harm.
I've added them to have complete init and reset patch,
similar to extended advertising implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There is missing handling of periodic advertising reset for
HCI_Reset command. That makes impossible to execute e.g.
qualification tests without rebooting of the DUT
for periodic advertising and direction finding.
This commit adds missing implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Extends memory footprint tracking to include echo_client and echo_server
networking samples on the frdm_k64f board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The commit moves definition of Zephyr specific mcumgr basic group to
PERUSER - 1. This has been done to avoid collision with application
specific groups, defined by users.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
There is no need to include nrf_clock_control.h so remove it as
this fixes a build issue when trying to compile this sample on
litex_vexriscv.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
dtc v1.6.1 produces an error without specifying #address-cells
on an interrupt-controller node.
Fixes#36495
Signed-off-by: Eric Johnson <eric@liveathos.com>
Add watchdog support to the mimxrt685 platform.
The mimxrt685 platform is excluded from the watchdog
test case because the test case uses variables in the
noinit section that need to be retained through a reset
but the rt685 does not retain this memory through a
reset.
Signed-off-by: David Leach <david.leach@nxp.com>
* Move definition of flexspi_nor_config_t into soc/ dir so it can
be shared by all i.MX RT based boards.
* Use Kconfig symbol CONFIG_NXP_IMX_RT_BOOT_HEADER instead of
HAL define (which is set based on the Kconfig symbol)
* Rename board files to flexspi_nor_config.c since they
are already namespaced by the board dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes an issue that surfaced with Zephyr v2.6.0,
where the GPIO driver has not completed initialization
when attempting to use it during POST_KERNEL with
KERNEL_INIT_PRIORITY_DEFAULT.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
When building tests/drivers/build_all/modem on native_posix_64 we get:
modem_cmd_handler.c:545:9: error: ret may be used
uninitialized in this function
[-Werror=maybe-uninitialized]
Fix by adding simple initialization of ret = 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make correction on the terms "intput" appearing
in sciripts/pylib/twister/twisterlib.py to "input" for all.
This type of misspellings may cause another unnoticeable misspellings,
when propagated by code completions.
(assuming that the "intput" was intended
to have the opposite meaning of "output",
which also appear on the same areas)
Signed-off-by: Kentaro Sugimoto <tarotene@gmail.com>
This commit extends size of stack used by IEEE 802.15.4 radio
temperature sensor. This commit fixes stack overflow issue in
echo_server sample for OpenThread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The Texas Instruments TCA9538 is an 8 pin GPIO port expander.
It operates on an I2C bus with 2 configurable address pins. The
device has an interrupt output pin that is asserted when any pin
configured as an input changes state.
Added under the PCA953X name to allow other similar parts to
use the same driver.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
The local function has been missing static specifier.
The commit also removes unused STORAGE_MGMT_ID_ERASE define.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
We cache the current thread ID in a thread-local variable
at thread entry, and have k_current_get() return that,
eliminating system call overhead for this API.
DL: changed _current to use z_current_get() as it is
being used during boot where TLS is not available.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The TLS global pointer is only set during context switch.
So for the first switch to main thread, the TLS pointer
is NULL which would cause access violation when trying
to access any thread local variables in main thread.
Fix it by setting it before going into main thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
After powering-on the sensor, and before every measurement, it loads
the NMV. We must wait until this process is completed otherwise
we will read weird values.
Since it was observed that the time may be a bit long after a cold
start, it is more convinient to just wait until the sensor iready,
without a timout.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
To ensure that we have the same behaviour with a power cycle
and by pressing the reset button, we can perform soft reset
in `bme280_chip_init()`.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
In the current code the naming of the
CONFIG_RPMSG_MULTI_INSTANCE_?_IPM_{TX,RX}_NAME symbol is 1-based. While
this is not currently an issue, it could easily become such if the
symbol is programmatically used as part of a preprocessor enumeration
(for example when using DT_INST_FOREACH_STATUS_OKAY(...) & co).
To avoid trouble, just make the index starting from 0 instead than 1.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a sample that shows how to use in Zephyr nRF peripherals that
share the same ID and base address. Such peripherals cannot be used
simultaneously, but it is possible to switch between them. However,
currently it is not possible with Zephyr APIs, only using nrfx drivers
directly. This sample shows how to realize such switching for selected
peripheral instances while using standard Zephyr drivers for others.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extract functions which are managing logging sources
and backends into separate file: log_mgmt.
So far those functions were in log_core mixed with functions
specific to log message creation and log processing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There was an issue with receiving CTE packets when the time
slot has changed from 2us to 1us. After receiving the packets
when it tries to enable receiving of CTE, the validator
returns EINVAL error.
Source of the problem is "validate_cte_rx_params" function,
it calls DF_AOA_RX_1US_SUPPORT(df_ant_info.switch_sample_rates)
which is expanded to:
((df_ant_info.switch_sample_rates) & BIT((BT_HCI_LE_1US_AOA_RX)))
And due to definition of BT_HCI_LE_1US_AOA_RX in hci.h it will be:
((df_ant_info.switch_sample_rates) & BIT(BIT(2)))
So the BIT operation has executed two times.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
Microchip MCP7940N is a Real-Time Clock/Calendar. It operates on a I2C
bus. It can be used to set a calendar time and has two alarm channels.
When an alarm is asserted the state of the MPF pin of the MCP7940N will
change (depending on gpio active high/active low setting) to trigger an
interrupt.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
This reverts commit 40a5cf6016. Debug
information is no longer necessary as doc-publish workflow is now
working correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Atmel sam0 sercom[uart] pinctrl bindings and implements pinctrl at
driver level. It changes all sam0 boards to use new feature and remove
pinmux driver dependency for sercom[uart]. The samples that require a
binding were update to keep consistency and avoid errors.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Introduce soc_port common functions. The sam0 pinmux driver was
refactored to use soc_port_pinmux_set common function.
This create the common base to implement sam0 pinctrl functions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Adds support for PWM LEDs (red, green, blue) to the mimxrt685_evk board
by adding devicetree nodes and aliases, and configuring the associated
pinmuxes. The red PWM LED is disabled by default because it's connected
to the same PWM channel as the blue PWM LED.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable debug mode and disable quiet option. It should help diagnosing
AWS S3 problems. Some prints have also been added to spot potential
problems.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
`github.event.workflow_run.head_branch` contains the actual release tag
on releases, so it is required. It does not affect the publication of
"latest".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add old APIs marked as deprecated. The API keep the same behavior as
before, so external users have time to migrate their codebase.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Explain device busy API name changes and provide an equivalence list to
ease migration.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Use an enum for the available flags
- Use ATOMIC_DEFINE macro to declare the flag bit field
- Improve naming
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test_dummy_device test has nothing to do with device busy testing,
so remove the calls to pm_device_busy_set/pm_device_busy_clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Publish action has been refactored into a workflow_run based action.
The action is now triggered after a successful doc-build workflow run
(only on main/release branches). The artifacts are downloaded from the
build run and published accordingly. Publish code has been simplified a
bit and PDF upload has been added.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Artifacts will be required for the publish workflow, so do not let the
build workflow succeed without them being uploaded correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Storing west version in a single place avoids keeping duplicates in each
job. Also added a note on why pinning version is important: west
docstrings are extracted from the installed version.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The pip cache should be discarded if any of the required dependencies
changes, so use the hash of the requirements file as a key source.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
xz compression reduces the html archive sice from ~350MB to ~90MB (at
the cost of more compression time). Compression has been moved to a
separate step.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow to override latexmk options via Makefile. Defaults match those in
the CMakeLists.txt.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some devicetre overlays do not reflect the recent rename to make NS
variants of boards with TF-M support have more consistent names; fix
it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
TI recently released a new version of the HDC2080 datasheet, which
slightly update the temperature conversion formula, with a temperature
offset of -40.5°C instead of -40°C. Adjust the code accordingly.
In addition the datasheet also describes a voltage dependent
compensation of -0.08°C/V above 1.8V, however it's not something easily
doable with the current sensor framework, so just ignore that part.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some STM32 series (l0, g0, f0) needs to enable clock of
DBGMCU peripheral, before accessing registers
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Microchip HAL update used by MEC152x projects with eSPI
definition changes. Remove hack from XEC ESPI driver since
the missing symbol is in the HAL.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The STM32 G0, G4, H7, L0, L4, WB and WL series have hardware support for
oversampling. This patch adds support for it, using the oversampling
value provided in the adc sequence. The result is shifted right
accordingly to not change the resolution of the measured value, like it
is done on other ADC drivers.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds the configuration to pass the testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f103rb board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass tes testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f207zg board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration and set the DTS to pass
the dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f429zi board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_l152re board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testscases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f091rc board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Create a shared macro to access the pinctrl_0 property. The pinctrl_0
property includes pinmux phandle, pin and alternate function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Increase LOG_PROCESS_THREAD_STACK_SIZE for ARCv3 64 bit to
fix failing test
tests/subsys/logging/log_core_additional/logging.add.async
due to stack overflow.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This commit sets the below configuration when
tests/drivers/dma/chan_blen_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_TRANSFER_CHANNEL_NR_0=4
CONFIG_DMA_TRANSFER_CHANNEL_NR_1=2
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit sets the below configuration when
tests/drivers/dma/loop_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_LOOP_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR=4
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Driver does not correctly take ic out from sleep mode on init.
Added logic to update mode register on init to take the leddriver
out from sleep mode.
See datasheet for register details.
Fixes#37180
Signed-off-by: Daniel N. Hansten <dnh2000@gmail.com>
Busy simulator is using counter device and entropy device to
generate random cpu load. Counter device cofiguration can be
used to set cpu load interrupt priority and optional pin that
can be set during the load.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
On R-Car the Cortex R7 is usually not the boot processor.
This configuration file make use of the Cortex A57 processor,
to initialize the Cortex R7.
It boils down to few steps:
- Apply power to the Cortex R7
- Set the boot address for the Cortex R7
- loading a firmware
- releasing the Cortex R7 reset
This configuration file also rely on A57 bootloaders,
to initialize device, memory, and security groups.
This file has been tested on openocd 0.10.0+dev-01508-gf79c90268-dirty,
shipped with zephyr sdk 0.12.4, and on openocd master
65c9653cc768f77a5e8cf2af73e0f40d614bdec2.
Thread awareness is possible thanks to this patch:
http://openocd.zylin.com/#/c/6369/
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
When in le_ecred_reconf_req multiple CIDs are received host should
return 0x0002 error (Reconfiguration failed - reduction in size of
MPS not allowed for more than one channel at a time).
This affects test L2CAP/ECFC/BI-04-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
In limited advertising advertising should end after certain timeout.
Previously, limited advertising was just general advertising with
BT_LE_AD_LIMITED flag set. Now, if this flag is set the work is
scheduled, that will disable advertising after timeout.
This affects tests GAP/DISC/LIMM/BV-03-C and GAP/DISC/LIMM/BV-04-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Add clock_control driver to stm32u5 support.
For this series, now deprecated STM32 clock Kconfig symbols
are not added.
Due to a divergence in MSI clock definition, PLL1 use
instead of PLL and lack of sufficient abstraction abstraction
for these a dedicated file has been added.
This should be reshuffled:
- once a better abstraction is provided by LL API for these
- when some stm32 clock control driver rework will be done
after complete removal of Kconfig STM32 clock symbols.
Tested in MSI, HSI, PLL based HSI and PLL based MSI.
Not tested on HSE due to lack of compatible hardware.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add initial basic description for Cortex-M33 based
stm32u5 soc series.
This encompass description for base nodes, such as:
- cpu
- flash
- clocks
- sram
Additionally, provide description for variant stm32u575Xi.
Related to clocks nodes, added bindings for stm32u5 specific
rcc node as well as msi and pll clocks.
Header file stm32_clock_control.h was also updated to support
these new bindings.
Note that for compatibility with existing definitions, clock
node describing main pll clock, known as "PLL1", was given two
labels: "pll" and "pll1".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds support for testing of persistence storage
for mesh Babblesim tests. Adds a sample test
for testing provisioning data.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The type of DMA for the stm32f0 devices was wrong
Its DMA is of type V2bis where the peripheral request is fixed.
The corresponding DMA cell has 2 elements.
The stm32f091 has two DMA instances.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixed the following assertion causing by high level functions
enable gpio interrupt at the same pin at least two times:
ASSERTION FAIL [!arch_irq_is_enabled(irq)]
@ ZEPHYR_BASE/arch/common/sw_isr_common.c:84 IRQ xxx is enabled
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Various non-secure variants of boards with SoCs that have Trusted
Firmware M support were recently renamed without any deprecations
added for the old names. This unnecessarily breaks the build for out
of tree users.
Fix that by adding the following deprecations (deprecated name ->
replacement name):
bl5340_dvk_cpuappns -> bl5340_dvk_cpuapp_ns
mps2_an521_nonsecure -> mps2_an521_ns
musca_b1_nonsecure -> musca_b1_ns
musca_s1_nonsecure -> musca_s1_ns
nrf5340dk_nrf5340_cpuappns -> nrf5340dk_nrf5340_cpuapp_ns
nrf9160dk_nrf9160ns -> nrf9160dk_nrf9160_ns
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is more or less the flow of AT+CIPSEND:
RX TX
-- --
AT+CIPSEND=<...>
OK
>
<data to be sent>
SEND OK / SEND FAIL
'sem_response' semaphore is released by receiving 'OK'. Then after
receiving '>' (which releases 'sem_tx_ready' semaphore) actual data is
sent. Waiting for 'SEND OK' or 'SEND FAIL' is implemented by waiting on
'sem_response' (the same as for 'OK'), which mean that resetting this
semaphore just after sending all data is racy.
Fix that race condition by resetting 'sem_response' just after receiving
'OK', so that neither 'SEND OK' nor 'SEND FAIL' will appear yet (they
will not be sent as long as we won't send whole payload).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Sending AT+CIPSEND=<...> command results in following reply:
OK
>
modem_cmd_send_nolock() invocation was setting command handlers for '>',
but as 'OK' was received first, it was handled as a generic reply. After
receiving 'OK' this function was unsetting command handlers. Then
modem_cmd_handler_update_cmds() was called once again in order to
register '>' handler once again. There was a small period of time where
'>' was not being handled at all.
Fix that race condition by using just introduced modem_cmd_send_ext(),
which allows to leave commands handlers in place and get rid of race
condition where expected command could be missed.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There are currently modem_cmd_send() and modem_cmd_send_nolock()
functions, each with slightly different behavior regarding acquiring (or
not) sem_tx_lock. Introduce a generic function that will allow caller to
select behavior using flags.
While at it, add possibility to disable setting and unsetting command
handlers. This will be useful in situations when there are multiple
replies expected one after the other coming as a response to single
command. This is the case for example with ESP-AT driver, which expects
following data as response to AT+CIPSEND command:
OK
>
where 'OK' is handled by static CMD_RESP (so releasing response
semaphore right away), while '>' is handled by dynamic
CMD_HANDLER (which is releasing another semaphore). Keeping command
handlers in place allows to receive '>' without race condition because
of small period of time where command handlers are not set.
Convert modem_cmd_send_nolock() and modem_cmd_send() to static inline
functions, as they are just a specific invocation of
modem_cmd_send_ext() function.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Cleanup an #ifdef statement in swap_helper.S; use
ARMV6_M_ARMV8_M_BASELINE instead of listing all
Cortex-M baseline implementation variants. This
fixes an issue with Cortex-M23 whose Kconfig
define was not included in the original list.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding a new test-suite for HardFault validation,
for Cortex-M Mainline architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When inside an escalated HardFault, we would like to get
more information about the reason for this escalation. We
first check if the reason for thise escalation is an SVC,
which occurs within a priority level that does not allow
it to trigger (e.g. fault or another SVC). If this is true
we set the error reason according to the provided argument.
Only when this is not a synchronous SVC that caused the HF,
do we check the other reasons for HF escalation (e.g. a BF
inside a previous BF).
We also add a case for a debug event, to complete going through
the available flags in HFSR.
Finally we ASSERT if we cannot find the reason for the escalation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the assessment of a synchronous SVC error into a
separate function. This commit does not introduce any
behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Clean up a few more hard-coded constants
in swap_helper.S and replace them with
CMSIS-like defines in cpu.h. No behavioral
changes in this commit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When locking interrupt in a critical session, it is
safer to do MSR BASEPRI_MAX instead of BASEPRI. The
rationale is that when writing to BASEPRI_MAX, the
writing is conditional, and is only applied if the
change is to a higher priority level. This commit
replaces BASEPRI with BASEPRI_MAX in operations that
aim to lock some specific interrupts:
- irq_lock()
- masking out PendSV
So, for example, it is not possible to actually
unmask any interrupts by doing an irq_lock operation.
The commit does not introduce behavioral changes.
However, it makes irq_lock() more robust against
future changes to the IRQ locking mechanism.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Baseline Cortex-M requires VTOR to be aligned on 64-word
boundary. That is because bit-7 of VTOR is also RAZ/WI.
The commit updates the vector table section alignment for
Baseline Cortex-M to reflect the implementation constraint.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the implementation of z_platform_init from the NXP Hal
into the main Zephyr tree. This function is Zephyr-specific,
is part of the Zephyr module glue code, and does not need to
reside in the module repository. We also rename the function
to z_arm_platform_init. The commit does not introduce any
behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is define in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Platform specific initialization during early boot
has been a feature supported only by Cortex-M; the
Kconfig symbol is defined in arch/arm Kconfig space.
We rename the z_platform_init() function to
z_arm_platform_init(), to indicate more clearly that
this is an internal, private ARM-only API.
This commit does not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a test case to verify that triggering a
PendSV will lead to a Reserved Exception and
a CPU error, in the no-multithreading case.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the DebugMonitor extension is implemented by the core,
the interrupt may be pended and become active, even if it
is not enabled. Set the priority level of DebugMonitor upon
system initialization to the intended value unconditionally
so we do not end up in undefined behavior, if the exception
is accidentally pended. Since the priority level is set at
init, we can remove resetting the priority in DWT driver
initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When the SoC implements SysTick, but the system
does not use it as the driver for system timing
we still need to set its interrupt level. This
is because the SysTick IRQ is always enabled,
so we must ensure the interrupt priority is set
to a level lower than the kernel interrupts (for
the assert mechanism to work properly) in case
the SysTick interrupt is accidentaly raised.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the PendSV interrupt is not used by Zephyr (this is
the case when we build with single-thread support) we
route the interrupt to z_arm_exc_spurious, instead of
assigning 0 to the vector table entry. This is because
the interrupt is always enabled and always exists, so
it is safer to always get the proper error report, in
case we accidentally pend the PendSV, for any reason.
We also add a comment in the PendSV priority setting,
explaining why it has to be assigned a priority level
even if it is not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Create z_arm_preempted_thread_in_user_mode to abstract the
implementation differences between Cortex-M and R to determine if an
exception came from userspace.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Create z_arm_thread_is_user_mode to abstract the implementation
differences between Cortex-M and R to determine if the current thread is
in user or kernel mode.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Provide configurations for the nRF52840 DK and nRF5340 DK boards.
Adjust the test to cover specifics of I2S peripherals on nRF SoCs
(need of starting RX and TX simultaneously, lack of internal loopback).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a sample intended to show how to use I2S drivers in processing of
audio streams. The sample starts both the RX and TX streams and adds
a simple echo effect to the received audio signal.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This function takes a node label (not a label property) and returns
true if a node with such label exists and the node is enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a shim that allows using the nrfx I2S driver via the Zephyr API.
Add also missing devicetree nodes representing the I2S peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-i2s" binding with a new property that allows
specifying the clock source to be used by the I2S peripheral (so that
it is possible to use HFXO for better accurracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
A new configuration is available in TF-M, for disabling RNG
independent from key derivation. Introduce a corresponding
Kconfig option to control the RNG API enabling/disabling from
Zephyr.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Minor update to mcuboot to fix the issue with the integration
platforms and allow list in the zephyr boot sample.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a test variant in tfm_ipc test, to validate the
scenario where TF-M is built without BL2 (MCUboot). We
test this on QEMU only (MPS2 AN521).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Due to changes in flash_layout.h for STM32L562, in the current
TF-M module update, we need to modify the DTS overlay files in
the TF-M samples where the board is supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In some platforms, such as the nucleo L552ZE_Q, the hash computation
is done very fast, before the delayed work manages to trigger (and
perform the assert-based validations). Increase the length of the
computations so this race condition can be avoided.
Also, this commit adds some messages in the assert statements for
ease of debugging.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow developers the option of using the DOWNLOAD option
for MCUboot in TF-M bulds with BL2. Using MCUboot from
Zephyr is still the default option.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TFM_MCUBOOT_IMAGE_NUMBER Kconfig option should have
a dependency on TFM_BL2, since it is not applicable
otherwise.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the tfm-mcuboot module in Zephyr (which hosts the
mcuboot version that is used for TF-M builds in Zephyr). We
will force TF-M builds in Zephyr to use the MCUboot version
that any Zephyr builds are using. This will allow Zephyr to
maintain a single mcuboot module version in its default
manifest.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
NS regression tests are hanging on qemu for AN521. The problem is
present in the upstream project as well (issue is filed) so disable
the tests for now on QEMU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Switch to calling the sys_arch_reboot() API directly,
instead of going through the generic sys_reboot API.
This is to avoid locking the IRQs before the reset is
called, which is breaking the PSA call execution.
Also, align sample code to use the same secure service
(platform reset) to show case the PSA connect and close
APIs, instead of a random one (since the reset service
has to work to ultimately perform the system reset).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For TF-M builds on LPCXPRESSO55S69 we set the path to the
NXP HAL sources that are required for building TF-M for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Running postbuild.sh script after TF-M builds is a command,
to be executed after build, not a post-build byproduct.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Upstream TF-M has modified the path name for ARM platforms,
so we fix the board names in the module integration code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a real board/SoC that supports power mgmt on the STM32 side to
get some additional coverage and hopefully catch any build issues
in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support for SDMMC in stm32h747i_disco.
This commit is tested with fat fs list file example in
samples/subsys/fs/fatfs.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
When downloading large files from the hawkbit server
the only time rsp->body_start is checked is on the
first call. After this it is never checked again.
This caused the wrong data to be written to flash
and a failed update.
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
Add ring_buf_size_get() to get the number of bytes currently available
in the ring buffer.
Add ring_buf_peek() to read data from the head of a ring buffer without
removal.
Fixes#37145
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Flush any pending Tx PDUs in the lower link layer before
enqueueing PHY_UPDATE_IND PDU with instant to ensure the
PDU is transmitted before the instant occurs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the advanced scheduling for Extended Initiator to
group central connections established to Extended
Advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Currently, in Zephyr the shell thread is the lowest priority i.e.
K_LOWEST_APPLICATION_THREAD_PRIO. Due to this all the other threads can
preempt the shell thread. Proposed solution is to add Kconfig which
gives the flexibility to change the priority of the shell thread.
This is now implemented using a new Kconfig variable
SHELL_THREAD_PRIORITY_OVERRIDE. By setting this option
SHELL_THREAD_PRIORITY can be set.
Signed-off-by: Uday Ammu <udaykiran@google.com>
Create version 2 of the MEC GPIO driver to support MEC172x to not
interfere with MEC152x. When the MEC172x ECIA interrupt aggregator
driver is ready, this driver will use ECIA for registering GPIO
interrupt callbacks instead of maintaining its own interrupt table.
Add V2 DT binding.
Add the Kconfig configuration settings for the MEC172x GPIO
V2 driver at the SoC and board level.
Add port id to DT allowing use of DT FOR EACH macro in the driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This driver supports the TI INA230 and INA231 Bidirectional Current
and Power Monitors. The devices work on the I2C interface and are
created from DT nodes with a compatible property matching "ti,ina23x".
The following datasheets were referenced while developing the driver:
https://www.ti.com/product/INA230https://www.ti.com/product/INA231
Twister passed:
twister -T tests/drivers/build_all/sensor/
Testing was performed on the stm32g071b_disco board with the following:
Load: ~170 ohms
Voltage: 5V
Measured Values:
Voltage: 5.1 V
Current: 0.032 A
Power: 0.157 W
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Moving the BIT macros from <sys/util.h> to <sys/util_macro.h>
allows the BIT macros to be used in device trees.
Testing: twister -T tests/drivers/build_all/sensor/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
This CL moves the phandles which don't contain 'reg' prop. from 'soc' to
'soc-if' node since they are the interface phandles only. It also
prevents "missing or empty reg/ranges property" warning messages.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
When integration mode is on, any skips on integration_platforms are
treated as errors. This patch adds an exemption for quarantined tests.
They will stay as skipped.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
LIS2DH12TR has an internal pull-up connected to SDA0 pin, while this pin
is connected directly to GND on PCB. This results in constant power
consumption, which can be prevented by disconnecting internal SDA0
pull-up. Do so by adding 'disconnect-sdo-sa0-pull-up' DT property, so
that accelerometer driver will send a proper command during boot.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Using GPIO_ACTIVE_HIGH explicitly says what is the active level of GPIO,
so prefer that instead of using 0.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use `dma_reload()` instead of `dma_config()` within DMA callbacks. This
significantly shortens time required to reconfigure DMA engine to
transmit / receive the next data block and allows to configure higher
I2S bus data rates.
The maximum I2S data rate supported by the driver is still lower than
that of underlying hardware. To fully support hardware capabilities the
I2S driver would have to use scatter-gather / linked-list DMA transfer.
This is currently not supported by the DMA driver.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update Microchip XEC RTOS timer driver adding MEC172x support and
using more device tree properities in the driver. We must also update
the XEC counter driver to use the new GIRQ DT properties.
Add new properties to RTOS timer and RTC timer YAML. These two timers
are linked due to option using a high speed timer for kernel busy wait.
Add Kconfig logic for XEC RTOS timer to MEC172x SoC.
Enable the Microchip XEC RTOS timer in the MEC172x evaluation board.
Add device tree nodes for most peripeherals.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Added tests for fully self-contained packages and use of
CBPRINTF_PACKAGE_ADD_STRING_IDXS flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test cases for cbprintf_fsc_package() and use of
CBPRINTF_PACKAGE_ADD_STRING_IDXS flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added support for conversion from a standard package which contains
pointers to read only strings to fully self-contained (fsc) package.
Fsc package contains all strings associated with the package thus
access to read only strings is not needed to format a string.
In order to allow conversion to fsc package, standard package must
contain locations of all string pointers within the package. Appending
that information is optional and is controlled by flags parameter
which was added to packaging API. If option flag is set then
package contains header, arguments, locations of read only strings and
transient strings (each prefixed with string argument location).
Package header has been extended with field which contains number of
read only string locations.
A function for conversion to fsc package has been added
(cbprintf_fsc_package()).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
add .S file extension suffix into CMAKE_ASM_SOURCE_FILE_EXTENSIONS,
because clang from OneApi can't recongnize them as asm files on
windows, then they won't be added into build system.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
The icx compiler of oneApi will invoke clang-cl on windows,
this is not supported in zephyr now, so change to use
clang directly.
And the clang from oneApi can't recognize those cross
compiling target variables of cmake, such as
CMAKE_C_COMPILER_TARGET, so used other cmake functions
to pass them to clang.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
This reverts commit 445a23a167.
This change was made with the incorrect assumption that using IBECC in
an ACRN VM is a valid use case. Turns out that ACRN will always manage
the IBECC access itself and the Zephyr driver is only useful for running
natively on the hardware.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In commit "pm: Fix weak linkage symbols" (PR #35274),
PM SoC hooks were converted to __weak to avoid clash with
new definition of these symbols in subsys/pm/power.c.
In this process, few SoCs were missed.
Fix this.
#37226
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The KBC/ACPI event data is 4-byte in width and composed of
event/data/type fields. However, the field position is defined by each
chip vendor via macro and not unified in the current implementation.
The commit uses the structure bit field to define and unify the field
position. It helps the application access it with a common approach.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Change DSA API to use `net_if` directly to make API calls instead of
indirectly via `dsa_context` and `switch_id`.
Remove unused `switch_id`, `switch_enable_port`, and `dsa_get_context`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Changed slave interface initialization code to be more generic and less
dependent on a specific number of ports.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Changed port numbers to start at zero since they're used as indexes
into various arrays in the code.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
it8xxx2 supports 'm', 'a', and 'c' extensions.
Enable them to save flash space and also improve
latency of fetching code from flash.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
In the eeprom read operation, when rambuf was available
mutex was not unlocked after the read. Consequence of that is
that device was blocked after that read for incoming operations.
This commit fixes the issue
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This CL replaces offset macros of pmc 'multi-registers' such as
PWDWN_CTLn with internal inline functions for better readability.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL replaces offset macros of scfg 'multi-registers' such as DEVALTn
and LV_GPIO_CTLn with internal inline functions for better readability.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Document that using west outside of a west workspace needs
ZEPHYR_BASE to be set. If this is not set, the instructions
on the "Application Development" page don't work.
Previously, "Getting Started Guide" and "Application Development"
pages told you to run `zephyr-env.sh/zephyr-env.cmd` which would
set ZEPHYR_BASE, but this was removed in Zephyr 2.3.0
Signed-off-by: Daniel Wong <drojfjord@gmail.com>
In the eeprom read operation, when rambuf was available
mutex was not unlocked after the read. Consequence of that is
that device was blocked after that read for incoming operations.
This commit fixes the issue
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add driver implementation and header files for a MEC172x
aggregated interrupt driver. Enable the parent(ECIA) node
to have the driver initialize interrupt hardware for use.
Enable child nodes for those GIRQs used for aggregation.
Refer to chip documention for the list of GIRQs restricted
to aggregation and those which support direct mode.
Add chip level device tree node for MEC172x EC interrupt
aggregator parent and GIRQ children. Each child node contains
a list of sources representing the source bit position in the
GIRQ registers.
Add DT bindings for ECIA and GIRQ nodes.
Add build file(s) and configuration items for the MEC172x ECIA
aggregated interrupt driver. Add and enable the MEC172x interrupt
driver on the MEC172x evaluation board(EVB). Enable parent node to
initialize ECIA hardware. Child nodes are left disabled until a
future driver needs them.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Check for the address family of the packet when setting the multicast
destination address used in the response. Current code checks either the
query type or the stack configuration, which can result in setting the
wrong type of address for the frame.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
In order to avoid to generate warning log message from
file system, first check if directory exists before trying to
create it.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
There are multiple reasons to want to find out if file or
directory exists, for example to create it. Stating and
finding out it doesn't exist should not cause an LOG_ERR call as
this gives information to the user in a normal call case.
Fixes#35718
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
To be consistent in how order header flags are handled when
updating the common header format fields, explicit check
for ADI flag in previous auxiliary PDU buffer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remember last used DID for each SID, so that DID value used,
when updating the advertising PDU fields, change between
consecutive changes to PDU fields.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make the Extended Advertising DID value updated to be unique
for every new advertising set created.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Verify that AD Data when switching to Legacy Directed, and
restore it when switching back to Legacy Non-Directed
Advertising mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix corrupt AD data used after directed advertising by
storing a backup of the AD data before switching to directed
advertising. Restore back the AD data with switching to non-
directed advertising.
The fix also addresses AD data backup when switching between
Legacy and Extended Advertising.
Fixes#18850.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to resolve AdvA in the received
AUX_CONNECT_RSP PDU before generating the connection
complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds support for SDMMC driver, Which
was missing. THi commit will solveserror SDMMC init
error on stm32l496g_disco boards.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
This commit adds support for SDMMC driver,
Which was missing. THi commit will solves
error SDMMC init error on STm32F746G_DISCO
boards.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
Add support for sam_e70_xplained, sam_v71_xult based on TC0 counter.
Note: TC module is a 16-bit counter. Even with slow, 32768 Hz input
clock the time span counted by the driver is short.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add basic counter driver based on Timer Counter (TC) module for Atmel
SAM family.
Remarks:
- The driver is not thread safe.
- The driver does not implement guard periods.
- The driver does not guarantee that short relative alarm will trigger
the interrupt immediately and not after the full cycle / counter
overflow.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Change naming of TC_CHANNEL to TcChannel in Tc struct to align with
a new convention used by samv71, samv71b series.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update to include the commits:
- patch: same70, samv71: Add TC waveform/capture mode registers
- patch: same70, same70b: Align naming of TcChannel in TC
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
According to the Reference Manual of several series(G0,L5,WL,WB,...)
RNG_DR register value should only be used if it is different from 0:
"Because when it is the case a seed error occurred between RNG_SR
polling and RND_DR output reading (rare event)."
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit introduces an automatic recovery procedure in cases an
entropy source error was detected.
- On Series with soft reset support a soft rest is executed.
- On Series w/o soft reset support the pipeline is cleared by reading
the RNG_DR 12 times.
With this changes the check for seed errors uses SEIS flag instead
of the SECS flag.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Define SoC hooks as weak symbols so this way applications can
overwritten them defining strong symbols.
The problem is that currently SoCs are defining these interfaces as
strong symbol inhibiting the possibility of applications bring their
own implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
SoC hooks are defined as weak functions for the case where they are
not implemented by a SoC. The problem that may happen is when an
application define it as weak as well. In this case, no compilation
error is issued but the version that will be used depends on the build
order. Just remove the weak placeholder implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This board has the capability to use SERCOM2 as an i2c
interface on pins 8 and 9.
This adds the neccessary pinmux settings and devicetree
node.
Tested with the i2c shell module.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
Interrupt polarity register don't support rising and
falling edge triggered at the same time, so I correct
logic operation to match this.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Correct SYS_CLOCK_HW_CYCLES_PER_SEC and
SYS_CLOCK_TICKS_PER_SEC to match our real setting value
for precise timing.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
When the Hardware Information Driver (HWINFO) provides a device ID
longer than the configured USB serial number, truncate the most
significant part instead of the least significant part. The lower part
is usually having more entropy, e.g. on STM32.
Fixes#34550
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add the missing includes to make the header more portable. It currently
requires other headers to be included before it.
Signed-off-by: Yuval Peress <peress@chromium.org>
SMP implementation across bt/udp does not check
if allocation of the buffer was successful.
If the buffer is not granted an error shall be
returned.
This patch fixes BUS FAULT issue when NULL
pointer is referenced.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit updates the supported features of stm32l5 and stm32wl boards
to match the devicetree configuration.
- add link to board defconfig and board.dts
- sort supported features table alphabethically by interface.
Additionally CRYP peripheral is added as supported feature to the
mikroe_mini_m4_for_stm32 board documentation.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The test sample.drivers.crypto.stm32 was built only for the stm32 crypto
driver (build_only: true).
This commit changes the configuration to run the test and adds regex for
the supported modes.
Additionally integration_platform native_posix is removed from the
crypto.stm32 test configuration, such that stm32 targets built in CI.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit uses filter instead of allow list for the
sample.drivers.crypto.stm32 test case.
As a result the ci test is not only built on mikroe_mini_m4_for_stm32,
but also on lora_e5_dev_board, nucleo_wl55jc and stm32l562e_dk.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds dt definitions for the hw aes accelerator
on stm32g0 Series.
The accelertor is available on the following socs:
stm32g041, stm32g061, stm32g081, and stm32g0c1.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds a dt node for the hw aes accelerator of the
stm32l5 series.
The stm32l562Xe.dtsi file now includes the newly created
stm32l562Xe.dtsi with the additional aes definitions instead of the
stm32l552Xe.dtsi file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds crypto support for several series which have
the same/very similar or same AES IP.
This includes G0, G4, L5, WL.
WB is also very similar but, expects the app to load the key via CKS.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds bindings for the STM32 AES accelerator.
Common properties of st,stm32-cryp are moved into
st,stm32-crypto-common.yaml.
The accelerator supports ECB, CBC, CTR, GCM, GMAC, and CCM
chaining modes.
128 bit bit data blocks with cipher key lengths of 128 and 256 bit are
supported.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Correct the wrong operand of clflush instruction. The old operand
points to a location inside stack and doesn't work. The new one
works well by taking linux kernel code as reference.
End address instead of size should get round up
Add Kconfig option to disable the usage of mfence intruction for
SoC that has clfulsh but no mfence supported.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
If BT_ISO is enabled we now compile conn.c which contains a
lot of functionality used by BT_ISO, even for broadcast-iso
builds, i.e. builds that do not require BT_CONN.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the guard such that the iso_mtu and iso_pkts are
not guarded by BT_CONN as they should be available for
iso broadcast-only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the bt_acl_recv function that works similar to
bt_iso_recv but for ACL data only, simplying the
generic bt_conn_recv function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_disconnect and conn_disconnect functions
to the ACL group.
Also adds a guard in the iso.c file for connected ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the notify_le_phy_updated, notify_le_data_len_updated,
notify_le_param_updated, notify_remote_info,
notify_disconnected and notify_connected functions
to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the deferred_work callback function to the ACL group.
This also moves the static function conn_lookup_iso
which is only called form deferred_work.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_lookup_state_le, bt_conn_lookup_addr_le and
bt_conn_is_peer_addr_le functions to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the bt_conn_get_tx_power_level and
bt_conn_le_get_tx_power_level functions to the ACL group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Start a group of functions guarded by CONFIG_BT_CONN
that are for connected-only functions. This is a
preparation step for allowing compilation and usage of
conn.c for ISO broadcast-only builds.
Moving all connected-only functionality into a single
group will also allow a possible move of all those
functions into an connected (ACL) only file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
z_smp_init() is only available if CONFIG_SMP is defined,
smp_timer_init() also depends on two Kconfig parameters. Also make it
conditional in cavs_timer.c. Also clarify some SMP-related comments
there.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
log_backend_std_put had its own implementation for getting standard
flags which was identical to the one in log_backend_std_get_flags().
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds temperature platform used by the IEEE 802.15.4 Radio
Driver. The new platform requires an enabled temperature sensor.
The new hal_nordic revision updates the nRF 802.15.4 component.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
In file crc16_sw.c essential type of LHS operand (16 bit) is wider than
essential type of composite expression in RHS operand (8 bit).
In crc32c_sw.c and crc32_sw.c Essential type of LHS operand (32 bit) is
wider than essential type of composite expression in RHS operand (8 bit)
Found as a coding guideline violation (MISRA R10.7) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Some recent updates to the bluetooth shell test cause build failures
in CI for platforms that don't have a uart that supports interrupts
(ie ip_k66f or xmc45_relax_kit).
As these tests are build-only a single platform is sufficient to get
coverage and utilize platform_allow to limit to just one board target
intead of integration_platforms. As this will limit to the single
platform for both PR based CI and nightly CI (integration_platforms
only is utilized for PR based CI, so we'd need other filtering for
the nightly CI and there isn't any value in building these tests
on more than the single platform so platform_allow makes the most
sense).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If "Cmake build failure" is detected test instance get status "error".
Despite this in final report this error is counted as failure. It can
be fix, by set proper results of each testcase in instance from None
to "BLOCK" after found Cmake error. After this fix, error is counted
properly in final report.
Fixes#37140
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
SRAM partitioning for non-secure should be done via a reserved-memory
node and not fixed-partitions. fixed-partitions is meant for flash
style devices.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The irq will be enabled at the condition of start or repeat
start of I2C. If timeout occurs without being wake up during
suspend(ex: interrupt is not fired), the irq should be
disabled immediately.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Includes a table to display compatibility between debug probes and host
tools.
Moves the J-Link External Debug Probe section up for consistency with
host tools listings and to clarify separation between sections.
Reformats Flash and debug with ST-Link section with tabs for different
host tool options for clarity and readability.
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Reformats the three sections on flash configuration for devices with
different bootloader compatibility into tabs to streamline instructions
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Change removes logs and assertions from default configuration.
They can be optionally enabled with debug_overlay.conf.
CONFIG_BT_BUF_CMD_TX_COUNT is increased to avoid dropping
HCI commands.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
This patch improves the general look and feel of the LaTeX (PDF)
documentation build. Changes include:
- A custom title with relevant information has been created
- Some colors have been adjusted to match those in the web template
- Charter font family is used
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The functions to check advertising and target address in a
PDU are used only inside the same file, hence make them file
static functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add target address check to extended scanning implementation
to detect invalid target address present in primary and
auxiliary channel PDU. Implementation is reuse of the check
used in the initiator after refactoring to pass parameter to
differentiate, its use for primary or auxiliary channel, and
for scanning or initiating.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit avoids enabling interrupts during Zephyr init.
Details:
Interrupts will be enabled only when the first thread starts or if
arch_irq_unlock() is called before that.
The logic is now:
1. Enable traps, disable interrupts globally
2. Initialize bss
3. Call _PrepC
Use in-place memset() to avoid register window overflow and underflow
traps. That is perhaps not the common scenario, but could happen with
memset() implementation which contains SAVE instructions on a system
with few register windows.
The second, and more important, item this commit addresses is that it
increases the processor interrupt level (priority) to highest. That
is, it enters _PrepC with all maskable interrupts levels disabled.
This fixes some cases where interrupts could be taken after
z_clock_driver_init() while the system was still initializing. That
seem to have occurred when clearing large thread stacks.
The third thing is that we now start out with current window pointer
0 (PSR.CWP=0) instead of 1. It has no practical implication except
for preparing for possible future support for systems with only
two windows.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds an example application for Sensirions SGP40 gas sensor
and SHT4X T/RH sensor.
The measured T/RH are used to make use of the on-chip T/RH compensation
of the SGP40.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
XCC's linker cannot properly process our linker script with
regard to cached/uncached memory regions as the linker cannot
correctly calculate addresses using boolean operations.
Fix this by doing address pointer arithmetic manually to
move between cached and uncached memory regions.
The addresses of symbols were compared via nm and they are
the same before and after this change.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC's own xt-objcopy does not recognize the "--dump-section"
command. So simply copy the objecy file into binary so it can
be included in the final bootloader binary.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC doesn't like that a for loop which declares the loop
variable inline. So extract the declaration of the loop
variable outside the for loop.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the inclusion of sys/util.h inside the #if block to
avoid this being included when going through XCC's assembler.
With the old behavior, a bunch of std*.h get pulled in resulted
in build failure as keywords such as "typedef" are not supposed
to be in assembly files according to XCC assembler.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC doesn't recognize GCC pragma to ignore -Warray-bounds. So #if
it out, or else XCC would complain about unknown option for all
syscall generated header files.
Fixes#36661
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The compiler option "-fdiagnostics-color=always" is not known to XCC
(which is based on really old GCC). So don't enable color
diagnostic output when building with XCC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The gperf generated data needs to be placed at the end of memory
to avoid pushing symbols around in memory, but data in .sdata section
aren't placed currently. Also renaming .sdata section to kobject_data.*
section and add it to kobject_data output section to fix issue.
Fixes#37023.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The stack array tstacks was declared in the header file using
the same macro which defines the same stack array but with
an added "extern" in front. This macro adds alignment and section
attribute which are actually not the same as the actual stack array
defined in main.c. The section name used in the section attribute
contains the file name where the stack array is defined or extern
declared. So the same symbol, in this case z_interrupt_stacks, has
different attributes in two places, and GCC 11 starts to complain
about this. So use the newly introduced macro to extern declare
the stack array without adding/replacing any symbol attributes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In test_kobject_release_null(), dummy is not initialized
before being fed to k_object_release(). So set it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Not all arch has native support for __builtin_popcount() on
hardware and GCC falls back in using software only implementation.
However, with GCC 11, this is no longer included automatically
and requires linking explicitly with libgcc.a. This is not
trivial as it requires changes some linker magic and a sizable
change to most linker scripts. So opt for an easy solution
by implementing our own popcount in the test.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The z_interrupt_stacks was declared extern in the kernel internal
header file using the same macro which defines the same stack
array but with an added "extern" in front. This macro adds
alignment and section attribute which are actually not the same
as the actual stack array defined in kernel/init.c. The section
name used in the section attribute contains the file name where
the stack array is defined or extern declared. So the same
symbol, in this case z_interrupt_stacks, has different
attributes in two places, and GCC 11 starts to complain about
this. So use the newly introduced macro to extern declare
the stack array without adding/replacing any symbol attributes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
A stack can already be declared extern via K_KERNEL_STACK_EXTERN().
This adds similar macros for stack arrays.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Moves Z_KERNEL_STACK_LEN() higher in the header file so it is
near the other stack size calculation macros. Also, it was
actually declared after it is first used in the header.
So this seems a logical move.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the type casting of the incoming addresses to
the bit ops from uint32_t* to uint8_t*. This avoids compilers
and static analyzers complaining about the incoming out of
bound access if incoming argument is an array smaller than
4 bytes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added bt_mesh_msg_send() which can be used by the application to
directly send model layer messages without local instantiation of
related models. Also added bt_mesh_msg_cb_set() which allows the
application to recieve mesh model layer messages without local
instantiation of related models.
Added bt_mesh_has_addr() which returns a bool. For unicast addresses,
this returns whether or not bt_mesh_elem_find() was successfull. If the
above mentioned bt_mesh_msg_cb_set() has been used by the application to
set a message callback, this returns true so that the stack attempts to
push every model message up to the application via the callback. If no
callback has been set, group addresses are searched to see if the stack
should pass the message up the stack to an instantiated model.
These changes allow applications that do not or can not instantiate
models to interface with models in a mesh network. This is applicable to
applications which act as a Bluetooth mesh gateway, sniffer, debugger,
network monitoring, non-mesh relay/extender, etc.
In app_keys.c friend.c net.c bt_mesh_elem_find() is used only to
determine the existance of an address. The full return value of
bt_mesh_elem_find() is unecessary and so was replaced by the above
mentioned bt_mesh_has_addr() function in these instances.
Simplified bt_mesh_elem_find() by removing the search through group
address. Since the above mentioned bt_mesh_has_addr() function handles
instances where group addresses must be searched, it was no longer
necessary to preform this search in this function.
Signed-off-by: Bud Wandinger <bud@budkoembedded.ca>
Add support for power management and the shutdown mode for bq274xx fuel
gauge sensor. This now allows boards that have any kind of low power
mode to turn on or off the sensor.
Tested on a Company's custom board with bq27421 sensor on it.
Signed-off-by: Luka Lopotar <luka.lopotar@greyp.com>
For setting the APP_KEY, "mib_req.Param.AppKey" field should be used.
Fix it!
Fixes: #36540
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The flag source_periph seems to be incorrectly set in dma_stm32.
In case the transfer direction is from periph to mem, then the
stream->source_periph is 1 (true) else it is false.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Based on the new bindings for the stm32 dma feature,
the overlay for enabling the dmamux on spi client is modified.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Based on the new bindings for the stm32 dma feature,
the overlay for enabling the dma on uart client is modified.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The stm32l47r soc has a dma of type dma-v2, so the cells have
only 3 elements,. This adpat for the quadspi periph.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
All the macro for dma-cells are now in the
include/drivers/dma/dma_stm32.h header file.
So the include/dt-bindings/dma/stm32_dma.h is no more
useful and removed from #include.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The macro to set the element of the dma-cells for each peripheral
are defined in the dma_stm32 header file
and used in the periph driver (as dma client)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Each stm32 dma can be of V1 or V2 or V2bis type. Each type
has a dma-cell with specific nb of element. The feature and slot
properties are not required depending on the stm32 family.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This will define a new bindings for any stm32 dma feature
Depending on the soc family, the DMA is of V1 or V2 or Vbis type
And give a factored definition for feature
The difference is on the dma-cell structure.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is the dma V2bis which is particular DMA V2 instance for
stm32F1 and STM32L1 soc series. This DMA does not use the dma slot
Otherwise it is similar to version V2.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This provides a command line interface to query and modify
bridge instances, similar to Linux's brctl utility.
It can be used to inspect an application's bridge usage,
or manage a bridge of its own in a generic way.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is accomplished with 3 fake ethernet interfaces hooked to a
common bridge, simulating incoming packets and controlling each
interface's transmission product.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds the ability to create Ethernet bridges for connecting
separate Ethernet segments together to appear as a single
Ethernet network.
This mimics the Linux functionality of the same name.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Implement a clock control driver for Microchip MEC172x handling
configuring the 32 KHz input sources for the PLL and peripheral-32k
clock domains. MEC172x differs from MEC152x. MEC152x had one 32K source
for both PLL and peripherals. MEC172x allows the two domains to use
independent 32 KHz sources. Device tree updated to provide addresses
of hardware used by the driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Some of the shell tests need a devicetree "fixed-partition" and
"storage_partition" for the settings partition support. Not all
boards support this, so filter the tests on the devicetree having
this.
Fixes#37115
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Logo was accidentally deleted as part of some docs cleanup. Add it back
with a new name making it more explicit that it belongs to the readme.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
cc13x2_cc26x2 had its own power policy that was implementing the same
logic available in the default residency policy. Also, this policy was
unnecessarily setting up a timeout to wakeup the system. This is not
necessary, the power subsystem takes care of this.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The exit latency for the standby state is available in
policy/policy_residency_cc13x2_cc26x2.c. Just copying it to the state
definition in dts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Option to have continous scanning simultaneously while
advertising and multiple peripheral role is active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Babblesim test of Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Application demonstrating Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added sample to demonstrate use of multiple identity and be
able to be connected to multiple times from same central
device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This action will run on each PR and will post a comment if footprint of
some reference applications has changed, initially as a FYI but later it
will be enforced when footprint for example is gone beyond a certain
threshold.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Very simple script to diff between two ram or rom reports generated by
size_report. When you call call the ram_report or rom_report targets you
end up with a json file in the build directory that can be used as input
for this script.
The output shows which symbols insreased and which decreased in size and
also tracked added/remove symbols as well.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prevent CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT when LOG_PRINTK.
Prevent use of assert in cbprintf header when printk is redirected
to logging. Enabling it would lead to circular header includes and
compilation failure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Assert header is including printk header and cbprintf header
may be included by printk.h when printk is redirected to logging v2.
That creates circular includes which must be prevented by
preventing using assertion and including assert header file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add auto-generated kconfig header to linker script pre-processing
via -imacros flag. This permits link scripts supplied via
zephyr_linker_sources() to use CONFIG_* variables.
Signed-off-by: David Palchak <palchak@google.com>
ZEPHYR_BASE and ZEPHYR_BUILD directories were passed to Sphinx via
environment variables. However, these paths can be easily discovered by
the conf.py file itself. As a result, Sphinx is less dependent on CMake
to operate.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the macro STM32_LSE_CLOCK is always defined and therefore systems
without lse crystals hang on startup.
Used #if instead of #ifdef.
Signed-off-by: Alexander Wachter <alexander.wachter@leica-geosystems.com>
This adds the config to PASS the tests/drivers/dac/dac_loopback
on the nucleo_f746zg board, when PA0 and PA4 are connected.
The DTS of the nucleo_f746zg defines the ADC1 ch0 and DAC1 ch1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the dts to PASS the tests/drivers/dac/dac_loopback
on the nucleo_f429zi board, when PA0 and PA4 are connected.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Reformatted "Configuring a Debug Probe" to display only one of the
options at a time to improve reading flow, and split paragraph
instructions into an easy to follow list with emphasized differences
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Reformatted "Configuring a Debug Probe" to display only one of the
debug probe options at a time to simplify text on screen when
following along
Signed-off-by: Julia Hathaway <julia.hathaway@nxp.com>
Implementation of hardware semaphore algorithm of STM32 AN5289
to enter and exit low power
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit introduce new HAL Telink module used by
new Telink B91 RISC-V platform drivers.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
The LaTeX build succeeds without the fix_tex.py script, so remove it.
The file actually mentions ".tex file produced by doxygen", so it may
not be relevant for Sphinx after all.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
add a test into latency_measure test case to measure
the average time for dynamic memory allocation and release.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
This commit enables ADC support for stm32l496g_disco
platform in device tree. VREF is configured to use
internal. Current VREF is 2.5V.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
Add MEC172x chip specific headers for Port 80h debug
capture, quad SPI, and VBAT registers. Update due to
merges.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Because we use the extended kconfig, we have already
supported relative paths, and it is clearer to use
relative paths in the bluetooth submodules.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
If bsim tests are built without errors then warnings are hidden.
A couple of them has sneaked in recent PRs.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Because these two functions are called from threads and ISR.
And they run a bit-wise OR operation on the interrupt registers.
So protect them to prevent race condition between thread and ISR
context where causing an interrupt won't enable as expected.
eg.
- Pseudo code of thread enable IER1's bit1:
1. load word from IER1 (0x40) and write into CPU register S1
=> S1=0x40
2. Or S1's bit1
=> S1=0x42
(But if an interrupt is triggered here)
3. Store word to IER1 from S1
=> IER1=0x42
(IER1 will be 0x42 not 0x43, IER1's bit0 is disable again due to the
race condition above)
-Pseudo code of ISR enable IER1's bit0
1. load word from IER1 (0x40) write into CPU register S2
=> S2=0x40
2. Or S2's bit0
=> S2=0x41
3. Store word to IER1 from S2
=> IER1=0x41
4. Go back to thread.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
So far the maximum configurable file size was limited to 16KB (2^14).
This might be enough for small partitions on internal flash. For
external QSPI memories however, this is certainly too restrictive.
Change maximum configurable file size to be 1GB, which is 2^30. Such
value will prevent signed integers overflow on 32-bit platforms, while
giving user full flexibility on how big log files should be.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Replace the dot diagram with its original source. This is possible
thanks to the Sphinx Graphviz extension. Note that some style attributes
have been removed as defaults are already provided by the extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable the built-in Sphinx Graphviz extension to allow creating Graphviz
diagrams natively on the source files. Some style defaults have been
enabled to make sure diagrams are consistent and have good quality in
both light and dark modes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
reuse the lpc's lpadc driver for rt1170, modify the dts and add
some macro to shield some code of LPC series. Also add the
board support inside the tests/drivers/adc/adc_api/src/test_adc.c,
and a dts node:zephyr,user inside
samples/drivers/adc/boards/mimxrt1170_evk_cm7.overlay
Signed-off-by: Crist Xu <crist.xu@nxp.com>
The global variables in the Minimal C library are now placed in
z_libc_partition, update the document accordingly.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Some Kconfig options are left marked as inline literals. But in
Zephyr document, we use the "kconfig" role provided by Sphinx.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Under the "OS Abstraction / POSIX Support" section in the "User and
Developer Guides", we somehow had rand() function already listed and
marked supported, but not srand(). Add srand() to the list.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
When MBEDTLS_RSA_C is defined, mbedtls define its local version of
rand() function. Since we already have rand() in our minimal libc, we
can safely remove this.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
rand() and srand() are pseudo-random number generator functions
defined in ISO C. This implementation uses the Linear Congruential
Generator (LCG) algorithm with the following parameters, which are the
same as used in GNU Libc "TYPE_0" algorithm.
Modulus 2^31
Multiplier 1103515245
Increment 12345
Output Bits 30..0
Note that the default algorithm used by GNU Libc is not TYPE_0, and
TYPE_0 should be selected first by an initstate() call as shown below.
All global variables in a C library must be routed to a memory
partition in order to be used by user-mode applications when
CONFIG_USERSPACE is enabled. Thus, srand_seed is marked as
such. z_libc_partition is originally used by the Newlib C library but
it's generic enough to be used by either the minimal libc or the
newlib.
All other functions in the Minimal C library, however, don't require
global variables/states. Unconditionally using z_libc_partition with
the minimal libc might be a problem for applications utilizing many
custom memory partitions on platforms with a limited number of MPU
regions (eg. Cortex M0/M3). This commit introduces a kconfig option
CONFIG_MINIMAL_LIBC_RAND so that applications can enable the
functions if needed. The option is disabled by default.
Because this commit _does_ implement rand() and srand(), our coding
guideline check on GitHub Action finds it as a violation.
Error: lib/libc/minimal/include/stdlib.h:45:WARNING: Violation to
rule 21.2 (Should not used a reserved identifier) - srand
But this is false positive.
The following is a simple test program for LCG with GNU Libc.
#include <stdio.h>
#include <stdlib.h>
int main()
{
static char state[8];
/* Switch GLIBC to use LCG/TYPE_0 generator type. */
initstate(0, state, sizeof(state));
srand(1); /* Or any other value. */
printf("%d\n", rand());
printf("%d\n", rand());
return 0;
}
See initstate(3p) for more detail about how to use LCG in GLIBC.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Add Microchip MEC172x header set 5 chip specific
peripheral headers. Update with recent merged code.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Zephyr Bluetooth Low Energy Controller for mesh stack
uses pre-emptible continuous scanning, allowing advertising
events to be transmitted without delay when advertising is
enabled. No need to compensate with scan window duration.
Zephyr Bluetooth Low Energy Controller built for nRF51x
SoCs use CONFIG_BT_CTLR_LOW_LAT=y, and continuous scanning
cannot be pre-empted, hence, scanning will block advertising
events from being transmitted. Increase the advertising
duration by the amount of scan window duration to compensate
for the blocked advertising events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Disable use of BT_CTLR_SCAN_UNRESERVED with BT_CTLR_LOW_LAT.
nRF51x SoC needs to block any CPU use inside radio events,
hence use of radio without time reservation is required for
proper functioning of Controller in nRF51x.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This converts register access from macro to functions.
This allows SoCs to override these functions if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the HPET timer to use kconfig to specify clock
frequency instead of relying on calculation at runtime.
When the frequency is known at build, this allow the toolchain
to optimize some calculations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames MIN_DELAY to HPET_CMP_MIN_DELAY, and also allows it
to be overridden. The default delay is for HPET with relative
high frequency, and may not suitable for all HPET
implementations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extracts the hard-coded value into a macro which can be
overridden. This is in preparation for SoCs where the period
is not in femptoseconds.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch adds a devicetree configuration example for the Everlight
B1414 LED controller.
An overlay for the nucleo_f070rb board is provided. It assumes that
a B1414 LED controller is connected to the PA7 pin (SPI 1 MOSI). The
WS2812 SPI driver is used.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch states that the Everlight B1414 LED controller is compatible
with the Worldsemi WS2812. Some information about it is added to the
WS2812 DT binding and driver Kconfig files.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Since this driver is working reliably, let's use k_usleep() instead of
k_busy_wait() (as suggested in a TODO comment) to latch and reset the
LED strip controller.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some devices compatibles with the WS2812 IC have a different reset/latch
delay.
This patch introduces the "reset-delay" optional property for the WS2812
DT binding and adds support to the ws2812_spi driver. This new property
allows to configure the reset/latch delay of a WS2812 compatible LED
strip controller from its DT node.
If omitted the driver uses 8 microseconds by default (which is good for
the WS2812 IC).
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some devices compatibles with the WS2812 IC have a different channel to
color mappings (e.g. RGB, BGR, RGBW, etc).
This patch introduces the "color-mapping" required property for the
WS2812 DT binding and adds support to the ws2812_gpio and ws2812_spi
drivers. This new property allows to configure the color to channel
mapping of a WS2812 compatible LED strip controller from its DT node.
Since this property also allows to know if a white channel is available,
then this patch removes the "has-white-channel" property.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
In case a non-readable resource gets updated (either by the server or
with an API), it makes no sense to send a notification in such case, as
no such resources are not included in notifications anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds length defines for all provisioning PDUs and uses them to split
prov_link.conf_inputs into separate fields.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Opened directory descriptor is leaked when returning 1. Fix that by
utilizing goto in function return path.
Fixes: 6b18e6992d ("subsys/loggin/log_backend_fs: added recovery after
file lost")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When DMA switches from one buffer to another ENDRX followed by
RXSTARTED is generated. Code flow assumes that ENDRX will be
handled before RXSTARTED but this may not be the case if there
is a short between ENDRX and RXSTARTED and event occurs after
ENDRX event check but before RXSTARTED event check. In that case,
RXSTARTED event is handled first. Such case may happen if there
is a higher priority interrupt that may preempt UARTE interrupt
handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a new property to the "nordic,nrf-clock" binding to allow
configuration of the HFCLKAUDIO frequency.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Consensus was reached to locate Microchip MEC172x header files
in the zephyr MEC172x SoC folders. These are the first set of
headers specific to MEC172x and common to the MEC family. Hardware
register structures will be located in peripheral specific headers.
Update based on latest merge of MEC172x related files.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add guards to the structs. This has two purposes:
1) Reduce size of only one of them are enabled
2) Fix a compile issue if only one of them were enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add guards to the structs. This has two purposes:
1) Reduce size of only one of them are enabled
2) Fix a compile issue if only one of them were enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a couple of compile tests for the bt shell for
BT audio, including checking that the services can be
compiled individually without error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If either AICS or VOCS clients were not enable, then the VCS
client could not be enabled as there was a compile error
in the function that registered callbacks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Even though it's highly unlikely that a component of time
would ever approach INT_MAX, use the unsigned specifier to mitigate
any unexpected behaviour.
Fixes#36814
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Follow-up: #16817, commit af968c2694
The referred commit introduced app.overlay as a general application
devicetree overlay if no specific board overlay is found.
This commit document this behavior in the devicetree howto.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Refactors the mcux lpc driver to use DT_INST_FOREACH_STATUS_OKAY instead
of hardcoding each instance. Tested with samples/basic/button and
samples/basic/blinky on mimxrt685_evk_cm33.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The parser module name collides with builtin parser module in python.
This seems to break the import in windows.
Signed-off-by: Elliot Revell-Nash <elliot.revell-nash@wdtl.com>
Added minimal device tree and board files to build Microchip
MEC172x. SOC layer stripped down to allow build for checking
compilation only.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Move @MulinChao, @WealianLiao, and myself from code owners entry
dts/arm/nuvoton/npcx to dts/arm/nuvoton.
So we will be chosen as reviewers automatically when dtsi files under
dts/arm/nuvoton are touched.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
In certain build cases we get the following compiler warning:
i2c_rcar.c: In function 'i2c_rcar_transfer_msg':
i2c_rcar.c:168:6: warning: 'ret' may be used uninitialized in
this function [-Wmaybe-uninitialized]
Fix this by initializing ret to 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make this test part of drivers rather than have it be board specific
with the hope that we can add more tests and configurations supported in
the future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sensor_value_to_double should never alter the given value of val.
Therefore adding a const qualifier makes sense.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
Flag that indicates if a given packet is being retransmitted has become
obsolete since more detailed flags were added. This commit removes the
flag and references to it altogether.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit aligns the nRF5 ieee802154 driver with the latest
API changes necessary to handle security-related flags properly.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit updates hal_nordic revision to bring the latest changes in
the nRF IEEE 802.15.4 radio driver.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit extends the struct net_pkt structure to contain flags
related to IEEE 802.15.4 security processing. Added flags:
* ieee802154_frame_secured - indicates if a frame is authenticated and
encrypted according to the configuration stored in Auxiliary Security
Header
* ieee802154_mac_hdr_rdy - indicates if MAC header is ready to be
transmitted or if it requires further modifications
These flags can be used by the upper layer to correctly configure
retransmissions of frames.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Fix HCI Reset Command from asserting when there is pending
connection creation requested on coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a define for invalid Extended Advertising SID value of
255 required when generating legacy advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing initialization of legacy advertising PDU length
when advertising sets are reused between extended and legacy
advertising modes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use CONFIG_BT_CTLR_BROADCAST_ISO when CONFIG_BT_CTLR_ADV_ISO
or CONFIG_BT_CTLR_SYNC_ISO Kconfig option is supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added Bluetooth Specification references to the
implementation of Channel Selection algorithm #2 in the
Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the functions required to calculate the SubEvent 1
and SubEvent n mapped channel indices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the check for mixed use of Legacy vs Extended HCI
commands for Periodic Advertising related HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix extended advertising report to set the directed bit in
the event type when receiving directed non-connectable
advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix extended advertising PDUs seen after the advertising
duration has elapsed, by considering the events skipped
due to overlap with other events which is provided by
the ticker lazy parameter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks for invalid PHYs supplied to HCI LE Extended Scan
Parameters and LE Extended Create Connection commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Newline character is automatically appended in log backends such as
UART, so there is no need to add it explicitly.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is '%u' and '%d' in format message, while there is only one
argument (besides format string). Remove ununsed '%u' to stop printing
garbage.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
FS backend is no different when it comes to producing human readable
timestamp. Allow to select it when FS is the only enabled logging
backend.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
RTC interrupt was reading CC value and passing it to the handler.
However, higher priority interrupt could preempt RTC interrupt
and set new CC value. In that case CC value read in the RTC
interrupt context was not the one that triggered the interrupt.
Added fallback to COUNTER value if that case is detected.
Using COUNTER is not as precise as CC because it returns time
when event was handled and not when event occured but it is the
only option since CC value is overwritten.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The len argument always has the same value as
usb_dev.setup.wLength, which is also the last received
USB device request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
After extracting from ull_adv_sync_pdu_set_clear functions:
ull_adv_sync_pdu_alloc, ull_adv_sync_extra_data_set_clear
Use of ull_adv_ext_hrd_data structure became unnecessary.
The extra_data member of the structure was never used
due to separate function responsible for setting extra_data
content.
In all cases content for extended advertising header fields
may be passed to the ull_adv_sync_pdu_set_clear directly
as void * pointer, instead of pointer to ull_adv_ext_hdr_data.
This simplifies use of ull_adv_sync_pdu_set_clear as well
as removes unneccesary code to handle special structure type.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
extra_data is not used by ll_big_create and ll_big_terminate.
extra_data_prev and extra_data_new are optional arguments for
ull_adv_sync_pdu_alloc.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
ull_adv_sync_pdu_alloc function was extracted from ull_adv_sync_pdu_-
-set_clear function. The arguments list of ull_adv_sync_pdu_alloc
was derived from source function but the acutal functionality is
only part of what it was before.
The ull_adv_sync_pdu_alloc does not change extended advertising
PDU header fileds. The hdr_add_fields and hdr_rem_fields arguments
were used to allocate or not allocate memory for extra_data related
with new periodic advertising PDU. Also hrd_data pointer was
not used by the function.
The function arguments list was simplified.
New enum ull_adv_pdu_extra_data_flag was introduced to provide
named flags for extra_data memory management.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Mark the Controller Area Network (CAN) driver API as unstable. The CAN
API was introduced in Zephyr v1.14 and has since gained support for many
different hardware platforms.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Pin PB5 is part of ARM Cortex-M debug interface and by default
configured to output TDO/TRACESWO signal. Disable TDO/TRACESWO
function on PB5 pin when LOG_BACKEND_SWO is not enabled. This
ultimately frees the pin to be used by standard SoC peripherals.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Fix `poll()` handling for DTLS clients when the underlying socket is an
offloaded socket. As in this case no `k_poll()` is used underneath, it's
not possible to monitor the handhshake status with `tls_established`
semaphore. Instead, do the following:
1. If no handhshake is in progress yet, just drop the incoming data -
it's the client who should initiate the handshake, any data incoming
before that should not be processed.
2. If handshake is currently in progress, lift the `POLLIN` flag and add
small delay to allow the other thread to proceed with the handshake.
3. Otherwise, just proceed as usual.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TLS/DTLS handshake in most cases is a blocking process, therefore
the underlying socket should be in a blocking mode to prevent busy
looping in the handshake thread. Fix this by clearing the O_NONBLOCK
flag on the underlying socket before the handshake, and restoring it
afterards.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes#36667
If you had a single log file with index 0 created and you reboot
the log backend wasn't counting it and was overwiting it.
If you filled that file up before rebooting then it worked as
expected, creating a new file at the next index on each boot.
Signed-off-by: Elliot Revell-Nash <elliot.revell-nash@wdtl.com>
Demonstating usage of IPC Service. Multi-instance RPMsg
was ued as a backed for IPC Service.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
Implementation of the backend for IPC Service.
Multi-instance RPMsg was used as a backend.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
IPC Service allow plugging in different transport backends.
Specifies a generic API that is implemented by the backend.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
This patch implements a service that adds multiple instances
capabilities to RPMsg.
Each instance is allocated a separate piece of shared memory.
Multiple instances provide independent message processing.
Each instance has its own work_q.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
The zephyr sam gmac driver don't get register address and, in some
cases, peripheral id from devicetree. This replace headers constants
in favor of devicetree values.
This fix wrong Atmel SAME7x/SAMV7x gmac register address and add
missing peripheral id property for SAM family.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current GMAC compatible not allow especialize properties by SoC
family. Split current generic Atmel GMAC compatible into two new
compatibles which are defined by SoC families. This increase the
freedom and avoid odd situations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This fixes properties documentation and two devicetree styles:
- properties with wrong code identation and
- property description tag style
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
A syscon device is a device managing a memory region containing a set of
registers that are not cohesive enough to represent as any specific type
of device. We need a driver for that because several other drivers could
use the same region at the same time and we need to io-map the region at
boot for MMU enabled platforms.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The location of the documentation guide is inconsistent with other
documentation guides, so move it to the `guides` folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
libc optimization changes regarding memset and memcpy
added by this 5d55730cf6
caused wifi driver issues, which won't
let device get IP address.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit includes the following:
1. Add symbol for choice option. So we can override the default value
by an earlier definition.
2. NPCX9 doesn't support 33MHz SPI clock in the header. So disable the
option for NPCX9.
3. NPCX9 support 512K flash. Change default to 512k for NPCX9.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Make the imxrt6xx drivers consistent with the other SoC family drivers
by building them in the nxp hal library. Similar to commit
cf0587c3ec, this stops leaking long source
paths in build directories and makes them deterministic.
When building samples/hello_world for mimxrt685_evk_cm33, this changes
the build directories from:
build/
└── zephyr
└── CMakeFiles
└── zephyr.dir
└── home
└── maureen
└── zephyrproject
└── modules
└── hal
└── nxp
└── mcux
└── drivers
└── imxrt6xx
├── fsl_cache.c.obj
├── fsl_common.c.obj
├── fsl_flexcomm.c.obj
├── fsl_gpio.c.obj
├── fsl_inputmux.c.obj
├── fsl_ostimer.c.obj
├── fsl_pint.c.obj
└── fsl_usart.c.obj
to:
build/
└── modules
└── nxp
└── lib..__modules__hal__nxp.a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add a small paragraph about Floating Point services
in Cortex-M, focusing on the important considerations
around footprint and runtime overhead.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section about specific considerations
around chain loadable images.
Add a brief section about code relocation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Memory protection features in Cortex-M applications
- user mode and system calls
- MPU based stack overflow detection
Add section about memory map and mpu programming.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
- add a paragraph about CMSIS
- add a note about maintenance status of Cortex-M
- add a paragraph about testing the Cortex-m porting
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add list of the available QEMU targets for Cortex-M
platforms in Zephyr along with the corresponding feature set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding sections to describe
- isr handling principles
- different kinds of interrupts
- reserved interrupts and levels
- locking and unlocking interrupts
- zero latency interrupts
- dynamic direct interrupts
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding a small paragraph to describe the details around
thread stack alignment. Adding a detailed section to cover
the thread context-switch and the stack limit checking.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM Cortex-M user guide. Initial commit including a table
for listing supported features in the different
Cortex-M variants.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The gen_devicetree_rest.py script is responsible for generating .rst
files that comprise the devicetree bindings index. As a first step, it
finds all the YAML files that might be bindings.
However, it's doing that incorrectly and ignoring files in nested
subdirectories. This affects bindings in places like
dts/bindings/net/wireless, which are not found.
Fix it by using recursive=True in the glob.glob() call.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Test fails consistently in CI but local builds succeed. Puzzling. In
order to keep main green, disabling this test only for qemu_riscv32
until a solution is found.
```
% west build -p always -b qemu_riscv32 -t run \
tests/kernel/mem_protect/stack_random
...
*** Booting Zephyr OS build zephyr-v2.6.0-1039-g523764b3fd75 ***
Running test suite stack_pointer_randomness
===================================================================
START - test_stack_pt_randomization
Test Stack pointer randomization
stack pointer changed 13 times out of 64 tests
PASS - test_stack_pt_randomization in 0.5 seconds
===================================================================
Test suite stack_pointer_randomness succeeded
===================================================================
PROJECT EXECUTION SUCCESSFUL
```
```
*** Booting Zephyr OS build zephyr-v2.6.0-1063-g0106d8f2a391 ***
Running test suite stack_pointer_randomness
===================================================================
START - test_stack_pt_randomization
Test Stack pointer randomization
stack pointer changed 0 times out of 64 tests
Assertion failed at WEST_TOPDIR/zephyr/tests/kernel/mem_protect/\
stack_random/src/main.c:68: test_stack_pt_randomization: \
(sp_changed equal to 0)
Stack pointer is not randomized
FAIL - test_stack_pt_randomization in 0.6 seconds
===================================================================
Test suite stack_pointer_randomness failed.
===================================================================
PROJECT EXECUTION FAILED
```
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Assuming gpio devices are required by pinmux which is used
by any device make it a device that is initialized in preliminary
steps of platform init.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move GPIO devices clock handling in stm32_pin_configure function
which is also used in stm32_setup_pins.
Additionally, add device usability check to be sure gpio driver
was initialized before being used by pinmux pseudo driver.
Last, going from the assumption that GPIO devices should be
initialized before being used by pinmux, then there is no need
to enable clock in case CONFIG_PM_DEVICE_RUNTIME=n.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
So far only upstream boards were listed. Use just introduced
zephyr_module.parse_modules() function to get information about
out-of-tree board roots. Append them to user provided args.board_roots,
so out-of-tree boards from west modules are listed as well.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add parse_modules() function, which will offload most of the work in
main() and additionally allow external Python code to use that function.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Refactor Periodic Advertising time update function to use
caller supplied Periodic Advertising PDU to calculate the
time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Apply suggestions from code review, and change to using
BT_HCI_ERR_SUCCESS instead of returning 0.
Co-authored-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended and Periodic Coded PHY time reservation. The
define earlier used does not have calculations for Coded
PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to update Periodic Advertising time
reservations when advertising data and/or CTE length is
updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check for already enabled and started Periodic
Advertising when HCI LE Set Periodic Advertising Parameters
command is called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out Periodic Advertising time calculations so that
it can be reused when PDU length is updated as part of
advertising data updates.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to update Extended Advertising time
reservations when advertising and scan response data are
updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Export the function calculating the primary channel
advertising event time reservation, so that Extended
Advertising implementation can reuse it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out Extended Advertising time calculations so that
it can be reused when PDU length is updated as part of
advertising data and scan response data updates.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to update legacy advertising time
reservations when advertising and scan response data are
updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out advertising time calculations so that it can be
reused when PDU length is updated as part of advertising
data and scan response data updates.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use a conservative turnaround time of 150us covering slower
nRF51 and faster nRF52 CPU that influence the turnaround
timing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add nucleo_wl55jc to platform_allow for lora send/receive and class_a
samples. The board has a variation of the sx1262 driver, this should
allow to build test that code path.
Fix the existing config as well to specify the platforms on a single
line, as currently only the last entry is considered.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Define the subghz radio node in the module dtsi file, with the internal
RF switch connection and TCXO setting, and point at it from the
corresponding dev board file.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add a device node for the subghz radio in stm32wl.dtsi. The radio is
present in all chips of the series, so having the node there with the
common properties simplifies the board dts files.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add support for the STM32WL integrated radio, based on the sx1262. The
STM32WL implementation does not use any GPIO, and the signals are routed
to other units of the SoC and accessed with the ST HAL.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Convert the standalone part of the sx126x driver to the new gpio_dt_spec
APIs. This allows moving the specific GPIOs in that part of the driver
and out of struct sx126x_data.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This adds support for controlling the SUBGHZSPI NSS line in STM32WL
devices. This is a special dedicated SPI port only connected to the
radio device internally, chip select happens through a bit in the PWR
module. Adding a special dt-property to identify the port, it all gets
built out on non-WL devices.
Deduplicate the existing dts bindings in the process, and add the new
one for the special spi with the new property.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add a dts node for st,stm32wl-subghz-radio. The device is integrated in
STM32WL series SoCs, and based on the sx1262, but it does not use any
gpio as all the necessary signals are internally connected to various
SoC units.
To account for that, make the redundant gpio optional in the template
files, but mark them as required in the sx1261 and sx1262 definitions,
to match with what's used in the driver.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Current impĺementation fails due to missing stop bit
when reading data. This fixes it and refactor the implementation
by adding k_busy_wait when waiting I2C bus completion.
Also, this implementation is based on esp-idf v3.0.
It will be refactored based on latest esp-idf v4.3 using proper
low level calls.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#34015
The STMPE1600 is an I2C based GPIO expander. This initial patch
only supports reading from/writing to the pins on the STMPE1600,
and there is currently no support for interrupts.
Signed-off-by: Titouan Christophe <moiandme@gmail.com>
Introduce a set of header files to be able to define and declare
sections and regions in the linker script. Introduce also DT helpers to
retrieve data back.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
To be able to get a tokenize DT string without the quotes. Deprecate
also DT_ENUM_TOKEN and DT_ENUM_UPPER_TOKEN.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This reverts commit 9e58a1e475.
This change is in conflict with commit 94f7ed356f ("drivers: serial:
add a dummy driver for vnd,serial"). As a result two equal serial
devices are defines, resulting in link error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Fix a couple of issues related to Power Management:
1. A build error because 'dev' was used even if not declared
in the caller routine scope
2. The lis2mdl power management init specific routine was
not declared in in the device instance definition
Signed-off-by: Armando Visconti <armando.visconti@st.com>
So far modem API used UART device names / labels. Change API to operate
on device pointers instead, so that we stop using device_get_binding()
in modem core and in some DT compatible modem drivers.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Serial device is needed for building drivers that use DEVICE_DT_GET().
None of the currently used modem drivers use that right now, but this is
about to change.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add DEVICE_DT_GET_ONE() macro. This macro is similar to
DEVICE_DT_GET_ANY() but instead of returning NULL if no enabled,
compatible device instance is found, it throws a compilation error.
This is useful for compile-time checks in samples.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Bluetooth 5.3 specification was recently released, and
has a new version identifier (12) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a link to best practices about copyright notices and when to and
when not to change them or add them.
Fixes#6777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the content in the default index is HTML only, so create an
index just for PDF and keep it clean.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the symbol name on top and in the page title. This will enhance
search results and adds a missing page header that is needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Right now the kconfig index is randomly placed in the guides. This is a
table similar to other indeces we have and should be considered as part
of an appendix rather than place it in the middle of the documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When stopping the interface, also abort the RX routine and enable RF
power saving. Will re-start RX on iface start.
Also fixed a bug with `cmd_fs` crashing at RF wakeup because `rf_mode`
was allocated on stack.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
This is useful if the user wants to set specific latexmk options, e.g.
-quiet for CI.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Sphinx automatically generates a Makefile/make.bat that allows to build
the LaTeX output. This converts the CMake `pdf` target into a shim to
this Makefile, making the solution more future-proof if Sphinx decides
to change something.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The extension was not evaluating the GENERATE_HTML option correctly. The
get_doxygen_option returns a `List[str]`, not a `str`.
This effectively means that the Zephyr apidoc has not been updated for a
while as the extension was not moving the output to the final
destination folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
CRC16 was removed by simply decreasing length of the last fragment by 2.
This worked as long as last fragment was longer than 1 byte. If not,
then last fragment was corrupted (its length ended up being 65535),
leading to undefined behavior.
Fix CRC16 removal by utilizing recently introduced
net_pkt_remove_tail(), that properly handles multiple fragments.
Reported-by: Jim Paris <jim@jim.sh>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Introduce a helper function for being able to remove any arbitrary
length from tail of packet. This is handy in cases when removing
unneeded data, like CRC once it was verified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
If a write offset isn't a multiple of the nor page size, and the
length is too large to fit within a single page, it could wrap around
in that page.
Tested on i.MX RT1064 internal flash using NVS settings
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit enables true rng for nucleo_f207zg platform. This has been
tested with tests/drivers/entropy/api and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
replace custom crc8 with sys/crc8
use sys_put/sys_get helpers for byteorder specific operations
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add driver for sensirion consumer humidity sensor line.
Supports shtc1 and shtc3, but only shtc3 is tested.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Instead of waiting forever for the SPI transfer to complete, let's use
a timeout value and bail out if elapsed. The timeout value logic is,
xfer_len/frequency + tolerance
Tolerance value can be modified using a Kconfig symbol,
CONFIG_SPI_COMPLETION_TIMEOUT_TOLERANCE. It defaults to 200ms.
Fixes: #33192
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There was an issue with wrong length of CTE send in connectionless
mode, with periodic advertising PDUs. Radio peripheral was not
configured to send CTE with correct length while PDU had CTEInfo
field informing receiver that CTE is attached to the PDU.
Source of the problem was in ll_df_set_cl_cte_tx_enable function.
Order of parameters in ull_adv_sync_pdu_alloc was wrong.
ULL_ADV_PDU_HDR_FIELD_CTE_INFO was speficed as hdr_rem_fields.
Because of that extra_data, memory used to provide CTE configuration
to LLL, was not allocated. PDU content is prepared in ULL, so CTEInfo
field included correct information, while Radio was never configured
by LLL to send CTE.
ull_adv_sync_extra_data_set_clear received a pointer to hdr_data,
instead of a direct pointer to df_cfg structure. When extra_data
was allocated correclty, wrong CTE configuration was provided
copied there and LLL received invalid CTE length. It was different
than the length in PDUs CTEInfo field.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Default Voltage scaling range selection (range2)
doesn't allow to configure Max frequency
switch to range1 to match any frequency
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Default Voltage scaling range selection (range2)
doesn't allow to configure Max frequency
switch to range1 to match any frequency
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Fix macro used in g4 file to enable LSE clock.
Then, to avoid no-op configurations, generate an error
when MSI Hardware auto calibration is selected but LSE
clock is not enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This PR addresses radio signal stength measurement during
and before PPP session. The PR provides provides facility
of readout for both +CSQ and +CESQ versions depending
upon the modems. This PR follows the idea of rssi readout
of PR#35496. Additionally, reliable Cell info update
is also ensured.
Signed-off-by: Tahir Akram <mtahirbutt@hotmail.com>
Add I2C bus initial support to Renesas R-Car SoC series.
Both I2C2 & I2C4 buses are supported on R-Car H3 board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This patch add support for I2C on the Renesas R-Car.
This I2C hardware block can be found on various Renesas R-Car
SoC series.
It allows to perfom read and write on I2C buses in an
interrupt based way on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Third generation R-Car series products have up to
seven I2C bus interfaces conformant with the
Philips Semiconductors (now NXP Semiconductors) I2C bus
(Inter-IC bus) specification.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
As a first step towards being more forgiving on invalid inputs, allow
string-valued aliases properties that do not point to valid nodes when
the user requests permissiveness.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modeled after dtc's --force option, the idea is this will try harder
and harder over time to produce an object despite malformed input.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
`_FOREACH_` macros do not allow the caller to pass additional arguments
to the `fn`. A series of `_VARGS` variants have been added that allow
the caller to pass arbitrary number of arguments to the `fn`:
```
DT_FOREACH_CHILD_VARGS
DT_FOREACH_CHILD_STATUS_OKAY_VARGS
DT_FOREACH_PROP_ELEM_VARGS
DT_INST_FOREACH_CHILD_VARGS
DT_INST_FOREACH_STATUS_OKAY_VARGS
DT_INST_FOREACH_PROP_ELEM_VARGS
```
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Add power management support (runtime-idle and suspend-to-idle)
support for the NXP Kinetis KE1xf SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Enable the NXP Kinetis Low Power Timer (LPTMR) OS timer driver when
power management is enabled as the Arm SysTick timer cannot wake up the
KE1xF from deep sleep.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add NXP Kinetis Low Power Timer (LPTMR) OS timer driver shim. Since the
LPTMR does not support asynchronous changes to the timer period, only
non-tickless mode is supported.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Keep the Slow Internal Reference Clock (SIRC) running in low-power
mode.
This allows peripherals that needs to remain operative in low-power
mode to use the SIRC as clock source.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Do not enable the Arm SysTick driver by default. Instead, rely on the
default Kconfig settings for the Arm SysTick driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Determine the default CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC from devicetree
when using the Arm SysTick hardware timer.
When the NXP KE1xF SoC series is using the Arm SysTick as hardware
timer, the cycles/second will always be equal to the CPU core clock
frequency.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The config/data casts are not strictly necessary. Furthermore, config
was being casted to non-const.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use the recently introduced struct gpio_dt_spec to store GPIO
information and operate with them.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds a devicetree chosen node to the mimxrt1170_evk_cm7 board to link
Segger RTT and SystemView sections in DTCM by default. Enables the AHB
clock while the CM7 is sleeping to allow debug access to the TCM.
Note that automatic RTT control block detection may not search the DTCM
address region, therefore you may need to manually set the RTT control
block address or search range in the Segger host tools (SystemView or
RTT Viewer). For example,
$ JLinkRTTViewer -ra 0x20000000
Tested with:
- samples/subsys/shell/shell_module/
- samples/subsys/tracing/
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
`OT_LOG_LEVEL_NONE` has some uses within OpenThread but it is not
hanled in the Zephyr's platform implementation. This commit makes
use of those logs as `LOG_LEVEL_ERR` level.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
By default the hifive1 board doesn't enable the SPI controller that
the flash is on. As such this test will not build on that platform
due to lack of a missing SPI bus controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable serial driver such that sensors commuicating via uart
can be added to this test(using the vnd,serial driver).
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds a serial dummy driver compatible to vnd,serial.
This is needed that devices can access the uart device in tests
like tests/drivers/build_all/... .
Add myself as codeowner to avoid complicance check failure.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Indicate which files have to be cleaned for each target. This feature is
only supported for CMake >= 3.15 and is ignored on older CMake versions.
Build will still succeed, but the `clean` target will not clean the
additional build files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify the devicetree generation. Most of the extra options are not
used, so they have been removed to make things easier to maintain.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor the Kconfig target. Mostly formatting in this case. The Kconfig
script is also added as a dependency of the CMake configuration step, so
that if it is changed, the Kconfig generation step will be re-run.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor the pdf build targets. The Sphinx latex build is now invoked by
the 'latex' target. The 'pdf' target can be used to build the resulting
LaTeX files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor HTML targets. The 'html' target is kept as is, 'sphinx-html'
equivalent is now 'html-nodeps'.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Group dependencies all together. Some have been simplified, e.g. Sphinx
and others improved, e.g. LaTeX.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
west is currently optional, however, when not found its docs will not be
available and the zephyr_module CMake utility will not be able to find
modules (unless ZEPHYR_MODULES is used). Other Python dependencies, i.e.
the ones listed in the requirements file, are not checked, so do the
same for west.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We excluded the beaglev_starlight_jh7100 from this test but only did
the kernel.device.pm test. We should have excluded the platform
from both tests.
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test ocassionally fails on the mps2_an385 platform in the CI, due
to strict timing requirements of the test.
Relax the timeouts and acceptable fuzz time a bit, to prevent the
failures in the future.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use GPIO output high and low to simulate I2C start and stop
conditions to restore i2c to normal.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Create the pinmux phandle to the I2C driver node in the
devicetree. When the pinmux_pin_set function in
i2c_it8xxx2_init can refer to the setting of this phandle.
It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The SoC driver name is 'USB High-Speed Interface (USBHS)'. This rename
from usb_dc_sam to usb_dc_sam_usbhs allowing add others SoC drivers
like 'USB Device Port (UDP)' that is found at SAM4S/E variations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Give the choice a name so that the soc/board developers can change the
default selection in their Kconfig.*.
For example:
choice CACHE_TYPE
default HAS_EXTERNAL_CACHE
endchoice
There was a similar issue had beed discussed:
https://github.com/zephyrproject-rtos/zephyr/issues/6948
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I07c3e78a5243b30912f8e44fa3181fa163016318
The `pdftex` utility that is used for PDF documentation generation does
not support GIF images.
This fix replaces the animated `ReelBoard-Blinky.gif` with an animated
PNG (APNG) image `ReelBoard-Blinky.png`.
Note that APNGs are backwards compatible with "normal" PNGs. Modern
web browsers will display APNGs in the same way as animated GIFs, while
any application that can read PNG files can read APNG files
successfully.
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
Adds a BabbleSim test for provisioning multiple devices in a row. This
scenario had a regression in #33782, which is fixed in #35405.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
QUIET flag is now overriden according to the `doxyrunner_silent`
configuration value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change will process Doxygen output and will map it to the Sphinx
logger. Things like errors and warnings will be mapped to actual Sphinx
logger error and warnings. In practice this means that when Doxygen
throws a warning and Sphinx is run in "-W" (warning as error) mode, the
build will fail. It also has some other advantages such as the
possibility of filtering issues using the warnings_filter extension.
It is also expected that CI errors not being displayed issue is fixed
with this change.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
add min_ram to some test applications
as we found below platforms have size issues
TWR_KE18F and FRDM_KL25Z
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Some commands shell not be present when shell is not acting as
a log backend. Use of them lead to crash in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit changes the entry referencing the hal_stm32 module
into west.yml. This brings the fixes to build issues when stm32
asserts are enabled.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add single-register MMIO GPIO driver for complex cases where
only several fields in register belong to GPIO lines and each GPIO
line owns a field with different length and on/off value.
Such CREG GPIOs are used in Synopsys em_starterkit and HSDK boards.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This commit add the support of "Interrupt driven UART"
to the R-Car UART driver and enable it in the related
Kconfig.
The driver is supporting nearly all the methods that are
described in the "Interrupt driven UART" part of the
uart_driver_api.
This new version of the driver has been tested on
H3ULCB board by running "uart_basic_api" test suite.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This commit enables entropy support for nucleo_wl55jc.
Additionally it sets the PLL Q divider to 2, which was not set in
the board dts before.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds the dt node for rng to the stm32wl series
and sets it as chosen zephyr,entropy source.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds support for stm32g0 socs with integrated rng and hw aes
acceleratior, which are stm32g041, stm32g061, stm32g081, and stm32g0c1.
It also adds the definitions for the rng peripheral
and sets it as chosen zephyr,entropy source.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds entropy support for stm32wl and stm32g0.
Pll is used as clock source and has to be enabled,
other clock sources are not supported at the moment.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds support for the seeed studio LoRa-E5 Dev board,
which is powered by a module based on stm32wle5jc soc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds the dts definitons for the seeed lora-e5 module.
Additionally I add myself as codeowner for the new dts/arm/seeed
directory.
This module packages a stm32wle5jc Sub-GHz Wireless Soc,
together with a 32MHz TCXO, a 32.768KHz crystal oscillator, and
power and RF circuitry.
With the introduction of lora support definitions for the radio
will be added in a future commit.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
To support single core stm32wlex series, cpu2 prescaler is set
only on dual core soc variants.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds support for stm32wle4xx, stm32wle5xx single core socs,
as well as stm32wl54 dual core soc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds dt support for stm32wle4, and stm32wle5 single core,
as well as stm32wl54 dual core socs.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback used by the device runtime PM can be easily replaced by a
simple state set after calling the state set/get calls. Broadcast logic
is simplified too, leading to the same previous behavior.
Since this is the only place where this callback was used, it can now be
removed from all devices and so pm_control callback signature
simplified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The bootloader itself contains the i.MX RT6xx boot header, so we don't
need to duplicate it when building chainloaded applications.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt685_evk device tree
to support mcuboot on the external octal SPI flash. This flash is rated
for 100K minimum program-erase cycles per sector, therefore this
partition configuration supports approximately 100K / (24576/8128) =
33073 upgrades.
Tested with samples/subsys/mgmt/mcumgr/smp_svr. The image swap takes
about a minute and a half to complete.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the i.MX RT600 SoC series to be more consistent with the i.MX
RT10xx SoC series by choosing a child node (external flash device) of
the FlexSPI bus for zephyr,flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
With this patch, zephyr can enable SMP directly. Otherwise
zephyr needs TB-R to provide psci function.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Armv8-A and Armv8-R both support PSCI. So PM_CPU_OPS_PSCI's
dependency should be "ARM64" rather than "ARMV8-A".
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add strong definition z_arm64_el2_plat_init() and it is controlled
by CONFIG_SOC_FVP_AEMV8R_EL2_INIT.
VMPIDR_EL2 must be set manually on EL2. The purpose of VMPIDR_EL2 is
that holds the value of the Virtualization Multiprocessor ID and This
is the value returned by EL1 reads of MPIDR_EL1
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add psci and more cpu nodes into fvp_baser_aemv8r.dts. The purpose
of it is perparing to support SMP.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
The nrf9160dk_nrf9160_ns and nrf5340dk_nrf5340_cpuapp_ns don't have
enough space for debug builds as configured so excluded them from
this specific test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit adds support for Zephyr basic mgmt group to mcumgr.
The first command added to the group is storage erase command.
Authored-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Tests check transmission, receiving beacons in situations
of IV update (with test mode on) and key refresh procedures.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
When zsock_close() is called, socket is freed before the mutex for the
socket is unlocked. If the freed socket is given to another thread
immediately, the mutex for the socket will be initialized by the new
socket owner, while the mutex is still locked by the thread calling
zosck_close().
Fixes#36568
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
When tcp_send_data() is called to resend data, but there is no data
to resend, zero length packet is allocated and NULL net_buf is passed
to net_buf_frag_insert() in which assertion fails.
Fixes#36578
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
Add some more example to the description of zephyr_library_amend().
This should help users to get input of the extra possibilities that this
function provides.
See: #35770
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On the native_posix board global object constructors
are run by the underlying OS runtime init prior to
Zephyr kernel init. Thus Zephyr should not run global
object constructors a second time. Doing so breaks
application behavior that relies on global
constructors doing work that must be done only once.
See bug #36858 for more information.
Signed-off-by: David Palchak <palchak@google.com>
Avoid some cases of running out of disk space in the daily build. Add
setting -M option to remove artifacts as we build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is a name clash when using G4 series LL TIM driver depending on
the inclusion order of the LL TIM and pinmux headers. If the LL headers
are included after pinmux is included, AF1 and AF2 definitions used by
pinmux clash with the AF1 and AF2 TIMx register names.
In order to solve this problem with minimum impact, the following has
been done:
1. Prefix the AFx and ANALOG definitions with STM32
2. In order to avoid changing all *-pinctrl.dtsi files, the STM32_PINMUX
macro contatenates STM32_ with the provided mode.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Updates CXX support documentation to reflect exception support
added in fixes for #32448 and #35772.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This commit adds a new Kconfig option CLOCK_CONTROL_NPCX_EXTERNAL_SRC.
With this option enabled, the internal 32.768 KHz clock (LFCLK) is
generated by the on-chip Crystal Oscillator (XTOSC). Otherwise, the
LFCLK is generated by the Low-Frequency Clock Generator (LFCG).
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
NPCX power.c use LOG_MODULE_DECLARE(soc), but NPCX chip doesn't
register soc log module. This CL register soc log in soc.c to fix NPCX
build error for power management & log system.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Fix Periodic Synchronization setup when handling invalid
number of channel count in Periodic Advertising's Sync Info
structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This property has been marked as deprecated in 2.5.0 and was not
actually used for even longer time.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use macros to access SCA and Channel Map fields in the Sync
Info structure in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ISO test to demonstrate ACAD field in periodic
advertising PDUs. Here, test changing the periodic
advertising data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Based on review comments, refactor out sync_info population
to be performed by the caller of the function that prepares
the extended advertising PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the set/clear function to modify the common extended
header format in the PDU to add/remove ACAD.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to add/remove ACAD field in the common
extended header format of the periodic advertising PDU on
create/terminate BIG.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add CMake warning message when building experimental
features like Advertising Extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
refactor flash_page_get_info to simplify and to avoid using mixing the
usage of an off_t (offs) and an uint32_t (page_index).
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
adv_sync_hdr_set_clear was just wrapped by ull_adv_sync_pdu_set_clear
so we can merge both into single function.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds simple helper to update CTEInfo. It assumes proper periodic
adv PDU as input to simplify code.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds some initial support to update AD in chain. We still only
support placing AD in 1st PDU, but this will properly copy any linked
PDUs that may be added due to e.g. CTEInfo present.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds adv_sync_pdu_init helper which initializes pdu_adv buffer
with contents of AUX_SYNC_IND/AUX_CHAIN_IND PDU. Extended header flags
can be specified to reserve required space for corresponding fields if
necessary.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This enables chaining ota for periodic advertising. AUX_CHAIN_IND PDUs
will be sent automatically if AuxPtr is detected in preceding PDU.
AuxPtr offset is always set to achieve minimal required frame spacing,
i.e. 300us (T_mafs). AuxPtr in all PDUs in advertising train are
updated on enqueue since PDU spacing is already known at that time so
we do not need to waste time in LLL.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds support to allow advertising PDUs to be linked which is
required to send advertising trains, i.e. AUX_CHAIN_IND.
PDUs are linked with a simple single-linked list, the pointer to next
PDU is stored at the very end of PDU buffer. This prevents it from
being overwritten if PDU is modified and allows for build time offset
calculation.
There are few helpers added to make handling easier, e.g.:
- get next linked PDU
- get last linked PDU
- link one PDU to another
- link PDU at the end
- release all linked PDUs (except for 1st)
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This function is the same as lll_adv_pdu_alloc except it also allocates
extra data at the end - it can just use lll_adv_pdu_alloc call to avoid
extensive c&p.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds helper to always allocate advertising PDU either from memory
pool or pdu_free queue and does not reuse existing PDU in adv_pdu.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Advertising channel packets do not have MIC, there's no need to have
extra parameter which always has to be set to 0 anyway.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This commit updates the NS board variant from
`nrf9160dk_nrf9160ns` to `nrf9160dk_nrf9160_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit updates the NS board variant from
`nrf5340dk_nrf5340_cpuappns` to `nrf5340dk_nrf5340_cpuapp_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from
`v2m_musca_s1_nonsecure` to `v2m_musca_s1_ns` to maintain
consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from
`v2m_musca_b1_nonsecure` to `v2m_musca_b1_ns` to maintain
consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from `mps2_an521_nonsecure`
to `mps2_an521_ns` to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from `bl5340_dvk_cpuappns`
to `bl5340_dvk_cpuapp_ns` to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit configures usart3 to use dma in uart_async_api test
on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures usart3 to use dma in uart_async_api test
on stm32l562e_dk platform. Short pin2(PC10) & pin 3 (PC11) of usart3
in CN4 connector on stm32l562e_dk platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures spi, dma & dmamux to run spi_loopback test
on nucleo_l552ze_q platform. The tx & rx pin of spi1 should be
shorted before running spi_loopback.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures DMA to run tests/drivers/dma/loop_transfer
test on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the DMA to run
tests/drivers/dma/chan_blen_transfer test on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the required DMA parameters to run
tests/drivers/dma/loop_transfer test on stm32l562e_dk platform.
This has been tested and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the required DMA parameters to run
tests/drivers/dma/chan_blen_transfer test on stm32l562e_dk platform.
This has been tested and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
In stm32l5xx soc, the LL_DMA_InitTypeDef has 2 more fields
(DoubleBufferMode and TargetMemInDoubleBufferMode) that must be
initialised with 0 else the configuration is wrong and gives
wrong values to the LL_DMA_Init function. Due to this the test
tests/drivers/dma/loop_transfer too would fail.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables spi1 in dtsi and updates the
documentation for nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables usart3 channel on nucleo_l552ze_q platform.
This would also be used to test usart in dma mode with
tests/drivers/uart/uart_async_api.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables usart3 channel on stm32l562e_dk platform.
This would also be used to test usart in dma mode with
tests/drivers/uart/uart_async_api.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds dma1, dma2, dmamux support in dtsi for stm32l5
series. This commit also fixes a compilation warning due to the
usage of upper case in "reg = <0x4000F400 0x400>".
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
-Hcl option instructs linker to use MetaWare C Compactlib.
According to MWDT documentation "Compactlib is not thread-safe"
So, let's use MetaWare C library instead which is thread-safe.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
We previously removed the iso data path when the iso channel
disconnected. Since the iso data path is unique for a given
iso channel (by handle), it does not make sense to remove
it for a disconnected channel, as the channel is, in
a sense, not existing anymore.
This update is to better comply with the bluetooth
core spec, and to avoid getting errors from the
controller on disconnect.
Rather than removing the implementation of being able
to remove the data path, the function was made non-static
and moved to the internal header file, in case we ever
want to use it. This should not affect compile size.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the function from scan.c to hci_core.c.
When in scan.c, the function is only available if
CONFIG_BT_OBSERVER was enabled. Since the function
can be used in other scenarioes where we need to parse
LTV data, it has been moved to a more generic place.
hci_core.c might not be the ideal place, but it is
where most other common bluetooth functions
are located.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert CoAP unit tests to ztest API.
Additionally, replace dynamic memory allocation with a static one, to
prevent memory leaks with ztest.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When compiling existing libraries that are difficult to change, these
headers simplify the library's integration. This specifically was the
agreed upon fix for trying to compile Android's CHRE as a subsystem.
Making changes to the Android repo to use the C style includes would be
very difficult and would likely take a very long time.
Signed-off-by: Yuval Peress <peress@chromium.org>
Fix some leftovers from the pm_device_state changes.
Fixes build problem introduced in
cc2f0e9c08.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This change ensures the CPU won't get an interrupt number which is
being generated.
it8xxx2 has a limitation for interrupt vector register.
CPU may read incorrect interrupt number in ISR.
The following is an example that got incorrect interrupt number:
1. Register IVECT = 0x10. (no interrupt pending/IVECT_OFFSET_WITH_IRQ)
2. Chip INT6 interrupt occurs (IVECT = 0x16) and jump to ISR.
3. Read interrupt vector register to determine interrupt number.
4. Higher priority interrupt occurs (for example: INT158, IVECT = 0xAE)
while the CPU is reading the interrupt vector register for EC INT6,
CPU may end up with an incorrect interrupt number between 0x16 and 0xAE.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Save ra to caller saved register is wrong because it might get
overwritten after another function is called, so we fix this.
Remove clear mip register operation. (it8xxx2 supports machine-mode
only, and MEIP bit of mip is read-only).
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
__LL_RCC_CALC_HCLK1_FREQ is only available for WL and WB series,
for other series __LL_RCC_CALC_HCLK_FREQ should be used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The nRF QSPI has a configurable delay from the rising
clock signal to the actual sample point measured in
clock cycles. This commit exposes that delay as a DTS
parameter without modifying existing behavior.
Signed-off-by: Abram Early <abram.early@gmail.com>
The definition of qspi_flash_get_parameters, that implements
the mandatory get_parameters API call for the driver, was incorrectly
placed within block conditionally compiled when
CONFIG_FLASH_PAGE_LAYOUT is defined.
The commit fixes the issue that was causing compilation error
when the config has not been set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This reverts commit a6a7a0d888.
Both application and network core define the same pins for uart0.
The pins should not be used simultaneously by both cores.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
add devicetree node for usart4 and usart5. usart4 and 5
shares the same interrupt line (14), hence both can't be enabled
at the same time.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
The Bluetooth proxy feature includes proxy client and proxy server.
In addition to the proxy pdu message used above, pb-gatt also uses
the same proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service and
Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename CONFIG_BT_MESH_PROXY to CONFIG_BT_MESH_GATT.
Create an additional promptless entry CONFIG_BT_MESH_GATT_SERVER
that selects CONFIG_BT_MESH_GATT and is selected by
CONFIG_BT_MESH_GATT_PROXY or CONFIG_BT_MESH_PB_GATT.
Create additional CONFIG_BT_MESH_PROXY used to represent
proxy feature (also include proxy client).
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The Bluetooth proxy feature includes proxy client
and proxy server. In addition to the proxy pdu
message used above, pb-gatt also uses the same
proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service and
Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename CONFIG_BT_MESH_PROXY to CONFIG_BT_MESH_GATT.
Create an additional promptless entry CONFIG_BT_MESH_GATT_SERVER
that selects CONFIG_BT_MESH_GATT and is selected by
CONFIG_BT_MESH_GATT_PROXY or CONFIG_BT_MESH_PB_GATT.
Create additional CONFIG_BT_MESH_PROXY used to represent
proxy feature (also include proxy client).
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The Bluetooth proxy feature includes proxy client
and proxy server. In addition to the proxy pdu
message used above, pb-gatt also uses the same
proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service
and Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename `CONFIG_BT_MESH_PROXY` to `CONFIG_BT_MESH_GATT`.
Create an additional promptless entry
`CONFIG_BT_MESH_GATT_SERVER` that selects
`CONFIG_BT_MESH_GATT` and is selected by
`CONFIG_BT_MESH_GATT_PROXY` or `CONFIG_BT_MESH_PB_GATT`.
Create additional `CONFIG_BT_MESH_PROXY` used to represent
proxy feature (also include proxy client).
see #36343
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This commit fixes the button activity notification not working issue.
The right attribute(4) is used for the button service.
This has been tested on nucleo_wb55rg and disco_l475_iot1 platforms.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit selects LL_RCC_RNG_CLKSOURCE_CLK48 as a clock source
to rng peripheral. LL_RCC_RNG_CLKSOURCE_CLK48 is CLK48 divided by 3.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
6lowpan module can swap the original buffer with a newly allocated one
during decompression in case the decompressed header would not fit into
the original buffer. Therefore, storing the LL address offset and
restoring the pointer after decompression as it is done today is not
correct, as the new packet with decompressed IPv6 header will not
contain the LL header.
As the 6lowpan module doesn't deallocate the original buffer and
doesn't overwrite the LL header, its fine to use the original
pointers as they are.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Include the TI HDC2010, HDC2021, HDC2022 and HDC2080 temperature and
humidity sensors in the build_all test, to test the TI_HDC20XX driver.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add basic support for TI HDC20XX series (e.g. HDC2010, HDC2021, HDC2022,
HDC2080). It is able to get temperature and humidity in the default
14-bit resolution. Triggers, resolution selection, interrupt line, auto
measurement mode are currently not supported.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Activate optimizations for stm32h735g_disco which in the end
optimize the calls to ferror and fileno away.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The type used by device PM state was not changed to the recently
introduced enum type. The state is also initialized to a value distinct
from the first expected value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Kconfig option for indicating that a given SoC contains the NXP
Kinetis Reset Control Module (RCM).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Thos tests/samples are used to build any PR onl all available boards to
verify basic sanity. Having the kernel tag means they can get excluded
for random non-kernel changes causing regressions. so remove kernel tag
to keep them in all CI runs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
uart0 is used as default console output in Zephyr. Change prevents
assertion fail in default configuration of hci_rpmsg sample. The
failing assertion is related to enabling logger without backend.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
If the test is run in a board that has a network interface
enabled, then the tests might select and use wrong network interface
that is needed for the test. So this commit makes sure that
we always use the simulated network interface for the
Ethernet management tests.
Fixes#36419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
All variables for address, width and value are unsigned, so use strtoul
instead of strtol. This fixes an issue when 0xffffffff is about to be
assigned to specific address, which was truncated to 0x7fffffff so far.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Nuvoton provides different series MCU. The NPCX series has a specific
id, which can identify the real chip part number. This CL adds soc id
for the NPCX series.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
The _PrepC() function is the standard risc-v way
of zephyr entry point, so let it call the z_cstart instead
of calling this function directly.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
replaces the plain memcpy to zero the bss with
the standard zephyr function that does this task.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
by adding the soc specific files such: soc initialization code,
linker scripts and support for esp32c3 devkitm
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
hal_espressif repository was updated from esp-idf v4.2
to esp-idf v4.3 to allow latest Espressif chips integration.
As a consequence, it added a few changes in drivers
and peripherals. To maintain bisectability, changes in this
PR cannot be split. Here are some details:
wifi: update linker script by adding libphy and new attributes.
spi: update some APIs and fixed missing wait_idle check
west.yml: esp32: update hal to new version
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Configures Segger RTT and SystemView data linker sections to DTCM by
default on i.MX RT SoCs if there is a zephyr,dtcm chosen node in
devicetree. This fixes a build warning in
samples/subsys/shell/shell_module for the mimxrt1170_evk_cm7 and
mimxrt1170_evk_cm4 platforms, which don't currently have a zephyr,dtcm
chosen node.
Note that there are runtime issues with Segger RTT and SystemView on
this board that need further debug, but submitting this patch now to
address nightly CI failures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This fixes missing PPP iterable and adds all
common-rom.ld iterables.
ESP32 and esptool does not support more then 16 segments, which
blocks including common iterables section as is.
This partially reverts commit ad0bf94f77
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This adds a new Z_LINK_ITERABLE_ALIGNED option that includes
alignment.
Main reason is to avoid repeting ALIGN() calls for every
iterable needed on ESP32 linker script.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Use the actual minimum timeout used by the sample for task watchdog
channels (100 ms) as the configuration value for the fallback hardware
watchdog, to avoid unnecessary executions of the timer handler.
Add missing indentation in the documentation of the sample so that
the console output is rendered correctly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Do not use periodic executions of the timer handler, as in certain
circumstances (the fallback hardware watchdog used, one or more
task_wdt channel activated but none of them being ever fed) this
would lead to no callback/reset being executed for any channel.
Instead, schedule the next timeout from the timer handler function
when the function is executed for the dummy background channel or
for a channel that was deleted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of manually computing payload offset, let the CoAP library do
the work, and use the payload pointer returned by the
`coap_packet_get_payload()` function instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function did not work correct for packets generated with Zephyr
APIs, as `max_len` holds the entire buffer size, not the actual packet
size.
Additionally, unify how Payload Marker is handled in the calculation -
currently the coap parsing function adds it to the `opt_len` field,
which is counter-intuitive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is important that offset is set in the same manner, regardless of the
origin packet - it should indicate the final packet length in both
cases, when the packet is generated on the Zephyr side with CoAP APIs,
and when it's parsed from the UDP datagram. This allows for functions
like `coap_packet_get_payload()` to work correcty in both cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If stream socket is marked as pending close, make sure that send()
caller gets notified about it, so that application layer can decide to
stop trying to send anything more.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far send errors were silently ignored. This is okay for
UDP (datagram) sockets, as there is no guarantee that packets will
actually be sent successfully. In case of TCP (stream) stream sockets
however, application layer expects network stack to send requested data
as stream, without losing any part of it.
In case of send errors on stream sockets mark that socket to be closed
and stop sending any subsequent network packets, so that data stream
won't have any holes.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fix for Issue#35658.
Update the custom vector table to add the OS Event timer
interrupt which is used on RT685 as the kernel system timer
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
If you try to unlock an unlocked mutex, it will incorrectly
succeeds and decreases the lock count to -1.
Fixes#36572
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
This commit removes the huge if condition section and is
replaced with DT APIs to get the maximum erase time of a
stm32 flash from dtsi.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds max-erase-time element which holds the
maximum erase time of a sector or page or half-page for
all the series of stm32.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit defines max-erase-time element inside flash-controller
to be part of device tree.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Use defines for offset unit and for calculation of Periodic
Advertising window widening using clock accuracy value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix clock accuracy value used in the calculation of window
widening applied when scanning for auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Commit c045cbd336 added support for internal voltage reference source,
but in practice only the temp sensor is supported. Fix that.
Also change the code to keep the existing paths so that VREFINT and
TEMPSENSOR can be used at the same time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix i2c emulated bus initialisation code to use children of specific i2c
bus DTS node instead of first i2c bus instance.
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
Accumulator registers (ACCL, ACCH) are used on HS CPUs not only
in case of FPU usage but also in case of MPY usage. We enable MPY
for all ARCv2 HS in commit
18a24c3f6 ARC: gcc-m-cpu: use -mcpu=archs as a default for ARCv2 HS
but we didn't enable accumulator registers management.
Let's enable accumulator registers save/restore on all ARCv2 HS CPUs
by default.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ARConnect Inter-core Debug Unit (ICD) provides additional
debug assist features in multi-core scenarios. It's useful to halt
other cores when one core is halted.
Before we program ICD in master core(core 0) initial stage, add
all cores to mask. so we need to make sure other slave cores have
launched and in running mode before we enable ICD in master core.
If we launch master core first, then launch slave cores by master
core conditionally, in this scenario, it's not OK.
Let's update arc connect debug (ARConnect ICD) select mask
when new slave core come online by slave core self, instead of
use hardcoded select mask.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The patch fixes driver compile errors and ADC management for the f3x
series. It was developed and tested for the stm32f373 variant.
Tested-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
This adds power management support for the STM32WL series.
Suspend-to-idle is mapped to the three stop states (wake up from any
EXTI, including LPTIM), and soft-off can trigger either standby or
shutdown (wake up in reset).
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add the lptim1 device node definition and enable the corresponding
exti interrupt in sys_clock_driver_init().
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The current implementations of memcpy and memset are optimized for
performance and use a word based loop before the byte based loop.
Add a config option that skips the word based loop. This saves 120
bytes on the Cortex-M0+ which is worthwhile on small apps like a
bootloader.
Enable by default if SIZE_OPTIMIZATIONS is set.
Signed-off-by: Michael Hope <mlhx@google.com>
Move configuration related with BLE controller into board specific file.
That is required to allow building the sample for nRF5340 where BLE
controller is not part of the sample image.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Added a configuration of characteristic access permissions for
Bluetooth Heart Rate service.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This is a simple comments fix. This sample code is for the
"Health Thermometer Service", but at one location the comments read
"Heart Rate Service".
The change replaces "Heart Rate" with "Health Thermometer".
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
Move shared resources from m0 to common. This enable shared hardware
definition between the two cpu cores.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Rename `write_signal` to `readable` and `read_signal` to `writeable`
which are more meaningful to the actual states they represent, and make
the code analysis easier.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case read or write were called before the actual poll() call, the
poll() function was not signalled correctly about such events, which in
order could lead to a deadlock if the poll() was called with infinite
timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add unit tests which verifies that poll() function is signalled
correctly if called after data was written/read to/from a socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the ability to perform a write on the object name GATT
Characteristic with a notification callback to the application
that the name has been written.
In order for this operation to work the memory backing the
object name must be modifiable. To prevent forcing the user
to always allocate 120 bytes for the name, the maximum name
length is changed from a define to a configuration parameter.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
In case of non-recoverable errors (e.g. the connection breaks while
transmitting), the l2cap_chan_tx_process deques the net_buf but does
not unreference it. As this is inside a work queue thread, the sending
thread gets no information on this error, relying on the tx_process to
ultimately free the buffer.
Signed-off-by: Patrick Rathje <git@patrickrathje.de>
Converts the spi_nor flash driver to use `spi_dt_spec` as a
demonstration of the simplifications that the API enables.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add helper functions to simplify the usage of `struct spi_dt_spec`.
Implements helpers for the standard synchronous calls (transceive, read,
write).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Introduces the `struct spi_dt_spec` type, which contains the complete
SPI bus information derived from devicetree. It serves the same purpose
as `struct gpio_dt_spec` in that it can be constructed automatically in
`DEVICE_DT_INST_DEFINE` macros and provided as a single handle to SPI
API calls. Includes a single function, `spi_is_ready` that validates all
SPI bus dependencies are ready.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Replace device_get_binding() with DEVICE_DT_GET to obtain the PS/2
controller and clock control device objects. It helps to improve the
efficiency for driver initialization as DEVICE_DT_GET is processed
at the link time rather than run time.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The PS/2 module in npcx provides a hardware accelerator mechanism
including an 8-bit shift register, a state machine, and control logic
that handle both the incoming and outgoing data. The hardware
accelerator mechanism is shared by 4 PS/2 channels. To support it,
this CL separates the PS/2 driver into channel and controller drivers.
The controller driver is in charge of the PS/2 transaction. The channel
driver is in charge of the connection between the Zehpyr PS/2 API
interface and controller driver.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Added api call that can set a callback that is called whenever
data is received on shell. When callback is set, shell processing
is bypassed and data is passed to that callback.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit changes the entry referencing the hal_stm32 module
into west.yml. This brings in the asserts feature from stm32cube
hal/ll and zephyr.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds the asserts symbol in Kconfig to enable/disable
asserts functionality for stm32 series. These would be used in
stm32cube hal & ll drivers.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Promote the "edac mem" shell subcommand to a generic "devmem" root shell
command. This command is useful for poking around registers and memory
outside of the EDAC drivers.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit configures DAC sample application using overlay to
build and run on nucleo_l552ze_q platform.
This has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures DAC sample application using overlay to
build and run on stm32l562e_dk platform.
This has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Fix an auxiliary scan context leak when initiator
establishes a connection while there is another pending
auxliary PDU scheduled to be received. In this case, the
pending auxliary scan LLL context does an early abort
without generating a scan aux done event. Missing scan aux
done event caused the auxiliary scan context leak.
Fixes#36131.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit fixes an issue where bt_mesh_reset() call just erases all
mesh flags set at the initialization instead of restoring them and
thus disabling some features until the board reboot.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Network test cases are designed for emulated
environments so add platform_allowed filter to
only allow qemu platforms.
Fixes: #36418
Signed-off-by: David Leach <david.leach@nxp.com>
This will fix a bug caused by creating a multi instance resource with
only a single resource. Previously this was treated as a single instance
resource. This is now properly treated as a multi instance resource with
one instance
Signed-off-by: Markus Rekdal <markus.rekdal@nordicsemi.no>
rv32m1_vega don't boot due to device init ordering and changes with the
device model. The soc code is looking for a device pointer for the
intmux. Change to using DEVICE_DT_GET here as that will ensure we get
a valid pointer and by the time we need to utilize the pointer the
intmux driver will have been initialized and thus the device pointer
will be ready.
Also set BUILD_OUTPUT_HEX since we utilize openocd to flash and west
flash is looking for a hex file for openocd targets.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a work in progress initial submission for the
Microchip MEC172x family SoC. This submission does
not contain all header files or power management.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The ARConnect Inter-core Debug Unit (ICD) provides
additional debug assist features in multi-core scenarios.
In master core(core 0) initial stage, we will program ICD to halt
all other cores based on a halt occurring in one ore more core.
And all cores are in halt mode on reset, so we need to make
sure other slave cores have launched and in running mode
before we enable ICD in master core.
Currently we launch master first, Let's reverse the launch
order, launch master last, to make sure slave cores have
launched before we program and enable ICD.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Rename the top-level header file from <canbus/canopen.h> to
<canopennode.h>.
Rename CANopenNode related Kconfig options from CONFIG_CANOPEN* to
CONFIG_CANOPENNODE*.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the Zephyr-specific interface and support code for CANopenNode into
the modules directory. Consolidate the CMakeLists.txt files into one.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Minor update to calls to get Tx chain delay in extended
advertising and scanning to use S8 encoding delays.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We need to take RX chain delay and PHY used to receive
CONNECT_IND into account when calculating 1st connection
event offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the Tx to Rx switch, fix the delay which should be the
Rx ready delay plus the Tx chain delay and plus 4 us active
clock jitter compensation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor cleanup of the implementation of mutual exclusion
of LE Connection Parameter Request amongst active
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a sample that demonstrates how to transfer a periodic
advertising sync from a device to another device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a sample of using (in this case subscribing) to periodic
advertising sync transfer (PAST).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Using helper functions decreases function complexity numbers reported
by static code analyzers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Check errors returned by edac_ecc_error_log_clear() and
edac_parity_error_log_clear().
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use only boolean in if conditions as new coding style implies for edac
API header file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove #ifdefs making code cleaner and including error injection API
functions to documentation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor EDAC API making it more clear, removing unneeded typedefs and
using check for optional and assert for mandatory APIs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The beaglev_starlight_jh7100 uses a full 64-bit devicetree map
which uses #{address/size}-cells = 2. The device test expects
that #{address/size}-cells = 1 so exclude beaglev_starlight_jh7100
from the test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Order the subsystems in the manifest file alphabetically, as they
actually should be according to the comment within the manifest file.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
In drivers/sensor/CMakeLists.txt, we have various lines like this:
add_subdirectory_ifdef(CONFIG_FOO foo)
Then drivers/sensor/foo/CMakeLists.txt says:
zephyr_library()
zephyr_library_sources_ifdef(CONFIG_FOO foo.c)
This is redundant; the foo/CMakeLists.txt won't be added to the build
system unless CONFIG_FOO=y in the first place, so there's no need for
extra boilerplate testing it again.
Remove all these unnecessary instances in each sensor driver's
CMakeLists.txt using this pattern:
zephyr_library()
zephyr_library_sources(foo.c)
In a couple of places, the '.c' extension is missing. Add them in for
consistency when that happens.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The eager_only is currently breaking the usage of the `.. only``
directive, so remove it. Documentation seems to build fine without it,
so it has been removed for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Bluetooth Mesh Vendor model hava company id field.
Accordin MeshPRFV1.0.1 3.7.3.1 Operation codes.
The 3-octet opcodes are used for manufacturer-specific opcodes.
The company identifiers are 16-bit values defined by the
Bluetooth SIG and are coded into the second and third octets of
the 3-octet opcodes.
Therefore, we can speed up the search process by checking whether
CID fields match, rather than comparing opcodes one by one.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Reserve a minimum node rx of 2 that can happen when local
central initiated PHY Update reserves 2 node rx, one for PHY
Update complete and another for Data Length Update complete
notification. Otherwise, a peripheral only needs 1
additional node rx to generate Data Length Update complete
when PHY Update completes.
Relates to #36381.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the post decrement in loop's conditional into
explicit decrement inside the loop so as to avoid
decrementing the maximum count without enqueueing free rx
buffers into the free rx buffer MFIFO.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add new custom transport type.
This allows user defined transport for MQTT communication.
The user must implement the transport procedure.
Fixes **#27015**
Signed-off-by: Vlad Tuhut <vlad.tuhut@raptor-technologies.ro>
This commit fixes the issue with a compilation of the sample that
uses printk function from cpp code when LOG2 is used and printk
is handled by logging subsystem.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Standard Arduino CLK signal is on D13,
nucleo_l476rg board has been modified accordingly.
Need an overlay to use default x_nucleo_idb05a1 spin D3 (PB3)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Move uart/usart pinctrl to common file.
Set status in dedicated m7 or m4 file.
But only one core can control a peripheral instance.
Arbitrary default choice:
usart1 --> m7
uart8 --> m4
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
RXTO event is generated always after ENDRX and driver relies
on assumption that ENDRX event is handled before RXTO. However,
when interrupt is preempted after ENDRX check returned false
and RXTO event is already set handling order would be swapped.
Added addtional check to handle RXTO event only if ENDRX is not
set. If ENDRX is set, it means that it is not yet handled. RXTO
event is not cleared and interrupt will be triggered again and
ENDRX event will be handled first.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The lis2dw12 sensor can generate the TAP interrupt only on INT1,
while DRDY can be generated on both. The int-pin DT property
specifiy on which pin the DRDY (and not the TAP) can be generated.
This commit fix the way the trigger is set: first the driver checks
the trigger type (DRDY or TAP), then it uses the int-pin information
only in DRDY case but allows setting TAP regardless of int-pin (it
always routes it on INT1).
The previous code was first checking int-pin: if it was INT2 then
the driver refused setting TAP triggers.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit aligns lis2dw12 sensor driver to latest multi
instance sensor driver model.
In particular it makes use of the stmemsc common routines
and move ctx handler inside struct config, so that the
bus_init routines can be totally avoided.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Remove all odr values from Kconfig and always init it
at 12.5Hz. It is responsibility of application to set
the rate to a different value using SENSOR_ATTR_SAMPLING_FREQUENCY.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move lis2dw12 trigger pulse configurations from Kconfigs to Device Tree.
Moreover the dts properties have been renamed as 'tap', which sounds a
better name to immediately catch the feature behind it. Since tap
threshold cannot be zero, this value (which is the default in dts
binding) is used to enable/disable the device feature per each axis.
The event can be generated on INT1 only.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use gpio_dt_spec structure (and related APIs) in config for configuring
the gpio used for drdy and pulse interrupts.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Create a common binding file that will be included by all bindings
handled by lis2dw12 driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a device node for the FMC controller found in stm32f427, f437 and
f446 devices, works fine with the current memc_stm32_sdram driver.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Default the option MEMC_STM32 to "y" when the device node is defined and
enabled, so that the driver is selected automatically when the board
supports it and MEMC is enabled.
Remove the default conditional on serise as it's redundant with the one
in soc/arm/st_stm32/common/Kconfig.defconfig.series.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add support for RT1170. The fuse register that holds
the unique device ID is different as compared to the
RT10XX series
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Added RT10xx and RT11xx configs
2. Added a new soc file for rt117x. There are clock differences
between the RT10xx and RT11xx series, hence the soc files
have been separated.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Direct openthread API usage requires explicit locking,
which is also used internally.
Exposing a work queue through the openthread context allows
work to be submitted without the need to block other threads.
In particular with CONFIG_OPENTHREAD_MANUAL_START, application
logic can offload work which otherwise would need to wait for
the lock to become available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit resolves warning ARM_MPU & HW_STACK_PROTECTION
during build. The MCU in STm32_Mini_dev (black & blue) has
no MPU support, but MPU was still enabled in defconfigs which
was the reason behind warnings. This commit removes
ARM_MPU & HW_STACK_PROTECTION from defconfig for both
STm32_Mini_dev development boards.
fix: zephyrproject-rtos/zephyr#36408
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
The hci_le_remove_cig command shall only be sent as the
master/central. Implemented this by early termination in
bt_iso_cleanup as the slave/peripheral.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
coap_response_received returned NULL if the observe option was out of
order, however it makes more sense to return the coap_reply handler
without actually calling it.
Additionally the reorder check has been modified to partially match
the RFC.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new extension to support the :kconfig: role and .. kconfig::
directive. This removes the need of using :option:.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF5 802.15.4 driver tries to establish a rpmsg channel
with the network core, so the network core must be started
earlier. Therefore, decrease the priority level of the task
responsible for initializing the board.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
- bugfix: Accept initial tftp server reply from a port different than
the one used to establish the connection (typically 69) as mandated
by RFC 1350. Previous implementation was not standard compliant.
- bugfix: close socket in case of error or timeout.
- bugfix: Reset retransmit counter after receipt of a good packet.
- bugfix: Use CONFIG_TFTP_LOG_LEVEL to set log level.
- api: upon successful receipt of the file set `client.user_buf_size`
to the size of the file received.
- Restructure the code, comments.
- Limit usage of global variables.
- Limit usage of `goto`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The purpose of this PR is to automatically test the
host in the native environment.
It is used to simulate /dev/tty*, can replace by /dev/pts/*.
Also, device log will be output to stdio by default.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
UART CR_SIN interrupt enable/disable are invoked when CONFIG_PM enable.
This removes the guard for UART CR_SIN interrupt enable/disable to fix
the build issue.
Fixed#36520
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
bits property indicates the number of in-use slots of available slots
for GPIOS. We have a similar property ngpios in gpio-controller.yaml,
we will use ngpios to calculate port_pin_mask. Let's remove bits and
only use ngpios.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Enable Instruction Cache
Warning: no flash driver yet available for STM32l5
But cache coherency management (cache invalidate)
will be rerquired when implementing flash driver.
ICAHE must be disabled for any flash write opeartion.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Enable Instruction cache accelerator for Cortex M4
first 1MB of Flash.
As per Reference Manual: no need for cache coherency management
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Similar to #32218 and #34032
Flush ART cache before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Similar to #32218 and #34032
Flush ART caches before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Not enough time to review changes in these subsystems.
Propose to have VenkatKotakonda as KSCAN subsystem owner instead.
Adding SoC-specific driver owners.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This implement the same flush cache functionality already present in the
other stm32 series flash drivers, used to avoid bus errors when writing
big chunks of data to the flash.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The flash_stm32l4x driver seems to work out of the box on the WL series.
This just adds the necessary config changes to let the driver build and
run when SOC_SERIES_STM32WLX is selected.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Increase the storage partition size to 16kB, 8x2kB pages. This makes the
default config usable for testing subsystems that need multiple pages.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Fix peripheral maximum transmit time, maximum receive time
and radio event length time reservations when connection
established using Extended Advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix central maximum transmit time, maximum receive time
and radio event length time reservations when connection
established using Extended Advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the temperature is lower than 20C, adc_temperature is smaller than
(data->t_ref << 8), which should yield a negative value for dT. While dT
and adc_temperature are correctly declared as signed, the subtrahend is
wrongly casted to unsigned, yielding insanely high temperature values.
Fix that by casting it to int32_t instead of uint32_t.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have some static variables var, zeroed_var and bss_var
in mem_partition.c and we only assert the value of them in
the same file, so the compiler may pre-calculate it in compile
stage, it's fine usually.
But for variable zeroed_var (= 20420), we force to put it in bss
section in link stage, the value will change in bss clean stage, so
we will get a wrong result.
Let's add volatile for these variables to disable pre-calculation.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This change has more detail about providing the I2C peripheral
device's address to help pinpoint any issues that are device
specific and not bus specific.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Use DEVICE_DT_GET instead of device_get_binding to obtain the controller
node, so that the device address gets resolved at link time.
This means we can move the pointer form the data to the config
structure, and get rid of the data structure and associated boilerplate
entirely.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert the various device_get_binding() calls used to get the device
clock node to use DEVICE_DT_GET. The latter is processed at link time,
so it should be a bit more efficient.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
After #35702, the provisioner is unable to mark a link as closed, as
it depends on the send_end callback to be called, so it can start its
timer. PB-Adv keeps a reference to the buffers of reliable messages,
which prevents this callback to be invoked, as the buffer destructor is
never called.
Move scheduling of the retransmit timer to the initial transmission, and
replace the timer based LINK_CLOSE message tx duration with a message
counting solution.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Found out that ITE IT8XXX2 series board image is not displaying
properly. In the original doc page of the RISC-V ITE IT8XXX2 series
board image is shrinked.
Fix resolution to display image properly.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Instead of explicity ORing together the compatible drivers,
CAN_RX_TIMESTAMP now depends on CAN_HAS_RX_TIMESTAMP
which is selected by the drivers primary Kconfig option. In addition,
stm32fd does not need to select this option since it selected by
the underlying M_CAN driver.
Signed-off-by: Abram Early <abram.early@gmail.com>
Essential type of LHS operand (64 bit) is wider than essential
type of composite expression in RHS operand (32 bit).
LHS "t" variable is 64 bit, and RHS (from_hz / to_hz) is 32 bit.
Cast RHS composite expression to the uint64_t type.
Found as a coding guideline violation (MISRA R10.7) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add power management support to STM32L0 series.
The SoC have a single stop state that can be used with LPTIM as a system
timer, as well as a standby mode where the system resets on exit.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The stm32_lptim driver is hardcoded to use lptim1.
Make the Kconfig option depend on the presence of the node label in the
devicetree, so that there's one less list of supported SoC to keep track
of.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add the code owner entries for all files related to the Xilinx GEM
Ethernet device driver.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
The NXP LPC syscon driver failed to build on several platforms for
various reasons. We need dts support on LPC55s1x and LPC55s2x, the
driver doesn't seem like it will work on LPC54114 so we exclude it
there for now.
Additionally, fix a dtc warning on LPC55s6x based on unit-address in
the node naming needing to be lowercase.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove includes from the tag file. If we have a change to an include
that implies some API change which may show up somewhere else so we
want to build as many tests/samples as possible in that case.
Also added a comment about keeing entries sorted alphabetically.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide mapping from cy8ckit_062_ble to Arduino-R3 headers.
The pins can have multiple functions that may interfere with
GPIO and/or communications.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Remove the bt_conn pointer from the AICS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Initializes proxy_send's attr pointer, which in theory could be
uninitialized if neither gatt proxy or PB GATT is enabled while proxy.c
is enabled.
This scenario is not really possible with the current kconfig structure,
but is reported as a potential error by Coverity, and should be fixed
for future proofing purposes.
Fixes#36314.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The openthread initialization in turn calls platform specific
functions, lock the API during this step.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The mute_val pointer could be NULL when dereferenced in the
callback. Change to be a simple value which is just assigned
instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In dt_label_with_parent_compat_enabled, it maybe that there is
no node matching expected label.
In this case don't generate error, but return False.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert pin setting and getting to `struct gpio_dt_spec` variants to
demonstrate usage of the new API.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add helpers to allow providing a `struct gpio_spec_dt` directly to
`gpio_pin_get`, `gpio_pin_set` and `gpio_pin_toggle` functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a function for the VCS client that gets the bluetooth
connection pointer if a given VCS client instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the VCS API to use the bt_vcs struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change to use the generic bt_vcs struct instead of the bt_vcs_client
struct, to align better with the future API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the type of the vcs_inst in vcs.c to bt_vcs instead
of bt_vcs_server to align better with the future API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_vcs_discover so that a client
will get a bt_vcs pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_vcs struct that represents a VCS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the MICS API to use the bt_mics struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change to use the generic bt_mics struct instead of the
bt_mics_client struct, to align better with the future
API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the type of the mics_inst in mics.c to bt_mics instead
of bt_mics_server to align better with the future API change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_mics_discover so that a client
will get a bt_mics pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_mics struct that represents a MICS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The parser module collides with a module in python called parser.
Doesn't seem to be a problem in Linux but for some reason the
search/include order in Windows causes python to import the wrong
parser. The change is to rename the module to dictionary_parser
to avoid the name space collision.
fixes: #36339
Signed-off-by: David Leach <david.leach@nxp.com>
- Coverity think it is out-of-bound writing
because the codes write two bytes to address (&hdr->length)
that hdr->length is uint8_t. Coverity doesn't think about
the one more byte after the hdr->length.
- Use net_buf_push to resolve this issue.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
The test case part in test_arm_interrupt, which is
triggering a SysTick IRQ (when SysTick is not used
for system timer implementation), to catch a spurious
interrupt is not really testing what it is designed
for. The reason is that the z_arm_exc_spurious has
be re-designed to be invoked only if the kernel is
built without support for system clock, i.e. with
CONFIG_SYS_CLOCK_EXISTS=n, but this configuration is
not compatible with ZTESTs and is, therefore, never
tested in this test, in any configuration. When the
SysTick is not implemented in the HW, it is not
possible to set the PendSTSET bit, so this is not
possible to execute this part of the test case, anyways.
What we have been catching as an error, here, is the
ASSERT in the sys_clock_isr() weak implementation, but
asserts are verified earlier in this test case, so this
part is really redundant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an explanation comment, so no one in the future
will try to change that part of the code.
Add parasoft tags to suppress a violation in static analysis tool
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
I cannot invest the time required for maintaining the networking
stack anymore, so I am stepping down from the maintainer role.
I am proposing Rober Lubos to be a new network maintainer.
I have been working with him for several years, and he is always
very helpful and knowledgeable to review and comment patches and
issues. He knows the network stack well and will for sure be able
to handle the task as he has been doing the maintenance already
for a long time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: Robert Lubos <robert.lubos@nordicsemi.no>
The document build system has been complaining about use of
no longer existing Kconfig option.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The following options, marked to be deprecated in release 2.5, have
been finally removed from Kconfig:
FS_LITTLEFS_FC_MEM_POOL_MIN_SIZE
FS_LITTLEFS_FC_MEM_POOL_MAX_SIZE
FS_LITTLEFS_FC_MEM_POOL_NUM_BLOCKS
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The LittleFS file cache has been completely switched from k_mem_slab
to heap allocated. The *_MEM_POOL_* kconfig variables no longer
affect the code.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added notify_timeout_cb to struct lwm2m_ctx to allow application to
handle notify timeout
Added lwm2m_rd_client_update to lwm2m.h to allow application to
trigger registration update
Added notify_message_timeout_cb which calls notify_timeout_cb from
struct lwm2m_ctx and logs an error message
Fixes#31499
Signed-off-by: John Power <john.power@xylem.com>
The code depends on the order of evaluation 'z_x86_check_stack_bounds'
function arguments.
The solution is to assign these values to variables and then pass
them in.
The fix would be to make 2 local variables, assign them the values
of _df_esf.esp and .cs, and then call the function with those 2 local
variables as arguments.
Found as a coding guideline violation (MISRA R13.2) by static
coding scanning tool.
Change "int reason" to "unsigned reason" like in other functions.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
With 64 bytes heap and 1 byte allocation on a big heap, we get:
0 1 2 3 4 5 6 7
| h | h | b | b | c | 1 | s | f |
where
- h: chunk0 header
- b: buckets in chunk0
- c: chunk header for the first allocation
- 1: chunk mem
- s: solo free header
- f: end marker / footer
max_chunkid() was returning h->end_chunk - min_chunk_size(h), which is
5 because min_chunk_size() on a big heap is 2. This works if you
don't have the solo free header at 6 and the heap is like:
0 1 2 3 4 5 6
| h | h | b | b | c | 1 | f |
max_chunkid() in this case gives you 6 - 2 = 4, which is the right
chunkid for the last chunk header.
This commit replaces max_chunkid() with h->end_chunk and "<=" (less
than or equal to) with "<" (less than), so that it always compares
against the end maker chunkid, but the code won't touch the end maker
itself.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
sometimes ninja fails to launch qemu, the sub-thread
can't read anything from qemu pipeline, then the
corresponding testcase will timeout. Then the
sub-thread will get blocked if it call join()
set terminate as the Handler's method, then
Handler's children class can call it
Signed-off-by: Jingru Wang <jingru@synopsys.com>
This commit clears current settings of the PWM perihperal
that are stored inside device structure.
This makes sure that PWM period and prescaler is configured
as expected after driver was suspended.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
NPCX WIMU CR_SIN is used to wake up soc from NPCX sleep power state.
The wake-up IRQ enabled when UART init. It causes the wake-up IRQ to
generate many extra interrupt events, which causes the system too busy
to handle other events. This PR moves the UART wake-up IRQ enabling
from UART init to npcx_power_enter_system_sleep() to avoid the
interrupt storm.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Set the defalut value of SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option
from the Device Tree. The `clock-frequency` property of the DT cpu@0
node is a single source of truth defining the CPU frequency. This is
the value used e.g. by all Atmel drivers.
For Atmel SAM family CPU clock is currently the only supported system
clock source. Ensure that kernel understanding of the hardware clock
frequency is the correct one.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add flash driver for it8xxx2. The driver can implement
flash read, write and erase that will be mapped to the
ram section for executing.
TEST="flash write 0x80000 0x10 0x20 0x30 0x40 ..."
"flash read 0x80000 0x100"
"flash erase 0x80000 0x1000"
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
According to the rule MISRAC-2012 21.4.b the standard header
file <setjmp.h> shall not be used. Suppress it, because it raises
violation in a testcode, not in a runtime code.
Tag suppresses reporting of violation for the current file,
starting from the line where the suppression is located.
Found as a coding guideline violation (MISRA R21.4.b) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Demonstrate use of bt_gatt_find_by_uuid in peripheral sample. This
avoids the magical array index.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Expose a helper function to the application that searches the local
database for the given attribute from its UUID.
Provide arguments to limit the search that matches the service
declaration to make it easy to limit the search to a specific service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow to pass attribute as NULL pointer when using notify or indicate by
UUID. This will use the entire handle value range to search for an
attribute with a matching UUID.
Document optional parameters, and clarify attr and uuid usage in the
variable declaration in the struct for clarification.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since we now have separate Kconfig symbols for the different
MPS2 AN521 board variants, we need to update the BOARD switch
for the TF-M target on MPS2 AN521.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A major update to the MPS2 AN521 build instructions, covering
building with TF-M for CPU0 and building for CPU1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introduce the fpu tag to tests that explicitly enable
the FPU and FPU_SHARING Kconfig options. The tag could
be used to run all FPU-related tests in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable testing Arm architecture and Kernel unit tests on
the mps2_an521_remote platform, with CONFIG_FPU and
CONFIG_FPU_SHARING enabled. This is done by enabling the
arm and fpu tags on the mps2_an521_nonsecure board target.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When we are building applications with openAMP on CPU1, we do not
need to trigger a build an empty binary for CPU0, as this will be
take care of by the dual core sample anyways.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a project to build an empty binary for AN521 CPU0,
which will only serve to wake up CPU1, and let samples,
and tests to execute as standalone applications in CPU1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add an option to build a CPU0 image, when we are building
applications for AN521 CPU1 core. This image will be an empty
binary that will basically boot the device and wake up CPU1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Select Kconfig option SOC_MPS2_AN521_CPU0 in board
definitions of MPS2 AN521 targets which build on
CPU0 of the MPS2 AN521. This is the case for the
mps2_an521 and mps2_an521_nonsecure targets.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
MPS2 AN521 is a dual (Cortex-M33) core where the two cores
have different capabilities. E.g CPU0 implements TrustZone-M,
while CPU1 implements the FPU. Therefore we introcude separate
Kconfig symbols for the two SoC variants, and use these to
select the different Cortex-M capabilities. We also update
the definitions of __MPU/FPU/SAU/DSP variant in soc.h to make
them get the value from the Kconfig settings, directly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With respect to the mapping between the CPU variant
and the FPU we add an entry for Cortex-M v8-M CPU
variants without DSP. This should cover the case
of a Mainline Cortex-M which implements the Floating
Point extension but not the DSP extension.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current CMakeLists.txt contains a function that is called from
the same file.
This patch removes the abstraction, allowing to remove many
lines of parameter handling.
Additionally, with this patch, the Cmake argument handling is now
done via a list, which removes many more named variables.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Adding support for beagleV Starlight board based on Starfive JH7100
SoC. It's a base support, no drivers other than uart has been tested.
Signed-off-by: Rajnesh Kanwal <rajnesh.kanwal49@gmail.com>
Increase the ticker operations count in ULL high context
when Extended Advertising Connection Establishment on Coded
PHY is supported.
This fixes assertion in Controller when initiating a
connection on Coded PHY, wherein two scan instance ticker,
one window stop ticker, and a new connection instance
ticker operations needs to be enqueued.
Relates to commit a6b8eba7c5 ("Bluetooth: controller:
Implement disabling the other PHY initiator").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed.
Add a comment to the empty default case.
Add a LOG_ERR to the default case.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The atmel pwm driver doesn't have a easy way to test and show
functionality to users. This re-assign led-0 function from
gpio-leds to pwm-leds. The current led-0 entry at gpio-leds
was keep with status disabled, as refence. It allows test pwm
driver for SAM Cortex-M7 MCUs. The led-1 assume Zephyr sample
default led0 alias.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit fixes diag repeat command port by fixing issue with
incorrectly handled repeat timer.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit enables soc-flash support in disco_l475_iot1
only for flash test. Using overlays, it adds soc-flash storage
partition and deletes qspi-flash storage parition for
flash test. Both flash test and spi_flash application
has been tested on disco_l475_iot1 platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit changes from upper case to lower case in
"reg = <0x000D8000 DT_SIZE_M(7)"
"reg = <0x00000000 0x000D8000>"
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add a new Kconfig option, BT_ISO_UNICAST, to make it possible
either configure unicast only, broadcast only or both.
This results in some code being moved, but not modified, and
should not effect anything.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit enables soc-flash support in stm32f746g_disco only for
flash test. Using overlays, it adds soc-flash storage partition and
deletes qspi-flash storage partition for flash test. Both flash test and
spi_flash application has been tested on stm32f746g_disco platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Python is used by the west meta-tool as well as by many scripts invoked
by the build system. It is easy to run into package incompatibilities
when installing dependencies at a system or user level. This situation
can happen, for example, if working on multiple Zephyr versions at the
same time. For this reason, the getting started guide has been updated
to offer instructions for both, using Python virtual environments and
installing globally. Python virtual environments has been added as
another choice for the reasons just mentioned.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Function used for filtering "dt_compat_enabled_with_label" was not
working as expected as it was not taking into account that we're
looking for a children/parent combination:
Provided "compat" with enabled status should be the one of the parent
of the node matching given label.
Function is then reworked to take this into account.
And to make it's usage clear:
- function name is changed to be clearer on the intention
- args order is reversed to be more logical wrt the intention
Users of the function are also updated to take the change into
account.
Fixes#36093
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the device tree data for the 4 Ethernet controllers integrated into
the ZynqMP SoC, GEM0 to GEM3.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Add support for the Xilinx GEM Ethernet controller, which is integrated
in both the Xilinx Zynq and ZynqMP (UltraScale) SoC families. The driver
supports the management of a PHY attached to the respective GEM's MDIO
interface.
This driver was developed with ultimately the Zynq-7000 series in mind,
but at the time being, it is limited to use in conjunction with the
ZynqMP RPU (Cortex-R5) cores. The differences are minor when it comes
to the adjustment of the TX clock frequency derived from the current
link speed reported by the PHY, but for use in conjunction with the
Zynq-7000, some larger adjustments will have to be made when it comes
to the placement of the DMA memory area, as this involves the confi-
guration of the MMU in Cortex-A CPUs.
The driver was developed under the qemu_cortex_r5 target. The Marvell
88E1111 PHY simulated by QEMU is supported by the driver.
Limitations currently exist when it comes to timestamping or VLAN
support and other minor things. Those haven't been implemented yet,
although they are supported by the hardware. In order to be fully
supported by the ZynqMP APU, 64-bit DMA address descriptor format
support will be added.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
This CL introduces six properties, clock-frequency, core-prescaler,
apb1/2/3/4-prescaler in pcc (Power and Clock Controller) node to
configure clock settings. It also removed the original Kconfig options
used for the same purpose.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
In npcx series, we use ITIM64 as system kernel timer. Its source clock
frequency must equal to CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC. This CL
added check during initialization to prevent ambiguous condition.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Rename OSC_CLK as OFMCLK to meet npcx datasheet. The Oscillator
Frequency Multiplier Clock (OFMCLK), which is derived from
High-Frequency Clock Generator (HFCG), is the source clock of cortex-m4
core and most of NPCX hardware modules.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
There is a small window between when socket is created and
before it is bound to a local address, where the local address
pointer might be NULL.
Fixes#36276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a paragraph to mention git bisect as a way to pre-analyze
regressions.
Aim is to reference this section from github issues when regressions
are reported and encourage users to do this first round of
pre-analyzis
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
it need to be a && between two condition, to satisfy
the comment: only 12 / 13 bit resolution is supported,
if FSL_FEATURE_LPADC_HAS_CMDL_MODE is not defined. not
using ||.
Signed-off-by: Crist Xu <crist.xu@nxp.com>
We should gurantee that we do not use SRAM during Zephyr early
boot, until SystemInit has returned. This commit aims to ensure
that SystemInit will be branched to, without first pushing args
to stack, even when no optimizations are selected. We chose to
define z_platform_init in assembly directly (instead of using
inline assembly) as it appears to be a cleaner design.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use a common implementation for z_platform_init
in nRF SoC family. The implementations are
identical, so no need to maintain separate
identical versions of them. The commit does not
introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since we are writing a register it makes more sense for the type
to be unsigned. This hopefully address a compile warning we get
with clang:
error: implicit conversion from 'int' to 'int16_t' (aka 'short')
changes value from 32768 to -32768 [-Werror,-Wconstant-conversion]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we only build on native_posix, we can build all the sensors
together in one pass. This makes it easier to manage the conf files
going forward.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver build_all tests only need to build a driver once and
so limit the sensor tests to only build on native_posix.
We tweak CONFIG_SYS_CLOCK_TICKS_PER_SEC as part of this change as
hp206c requires this setting to build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If CONFIG_ICM42605_TRIGGER is not set the driver doesn't build. There
are a few places that need ifdefs based on CONFIG_ICM42605_TRIGGER for
the driver to build correctly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
BT_DEVICE_NAME_MAX can be up to 248 bytes. This may exceed ATT MTU size,
which will cause the offset in write_name() to be non zere, resulting in
BT_ATT_ERR_INVALID_OFFSET. However, device name should be writable up to
it's defined size, using subsequent prepare write requests. Error should
be returned if offset exceeds size of device name, and if total size of
new value exceeds BT_DEVICE_NAME_MAX, BT_ATT_ERR_INVALID_ATTRIBUTE_LEN
shall be returned.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This commit enables emulation of the `mps3_an547` platform
using, by default, The Arm Corstone-300 MPS3 FVP executable.
This FVP includes support for emulating the Ethos-U55 NPU.
Optionally, the default FVP selection can be overriden in favor
of QEMU, which supports the MPS3 without the proprietary
Ethos-U55 FPU extension. To enable qemu as an emulation target,
add `-DEMU_PLATFORM=qemu` when building an mps3_an547 image.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Configured UART/UARTE input pins to have pullups. Otherwise when
uart is disconnected pins are floating and generate receiver
errors.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit enables iwdg support for stm32l562e_dk platform in
device tree. This has been tested on stm32l562e_dk platform with
tests/drivers/watchdog/wdt_basic_api and samples/drivers/watchdog.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit fixes the compilation warning occurred due
to usage of upper case in "interrupt-controller@4000F400".
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add GPIO_flag values for GPIO DTS creation that
allows for pins that do not use the default
voltage. IT8xxx2 supports setting voltage
levels for each pin. The default for this SoC
is 3P3 but they can be set individually to
1P8.
This will be used, for example:
i2c_c_scl {
gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
enum-name = "GPIO_I2C_C_SCL";
label = "I2C_C_SCL";
};
Signed-off-by: Denis Brockus <dbrockus@google.com>
TCP unacked_len can be set to zero in tcp_resend_data(),
and then be minus by len_acked when ACK is received,
resulting in a negative unacked_len value.
Fixes#36390
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
- Fixed some incorrect streamport references that pointed to the
base streamport files instead of those dedicated for Zephyr.
- Updated the source file compilation to match the updated
TraceRecorder module.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The definition of the STM32_LSE_CLOCK is given by the
drivers/clock_control/stm32_clock_control.h
to the hci/ipm_stm32wb driver
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit adds PWM support in dtsi for stm32l5 series. Adding
other timer nodes for different stm32l5 series PWM capability.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Add the I2C version of the MS5607 (the SPI version was already enabled)
so that it gets compiled tested.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add multi-instance support to the MS5607 driver. This is needed to
easily add I2C support later. It also simplifies a bit the driver
initialisation by using more static values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
axis1bit16 and axis3bit16 unions are no longer used
and can be deleted from all .h files that are referencing
them.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Reprocess keyscan event processing in case of an I2C bus read
error. Otherwise, the HT16K33 will be stuck (when used in IRQ mode, not
in polling mode) and no new IRQs will be delivered.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Convert the keyscan portion of the Holtek HT16K33 driver to adhere to
the kscan API instead of the GPIO API.
When this driver was introduced the kscan API was not present. The
keyscan driver was therefore implemented as a GPIO interrupt driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The was a missing comma in the DEVICE_DT_INST_DEFINE macro and the
SAME71 HAL tweaks the name of a struct so we have to work around that.
Fixes#36095
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Increase main and system workqueue stack sizes to avoid overflows
as the LoRaMac-node library is quite stack-hungry.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Update the LoRaMac-node library to the last stable release and fix
the Zephyr glue code to match it. Move CMakeLists.txt to the main
Zephyr repository to simplify loramac-node module maintenance.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Modify the check from checking the feature bit to
checking the command bit. This ensures that we
don't send the read buffer size V2 to a controller
that does not support it.
This also moves the entire ISO init procedure into
a separate function to avoid having a large
ISO-only block in `le_init`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a mention of the Kconfig hardening script hardenconfig to
the Kconfig documentation to promote awareness of its existence.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This commit removes a superfluous null pointer check.
The device is accessed via a label.
so in case it is not available a build error arises,
but the pointer won't ever be null.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This check is present in att_read_rsp(), but att_read_mult_req and
att_read_mult_vl_req do not use it. Add this check to these functions.
This was affecting GATT/SR/GAS/BV-08-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Make kscan init priority higher, since it is lower than some buses like
I2C, making some devices to fail initialization if not tuning
priorities.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow caller to specify microsecond accuracy and not convert
to milliseconds.
Fixes#36072
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make zsock_select() a syscall so that the following commit
can call the internal poll implementation directly. This is
needed as zsock_select() will not call zsock_poll() directly
in order to allow select to use microsecond timeout accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
GPIOTE1 on the nRF5340 SoC is always accessible as a non-secure
peripheral. However, it is only defined in the non-secure DTSI file.
This is therefore a missing node in the secure DTSI file, since
non-secure addresses are accessible by secure software.
Move the node definition to a common include file and pull it into the
app core DTSI as well. To keep things clean, adjust the node labels so
that:
- 'gpiote0' and 'gpiote1' are defined in the secure DTSI
- 'gpiote0' is not defined in the non-secure DTSI
- 'gpiote' is defined in both secure and non-secure DTSIs
- 'gpiote' refers to the same node as 'gpiote0' in the secure DTSI
- 'gpiote' refers to the same node as 'gpiote1' in the non-secure DTSI
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The sram1 node in nrf5340_cpuapp.dtsi represents the SRAM accessible
to the network core on the SoC.
However, while the network core can access the app core's SRAM, the
app core cannot access the net core's SRAM. Therefore, the sram1 node
should only appear in DTSI files for the net core, and not the app
core.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Because it is not always possible to determine whether
a request is for Audio class or not, all requests are passed
to it. This can lead to the requests, to e.g. HID interface,
being hijacked by Audio class.
Ignore return value of Audio custom handler as it is not relevant here.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since the settings are stored in the core now,
we can remove REQ_GET_INTERFACE part from custom handler
and simplify the code. Return value is no longer relevant
since custom callback does not need to interfere with the
request handling process.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Store alternate interface settings and
return alternate on GetInterface request.
Fixes: #24200
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This option is deciding whether bootutil_public library supports
multi-image procedures. MCUboot have its own definition which is
unavailable zephyr application. Introduced option declares similar
option for the application.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add boot_write_confirm_multi() and boot_request_upgrade_multi() APIs so
that the user can set the image with given index as pending, confirmed.
This is needed for enabling the mcuboot multi-mage boot feature by
the zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change Highlights:
- Fix error check after `k_work_reschedule_for_queue`. A value of 1
means job was scheduled which was resulting in a ton of "<err>
wifi_eswifi: Rescheduling socket read error" logs getting printed
due to the erroneous check
- When using the B-L475E-IOT01A, attempts to use a TLS socket result
in a hang when socket offload is enabled so I'd like to have a way
to disable the option. To accomplish this, I I switched the
`CONFIG_NET_SOCKETS_OFFLOAD=n` Kconfig option from `select` to
`imply`.
- There was a missing `net_context_set_state()` call when
`CONFIG_NET_SOCKETS_OFFLOAD=n`. I applied the same fix from #30664
for this case to fix the issue.
Signed-off-by: Chris Coleman <chris@memfault.com>
This commit adds the flash driver for nucleo_f207zg platform.
This has been tested with flash test application.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables flash support for nucleo-f207zg in device tree.
The last sector of 128KB is used as storage partition.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This is a follow-up to commit 60d9988401.
Add a third option for the HFXO capacitance that keeps the default
value of the XOSC32MCAPS register untouched. The message in the above
commit incorrectly claimed that external load capacitors for HFXO
(the reset value of the XOSC32MCAPS register) was the configuration
in effect before. In fact, the register value was modified during
the device trimming in the SystemInit() function to use the internal
capacitors, and that is the configuration required for proper RADIO
operation on nRF5340 DK, for instance.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Sphinx provides a way to persist data across builds: the
BuildEnvironment. The build environment is automatically managed by
Sphinx, so there is no need to take care of loading/dumping cache files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use file hashes instead of paths and modification times. This method is
fits better on systems using cache mechanisms. Note that hash is
computed using content obtained in UTF-8 text mode for portability
reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Document that calling settings_load is required when the application is
not creating and managing the identities of the stack itself.
The application will not be able to use all features of the stack before
the identities have been loaded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We do not need the return value of k_sem_take() so ignore it.
Coverity-CID: 236602
Fixes#36313
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We were testing modified_tags.args before we called get_twister_opt.py
so it would never have been created and thus twister_exclude_tag_opt
would never get set correctly. Move the check to after we call
get_twister_opt.py
Also we need to remove modified_tags.args once we are done with it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the host toolchain is used, `-nostdlib` option is not specified
and therefore all default libraries, including the libgcc and its
components, are automatically linked -- so it is not necessary to
manually link them here.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The host toolchain makes use of the host toolchain libraries (i.e.
`-nostdlib` is not specified), so it is not necessary to detect the
toolchain libgcc path and specify one manually.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the build system to always detect the libgcc path
for the host platforms regardless of the target architecture.
The native_posix_64 target previously used the x32 ABI (`-mx32`) and
the multilib for this ABI was not commonly available in the x86-64 host
toolchains.
That is no longer the case because native_posix_64 had been updated to
use the x86-64 ABI (`-m64`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the `NOT no_libgcc` condition for the automatic
libgcc path detection.
The `no_libgcc` variable was previously set in this file to exclude
libgcc detection for the x86-64 targets because the x86-64 arch used
x32 ABI (`-mx32`) and the multilib for this ABI was not commonly
available. This is no longer the case (x86-64 targets now use `-m64`)
and libgcc must always be available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It is necessary to put the device in standby to change the contents of
CTRL_REG1. This register is used to change the sampling frequency.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add C++ area, which covers the C++ language support subsystem and the
relevant tests and samples, with myself as a maintainer.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add "CMSIS-DSP integration" area, which covers the module configs and
tests for the CMSIS-DSP library, with myself as a maintainer.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adding myself as a maintainer for the "C library" area covering both
the minimal libc and newlib, and updating the list of the relevant
files.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Include the lpcxpresso55s69_ns board to the list of platforms
that support running the sample for the TF-M regression tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This will let us get compiler warnings whenever the return value of
specific functions stays unused. I called this __must_check since that's
the name Linux uses as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes: #36185
CMake >=3.20 now supports relative paths in Ninja depfiles.
As Zephyr still supports the use of CMake 3.13, and the current use of
DEPFILE in linker/ld/target.cmake is already absolute path, then the
safest choice is to use old behavior.
This can be changed when Zephyr increases minimum required CMake to be
3.20 or newer.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If all connections were refused, we haven't reached part of
le_ecred_conn_req with connecting channels - thus i was never
incremented. PDU shall be created always with the length containing
full size of scid array - we always respond with all of the CIDs filled,
they just will be all zeros when all connections were refused.
This was affecting L2CAP/ECFC/BV-26-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
If the shell root command shall be set in the application, e.g. for
implementing a login scheme, it is an advantage to set this already
during shell init.
This is now implemented using a new Kconfig variable SHELL_CMD_ROOT.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
The RAM of can instances starts directly after it's predecessor.
This commit fixes can2 and can3 support for stm32g4 series.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Increase timeout to allow testing completion on all impacted boards
Slightly Increase jobs as well
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Property "st,prescaler" of binding "st,stm32-pwm" was set to 2
different default values 0 or 10000 in *.dtsi files.
Since this property rather depends on application than hardware
description, there is no reason to have 2 different default values
in use. Besides, it is a trap for pwm users that should take into
consideration this random default value.
Fix this by defaulting the property systematically to 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In case both, static IP address configuration and DHCP were used, and no
DHCP server was avaliable in the network, clearing the gateway address
rendered the network interface unusable as it's gateway configuration
was cleared.
Prevent this by removing the gateway clearing during the DHCP
inititalization. If the DHCP server is available in the network, the
gateway address will be overwriten after receiving the DHCP OFFER
message or cleared if there's no Router option is avaiable in the
DHCP OFFER message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Configure a timeout for send/recv operations so that the sample can
recover in case the connection stalls (for instance due to IP address
change on an interface).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add radio peripheral to nrf5340_cpunet DTS. The peripheral
description includes antenna matrix congiuration for Direction
Finding extennsion.
Appropriate binding file for nRF radio peripheral already egxists.
There is no default antenna matrix configuration. Antennas number
and GPIOS mapping to DFEGPIOS is project specific.
Complete configuration must be provided by end user as overaly.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The bq274xx fuel gauge does a softreset when configuring, after
which the device is polled and sealed. However the sleep logic
was inverted so the poll became blocking.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The STM32H7 series has a special ADC, which is calibrated
on the factory. The calibration values are stored in flash
and must be retrieved upon powering up the device.
Failure to calibrate the device leads to missing codes in
the ADC readings.
Fixes#35529
Signed-off-by: Lasse Sangild <lsangild@gmail.com>
This means a light requirements-doc.txt is enough for doc writers. See
previous discussions in PR #31199 and PR #31239
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
So when for instance adding some `import wrong_module` line to a sample
runner like bossac.py this adds the text between parentheses ( ) below:
The module for runner "bossac" could not be imported (No module named
'wrong_module'). This most likely means it is not handling its
dependencies properly. Please report this to the zephyr developers.
Test tip: changes to bossac.py do not trigger a fast, incremental doc
build. touch doc/guides/west/build-flash-debug.rst does it instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
When an ACL connection with active CISes terminates, inject CIS/CIG
teardown to ensure CIS is stopped before ACL disconnection completes.
This includes stopping CIG ticker when last CIS has stopped.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Maintaining the cis_handles array in ULL/LLL ISO group data amounts to
double book-keeping. This commit eliminates the array and introduces a
'getter' for obtaining CISes owned by a specific CIG, and iterate
through them.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When an ACL changes state to disconnected, all associated ISO channels
must be disconnected and cleaned up. This commit ensures that.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Use of CONFIG_THREAD_RUNTIME_STATS was added to this sample, but
caused issue because the call to z_thread_mark_switched_in()
is using k_cycle_get_32() before the timer is initialized.
Enable CONFIG_THREAD_RUNTIME_STATS_USE_TIMING_FUNCTIONS=y to
select hidden config CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT,
which calls to initialize the timer needed at boot for thread
runtime stats configuration.
Fixes#33275
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The CMake variable `TFM_ISOLATION_LEVEL_ARG` was not properly set when
application configures higher isolation level. This led to isolation
level always being to set 1.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Fix typo in configuration phase to prepare the driver
for incoming add of Interrupt driven uart mode.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add the ability to map file/dir paths of a PR to twister TAG. We
introduce scripts/ci/tags.yaml to conveys which files are associated
with which tag.
Since not all file/tags will be specified in tags.yaml we use the
combination of the files modified list and the tags.yaml information to
determine which tags can be excluded (ie if the file list doesn't match
any file in tags.yaml for a given tag listed there, we can that exclude
it).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds @Thalley and @asbjornsabo (and the others
from the parent directory) to the babblesim audio
test directory.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the settings in lpcxpresso55s69_ns.yaml to reflect the normal amount
of flash/ram that is allocated to the non-secure side.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT must be set for 802154_rpmsg
sample to properly allocate timers for nRF-802154 driver.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up multi-line strings so they will show up properly in the
bindings index in the HTML documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Moved can, spi, usb, usb_fs_phy nodes to f103X8 dts.
Adds CAN for f103X8 series.
Tested on stm32f103c8 soc.
Tested on stm32f103vb soc.
Signed-off-by: Bhavesh Bhojwani <bhaavesh.bhojwaani@gmail.com>
The Google server that the sample connects to sends a larger certificate
since recently. As the overall size of the message conveying the
ceritificate is ~4700 bytes now, current mbedTLS configuration did not
allow to reassemble the message and thus caused failure during the
handshake.
Fix this by increasing MBEDTLS_SSL_MAX_CONTENT_LEN parameter (with some
extra space for any future changes).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align cavs25 with cavs15/18 and add memory segment for uncached mapping
of the SRAM to linker script. Assign sections to uncached and cached
segments as done in cavs15/18.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Policy manager header has to be in the include for applications.
Also it had several function prototypes that are not part of the policy.
These functions were moved from the policy header to a dedicated private
header.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
PM_STATE_INFO_DT_ITEMS_LIST macro documentation was wrong. The example
usage was returning the wrong type and the macro name was also not
correct.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
I made an alignment error in a dts binding, but the build was
successful. After some debugging I found the following warning
explaining the problem:
'/home/casper/src/zephyrproject/zephyr/dts/bindings/gpio/
gpio-keys.yaml' appears in binding directories but isn't valid
YAML: while parsing a block mapping
in "<unicode string>", line 11, column 8
did not find expected key
in "<unicode string>", line 18, column 9
I think this should be an error as there shouldn't be any invalid yaml.
Signed-off-by: Casper Meijn <casper@meijn.net>
The macros are used to get the pin(s) of a given driver instance. Add
_INST prefix to match convention used by the devicetree.h. The original
macros can now be used to obtain pin(s) of an arbitrary device instance
identified by the nodelabel.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Use ticker_yield_abs interface to make scan window on
primary channel to yield when trying to scan auxiliary PDUs.
Fixes#30244.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add ticker_yield_abs interface to reduce ticks_slot_previous
value when radio events yield/stop earlier than their time
reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Implement numerical network operator id, location area code (LAC)
and cell id in modem context and modem shell.
Please note that the functionality to query these values must be
implemented in the modem driver.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
The old default of 1 makes provisioner devices useless, as they can only
provision themselves before they run out of space.
Increase the default value for CONFIG_BT_MESH_CDB_NODE_COUNT to 8.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add radio peripheral to nrf52820 DTS. The peripheral description
includes antenna matrix congiuration for Direction Finding extennsion.
Appropriate binding file for nRF radio peripheral already egxists.
There is no default antenna matrix configuration. Antennas number
and GPIOS mapping to DFEGPIOS is project specific.
Complete configuration must be provided by end user as overaly.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This API meets the requirements for marking an API stable:
- Test cases for the new API with 100% coverage: yes;
we have had coverage for every API macro since the beginning.
- Complete documentation in code. All public interfaces shall be
documented and available in online documentation.: yes, in the
reference documentation:
https://docs.zephyrproject.org/latest/reference/devicetree/api.html
- The API has been in-use and was available in at least 2 development
releases: yes; this API ws introduced in v2.3.
The basic design involving node identifiers and the macros that create
and operate on them has not changed since the API was introduced, and
it is in widespread use throughout the tree. As we head into a new
LTS, it's time to mark it stable.
This is more of an acknowledgement of reality than a big change, as I
don't see any backwards incompatible changes since the API was first
introduced in v2.3. (We have deprecated a lot of label related macros
that are no longer required now that we have DEVICE_DT_GET and
friends, but they're still there, and we're still testing them, just
as if this were a stable API.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modify aics.c to use the bt_aics struct instead of the
bt_aics_server struct. This is done so that there is less
difference between the internal struct usage and the struct
type used in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_vcs to bt_vcs_included, and
rename bt_vcs_get to bt_vcs_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_vcs as
an opaque pointer to a VCS service instance (local
or remote) to match the service instance pointers of
AICS and VOCS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_mics to bt_mics_included, and
rename bt_mics_get to bt_mics_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_mics as
an opaque pointer to a MICS service instance (local
or remote) to match the service instance pointers of
AICS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
commit 5e9c583c24 ("arch/x86_64: Terrible, awful hackery to
bootstrap entry") introduced a terrible trick which begins execution
at the bottom of .locore with a jump, which then gets replaced with
NOP instructions for the benefit of 16 bit real mode startup of the
other CPUs later on.
But I forgot that EFI enters in 64 bit code natively, and so never
hits that path. And moving it to the 64 bit setup code doesn't work,
because at that point when we are NOT loaded from EFI, we already have
the Zephyr page tables in place that disallow writes to .locore.
So do it in the EFI loader, which while sort of a weird place, has the
benefit of being in C instead of assembly.
Really all this code needs to go away. A proper x86 entry
architecture would enter somewhere in the main blob, and .locore
should be a tiny stub we copy in at runtime.
Fixes#36107
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After lwm2m async io was introduced with 32989a38f0,
one instance of function lwm2m_send_message() was left unchanged,
and makes build to fail when boostrap support is enabled.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Mark qemu_x86 and native_posix drivers to support both
TXTIME and PTP clock so that we can use txtime sample application
for testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that TXTIME parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbu parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbu
configuration options defined in IEEE Std 802.1Qbu-2016
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbv parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbv
configuration options defined in IEEE Std 802.1Qbv-2015
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flag Sphinx tabs style properties as !important, it looks like the
default style used by the latest extension version take precedence.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zephyr Bluetooth Mesh did not check whether the proxy message
was actually sent out, so that the response message could
not be received during reset. It did not solve the status
callback of the proxy sending message, so a new problem was
introduced after PR(#28457) merged.
bt_mesh_prov_send(&buf, public_key_sent))
This PR will try to solve the above problem, and will fix
the problem due to thread competition, and PR(#26668) will
not be necessary.
Compared with PR(#30138), it no longer consumes extra RAM
space and supports synchronization of group addresses
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Configures lpuart3 pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm2 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures flexcomm4 to operate in USART mode and enables the associated
peripheral clock and pinmuxes. This instance is attached to the Arduino
serial header pins and can be used for Bluetooth serial HCI with a
frdm_kw41z or other BLE controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This shield is working out of the box on Arduino connector,
even if it is not with all standard Arduino SPI CS/CLK pins.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Switch from using internal 6pf to internal 7pf load capacitor for LFXO.
Use a default clock accuracy of 50PPM as this matches lab results.
50PPM should be sufficient for common operating temperatures of
25degC +- 15.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
When frame counter is managed by the radio driver the upper layer
needs to be informed about the frame counter changed. The upper layer
looks for the most recent frame counter in the transmitted frame,
this is why the tx_payload need to be updated after processed by
the radio driver.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fixed issue that caused message to be not correctly reset even after
it is consumed after send sets errno to EAGAIN or EWOULDBLOCK
Signed-off-by: Dominik Dess <dominik.dess@grandcentrix.net>
Removing the CONFIG_TEST=y setting from the TF-M
integration samples prj.conf. TEST does not need
to be enabled in these samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The EFR32MG21 doesn't have a RMU and thus the driver isn't relevant for
that SoC series. Add a Kconfig exclusion so the driver isn't available
on EFR32MG21 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow the use of build configurations from testcase/sample yaml files.
This addition makes it easy to build a sample or a test with the options
provided in the test file by pointing to the test section to be built on
the command line of `west build`.
Fixes#31993
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct MEC15xx HAL value for DnX warn.
For consistency add automatic ack into the driver.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Fixes: #36101
The move of CMake invocation to a dedicated custom target, see #34868
results in tfm_cmake to always be considered out-of-date, causing CMake
to be reinvoked in the TF-M Binary dir, which again results in the
build command to rebuild.
This commit moves the invocation to a custom command with the
CMakeCache.txt as output. The custom target tfm_cmake is updated to
depend on CMakeCache.txt.
This mean that CMake for TF-M will only be invoked inside the Zephyr
build command if that file is missing.
If the CMakeCache.txt file is updated or TF-M CMake or source code is
modified, then the build command inside the TF-M build folder will
ensure correct re-run of CMake from within the TF-M build folder.
This ensures that TF-M will still rebuild if TF-M code is modified,
while at the same time avoid unnecessary rebuilds of TF-M code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enable building the LMP90xxx driver (move devicetree nodes over from the
sensors/spi.dtsi). Limit to building on a single platform as this
is just making sure the drivers compile.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The testcase.yaml had multiple tests defined but they didn't do anything
different. Remove the duplication and rename to drivers.hwinfo.api.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new userspace work queue API is not C++ compatible.
When changing from old API to new API (commit
b706a5e999, 4e3b926) the C++ compatibility
was lost.
Signed-off-by: Fredrik Gihl <fredrik.gihl@flir.se>
Fix wrong channel index send by controller in connectionless
IQ samples report. Former implementation reported value from
lll->data_chan_id which is not valid channel index.
Updated implementation reports value stored in IQ samples receive
node during periodic scanning event preparation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Out-of-tree boards directory is likely to have boards within subset of
architectures (e.g. only 'arm' boards) that are supported by Zephyr.
Currently script iterates over all architectures and tries to list
contents of boards/<arch>/, which might not be existing. This results in
'FileNotFoundError' exception:
Traceback (most recent call last):
File "/project/zephyr/scripts/list_boards.py", line 113, in <module>
dump_boards(find_arch2boards(parse_args()))
File "/project/zephyr/scripts/list_boards.py", line 32, in \
find_arch2boards
arch2board_set = find_arch2board_set(args)
File "/project/zephyr/scripts/list_boards.py", line 45, in \
find_arch2board_set
for arch, boards in find_arch2board_set_in(root, arches).items():
File "/project/zephyr/scripts/list_boards.py", line 78, in \
find_arch2board_set_in
for maybe_board in (boards / arch).iterdir():
File "/usr/lib/python3.9/pathlib.py", line 1149, in iterdir
for name in self._accessor.listdir(self):
FileNotFoundError: [Errno 2] No such file or directory: \
'/project/app/boards/arc'
Simply ignore missing boards/<arch>/ directories and skip to the next
arch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fixes ticker_by_next_slot_get for JIT scheduler by allowing iterating
through ticker nodes without ticks_slot information, and improves
performance for legacy ticker scheduling use.
To reduce the processing and context switching overhead, a new feature
is introduced via BT_TICKER_NEXT_SLOT_GET_MATCH, by which an operation
callback may be added via the ticker_next_slot_get_ext interface, and
the match function is then called when the ticker_job is processing the
request.
By returning true in this callback, iteration stops and normal operation
callback is invoked. If the match function returns false, node iteration
continues. This reduces the number of ticker_job executions for node
iteration.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We do not need the if BUILD_WITH_TFM guard in the main
Kconfig file, as the guards are present insude the respective
Kconfig files that are sourced by the main Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The TF-M project is higly configurable and we end up having
a growing number of Kconfig option definitions in the main
Kconfig file. This commit splits out the configuration options
for the TF-M partition and for the crypto partition configuration
into separate Kconfig files, for ease of reading. The commit
does not introduce behavioral changes.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Always source the Zephyr base soc and shield (board root) Kconfigs
directly from Kconfig instead of generated Kconfig files.
This has the benefit that it is no longer necessary to generate Kconfig
files to source SoC root and shield (board root) when no custom roots
are provided.
Also this cleans up the doc/CMakeLists.txt and ensures that the
doc/CMakeLists.txt is not getting out of sync with the Kconfig.cmake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The stack frame size, used for context switch, is rounded up to 16-bytes
alignment. Therefore, we need round down the pointer of top of the
pre-populated stack frame so that the preserved stack frame size is also
rounded up to 16-bytes alignment.
Fixes#29535
Signed-off-by: Shih-Wei Teng <swteng@andestech.com>
Since physical memory is no longer wholly identity mapped,
it is not needed to set the VM size to be larger than
physical memory size. The VM size was 2GB (max physical
memory size of x86 boards) + 1GB (for memory mappings).
So simply shrink the size to 1GB, as the kernel size is
small and we still have a large chunk of space to do
memory mapping.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With ACPI doing dynamic memory mapping and unmapping
to access ACPI tables, there is no need to identity
map all the physical memory anymore. So remove
the "select" statement in ACPI kconfig.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of accessing ACPI tables through physical address, do
memory mapping/unmapping so they can be accessed via virtual
addresses. This allows us to avoid identity mapping all
physical memory, and thus no need for a page table large enough
to map everything.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This limits the search for Extended BIOS Data Area (EBDA) to
0x80000 to 0x100000 as this is usually the area for it.
If 0000:040e has an address not pointing to this area, it is
probably an invalid address, and should not be de-referenced
to avoid segfault.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add the packet status flag value to the iso receive info
struct. This will allow an application to handle potential
lost or erroneous messages.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To support west OpenOCD path image flashing, this generates an npcx hex
image from the npcx BIN image. Moreover, this also changes the name of
npcx output image by CONFIG_KERNEL_BIN_NAME.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Create the pinmux phandle to the ADC driver node in the
devicetree. When the pinmux_pin_set function in
adc_it8xxx2_channel_setup can refer to the setting of
this phandle. It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
* MCUboot was build only for frdm_k64f in zephyr CI.
Extended Zephyr-RTOS integration platform by nrf52840dk_nrf52840
and nrf52840dongle_nrf52840 which allow to build MCUBoot on
these platform in Zephyr-RTOS CI.
* Added AES256 support for image encryption
* zephyr: serial: Remove unnecessary call to irq_unlock
* boot_serial: Port encoding to use cddl-gen
* bootutil_public: Make boot_read_swap_state declaration public
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
These headers were deprecated since release V2.5.0.
Users are expected to use dts based configuration API.
Remove these headers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Device management is more than just mcumgr, so put mcumgr under the
general section to allow for other tools and libraries to be documented
and added.
Moved DFU under the same section.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Distinguish between hardware debugging using probes and built-in debug
features such as tracing, post mortem analysis and thread debugging
using thread analyzer.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the build and configuration systems under one chapter and reorg the
application developer guide to reflect that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit extends the capabilities of the nRF IEEE 802.15.4 radio
driver with IEEE802154_HW_TX_SEC capability.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
We now get toolchain from cmake and can operate even if the toolchain
variant is not set in the envrionment, this test was verifying the old
behavior, so remove. There is not much twister related here to test and
the environment is not setup correctly to run all of this cmake code. We
are testing twister after all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow the user to disable VT100 commands to have a plain shell
without terminal emulation in order to avoid a lot of garbage
ASCII characters in shell output.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Change default partition table to allow for application which need
storage. One use case is running the OpenThread integration which has
a dependency on this.
Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>
Make the APIC_TIMER_IRQ_PRIORITY Kconfig depend on APIC_TIMER ||
APIC_TSC_DEADLINE_TIMER to hide it in menuconfig when not applicable.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Most arch's CMakeLists.txt contain rules to add compiler and linker
flags for coverage if CONFIG_COVERAGE is enabled, but 4 of them were
missing this.
Instead, set the coverage flags in arch/common/CMakeLists.txt which
affects all archs.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Essential type of RHS operand (64 bit) is wider than essential
type of composite expression in LHS operand (32 bit).
LHS entry_val is 32 bit, and RHS (phys+offset) is 64 bit.
Cast RHS composite expression to the (pentry_t) type.
Found as a coding guideline violation (MISRA R10.7) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
NPCX7 variants allocate code RAM either at 0x10070000 or 0x10090000.
The MPU requires addresses and region sizes to be aligned, so the
generic cortex_m/arm_mpu_regions.c results in an ineffective setup with
the addresses above.
This adds a custom mpu_regions setup for the npcx7, which covers both
available sizes, resulting in these two possible setups:
- 192kB devices
Code ram: 0x10090000 to 0x100bffff
MPU region: 0x10080000 to 0x100bffff (256k)
- 320kB devices
Code ram: 0x10070000 to 0x100bffff
MPU region 0: 0x10040000 to 0x1007ffff (256k)
MPU region 1: 0x10080000 to 0x100bffff (256k)
In both cases MPU data RAM setting is from 0x200c0000 to 0x200cffff,
matching the generic Cortex-m setup.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This aligns provisioner and provisionee APIs in terms of endianess
of public key provided by an application.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit allows an unprovisioned device to exchange its public key
using out-of-band techology (see MeshPRFv1.0.1, table 5.19 and section
5.4.2.3).
For in-band public key exchange, the mesh stack uses HCI commands to
generate public and private keys, and DH key. This, however, doesn't
work for OOB public key exchange since there is no command to generate
DH key with a private key provided by an application. Therefore, this
commit adds direct usage of TinyCrypto into the mesh stack for DH key
generation for OOB public key support.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Moving the key check after checking that no pairing or encryption
procedure is started fixes a race condition that is seen in some PTS
tests:
GATT/CL/GAR/BI-04-C
GATT/CL/GAR/BI-16-C
GATT/CL/GAR/BI-21-C
GATT/CL/GAW/BI-05-C
GATT/CL/GAW/BI-12-C
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add GPIO_flag values for GPIO DTS creation that
allows for pins that do not use the default
voltage. IT8xxx2 supports setting voltage
levels for each pin. The default for this SoC
is 3P3 but they can be set individually to
1P8.
This will be used, for example:
i2c_c_scl {
gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
enum-name = "GPIO_I2C_C_SCL";
label = "I2C_C_SCL";
};
Signed-off-by: Denis Brockus <dbrockus@google.com>
This commit provides implementations for the reset cause
API functions as part of hwinfo.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This commit enables DAC sample application to build and run on
stm32f3_disco platform. Updated documentation.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables dac_loopback to build and run on stm32f3_disco
platform.
This has been tested with twister and also as a standalone
dac_loopback test and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables test_dac to build and run on stm32f3_disco
platform.
This has been tested with twister and also as a standalone test_dac
test and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit adds DAC1 support in dtsi for stm32f3 series. Some
stm32f3 series has DAC2 so adding the same where applicable.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Remove useless definiton STM32F7X_SECTOR_MASK and use CMSIS instead.
By the way fix bug as '|' should be in fact '&',
but thanks to '~' inversion, '|' is now good.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Treat all test_file_* files the same and just explicitly set the header
in the final test_file.txt. This makes the logic the same regardless of
what paths tests are coming from.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the local option (-l) was specified we were ignoring the results
of what_changed.py and always setting a "FULL" build. Only explicitly
set a FULL run if we are building for a commit to the tree (local and
PR builds should respect the output of what_changed.py).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we use 'main' now, rename the example comment usage to use
that branch name instead of 'master'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sample doesn't do anything interesting and we have
tests/drivers/entropy to can show how to call the API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch removes duplicated label RISCVv32/64 and replace into
RISCV that has already used in GitHub.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Copy back the TX buffer content back into the upper layer
in case of a TX failure.
This is necessary in when frame encryption by the radio driver
is used. The shim layer for the nRF5 driver has a buffer, that
is used by the driver to authenticate and encrypt the frame
in-place. In case of a TX failure, the buffer contents
are propagated back to the upper layer. The upper layer
must use the same secured frame for retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The ieee802154_frame_retry will be set by the OpenThread integration
layer in the event of frame retransmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Use the nrf_802154_retransmit_csma_ca_raw and
nrf_802154_retransmit_at_raw API to retry the frame transmission
after a failed attempt.
The retry must be performed only in response to
a nrf_802154_transmit_failed event.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The ieee802154_frame_retry flag indicates that a transmission
retry is being performed. This flag may be used by the upper layer
to instruct the IEEE802.15.4 driver implementations to not perform
any modifications to the transmitted frame.
This flag should be used only in the event of a previously failed
transmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
During mpu init, we check MSA_frac bits[55:52] and MSA bits[51:48] of
the ID_AA64MMFR0_EL1 register. Currently we only allow 1F to pass the
check. But according to Armv8-R AArch64 manual [1], both 1F and 2F
indicates the processor supports MPU. This commit aims at fixing this.
[1]: https://developer.arm.com/documentation/ddi0600/latest/
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Some centrals deal poorly with receiving a security request immediately
after reconnection whenever reconnecting with characteristics that are
notifiable or indicatable and requiring security. In particular,
Android 9 and earlier devices may lose bond information when this
happens, some Microsoft Surface devices will enter an invalid state
and, on top of that, Apple's Bluetooth Low Energy guidelines explicitly
discourage this behavior.
In order to allow interoperability with those devices, make the GATT
automatic security request sending as a peripheral optional by
introducing a new Kconfig option, BT_GATT_AUTO_SEC_REQ.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The README.rst in `samples/tfm_integration/tfm_ipc` was incorrectly
referring to `psa_level_1`. README.rst has been updated to refer to
`tfm_ipc` example.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
The example in folder `samples/tfm_integration/psa_level_1` contains
code that demonstrate usage of PSA crypto APIs in Zephyr rather than the
PSA levels. Therefore renaming the sample as `psa_crypto`.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
This commit extends the psa_level_1 sample's use of the PSA
Cryptography 1.0 API to demonstrate the following functionality:
- Generate a persistent key (secp256r1)
- Display the public key based on the private key above
- Calculates the SHA256 hash of a payload
- Signs the hash with the persistent key
- Verifies the signature using the public key
- Destroys the key
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
There are a number of platforms that the x_nucleo_eeprma2 eeprom sample
can't build on. Also fix issue with missing include of <mem.h> header
to get DT_SIZE_* macros used by the overlay.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull request https://github.com/zephyrproject-rtos/zephyr/pull/24873
marked all the struct devices const.
However, the linker scripts were never updated to actually allocate
the struct devices in ROM. They're still in RAM, so the main benefit
of this work has not been realized.
Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that we've split out the build_all test there are a few left
over files that aren't needed any more.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The clock control & general driver build tests as they don't get
us any additional coverage then from what we get from the build all
test of tests/kernel/common/kernel.common on all platforms.
Additionally, remove drivers.conf as the file isn't used in any tests.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Function 'nrf_802154_transmitted_timestamp_raw' is not serialized and
connot be used for multi-core devices yet.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The timings were too tight for TLS tests executing on nRF52840 with
hardware entropy source enabled. Increase the timings to make tests
pass.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the hal_nordic module revision, to have Doxygen doc
fixes that solves warnings about non-existing CHANGELOG.md file
and nrfx_atomic Doxygen group.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add Kconfig options that allow configuration of optional internal
load capacitors for the high-frequency (HFXO) and low-frequency
(LFXO) crystal oscillators in nRF5340.
Default settings used for the new options are those that have been
in effect so far, i.e. external load capacitors for HFXO and 6 pF
internal capacitance for LFXO.
This commit also adds missing SOC_ENABLE_LFXO option dependency on
!TRUSTED_EXECUTION_NONSECURE.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add the option to send logs to fs backend using new dictionary
formatting
This can result in much better use of filesystem space
Signed-off-by: Elliot Revell-Nash <elliot.revell-nash@wdtl.com>
When SMP enabled, the primary core calls arch_start_cpu to start
secondary cpus. There is an assertion checking the core mpid to make
sure it is called by primary core.
But the checking is bogus. After the first secondary core is brought
up, arm64_cpu_boot_params.mpid will be changed, which will fail the
assertion.
The current solution restores the arm64_cpu_boot_params.mpid.
However, using the arch_curr_cpu()->id == 0 as the assertion will be
better.
The _current_cpu->id will always fail assertion inside this macro
(__ASSERT_NO_MSG(!z_smp_cpu_mobile()), so I use arch_curr_cpu()->id
instead.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
This allows the current speed of the connection (100Mbps/10Mbps) and
if it is operating in half or full duplex to be queried
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The enc424j600 chipet has 1-byte commands to enable or disable
interrupts which an be used rather than the currently used 4-byte
commands to speed the process up by a factor of 4x
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Code snippet to demonstrate use of 'zephyr,user' binding
for gpio pin was missing a #define to easily get the code
compiling.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In unshared FP mode, only 1 thread can use FPU but kernel doesn't know
which one, so riscv arch would enable FPU of each thread.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In order to increase test coverage, this commit updates the libcxx test
to run with both full and nano variants of the newlib.
Note that C++ exception handling feature is only enabled for the newlib
full variant because the nano variant does not support C++ exception
handling.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use the full version of newlib (i.e. not nano) for libcxx testing since
some features (e.g. C++ exception handling) require the full version of
newlib.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit makes C++ exception handling feature depend on the full
version of newlib (i.e. `CONFIG_NEWLIB_LIBC_NANO=n`).
The `nano.specs`, which selects the nano variant of newlib, libstdc++,
and libsupc++, does not support C++ exception handling because its
lib*c++ is compiled with `-fno-exceptions`.
For more details, refer to the issue #35972.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `.eh_frame_hdr` and `.eh_frame` ROM sections, which contain read-
only C++ exception handling information, are currently specified in
`cplusplus-ram.ld`, and this can cause the linker output location
counter to take a ROM region address while in the RAM region.
This commit relocates these sections to `cplusplus-rom.ld` in order to
prevent the linker output location counter from getting corrupted.
For more details, refer to the issue #35972.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
As there are a lot of PCI IDs for various devices, identifying
the ADSP this way will be hard to maintain.
Implement a more generic device look-up using the PCI vendor and class
information to detect a compatible ADSP.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Porting code from mimxrt1050_evk to this board to enable use of the SD
card. Note that this board does not have the power pin connected to the
SD card and must use the no-1-8-v option for the USDHC driver as in
PR #34205 for the mm_swiftio.
Tested with samples/subsys/fs/fat_fs.
Signed-off-by: Jake Mercer <jake.mercer@civica.co.uk>
The flash write function casts a void * to flash_prg_t, which can be 2,
4 or 8 bytes long depending on the SoC. This can trigger a hard fault
exception if data is not aligned, such as when passing a constant string
from settings_save_one().
Copying the chunk of data to a temporary variable on the stack to avoid
the problem.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Commit 95b916d104 ("drivers: wifi: esp32: fix reconnect issue")
switched from thread created at runtime to statically defined thread.
The difference is mainly visible for simple applications that use
CONFIG_NET_CONFIG_AUTO_INIT=y, where networking setup code is executed
before main() and any statically defined threads. All ESP32 events are
just queued and never handled, so conditions enforced by
CONFIG_NET_CONFIG_NEED_IPV4=y are never met (e.g. Zephyr networking
layer is never informed about being connected).
Switch back to thread created at runtime, which starts at the moment
when k_thread_create() is invoked. This allows ESP32 event processing to
happen just after ESP32 WiFi driver gets initialized and before Zephyr
network auto initialization code (CONFIG_NET_CONFIG_AUTO_INIT=y).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit adds a closing parenthesis for soc model of stm32g050.
Resolves issue #36014
Signed-off-by: Bhavesh Bhojwani <bhaavesh.bhojwaani@gmail.com>
sample.drivers.eeprom.shield.x_nucleo_eeprma2 sample variant
should be run in CI bench only if shield is present on board.
Add a harness_config to specify the fixture check
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The idea of having default platforms is to prioritize running tests over
just building them. We do not have NSIM in CI and thus we are just
building for those platforms without running the tests, so, we spend
lots of time building on PRs which slows everything down. This is
already done in the daily builds.
We now have Qemu covering ARC. If we can get NSIM into CI, then we
should reconsider enabling some NSIM platforms.
Leaving hs_smp and _sem for coverage, we do not have other platforms
covering those.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The usage of -W may lead to the loss of the Sphinx build environment
even for small typos. Remove this option from the defaults but still
enable it on CI, where the fail-fast behavior given by -W is desired.
Fixes#36033
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify the the AT2x EEPROM instance initialization macro a bit by
converting it to use the new DT helper macros for SPI and GPIO.
This also saves a few bytes when only AT24 support is enabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fill the ACK timestamp field in nRF5 driver. This is required by
OpenThread for the proper CSL transmitter functioning.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The AUDIT_LOG partition cannot be used in TF-M builds
with the IPC mode (CONFIG_TFM_IPC=y); we have added a
relevant dependency for this. So we can cleanup the
CONFIG_TFM_PARTITION_AUDIT_LOG=n from the configuration
files of the samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add `hwinfo_get_reset_cause` and `hwinfo_clear_reset_cause` to retrieve
and to clear cause of system reset on supported platforms.
Different platforms can provide different causes of reset, however
there is a great deal of overlap. `enum reset_cause` can be expanded in
the future to support additional reasons, as additional platforms are
supported.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Both NPCX7/9 uses the IRQs at the end of the vector table, for example,
the IRQ 60 and 61 used for Multi-Input Wake-Up Unit (MIWU) devices by
default, and conflicts with ISR used for testing.
This CL changes TEST_NUM_IRQS (The value is changed from 46 to 44) to
move IRQ used for this test suite from 42 to 40 which is reserved in
both NPCX7 and NPCX9 series to resolve the issue.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Introduce the npcx9m6f_evb board driver. NPCX9M6F_EVB board is a
development platform to evaluate the Nuvoton NPCX9 series
microcontrollers. This board needs to be mated with part number
NPCX996F.
It also includes:
1. Add CONFIG_BOARD_NPCX9M6F_EVB definition for adc test suite.
2. Add npcx7m6f_evb.overlay file for gpio test suite.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the support for npcx9m3f and npcx9m6f chips in ecst.py
script which generates the NPCX firmware header.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Fixed mutli-IP DNS resolution as previously the same IP address was
used to populate all AI entries and added DNS_RESOLVER_AI_MAX_ENTRIES
config entry to define max number of IP addresses per DNS name to be
handled.
Signed-off-by: Ievgen Glinchuk <john.iceblink@gmail.com>
Propagate Download and Execute (DnX) entry warning.
Add missing handler for SUS warning power down ack.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This commit address Erratum E10395 and Errata Correction E16350
to ensure that public keys exchanged between Provisioner and
a device aren't identical.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Align name of bt_hci_cp_le_set_cl_cte_tx_params::ant_ids
to other direction finding related commands.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Unmask events related with CTE report for Direction Finding
working in connected mode.
The feature is enabled conditionally, depending on KConfig
configuration provided.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Kconfig option that will enable support for CTE reception
in connected mode. Thanks to that it will be possible to
conditionally enable or disable support of the feature and
decrease code size if the feature is not required.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of events: HCI_LE_Connection_IQ_Report and
HCI_LE_CTE_Request_Failed for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Connection_CTE_Response_Enable
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Receive_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
MCP4725 is an I2C dac that was added with PR #33481. This can now be
added to the bl5340_dvk device tree.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
Also, this eases readability.
The new API can be used any time all FP registers must be manually
saved and restored for an operation.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The existing test puts the same value into all FP registers, runs a
secure service which is then interrupted by a thread that clobbers the
registers.
This patch instead puts different values into each register to test
that each register is restored in the right order.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This kconfig option enables runtime configuration of UART
controllers. This allows application to call uart_configure()
to configure the UART controllers and calling uart_config_get()
to retrieve configuration. If this is disabled, UART controllers
rely on UART driver's initialization function to properly
configure the controller. The main use of this option is mainly
code size reduction.
Fixes#16231
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the bt_conn pointer from the VOCS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify vocs.c to use the bt_vocs struct instead of the
bt_vocs_server struct. This is done so that there is less
difference between the internal struct usage and the struct
type used in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added an API to the HCI header that can be used to retrieve
advertising handle information from a given advertising set.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Since the valid bit-depth of RAM_PDn registers are different, this CL
introduces a 'ram-pd-depth' property in 'nuvoton,npcx-pcc' node if the
application needs to turn off the partial ram blocks for better power
consumption.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Remove unneccesary limit of host to controller packets by the host ISO
buffers and host pending buffers with TX callback.
The host always allocates the buffer before taking the semaphore so this
is already handled by the size of the host buffer pool and the
functionality of the buffer pools to wait for buffers.
In addition the ACL max limit is using the wrong define, as
CONFIG_BT_CONN_TX_MAX is the maximum amount of callback contexts for
transmitting. So the host can have more pending packets than this value.
This is also inconsistent with how the host would handle the V1 reply.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This CL replaces macros for miwu multi-registers' offset with internal
inline functions. This CL also uses soc series definitions to
distinguish the layout of miwu multi-registers between different npcx
series.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
In this CL, instead of a constant value, we use the length of property
'pinctrl-0' of adc0 to indicate the number of ADC channels in different
npcx series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the soc drivers for npcx9 series. There are two soc part
numbers, npcx9m3f and npcx9m6f, are introduced. We also move soc family
configurations from /nuvoton_npcx/npcx7/Kconfig.soc to
nuvoton_npcx/Kconfig.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
In npcx9, the number of pinmux registers (DEVALTx) is more than 16. We
need to extend the "group" member in the struct npcx_ALT to configure
the pinmux settings in npcx9.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL moves power policy source file for all npcx series to common
folder. It also abstracts the sources for checking register structures
to common/registers.c to avoid the duplicated sources in the later npcx
series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This driver is for classic CAN, it makes use of CAN interface
in FIFO mode.
This driver support Standard ID as well as Extended ID.
Tested on H3ULCB, Ebisu platform, with external adapter and
in loopback mode.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Move filter match function to can_utils.h, so that it
can be reused for Renesas driver.
Preserve copyright from Karsten Koenig.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
This commit adds a simple application to demonstrate the zephyr
eeprom interface.
It uses an eeprom to keep track of the number reboots.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds st microelectronics x-nucleo-eeprma2 shield,
which has populated 6 different i2c and spi eeproms.
They are all compatible with the existing at24 and at25 drivers.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit implements the microphone input control service
(MICS) and client, The implementation supports and uses the
Audio Input Control Service (AICS) secondary service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
STM32WL series have an extra APB3 bus with the SUBGHZSPI device on it.
Add the relevant code to enable and disable that clock, and to obtain
the actual clock rate. This is enough to run the STM32 SPI driver
against it.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add ADC support for the STM32WL family, this seems to work following
most of the L0X code path.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This commit makes the flash test generic. The flast test will
look for storage partition in the soc-flash for testing.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Adds a new callback structure to `<gatt.h>` for receiving notifications
of ATT MTU updates. This callback is called regardless of whether the
MTU update was initiated locally or remotely.
Fixes#32035.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use IE variable of ieee802154 MAC frame instead of Thread specific
configuration call for configuring injection of vendor specific
data into enh ack.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
this has a number of advantages:
- allows to only create notifications for each client if there are no
messages already waiting to be send, in practice prioritizing the
memory for messages for answers, thus staying more "responsive".
- saves a fair bit of memory by eliminationg now redundant client_ctx
pointer per observer.
- fixes a potential subtle bug: previously, an observer reset would've
stopped the first observation found with a matching token, which
might've belonged to a differen client.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
This restructures the lwm2m_engine to use a non-blocking socket access
instead of the previously used blocking style, and eliminates any
socket-access from outside of the main work loop.
The main motivation behind this is an issue within nordics
nrf_modem_lib/modem-fw on nrf9160, that leads to socket send() calls to
block indefinitely when the shared memory used for
rpc-communication with the modem is already exhausted because of
incoming data.
This lead to the lwm2m_engine locking up on send calls when there is
also a large amount of incoming data.
This works around this issue, by only issuing send calls when poll
reports the socket to be ready for sending, and (more importantly) by
always receiving all buffered incoming data before sending anything.
There might still be a (perhaps academic) possibility where this
situation might be triggered, when the scheduler interrupts the lwm2m
thread in-between receiving and sending, but for now we have not yet
observed this.
Besides working around the aforementioned issue, this also simplifies
the way resends are handled as they are no longer send from the main
system-workqueue, and limits all interaction with the sockets to a
single thread.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Keys management API for IEEE 802.15.4 drivers was specific for Thread
protocol. With this change API is more generic and aligned with Thread
needs.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
a switch was converted to an if statement and still had a default,
something went really wrong here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With this change, we can put contents into rom_start section
by calling zephyr_linker_sources(ROM_START ...)
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Co-authored-by: Torsten Tejlmand Rasmussen
Change-Id: If1169423b013d3e4df52d91cdb2fbdddc3bace7b
If the transaction of write to read is divided into two transfers,
the second transfer will go to check bus busy and cause i2c reset.
This change adds flag to eliminate this situation.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add multi-instance support and make use of the stmemsc i2c/spi
read/write routine that has been introduced to simplify the ST
sensor drivers code.
Moreover, move spi-full-duplex property from Kconfig inside Device
Tree, so that each LIS2MDL instance can be configured selectively
in accordance to how it is used in h/w.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Zephyr has introduced secure random generator API after the TLS sockets
were implemented. Use this new API in TLS sockets implementation,
instead of implementing secure RNG with mbedTLS in the module itself.
This facilitates integration of the HW RNG accelerators with the TLS
sockets module.
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Create minimal configuration for the peripheral_hr. Which can
be used to build this sample for nRF52810 and nRF52811 targets.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
LiteX GPIOIn module provides possibility to change IRQ mode
and edge via CSRs. This commit adds support for that feature.
Signed-off-by: Robert Szczepanski <rszczepanski@internships.antmicro.com>
This adds missing option to disable IRQs.
Devicetree is modified to match previous commit with custom IRQ CSR
addresses.
Signed-off-by: Robert Szczepanski <rszczepanski@internships.antmicro.com>
This adds an option to set IRQ pending and IRQ enabled CSR adresses
in devicetree since these can be custom in LiteX.
Signed-off-by: Raptor Engineering Development Team <support@raptorengineering.com>
This commit adds support for GPIO interrupts in GPIO driver for Litex
SoC Builder.
Signed-off-by: Robert Szczepanski <rszczepanski@internships.antmicro.com>
The final else {} in the if...else if is missing required
comment (non-empty, ';' is not sufficient). This adds a comment
to comply with CG 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Current "switch" operator with one case replace with the "if"
operator, because every switch statement shall have at least
two case-clauses.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed.
Added a default labels to switch-clauses without them.
Added comments to the empty default cases.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Compilers and static code analyzers do not understand Zephyr's
syscall mechanism so they always complain about out of bound
array access inside the generated syscall header functions.
So add a flag for GCC to ignore this type of warning for these
functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
GCC 11 defaults to output DWARF version 5 which pyelftools cannot
currently parse. So keep output at version 4 for the time being.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When running with TFM Regression option set, but without
BL2 (MCUboot) we need to use the TF-M's NS binary, and not
the Zephyr application. This was selected properly for the
case with MCUboot boot already, but not when running the
regression tests without MCUboot.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed. Add a default case with break and comment
to avoid static analysis tool to raise a violation that there is no
default case.
Also, I think, in all cases above no need to use "break",
because they already are using "return".
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
An 'if' (expression) construct shall be followed by a compound
statement.
Add braces to improve readability and maintainability.
Found as a coding guideline violation (MISRA R15.6) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Function types shall be in prototype form with named parameters
Found as a coding guideline violation (MISRA R8.2) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Variable "level" in function z_vrfy_log_filter_set() has type unsigned.
But it is been checked if "level >=LOG_LEVEL_NONE" and
LOG_LEVEL_NONE is 0. It means check if unsigned is ">= 0" in Z_OOPS().
That is logically wrong, because unsigned is ">=0" by default.
Remove that check, to avoid static analysis tool raise
violation
Found as a coding guideline violation (MISRA R14.3) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
If radio driver supports transmission security we need an option
to disable transmission security which by default is done by OT stack
for Thread v1.2
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Simplify the the MCP320x instance initialization macro a bit by
converting it to use the new DT helper macros for SPI.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Simplify the LMP90xxx instance initialization macro a bit by converting
it to use the new DT helper macros for SPI and GPIO.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
commit d31ed3be04 enabled multiple
instances but when multiple instances are actually used the code does
not compile
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Most of the code for the three exception functions is identical so use
macros to make things easier to read.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use the context switch macro for z_arm_cortex_r_svc to be more clear
about the svc call being executed.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
On the STM32F429I-DISC1 PA2 is used for MEMS_INT2, which is driven low
by U3 by default. Connecting it to USART2 TX causes the MCU to try and
drive it high at the same time, causing excessive power consumption.
Dropping the usart2 node since the USART2 alternate pins are also used
for other things, and no other UARTs of the device has a pair of TX/RX
pins available on this reference board in its default configuration.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Arrange device-tree files of npcx7 series by following steps:
1. Move device-tree declarations of npcx family to npcx.dtsi.
2. Leave specific device declarations of npcx7 series to npcx7.dtsi.
3. Move chip series related mapping tables such as
npcx7-miwus-wui-map.dtsi and so on to npcx/npcx7 folder.
4. Move common device-tree declarations used in each npcx series to
npcx-miwus-wui-map.dtsi and so on to npcx folder.
Then, the npcx device-tree folders are arranged to:
dts/arm/nuvoton
|--npcx
| |--npcx7
| | |--npcx7-miwus-wui-map.dtsi
| | |--npcx7-alts-map.dtsi
| | |--.....
| |--npcx-miwus-wui-map.dtsi
| |--npcx-alts-map.dtsi
| |--.....
|
|--npcx.dtsi
|--npcx7.dtsi
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL replaces series-prefix "npcx7-" with family-"npcx-" for npcx dts
nodes such as 'espi-vws-map' and 'miwus-int-map'. Since we plan to
introduce the npcx9 and later series, adding a new node such as
npcx9-espi-vws-map for each series is more complicated and not
necessary.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Update release notes for 2.6, and the vulnerabilities page to mention
CVE-2021-3581. This CVE is under embargo until Sept 4, 2021.
Signed-off-by: David Brown <david.brown@linaro.org>
Mention the example application as a major enhancement and provide a
link to its repository.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update to the Zephyr build configuration CMake package documentation
with description on how a Zephyr build configuration CMake package can
be located outside a Zephyr workspace.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #35890
The current implementation of Zephyr build configuration CMake package
only allows the build configuration package to be placed inside a
Zephyr workspace.
This commit extends the usability by allowing users to locate the
Zephyr build configuration CMake package outside the Zephyr workspace
and then refer to the package using
`-DZephyrBuildConfiguration_ROOT=<path>`
`set(ZephyrBuildConfiguration_ROOT <path>)`
This allows users greater flexibility in their workspace layouts.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* Added a bullet about new storage subsystem feature
* Moved disk subsystem changes into disk section
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The tabulator handler creates a single structure if it is handling
dynamic commands. If the currently processed dynamic command has a
dynamic subcommand they both share the same structure.
As a result tabulation operation may result in undefined behaviour.
As a solution, a new structure was introduced to keep subcommand
information.
Fixes#35926.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fix incorrect and redundant use of ticker user id ULL_LOW
instead of ULL_HIGH when setting up a connection using a
mayfly to disable LLL context. Also, the LLL context pointer
is invalid, where node rx is passed instead of LLL context.
Use the ULL disabled callback when done event has not yet
been processed, or a direct connection setup in ULL_HIGH
context when ULL is already disabled (reference count is
zero) is sufficient.
Regression introduced in commit 30f260dfaa ("Bluetooth:
controller: Fix adv/scan context access post release").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The caller saved registers were restored both as caller saved and
callee saved registers, i.e. register 0-15 were restored into
both register 0-15 and 15-31.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Shell log backend depends on logging being enabled. Lack of this
dependency leads to compilation failure when logging is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
For some reason a few drivers were not converted to the new device PM
callback signature. The reason may be because the device PM part is
compiled only when CONFIG_PM_DEVICE=y, a condition not enabled in CI by
default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The data-sjw value was incorrectly written to the NBTP register when it
should be written to the DBTP register.
This fixes a regression introduced by
5e0ca9b41e.
Signed-off-by: Christoph Steiger <c.steiger@lemonage.de>
Updates the frdm_k64f board documentation to clarify that the J-Link
OpenSDA firmware version depends on the DAPLink bootloader version.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This board got forgotten when we migrated the older APIC_TIMER users.
Now the platform is SMP by default and the older driver refuses to
build.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
ACRN build and configuration is non-trivially complicated, and so far
integration documentation has been mostly missing, and users have had
to get by via copying from existing integration efforts with minor
changes, leading to repeated mistakes and persistent confusion. This
is an attempt to document the process from first principles, with an
eye toward informing integrators (not me!) who might come by later to
better automate things. Some of the content is going to look remedial
to someone already familiar with e.g. ACRN configuration or EFI boot.
This simply replaces the pre-existing docs, which were for earlier
versions of ACRN where Zephyr was launched from the service OS instead
of the now-standard pre-launch VM mode.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
SMP is working now, make a 2-cpu configuration default for this
device.
Note that this requires changes to the default ACRN build
configuration! In hybrid.xml, you need to specify multiple physical
CPUs for the VM to uses, e.g.:
<vm id="0">
...
<cpu_affinity>
<pcpu_id>0</pcpu_id>
<pcpu_id>1</pcpu_id>
</cpu_affinity>
</vm>
Failing to build with this change will result in the system hanging at
boot trying to start up a CPU that won't run.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The ACRN hypervisor uses 0, 2, 4, 6 as its local APIC IDs for
virtualized CPUs and not the 0, 1, 2, 3 defaults we have.
(I hate this feature, having to manually (!) probe and code these
things in C isn't scaling. Zephyr needs to do the probing on its own
somehow, even if it's an offline tool in Linux or something.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The 16 bit bootstrap code for SMP CPUs was using the 286-era "lmsw"
instruction (load machine status word) to set the protected bit in CR0
(which is the modern evolution of the same register), presumably
because this is 16 bit code and we can't move a dword into CR0.
But that's wrong, because the full instruction set *is* available in
real mode on a 386, you just have to use a operand size prefix to get
to it, which the assembler emits for you automatically when you use
the .code16 directive.
Write this conventionally and use modern (e.g. 1986-era) instructions.
It also has the advantage of not confusing much more modern
hypervisors like ACRN by issuing instructions they (and I!) never knew
existed.
Fixes#35076
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Because of a historical misunderstanding, by default the ACRN
hypervisor wants to load Zephyr at address 0x1000 and enter the binary
at that same address. This entry point corresponds to the __start
symbol of the build they were given, which is a 1-cpu non-SMP
configuration. Unfortunately, when we build with
CONFIG_MP_NUM_CPUS=1, the code in locore.S #if's out the 16 bit entry
point for the auxiliary CPUs at the start of the section. So in the
build ACRN received, the start address happened to be 0x7000, the same
address we need to launch the AP processors from.
That's right: under ACRN, the SAME ADDRESS used to enter the OS in 32
bit mode needs to be used later to boot CPUs running in 16 bit real
mode!
The solution, such as it is, is to put a 32 bit jump at the entry
address which hops to the 32 bit OS entry code, and then scribble NOP
instructions over that jump once we get there so that the next time we
reach that address (in real mode) we fall through to the correct
entry.
This patch should be considered a temporary workaround. While it
works on all x86 hardware, it's not really needed. A much better
solution would be to eliminate the locore linker region entirely
(which causes other headaches) and enter the Zephyr binary in a 32 bit
address somewhere in the contiguous high memory area. All that locore
is needed for is the 16 bit bootstrap code for SMP processors, which
is ~6 instructions and can be copied in from the kernel at runtime.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The final else {} in the if...else if is missing required
comment (non-empty, ';' is not sufficient). This adds a comment
to comply with CG 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The final else {} in the if...else if is missing required
comment (non-empty, ';' is not sufficient). This adds a comment
to comply with CG 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The NXP I2S driver queues 2 receive buffers to avoid receive overflows.
Allocate an extra block so we do not see test failures due to allocate
failures
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The lis2mdl temperature samples work with a level of 25 Celsius.
When temperature goes below that level the samples become negative
and there was an issue in properly propagating the sign.
Fix#35910
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The lps22hh 24 bit raw sample is left aligned, which means that
it needs to be right-shifted by 8 before applying conversion.
Moreover the conversion has been simplified for clarity.
Fix#35871
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fixes: #19582
When `find_package(Zephyr)` completes then all boilerplate code has been
processed and all Zephyr libraries has been placed inside the
whole archive flags.
Also all libs dependencies has been processed.
This is indicated by the presence of the zephyr_prebuilt target.
Thus, warn the user if `zephyr_library()` / `zephyr_library_named()`
is called in app-mode.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Changed location of the last k_mutex_unlock trace hook since it was
being called after k_sched_unlock, which could result in tracing
scenarios (other thread waiting for lock) where it appeared that a
mutex was being locked again before becoming unlocked.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Introduce a table with the minimum version required for the three main
dependencies (CMake, Python and DTC). At the same time remove the CMake
help code from the GSG, since it's just a duplicate of the instructions
that Kitware provides.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Co-authored-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
Fix CCC store on write feature for multiple connections. CCCs are only
enqueued for storing when going from no connections subscribed to any
connection subscribed.
The CCC should be stored when its value is changed for the specific
connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
* Removed ARCH POSIX, driver/pinmux, updatehub, settings, random, POSIX
subsystem, and LGVL sections as no significant changes this release
* Add new drivers for eeprom, timer and watchdog sections
* Added bullet item about shared interrupt support being devicetree
based
* Added bullet about moving of CMSIS portability headers
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since Zephyr docs switched to fixed-width, the binding pages are not
displayed correctly. We should move to another data representation
format that works better for fixed-width documents. Until this decision
is made, add a workaround that forces the template to expand page width
to the maximum on binding pages.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Let's Encrypt X3 certificate is no longer in use, replace it with an
up-to-date certificate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use gpio_dt_spec structure and related macros for both drdy
and AnyMotion interrupts, to have a more compat, readable and
safe code. Moreover, skip setting DRDY or AnyMotion trigger
from application if the corresponding irq-gpios has not been set.
(This commit also fixes#34794)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit increases the newlib heap size to 2048, which is the
recommended minimum required to ensure proper operation of the newlib
nano used by test (see #35799).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit increases the heap size for the newlib nano test to 2048,
which is the recommended minimum required to ensure proper operation
(see #35799).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new `CONFIG_NEWLIB_MIN_REQUIRED_HEAP_SIZE` config
that allows user to specify the minimum required heap size for the
newlib heap, and makes `malloc_prepare` validate that the memory space
available for the newlib heap is greater than this value.
The default minimum required heap size values were empiricially
determined, so as to allow the basic standard C functions such as
`printf` and `scanf` to work properly.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Short update to list of changes to MCUmgr that impact Zephyr.
Note to Shell on changes that affect mcumgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The ehl_crb board has hardware issue that prevents this test from
being able to pass this otherwise-correct test. So exclude ehl_crb
from the testcase.yaml.
Fixes#33544.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Update documentation for H3ULCB board following the
addition of new features during v2.6 windows.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Two code-blocks were not correctly rendered, due to missing
empty lines before them. This commit fixes this.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
* Add high level bullets about tracing & power mgmt
* Removed duplicated bluetooth section
* Remvoed RISC-V section, to changes of note for this release
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Recent rework in logging api brings complicated macros which can
overhelm Eclipse CDT parser.
This workaround disables expansion of LOG_xxx macros in Eclipse.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Add to the v2.6 release note all Renesas R-Car drivers
that have been merged during this period.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Commit f5c6afeccb attempted to avoid
accessing lpc55xxx flash registers in nonsecure mode by conditionalizing
part of the SoC clock initialization routine on whether the flash driver
was enabled. This caused secure applications without the flash driver
enabled (e.g., hello_world on lpcxpresso55s69_cpu0) to not boot or show
any console output. Fix this by changing the condition to depend on
whether we are building a nonsecure image.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove minnowboard configuration which is very basic and can be brought
back by just taking another X86 configuration. We have not tested this
board for a while and it is not being used actively, so remove it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board was added to test coverage feature when coverage was
introduced. This is now being testing with other boards and
configurations on a regular basis, so no need for this extra overhead in
CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix Extended Advertising PDU population from incorrectly
populating new PDU when there is no common extended header
flags being set in the previous PDU and or the new PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising PDU population from incorrectly
populating new PDU when there is no common extended header
flags being set in the previous PDU and or the new PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated advx test to verify previous sync data when no
extended header flags are set in the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising data population from corrupting
the PDU by populating fields when there is no flags in the
common extended advertising header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated advx test to verify sync data when no extended
header flags are set in the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a status check for the BIG sync established and
BIG sync created events such that we don't log a warning
of invalid BIS count when it is an error event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently the MBEDTLS_HAVE_TIME_DATE mbedTLS option is enabled based on
the CONFIG_POSIX_API option. This doesn't seem right, since the enabling
the POSIX API does not guarantee that there is a valid time source in
the system. This was the case for the qemu_x86 platform, where enabling
POSIX_API caused TLS handshake failures due to certificate validation
errors caused by no valid time avaialble in the system.
Fix this by adding a specific KConfig entry for date/time configuration
in mbedTLS. Applications that need to enforce date verification in
mbedTLS should enable it explicitly instead of relying on the
non-obvious implicit configuration.
Fixes#35401
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the supplied sjw in the timing parameters is zero,
the sjw parameter should not be changed.
This fixes the uninitialized swj in can_set_bitrate.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Fix the compilation of board.c when the DAPlink QSPI MUX devicetree
node is enabled.
Fixes: 3632815e2e
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fix the compilation of i2c_gpio.c after the gpio_config() syscall was
removed.
Fixes: 3632815e2e
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Just the extensions changes for Zephyr 2.6, since west has its own
release notes page as it's developed on its own pace.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix a regression for cleaning up BIGs added by
80c824f18e where the way
ISO connections were unref'ed was changed.
bt_iso_cleanup has been changed to only effect CIS
(as the unref from that has been removed), so instead
of calling bt_iso_cleanup we just call
bt_conn_unref directly.
This also removes some unref's from the BIG complete
and BIG Sync complete event handlers as the BIS bt_conns as
they don't increase the ref counter before anymore.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BT_L2CAP_LE_ERR_INVALID_PARAMS shall be returned instead of
BT_L2CAP_LE_ERR_UNACCEPT_PARAMS.
This was affecting test case L2CAP/ECFC/BV-26-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
For more than one requested channels in le_ecred_conn_req only result is
overwritten in every iteration. This causes an issues if after failed
l2cap_chan_accept occures successful one: returned result will be
BT_L2CAP_LE_SUCCESS, where in reality should be returned error
and non-zero Destination CIDs will signal "Some connections refused".
Now, overwrite error only if the last one failed. If no errors occur,
result will remain BT_L2CAP_LE_SUCCESS.
This was affecting test cases L2CAP/ECFC/BV-20-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix missing 0x0000 CIDs in response for ecred_conn_req. Previously,
when one of "All connections refused" error i variable was set to 0,
thus no CIDs were copied to response.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The workflow was pointing to `master` instead of `main`, which
prevented it from running after the branch was renamed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move to using port property for a few cases in which we need to know
which specific hardware port a device is for. This allows us to
remove the PORT0/1 Kconfig options. This also fixes the issue that
assumed pio0 would map to DT_INST(0) and pio1 would map to DT_INST(1)
Fixes#35693
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a port property to describe which hardware port a GPIO device node
is describing since we can't tell from the registers (as the registers
are interleaved in the same MMIO space).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Check correctness of returned sync_handle value while requesting
HCI_LE_Set_Connectionless_IQ_Sampling_Enable in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix bug of missing sync_handle parameter in return data in
HCI_LE_Set_Connectionless_IQ_Sampling_Enable commnad
handling function.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix peripheral sample handling of string values. The read callback
uses strlen to get the length of the current string value. Make sure
that the string value is always zero-byte terminated.
Fix multiple characteristics using the same storage for its value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Log failure to initiatet security for bonded peer when GATT wants to
initiate security for CCCs for the remote.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Notify application about prepare write error when continueing the write
procedure fails when RX thread is processing responses. It is possible
that this operation fails, either because of disconnection or ATT
timeout on the ATT bearer. Notify the application in case it needs to
clear up resources, e.g. the write parameters.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We now have function properties which can replace the confusing message
in the doxygen docs.
Fixes#10499
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When a device is defined a new pointer to a device will be created in
the "z_pm_device_slots" region, effectively creating a device array with
the same size as the number of system devices. This array is then used
by the device PM subsystem to keep track of suspended devices during
power transitions.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The NIOS2 architecture linker script was including `cplusplus-ram.ld`
linker script after `__data_ram_end`, and this caused the content of
`.gcc_except_table` section to be not copied to the RAM by the
`z_data_copy` function; leading to the C++ exception handling
malfunction.
This commit relocates the `cplusplus-ram.ld` linker script inclusion
such that the contents of the relevant sections are properly copied by
the `z_data_copy` function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
On the Cortex M0+, M0, M23 the div-by-zero is not mapped
as an hardware exception but triggers a HardFault.
The test case is skipped for any ARMV6_M_ARMV8_M_BASELINE.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The time() function works correctly with the minimal libc, but always
returns -1 with the newlib libc. This is due to the _gettimeofday hook
being implemented that way.
Fix that by calling gettimeofday in the _gettimeofday hook instead of
returning -1.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
1.Added or refined some testcases, most of them are neagtive tests, to
improve the test code coverage.
2.Provide test excution time per ztest testcase.
3.Add a feature which handles pytest script in twister and provide an
example.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
On macOS there exists an alternative install method for gnuarmemb.
Unfortunately this information was located with the Intel oneApi
toolchain description and not the GNU arm Embedded toolchain.
Move the description to its correct location.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Result to send was overwritten by BT_L2CAP_RECONF_SUCCESS just after
exiting while loop. This caused to send success response even if
reconfiguration failed. Now, result is initialized to success value,
and if reconfiguration fails, this value will be overwritten with
appropriate one. Added BT_L2CAP_RECONF_INVALID_CID (0x0003) for invalid
cid in request. Added BT_L2CAP_RECONF_OTHER_UNACCEPT (0x0004) to return
if MPS is to small. Reordered checks for mps/mtu as
BT_L2CAP_RECONF_OTHER_UNACCEPT is expected to be returned if both mps
and mtu are to small.
This was affecting L2CAP/ECFC/BI-05-C and L2CAP/ECFC/BI-05-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Now that we use 'main' for git development, update the docs to reflect
or point there instead of 'master'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Minor fix to the name for the arm_irq_vector_table
test suite, removing the 'interrupt' from the name.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a dependency on MULTITHREADING for the
STACK_SENTINEL feature, so it may not get
enabled in single-thread Zephyr builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The net_capture_is_enabled() function returns boolean value
so fix the function prototype.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_capture_pkt() does not return anything so remove the
return description from the function documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These functions are those that need be implemented by backing
store outside kernel. Promote them from z_* so these can be
included in documentation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These functions and data structures are those that need
to be implemented by eviction algorithm and application
outside kernel. Promote them from z_* so these can be
included in documentation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix up a handful of references to 'master' in the security documentation
to refer to the new 'main' branch.
Signed-off-by: David Brown <david.brown@linaro.org>
Currently zephyr has no means to control access to the uart
driver when it is inactive, e.g. shell is not aware of uart
being in idle state and calls asynchronous api. Add early
return to TX starting procedure if device is idle.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When we link in crtbegin.o for C++ exception support we end up pulling
in the .tm_clone_table section. We need to update the linker scripts
to handle this. soc/xtensa/sample_controller/linker.ld was already
updated, this fixes the others.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixing error introduced in 951e72b947
where ifdef was converted to IS_ENABLED. Ifdef was required because
element in the struct does not exist when multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This makes connections of type BT_CONN_TYPE_ISO use BT_CONN_CLEANUP to
cleanup so the TX and RX queues are properly cleanup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints information about the role and id along with connection
parameters in case the connection is of LE type.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The state shall be set before calling the callback as it could be check
code behind would expect the channel to be in connected state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When handling CIS Requested event CIG and CIS IDs must be set in order
for the channel to be properly accepted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes bt_conn_cleanup to be automatically called when the last
reference to a connection of BT_CONN_TYPE_ISO is dropped.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Path.rename() uses os.rename() internally. Per the Python docs:
The operation may fail on some Unix flavors if src and dst are on
different filesystems.
Since 'src_adjusted' is in a temporary directory, on my flavor of
Unix, that's in /tmp, which is indeed on a different filesystem than
'dst', a destination in the doc build directory on my root filesystem.
This is causing the following error when I build the docs:
Handler <function sync_contents at 0x7f9b8fca9c10> for event
'builder-inited' threw an exception (exception: [Errno 18] Invalid
cross-device link: '/tmp/tmpfscfo20o/index.rst' ->
'/home/mbolivar/zp/zephyr/doc/_build/src/reference/drivers/index.rst')
Fix this by using shutil.move() instead of Path.rename(). The shutil
function handles cross-filesystem moves correctly. It did not take a
path-like object for both its src and dst arguments until Python 3.9,
though, so we need to convert to strings for portability on earlier
but still supported versions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
I'm getting the following error on doxygen 1.9.1:
.../zephyr/doc/custom-doxygen/mainpage.md:1:
error: multiple use of section label 'index' for main page,
(first occurrence:
.../zephyr/doc/custom-doxygen/mainpage.md, line 1)
(warning treated as error, aborting now)
Extension error (zephyr.doxyrunner):
Handler <function doxygen_build at 0x7f1abf9e30d0>
for event 'builder-inited' threw an exception
(exception: Doxygen process returned non-zero (1))
This fixes it for me without breaking anything in
_build/doxygen/html/index.html that I can see.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
From Doxygen 1.9.1 when running 'make htmldocs':
warning: Tag 'COLS_IN_ALPHA_INDEX' at line 1028 of file
'/tmp/tmpkbj62jo0' has become obsolete.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit allows to add callbacks to NET_EVENT_IF_UP events before
the network initialization.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit implements the SPARC V8 ABI "Flush windows" software trap.
It enables support for C++ exceptions and longjmp().
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This associates the SHELL UART backend with the DTS uart0. It solves
an issue with unresponsive shell.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Coverity does not understand syscall mechanism and will already
complain when any function argument is not of exact size as
uintptr_t. So tell Coverity to ignore this particular rule here.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Set `ROM_START_OFFSET` for SAMD5X series to match the value
calculated in the linker file after forced alignments in
`vector_table.ld`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This k_usleep(1) is a tick alignment, not a workaround. Simple
reword to avoid confusion.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Following master branch renaming to "main", update this script
to use $remote/main as base comparison branch
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit it to resolve following bugs:
* Operands don't affect result.
* Logical dead code in stm32_adc driver.
Above mentioned bugs were solved by adding parenthesis and
changed the method of comparing. Since comparison of ADC
channel_id with the channel may cause loss of value.
So instead of direct comparison, introduced a mechanism to
convert channel constant to a decimal using
__LL_ADC_CHANNEL_TO_DECIMAL_NB() and strips away
the INTERNAL_CH bit and then compare with channel_id.
fix:
* zephyrproject-rtos/zephyr#35130
* zephyrproject-rtos/zephyr#35136
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
Fixed several compilation errors that resulted from selecting
TRACING without specifying a tracing system (Tracerecorder,
CTF, Systemview). In this case (TRACING_NONE), some default trace hooks
(in tracing.h) were incorrectly named resulting in compilation errors.
The legacy sys_trace_isr_enter, sys_trace_isr_exit, and sys_trace_idle
also caused problems since these were only given as defines, resulting
in undefined reference errors since they are required by the assembly
files calling these. To solve this issue I've added a stub file
"tracing_none.c" (only compiled if TRACING_NONE) and declared the
functions in tracing.h if no tracing system is selected.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
This commit makes CONFIG_EXCEPTIONS un-selectable for the architectures
that are known to have broken C++ exception handling support
(see #32448).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the filter for cpp.libcxx.exceptions test to allow
testing on all architectures except the ones that are known to be
broken (see #32448).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The `CONFIG_LINKER_SORT_BY_ALIGNMENT` config, which is enabled by
default, causes the sections containing C++ exception handling
information to be re-ordered for certain targets (in particular, the
64-bit arch targets). This effectively breaks the required "crtbegin.o
-> others -> crtend.o" order and causes the address of the
__EH_FRAME_BEGIN__ symbol to be invalid; thereby, causing C++
exception unwinding to fail.
This commit adds SORT_NONE property to these sections in order to
ensure that the linking order specified in the linker command line is
maintained.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It was just making the code hard to read. Also it was not following
the code guideline because the type was not telling us the sign
and size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
z_pm_core_devices was hack to set some priority between devices. It
was doing it hardcoding some devices that were the first to bring up
and the last to power down. Remove it and use the same list used to
initialize devices.
Fixes#34214
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
OpenThread expects the FCS field at the end of the ACK frame to be
passed with `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Zephyr kernel masks interrupts before calling the SoC PM
sleep entry point. On the Cortex-Mx family this prevents
wake from peripheral interrupts. The SoC PM layer requires
interrupts to wake the SoC and must prevent the CPU from
vectoring to an interrup until PM exit. The SoC does this
by setting ARM NVIC PRIMASK to 1 and BASEPRI to 0. On
return to the kernel SoC sets PRIMASK to 0 allowing ISR's
to fire. In addition the MEC HW only clears its peripheral
sleep enables if the CPU vectors to an ISR. On wake we
clear the MEC PCR sleep control register which clears all
the peripheral sleep enables so peripherals will be active
before exiting the SoC PM layer.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
A few language fixes to the "Installing the documentation
processors" section.
Also adding comments to be able to include this section in
other locations.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
A few language fixes to the install dependencies section.
Also adding IDs to be able to link directly.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
In a primitive SYS_SLIST_FOR_EACH_NODE check for null was
after dereferencing. Place check for null of the "thread_spec_data"
before its dereferencing.
Found as a coding guideline violation (MISRA R4.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Not checking return code in fcntl can result in interpreting -1 as
flags, and cause unexpected behaviour.
Fixes#35541
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add a tree node to group files under WORKSPACE so that
they won't be shown with full path. The WORKSPACE is
usually the same as WEST_TOPDIR unless ZEPHYR_WORKSPACE
is defined during build.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The list of symbols only contain visible symbols that can be
obtained through ELF file. There are code and data where
the toolchain never emits symbols for them and thus are not
visible in the list. So add a "(hidden)" node to the tree
to show they are there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes how the tree is generated. Symbols with no paths
are now grouped together instead of scattering throughout
the tree. If paths in ELF file are not all under ZEPHYR_BASE,
it will create additional node groups as 2nd level. This is
useful when not all source files are under ZEPHYR_BASE, and
provides a better indications of where they are.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes how paths are stored in intermediate structures
so that full paths are stored. This makes it more consistent
with those structures to avoid an issue where some paths are
full paths, some are relateive to ZEPHYR_BASE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some common C++ file extensions so the script
can recognize those as source file, and display them in
different color.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This fixes the issues on import statements identified by pylint.
Also add docstrings for method and classes. Most of them are
already there as comments, so simply move them as docstrings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Device won't reconnect automatically even if
AP station is available. This fix adds the carrier event, indicating
that network is present again enabling DHCP bound event.
Also, internal wifi event callback was added into wifi
driver to enable proper event handling.
Update west.yml to bring exposed wifi event callback.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#33843
Increasing ZTEST_STACKSIZE to 4096.
This ensures that the riscv32 platforms can succesfully execute the
C++ exception test cases.
Also add the following platforms to allow list:
- qemu_arc_em
- qemu_arc_hs
- qemu_cortex_m0
- qemu_cortex_m3
- qemu_cortex_r5
- qemu_riscv32
- qemu_x86
- qemu_xtensa
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes part of: #32448
This commit updates the CMake CMAKE_CXX_LINK_EXECUTABLE to include
crtbegin.o and crtend.o at the right locations when linking with gcc.
It also updates linker scripts to ensure proper location of the
exception header frame sections.
This ensure proper handling of exceptions for those architectures
- x86
- xtensa
- riscv32
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* Remove driver categories that didn't have any major updates
* Add a first pass on new drivers that got added
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was a verification function for can_set_bitrate calling a syscall
implementation. But, can_set_bitrate is not a syscall and does not need
to be because it is accessing the driver through other syscalls.
Fixes#34734
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
RTT_LOCK/UNLOCK in certain configuration creates code block (curly
braces). In that case variables declared inside are local to that
block. Moved declaration of ret variable before the block. Updated
code to ensure that RTT_LOCK/UNLOCK are in the same code block.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The current iso commands in the shell only supports setting up
a bidirectional stream or unidirectional for central role.
Adding rx/tx/rxtx option to iso listen command to allow for
peripheral side configuration of an iso connection.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
The sequence number is needed in the appliaction layer to detect lost
packets in the ISO stream in cases where the timestamp is not included.
(Sequence number is mandatory to include where timestamp is optional).
The API for the public metadata have been moved to a public header file.
As the size of the ISO meta data exceeds the default 4 octets net_buf
user_data the public ISO metadata have been moved into a seperate array.
The internal metadata is still stored in net_buf user_data.
This also fixed the user_data overflow on 32 bit systems, caused by
writing the ts into user_data on index 4 to 7, which is outside the 4
allocated bytes.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
For the native posix build the sleep calls used in tasks will stall
the zephyr instance which sets an upper limit on the data processing
interval to once every 20-30 millisecond.
This change reduces the duration of the sleep calls and increases the
TICKS_PER_SECOND to allow for shorter sleeps. This is needed to
support the data rates needed for LE Audio streaming. The rate is
tuned to support up to bidirectional 5ms ISO-intervals.
This change also increases the ISO buffer count from 1 to 5 to
allow for some buffering in the controller, which is needed for
gapless playback and/or use of burst number larger than 1.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Microchip HAL 1.2.0 fixed a bug in the define of GPIO
control register MUX field. The incorrect MUX defined
cleared by GPIO input pad disable field by accident.
After the MUX definition was corrected the pinmux driver
must be modified to mask off the input pad disable for
the pin to be operational.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add list of new SoCs and ARM boards added in this release. (Folded the
STM32 board section into the ARM board section).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update overlay file for nucleo_l552ze_q_ns board,
since now the sample does not enable REGRESSION,
and thus regular TF-M flash layout for the board
is used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The flash layout definition has changed in upstream TF-M for the
LCPXPRESSO55S69 platform, for builds without bootloader. Fix the
layout in the boards' configuration, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Removes the dependency on the external test service from the
CONFIG_TFM_REGRESSION_S test suite, instead
demonstrating how to make direct IPC calls to the CRYPTO
service that is available as a part of standard TF-M builds.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
The TF-M update brings in the latest PSA crypto headers,
after TF-M switched formally to MBedTLS 2.26.0. It also
brings in some important fixes for cache enabling in nRF
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the ARM/ARM64 split the SDK 0.12.4 is needed to be able to compile
the ARM64 arch code. Bail out if an old SDK is detected at compile time.
Also change the minimal supported Zephyr SDK to v0.12, as agreed in
Toolchain WG. Main reason is added compiler architectures and important
inclusion of fixes, for example qemu and arm fixes for veneers (TFM)
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Remove (disabled) MPU support for the NXP Kinetis K2x. At least the
MK22F51212, which is the only K2x supported by Zephyr so far, does not
contain an MPU.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Due to the fact that we use -mcpu=hs as a default for ARCv2 HS
the compiler doesn't generate multiply/divide/mac/64bit memory
operations instructions.
Fix that by using -mcpu=archs as a default for ARCv2 HS which is
fits for all existing boards with ARCv2 HS CPU.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Change the drivers's compatible from atmel,sam-tc to atmel,sam-tc-qdec.
The atmel,sam-tc should be reserved for the future counter driver.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The change removes the following warning:
Warning: /soc/tc@4000C000: simple-bus unit address format error,
expected "4000c000"
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Fixes calculation of remaining ticks returned from z_tick_sleep
so that it takes absolute timeouts into account.
Fixes#32506
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Some time ago we did a cleanup of sys_io function and left nios2 broken,
especially on the MAX10 board. Revert back to the original
implementation for this architecture.
Fixes#35694
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This compile test should be checking if a symbol has been defined,
otherwise it is using the kconfig value directly. This fixes a warning
../src/main.c:115:37: warning: "CONFIG_SOC_QEMU_ARC" is not defined,
evaluates to 0 [-Wundef]
when using the -Wundef flag.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Currently the Cortex-R platform has no one watching over it. Submitting
myself to help with the Cortex-R parts of the ARM architecture.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Updates board documentation for several NXP boards to reflect currently
supported features, NXP documentation links, clarifications on debug
probes, additional troubleshooting tips, and some minor editorial
changes.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Shrink the name of the hidden cortex-m option for the
null-pointer dereference detection feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Reduce the length of the Kconfig defines related to
null-pointed dereference detection in Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Change fixes a build warning related to attribute ignored in
declaration of struct. The __packed attribute is removed.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
If single thread builds are not supported by the
architecture, the MULTITHREADING option should be
prompt-less to block any modifications to it. We
also introduce an explicit ARCH-level Kconfig that
reflects whether the ARCH is capable of single-thread
Zephyr builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
People seem to miss the troubleshooting page a lot, since nobody ever
mentions that they tried its steps and they didn't work. Promote it to
a top level page to make it easier to see. Add cross-references
between the two to keep them well linked together.
Add a couple of extra links to the bindings related HOWTO while we are
here, now that the bindings docs are a bit better off than they were
when this content was originally written.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes: #32237
When building for native_posix, then host tools are used.
This means that gcc will link using `/usr/bin/ld` per default.
If ld points to lld, then linking will fail.
This commit will first look for ld.bfd, and if found then use
-fuse-ld=bfd for linking. If ld.bfd is not found, then ld is used as
fallback as that will be assumed to be the best working candidate.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
pm_device_runtime_state_set takes care of the check the reference count
and take the right action. It is not necessary check it in
pm_device_request.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Assuming that pm_device_state_set is synchronous it is possible to
simplify the mutex usage. Now there are two places where the lock is
held, one in the worqueue handler and other in pm_device_request to
cover the synchronous path. It is no longer needed held the lock in the
pm_device_state_set callback and not needed to wait on the conditional
variable after set the state in the synchronous path.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Most APIs have the default synchronous and an asynchronous version
with the sufix _async because that is the most common use.
All devices in tree right now are using the synchronous version, so
just change it to be consistent with the rest of the system.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- idle/runtime
- Information about asynchronous calls and how to use the condition
variable
- More details about usage count
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Uses tag "option" for CONFIG_PM_DEVICE_RUNTIME to make it
linkable. Just like is done for all others build options.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since we are using mutex to protect critical sections and mutexes are
reentrant, it is possible to get rid of atomic for the state because
we can lock the mutex in device_pm_callback.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Changing from spinlock to mutex makes the running thread be preempted
and the workqueue ran. This changed the prints order in this sample.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Protect critical sections using the mutex.
The mutex is required to use the conditional variable and since we
need to atomically check the pm state and the workqueue before wait
the condition, it is necessary to protect them using the same mutex.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Test two threads changing states concurrently
- Test multiple calls to get/put
- Test async / sync API
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Protect critical sessions using the spinlock available. The atomic
usage was not properly protecting the critical section and was
possible to have a race condition between the usage check and state
set.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a function that properly uses a mutex to check a condition before
wait on the conditional variable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix CONFIG_BT_EXT_ADV_LEGACY_SUPPORT option which optimizes the host
to skip checking the feature bit of the controller to check for
extended advertising commands.
This was broken because of how this was implented using an undef of the
feature bit, which was not replicated in scan.c, adv.c and id.c once
this was split out from hci_core.
Instead of doing this wierd way of redefining the feature check macro
do it in a proper way by defining a new macro.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Increase FLASH_PAGE_ERASE_MAX_TIME_US of cpunet to be the same as the
value of cpuapp; FLASH_PAGE_ERASE_MAX_TIME_US is the execution window
duration when doing the flash operation synchronously along the radio
operations (SOC_FLASH_NRF_PARTIAL_ERASE not enabled); the previous
FLASH_PAGE_ERASE_MAX_TIME_US value of cpunet is lower than required.
Signed-off-by: Lang Xie <lang.xie@nordicsemi.no>
Statement "cont = dropped_item != NULL" first checks if "dropped_item"
returns null or not null, then assigns to "cont".
If "dropped_item" is null then "cont = 0",
if "dropped_item" is not null then "cont = 1".
As a result in line below no need to check "dropped_item" again
It is enough to check state of the "cont" variable,
to be sure what returned "dropped_item".
Found as a coding guideline violation (MISRA R4.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
SECTION_FUNC allows only one function to reside in a sub-section
SECTION_SUBSEC_FUNC allows multiple functions to reside in a sub-section
we should use SECTION_SUBSEC_FUNC for _reset and _start
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
"arm64_cpu_boot_params.mpid" should be assigned to "master_core_mpid"
after secondary CPU core up.
Because "arm64_cpu_boot_params.mpid" is used to check the next up CPU
core's mpid is the excepted mpid. After excepted CPU core up, the
"arm64_cpu_boot_params.mpid" doesn't restore to primary CPU core's mpid
and then the primary CPU core try to up third CPU core will crash in
assertion.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
The commit adds information to Kconfig options:
MCUMGR_CMD_SHELL_MGMT and MCUMGR_BUF_SIZE
on how the SHELL_BACKEND_DUMMY_BUF_SIZE value impacts them.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds Kconfig option to configure dummy shell buffer size.
Size of this buffer determines how mutch of command output will be
stored in buffer.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
In file include/kernel/thread.h in "struct _thread_base" is a member
called "_wait_q_t *pended_on"
At the same time in file kernel/sched.c is function called
"static _wait_q_t *pended_on()"
Coding scanning tool assigns violation (MISRA R5.9) that static
object reused, because thread.h is included in struct.c file.
I think we can rename function to avoid misreading in the future.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
In code is a variable "chunksz_t chunksz" that has the same name as
function "chunksz_t chunksz()" in the one heap.h file.
Create unique variable name to avoid misreading in the future.
Found as a coding guideline violation (MISRA R5.9) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The commit adds check if offset is positive; previously negative
offset would be allowed, which means that writing flash before flash
area start was possible.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fixes: #35187
This extends the Zephyr package to also honor version when ZEPHYR_BASE
is set in environment.
Specifying `find_package(Zephyr 2.x.y)` without using ZEPHYR_BASE will
lookup a Zephyr in following order:
- Current repo, if that is a Zephyr repo
- Current west workspace
- Exported Zephyr CMake package for freestanding application
and ensure that the chosen Zephyr meets the version criteria.
When setting ZEPHYR_BASE in environment the version check is disabled
and the Zephyr referenced by ZEPHYR_BASE will always be used regardless
of its version.
A user doing `find_package(Zephyr 2.6.0)` and using ZEPHYR_BASE
presumable still want to ensure that the Zephyr referenced by
ZEPHYR_BASE is v2.6.0 or newer.
Also, `west build` with a freestanding application requires ZEPHYR_BASE
in order for west to lookup the `west build` extension command.
This practically means a user cannot both specify a Zephyr version for a
freestanding application and at the same time use `west build` but has
to use plain CMake to ensure correct version check, see #35187.
With this commit, users will have complete Zephyr package version
checking with freestanding applications
find_package(Zephyr 2.6.0 REQUIRED HINTS $ENV{ZEPHYR_BASE})
find_package(Zephyr 2.6.0 EXACT REQUIRED HINTS $ENV{ZEPHYR_BASE})
when also having ZEPHYR_BASE in environment.
This commit has no behavioral change for those patterns:
find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
find_package(Zephyr 2.6.0 REQUIRED HINTS $ENV{ZEPHYR_BASE})
find_package(Zephyr 2.6.0 EXACT REQUIRED HINTS $ENV{ZEPHYR_BASE})
when ZEPHYR_BASE is not in environment.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When including other rst files (via .. include::) the existence of the
included file may depend on when the _adjust routine is called, so only
ignore absolute paths.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
PosixPath or WindowsPaths are not portable, so using them on pickle
files, which can potentially be re-used is not safe. Changed to use the
posix path as a string.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use ZTEST_DMEM macro to place the buffers containing sample values
in the ztest memory partition that can be accessed from userspace.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
ATOMIC_OPERATIONS_BUILTIN issue (internal jira number: P10019563-43273)
has been fixed in new relasese MWDT 2021.03. We can use builtin atomic.
this commit reverts PR: #28528
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Our minimal C library makes an alias of UINT*_C() to
be __UINT*_C() and INT*_C() to __INT*_C(). However,
in mwdt, these are not defined by default, so define
them ourselves. We have similar fix for xcc: #31962
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The sample would consequently try to print invalid data
the offset into the data was incorrect calculated to
always be at the end of the data, instead of at the
end of the data minus an offset.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adjust default options to match the ones in CMake. Quote options when
invoking CMake.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make default Sphinx options more user-friendly, i.e. colored output so
that one can easily follow build progress.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
From the point of checking the info pointer value all code in the
z_multiboot_init() function depends on it being non-NULL. Therefore,
simply return from the function if it's NULL.
Fixes#33084
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix issue is host handling of connected and disconnected event.
Since the host wants the disconnected event to be processed as a
priority event as well as in reguler event context while the connected
event is always in reguler event context we can end up in a situation
where the disconnected priority event is processed before the connected
event.
Since the disconnected priority event is there to release unack'ed TX
pending on the connection in case the RX thread is blocked waiting
for TX resources, we need to keep this behavior. Otherwise this would
be a potential deadlock of the RX thread waiting for resources that can
only be released by the RX thread.
When this situation happens we know that there cannot be any pending TX
on this connection so we can safely skip releasing of unack'ed TX.
The second thing the disconnected priority event does is marking the TX
path on the connection as disconnected. We need to do the same in this
situation, so we make sure that the TX path is already marked
disconnected when providing the connected callback to the application.
This fixes a regression from 4be66bd33d.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving the L2CAP sent callbacks the dynamic L2CAP channel may
have been disconnected already. The user of the dynamic channel should
have received the disconnected and released callbacks for this channel
to release any resources for the data being sent, so simply ignoring
this sent callback is enough.
Fix sent callbacks by providing the CID to the callback instead of a
pointer to potentially released memory, and lookup the CID to check that
it is still valid.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add check for the advertising already being enabled when attempting to
start the advertising set.
Document that the advertising set cannot be started from the connection
connected callback, and instead has to be started from the advertising
set connected callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix multiple advertisers with different ID support, this was added
in 98321c61fb but the guard was never
removed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix to avoid an assertion when processing an acknowledgment
in the first connection event in peripheral role.
Ensure that empty flag reflects the state of the Tx queue,
as a peripheral the first connection event has no prior PDU
transmitted, an incorrect acknowledgment by peer should
not dequeue a PDU that has not been transmitted on air.
Relates to assert added in commit 2bfaadffb8 ("Bluetooth:
controller: Add Tx fragmentation assertion").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When using the LPC55S69 with TF-M, the ROM-based flash
controller is restricted to the secure processing environment
to prevent NS access to flash memory. Any access to the
flash controller will cause a secure fault, and the NS
application will halt execution.
This commit disables access to the IAP flash peripheral
when using the lpcxpresso55s69_ns target, enabling TF-M
to restrict IAP access to the secure side.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
File prj.mcp2515.conf was previously removed from project as it was
made redundant.
Paths containing uppercase CAN were changed to lowercase.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
When a WIFI driver is slow to get interface up the system not connect
to WIFI access point. This add some tries to let driver be proper
initialize to allow accept connection request.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
arc_v2_irq_unit_init function will init all interrupts and disable
they, we must make sure we call it first before we use interrupts.
so we need to increase its priority to highest in PRE_KERNEL_1 stage.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
tracerecorder maintains its macros definitions outside of zephyr and can
deal with undefined macros or hooks that are implemented in Zephyr but
not yet implemented in TR. Move inclusion to the bottom after all macros
have been initialized.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make custom RTT locking configurable and select it where it is needed.
When using RTT for tracing we want to use the default locking.
Update both segger and tracerecorder modules to support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
List of the changes:
* update info about ARCv3 HS6x which support has been upstreamed
recently
* mark HS3x userspace support as Y
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
In the timeout order test, the usage of k_poll() assumes that it
only returns after all events are ready. However, that is not
the case, as k_poll() returns when non-zero number of events are
ready. This means the check for all semaphore being ready after
k_poll() will not always pass. So instead of using k_poll(),
simply wait a bit for timers to fire, then check results.
Also add some bits to clean up at the end of test.
Fixes#34585
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update OpenThread revision, to introduce fixes for the OpenThread
configuration cache variables behaviour, making them up-to-date
with the actual Kconfig configuration.
Fixes#34233
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Similar to commit c6ff61220e, use a
harness config to limit execution of the adafruit_2_8_tft_touch_v2
sample variant to boards that have this shield attached.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The PR fixes the pwm_led sample:
- now test doesn't rely on any specific device name
- Logs which are scanned with regex in the test are printed
only after a command passes (before failures were not
affecting the test verdict)
- If 1 sec cycle is not supported appropriate info is printed
and won't cause the test to failed
- Changed second "Turned off" msg so regex doesn't mix it with the
the first one.
Fixes#35524
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
some mwdt compiler options not support cmake function
check_c_compiler_flag, let's add mwdt compiler options for
hsdk boards without check.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
As per description of the sys_clock_elapsed() function, "the kernel
will call this with appropriate locking, the driver needs only provide
an instantaneous answer". Remove then the unnecessary locking from the
function, as it only adds an undesirable delay.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct the way the relative ticks value is calculated for an absolute
timeout. Previously, elapsed() was called twice and the returned value
was first subtracted from and then added to the ticks value. It could
happen that the HW counter value read by elapsed() changed between the
two calls to this function. This caused the test_timeout_abs test case
from the timer_api test suite to occasionally fail, e.g. on certain nRF
platforms.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The scheduler has historically had an API where an application can
inform the kernel that it will never create a thread that can be
preempted, and the kernel and architecture layer would use that as an
optimization hint to eliminate some code paths.
Those optimizations have dwindled to almost nothing at this point, and
they're now objectively a smaller impact than the special casing that
was required to handle the idle thread (which, obviously, must always
be preemptible).
Fix this by eliminating the idea of "cooperative only" and ensuring
that there will always be at least one preemptible priority with value
>=0. CONFIG_NUM_PREEMPT_PRIORITIES now specifies the number of
user-accessible priorities other than the idle thread.
The only remaining workaround is that some older architectures (and
also SPARC) use the CONFIG_PREEMPT_ENABLED=n state as a hint to skip
thread switching on interrupt exit. So detect exactly those platforms
and implement a minimal workaround in the idle loop (basically "just
call swap()") instead, with a big explanation.
Note that this also fixes a bug in one of the philosophers samples,
where it would ask for 6 cooperative priorities but then use values -7
through -2. It was assuming the kernel would magically create a
cooperative priority for its idle thread, which wasn't correct even
before.
Fixes#34584
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
As we don't use memory allocated in test_calloc, test_no_mem_malloc,
and test_no_mem_realloc. malloc call can be optimized away (that really
happens with ARC MWDT toolchain). That breaks the test. So disable
optimization for these functions.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
If we receive any data in FIN_WAIT_1, then ack it even if we
are discarding it.
Fixes#33986
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Jim Paris <jim@jim.sh>
The k_fifo_ prefix is meant for kernel API functions, and
not to our socket helper. So remove the k_ prefix in order
to avoid confusion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are waiting all the data i.e., the MSG_WAITALL flag is set,
then if we have not yet received all the data at the end of the
receive loop. We must use the condition variable to get the signal
when the data is ready to be received. Otherwise the receive loop
will not release the socket lock and receive_cb will not be able
to indicate that data is received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a regression when application is waiting data but does
not notice that because socket layer is not woken up.
This could happen because application was waiting condition
variable but the signal to wake the condvar came before the
wait started. Normally if there is constant flow of incoming
data to the socket, the signal would be given later. But if
the peer is waiting that Zephyr replies, there might be a
timeout at peer.
The solution is to add locking in socket receive callback so
that we only signal the condition variable after we have made
sure that the condition variable is actually waiting the data.
Fixes#34964
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix deadlock when db_hash_commit has to wait for the delayed work to
finish. This creates a deadlock if the delayed work for database hash
calculation needs to store the hash since the settings API is locked
when calling the commit callback.
Remove call to k_work_cancel_delayable_sync from db_hash_commit in order
to avoid the deadlock. Instead move comparing of the stored hash to the
delayed work and reschedule the work with no wait.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If there are no sockets in the system, then do not drop the
packet immediately as there can be other L2 network handlers
like gPTP in the system. This will also allow ICMP messages
to pass to local handler.
Fixes#34865
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is a comment which needed to be rephrased for inclusive
language. This commit replaces it with the recommended
replacement.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
File userspace.c contains dead code in function char *otype_to_str()
Remove "return NULL" and replace with "ret = NULL".
Found as a coding guideline violation (MISRA R2.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add missing introduction to queues which are basically FIFOs and in
zephyr are used to implement both FIFO and LIFO objects.
Fixes#35199
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the requirements.txt from the training directory of the
magic wand sample as it is causing issues in CI. Updates README.md
to explicitly state the Python packages listed in requirements.txt.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Do not get the mainmenu title from SOF by splitting Kconfig the same way
we do it in Zephyr.
Fixes#35553
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When CONFIG_TFM_BL2 is enabled on the LPC55S69 there isn't
enough memory left for TF-M to perform a debug build. Exludes this
platform from this specific test case.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses aliases and remove board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Fixes: #25313
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB devicetree nodes in Zephyr have different names,
mostly derived from the designations in data sheets.
We also have an USB audio sample which has a kind of
experimental approach to configure audio devices, that
are not real hardware, via devicetree.
Sample itself is generic and can be run on any board with
USB device controller and isochronous endpoints support.
Add usbd0 alias to specific USB node to allow generic
USB audio sample to be build on nRF and i.MX RT boards.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace suffix ull to ULL to increase code readability and prevent
unexpected behaviours, because the lowercase character l shall not be
used in a literal suffix
Found as a coding guideline violation (MISRA R7.3) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This needs to use 'main' for its default now.
Without this patch, GitHub redirects to main, but displays a banner
that says 'Branch not found, redirected to default branch' at the top.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove dead code enum tracing_log_id
Not used anywhere in the code. Also it caused MISRA rule 8.12
violation.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This board uses an old bootloader version. The bootloader
always relocate code due to flash bootloader. This imply
a wrong behaviour when using --offset. This is fixed using
bossac legacy mode.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add compatibility mode with old sam-ba flash bootloaders that don't have
offset capabilities. These bootloaders flash to a pre-defined flash
region. At end, bossac will suppress --offset parameter.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Coverity detected that a zero divisor can be passed to
ll_create_connection() without parameter sanitization. Conditionally
check the connection creation parameters according to spec.
Fixes#35343.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Treat warnings as errors. Since we already disable warnings for
undocumented members (the major source of warnings), reported warnings
are in all cases real problems that should be fixed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
1. functions can only belong to one group, use arch-timing (already
defined)
2. group was not properly terminated
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
On sending write request we should check write response.
If data prepaired to be written by peer or offset are not equal
to the data and offset we sent, we shall send Execute Write
Request with Request Flag set to 0x00 (Cancel All Prepared Writes).
This was affecting GATT/CL/GAW/BI-32-C and GATT/CL/GAW/BI-37-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix the missing HCI event data len limit check when encoding
incomplete advertising data report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Max data length has to be adjusted for subevent code, otherwise we'll
hit an assert when trying to add data to event due to insufficient
free space.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
After system reset (SETETHRST) interrupt enable register (EIE)
has the default value 0x8010 and global interrupt enable flag (INTIE)
is set. This is not desired and the INTIE flag should be set only at
the end of the initialization.
Disable INTIE flag and set desired interrupts sources in
a single write command just right after system reset.
Resolves: #35091
Reported-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The controller has several interrupt sources which are signaled
via a single INT pin. Only the interrupt sources that are explicitly
switched on during controller initialization may generate an interrupt
signal. Currently there are only PHY Link Status Change Interrupt
and RX Packet Pending Interrupt enabled. So there is no other reason why
an interrupt can be triggered.
Terminate interrupt handling thread on unknown interrupt
only when debugging, as there are concerns that stopping
thread in the field is going too far.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable the option to pause the fallback hardware watchdog if the MCU is
halted by a debugger.
This fixes issue #33509 where some boards with Nordic MCUs could not be
flashed anymore after using the task watchdog sample.
Signed-off-by: Martin Jäger <martin@libre.solar>
Enable the option to pause the watchdog if the MCU is halted by a
debugger.
This fixes an issue with some Nordic MCUs (see #33509) where the board
could not be flashed anymore if a short watchdog timeout (<100 ms) was
used.
Signed-off-by: Martin Jäger <martin@libre.solar>
arcmwdt toolchain has various pre build libraries, we can find it in
path: {METAWARE_HOME}/lib, and it will use av2em lib by default.
it's OK for em boards, but not suitable for hs boards. I have tested
hs38_full library for hs boards, it's OK. let's use it.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The resource description on the OMA LwM2M registry states that only the
first instance of a particular error should trigger creation of a new
error code instance.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Added test which validates that uart device correctly handles
going to and from low power state.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Function should return -ENOTSUP when asynchronous api is not
supported by the device.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deadlock may occur when uart device was put to low power state
while uart_poll_out was in progress. Poll out pends until uarte
is ready to send new byte and it is detected by endtx and txstopped
events being set. When uarte was disabled while poll_out was pending
events were never set and that lead to deadlock. Added a step
in going to low power state in which CPU waits for txstopped event
and only after that uarte peripheral is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Every va_start() currently triggers a FPU access trap if FPU is not
already used. This is due to the fact that va_start() must copy FPU
registers that are used for float argument passing into the va_list
object. Flushing the FPU context to its owner and granting access to
the current thread is wasteful if this is only for va_start(),
especially since in most cases there are simply no FP arguments
being passed by the caller.
This is made even worse with exception code (syscalls, IRQ handlers,
etc.) where the exception code has to be resumed with interrupts
disabled upon FPU access as there is no provision for preserving an
interrupted exception mode's FPU context.
Fix those issues by simply simulating the sequence of STR instructions
that the va_start() generates without actually granting FPU access.
We limit ourselves only to exception context to keep changes to a
minimum for now.
This also allows for reverting the ARM64 exception in the nested IRQ
test as it now works properly even if FPU_SHARING is enabled.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is no known TFM/secure side solution for the lpcxpresso55s28.
The '_ns' board config variant was added as a copy/pasted based on
how some other boards did things. If/when TFM supports the board
we can revert this to support it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Changes CMakeLists.txt in TensorFlow samples from explicit file
list to a GLOB capturing src/* to make TensorFlow samples consistent
with other samples in tree.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Fixes documentation for samples that incorrectly state that TensorFlow
library requires the -fno-threadsafe-statics flag to compile.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Adds no-threadsafe-statics to compiler flags for gcc and arcmwdt.
The flag is required to compile the samples - the module can compile
without it.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
(same considerations as commit 2f01479b)
In a multi-instance driver it may happen that on some h/w
one device should use interrupts and a second device should use
polling mode. So, CONFIG_IIS2ICLX_TRIGGER is not enough to discriminmate
if interrupt inizialization routine should be called or not; the choice
is now based whether the "irq-gpios" property is present in the DT
for that particular instance or not.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use gpio_pin_configure_dt() and gpio_pin_interrupt_configure_dt()
for drdy_gpio: they result in a more readable code.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add test to statically allocate a minimum-size heap, verify that it
works to allocate a single byte and that it doesn't overrun its memory
bounds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The K_HEAP_DEFINE macro would allow users to specify heaps that are
too small, leading to potential corruption events (though at least
there were __ASSERTs that would catch this at runtime if enabled).
It would be nice to put the logic to compute this value into the heap
code, but that isn't available in kernel.h (and we don't want to pull
it in as this header is already WAY to thick). So instead we just
hand-compute and document the choice. We can address bitrot problems
with a test.
(Tweaks to heap size asserts and correct size bounds from Nicolas Pitre)
Fixes#33009
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The interrupt offload testcases fail on some boards because the timing
of the delay is too short. Refine the testcases and make it not rely
on the delay timing.
Fixes#35097Fixes#35241
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
This patch enables the DMA chan_blen_transfer and loop_transfer tests on
the nucleo_f070rb board.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The STM32F0 MCUs (except STM32F030XC) don't have a DMA channel selection
register (DMA_CSELR). This patch fixes the build of the dma_stm32 driver
for them.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The hardware watchdog was always fed with channel ID 0. This is correct
in most cases, but we should still use the actual ID returned from
wdt_install_timeout.
Signed-off-by: Martin Jäger <martin@libre.solar>
As of today we assume that the help text contained in the Kconfig help
field will be properly formatted RST. However, there is no guarantee
that this will happen. This patch tries to address this problem by:
- Escaping inline RST characters for text that needs to be rendered as
"normal text" (i.e. prompt)
- Use code-blocks to render help content. This way help is rendered as
literal text and so it does not get processed by the RST parser.
A secondary change: the index table now contains the prompt information
only. The page was taking a long time to render because of the large
amount of content. Using a table doesn't help either. Note that adding
code-block to include help as a literal increases build time even more,
so it is not an option.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds a note on a known config conflict with mbedtls 2.26.0 and TF-M
where the mbedtls PSA APIs can no be enabled at the same time as TF-M.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
the `doc-examples` project is not used and, in fact, is a duplicate of
the Zephyr project.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make HTML output optional. The extension checks the `GENERATE_HTML`
option to check if active.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With this patch the sys_clock_set_timeout function counts the cycles
elapsed while computing the systick timer's new load (tickless mode).
This cycles are then added to the total cycle count instead of being
lost.
This patch mitigates uptime drifting in tickless mode (especially when
high frequency timers are registered).
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
As EVENT_OVERHEAD_START_US offset is used in ticks unit in
LLL, ULL scheduling using ticker should also use ticks unit
for EVENT_OVERHEAD_START_US when reducing the first
connection event preparation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert the strict preempt ticker start failure check.
Preempt ticker start can fail when enqueuing prepares into
already filled pipeline which has preempt ticker already
started for the first prepare that was added in the
pipeline.
Regression introduced in commit 5b75bdf589 ("Bluetooth:
controller: nRF5: Check preempt event on timeout").
Fixes#35476.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Picky C++ compilation reported warnings that input arguments
are not used. Adding missing ARG_UNUSED().
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
C++ compiliation may generate warning if all fields are not
explicitly initialized. Added explicit initialization to 0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
C++ compiliation may generate warning if some fields are not
explicitly initialized. Added explicit initialization to 0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
syntax ". += length;" not work with arcmwdt toolchain, let's using
". = . + length;", which both work with gnu and arcmwdt toolchain.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
From le_ext_adv_param_set we will occasionally attempt
to call bt_addr_copy where the `addr` and &adv->random_addr.a
are the same pointer. Doing a memcpy where source and destination
is the same pointer is undefined behavior and should not be
done.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The VCS client shell was never compiled before, and thus
the implementation had a few undetected errors.
This commit adds the VCS client to the shell CMakelists
as well as fixing the issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The common API functions in VCS had dead code in specific
configurations, causing coverity issues. Fixed by this
commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Error out on compatible properties with invalid values. The regular
expression used to validate them matches what's used in dt-schema.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These compatibles don't match the dt-schema regular expression for
compatible properties that we'd like to support in Zephyr because they
do not begin with a letter.
Use linaro, as a vendor prefix to make them compliant. Update the
release notes since out of tree users will need to keep up.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
IRQ 57 is reserved in the NXP LPC55S16 SoC. Thus, limit the number of
interrupts reported to the test, so that it does not try to use it.
Fixes#34915
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fix side effect in assertion when checking a volatile
variable inside assert check.
Fixes#32904, #32923.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Sphinx handling of 404 page is not that easy when using theme
customizations. Enabled the `sphinx-notfound-page` extension (maintained
by readthedocs) to fix its displaying.
Also adjusted Zephyr logo (was causing some Sphinx processing errors
when trying to scale it).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Setting overflow:auto adds a scrollbar to admonitions if the content
overflows. Some adminitions overflow specially on mobile devices.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since Zephyr docs switched to fixed-width, the list of Kconfig options
is not displayed correctly. We should move to another data
representation format, e.g. definition lists. Until this decision is
made, add a workaround that forces the template to expand page width to
the maximum on Kconfig list pages.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With current CSS construct like void f() are rendered together, i.e.
voidf(). Add some spacing to make it more like "void f()".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The scrolling customizations were used to hide the logo when scrolling
down. With this change, logo is always displayed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since logo already brings to home page, remove the link displayed above.
It saves some vertical pixels while making docs nicer. Also adjusted
wy-menu-vertical max-height to account for the new height (note: was
wrong before).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit forces the `CONFIG_BUILD_WITH_TFM=y` option when
using the `_ns` build targets for the LPC55sXX.
Using these targets in samples or in CI without an accompanying
secure environment image (ex. TF-M) leads to execution failures,
since the NS images are offset a predetermined amount.
Fixes#35100
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Add empty Z_LOG_MSG2_SIMPLE_CREATE when CONFIG_LOG_SPEED=n. It
allows to reduce compilation time by removing code at preprocessor
stage. Previously functionality was the same, compiler was removing
unused code but because logging is widely use that had a visible
impact on compile time.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Do not assert initialization priority when building
with CONFIG_TRUSTED_EXECUTION_SECURE=y.
Regulators are not enabled so should not assert
initialization chain priorities.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Converts the display driver and lvgl sample.yaml to select boards for
the adafruit_2_8_tft_touch_v2 shield configuration by depending on the
arduino_{gpio,i2c,spi} features instead of using an explicit
platform_allow list. This will enable twister to automatically select
new boards that add support for Arduino ports.
The reel_board and reel_board_v2 are excluded due to a conflict between
display drivers (onboard display vs. shield display).
The ubx_evkannab1_nrf52832 board is excluded due to a conflict between
the arduino_spi and arduino_i2c ports, which cannot be used
simultaneously.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds arduino_spi to the list of supported features for all NXP boards
that define an arduino_spi node in their device tree. This enables
twister to select these boards for tests or samples the depend on this
feature.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When using the uart driver with interrupt and async api
at the same time (instance for interrupt and instance for async),
the transmission complete interrupt was handled in the async
handling section, even when interrupt driven api is used.
This caused transmission to not work properly in interrupt mode.
The fix is to move the interrupt mode handling to the begginning
of the isr. If async mode is used then interrupt mode code
will not be run.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
The reboot option of the +KSRAT command is only
supported by newer firmware.
Add a check to determine what version of the command
to use when setting the RAT.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Rename the NXP LPCXpresso55S16 board definition from
lpcxpresso55s16_ns (non-secure) to lpcxpresso55s16 and remove TF-M
configuration options.
While the LPC55S16 does have Arm TrustZone support, there is no TF-M
support available upstream yet.
Fixes#35100
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The send_reliable function was reused in multiple places as part of the
k_delayed_work changes for Bluetooth Mesh in #33782. This function
contains a line that resets the start timer, causing prov_retransmit to
continously move the goal post for when to give up sending.
Extract this line out of the send_reliable function, and put it along
with the other link.tx initialization in bearer_ctl_send and
prov_send_adv.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Change the return value from -ENOTCONN to -EINVAL as that
is a more appropriate return value for checking a NULL
pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change from -ENOTCONN to -EINVAL as that is a more appropriate
return value for checking a NULL pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of return -ENOTCONN they will now return -EINVAL as
that is a more appropriate return value for checking if
the pointer is NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When application calls TCP connect(), the call is blocked
by a semaphore which is then released when the connection
is established. Unfortunately the semaphore release was done
before the connection was marked as established. Depending
on the configuration options set, it is possible that after
the semaphore release, the thread that is waiting on connect()
is run immediately. Because of this, the connection bookeeping
still thought that the connection was not established even if
it was. A simple solution is to release the semaphore after
the connection is marked as established.
Fixes#35390
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit modifies st prescaler value from 0 to 10000 for
STM32 nucleo_f207zg. So pwm_api test results in successful
execution on nucleo_f207zg board.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
The coverity report "Out-of-bounds access". The reason is
The room of src and dest buffer is less than the count wanted
to be copyied. So enlarged the src and dest buffer to solve this
issue.
Fixes:#35345
Fixes:#35346
Signed-off-by: Ying ming <mingx.ying@intel.com>
Enable the :members: option by default when using breathe directives.
This exposes automatically stuff like structure fields.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The way some structures were documented was causing issues on the
Sphinx/Breathe side. Move to a more "standard" format.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When duplicates exist the problem may come from two or more distinct
constructs. When running parallel builds there is no guarantee on which
one will come first (or if all), so allow any C construct.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When this option is enabled some data structures have missing pages. Use
the default setting (NO).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch adds a label property to the GPIO LED parent node and fixes
the label property description of the child node. Indeed it is the label
of a parent node which can be used as device_get_binding() parameter to
retrieve the LED device, and not the one of a child node.
In addition, this patch sets both this properties as not required
because they are not.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch adds a label property to the PWM LED parent node and fixes
the label property description of the child node. Indeed it is the label
of a parent node which can be used as device_get_binding() parameter to
retrieve the LED device, and not the one of a child node.
Fixes#34275
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
If the label property is missing in a "pwm-leds" compatible DT node
(which is almost always the case), then the device name is now set to
DT_NODE_FULL_NAME instead of "LED_PWM_$inst" previously.
This allows applications to use the DEVICE_DT_NAME macro to retrieve
the device name instead of gessing an arbitrary string.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
In tests that expect returning error in response for l2cap
connection request we use predefined PSMs. This commit adds
check for required keysize (which will always return error,
as connection is not secure and key size will always be 0)
instead of setting security level 4 (which would return
insufficient authentication, not insufficient key size).
It also adds suport for PSM used in insufficient authorization
tests - choosing this PSM will set flag that triggers error
on channel accept.
This affects tests L2CAP/LE/CFC/BV-[10-15]-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
* boot_serial: allow to build when CONFIG_MULTITHREADING=n
* allow to not provide scratch area definition if scratch
algorithm is not used.
fixes#35048
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
On Apollo Lake, each GPIO controller has more than 32 pins.
But Zephyr API can only manipulate 32 pins per controller.
So the workaround is to divide each hardware GPIO controller
into 32-pin blocks so each block has a GPIO driver instance.
Compounding to the issue is that there cannot be two device
tree nodes with same register address. So another workaround
is to increment the register addresses by 1 for each block.
So when mapping the address, the lowest 8-bit needs to be
masked to get the actual hardware address.
Fixes#28551
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Publish docs every 3 hours, this way fixes early in the morning are
reflected online earlier and no need to wait until the next day.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current location makes no sense because this is for users, not
contributors. Put it in the GSG since a previous attempt to restore
its location under the user guides was rejected in favor of this
location.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
One of subtests had been supposed to check if log files are numbered
properly and in continuous manner, but due to logic error it would
also count non-log files.
Fixes: #33629
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fixes sample execution ending early with error, as it attempted
to mount the LittleFS partition second time, after it has already
been mounted by the auto-mount feature.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
`check-warns` step is no longer used since the introduction of
`warnings_filter` extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit fixes a bug where outdated RPL entries might not be removed
properly from the persistent storage making those entries dead.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The BabbleSim test for friendship has some timing requirements imposed
by the polling mechanism, which requires synchronization between
devices.
Add a synchronization message from LPN to the mesh device in the and
clear poll events for the friend in the group messaging test to remove
timing dependency. Add a large margin on the wait time between polls in
the friend messaging test for the same purpose.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
According to Bluetooth core specification v5.2, if Host set
random address when any of scanning (passive or active), the
Controller shall return the error code Command Disallowed (0x0C).
Signed-off-by: Freddie Yang <freddie.yang325@outlook.com>
The nRF SOCs declare support for SWO using the HAS_SWO define. In
addition, the SWO pin has to be configured at runtime, which is done
through the Nordic HAL by defining ENABLE_SWO.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case CONFIG_NOCACHE_MEMORY=y, the D-Cache need to be clean and
invalidated before enabling the MPU to make sure no data from a
__nocache__ region is present in the D-Cache.
If the D-Cache is disabled, SCB_CleanInvalidateDCache() shall not be
used as it might contains random data for random addresses, and this
might just create a bus fault.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On reset we do not know what is the status of the D-Cache, nor its
content.
If it is disabled, do not try to clean it, as it might contains random
data for random addresses, and this might just create a bus fault.
Invalidating it is enough.
If it is enabled, it means its content is not random.
SCB_InvalidateDCache() will clean it, invalidate it and disable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If this call receives an invalid device pointer as argument it
assumes that the `device` is not ready for usage.
This routine is currently called by two device specific APIs:
- device_usable_check(const struct device *dev)
- device_is_ready(const struct device *dev)
The device-specific APIs documentation claims that these two
routines must be called with a device pointer captured from
DEVICE_DT_GET(). So passing NULL is a violation of the rule.
Nevertheless, is quite common in drivers to assign NULL to
a device pointer if the corresponding DT property has not been
found (e.g. a not used gpio interrupt declaration for a given
device instance) and seems legit to interpret this condition
same as the device is not ready for usage.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Allow time for the shell to successfully echo the reboot command input
before the reboot abruptly terminates it. n This can help external
systems that interact with the shell and require the reboot command's
echo to successfully complete to synchronise with the device.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/35325
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
Modify support for u-blox BMD-345-EVAL which uses the nRF52840
and a Skyworks RFX2411 FEM.
These edits follow the naming cnoventions that is used
with the other u-blox EVKs recently added, or in progress
This board is similar to the nRF52840dk_nrf52840 with the
addition of a FEM. Four Arduino GPIO pins have been
reassigned to the PA_LNA control pins.
u-blox would prefer to use this naming convention to match
other BMD-3xx-EVAL and EVK-NINA-Bx boards recently submitted.
Tested with blinky, button, and Bluetooth peripheral_hr
Checking dts files
Updated CODEOWNERS to rename bmd_345_eval to ubx_bmd345eval_nrf52840
Added CMakeLists.txt, updated board.c
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
The board definition provides partition configuration that is enough
for this test and does not require overlay.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Call on_status if the Reason-Phrase is not provided.
This allows for the numeric status code to be set.
Also, ensure the numeric status code is always set
in on_status, not just if the specific callback is set.
Signed-off-by: Justin Morton <justin.morton@nordicsemi.no>
Buffer used for storing log messages must be aligned as specified
by Z_LOG_MSG2_ALIGNMENT. Added missing alignment.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Without TX thread support in network stack USB device stack
blocks it self by usb_transfer_sync() which is
called in the same context as usb_set_interface() in sequence
of netusb_enable(), net_if_up(), net_l2_send().
Fixes: #35338
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
work_q.c is not being built or used, it was replaced by user_work.c
which now has k_work_user_queue_start.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Device Tree address mixup between
SAI2 <-> SPI2 and SAI3 <-> SPI3
Add functionality to SPI2/3
Tested on SPI2
Signed-off-by: Rico Ganahl <rico.ganahl@bytesatwork.ch>
Add minimum harness and to get the sample passed when run using
twister.
Adding console validates uart init with DEVICE_RUTIME=y.
Additionally, clarify comment about DEBUG activation.
Fixes#35033
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In case of multi-instance the driver tries to discover whether
there are devices attached to SDx/SCx sensorhub bus. If not it
just turns the shub_inited variable (inside data structure) to false
and skips doing any further sensorhub related action for that
particular IIS2ICLX device instance, regardless the fact that the
macro CONFIG_IIS2ICLC_SENSORHUB is enabled.
Moreover, the info found during the enumeration process for a
particular instance (number and types of attached devices) must be
saved inside the per-instance data structure, so that more than one
IIS2ICLX device can be used as a sensorhub without interfering with
the others.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
In case of multi-instance the driver tries to discover whether
there are devices attached to SDx/SCx sensorhub bus. If not it
just turns the shub_inited variable (inside data structure) to false
and skips doing any further sensorhub related action for that
particular LSM6DSO device instance, regardless the fact that the macro
CONFIG_LSM6DSO_SENSORHUB is enabled.
Moreover, the info found during the enumeration process for a
particular instance (number and types of attached devices) must be
saved inside the per-instance data structure, so that more than one
LSM6DSO device can be used as a sensorhub without interfering with
the others.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We are in the process of changing the HEAD branch in the zephyr
repository from 'master' to 'main'. Users will need west version at
least 0.10.1 for the plain 'west init' line in the getting started
guide to still work after that change.
To avoid problems:
- add -U to the macOS and Windows lines for installing west (this
option is already there for Ubuntu). Upgrading west will make
the guide 'just work' for users who have an old version.
- bump the minimum version in the relevant requirements file,
in case anybody is doing something like basing a CI setup
on those versions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Follow-up: #34868
The CMAKE_ARGS was accidentally lost during work on #34868.
This commit fixes that by re-adding `CMAKE_ARGS` as multi value arg.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The original state management solution involved separate locks for a
work queue and each work item. To avoid inter-lock dependencies a
window was left between the point where the work item was removed from
the queue (protected by queue lock) and the point where the work item
state was updated to mark the work item running.
This introduced a bug: If a cancellation was issued during this window
it would succeed, and the work item would appear to be idle even
though in fact the work queue thread was about to run it.
Since there is now only one lock, move the work item state updates
into the mutex regions associated with dequeuing the work item and
clearing the work queue busy flag.
Note that removing the window between queue and work mutex regions
eliminates the potential of having a dequeued work item be cancelled
before its QUEUED flag is cleared, simplifying the work item state
update.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Violation of the [MISRAC2012-RULE_14_3-j]:
Boolean operations whose results are invariant
shall not be permitted
Probably in that part of code is a misprint.
Added to check _OBJ_INIT_FALSE case explicitly
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Converts the Bluetooth peripheral_hr sample.yaml to select boards for
the frdm_kw41z shield configuration by depending on the arduino_serial
feature instead of using an explicit platform_allow list. This will
enable twister to automatically select new boards that add support for
an Arduino serial port.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds arduino_serial to the list of supported features for all NXP boards
that define an arduino_serial node in their device tree. This enables
twister to select these boards for tests or samples the depend on this
feature.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit fixes a bug where incorrect pointer passed to publish_sent
in access.c caused bus fault.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
"child resuming" text is printed when dummy_device_pm_ctrl is
called. The driver is using the async api, this means that this call
will happen only when the worqueue runs what will happen only when
this thread blocks waiting on the conditional variable.
The last thing is, the dummy driver was putting the parent driver
asynchronously consequently the "parent suspending" message would just
print after "Device PM sample app complete". Just use the sync API to
get these messages printed in the expected order.
Fixes#35336
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When a non-zero delay is used the schedule functions can't fail, but
if K_NO_WAIT is passed error conditions may be forwarded from
k_submit_to_queue.
Also add a missed error return from k_submit_to_queue.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Our z_swap() API takes a key returned from arch_irq_lock() and
releases it atomically with the context switch. Make sure that the
action of the unlocking is to unmask interrupts globally. If
interrupts would still be masked then that means there is an OUTER
interrupt lock still held, and the code that locked it surely doesn't
expect the thread to be suspended and interrupts unmasked while it's
held!
Unfortunately, this kind of mistake is very easy to make. We should
catch that with a simple assertion. This is essentially a crude
Zephyr equivalent of the extremely common "BUG: scheduling while
atomic" error in Linux drivers (just google it).
The one exception made is the circumstance where a thread has already
aborted itself. At that stage, whatever upthread lock state might
have existed will have already been messed up, so there's no value in
our asserting here. We can't catch all bugs, and this can actually
happen in error handling and/or test frameworks.
Fixes#33319
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test takes an interrupt lock and tries to call z_swap_unlocked()
while holding it. That's not legal (in the general case it means
you're breaking a caller's lock!), though in this particular case it
was safe because we'll never return to this.
Regardless, there is a natural z_swap_irqlock() that releases the lock
atomically. Use that.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's not at all clear to me why this was set to 1cpu, it's a single
thread doing sequential things. (I tripped over it because the 1cpu
happened to tickle an unrelated arm64 bug with interrupt state. But
we might as well fix it here.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test case was taking a (traditional) irq_lock(), which masks
interrupts, and then calling k_mutex_lock() with a timeout of
K_FOREVER, which is a blocking call. That's not legal, because it
will obviously schedule other threads to run in a context where the
code was promised it would not. This used to be an uncaught error,
but now we have an assertion that catches this.
It's not clear what this test case is supposed to be testing, as the
behavior is actually identical to the release_global_lock case except
for the (incorrect) addition of the irq_lock(). If this is needed for
code coverage we can work to figure out the real root cause of the
missing coverage later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
when generating a new map, set the status of the device and whether it
is connected or now. The available key is runtime only and is not part
of the map anymore.
Adapt documentation and remove available as a key in the generated map.
Fixes#35341
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This avoid IRQ to be handle before iface init is finished
(especially before iface address is set)
Fixes#32771
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The testsuite was always forcing minimal logging. This is problematic
as it does not allow user to see full logging string. Allow user to
override the minimal logging if needed, the default is still to
enable minimal logging.
[DL: Commit 7f08061f0c reverts this.
Since this is useful, let's re-apply this.]
Fixes#34696
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The logging macros use _Generic() atm and it started to complain
when we are trying to print pointer value of gsm_dlci and gsm_mux
structs. Cast the pointer value to (void *) to overcome this.
Fixes#35329
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch the interrupt controller address to lower case to avoid this
warning:
stm32f723e_disco.dts.pre.tmp:97.39-102.5: Warning (simple_bus_reg):
/soc/interrupt-controller@40013C00: simple-bus unit address format
error, expected "40013c00"
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
uarte_enable function was not supporting a case when async
api was enabled but instance did not use it. Added runtime
check for async instance presence.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Driver was failing when interrupt mode was enabled for given
instance but interrupt driven TX part was not used. In that
case uart was not disabled after sending a byte which resulted
in continuous interrupt triggering. Added check for
fifo_fill_lock which is set when uart_fifo_fill is used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to document the error codes, introduce a new reference section
describing the C standard library options available in Zephyr, along
with the definitions of the error codes.
At the same time move (most of) the content from the existing user guide
to the new API reference section, removing the need for a separate user
guide for it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a very simple check that verifies that new error numbers are added
according to the errno.h file in newlib, in order to maintain
compatibility with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit adds the missing `ARM_TRUSTZONE_M` config flag
from TrustZone-enabled cores on LPC55sxx board targets.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
The network layer previously decided to use the friend credentials if
there was an established friendship. During the friendship setup phase,
the friendship is not considered established until the LPN receives the
first friend poll. Before this happens, the LPN should send a friend
poll message, encrypted with the friendship credentials. This wrongly
gets encrypted with the master credentials.
Change the decision point to whether the LPN has selected a friend,
which happens after the friend offer, and before the friend poll. This
will remain set for the duration of the friendship.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This adds BT_MESH_SETTINGS_VA_PENDING to GENERIC_PENDING_BITS
as it should be stored by CONFIG_BT_MESH_STORE_TIMEOUT.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This bug was introduced in PR #31176, where setting's flags were
moved out from bt_mesh.flags to pending_flags.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When loaded via EFI, we obviously don't have a multiboot info pointer
available (we might have an EFI system table, but zefi doesn't pass
that through yet). Don't try to parse the "whatever garbage was in
%rbp" as a multiboot table.
The configuration is a little clumsy, as strictly our EFI kconfig just
says we're "building for" EFI but not that we'll boot that way. And
tests like arch/x86/info are trying to set CONFIG_MULTIBOOT=n
unconditionally, when it really should be something they detect from
devicetree or wherever.
Fixes#33545
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel objects that contain embedded synchronization structures like
spinlocks can't be palced in the (cached/incoherent) stack memory on
coherence platforms like intel_adsp.
The normal fix in a test case is just to make the offending data
static, but that's painful here because SYS_BITARRAY_DEFINE declares
two objects (i.e. you can't put a "static" in front of it as with
similar macros) and it happens to be used in this case to define local
variables with collliding names, so I'd have to go in and rename
everything.
And there's little value anyway. Bitarrays are nearly-pure data
structures and extremely unlikely to show up platform-dependent
behavior.
Fixes#35242
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Two testcases of semaphore failed in ADSP due to the timeout value
we got back from the child thread is invalid. We put the variable in
the bss instead of in a stack, trying to avoid this.
Fixes#34687
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The default behavior of the +KSRAT= command has
changed to not reboot the HL7800.
Adjust the command so the reboot takes place properly.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Simplified handling of runtime filtering that lead to removal
of LOG_CHECK_CTX_LVL_FILTER macro. Fixing multiply coverity issues
like CID 236013.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This was already implemented for firmware update packages.
For other opaque resources it failed to determine the target resource
id, which is now stored in the block_context.
Signed-off-by: Jan Buenker <jan.buenker@grandcentrix.net>
If the tests/net/socket/getaddrinfo is run in a board that has
Ethernet controller, then it is possible that it will interfere
the test if the Ethernet cable is connected. As the test only
needs loopback support to run, disable the Ethernet as it is
not needed by the test.
Fixes#34923
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
NPCX series ROM code changes the chip basic setting by firmware binary
header for loading the firmware from flash to RAM. Add the following to
improve the ec firmware header setting:
- Move the ECST which generates the firmware binary header to NPCX
common folder. All the following NPCX series chips can use this.
- Add ecst setting option in Kconfig.
Signed-off-by: Yuval Peress <peress@chromium.org>
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Fix regression in PPIs use for nRF52805 SoC, which has
fewer of them. And the regression was introduced in
commit e603b9d59e ("Bluetooth: controller: Adjust PPI
used for nRF51x and nRF52x").
Fixes#35204.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes compatibility with the Arduino bootloader reset mechanism when
using `west flash` on Darwin hosts.
stty is used to set the serial port in the bossac runner to 1200 baud on
Arduino ATSAMD21 bootloaders. The `-F` argument to stty is a GNU
coreutils addition, and thus it is missing from Darwin's BSD stty, so
change the flag to `-f` when we're not running on Linux.
On Darwin, set DEFAULT_BOSSAC_PORT to None and ask the user to select
one from a list of IOCalloutDevices reported by ioreg, modelled on the
get_board_snr from the nrfjprog runner. This is because serial port TTYs
are generated by the device driver, and therefore there is no safe
default.
Tested with an Arduino Nano 33 IoT board.
Signed-off-by: George White <me@galexite.uk>
add semaphores to ensure all services started before client query.
otherwise client query services may fail.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Z_ITERABLE_SECTION_ROM symbols were empty, meaning
that those symbols were not taking place in the linker script.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
A few mistakes in recent changes to this test:
There was a "LOCK_NO" (i.e. no locking!) case being exercised in
test_inc_concurrency, where three threads would race against each
other incrementing and decrementing a single count without
synchronization. And... it failed on cAVS. Because there was no
synchronization. Just remove.
The LOCK_IRQ (irq_un/lock()) case of the same test was was casting
taking a pointer to an integer (that stored the irq_lock() result) and
casting the pointer value to an integer instead of dereferencing it.
Also the workq test had a work item on the stack, which is forbidden
when KERNEL_COHERENCE=y
Fixes#34152
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Should not use -1 as an input parameter for unsigned int. Use zero
instead of -1 as invaild interrupt number to fix coverity warning.
Fixes#35146
CID: 235994
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Increase the default thread analyzer stack size. On ARM systems the
stack usage is higher with CONFIG_FPU enabled.
The default of 512 is not enough in this case and lead to stack
overflow.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This CL limits the compiler to consider the eSPI/LPC host wake-up
functions, such as npcx_host_disable_access_interrupt and
npcx_host_disable_access_interrupt, only if eSPI bus module is selected.
Otherwise, we will encounter compiler errors if the communication
between host and ec is via SPI, not eSPI/LPC bus.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This commit fixes the ADC driver flow. And add internal
reference voltage to ADC driver API. And correct the
data buffer that only need to store raw data.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
After i2c_reset, there is still no external pull-up I2C bus,
and finishing off the rest of loop causes the code to hang
indefinitely.
This patch fixes that if I2C bus is not available(No external
pull-up), dropping the transaction.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
1. Refine some testcases for testing some character output function.
2. Delete some negative testcases which will not invoke fatal error.
Fixes#33822Fixes#33803Fixes#33801Fixes#33800Fixes#33790
Signed-off-by: Ying ming <mingx.ying@intel.com>
When marking the reserved region at the end of virtual address
space, call virt_to_bitmap_offset() is not needed as we already
know the offset. So remove it.
Coverity-CID: 235930
Fixes#35160
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds a new test to verify the thread safety of the C
standard functions provided by newlib.
Only the memory management functions (malloc and free) are tested at
this time; this test will be further extended in the future, to verify
the thread safety and re-entrancy of all supported newlib functions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the lock inside the newlib internal `_sbrk`
function, which is called by `malloc` when additional heap memory is
needed.
This lock is no longer required because any calls to the `malloc`
function are synchronised by the `__malloc_lock` and `__malloc_unlock`
functions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a lock implementation for the newlib heap memory
management functions (`malloc` and `free`).
The `__malloc_lock` and `__malloc_unlock` functions are called by the
newlib `malloc` and `free` functions to synchronise access to the heap
region.
Without this lock, making use of the `malloc` and `free` functions from
multiple threads will result in the corruption of the heap region.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
-ENOSYS should be returned if the operation is not implemented. This
issue was causing some PM tests to fail, as -ENOSYS was expected.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
use atomic_clear_bit instead of atomic_test_and_set_bit
which will not return old value, and thus more coverity friendy
Fixing: #35154
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
When shell log backend was disabled fifo used only in
deferred mode was unconditionally flushed which lead to
errors in immediate mode where fifo was not present. On
the other hand, in case of LOG2_MODE_DEFERRED fifo (mpsc_pbuf)
was initialized in enable stage.
In order to clean things up, deferred v1 fifo flushing and
deferred v2 mpsc pbuf initialization were moved to fifo_reset
function which is called when shell log backend is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Arg can be double * and it is casted to int *. Coverity reports
it (CID 235943). Fixed by adding intermediate void * variable.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Mock backend is using 32 bytes for hexdump data and
only hexdumps with less data shall be compared against
expected one. Wrong operator was used and comparing
was performed only when hexdump size exceeded 32 bytes.
Spotted by Coverity CID 236015.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move assert check before array access to ensure that
negative index is not used in an array. Coverity CID 222151.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There was an accidental early return in the test. Spotted by
coverity CID 235986, 236006.
Additionally, test had to be fixed because early returned covered
issues.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When immediate mode is used CONFIG_LOG_BUFFER_SIZE is not defined
in kconfig. For proper compilation it is then defined in the test
file. Use positive value to please coverity which complains about
dead code when it is set to 0. Fixing CID 235961, 235965.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use gpio_pin_configure_dt() and gpio_pin_interrupt_configure_dt()
for drdy_gpio: they result in a more readable code.
Moreover, this commit includes also the fix for PR #35156
(i.e. CID 235979, add check for gpio_pin_configure() return val).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
File has next violations:
MISRA 11_9_a
Use NULL instead of literal zero (0) as the null-pointer-constant
MISRA 11_9_b
Literal zero (0) shall not be used as the null-pointer-constant
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Stop printing garbage when strings are terminated with more than one
zero byte.
Thanks Andy for the diagnosis (and the better adsplog.py)
Fixes#34492
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Update testcase test_fatal_on_smp(), and refine it and correct some
inappropriate usage such as unnecessary irq_lock(). This prevents
the error propagation to the later executing testcase.
Fixes#35200Fixes#35202
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The default status of UART should set disabled.
If UART needs to enable, it will be set in the
dts of board level.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Mass conversion of STM32 boards to dts based clock configuration has
left some minor whitespace issues. Fix these and some other whitespaces
in the affected files.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
OpenThread shell tries to execute commands without checking
if the shell has already been initialized. As a result, we
may hit an assertion in the OpenThread CLI code. It's
particularly painful in automated tests which spawn commands
very early in the firmware boot process.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
in test case test_mheap_threadsafe, we will create 3 threads using
same thread handler tmheap_handler, we should make thread_id
to be a local variable, otherwise tmheap_handler is non-reentrant.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Converts the bmg160 sample application to check the sensor device at
build time instead of runtime. This fixes a Coverity issue for logically
dead code introduced in commit 5832e588e3.
Fixes#35118
Coverity-CID: 235919
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the adxl372 sample application to check the sensor device at
build time instead of runtime. This fixes a Coverity issue for logically
dead code introduced in commit 72795c3e6c.
Fixes#35119
Coverity-CID: 235932
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The naming and documentation of the parameters was inconsistent with
their actual meaning and the implementation - enc_data and plaintext
were swapped.
Also, the parameter names in the file aes_ccm.c were completely
different from the ones in the header. Since all functions in the
header file are consistent in their parameter naming, I chose to make
the implementation follow the header and not the other way around.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
1. Refine some testcases for testing some libc functions, include
strlen(),strcmp(),strncmp(),memcmp(),memstr(),memcpy(),memmove()
strtol(),strtoul().
2. Change some code to make the code style consistent.
Fixes#33794Fixes#33810Fixes#33806
Signed-off-by: Ying ming <mingx.ying@intel.com>
The time necessary to resume from a power state has to be added to the
minimal residency time to check if there is enough time to go to a
particular state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The variable cnt is assigned twice in a row, so remove
the first one.
Coverity-CID: 235962
Fixes#35161
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The sockaddr address length was not initialized properly
when receiving packets.
Coverity-CID: 232698
Fixes#35159
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return value might be uninitialized if there was no
suitable IPv4 address found for the network interface.
Coverity-CID: 224630
Fixes#35158
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Resetting the dma_tx.buffer_length after the dma_tx.counter
calculation, instead of before.
We need to reset the buffer_length when the transmission is finished,
but in order to give the correct value to the uart_event_tx struct,
we use the dma_tx.buffer_length in the calculation of the
dma_tx.counter, used for the len of the event (number of bytes sent).
I found this problem, when I wanted to use the uart_event_tx.len for
freeing the used space inside a ring buffer (ring_buf_get_finish),
and it didn't work, I logged the values of the uart_event_tx struct,
and found out it always was 0, because the buffer_length was 0,
and the whole buffer was transmitted (stat.pending_length also 0).
Signed-off-by: Prema Jonathan van Win <jonathanvanwin@gmail.com>
Set TRACE_MODE to asynchronous and enable trace output pin.
Add soc_config.c in stm32 soc direcotry.
Fixes#34342
Signed-off-by: Andrés Manelli <am@toroid.io>
This commit loops on rx not empty only if rx_buf is enabled.
And if rx_buf is not enabled, it loops on tx empty status.
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
In case of the following sequence of UART events:
- UART_ENDRX
- UART_RXRDY
- TIMER_RXTIMEOUT
The application receives one more byte that was received,
due to RX counter alignment upon ENDRX event.
The proposed fix moves the RX byte counter alignment to the
RX timeout event handler.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
Follow-up: #34843
This commit is a followup to PR #34843.
The Zephyr subsys/tracing/Kconfig file has a
`depends on ZEPHYR_TRACERECORDER_MODULE` but that symbol is only
available when the module is part of the manifest.
This commit adds the second part of the comment:
https://
github.com/zephyrproject-rtos/zephyr/pull/34843#discussion_r628154265
To ensure all Kconfig symbols are defined.
Without this commit, users without TraceRecorder will see following
checkpatch error:
```
ERROR : Test KconfigBasic failed: Undefined Kconfig symbols:
warning: undefined symbol ZEPHYR_TRACERECORDER_MODULE:
- Referenced at subsys/tracing/Kconfig:35:
config PERCEPIO_TRACERECORDER
bool "Percepio Tracealyzer support"
select THREAD_NAME
select INIT_STACKS
select THREAD_MONITOR
depends on ZEPHYR_TRACERECORDER_MODULE && <choice>
```
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
New version of Systemview has Zephyr API description that did not match
what we had, align with what the tools provides and expand hooks to
support additional APIs. We now cover most kernel APIs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If we don't get a dev pointer from device_get_binding() we should
not dereference it. Just drop the name from the printk message
as in the future this is likely to use DEVICE_DT_GET().
Fixes#35112
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Treat ARMV7_M_ARMV8_M_MAINLINE similarly to ARMV6_M_ARMV8_M_BASELINE
and add arch_nop() calls to test_nop function.
Additionally add one arch_nop() call to fit comment and update
comments when required on other archs.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Using %s, without logstr_dup causes error when
CONFIG_LOG_DETECT_MISSED_STRDUP is enable.
Removing %s argument. LOG_FUNC_NAME_PREFIX_ERR can be used if prefix
is wanted.
Signed-off-by: Fredrik Gihl <fredrik.gihl@flir.se>
The required configuration is already selected by the Kconfig file for
all nrf devices that support TEMP peripheral.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
The TEMP sensor is not present in configurations like
nrf5340dk_nrf5340_cpuappns.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
The board moved to using APIC TSC Deadline Timer driver, which
removes the need for these configurations associated with
the older Apic timer driver (CONFIG_APIC_TIMER).
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
After the recent OpenThread upmerge, OpenThread changed its behaviour in
terms of CLI handling during commissioning procedure. OpenThread will
now call the registered CLI callback when it recieves the Discovery
message.
This resulted in a crash if no CLI command was executed by the user
before, because the `shell_p` pointer was only set in the command
handler. As it was not set to the actual shell backend instance, it
caused a crash (or assert if enabled) in the `shell_vfprintf()`
function.
Fix this by verifying the `shell_p` pointer in the
`otConsoleOutputCallback()` function before use. Additionally, set the
pointer to the most common UART shell backed (if enabled) in the
initialization function so that the initial messages from OpenThread are
not dropped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When destination address is a multicast address, select the source
address from non link local address first.
This means that for example if we are responding to mDNS query,
and we have both normal IPv4 and LL (169.254.x.y) address set for
the interface, we are now able to select the normal address instead
of the LL one.
Fixes#34409
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables the kconfig options so that the board would be
using boot and pinned linker sections.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This marks code and data within x86/ia32 so they are going to
reside in boot and pinned regions. This is a step to enable
demand paging for whole kernel.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds to the macros for device MMIO declaration so they can
be put into boot or pinned linker sections as needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds both boot and pinned sections to the linker
script for ia32. This is required for enabling demand
paging for kernel and data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows interrupt service routine to be declared with
the __isr tag so they can be placed in the correct linker
section. The first would be putting them into the pinned
section.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary bits for linker scripts and source code
to specify which symbols need to be pinned in memory. This is
needed for demand paging as some functions and data must reside
in memory all the time and cannot be paged out (e.g. paging,
scheduler, and interrupt routines for functionality).
This is up to the arch/SoC/board to define the sections in
their linker scripts as the pinned section may need special
alignment which cannot be done in common script snippets.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary bits for linker scripts and source code
to specify which symbols are needed for boot process so they
can be grouped together.
One use of this is to group boot related code and data so these
won't interval with other kernel and application for better
caching.
This is a must for demand paging as some functions and data
must be available during the boot process and before the memory
manager is initialized. During this time, paging cannot be used
so symbols linked in virtual memory space are unavailable.
This is up to the arch/SoC/board to define the sections in
their linker scripts as section may need special alignment
which cannot be done in common script snippets.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is exactly one function being defined with TEXT_START
macro so the x86-32 __start can appear at the beginning of
text section. Since no one else is using it, better remove
TEXT_START to simplify things.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The generic version of SECTION_VAR() is adding an extra space
during expansion before second argument (e.g.
SECTION_VAR(section, variable) => ".section. variable"
instead of ".section.variable") which would result in build
error. So remove the "##" in macro to fix this, and now it
will also behave the same as SECTION_FUNC().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is similar to Z_GENERIC_SECTION() but the resulting
section name has a period as prefix. This eases the need
to create a section name macro for both assembly and C.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add check to see that the GPIO devicetree node is actually enabled
before we build the PSoC6 GPIO driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On ARC some platforms utilize ICCM/DCCM for their "flash" and "ram"
storage. So we might get errors about overflowing one of these regions.
So treat them similar to how we treat FLASH and SRAM.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we try and build the MiV uart driver with interrupt support enabled
we get some errors related to code that hasn't been updated. Fix the
compile errors and add SERIAL_SUPPORT_INTERRUPT to the Kconfig to
hopefully catch these issues in the future
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix advertiser and scanning context being accessed on done
event when connection complete node rx that is processed
earlier has release them.
Relates to #30735.
Fixes#35013.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The ISN algorithm from RFC 6528 doesn't need Mbed TLS, but rather the
MD5 algorithm from Mbed TLS. Therefore select MBEDTLS_MD and
MBEDTLS_MAC_MD5_ENABLED in addition to MBEDTLS.
This fixes the following build failure when using TLS version 1.2 is
selected:
zephyr/subsys/net/ip/tcp2.c:1329: undefined reference to
`mbedtls_md5_ret'
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SRP client and server require ECDSA to be enabled otherwise the build
fails. Select OPENTHREAD_ECDSA for both OPENTHREAD_SRP_CLIENT and
OPENTHREAD_SRP_SERVER options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
OPENTHREAD_SRP_CLIENT and OPENTHREAD_SRP_SERVER are Thread features and
not Thread configuration, so move them to Kconfig.features.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The OPENTHREAD_MAX_CHILDREN and OPENTHREAD_MAX_IP_ADDR_PER_CHILD options
make not sense for a MTD device. Make them depend on OPENTHREAD_FTD.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now using CONFIG_MBEDTLS_USER_CONFIG_FILE instead of
CONFIG_MBEDTLS_USER_CONFIG_ENABLE for inclusion of user config file.
The Kconfig MBEDTLS_USER_CONFIG_ENABLE setting now now determines if
MBEDTLS_USER_CONFIG_FILE is visible.
This removes the problem of MBEDTLS_USER_CONFIG_FILE to be stuck on its
first value.
Users can use MBEDTLS_USER_CONFIG_ENABLE to get the prompt and define
their own value.
As the CONFIG_MBEDTLS_USER_CONFIG_FILE is default promptless then we can
use this setting directly as it will only be defined if another Kconfig
file specifies a default value to use, or user enables:
MBEDTLS_USER_CONFIG_ENABLE.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introducing MBEDTLS_PROMPTLESS and CUSTOM_MBEDTLS_CFG_FILE settings.
The MBEDTLS_PROMPTLESS can be set to true whenever configuration of
mbedTLS is done from a subsystem or module.
Such an example is OpenThread, which selects mbedTLS for some predefined
crypto settings using OPENTHREAD_MBEDTLS=y.
Unfortunately, extensive use of select can easily cause stuck symbol
syndrome making it harder than neccesarry for users to later reconfigure
as they easily get stuck in incompatible configurations.
Providing a MBEDTLS_PROMPTLESS allows such configurations to disable the
MBEDTLS prompt itself when selected but avoid stuck symbol if user
select another security configuration.
Similar with CUSTOM_MBEDTLS_CFG_FILE which ensures that user must
explicitly select this symbol before providing a custom mbedTLS config
file.
Today, other parts the Kconfig tree may set a default value for
MBEDTLS_CFG_FILE but that value is stuck and thus changed Kconfig
selections elsewhere in the tree will not adjust the value.
Introducing CUSTOM_MBEDTLS_CFG_FILE ensures it is known when the user
has provided the value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the prompt from MBEDTLS_USER_CONFIG_FILE unless
MBEDTLS_USER_CONFIG_ENABLE is true.
This fixes issues where other parts would specify a default value for
MBEDTLS_USER_CONFIG_FILE that would become stuck and not updated if
user re-configured the system using menuconfig.
Disabling the prompt ensures that only when a user specifically enables
MBEDTLS_USER_CONFIG_ENABLE and specify a custom user value in
MBEDTLS_USER_CONFIG_FILE the setting will be fixed.
Also updates the manifest with related change in the mbedtls project.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix manifest pointer for mbedtls to the main branch tip,
instead of the PR head.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With the updates to mbedTLS Kconfig it is now possible to update the
OpenThread security configurations by disabling the mbedTLS prompt and
avoid stuck symbol selection.
As part of this, the OpenThread security selection has been reworked
into a choice which ensures only a single security selection can be
chosen.
And the OPENTHREAD_MBEDTLS itself has been made promptless to ensure
other parts of the build system can select a specific OpenThread
security implementation and disable user selection, if the module or
sample require such behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This Mbed TLS configuration option was being selected based on a
non-existent Kconfig option, and hence would never be defined. v2.1 of
PKCS1 was published in 2003. Use of v1.5 has been deprecated since
2016, and should not be used in new or existing designs.
Enable the v2.1 version in any situation where RSA is used for
signatures. In the future, we should disable v1.5 entirely, but only
after all uses have been determined and possibly corrected.
No significant weaknesses have been found in v1.5, however v2.1 has a
significant security proof. However, v2.1 does require an entropy
source, which may be an issue in some embedded device situations (which
likely are problematic for other cryptographic reasons).
Signed-off-by: David Brown <david.brown@linaro.org>
The contents of mbedtls_ecdh_context have changed in newer versions of
the library. For now, we can work with the old version by adding a
configuration define. It is unclear how long this will continue to
work.
Signed-off-by: David Brown <david.brown@linaro.org>
Instead of exposing publicly the TF-M NS interface include
directories, we include them when we build relevant projects.
This is required, as the TF-M include directories contains
psa crypto sources that are also provided by the mbedtls
crypto module. The downside of this solution is that the
TF-M includes need to be added explicitly in each application
that uses TF-M APIs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Define the MBEDCRYPTO_PATH variable for the TF-M build,
so the latter can used a checked-out version of mbedtls,
instead of pulling an external tree during build time.
This will make Zephyr builds with TF-M must faster.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In Mbed TLS:
commit eccd88871767e2fba5f3a079cfdfcb77c376cf20
Author: Gilles Peskine <Gilles.Peskine@arm.com>
Date: Tue Mar 10 12:19:08 2020 +0100
Rename identifiers containing double-underscore
changes the name of a symbol we use. As part of upgrading to newer
versions of Mbed TLS, change the name of the symbol we use.
A better fix would be to not use this symbol at all, and perhaps define
our own symbol the same way this internal symbol is defined within the
library.
Signed-off-by: David Brown <david.brown@linaro.org>
Updates in CMakeLists.txt to reflect the restructuring
in the module directory. This also bumps mbetls version
to 2.26.0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the mbedtls module pointer, effectively
cleaning up the zephyr files from the module
repository and moving them to zephyr module
directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We move the Zephyr-specific CMakeLists.txt file into
the main Zephyr tree. We also move the zephyr_init.c
source file.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After enabled FPU context switch, one condvar testcase failed due to
the order of spawning thread cannot be guaranteed. Add a delay to
make sure the thread which initializing the condvar run first.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The newly added testcase test_nop failed the CI. Give RISCV more
arch_nop() instructions to archieve one cycle.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The AT instruction gives the corresponding physical address directly.
Much faster than the default implementation.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
STM32 internal temperature sensor driver.
This sensor can be used to measure the temperature of the CPU
and its surroundings.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
The nrf5340 cpunet based builds are excluded from this test and a new
platform bl5340_dvk_cpunet was added that needs to be excluded.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the power mgmt conversion of void *context to uint32_t *state this
driver got missed and shows build errors with power mgmt is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
new test failed which means we missed something in CI or the failing
platform changed after CI was initially run. skip it for now while we
investigate.
Do some minor cleanup in the metadata.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
File zephyr/lib/os/cbprintf_nano.c had operands with different types.
It caused Rule 10.4 violation.
Both operands of an operator in which the usual arithmetic conversions
are performed shall have the same essential type category.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
coding guidelines 10.4: casting operands to have same types
File zephyr/lib/os/cbprintf_nano.c had operands with different types.
It caused Rule 10.4 violation.
Both operands of an operator in which the usual arithmetic conversions
are performed shall have the same essential type category.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
removed cast to int
With the updates to mbedTLS Kconfig it is now possible to update the
OpenThread security configurations by disabling the mbedTLS prompt and
avoid stuck symbol selection.
As part of this, the OpenThread security selection has been reworked
into a choice which ensures only a single security selection can be
chosen.
And the OPENTHREAD_MBEDTLS itself has been made promptless to ensure
other parts of the build system can select a specific OpenThread
security implementation and disable user selection, if the module or
sample require such behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit removes the prompt from MBEDTLS_USER_CONFIG_FILE unless
MBEDTLS_USER_CONFIG_ENABLE is true.
This fixes issues where other parts would specify a default value for
MBEDTLS_USER_CONFIG_FILE that would become stuck and not updated if
user re-configured the system using menuconfig.
Disabling the prompt ensures that only when a user specifically enables
MBEDTLS_USER_CONFIG_ENABLE and specify a custom user value in
MBEDTLS_USER_CONFIG_FILE the setting will be fixed.
Also updates the manifest with related change in the mbedtls project.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Introducing MBEDTLS_PROMPTLESS and CUSTOM_MBEDTLS_CFG_FILE settings.
The MBEDTLS_PROMPTLESS can be set to true whenever configuration of
mbedTLS is done from a subsystem or module.
Such an example is OpenThread, which selects mbedTLS for some predefined
crypto settings using OPENTHREAD_MBEDTLS=y.
Unfortunately, extensive use of select can easily cause stuck symbol
syndrome making it harder than neccesarry for users to later reconfigure
as they easily get stuck in incompatible configurations.
Providing a MBEDTLS_PROMPTLESS allows such configurations to disable the
MBEDTLS prompt itself when selected but avoid stuck symbol if user
select another security configuration.
Similar with CUSTOM_MBEDTLS_CFG_FILE which ensures that user must
explicitly select this symbol before providing a custom mbedTLS config
file.
Today, other parts the Kconfig tree may set a default value for
MBEDTLS_CFG_FILE but that value is stuck and thus changed Kconfig
selections elsewhere in the tree will not adjust the value.
Introducing CUSTOM_MBEDTLS_CFG_FILE ensures it is known when the user
has provided the value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move the code responsible for aligning the flash write by writing fill
values - from stream_flash_buffered_write to flash_sync. This avoids
having to correct buf_bytes/buf_written after the write and thus
simplifies error handling.
This commit also fixes an issue where the write length passed to the
callback in flash_sync includes the fill length.
Signed-off-by: Jonathan Nilsen <Jonathan.Nilsen@nordicsemi.no>
The cache API currently shipped in Zephyr is assuming that the cache
controller is always on-core thus managed at the arch level. This is not
always the case because many SoCs rely on external cache controllers as
a peripheral external to the core (for example PL310 cache controller
and the L2Cxxx family). In some cases you also want a single driver to
control a whole set of cache controllers.
Rework the cache code introducing support for external cache
controllers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Record benchmark results into a CSV file that can be used for tracking.
The data will be available in recording.csv in the build directory.
For example:
cat recording.csv
metric,cycles,nanoseconds
Average thread context switch using yield,11654,11654
Average context switch time between threads (coop),21149,21149
Switch from ISR back to interrupted thread,4928,4927
Time from ISR to executing a different thread,3872,3871
Time to create a thread (without start),4224,4223
Time to start a thread,10784,10783
Time to suspend a thread,10400,10399
Time to resume a thread,10688,10687
Time to abort a thread (not running),1536,1535
Average semaphore signal time,3424,3424
Average semaphore test time,1344,1344
Semaphore take time (context switch),12736,12735
Semaphore give time (context switch),17568,17567
Average time to lock a mutex,1632,1632
Average time to unlock a mutex,4738,4738
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add test cases of direct interrupt for arch x86 and posix.
We register two direct interrupt at build time, then triggering
interrupt and check if ISR handler has executed or not. We also
check irq_enable and irq_disable works.
Why we add an extra compiler option "-mgeneral-regs-only" to make
it works in arch x86. because there might be some existing x87
instructions executing inside interrupt context.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add test cases of regular interrupt for arch x86. This tests basic
functionailty of IRQ_CONNECT(), irq_enable(), irq_disable(),
irq_lock(), irq_unlock().
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add a test case to test arch interface arch_nop(), the main focus here
is for coverage of the code. arch_nop() is a special implementation
and it will behave differently on different platforms. By the way, this
also measures how many cycles it spends for platforms that support it.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If thread names are enabled, set them up so we can get nice tracing
output and know which thread is which.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for new tracing macros in test backend. Move header from
sample into the subsystem and make it available for general testing with
any application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds generic trace hook macros for inserting trace hook for
function entry, exit, blocking, and object initialization
with a variable number of arguments (objects, return values,
etc.). Utilizing macro concatenation these macros produce
trace hooks of a similar format to the old trace system
with SYS_TRACING_OBJ_FUNC(k_thread, switched_in) being
turned into sys_trace_k_thread_switched_in() by the
preprocessor. Although these macros still rely on the manual
definition of each unique trace hook in tracing.h, the benefit
of not directly calling those is that we can enable/disable
trace hooks based on object type (k_thread, k_sem, etc.)
through the preprocessor while providing the ability of adding
type specific runtime trace processing similar to
SYS_TRACING_OBJ_INIT.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In a multi-instance driver it may happen that on some h/w
one device should use interrupts and a second device should use
polling mode. So, CONFIG_LSM6DSO_TRIGGER is not enough to discriminmate
if interrupt inizialization routine should be called or not; the choice
is now based whether the "irq-gpios" property is present in the DT
for that particular instance or not.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move ctx structure from struct data to struct config, so that
it can be filled at compile time and we could get rid of the bus
init routines.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
NPCX clock has some limitations about the frequency range &
synchronization between core clock & other clocks. Add build assert to
check whether NPCX clock setting correct. This also fixed soc_clock.h
to consist with datasheet.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Follow-up: #34842
This is a follow-up commit that ensures relevant version information
regarding the build is located together as discussed in #34842.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If user is specifying `-DBUILD_VERSION=<value>` then the proper way to
test is using `NOT DEFINED BUILD_VERSION`.
The difference between `NOT DEFINED BUILD_VERSION` and
`NOT BUILD_VERSION` is that a user specifying `-DBUILD_VERSION=0` will
result in `NOT BUILD_VERSION` becoming true, whereas
`NOT DEFINED BUILD_VERSION` would be false, which is the correct
behavior here, as the user actually provided a specific BUILD_VERSION.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Several functions and macros have been replaced with new ones that
conform to current naming conventions, or provide more functionality,
mostly through using new representations for delayable work. Mark
these functions deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Legacy k_work API has been marked deprecated, but it is still present
in tree and should be tested. Avoid CI warnings by disabling warnings
on use of deprecated API within the test source files.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This sample turn on/off the LED every two seconds and then sleeps. When
the LED is on we don't want the system putting it down when goes to
sleep. So, just setting this device as busy.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Avoid confusion with device runtime idle pm states and just use device
pm states.
This simplify the code a little bit and prepare the ground for having
a better definition of device pm states. Right now this code needed to
hijack two transitional states to not break the current code logic but
the goal is avoid it and have everything in one single place.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add 3 test cases to test offload job from isr, include:
1. test_isr_offload_job_multiple()
Validate the offloaded work executes immediately or not depends on its
priority, and it offloads to different k_work.
2. test_isr_offload_job_identi()
Validate the offloaded work executes immediately or not depends on its
priority, and it offloads to the identical k_work.
3. test_isr_offload_job()
Use dynamic interrupt instead of irq_offload() to verify the offloaded
work.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add an testcase. Creat two preempt threads with equal priority to
atomiclly access the same atomic value. Because these preempt
threads are of equal priority, so enable time slice to make
them scheduled. The thread will execute for some time.
In this time, the two sub threads will be scheduled separately
according to the time slice.
Signed-off-by: Ying ming <mingx.ying@intel.com>
If calling function k_thread_resume() when the thread is not suspend,
it takes no effect. This change improve coverage of function
k_thread_resume() in sched.c
Signed-off-by: Ying ming <mingx.ying@intel.com>
If the modem drivers are built on a 64-bit platform we get errors with
the logging code due to use of size_t. Update to use %zX to handle this
correctly between 32-bit and 64-bit platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Devices may be initialized but started powered down for this reason
is necessary to power a device on if requested even if in pre-kernel
state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Device pm runtime was using semaphore to protect critical section but
enable / disable functions were waiting on the semaphore. So, just
replace it with a spin lock.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The sync API was using k_poll_signal and in certain conditions is
possible multiple threads waiting on a signal leading to an undefined
behavior.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Currently when the system goes to sleep it asks *all* devices that
support PM to suspend or go to a low power state, and the system wakes
up it put *all* suspended devices in active state, even if a device
was already suspended and not being used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Cleanup along the same lines as the last change to APL/up_squared.
Make sure all hardware configuration is at the board level where it
belongs and not in the soc, don't play games with defaulting timer
drivers. Unify the configuration where possible and make it clearer
which setting goes with which driver.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The addition of a timer driver made a messy situation worse. Move
board-level configuration like clock rates and dividers into the board
and don't try to default it in the soc. Make it clear which kconfig
goes with which driver. Likewise don't try to do driver selection in
the soc, the board (or app) is in a better position to choose.
Also clean up and better unify the up_squared 32/64 bit settings.
Really only CONFIG_BOARD_NAME needs to care about the difference
between these devices.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
First, this test is a little suspect. It's assuming that the value
returned from k_cycle_get_32() represents the time since system
power-on. While that's an obvious implementation choice and surely
often true, it's definitely not the way we document this API to the
arch layer. It's perfectly legal for a platform to return any value
as long as the counter is increasing at the correct rate. Leaving for
now as there's no other way to test CONFIG_BOOT_DELAY, but this will
likely be coming back to confuse us at some point.
Regardless, that convention holds for x86 devices using any of the
existing drivers. But on an EFI PC using the TSC counter as the clock
source: (1) the counter is running at 1-2 GHz and (2) the time to get
through an EFI BIOS and into Zephyr is routinely 10+ seconds,
especially on reference hardware. The poor 32 bit API will roll over
several times, and effectively be a random number by the time it
reaches this test.
Just skip this test with fast counter.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Modern hardware all supports a TSC_DEADLINE mode for the APIC timer,
where the same GHz-scale 64 bit TSC used for performance monitoring
becomes the free-running counter used for cpu-local timer interrupts.
Being a free running counter that does not need to be reset, it will
not lose time in an interrupt. Being 64 bit, it needs no rollover or
clamping logic in the driver when presented with a 32 bit tick count.
Being a proper comparator, it will correctly trigger interrupts for
times set "in the past" and thus needs no minimum/clamping logic. The
counter is synchronized across the system architecturally (modulo one
burp where firmware likes to change the adjustment value) so usage is
SMP-safe by default. Access to the 64 bit counter and comparator
value are single-instruction atomics even on 32 bit systems, so it
beats even the RISC-V machine timer in complexity (which was our
reigning champ for "simplest timer driver").
Really this is just ideal for Zephyr. So rather than try to add
support for it to the existing APIC driver and increase complexity,
make this a new standalone driver instead. All modern hardware has
what it needs. The sole gotcha is that it's not easily emulatable
(qemu supports it only under kvm where they can freeload on the host
TSC) so it can be exercised only on hardware platforms right now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add mimxrt685_evk_cm33 board to the platform_allow list
for the littlefs sample application.
Signed-off-by: Saurabh Jagdhane <saurabh.jagdhane@nxp.com>
Move LUT to driver.
Update CMake to include SoC specific driver.
Fix mimxrt685_evk LUT header spacing.
Signed-off-by: Saurabh Jagdhane <saurabh.jagdhane@nxp.com>
Enable FlexSPI NOR flash driver with XIP build options.
Configure FlexSPI pins, update board documentation.
Add FlexSPI NOR flash dts node for mimxrt685_evk.
Enable flash storage by adding partition to dts file.
Using last 1MB for storage, and reserving 63MB for code.
Signed-off-by: Saurabh Jagdhane <saurabh.jagdhane@nxp.com>
Adding Reset and Write-protect pins initialization during AT45 driver
start-up. Usually these pins are driven high when not used.
The AT45 device incorporates an internal power-on reset circuit, so
there is no initial on-off reset sequence.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
For ARCv3 the register is fixed to r30, so we don't need to
configure it at compile-time.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Increase stacks required for ARCv3 64-bit CI to pass.
The CMSIS stacks are for programs in samples/portability
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv3 64 bit processors doesn't have Zero Delay Loop
(also named Zero Overhead Loop, ZOL) mechanism. Add kconfig
option to remove ZOL register save/restore so the code
can be build for both ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv2 32 bit and ARCv3 64 bit share the same vector table
structure but with different vector entry size (32 and 64 bit),
so we can easily make vector table bit agnostic.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Mark the places where we intentionally use st instead of STR for
code common for ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
When we accessing bloated structure member we can exceed u9 operand
in store instruction. So we can use _st32_huge_offset macro instead
for 32 bit accesses
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Rewrite ARC assembler code with asm-compat macroses, so the same
code can be used for both ARCv2 (GNU and MWDT assemblers) and
ARCv3 (GNU assembler)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Reuse ARCv2 headers [where it is possible] for ARCv3.
In this commit we simply allow to use them for ARCv3, we'll
move it to proper folder and rename them [where it is required]
in the upcoming cleanup patch.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Split ARC sys-io.h implementation for two part:
* AUX reg accessors - ASM based which and valid for ARCv2
* MMIO accessors - writen in C and valid for both ARCv2 and ARCv3
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add asm-compat macroses to be able to co create assembler code
which works and can be build for both ARCv2 and ARCv3 ISAs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Do basic preparations for building code for ARCv3 HS6x
* add ISA_ARCV3 and CPU_HS6X config options
* add off_t type support for __ARC64__
* use elf64-littlearc format for linking
* use arc64 mcpu for CPU_HS6X
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
As of today we check against CPU_ARCHS config option which may be
related to different HS CPUs (i.e. ARCv2 HS, ARCv3 HS, etc...).
Let's check against exact HS CPU type (CPU_HS3X) as we do EM
processors.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
To keep compatibility between the old GPIO API implementation and a new
one introduced in the Zephyr 2.2.0 release the gpio_pin_configure()
function was accepting interrupt flags. In the new API implementation
interrupt flags are only accepted by gpio_pin_interrupt_configure()
function.
This temporary support for INT flags in gpio_pin_configure should have
been removed in the Zephyr 2.4.0 release.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The shared interrupt controller depended on interrupt-cell sense
to inialize the interrupt using IRQ_CONNECT.
Forward the "sense" property only conditionally to be able to
use the driver all drivers that don't define it.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The size of the array holding the client information is determined
from the number of dt supports dep ordinals.
Finally remove the Kconfig symbol for the number of clients.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The intc_shared driver used kconfig to set the number of clients.
This commit changes the driver to determine the number of clients
per instance using supports ordinals information from device tree.
Leave the kconfig symbol for the number of clients, it now only defines
the array size in driver data and therefore an upper limit of how
many clients can be defined in dts.
It will be removed later with changes of driver data struct.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The intc_shared driver until now had the possibility to enable
up to two instances of the driver using the symbols SHARED_IRQ_0
and SHARED_IRQ_1.
This commit removes those Config options, and instead instantiates the
driver using DT_INST_FOREACH_STATUS_OKAY macro.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This uses bitarrays for allocating and deallocating virtual
addresses with k_mem_map() and k_mem_unmap(). This will
allow us to reuse virtual addresses.
Fixes#28900
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_page_phys_get() to translate mapped
virtual addresses back to physical addresses.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new function prototype for arch_page_phys_get()
which will be used to translate mapped virtual addresses back
to physical memory addresses. This is needed for the future
k_mem_unmap() function which requires this to find
the corresponding page frame. It is faster to look through
the page tables instead of doing linear search of the page
frame array.
A weak function is provided in case arch_page_phys_get()
is not implemented at the arch level. This simply goes
through all the page frame and find the one which has
mapped to the virtual address.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When we start allowing unmapping of memory region, there is no
exact way to know if k_mem_map() is called with guard page option
specified or not. So just unconditionally enable guard pages on
both sides of the memory region to hopefully catch access
violations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a test for z_phys_unmap() to make sure that memory
can be unmapped and is no longer accessible.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This provides a counterpart to z_phys_map() which can be used
to temporary map memory region during boot process, and
subsequently discards the mapping.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This waits a bit for NRU eviction algorithm (which is the default)
to work its magic to clear the access bit of physical frames.
This increases the number of clean pages which can be evicted,
to make sure the number of clean pages evicted is not zero, which
would cause an assertion.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The test itself is highly sensitive to the size of the kernel
image. When the kernel gets larger, the number of pages used by
the backing store needs to shrink. So here this is.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In z_mem_manage_init(), z_free_page_count is only manipulated
after all reserved pages are marked, and will reflect
the actual number of page frames being added to the free page
frame list. Manipulating z_free_page_count before this is
going to mess up the accounting, so remove the code to
decrement z_free_page_count in arch_reserved_pages_update()
under x86.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some tests to make sure sys_bitarray_*() are
working correctly.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces bit arrays as a new data type. This is different
than sys_bitfield as it is working on raw arrays of 32-bit
data. The bit arrays encode additional data inside the struct
to avoid going beyond the declared number of bits, and also
provides locking.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On RISC-V 64-bit, GCC complains about undefined reference
to 'ffs' via __builtin_ffs(). So implement a brute force
way to do it. Once the toolchain has __builtin_ffs(),
this can be reverted.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit enhances the CAN API test. In the send_receive tests,
we are using two filters and frames at the same time to check
if the frame gets dispatched to the correct filter.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Implementation of the Bosch M_CAN IP driver.
This driver is just the base for a specific SoC implementation.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
We do not want those .bin files, also remove intermediate files leading
to the final ELF, those are huge.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the missing .cached section on cAVS 2.0 and 2.5 to fix
compiler warnings.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
PLATFORM_RESET_MHE_AT_BOOT and
PLATFORM_DISABLE_L2CACHE_AT_BOOT have to be defined on cAVS 1.8
too, without them secondary cores cannot be used.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
uncache_to_cache(), cache_to_uncache() and is_uncached() macros
are currently unused in Zephyr, besides the former two are
dangerous because they add and subtract an offset instead of
masking and unmasking a bit, which can lead to wrong addresses
if applied repeatedly. Remove these macros for now, we can
re-add them later if needed in their fixed versions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
work_timeout() is a function, a statement like "(void)work_timeout;"
has no effect.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently only cAVS 1.5 Kconfig selects ARCH_HAS_COHERENCE,
which is wrong. cAVS 1.8, 2.0 and 2.5 have to select it too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
- bootutil_public: allow to confirm padded image without
copy-done flag
- Configure mimxrt106x_evk boards
fixes#34683
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Restrict sample execution in CI to boards that have
"st,stm32-lptim" enabled so we're sure it is a STM32 target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The energy consumption on nrf52840 is unnecessarily high when
CONFIG_NORDIC_QSPI_NOR is used due to Anomaly 122. The nrf_qspi_nor
driver is unitialize after QSPI usage and initialize before using
it again.
Semaphore objects are used to allow multiple threads exclusive access
and efficient usage.
The main assumption made was that all QSPI API is stateless, in the
sense that it is not required to store any peripheral state before
uninit. Also, the QSPI driver was supposed to be synchronous, except
for the erase operation, in which the nrf signals its start, instead of
its end. While the flash is performing the erase, an uninit followed
by an init doesn't work. For that reason, polling is done before
every uninit.
Tests were made with a simple LittleFS application in a custom board
using flash MX25R3235F and another with the LittleFS flash sample
using nrf52840 DK that has a MX25R6435F. Current consumption dropped
from 630 uA to ~10uA in both cases.
Signed-off-by: Rodrigo Brochado <git.rodrigobrochado@gmail.com>
Previously to this commit, nothing was done to restore the bus to an
healthy level.
However, I2C devices sometimes needs help to recover from an aborted
transaction.
Therefore, we now add a call to nrfx_{twi, twim}_bus_recover().
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
The k_work handler cannot manipulate the used k_work. This means
that it is not easy to cleanup the net_pkt because it contains
k_work in it. Because of this, use k_fifo instead between
RX thread and network driver, and between application and TX
thread.
A echo-server/client run with IPv4 and UDP gave following
results:
Using k_work
------------
TX traffic class statistics:
TC Priority Sent pkts bytes time
[0] BK (1) 21922 5543071 103 us [0->41->26->34=101 us]
[1] BE (0) 0 0 -
RX traffic class statistics:
TC Priority Recv pkts bytes time
[0] BK (0) 0 0 -
[1] BE (0) 21925 6039151 97 us [0->21->16->37->20=94 us]
Using k_fifo
------------
TX traffic class statistics:
TC Priority Sent pkts bytes time
[0] BK (1) 15079 3811118 94 us [0->36->23->32=91 us]
[1] BE (0) 0 0 -
RX traffic class statistics:
TC Priority Recv pkts bytes time
[0] BK (1) 0 0 -
[1] BE (0) 15073 4150947 79 us [0->17->12->32->14=75 us]
So using k_fifo gives about 10% better performance with same workload.
Fixes#34690
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Following commits will remove k_work from net_pkt, so convert
PPP L2 to use k_fifo when sending PPP data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Following commits will remove k_work from net_pkt, so convert
6locan L2 to use k_fifo between application and TX thread, and
driver and RX error handler.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Puts all filter in common section and fix filters. Platforms in
integration_platforms must also be allowed first, otherwise the tests
will never run.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding static to local functions. Using void * for %p argument
which often triggered compilation warning.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Test was failing because of uninitialized variable and wrong
pointer being used (pointer to char).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes for C++ includes:
- avoid calling static inline template function in static
assert on certain platforms which consider it non const expression
- Add 0 to variable before calling C++ argument storing function
to promote a variable.
Fix for coverity:
- avoid using sizeof(n + 0) by using local variable (gcc extension)
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Increase the number of works to help PR throughput as we get
close to code freeze. Will revert this back after code freeze.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixed check condition for GPIO pin number.
This check is done
before reading or writing value for the pin.
Verified on ehl_crb.
Signed-off-by: U Divya <u.divya@intel.com>
Added support for GPIO driver for Intel Elkhart Lake
board.
The GPIO driver will support pin value read/write operations,
pin direction and interrupt configuration. ACPI enumeration
support and support for different GPIO communities is also
present.
Verified on ehl_crb.
Signed-off-by: U Divya <u.divya@intel.com>
Contrary to the documentation giving a semaphore while an IRQ lock is
held does not release the lock and give control to another thread.
The release-lock behavior is observed only if the lock-holding thread
sleeps.
However the opportunity to reschedule will have been lost so it may be
necessary to explicitly yield to allow the higher-priority thread to
be serviced.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
ADC emulator is designed to be used in tests on native_posix board. It
supports 1-16 bit resolution range and all GAINs from enum adc_gain.
Reference voltages and number of emulated channels are set through dts.
Using special API from drivers/adc/adc_emul.h it is possible to set
constant voltage value returned by given ADC channel or set custom
function which allows to simulate complex output.
Also reference voltages can be changed in runtime using the API.
The CL also includes:
- Add adc definitions of ADC emulator in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
- Add test for ADC emulator API in tests/drivers/adc/adc_emul/
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
Replace the use of LL_FEAT define with ll_feat_get() so that
feature set value can be updated at runtime with host
feature bit values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
add dma support to adc driver
add HW trigger dma support
using new dma api to request dma channel
tested on frdm_k82f and frdm_k64f
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
add adc_dma test application
enable periodic_trigger flag for adc edma
enable for frdm_k64f and frdm_k82f
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
add dts bingings for dma usage
add dts support for adc with edma and hwtrigger
add a periodic_trigger feature to dts
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Adds a Babblesim test suite for the volume control service
and client, that exercises the entire API and most of the
VCS functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the volume control service (VCS) and
client, The implementation supports and uses the
Audio Input Control Service (AICS) and
Volume Offset Control Service (VOCS) secondary services.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix radio event scheduling stall when using BT_CTLR_LOW_LAT
feature.
Performing a Connection Update Procedure on an ACL
connection while simultaneously having continuous scanning
causes the ACL connection to drop in nRF51 series which uses
BT_CTLR_LOW_LAT by default.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a release note entry for the new Zephyr boards
supported in TF-M in Zephyr v.2.6.0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
qemu arc has limited support for DIV/REM, no DIVZERO exception
throw, so we need to skip trigger_fault_divide_zero test case.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The USB HID class API offers the possibility to register callbacks
for Get/SetIdle, Get/SetProtocol to the application.
Rules for these callbacks are neither obvious nor documented.
This patch remove this possibility to register Get/SetProtocol
and Get/SetIdle callbacks for the following reasons:
The possibility to call unknown application code while processing
control requests should be avoided or reduced to a minimum.
The Get/SetProtocol callbacks are redundant and do not provide any
additional value since the way to inform the application
about the change of the protocol exists via the callback
hid_protocol_cb_t protocol_change.
The core provides implementation to handle Get/SetIdle requests and
on idle reports. If this is not suitable in any way then the application
should implement everything itself.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update the STM32 HAL to fix the SPI pin configuration in order to reduce
power consumption in STOP mode.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added Kconfig option to configure the maximum Broadcast and
Synchronized Receiver ISO PDU length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Usage of k_work object from within net_pkt results in undefined behavior
in case when net_pkt is deallocated (by net_pkt_unref()) before work has
been finished.
Use per socket k_work object (sock->send_work) to submit send work and
put net_pkt objects onto k_fifo (sock->tx_fifo). Add a helper function
esp_socket_queue_tx() for that, which will make sure that packets are
enqueued only when send work handler will be successfully submitted (so
that all packets are consumed/dereferenced).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit allows a subsystem to specify additional CMake flags to be
given to the TF-M build.
The additional CMake flags can be provided through the TFM_CMAKE_OPTIONS
property on the zephyr_property_target.
Using the zephyr_property_target allows Zephyr modules to append extra
TFM_CMAKE_OPTIONS regardless of the CMake processing order.
It splits the ExternalProject_Add into a two step process with the CMake
invocation executed using add_custom_target() and the build process
using ExternalProject_Add(). The reason for this split is because CMake
generator expressions passed through ExternalProject_Add to CMake will
quoted so that `$<TARGET_PROPERTY:<tgt>,<prop>>` becomes
`"-DFOO=bar -DBAR=foo"` instead of `-DFOO=bar -DBAR=foo` which again
results in CMake failures.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add SCIF bus initial support to Renesas R-Car SOC series.
SCIF1 is used as main serial and shell output on R-Car H3 board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This patch add support for polling based UART
on the Renesas R-Car SCIF (Serial Communication Interface
with FIFO)
This hardware block can be found on various Renesas R-Car
SoC series.
It allows to get console on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Renesas has Serial Communication Interface with
FIFO (SCIF) hardware block which allow asynchronous and
synchronous serial communication. The SCIF has 16-stage FIFO
buffers separately for transmissions and reception.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
The amount of needed done events changes when using the "must expire"
logic.
Make the amount vendor configurable (via ull_vendor.h)
Defaults to the original amount of 3.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Avoid calling PPI driver when enhanced poll functionality is
disabled. Fixing a case when driver failed to compile when
enhanced poll is disabled for all instances.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The HCI specification creates additional complexity to allow this
configuration:
- When a connection gets established, we need to know which
identity the HCI_LE_Connection_Complete event corresponds to.
- The identity is a property of the advertising set.
Therefore we need the advertising handle.
- The advertising handle is part of the
HCI_LE_Advertising_Set_Terminated event and is not part of
the HCI_LE_Connection_Complete event. Therefore
the information of both events needs to be combined.
By spec the LE_Connection_Complete comes first. Therefore we cache
this event until the identity is available.
The event is only cached when a connection gets established as
that is the only case where we need to resolve the identity.
As the caching requires more resources, it is only enabled if the
application requires multiple advertising sets and multiple
identities.
The host maps the HCI_LE_Advertising_Set_Terminated event with
the HCI_LE_Connection_Complete event by comparing the connection
handles.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Commit 233149eec5 moved flash sram nodes
under /soc for various nordic ICs, but the indentation isn't right for
52811. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
UART0, TWI0, and SPI0 have different peripheral IDs (2, 3, and 4
respectively) on this SoC and therefore should not be mutually
exclusive to use.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix bug where if `CONFIG_BOOTLOADER_MCUBOOT` is set sign.py incorrectly
shows warning `CONFIG_BOOTLOADER_MCUBOOT is not set to y...`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
The Kconfig option SHELL_BACKEND_SERIAL had been defaulting to y,
causing shell to block mcumgr from processing serial input.
Fixes: #34670
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
With the change to use GPIO_DT_SPEC_GET_OR a number of platforms
failed to build these samples. This was due to the GPIO drivers not
being enabled by default. Add CONFIG_GPIO=y to the prj.conf to fix
the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The devicetree test will not link the hsdk platforms as
when CONFIG_GPIO=y this enable CONFIG_I2C as the board utilizes
a GPIO expander over I2C. So we exclude building this test on
the hsdk platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board has an I2C GPIO expander on it. A number of samples utilize
LEDs on GPIOs for testing purpose so it makes sense to enable the GPIO
expander (CONFIG_GPIO_CY8C95XX) driver when CONFIG_GPIO has been
enabled. We have to also enable I2C since the expander is connected
over an I2C interface.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In an ideal world, good CIs make it very clear what exact git versions
are getting built. However:
- Zephyr is (re-)used in many projects and they cannot all be expected
to have ideal CI.
- CI with multiple git repos is complex (#34713) which makes the world
an even less ideal place: much more chance for some git versions to be
missing.
- Many developers don't realize that Github and other CIs do not test
pull/12345/head but the moving target pull/12345/merge instead. While
not resolving pull/12345/merge completely (maybe another day), this
commit provides at least evidence that pull/12345/head is NOT the
commit tested.
So the addition of the following line in the logs is a very small price
to pay that can save enormous amounts of time when trying to understand
some obscure build failures.
-- BUILD_VERSION=zephyr-v2.5.0-2957-g6230b5bb66bc
Note this obviously does not provide any git information when
BUILD_VERSION is overriden but it does not hurt either in this case:
knowing BUILD_VERSION was overriden is also useful.
The "BUILD_VERSION is left undefined" message was just wrong in
the (unlikely) case `git describe` printed something while also
failing. Remove it; it's so much simpler to just print $BUILD_VERSION
and give the direct, unfiltered information.
Note this simplification is also a partial revert of 1b80f00f56
which threw the entire git warnings "baby" with some obscure duplicate
1.13.0 "bathwater" that is not relevant any more and that I guess barely
anyone noticed even at the time.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add the tfm tag to the arm_thread_swap_tz test,
since the test is running with TF-M by default.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TF-M NS interface is initialized by the TF-M module
code, so it does not need to be re-initialized in the
sample code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Synchronize TF-M to the latest ustream main branch.
This brings TF-M support for BL5340 Dev Kit in Zephyr.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In some cases, VddIO2 is required to get port working.
Looking in details, VddIO2 should be set on start up
but not toggled on/off in PM use cases.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Implement power mgmt hooks to support PM_DEVICE and
PM_DEVICE_RUNTIME.
In case of PM_DEVICE_RUNTIME, clock is requested for bank writes
so it is requested before configuring and released only if pin
is not configured as output.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Prepare for Cortex-R MPU support by moving the MPU headers to the
aarch32 common directory. Add compat headers to ease the transition for
the Cortex-M external modules.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Added function ull_conn_iso_resume_ticker_start to enable LLL ISO
peripheral/central to start the one-shot resume ticker.
At timeout the common lll_resume handler is called, and based on the
LLL state, the peripheral/central is able to resume the CIG event.
The resume acts exactly like a normal event resume from the prepare
pipeline, with the exception that the LLL must provide specific
lll_event instances.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add BT_CTLR_ISO_TX_BUFFER_SIZE depends on Broadcast ISO
and/or Connected ISO feature being enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename LE Read Buffer Size v2 struct members to related to
Bluetooth Specification use Length and Number terminology.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Recently WiFi ESP32 driver (utilizing WiFi radio in ESP32 SoC) was
introduced into drivers/wifi/esp32/ and it already caused confusion as
there was existing drivers/wifi/esp/ directory for ESP-AT
driver (utilizing external WiFi chip, by communicating using AT commands
from any serial capable platform). So question has arisen whether it is
good to merge both, while they are totally different drivers.
Rename ESP-AT driver to be placed in drivers/wifi/esp_at/, so that it is
easier to figure out difference between "esp32" and "esp_at" just by
looking at driver name. Rename also DT compatible and all Kconfig
options for the same reason.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Only accumulate latency when event has not been prepared but
has been aborted while being enqueued in pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
smp_shell_process() is called only once after receiving new bytes over
shell. If multiple MCUMGR frames were received over UART one after the
other, then calling smp_shell_process() resulted in consuming only the
first one. All subsequent frames were not processed unless there was
some more RX traffic.
Process received frames in smp_shell_process() in a loop until there is
no frame left. This will make sure that received packets are not stalled
waiting for more RX traffic to trigger processing again.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Adding the Circuit Dojo nRF9160 Thing Plus device tree definitions.
Both secure and non secure targets.
Adding LIS2DH to nRF9160 Feather
definitions. Updating flash to W25Q32JV.
Signed-off-by: Jared Wolff <hello@jaredwolff.com>
Sometimes it may be needed to know device name when proxy feature is
enabled.
This commit adds an option to include device name in scan response.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
These should run for minlibc configured with
CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE=0. In all other cases normal
testsuite should run.
How preprocessor #if's were put previously, some configurations,
e.g. prj_newlib.conf, had the testsuite completely skipped.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is an update to #34289.
When using CMake <=3.18 an interface library may not use the property
SOURCES.
Therefore, if an interface lib is added to the list of ZEPHYR_LIBS, then
CMake <=3.18 will raise the following error:
```
CMake Error .... (get_property):
INTERFACE_LIBRARY targets may only have whitelisted properties.
The property "SOURCES" is not allowed.
```
Therefore the check has been reworked into two steps.
First ensure all libs are static, and if they are, then check if they
are empty and not imported.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
nrfx 2.5.0 release includes the patch in the nrfx_twim driver that
fixes the driver behavior for zero-length transfers. No need to keep
the same fix in the shim layer.
This effectively reverts cb86a2b306.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Converts the sample to the new k_work API, and introduces a blink
boolean to catch cancel failures.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This commit implements the OpenThread APIs to configure Enhanced-ACK
Based Probing in radio for a specific Initiator. This is needed for
Link Metrics functionality.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Remove reset pin requirement from devicetree as this
is not required for modem functionality, and is not
used in the driver anyways.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
As the nucleo_g474re was converted to define clock properties
in devicetree, this commit makes the ncecessary changes such that
the ncecessary test properties are still applied.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The request id is given by the DMA request MUX id which start at offset
1 and are vaid until req_nb + gen_nb.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add nucleo_g431rb to spi_loopback test using spi async configuration.
Such that tests do not only run with syncronous spi configuration
(nucleo_g474re), but also with the asyncronous configuration.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
For dmamux nodes the dma-requests property specifies the number of
peripheral request inputs(not nr. of request trigger inputs).
This commit fixes this for g4 series.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Change use of dedicated memory pool for linked list nodes for
node_rx_iq_report to common mem_link_rx. Former solution had
a drawback. Released link nodes may be enqueued to wrong memory
pool. E.g. link related with nopde_rx_iq_report went to common
link memory pool, whereas link nodes from common pool were enqueued
to dedicated list.
The solution was working because links have the same memory layout,
just different memory pools they originated from.
The problem may occur if one of those link memory pools is reset.
Then the same link may be used by node_rx and node_rx_iq_report
at the same time, causing controller failure.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add an application that uses Direction Finding API for reception
and sampling of CTE in connectionless mode (periodic adverising PDUs).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction finding is implemented only for Nordic link layer.
Build was failing due to missing header files for Openisa (RiskV).
Added dummy lll_df_types.h header file to OpenISA lower link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new callback to periodic advertising sync callback.
The callback may be used to receive notification about CTE
reports in connectionless mode (periodic advetising sync).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The function get_per_adv_sync is used by HCI events to get
reference to periodic advertising sync object related with
handle available in handled events. Due to implementation
of Direction Finding event handlers in separate source file,
direction.c instead of putting in hci_core.c the function
get_per_adv_sync has to be globally accessible.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add functions that give possibility to enable or disable
CTE receive and sample in connectionless mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Kconfig option that will enable supprot for connectionless
CTE reception. Thanks to that it will be possible to conditionally
enable or disable support of the feature and decrease code size
if the feature is not required.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Set BT_CTLR_DF_ANT_SWITCH_RX enabled by default.
There is already added implementation that supports
this feature in controller, so it may be enabled by
default.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add connectionless CTE RX feature to list of features supported
by controller. Add direction finding initialization in hci_core
if the feature is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Before thic commit the bluetooth/df unit tests subdirectory contained
connectionless CTE TX verification. Due to the implementation of
connectionless CTE RX new set of tests will be provided.
The new functionality requires different: configuration and common
setup code. Because of that, current test code was moved to
connectionless_cte_tx subdirectory.
Code shared by all DF tests is moved to common subdirectory.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Disable of CTE sampling for periodic advertising sync PDUs may be
interrupted by radio event. In such situation, TX thread will be
handled before RX thread delivers IQ samples report to host. In
this case RX thread would deliver IQ samples report after CTE
sampling was disabled.
To avoid such situation RX thread has to check if:
- CTE sampling is not disabled,
- CTE sampling was not requested to be disabled after start of radio
event.
CTE sampling configuration is double buffered. Updated configuration is
swapped at the beginning of radio event.
If CTE sampling is diabled or requested to disable (next radio event
didn't start), the IQ samples report should be dropped by RX thread
and should not be delivered to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add reporing of IQ samples collected for CTE attached to periodic
advertising PDUs with bad CRC.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Kconfig option that will enable possiblity to sample CTE attached to
PDUs that have bard CRC. Sampling is based on CTEInfo field available
in received PDU. If radio is able to parse the field correclty then
it will start sampling even the CRC is wrong.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add function that enables or disables CTE sampling attached to received
periodic advertising PDUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
ULL may request LLL to start receiving and sampling CTE attached to
end of periodic advertising PDUs. When the CTE is successfully sampled,
LLL should report collected samples to ULL.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Nordic Radio perihperal provides possiblity to get value of CTEInfo
field parsed from received PDU. It is faster to get the information
from Radio register than parse a PDU content.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add function to enable CTE receive and sampling. The function
is aimed to be used by code in lll_sync.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable or disable CTE sampling during periodic advertising sync evnet
it is requireq to change the event duration. To make it possible new
function was added that handles the operation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
lll_sync object is used to store information for LLL to enable
or disable CTE sampling. The commit adds initialization of
lll_df_sync member of lll_sync.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable or disable CTE sampling in periodic advertising scanner LLL
implementation lll_sync is extended by lll_df_sync member.
The lll_df_sync is a double buffer for lll_df_sync_cfg.
It will be used by LL thread to enable or disable CTE sampling and
provide configuration for sampling CTE in AoA mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add handling of Direction Finding node_rx_iq_report type in ULL.
This is required to correctly deliver IQ samples collected by
LLL during receive of PDU including CTE.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CTE sampling enable or disable requests should be provided to LLL.
Double buffer of lll_df_sync_cfg is added to lll_sync for that purpose
Thanks to that:
- there is no need to synchronize LLL with LL thread
- LLL has always access to valid configuration (new or former)
The configuration is stored in double buffer as instances
of lll_df_sync_cfg, not as pointers. This is the only
difference between double buffer pattern used to store adverising PDU.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new structure lll_df_sync_cfg to store DF configuration
for periodic advertising synchronization.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add functions that will allow to mangage IQ reports memory pool
e.g. allocate or relase new IQ report nodes.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new kind of node_rx type that will store IQ samples report.
The structure includes node_rx_hdr and may be used by the same
queues that are used to forward regular node_rx_pdu objects
between LLL and ULL.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add HCI_LE_Connectionless_IQ_Report event that will allow controller
to report received CTE and provide collected IQ samples to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new command HCI_LE_Set_Connectionless_IQ_Sampling_Enable that
will allow host to enable CTE sampling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
All commands are put in the file according to OpCode Command Field
increasing order. bt_hci_cp_le_set_cl_cte_tx_enable was written in
wrong position. This commit moves it to correct one.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction Finding support requires possibility to receive and sample CTE
attached to periodic advertising PDUs. New option will be used to enable
or disable the functionality. New option is introduced to avoid using
double statements checking if BT_CTLR_DF_CTE_RX and BT_CTLR_SYNC_-
-PERIODIC are enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To avid enabling HCI drived debugging, like in other controller source
files, Direction Finding has its own option BT_CTLR_DF_DEBUG_ENABLE.
This gives fine grained control deubgging output.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Set to disabled not yet implemented Direction Finding features.
The features will be enabled by default when they are implemented.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
IQ samples report requires information about antenna switch pattern
that was used to measure RSSI. RSSI is measured during PDU receive.
For Nordic Radio peripheral the PDU antenna is selected by first antenna
switch pattern set in SWITCHPATTERN register. That pattern is providded
by device tree. This information is already available in radio_df.c.
The information is required by LLL, that has access to functions
provided in radio_df.c. New function was provided to return PDU antenna
switch pattern.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This commit updates the revision of hal_nordic component
and introduces necessary changes to the IEEE 802.15.4 driver
to match latest nRF IEEE 802.15.4 radio driver API.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Added SAMPLE_MODULE_LOG_LEVEL_DBG as an exception. Define is used
in the log_api test suite.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add panic_mode flag reset to log_core_init(). It allows full logging
reinitialization which is useful for testing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, when no overwrite mode was used and there was no space
no packet was dropped. However, it should be allowed to drop skip
packet that may be added as padding at the end of the buffer.
Extended dropping scheme to drop skip packets in no overwrite mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added early return from mpsc_pbuf_alloc when requested size
exceed the buffer capacity. Previously, in that case buffer
was falling into endless loop.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Check whether the preempt event matches with the head of the
pipeline before aborting the currently active event.
This is required to avoid preemption of events that became
active due to done event and there has been a race in
stopping the preempt ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check whether the preempt event matches with the head of the
pipeline before aborting the currently active event.
This is required to avoid preemption of events that became
active due to done event and there has been a race in
stopping the preempt ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Sync up with missing LLL changes done related to moving the
handling of pipeline handling into LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added arduino gpios, and the typically used aliases for
arduino_spi, arduino serial and arduino_i2c
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Update the tester application to correctly reserve the number of bytes
needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the L2CAP channel send command to correctly reserve the number
of bytes needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the L2CAP OTS implementation to use the correct reserve
defitition. By not using the correct definition the stack always
allocates a new segment for the packet, which puts more stress on the
stack buffers.
Update TX data size to be more intuitive by adding the overhead, instead
of subtracting it. This increases the default MTU of the implementation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add argument to the L2CAP channel send command so that the user can
determine the length of the packet to send, this is useful for testing
various segmentation scenarios.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the documentation for L2CAp Connection oriented channel send
function to include better description of the L2CAP PDUs (Basic frames)
and L2CAP SDUs (Credit-based frames) so that the application can better
understand how to size the buffer pools and setting the RX mtu.
Document stack behavior on RX path and how the application has to
set up the channel in order to receive segmented packets.
Document stack behavior on TX path for reserving either mandatory or
optional header bytes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the L2CAP TX MTU default to fit the public key packet in a single
L2CAP fragment. This matches the configuration for RX buffer lengths
being set with this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove discardable buffer dependency on the specific implementations
except for HCI raw.
All of the in-tree Host-side HCI drivers have implemented discardable
buffer behavior.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add macros for calculating buffer sizes, accounting for the various
L2CAP and HCI headers needed as well as the reserved bytes needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit implements the missing OpenThread APIs related to CSL
receiver configuration.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
esp_reset() is called from net_if init function, which holds net_if lock
after commit 24b49f4399 ("net: if: Add locking"). At the end of
esp_reset() there is a blocking wait on `sem_if_up` semaphore. This
semaphore can be release only by esp_init_work(). esp_init_work()
however blocks on net_if operations, because net_if init function (which
invokes esp_reset() underneath) is still holding net_if lock. As a
result there is a deadlock, because esp_reset() and esp_init_work() are
both waiting on each other.
Remove waiting for `sem_if_up`, so that net_if init can exit and release
net_if lock.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This patch fixes a bug of SPI driver for SiFive FE310.
Current implementation sends/receives only first buffer even if
an user passed two or more struct spi_buf to driver.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This commit fixes the flash latency calulation in clock_control_init
for stm32wb and stm32wl series:
For these series new_hclk_freq can't be used to set the flash latency,
because the flash clk uses a different prescaler.
Without this fix, the flash latency could be set to an inadequat value
in cases wehere the new AHB3/AHB4 prescaler is different from the
new cpu1 prescler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds missing initialization of rcc prescalers for
stm32wb and stm32wl series when hse or hsi are selected as
system clock.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
stm32wb only has a single msi clock range, in contrast to wl, l4, l5
which have a second range that is active after exit from standby mode.
This difference must be taken account of in the driver.
This commit abstracts __LL_RCC_CALC_MSI_FREQ macro such that all series
can be supported, additionally the switch to the msirange
(LL_RCC_MSI_EnableRangeSelection) is now only executed on series
that support it.
As a result stm32wb socs can use msi as sysclock.
The same should be done for stm32l0, but this commit series limits
the scope of socs to avoid getting too bloated.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commmit restructures the clock_controller code such that the cpu2
prescler assignment later can be excluded for single core socs.
The stm32wl mcu line has variants with a single cortex-m4 core
(stm32wle5), therefore the prescaler for the second clock should
only be set for dual core socs.
This commit still checks for the complete series
(CONFIG_SOC_SERIES_STM32WLX) as the single core variants are not
yet introduced, later the condition should check for a flag like
CONFIG_SOC_STM32WL5X instead.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit fixes several occurences where a struct members is wrongly
dereferenced, which causes a compile error in case the msi clock is used
as system clock.
Only affects stm32wb and stm32wl with MSI selected as sysclock.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The changes to re-organize the power mgmt header files exposed a
build failure on thingy53_nrf5340_cpunet since CONFIG_PM can't be
set on that platform. We already exclude nrf5340dk_nrf5340_cpunet
so just add thingy53_nrf5340_cpunet to the platform_exclude list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit continues simplifying the generation of
isActiveFlag/clearFlag funtion pointer array for the request generators
and does the same for the table_ll_channel.
Additionally move struct dmamux_stm32_channel to c file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit uses dt property dma-channels instead of ll defines to
make sure every soc has correct number of function pointers defined.
While commit 5f6218a tried to fix this for g0 series, this caused
regression for other series(e.g. stm32g431). Using UTIL_LISTIFY and
dt properties this should finally be fixed and reduce boilerplate code.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
doxyrunner plugin replaces a series of CMake+Python hacks. These include
input changes tracking and incremental build output simulation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
zephyr.doxyrunner Sphinx extension is meant to replace multiple Python
and CMake scripts into a single Sphinx extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace the restore modification times with a new script that is more
specific to the Doxygen+Sphinx needs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added radio interface to save and restore radio ready
timestamp. This will be saved between ISO Subevents and
used in done event for anchor point synchronization and
drift compensation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Put the testcase test_catch_assert_in_isr() to execute last, to prevent
it affects other test cases. Because when we caught an assert failure
in the ISR handler, it cannot be guaranteed that all the current
program status would be recovered.
Fixes#34844.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
NRFX UARTE would write to user supplied buffer on IRQ without checking
whether or not the supplied buffer had available space left to write
one char
Signed-off-by: Arne Edholm <arne.edholm@assaabloy.com>
A badly written sector close ate that has correct crc8 could allow
jumps outside the assigned flash area. This behavior is fixed.
A possibility existed that a badly erased sector or a incomplete write
of a large item created a empty closed sector. This has been fixed by:
a. Erase verification.
b. Clearing such a sector at startup.
Fixes#34382
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Co-Authered-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This PR add 2 module test cases:
- test_smp_release_global_lock() and test_smp_release_global_lock_irq()
verify z_smp_release_global_lock() works.
And 1 integration test cases:
- test_inc_concurrency() to verify parallelly increase operations will
fail if not applying synchronization on SMP.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Running xtensa-esp32-elf-objdump -d -S zephyr.elf leads to lag on
macOS. Hence this property is removed from binutils.
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
west build generates binary file of around 13MB. Use esptool to
generate proper binary file
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Update shell L2CAP to use the new delayable work API for the delayed
received confirmation response.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update GATT to use the new delayable work API for the delayed
calculation of the database hash and the service changed indication.
When the database hash characteristic is read the hash work needs to be
canceled if in progress and if currently executing wait for it to
complete so that the threads don't both write to the stored value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the connections to use the new delayable work API for the
deferred work host timer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update AVDTP to use the new delayable work API for the send host timer.
The AVDTP protocol is incomplete, there is no cancelation of the timer
but it is also never started, as there is no users of the internal
functions, and no public functions exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the implementation of controller based privacy to use the new
delayable work API for the RPA timer. Always use schedule for the
timer since RPAs should not be used more than the configured RPA
timeout.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update RFCOMM to use the new delayable work API for the RTX host timer
used for disconnecting and idling.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the periodic sync sample to use the new delayable work API
for blinking the LED.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the SMP channel context to in order to simplify the memset of
the struct in smp_init. This makes the code easier to read, and easier
to add more structs that should not be reset by memset.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the RPA timer to the new delayable work API.
Checking for submitted RPA timer no longer needed with the schedule
function, which does not change the deadline.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since CONFIG_KERNEL_VM_OFFSET no longer needs to be the same as
CONFIG_SRAM_OFFSET, set it to zero to reclaim the hole in
virtual address space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There was a restriction that KERNEL_VM_OFFSET must equal to
SRAM_OFFSET so that page directory pointer (PDP) or page
directory (PD) can be reused. This is not very practical in
real world due to various hardware designs, especially those
where SRAM is not aligned to PDP or PD. So rework those bits.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update docker image to v0.17.1 to get SDK 0.13.0-alpha-1 to
allow testing of ARC64 as well as the SDK update to gcc-10.3 and
qemu 6.0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Move PM related APIs to `include/pm` so that it follows API `pm_`
prefix namespace. In order to make transition easier
`include/power/power.h` is kept pointing to `include/pm/pm.h`.
- Move most of device PM related content from `include/device.h` to
`include/pm/device.h` and `include/pm/runtime.h`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Commit 09ba258b05 changed the maxdepth
of the entire samples toctree to 4 from 2 while making a fix to the
tensorflow docs.
Unfortunately that makes the docs index page for the samples too long,
as there are a lot of samples. It's better to just link each one by
one and let the user click to the one they want to find out
information on building and running the sample. Since the individual
README for each sample is usually quite short; it's not a lot of
scrolling, and the per-sample toctree is already available in the
sidebar anyway.
Fix this issue with the index page by restoring the original maxdepth.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Looks like I forgot to finish a sentence. There's nothing really
special besides the top level requirement for an enabled node which is
mentioned at the top of the page. Add a reference to the bindings
index while we're here to make it clearer what such nodes contain.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This board clock configuration was relying on default Kconfig
value for APB2 value, and hence apb2 has not been converted
to device tree.
Explicit apb2 value in dts.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix definition condition for APB1 and APB2.
These were not visible until now as defaulted
in Kconfig.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
These were missing but not visible since value was defaulted
in Kconfig.
With Kconfig deprecation this breaks compilation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In prts of the code, we use rcc node "clocks" property to testify the
use of device tree for clocks configuration.
This doesn't work in case of stm32h7 m4 targets as for those,
"upstream rcc" clock configuration, such as sysclk source selection,
is done on m7 core and hence rcc node doesn't have a "clocks"
property.
To work around this, use alternate "d1cpre" property in case of
stm32h7 targets.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cortex-M4 stm32mp1 zephyr relies on chip Cortex-A for clock
configuration.
No change is then required for conversion to dts based clocks
configuration, but we do need to exclude use of newly deprecated
Kconfig symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add new symbol CLOCK_CONTROL_STM32_HAS_DTS to exclude definition
of other CLOCK_CONTROL_STM32_* symbols when dts based configuration
is in use.
CLOCK_CONTROL_STM32_HAS_DTS is defined based on availability of
"clocks" property in rcc node.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Symbol CLOCK_STM32_HSE_CLOCK will remain in use in context of stm32
clock_control configuration using device tree, cf commit
a7989f64a3.
In preparation for next change, separate it from the others symbols
definition. Also make it non dependent from other Kconfig symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following introduction of dts based driver configuration (cf #34120,
#32609 and #34701), deprecate Kconfig symbols by generating a warning
when one of these symbols is used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add extra check for the LwM2M client state, to allow triggering of the
Registration Update message only when registered.
This fixes an issue, when the `trigger_update` flag could be set during
the bootstrap procedure (when the value of the Lifetime resource was
set), which resulted in an uneccessary Registration Update message just
after the successful registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit implements the OpenThread APIs to configure a radio
reception slot at a specific time. This is needed for the correct
functioning of a CSL receiver.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Get the correct flash device from the storage partition node.
The current code is relying on the invalid assumption that the
chosen zephyr,flash-controller node is the device which contains
the storage partition.
Reported-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a real README, convert the device getter to DEVICE_DT_GET_ANY,
and enable assertions to make debugging easier on new users.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use a gpio_dt_spec, dropping device_get_binding. This in turn lets us
write everything in a single main() without sacrificing readability
since the LED is optional.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL with DEVICE_DT_GET on the
chosen node itself.
This is causing a build error in CI for the waveshare_open103z board
because it disables CAN by default in favor of USB. Throw in an
overlay reversing that decision for the sake of this sample to keep
things building. (Though the build previously succeeded, the
device_get_binding() call would simply have failed.)
Replace the LED access with GPIO_DT_SPEC_GET_OR. This changes the
semantics slightly so that the simulated LED implemented via printk()
is run if either the node is missing or the pin cannot be configured,
instead of just running when the node is missing. An unready LED port
when the node is defined still returns early from main.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace device_get_binding with DEVICE_DT_GET(). Fix and clean up
error handling and debug printing during initialization.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Require board overlays to configure the sample in the /zephyr,user
node, and access the device with DEVICE_DT_GET instead of
device_get_binding(). Update the documentation and move existing board
configuration to overlays.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the new GPIO_DT_SPEC_GET_OR() macro to clean up the node detection
code by eliminating conditional compilation. This increases code
coverage on platforms where not all the devicetree nodes are
available.
Clean up some whitespace while we're at it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Just a bit of future-proofing so we can continue to link to the right
place in case we ever want to move the /zephyr,user docs out of the
'inferred bindings' section in the DT guide.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These helper macros avoid boilerplate when constructing a gpio_dt_spec
structure from optional devicetree properties.
Update the release notes while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If modem receives an IPv6 address, buffer overrun
would occur. Fix this by checking string length to
ensure what type of IP address needs to be parsed.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
device_pm_control_nop has been marked deprecated so we get a CI
build error due to its use. Replace with NULL to fix the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Extend the steps taken in tox.ini by type checking the 'devicetree'
package. This will make it easier for callers to type-check code that
uses the low level DT module's public APIs, since they can rely on
the type checker a bit more.
It will also help avoid bugs by adding some type checking for future
changes to this module.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Mypy is complaining about this line for some reason I didn't have time
to figure out. Just shut it up for now; I'll look into this when I get
around to type annotating edtlib.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that all the other code it depends on is annotated, we can finish
up the type annotation of this module in the main DT class.
It's not worth it to try to annotate the private methods (the ones
that begin with '_'). Most of these are low level lexing helpers that
aren't particularly amenable to static type checking, because the type
of a token's value is often dependent on the token ID in ways that
static type annotations are not well equipped to capture.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We'd like users of this API to know that DT.root is always a Node,
and not an Optional[Node].
However, although DT.__init__ throws an exception if the resulting DT
object would have no root node, static analysis can't tell that since
the root instance attribute starts out as None during initialization,
so checkers like mypy are convinced it's Optional[Node].
Since this is really OK, we'll quiet the type checker down by stashing
the instance attribute in self._root instead, and providing a root
property accessor that is annotated to return Node instead of
Optional[Node]. We can tell mypy to ignore what looks like a potential
None here to allow callers to treat the result as a Node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The documentation says DT.__init__ takes any iterable for the
include_path, but this leads to bad results when you pass it something
other than a 'real' sequence (list/tuple/etc), like a generator:
>>> dt = DT('/tmp/foo.dts', (x for x in ['a', 'b', 'c']))
>>> repr(dt)
"DT(filename='/tmp/foo.dts', include_path=<generator object ...>)"
Make a copy in list form just to avoid things like this.
Add a test for this and relax the regular expression in the existing
test case related to this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some of these are also tripping up a python 2 / python 3 warning
in mypy in the way that '{}'.format(b'foo') works, which we silence by
explicitly requesting the python 3 behavior.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The way that _init_tokens() is manipulating globals() defeats static
analyses of the file that are trying to infer a type for the 'tok_id'
variable in assignment expressions like 'tok_id = _T_INCLUDE'.
To make it easier on the analyser, define the token types as an
enum.IntEnum named _T. This means we can write e.g. '_T.INCLUDE'
instead of '_T_INCLUDE', avoiding line length increases in the lexing
code.
While we're here, use '==' and '!=' instead of 'is' and 'is not'
when comparing a tok_id that is obtained from an re.Match.lastindex
with a _T.FOO value.
This is now necessary since an int object and a _T object definitely
don't point to the same memory. It worked previously because CPython
interns all integer instances from -5 to 256, but that's an
implementation detail and not a language feature. Since we're getting
the ints from an re.Match.lastindex instead of putting the exact
_T_FOO values into some list, this code probably should not strictly
speaking have been using 'is'.
Explicitly initialize the global _token_re also, to make it more
visible for static analysis.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Continue annotating the module. In some cases mypy will miss that
_err() calls means the function will not return, so we return an
unnecessary local variable to appease it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a _MarkerType enum. A subsequent commit will use it for type
annotations in the Property class.
Fix an incorrect type in a comment while we're here.
We continue to use 'marker_type is _MarkerType.FOO' instead of
'marker_type == _MarkerType.FOO' because we are adding those actual
_MarkerType.FOO objects to each property, so 'is' comparison
is legitimate.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
A step along the way towards typing the whole module.
Fix an incorrect (or at best misleading) comment while we're here,
which was noticed by the type checker when I originally annotated
'props' as a Dict[str, bytes].
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Marking this NoReturn helps the type checker figure out that functions
which call it are only returning valid values or failing to
return. (It unfortunately doesn't always work as mypy's control flow
analysis seems to treat a direct 'raise DTError(...)' differently than
calling _err() in some situations, but it helps.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the DTError, Node, Type, and Property definitions to the top.
This way, class definitions occur before methods which use those
classes. This will be useful to avoid string literals in type
annotations that will be added later. Some can't be avoided due to
circular dependencies, but this will help.
Adjust whitespace.
No functional changes expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Change to make i2s_config const missed a case in the SAM driver.
Without this we get build errors when building in CI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't currently configure any SPI interface on the hexiwear_k64 so
remove 'spi' as a listed supported feature in the board YAML.
This can be added back if SPI support is added for the board in the
future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update to new docker image with various updates including renode, llvm
and the base distro (moving from ubuntu 18.04 to 20.04).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support to generate SPDX 2.2 tag-value documents via the
new west spdx command. The CMake file-based APIs are leveraged to
create relationships from source files to the corresponding
generated build files. SPDX-License-Identifier comments in source
files are scanned and filled into the SPDX documents.
Before `west build` is run, a specific file must be created in the
build directory so that the CMake API reply will run. This can be
done by running:
west spdx --init -d BUILD_DIR
After `west build` is run, SPDX generation is then activated by
calling `west spdx`; currently this requires passing the build
directory as a parameter again:
west spdx -d BUILD_DIR
This will generate three SPDX documents in `BUILD_DIR/spdx/`:
1) `app.spdx`: This contains the bill-of-materials for the
application source files used for the build.
2) `zephyr.spdx`: This contains the bill-of-materials for the
specific Zephyr source code files that are used for the build.
3) `build.spdx`: This contains the bill-of-materials for the built
output files.
Each file in the bill-of-materials is scanned, so that its hashes
(SHA256 and SHA1) can be recorded, along with any detected licenses
if an `SPDX-License-Identifier` appears in the file.
SPDX Relationships are created to indicate dependencies between
CMake build targets; build targets that are linked together; and
source files that are compiled to generate the built library files.
`west spdx` can be called with optional parameters for further
configuration:
* `-n PREFIX`: specifies a prefix for the Document Namespaces that
will be included in the generated SPDX documents. See SPDX spec 2.2
section 2.5 at
https://spdx.github.io/spdx-spec/2-document-creation-information/.
If -n is omitted, a default namespace will be generated according
to the default format described in section 2.5 using a random UUID.
* `-s SPDX_DIR`: specifies an alternate directory where the SPDX
documents should be written. If not specified, they will be saved
in `BUILD_DIR/spdx/`.
* `--analyze-includes`: in addition to recording the compiled
source code files (e.g. `.c`, `.S`) in the bills-of-materials, if
this flag is specified, `west spdx` will attempt to determine the
specific header files that are included for each `.c` file. This
will take longer, as it performs a dry run using the C compiler
for each `.c` file (using the same arguments that were passed to it
for the actual build).
* `--include-sdk`: if `--analyze-includes` is used, then adding
`--include-sdk` will create a fourth SPDX document, `sdk.spdx`,
which will list any header files included from the SDK.
Signed-off-by: Steve Winslow <steve@swinslow.net>
Remove the config BOOT_TIME_MEASUREMENT and corresponding #ifdef'd code
throughout (kernel/init.c, idle.c, core/common.S , reset.S, ... ) which
hold the extern hooks for z_timestamp_main and z_timestamp_idle in the
removed boot_time test suite.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
This test for boot time was sufficient when it was originally
introduced, but is no longer appropriate as the code and
ecosystem grew.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
`write_stats` functionality implementation is guarded by
`BT_GATT_CLIENT`, but is also called from commands defined when
`BT_GATT_DYNAMIC_DB` is set. This means that now application will not
build with `BT_SHELL` used, when we set `BT_GATT_DYNAMIC_CB` solely.
Move this functionality to top of the file without guarding
ifdefs, so it can be used in all gatt shell commands.
Signed-off-by: Marek Metelski <marek.metelski01@gmail.com>
There is a choice to log btmon logs over UART or RTT.
You can choose number of RTT buffer, set its name and size.
Replaced CONFIG_BT_DEBUG_MONITOR with CONFIG_BT_DEBUG_MONITOR_UART
for UART usage and CONFIG_BT_DEBUG_MONITOR_RTT for RTT.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
i is of uint type, so it'll never be negative. Thus, while loop
condition i >= 0 will always be true.
This patch also fixes issue with marking unused l2cap channels
as free by freeing only these that were marked as in_use by
get_free_channel(), and not all of them.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Create a common dtsi file to share peripherals between both CPU cores.
The spi is the initial shared peripheral.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
The current rf2xx driver not implement any configuration. Add
the minimal structre to implement rf2xx driver configuration and
implement IEEE802154_CONFIG_PROMISCUOUS mode.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Configure transceiver to create a 0 period backoff and perform only one
time the CCA without transmission retires for failures.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current RF2XX driver only support IEEE802154_TX_MODE_CSMA_CA. Add
IEEE802154_TX_MODE_DIRECT to allow transmit packets immediately without
performing random backoff, CCA and retransmission process.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Use device_usable_check instead of device_is_ready so we can propagate
back whatever error that device_usable_check() determined to the caller
of the clock API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The MAX17262 is an ultra-low power fuel-gauge IC which implements the
Maxim ModelGauge m5 algorithm. The IC monitors a single-cell battery
pack and supports internal current sensing for up to 3.1A pulse
current. The IC provides best performance for batteries with 100mAhr
to 6Ahr capacity.
Signed-off-by: Matija Tudan <mtudan@mobilisis.hr>
Adds mimxrt1060_evk and mimxrt1064_evk boards to the platform_allow list
for the smp_svr sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1060_evk device tree
to support mcuboot and storage on the external QSPI flash. This flash is
rated for 100K minimum program-erase cycles per sector, therefore this
partition configuration supports approximately 100K / (3072/128) = 4167
upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1064_evk device tree
to support mcuboot on the internal QSPI flash. This flash is rated for
100K minimum program-erase cycles per sector, therefore this partition
configuration supports approximately 100K / (1984/64) = 3225 upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is always defined since:
755d09e149 include/drivers/clock_control: stm32: Update for STM32F1
support
So the condition has currently no effect and causes the prescaler to
always be set to /2.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Renamed offset and offset_units to offs and offs_unit to be
consistent with rest of the other structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ULL reference count decrement to be performed before the
done events are handled, so that correct reference count is
used to determine if events are pending in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update HCI driver implementation in the controller to
process a list of controller events by traversing net buf
frags.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reorder Channel Selection Algorithm #2 and Minimum Number of
Used Channels Procedure bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix regression in central initiated terminate introduced in
commit 3a80785947 ("Bluetooth: controller: Fix connection
terminate to happen on event done").
The regression caused an additional central connection event
transmitting PDU after the previous connection event had
received acknowledgment for the terminate_ind PDU from the
peripheral.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we want to test conn on legacy and ext adv, we need scanx to
handle connection more than once. Change local flag to global and
let it indicate whether we want scanx to initaite connection when
device is scanned.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
'disconnected' callback always unrefs conn object, but this is only
valid if connection was created in scanx since app owns reference to
that conn object. In case of advx, app does not own any reference so
should not unref.
Basically we do not really need to hold any reference to conn object
in either scanx or advx so just drop reference immediately after conn
is created in scanx, no need to worry about it later.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Do not report auxiliary PDUs as advertising reports when in
initiator state on auxiliary channels.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ensure that the advertiser address type and address is setup
in both 1M and Coded PHY scanning instance when extended
create connection is enabled on both the PHYs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When connection is initiated in one of either 1M or Coded
PHY initiating scan instance then the other scanning
instance's scheduling and memory allocation needs to be
cleaned up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reserve an additional node rx buffer when Extended Initiator
is supported as the received ADV_EXT_IND PDU is being
buffered in the auxiliary channel scanning instance and is
only released/flushed in the done event of the initiating
auxiliary channel radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed incorrect LLL context used to generate done event for
auxiliary channel scanning. Other minor comments and fixes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reset the scanning context for the PHY not selected in the
Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This allows to initiate a connection on secondary advertising channels,
i.e. when advertises uses advertising extensions.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When in initiating state we need to handle ADV_EXT_IND as in regular
scan sice we always want to scan AUX_ADV_IND in order to be able to
connect.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to take RX chain delay and PHY used to send CONNECT_IND into
account when calculating 1st connection event offset.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
On secondary advertising channel transmitWindowDelay depends on PHY
used to create connection so we need to adjust it.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We will need the same checks for AdvA and TargetA/InitA in lll_scan_aux
so let's make them public and use address explicitly instead of passed
via pdu.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We can use the same code to create both CONNECT_IND and AUX_CONNECT_REQ
since they are basically that same PDUs.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Correct thee dt overlays for the STM32 boards, so the Zephyr
image starting address is in accordance with what TF-m expects
it to be.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Decrease the submitted work delay, to ensure that the PSA
crypto operation will be preempted when the work fires. The
modification is required for devices with fast crypto
operations. Also minor corrections to the test ase name,
so it is not the same with the other arm_thread_swap test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an entry in the release notes regarding the
support for non-blocking secure calls in Zephyr.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For testing secure->non-secure thread swapping.
This also tests that the FP context is correctly preserved
when calling a secure function.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
When ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS is enabled, if FPU is
being used (CONTROL.FPCA == 1), store all FP registers before
entering the secure function, and restore them afterwards.
This is needed if any NS thread or ISR that interrupts the secure
function uses FP registers. If they do, a secure UsageFault occurs
unless this change is applied.
This allows k_sched_lock() and k_sched_unlock() to be dropped when
ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS is enabled.
Enable ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS by default when
building TF-M.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This adds code to swap_helper.S which does special handling of LR when
the interrupt came from secure. The LR value is stored to memory, and
put back into LR when swapping back to the relevant thread.
Also, add special handling of FP state when switching from secure to
non-secure, since we don't know whether the original non-secure thread
(which called a secure service) was using FP registers, so we always
store them, just in case.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Use size_t type where it makes sense and
check if the buffer is large enough before it is used.
Fixes: #33786Fixes: #33795
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since Pygments 2.7.0 devicetree syntax is supported, so there is no need
to use a custom lexer. Version 2.9.0 introduces a fix that is required
for some devicetree snippets.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit aligns iis2dlpc sensor driver to latest multi
instance sensor driver model.
In particular:
1. make use of some few DT helpers:
- get bus devices with DEVICE_DT_GET
- get SPI information with SPI_CONFIG_DT_INST
- get drdy gpios with GPIO_DT_SPEC_GET
2. make use of the stmemsc common routines and move ctx
handler inside struct config, so that the bus_init
routines can be totally avoided.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We can use build-time offsets from a struct k_thread pointer directly
to struct _callee_saved members. No need to compute that at run time.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
SMP support on cAVS is implemented by using uncached addresses
for all writable data sections except for stack, i.e. for .data,
.bss and some other specialised ones. So far that has been
implemented for cAVS 1.5. This patch does the same for cAVS 1.8.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Make the divide instruction not being optimized of the ztest example
test case. Do this because it will be replaced by invalid opcode
exception instruction generated by GCC.
Fixes#33403.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
In this example, python test case get the running directory by handling
the "--cmdopt" option passed by pytest.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
1. Add a class of Pytest(Harness) which can handle pytest script
in harness.py
2. Use running_dir to store current test directory which be
used in pytest scrpt.
3. Add usage of this feature into zephyr doc.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
This is mainly a feature release which includes a few ways to speed up
'west update', along with a couple of fixes and other changes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When multithreading is off, kernel source files like sem.c (samphore
implementation) are not present in the build. Some platforms by default
fetch modules or drivers that are using multithreading primitives and
because of that fails to compile when multithreading is off.
Limit the test to only qemu platforms since test is arch specific.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
reg value should match value provided within node name (as in pll@2).
Fix this to avoid warning.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The STM32H7x flash has an integrated ECC that can correct single
errors and detect double errors. When a double ECC error is detected,
the DBECCERR1/2 flag is raised and there is a bus fault.
We now mask this bus fault and check the error flags. ECC errors are
logged with the offset of the data. Single ECC errors cause a warning
to be logged and double ECC errors return -EIO.
Fixes#33140.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Switch to using I2C0 as this I2C controller on the FRDM-K64F is actually
configured (pinmux) for use and is available on an arduino header if
someone would wire up an adxl372 to it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 as being required on NXP Kinetis DTS bindings for I2C,
FTM, UART, and DSPI related devices.
Other devices like ethernet and CAN are utilized outside of just the
Kinetis family and thus we can not require pinctrl-0 property for them
at this time.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As the KW2XD is a SiP (System-in-package) the SPI1 controller on the MCU
is connected to the modem. As the pinctrl details for this in the
SoC dtsi file as these pins are not exposed in the pindata XMLs from
NXP.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set SPI0 controller to default to being disabled in SoC dtsi files and
having the board dtsi files enable it. The only board that wasn't doing
this already was the frdm_kw41z.dts.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The devicetree enables i2c0 and ftm1 but these devices are connected to
anything on the board so they shouldn't be enabled. Remove them from
being enabled by the board devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have specific bindings for STM32F100 devices,
we need dedicated treatment for PLL source HSI case.
Otherwise, we end up using undefined symbol STM32_PLL_PREDIV1.
Please note that previous code compiled, it was assigning
a wrong value to prediv. This had no consequence because
prediv value is forced in Cube LL functions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert board to use of device tree for clocks configuration.
Note: Fixed sys clock frequency that was not taking into account
systematic /2 divisor when HSI is selected as pll source.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add specific binding for stm32f100 pll which differs from existing
stm32f1 and stm32f105 specific pll binding.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
According to RM0041.pdf clock tree for stm32f100xx devices is
different from both STM32F10X density and connectivity lines devices,
but is a combination of both.
Rework symbols definitions so that STM32F100xx is neither of those
and uses:
- CLOCK_STM32_PLL_MULTIPLIER as on SOC_STM32F10X_DENSITY_DEVICE
- CLOCK_STM32_PLL_PREDIV1 as on SOC_STM32F10X_CONNECTIVITY_LINE_...
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When broadcasting with ISO it would wrongly use the tx_pool
defined for CIS, instead of the broadcast TX pool.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is a smaller firmware loader with fewer dependencies and much
faster operation:
+ No need for an externally built SOF diag_driver, it gets its DMA
memory in userspace and works with any unmodified kernel (that has
hugetlbfs anyway)
+ Does not leak kernel memory on failure (diag_driver was basically a
front end for kmalloc(), and if the script exited early...)
+ Much smaller: 230 lines of python in one file vs. 1600 in nine.
+ Much faster; no needless operations and sleeping steps. Completes
load and launches hello_world in 0.2s of real time.
+ Correctly resets the stream state and can actually recover form the
"wedged DSP" state that the previous loader would sometimes get
stuck in.
+ Clearer structure, easier to use as a testbed for driver-side
interaction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The sysview module does not set an interrupt number when recording ISRs
using SEGGER SystemView. Added ISR numbers for Cortex-M based chips.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
The acrn_ehl_crb used the APIC timer but did not configure the TSC
M and N parameters, which are advised where available. This adds
the values consistent with native (ehl_crb) definition.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The chan_id value returned by dma_request_channel
can be negative, changing the type of chan_id to int.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add an application that initializes Bluetooth Subsystem,
creates an Extended Advertising set, starts Periodic
Advertising and creates BIG to demonstrate ISO Broadcaster
functionality.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The mcumgr version has been updated to 0.2.0
Commits affecting Zephyr that are included with the new revision:
62009e0 img_mgmt_state_set_pending: corrected error handling
(bug fix)
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Extend the stress test of stacking error, to cover
the case of an active FP context.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This clarification makes Zephyr's LED brightness API match the
behavior that both the Android lights HAL and Linux's userspace LED
drivers expose.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Two minor tweaks and a semantics change:
- fix a whitespace nit
- use gpio_pin_configure_dt()
- turn the LED on in case the percentage is nonzero
The last change patterns this driver after behavior in the Android
lights HAL, which recommends analogous behavior when the user requests
a color change in a non-RGB LED:
Do your best here. [...] If you can only do on or off, 0 is off,
anything else is on.
https://source.android.com/reference/hal/structlight__state__t
I think this behavior makes more sense.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Setup the static MPU regions before PRE_KERNEL_1 and
PRE_KERNEL_2 functions are invoked. This will setup
the MPU for SRAM regions in case code relocated to SRAM
is invoked from any of these functions.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Code relocated using CONFIG_CODE_DATA_RELOCATION_SRAM should
be allowed to execute from SRAM
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Use the CODE_DATA_RELOCATION_SRAM config to indentify code relocated
to SRAM so we can setup the MPU for the SRAM region used for code
relocation.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. This will help us identify if the relocation is to
SRAM which is used when setting up the MPU entry
for the SRAM region where code is relocated
2. Move CODE_DATA_RELOCATION configs to ARM specific
folder
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The AUDIO_DMIC INIT_PRIORITY definition is set to 60 by default,
but this value is causing dmic drivers to be initialized prior to
i2s, to which they are dependent from.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fixes an issue with mcuboot where the SoC will freeze when the dpll is
disabled since `atmel_samd_init` was already run in the bootloader.
Signed-off-by: Abram Early <abram.early@gmail.com>
The cbprintf packaging needs CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE
to be enabled to work with long double. So #ifdef that inside
CONFIG_FPU.
Also add to the sample.yaml to enable testing with FPU and
long doubles.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The size of long double on x86-32 is 12 which is not
a power of 2, and this results in build error when it is
being used for alignment of buf32 in log_core.c.
So manually set it to 16.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We need to clear interrupt status, before we enable the interrupt.
So I let ite_intc_isr_clear() to be global function.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
The i2s_config structure passed to the i2s_configure() function is
not supposed to be modified by the driver. Similarly, the structure
returned by the i2s_config_get() function is not supposed to be
modified outside the driver.
Decorate the pointers to those structures with the const qualifier
and correct one driver that actually modified the structure passed
to i2s_configure().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Introduce a new enumeration value that allows setting configuration
and triggering commands for both I2S streams simultaneously.
Such possibility is especially important on hardware where the streams
can be only enabled/disabled (but not started/stopped) independently,
like it is in nRF SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Automatic collision detection for half-duplex mode can be enabled
by setting `collision-detection` proprety for uart hardware
in the dts file. If the transmitted bit does not match the received
bit an error is raised. This is useful in RS-485 half-duplex mode.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Certain uarts support collision detection. This is mainly used in
half-duplex scenarios, like RS-485 and raises an error when bits
output on the TX line do not match the bits received on the RX line.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Both z_arm64_exit_exc and z_arm64_exit_exc_fpu_done must be within
the same section as execution falls through here.
If z_arm64_exit_exc_fpu_done creates a section of its own then the
linker is free to disjoint the code and we absolutely don't want that.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds k_thread_join() to the thread being used in
test_sem_take_timeout_isr() to avoid a thread re-use error
in the test after this one.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The permission to use multiple_condvar is not granted to test
test_condvar_multiple_threads_wait_wake, which results in
bunch or permission error messages, and actually not testing
the conditional variables. This grants the permission to
the those conditional variables to the test threads. Also,
replace the k_yield() with k_msleep() to allow all created
threads time to run. A simply k_yield() might let a few to
run before the next batch of "waking" threads start to run,
resulting in some conditional variables not being initialized
but trying to wake.
Fixes#34777
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Allow SMP processing for SOF on ADSP. Note, that after this
SOF will build with SMP support enabled on all cAVS versions,
but secondary cores will remain disabled unless an SMP
topology is loaded by the host.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
With SOF secondary cores are booted later at run-time instead
of the traditional simultaneous booting of all the cores.
Adjust arch_start_cpu() to make that possible.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
smp.c only has to be built if CONFIG_SMP is enabled. Remove
preprocessor checks from the file itself and update cmake rules
instead.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
To disable the IDC interrupt on the interrupt controller a bit
must be set in the MSD register instead of clearing the bit in
the MCD register, which has no effect.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently cavs_idc_smp_init() is called from a system
initialisation sequence, which only runs on the main CPU.
However, it must also run on secondary CPUs if those are
powered on later instead of simultaneously with the main
CPU.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Currently P4WQ supports queues with sets of user-provided
worked threads of arbitrary numbers. These threads are started
immediately upon initialisation.
This patch adds support for 3 more thread implementation options:
1. queue per thread. It adds a K_P4WQ_ARRAY_DEFINE() macro which
initialises an array of queues and threads of the same number.
These threads are then uniquely assigned to respective queues.
2. delayed start. With this option threads aren't started
immediately upon queue initialisation. Instead a new function
k_p4wq_enable_static_thread() has to be called to enable those
threads individually.
3. queue per CPU. With this option the user can assign CPU masks
to threads when calling k_p4wq_enable_static_thread().
Otherwise the cpu_mask parameter to that function is ignored.
Currently enabling this option implies option 2 above. Also so
far to enable queues per CPU the user has to use
K_P4WQ_ARRAY_DEFINE(), which means this option also implies 1
above, but both these restrictions can be relaxed in the
future if required.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Work items in P4WQ currently belong to the user before submission
and after exit from the handler, therefore, unless the handler
re-submits the item, accessing it in p4wq_loop() in such cases
is racy. To fix this we re-define work item ownership. Now the
item belongs to the P4WQ core until the user calls
k_p4wq_wait(). If the work item has its .sync flag set, the
function will sleep until the handler completes processing the
work item or until the timeout expires. If .sync isn't set and
the handler hasn't processed the item yet, the function returns
-EBUSY.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When SMP is disabled, the SMP initialisation level is
undefined, therefore a different level must be used.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When secondary cores are booted, they use the dummy thread and
the IRQ stack until they switch over to a real thread. Therefore
dummy threads shouldn't be skipped when cohering outgoing thread
stack, only threads with zero stack size should be skipped.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Usually Zephyr boots all secondary CPUs as a part of system
boot. Some applications however need an ability to boot on
the main CPU only and enable secondary CPUs selectively at
run-time. Add a Kconfig option to support this behaviour.
When booting CPUs on demand applications also need helpers
to initialise a dummy thread and begin threaded execution
on those CPUs, add two such helpers.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
irq_enable() should be called with the composite IRQ code as its
argument, not just the Xtensa proper part of it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Support this when debugging also.
Tweak the style for brevity also while we're here by propertizing the
supports_nogui method, etc.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes it easier for runners to check if the binary has thread
info support turned on, allowing automatic configuration of the
underlying tool to support threads, if possible.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Set options that are definitely true or false to True or False in the
options dict. Add a 'getboolean' method that also allows a fallback to
False in case the option is not mentioned in .config due to unmet
dependencies. This allows calling code to just ask about the option
they are interested in, even if the .config file doesn't mention the
option at all.
Propagate this to users within the runners package and 'west sign',
taking advantage of the new build_conf property.
Rename the 'bcfg' internal variable in sign.py to 'build_conf' to
match other source files that use BuildConfiguration instances, to
make it easier to grep for users.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Instead of mocking out the BuildConfiguration class, just create its
input file and let the real class do the work.
This in turn exposes a bug in the way the board name is being pulled
out of the BuildConfiguration, which we fix to keep the tests passing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is really verbose, and I doubt anyone cares unless there is a
problem. Keep it around when run as 'west -v flash' to allow for
debugging, though.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Defer loading .config until we really need it, when we are flashing a
binary. Pre-emptively loading it is wasted effort if we're flashing a
.hex, which has been the default behavior when possible since
dcaabb860f ("west: runners: jlink: prefer .hex over .bin").
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Put it all in one log message rather than splitting it up.
This makes it look cleaner now that each log message is prefixed with
'runners.link:'.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
JLink versions like 'V7.0a' do not conform to PEP 440 version
conventions; the 'a' part is used by PEP 440 compliant versions for
alphas. It gets parsed to a legacy type by the packaging library,
which always is treated as a lower value when compared with a
conforming version string.
To fix, get the version from the shared library distributed with the
JLink tools. This has the side benefit of making the code work on
Windows. That's merely a nice to have for -nogui 1 detection for now,
but will be essential in the next commit.
Reported-by: Jake Mercer <jake.mercer@civica.co.uk>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This will be used to deal with the Segger shared library in a portable
way in the jlink runner.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make it easier to get a BuildConfiguration from runner code.
Stash the result so it only has to be computed once.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This option has existed since the beginning of the runners package,
which greatly predates the way DT is used in zephyr right now. It
never really worked the way I wanted it to but it's too much work to
fix it now. Try to improve the help a bit at least while I'm looking
at it again.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Copy a fix from test_nrfjprog.py to the other runner test suites. The
current code will enter an infinite recursion if you hit the path
where os.path.isfile is called, since it's been patched to
os_path_isfile_patch in the calling context. The fix is to cache the
'real' version in the parent scope and call it directly as a fallback.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix buffer leak in L2CAP and SMP when attempting to send over a
a connection that has been disconnected.
Both L2CAP and SMP now have ownership of the buffer in case of failure
to send it and need to unref it in case of send failure.
Change the return type of bt_l2cap_send since the user of this function
has to handle releasing of the buffer when this fails.
Regression from: a77f809faa
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the comment about bt_l2cap_send_cb not being able to fail when
called from RX thread. It will fail in the case where the connection
has been disconnected.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improved the documentation for the ISO data paths, as well
as making the bt_iso_setup_data_path function a bit more
clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since we are only setting up a single data path for
broadcasters (either receive or transmit), we should
only remove that same path.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BIGinfo reports were almost identical to the
periodic advertising reports when printet. Updated to
mark the start of the line with BIGinfo.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When setting the iso data path for a BIS, it shall only be set for
one direction (depending on whether we are a broadcaster or
a receiver).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For non-specified archs, including those out-of-tree, the possibility to
use a specific implementation has been reintroduced.
CONFIG_ATOMIC_OPERATIONS_ARCH must be selected to utilize this.
Signed-off-by: Tommie Skriver <tosk@demant.com>
This adds FPU sharing support with a lazy context switching algorithm.
Every thread is allowed to use FPU/SIMD registers. In fact, the compiler
may insert FPU reg accesses in anycontext to optimize even non-FP code
unless the -mgeneral-regs-only compiler flag is used, but Zephyr
currently doesn't support such a build.
It is therefore possible to do FP access in IRS as well with this patch
although IRQs are then disabled to prevent nested IRQs in such cases.
Because the thread object grows in size, some tests have to be adjusted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add the exception depth count to tpidrro_el0 and make it available
through the arch_exception_depth() accessor.
The IN_EL0 flag is now updated unconditionally even if userspace is
not configured. Doing otherwise made the code rather hairy and
I doubt the overhead is measurable.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
CONFIG_FPU: The architecture dependency list is redundant.
Having CPU_HAS_FPU being selected by those archs as a dependency
is sufficient and cleaner.
CONFIG_FPU_SHARING: The default should always be y to be on the safe
side here, but as a compromise for not affecting existing config, let's
move the default selection local to those configs that care, again to
avoid a growing list of conditionals here. Adjust the help text which
applies to more than just Cortex-M.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add data barrier before and after dcachle flush or clean,
and restore to data cache level 0 after all ops.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Moved all assembly code to c code. Fixed arch_dcache_line_size_get()
to get dcache line size by using "4 << dminline" and don't consider
CWG according to sample code in cotexta-v8 programer guider.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Configure board clocks using device tree.
Bus clocks configuration part is kept common to both cores.
On core dedicated configuration we find:
- Specific sysclock freq on both cores
- Sysclk input clock selection on M7 core only (as per existing
clock_control driver behavior).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32h7 clock_control driver to make use of macros allowing
dts based configuration in coexistance with existing Kconfig method.
Note: Use of IS_ENABLED is removed as it generates warnings in
checkpatch. This checkpatch behavior needs to be reviewed but may
first require a little clean up of IS_ENABLED macro.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix bt_le_oob_set_legacy_tk excluded when Legacy OOB pairing is
supported. We still support legacy OOB when
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY is not defined.
It is only when we disable Legacy pairing that it is not included.
Check that the OOB data type is in fact Legacy OOB before calling
bt_le_oob_set_legacy_tk.
Log an error if the OOB type was not handled by the callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
BT support requires lots of PROVIDE calls that cannot
be added into this linker file. All necessary includes
were moved into hal module to proper handled as needed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Information about which block protect bits are set on power-up is not
inferable from SFDP content, so we need the devicetree config pointer
to get the has-lock property value even when SFDP data is read at
runtime.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add downlink callbacks on a per-port basis. A single message will be
handled as many times as users have registered matching ports. Callbacks
will also be run on "meta" downlink packets on port 0, such as confirmed
uplink acknowledgements.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Coprocessor sample was lacked of test configuration which makes
buildkite/zephyr to fail. This commit fixes it by providing test
configuration for this sample.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The device has sent RESET_POWER_UP message before the communication
with the host hadn't been established. It could be observed with
pyspinel which displayed `Framing error`.
This commit fixes the bug by initializing NCP after the host stated
is ready to communicate.
This commit reverts initialization the USB stack into function
otPlatUartEnable to be consistent with others OpenThread platforms.
OpenThread co-processor samples are not affected by #27071 as they use
USB for SPINEL communication with host and not for UART console.
Note:
When co-processor communicates by USB CDC ACM and it is hard reset
(what is happening in current Zephyr OpenThread platform)
the connection needs to be properly handled by the host.
For posix platform used together with RCP it was implemented in:
https://github.com/openthread/openthread/pull/6454
and for NCP:
https://github.com/openthread/wpantund/pull/492 .
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread modified its NCP API, so we need to align with these changes
in Zephyr.
One of the major changes was removal of UART from the platform APIs.
`openthread/platform/uart.h` header file was moved to
`examples/platforms/util/uart.h` so we need to use the new location in
Zephyr. This means that OpenThread no longer impose the UART API but for
the simplicity of the upmerge I've kept the UART APIs as they are for
now.
The NCP initialization function have now to register a send handler,
and the appropriate transport driver have to call NCP callbacks when
transmission/reception is done. For now, re-use the existing code of
the UART driver, just as the upstream NCP application does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use OpenThread mutex in order to protect OT CLI API call instead of
halting the OpenThread thread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The OpenThread CLI API has changed therefore it's needed to align
OpenThread Shell implementation in Zephyr with these changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During configuring the low-voltage power supply of IO pads, the npcx
GPIO driver needs to set the related PORTx_OUT_TYPE bit to 1, i.e.
select to 'Open Drain IO type', also. This CL provides a mechanism that
configuring these bits via 'def-lvol-io-list' node automatically in case
the flag of gpios that have been configured to low-voltage power supply
doesn't contain GPIO_OPEN_DRAIN.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The memory block passed by the user to the i2s_write function is
tightly packed next to each other.
However for 8-bit word_size the I2S hardware expects the data
to be in 2bytes which does not match what is passed by the user.
This will be addressed in a separate PR once the zephyr API committee
finalizes on an I2S API for the user to probe hardware variations.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update the way test_i2s_state_error_neg test handles
RX overflow.
2. Clean up after test_i2s_state_stopping_neg test in case the
receiving channel is stuck in the STOPPING State if the data
was received prior to calling the STOP trigger.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Allow loopback over different I2S ports
2. Add a config option to indicate if the ports
are separate
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Provide an option to loopback over separate I2S ports
2. Increase the buffer count in the loopback test to 4
3. Update test_i2s_transfer_rx_overrun test on how to
handle RX overrun failures
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update the SDK API's called in the configure implementation.
The DMA_PrepareTransfer and DMA_SubmitTransfer SDK functions
are not recommneded for use. Replaced the call to these SDK
functions with other SDK API's.
2. Fix the implementation the configure function when multiple
blocks are used.
3. Update the dma_reload implementation. The old reload function
would simply abort the transfer. The new implementation reloads
the DMA buffers for transfer.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Move the STM32F0 specific ram vector table sections into a dedicated
linker snippet included by the new `SRAM_VECTOR_TABLE` symbol.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a new Kconfig symbol that explicitly controls whether the vector
table should be placed in RAM. This eliminates the side effect of
`IS_BOOTLOADER` controlling vector table location. Making the condition
a positive assertion also allows the config to be used in CMakeLists
conditions (`zephyr_linker_sources_ifdef()`, etc).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove the `IS_BOOTLOADER` and `BOOTLOADER_SRAM_SIZE` symbols from the
`nucleo_l053r8` and `nucleo_l031k6` boards. The stated reason for
inclusion is to disable the RAM vector table, however this doesn't apply
to the STM32L0 series, only STM32F0.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Initialize `handle.device` to `None` so that the assert after the
matching has a chance to catch errors. Without this, a failed match will
raise an exception on the line above as it attempts to get a property
that doesn't exist.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
When existing records stored in the NVS are not properly
aligned according to the current flash driver requirements,
fs->data_wra may be initialized with an unaligned address.
Fix the initialization code, so that fs->data_wra is rounded
up to the nearest multiple of the current flash driver block
size.
The situation may occur during a firmware upgrade which
introduces a new flash driver or changes its parameters.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Remove undefined functions (unsued anymore).
Add missing stub implementation for new DF related radio functions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Radio configuration API that gives possiblity configure
reception and sampling of CTE.
Part of alrady implemented API was re-factored to comply
with new API and do complete initialization of registers:
DFECTRL1 and CTEINLINECONF.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The network tests were expecting that network interfaces
are in certain order. As we cannot guarantee that, refactor
the tests like this:
* if test is using DUMMY L2 driver, then disable Ethernet L2
and fetch only DUMMY L2 instead of default interface
* if test is using Ethernet L2 driver, then make sure that the
test is using the Ethernet interface specified in the test
instead of the one provided by the DUT
Fixes#34505
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds the bits to the gen_mmu.py script so that extra mappings
can be added with caching disabled. This is useful for mapping
MMIO regions where caching is not desired.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit enables flash support for stm32h747i_disco_m7
in device tree. This has been tested with flash sample
application on stm32h747i_disco platform with m7 core.
Flash is shared between two cores (M4 & M7) so the last 1M is
assigned to M4 core. Hence allocating 1M of storage at the
end of first 1M.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
There is a possibility that the DWT frequency calculation
is divided by zero. So this fixes the issue by repeatedly
trying to get the delta clock cycles and delta DWT cycles
until they both are not zero.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is a possibility that the TSC frequency calculation
is divided by zero. So this fixes the issue by repeatedly
trying to get the delta clock cycles and delta TSC cycles
until they both are not zero.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The use of device_pm_control_nop is deprecated so remove it
from the test as it will give warning in CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add binding fro stm32wl-rcc.yaml that derivates from stm32wb-rcc.
Additionally update stm32wb-pll-clock.yaml to be used as well
for stm32wl series and add missing div-m property.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for STM32L0 clocks bindings.
Also, add a small tweak to SYSCLK selection to factorize some lines.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add clocks node and clocks to stm32l5 series.
PLL binding is reused from stm32l4 series.
Matching binding is updated to document that.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add clocks nodes for F0/F3/G0/G4 series.
For F0 and G0 series, update compatible for rcc node
to specify use of dedicated "st,stm32f0-rcc" compatible.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add bindings for F0/F3/G0/G4 clocks.
Introduce new rcc binding "st,stm32f0-rcc" binding
that describes RCC hardware blocks that don't have
"apb2-prescaler".
This binding also applies to G0.
Binding "st,stm32f0-pll-clock" is used for both F0
and F3 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add PLL bindings for STM32F1 devices.
- Main PLL binding for STM32F1 non connectivity lines
- Main and PLL2 binding for Connectivity lines (F105/F107)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To allow transition to device tree based clock configuration on
stm32 targets, rework clock_control driver to use intermediate
STM32_ macros initially defined as the equivalent Kconfig macros
for now.
Propagate the change in all code using these macros.
The reason to introduce these new macros instead of configuring
Kconfig flags using dt kconfigfunctions is that we'll need
to be able to inform users that Kconfig flags are deprecated
once the whole family conversion is done, to encourage
out of tree users to adopt this new configuration scheme.
Note: For now STM32H7 series and code is excluded.
This is the same for some series specific code such as
PLL mul/div for L0/L1 and XTRE prescaler on F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add configurable attached event delay. Delay can be used to give
USB Charging Controller time for initialization.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Logging failed to compile when --no-gc-sections is used because
log_core is conditionally calling mpsc_pbuf.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When PROVISIONER and CDB is enabled then IUT couldn't be a NODE.
This patch fixes this by not returning an error when CDB is not
configured. This is useful especially in testing environment, when all
the features are compiled in and we can choose role in runtime.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Add support for u-blox EVK-NINA-B4, which uses the nRF52833
This board is similar to the nrf52833dk_nrf52833, though it
uses a u-blox NINA-B40x openCPU module with DC-DC support
included.
Simplified pwm LED aliases
Corrected LED assignments for red, green, and blue
Addressed review comments (spi & gpio 0 0)
Tested with blinky, button, and Bluetooth peripheral_hr
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Since the API already has a function to create an LwM2M object instance,
it makes sense to add a corresponding delete funtion, allowing the
application to delete created objects.
Additionally, for the remote delete set the Registration Update trigger
only when not in bootstrap mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Registration Update message should be sent whenever an object
instance is created or deleted. Currently this was only the case when an
object instance was created by the server and not by the application.
Fix this by triggerng the Registration Update from the API function
as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When I added this board recently I mistakenly placed
the Arduino SCL pin (Default Zephyr pin) as PB6
when it should be PB8.
The SPI node is now properly set to SPI2 peripheral
instead of SPI1. SPI2 is the most suitable to follow
the silkscreen on the printed circuit board.
Added arduino_gpio to yaml.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
This PR increases the OpenThread stacks to compensate
for the runtime increase of the MPU stack guard
when the usage of the FP context is detected.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
LL_RCC_HSE_EnableBypass() doesn't exist on stm32wl,
but can be replaced by LL_RCC_HSE_EnableTcxo()
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Wrongly places under application_development. We have a CPP subsystem,
so move them under tests/subsys/cpp for consistency.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update configuration of qemu_cortex_m0 to use LF XTAL as low
frequency clock source. Previously used RC requires more
modules to be fetched into the build, including TEMP sensor
used for clock calibration.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test which verifies that when multithreading is disabled
exception as correctly handled by the kernel.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixed to ensure that semaphore is not used by the log core
when multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Spin lock validation is touching threads. Allow only when
multithreading is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This provides the documentation of scope required as a stage towards
removing deprecation for CONFIG_MULTITHREADING=n. The specific lists
of what does work will follow as the code base is inspected and
updated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended mheap_api_concept test suite to support case when
multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended test to validate following functionality:
- k_busy_wait
- k_timer
- irq_lock/irq_unlock
- k_cpu_idle
- SYS_INIT()
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended test to validate that timer API is working as expected
when CONFIG_MULTITHREADING=n.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added support for no multithreading case where test cases are
called directly from main(). On failure in ztest assert macro,
macro returns from the function. It implies that ztest assert
macros can only be called in the test function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Avoid fetching files which use scheduler. By explicitly avoiding
including RTOS specific files we ensure that it is not fetched
accidently.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Ensure that k_heap is not attempt to block the thread when
timeout is set and space cannot be allocated.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Mem_slab supports allocation with timeout which blocks the context
if no slab is available. Updated to treat every timeout as K_NO_WAIT
when multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated timer to not touch thread/scheduler code when multithreading
is off.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
_kernel struct can be used when multithreading is disabled.
In that case sched.c may not be compiled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
K_busy_wait is the only function from thread.c that is used when
CONFIG_MULTITHREADING=n. Moving to timeout since it fits better there
as it requires sys clock to be present.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix index.rst and README.rst to put TensorFlow samples under
External Module samples next to Nanopb sample to avoid 4-level
indentation in the sidebar.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add tests for just introduced dns_resolve_reconfigure() API, which
allows to replace old DNS servers with new ones.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was no dedicated mechanism for replacing DNS servers with
new list. Add dns_resolve_reconfigure() API that allows to achieve that
in a thread-safe manner.
Introduce 3rd state in DNS context lifetime by converting from 'bool
is_used' to 'enum dns_resolve_context_state state'. This new
DEACTIVATING state allows to mark a DNS context as busy and safely close
context without holding lock. Closing DNS context with released lock
prevents deadlock in case net_context_close() has to synchronize with a
separate thread executing handler passed to net_context_recv() (which is
the case for example with ESP-AT WiFi driver).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
ctx->is_used member seemed to be used sometimes within a mutex acquired
block, sometimes not. Make it consistent by always using it with
acquired mutex.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Return NULL instead of return numeric zero for pointer type.
Current usage violates MISRA rule 11.9.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the obj_list element in struct dyn_obj to
dobj_list, to avoid identifier collision with the static
obj_list defined in userspace.c.
Violation of MISRA rule 5.9.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rephrasing away from ain't, which is informal, uncommon, and can
be viewed as substandard or 'slang'.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Make out-of-tree applications transition easier by providing the same
header as before pointing to the new one. Once Zephyr modules are also
migrated this header should produce a deprecation warning if included.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Support the ST STM32G071B Discovery board with STM32G071RBTX SoC
Tested with:
- `samples/basic/blinky`
- `samples/basic/button`
Flashed samples via On-Board ST-LINK with:
- west flash
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
onoff, p4wq, and sem had several places missing final else
statement in the if else if construct. This commit adds
else {} to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
heap* had several places missing final else statement in the
if else if construct. This commit adds else {} to comply with
coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
cbprintf_* had several places missing final elsestatement in the
if else if construct. This commit adds else {} to comply with
coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
In order to ensure backward compatibility, use the dts config
only if nodes have prop "clocks".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove default pll settings to ensure pll users are correctly
configuring all prescalers on purpose and avoid surprises.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This adds a sample application on dictionary-based logging.
The README file includes instruction on how to run the log parser
to generate human readable log messages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new UART backend for dictionary based logging,
where this can output binary data in both binary and
hexidecimal strings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds dictionary based logging support. Dictionary based
logging is binary based where one big difference is that
static strings are stored as pointers instead of the whole
string. This results in reduced space requirements for
storing log messages in certain scenairos.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
NIOS2 is using _image_rodata_start/_end in its linker script
to mark the boundaries of rodata. So they no loner need
special treatment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
NIOS2, RISC-V and SPARC are using _image_rodata_start/_end in
their linker scripts to mark the boundaries of rodata. So
they no loner need special treatment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds missing handling of the m_interval and m_latency if tx QOS is
not set, and handling of the s_interval and s_latency if rx QOS is
not set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a test case to validate when adding a new partition into a memory
domain with over its maximum specified limit number, an assertion
failure happens.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add aliases for setting function properties. A function may have 0, one
or more function properties. Example usage:
@funcprops \isr_ok, \async
These aliases will translate to API Terminology references when Doxygen
is rendered on Sphinx. On the Doxygen side they will just translate to
plain text.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Coverity is complaining about sizeof(v + 0) and it is used
here intentionally to promote variable. Added comment that should
suppress this error in the future.
Note that this macro will be used in all log messages so without
solving it before logging v2 is merged there will be a flood of
errors.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Limit the maximum SPI frequency to that supported by the instance
hardware. This stops peripherals supporting >8MHz on slow instances
from wrapping around on the clock frequency for undefined behaviour.
Fixes#34402
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Currently the lwm2m_path_log_strdup allocates a temporary buffer on a
stack, and then passes it to the log_strdup function to create a copy
of the string for the logger. log_strdup however will not copy the
string if for instance immediate logging is used, therefore the logging
function will still use the memory address of the already invalid buffer
allocated within lwm2m_path_log_strdup.
Fix this by passing an addittional `buf` parameter to the
lwm2m_path_log_strdup function, therefore allowing the user to provide
the buffer within a valid scope.
CID: 220536
Fixes#34005
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
zsock_select() cannot poll file descriptors with number >= 32.
When a whole word in FD_SET was skipped due to being empty,
corresponding fd number was not updated, leading to wrong
fd's being passed to poll().
Fixes#34563
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
We have been adding process related docs in different places.
Consolidate them under one section in the docs and rename the top level
section to reflect that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The comment in this test says that it cannot use ztest, as the latter
spawns some threads. However, still format the output in a way
compatible with ztest output, by using tc_util.h macros. This is
similar to a few other tests which can't use ztest library directly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Apparently, this test cannot be immediately converted to ztest, but
make the output match the standard ztest format, by wrapping it in
a testsuite brackets. (Also, "cleanup" testcase name, TC_END_RESULT
uses __func__ as the name, so just pass __func__ to TC_START either).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We have a few remaining tests where ztest module is not used directly,
and instead lower-level tc_util.h is used (where ztest also uses that
header). Supposedly, there're good reasons for that. However, tc_util.h
tests have output which is somewhat inconsistent with ztest output,
which may be a problem with automated parsing of test results, e.g. in
CI systems.
So, factor out code to mark testsuite start/end from ztest.c to
tc_util.h as TC_SUITE_START() and TC_SUITE_END() macros, to allow
tc_util.h based tests to produce output fully consistent with
ztest, while avoiding duplicate of code. TC_SUITE_END() accepts
result code (TC_PASS/TC_FAIL), similar to existing TC_END_REPORT().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Found out that important requirements are not tested by current
kernel objects tests. Decided to fix that situation
New added tests:
1. test_kobj_assign_perms_on_alloc_obj()
Create kernel object semaphore, dynamically allocate it from the
calling thread's resource pool.
Check that object's address is in bounds of that memory pool.
Then check the requestor thread will implicitly be assigned
permission on the allocated object by using
semaphore API k_sem_init()
2. test_no_ref_dyn_kobj_release_mem()
Dynamically allocated kernel objects whose access is controlled by
the permission system will use object permission as a reference count
If no threads have access to an object, the object's memory released.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Extend the number of available initializers for the `struct
gpio_dt_spec` with:
- GPIO_DT_SPEC_GET_BY_IDX(): allows initialization from a specific index
- GPIO_DT_SPEC_INST_GET_BY_IDX(): instance version of
GPIO_DT_SPEC_GET_BY_IDX()
- GPIO_DT_SPEC_INST_GET(): instance version of GPIO_DT_SPEC_GET()
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This information is useful to the automation framework when implementing
tests where the IUT is the provisioner and the test uses two PTS
instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
hsdk has an on board cy8c95xx I/O expander, and 4 on
board LEDs use the expander GPIO. Add the I/O expander
and LEDs in hsdk dts, then add documents for them.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The NPCX power management code gets a compile error if CONFIG_PM is
enabled but CONFIG_ARM_MPU is disabled.
Signed-off-by: Keith Short <keithshort@google.com>
This commit replaces driver hard coded clk bus and enr definitions with
definitions from device tree.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit fixes missing pclken member if used for h7 series.
Additionally to the check if instance 0 of compatible
st_stm32_flash_controller has defined a clock,
this needs to be checked for compatible st_stm32h7_flash_controller.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds flash clock settings in device tree for stm32h7
series such that the stm32h7 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
It was found that npcx7 series' GPIOs which support low-voltage power
supply, there is an excessive power consumption if they are selected to
low-voltage mode and their input voltage is 1.8V.
To avoid this excessive power consumption, this CL suspends the
connection between IO pads and hardware instances before ec enters deep
sleep mode. Then restore them after waking up.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Switch to the new API. Adds early exits for the ack and retransmit
timers, and replaces a remaining_time() + submit() call with schedule().
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new API. Consolidates reliable sending logic for the first
transmission and the retransmit into one. Adds check for link active in
protocol timeout.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Friend structure allocaction logic is implemented over and over
throughout the friend module. Move it into a static utility function for
readability.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
No area can have 'status: maintained' without a maintainer.
Mark such areas as 'orphaned' instead.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Breathe project has released version 4.29.1, a fix release for the
issues found in 4.29.0. Relax version requirements by just skipping the
buggy version and staying to compatible releases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add GIRQ source definitions
ECIA register structure update
Add missing ADC register field defines
Fix GPIO alternate function field mask
Add Analog comparator register defines
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
work_queue_main() was missing final else statement
in the if else if construct. This commit adds else {}
to comply with coding guideline 15.7. Includes a
context-specific description of why this branch is empty.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_timeout_end_calc() was missing final else statement
in the if else if construct. This commit pulls the last
condition into a final else {} to comply with guideline
15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
set_endpoint() and reset_endpoint() were missing final
else statement in the if else if construct. This commit
adds a final else {} with assert to comply with coding
guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
cleanup_test() was missing final else statement in
the if else if construct. This commit adds else {}
to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The lib/os/ had several places missing final else
statement in the if else if construct. This commit adds
else {} or simple refactor to comply with coding guideline 15.7.
- cbprintf_complete.c
- cbprintf_nano.c
- heap-validate.c
- heap.c
- onoff.c
- p4wq.c
- sem.c
Also resolves the checkpatch issue of comments should align * on
each line.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
register_events() and signal_poll_event() missing final
else statement in the if else if construct. This commit adds
else {} to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_tmcvt() was missing final else statement in the
if else if construct. This commit removes the
else if in this small structure to comply with
guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
bus_fault() and hard_fault() were missing final else statement
in the if else if constructs. This commit adds non-empty else {}
to comply with coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
z_arm_debug_monitor_event_error_check() was missing final
else statement in the if else if construct so violated guideline
15.7. This commit removes the else if for symmetry in the limited
early-exit conditions, rather than empty final else {}, to comply.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
- If device PM is not supported -ENOSYS is returned, update test case to
account for that
- Remove usage of device_pm_control_nop
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Devices that do not require PM should just use NULL.
`device_pm_control_nop` is still kept as an alias to NULL untill all
in-tree usage is replaced with NULL.
Code relying on device_pm_control function now returns -ENOTSUP
(equivalent to calling device_pm_control_nop).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for u-blox EVK-NINA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected duplicate pin assignment for i2c1 in dts file
Corrected copyright date in Kconfig.defconfig
Rebase to update test_adc.c
Corrected sda-pin, scl-pin assignments and LED aliases
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Change to use macro DT_FOREACH_CHILD_STATUS_OKAY to avoid routing the
interrupts to the disabled cores.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The macro DT_FOREACH_CHILD will iterates all child nodes ignoring the
status property, this patch changes to use DT_FOREACH_CHILD_STATUS_OKAY
to avoid trying to bring up disabled cores, which only iterates the
enabled child nodes.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Change to load MPID for secondary cores adding offset macro
BOOT_PARAM_MPID_OFFSET.
Currently the code load MPID for secondary cores from offset 0x0
of the struct arm64_cpu_boot_params, it's working as currently
the macro BOOT_PARAM_MPID_OFFSET has value 0x0, but when the
location of the member "mpid" is changed, it can result in SMP
booting failure and the build assert won't throw out any warning.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Due to the use of gperf to generate hash table for kobjects,
the addresses of these kobjects cannot change during the last
few phases of linking (especially between zephyr_prebuilt.elf
and zephyr.elf). Because of this, the gperf generated data
needs to be placed at the end of memory to avoid pushing symbols
around in memory. This prevents moving these generated blocks
to earlier sections, for example, pinned data section needed
for demand paging. So create placeholders for use in
intermediate linking to reserve space for these generated blocks.
Due to uncertainty on the size of these blocks, more space is
being reserved which could result in wasted space. Though, this
retains the use of hash table for faster lookup.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no need to specify linker section for variables in
the output. The compiled object file from the produced
source file will be further processed to have them renamed
anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes: #34368
Now added WEST_PYTHON to list of preferred pythons to check.
WEST_PYTHON is added after PYTHON_PREFER so that a user may still
request a specific python is used by supplying
`-DPYTHON_PREFER=<python>` even when building using `west build`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The error check was removed earlier as it was assumed that
we would either get an error, or the data would be valid.
However, without an error check, we are not guarded
against bad reads.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the output description of the server is empty (legal by the
spec), then we should not return an error to the application
when read. Also added some debug statements when the value is
truncated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes 2 issues:
1) The write callback always returned an error
2) The auto-read of the offset state did not, unlike what the
comment suggested, retry only once and fail on the second attempt,
but rather keep retrying.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a security checks when notifying or indicating, such
that we don't send notifications for characteristics that
require encryption on an unencrypted link.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make some change on two codvar test cases to fit testing under SMP,
and shorter the test cases execution time.
Fixes#33558.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Try to remove CONFIG_MP_NUM_CPUS=1 configuration for the test of
condvar, sysmutex and semaphore, in order to test SMP condition more.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add support for the FVP Base RevC 2xAEMv8A board to be emulated using
the same FVP. For now the virtual platform is only exposing one core and
the basic set of peripherals (GICv3, ARM arch timer, PL011, etc...).
INFO - Total complete: 256/ 256 100% skipped: 933, failed: 0
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Refactor best practices from the API refactoring issue and integrate
them into the existing documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reference the helper macro used to obtain the containing context
structure from a work item pointer within a work handler. Also
document the proper way to do this for delayable work items.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Point out that this macro can be used to avoid the need to initialize
a work item. This is still of limited use since it can't statically
initialize a work item within another structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use queued uniformly when referring to items that are in a work queue,
rather than "pending" which includes items that are scheduled or
running.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The return value is documented to be true if the work was pending, but
the implementation returned true only if the work was actually running
(i.e. the caller had to wait). It should also return true if
scheduled or submitted work was cancelled.
Note that this means the return value cannot be used to determine
whether the call slept.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The NATIVE_TASK macro uses macros from the toolchain header.
Instead of relaying on the header to be included by somebody else,
include it explicity here.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Initializing a work item from its handler will destroy the content of
the kernel structures used to process the work item. This can lead to a
system crash for example when the delayed work is being rescheduled when
the previous run is already queued for processing but not yet executed.
Fix this by initializing the work item once during trickle timer
creation and moving the logic, previously achieved by switching the work
handler, into the new work handler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Do not configure this as a test, this will change footprint drastically
and will skew results and tracking.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce revision for cy8ckit_062_ble board. Revision 0.0.0 represent
the original board schematic which connects Arduino header signals to
PSoC-6 KitProg. The revision 1.0.0 should be used after board rework
to access other serial ports and full Arduino headers.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add pinctrl and interrupt information for both cores. The uart-6 is
the default serial communication on the kit connected to m0 core. It
uses SCB[6] and the NVIC line 21 as interrupt source on Cortex-M0+ cpu.
The line 21 is an arbitrary value and users can select any value. The
SCB[6] shares pins with Arduino headers D8/D9. It may be necessary an
USB serial converter to sample signals and enable Zephyr console on PC.
The uart-5 is the default serial communication port for m4. It is
connected to Arduino serial line. A HW rework may need to allow
Arduino header to be useful.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add pinctrl and interrupt information for both m0/4 cores. The uart-5
is the default serial communication on the kit and it is connected to
Cortex-M0+ cpu. It uses SCB[5] and the NVIC line 21 as interrupt
source on Cortex-M0+ cpu. The line 21 is an arbitrary value and users
can select any value. The SCB[5] shares pins with Arduino headers
D0/D1 and it is wired with the on-board USB Serial converter. This
means, if use wants use an external shield it must rework the board.
The uart-6 is the default serial communication for Cortex-M4 cpu, which
uses SCB[6].
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Current Cypress PSoC-6 serial driver only works using polling mode.
Add serial driver interrupt routines to allow use of interrupts.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
The current serial driver uses hard code configuration. Rework driver
to use pinctrl and enable full configuration from device tree.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add pinctrl-0 properties for configuration of UART, I2C, SPI, FTM,
DAC, ADC, ACMP, and PWT peripherals. These settings are based on what
is defined in the board/pinmux.c file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a function that uses the JESD216 SFDP BFP DW16 Enter 4-Byte
Addressing parameter to put the device into 4-byte addressing mode if
one of the entry modes that's supported by the driver is available on
the device.
Perform the transition if SFDP data is provided (either by devicetree
or at runtime), or if a special devicetree property provides the entry
mode descriptor.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Support both 24-bit and 32-bit address values when constructing the
device command. Note that some commands require 24-bit address
regardless of mode, and some require 32-bit addresses regardless of
mode, so provide command-specific overrides of a generic (but not yet
configurable) default address size.
With this we no longer need a special interface for READ_SFDP which
uses a 24-bit address but with a wait state introduced by clocking out
a fifth command byte.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This driver abstracts most access through a generic function that
supports both read and write with and without address components in
the command. Rework this so that instead of distinct arguments
specifying the combination of features there's a flag set that will
allow more combinations to be specified.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fixes#29915.
Implements the memory layout and MPU configuration for Ethernet buffers
for STM32H7 controllers as recommended by ST. 16 KB of SRAM3 are
are reserved for this. The first 256 B are for the RX/TX descriptors and
configured as strongly ordered, shareable memory. The rest is for RX/TX
buffers and configured as non cacheable memory. This configuration is
automatically applied for H7 chips if the SRAM3 memory is enabled in the
device tree.
Signed-off-by: Mario Jaun <mario.jaun@gmail.com>
When building and running the rpmsg_service sample on MPS2 AN521
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building and running the openamp sample on MPS2 AN521,
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to have dependencies any more on !OPENAMP
for BUILD_WITH_TFM in the mps2 an521 target, because we
now have different targets for the non-secure version of
the board and the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a new target for MPS2 AN521, called mps2_an521_remote.
This target is used in dual image MPS2 AN521 builds, for
the 'remote' target. It is indentical to mps2_an521_nonsecure,
except for the fact that it does not enable TrustZone-M and
it does not set the security domain to Non-Secure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Kconfig symbol is used in hal_stm32 module to define Cube HAL
symbol HSE_VALUE (cf hal_stm32/stm32cube/CMakeLists.txt).
Due to this specific usage, this symbol should be kept. As a
consequence it could not be replaced by dts equivalent but we can
use dts to configure it.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Optionally configure Kconfig SYS_CLOCK_HW_CYCLES_PER_SEC using
clock-frequency provided by dt if sysclk node is enabled
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provided nodes reflect the clock tree of each series.
Clock nodes are disabled by default but populated with default
start up configuration. Main reason is the we don't want to
impact boards using Kconfig based clock configuration for now.
Exception to these rules:
- syslck: Default enabled, clock frequency and clock source not
provided
- pll: clock source not provided
This is made on purpose so that errors are triggered if parameters
essential to the board configuration are not provided.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To allow transition to device tree based clock configuration on
stm32 targets, rework clock_control driver to use intermediate
STM32_ macros initially defined as the equivalent Kconfig macros
for now.
Propagate the change in all code using these macros.
The reason to introduce these new macros instead of configuring
Kconfig flags using dt kconfigfunctions is that we'll need
to be able to inform users that Kconfig flags are deprecated
once the whole family conversion is done, to encourage
out of tree users to adopt this new configuration scheme.
Note: For now STM32H7 series and code is excluded.
This is the same for some series specific code such as
PLL mul/div for L0/L1 and XTRE prescaler on F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The timestamp is no longer depending on TX/RX time config
options so move it to separate settings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This value is used to measure the RX/TX statistics. The previous
use of the timestamp field did not work in RX path as the timestamp
value could be overwritten by the driver if gPTP timestamping
is enabled. So to fix the RX statistics, use a separate field
for the create time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user enables CONFIG_USERSPACE, then at least one TX or RX thread
is needed to isolate the application from the kernel space components.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the default behaviour of the networking subsystem so that
no TX or RX threads are created. This will save RAM as there
is no need to allocate stack space for the RX/TX threads.
Also this will give small improvement to network packet latency
shown here:
* with 1 traffic class (1 TX and RX thread)
Avg TX net_pkt (42707) time 60 us [0->22->15->22=59 us]
Avg RX net_pkt (42697) time 36 us [0->10->3->12->7=32 us]
* with 0 traffic classes (no TX and RX threads)
Avg TX net_pkt (41608) time 42 us [0->21->20=41 us]
Avg RX net_pkt (41593) time 31 us [0->9->12->8=29 us]
In this qemu_x86 test run, 40k UDP packets was transferred between
echo-server and echo-client. In TX the speed increase was 30% and
in RX it was 14%.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For testing purposes, add simulated PTP clock device to e1000
Ethernet driver that is used in qemu_x86 board. The PTP clock
does nothing useful as there is no real hw behind this device.
We just emulate the clock in order to do some SO_TXTIME testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the net_pkt creation time just before the actual net_pkt
is allocated in order to get more accurate information for
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that user wants to access PTP clock but does
not need gPTP support. The networking txtime sample does exactly
this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that user wants to access PTP clock but does
not need gPTP support. The networking txtime sample does exactly
this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has set the priority of the sent net_pkt to highest
priority (NET_PRIORITY_CA) and enabled CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO
option, then push that packet directly to driver instead of TX queue.
This will make the TX sending latency smaller for the high priority
packet. This is not enabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This application shows how to use SO_TXTIME option, which can be
used to specify the time when the network packet should be sent
out by the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests are designed to run over the DUMMY interface but when run on
hardware, net_if_get_default() can return the actual hardware
interface.
Fixes: #31969
Signed-off-by: David Leach <david.leach@nxp.com>
If there is a UARTE receive error (e.g. framing or break), the RXTO
event may never come. Check error event too, to avoid an infinite loop.
Signed-off-by: Jim Paris <jim@jim.sh>
This CL adds a override mechanism for pwm module's input clock source
assignment. If the 'clock-bus' property exists, the NPCX_DT_PROP_ENUM_OR
macro function will return an enum upper token value. Otherwise, it
expands to default value in 'clocks' property.
For example, if the users want to select LFCLK as pwm0's input clock,
ths node can be overridden by adding 'clock-bus' property with an enum
string, "NPCX_CLOCK_BUS_LFCLK".
&pwm0 {
status = "okay";
clock-bus = "NPCX_CLOCK_BUS_LFCLK";
};
Signed-off-by: Keith Short <keithshort@google.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
It's easier and safer to parse json file rather than extract
total size from stdout
Now the .json file has two keys:
{
"symbols": {
"children": [
...
],
"identifier": ":",
"name": "root",
"size": 2220
},
"total_size": 34272
}
Signed-off-by: Jingru Wang <jingru@synopsys.com>
i2s1 is not present in all stm32f4 series. So moving the i2s1 node
from the top level stm32f4 dtsi file to the stm32fxx specific dtsi
files. Also in stm32f429zi, the sequence starts from i2s2, this commit
helps in having the right channel number.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Add dts nodes for onboard devices that have drivers in zerphyr src
- Add PWM for all leds
- Add LSM303AGR sensor node
- Add LSM303DLHC node for PCB rev B
- Create PCB rev B overlay and make PCB rev D default.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
After the introduction of usart1 the kernel/genisr_table test could
no longer build, due to an interrupt conflict.
Adopt the TEST_NUM_IRQS to resolve the conflict.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Adds nucleo_g071rb board to the uart_async_api test.
Therefore additionally add usart1 in board definitions.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Fix stm32_dma_is_irq_active not checking the IRQ status(IsEnabled) for
active interrupts.
While the transfer-complete, half-transfer comp. and transfer-error
is_XX_irq_active() functions check for IRQ status (IsEnabled),
ORing the result with dma_stm32_is_gi_active() overrides the
status check as gi is always 1 in case any of these flags is active.
Related to commit 96c92ed93f.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Enables dma test cases loop_transfer and chan_blen_transfer
on stm32g03116_disco, nucleo_g071rb and nucleo_g0b1re.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Use LL_DMAMUX_CHANNEL_x defines instead of DMAMUX_CSR_SOF7x to check
if corresponding LL_DMAMUX_IsActiveFlag_SOx and LL_DMAMUX_ClearFlag_SOx
inline functions exist and should be added to func_ll_is_active_so[]
and func_ll_clear_so[].
The HAL of some socs uses the same flag to decide which registers exist
on a specific soc. And the same defines are used for table_ll_channel[]
initializations.
This is necessary because DMAMUX_CSR_SOF5 and DMAMUX_CSR_SOF6 were
wrongly added in the HALs soc header file for some stm32g0 socs,
therefore without this change some stm32g0 socs couldn't compile.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Update the existing driver to support STM32G0 series.
It enables the DMA_STM32_SHARED_IRQS flag for g0 series, such that
all interrupts are handled in a shared isr to avoid irq conflicts.
The shared isr is extended to be able to handle irqs from more than one
dma instance.
Furthermore the config_irq function of instance 1, which connects to the
irqs, was reworked to avoid irq conflicts when 2 dma instances on
stm32f0, or stm32g0 are enabled:
While dma1 has one exclusive irq for channel 1, and one irq for dma1
channels 2 and 3, all other channels share the same irq.
Therefore it is currently not possible to enable dma2 without enabling
dma1 at the same time, without getting an build errror due to an irq
conflict.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Not all STM32 Series can enable a dedicated clock for dmamux.
In stm32g0 series for example the clock is enabled automatically
as long as either DMA1 or DMA2 is enabled.
This commit changes dmamux driver to cope with socs that don't have
defined a clocks property. Therefore it moves the config(and data)
struct into the c file to be able to use DT_INST_NODE_HAS_PROP macro.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
STM32G0 is supported by the st,stm32-dma-v2 driver.
This commit adds dma1 and dmamux dts bindings
for stm32g03x, stm32g05x and stm32g07x.
For stm32g0bx additionally dma2 is added.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
In case of ARC MWDT toolchain and C++ support enabled the Zephyr .init*
section conflicts with .init* sections derived from toolchain libs.
Let's add 'z_' prefix to Zephyr .init* section (and therefore .device
section as they share the same macros) to make Zephyr section name
unique.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
It has been seen that when net backend is enabled stack usage
is around 1080. Setting 1152 as the default.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Kconfig symbol NFCT_PINS_AS_GPIOS may be defined for all
Nordic nRF SoCs that have the NFCT hardware, so we move
the option definition in nRF common Kconfig file. Also,
we correct the help text to reflect that nRF52 series DKs
and nRF5340 DK have different pins for NFC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The configuration is based on
the f303k6 and the ST reference manual.
I had successfully tested the following sample code:
blinky
blink_led (uses TIM2_CH2 on PB3)
hello_world
Signed-off-by: Sebastian Schwabe <sebastian-schwabe@gmx.de>
This commit adds the soc config for the STM32F031k6 and STM32F031X6.
Add the STM32F031k6 as choice to the Kconfig.soc.
Signed-off-by: Sebastian Schwabe <sebastian-schwabe@gmx.de>
Exit latency time should never be greater than the residency time.
Just add an assert in case the policy does not properly handle it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_power_state_force no longer requires the idle thread to run.
Just removing the following k_sleep for two reasons, first it is
not necessary, second it tests that pm_power_state_force works
as it should.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_power_state_force no longer requires the idle thread to run. Just
removing the following k_sleep for two reasons, first it is not
necessary, second it tests that pm_power_state_force works as it
should.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Set the timeout to expire "exit_latency_us" earlier to the CPU be
capable of honor the next scheduled event.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Using more realistic values to avoid confusion and make it clear the
distinction between min-residency-us and other idle properties like
exit-latency-us.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Exit latency is the maximum time required by a CPU to transition from
a specific idle state to active state. This information is going to be
used to properly configure the wake up event in order to the system be
able to execute the next scheduled task.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Moves the callback structure for VOCS to the register function
which is renamed from init, as there's no reason to register
the callbacks separately.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In SMP, MPID is mybe not equal to cpu logic ID, so can't
use MPID to get rdist base address from gic_rdists[], this
patch get logic ID from arch_curr_cpu()->id, and
find current CPU's rdist base address from:
gic_rdists[cpu_logic_id]
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Only run gen_handles.py if CONFIG_HAS_DTS is set. This enables vendors
without device tree implementations to compile without the generated
dependencies.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For a zero-length transfer, the STOP task is not triggered
automatically by the shortcut with the event that signals
the transfer end because such event is not generated.
Trigger this task "manually" to prevent the driver getting
stuck after the address byte is acknowledged.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for delayed transmission of frames for the CSL
Transmitter OpenThread function.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The z_timeout_end_calc function was replaced by
sys_clock_timeout_end_calc in #33302. A reference to the old function
snuck into master through #30015.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Datas in data cache are dirty before data caches are enabled,
so need to invalidate all data caches firstly before enable
them.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
When BT and WiFi coexists, IRAM usage increases a lot.
Add configuration that allow wifi symbols
to be placed in flash, freeing space in IRAM.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When printk is redirected to the logging it is using level 0.
Level 0 was missing a define used for detection of function
prefix use which lead to compilation failure when logging v2
was used with CONFIG_LOG_PRINTK=y.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Arguments for UTIL_CAT were accidentaly concatenated instead of passed
separated by comma.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Avoid possibly overflowing maximum interval when calculating interval
with preferred periodicity.
Changed calculation to round down from maximum interval and reset to
maximum in case of underflowing minimum interval.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Perform null check of default_conn in call cmd_conn_update()
and cmd_conn_data_len_update() in ./subsys/bluetooth/shell/bt.c
Signed-off-by: Kai Ren <renkaikaiser@163.com>
The net_shell only uses iface_flags2str when CONFIG_NET_NATIVE is
enabled. Disabling this produces an "unused function" warning for this
function. Wrap the function in an #ifdef to silence the warning for this
configuration.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
em_starterkit has ICCM at 0x0 address, access to 0x0
address doesn't generate any exception, so we access
to 0xFFFFFFFF address instead to trigger exception.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RX statistics might not get updated properly because the used
ifdef was referring the TX options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a note in the board documentation regarding the
correct size of the available flash and sram memory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In Cortex-M, SVC exceptions are used by the kernel
for system calls, run-time exceptions and IRQ
offloading. Correct the respective information in the
boards documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Inline some minor clarifications regarding the
Lazy Stacking feature in the cortex-m pendSV
handler, for ease of understanding. Also, fix
some minor style issues in comments.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The conn_raw_input() in connection.c will clone the incoming
packet so that it is possible to receive socket data in
multiple packet sockets. This is all fine except that if the
socket is never calling recv(), then the cloned net_pkt is never
processed and we will have a memory leak.
What this all means in practice, is that we should call recv()
for every packet socket in order to flush the socket for any
incoming data even if the socket is just sending data.
Fixes#34462
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Query timeout handler is rescheduled if DNS context mutex is locked. So
far there was no timeout used, which means that work is simply put at
the end of system workqueue. This solves cases when mutex is locked by
any higher priority cooperative threads.
If however mutex was locked in application code within lower priority
thread (which is very likely) and query timeout has expired in the
meantime, then system workqueue is busy looping by calling query timeout
handler and trying to acquire DNS context lock.
Reschedule query timeout handler with 10ms delay, so that all
threads, including those with lower priorities, have a chance to move
forward and release DNS context lock.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
TWDT0 is loaded with a new value and the counter restarts counting with
it by written RST bit in Timer Control register (T0CSR) to 1. Then, the
RST bit in T0CSR register is cleared automatically on the 2nd rising
edge of T0IN clock. Since TWCP is set to 1:32, the maximum time that RST
bit is unset is 32 * (1 / 32768) ~= 980us.
Polling this bit within a critical section in current npcx watchdog
driver isn't a good approach since it might block the other interrupts
need to service them in time. This CL introduces a timeout mechanism and
removes the critical section to improve this disadvantage. Consider the
clock tolerance, 2 ms is a suitable timeout value for RST bit. We also
remove polling for WD_RUN bit in T0CSR. Npcx watchdog needs serval LFCLK
(32k Hz) clocks to stop watchdog. 1 ms is long enough for the timeout
mechanism.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add additional API to stream_flash that can be used to make
stream write progress persistent using the settings subsystem.
This functionality makes it possible to resume a write operation
after it was interrupted, e.g. by power loss.
Signed-off-by: Jonathan Nilsen <Jonathan.Nilsen@nordicsemi.no>
This commit increases the shell stack sizes when used with
OpenThread shell and the joiner to compensate for enlarged
MPU stack guard.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Adds documentation specifically for empty notification in the
bt_gatt_notify_func_t callback, as that works a bit different
from e.g. reading an empty characteristic.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BT_GAP_PER_ADV_MIN_INTERVAL and BT_GAP_PER_ADV_MAX_INTERVAL
macros in gap.h that are also reference in bluetooth.h and
used for parameter validation in adv.c.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moved sdu_interval struct members from llcp_cis to cis group,
to match spec and enable access by ULL
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch adds flash clock settings in device tree for stm32wb
series so that the stm32 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This patch adds flash clock settings in device tree for stm32l4
series so that the stm32 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This patch adds flash clock settings in device tree for stm32l1
series so that the stm32 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This patch adds flash clock settings in device tree for stm32g4
series so that the stm32 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This patch adds flash clock settings in device tree for stm32g0
series so that the stm32 flash driver can get the clock settings
from this dtsi file.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
When selecting a random count for blink, beep or vibrate, the Bluetooth
Mesh Profile Specification v1.0.1, section 5.4.2.4 states: "the device
shall select a random integer between 0 and 10 to the power of the
Authentication Size exclusive".
This means that if size is 1, the integer should be in the range 1-9,
while the implementation chose an integer in the range 0-9. Reduce the
range and add 1 to the num to correct this for these actions.
Fixes#34209.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix undefined referenc to bt_le_adv_lookup_legacy in bt_le_oob_get_local
when bt_le_oob_get_local is used in a central only application.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add register address including external timer and watchdog(ETWD),
general control(GCTRL), serial peripheral interface(SPI).
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The ARM64 port is currently using SP_EL0 for everything: kernel threads,
user threads and exceptions. In addition when taking an exception the
exception code is still using the thread SP without relying on any
interrupt stack.
If from one hand this makes the context switch really quick because the
thread context is already on the thread stack so we have only to save
one register (SP) for the whole context, on the other hand the major
limitation introduced by this choice is that if for some reason the
thread SP is corrupted or pointing to some unaccessible location (for
example in case of stack overflow), the exception code is unable to
recover or even deal with it.
The usual way of dealing with this kind of problems is to use a
dedicated interrupt stack on SP_EL1 when servicing the exceptions. The
real drawback of this is that, in case of context switch, all the
context must be copied from the shared interrupt stack into a
thread-specific stack or structure, so it is really slow.
We use here an hybrid approach, sacrificing a bit of stack space for a
quicker context switch. While nothing really changes for kernel threads,
for user threads we now use the privileged stack (already present to
service syscalls) as interrupt stack.
When an exception arrives the code now switches to use SP_EL1 that for
user threads is always pointing inside the privileged portion of the
stack of the current running thread. This achieves two things: (1)
isolate exceptions and syscall code to use a stack that is isolated,
privileged and not accessible to user threads and (2) the thread SP is
not touched at all during exceptions, so it can be invalid or corrupted
without any direct consequence.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This change enables A, C, D, E, G, H, I, J, K, and L groups,
and fix gpio interrupt function.
This change also pull (and rename) dt-bindings/irq.h to
dt-bindings/interrupt-controller/ite-intc.h, because it is
chip-specific.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Change-Id: Ifee039981c2cc4cf5980e663702a9921e629fc1e
With balancing in twister fixed, reduce matrix size for now, since we
are running tests only for native_posix.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do calculation based on what is actually going to be run and evaluated
at runtime, ignore the cases we already know going to be skipped.
This fixes an issue where some sets would get majority of skips and
basically run nothing beside filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
NPCX PWM supports output buffet select to push-pull or open-drain. Add
output buffer select option 'drive-open-drain' in devicetree for NPCX
PWM. If set, the PWM output will be configured as open-drain. If not
set, defaults to push-pull.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
During polling ITEN bit to make sure ITIM timer is enabled, we might
have the chance that npcx_itim_evt_enable() return fake error when
timeout expired but ITEN bit is set already if CONFIG_ZERO_LATENCY_IRQS
is enabled. (Since SVCall's interrupt priority is not the highest, the
other interrupts with IRQ_ZERO_LATENCY flag could preempt CPU resource
at this moment.)
In order to prevent return fake error code, this CL adjusts the check
conditions for ITEN bit and timeout.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
NPCX host access IRQ enables before entering deep sleep. The pending
bit lets chip wake up from sleep immediately. Clear host access IRQ
pending bit before enabling.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
When compiler results are piped through a non-terminal (e.g. ninja)
the compiler disables colour diagnostics. Using `-fdiagnostics-color`
forces the compiler to enable colour output. This flag is always
enabled for clang and gcc.
Setting `CONFIG_COMPILER_COLOR_DIAGNOSTICS=n` disables this
feature and reverts to plain diagnostic messages with no formatting.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
With some additional macro-magic we can remove the CMake-based header
file template feature, and instead take advantage of the usual
DT_INST_FOREACH_STATUS_OKAY() macro.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no boards that need hard-coded interrupts so just remove this
build-time conditional branch. The way going forward is that all PCIe
devices should always use PCIE_IRQ_DETECT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Logging attempts to do most of the work at compile time instead
of preprocessor by using conditions which can be resolved at
compile time (e.g. if (IS_ENABLED(...))). Apparently, such extensive
use significantly loads the compiler since all paths are compiled
even though cut from final binary. Patch reduces it by replacing
some compile time switch with preprocessor.
Handling of function name prefix has been moved to preprocessor.
Immediate logging v2 has also been moved to preprocessor.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
All skips for platforms listed in the .yaml's integration_platforms
will be treated as errors in the integration mode ('-G/--integration').
This feature serves to guarantee a proper testing scope in CI as no
integration platform will be skipped silently.
Fixes#33874
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Move ec_host_cmd.h out of the top level include/ dir into
include/mgmt/ec_host_cmd.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move emul.h out of the top level include/ dir into
include/drivers/emul.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add Radio interface to perform back-to-back transmit of PDU
with a configurable inter frame spacing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nRF53 implementation of sw_switch always requires Radio End
event, hence optimize out redundant code due to explicit use
of radio_tmr_end_capture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor indentation change and replaced if-then-else-if clause
with toggle implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The binding-template.yaml file has grown organically into something
that's out of control.
It makes too many 'see above' and 'see below' references to be read
comfortably, and we can't cross reference from YAML.
There are also many example DTS and YAML fragments scattered about in
comments, which cannot be syntax highlighted properly.
Fix that by overhauling the documentation into bindings.rst in the DT
guide. This will let us link to individual sections when answering
questions, allows us to cross-reference and use '.. code-block::',
etc.
A couple of things need to go to other pages.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Break it down in a table based on each supported type in the bindings
language and add cross-references.
Move the section higher up, to make it easier to find.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Improve the existing documentation by showing explicitly how to access
all of the properties in the example /zephyr,user node. This makes
use of the new DT_FOREACH_PROP_ELEM() macro in particular.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It can be convenient to "iterate" over the elements of a property, in
the same way it is convenient to "iterate" over enabled instances.
Add a new macro for doing this, along with a DT_INST_FOREACH_PROP_ELEM
variant.
This is likely to be more convenient than UTIL_LISTIFY or FOR_EACH in
some situations because:
- it handles inputs of any length
- compiler error messages will be shorter and more self-contained
- it is easier to use with phandle-array type properties, which
require more complicated macro boilerplate when used with
util_macro.h APIs
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We already have support for handling the Zephyr binding "path" type in
edtlib.Node._prop_val(), but the binding inference code isn't making
use of that. Handle this type as well, as it is just as convenient as
Type.PHANDLE and can be more idiomatic depending on the situation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Instead of hard-coding constants, use an IntEnum.
These is still a subclass of 'int', but is both easier to import and
easier to read during debugging.
For example, compare:
>>> Type.BYTES
<Type.BYTES: 1>
with:
>>> TYPE_BYTES
1
However, 'Type.BYTES == 1' is still True, and the enum values
otherwise behave like you would expect.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When shell had too many pending log messages it was attempting to
drop expired messages and retrying to put the new message. There
was an assumption that enough messages are dropped and new message
can be put. It may not be the case if no message expired during
given time. Wrapped the operation in loop to continue until expired
message is freed and new message is enqueued.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With LLVM and native_posix, this is not defined and is not available in
limits.h. Workaround the issue for now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Z_CBPRINTF_ARG_SIZE macro is called for each argument in
logging macros. If argument is a string literal an intention
of this macro is to return size of a pointer. Suppressing
warning which appears in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add abstraction for llvm to allow for toolchain customizations that are
different from the gcc defaults.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This library is coded with standard POSIX names for socket functions,
so make that requirement explicit.
Also, switch it from select'ing NET_SOCKETS, to depend'ing on it. This
follows the general approach of avoiding unneeded select's in Zephyr,
which lead to conflicting dependencies and make debugging dependencies
complex overall. In this particular case, it's fair (for a user) to
expect that "simple network time protocol" requires networking API,
namely sockets, and have that explicitly on in their app configuration,
giving better overview of their app config overall.
Fixes: #34165
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Adds name length checks. The OTS spec does not
explicitely specifiy a maximum name length, but the
maximum name length in the directory listing object
shall be less or equal to 120 octets.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds additional length checks for the OTS directory listing
implementation. This will check the object name length and
the total length of the object when encoding,
as well as the length of the objects when removing objects
from the directory listing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
1. add a seperate 2 cores SMP board configuration to run in Jailhouse
inmate Cell, root Cell Linux will use Core0 and Core1, Zephyr will
run on Core2 and Core3.
2. Refine the code of dts, move SoC common dts nodes into dtsi fiel in
dts/arm64/nxp/ directory.
3. Add myself to be code owner of directory dts/arm64/nxp/.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Enabling pwm on timer3 for stm32l1 series in dtsi.
Adding other timer nodes for pwm capability.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Add support for u-blox EVK-ANNA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Addressed review comments, including SW2
Rebased to pick up new board in test_adc.c - corrected typo
Reverted to sda-pin, scl-pin
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Enable the user led and user switch that can be found
on h3ulcb, they are both connected to the GPIO 6 bank.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Renesas RCar Gen3 series have up to 8 GPIOs
bank.
Add bank 5 and bank 6, that is used to manage user led and
switches on different demo board.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Add GPIO controller driver that can be found on Renesas
RCar gen3 soc series.
Controller can handle up to 32 GPIOs per banks.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
The Compare match timer can be found on Renesas
RCar Gen3 soc series.
It depends on clock controller to supply clock to the
CMT module.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Compare Match Timer is a 32 bit compare match timer
that can be found on various Renesas R-Car SoC.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Clock Pulse Generator, Module Standby Software Reset, are registers
presents in Renesas Gen3 SoC series.
MSSR is used to supply clock to the different modules, shuch as timer,
or UART, it's also possible to issue a reset the different module.
CPG registers allow to get the rate or to set some divider like for
the CAN clock.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Adding ulcb boards documentation based on Renesas official documentation
and following zephyr guideline.
The documentation is describing the board and the current
Zephyr support.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add basic configuration for H3ULCB, just enough to see the
Zephyr boot banner on the ram console.
This configuration make use of the Cortex-R7 present on
r8a977951 SoC.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Most of the Renesas RCar Gen3 based SoC contains a Cortex R7
processor.
This processor has access to the same memory mapped devices than
the Cortex-A5x cores.
- CPU operates upto 800MHz
- Can use ram area from 0x40040000 to 0x42000000
- Has 512 interrupts on GIC-400 compliant with Arm GICv2
Add support for r8a77951 as first SoC of this series which is also
known as H3 ES2.0 and is present present on different boards such as
Salvator and R-Car Starter Kit(H3ulcb).
This first SoC definition is just enough to print Hello World in a
ram console.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
The log_backend_swo_init function sets the CYCCNTENA bit of the DWT
register to 0, disabling the counter (which is necessary for the timing
functions.
Avoid overwriting the CYCCNTENA bit.
Do not try to set read-only bits.
Fixes#34341
Signed-off-by: Andrés Manelli <am@toroid.io>
Move ctx structure from struct data to struct config, so that
it can be filled at compile time and we could get rid of the bus
init routines.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fixes a typo where the BT_GAP_PER_ADV macros had MAX twice,
as well as adding a MIN timeout macro and check.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With some additional macro-magic we can remove the CMake-based header
file template feature, and instead take advantage of the usual
DT_INST_FOREACH_STATUS_OKAY() macro.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no boards that need hard-coded interrupts so just remove this
build-time conditional branch. The way going forward is that all PCIe
devices should always use PCIE_IRQ_DETECT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add new kconfigs
Include the ns-app built by TF-M build system for regression tests
Update tfm_ipc sample to use new kconfig
Signed-off-by: Andreas Vibeto <andreas.vibeto@nordicsemi.no>
Some users reported issues on Windows regarding navigation bar title
location. Scroll values have been adjusted to fix the problem. Tested on
both Linux and Windows (Chromium/Firefox).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix ECC thread stack size which is to small to account for the worst
case scenario. When an interrupt happens at the point where the ECC
thread is at the highest stack size usage pushing the thread context
to service the ISR causes a stack overflow.
Increase the ECC thread stack size by atleast the size of the basic
stack frame of 32 bytes aligned on 8 byte for ARM architectures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
not all distributions install python3.8 libraries as a part of the
python3 package. Specifying the python3.8 library solves this problem.
Signed-off-by: Zach Hudson <zhudson@phytec.com>
By default ztest thread is running at the priority `-1`. This value is
invalid when the testcase is running in cooperative mode only. Set
default ztest thread priority to `-2` if this is the case. The fix is
modeled on the approach used to define the default
`MAIN_THREAD_PRIORITY`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add the ability to define architecture specific structures, notably
the ability to extend struct _cpu with per-CPU arch-specific stuff that
can be accessed with _current_cpu->arch.* similarly to _current->arch.*
for per-thead architecture data.
This is opt-in for architectures that want to benefit from this,
otherwise empty defaults are provided. A placeholder for ARM64 is
included to show the pattern.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We only need to distribute interrupts to CPU Cores with the count
of CONFIG_MP_NUM_CPUS, and get Core's MPID from CPU nodes in dts.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Remove files to cleanup disk space so if the machine gets
re-used we aren't wasting disk space. This can happen when different
build types (zephyr, bluetooth, and daily) all happen on the same
machine.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
junitparse doesn't deal well with being given an empty file. So build
a filterted list of non-empty files to pass to junitparser.
Additionally handle the case that all junit xml files are empty, if
that is the case skip calling junitparser and junit2html.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need 1 byte of headroom for the SPI HCI protocol.
This is not added automatically on the slave side of the SPI connection.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
So far we only have log_msg_timestamp_get() function, which returns
internal timestamp representation. This is either clock cycles or uptime
in ms, depending on main clock precision.
Introduce log_output_timestamp_to_us() helper function, which allows to
convert internal logging timestamp to us.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This adds a note about the changes made to align the error handling of
the likes of bt_l2cap_chan_send and bt_iso_chan_send.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a note about buffer ownership and error handling of
bt_iso_chan_send so it is aligned with recent changes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a note about buffer ownership and error handling of
bt_l2cap_chan_send so it is aligned with recent changes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the error handling of send function to never unref the
buffer in place so the caller retain the ownership of the buffer
whenever there is an error.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new flag, BT_LE_ADV_OPT_FORCE_NAME_IN_AD, which can be used
to force the Bluetooth GAP device name to appear in the advertising
data rather than the scan response data of an advert with scan response
data.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Fix:
arch/arm64/core/smp.c:98:3: error: 'cpu_mpid' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
get_child does not return an essentially boolean type, so it has to be
properly checked against a pointer.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Just renaming the function parameter fix two violations, one is
caused because the parameter name is different from the declaration
the other violation is because the identifier was starting with
underscore.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The virtual_iface is already NULL checked by net_if_get_by_iface()
at the beginning of the function so no need to do it here too.
Coverity-CID: 220535
Fixes#34006
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simplifying the loop in order to remove dead code (ctx_up is
always NULL after the slist loop.
Coverity-CID: 220538
Fixes#34003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to set or get the interface MTU if the interface
pointer is NULL.
Coverity-CID: 220541
Fixes#34000
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
toctree captions appear on the navigation tree. They are specially
useful if documentation is split amongst multiple toctrees.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
A new look and feel for the Zephyr documentation. It is largerly based
on the work done by Godot Engine docs, but with some Zephyr specific
customizations.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
These changes turn out to have been incompatible with the way pinctrl
drivers are going to work, so we need to go back to what we had before
until we can agree on a better approach.
Squash of the following reverts:
Revert "boards: nrf: fix deprecated I2C properties"
This reverts commit 2a4ac9ac02.
Revert "samples: switch nrf overlays to sda-gpios, scl-gpios"
This reverts commit 01bb08e7d8.
Revert "boards: nrf: switch to sda-gpios, scl-gpios"
This reverts commit 17a66304c4.
Revert "i2c: nordic: switch to phandle arrays for pinmux"
This reverts commit 821c03a14a.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some of these registers may contain nuggets of information that would be
beneficial when debugging, so include them in the fault dump.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Do not hardcode the array size in the loop for printing out the floating
point registers of the exception stack frame. The size of this array
will change when Cortex-R support is added.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Add necessary libs and files to the build
Add support for new kconfigs
Add Zephyr-only implementations of tfm_log and tfm_ns_interface.
Add zephyr_tfm_psa_test.c for easily running PSA tests.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
When CONFIG_MULTITHREADING=n kernel specific pendsv is not used. Remove
from vector table.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Fixes#34097
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This test has implemented USB HID class callbacks that
actually have no function and should not return 0.
Remove unused and wrong implemented callbacks.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This sample has implemented USB HID class callbacks that
actually have no function and should not return 0.
Remove unused and wrong implemented callbacks.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If a loaded endpoint was disabled and then reconfigured,
it is not possible to start an IN transfer and
usb_dc_ep_write() returns -EAGAIN.
Call ep_ctx_reset() to clear endpoint operations flags
and reset buffer after endpoint is disabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
No reason why we are duplicating this information in a standalone guide
when we already talk about env variables in the application developer
guide.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move cmsis OS api headers under include/portability. Those are not
libraries and only serve to provide a level of abstraction using the
CMSIS OS APIs to existing Zephyr interfaces.
Removed one level and put them directly under include/portability.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move cmsis OS apis under subsystem/portability. Those are not libraries
and only serve to provide a level of abstraction using the CMSIS OS APIs
to existing Zephyr interfaces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The GIC can return 0x3ff to indicate a spurious interrupt. Other
interrupt controllers could return something different. Check that the
pending interrupt is valid in order to avoid indexing past the end of
the isr_table.
This fixes#30465 and is based on the aarch64 fix in 9dd2731d.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
This patch introduces linker.ld file specific for ip_k66f board.
It reuses the "common" linker script for other NXP SoCs with defined
NETWORK_RAM_SECTIONS() macro for explicit placement of network
interfaces on ip_k66f board.
grep -A13 net_if_area zephyr/zephyr.map
net_if_area 0x00000000200012a0 0x820 load address 0x0000000000024ac4
0x00000000200012a0 _net_if_list_start = .
*(SORT_BY_ALIGNMENT(._net_if.static.dts*))
._net_if.static.dts_ord_51
0x00000000200012a0 0x208 zephyr/libzephyr.a(eth_mcux.c.obj)
*(SORT_BY_NAME(SORT_BY_ALIGNMENT(._net_if.static.dsa_slave*)))
._net_if.static.dsa_slave_port_DT_N_S_soc_S_spi_4002d000_S_dsa_0_S_lan_1
0x00000000200014a8 0x208 zephyr/libzephyr.a(dsa_ksz8794.c.obj)
._net_if.static.dsa_slave_port_DT_N_S_soc_S_spi_4002d000_S_dsa_0_S_lan_2
0x00000000200016b0 0x208 zephyr/libzephyr.a(dsa_ksz8794.c.obj)
._net_if.static.dsa_slave_port_DT_N_S_soc_S_spi_4002d000_S_dsa_0_S_lan_3
0x00000000200018b8 0x208 zephyr/libzephyr.a(dsa_ksz8794.c.obj)
0x0000000020001ac0 _net_if_list_end = .
As a result the eth0 (master DSA interface) is explicitly placed as the
first one (with the 'dts_ord_51' automatically assigned name) followed
by lan{123} interfaces (with 'dsa_slave_port' name assigned in
dsa_ksz8794.c).
After this patch network interfaces are explicitly placed in correct
order, so 'net_if_get_by_index()' will work correctly.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This NETWORK_RAM_SECTIONS() macro can now be overridden (in board
specific linker.ld file) when one needs to force explicit placement
of network interface' related elements.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Before this change all struct net_if objects accessed by for example
net_if_get_by_index() are placed in one linker area (i.e. net_if_area)
with the same "name" - '_net_if.static.net_if'. This may cause problems
when the order of struct net_if elements is important.
With the same names for all elements there is no guarantee of placement
order. After this change the unique device name is appended, so
SORT_BY_NAME() linker command places objects in reproductible manner.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This work is similar to one performed for ./net/ptp/clock/ test.
However, there is one notable extension - the check in iface_cb()
callback also checks for virtual interfaces defined in
subsys/net/l2/virtual/ipip/ipip.c. Those 'virtual' interfaces are
required for this test to be run.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The tests/net/ipv6/src/main.c uses net_if_get_default() to get the
interface for testing. This is problematic when board introduces its own
linker script, which places board's network interface on the "default"
position - i.e. the first one.
To fix this issue - the lookup for network device defined for this test
is used instead.
Moreover, interfaces rename has been performed in a manner, which would
allow working with 'eth_native_posix' interface being added as linker
object when drivers/ethernet/eth_native_posix.c file is linked for
./zephyr/tests/net/ipv6 test on 'native_posix' board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change is required to allow correct tests operation after changing
the definition of linker script placement rule (to be more strict and
using the device name).
The struct net_if interfaces have been renamed to preserve correct
order.
Moreover, the iface_cb() function now immediately returns for
interfaces, which are not supposed to be used in this tests - for
example ones already defined on board on which the test is run.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The struct net_if object placement in linker 'net_if_area' section
now depends on the order of ETH_NET_DEVICE_INIT() macros in the source
code (for the same object file - like app/libapp.a(main.c.obj)).
Currently the 'eth_offloading_enabled_test' device is placed first,
followed by 'eth_offloading_disabled_test'.
This placement is important when one would like to access those
interfaces with net_if_get_default() function.
After the rename the order is explicit, when we append the device name
to the ._net_if.static.<dev name> object in linker's net_if_area.
The code now works as all struct net_if interfaces are placed as
'._net_if.static.net_if' objects.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The struct net_if object placement in linker 'net_if_area' section
now depends on the order of liked libraries (like
app/libapp.a(main.c.obj). As a result interfaces defined in testing
applications are placed first in the 'net_if_area' section.
Problem arises when board has other interfaces, which are placed on the
first (i.e. default) position. In this case the test just fails as wrong
network interface is used.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The assert error message when CONFIG_KOBJECT_TEXT_AREA is
too small is confusing. Probably the original idea is for
the linker to substitue CONFIG_KOBJECT_TEXT_AREA with
the actual value. However, linker does not do that.
So change the message to say that the kconfig value needs
to be increased.
Fixes#34387
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit fixes sporadic kernel panics when writing big data chunks
to the flash. (data bus errors). Just like the stm32g4 does.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit fixes sporadic kernel panics when writing big data chunks
to the flash. (data bus errors). Just like the stm32g4 does
but on instruction cache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Wait for MAC operations to complete when transmitting. Unconfirmed
messages still open receive windows and can cause error conditions,
which are currently dropped.
It is also possible for a second send to be requested before the first
one has finished processing, which results in `LORAMAC_STATUS_BUSY`.
Empty frames (due to insufficient payload space) now also block until
the MAC layer is ready to accept new commands.
This change means the application no longer needs to guess-and-check
when it is possible to send unconfirmed messages.
Fixes#33456.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
xthal_window_spill call has to be placed into IRAM
in order to allow flash cache disabled operation, otherwise
it will crash.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
If the telnet client operates in a character mode, it may send
individual characters in packets. Such packets were dropped in the
telnet shell backend instead of being process by the shell engine.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
The SMP boot code depends on physical CPU #0 to be first to boot and
subsequent CPUs to follow suit in a linear fashion. Let's decouple
physical and logical numbering so that any physical CPU can be the
boot CPU. This is based on a prior code proposal from
Jiafei Pan <Jiafei.Pan@nxp.com>.
This, however, was about to turn the boot code into some hairy mess.
So let's clean things up and simplify the code as well while at it.
Both the extension and the clean up aren't separate commits because
they actually depend on each other.
The BOOT_PARAM_*_OFFSET defines are locally hardcoded as there is no
point exposing the related structure widely. Build time assertions
ensure they don't go out of sync with the struct definition. And
vector_table.h is repurposed into boot.h to gather boot related
definitions.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
We can find caller of z_arm64_mmu_init is on primary
core or not, so no need to check mpidr, just add a
function parameter.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Document the default behavior of LE connection parameters request when
the application has not defined a callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Extended and refactored logging documentation. Added details about
logging v2 and comparison with v1.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macro which allows to print formatted string using
logging infrastructure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added implementation of log_msg2 which is creating log messages
using cbprintf packaging and storing them in circular ring buffer
(mpsg_pbuf).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v2 is using _Generic keyword for detecting type of
log message arguments. Apparently, it does not support handling
of pointers to forward declared structures. Added casting to void *.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v2 is using _Generic keyword for detecting type of
log message arguments. Apparently, it does not support handling
of pointers to forward declared structures. Added casting to void *.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added optional debug prints. Logging cannot be used because
mpsc pbuf is used by the logging.
Added option to clear packet memory after allocation. Option is
enabled in Kconfig.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added module for storing variable length packets in a ring buffer.
Implementation assumes multiple producing contexts and single consumer.
API provides zero copy functionality with alloc, commit, claim, free
scheme.
Additionally, there are functions optimized for storing single word
packets and packets consisting of a word and a pointer. Buffer can work
in two modes: saturation or overwriting the oldest packets when buffer
has no space to allocate for a new buffer.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix a missing encryption procedure state check which allowed
out of order receive of START_ENC_RSP PDU, which made the
controller to believe its already in an encryption procedure
in progress state.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not make the first object added to the object transfer server the
current (=selected object). This leads to the server having no
current object until one is selected by the client.
This solves a startup issue where the selected callback is not called
by the server if the first object selected by the client happens to be
the same object as the object that was first added to the server. In
that case, the user of the OTS does not know which object is selected,
and therefore may not be able to supply the correct data later.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Today, there is a build target is added for each runner: flash, debug,
debugserver, attach.
And those runners will have a dependency to Zephyr logical target that
is built before invoking `west <runner>`.
This design has some flaws, mainly that additional dependencies directly
on the target will not be built when running `west <runner>` directly.
That generator expressions cannot be used for the DEPENDS argument.
Instead, the build target `<runner>` will not have any dependencies, and
will raise a build error if a dependency is added to the target.
Due to how `add_dependencies()` work, this must be done as a build time
check, and not configure time check.
`west <runner>` will invoke a build before executing the runner, and
this way ensure the build target is up-to-date, which again removes the
need for a dedicated `west_<runner>_target`.
It also minimizes the risk of developer errors, as developers no longer
need to consider the need for adding additional dependencies.
If a custom target is part of the default `all` build, then it's ensured
to be up-to-date.
Fixes: Issue reported on slack.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
In mm_swiftio hardware design, NVCC_SD0 of rt1052 is directly connected
to 3.3V, without using VSELECT control, so 1.8V support needs to be
disabled by no-1-8-v of devicetree.
Signed-off-by: Frank Li <lgl88911@163.com>
When 1.8V is disabled, sdhc can only
communicate at low speed. But this can
save the external circuit for switching
between 3.3V and 1.8V, which is very
practical in costdown scenarios.
Signed-off-by: Frank Li <lgl88911@163.com>
There's a typedef for non-pointer values compatible with atomic
non-pointer objects. Add a similar typedef for pointer values, and
the corresponding macro for initializing atomic pointer types.
This also will simplify replacing the Zephyr atomic API with one
based on C11 atomics, should that be desirable. C11 atomic pointer
values are not void*.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Normally main.c file doesn't have a header, beacuse it doesn't need to
be declared to other modules.
And in this sample it makes more sense to use name msgdev.h instead of
main.h as the header file for msgdev.c.
Signed-off-by: Paul He <pawpawhe@gmail.com>
Avoid using sizeof to access ULL and LLL struct members.
Based on the alignment requirements of structures, due to
padding between structure members, use of sizeof of previous
struct member to access next struct member is incorrect.
Continue to use explicitly stored parent pointer to access
ULL context. Combine event header and ULL header so that
the parent pointer point directly to the combined ULL
struct.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing initialization of reference count in
ull_hdr_init function.
This has not caused issues so far, but when the ref member
of the struct ull_hdr if placed in the beginning of a
context that is allocated using mem_acquire function then
first few bytes used would make the ref member to have
uninitialized value when such context is allocated by
mem_acquire. First few bytes are the next pointer and free
count stored by the mem module.
The issue was discovered in subsequent commits that
restructure the ULL context structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the auxiliary scan context release to be performed in
the disabled_cb callback after the ULL reference count is
decremented.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conn_cleanup to be performed in the event done. The
regression was introduced in
commit 5412f61ac6 ("Bluetooth: controller: Introduce
separate done memq").
Now that done event is handled asynchronously outside the
handling of the terminate node rx type, it is necessary that
terminate node rx type is generated after the done event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Consolidate Kconfigs for ISO roles to make compilation guards more
concise. Just introduces aliases, does not change functionality.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add support for u-blox EVK-NINA-B3 which uses the nRF52840.
This board is similar to the nRF52840dk_nrf52840 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected permissions
Addressed review comments
Removed arduino_spi
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
This patch is fixing three related problems:
1. When calling a syscall the marshalling function is using the ssf
parameter as value to be saved in _current->syscall_frame to mark the
beginning and the end of the syscall. This ssf value is not currently
being explictly set and instead the syscall code is using whatever
value is stored in x6 when the syscall is called. If it happens that
x6 is 0 at the time the syscall is called, this causes the
z_is_in_user_syscall() function to fail. Fix this passing the ESF as
value for ssf.
2. Given that in the ssf is now present the ESF, we can fix
arch_syscall_oops() using the ESF to print a more detailed error
message with registers dump.
3. When a wrong syscall number is used, handler_bad_syscall() is called.
This function expects the ID number as first parameter to print the
error message, fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
With the previous logic memory footprint can only be saved in a report
if a given test/sample was fully executed and passed (built and run),
hence build-only tests were not providing these metrics. This commit
modifies the logic so that it is enough to have the build successful
to be able to get the memory footprint.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The info of rom/ram usage by an application was lost along the
way of data processing in twister. The commit add a line which
pass further these metrices as well.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Some targets require *strip* command. This command was not
being set when selecting llvm toolchain.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The sample uses generate_inc_file_for_target for some "webpages" that
get included. However, the directory that the generated files are
put into: ${ZEPHYR_BINARY_DIR}/include/generated/web_page isn't
created and thus the build fails.
Add a simple 'file(MAKE_DIRECTORY ..)' to create the dir.
Fixes#34345
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the ability to use a message queue as a
k_poll object. It follows the same pattern as polling on
FIFOs.
This change has been proven in practice at Samsara.
Fixes: #26728
Signed-off-by: Nick Graves <nicholas.graves@samsara.com>
Enabling PWM on timer1 for STM32F2 platform in dtsi.
Adding other timers nodes for PWM capability.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
With the addition of #34185, it is not longer gauranteed that for a
memory region `NAME` there exists a symbol `NAME_ADDR`. Use the linker
builtin function `ORIGIN` to instead directly get the start address of
the selected memory region.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The previous implementation assumed that the dst pointer was always
aligned to a 4-byte boundary in platforms that require alignment for
storage of 32-bit integers. Since this is required for certain platforms
(eg. Arm Cortex-M0), use memcpy() instead, which always takes
alignment into account.
Fixes#33969.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Moves the beacon_enabled check in the beacon work handler to check the
beacon flag before sending anything, in case a cancel call fails.
Split out from #33782.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Ignore peer keypress notifications as a responder, allowing the pairing
procedure to continue instead of being aborted.
The Bluetooth LE specification does not specify a behavior, the
implementation has the choice of ignoring or aborting.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The Transport layer implements some checks surrounding the
lpn_msg_received call, with an accompanying comment that explains the
logic. Move this inside the msg_received call instead.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to the new delayed work API. Puts the scheduling for the next
poll in the response_received function instead of cancelling it, then
optionally scheduling it again later.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This change adds field to L2CAP connect command allowing to choose
ECFC in L2CAP connect() function and adds required logic to perform
such connection.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Made the LwM2M engine checks for pmin and pmax optional to adhere to
the LwM2M specificattion. We now first check that pmin and pmax are
actually set. Also changed the default CONFIG values for the attributes
pmin and pmax to 0 to indicate that they are not active by default.
Fixes#34329.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Changes lpn_timeout_get behavior in the config server to report the
configured LPN timeout, instead of the currently remaining timeout time.
According to the Bluetooth Mesh Profile specification, section 4.2.21,
the PollTimeout list is a list of the PollTimeout timer values, and
according to table 4.32 in this section, values 1-9 are prohibited.
Although this is not explicitly stated, this indicates that the
PollTimeout value is the configured poll timeout time - not the time
remaining until the timeout value expires. This patch changes the
implementation to reflect this.
Split out from #33782.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Removing CONFIG_TRACING_CPU_STATS in favor of
CONFIG_THREAD_RUNTIME_STATS which provides per thread stats. The same
functionality is also available when Thread analyzer is enabled with the
runtime stats enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Upon discovery of a sample/testcase.yaml file, twister will disregard
further subfolders. Given the folder structure below, the testcase.yaml
will currently not be discovered:
samples/sample1/
samples/sample1/sample.yaml
samples/sample1/tests/
samples/sample1/tests/testcase.yaml
This is desirable to allow placing test code closer to sample code.
Signed-off-by: Jorgen Kvalvaag <jorgen.kvalvaag@nordicsemi.no>
Add nucleo_l552ze_q_ns boards to the list of platforms
that can build and run the psa_level1 tf-m integration
sample. We add a dts overlay as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to force TFM Isolation Level 2 for the
STM32 board that can build with TM-M. We remove the
respective Kconfig setting. We also remove the Kconfig
overlay for STM32L562 board in the psa_level1 sample,
which was used for forcing Isolation Level 1; this is
not needed any more.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Do not allow the TFM_ISOLATION_LEVEL to be non-hidden option,
if the TFM_IPC (PSA_API) option is not set, since, in that case,
only Isolation Level 1 is supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some SPI NOR devices, particularly Atmel and SST, power-up with block
protect bits set in the status register. These bits must be cleared
before any erase or program operation can succeed. However, blindly
clearing bits in SR is wrong as some of these are non-volatile and
control chip behavior, including quad-enable.
Add a devicetree flag to identify device-specific BP bits in the status
register that should be cleared on startup only for devices that need
them, and when set do the clear during initialization.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add the standard note to two functions that require the caller to have
first acquired the device.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reads would wait until the device was ready before issuing the first
command; writes and erases did not. Fix this documenting and changing
so that wait-for-ready is invoked only where needed, i.e. to confirm
that a WRITE_STATUS, ERASE, or PROGRAM operation has completed before
proceeding to allow more commands to be submitted. This matches Linux
spi_nor driver behavior.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Make this driver multi-instance and use the new API.
This commit makes use of the new helpers introduced in #30536.
In particular:
- get bus devices with DEVICE_DT_GET
- get SPI information with SPI_CONFIG_DT_INST
- get drdy gpios with GPIO_DT_SPEC_GET
Signed-off-by: Armando Visconti <armando.visconti@st.com>
When compiler results are piped through a non-terminal (e.g. ninja)
the compiler disables colour diagnostics. Using `-fdiagnostics-color`
forces the compiler to enable colour output. This flag is set for
clang and gcc when `ZEPHYR_BUILD_COLOUR_DIAGNOSTIC` environment
variable is set when a clean build is started.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Add nrf52840dk_nrf52840 as integration platform since
there is already devicetree overlay for that.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not explicitly enable fixed regulator driver for boards and tests
because it is automatically selected when corresponding node
is defined.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add regulator compatibility string to Kconfig.fixed file
and allow fixed regulator driver to be enabled when compatible
node is defined. However, remove this option from common Kconfig
as it is legitimate to enable/disable regulator support.
Change menuconfig REGULATOR_FIXED to config since this
menu nesting is not necessary.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This feature prevents issues when trying to write data to the flash
device that is located on or addressed at the same flash device.
An example is the mcuboot logic that writes a magic number to
the secondary partition header.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This fixes a bug in the write function of the MCUX FlexSPI flash driver
if the length of the data is larger than a single page.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The bootloader application itself should contain the IVT/DCD
in the header, but the chainable application doesn't.
The ROM_START_OFFSET defaults to 0x400 otherwise the linker
alignment isn't taken into account.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This change allows writing to the flash while running in XIP mode,
and enables mcuboot or NVS settings to be used on i.MX RT socs.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Check that the index returned by the function that looks
for an available IRQ line is non-negative, and do not just
rely on catching this with an ASSERT. That suppresses a
Coverity out-of-bounds warning.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Transport layer would previously rely on the access layer to check
whether there's room for the full message and a MIC in the available
buffer space, and its own checks would ignore the MIC. This should be
handled by the Transport layer checks, so the access layer doesn't have
to.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Periodic publication would previously build and send the first
publication inside the bt_mesh_model_pub() function, before cancelling
and rescheduling the next publication. The timer handler would only
handle retransmissions, and would abandon the rest of the publication
event if one of the packets failed to send.
This design has three issues:
- If the initial timer cancel fails, the publication would interfer with
the periodic publication management, which might skip an event or
send too many packets.
- If any of the messages fail to publish, the full publication event
would be abandoned. This is not predictable or expected from the API.
- bt_mesh_model_pub() required 384 bytes of stack to build the message,
which has to be factored into all calling threads.
This patch moves all transmission into the publication timer by
replacing k_work_cancel with a single k_work_reschedule(K_NO_WAIT). It
also changes the error recovery behavior to attempt to finish the full
publication event even if some of the transmissions fail.
Split out from #33782.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
We had one extra level in the docs, reduce and show modbus details
directly instead of the extra step.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move out of misc/ and put in own folder and add the grouping to doxygen
to be able to reference the doxygen docs into RST.
Move each item into their own file to reduce clutter and to make it
less crowded in one single page.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Fixes#34092
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Minor updates to the documentation of the nRF9160 DK
board, stressing that TF-M is the default Secure
firmware binary for non-secure nRF9160 builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the default Secure SRAM partition size for nRF9160,
so it aligns with the default TF-M secure partition size.
Also, change the DeviceTree node name from "bsd" to "modem",
to align with how the respective library component is named.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
By default, when building for the non-secure version of the
board, use TF-M as the secure firmware binary.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Several driver libraries uses:
```
zephyr_sources_ifdef()
```
instead of
```
zephyr_library()
zephyr_library_sources_ifdef()
```
This results in a messy Zephyr lib as described in: #8825
One reason for drivers to use the first approach is because an empty
Zephyr library results in a CMake build failure which again leads to
twister issues when just enabling a driver and build for all known
boards and then process the DTS result.
Secondly, a CMake build failure prevents the user from launching
menuconfig and disable the driver that creates the empty library.
See #9573 for extra details.
This commit verifies all Zephyr libraries, and if a library is found to
have no source files it will be excluded from the build and a warning
will be printed to the user.
Printing a warning instead of a hard failure ensures that:
- menuconfig can still be opened
- CMake does not fail which allows twister to advance in the test case
- Makes it possible to cleanup CMakeLists driver files
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The change is done to avoid redefinition errors while attempting
to enable flash_simulator with stm32 platform (stm32f4_disco)
which exports its own definition of FLASH macro, from stm32f407xx.h.
Unfortunately the stm32 definition is visible within flash_simulator
via inclusion of device.h.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The vtable cannot point to address 1 as that is clearly not a
valid address and will fail when the code tries to access it
in various fdtable.c functions. Point the vtable in tests either
to NULL or to a valid vtable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
3rd parameter (struct k_mutex *) was added to
z_get_fd_obj_and_vtable() so add it to calls in the tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The fdtable infrastructure provides a possibility to prevent
concurrent access to file descriptor. Use that functionality
in eventfd API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After changes in commit a42d6c98d3, the
pkt can no longer be a NULL pointer. Remove the unnecessary NULL pointer
check to silence the Coverity.
Coverity ID: 219536
Fixes#32912
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sample showed the error between the two clocks, but did not show
how to use the skew to reconstruct one clock from the other and the
resulting error.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
It doesn't hurt always having the image header and generating the binary
output. I find myself constantly setting those to 'y', so make it
definitive.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Thi GICv3 driver is configuring the controller accessing the system
registers ICC_*. To be able to do that without trapping we have to
explicitly set at boot in EL3 the value of the ICC_SRE_EL3 register that
is architecturally set to UNKNOWN value on warm reset.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Define the FLASH_CCFG memory region from a devicetree partition instead
of from math in the linker file. Removing the special math case results
in the FLASH_CCFG region overlapping the FLASH region, but the linker
accepts this until the FLASH region actually starts placing variables
in the FLASH_CCFG region.
As a result, applications that don't fit in (FLASH_SIZE - 88) bytes will
still fail to link, just with an overlapping memory region error instead
of an overflow error.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the definition of the two IPC RAM blocks from `#define`'s in family
linker scripts to proper devicetree nodes. Use the devicetree nodes to
generate the memory regions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Simplify the linker script by using the helper macros introduced in
<linker/devicetree_regions.h>. The conditional checks on the Kconfig
symbols are discarded as their default values are typically set via
the status="okay" property of the nodes, and hence the behaviour doesn't
change.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds a public macro for creating memory regions from devicetree nodes.
`DT_REGION_FROM_NODE_STATUS_OKAY` declares the memory regions for
consumption by ld, assuming the node exists and has `status = "okay"`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
- added an option to use GPIO to enable USB DFU.
Patch required as wait_for_usb_dfu() function started to
take time argument since was #30015 merged.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Remove board code and a few associated samples/tests that explicitly
call pinmux_pin_set() to set a given pin as GPIO. This is handled as
part of gpio_mcux_configure() so we don't need to do it again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set the PCR[MUX] field to kPORT_MuxAsGpio as part of configuring a GPIO
pin. This removes the need to explicitly call pinmux_pin_set() in board
code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If `CONFIG_NET_ICMPV4_ACCEPT_BROADCAST` is enabled ICMPv4 should reply
to request packets sent to the broadcast address of an interface with
the unicast address of that interface from the same subnet.
Previously the code blindly copied the ICMP source address which meant
it would reply to broadcast packets with a broadcast source address.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Support setting MAC address manually at runtime for Atmel SAM Ethernet
driver. The MAC address can be set using an ethernet management
request, e.g. (`net_mgmt(NET_REQUEST_ETHERNET_SET_MAC_ADDRESS, ...)`).
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This function always returns the same value for a given thread.
Add the const attribute to it so the compiler won't call it over and
over needlessly each time _current is referenced, making for far more
efficient code.
The __attribute_const__ symbol is used to mimic the Linux equivalent.
We want to make it clear that this is distinct from the const keyword.
Fix the test_x86_cpu_scrubs_regs where the compiler wasn't told that a
bunch of registers are being clobbered as highlighted by this change.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
A bug was introduced when encoding/decoding moved to separate
functions where sizeof no longer had the correct argument.
The size of the encode buffer is passed to the encode function.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The `init_string` array could have been used uninitialized, fix this
by initializing it as an empty string, which is a desired content in
case it's not overwritten.
CID: 220302
Fixes#33839
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently the SRAM location is fixed for all the boards derived from
qemu_cortex_a53. While this is acceptable when the image is directly
loaded in SRAM by QEMU, in some cases Zephyr can be loaded in RAM by
another piece of software or by semihosting at a different address
before jumping into it.
When for example TF-A is used and Zephyr is run as BL33 payload using
QEMU, in this case the default location in RAM is at a different
address (when preloaded BL33 base address is not used).
To address these cases, move the SRAM location into the board-specific
DTS so that it can be adjusted on a board by board basis.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Let's fully exploit tpidrro_el0 by storing in it the current CPU's
struct _cpu instance alongside the userspace mode flag bit. This
greatly simplifies the code needed to get at the cpu structure, and
this paves the way to much simpler multi cluster support, as there
is no longer the need to decode MPIDR all the time.
The same code is used in the !SMP case as there are benefits there too
such as avoiding the literal pool, and it looks cleaner.
The tpidrro_el0 value is no longer stored in the exception stack frame.
Instead, we simply restore the user mode flag based on the SPSR value.
This way, more flag bits could be used independently in the future.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This avoids contention between unrelated slabs and allows for
userspace accessible slabs when located in memory partitions.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The commit coccinelle/coccinelle@47bd4cae52 changed a behavior of
parsing right before coccinelle v1.1.0. With the commit, the current
scripts under scripts/coccinelle/ errors out with:
minus: parse error:
File ".../zephyr/scripts/coccinelle/deref_null.cocci",
line 25, column 42, charpos = 666
around = '...',
whole content = (E != NULL && ...) ? <+...E->f@p1...+> : ...
I've already raised an issue upstream coccinelle/coccinelle#257. But
Debian is already shipping v1.1.0 and we need a fix.
The proposed fix doesn't change the semantics, it just explicitly
states that the rule is an expression.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
The structure is now k_work_delayable.
The init function is now k_work_init_delayable.
The submit function is now the k_work_reschedule.
The cancel function is now the k_work_cancel_delayable.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the missing parts for adding support
to stm32h7 dma driver.
The fix is to make dmamux driver work with
dma v1 driver.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Add support for u-blox BMD-360-EVAL which uses the nRF52811.
This board is functionally equivalent to the nRF52dk with a
nRF52811 mounted in place of the nRF52832 with the exception
of not having debug-in and the shield SWD header.
DEVELOP_IN_NRF52832 is *not* required since the IC
used is the nRF52811.
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52811.
Tested with blinky, button, and Bluetooth peripheral_hr
Edited to include changes similar to those requested in
https://github.com/zephyrproject-rtos/zephyr/pull/33850
(nRF52810 there vs. nRF52811 here)
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
First design towards ISO adaptation layer, this PR introduces
data-structures and framework for Rx unframed PDUs (BT RX ingress).
Two callbacks are defined for the SDU production (BT RX egress), one for
SDU allocation as well as a callback for emitting a reassembled SDU.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
If we have CONFIG_NET_SOCKETS_POSIX_NAMES enabled (which is now
default), and also have CONFIG_NEWLIB_LIBC enabled, latest versions
of GCC throw a strange error like:
error: conflicting types for 'zsock_fcntl'
692 | #define fcntl zsock_fcntl
After enough consideration, it seems that when Newlib is used, its
fcntl.h header is used, which declares fcntl() with POSIX prototype:
"int fcntl(int fd, int cmd, ...)". It seems that recent GCC, when
seeing the #define like above, checks that its right-hand side
(zsock_fcntl(int, int, int) above) is compatible with an existing
LHS prototype. That doesn't make sense from the point of view of
the C preprocessor semantics, and yet that's what apparently happens.
Make GCC happy by defining an inline wrapper function with
signature compatible with POSIX fcntl prototype, and use it in
the define, instead of zsock_fcntl directly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add numeric http status code to the response struct to allow for
easier processing by the caller. Textual status already exists.
Signed-off-by: Justin Morton <justin.morton@nordicsemi.no>
This commit puts the radio in sleep mode when the diagnostics are
stopped.
This fixes an assert on MAC code when `ot diag stop` command is
issued while `ot diag send` is still ongoing.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add pinctrl-0 properties for configuration of peripherals like UART,
I2C, ADC, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UART,
I2C, ADC, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like LPUART,
SPI, I2C, ADC, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UARTs,
SPI, ENET, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UARTs,
I2C, SPI, FTMs, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UARTs,
I2C, SPI, FTMs, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UARTs,
I2C, SPI, FTMs, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UARTs,
I2C, SPI, FTMs, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add pinctrl-0 properties for configuration of peripherals like UART,
ADC, etc. These settings are based on what is defined in
the board/pinmux.c file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The final else was missing in the if ... else if ... construct.
This commit adds a non-empty else {} to comply with coding
guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The if ... else if ... construct was missing the final else.
This commit refactors it to comply with coding guideline 15.7.
The logic is to check if used or free, and do not increment
for the reserved chunks (first/last) in the heap.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The parameter can be used to limit the ram and rom reports to a
certain depth. The resulting graphs with depths of e.g. 3 or 4 are
visually easier to grasp.
Signed-off-by: Detlev Zundel <dzu@member.fsf.org>
The script already accepts a depth parameter to configure the output,
but that parameter was not used at all. This commit adds the correct
handling by passing it to anytrees RenderTree iterator.
Signed-off-by: Detlev Zundel <dzu@member.fsf.org>
The TPM1/2 pin settings aren't used by any drivers or other devices and
only existed for testing purposes. Remove them since nothing in tree
is utilizing these settings.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The nodelabel for the PWM controller on KW41Z is TPM[0..n], so we need
to change the logic in the ifdef to get the pins setup.
Additionally the setup of PORTA0/1 and PORTB16/17 pins for TPM only
exists on kPORT_MuxAlt5.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There's no obvious reason that PTC11 should be as a GPIO pin when SPI0
is being utilized. As such remove this pin setting.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The chipselect is wired to PTC4 and is SPI0_PCS0. Fix pinmux.c and
board docs to correctly reflect this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update eSPI buffer to values required per eSPI specification.
Allow applications to override as needed.
Guarantee buffers are not allocated at all if channels are
disabled.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
chan_send does restore buffer state in case of an error which is
different than how bt_l2cap_send_cb works as it does always unref in
case of an error.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes a regression introduced by
10841b9a14 as it did remove a call to
net_buf_ref which was used not only to keep a reference for resending
but also to prevent bt_l2cap_send_cb to unref the buffer in case it
fails.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The log_core tests assume the logger is configured in
LOG_MODE_DEFERRED, so let's set it explicitly in the test
prj.conf instead of relaying on defaults.
+ fix a typo in test
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add parenthesis for the parameters to avoid the issues if
parameter is an expression but not an immediate value.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Move the internal structs used by the generic, shared interrupt driver
from the public header file into the implementation file.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In the time between a NODE_RX_TYPE_CONNECTION node is sent from LLL and
demuxed in ULL, an ADV role disable may be executed.
This makes the LLL data referenced in the node NULL/invald, and
ull_conn_setup would operate on invalid data.
This commit introduces a check in ADV disable to disallow the operation
(including conn invalidation), if a connection has been initiated.
To prevent pipeline-queued prepares from advertising after disable has
been initiated, set 'cancelled' flag for immediate signalling to LLL.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add an entry in the release notes for 2.6, indicating
that TF-M is updated to v1.3.0 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Zephyr socket subsystem has come a long way since initial experimental
alternative to internal Zephyr networking API. Its configuration also
mirrors the usual conservative approach, where a user needs to
explicitly enable options to get "more" features. And as an
experimental API, socket subsystem was initially developed as
namespaced API, where all functions/structures are prefixed with
"zsock_", and to get standard names, CONFIG_NET_SOCKETS_POSIX_NAMES
needs to be set (or alternatively, CONFIG_POSIX_API needs to be, which
enabled full POSIX subsys overall).
However, a few years later, sockets are the standard networking API,
and in majority of cases its used under the standard POSIX names.
Necessity to explicitly set an option to achieve this effects, and
confusion which results from it - are just unneeded chores for users.
So, switch CONFIG_NET_SOCKETS_POSIX_NAMES to be on by default (unless
CONFIG_POSIX_API is already defined). It still can be explicitly
disabled if needed (but usecases for that would be peculiar and rare).
Addresses #34165
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixed the name of nodes in in espi-vw, miwu-wui, and miwu-int
device-tree node. This CL fixed missing nodes in CL d3a94fa8ab.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The following is the interrupt priority plan for ec application.
The original IRQ priority map in Chromium EC is:
- IRQ priority 0:
|-ITIM IRQ for Warning watchdog.
-IRQ priority 1:
|-UART IRQ for signle byte FIFO in npcx5 series.
(Ignore it since UART has 16 bytes FIFO in npcx7 and later series.)
-IRQ priority 2:
|-SHI IRQ for FIFO FULL and Half FULL event.
|-MIWU IRQ for SHI CS. (Wake-Up ASAP for handling data from SPI bus.)
-IRQ priority 3:
|-All MIWU IRQs for GPIO, MTC and eSPI VW events.
|-ITIM IRQ for task scheduling.
|-ITIM IRQ for time-out.
(No need in Zephyr since 64-bit timer support.)
IRQ priority 4:
|-All UART FIFO IRQs
|-All I2C controller IRQs
|-ADC IRQ for conversion event.
|-ESPI IRQ for generic eSPI bus events.
|-Host KBC IBF/OBE IRQs
|-Host PM IBF/OBE IRQs
|-Host port80 IRQ
|-PECI IRQ
IRQ priority 5:
|-Keyboard RAW IRQ
|-PS2 IRQ
Then, this CL arranges the priority of npcx interrupts in Zephyr as:
IRQ priority 0:
|-Reserved it for further requirements.
IRQ priority 1:
|-SHI IRQ for FIFO FULL and Half FULL event.
| (Will modify it in ec repo.)
|-MIWU IRQ for SHI CS (Will modify it in ec repo.)
IRQ priority 2:
|-MIWU IRQ for GPIO, MTC, T0 timer and eSPI VW events.
|-ITIM IRQ for task scheduling.
IRQ priority 3:
|-All UART FIFO IRQs
|-All I2C controller IRQs
|-ADC IRQ for conversion event.
|-ESPI IRQ for generic eSPI bus events.
|-Host KBC IBF/OBE IRQs
|-Host PM IBF/OBE IRQs
|-Host port80 IRQ
IRQ priority 4:
|-Keyboard RAW IRQ. (Will modify it in ec repo.)
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
For i2c-devices, reg is the address. This took me way to long to
discover and I wanted to leave a breadcrumb for the next Zephyr newbie.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
The functionality of the MPU depends on userspace, which has not
been implemented on AArch64. Therefore we skip that case for now.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Add essential files to create a new board. Enable arch timer, uart,
multi-threading. Set memory map for flash and sram. The new board name
is fvp_baser_aemv8r with the fvp_aemv8r_aarch64 soc.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
This commit fixes the build error: "error implementation of
timestamp_serialize() not provided for your CPU target" for
fvp_baser_aemv8r tests.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
When ARM_MPU is defined, the MPU drivers will be built into the final
zephyr target.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add several default mpu regions(flash/sram/sram_text/sram_ro) for
the Armv8-R aarch64 based Soc.
These regions will be initialized as static region during system boot.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
When MPU is enabled, the sections need to be 64 bytes aligned.
In the case of MMU, BSS section will be 4k aligned, because the first
variable in BSS section 'base_xlat_table' is explicitly aligned by
'__aligned(NUM_BASE_LEVEL_ENTRIES * sizeof(uint64_t))'.
However, with MPU, we do not have such a variable. So it's necessary
to fix the alignment of the BSS section in the linker.ld
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Armv8-R AArch64 MPU can support a maximum 16 memory regions, and the
actual region number can be retrieved from the system register(MPUIR)
during MPU initialization.
Current MPU driver only suppots EL1.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
According to Armv8-R64 Spec, MPU related meta data(region base/limit)
is 64 bits. So we need to re-define MPU related data structure here.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Use -march=armv8.4-a to compile zephyr on cortex-R82.
Because Cortex-R82 has not been enabled in GCC 10.x currently.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add arm fvp emulator in order to use ninja run or west build -t run.
Add armfvp in order to run twister.
Set env ARMFVP_BIN_PATH before using it,
e.g. export ARMFVP_BIN_PATH=<path/to/fvp/dir>
NOTE: ARMFVP_BIN_PATH is the dir path.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add essential files to create a new soc.
Introduce a new type of soc series named fvp_aemv8r.
Add a new soc named fvp_aemv8r_aarch64.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add Cortex-R82 config to support the Cortex-R82 processor.
Introduce the new CPU_CORTEX_R_AARCH64 config for the Cortex-R 64-bit
processor.
Since the current CPU_CORTEX_R config has already been bound for
AArch32 in many test cases, we therefore add a new CPU_AARCH64_CORTEX_R
to distinguish from the Cortex-R 32-bit processor.
We do not use CPU_CORTEX_R64 because this name will lead to ambiguity
with processor name like Cortex-R82.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
If default config ARM_MMU is set to n, samples/tests will have
compilation error. This is because the arch/arm/aarch64/arm_mmu.h
is always included.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
When printing the unassigned values the 'sym' variable is
used as a dict from which we try to get the 'name' value.
However, 'symbols['unassigned']' gives a list of keys, so
we get an 'TypeError' when trying to access ['name'] of
a string (the key).
Fix this issue by iterating over the values from
the 'symbols['unassigned']' dict instead.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
As of today we use second register bank only if fast interrupts are
enabled. So don't show the 'number of register bank' configuration
option if fast interrupts are disabled to avoid user confusion.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This option enables BT_TICKER_SLOT_AGNOSTIC which eliminates
priorities and collision resolving in the ticker.
Event scheduling states are stored in the lll_hdr, and event priority
is passed from LLL implementation, and runtime priority calculated.
LLL implementation decides whether to program radio, start preemption
timer, and/or queue prepare in the prepare pipeline.
Event arbitration is made possible via the common LLL, but not yet
implemented in Nordic LLL.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Priority in the legacy stack has been unused and "work in progress" for
some time. With this commit, the priority passing/handling is cleaned
up, preparing for the new JIT scheduling priority handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Split lll_prepare and lll_resume from Nordic LLL to common file for
reuse by all vendors. The split also supports new JIT Scheduling by
defining a common place to calculate event prepare priority.
The module may also house other common parts of the LLL currently
re-implemented identically by vendors.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The ticker 'force' flag is propagated via the ticker elapsed callback,
in order to provide necessary information for collision resolving in the
link layer.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added config BT_TICKER_SLOT_AGNOSTIC which configures the ticker in
a "slot agnostic" mode, in which no collision resolving or slot
reservation is possible or used. In this mode, the ticker acts as a
simple timer.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Renamed to BT_TICKER_LOW_LAT in ticker, and changed selected
conditionally compiled code to use IS_DEFINED macro.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Change the GPIO_MMIO32_INIT to take a devicetree node since we want
to use DEVICE_DT_DEFINE. This makes it so that code using
GPIO_DT_SPEC_GET works correctly with GPIO controllers that utilize
GPIO MMIO32.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added net-capture.py script to net-tools project. The script
can be used to view and save the captured network traffic to
pcap file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The typical number of needed translation tables depends on memory
domain usage and userspace support, but also on the virtual address
space width due to the number of translation levels involved.
Reflect that in the default value.
Also fix a related comment where values were off by 1.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This very first version supports the 160x128 pixels adafruit TFT display
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
First version of a driver for the st773r LCD controller.
Based on st7789v
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
I2C isn't connected on the KW40Z to anything so configuring the pins
for at and having it enabled in the devicetree don't make any sense.
Additionally, the pins for I2C are currently conflicting with the UART
pins, which is another reason to remove the I2C config.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are building the driver with CONFIG_UART_INTERRUPT_DRIVEN=n
we need to ifdef around the decleration of uart_cmsdk_apb_isr()
or we'll get a compiler warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board _defconfig file was trying to set
LOG_MODE_IMMEDIATE unconditionally by default, which
caused a warning when LOG wasn't enabled.
Instead set it only when LOG is enabled.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Modify the testcase design to solve some threads
can't lock mutex. Using array index to detect the order
of threads getting mutex instead of delaying.
Fixed#34116
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
The structure for the arm64_cpu_init array has to carry the cache
alignment on the whole structure and not on some internal padding
to achieve the desired effect.
And align struct __esf to a 16-byte boundary which will also align
its size accordingly. This structure is allocated on the stack on
exception entry and the ABI prescribed 16-byte stack alignment
should be preserved.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Replace k_work_cancel_delayable() with k_work_cancel_delayable_sync()
to make sure that the submitted work becomes idle before accessing
sensitive data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit implements the secondary service
Audio Input Control Service (AICS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
``arduino-header-r3`` was incorrectly referred to as
``arduino-r3-header``.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
STM32Cube updates:
stm32cube: update stm32l5 to version V1.4.0
stm32cube: update stm32l4 to version V1.17.0
stm32cube: update stm32g4 to version V1.4.0
stm32cube: update stm32f7 to version V1.16.1
stm32cube: update stm32f4 to version V1.26.0
stm32cube: update stm32g0 to version V1.4.1
stm32cube: update stm32h7 to version V1.9.1
stm32cube: update stm32mp1 to version V1.4.0
update stm32cube/common_ll
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds feature allowing to use yaml file with dictionaries defining
tests to be quarantined (extra arg "--quarantine-list FILENAME").
The dictionaries are validated according to the proper schema
and loaded.
A flat list is created containing quarantined configurations
(configuration = platform + scenario). Configurations under quarantine
are skipped and get "Quarantine" as a reason in the results reports.
A "comment" can be added to a quarantine entry in the quarantine yaml
with more details (e.g. issue #) and it will be also added to
the report.
The status of tests under quarantine can be verify if
`--quarantine-verify` is used in addition to
"--quarantine-list FILENAME". Using these args will make twister skip
all tests which are not on the quarantine list.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Flag was present only when ZLI was enabled. That resulted in additional
ifdefs needed whenever code supports ZLI and non-ZLI mode.
Removed ifdefs, added build assert to irq connections to fail at
compile time if IRQ_ZERO_LATENCY is set but ZLI is disabled. Additional
clean up made which resulted from removing the ifdef.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Enabling flash support for nucleo-l152re in device tree.
This has been tested with flash sample application on
nucleo-l152re platform.
Documentation has been updated.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling flash support for nucleo-g071rb in device tree.
This has been tested with flash sample application on
nucleo-g071rb platform.
Documentation has been updated.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling flash support for nucleo-f103rb in device tree.
This has been tested with flash sample application on
nucleo-f103rb platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Projects based on native_posix get a warning indicating that the
LOG_MODE_IMMEDIATE choice symbol is selected but no symbol ended up as
the choice selection.
Only set the logging mode if logging is enabled.
Signed-off-by: Keith Short <keithshort@google.com>
In CI we typically build for "default" platforms. However some
testcases that set "platform_allow" may have no overlap with the default
platforms and thus thoses testcases will not get built.
Change the platform selection logic in these cases to set the platforms
to the list of allowed platforms ("platform_allow") in the testcase.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With this patch, the UCPD1 _CC1 and _CC2 pins
are disabling the USB Type-C and Power Delivery Dead Battery.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With this patch, the UCPD1 _CC1 and _CC2 pins
are disabling the USB Type-C and Power Delivery Dead Battery.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With this patch, the UCPD1 _CC1 and _CC2 pins
are disabling the USB Type-C and Power Delivery Dead Battery.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
ESP32 requires some content as fatal.c rodata to be
placed into RAM to allow cache disabled exceptions.
The consequence is that it will trigger missing log_strdup
call when normal exception is called. Disabling that by default
fix the error and stops terminal output flooding warning event.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The source clock of the watchdog module is selected to the input of T0
timer, not output. Correct the drawing in case confusing the users.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds support for console expired mechanism. It implements the
notification to power management module that the module for console is
in use. If the interval that module doesn't receive any input message
exceeds CONFIG_SOC_POWER_CONSOLE_EXPIRED_TIMEOUT, the power management
module is allowed to enter deep sleep mode. This mechanism gives a
window in which the users can organize console input.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces two configuration options which allows a notification
to the power management module that the UART console module is in use
now. If the interval of console module doesn't receive any input message
exceeds expired timeout, the power management module is allowed to enter
sleep/deep sleep state and turn off the clock of console module.
This mechanism gives a window in which the users can organize input
message if CONFIG_PM is enabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
NPCX watchdog driver has a WDT_NPCX_DELAY_CYCLES for delay the watchdog
reset time after the watchdog timeout. For some systems, users would
like to use the watchdog timeout ISR but don't reset the chip
immediately. Let the system have the final chance to ongoing the system
before the real hardware reset time. Removing the watchdog reset
waiting loop in ISR lets users decide whether wait for watchdog reset
by themself.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
The GSG link is no longer valid. This commit fixes the link to
use the site recommended by ACRN developers.
Fixes#34149
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Add a note in the Kconfig help text that explains why Hard ABI
is not possible on builds with TF-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building with TFM, the app is linked with libraries built by the
TFM build system. TFM is always built with -msoft-float which is
equivalent to -mfloat-abi=soft. FP_HARDABI adds -mfloat-abi=hard
which gives errors when linking with the libs from TFM since they are
built with a different ABI.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/33956
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Move the LLL done event handling from ULL to LLL, this
reduces CPU utilization and reduces overhead between radio
events.
Fixes#21993.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Defer the event early abort so that lll_done does not get
recursively invoked when called inside prepare callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There is a race between the pipeline enqueue by the ULL
context when processing the LLL done event, and the
pipeline queue by the ticker timeout for a new radio
event. This caused an already enqueued event prepare to be
placed after the newly arrived request to enqueue a prepare
by ticker timeout.
Fix this race by placing the new prepare in the pipeline
instead of starting the event, when ULL is still processing
the LLL done event.
As ticker timeout and ULL processing of LLL done event are
in the same ULL_HIGH context, the pipeline handling is safe
with the order of prepares maintained correctly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We can't do atomic memory operations before the MMU is on. Let's create
a code path to set up MMU page tables without any lock. There is
obviously no concurrency issues at this stage.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add include <bluetooth/mesh/msg.h> into <bluetooth/mesh/access.h> to get
definition of 'struct bt_mesh_msg_ctx'.
We see this when trying to build the mesh_badge sample for the
reel_board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit fixes problem with nrfjprog runner for west flash,
that has been introduced with latest changes to BuildConfiguration
class.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
GIC_INTID_SPURIOUS is a GIC-specific intid so it's not valid for custom
interrupt controllers. Rework a bit the logic by comparing the intid to
the maximum intid possible instead.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
On STM32L5 based boards, rework the TFM build/flash instructions
to minimize potential confusions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Currently _curr_cpu is only used by the get_cpu macro to quickly access
the cpu struct. This is not really necessary because we can access to
the struct by directly referencing &(_kernel.cpus[cpu_num]) in assembly
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Commit d6c34c4644 changed the behavior
slightly but didn't update the documentation. The callback will now be
reset to NULL once the key is generated. Calling bt_pub_key_gen()
multiple times before the key is finished would result in creation of an
infinite loop. This could happen when an application calls mesh_init()
and mesh_reset() in quick succession. Clarify the behavior of the API in
the documentation.
Also passing a NULL argument would result in an undefined behavior, so
add a check to match the behavior described in documentation.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
NXP ls1046a is SoC includes the following functions and features:
1. Four 32/64-bit Arm v8 A72 CPUs
2. Cache coherent interconnect (CCI-400)
3. One 32/64-bit DDR4 SDRAM memory controller with ECC
4. Peripheral interfaces include DPAA network, PCIe, USB, SPI,
GPIO, UART, SDHC, IFC, LPUART ...
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
The stm32 wwdg driver was currently tested only on disco_l475_iot1.
Additionally add nucleo_f091rc, such that one board with an CM0 core is
tested. And add nucleo_g431rb, that one board is included that has
newer register mapping and a 128 prescaler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
As older series supported only 4 different prescaler values the
highest prescaler value was hardcoded. Newer series support 8
programmable prescaler values, therefore take the allowed values from
ll_wwdg header file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Series STM32G0, STM32G4, STM32H7, STM32L5, STM32WB, STM32WL have
a newer wwdg ip and store the prescaler value not in bits[8:7],
but bits bits[13:11], use the definitions from ll to account for that.
Remove IS_WWDG_PRESCALER, this is not required as the prescaler
is not calculated, but known valid prescaler values are tested until a
valid counter is found.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Cortex M0 Series only have two interrupt priority bits,
nevertheless all series set the priority per default to the invalid
value of 7.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add tests that validate the behaviour of providing NULL as a data
pointer to discard whatever data is in the ring buffer.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow NULL data buffers to be provided to `ring_buf_get` and
`ring_buf_item_get`, in which case data will be discarded instead of
copied out to the user.
Fixes#33488.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add Alexandre and François as collaborators on STM32 Platforms.
Additionally, add one naming for stm32 boards.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update the binding for how we represent pin data to support child
nodes with a nxp,kinetis-pins property that has the pin data.
For example:
UART0_CTS_PTA0: uart0_cts_pta0 {
nxp,kinetis-port-pins = < 0 2 >;
};
Also pull in pincfg-node.yaml to get various common pin flags like
"bias-pull-up", "drive-open-drain", etc.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for run time idle power mode.
Wakeup time from sleep mode varies from 1-7us
depending on the core speed.
Hence picked a min-residency-us value of 10us.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
__ASSERT() macro is used in sys/sflist.h while sys/__assert.h was not
included. Fix that now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The Kconfig symbol CONFIG_DMA_0_NAME was recently removed. Update the
dma channel link transfer test to get the device name from an
application level Kconfig instead, similar to other dma driver tests.
This fixes a CI compliance failure that checks for references to
undefined Kconfig symbols.
Tested on the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
test minor/major link mode on frdm_k64f and mimxrt1060_evk
log as below:
Running test suite dma_m2m_link_test
===================================================================
START - test_dma_m2m_chan0_1_major_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
It is harder to be kind than to be wise........
It is harder to
PASS - test_dma_m2m_chan0_1_major_link
===================================================================
START - test_dma_m2m_chan0_1_minor_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
It is harder to be kind than to be wise........
It is harder to be kind than to
PASS - test_dma_m2m_chan0_1_minor_link
===================================================================
START - test_dma_m2m_chan0_1_minor_major_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
DMA transfer done ch 1
It is harder to be kind than to be wise........
It is harder to be kind than to be wise........
PASS - test_dma_m2m_chan0_1_minor_major_link
===================================================================
Test suite dma_m2m_link_test succeeded
===================================================================
PROJECT EXECUTION SUCCESSFUL
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
1. remove redundant protection on channel status
2. update link interface to support major and minor link
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The ImgtoolSigner.sign() is passed a BuildConfiguration object instance
that holds all of Kconfig options that have been defined for a build;
yet it has been reading the .config file once again, with the
load_dot_config, to check some of these options.
The commit replaces the code that has been using the load_dot_config
obtained data with the code that uses the BuildConfiguration object.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The body of load_dot_config method has been reimplemented in
BuildConfiguration.get(), replacing the previous code.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The BuildConfiguration.path attribute has been added that stores path
to .config file which has been used as source for options collected to
BuildCOnfiguration object.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Limit adafruit_2_8_tft_touch_v2 sample variant execution to the boards
that have this shield available.
In order to run the test in CI bench, add the following in
twister map.yml file on matching board:
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
For instance:
- connected: true
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
id: 0673FF323535474B43171415
platform: nucleo_f429zi
product: STM32 STLink
runner: openocd
serial: /dev/ttyACM0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds #defines for the minimum (first) and maximum (last)
attribute handles in ATT. These are useful for when setting e.g.
the start and end handle when doing a full GATT discover.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_iso_chan_disconnected assumes a CIS, but was
also used for BIS, so whenever it was called it attempted
to get a non-existing ACL connection.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixed the name of nodes in device-tree files by following rules:
If object is 'phandles', use underscores for object name.
If not, such as 'node' or 'property', use hyphens for object name.
This CL also applies normal style for all nodes in npcx device-tree
files.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Upgrade core Python dependencies (setuptools, wheel, pip) at a system
level. Some old versions of pip do not resolve the dependency chain
correctly, this is why it has been added to the list.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
docutils is a core dependency of Sphinx. It is only used by some of our
custom Sphinx extensions.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add the nanopb library and generator tools as a module.
Nanopb is a small code-size Protocol Buffers implementation in ansi C.
It is especially suitable for use in microcontrollers,
but fits any memory restricted system.
Nanopb home: https://jpa.kapsi.fi/nanopb/
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This scripts receives the same parameter of what_changed.py. And run
coccinelle scripts for code guideline compliance in the given git
commits. e.g: ./guideline_check.py --commits origin/master..HEAD
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This coccinelle script can check some violations for rule 21.2.
Currently it is checking the follow reserved names:
"remove", "rewind", "malloc", "free", "exp", "signal"
It can easily be extended in the future though.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rebnase
This coccinelle script can check some violations for rule 5.7.
It can identify things like:
struct device *device
But it is not capable to identify:
struct test { ... }
...
int test;
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The implementation of blocking calls is common for all the client
models.
This change reduces the code duplication by introducing new API that
helps to manage acknowledged messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Switch the default LPC board configuration to select the
TFM_PROFILE_TYPE_MEDIUM choice, instead of directly setting
the TFM_PROFILE variable, as this is now made hidden.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a Kconfig choice for the TF-M profile, in
TF-M's Kconfig file. The reason for that is to be
able to easily enable additional configurations,
depending on the profile type being selected. We
also enhance the documentation of TFM_PROFILE,
stressing that there is now also profile_large
available as an option. TFM_PROFILE is now made
hidden, forcing the users to select one of the
available choice symbols. IF the TFM_PROFILE is
set to something other than "none", then certain
options shall be made hidden, namely, IPC and
isolation level, as they are determined by the
profile setting.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a dependency on IPC for the Audit Log secure service,
since the service is not compliant with the IPC model.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Explicitly ignore return value. Coverity was reporting that return
value assigned to rc was never used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modified eeprom shell fill command to be able to fill the complete
eeprom. The code of the fill command is now similar the new eeprom
read command.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Modified eeprom shell read command to be able to read out the complete
eeprom. The code of the read command is now very similar the flash
read command.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The k_mem_slab_init() calls create_free_list() which checks
the slab block alignment. Noticed with Intel ehl_crb board,
which is 64-bit architecture, that the k_mem_slab_init() fails
because the log_strdup_buf items were not aligned properly.
This commit adds the alignment requirement to log_strdup_buf so
that the elements are alignment properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Documentation build still contained references to the old top Makefile
and old known-issues folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It turns out that current known issues folder contains issues that are
no longer valid or present. I have searched for some of the regex
snippets listed but I have not been able to find any. Documentation was
the last active user of the known-issues folder, but has moved to
another solution.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow versions starting from 0.5.2 up to < 1.0, be the next major
releases. Major releases tend to include breaking changes, so better
restrict such releases until they are manually tested for potential
regressions.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Clarify usage of ENOSYS vs ENOTSUP and add comment in the release notes
about the recent changes to the APIs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The net_capture API documentation was not referenced by
network documentation so the API reference documentation
was not generated for it. This commit adds links to the
net_capture API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We have recently been hit by an issue between docutils and
sphinx_rtd_theme. The problem is fixed since release 0.5.2. In order to
avoid similar problems in the future, pin the theme version.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The check for NULL was on the pointer to the pointer,
rather than the pointer. The pointer of the pointer would
always be non-null, but the pointer might not be.
Moved from using a pointer of a pointer to just a
pointer to make it easier to read and understand.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After the commit c1f7b9f45a ("net: l2: ethernet: fix k_work API usage
in carrier on/off handling") each ethernet interface (including DSA
ports) shall first call ethernet_init() before carrier_on_of() function
is called.
As DSA ethernet interfaces (lan{123}) have their own k_work item to
monitor the carrier status (by reading switch IC registers), it was
necessary to move functions, which initialize it after the code which
sets up necessary interfaces (i.e. call ethernet_init(iface)).
In that way the error when accessing uninitialized members of ethernet
context is avoided.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Adds two functions:
1) Lookup periodic adv sync object by address
2) Get information about a periodic adv sync object.
These can be useful for the application verify if there is already an
existing sync to an periodic advertiser.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the ability to filter which properties get imported when we do an
include. We add a new YAML form for this:
include:
- name: other.yaml
property-blocklist:
- prop-to-block
or
include:
- name: other.yaml
property-allowlist:
- prop-to-allow
These lists can intermix simple file names with maps, like:
include:
- foo.yaml
- name: bar.yaml
property-allowlist:
- prop-to-allow
And you can filter from child bindings like this:
include:
- name: bar.yaml
child-binding:
property-allowlist:
- child-prop-to-allow
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace current filter setup with the warnings_filter Sphinx extension.
Note that current regexes have been simplified to make them more
readable while keeping the most relevant information.
Sphinx warnings are now treated as errors (-W).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Predefine ATOMIC_DEFINE in the Doxyfile so that documentation output is
generated correctly. In order to simplify the predefinition
ATOMIC_BITMAP_SIZE has been introduced.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This option prevents some structures to have missing pages on the
Doxygen HTML output.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add integration_platforms to testcase.yaml to catch issues during CI.
With out this change these tests only get build during the nightly CI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes: #33212
Upstream PR: https://github.com/ulfalizer/Kconfiglib/pull/103
Ignoring when user inputs NULL in a text field.
menuconfig exits with a python stack trace if NULL is provided as input
character, therefore ignore NULL as an input character to prevent this
behaviour.
A NULL character may be given accidentally by the user through the
following ways:
- Pressing `Win` key on keyboard (Windows only)
- Pressing `<CTRL>-@` / `<CTRL>-2`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a possibility to get values of accelerometer measurement for
all 3 axis of accelerometer with one channel_get().
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
During debugging I got "Got unexpected PDU" errors because a new CF was
received before the state was set to ISOTP_TX_WAIT_FC in the send state
machine. Setting the state before printing the debug information fixes
the issue.
Signed-off-by: Martin Jäger <martin@libre.solar>
Fixed addressing as specified in ISO 15765-2 encodes the source and
target address of a device or function inside the CAN ID according to
SAE J1939.
In order to allow to receive incoming requests from different nodes,
the CAN filter mask has to be set such that the source address is
ignored in the receive context. In addition to that, flow control
frames have to be sent back to the actual source of the request, which
requires adjustments to the TX CAN ID.
This commit implements above features and thus allows ISO-TP to be
used in a network based on SAE J1939 or NMEA-2000.
Signed-off-by: Martin Jäger <martin@libre.solar>
ISO 15765-2 specifies that the CAN frame length for single frames and
the last consecutive frame may or may not be optimized to the actual
length of the PDU payload. The ISO-TP implementation should only
consider the information from the N_PCI section.
The previous implementation did not allow padding. With this commit,
padding is allowed by default and can even be required to be more
compliant to AUTOSAR standards.
Signed-off-by: Martin Jäger <martin@libre.solar>
This adds bits to support using timing functions for displaying
paging histograms. Currently on qemu_x86_tiny is supported.
Also shorten the test names.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds bits to the paging timing histogram collection routines
so they can use timing functions to collect execution time data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The variable tsc_freq is not accessible in user thread
and is thus preventing user threads to convert cycles to ns.
So make tsc_freq available globally in default memory
domain so conversion is possible.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new kconfig CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT so
that the timing subsystem can be initialized at boot, instead of
being #ifdef under thread runtime statistics. This will allow
other part of kernel and other subsystems to utilize the timing
functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The arch_timing_* are not defined if timing functions are not
enabled, which results in compiler warnings about implicit
function declarations. So guard the header with its own
kconfig so the header can be unconditionally included by
other enough though timing functions are not enabled.
Note this is done inside the doxygen @defgroup or else
doc build would fail as timing_api group cannot be found.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to record execution time of eviction selection,
and backing store page-in/page-out in histograms.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds more bits to gather statistics on demand paging,
e.g. clean vs dirty pages evicted, # page faults with
IRQ locked/unlocked, etc.
Also extends this to gather per-thread demand paging
statistics.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Failing a backport is not a bug per-se. We create a GitHub issue to be
able to track the Pull Requests that failed to backport, but they should
not be considered bugs.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
PR #33746 introduced changes to the devicetree python file
that requires changes in the python code that imports the
devicetree module.
This was omitted in the west sign command implementation.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
The test_prevent_interruption() uses a key for the irq_lock(),
but the key has incorrect data type. This commit makes the key
unsigned int according to API docs.
Fixes#34023
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Add discovery of standard descriptor values. This provides a shorthand
instead of doing a read by UUID, allowing the application discovery
procedure to re-use the discover parameters for simple descriptors.
Fixes: #21489
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Server Characteristic Configuration definitions for bit values
and attribute value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The default APIC_TIMER_IRQ of 24 causes significant slowdown
in general tests and samples execution on this board. As the
value of ioapic RTEs increases, e.g. 48 in ACRN EHL CRB, the
APIC TIMER IRQ is stepped on. This commit tunes the config
for APIC_TIMER_IRQ to 48 for this board.
Fixes#33593
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Design a new testing that send and receive mailbox message with
different priority thread, and verify the high priority of receive
thread will receive firstly.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Add two testcases to test semaphore feature on system side. For example,
test semaphore usage and sync process between different priority threads
to verify the semaphore can be take by higher priority thread, and give
sem more than max value of semaphore that set in init step to verify sem
count is correct or not.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
This is an integration testcase for smp. It tests
the situation when smp is configed. Fatal can be invoked on
different core and system workq can also be run on different
core.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Add a testcase to test that read and write the
same buffer at the same time to check the
integrity of data reading and writing.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Test point:
1. Any number of threads may wait on an empty FIFO simultaneously.
2. When a data item is added, it is given to the highest priority
thread that has waited longest.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Make this driver multi-instance and use the new API.
This commit makes use of some DT macro helpers
In particular:
- get bus devices with DEVICE_DT_GET
- get SPI information with SPI_CONFIG_DT_INST
- get drdy gpios with GPIO_DT_SPEC_GET
Moreover the driver is now using the stmemsc common
routines as requested in issue #33440 and it avoids
the unnecessary declaration of both ctx_i2c and ctx_spi
in the data structure.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Create a common properties file that will be included by all bindings
(as i2c and spi) handled by lsm6dso driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a note in the 2.6 release notes about configuring QEMU
to run in CI on mps2_an521_nonsecure with TF-M as the secure
firmware component.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When running the test on Cortex-M platforms, use access to
_current to trigger a memory access fault, as this address
is guaranteed to be in kernel ram and will not trigger
SecureFault exceptions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Build and execute tests tagged with -arm, -kernel,
and -userspace, for mps2_an521_nonsecure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
By default, if we build for a Non-Secure version of the board,
force building with TF-M as the Secure Execution Environment.
An exception is when we build openamp samples, where the non-
secure image is basically used for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for u-blox BMD-330-EVAL which uses the nRF52810.
This board is functionally equivalent to the nRF52dk_nrf52810
with the exception of not having debug-in and the shield SWD
header. DEVELOP_IN_NRF52832 is *not* required since the IC
used is the nRF52810
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52810.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected file permissions, added newline at end of CMakeLists.txt
Corrected comnment that said NRF52832 instead of NRF52810
Adding missing copyright information
Corrected link to u-blox BMD-330 (was pointing to BMD-300)
Addressed review comments, corrected permissions
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
L2CAP channels are allocating buffers from common data_pool. For that
pool buffer count was hard-coded as 1. This count should be set to value
CHANNELS, allowing each channel to allocate buffer for incoming
data. Without this change, execution would stuck at l2cap_chan_le_recv()
as we give net_buf_alloc() in alloc_buf_cb() no timeout.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Support for ST Nucleo-64 Development board with STM32L412RB SoC.
Tested samples: hello_world, blinky, button.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Add BT_UUID_IAS for Immediate Alert Service
Add BT_UUID_LLS for Link Loss Service
Add BT_UUID_HPS for HTTP Proxy Service
Add BT_UUID_ALERT_LEVEL for Alert Level
Add BT_UUID_URI for URI
Add BT_UUID_HTTP_HEADERS for HTTP Headers
Add BT_UUID_HTTP_STATUS_CODE for HTTP Status Code
Add BT_UUID_HTTP_ENTITY_BODY for HTTP Entity Body
Add BT_UUID_HTTP_CONTROL_POINT for HTTP Control Point
Add BT_UUID_HTTPS_SECURITY for HTTPS Security
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Ups the CDB_NODE_COUNT config to fit 16 nodes, to make the sample more
usable for general mesh testing.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds blocking operation to the self configuration step by waiting for
the status response. This ensures that the provisioner is fully
configured, and reduces the number of loopback buffers required for the
self-configuring.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Runs the Provisioner sample's main thread in a cooperative priority to
avoid calling the Bluetooth APIs from a preemptive thread.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Instead of only configuring the Health Server model of the provisioned
device, the Provisioner will instead walk the target's composition data,
and bind each model to the same AppKey. This allows the provisioner to
be used with the base mesh sample, and demonstrates the new composition
data page 0 API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a parsing mechanism for Composition data page 0 in the Config
Client API, and uses it in the shell module to parse the incoming
composition data.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The first byte of the composition data status message is the returned
page index, not the status of the request. This is now reflected in the
API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The SD Card below Physical Layer 1.10 does not support CMD6.
When usdhc_sd_init is executed, it will fail to exit due to
execution of CMD6, causing the SD Card to not work normally.
For different SD Card Physical Layer specifications,
the following modifications have been made:
Version 1.10 and above support CMD6.
Version 3.0 and above support CMD6 Group 3 (driver strength
and current limit) .
Signed-off-by: Frank Li <lgl88911@163.com>
In a previous commit, a check was added to ensure modem was properly
attached to packet service before initializing PPP. Failure to perform
this check can lead to the dreaded 'NO CARRIER' issue.
While this is a nice idea, the implementation was lacking because when
the check failed, the entire modem initialization procedure was
restarted from square one. For modems/bearers that were slow to attach,
this is potentially disastrous. The proper solution is to loop only the
'AT+CGATT?' part until it succeeds, or fails N times.
This commit implements this looping behavior (using the work queue).
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Make bluetooth.init tests for nRF platform pass again by adding ULL/LLL
stub functions, and fixing minor compile issues.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fixes the FlexSPI NOR flash driver to register a new log module rather
than declare membership in the FlexSPI controller module, which was
recently moved from drivers/flash to drivers/memc.
This fixes build errors with the mimxrt1064_evk board in:
- samples/drivers/flash_shell
- samples/subsys/fs/littlefs
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Currently the MAX17055 driver assumes that a battery matching the
default characteristics is used.
This change allows battery characteristics to be specified in device
tree and writes them to the MAX17055 on initialization.
Existing default values are maintained for backwards compatibility.
Initialization routine taken from MAX17055 Software Implementation
Guide, document UG6365.
Signed-off-by: Hayden Ball <hayden@playerdata.co.uk>
The display controller and SDMMC slot both define GPIOs for their chip
select signals, so enable GPIO drivers by default for this shield.
This missing default was discovered in CI when extending the fat_fs
sample to build with this shield. Many boards enable GPIO drivers by
default, but some boards like sam_v71_xult and sam_v71b_xult do not.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new sample configuration to build the fat_fs sample with the
adafruit_2_8_tft_touch_v2 shield and SDMMC SPI driver in CI. It has been
tested with frdm_k64f and mimxrt685_evk_cm33 boards, but should work
with any board that supports Arduino SPI and Arduino GPIO features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the pinmux for the Arduino D4 pin to allow using it as a
gpio. This is needed by the adafruit_2_8_tft_touch_v2 shield for SDMMC.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the adafruit_2_8_tft_touch_v2 shield board to enable SDMMC by
default when disk drivers are enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The device tree overlay for the adafruit_2_8_tft_touch_v2 shield board
was incorrectly mapping the Arduino D4 pin, used for SDMMC chip select.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
On the FRDM-K64F board the SoC uses the 100 pin LQFP package version of
the SoC (MK64FN1M0VLL12). This pacakge doesn't pin out PTA28 or PTC19.
So remove setting them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Write Protect pin of the internal SPI flash can be controlled by
WP_IF bit in DEV_CTL4 register. Add functions to set/get the status of
WP pin.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Change-Id: I8a0ce131f006f919a3b38a65722d0d312314ff0a
The system include directory might include spaces on windows, so quote
it.
Partially part of fix for #32111
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initially the flexspi device only supported a flash driver for
external NOR flash. As the controller supports HyperBus devices,
which can be either volatile or non-volatile, the driver iss moved
to drivers/memc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adds a Kconfig option to set the minimum key size accepted
by this device. This can be used to e.g. enforce 128-bit keys.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
New STM32F3 Discovery boards are shipped with different
sensors. This PR adds a new revision for the board, supporting
the new acceloremeter/magnetometer sensor.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
The adc1 of the stm32f373 uses an address space and a bus that are
different from the other microncontrollers of the f3 family. So, let's
remove the adc1 node from the stm32f3.dtsi and add it directly, with
respective correct values, in each of the SoC variant files.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
We are now in the process of extracting edtlib and dtlib into a
standalone source code library that we intend to share with other
projects.
Links related to the work making this standalone:
https://pypi.org/project/devicetree/https://python-devicetree.readthedocs.io/en/latest/https://github.com/zephyrproject-rtos/python-devicetree
This standalone repo includes the same features as what we have in
Zephyr, but in its own 'devicetree' python package with PyPI
integration, etc.
To avoid making this a hard fork, move the code that's being made
standalone around in Zephyr into a new scripts/dts/python-devicetree
subdirectory, and handle the package and sys.path changes in the
various places in the tree that use it.
From now on, it will be possible to update the standalone repository
by just recursively copying scripts/dts/python-devicetree's contents
into it and committing the results.
This is an interim step; do NOT 'pip install devicetree' yet.
The code in the zephyr repository is still the canonical location.
(In the long term, people will get the devicetree package from PyPI
just like they do the 'yaml' package today, but that won't happen for
the foreseeable future.)
This commit is purely intended to avoid a hard fork for the standalone
code, and no functional changes besides the package structure and
location of the code itself are expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The file is only really used on STM32 SoCs so we can move the contents
that are relevant into pinmux_stm32.h and remove the file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add information to documentation how to monitor and capture
received and sent network traffic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_l2_send() function which will be called by each L2
sending function so that we can catch all the network packets
that are being sent. Some L2 layers send things a bit differently,
so in those cases call the net_capture_send() directly by the L2
layer.
Add network packet capture call in receive side after the pkt has
been received by the RX queue handler. This avoids calling the
net_capture_send() from ISR context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add an overlay-capture.conf file that can be used to allow network
packet capturing in this sample app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A simple application that allows you to use net-shell to
configure network packet capturing. The captured packets are
sent to external systems for processing. This can be used
for debugging network protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net mem" command did not print external net_pkt slabs
properly (the number of free net_pkt's was not printed).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Show detailed information about network interface that is down,
only when user asks such information about one specific network
interface. This means that for "net iface" command only
"Interface is down." is printed but the command "net iface 1"
will print detailed information even if interface is down.
This helps to view the information and user does not need
to bring interface up to see the details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add infrastructure to allow user to configure the system so that
all the network packets, that are sent to or received from a specific
network interface, are sent to remote system for analysis.
The captured network packets are placed as a payload in UDP packet,
which is then sent inside a tunnel to a remote host. The host can
then receive the packets and for example show them in wireshark.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add get/set helpers to store information whether the net_pkt
is captured already or not. This bit is used to detect capture
loop and avoid recursion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of forcing net_pkt_clone() use the tx_pkts slab, use
the same slab that was used when allocating the original net_pkt.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPIP tunnel capability bit helps to detect which network
interface supports IPIP tunneling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shared data can't live on thread stacks if they are incoherent. These
are all just per-test-case data, so make them static.
Fixes#33898
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Usually, GCC builtin or arch-specific atomic functions are being
used. The corresponding kconfigs are "selected" by architecture
or SoC kconfigs. CONFIG_ATOMIC_OPERATIONS_C is usually used to
override the GCC built-in or arch-specific atomic functions when
these two are not supported. So change the priority of #include
so that C version is included first if selected, and skips
the inline versions of the other two variants. Or else there
will be two compiled versions of atomic functions: inline version
and the compiled C version. Note that the arch-specific version
and builtin are swapped, so the builtin one is now the default.
Fixes#33857
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The builtin atomic header file should not include the syscall
header that is generated from C version of atomic functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa cores are highly configurable so each SoC may not have
the needed instructions for the hardware assisted atomic
operations. So instead of selecting the arch-specific atomic
operations kconfig, do a "imply" instead. So SoC or board
configs can disable this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implement SO_BINDTODEVICE socket option which allows to bind an open
socket to a particular network interface. Once bound, the socket will
only send and receive packets through that interface.
For the TX path, simply avoid overwriting the interface pointer by
net_context_bind() in case it's already bound to an interface with an
option. For the RX path, drop the packet in case the connection handler
detects that the net_context associated with that connection is bound to
a different interface that the packet origin interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Turns out that we could flatten the tree further as there is not
that many files to warrant a whole directory for this.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The STMEMSC HAL i/f requires every driver using it to define
for each instance a stmdev_ctx_t structure, which is used to
export the hardware specific APIs to handle i2c and spi busses
operations. Since this structure is bus agnostic, there is no
need to declare it twice for both i2c and spi. Instead, declare
only one structure, which will be populated either with i2c APIs
or with spi APIs according to where that particular instance is
declared inside the DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Make use of the stmemsc i2c/spi read/write routine that
has been introduced to simplify the ST sensor drivers code.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add common i2c/spi read/write routines for the benefit of those
ST sensor drivers who make use of the stmemsc HAL i/f.
Add generic stmemsc_cfg_i2c and stmemsc_cfg_spi structures which
contains all relevant information required by i2c/spi low level
routines, such as:
- the pointer to the bus device
- the I2C slave address (if instance is on I2C bus)
- the spi_config structure (if istance is on SPI bus)
This level of abstraction allows the re-use of the i2c/spi read/write
routines among all stmemsc based sensor driver without the need to
reference the specific sensor data and or config structures.
The STMEMSC HAL source code is located here:
zephyrproject-rtos/modules/hal/st/sensor/stmemsc/
Signed-off-by: Armando Visconti <armando.visconti@st.com>
soc/arm/st_stm32/CMakeLists.txt already has a
zephyr_include_directories(common) so including in again
soc/arm/st_stm32/common/CMakeLists.txt is redudant.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
An option has been added which can be passed to setsockopt
which allows the user to set & get the dtls handshake timeout,
either before first handshake or online.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
CMSIS_DSP and net_socket tests are either too
slow or too large for this platform, also drop
bluetooth for test
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Remove dead code from twisterlib.py which is a copy of code
from twister script. This redundancy causes pylint errors in
compliance checks.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Enable half transfer interrupt of the dma controller
in case the channel was enabled in circular mode.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
The usage of EXTRA_DTC_FLAGS was removed in commit
269f350487
If ninja was used and e.g. menuconfig is called, when more than one
element is in EXTRA_DTC_FLAGS, calling "ninja menuconfig" failed.
E.g.
west build -b lpcxpresso55s28_ns -t menuconfig samples/hello_world
resulted in and error. This is fixed with this commit.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
After 3a58b45ced introduced the option
of specifying valid board revisions, it is no longer needed to provide
a .conf file for each revision. Remove then the files that were added
solely for this reason and use the VALID_REVISIONS parameter instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On stm32, the M bits defines the length of the frame between the start
bit and the stop bit, eventually including the parity bit when enabled.
Fix configuration of databits to set correct M bits when parity is
enabled.
This commit tries to address issue zephyrproject-rtos/zephyr#33351
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
STM32L011 and STM32L031 do not support USART1.
This commit moves the definition of the node to only
be present for MCUs which support the peripheral.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
TIM7 peripheral was defined for all STM32L4 chips
in the device tree when not every chip supports it.
This commit moves the node so that only chips
which support the peripheral have the node defined.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
The device tree includes CAN node can1 for all
STM32L4 chips when in fact they don't all support it.
This affects STM32L412xx and STM32L422xx.
Fixes#33896
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Update revision of hal_nordic which introduces new radio driver
integration scheme.
The glue cmake has been updated to use the new integration scheme
for the nrf-802154 component.
Added config option to exclude radio driver in hal_nordic from the
build process. This allows the radio driver to be supplied from
other sources.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The default value is not needed because there is only one choice.
This allows the default choice to be set in a different module.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Fix packet reordering in ATT when putting the host under high load.
In certain conditions a packet can be transmitted while there is
elements in the TX queue in bt_att_send. This means that the packet will
skip ahead in the TX queue leading to packet re-ordering.
Fix by always appending to the queue, and then initiate sending of the
HEAD of the queue.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some tools consider this as commented code because of the ifdef, so
remove that and fix a coding guideline violation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests of a value against zero should be made explicit, unless the
operand is effectively Boolean. This is based on MISRA rule 14.4.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests of a value against zero should be made explicit, unless the
operand is effectively Boolean. This is based on MISRA rule 14.4.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a 'U' suffix to values when computing and comparing against
unsigned variables and other related fixes of the same MISRA rule (10.4)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The size of ctx->rx_adu.data is not CONFIG_MODBUS_BUFFER_SIZE. Coverity
flagged the potential overwrite so just use sizeof().
Fixes#33789Fixes#33792Fixes#33818
Signed-off-by: David Leach <david.leach@nxp.com>
With these changes, dial up Zephyr application/driver can use
socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW) for creating
a socket for sending/receiving data to/from ppp net link, i.e.
packet is going to/from PPP L2.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Introducing PPP dialup features to enable e.g. usage of nrf9160
based board as a dialup modem for transferring ip data over PPP
(e.g. windows dial up), i.e. usage of Zephyr PPP as a server for
providing MTU/MRU, IP address and DNS addresses for a PC:
- PPP LCP MRU option (configurable)
- PPP server: IPCP ip and dns address peer options to enable
providing IP and DNS addresses for PPP peer.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The specification states that the server can cancel observations "at any
moment, by sendinga GET request with Observe option=1, the LwM2M Server
cancancel an “Observe”operation on a specified Resource, or specified
Object Instance(s)."
It does not mention any token matching requirement, but RFC 7641 does.
The correct interpretation is not obvious. The EMQx LwM2M implementation
uses a new token for instance, which does not work with Zephyrs token
matching cancel-observe.
This commit introduces cancel-observe via path matching as a Kconfig
option. This could hypothetically introduce problems when we are
connected to multiple peers simultaneously, but since that is not likely
to be supported for a long time (if ever), this change should be fairly
uncontroversial since path matching is only used as a fallback.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The comparison was inverted before so configuring a valid window
providing min and max was not possible.
Now the comparison is corrected and only done if the watchdog is used in
windowed mode.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Use a combination of fixed-clock and fixed-factor-clock devicetree
nodes for describing the clock dividers/multipliers of the NXP Kinetis
System Clock Generator (SCG) present in the KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commit 58a0ba6dbb removed the call to k_sched_unlock from
pm_system_resume() consequently the scheduler lock in
pm_power_state_force() was left unbalanced. Just fixing it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Support single mode operation by enabling it and
making the driver to use the interrupt to findout
when the data is ready for fetch. The sample fetch
will be blocked for a specified maximum time untill
the interrupt happens.
* Make operation mode configurable in DTS file
* Make offset cancellation configurable in DTS file
* Use single common .yaml file for both i2c and spi
* Store above configurations in dev->config_info
Signed-off-by: Masoud Shiroei <masoud.shiroei@assaabloy.com>
Remove unnecessary "\n" at the end of logs.
Change LOG_DBG to LOG_ERR wherever is appropriate
Signed-off-by: Masoud Shiroei <masoud.shiroei@assaabloy.com>
This commit creates two new files in the device tree
1. stm32l412X8.dtsi
2. stm32l412XB.dtsi
This will specifcally add stm32l412X8 to the device tree
which was not supported before. Also the memory
for stm32l412XB was not defined specifically before.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Current implementation of poll prepare/update could end up busy looping
if `poll()` function was called before/during DTLS client handshake
(i. e. `poll()` called before an initial `send()`).
Fix this, by monitoring the handshake semaphore, already available in
the tls_context structure for DTLS client instead of underlying socket.
After the handshake is complete, switch to monitoring the underlying
socket instead.
For DTLS server this is not needed, since the handshake is initiated in
the `recv()` function, therefore any incoming data should trigger the
handshake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- When malloc() is called with a size of 0 we should not set errno
to ENOMEM as there is no actual allocation failure in that case.
This duplicates the realloc() behavior.
- Put unlock_ret assignments on separate lines, otherwise gcc complains
about unused variables when the tests on it are disabled.
- There NULL return added in 952970d6cb are completely pointless.
First, there is no reason for sys_mutex_unlock() to fail, and even
if it did, those returns would be blatent memory leaks. Remove them.
No one should blindly modify code just to make static code
analysers happy.
- Replace all CHECKIF() by explicit assertion statements to uniformize
those checks and drop the NULL returns entirely. We can't return
anything in the free() case, and there are no runtime conditions
for sys_mutex_lock() to sometimes succeed and sometimes fail anyway.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix 2 resource leaks issues of coverity scan, actually the return of
NULL pointer is expected, but there is no harm done to free a NULL
pointer in our design, so adding them to pass the scan.
Fixes#33802 CID: 220434
Fixes#33785 CID: 220451
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Do not run workflow on each issue change, instead run every 10 minutes.
Running this on every issue open/close/label will cause reaching API
call limit very fast when issues are automatically created from coverity
or during bug triaging sessions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix the calculation of event delay when starting a radio
event. The calculation and check was incorrect causing
event abort when radio event was setup before the preempt
timeout by the lll_done when the next prepare was already
in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a CIS indication is received and CIG ticker is already started,
calculate the absolute time of the first subevent of the new CIS,
and validate the handle. This will allow the LLL prepare to see a new
valid CIS, and calculate the offset within the CIG event, where the new
CIS should start. This offset is then valid for all following events for
the duration of the CIS.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add missing #if defined(CONFIG_BT_CTLR_DF_ADV_CTE_TX) statements
to fix build errors of Direction Finding code when
the CONFIG_BT_CTLR_DF_ADV_CTE_TX Kconfig entry is not set.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable possiblity to use debug pins for controller debugging
purposes with nrf52833dk_nrf52833 board.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Splits the file into radio_nrf5_ppi.h and radio_nrf5_dppi.h
and moves the nRF53 DPPI to radio_nrf5_dppi.h.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
Rewrite to use subscribe and publish functions for the
different peripherals. This will make it possible to test
the controller in a simulator.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
Explicitely mention that these files are intentionally empty. These
changes should make compliance checks pass.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Format the configuration file so that it is more consistent (e.g.
uniform usage of single/double quotes).
Some minor cleanup performed too: removed some comments and a default
setting.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Switch to pathlib to make configuration more readable. sys.exit has been
replaced with an exception so that in case of failure error is displayed
(error details were hidden).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Organize configuration sections per group (project, general, HTML,
plugin options...).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is easy to have out-of-date comments since Sphinx settings evolve
(defaults, behavior...). A reference to the official documentation is
provided at the top of the file instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manpage, texinfo and htmlhelp builders are not used, so remove their
settings as they are redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove options that are commented out from conf.py. It improves
readability of the file.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move static content to _static. It is better to prefix all Sphinx
related folders with an underscore to emphasize that the folder does not
contain actual documentation. Static content gets copied into _static
folder when documentation is built, so it also makes things more
consistent.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some of the generated documentation depends on the devicetree scripts.
E.g. the bindings index uses edtlib.
We don't have a well-defined interface boundary here for managing
dependencies, so let's just add the entire dts directory to the
'paths' glob list in doc-build.yml. This will ensure we don't
accidentally change some DT implementation detail in a way that breaks
the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The jlink runner performs a version check which is skipped on
Windows. If running inside WSL we also need to skip.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow a custom (remote) gdb host passed as a debug argument
which tries to connect to an existing one instead of creating one.
This also allows to run the gdb server outside of a WSL
in Windows and the debugger inside of the WSL environment.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Also, explicitly check for NULL.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return -ENOSYS when implementation is missing and -ENOTSUP if the
feature is not supported. Those are 2 things. Missing implementation
(-ENOSYS) means that the driver is lacking support for the feature,
-ENOTSUP means we have an implementation but some parameters or
conditions makes the request unsupported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove Linux specific warning which has been causing confusion and
incorrect usage of return codes just to comply with checkpatch.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ID validation check would always fail with IDs less than
OTS_OBJ_ID_START_RANGE, where the intention was that it should
allow the OTS_OBJ_ID_DIR_LIST (0) value as well if
CONFIG_BT_OTS_DIR_LIST_OBJ was enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of defining the string, that will be reported by DFU
as a name for DFU target, in code, pick it from the DTS label that
will be the DFU target.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Alternative settings are determined by number of flash partitions
available for DFU from DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds macro that, using the DTS identifier, allows to
extract flash area label from DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
IPv6 source address selection procedure selected link-local address
for any muticast destination with other scope than mesh-local. It
was a cause of problems for broader multicast scopes like admin-, or
site-local. For such broader scopes source address must be at least
as broad as the scope of multicast destination.
This patch updates IPv6 source address selection procedure. Now
link-local address is selected only for link-local destinations,
including multicast destinations. For broader destination scope,
source address with broader scope is selected.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
The interrupt_util.h provides utils of trigger irq, now move them into
testsuite. All of the needed test cases can make use of them.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Fixed Coverity CID: 219524 : Dereference after null check
For fix this issue added null check before call function pointer
Fixes#32913
Signed-off-by: JuHyun Kim <jkim@invensense.com>
Fix missing big_disconnect in hci_le_big_complete when the number of
BIS in the event is invalid.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Validate the big_handle before received from the controller before
using it as an array into the bigs array.
Discover by coverity: Insecure data handling (TAINTED_SCALAR)
Using tainted variable "big_handle" as an index into an array "bigs".
Cleanup state of BIG in pending or syncing state if it exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parsing BIG handle which is just one octet as a two octet field,
which could have caused problems on big-endian systems.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the BIG initialized atomic handling to use bits instead of a
single atomic.
This allows for more bit flags to be added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Write this in terms of DT_GPIO_CTLR_BY_IDX instead of the lower level
DT_PHANDLE_BY_IDX for clarity and parallelism with things like
DT_SPI_DEV_CS_GPIOS_PIN, which is written using DT_GPIO_PIN_BY_IDX
instead of DT_PHA_BY_IDX.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix race conditional when create connection cancel is called
and actually a connection did get setup while initiator is
being stopped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile adv_addr which is only used by
controller when supporting initiator/central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initiated bit flag into role specific union, so that
other role specific bit flags can share bit space in the LLL
context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix flash driver sync regression introduced due to changed
default ULL_HIGH in the commit 30634334a8 ("Bluetooth:
controller: Fix ULL_HIGH priority to be lower than LLL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ticker implementation to return lazy value for a
ticker when enumerating active tickers with time
reservations.
This is required to find offsets and to use the lazy value
to correctly calculate event and payload counter values that
needs to be filled into SyncInfo and BigInfo structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Even though possible to use external pull-up and open drain buffer,
prefer internal pull-up to reduce power consumption.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Previously, a non null-terminated "string" could
be passed to z_impl_net_addr_pton if the string was
exactly `INET6_ADDRSTRLEN` long.
Signed-off-by: James Harris <james.harris@intel.com>
Add a testcase to test pop data from stack by
mutil-threads, verify data will be poped by
the highest priority thread that has waited longest
firstly.
stack integration
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
The compiler shows the array bounds warning message for some boards
which don't set the PSL function.
Change npcx_pinctrl_psl_input_asserted() input parameter from int to
uint32_t to fix it.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Fixing problem where k_fifo functions have been used to get/put
data from/info net buf, where documentation has been strictly
forbidding so.
Found, reported and solution suggested by jrhees-cae.
Fixes: #32579
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add remaining NXP KE1xF SoC dtsi files to support out-of-tree boards
using other variants of the KE1xF than the single in-tree board.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Consistently use ticks for timing purposes.
Fix retry logic.
Check flags when osFlagsWaitAll is not set.
Fixes#31103
Signed-off-by: Artur Lipowski <Artur.Lipowski@hidglobal.com>
Adds a sample of setting up and using an ISO central as
a source of ISO data. This will periodically send ISO
data to a connected ISO peripheral with varying sizes.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The API is deprecated as it was decided to build in the flash protection
service into write and erase procedures.
This is solution chosen for fix following issue:
When two or more threads writes to flash device it is
possible that flash protection will be enabled by one of
threads despite another thread(s) still needs it disabled.
fixes#3127
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Removed two unneeded `if` statements. These statements had not
effect in function results.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
flash_write_protection_set() was deprecated.
This patch removes usage of it and the test case which was
testing deprecated API behaviors.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
flash_write_protection_set() was deprecated.
This patch removes usage of it and the test case which was
testing deprecated API behaviors.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
flash_write_protection_set() API was deprecated so driver
implementation interface is left behind as well.
This patch removes all implementation pointed by the interface
'struct flash_driver_api.write_protection'.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Made write_protection handler not mandatory.
flash_write_protection_set() becomes no-operation.
If write_protection handler is provided by the driver implementation
it will be called within flash_writ() and flash_erase().
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
As CONFIG_FLASH_SIMULATOR_ERASE_PROTECT become a dead option.
this commit removes it as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
Write procedure was fixed so it doesn't lock the driver after
failure anymore.
flash_write_protection_set() will be deprecated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Flash write protection services were integrated into erase and write
procedures. This is step required for fixing following issue:
Multi-threading flash access is not supported by
flash_write_protection_set().
flash_write_protection_set() will be deprecated.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added support for RNG for stm32l562e_dk board, and updated
the document.
Tested with sample entropy project.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
Added support for RNG for nucleo_l552ze_q board, and updated
the document.
Tested with sample entropy project.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
* Assumes that the USB2_OTG peripheral is being used in FS mode, as on
the NUCLEO-H743/753.
* Disable ULPI on USB2_OTFG, enable FS clk.
* Enable USB voltage detect and disable USB reg, per STM app notes.
Signed-off-by: Jeremy Wood <jeremy@bcdevices.com>
All IPSO objects that utilized the non-standard timestamp extension now
implement their model in version 1.1, which contains the Timestamp
resource. As it's no longer needed to add timestamp in a non-standard
way, simply remove LWM2M_IPSO_TIMESTAMP_EXTENSIONS option.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update IPSO Pressure Sensor object implementation to support object
model version 1.1.
Add missing optional resources for the object model version 1.0.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some of the objects redefined reusable resources IDs, while others used
a common header which defines resource IDs. Unify the approach and use
the header in every object.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each object now have to specify the object version it implements.
Based on this information the LwM2M engine can decide whether it's
needed to report the object version during Registration/Discovery
operations or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
k_work_schedule() is supposed to be a no-op if the work item is
already scheduled or submitted: the previous schedule is left
unchanged. The check incorrectly inhibited the schedule operation
when the work item was neither scheduled nor submitted, but was
running.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move the top-level Makefile to the documentation folder as it is only
used for documentation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Sphinx supports parallelized build (-j) option. Setting it to `auto`
makes use of all available cores. This option seems to speed up the
build significantly on multi-core machines.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
checkpatch requires a Makefile to be present at the top-level directory.
Remove this requirement.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This sample is a bit messy; clean it up.
Remove unused includes, add missing include guards, clean up the
separation of responsibilities between main.c and the button and LED
helper files by moving code around, and replace the now-outmoded
device_get_binding() calls with GPIO_DT_SPEC_GET().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Drop device_get_binding() for microbit, using a gpio_dt_spec instead.
Rename the 'button' global to 'button_work' since it's a k_work
related to the button and does not actually represent the button
itself.
Fix a typo in the docs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Save a bit more SRAM on bbc_microbit by tuning some Kconfigs.
Mark some arrays const to try to avoid stack allocating them while
we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET on the chosen node directly.
The only in-tree board using the Kconfig option is rv32m1_vega_ri5cy.
It already sets the chosen node in the application overlay, albeit
incorrectly, so just fix it there and remove the now-redundant Kconfig
setting. That in turn triggers other build errors for this board, but
they don't seem to be related to this sample.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use DEVICE_DT_GET_ANY instead of hard-coding a device label property.
As far as I can tell from in-tree drivers, "TEMP_0" is nRF specific
and refers to nodes with compatible "nordic,nrf-temp", so use that and
clean up the driver Kconfig while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This allows RST documentation to do something like this:
See :dtcompatible:`vnd,foo` for more information.
This is transformed into a link to documentation for the "vnd,foo"
compatible.
Some devicetree compatibles may be handled by multiple bindings.
This can happen when the binding file is bus-dependent. Therefore, to
make this work, we need to change the way gen_devicetree_rest.py works
to ensure we have a good source of information for this compatible
regardless of how many bindings are associated with as follows:
- When only a single binding is associated with a compatible, the
:dtcompatible: link goes directly to the per-binding HTML page.
- When multiple bindings are associated with a compatible, this goes
to a new generated "disambiguation" page which links to all the
per-binding pages.
To avoid clashes, we stick the disambiguation pages into a
compatibles/ subdirectory of the generated bindings index root
directory.
Also reorganize the generated bindings output directory into
.../bindings/subdir/binding.rst files. For example,
dts/bindings/arm/arm,dtcm.yaml now gets its generated content in
.../bindings/arm/arm,dtcm.rst.
This brings the 'category' of binding (like 'sensor', 'i2c', etc.)
into the URL, which is a useful hint.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a helper which allows you to skip the intricacies of instance
numbers to express the intent of "give me a random enabled node with
this compatible; I don't care which one".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Our description of 'compat' parameters is all over the place.
Make it consistent by picking one.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The NRF UARTE has an undocumented feature that when you flush the RX
FIFO, the RXAMOUNT register is not cleared to zero if the FIFO is in
fact empty. This fix is correcting something that was most likely a
typo.
Signed-off-by: Petri Oksanen <petri@iote.ai>
Add validation of the case when package buffer is not aligned to
CBPRINTF_PACKAGE_ALIGNMENT.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended test to validate case when package buffer is not aligned to
CBPRINTF_PACKAGE_ALIGNMENT.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Unified define used for handling sparc case in static and
runtime packaging. Reworked macro for storing argument in
static packaging.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added parameter to CBPRINTF_STATIC_PACKAGE which indicates buffer
alignment offset compared to CBPRINTF_PACKAGE_ALIGNMENT. When offset
is set to 0, macro assumes that input buffer is aligned to
CBPRINTF_PACKAGE_ALIGNMENT. When offset is positive, macro assumes
that buffer address is shifted by given number of bytes to
CBPRINTF_PACKAGE_ALIGNMENT alignment.
Extended cbprintf_package to use len argument as alignment offset
indicator when calculating length only (package pointer is null).
Features are not available for xtensa platform which seems to
require 16 byte alignment from the package. It is only an assumption
due to lack of the documentation and may be fixed in the future.
Feature allows to avoid unnecessary padding when package is part of
a message and preceeded by a header of a known size. For example,
message header on 32 bit architecture has 12 bytes, long doubles are
not used so cbprintf requires 8 byte alignment. Without alignment
offset indicator, package containing just a string with one argument
would need 4 byte padding after the header and 4 byte padding after
the package. Message would be 32 bytes long. With alignment offset
indication both paddings are not needed and message is only 24 bytes
long.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
XCC does not support using the deprecated attribute for enum
as it is based on old GCC 4.2. So nullify the macro to avoid
compilation errors.
Fixes#33548
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the first network interface is down when the net config init
is run, then the IP addresses etc would be set to wrong network
interface. So when initializing the network, try to first find
a network interface that is auto started and use that to configure
IP addresses etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When printing network interface information print index or
index + pointer, so that the output is more user friendly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As DAD is not done for point-to-point links, we can mark them
valid immediately. If this is not done, then the address will
never be picked as a source address to a sent packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Useful to know what flags are set for the network interface
so print them in the shell by the "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that allow caller to create IPv4 header with
possibility to set various fields in the header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Application can disable IPv4 or IPv6 later if those are not
needed nor used for a given network interface.
Fixes#14581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds to page on the x86 virtual memory about how to specify
extra page table mappings during build.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the assert when a large page is encountered to
copying the page directory entry to the new page directory.
This is needed when a large page entry is generated by
gen_mmu.py. Note that this still asserts when there are entries
of large page at higher level.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes the gen_mmu.py script to error out if the reserved space
for page table in zephyr_prebuilt.elf is not large enough to
accommodate the generated page table. Let catch this at build time
instead of mysterious hangs when loading the page table at boot.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The whole page table is pre-allocated at build time and is
dependent on the range of address space. This kconfig allows
reserving extra pages (of size CONFIG_MMU_PAGE_SIZE) to
the page table so that gen_mmu.py can make use of these
extra pages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for u-blox BMD-300-EVAL. Also includes BMD-301-EVAL
and BMD-350-EVAL. All share the nRF52832, and are functionally
equivalent to the nRF52dk_nrf52832 with the exception of not
having debug-in and the shield SWD header.
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52832.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected type in index.rst (should be nRF52dk_nrf52832, not ..810)
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
The GPIO drivers are initialized in the POST_KERNEL level with the
default priority, so whether they're available at the time the sysinit
function requires them depends on how the linker orders the init
records. Since we can't set a priority relative to the default
priority, hard-code the maximum priority and hope it's good enough.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
LL_CIS_IND starts a ticker for the created CIG, using the event_counter
and offset provided. Ticker generates callbacks to
lll_peripheral_iso_prepare. Event done with ISO (extra) type is demuxed
and done handled for CIG including ticker update with drift
compensation.
TODO: Handle multiple CISes as well as pause/resume and scheduling
latency.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implemented LL_CIS_REQ/RSP and LL_CIS_IND handling to allow a central
to establish a CIS connection. Implementation is temporary, for
test/development purpose and should be re-implemented in the new LLCP
framework when ready.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add dts files for the specific chip instances that are used on the
boards in prep of having pin data in devicetree. The pin data will
be specific to the given chip instance so we need to distinguish
unique chips for the same SoC as the pin mux will differ.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixing issue 219727. Potentially negative return value was passed
to a function that was expecting positive value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update collaborators and maintainer of some orphaned areas. Also update
path for some of the areas to include tests and samples.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The low power states 0∕1∕2 are added to the stm32wb55rg
nucleo board, with default min residency values.
The substate-id is mapping the same Zephyr power state.
They correspond to the stm32wb55 low power stop0/1/2 modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The low power states 0∕1∕2 are added to the stm32wb.
The substate-id is mapping the same Zephyr power state.
They correspond to the stm32wb low power stop0/1/2 modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The debug config will let the clocks active in STOP mode
at init.
The substate-id is mapping the same Zephyr power state.
Plus a minor fix in the Kconfig.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enable MSI hardware auto calibration for this stm32l562
disco board. It depends on the STM_LSE clock.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The low power states 0∕1∕2 are added to the stm32l562e_dk board
with default min residency values.
The substate-id is mapping the same Zephyr power state.
They correspond to the stm32l562 low power stop0/1/2 modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch introduces the support of the LowPower Timer
for the STM32l562ze disco kit (sec. and non-sec. version)
LSE clock is selected as LPTIM clock source on this board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The low power modes are available on the stm32l5 soc
with the mcu STOP0/1/2 modes, depending on the CONFIG_PM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch introduces the support of the Low Power Timer
for the STM32L5xx from STMicroelectronics.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The low power states 0∕1∕2 are added to the stm32l4.
The substate-id is mapping the same Zephyr power state.
They correspond to the stm32l4 low power stop0/1/2 modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The low power states 0∕1∕2 are added to the stm32l476rg
nucleo board, with default min residency values.
The substate-id is mapping the same Zephyr power state.
They correspond to the stm32l476 low power stop0/1/2 modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This new release adds support for diffs as well as being able to list
added and removed projects.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As of today the build-only testing in upstream is enabled for
nsim_em and nsim_em7d_v22 which are very similar from the
compiler POW. The ARC HS, ARC Secure EM and SMP targets miss
any testing.
So adjust default testing for better coverage by enabling
build-only testing for nsim_hs, nsim_sem and nsim_hs_smp and drop
excessive testing for nsim_em7d_v22.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Enabling I2C support for Nucleo-F207zg in device tree.
This has been tested with mpu6050 sample application on I2C-1.
Documentation has been updated.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling I2C-1,2,3 support for STM32F2 platforms in dtsi.
This has been tested with mpu6050 sample application on I2C-1.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
In the file gatt.c, GAP service contains the Device Name
characteristic. If writable, authentication and authorization may
be defined by a higher layer specification.It means that GATT
clients can write to device name GAP characteristic without
bonding. So we add a configuration for writable name without
bonding.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
bt_le_oob_set_legacy_tk is not defined with this
setting and this code is reachable only for legacy pairing
signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Adds a check for the BT_LE_FEAT_BIT_PER_ADV bit for each
function related to periodic advertising, including sync and
PAST transfer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When compiling TF-M with profile_medium, disable the support
for Audit Log due to an upstream bug.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Prevent a thread from being preempted, while executing a Secure
function. This is required to prevent system crashes that could
occur if a thead context switch is triggered in the middle of a
Secure call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
To allow using TFM NS interface without enabling
CMSIS_RTOS V2 support. And to allow using TFM NS
code that uses logging.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The TF-M NS interface needs to be initialized before
it is used. We add an initialization function that
calls tfm_ns_interface_init(), at boot time, so then
we can use TF-M interface calls (veneers).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARM Non-Secure builds with TF-M it is not, generally,
possible to issue system reset requests from Non-Secure
domain. When the Platform SPM Partition is enabled, the
tfm_platform_system_reset(.) API can be used to request
system resets from TF-M. This commit overrides the weak
sys_arch_reboot() implementation in scb.c so Non-Secure
code is able to issue system resets.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Instruct CMake to include interface libraries when
building a Non-Secure ARM target with TF-M. In
particular, include the reboot.c source file, which
overrides the sys_arch_reboot implementation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Populates the onoff server stubs in the Bluetooth Mesh sample, and
implements generic LED based hardware support to include more boards.
Fixes#31031.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
XCC (which is based on GCC 4.2) needs the initializer of
one of the union elements to be enclosed in brackets.
So add them.
Fixes#33549
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There was a linker script change the broke the sorting such that
priority 2 and 20 would not necessary get sorted correctly. Modify
the test to try and catch any such issues in the future.
We modify the DEVICE_DEFINE of the larger priority first, so if the
linker isn't sorting it would get linked first in theory, and we also
tweak the priority value from 4 to 20 so if we aren't sorting correctly
between 2 and 20 we'll catch that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As per the agreements in the Process Group Meeting, rework the procedure
to include external code so that it reflects the reality of Zehyr today
with the choice between modules and integration into the main tree, and
decouple the non-Apache v2.0 license side of the question from the
process from importing 3rd-party code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
disk/disk_access.h got moved, but there is no compat warning.
Add that so users know they need to update code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Before this fix the board init function were called too early, before
the gpio driver was initialized. Because of the the board controller
for the serial port was not enabled properly.
This commit fixes this issue.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Hex firmware file is flashed by default if JLink is used. Since all
of the SiLabs dev boards have an on-board JLink, enable generating hex
file.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Add test to check if uart_irq_is_pending() correctly returns 0 (meaning
there are no more RX and TX pending interrupts) when all RX and TX data
is processed.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Currently CMSDK uart_irq_is_pending does not use RX and TX interrupt
bits found in INTSTATUS register to check for pending interrutps but
rather it checks for pending interrupts indirectly by checking if RX and
TX buffers are, respectively, full and empty, i.e. it checks bits 0 and
1 in STATE register instead of bits meant for interrupt status found in
INTSTATUS register.
That is particularly problematic because although a RX interrupt implies
a RX buffer full and a TX interrupt implies a TX buffer empty, the
converse is not true. For instance, a TX buffer might be empty for all
data was processed (sent to serial line) already and no further data was
pushed into TX buffer so it remained empty, without generating any
additional TX interrupt. In that case the current uart_irq_is_pending
implementation reports that there are pending interrupts because of the
following logic:
/* Return true if rx buffer full or tx buffer empty */
return (UART_STRUCT(dev)->state & (UART_RX_BF | UART_TX_BF))
!= UART_TX_BF;
which will return 1 (true) if STATE[0] = 0 (TX buffer is empty), since
UART_TX_BF = 1, so STATE[0] != UART_TX_BF, which is true (assuming here
for the sake of simplicity that UART_RX_BF = 0, i.e. RX buffer is empty
too).
One of the common uses of uart_irq_is_pending is in ISR in contructs
like the following:
while (uart_irq_update(dev) && uart_irq_is_pending(dev)) {
if (uart_irq_rx_ready(dev) == 0) { // RX buffer is empty
continue;
}
// RX buffer is full, process RX data
}
So the ISR can be called due to a RX interrupt. Upon finishing
processing the RX data uart_irq_is_pending is called to check for any
pending IRQs and if it happens that TX buffer is empty (like in the case
that TX interrupt is totally disabled) execution gets stuck in the while
loop because TX buffer will never transition to full again, i.e. it will
never have a chance to have STATE[0] = 1, so STATE[0] != UART_TX_BF is
always true.
This commit fixes that undesirable and problematic behavior by making
uart_irq_is_pending use the proper bits in the interrupt status register
(INTSTATUS) to determine if there is indeed any pending interrupts.
That, on the other hand, requires that the pending interrupt flags are
not clearly automatically when calling the ISR, otherwise
uart_irq_is_pending() will return immediatly false on the first call
without any data being really processed inside the ISR. Thus, because
both RX and TX buffer (FIFO) are only 1 byte long, that commit clears
the proper interrupts flags precisely when data is processed (fifo_read
and fifo_fill) or when the interrupts are disabled (irq_rx_disable and
irq_tx_disable).
Finally, that commits also takes the chance to update some comments,
specially regarding the need to "prime" when enabling the TX interrupts
(in uart_cmsdk_apb_irq_tx_enable()). The need to "prime" can be verified
in the CMSDK UART reference implementation in Verilog mentioned in the
"Arm Cortex-M System Design Kit" [0], on p. 4-8, section 4.3,
in cmsdk_apb_uart.v. In that implementation it's also possible to verify
that the FIFO is only 1 byte long, justifying the semantics that if
buffers are not full (STATE[0] or STATE[1] = 0) they are _completly_
empty, holding no data at all.
[0] https://documentation-service.arm.com/static/5e8f1c777100066a414f770b
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
* Removed leading 0 from slot0_partition starting offset
* Fixed slot1_partition starting offset
This fixes the following warnings:
nucleo_g0b1re.dts.pre.tmp:1749.36-1752.5: Warning
(unit_address_format):
/soc/flash-controller@40022000/flash@8000000/partitions/
partition@0C000:unit name should not have leading 0s
warning: unit address and first address in 'reg' (0x3e000) don't match
for /soc/flash-controller@40022000/flash@8000000/partitions/
partition@31000
Signed-off-by: Raúl Sánchez Siles <rsanchezs@k-lagan.com>
The "spi-max-frequency" property already exists, but was unused. This
now sets the SPI clock frequency to this value (limited to 24MHz) once
initialisation is complete.
Due to the nature of the SPI API, it is necessary to have two separate
configuration structures to switch clock speed as some SPI drivers only
compare pointers to detect changes.
Fixes: #32996
Signed-off-by: Rich Barlow <rich@bennellick.com>
Enabling DAC support for STM32 nucleo_f429zi in device tree.
Documentation has been updated.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
With this change, L2CAP/LE/CFC/BV-06-C can be supported when using
BT_RPMSG and the others HCI transports.
Depending on CONFIG_BT_HCI_RESERVE, the HCI transport requires extra
headroom in a BT buffer.
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
This commit enables test_spi_loopback sample application for
Nucleo_F207zg. test_spi_loopback was executed under the following case
sceanarios on SPI-1:
a. With DMA
b. No DMA - No Interrrupts
c. No DMA - Interrupts Enabled
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling SPI support for Nucleo-F207zg in device tree.
This has been tested with test_spi_loopback on SPI-1.
Documentation has been updated.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling SPI support for STM32F2 platforms in dtsi.
This has been tested with test_spi_loopback on SPI-1.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Now that we can use the adafruit_2_8_tft_touch_v2 shield with
mimxrt685_evk_cm33 and frdm_k64f boards, start building the display
driver and lvgl samples for these boards in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Configures the pinmux for the Arduino D9 pin to allow using it as a
gpio. This is needed by the adafruit_2_8_tft_touch_v2 shield for
cmd-data-gpios.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds Arduino header pin mappings to the mimxrt685_evk board to enable
using it with the adafruit_2_8_tft_touch_v2 shield and lvgl sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In acda9bf9ce new macros were introduced to support a virtual memory
map. Adjust these macros also for AArch64. This also fixes a problem
when building Zephyr when CONFIG_KERNEL_VM_BASE is not the same as
CONFIG_SRAM_BASE_ADDRESS
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
hwinfo_get_define_id returns and ssize_t with the size og the copied
id in case of success or negative value otherwise.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
hwinfo_get_define_id returns and ssize_t. Positive value with the
size of the copied id in success or a negative value in case
of error.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This CL introduces the implementation of configurating PSL input pads
and setting PSL_OUT to inactive level for ultra-low power consumption.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces the Power Switch Logic (PSL) pads which detect the
wake-up events and turn on/off core power supply (VCC1) for ultra-low
-power consumption in npcx device-tree file.
By adding PSL input-pad objects, psl_in1, psl_in2, and so on, into
'psl-in-pads' property and configuring their 'flag' properties, the
related driver will configure them via soc specific functions later.
For example, if PSL input 1 pad that is plan to detect a 'falling edge'
event, this property should be:
vsby-psl-in-list {
psl-in-pads = <&psl_in1>;
};
And the flag property in psl_in1 should change to
&psl_in1 {
flag = <NPCX_PSL_FALLING_EDGE>;
};
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Update the backport action to 1.1.1-1, which adds support for issue
creation when a backport fails.
In our case, label the issue with the "backport" and "bug" labels.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
PWR clock is required for various operations.
It is enabled by default in clock control driver,
but disabled at clock init.
It appears soc init is run after clock control driver init
and hence PWR is disabled to to this piece of code at
soc init level.
Don't disable PWR here.
(But keep PWR clock enable in case of ...).
A whole clock clean up will be required later on,
but waiting for that to happen, this is the safest we can do.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Rename lib.
Disable AUDIT_LOG in regression sample because of a bug upstream.
Update stm32l562e_dk_ns overlay.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Before this change, the sw reset did not work after power-on, because
I2C commands are only accepted after 20msec (t_START after power-on).
Now the 20msec delay is moved before performing the reset to ensure that
the SW reset command can be executed. An additional 2msec delay is added
after the reset (see datasheet t_START after reset).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Commit 0a7b65e tweaked the CREATE_OBJ_LEVEL macro in such a way
that it would break the expected sorting order.
For example if you had 2, 19, 20, 30 as the level, we'd end up sort
these to be 19, 2, 20, 30.
Fix this by adding aditional "_" symbol after the init level counter.
That allows to keep correct sort order (for both GNU and MWDT
toolchains) and distinguish init level counter from section suffix
(for MWDT toolchain).
Fixes zephyrproject-rtos#33464
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The fatal log now contains
- Trap type in human readable representation
- Integer registers visible to the program when trap was taken
- Special register values such as PC and PSR
- Backtrace with PC and SP
If CONFIG_EXTRA_EXCEPTION_INFO is enabled, then all the above is
logged. If not, only the special registers are logged.
The format is inspired by the GRMON debug monitor and TSIM simulator.
A quick guide on how to use the values is in fatal.c.
It now looks like this:
E: tt = 0x02, illegal_instruction
E:
E: INS LOCALS OUTS GLOBALS
E: 0: 00000000 f3900fc0 40007c50 00000000
E: 1: 00000000 40004bf0 40008d30 40008c00
E: 2: 00000000 40004bf4 40008000 00000003
E: 3: 40009158 00000000 40009000 00000002
E: 4: 40008fa8 40003c00 40008fa8 00000008
E: 5: 40009000 f3400fc0 00000000 00000080
E: 6: 4000a1f8 40000050 4000a190 00000000
E: 7: 40002308 00000000 40001fb8 000000c1
E:
E: psr: f30000c7 wim: 00000008 tbr: 40000020 y: 00000000
E: pc: 4000a1f4 npc: 4000a1f8
E:
E: pc sp
E: #0 4000a1f4 4000a190
E: #1 40002308 4000a1f8
E: #2 40003b24 4000a258
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Introduce a new software trap 15 which is generated by the
ARCH_EXCEPT() function macro.
The handler for this software trap calls z_sparc_fatal_error() and
finally z_fatal_error() with "reason" and ESF as arguments.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Unexpected software traps ("ta" instruction) are now handled by the
fatal exception handler and eventually end up in z_fatal_error().
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Changed chan type to int in the test_timeout function which follows
change in the api to always use int for channel parameter.
Added assert to check that channel was successfully allocated in
test_resetting_cc().
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There was an inconsistency in the API as z_nrf_rtc_timer_chan_alloc
returned int but other function were using uint32_t for channel
argument. Updated api to use int32_t everywhere.
Update nrf_802154 driver which was using this api to use int32_t.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Make sure that child bindings with their own compatibles are treated
as first-class bindings. Do this by making sure that nodes whose
bindings are defined via 'child-binding:' are picked up as bus nodes,
instead of a parent bus node of the same type.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Whenever a child-binding: dict has a compatible, we ought to make
that available in EDT._compat2binding. If we don't, we can't look it
up later.
This has adverse effects like missing child bindings which describe
buses.
Fixes: #32071
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The bit RCC_MC_APB3ENSETR_PMBCTRL and RCC_MC_AHB5ENSETR_AXIMC
does not exist in the stm32mp1xx ref manual anymore.
They are not present in the stm32mp1xx_ll_bus.h (v1.4.0).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In order to develop further functionality in the action-manifest repo,
pin the version to v1.0.0 here.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch replaces ENOSYS into ENOTSUP to keep consistency with
the return value specification of k_float_enable().
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This patch introduce new API to enable FPU of thread. This is pair of
existed k_float_disable() API. And also add empty arch_float_enable()
into each architectures that have arch_float_disable(). The arc and
riscv already implemented arch_float_enable() so I do not touch
these implementations.
Motivation: Current Zephyr implementation does not allow to use FPU
on main and other system threads like as work queue. Users need to
create an other thread with K_FP_REGS for floating point programs.
Users can use FPU more easily if they can enable FPU on running
threads.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
This config CPU_CORTEX_M_HAS_DWT, is to avoid the
pragma message "Null-Pointer exception detection cannot
be configured on un-mapped flash areas"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This change is needed to correctly generate the devicetree headers
for use in other drivers (ie SSD1306).
Signed-off-by: Jeremy Herbert <jeremy.006@gmail.com>
Currently the python script is assuming we only have objects on 32-bit
addresses. This is obviously wrong for 64-bit platforms. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add error condition to test pthread. Like use pthread with
uninitialize stack or stack size is 0, and verify the result
is as expected.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Add dmamux1 dts bindings for stm32h7
series. Note that there is no dedicated
clock to enable for dmamux1 so we set the
clock of dma1. This is the way linux handle
this.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Fix the clocks bindings of dma1 and dma2
for stm32h7 series. This is wrong probably
due to copy and paste.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Work around the fact that llvm objcopy does not support --gap-fill right
now. This should be done on the toolchain level at some point, it is
currently not possible however.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This symbol is reserved and usage of reserved symbols violates the
coding guidelines. (MISRA 21.2)
NAME
signal - ANSI C signal handling
SYNOPSIS
#include <signal.h>
sighandler_t signal(int signum, sighandler_t handler);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This symbol is reserved and usage of reserved symbols violates the
coding guidelines. (MISRA 21.2)
NAME
exp, expf, expl - base-e exponential function
SYNOPSIS
#include <math.h>
double exp(double x);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This symbol is reserved and usage of reserved symbols violates the
coding guidelines. (MISRA 21.2)
NAME
fgetpos, fseek, fsetpos, ftell, rewind - reposition a stream
SYNOPSIS
#include <stdio.h>
void rewind(FILE *stream);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This symbol is reserved and usage of reserved symbols violates the
coding guidelines. (MISRA 21.2)
NAME
fgetpos, fseek, fsetpos, ftell, rewind - reposition a stream
SYNOPSIS
#include <stdio.h>
void rewind(FILE *stream);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This symbol is reserved and usage of reserved symbols violates the
coding guidelines. (MISRA 21.2)
NAME
remove - remove a file or directory
SYNOPSIS
#include <stdio.h>
int remove(const char *pathname);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix undefined reference to bt_key_foreach when BT_LOG_SNIFFER_INFO has
been enabled but BT_SMP is not enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We are setting CONFIG_GEN_PRIV_STACKS when AArch64 actually uses a
statically allocated privileged stack.
This error was not captured by the tests because we only verify whether
a read/write to a privileged stack is failing, but it can fail for a lot
of reasons including when the pointer to the privileged stack is not
initialized at all, like in this case.
With this patch we deselect CONFIG_GEN_PRIV_STACKS and we fix the
mem_protect/userspace test to correctly probe the privileged stack.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
* Rename CPU_ARCV2 to ISA_ARCV2. That helps to avoid conflict between
CPU families naming and ISAs naming and aligns this options
with other ARC OSS projects.
* Generalize ARCV2 check to ARC check where it is required.
NOTE: we add ISA_ARCV2 option in a choice list as a preparation
for ISA_ARCV3 addition.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Don't allow user to choose CPU_ARCEM / CPU_ARCHS options
but select them when exact CPU type (i.e. EM4 / EM6 / HS3X/ etc)
is chosen.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The quirky behavior when accessing of 0x0 address is related to
exact ARC SoCs/boards and not to entire ARC EM CPUs family. So
check for exact SoCs configs (CONFIG_SOC_ARC_IOT and CONFIG_SOC_NSIM)
instead of checking against CONFIG_CPU_ARCEM.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
shell_uart_release command shows how shell can be uninitialized and
release transport resources (uart) and reinitialized at runtime.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Init function can be called multiple times (after each shell
reinitialization). It was missing reseting ring buffers and tx_busy
flag. When called once proper state of those variable where handled
by ram sections initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell uninitialization is not synchronous, it is deferred to shell
thread so resources used by the shell (e.g. transport resource like
uart) cannot be used until it is completed. Added callback which
notifies when all resources are released and shell is uninitialized.
Callback is called from shell thread just before it is aborted.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The bootutil_public.h, as a part of mcuboot interface, has been
providing the same definitions as mcuboot_priv.h
The commit removed the redundancy.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In modes where string duplication is not used, the code is
still compiled. On some compilers it was failing due to calling
strncpy which will do nothing because n is 0. Increase
CONFIG_LOG_STRDUP_MAX_STRING to 2 to ensure that n is 1 in that
case
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use ep_idx in usbip_send_common() instead of endpoint address
and get direction from endpoint address.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB setup packet is a part of USBIP_CMD_SUBMIT, but missing
in struct usbip_submit. This patch fixes it and removes
usbip_skip_setup() and adds an additional integrity check
in handle_usb_control().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The transfer length is not stored and processed properly.
Use struct usb_ep_ctrl_prv, which we already have, to store
the transfer length and data. Move usbip_recv() to
handle_usb_control() and handle_usb_data(),
and explicitly copy USB setup packet.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Call the IN callback only if data in usb_dc_ep_write()
is actually written to the intermediate buffer and sent.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use pointer to struct usb_ep_ctrl_prv, which allows to remove
a few variables and simplifies subsequent improvements.
Use consistently ep_idx in handle_usb_control() instead of
ntohl(hdr->common.ep).
Revise logging so that it is clearer what event is being processed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the change to DTS driven clock divider values wrong values
were used in the dts file.
Fixes: #33559
Signed-off-by: David Leach <david.leach@nxp.com>
Coverity complains about unchecked return value for `k_sem_take` which
is called with `K_FOREVER` and thus cannot expire/timeout. Explicity
ingore the return value to silence Coverity.
CID: 219676
Fixes#33019
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Using the new obscured user shell input feature,
provide examples of using it in login and logout commands.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
When building the test for Cortex-M, use an undefined
instruction to trigger a CPU fault, instead of null
pointer de-referencing. That's because null-pointer
access may, in TrustZone-enabled platforms, lead to
a system crash (due to security violation).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix bluetooth audio compilation issue when BT_AUDIO is enabled but
no Bluetooth host services has been enabled.
This leads to an empty library file.
Instead of creating a new library for audio add the sources to the
parent library, similar to how bluetooth services are added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
VOCS does not support the write long procedure, and thus
should not accept any offset in write requests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds bt_conn_iso function to safely access the struct bt_conn_iso
within a bt_conn.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel direction was actually a source of confusion since the spec does
actually define the data path direction from controller point of view
meaning input actually means transmit and output receive, also direction
can be configured with different QoS settings.
To make these APIs less confusing and allow QoS to be configured
independently they are now split into RX (receiving) and TX
(transmission) settings including its data path.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CHECKIF is preferred as it handles full runtime error handling in
addition to just asserts.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bt_iso_cleanup when there are still channels bound to the
ACL connection.
On top of it introduce bt_iso_chan_unbind which can be used to unbind
channels and thus release the reference to the ACL connection if that
has not been disconnected in which case the channels are unbind
automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the channel has just been bound but is not connected yet there is
no need to send any command over the air but the disconnected callback
shall still be called in order to notify the channel owner that it has
reached disconnected state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When initiating a disconnection conn_disconnect would be called to send
HCI_Disconnect but the controller may be quick enough to send Disconnect
Complete event before setting BT_CONN_DISCONNECT which will then cause
the invalid transition from BT_CONN_DISCONNECTED to BT_CONN_DISCONNECT
and the connection won't be freed properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes a regression introduced by 4350021f09 which prevents
references to be properly release when there is an ISO connection.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Several wifi drivers add some form of zephyr_include_directories(.)
which isn't needed since the headers in the specific driver dir get
included via #include "foo.h". So we can remove any uses of
zephyr_include_directories(.)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial board support for the MPS3 AN547. The board support is
based on the MPS2+ AN521 board support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The AN547 is a Soft Macro Model implementation of the SSE-300 subsystem
with Ethos-U55 and Cortex-M55 components targeting the MPS3 board.
The SoC support is based on the AN521 MPS2+ support that already exists
in Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial support for the Cortex-M55 Core which is an implementation
of the Armv8.1-M mainline architecture and includes support for the
M‑profile Vector Extension (MVE).
The support is based on the Cortex-M33 support that already exists in
Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
net_eth_carrier_on() and net_eth_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
While at it, save network interface pointer during ethernet context
initialization, so that is becomes static (and thread-safe) during whole
ethernet context lifetime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net_ppp_carrier_on() and net_ppp_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Since recent developments, CORTEX_M_SYSTICK should not be forced
on STM32L5 targets as this conflicts with optional LPTIM selection
as kernel tick source.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
MWDT toolchain adds additional suffix to sections name
in case of ffunction-sections / fdata-sections are enabled.
Let's pick a single set of rules and syntax that work.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
New macro GROUP_ROM_LINK_IN for text/rodata sections
New macro GROUP_NOLOAD_LINK_IN for bss/noinit sections
GROUP_FOLLOWS_AT is unused anywhere in the kernel for
years now and has been removed.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
both thread monitor and thread names are not EXPERIMENTAL any more. They
have been used across the tree and lots depend on those features
already.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch removes sdhc_api references since such API
does not actually exist. SD card controller drivers
use disc driver interface. Accordingly, the SDHC documentation,
which actually describes how to connect a SD card via SPI
and has little to do with SD host controller (SDHC),
is also moved to disk access page and adapted.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move disk driver interface to own header and
separate disk access interface and disk driver interface.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add common SDMMC_LOG_LEVEL and SDMMC_VOLUME_NAME.
Initialize drivers at POST_KERNEL level.
Update CODEOWNERS after sdmmc drivers relocation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The files disk_access_usdhc.c, disk_access_spi_sdhc.c,
disk_access_stm32_sdmmc.c, disk_access_ram.c and
disk_access_flash.c are actually drivers for block devices and SD/MMC
controllers. This patch moves this drivers to drivers/disk and
reworks the configuration so that the drivers are selected when
the corresponding node is enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Resolution currently only gets set if CONFIG_MCP9808_TRIGGER is also
set. If CONFIG_MCP9808_TRIGGER is not set, resolution gets not to '0'.
This small bug fix moves resolution to before CONFIG_MCP9808_TRIGGER is
checked, so that the resolution is changed as required.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
The BQ274XX driver init function performs a lot i2c transfers
that slow down booting the system. We can do this lazely on the
first sample request to speed up the boot.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Fix#32938 [Coverity CID :219508] "Unchecked return value in
lib/libc/minimal/source/stdlib/malloc.c"
The Coverity complains about sys_mutex_lock() which returns 0 if
locked. I added also the same check on returned value for
sys_mutex_unlock() which returns 0 if unlocked.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Fixes: #33512
The ${ZEPHYR_FINAL_EXECUTABLE}.map file is being renamed at a later
stage.
The renamed, and thus missing file, causes ninja to relink the target
in order to re-create the map file, which then again is renamed.
This is fixed by removing the ${ZEPHYR_FINAL_EXECUTABLE}.map as a
byproduct and only has the byproduct on the renamed file to ensure
proper cleanup, see: #23449.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Without this fix, ztest_set_assert_valid() can only be used when
CONFIG_ZTEST_FATAL_HOOK is set.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add exception descriptions of mcause id 6~15. Also print mtval CSR for
memory access fault & illegal instruction exceptions.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Add @evgeniy-paltsev as an ARC part owner in addition to
@abrodkin and @ruuddw, so he will be chosen as a reviewer
automatically.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since linker_final_pass.cmd is the actual linker script being
used to link the final Zephyr binary, rename it to linker.cmd.
This also renames LINKER_PASS2 to LINKER_ZEPHYR_FINAL simply
to clarify what it is used for, instead of ambiguous pass #n.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The linker script 'linker.cmd' is actually being used for
building zephyr_prebuilt.elf and is not the one used to
build the final binary. So rename it to better reflect
what it is used for.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using this actually would result in a linker input section being
put between output sections which is not correct syntax.
We have never seen this simply because the generated ones would
be included instead of the in-tree ones. So remove this just in
case, instead of linker errors.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the variables related to the generation of kernel
object hashes, and simply makes them more descriptive.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
List all supported device IDs found in External Design Specification
Volume 1 which have IBECC supported.
Fixes#33543
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added recovery for case when log file was lost somehow.
Back-end will try to create new file if possible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
New backend is based on littleFS. After init, there is created new file
with continuous numeration. When max size of file is reached, system
creates another one. File size is limited by Kconfig option.
There is possibility to overwrite old files or drop new ones.
FS backend logging to file if the FS location is available.
Otherwise log messages are drooped.
User can also change the name of log files.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <Andrzej.Puzdrowski@nordicsemi.no>
Add information about power state constraints and more information
about power management policy.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Create a separate sub group for constraint APIs. This way it is
possible to reference this api directly in the power management
reference without mess with the rest of the documentation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Currently notification about exiting an idle state is sent before
post_ops and with interruptions locked. Change it to be sent after
exit_pos_ops callback be called.
Unfortunately it is not possible to just change the order these
functions are called since the idle thread can be scheduled out just
after irqs be unlocked and before has the chance to send the
notification, so we are locking the scheduler and unlocking it only
after the notification be sent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The kernel expects irqs be unlocked after this function be called.
Add it to the weak function in case of the SoC or application has not
implemented it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Put documentation about pm_power_state_set in the proper group,
power_management_hook_interface.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Allow callers to wait for an arbitrary amount of time, instead of always
waiting for a compile-time fixed period.
Signed-off-by: Josh Gao <josh@jmgao.dev>
Removed k_pipe_block_put and static functions only related to it.
After all the old usage of k_mem_block has been replaced by k_heap,
k_pipe_block_put still taking a deprecated k_mem_block as argument
becomes dead code. All APIs that hook it from kernel.h have been
confirmed to be removed. Since an asynchronous message descriptor
is only allocated in k_pipe_block_put, static functions for pipe_
async are removed as well.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
This document will show up when a viewer selects the "Security" tab, and
selects the "Security Policy". It has a brief introduction, and directs
to the official documentation of the security policy.
Signed-off-by: David Brown <david.brown@linaro.org>
UARTs in Nordic devices only support a specified list of baud rates.
Choosing a different baud rate without this patch will cause a runtime
error, whereas with the constraint, this mistake is already found in
dts construction with a useful error message.
Signed-off-by: Peter Niebert <peter.niebert@univ-amu.fr>
Add some error test cases for userspace of memory protection module.
This increase the code coverage of testing.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
This patch adds a new sample application demonstrating basic
usage of FT800 display controller including touchscreen events.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
This patch includes initial support for FT800 display driver.
It includes basic features. It can be easily extended with more
FT800 display list and co-processor features.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This feature predated the tickless kernel and has been in legacy mode
for a while. We now have no drivers or systems that do not support
tickless, so remove this option and cleanup the code to only use
tickless.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let the core call the modbus_tx_adu() to make
the process more comprehensible.
Move tx-wait-for-rx handling outside of client code.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Prefix internal functions and structs with modbus_.
Use unit_id consistently instead of node_addr.
Fix mbm_ remainder and rename to mbc_.
Rename struct modbus_frame to modbus_adu since
ADU is closer to what the structure represents.
Let the compiler/linker do the job and
remove ifdef around mbc_validate_fc03fp_response().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get Modbus RTU interface index according
to interface name. This can be used to clearly identify
interfaces in the application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add support to control DE/nRE RS-485 transceiver signals
over GPIO pins. Useful if the UART controller does not
support RS-485 mode.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The test allow to test both server and client role
simultaneously. Currently only FRDM-K64F board supports
simultaneously server-client test.
To run the test on the board like reel board, where
only one UART interface is available, two device can be used.
One board has to be flashed with project that supports only
the server role and the other with the client role.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add MODBUS RTU (over serial line) subsystem.
MODBUS RTU implementation supports booth server and
client roles. Some components of the implementation are based
on the uC/Modbus stack, which was published under Apache license,
(https://github.com/SiliconLabs/uC-Modbus
fdd1218a28e313c1212fed5ed42e5c65d3056a2c).
Resolves: #2854
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The nrfjprog utility is not capable of flashing a hex file which
affects the flash memories of both coprocessors of the nRF53 family of
SoCs.
However, the user is capable of creating such a hex file using the
HEX_FILES_TO_MERGE build system variable.
An example use case is to build a bluetooth controller application for
the network core, then use the zephyr.hex file in that build directory
as the HEX_FILES_TO_MERGE argument for a separate Bluetooth
application build targeting the app core.
Work around this by detecting the situation and doing the right thing
by splitting the hex file back up again, even if thats a bit awkward.
Splitting the hex into app and network core components allows them to
be flashed separately. This is the only way we can get the job done
with nrfjprog.
This is arguably nicer since there's just one 'west flash' invocation.
At least in the use case named above, you wouldn't need to rebuild the
controller application very often, so this is a simpler user workflow.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The SD Card Physical Layer specification states in Table 7-1
(in section 7.3.1.1) that the LSB of the 48 bit command must
be set to 1 to act as an 'end bit'.
Fixes#33479
Signed-off-by: Rich Barlow <rich@bennellick.com>
Kconfig option USB_HID_PROTOCOL_CODE does not allow to set
boot interface protocol code for specific HID device but
only to set the same value for all device.
Add new API function to allow the application to set
Protocol Code per device. Deprecate USB_HID_PROTOCOL_CODE option.
Fixes: #32778
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The pointer to interface descriptor in struct usb_cfg_data
is used to access and modify the descriptor at runtime.
Remove const qualifier and thus avoid unnecessary casts.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Increase BD buffers from 7 to 9 to handle 1024 block
counts having mega/normal src,dst bd combinations in one request.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Sync packet is always CARD to HOST and if it's combined with HOST
to CARD transfers in one single RM header packet, it's not allowed
due to RM implementation constraints. RM implementation allows same
type of data transfer direction in all the BD's populated under one
header BD.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Adds Friendship tests to the Bluetooth Mesh BabbleSim test suite. The
friendship tests cover all basic friend establishment and message
sending scenarios, including coverage for previous regressions, such
as #29544, #32033 and #30657.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Remove support for counter_read and counter_get_max_relative_alarm as
they have been deprecated for at least 2 releases. As part of the
removal of counter_get_max_relative_alarm remove the code in all
counter drivers that implemented the API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
GCC10 introduced by default calls to out-of-line helpers to implement
atomic operations with the '-moutline-atomic' option. This is breaking
several tests because the embedded calls are trying to access the
zephyr_data region from userspace that is declared as MT_P_RW_U_NA,
triggering a memory fault.
Since there is currently no support for MT_P_RW_U_RO (and probably never
will be), disable the out-of-line helpers disabling the GCC option.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
It is apparently possible for one CPU to change the memory domain
of a thread already being executed on another CPU.
All CPUs must ensure they're using the appropriate mapping after a
thread is newly added to a domain.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce the necessary routines to have the user thread stack correctly
mapped and the functions to swap page tables on context switch.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The size_t usage, especially in struct z_heap_bucket made the heap
header almost 2x bigger than it needs to be on 64-bit systems.
This prompted me to clean up our type usage to make the code more
efficient and easier to understand. From now on:
- chunkid_t is for absolute chunk position measured in chunk units
- chunksz_t is for chunk sizes measured in chunk units
- size_t is for buffer sizes measured in bytes
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The end marker chunk was represented by the len field of struct z_heap.
It is now renamed to end_chunk to make it more obvious what it is.
And while at it...
Given that it is used in size_too_big() to cap the allocation size
already, we no longer need to test the bucket index against the
biggest index possible derived from end_chunk in alloc_chunk(). The
corresponding bucket_idx() call is relatively expensive on some
architectures so avoiding it (turning it into a CHECK() instead) is
a good thing.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Sparc architecture is strange. Va_list arguments are packed (1 byte
alignment) while unaligned access fails. Added dedicated handling of
Z_CBPRINTF_STORE_ARG which is copying the data word by word.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added missing errno.h include. Fixed Z_CBPRINTF_ARG_SIZE macro for
void * and cleaned up macro description.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit removes the signing commands from the post build steps,
in order to leverage the consolidated TFM signing code.
Also with the support to adjust the hex base address when signing,
there is no need to run the TFM_UPDATE.sh script. We can use west
flash to flash the merged hex file on the board.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
This commit enables the TF-M IPC sample application on stm32l562e_dk
board.
It provides device tree flash partition as an overlay in order to
configure and flash the bl2, secure/non secure firmwares.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
After TZ is enabled, the GPIO peripherals are secured and are
not accessible from non secure world.
This commit prevents the GPIO pinctrl from the non secure target
for stm32l562e_dk board.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
This commit adds a second target for the stm32l562e_dk board.
The non secure target can be configured for TFM IPC application.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
This commit allows to append an optional --hex-addr argument to
the wrapper script if speficied. This can adjust the base address
of the output hex file when signing the non-secure or secure
firmware images.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
GPIO driver properly disconnects a pin. On subsequent pin
configure calls the driver does not clear the GPIO pin's
power gate field resulting in the pin remaining disconnected.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Added test_pipe_get_large to cover branches in both k_pipe_put and
k_pipe_get. Added trivial testcases in test_pipe_avail_no_buffer to
cover trivial branches for k_pipe_read_avail and k_pipe_write_avail.
This is the second patch as the continuation of #31037.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
Fix control Tx buffer leak into data Tx pool that happens
after a cross-over control procedure response was paused due
to currently active encryption setup procedure, and a new
control Tx PDU in addition to the paused one is enqueued
thereafter.
When the control tx PDUs is resumed but not yet enqueued
towards the radio, if there is a new control Tx PDU enqueued
then the paused control Tx PDU is not set as the head of the
control PDUs in the Tx queue. This caused the paused control
Tx PDU to be associated with data Tx pool, hence causing the
incorrect release into data Tx pool.
Relates to the commit bff76b4cce ("Bluetooth: controller:
split: Fix control tx queue handling") and to the
commit 6991d09977 ("Bluetooth: controller: Fix control tx
queue handling").
Fixes#32898.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The only user of arch_mem_domain_destroy was the deprecated
k_mem_domain_destroy function which has now been removed. So remove
arch_mem_domain_destroy as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove the redundant connection initiated check as the event
is closed on connection initiated and it is sufficient to
check in the prepare_cb function to abort any events in the
pipeline after the connection has been initiated.
Relates to commit 5ce5dc055e ("Bluetooth: controller:
Avoid race between ULL and LLL when initiating conn") and
commit 18f5fb99c1 ("Bluetooth: controller: Remove use of
lll_stop").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Function random_byte_get() returns only the least significant byte of
the 32-bit random datum, as this is the used value, so avoiding that
higher numbers are interpreted as negative error codes and their value
is not discarded.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Building this file with CONFIG_COVERAGE=y and CONFIG_SHELL_LOG_BACKEND=n
fails on the llvm-clang compiler. Swapping the IS_ENABLED and
log_backend allows the compiler to optimize out the if block even with
coverage enabled.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Use the channel identifier calculation function in the
central and peripheral implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added function to calculate channel identifier value
required for Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Mark all variants of the DT_DMAS_LABEL APIs:
* DT_DMAS_LABEL_BY_IDX
* DT_DMAS_LABEL_BY_NAME
* DT_INST_DMAS_LABEL_BY_IDX
* DT_INST_DMAS_LABEL_BY_NAME
As deprecated in favor of utilizing:
* DT_DMAS_CTLR_BY_IDX
* DT_DMAS_CTLR_BY_NAME
* DT_DMAS_CTLR
* DT_INST_DMAS_CTLR_BY_IDX
* DT_INST_DMAS_CTLR_BY_NAME
* DT_INST_DMAS_CTLR
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new revision fixes an issue with channel deallocation
in nrfx_gpiote initialization.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The LOG_MINIMAL option is no longer user-configurable, as now it has
no prompt. LOG_MODE_MINIMAL should be modified instead.
But in this case, the assignment is redundant, as this option is not
enabled by default. Remove it then, to align the configuration file
for nrf5340dk_nrf5340_cpuapp with the one for nrf52840dk_nrf52840.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
I won't be supporting Zephyr for the foreseeable future, so remove my
association with specific subsystems.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
I won't be supporting Zephyr for the foreseeable future, so remove my
association with specific subsystems.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Minor fixes to the sample output in the README file,
reflecting the correct error reason (3: oops) instead
of reason 0 (generic CPU error).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
test_catch_z_oops test case should not run in user mode,
since Z_OOPS needs to be called in supervisor mode, otherwise
we will be getting a reguser user memory access error that is
irrelevant to the test case (and simply is triggered by Z_OOPS
accessing the thread's syscall frame pointer).
In addition to that, we fix the argument of Z_OOPS, because, it
was triggering a null-pointer dereferencing, which results in an
error thrown before Z_OOPS is even executed (if null-pointer
exception is caught).
We also need to generate a dummy thread->syscall_frame, that
Z_OOPS implementation will access. We fix this to
_image_ram_start, because this memory is always part of the
image memory and is always available to supervisor mode. So,
accessing it won't trigger a security fault, for example.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enabling DAC support for STM32 nucleo_f767zi in device tree.
Documentation has been updated.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Fixes: #33138
Board alias and deprecated board handling is setting the BOARD variable
after zephyr_boilerplate_watch(BOARD) has been executed.
This results in the board changed warning.
This commit moves the zephyr_boilerplate_watch(BOARD) code below the
board alias and deprecation handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add simple application to demonstrate quadrature decoder sensor.
Tested on Atmel SMART SAM E70 Xplained board.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The payload of the Register/Register Update message is also formatted as
application/link-format. Therefore it's reasonable to reuse the new
content writer instead of filling the payload manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a new content writer, application/link-format, which
can be used during the Discovery procedure, to fill the content of the
response payload.
Introducing this new content writer, which encapsulates some of the
details like attribute handling which is different for bootstrap/regular
discovery, allows to unify the discovery handler in the lwm2m_engine,
thus it's no longer needed to have spearate handler functions for
bootstrap/regular discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`.well-known/core` resource is described by the CoAP RFC as an optional
method of resource discovery. The LwM2M specification though makes no
mentionon about this mechanism and provides an alternative method of
resource discovery instead (Device Management Discover, sec 5.4.2, and
Bootstrap Discovery, sec 5.2.7.3).
Since LwM2M does not require to implement `.well-known/core` resource
and it complicates the existing Discovery mechanism (and likely cause a
security concern) remove its handling from the LwM2M implementation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce LwM2M engine helper functions that allows to work with LwM2M
attributes outside of lwm2m_engine.c.
This is a groundwork for application/lwm2m-format content writer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds support for Silicon Labs BRD4255A (a.k.a. SLWRB4255A)
Flex Gecko Radio Board.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Update west.yml to point to hal_silabs version with support for Silicon
Labs EFR32FG13P SoCs.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Added back test_pipe_alloc because the z_thread_malloc called in the
API has been updated to use k_heap instead of k_mem_pool.
Adjusted test_resource_pool_auto_free by replacing z_mem_pool_malloc
with k_heap_alloc. Added new test_k_pipe_cleanup to cover one more
branch in k_pipe_cleanup. Modified test_half_pipe_put_get to cover
branches for (reader != NULL) in k_pipe_put. Added test
test_pipe_get_put to cover branches for (writer != NULL)
in k_pipe_get. Added trivial tests to cover input validity checks.
Line coverage has been improved by 52%, function cov by 56%, and
branch cov by 46%.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
In NPCX chips, System Configuration module can configure not only
pinctrl but also misc. functionality such as glue and flash write
protection. This change moves the scfg driver from the pinctrl folder
to soc/arm/nuvoton_npcx/common and renames it to avoid confusion.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Register T0CSR bit 4 is WDRST_STS which is used to check whether the
chip has watchdog reset from the last power-up or vcc1_rst. WDRST_STS
hardware is design to write one clear. For the original
read-modify-write, it will reset the WDRST_STS unexpected. Add a mask
to avoid it.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
In several test suites CONFIG_TEST was missing.
Define CONFIG_TEST=y, so testing-related Kconfig
options (depending on TEST) get switched-on.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that the security process has been moved to its own page, fix a
broken link that was to the current page.
Signed-off-by: David Brown <david.brown@linaro.org>
Create a new page containing just the information on reporting security
vulnerabilities, leaving a link behind in the old section. This will
make it easier to reference this document, rather than it being in the
midst of a larger document.
Signed-off-by: David Brown <david.brown@linaro.org>
There's no need to duplicate the linker section for each architecture.
Instead, move the section declaration to common-rom.ld.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The exported structures that were originally introduced for OpenOCD have
since then been reused for other debugger plugins, including PyOCD and
Segger J-Link.
Rename the Kconfig option and the implementation from openocd to debug
thread info, so that it reflects the fact that this is no longer
specifically tied to OpenOCD.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A bunch of commands were missing from the bitmap in the Read Local
Supported Commands response. Add them accordingly.
Fixes#33324.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Ignore connection indications from peers that are already
connected. This is to bring the behavior of the controller in
accordance with [5.2, Vol 6, Part B, 4.5 Connection state]:
"If an advertiser receives a connection request from an initiator it
is already connected to, it shall ignore that request."
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Rename the peer's address in the advertising set struct from `id_addr`
to `peer_addr` to clarify what the address refers to.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
This CL solves an interrupt storm caused by plenty of host access
messages when system is in S0. It only turns on the host access
interrupt before ec enters sleep and turns it off after leaving
sleep.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
-P is an option that was inherited from the old MetaWare compiler.
[ccac foo.c -P] is actually a shortcut for: [ccac -E foo.c -o foo.i].
In new version of mwdt, -P option can't redirect the output. we need
to use -E option, which works in all versions.
-P: Preprocess the file and write it to <src>.i (C) or
<src>.ii(C++). No compilation is performed.
-E: Run preprocessor only.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The function `handle()` from class `Test(Harness)` had most of its
code being the direct copy of the code from
`Harness.process_test(line)`. This patch replaces the copied code
with the call for `process_test(line)` and removes repetition of
this function call.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Remove k_mem_domain_destroy and k_mem_domain_remove_thread as they've
been deprecated for at least 2 releases now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When recvfrom() was called with src_addr != NULL, then source address
was fetched from beginning of net_pkt. This works with native IP stack
obviously. However with offloaded IP stack there is no IP header, so
trying to parse missing IP header results in undefined behavior.
Check if network interface has offloaded IP stack. If positive, then
figure out if there is assigned remote address to network context on
which packet was received. Return this remote address, which SHOULD be
the source address of received packet. Otherwise, return an error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Although a project's default revision is still "master", we can change
some examples around to refer to "main" branches instead, in keeping
with the changes we're making for Zephyr more generally.
We cannot change the default project revision away from "master" in
west v0.10.x, because that would be a schema change. That will have to
wait for v0.11.0.
However, in the meantime, we are making some inclusive language
changes related to 'west init', because the --mr option is not
governed by a schema. These will be documented in the next commit.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This should produce no changes in the docs since there are no API
changes in this point release, but let's just keep the build up to
date with the version being documented for cleanliness.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add privacy configuration to init test for both central and peripheral
roles with or without extended advertising.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix regression is central only builds when CONFIG_BT_PRIVACY and/or
CONFIG_BT_EXT_ADV is enabled, or the functions bt_id_reset or
bt_id_delete is called from application.
This resulted in build error for undefined functions
bt_le_ext_adv_foreach and bt_le_adv_lookup_legacy since the definition
for these functions are now only compiled in when CONFIG_BT_BROADCASTER
has been enabled.
Regression from:
53cea4719d
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CONFIG_BT_HCI_ACL_DATA_SIZE default value set to 0 when data length
feature in the controller is not enabled. In this case the default value
will be set to 0 which is outside of the range specified for the option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move access to volatile variable out of assertion to avoid warnings
about side effect in assertion.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Document that for any Bluetooth sample to work on the nRF5340 device,
the additional application for the nRF5340 network core is required:
hci_rpmsg.
Signed-off-by: Michał Grochala <michal.grochala@nordicsemi.no>
Add hci_driver.h to include files in id.c to ensure that prototype for
bt_read_static_addr is visible. This fixes builds that define
CONFIG_BT_CTLR but not CONFIG_BT_HCI_VS_EXT.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
This sample application periodically reads raw data from the FDC2X1X
sensor in polling mode or optionally with data ready trigger.
It is able to read the 12-Bit and 28-Bit, as well as the 2-Channel
and 4-Channel versions (FDC2112, FDC2114, FDC2212, FDC2214).
The 4-channel versions are chosen through devicetree properties.
The default is FDC2112.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
Adds support for the Texas Instruments FDC2X1X Capacitance-to-Digital
Converter for Proximity and Level Sensing Applications.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
HID report descriptor in the sample has unnecessarily output report
which is not used anywhere. This patch removes unnecessary report.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HID sample has on_idle callback implementation present in the code,
but has not turned on USB_DEVICE_SOF and so does not have
corresponding code in sample self and class/hid/core.c covered.
Also on_idle implementation in HID sample has not taken into
account send_report() which also calls hid_int_ep_write().
This patch enables USB_DEVICE_SOF and revises both on_idle and
the regular report function.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HID core implementation has support for Get/Set Idle requests and
on idle report processing. Basically it has little use.
Also, it has no users in the tree except samples/subsys/usb/hid,
which does not have it turned on.
There are several issues with the idle report implementation:
- Core calls hid_ops.on_idle callback with Report ID 0,
but this ID is reserved and should not be used.
Report descriptors do not use Report ID index zero.
- Calling hid_ops.on_idle with Report ID 0 cann only
be turned off by calling SetIdle(Duration = 0, Report ID = 0),
but not by SetIdle with Report ID not equal zero.
- GetIdle with Report Id not equal zero returns wrong
value after SetIdle(Duration = n, Report ID = 0)
- It may happen that hid_ops.on_idle is called for
different Report ID during one and the same SoF event.
But there can be only one hid_int_ep_write() during a frame.
This patch fixes listed issues and revises Get/Set Idle request,
and hid_sof_handler() implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add intergration_plaforms entry in testcase.yaml.
Thanks to that nrf52_bsim platform will be used instead
of default platforms that do not include nrf52_bsim.
The test will be not dead as it is now (executed only
when tests code has been changed).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Added support for STM32H753XX by adding CONFIG_SOC_STM32H753XX to list
of H7 SoC with maximum 480MHz SYSCLK.
Signed-off-by: Jeremy Wood <jeremy@bcdevices.com>
When, due to EMC, a spike happens on the SCL line the driver stay in
BUSY state. It could be reproduced by forcing the SCL temporarily to
ground. It's probably a behavior relating to the operation of
multi-master.
By adding a timeout to the msg_read and msg_write function we can
detect that something went wrong, and when that happens we force the
end of communication.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
We need all available runners to be defined as subclasses of
runners.core.ZephyrBinaryRunner in order to be able to look them up by
name at runtime. We do this by importing them from runners.__init__.
This process periodically fails when some runner or other cannot be
imported, usually because it is trying to import something outside of
stdlib and not handling ImportError.
Rather than letting this bring down the entire Python process, catch
and log the error. Sort the list again while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Runners may not import anything outside of stdlib unless they handle
the possible ImportError.
Apply this rule to the bossac runner. The general pattern is to have a
MISSING_REQUIREMENTS global that we handle at the beginning of
do_run(), but in this case this isn't a missing pip package, but a
misconfiguration. Just log a warning; it won't happen in practice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Runners can (and many should) depend on the devicetree to decide what
to do, especially as it relates to the flash layout. Make it so that
they do not have to manipulate sys.path to get a hold of the edtlib
directory by doing it in one place, before importing any of them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Advanced stm32g0 socs additionally have gpio port e.
This commit adds the missing definition for the port.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Restructures dts files(value line definitions are no longer included by
others), and adds additional devices(g05x and g0bx).
All newly added timer pwm prescalers are set to 0.
lpuart1 is moved from stm32g0.dtsi to stm32g031.dtsi, as it is not
available on stm32g0x0 soc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
"interrupt-names: combined" propterty is only used for stm32 i2c driver,
remove all other existing occurences for stm32g0(adc, lpuart, usart).
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Moved the call to obj_id_to_index such that we can check for valid
ID before getting the index.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a ots_obj_manager function that returns true if the object is
in the object manager, or false otherwise.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The directory listing object is an internal object which
content is the aggregation of all the metadata of all objects
(including the directory listing object itself). The client
can read this value to get a list of all objects with names,
lengths, and other metadata.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add optional maximum-speed parameter to USB nodes. This affects all
defined stm32l4xx, except stm32l4rx and stm32l4sx
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
This parameter is defined for stm32f405 which and is included into
stm32f469. The include order is as follows:
st/f4/stm32f4.dtsi
st/f4/stm32f401.dtsi
st/f4/stm32f405.dtsi <-- ram_size defined here
st/f4/stm32f407.dtsi
st/f4/stm32f427.dtsi
st/f4/stm32f429.dtsi
st/f4/stm32f469.dtsi
Refer to Application Note AN4879 from ST to view ram size for each MCU.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
The order of Destination CIDs shall correspond the order of Source CIDs
including its amount so errors that don't result in all connection being
refused shall not break the order of CIDs.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For errors that means all connections have been refused there is no need
to add dcids since none will be valid.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When receiving L2CAP_CREDIT_BASED_CONNECTION_REQ the remote may request
more channels than allowed so this checks if amount of channel surpasses
the maximum channels (5) and return an error.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is an intergration testcase for mem_heap.
Add an testcase to verify that multiple threads
can share the same heap space without interfering
with each other.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Adds a Proxy callback structure with a callback for Node ID enable and
disable. This API follows the Friend and LPN API pattern in mesh/main.h,
and can be expanded with more callbacks later.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix an assertion when disabling Extended Advertising with
auxiliary PDUs. Stop the auxiliary PDU scheduling after the
primary PDU scheduling is stopped first. This will avoid the
assertion caused due to a search for a stopped auxiliary PDU
offset by the primary PDU scheduling that is being stopped.
Fixes#32866.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
`west` is an optional tool.
Although `west` is optional, a developer might be working with both west
and non-west based projects, like
- vanilla Zephyr (using west)
- downstream project (not using west)
and thus have west installed, but not always in use.
In the downstream project scenario not using west, then running CMake
will print the following error:
```
FATAL ERROR: no west workspace found from "<path>/zephyr";
"west topdir" requires one.
Things to try:
- Change directory to somewhere inside a west workspace and retry.
- Set ZEPHYR_BASE to a zephyr repository path in a west workspace.
- Run "west init" to set up a workspace here.
- Run "west init -h" for additional information.
```
This commit sets `WEST` CMake variable to `WEST-NOTFOUND` when west is
found but Zephyr is not in a west workspace (`west topdir` fails)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This fixes the limitation of sending an extended CAN frame.
Because the default value of `CONFIG_SHELL_ARGC_MAX` is 12 the maximum
number of bytes for an extended CAN frame is 7.
Increasing it to 13 to allow all 8 bytes to be sent from the shell.
Tested on nucleo_f767zi.
Signed-off-by: Cezar Burlacu <cezar@embeddedp.ro>
When using `OPENTHREAD_ECDSA` deterministic variant has to be
enabled after some OpenThread changes. Also generic public key
functions are required.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add locking when accessing interface list and the DHCPv4 config
struct that is found in net_if.
Fixes#33348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for including a board-specific config.yaml file
in the pyocd flash command. Similary to openOCD, the config
file is placed in the board directory under support/.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use the reschedule solution as there may be cases where a newer
deadline should supersede an older one.
The implementation has no locking and so has data races between the
handler and external events. Emit a console diagnostic in one case
where the race can be detected.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix issue #33114#33120. Modify the testcase that run failed on iotdk
and nsim. This testing do not need receive thread ID when invoke
k_mbox_data_get() with NULL param. The testcase purpose is invoke
this API with NULL buffer and NULL receive_id. It will cause fatal
error if use a uninitialize receive id.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
With the introduction of #32556 changing the BOARD now prints a warning.
Zephyr provides `zephyr_file()` to look up overlays and Kconfig
fragments for a specified board, and it used to be possible and safe to
do:
```
function(my_func)
set(BOARD <local_scope_board>)
zephyr_file(CONF_FILES ...)
endfunction(my_func)
```
As the BOARD inside `my_func` is locally scoped, this is safe to do.
But with introduction of #32556 a warning is now printed when running
CMake.
Therefore `zephyr_file` has been extended to allow for optional BOARD
and BOARD_REVISION arguments.
If BOARD is not given as argument the current BOARD in the build system
will be used.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Watching of specific Zephyr CMake build variables ensure users cannot
accidentally set important variables, such as BOARD, SHIELD, CONF_FILES
late in the build process.
This was also added to zephyr_check_cache() function.
However, the BOARD provided by the user may look as `<board>@<revision>`
and will be kept in the cache in that form.
However, the BOARD value from cache is spit into internal build
variables as: BOARD=<board> and BOARD_REVISION=<revision>.
However, this is done after `zephyr_check_cache()` which then triggers
the variable watch to trigger, and printing a warning when using board
revisions.
Therefore WATCH is now optional for `zephyr_check_cache()` and watch for
BOARD variable will be enabled when boilerplate has completed all board
handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The spi loopback tests enables SPI ASYNC which for the SAM0 SPI driver
requires DMA support is configured. None of the current SAM0 based
boards configure DMA for SPI and thus we exclude these boards as the
test will not compile for these boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SAM0 uart driver requires dma configured for async support and
the uart async support assumes all UARTs support async. None of the
atmel SAM0 boards are configured this way and thus the tests will
not currently build for these boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This unifies all the display of region size in hex.
Some of them are there to aid in figuring out the end of
a memory region so it is easier if they are already in hex.
This also fixes the display of address range where the end
is off by one and should be (base + size - 1).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The linker script has been updated to have correct load address
in the ELF file, so there is no need for the horrible hack.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
After page table is load, we should be executing in virtual
address space. Therefore we need to set ESP to the virtual
address of interrupt stack for the boot process.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit d40e8ede8e.
This fixes triple faults after wiping the identity mapping of
physical memory when running entering userspace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit 7d32e9f9a5.
We now allow the kernel to be linked virtually. This patch:
- Properly converts between virtual/physical addresses
- Handles early boot instruction pointer transition
- Double-maps SRAM to both virtual and physical locations
in boot page tables to facilitate instruction pointer
transition, with logic to clean this up after completed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reuses the page directory pointer table (PAE=y) or page
directory (PAE=n) to point to next level page directory table
(PAE=y) or page tables (PAE=n) to identity map the physical
memory. This gets rid of the extra memory needed to host
the extra mappings which are only used at boot. Following
patches will have code to actual unmap physical memory
during the boot process, so this avoids some wasting of
memory.
Since no extra memory needs to be reserved, this also reverts
commit ee3d345c09
("x86: mmu: reserve more space for page table if linking in virt").
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows specifying second --verbose in command line to
enable more messages. Two new ones have been added to aid
in debugging code for mapping and setting permission to
a single page.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There actually is no need for a separate kconfig here, as
the kernel VM address and SRAM address can be used to figure
out if the kernel is linked in virtual address space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no need to use this kconfig, as the phys-to-virt
offset is enough to figure out if the kernel is linked in
virtual address space in gen_mmu.py.
For code, use Z_VM_KERNEL instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The entry point is at a physical memory location; use the
physical instead of virtual address of the start symbol.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to do a few things differently if we are to support
a virtual memory map, i.e. CONFIG_MMU where CONFIG_KERNEL_VM_BASE
is not the same as CONFIG_SRAM_BASE_ADDRESS.
- All sections must be specified with a VMA and LMA, where
VMA is the virtual address and LMA is the physical memory
location.
- All sections must be specified with ALIGN_WITH_INPUT to
keep VMAs and LMAs synchronized
To do this, the existing linker macros need some adjustment:
- GROUP_LINK_IN undefined when CONFIG_KERNEL_VM_BASE is not
the same as CONFIG_SRAM_BASE_ADDRESS.
- New macro GROUP_ROM_LINK_IN for text/rodata sections
- New macro GROUP_NOLOAD_LINK_IN for bss/noinit sections
- Implicit ALIGN_WITH_INPUT for all sections
GROUP_FOLLOWS_AT is unused anywhere in the kernel for years
now and has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit 9de70a78fe.
The tests have been updated so there is no need to skip tests
when the kernel is linked in virtual address space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With the introduction of Z_MEM_*_ADDR for physical<->virtual
address translation, there is no need to have x86 specific
versions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit 7d32e9f9a5.
These functions are needed for linking kernel in virtual address
space when it differs from the physical address space.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
__tbss_start should be a virtual address.
__tdata_start should also be a virtual address, unless we're
using XIP in which case each thread should copy its thread-
local data out of flash.
Fixes issues with a kernel linked at a virtual address.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add SoC support to enable Cypress PSoC-6 pinctrl. This add devicetree
macros to handle pinctrl nodes and SoC GPIO methods to configure pins.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Introduce PSoC-6 pinctrl infraestructure and definitions. This add
files to handle devicetree entries and following modifications:
- add pinctrl bindings
- update gpio bindings with pin-cells
- add pinctrl node and move gpio nodes inside
- declare pinctrl for current uart entries
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
CORTEX_M_SYSTICK should be disabled if LPTIM is selected.
Current implementation is not efficient to do so.
Rework the way the dependency is stated.
Fixes#33342
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Turn sys_heap_dump() into sys_heap_print_info() to better reflect
what it actually does, and improve the information being printed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The patch improves handling runners errors from flashing. It
add thread termination in case of process returning non 0 exit
code. Before, even though the error was returned,
a thread was not terminated and test ended
only after timeout termination. The patch also adds information about
the failure reason to the reports
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Pretty crude for now, as we always invalidate the entire set.
It remains to be seen if more fined grained TLB flushing is worth
the added complexity given this ought to be a relatively rare event.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce the basic support code for memory domains. To each domain
is associated a top page table which is a copy of the global kernel
one. When a partition is added, corresponding memory range is made
private before its mapping is adjusted.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We need to protect against concurrent modifications to page tables and
their use counts.
It would have been nice to have one lock per domain, but we heavily
share page tables across domains. Hence the global lock.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Two scenarios are possible.
privatize_page_range:
Affected pages are made private if they're not. This means a whole
new page branch starting from the top may be allocated and content
shared with the reference page tables, except for the private range
where content is duplicated.
globalize_page_range:
That's the reverse operation where pages for given range is shared with
the reference page tables and no longer needed pages are freed.
When changing a domain mapping the range needs to be privatized first.
When changing a global mapping the range needs to be globalized last.
This way page table sharing across domains is maximized and memory
usage remains optimal.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Make the allocation, population and linking of a new table into
a function of its own for easier code reuse.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Update test to account for new default parameters that allow
use image smaller than flash device capacity.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Currently level interrupts are implemented using GPIO SENSE, but edge
interrupts using GPIOTE events. Using GPIOTE events results in increased
power consumption according to product specifications and erratas of
some nRF MCUs. In case of nRF52832 it is <20uA in System ON Idle and
~400-450uA when used in conjunction with SPI or TWI.
Add a user configurable option to select between GPIOTE events and GPIO
SENSE mechanism, for implementing edge interrupts. Selecting GPIO SENSE
option will allow to reduce power consumption in scenarios mentioned by
nRF MCUs erratas.
Additionally GPIO SENSE mechanism (as opposed to GPIOTE event) allows to
detect state changes of pins configured as output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Replace a development assertion in the implementation of
Connection Parameter Request Procedure with an internal
comment and handle transaction violation be ignoring the
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the leak of node rx buffer used to generate the
connection complete and CSA#2 event introduced in the
commit 4a5f263e5a ("Bluetooth: controller: split: Validate
chan map and hop value") and the
commit 94d5f0854e ("Bluetooth: controller: fixing error
re. all zero chmap in conn-ind").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a follow-up to commit 763e73d7da.
Switch to the new properties for specifying SDA and SCL pins,
as the old ones (sda-pin and scl-pin) are now deprecated.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow up to commit 2aab687270.
Since device_is_ready() is no longer a system call, there is no need
to keep z_impl_device_is_ready().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Instead of silently closing the link we should send a Link Close message
three times before resetting provisioning state.
From Mesh Profile Specification v1.0.1.:
```
5.3.1.4.3 Link Close message
The Link Close message is used to close a link.
```
```
5.3.2 Link Establishment procedure
The device shall start the link timer, set to 60 seconds, when the link
is open. When the link timer expires, then the device shall close the
link.
```
```
5.3.3 Generic Provisioning behavior
If the sender does not receive a Transaction Acknowledgment message
within 30 seconds after sending the first message in a transaction,
the sender shall cancel the transaction, cancel the provisioning
process and close the link.
```
From Mesh Profile Test Specification p6:
```
MESH/PVNR/PBADV/BV-01-C
Test Procedure:
[...]
6. The IUT is induced to send a Link Close message with the Reason field
set to 0x02 to terminate the link. The message is sent at least three
times to ensure the message is received by the Lower Tester.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Refactor out the BR/EDR handling from hci_core.c to its own source file
in br.c.
BR/EDR consists of inquiry and discovery roles in addition to
initialization. SSP is still kept separate.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Align the SSP HCI event handlers with the rest of the functions in using
the bt_ prefix. In order to avoid name conflict with the HCI struct
definitions the infix _evt_ has been dropped.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation error with BR/EDR is enabled but the feature
CONFIG_BT_KEYS_OVERWRITE_OLDEST is disabled.
This caused compilation error because the field aging_counter is not
defined in the keys struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the advertiser roles handling from hci_core.c to its own
source file in adv.c.
Advertising roles consists of legacy and extended advertiser, and
periodic advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the scan roles handling from hci_core.c to its own source
file in scan.c.
Scan roles consists of regular scanning and synchronization to
periodic advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Don't include checks for advertiser is enabled when the broadcaster role
is not enabled. This makes it possible to have bt_le_ext_adv_foreach
be excluded from the compilation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the identity handling from hci_core to its own source file
in id.c
Identity consistes of managing the identities of the device, the privacy
feature which hides the identities. And handling of the identity
resolving list in the controller, needed to support privacy-enabled
remote devices.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the code so that bt_adv_lookup_legacy is always called after
the IS_ENABLED(CONFIG_BT_BROADCASTER) configuration has been checked and
the code path will be excluded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor command state state handling to one function.
When setting state outside of hci_core the cmd macro is not available,
so in order to assign the buf pointer to state the function is needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The function returns true if the node with the referenced
node label is compatible and enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The script gen_handles.py was introduce in #32127 but relies on
ZEPHYR_BASE being set in environment.
However, it is not a requirement to set Zephyr base in the users
environment, therefore this is changed to an argument `-z` or
`--zephyr-base` which will be passed from the build system to the
script.
If `-z` or `--zephyr-base` is not provided, the environment will be
checked for a ZEPHYR_BASE setting there.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There was no close method implemented for AF_PACKET type
sockets. This meant that calling close() on packet socket
caused NULL pointer access.
This will allow #32949 issue to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sentry symbols that mark the ends of the newlib heap area were
being placed in cached memory, which violates the coherence rules.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
OpenThread UART tx callback has been processed even if it was not
triggered by OpenThread otPlatUartSend function.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This new subsystem can be used to supervise individual threads. It
is based on a regularly updated kernel timer, whose ISR is never
actually called in regular system operation.
An existing hardware watchdog can be used as an optional fallback if
the task watchdog itself gets stuck.
Signed-off-by: Martin Jäger <martin@libre.solar>
Improve the readability of the LMP90100-EVB RTD sample by adding
comments and further definitions instead of magic values within the
code.
This furthermore fixes an off-by-one error for the maximum ADC value
used in the formula for calculating the resistance of the RTD (8388607
vs. 8388608).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Ported commit 49a3ce5881
Transfer locking is required if multiple devices use the same i2c bus.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
When CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS=y, we also
need to add -Xunaligned option for mdb to enable unaligned
memory access feature for nsim.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Some devices may use different reference than cpu clock. Add
support for using swo-ref-frequency property when present.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added file with common properties for cortex-m cores.
Added optional swo-ref-frequency property.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The twister integration on this board is problematic:
+ It assumes that it will be building on the device's linux
installation, which is often a somewhat slow Apollo Lake board (Up
Squared) with extremely limited storage space (mine has only 5G left
on the internal eMMC after Zephyr installation and can't fit a full
twister build tree).
+ Reading the trace output before the firmware load will emit output
from a previous test run. Twister isn't consistent about the order
in which the --west-flash and --device-serial-pty scripts are
started, which means that tests show spurious failures when the
order changes or if the device started with a test in its trace
buffer.
This is an elaboration on the scripting I've been using. It's a
single script that works as both the west-flash and device-serial-pty
handlers (or as an all-in-one standalone if you pass it the path to
the zephyr.elf file instead of running it under twister). It reaches
the device host over ssh and runs the tools with sudo, minimizing
administration overhead (the device does need a checked-out Zephyr
tree and a built diag_driver kernel module though).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change fixes an issue related to data access out of array bounds and
suppresses compiler warning.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Fix compilation issue in direction finding tests, undefined references
to radio_df_ant_switching_gpios_cfg and
radio_df_ant_switching_pin_sel_cfg
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The internal function z_smp_reacquire_global_lock() has not used by
anywhere inside zephyr code, so remove it.
Fixes#33273.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
This "else" clause was dead code, in a valid
tree it's not possible to have a node and
its child both be red.
Fix issue #33239.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
We don't use xcheck (we disable it by passing '-Hnoxcheck' to
linker) so let's avoid xcheck object linkage as well by
passing '-Hnoxcheck_obj' option.
'-Hnoxcheck_obj' option implies the '-Hnoxcheck' option.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
As of today during the Zephyr start we
- invalidate I$
- disable I$
- enable I$
Given that we don't need to have I$ disabled during any
initialization period and ARC processors have caches enabled
after reset the I$ disabling/enabling is excessive, so we can
drop it.
By that we also aligh the I$ initialization on ARC with other
projects like U-boot and Linux kernel.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Implement MSG_WAITALL flag for stream sockets. Setting this flag on
`recv()` call will make it wait until the requested amount of data is
received.
In case both, MSG_WAITALL all is set and SO_RCVTIMEO option configured
on a socket, follow the Linux behavior, i. e. when the requested amount
of data is not received until the timeout expires, return the data
received so far w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the option CONFIG_BT_HCI_ACL_DATA_SIZE which allows the user
to configure the max HCI ACL data payload. This is needed for platorms
where the BLE LL, HCI uart and host run on three different cores.
Fixes: #30441
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
Overwrite the existing bond when the IRK of the existing bond could not
resolve the RPA of the peer. This would happen if the peer has deleted
the bond and replaced the IRK that was used.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor update_keys_check helper function to operate on input keys
input. This allows the function to be re-used on a keys structure that
is not the current connection keys.
This also avoids the helper function changing the connection state.
The conn->le.keys pointer should at this point always have been
assigned, as central when sending the pairing request, and as peripheral
when receiving the pairing request at the very latest.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There are several interesting use caseis of VFS scattered around
in samples, for example usage of FAT in RAM in USB mass storage
that are worth mentioning in VFS reference documentation.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The previous implementation of process_dns() handler did not
properly catch how many queries we sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Health Fast Period Divisor is stored within
the model publish parameters on the access layer.
The opposite part for divisor restoring has been missed.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Updated test and extended the configuration to valided packaging when
_Generic is not being used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Due to the fact that define was created after including
cbprintf_internal.h, it was not used there. Change the order and fix
the issue that was revealed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Nothing in the tree is using the "passlist" term in the "blocklist /
passlist" pair. However, west is using "blocklist / allowlist" already
in a released version.
Recommend blocklist/allowlist instead of blocklist/passlist to avoid
having to add yet another possible replacement, since nothing is using
passlist right now.
Note that blocklist/allowlist is in widespread use throughout many
projects, including Chrome.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
F0: from version v1.11.1 to version v1.11.2
F1: from version v1.8.2 to version v1.8.3
F2: from version v1.9.1 to version v1.9.2
F3: from version v1.11.1 to version v1.11.2
F4: from version v1.25.1 to version v1.25.2
L0: from version v1.11.3 to version v1.12.0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The fixed number of 24 RTEs is a legacy thing, and long gone by now.
IOAPICs expose the maximum number of RTEs they have via the version
register, so let's use it.
This avoids to manually tweak a Kconfig option (which is now removed)
and fixes the RTE number for all x86 targets relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds a test suite for Bluetooth Mesh in bsim_bt tests, including 10
tests for common transport behavior. This test suite includes a readme
and a simple framework for adding more mesh tests in the future.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds the const qualifier to the internal api for adding and removing
virtual addresses, to allow them to accept const hardcoded values in
tests.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves the debug log printing the transport packet metadata to after the
keys are resolved, so that the subnet pointer is valid.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a "polled" function to the friend callback structure, that gets
called every time the friend receives a poll message. The polled
callback is called before the establish callback, to match the LPN
behavior.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If there is no timeout, the connect will timeout immediately
and the connection is not established.
Fixes#33185
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Autostarting PPP is far from controversial. There are many, many reasons
someone could have for wanting to control exactly when PPP starts. Power
management, NET_EVENT race condition avoidance and any application not
requiring constant and instant use of networking just to name a few.
This commit introduces a Kconfig setting, GSM_PPP_AUTOSTART, which
controls whether gsm_ppp should connect and initialize PPP at boot. It
is set to "y" as default to minimize surprises for legacy code.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Replace *_thread_resource_pool_assign() in the reference with the new
k_thread_heap_assign() since both k_thread_resource_pool_assign() and
z_thread_resource_pool_assign() has been removed prio to v2.5 (by the
commit c770cab1a3 and 3c2c1d85b0 respectively) along with the
k_mem_pool API removal.
For the resource pool inheritance test, the variables with "res_pool"
string has been replaced by "heap_mem" to align with the documentation
fix. No functionality has been changed.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Added (void) cast to supress coverity report. The usage of K_FOREVER
tells me we're not interested in the returned value.
Coverity-CID: 219653
Fixes#33034
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
This commit provides the necessary overlay to make the test pass
on the QuickFeather hardware.
Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com>
As we have removed MPU_STACK_GUARD for ARC_MPU_VER 2, we also
need to remove ARCH_HAS_STACK_PROTECTION for boards with
ARC_MPU_VER 2 and no hardware stack checking, relative commit:
commit(arch: arc: remove MPU_STACK_GUARD for ARC_MPU_VER 2)
in pull request #24021
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The static device dependencies from devicetree are not the only ones
that might be present at runtime. Add API that allows visiting
required devices without assuming that handles for or pointers to them
can be accessed as a static contiguous sequence.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
BabbleSim execution was (AFAICT mistakenly) disabled in
dda6a5ee90. Re-enable it so we run them in
CI again.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If return value is negative (failed) then log the error with a
message.
Coverity-CID: 219519
Fixes#32927
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
In some stm32 series systick was disabled in order to
allow alternate use of lptim timer as kernel low power ticker.
Doing this, dts based definition of CORTEX_M_SYSTICK Kconfig symbol
is disabled and CORTEX_M_SYSTICK was redefined with 'default y'
in stm32 soc files which makes things more complex to handle to
alternate with LPTIM activation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add execution time for testing result of each ztest testcase as:
START - test_sem_multi_take_timeout_diff_sem
PASS - test_sem_multi_take_timeout_diff_sem in 2.54 seconds
Fix#32137.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Trigger BT_ASSERT with message to inform kernel when encountering an
unrecoverable condition in order to dump all pending logging messages.
In this change, the log level is configured by CONFIG_BT_LOG_LEVEL
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
The SCA (sca) field of bt_iso_chan_qos did not give much
information about the expected values or what they meant,
nor any information about what the value perhaps should be.
Updated the description and the ISO shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since the removal of Quark-based boards, there are no user of
Minute-IA. Also, the generic x86 SoC is not exactly Minute-IA
so change it to use a fairly safe CPU_ATOM.
Fixes#14442
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Can only be written at the highest Exception level implemented.
For example, if EL3 is the highest implemented Exception level,
CNTFRQ_EL0 can only be written at EL3.
Also move z_arm64_el_highest_plat_init to be called when is_el_highest
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Logic for selecting non-default platforms listed in
integration_platforms did not work. Functionality is restored in this
change.
Fixes#32835
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To prevent the transport layer from accepting duplicate or out of order
segmented messages, add an RPL-like check for the SeqAuth of the
segmented messages when their context is allocated. This prevents
duplicate receives of the same segmented messages in the case where a
single source address sends two segmented messages in parallel (to two
different addresses):
Previously, when receiving two segmented messages, the first message
would go through to the access layer, then the second. Then, if the
transport layer received any repeated segments for the first message, it
would fail to identify the SeqAuth as old, as all its segments were of
new sequence numbers, and the "already complete SDU" check would only
look at the second message. Thus, the segmented message got processed
again and passed to the access layer, even though it was a duplicate.
To solve this, we need a mechanism like RPL, but only for the segmented
messages' SeqAuth. We cannot re-use the actual RPL mechanism, as it
can't support the scenario provoked by the "blocking tx" mechanism in
transport. This mechanism allocates the SeqAuth when the message is
first passed to the transport layer. The ongoing message that caused the
block would keep sending segments with higher sequence numbers than
the blocked message got, which will cause the blocked message to fail
the RPL check.
This patch adds a parallel SeqAuth mechanism to the RPL module, which
only deals with the SeqAuth of the segmented messages. This list gets
checked when the segmented message is first allocated, in the same
manner as the general RPL mechanism. The storage gets hooked into the
RPL mechanism, by adding a separate seg field to each RPL entry.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
DHCPv4 client code needs to know information when network
interfaces are going down and up. So make sure that network
management config options are enabled in that case.
Fixes#33137
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust these for 0.10. This version parses differently as a string vs.
as a float. Document that quoting the value avoids the issue. Make
some other adjustments and improvements for clarity.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The west 0.9 documentation for group-filter states:
Only the top level manifest file’s manifest: group-filter:
value has any effect. The manifest: group-filter: values in any
imported manifests are ignored.
This turns out to have been a mistake, because all users who import a
manifest which makes some projects inactive will have to also manually
disable the same groups just to get the same default list of projects.
Example manifest fragments showing the issue:
# my/west.yml
manifest:
projects:
- name: upstream
import: true
and:
# upstream/west.yml
manifest:
group-filter: [-disabled-group]
projects:
- name: i-want-this
- name: i-do-not-want-this
groups:
- disabled-group
As written, my/west.yml will include 'i-do-not-want-this' as an
active project.
This kind of leaky faucet has proven to be an unintuitive and poor
user experience. Users expect to get the default projects without
having to copy the group-filter for everything they import.
We can't reverse this behavior without pushing out a new schema
version, however: manifest schema 0.9, and therefore west 0.9.x, is
doomed to this bad behavior.
What we'll do to move past this is create a new schema version 0.10
that does the right thing, document the 0.10 behavior, and discourage
combining these two features in west 0.9.x.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the content related to handling imports that refer to multiple
files handled to right after the ordered list which defines the order
that manifests are imported. The current placement at the end of this
docs section was poorly chosen.
Create subsections for how projects and extensions are decided in the
final resolved manifest.
The project revisions in the top level example manifest fragment are
not important here. Remove them for clarity.
The top level manifest file need not be named west.yml now; adjust
accordingly.
This is prep work for adding a new subsection for group-filter.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The documentation suggests that 'west update PROJECT' can be done if
PROJECT is defined from some imported manifest. That's actually not
true. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This diff is deceptively complicated. No text is being added or
removed; the only thing that's being done is that the entire 'Manifest
Imports' section is being moved down below the groups and submodules
sections.
This is prep work for a later commit which will document revised
semantics for mixing 'import' with 'group-filter'. This will make
'group-filter' values compose across imports, so it will be useful to
have documentation for group and group-filter before documentation for
imports. That will let us document the way they work together within
the 'Manifest Imports' section without using concepts that haven't yet
been defined.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added validation of alignment to cbprintf_package. Error is returned if
input buffer is not aligned to the largest argument.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extend test to validate cbprintf static packaging on various
platforms.
Added more test configurations: complete, nano, long double.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add supported peci response codes 0x80 (Out of resources timeout)
and 0x81 (Resources required to service the command are in low
power state).
Signed-off-by: Diwakar C <diwakar.c@intel.com>
Commit 0d4dca10b2 ("scripts: edtlib:
child binding compatibles match parents") was a hack meant to keep the
edtlib.Binding class in place without modifying some twister behavior
that needed further changes to work properly with first-class binding
objects.
This is a hack and is no longer necessary, so back out of this change.
Child Binding objects now have None compatible properties unless the
binding YAML explicitly sets a compatible.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Originally added in 7733b94224.
This filter is not well-formed. It's meant to match nodes like
/leds/led_0 in this DTS:
/ {
aliases {
led0 = &led0;
};
leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <...>;
label = "LED 0";
};
};
};
Uses look like this:
filter: dt_compat_enabled_with_alias("gpio-leds", "led0")
But notice how the led_0 node doesn't have compatible "gpio-leds";
it's actually the *parent* node that has that compatible.
Replace this with a new filter, dt_enabled_alias_with_parent_compat(),
which is used like this:
filter: dt_enabled_alias_with_parent_compat("led0", "gpio-leds")
This has a name and argument order that makes the meaning of the
filter clearer.
Replace in-tree users with the new filter.
Deprecate the old filter and warn about its use using the standard
logging module.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When Extended Advertising terminated due to duration or
maximum number of events, the auxiliary PDU scheduling
is now correctly stopped.
Fixes#31254.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add option to disable validation callback support by setting the
validation buffer size to 0, which allows to save some memory in case
it's not needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a data validation callback to the resource structure, which can be
registered by an application. It allows to verify the data before
actually modifying the resource data.
If the callback is registered for a resource, the data is decoded into a
temporary buffer first, and only copied into the actual resource buffer
if the validation is successfull. If no validation is required (and thus
no callback registered) the resource value is decoded directly into the
resource buffer, as it used to be.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is the same problem as seen for #32053. Refer to that for the
details and propose a similar fix.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Mention that it's "data offset" in 32-bit words. Helpful when doing
code review and using search for "th_off".
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make sure that CONFIG_NET_TCP_ISN_RFC6528 is not set when compiling
Civetweb. There are compile issues in Civetweb if both mbedtls and
POSIX API option are set, and this happens if the TCP ISN option is
enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds the code managing the syscalls. The privileged stack
is setup before jumping into the real syscall.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This leverages the AT (address translation) instruction to test for
given access permission. The result is then provided in the PAR_EL1
register.
Thanks to @jharris-intel for the suggestion.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce the arch_user_string_nlen() assembly routine and the necessary
C code bits.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
User mode is only allowed to induce oopses and stack check failures via
software-triggered system fatal exceptions.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The arch_is_user_context() function is relying on the content of the
tpidrro_el0 register to determine whether we are in user context or not.
This register is set to '1' when in EL1 and set back to '0' when user
threads are running in userspace.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Introduce the first pieces needed to schedule user threads by defining
two different code paths for kernel and user threads.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Wrap arch_sched_ipi() call in z_thread_abort() with ifdef checking for
hardware support of IPI.
Fixes#32723
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
if qspi mode is enabled, the status register will be like xxxxxx1x,
so we should compare with value 2 to check whether qspi mode
is enabled successfully.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
Replace the legacy delayed work API with the new delayable work API.
Avoid cancelling work and manually notifying when the subscription is
disabled; instead allow the work item to do this.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace the legacy delayed work API with the new delayable work API.
Use a zero period as a flag value to ensure that the work handler is a
no-op of the publish operation is disabled.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Switch to new work API, taking advantage of the difference between
schedule and reschedule to force an update if the new deadline is
sooner, and retain any previous deadline (or use the new deadline) if
it isn't. Do not leave a path out that could, due to races, fail to
schedule necessary work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A previous check and return for (maxlen <= 0) makes manlen at least 1 so
checks for (maxlen < 1) would never evaluate to true. Remove these
checks and merge those cases into one.
CID: 215392
Fixes: #33092
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Civetweb does not work properly with mbedtls if Posix APIs
are enabled. For example time function prototypes are not found
by the mbedtls module if we enable mbedtls in the sample.
Disable TCP ISN RFC6528 support because of this for civetweb
samples, as setting that option will pull in mbedtls and
we get a compilation warning because time() is not declared
by any header file that mbedtls is including.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_TCP_ISN_RFC6528 is disabled, then mbedtls include
files are not available so check this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to new work API. Avoid a racy cancel by allowing the work
handler to deal with an immediate off when the time remaining changes
to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If EL2 is implemented but we're skipping EL2, we should still
do EL2 init. Otherwise we end up with a bunch of things still
at their (unknown) reset values.
This in particular causes problems when different
cores have different virtual timer offsets.
Signed-off-by: James Harris <james.harris@intel.com>
This commit simplifies the Device Tree configuration by using
the new helpers introduced in #30536.
In particular:
- get bus devices with DEVICE_DT_GET
- get SPI information with SPI_CONFIG_DT_INST
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The original implementation of resubmitting a delayed work item
removed the item not only from the schedule, but also from the work
queue if it was already in the work queue. This is not the semantics
of the new implementation, which will leave the work item in the queue
if the previous deadline had elapsed and the work item was submitted.
The new semantics is preferred, as it improves consistency with SMP
targets where once an item has been submitted to a queue it can be run
at any time, and scheduling it again doesn't magically reverse the
submission. The original test would never have passed on an SMP
target, and passes now on qemu_x86 only because the timing granularity
prevents the work item from being both scheduled and queued at the
same time.
The problematic test application is the one developed for the original
implementation. Correct functioning of the new implementation is
fully verified by the sibling work test. That the legacy API does not
precisely preserve the original behavior where it was not consistent
between SMP and uniprocessor targets is regrettable, but unavoidable.
Remove the tests that cannot pass reliably.
Also fix a missing reset() after a test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Currently, if GPIO_DISCONNECTED flag is used pin remains as input,
this causes some additional power to be drain which is
undesired.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Previously, a racing write to the provided metadata could result
in up to CONFIG_LOG_STRDUP_MAX_STRING-2 bytes after the
end of user-accessible memory being leaked into the strdup pool
or the resulting log.
For now, explicitly copy the metadata string. In an ideal world
this could directly copy from userspace into the strdup buffer, but
this obviously only works if strdup is enabled.
Signed-off-by: James Harris <james.harris@intel.com>
Remove redundant if() statements that are already included with
k_mutex_unlock()
Relates to issue #32994
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Fix the error of the [Coverity CID :219489] "Structurally
dead code in tests/drivers/dma/loop_transfer/src/test_dma_loop.c"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
smp and mpu are architecture specific samples and do not apply to
majority of support platforms, so move them to arch/.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This should align with subsys/display which we do not have yet. Plan is
to move lib/gui into subsys/display.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move samples under subsys/audio. We still do not have this as a
subsystem, but it is on the horizon.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove useless operands since 'bit' field of npcx_clk_cfg structure is
only 3-bit depth and always under 8.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL prevents changing data content in the write function of host
interface by declaring it as constant pointer.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Verify the result of option encoding while forming Deregister message
instead of silently ignoring it.
Coverity ID: 215373
Fixes#33096
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In function wwdg_stm32_init, return value of clock_control_on
was not checked.
This is reported as an issue by coverity (CID 219600).
Fix this.
Fixes#33067
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In function gpio_stm32_enable_int, retiurn value of clock_control_on
was not checked.
This is reported as an issue by coverity (CID 219652).
Fix this.
Fixes#33035
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
RX/TX buffer depth are configurable parameters of DW_apb_i2c.
Change code from using fixed value I2C_DW_FIFO_DEPTH to using
register ic_comp_param_1 for RX/TX buffer depth.
Signed-off-by: Satoshi Ikawa <ikawa.satoshi@socionext.com>
Fix#32774
Bit position BIT(7) is 1000 0000 in binary which is actually the
bit positon 128. BIT(7) can be used as a mask, but we need to define
the position specifically as the integer 7.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Commits affecting Zephyr that are included with the new revision:
99f9fd6 img_mgmt: Use IMG_MGMT_BOOT_CURR_SLOT as current running
slot ID (enhancement)
6f52fd9 zephyr: fix initialization of file struct (bug fix)
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The commit fixes coverity issue where return status bank erase operation
has not been checked prior to proceeding with tests.
Fixes: #32924, Coverity-CID: 219522
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If CONFIG_LOG_IMMEDIATE=n, go to panic mode with LOG_PANIC() so full
coredump is logged.
Add missing log_strdup() call.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Remove duplicates from ZEPHYR_MODULE_NAMES only if that list
exists. That avoids cmake error "list sub-command REMOVE_DUPLICATES
requires list to be present" if ZEPHYR_MODULE_NAMES is empty.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Improve the test case of CPU exception.
Add equivalence classes and input partition testing
when give an integer reason code.
Signed-off-by: Ying ming <mingx.ying@intel.com>
For z_early_boot_rand_get(), give a length less than uint32 to be input
value, ensure the API can work normally with error condition to improve
code coverage.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
The line break inside the :zephyr_file: directive causes a space
to be inserted into the link to the file, which means the link
does not work.
Signed-off-by: Ruth Fuchss <ruth.fuchss@nordicsemi.no>
Remove SPI_[0-8] and SPI_[0-8]_OP_MODES Kconfig symbols as no driver
uses them anymore. We also cleanup board and sample code to remove
use of these symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are several issues with the current implemenation of the
{inc,dec}_nest_counter macros.
The first problem is that it's internally using a call to a misplaced
function called z_arm64_curr_cpu() (for some unknown reason hosted in
irq_manage.c) that could potentially clobber the caller-saved registers
without any notice to the user of the macro.
The second problem is that being a macro the clobbered registers should
be specified at the calling site, this is not possible given the current
implementation.
To fix these issues and make the call quicker, this patch rewrites the
code in assembly leveraging the availability of the _curr_cpu array. It
now clobbers only two registers passed from the calling site.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
k_work_pending is now called k_work_is_pending.
These two uses are correct assuming the functions that invoke them are
not involved in race conditions: that the work is not pending is an
allowed condition for modifying state that will be used by the work
handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some boards prefers immediate mode (native_posix) but this sample is
intended to use deferred mode. Add explicit setting.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
To keep the generic DMA device name as defined
in the dma framework config, renamed paxdma device
label to "DMA_1".
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Previously, a racing write to the provided string could result
in up to CONFIG_THREAD_MAX_NAME_LEN-2 bytes after the end
of user-accessible memory being leaked into the thread name.
For now, make a temporary copy. In an ideal world this could
copy directly from userspace into the thread name, but that
violates the current vrfy / impl split.
Signed-off-by: James Harris <james.harris@intel.com>
Putting IPC elements on the stack isn't allowed when KERNEL_COHERENCE
is set, just make test case data static (not all apps or subsystems
are going to work with incoherent stacks, but we should support it
where we can).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This platform has a tiny handful of remaining tests that fail. We
will track them as issues, but let's exclude them from integration
testing to allow full runs to complete. Often a hung device in one
test will break an entire twister run.
Tests with known (and tracked) failures:
samples/application_development/external_lib
samples/posix/eventfd
samples/userspace/hello_world_user
tests/kernel/fatal/message_capture
tests/net/socket/socketpair
tests/portability/cmsis_rtos_v2
These tests never fail in isolated testing, but are reliable timeouts
when run in sequence in a big twister run. It's possible that the bug
here may be in twister or the flash/serial scripts:
tests/crypto/tinycrypt
tests/subsys/logging/log_immediate
tests/subsys/logging/log_output
See: #32836
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CONFIG_KERNEL_COHERENCE forbids synchronized data on the stack: no
spinlocks, IPC primitives, or things that contain them. Application
code obviously doesn't have to follow these inconvenient rules, but
our test code needs to run on platforms with incoherent stack memory.
Make these things static.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Turns out that the user can configure the "zephyr.elf" name via
kconfig to be "something_else.elf" instead. And there's a test the
does this. Use the right variable; don't hardcode.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was added early when we had (somewhat oddly) a log subsystem
backend but not a printk char_out hook. Now we have one backend that
works with both. No need, and this fixes build errors with a handful
of tests that specify LOG_MINIMAL (LOG_PRINTK requires the full log
subsystem and doesn't work with MINIMAL).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This platform has a newlib which is inexplicably missing a
_gettimeofday_r symbol. Just filter the test there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In commit efa05d1e42 ("soc/intel_adsp: Put initial stack into the
CPU0 interrupt stack") the "_end" symbol was accidentally removed from
the linker script. Newlib needs this to size its heap.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Many platforms don't have a console backend, and this fails with a
kconfig warning if you try to build on them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
All users of ATMEL_SAM0_DT_INST_DMA_NAME are now using
ATMEL_SAM0_DT_INST_DMA_CTLR so we can remove the macro.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a macro similar to ATMEL_SAM0_DT_INST_DMA_NAME but instead
provides the devicetree node back via DT_INST_DMAS_CTLR_BY_NAME
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Null-pointer exception detection using DWT is currently incompatible
with current openocd runner default implementation that leaves debug
mode on by default.
As a consequence, on all targets that use openocd runner, null-pointer
exception detection using DWT will generated an assert.
As a consequence, all tests are failing on such platforms.
Disable this until openocd behavior is fixed (#32984) and enable
the MPU based solution for now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This test understood that it can't demand equality in timing because
of races against real time, so it simply validated that the test
started at or later than the expected timeout expiration.
But when calculating the expected time, it called k_uptime_ticks()
AFTER the timeout was registered. So on systems with fast ticks (or
just bad luck) a tick expiring between the two steps will look like an
"early" expiration and fail the test. Do things in the proper order.
Also, use the correct APIs for unit conversion and timeout
construction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The error code from gatt_service_register is being ignored to ensure
that repeated actions still complete. Do this explicitly by adding
(void) casts, resolving coverity warnings on accidental error code
ignores.
Fixes#33051.
Fixes#33074.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If CONFIG_BT_MESH_SEQ_STORE_RATE is 1, the check in store_seq can be
reduced to a simple if (false), and the modulo code does not need to be
included in the build.
Fixes#33036.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves the if !(pub) check to happen before it gets used in the
initialization of the message context in bt_mesh_model_publish.
Fixes#5116.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Include virtual label's pending_store function in the LABEL_COUNT > 0
compile guard to avoid including dead iteration code in the compilation.
Fixes#32928.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Check that the assigned subnet hasn't been removed in heartbeat_send to
avoid potential NULL defererence in transport's ctl_send.
Fixes#32907.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some toolchain variants come with no clang support, so do not assume
clang by default and enable this using the enviornment variable
XCC_USE_CLANG.
export XCC_USE_CLANG=1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is a race between k_sem_take() and k_object_access_grant() so it
is possible (especially when testing SMP) that the thread tries to take
the semaphore before the originating thread has had the chance to
grant it permission.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use kinetis SIM clock divider options set in device tree
instead of hardcoded values.
The kl25z device tree did not previously define a MCG node.
This has now been added with the general "nxp,kinetis-mcg"
binding.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Use kinetis SIM clock divider options set in device tree
instead of kconfig.
The kv5x device tree originally used the undefined
"nxp,kv58-mcg" binding for the MCG node. This has been
replaced by the general "nxp,kinetis-mcg" binding.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Use kinetis SIM clock divider options set in device tree
instead of kconfig.
Both the kw40z and kw41z device tree originally used an
undefined "nxp,kw41z-mcg" binding for the MCG node.
This has been replaced with the general "nxp,kinetis-mcg"
binding instead.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
SYSCLK_DEFAULT_IOSC_HZ and BUSCLK_DEFAULT_IOSC_HZ are
not used anywhere in the tree and can be removed
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Add MCGOUTCLK define to kinetis_mcg.h to make it possible to
use \`<&mcg KINETIS_MCG_OUT_CLK>\` in device tree.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Add testcase for deadline_set. Test the situation when threads are
in unqueued state. The k_thread_deadline_set() call should not make
these threads run before there delay time pass.
Signed-off-by: Ying ming <mingx.ying@intel.com>
The test granted access to the user work queue stack from the user
work thread; this was done by k_work_user_queue_start() so was
unnecessary. Document why it's ok to grant other access after the
work thread was started.
Fix a race condition where the non-work user thread might have started
before it was given access to the resources it needs.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The code here was written to "get out of the way just long enough for
the trivial context switch and callback to execute". But on a machine
with 50 kHz ticks, that's not reliably enough time and this was
failing spuriously. Which would have been a reasonably forgivable
mistake to make had I not written this code with this very machine in
mind...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests would pass pointers to data on their own stacks to other
threads, which is forbidden when CONFIG_KERNEL_COHERENCE (because
stack memory isn't cache-coherent). Make the variables static.
Also, queue had two sleeps of 2 ticks (having been written in an era
where that meant "20-30ms"), and on a device with a 50 kHz tick rate
that's not very much time at all. It would sometimes fail spuriously
because the spawned threads didn't consume the queue entries in time.
How about 10ms of real time instead?
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When we reach this code in interrupt context, our upper GPRs contain a
cross-stack call that may still include some registers from the
interrupted thread. Those need to go out to memory before we can do
our cache coherence dance here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Putting spinlocks (or things containing them) onto the stack is a
KERNEL_COHERENCE violation. This doesn't need to be there so just
make it static.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Both new thread creation and context switch had the same mistake in
cache management: the bottom of the stack (the "unused" region between
the lower memory bound and the live stack pointer) needs to be
invalidated before we switch, because otherwise any dirty lines we
might have left over can get flushed out on top of the same thread on
another CPU that is putting live data there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The Xtensa L1 cache layer has straightforward semantics accessible via
single-instructions that operate on cache lines via physical
addresses. These are very amenable to inlining.
Unfortunately the Xtensa HAL layer requires function calls to do this,
leading to significant code waste at the calling site, an extra frame
on the stack and needless runtime instructions for situations where
the call is over a constant region that could elide the loop. This is
made even worse because the HAL library is not built with
-ffunction-sections, so pulling in even one of these tiny cache
functions has the effect of importing a 1500-byte object file into the
link!
Add our own tiny cache layer to include/arch/xtensa/cache.h and use
that instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Back when I started work on this stuff, I had a set of notes on
register windows that slowly evolved into something that looks like
formal documentation. There really isn't any overview-style
documentation of this stuff on the public internet, so it couldn't
hurt to commit it here for posterity.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of passing the crt1 _start function as the entry code for
auxiliary CPUs, use a tiny assembly stub instead which can avoid the
runtime testing needed to skip the work in _start. All the crt1 code
was doing was clearing BSS (which must not happen on a second CPU) and
setting the stack pointer (which is wrong on the second CPU).
This allows us to clean out the SMP code in crt1.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr's normal architecture is to do all initialization in the
interrupt stacks. The CAVS code was traditionally written to start
the stack at the end of HP-SRAM, where it has no protection against
overlap with other uses (e.g. MP startup used the same region for
stacks and saw cache collisions, and the SOF heap lives in this area
too). Put it where Zephyr expects and we'll have fewer surprises.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The kernel passes the CPU's interrupt stack expected that it will
start on that, so do it. Pass the initial stack pointer from the SOC
layer in the variable "z_mp_stack_top" and set it in the assembly
startup before calling z_mp_entry().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There's no need to muck with the cache directly as long as we're
careful about addressing the shared start record through an uncached
volatile pointer.
Correct a theoretical bug with the initial cache invalidate on the
second CPU which was actually doing a flush (and thus potentially
pushing things the boot ROM wrote into RAM now owned by the OS).
Optimize memory layout a bit when using KERNEL_COHERENCE; we don't
need a full cache line for the start record there as it's already in
uncached memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The multiprocessor entry code here had some bits that look to have
been copied from esp32, including a clumsy stack switch that's needed
there. But it wasn't actually switching the stack at all, which on
this device is pointed at the top of HP-SRAM and can stay there until
the second CPU swaps away into a real thread (this will need to change
once we support >2 CPUS though).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The trace output layer was using this transformation already, make it
an official API. There are other places doing similar logic that can
benefit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This whole file is written to assume XEA2, so there's no value to
using an abstraction call here. Write to the RSIL instruction
directly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The xtensa atomics layer was written with hand-coded assembly that had
to be called as functions. That's needlessly slow, given that the low
level primitives are a two-instruction sequence. Ideally the compiler
should see this as an inline to permit it to better optimize around
the needed barriers.
There was also a bug with the atomic_cas function, which had a loop
internally instead of returning the old value synchronously on a
failed swap. That's benign right now because our existing spin lock
does nothing but retry it in a tight loop anyway, but it's incorrect
per spec and would have caused a contention hang with more elaborate
algorithms (for example a spinlock with backoff semantics).
Remove the old implementation and replace with a much smaller inline C
one based on just two assembly primitives.
This patch also contains a little bit of refactoring to address the
scheme has been split out into a separate header for each, and the
ATOMIC_OPERATIONS_CUSTOM kconfig has been renamed to
ATOMIC_OPERATIONS_ARCH to better capture what it means.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a bunch of dead historical cruft floating around in the
arch/xtensa tree, left over from older code versions. It's time to do
a cleanup pass. This is entirely refactoring and size optimization,
no behavior changes on any in-tree devices should be present.
Among the more notable changes:
+ xtensa_context.h offered an elaborate API to deal with a stack frame
and context layout that we no longer use.
+ xtensa_rtos.h was entirely dead code
+ xtensa_timer.h was a parallel abstraction layer implementing in the
architecture layer what we're already doing in our timer driver.
+ The architecture thread structs (_callee_saved and _thread_arch)
aren't used by current code, and had dead fields that were removed.
Unfortunately for standards compliance and C++ compatibility it's
not possible to leave an empty struct here, so they have a single
byte field.
+ xtensa_api.h was really just some interrupt management inlines used
by irq.h, so fold that code into the outer header.
+ Remove the stale assembly offsets. This architecture doesn't use
that facility.
All told, more than a thousand lines have been removed. Not bad.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Commit 6b84ab3830 ("kernel/sched: Adjust locking in z_swap()") moved
the call to arch_cohere_stacks() out of the scheduler lock while doing
some reorgnizing. On further reflection, this is incorrect. When
done outside the lock, the two arch_cohere_stacks() calls will race
against each other.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
I have not had time to work with USB recently, so removing myself from
MAINTAINERS and CODEOWNERS for the USB subsystem.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Coverity analysis reported following cases with side effect in assertion
(ASSERT_SIDE_EFFECT):
CID: 219574
CID: 219644
CID: 219659
Avoid issue by loading volatiles to local variables before assertion.
Fixes: #33079Fixes: #33042Fixes: #33030
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Serial Wire JTAG configuration option is made available
under condition that SPI_3 was not enabled on SOC_STM32F103XE.
Besides being obsolete there are various other potential conflicts
with other periphals, and it is not possible to explicit them all.
To make it more coherent remove such condition, assume that user
needs to take care of such pin conflict and express SWJ as having
precedence over peripheral devices pin configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
MCUboot recently gives possibility to signal its state
using led.
For leverage this feature need to provide proper alias
for the led gpio pin.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Mcuboot was updated to the version synchronized with
the upstream 5b7ed6a which introduces:
- Added LED support for signaling enter to the serial recovery mode
- Added boot delay/debonuce of serial detect pin.
- Fixed compilation warnings with ZEPHYR_LOG_MODE_MINIMAL
- Added optional check which prevents attempting to boot image that
has been build for different ROM address than a slot it currently
resides in. Check is enabled if image was signed with
IMAGE_F_ROM_FIXED flag.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Sometimes it is hard to tell which instance of a thread is which
in the printed list, based solely on the name (if present) and
the k_thread pointer, so also print the thread entry fn pointer.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Added comments to explain the re-use of allocated same
connection context to both 1M and coded PHY scanning context
when both PHY is enabled for initiating connection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Initial work in progress implementation of Create Connection
Cancel for Extended connection initiation.
Adds implementation to teardown connection initiated at ULL
layer and gracefully release allocated resources.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added low power configuration to testcase.yaml. In this mode
UARTE is disabled when RX and TX is not used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Lowest power consumption can be achieved when uarte peripheral
is disabled when not used. In low power mode, need for both
directions is tracked and if both are no in use peripheral is
disabled. TX disabling is instant but RX requires flushing RX
fifo because data in hardware fifo is lost when peripheral is
re-enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Refactored driver to prepare for low power extension. Functional
change is limited to handling of RX_DISABLED event which is now
generated from RXTO interrupt context after RX is stopped. Previously,
RX was not stopped after the transfer.
Rx flushing function contains hardware limitation workaround.
Workaround is applied only if flushed data is not discarded.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
People frequently do things like setting BOARD_ROOT to
/my/module/boards/arm/my_board when it should be set to /my/module.
Similar misconfigurations happen for SOC_ROOT.
Emit warnings in these situations to try to point users in the right
direction.
A similar change could be made for DTS_ROOT, but that is trickier
since at least one directory (the application root) is legitimately
added to it that does not always contain dts/ or include/
subdirectories.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The address pointer cannot be null at this point so remove
the checks.
Coverity-CID: 219595
Fixes#33071
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr docs state that timers will act as one-shot timers when started
with a period of K_NO_WAIT or K_FOREVER. However the code adjusting
period was setting K_FOREVER timeout ticks to 1 which caused the timer
to expire every tick. This adds a check to not adjust K_FOREVER periods
Signed-off-by: Eric Johnson <eric@liveathos.com>
New power states have more granularity than deep sleep and sleep
states. Just get rid of this and keep the same behavior for now.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Currently the power subsys is sending notifications about power state
changes before doing device pm. If one device fails to low power or
suspend the system never goes to an idle state. Change to send
notifications just before call SoC to suspend and avoid misleading
information.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_system_resume is always implemented when PM is enabled. There is no
need to have this weak function under an ifdef PM.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_system_resume_from_deep_sleep is not implemented or used
anywhere. Just remove it and keep the code base cleaner.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This function is useless and the state variable that it was
controlling is also not necessary because the same logic is being
handled by the variable post_ops_done.\
This reasonably simplifies idle thread logic.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is no need for this function. This function is called only in
one place and the code can be moved to the function that was calling
it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_power_state_force had two different behavior, if
CONFIG_PM_DIRECT_FORCE_MODE was enabled this function immediately
calls pm_system_suspend() without wait the idle thread. Without this
option enabled, this function will wait for the idle thread run but
will use the given power state instead of asking the policy manager.
The problem in both cases is that the process involves handling
devices and the way that was implemented if at least one device failed
to go to low power or suspended the system power state would not
change / be forced.
This commit simplifies this API removing the conditional behavior
since it is not clear the need for that and effectively, and
immediately, forces the system to go to the given state without
bother with devices.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
pm_system_suspend is called only from the idle thread and should
not be exported as a public API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The board specific interface in this sample is not handling errors.
Fix that by making board_init() return a negative error code or zero.
Rework the bbc_microbit specific board file by handling errors
appropriately and avoiding device_get_binding() to move some device
configuration errors to build time.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This structure contains a GPIO device, pin number, and devicetree
flags. Add helpers for getting one out of the devicetree and doing
useful initialization tasks with it.
Fixes: #31280
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The PRMsg service and backend had hardcoded and incorrectly named log
level. Created the Kconfig options for configuring log level of this
module.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Some modems, under some conditions, have a tendency to get stuck without
a connection due to cached state. We have observed this on some Simcom
LTE modems after large cellular outages. The modems are unable to escape
their cached state for some reason unless they're factory reset (or a
cache clearence is forced in some other way).
This commit allows for the modem to be factory reset at each boot. This
minimizes dependencies on external state by ensuring each power-up is as
similar as possible.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Fix#32918 [Coverity CID :219528] "Arguments in wrong order
in tests/drivers/pwm/pwm_loopback/src/main.c"
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Currently RAM region specified in the DT for board mps2-an512 to store
data (not to run code) is set to start at 0x3000_0000 and a 16M
contiguous space is assumed. However, at that address there is no such
contiguous space of 16M, rather only a 128K area is available. As a
consequence large applications linked with Zephyr might end up using
memory regions that are not valid, specially at runtime when the stack
grows, causing a BusFault.
Application Note 512 only specifies a 16M contiguous space available
starting at 0x8000_0000 (please see 'Table 3-4: SSRAM2 and SSRAM3
address mapping' and 'Table 3-6: External PSRAM mapping to Code Memory',
on pages 3-7 and 3-8, respectively), which resides in the PSRAM
(external RAM).
The AN521 also specifies a 4M contiguous space available starting at
0x3800_0000 which can be used as RAM for data storage and which is not
currently described in the DT.
The current DT also defines a 224M flash region (to run code) which
doesn't effectively exist, because most of it is reserved (~148M).
That commit fixes the incorrect definition of region 0x3000_0000 (16M)
and hence defines a new region called 'sram2_3' that maps to region
0x3800_0000 (4M) which is used as RAM to store data, and fixes the flash
region defining a new region 'sram1' (4M) from where code is executed
(starting at 0x1000_0000). The board has no real flash memory, rather an
auxilary HW populates the appropriate memory regions from images found
in a MicroSD card.
That commit also defines the missing PSRAM (16M) region ('psram') which
can be used by large programs as a general purpose RAM.
Finally, it also fixes the DT for the non-secure memory regions to
reflect the fixes described above for the secure memory regions.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
The mps2_an521_nonsecure exists for TFM and is also utilized as a config
for multicore samples. We can enable just the TFM tests with only_tags
and get a bit of additional coverage in QEMU for the TFM integration.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CORTEX_M_SYSTICK is enabled by default on all STM32 based targets,
in common soc Kconfig files.
Forcing its definition in board files is redundant and prevents
to disable it when activating LPTIM as ticker.
Remove these definitions
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Instead of listing Python dependencies in the docs, refer to the
requirements file. This way docs are never out of sync.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is easier to follow the user guide if each platform has its own tab
for requirements.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Current DW I2C driver uses 32 bit access for some registers and
16 bit access for others. So if DW I2C IP is connected via bus
which doesn't support 16 bit access we will get bus error.
Fix that by switching to 32 bit access only instead of 16
and 32 bit mix.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Use an "initiated" flag in the lll_conn struct to guard the processing
of PDUs related to connection initiation (CONNECT_IND,
AUX_CONNECT_RSP). This avoids races between ULL and LLL when creating
a connection.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
As this header declares a function that uses a cube defined structure
as argument, it should include the matching header.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Test to ensure that a reset with a waiting thread properly aborts the
wait, and the semaphore remains functional after.
Signed-off-by: James Harris <james.harris@intel.com>
Previously, a k_sem_reset with any outstanding waiting threads would
result in the semaphore in an inconsistent state, with more threads
waiting in the wait_q than the count would indicate.
Explicitly -EAGAIN any waiting threads upon k_sem_reset, to
ensure safety here.
Signed-off-by: James Harris <james.harris@intel.com>
check_interface resets the counter semaphore, but
net_config_init_by_iface first calls check_interface, then inits
the semaphore.
Initialize the semaphore up front to allow the k_sem_reset call
to work properly.
Signed-off-by: James Harris <james.harris@intel.com>
Debugging long-tail semaphore test failures currently is rather
annoying, both because many semaphore test failures do not print
their failing values, and because some semaphore tests do not
check return codes, leading to test failures well after the actual
failure.
Redo the semaphore tests to at least give consistent failure
messages including the actual return code and consistently check
return codes of k_sem_* APIs.
Also driveby-fix several places that used an insufficiently-
sized type to store k_uptime.
Signed-off-by: James Harris <james.harris@intel.com>
With _kernel_offset_to_nested, we only able to access the nested counter
of the first cpu. Since we are going to support SMP, we need accessing
nested from per cpu.
To get the current cpu, introduce z_arm64_curr_cpu for asm usage,
because arch_curr_cpu could not be compiled in asm code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add SMP support.
Note: there is still limitation that we rely on NUM CPUs.
And all cpus must be from 0,1,2 and ....
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This only fix several test cases failed while running code coverage
report inmps2_an385 platform. Enlarge the stack size for which failed
due to MPU fault of stack overflow.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
If Zephyr is running on a coprocessor we might lack I/O
such as uart or usb to output tracing datas but we might
have gigabytes of RAM available.
This patch allows to output trace datas to a ram buffer, which then
may be retrieved using gdb.
e.g:
(gdb) dump binary memory channel0_0 <ram_tracing_start> \
<ram_tracing_end>
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
In C, `void foo(void);` and `void foo();` mean subtly different things.
The former means "foo takes zero arguments"; the latter means
"foo takes an unspecified number of arguments". This can result in
calling convention mismatches in exceptional cases.
Change to emitting `(void)` instead of `()` for a syscall with
zero arguments.
Signed-off-by: James Harris <james.harris@intel.com>
There was an error in the ordering of the parameters in the
DEVICE_DT_DEFINE for the native POSIX counter. This made a project
using a counter built for native posix not being able to compile.
This commit switches places for ctr_init and device_pm_control_nop.
Signed-off-by: Tofik Sonono <tofik@sonono.me>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Remove stale references to v2m_musica in the ipc samples as the board
support for v2m_musca has been removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Maximum GIC SPI is 228, so maximum INTID is 228 + 32 = 260.
So, _sw_isr_table needs to support 260 entries
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
If a shell command is compiled out using SHELL_COND_CMD(),
a line for this command will still be printed but will
be blank. Change it so compiled out commands are not
listed as blank lines.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Added CLOCK_CONTROL_NRF_FORCE_ALT dependency to some options which
are not valid when clock is controlled by out-of-tree driver.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modified CLOCK_CONTROL_NRF_ACCURACY to represent integer value of
LF clock accuracy.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The test case suggests that "For most arch which support
userspace, derefencing NULL pointer will be caught by
exception.". This is certainly not true for Cortex-M, where
read access to address 0x0 is generally allowed. The reason
the test had been passing was either 1) because in many
Cortex-M platforms, including QEMU, address 0x0 is unmapped,
or 2) GCC is generating an undefining instruction. However,
now that we have activated the null pointer derefrencing
detection, we may end up with two exceptions and the test
would fail.
Change illegal access to something outside the mapped memory
area, e.g. 0xFFFFFFFF.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the arch/arm test suite there are tests running with
CONFIG_NO_OPTIMIZATIONS enabled, and may require a
larger idle thread stack size.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Temporarily save and restore all callee-saved registers
in the sub-routine, not only the frame pointer, to avoid
errors if compiler chooses to use them in the alternative
thread function. The callee-saved regs are restored after
the alternative thread switches back in.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The shim layer could in some circumstances not be properly
configured which would result in an unbound radio interrupt
handler.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This commit moves all hal_nordic radio driver code that is
strictly dependent on Zephyr into the Zephyr repository.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Its been 2 releases since we deprecated the old zephyr integer types.
We can now remove support for the Kconfig option, code, and, test to
allow the old int types to be supported.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add NET_HEXDUMP_DBG/ERR/WARN/INFO macros, then use them for new
MQTT_HEXDUMP_TRC/ERR/WARN/INFO macros.
Log struct mqtt_utf8 using MQTT_HEXDUMP_TRC. One cannot safely log
mqtt_utf8 strings due to no guarantee of a NULL terminator being
present. Also, logging without log_strdup() as if it were a NULL
terminated string asserts when CONFIG_LOG_IMMEDIATE=n. This solves
both issues.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Tests to exercise the new `cbprintf_package()`, `cbvprintf_package()`
and `cbpprintf()`.
[ Heavily based on a prior proposal from Peter Bigot. ]
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
In applications like logging the call site where arguments to
formatting are available may not be suitable for performing the
formatting, e.g. when the output operation can sleep. Add API that
supports capturing data that may be transient into a buffer that can
be saved, and API that then produces the output later using the
packaged arguments.
[ Documentation and commit log from Peter Bigot. ]
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Due to the recent changes to scheduler z_find_first_thread_to_unpend
& z_remove_thread_from_ready_q are not used anymore. So removing the
dead code.
fixes: #32691
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Any value passed to a function in <ctype.h> shall be
representable as an unsigned char or be the value EOF.
So changed type of variable to unsigned char.
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Switch to the new function.
Also initialize the private work structure at build time, rather than
on each iteration (it is not permitted to invoke work API on an
uninitialized work item).
The implementation here is racy: that a work item is pending does not
mean changes since it was first submitted are guaranteed to be seen
when the work item begins (began) executing.
A better solution would be to have transmit_message be able to
determine whether there is unprocessed work. Then the work item can
be submitted unconditionally.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Both uses in this file are fragile: that a work item is pending does
not mean changes since it was first submitted are guaranteed to be
seen when the work item begins (began) executing.
As long as this module is expected to be replaced by tcp2 it doesn't
seem worth trying to fix the logic, so just switch to the new function
name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Checking whether a work item is pending before submitting it is racy:
the item may be finishing up in its handler, and essentially
completed, in which case chosing not to resubmit would leave work
unhandled.
In this case it appears very wrong, since the sole call site in
net_if.c has just initialized the work item, which is not permitted if
the work item is pending.
Remove the check.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add Thalley (emil.gydesen@nordicsemi.no) and asbjornsabo
(asbjorn.sabo@nordicsemi.no) as additional maintainers/codeowners for
bluetooth audio.
(Also adds empty audio.h file, that will later be expanded, so that
the include/bluetooth/audio directory now listed in CODEOWNERS
actually exists.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Improve dynamic interrupt test cases of interrupt for platform such as
x86, x86_64, native_posix, this improve code coverage of it.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Enable the CONFIG_TEST switch in the test suite.
This allows certain required Kconfig settings for
ARM Cortex-M (which depend on TEST) to be enabled
when executing the test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The compiler generates a warning regarding a variable being used
w/o being initialized in certian configuration. According to the logic
that's not the case, so just add some initial value to the variable to
silence the compiler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As network interface array size might be larger than the actual
network interface count, check this condition and ignore those
interfaces that are not in use.
We cannot know for certain how many network interfaces there
are at built time, as the total count is only available at runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface index is very useful info to see in
debug prints so add those to debug output.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
While I'm in the idle code, let's clean this loop up. It was a really
bad #ifdef hell:
* Remove the CONFIG_TICKLESS_IDLE_THRESH logic (and the kconfig),
which never did anything but needlessly increase latency.
* Move the needed timeout logic from the main loop into
pm_save_idle(), which eliminates the special case for
!SYS_CLOCK_EXISTS.
Behavior (modulo that one kconfig) should be completely unchanged, and
now the inner part of the idle loop looks like:
while (true) {
(void) arch_irq_lock();
if (IS_ENABLED(CONFIG_PM)) {
pm_save_idle();
} else {
k_cpu_idle();
}
}
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This kconfig isn't actually exercised in this test, it's just being
used to compute some sleep durations. Also I want it gone.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The removal of the abort handling also absconded with an IRQ lock that
is required for reliable operation in the idle loop. Put it back.
Once the idle loop has made a decision to enter idle, any interrupt
that arrives needs to be masked and delivered AFTER the system enters
idle. Otherwise we run the risk of races where the system accepts and
processes an interrupt that should have prevented idle, but then goes
to sleep anyway having already made the decision.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CPython is sometimes described as "single threaded" due to the GIL,
but the interpreter will still "preemptively" switch between threads
(the details seem poorly documented).
So the time between checking whether acquire is 1 and decrementing the
count could result in more than one thread seeing an "available"
device, and more than one test being run (simultaneously, on the same
physical device!). We have a big herd of threads all polling for
this, so in a large test run this would happen maybe one time out of
20-30 tries.
Use a lock. Also remove the very similar looking
DUT.get_available_device() method, which had the same bug but appears
to be dead code.
Fixes#32679
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds weak sys_arch_reboot() function to avoid build error
with CONFIG_REBOOT=y. Some SoC has already had own reboot function
but others (Ex. qemu boards) faced buld error.
- openisa_rv32m1: Not change
- riscv-ite: Do nothing, remove and use arch/riscv function
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Instead of hardcoding the network interface value, use
net_if_ipv6_select_src_iface() so that proper network interface
gets used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are sending a network packet and if the remote address
is not set in the context (which means that connect() has not
been called), then we must set the target network interface
to a proper value.
This is done so that when we select the local source address,
we might select the wrong interface if we have multiple network
interfaces in the system. In this case the packet would be always
assigned to first network interface regardless of the destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove unnecessary main stack configuration in bluetooth samples.
The HCI power control sample does not need to set the main stack this
low, and setting it causes restriction on what the application can
change in menuconfig. A change in the entropy driver causes stack
overflow.
The HCI uart sample sets the main stack to the default size.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If files are changed for architecture code, then only run CI on those
architectures.
Combine all scripts into one and make it simpler.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improve default logging strdup buffer count and size.
The maximum string logged with Bluetooth is a 32-byte key in hex.
The strdup buffer is empty too often.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Log the security keys that the sniffer needs in order to sucessfully
decrypt the connection.
This option allows the sniffer to work in the cases where enabling
using the SMP debug keys is not wanted, either because it changes the
way the peer behaves or is denied by the peer.
It also enables the sniffer to decrypt a connection where the bond
already exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a name to the h4 rx thread.
It's useful to put a name on each thread for debugging, e.g., with the
shell's kernel threads command.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Convert allowed_cmds to an array of atomic_t of size 1.
This makes it future proof in case more commands are added.
Possibly silences coverity false positives on array vs singleton usage.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix some format warning in cfg_cli.c.
Fix use CID_VNAL as param when use vendor models.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fixed some undesired or incorrect macros, which
can cause build error.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Correct format errors, such as oob action 2-octers
should use 0x%04x, and action in prov capalilities pdu
big-ending. When every call `bt_mesh_auth_method_set<*>`
should also clear auth value, otherwise will case confirm
failed.
Provisioner role expect peer public key should be sent
immediately, instead of requiring ACK. After all, ACK may
be lost, and the other device’s public key will be sent
over, and provisioning procedure will be failed..
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Zero initialize the ch_handle in dma_pl330_configure().
The memset in dma_pl330_config_channel()is incorrect,
as the ch_handle is already populated with valid values and
the dma_pl330_config_channel() is overwriting with zeros.
Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com>
This sets the dts of dma for using the uart asynch api.
The stm32l475 has a dmamux with request 2 for Tx/Rx usart4
The Tx&Rx pins (PA0, PA1) of the usart4 are connected
on the disco_l475_iot1 board to pass the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
To remove the need of empty config files, the `board_check_revision()`
now accepts a list of valid revisions.
As example:
```
board_check_revision(
FORMAT MAJOR.MINOR.PATCH
VALID_REVISIONS 0.1.0 0.5.0 0.10.0
)
```
The code is still compatible with the `<board>_<revision>.conf` changes
so that if different revisions of a board has Kconfig differences, then
there is no need to also specify the list of valid revisions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
AArch64 has support for PSCI. This is especially useful for SMP because
PSCI is used to power on the secordary cores.
When the PSCI driver was introduced in Zephyr it was designed to rely on
a very PSCI-centric subsystem / interface.
There are two kinds of problems with this choice:
1. PSCI is only defined for the non-secure world and it is designed to
boot CPU cores into non-secure state (that means that PSCI is only
supposed to work if Zephyr is running in non-secure state)
2. There can be other ways or standards used to start / stop a core
different from PSCI
This patch is trying to fix the original wrong assumption by making the
interface / subsystem a generic one, called 'pm_cpu_ops', and using PSCI
only as an actual driver that is a user of this new interface /
subsystem.
For now the new subsystem is only exposing two methods: cpu_on and
cpu_off, others will probably follow according to the needs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
There is no strict reason to use assembly for the reset routine. Move as
much code as possible to C code using the proper helpers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Introduce C helpers for common assembly operations and preprocessor
constructors to create helper functions to read / write system
registers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The name for registers and bit-field in the cpu.h file is incoherent and
messy. Refactor the whole file using the proper suffixes for bits,
shifts and masks.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The Semtech SX1272MB2DAS shield is populated with a SX1272 LoRa
transceiver. The base board must provide Arduino header pins
definitions.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The cmd_write and cmd_ctunc have been opening/creating file for
read/write operation.
The commit changes cmd_write to open/create file for write only,
and cmd_trunc to only open file for write.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The way these scripts looked for the current working directory
was not correct or reliable. With this change it should
work properly.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The README gives as example the command to build
the sample with west. The path of the sample as
stated does not exist. This fixes it to blinky_pwm.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
When instructed to flash the combined Secure and Non-Secure
binary, we need to modify the hex file used in west flash.
The combined binary is named tfm_merged.hex, regardless of
building with or without BL2.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In nRF5340, instruct the build to flash, by default, the
combined Secure (TF-M) and Non-Secure (Zephyr) binaries
as a merged binary, using west flash, if we are building
in-tree tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introduce an option to instruct the build system
to flash the Non-Secure (Zephyr) firmware image
together with the TF-M (Secure) firmware image
as a single merged binary, instead of just flashing
the Non-Secure application.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add devicetree node representing the PCAL6408A I2C-based I/O expander
that is available in nRF9160 DK v0.14.0 or later.
Provide also .dtsi files that can be used in applications to simplify
switching to interfacing onboard LEDs and buttons through this expander
instead of SoC pins.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the multiple board revisions feature to provide support for the new
hardware possibilities available in nRF9160 DK starting from v0.14.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use devicetree instead of Kconfig to configure the board control
switches in nRF9160 DK:
- add binding for the switches that provide optional signal routings
on this board
- add binding for the GPIO interface that can be used for communication
(e.g. UART based) between the nRF9160 and the nRF52840 on the DK,
and add GPIO mapping for this interface so that its lines can be used
without caring about of actual pin numbers on both sides
- add binding for one GPIO line chosen from the above interface that is
to allow the nRF9160 to reset the nRF52840
- update accordingly dts files and board specific code for both board
definitions associated with the DK
- introduce .dtsi files that can be included from dts overlays in order
to facilitate the use of the above GPIO interface; modify the overlay
in the hci_uart sample to provide an example of use of those files
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is a hardcoded macro in Winc1500 HAL SPI driver
that would prevent the driver from working.
This macro is now defined only based on KConfig entry.
This KConfig entry is by default not set.
To enable, set "CONFIG_WINC1500_DRV_USE_OLD_SW=y"
in proj.conf or board.conf
Signed-off-by: Raja D. Singh <rdsingh@iotwizards.com>
This adds a new qemu_x86_virt board where code and data are
mapped in virtual address space and is actually executing within
virtual address space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When the kernel links in virtual address space, the data
structures needed for the z_phys_map() no longer point to physical
addresses (which are required for z_phys_map() to work). So skips
these tests if CONFIG_KERNEL_LINK_IN_VIRT=y.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For some unknown reason, the pagetable address for _df_tss.cr3
did not get translated from virtual to physical. However,
the translation is done if the pointer to pagetable is obtained
through reference to the first array element (instead of simply
through the name of array). Without CR3 pointing to the page
table via physical address, double fault does not work. So
fixing this by being explicit with the page table pointer.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When adding a new thread to memory domain, there is a NULL check
to figure out if a thread is being migrated to another memory
domain. However, the NULL check is AFTER physical-to-virtual
address translation which means (NULL + offset) != NULL anymore.
This results in calling reset_region() with an invalid page table
pointer. Fix this by doing the NULL check before address
translation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When linking in virtual address space, we still need physical
addresses in SRAM to be mapped so platform can boot from physical
memory and to access structure necessary for boot (e.g. GDT and
IDT). So we need to enlarge the reserved space for page table
to accommodate this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We have been having the assumption that the physical memory
is identity-mapped to virtual address space. However, with
the ability to set CONFIG_KERNEL_VM_BASE separately from
CONFIG_SRAM_BASE_ADDRESS, the assumption is no longer valid.
This changes the boot code in x86 32-bit, so that once
the page table is loaded, we can proceed with executing in
the virtual address space. So do a long jump to virtual
address just before calling z_x86_prep_c. From this point on,
code execution is in virtual address space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When linking in virtual address space, we still need physical
addressed in SRAM to be mapped so platform can boot from physical
memory and to access structure necessary for boot (e.g. GDT and
IDT). So identity maps the kernel in SRAM.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When the kernel is mapped into virtual address space
that is different than the physical address space,
the dynamic GDT generation uses the virtual addresses.
However, the GDT table is required at boot before
page table is loaded where the virtual addresses are
invalid. So make sure GDT generation is using
physical addresses.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is an assumption made in the page table generation code
that the kernel would occupy the same physical and virtual
addresses. However, we may want to map the kernel into
a virtual address space which differs from kernel's physical
address space. For example, with demand paging enabled on
kernel code and data, we can accommodate kernel that is
larger than physical memory size, and may want to utilize
a bigger virtual address space. So add address translation
in the gen_mmu.py script for this.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds virtual address translation to a few variables
used in crt0.S. This is needed as they are linked at
virtual addresses but before page table is loaded,
they are not available at virtual addresses and must be
referred via physical addresses.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When feeding &z_shared_kernel_page_start directly to
Z_X86_PHYS_ADDR(), the compiler would complain array subscript
out of bound if linking in virtual address space. So cast it
into uintptr_t first before translation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
checkpatch misinterprets the macro that generates event data
structures as being code rather than more data. This code has not
been changed, but rearrangement of code around it causes a false
positive when the aggregate changes are checked for style.
Add an extra line to eliminate the warning.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now that the old API has been reimplemented with the new API remove
the old implementation and its tests.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The new API cannot be used from userspace because it is not merely a
wrapper around existing userspace-capable objects (threads and
queues), but instead requires much more complex and lower-level access
to memory that can't be touched from userspace. The vast majority of
work queue users are operating from privileged mode, so there's little
motivation to go through the pain and complexity of converting all
functions to system calls.
Copy the necessary pieces of the existing userspace work queue API out
and expose them with new names and types:
* k_work_handler_t becomes k_work_user_handler_t
* k_work becomes k_work_user
* k_work_q becomes k_work_user_q
etc. Because the replacement API cannot use the same types new API
names are also introduced to make it more clear that the userspace
work queue API is a separate functionality.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace legacy API with new API. Note that this driver uses the
schedule, not reschedule, API, since triggers for delay never overlap.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Switch the default and clean up some test workarounds. This will enable
final conversions necessary to transition to the new API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The tcp2 infrastructure is using the legacy delayed work API, and
relies heavily on the transient state indicated by an estimate of
delayed time remaining to determine whether a delayed work item is
still active. While the wrappers for this work in most cases, one use
is unsanctioned: directly accessing the fields of k_delayed_work
structure to satisfy the calling parameters of the handler when
invoked directly.
The chosen solution for this specific need in the new API is to use a
schedule (rather than reschedule) operation, which leaves any previous
timer unchanged but allows immediate submission if the work is idle.
This changes behavior in that the resend is delegated to the work
queue, rather than done immediately. The former behavior can be
supported by further refactoring that turns the work handler into a
wrapper around a function that takes a connection reference, and
invoking that here, while the handler invokes it after reconstructing
the connection from the contained work item.
For now put in a hack that also uses the non-public fields of the
delayed work structure to implement the required behavior. The
complete fix if this solution is used requires replacing all use of
k_delayed_work in this module with k_work_delayable, leveraging the
new functionality of the API to avoid having to guess about the true
state of a work item based on its transient timer or flag states.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Revise the description of queues, work items, and delayable work items
to reflect the terminology and API provided by the new implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit provides a complete reimplementation of the work queue
infrastructure intended to eliminate the race conditions and feature
gaps in the existing implementation.
Both bare and delayable work structures are supported. Items can be
submitted; delayable items can be scheduled for submission at a future
time. Items can be delayed, queued, and running all at the same time.
A running item can also be canceling.
The new implementation:
* replaces "pending" with "busy" which identifies the active states;
* supports canceling delayed and submitted items;
* prevents resubmission of a item being canceled until cancellation
completes;
* supports waiting for cancellation to complete;
* supports flushing a work item (waiting for the last submission to
complete without preventing resubmission);
* supports waiting for a queue to drain (only allows resubmission from
the work thread);
* supports stopping a work queue in conjunction with draining it;
* prevents handler-reentrancy during resubmission.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Attempts to reimplement the existing work API using a new work
implementation failed, primarily due to heavy use of whitebox testing
in validating the original API. Add a temporary Kconfig that will
select between the two implementations so we can use the same
identifiers but select which implementation they reference.
This commit just adds the selection infrastructure and uses it to
conditionalize the existing implementation in anticipation of the new
one in the next commit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These functions are a subset of proposed public APIs to clean up
several issues related to safely handling waking of threads. They
have been made private as they interface may change, but their use
will simplify the reimplementation of the k_work functionality.
See: https://github.com/zephyrproject-rtos/zephyr/pull/29668
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The work poll API is defined in terms of the k_work API. Shift a
structure definition around so it's not within the details of a
specific k_work API implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This is needed because Zephyr libraries created after
`find_package(Zephyr)` are not pure Zephyr libraries, as they are not
in the `whole-archive` linking grouping.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The DMA bindings had duplicate description: keys. Merge the two
descriptions into one to fix the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to a single platform, we
prefer native_posix, than a qemu platform mps2_an385 and finally a
hardware platform.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Force the Arduino Due device to preform a reset after loading
the program using JLink, effectively allowing the program to
run after west flash.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Several internal APIs wrote thread attributes (return value, mainly)
_after_ calling `z_ready_thread`. This is unsafe, at least in SMP,
because another core could have already picked up and run the thread.
Fixes#32800.
Signed-off-by: James Harris <james.harris@intel.com>
Now that pinmux driver holds a table of GPIO device pointers,
use gpio device as the single source of trust for gpio_base
and remove use of port_base and related code.
This way, gpio_stm32_configure could directly take gpio device
pointer as argument.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use new gpio_stm32_clock_request function for GPIO clocks control.
To do this a new table of GPIO devices is set up at build time.
It is then used to populate targeted device when calling
gpio_stm32_clock_request.
Clean up remaining clock handling related code in the file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As a preparation for GPIO ports clocks power management,
add a dedicated central function fog GPIO ports clock toggling.
This function is made accessible to other users (pinmux).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On L4/L5 device, GPIO port G benefits from a dedicated supply
rail that should be enabled independently.
Review the code around this:
-Compile only when port G is enabled
-Assume that PWR clock is ON, as it is enabled as part of clock init
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Commit 821c03a14a ("i2c: nordic: switch
to phandle arrays for pinmux") deprecated some Nordic devicetree
properties.
When boards get merged with stale CI results (i.e. if CI results are
from a mainline commit earlier than 821c03a1), we will get deprecation
warnings, which twister treats as errors.
Play whack-a-mole with the ones that are in tree.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make sure the flags in EXTRA_DTC_FLAGS are valid for the version of dtc
we have and only invoke dtc with flags it supports.
Fixes#32644
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use EXTRA_GEN_DEFINES_ARGS to error out on deprecated devicetree
properties when warnings are treated as errors.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Allow users to set the new EDT constructor argument which errors out
on deprecated properties via a command line argument.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We'd like to start eliminating deprecated properties from upstream
Zephyr devicetrees. To make that possible in the build system, add an
EDT kwarg that does just that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Many data items that are represented in a pin configuration node are
common and generic. Pin control bindings should use the properties
defined on a standard way when are applicable; not all of these
properties are relevant or useful for all hardware or binding
structures. Each individual binding document should state which of
these generic properties, if any, are used, and the structure of the
DT nodes that contain these properties.
This is based on Linux, documentation:
https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these tests to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these tests to just mps2_an385. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to a single platform, we
prefer native_posix, than a qemu platform mps2_an385 and finally a
hardware platform.
For the 'basic' sample we use native_posix, for the 'rtt' we use
frdm_k64f ad we need a hardware platform that supports 'rtt', and for
the 'usermode' we utilize 'mps2_an385' as we can run in QEMU.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 6bf761fc0a ("dts: Remove support
for deprecated DTS binding syntax") removed most of the support for
the 'legacy' bindings syntax.
A few straggler keys are still around in the bindings check code,
though. This allows some legacy keys which should cause errors to pass
silently instead.
Fix the error handling and print good errors for cases which are
removed, just in case someone is still using them somewhere.
Clean up some other error messages in the same function while we're
here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Inferred bindings (already mentioned above) make some text lower down
a bit inaccurate. Fix it up.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This lets an application detect when a PPP connection fails to establish
or terminates, so that the connection can be reattempted (for example,
by setting carrier off and on).
Signed-off-by: Jim Paris <jim@jim.sh>
Each vector slot has room for 32 instructions. The exception context
saving needs 15 instructions already. Rather than duplicating those
instructions in each out-of-line exception routines, let's store
them directly in the vector table. That vector space is otherwise
wasted anyway. Move the z_arm64_enter_exc macro into vector_table.S
as this is the only place where it should be used.
To further reduce code size, let's make z_arm64_exit_exc into a
function of its own to avoid code duplication again. It is put in
vector_table.S as this is the most logical location to go with its
z_arm64_enter_exc counterpart.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The DMA module the i2s_sam_ssc relies on cannot change during the
runtime. Store pointer to dev_dma in flash, not in RAM. The new
implementation saves 40 bytes of flash and 32 bytes of RAM.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Set integration_platforms on these tests to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set SEARCH_PATH to "." instead of `pwd` if not set explicitly. This
avoids the construction of paths that contain `pwd` twice in test
scripts such as ll.1.sh.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
a0 is used as scratch register. Restore value of a0 (return address)
from stack frame before spilling registers on stack
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Document the GATT APIs not waiting for TX context when being called
from the system workqueue context. This is because the TX contexts
are freed by the system workqueue so blocking would cause a deadlock.
The number of TX contexts are by default equal to the number of
TX buffers in the system. Since TX contexts is allocated after a buffer,
but freed from a lower priority than the buffer then there can be more
allocated TX contexts than TX buffers.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the incorrect documentation note about the indication callback
being called from the system workqueue.
The callback will be called by the RX thread once the confirm indication
response has been received.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Assert if the null pointer de-referencing detection (via DWT) is
enabled when the processor is in debug mode, because the debug
monitor exception can not be triggered in debug mode (i.e. the
behavior is unpredictable). Add a note in the Kconfig definition
of the null-pointer detection implementation via DWT, stressing
that the solution requires the core be in normal mode.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added an entry in the release notes for v2.6.0 release,
mentioning the support for null pointer dereferencing
detection.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce build time asserts for
CONFIG_CORTEX_M_DEBUG_NULL_POINTER_EXCEPTION_PAGE_SIZE
to catch that the user-supplied value has, as requested
by the Kconfig symbol specification, a power of 2 value.
For the MPU-based implementation of null-pointer detection
we can use an existing macro for the build time assert,
since the region for catching null-pointer exceptions
is a regular MPU region, with different restrictions,
depending on the MPU architecture. For the DWT-based
implementation, we introduce a custom build-time assert.
We add also a run-time ASSERT for the MPU-based
implementation in ARMv8-M platforms, which require
that the null pointer exception detection page is
already mapped by the MPU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a test case for the null pointer dereferencing detection
feature in Cortex-M. The test case is added in arm_interrupt
test suite and the README file is updated accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
By design, the DebugMonitor exception is only employed
for null-pointer dereferencing detection, and enabling
that feature is not supported in Non-Secure builds. So
when enabling the DebugMonitor exception, assert that
it is not targeting the Non Secure domain.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable the null-pointer dereferencing detection by default
throughout the test-suite. Explicitly disable this for the
gen_isr_table test which needs to perform vector table reads.
Disable null-pointer exception detection on qemu_cortex_m3
board, as DWT it is not emulated by QEMU on this platform.
Additionally, disable null-pointer exception detection on
mps2_an521 (QEMU target), as DWT is not present and the MPU
based solution won't work, since the target does not have
the area 0x0 - 0x400 mapped, but the QEMU still permits
read access.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implementation for null pointer exception detection feature
using the MPU on Cortex-M. Null-pointer detection is implemented
by programming an MPU to guard a limited area starting at
address 0x0. on non ARMv8-M we program an MPU region with
No-access policy. On ARMv8-M we program a region with any
permissions, assuming the region will overlap with fixed
FLASH0 region. We add a compile-time message to warn the
user if the MPU-based null-pointer exception solution can
not be used (ARMv8-M only).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Padding inserted after the (first-stage) vector table,
so that the Zephyr image does not attempt to use the
area which we reserve to detect null pointer dereferencing
(0x0 - <size>). If the end of the vector table section is
higher than the upper end of the reserved area, no padding
will be added. Note also that the padding will be added
only once, to the first stage vector table, even if the current
snipped is included multiple times (this is for a corner case,
when we want to use this feature together with SW Vector Relaying
on MCUs without VTOR but with an MPU present).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Additions to the null-pointer exception detection mechanism
for ARMv8-M Mainline MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implement the functionality to detect null pointer dereference
exceptions via the DWT unit in the ARMv7-M Mainline MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When we enable the null pointer exceptino feature (using DWT)
we include debug.c in the build. debug.c contains the functions
to configure and enable null pointer detection using the Data
Watchdog and Trace unit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Extend the debug monitor exception handler to
- return recoverable faults when the debug monitor
is enabled but we do not get an expected DWT event,
- call a debug monitor routine to check for null pointer
exceptions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the DWT utility functions, present in timing.c
in an internal cortex-m header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introduce the required Kconfig symbol framework for the
Cortex-M-specific null pointer dereferencing detection
feature. There are two implementations (based on DWT and
MPU) so we introduce the corresponding choice symbols,
including a choice symbol to signify that the feature
is to be disabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Either get priority from devicetree (liteeth) or remove Kconfig symbols
that aren't used anywhere for IRQ priority (gecko, stm32_hal).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The stream_flash_buffered_write, when invoked to do flush write, will
attempt to write the tail bytes from the buffer, filling the required
minimal write block size with erase value bytes; after write it rewinds
the buffer offset, bytes_written, by number of the "filler bytes".
Doe to lack of return code processing from flash_sync call, two things
would happen to context in case of failure:
1) the ctx->bytes_written would be rewind pass the value it had before
function call as it gets decremented by "filler bytes" even if write
failed;
2) the ctx->buf_bytes offset would be accounting for added "filler
bytes" which should not be counted as data in buffer.
Proper processing of return code has been added to remove effects
described above.
Unit tests have been expended to cover the scenarios.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The stream_flash_buffered_write used to read byte from flash, in front
of the current buffer pointer, to obtain value of errased flash;
the code has been replaced with obtaining the value from flash
parameters.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves block that checks if flash_stream_ctx.buf_bytes
is non-zero out of CONFIG_STREAM_FLASH_ERASE specific code, as that is
universal check and is valid also for not CONFIG_STREAM_FLASH_ERASE
code.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The flash_sync function is able to call, if specified, write
verification callback to check whether data flash has been correctly
written to a flash. Part of that procedure is to read date back of
the flash and call the verification callback on the buffer;
in case if the read would fail, the flash_sync would return,
with an error code, without updating stream_flash_ctx.
The same logic should be applied to failed verification, but, due to
missing return, the stream_flash_ctx gets updated with probably
incorrectly written bytes added to total bytes_written and buf_bytes,
representing number of bytes awaiting in buffer, being zeroed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The stream_flash_erase_page would update stream_flash_ctx member
last_erased_page_start_offset, to page offset it attempted to erase,
even if such operation failed.
The commit changes this behaviour so that in case of failure the
last_erased_page_start_offset would still hold previously, successfully,
erase page offset.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Such instance is needed for building drivers that use DEVICE_DT_GET()
to get the pointer to the GPIO controller device structure.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove unused symbols and related sections from the linker script. In
particular CONFIG_IS_BOOTLOADER and CONFIG_CODE_DATA_RELOCATION are not
currently supported on AArch64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Looking at the data sheet for the npcx section 4.15.5 CR_UART Core
Registers, the UICTRL register that is used in the npcx poll
functions is invalid when running in FIFO mode. Instead, calls to
uart_npcx_poll_in and uart_npcx_poll_out should be redirected to
their respective FIFO read/fill functions (when using interrupts).
Changes:
- When calling uart_poll_in: forward the request to uart_fifo_read.
- When calling uart_poll_out: loop until uart_fifo_fill returns
non-0 (we wrote 1 byte).
Signed-off-by: Yuval Peress <peress@chromium.org>
Simple reorg of the function declarations. This change moves
the interrupt driven functions declared at the bottom of the
uart_npcx.c file to the top, clustered under the same ifdef.
Signed-off-by: Yuval Peress <peress@chromium.org>
All dma drivers are devicetree based now so we can remove the last
bits of Kconfig associated with the old driver style.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can utilize the devicetree macros to determine which instances to
enable. This will allow us to phase out the per instance Kconfig
symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Nothing sets the op mode to anything but master. For now default the
mode to master-only and we can determine a devicetree property in the
future if we need to support other configurations.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace Kconfig symbols SPI_DW_PORT_n_INTERRUPT_SINGLE_LINE with just
seeing how many IRQs are defined in the devicetree to determine single
or multiline interrupt support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SoC that utilized the clock support isn't supported in Zephyr
anymore and there are no users of this code. Remove it for now as it
should get converted to utilize devicetree if needed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The compiler was inserting additional redundant loads in many
`sys_dlist_*` APIs, in case writes aliased with previous reads.
However, these additional reads are unnecessary, as the only cases
where the aliasing would matter would be a violation of the `dlist`
API contract (e.g. if node->next == node but node->prev != node).
This is decidedly a micro-optimization.
Signed-off-by: James Harris <james.harris@intel.com>
Enable the driver for the Kinetis Digital-to-Analog (DAC) modules
present in the NXP Kinetis K2x SoC series.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Add device tree nodes for the Digital-to-Analog (DAC) modules present
in the NXP Kinetis K2x series.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
`z_impl_k_yield` unlocked sched_spinlock, only to lock it again
immediately, do a little bit more work, then unlock it again.
This causes performance issues on SMP, where `sched_spinlock`
is often fairly highly contended and cores often end up spinning
for quite a while waiting to retake the lock in `z_swap_unlocked`.
Instead directly pass the spinlock key to `z_swap` and avoid the
extra lock+unlock.
Signed-off-by: James Harris <james.harris@intel.com>
`z_is_t1_higher_prio_than_t2` was being called twice in both the
context-switch fastpath and in `z_priq_rb_lessthan`, just to
dealing with priority ties. In addition, the API was error-prone
(and too much in the fastpath to be able to assert its invarients)
- see also #32710 for a previous example of this API breaking
and returning a>b but also b>a.
Replacing this with a direct 3-way comparison `z_cmp_t1_prio_with_t2`
sidesteps most of these issues. There is still a concern that
`sgn(z_cmp_t1_prio_with_t2(a,b)) != -sgn(z_cmp_t1_prio_with_t2(b,a))`
but I don't see any way to alleviate this aside from adding an
assert to the fastpath.
Signed-off-by: James Harris <james.harris@intel.com>
The funky order was necessary when registers were stored using a
sequence of `stp x(n), x(n+1), [sp, #-16]!`. Now that absolute offsets
are being used, we can restore natural ordering.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Replace device_get_binding with DEVICE_DT_GET for getting access
to the io-channels/adc controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace device_get_binding with DEVICE_DT_GET for getting access
to the io-channels/adc controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace device_get_binding with DEVICE_DT_GET for getting access
to the io-channels/adc controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace device_get_binding with DEVICE_DT_GET for getting access
to the io-channels/adc controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If next_timeout() returns INT_MAX and pass it to
z_clock_set_timeout(), and machine goes to freeze or slow down.
Bad scenario as follows:
- If an argument int32_t ticks is set large value 0xffffffff,
ticks = MAX(MIN(ticks - 1, (int32_t)MAX_TICKS), 0);
replaces it into MAX_TICKS.
- uint32_t cyc will be set near by 0xffffffff
(this is 0xfffd7280 in 100 ticks per second).
- Add adjustment to cyc, adjustment max value is MAX_CYC.
(cyc = 0xffff14fd)
- Over 0x80000000 value of uint32_t is considered as negative
value of int32_t.
if ((int32_t)(cyc + last_count - now) < MIN_DELAY)
This condition is always true.
- Because cyc += CYC_PER_TICK will get overflow, driver sets mtimecmp
near value of current mtime.
(cyc = 0x00007fc0)
- Next timer interrupt will happen soon after return from interrupt
handler.
- By repeating these events, machine cannot go to next instruction,
and it's going to freeze or slow down.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Add some testcases to tesing different condition of mailbox
API. Check API robust in different input parameters is handled.
such as invoke API to get data with NULL input.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Move the ticker job_guard reset to after
ticker_job_compare_update, so that the ticks_current and
ticks_slot_previous are updated before ticker_worker gets
to execute. Without this fix, there is a possibility that
ticker_worker will use incorrect ticks_slot_previous and
ticks_current value under race conditions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker job to defer itself to avoid recursive
invocation to itself due to ticker interface calls from
inside the ticker operation callbacks.
The recursive use was exposed when using ticker stop
operation callback of stopping an auxiliary PDU to stop
the primary PDU scheduling as part of generation of
Advertising Terminate event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conver the NIOS-II mSGDMA driver to be devicetree based. Add node for
dma controller into nios2f.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In case the endpoint string provided by the application is longer or
equal to CLIENT_EP_LEN - 1, the strncpy() function will not add the NULL
terminator. As the endpoint buffer is treated as a C-string in other
places in the code, make sure it's NULL terminated by adding NULL
explicitly at the end of the buffer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure query string used by the lwm2m_rd_client is large enough to
encode any query string that can be sent during bootstrap/registration.
As the maximum query string length is related to the endpoint name,
which is limited by `CONFIG_LWM2M_RD_CLIENT_ENDPOINT_NAME_MAX_LENGTH`,
make the query string corellated to the value of this config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This introduces the support for CRC32C (Castagnoli) algorithm.
The generator polynomial used is 0x1EDC6F41UL.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Set integration_platforms on these samples to just frdm_k64f.
This should be sufficient to make sure these tests build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds to network shell set of basic commands for UDP
protocol to receive and send datagrams.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes: #32269
This commit is a followup to #31877 where the `${shield_dir}/${s_dir}`
was adjusted to `${SHIELD_DIR_${s}}` to ensure only including shields
and not boards in list of known shields.
An `if(EXISTS ${shield_dir}/${s_dir}...)` was missed in this process
which causes #32269. This is corrected in this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add some testcases to test some unnormal branches,
for covering branches that not covered.Meanwhile,
Using the public fatal handler function to handle
fatal errors.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
When running the tests of the async api of uart
on nucleo-l4r5zi we get MPU fault.
The reason is ordering initialization. The uart and dma
drivers are initialized PRE_KERNEL_1 while dmamux is
initialized POST_KERNEL.
Thus, the function device_get_binding fails since the
dmamux device is not ready to be used.
Fixes: #32715.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Convert how the dma test gets the dma device to use DEVICE_DT_GET
and remove use of CONFIG_DMA_0_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The cmd_read function uses fs_open with FS_O_CREATE | FS_O_RDWR flags
to open file it will only read; the flags has been changed
to FS_O_READ.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Convert driver and users of pinmux on mcux lpc platforms to getting
basic port info from devicetree (register address, label)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I only see one sample with an overlay using the now legacy sda-pin and
scl-pin properties. Move it to the new style.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the BOARD.dts files for Nordic-based boards to use the new I2C
devicetree properties for specifying the SDA and SCL pins.
This was done with a script.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Deprecate the scl-pin and sda-pin properties in the devicetree.
Provide new scl-gpios and sda-gpios properties instead.
This lets the user specify SCL and SDA like this:
&i2c0 {
scl-gpios = <&gpio0 1 0>;
sda-gpios = <&gpio1 4 0>;
};
Instead of having to use:
&i2c0 {
scl-pin = <1>;
sda-pin = <36>;
};
Provide error checking and understandable error messages for invalid
configurations.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add some helper macros that will be convenient to use from device
drivers for accessing and error checking pin mux information in the
devicetree:
- NRF_DT_PSEL(): get a PSEL value out of the DT from either a
'foo-pin' or a 'foo-gpios' style property.
- NRF_DT_PSEL_CHECK_NOT_BOTH(), NRF_DT_PSEL_CHECK_EXACTLY_ONE():
helpers for checking that a given devicetree is OK according to
different criteria for setting PSEL properties (NAND or XOR on
whether the properties exist, respectively).
See comments in the patch for more details.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Enable CONFIG_TEST in the message_capture test suite.
This allows certain Kconfig configurations, depending
on TEST, to be enabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Modify an example by adding command that is using shell_getopt funtion.
Extent sample.yaml with getopt configuration.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This functionality is is enabled by setting CONFIG_SHELL_GETOPT.
It is not active by default.
User can call following functions inside command handlers:
- shell_getopt - getopt function based on freebsd implementation
- shell_getopt_status_get - returns getopt status
Beware when getopt functionality is enabled shell will not parse
command handler to look for "-h" or "--help" options and print
help message automatically.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This library is going to be used by the shell module. Some shell users
are not satisfied with subcommands alone and need to use the options
for commands as well.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
We expect to have more libraries with incopatible license. There must
be a common place for such software. It seems that lib/util is good
place for that.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell will not "steal" by default "-h" and "--help" each time
help functions are enabled.
This change is necessary to implement and use the getopt library.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The most common secure monitor firmware in the ARM world is TF-A. The
current release allows up to 8 64-bit values to be returned from a
SMC64 call from AArch64 state.
Extend the number of possible return values from 4 to 8.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Instead of relying on hardcoded offset in the assembly code, introduce
the offset macros to make the code more clear.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The current code is assuming that the SMC/HVC helpers can only be used
by the PSCI driver. This is wrong because a mechanism to call into the
secure monitor should be made available regardless of using PSCI or not.
For example several SoCs relies on SMC calls to read/write e-fuses,
retrieve the chip ID, control power domains, etc...
This patch introduces a new CONFIG_HAS_ARM_SMCCC symbol to enable the
SMC/HVC helpers support and export that to drivers that require it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Check NULL value when we are trying to print link address
because the link address can be null.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the input string can be allocated from stack, we need to use
log_strdup() in net_pkt_hexdump() to print the extra string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a dependency on TEST_ARM_CORTEX_M switch, so it
only gets switched on when building tests, not samples,
as originally intended.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove inclusion of vendor specific internal LLL include
files in ULL source code.
Prefix `lll/` include file path to correctly include vendor
defined types and function implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Removed printk.h include from log_core.h.
Since LOG_PRINTK cannot be enabled with LOG_MINIMAL removed
support for both.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We default to use the "label" properties of a devicetree node as the
name if it exists. If the "label" does not exist we than use the
node-name@unit-address for the node as the name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow the test to run for non-secure firmware builds, by
removing the test-case for nonsense string, as this test-case
will likely produce a secure fault which will crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
usb_hid_descriptor struct is only used internally and
is not intended to be used by the USB HID device application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add common HID definitions header and move common macros
from USB HID header to common HID header.
The header can thus be used by Bluetooth HID profile or
others independently of USB subsystem.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
tests/kernel/interrupt tests interrupt trigger functionality,
however, the Non-Secure Cortex-M mode does not have full control
of the interrupt handling, so this test cannot be guaranteed to
pass when executing in Non-Secure mode. Filter the test out for
Non-Secure Cortex-M builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Exclude the test_null_dynamic_name test-suite from running the
test, in Non-Secure mode (Cortex-M), because passing a NULL
device name de-references memory at 0x0 which is likely to
cause a SecureFault and crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is fundamental enough that it better be initialized ASAP.
Many other things get initialized soon afterwards assuming the MMU
is already operational.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Location of __kernel_ram_start is too far and _app_smem .bss areas
are not covered. Use _image_ram_start instead.
Location of __kernel_ram_end is also way too far. We should stop at
_image_ram_end where the expected unmapped area starts.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is easier to cover multiple segments this way. Especially since
not all boundary symbols from the linker script come with a size
derrivative.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The MT_OVERWRITE case is much more common. Redefine that flag as
MT_NO_OVERWRITE instead for those fewer cases where it is needed.
One such case is platform provided mappings. Apply them after the
common kernel mappings and use the MT_NO_OVERWRITE on them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is no real reason for keeping page tables into separate pools.
Make it global which allows for more efficient memory usage and
simplifies the code.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce a remove_map() to ... remove a mapping.
Add a use count to the page table pool so pages can be dynamically
allocated, deallocated and reused.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Several variables must be set by the time boilerplate.cmake is run.
This includes BOARD, SHIELD, CONF_FILE, and DTC_OVERLAY_FILE.
It's not always clear to users that this is the case, and we sometimes
see attempts to modify these variables in app CMakeLists.txt files
after find_package(Zephyr ...) lines, where they will have no effect.
This causes confusion.
Add a new extension function, zephyr_boilerplate_watch(), which traps
attempts to set these variables and prints a noisy warning. Use it
from boilerplate.cmake on the variables mentioned above.
This will hopefully make it clearer at build time why the changes are
being ignored.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert ism330dhcx INT_PIN attribute from Kconfigs to Device
Tree binding properties. Here int-pin has been defined as
enum with two possible values: 1 and 2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert ism330dhcx accel and gyro odr attributes from Kconfigs to Device
Tree binding properties.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Converts ism330dhcx accel and gyro range attributes from Kconfigs to
Device Tree binding properties.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Create a common properties file that will be included by all bindings
(as i2c and spi) handled by ism330dhcx driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Recursive macros are more generic but they are very depending for
preprocessor. When they are used extensively they can prolong
compilation even ten times. Replaced them with brute force
implementation for:
- FOR_EACH macros
- GET_N_ARG
- GET_ARGS_LESS_N
- UTIL_LISTIFY
- UTIL_REPEAT
New implementation provides same functionality but it is limited to 64
input arguments. This is not a hard limitation and can be increased
in the future.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
